summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-bcm63xx.c149
1 files changed, 89 insertions, 60 deletions
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index f01b2648452e..63b0028a8bd3 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -1,7 +1,7 @@
/*
* Broadcom BCM63xx SPI controller support
*
- * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org>
* Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
*
* This program is free software; you can redistribute it and/or
@@ -30,6 +30,8 @@
#include <linux/spi/spi.h>
#include <linux/completion.h>
#include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/pm_runtime.h>
#include <bcm63xx_dev_spi.h>
@@ -96,17 +98,12 @@ static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = {
{ 391000, SPI_CLK_0_391MHZ }
};
-static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
- struct spi_transfer *t)
+static int bcm63xx_spi_check_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
{
- struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
u8 bits_per_word;
- u8 clk_cfg, reg;
- u32 hz;
- int i;
bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
- hz = (t) ? t->speed_hz : spi->max_speed_hz;
if (bits_per_word != 8) {
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
__func__, bits_per_word);
@@ -119,6 +116,19 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
return -EINVAL;
}
+ return 0;
+}
+
+static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+ u32 hz;
+ u8 clk_cfg, reg;
+ int i;
+
+ hz = (t) ? t->speed_hz : spi->max_speed_hz;
+
/* Find the closest clock configuration */
for (i = 0; i < SPI_CLK_MASK; i++) {
if (hz <= bcm63xx_spi_freq_table[i][0]) {
@@ -139,8 +149,6 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
clk_cfg, hz);
-
- return 0;
}
/* the spi->mode bits understood by this driver: */
@@ -165,7 +173,7 @@ static int bcm63xx_spi_setup(struct spi_device *spi)
return -EINVAL;
}
- ret = bcm63xx_spi_setup_transfer(spi, NULL);
+ ret = bcm63xx_spi_check_transfer(spi, NULL);
if (ret < 0) {
dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
spi->mode & ~MODEBITS);
@@ -190,28 +198,29 @@ static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
bs->remaining_bytes -= size;
}
-static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
+static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
+ struct spi_transfer *t)
{
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
u16 msg_ctl;
u16 cmd;
+ /* Disable the CMD_DONE interrupt */
+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+
dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
t->tx_buf, t->rx_buf, t->len);
/* Transmitter is inhibited */
bs->tx_ptr = t->tx_buf;
bs->rx_ptr = t->rx_buf;
- init_completion(&bs->done);
if (t->tx_buf) {
bs->remaining_bytes = t->len;
bcm63xx_spi_fill_tx_fifo(bs);
}
- /* Enable the command done interrupt which
- * we use to determine completion of a command */
- bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
+ init_completion(&bs->done);
/* Fill in the Message control register */
msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
@@ -230,33 +239,76 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
bcm_spi_writew(bs, cmd, SPI_CMD);
- wait_for_completion(&bs->done);
- /* Disable the CMD_DONE interrupt */
- bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+ /* Enable the CMD_DONE interrupt */
+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
return t->len - bs->remaining_bytes;
}
-static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
+static int bcm63xx_spi_prepare_transfer(struct spi_master *master)
{
- struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
- struct spi_transfer *t;
- int ret = 0;
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
- if (unlikely(list_empty(&m->transfers)))
- return -EINVAL;
+ pm_runtime_get_sync(&bs->pdev->dev);
- if (bs->stopping)
- return -ESHUTDOWN;
+ return 0;
+}
+
+static int bcm63xx_spi_unprepare_transfer(struct spi_master *master)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+
+ pm_runtime_put(&bs->pdev->dev);
+
+ return 0;
+}
+
+static int bcm63xx_spi_transfer_one(struct spi_master *master,
+ struct spi_message *m)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+ struct spi_transfer *t;
+ struct spi_device *spi = m->spi;
+ int status = 0;
+ unsigned int timeout = 0;
list_for_each_entry(t, &m->transfers, transfer_list) {
- ret += bcm63xx_txrx_bufs(spi, t);
- }
+ unsigned int len = t->len;
+ u8 rx_tail;
- m->complete(m->context);
+ status = bcm63xx_spi_check_transfer(spi, t);
+ if (status < 0)
+ goto exit;
- return ret;
+ /* configure adapter for a new transfer */
+ bcm63xx_spi_setup_transfer(spi, t);
+
+ while (len) {
+ /* send the data */
+ len -= bcm63xx_txrx_bufs(spi, t);
+
+ timeout = wait_for_completion_timeout(&bs->done, HZ);
+ if (!timeout) {
+ status = -ETIMEDOUT;
+ goto exit;
+ }
+
+ /* read out all data */
+ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
+
+ /* Read out all the data */
+ if (rx_tail)
+ memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
+ }
+
+ m->actual_length += t->len;
+ }
+exit:
+ m->status = status;
+ spi_finalize_current_message(master);
+
+ return 0;
}
/* This driver supports single master mode only. Hence
@@ -267,39 +319,15 @@ static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
struct spi_master *master = (struct spi_master *)dev_id;
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
u8 intr;
- u16 cmd;
/* Read interupts and clear them immediately */
intr = bcm_spi_readb(bs, SPI_INT_STATUS);
bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
bcm_spi_writeb(bs, 0, SPI_INT_MASK);
- /* A tansfer completed */
- if (intr & SPI_INTR_CMD_DONE) {
- u8 rx_tail;
-
- rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-
- /* Read out all the data */
- if (rx_tail)
- memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
-
- /* See if there is more data to send */
- if (bs->remaining_bytes > 0) {
- bcm63xx_spi_fill_tx_fifo(bs);
-
- /* Start the transfer */
- bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
- SPI_MSG_CTL);
- cmd = bcm_spi_readw(bs, SPI_CMD);
- cmd |= SPI_CMD_START_IMMEDIATE;
- cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
- bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
- bcm_spi_writew(bs, cmd, SPI_CMD);
- } else {
- complete(&bs->done);
- }
- }
+ /* A transfer completed */
+ if (intr & SPI_INTR_CMD_DONE)
+ complete(&bs->done);
return IRQ_HANDLED;
}
@@ -345,7 +373,6 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
}
bs = spi_master_get_devdata(master);
- init_completion(&bs->done);
platform_set_drvdata(pdev, master);
bs->pdev = pdev;
@@ -379,7 +406,9 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
master->bus_num = pdata->bus_num;
master->num_chipselect = pdata->num_chipselect;
master->setup = bcm63xx_spi_setup;
- master->transfer = bcm63xx_transfer;
+ master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer;
+ master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
+ master->transfer_one_message = bcm63xx_spi_transfer_one;
bs->speed_hz = pdata->speed_hz;
bs->stopping = 0;
bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 03:08:05 +0100