diff options
Diffstat (limited to 'drivers/spi')
38 files changed, 2090 insertions, 1241 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 2e188e1127eb..f80eee74a311 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -88,7 +88,7 @@ config SPI_BFIN_SPORT config SPI_AU1550 tristate "Au1550/Au1200/Au1300 SPI Controller" - depends on MIPS_ALCHEMY && EXPERIMENTAL + depends on MIPS_ALCHEMY select SPI_BITBANG help If you say yes to this option, support will be included for the @@ -188,7 +188,7 @@ config SPI_IMX config SPI_LM70_LLP tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" - depends on PARPORT && EXPERIMENTAL + depends on PARPORT select SPI_BITBANG help This driver supports the NS LM70 LLP Evaluation Board, @@ -204,7 +204,7 @@ config SPI_MPC52xx config SPI_MPC52xx_PSC tristate "Freescale MPC52xx PSC SPI controller" - depends on PPC_MPC52xx && EXPERIMENTAL + depends on PPC_MPC52xx help This enables using the Freescale MPC52xx Programmable Serial Controller in master SPI mode. @@ -273,8 +273,8 @@ config SPI_OMAP_100K OMAP SPI 100K master controller for omap7xx boards. config SPI_ORION - tristate "Orion SPI master (EXPERIMENTAL)" - depends on PLAT_ORION && EXPERIMENTAL + tristate "Orion SPI master" + depends on PLAT_ORION help This enables using the SPI master controller on the Orion chips. @@ -297,9 +297,20 @@ config SPI_PPC4xx help This selects a driver for the PPC4xx SPI Controller. +config SPI_PXA2XX_PXADMA + bool "PXA2xx SSP legacy PXA DMA API support" + depends on SPI_PXA2XX && ARCH_PXA + help + Enable PXA private legacy DMA API support. Note that this is + deprecated in favor of generic DMA engine API. + +config SPI_PXA2XX_DMA + def_bool y + depends on SPI_PXA2XX && !SPI_PXA2XX_PXADMA + config SPI_PXA2XX tristate "PXA2xx SSP SPI master" - depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL + depends on ARCH_PXA || PCI || ACPI select PXA_SSP if ARCH_PXA help This enables using a PXA2xx or Sodaville SSP port as a SPI master @@ -307,7 +318,7 @@ config SPI_PXA2XX additional documentation can be found a Documentation/spi/pxa2xx. config SPI_PXA2XX_PCI - def_bool SPI_PXA2XX && X86_32 && PCI + def_tristate SPI_PXA2XX && PCI config SPI_RSPI tristate "Renesas RSPI controller" @@ -317,7 +328,7 @@ config SPI_RSPI config SPI_S3C24XX tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C24XX && EXPERIMENTAL + depends on ARCH_S3C24XX select SPI_BITBANG help SPI driver for Samsung S3C24XX series ARM SoCs @@ -432,7 +443,7 @@ config SPI_XCOMM config SPI_XILINX tristate "Xilinx SPI controller common module" - depends on HAS_IOMEM && EXPERIMENTAL + depends on HAS_IOMEM select SPI_BITBANG help This exposes the SPI controller IP from the Xilinx EDK. @@ -444,7 +455,7 @@ config SPI_XILINX config SPI_NUC900 tristate "Nuvoton NUC900 series SPI" - depends on ARCH_W90X900 && EXPERIMENTAL + depends on ARCH_W90X900 select SPI_BITBANG help SPI driver for Nuvoton NUC900 series ARM SoCs @@ -478,7 +489,6 @@ comment "SPI Protocol Masters" config SPI_SPIDEV tristate "User mode SPI device driver support" - depends on EXPERIMENTAL help This supports user mode SPI protocol drivers. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 64e970ba261c..e53c30941340 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -47,7 +47,10 @@ obj-$(CONFIG_SPI_OMAP24XX) += spi-omap2-mcspi.o obj-$(CONFIG_SPI_ORION) += spi-orion.o obj-$(CONFIG_SPI_PL022) += spi-pl022.o obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o -obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o +spi-pxa2xx-platform-objs := spi-pxa2xx.o +spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_PXADMA) += spi-pxa2xx-pxadma.o +spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o +obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o obj-$(CONFIG_SPI_RSPI) += spi-rspi.o obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c index 5e7314ac51e9..a537f8dffc09 100644 --- a/drivers/spi/spi-altera.c +++ b/drivers/spi/spi-altera.c @@ -134,7 +134,7 @@ static int altera_spi_txrx(struct spi_device *spi, struct spi_transfer *t) hw->tx = t->tx_buf; hw->rx = t->rx_buf; hw->count = 0; - hw->bytes_per_word = (t->bits_per_word ? : spi->bits_per_word) / 8; + hw->bytes_per_word = t->bits_per_word / 8; hw->len = t->len / hw->bytes_per_word; if (hw->irq >= 0) { diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index 9a5d7791c5fb..e504b7636058 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -24,17 +24,24 @@ #include <linux/spi/spi_bitbang.h> #include <linux/bitops.h> #include <linux/gpio.h> +#include <linux/clk.h> +#include <linux/err.h> #include <asm/mach-ath79/ar71xx_regs.h> #include <asm/mach-ath79/ath79_spi_platform.h> #define DRV_NAME "ath79-spi" +#define ATH79_SPI_RRW_DELAY_FACTOR 12000 +#define MHZ (1000 * 1000) + struct ath79_spi { struct spi_bitbang bitbang; u32 ioc_base; u32 reg_ctrl; void __iomem *base; + struct clk *clk; + unsigned rrw_delay; }; static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg) @@ -52,6 +59,12 @@ static inline struct ath79_spi *ath79_spidev_to_sp(struct spi_device *spi) return spi_master_get_devdata(spi->master); } +static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned nsecs) +{ + if (nsecs > sp->rrw_delay) + ndelay(nsecs - sp->rrw_delay); +} + static void ath79_spi_chipselect(struct spi_device *spi, int is_active) { struct ath79_spi *sp = ath79_spidev_to_sp(spi); @@ -83,15 +96,8 @@ static void ath79_spi_chipselect(struct spi_device *spi, int is_active) } -static int ath79_spi_setup_cs(struct spi_device *spi) +static void ath79_spi_enable(struct ath79_spi *sp) { - struct ath79_spi *sp = ath79_spidev_to_sp(spi); - struct ath79_spi_controller_data *cdata; - - cdata = spi->controller_data; - if (spi->chip_select && !cdata) - return -EINVAL; - /* enable GPIO mode */ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO); @@ -101,44 +107,48 @@ static int ath79_spi_setup_cs(struct spi_device *spi) /* TODO: setup speed? */ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); +} - if (spi->chip_select) { - int status = 0; +static void ath79_spi_disable(struct ath79_spi *sp) +{ + /* restore CTRL register */ + ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl); + /* disable GPIO mode */ + ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); +} - status = gpio_request(cdata->gpio, dev_name(&spi->dev)); - if (status) - return status; +static int ath79_spi_setup_cs(struct spi_device *spi) +{ + struct ath79_spi_controller_data *cdata; + int status; - status = gpio_direction_output(cdata->gpio, - spi->mode & SPI_CS_HIGH); - if (status) { - gpio_free(cdata->gpio); - return status; - } - } else { + cdata = spi->controller_data; + if (spi->chip_select && !cdata) + return -EINVAL; + + status = 0; + if (spi->chip_select) { + unsigned long flags; + + flags = GPIOF_DIR_OUT; if (spi->mode & SPI_CS_HIGH) - sp->ioc_base |= AR71XX_SPI_IOC_CS0; + flags |= GPIOF_INIT_HIGH; else - sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + flags |= GPIOF_INIT_LOW; + + status = gpio_request_one(cdata->gpio, flags, + dev_name(&spi->dev)); } - return 0; + return status; } static void ath79_spi_cleanup_cs(struct spi_device *spi) { - struct ath79_spi *sp = ath79_spidev_to_sp(spi); - if (spi->chip_select) { struct ath79_spi_controller_data *cdata = spi->controller_data; gpio_free(cdata->gpio); } - - /* restore CTRL register */ - ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl); - /* disable GPIO mode */ - ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); } static int ath79_spi_setup(struct spi_device *spi) @@ -184,7 +194,11 @@ static u32 ath79_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs, /* setup MSB (to slave) on trailing edge */ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out); + ath79_spi_delay(sp, nsecs); ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK); + ath79_spi_delay(sp, nsecs); + if (bits == 1) + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out); word <<= 1; } @@ -198,6 +212,7 @@ static int ath79_spi_probe(struct platform_device *pdev) struct ath79_spi *sp; struct ath79_spi_platform_data *pdata; struct resource *r; + unsigned long rate; int ret; master = spi_alloc_master(&pdev->dev, sizeof(*sp)); @@ -236,12 +251,39 @@ static int ath79_spi_probe(struct platform_device *pdev) goto err_put_master; } + sp->clk = clk_get(&pdev->dev, "ahb"); + if (IS_ERR(sp->clk)) { + ret = PTR_ERR(sp->clk); + goto err_unmap; + } + + ret = clk_enable(sp->clk); + if (ret) + goto err_clk_put; + + rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ); + if (!rate) { + ret = -EINVAL; + goto err_clk_disable; + } + + sp->rrw_delay = ATH79_SPI_RRW_DELAY_FACTOR / rate; + dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n", + sp->rrw_delay); + + ath79_spi_enable(sp); ret = spi_bitbang_start(&sp->bitbang); if (ret) - goto err_unmap; + goto err_disable; return 0; +err_disable: + ath79_spi_disable(sp); +err_clk_disable: + clk_disable(sp->clk); +err_clk_put: + clk_put(sp->clk); err_unmap: iounmap(sp->base); err_put_master: @@ -256,6 +298,9 @@ static int ath79_spi_remove(struct platform_device *pdev) struct ath79_spi *sp = platform_get_drvdata(pdev); spi_bitbang_stop(&sp->bitbang); + ath79_spi_disable(sp); + clk_disable(sp->clk); + clk_put(sp->clk); iounmap(sp->base); platform_set_drvdata(pdev, NULL); spi_master_put(sp->bitbang.master); @@ -263,9 +308,15 @@ static int ath79_spi_remove(struct platform_device *pdev) return 0; } +static void ath79_spi_shutdown(struct platform_device *pdev) +{ + ath79_spi_remove(pdev); +} + static struct platform_driver ath79_spi_driver = { .probe = ath79_spi_probe, .remove = ath79_spi_remove, + .shutdown = ath79_spi_shutdown, .driver = { .name = DRV_NAME, .owner = THIS_MODULE, diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index ab34497bcfee..656d137db253 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1088,7 +1088,7 @@ static struct platform_driver atmel_spi_driver = { .suspend = atmel_spi_suspend, .resume = atmel_spi_resume, .probe = atmel_spi_probe, - .remove = __exit_p(atmel_spi_remove), + .remove = atmel_spi_remove, }; module_platform_driver(atmel_spi_driver); diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c index 4de66d1cfe51..44dd34b6ad09 100644 --- a/drivers/spi/spi-au1550.c +++ b/drivers/spi/spi-au1550.c @@ -717,7 +717,7 @@ static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw) } } -static void __init au1550_spi_setup_psc_as_spi(struct au1550_spi *hw) +static void au1550_spi_setup_psc_as_spi(struct au1550_spi *hw) { u32 stat, cfg; @@ -766,7 +766,7 @@ static void __init au1550_spi_setup_psc_as_spi(struct au1550_spi *hw) } -static int __init au1550_spi_probe(struct platform_device *pdev) +static int au1550_spi_probe(struct platform_device *pdev) { struct au1550_spi *hw; struct spi_master *master; @@ -968,7 +968,7 @@ err_nomem: return err; } -static int __exit au1550_spi_remove(struct platform_device *pdev) +static int au1550_spi_remove(struct platform_device *pdev) { struct au1550_spi *hw = platform_get_drvdata(pdev); @@ -997,7 +997,7 @@ static int __exit au1550_spi_remove(struct platform_device *pdev) MODULE_ALIAS("platform:au1550-spi"); static struct platform_driver au1550_spi_drv = { - .remove = __exit_p(au1550_spi_remove), + .remove = au1550_spi_remove, .driver = { .name = "au1550-spi", .owner = THIS_MODULE, diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index f44ab5508535..9578af782a77 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -37,6 +37,8 @@ #define PFX KBUILD_MODNAME +#define BCM63XX_SPI_MAX_PREPEND 15 + struct bcm63xx_spi { struct completion done; @@ -49,16 +51,10 @@ struct bcm63xx_spi { unsigned int msg_type_shift; unsigned int msg_ctl_width; - /* Data buffers */ - const unsigned char *tx_ptr; - unsigned char *rx_ptr; - /* data iomem */ u8 __iomem *tx_io; const u8 __iomem *rx_io; - int remaining_bytes; - struct clk *clk; struct platform_device *pdev; }; @@ -175,24 +171,17 @@ static int bcm63xx_spi_setup(struct spi_device *spi) return 0; } -/* Fill the TX FIFO with as many bytes as possible */ -static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs) -{ - u8 size; - - /* Fill the Tx FIFO with as many bytes as possible */ - size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes : - bs->fifo_size; - memcpy_toio(bs->tx_io, bs->tx_ptr, size); - bs->remaining_bytes -= size; -} - -static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi, - struct spi_transfer *t) +static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first, + unsigned int num_transfers) { struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); u16 msg_ctl; u16 cmd; + u8 rx_tail; + unsigned int i, timeout = 0, prepend_len = 0, len = 0; + struct spi_transfer *t = first; + bool do_rx = false; + bool do_tx = false; /* Disable the CMD_DONE interrupt */ bcm_spi_writeb(bs, 0, SPI_INT_MASK); @@ -200,25 +189,45 @@ static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi, dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", t->tx_buf, t->rx_buf, t->len); - /* Transmitter is inhibited */ - bs->tx_ptr = t->tx_buf; - bs->rx_ptr = t->rx_buf; + if (num_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND) + prepend_len = t->len; - if (t->tx_buf) { - bs->remaining_bytes = t->len; - bcm63xx_spi_fill_tx_fifo(bs); + /* prepare the buffer */ + for (i = 0; i < num_transfers; i++) { + if (t->tx_buf) { + do_tx = true; + memcpy_toio(bs->tx_io + len, t->tx_buf, t->len); + + /* don't prepend more than one tx */ + if (t != first) + prepend_len = 0; + } + + if (t->rx_buf) { + do_rx = true; + /* prepend is half-duplex write only */ + if (t == first) + prepend_len = 0; + } + + len += t->len; + + t = list_entry(t->transfer_list.next, struct spi_transfer, + transfer_list); } + len -= prepend_len; + init_completion(&bs->done); /* Fill in the Message control register */ - msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); + msg_ctl = (len << SPI_BYTE_CNT_SHIFT); - if (t->rx_buf && t->tx_buf) + if (do_rx && do_tx && prepend_len == 0) msg_ctl |= (SPI_FD_RW << bs->msg_type_shift); - else if (t->rx_buf) + else if (do_rx) msg_ctl |= (SPI_HD_R << bs->msg_type_shift); - else if (t->tx_buf) + else if (do_tx) msg_ctl |= (SPI_HD_W << bs->msg_type_shift); switch (bs->msg_ctl_width) { @@ -232,14 +241,41 @@ static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi, /* Issue the transfer */ cmd = SPI_CMD_START_IMMEDIATE; - cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); + cmd |= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); bcm_spi_writew(bs, cmd, SPI_CMD); /* Enable the CMD_DONE interrupt */ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); - return t->len - bs->remaining_bytes; + timeout = wait_for_completion_timeout(&bs->done, HZ); + if (!timeout) + return -ETIMEDOUT; + + /* read out all data */ + rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); + + if (do_rx && rx_tail != len) + return -EIO; + + if (!rx_tail) + return 0; + + len = 0; + t = first; + /* Read out all the data */ + for (i = 0; i < num_transfers; i++) { + if (t->rx_buf) + memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len); + + if (t != first || prepend_len == 0) + len += t->len; + + t = list_entry(t->transfer_list.next, struct spi_transfer, + transfer_list); + } + + return 0; } static int bcm63xx_spi_prepare_transfer(struct spi_master *master) @@ -264,41 +300,76 @@ static int bcm63xx_spi_transfer_one(struct spi_master *master, struct spi_message *m) { struct bcm63xx_spi *bs = spi_master_get_devdata(master); - struct spi_transfer *t; + struct spi_transfer *t, *first = NULL; struct spi_device *spi = m->spi; int status = 0; - unsigned int timeout = 0; - + unsigned int n_transfers = 0, total_len = 0; + bool can_use_prepend = false; + + /* + * This SPI controller does not support keeping CS active after a + * transfer. + * Work around this by merging as many transfers we can into one big + * full-duplex transfers. + */ list_for_each_entry(t, &m->transfers, transfer_list) { - unsigned int len = t->len; - u8 rx_tail; - status = bcm63xx_spi_check_transfer(spi, t); if (status < 0) goto exit; - /* configure adapter for a new transfer */ - bcm63xx_spi_setup_transfer(spi, t); + if (!first) + first = t; + + n_transfers++; + total_len += t->len; + + if (n_transfers == 2 && !first->rx_buf && !t->tx_buf && + first->len <= BCM63XX_SPI_MAX_PREPEND) + can_use_prepend = true; + else if (can_use_prepend && t->tx_buf) + can_use_prepend = false; + + /* we can only transfer one fifo worth of data */ + if ((can_use_prepend && + total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) || + (!can_use_prepend && total_len > bs->fifo_size)) { + dev_err(&spi->dev, "unable to do transfers larger than FIFO size (%i > %i)\n", + total_len, bs->fifo_size); + status = -EINVAL; + goto exit; + } + + /* all combined transfers have to have the same speed */ + if (t->speed_hz != first->speed_hz) { + dev_err(&spi->dev, "unable to change speed between transfers\n"); + status = -EINVAL; + goto exit; + } - while (len) { - /* send the data */ - len -= bcm63xx_txrx_bufs(spi, t); + /* CS will be deasserted directly after transfer */ + if (t->delay_usecs) { + dev_err(&spi->dev, "unable to keep CS asserted after transfer\n"); + status = -EINVAL; + goto exit; + } + + if (t->cs_change || + list_is_last(&t->transfer_list, &m->transfers)) { + /* configure adapter for a new transfer */ + bcm63xx_spi_setup_transfer(spi, first); - timeout = wait_for_completion_timeout(&bs->done, HZ); - if (!timeout) { - status = -ETIMEDOUT; + /* send the data */ + status = bcm63xx_txrx_bufs(spi, first, n_transfers); + if (status) goto exit; - } - /* read out all data */ - rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); + m->actual_length += total_len; - /* Read out all the data */ - if (rx_tail) - memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail); + first = NULL; + n_transfers = 0; + total_len = 0; + can_use_prepend = false; } - - m->actual_length += t->len; } exit: m->status = status; diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c index ac7ffca7ba47..39b0d1711b4e 100644 --- a/drivers/spi/spi-bfin-sport.c +++ b/drivers/spi/spi-bfin-sport.c @@ -416,8 +416,7 @@ bfin_sport_spi_pump_transfers(unsigned long data) drv_data->cs_change = transfer->cs_change; /* Bits per word setup */ - bits_per_word = transfer->bits_per_word ? : - message->spi->bits_per_word ? : 8; + bits_per_word = transfer->bits_per_word; if (bits_per_word % 16 == 0) drv_data->ops = &bfin_sport_transfer_ops_u16; else diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 0429d833f75b..317f564c899c 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -642,8 +642,7 @@ static void bfin_spi_pump_transfers(unsigned long data) drv_data->cs_change = transfer->cs_change; /* Bits per word setup */ - bits_per_word = transfer->bits_per_word ? : - message->spi->bits_per_word ? : 8; + bits_per_word = transfer->bits_per_word; if (bits_per_word % 16 == 0) { drv_data->n_bytes = bits_per_word/8; drv_data->len = (transfer->len) >> 1; @@ -1274,7 +1273,7 @@ static int bfin_spi_destroy_queue(struct bfin_spi_master_data *drv_data) return 0; } -static int __init bfin_spi_probe(struct platform_device *pdev) +static int bfin_spi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct bfin5xx_spi_master *platform_info; diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index 8b3d8efafd3c..a63d7da3bfe2 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -69,7 +69,7 @@ static unsigned bitbang_txrx_8( unsigned ns, struct spi_transfer *t ) { - unsigned bits = t->bits_per_word ? : spi->bits_per_word; + unsigned bits = t->bits_per_word; unsigned count = t->len; const u8 *tx = t->tx_buf; u8 *rx = t->rx_buf; @@ -95,7 +95,7 @@ static unsigned bitbang_txrx_16( unsigned ns, struct spi_transfer *t ) { - unsigned bits = t->bits_per_word ? : spi->bits_per_word; + unsigned bits = t->bits_per_word; unsigned count = t->len; const u16 *tx = t->tx_buf; u16 *rx = t->rx_buf; @@ -121,7 +121,7 @@ static unsigned bitbang_txrx_32( unsigned ns, struct spi_transfer *t ) { - unsigned bits = t->bits_per_word ? : spi->bits_per_word; + unsigned bits = t->bits_per_word; unsigned count = t->len; const u32 *tx = t->tx_buf; u32 *rx = t->rx_buf; @@ -427,40 +427,41 @@ EXPORT_SYMBOL_GPL(spi_bitbang_transfer); */ int spi_bitbang_start(struct spi_bitbang *bitbang) { - int status; + struct spi_master *master = bitbang->master; + int status; - if (!bitbang->master || !bitbang->chipselect) + if (!master || !bitbang->chipselect) return -EINVAL; INIT_WORK(&bitbang->work, bitbang_work); spin_lock_init(&bitbang->lock); INIT_LIST_HEAD(&bitbang->queue); - if (!bitbang->master->mode_bits) - bitbang->master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; + if (!master->mode_bits) + master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; - if (!bitbang->master->transfer) - bitbang->master->transfer = spi_bitbang_transfer; + if (!master->transfer) + master->transfer = spi_bitbang_transfer; if (!bitbang->txrx_bufs) { bitbang->use_dma = 0; bitbang->txrx_bufs = spi_bitbang_bufs; - if (!bitbang->master->setup) { + if (!master->setup) { if (!bitbang->setup_transfer) bitbang->setup_transfer = spi_bitbang_setup_transfer; - bitbang->master->setup = spi_bitbang_setup; - bitbang->master->cleanup = spi_bitbang_cleanup; + master->setup = spi_bitbang_setup; + master->cleanup = spi_bitbang_cleanup; } - } else if (!bitbang->master->setup) + } else if (!master->setup) return -EINVAL; - if (bitbang->master->transfer == spi_bitbang_transfer && + if (master->transfer == spi_bitbang_transfer && !bitbang->setup_transfer) return -EINVAL; /* this task is the only thing to touch the SPI bits */ bitbang->busy = 0; bitbang->workqueue = create_singlethread_workqueue( - dev_name(bitbang->master->dev.parent)); + dev_name(master->dev.parent)); if (bitbang->workqueue == NULL) { status = -EBUSY; goto err1; @@ -469,7 +470,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) /* driver may get busy before register() returns, especially * if someone registered boardinfo for devices */ - status = spi_register_master(bitbang->master); + status = spi_register_master(master); if (status < 0) goto err2; diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index 1366c4620d5d..a11cbf02691a 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -68,7 +68,7 @@ static int spi_clps711x_setup_xfer(struct spi_device *spi, struct spi_transfer *xfer) { u32 speed = xfer->speed_hz ? : spi->max_speed_hz; - u8 bpw = xfer->bits_per_word ? : spi->bits_per_word; + u8 bpw = xfer->bits_per_word; struct spi_clps711x_data *hw = spi_master_get_devdata(spi->master); if (bpw != 8) { diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c index 58466b810da4..7b5cc9e4e94d 100644 --- a/drivers/spi/spi-coldfire-qspi.c +++ b/drivers/spi/spi-coldfire-qspi.c @@ -329,8 +329,7 @@ static int mcfqspi_transfer_one_message(struct spi_master *master, mcfqspi_cs_select(mcfqspi, spi->chip_select, cs_high); mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE); - if ((t->bits_per_word ? t->bits_per_word : - spi->bits_per_word) == 8) + if (t->bits_per_word == 8) mcfqspi_transfer_msg8(mcfqspi, t->len, t->tx_buf, t->rx_buf); else diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 13661e129d96..8234d2259722 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -28,6 +28,8 @@ #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/edma.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> #include <linux/slab.h> @@ -135,7 +137,7 @@ struct davinci_spi { int dma_rx_chnum; int dma_tx_chnum; - struct davinci_spi_platform_data *pdata; + struct davinci_spi_platform_data pdata; void (*get_rx)(u32 rx_data, struct davinci_spi *); u32 (*get_tx)(struct davinci_spi *); @@ -213,7 +215,7 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value) bool gpio_chipsel = false; dspi = spi_master_get_devdata(spi->master); - pdata = dspi->pdata; + pdata = &dspi->pdata; if (pdata->chip_sel && chip_sel < pdata->num_chipselect && pdata->chip_sel[chip_sel] != SPI_INTERN_CS) @@ -392,7 +394,7 @@ static int davinci_spi_setup(struct spi_device *spi) struct davinci_spi_platform_data *pdata; dspi = spi_master_get_devdata(spi->master); - pdata = dspi->pdata; + pdata = &dspi->pdata; /* if bits per word length is zero then set it default 8 */ if (!spi->bits_per_word) @@ -534,7 +536,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) struct scatterlist sg_rx, sg_tx; dspi = spi_master_get_devdata(spi->master); - pdata = dspi->pdata; + pdata = &dspi->pdata; spicfg = (struct davinci_spi_config *)spi->controller_data; if (!spicfg) spicfg = &davinci_spi_default_cfg; @@ -700,6 +702,19 @@ err_alloc_dummy_buf: } /** + * dummy_thread_fn - dummy thread function + * @irq: IRQ number for this SPI Master + * @context_data: structure for SPI Master controller davinci_spi + * + * This is to satisfy the request_threaded_irq() API so that the irq + * handler is called in interrupt context. + */ +static irqreturn_t dummy_thread_fn(s32 irq, void *data) +{ + return IRQ_HANDLED; +} + +/** * davinci_spi_irq - Interrupt handler for SPI Master Controller * @irq: IRQ number for this SPI Master * @context_data: structure for SPI Master controller davinci_spi @@ -758,6 +773,70 @@ rx_dma_failed: return r; } +#if defined(CONFIG_OF) +static const struct of_device_id davinci_spi_of_match[] = { + { + .compatible = "ti,dm644x-spi", + }, + { + .compatible = "ti,da8xx-spi", + .data = (void *)SPI_VERSION_2, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, davini_spi_of_match); + +/** + * spi_davinci_get_pdata - Get platform data from DTS binding + * @pdev: ptr to platform data + * @dspi: ptr to driver data + * + * Parses and populates pdata in dspi from device tree bindings. + * + * NOTE: Not all platform data params are supported currently. + */ +static int spi_davinci_get_pdata(struct platform_device *pdev, + struct davinci_spi *dspi) +{ + struct device_node *node = pdev->dev.of_node; + struct davinci_spi_platform_data *pdata; + unsigned int num_cs, intr_line = 0; + const struct of_device_id *match; + + pdata = &dspi->pdata; + + pdata->version = SPI_VERSION_1; + match = of_match_device(of_match_ptr(davinci_spi_of_match), + &pdev->dev); + if (!match) + return -ENODEV; + + /* match data has the SPI version number for SPI_VERSION_2 */ + if (match->data == (void *)SPI_VERSION_2) + pdata->version = SPI_VERSION_2; + + /* + * default num_cs is 1 and all chipsel are internal to the chip + * indicated by chip_sel being NULL. GPIO based CS is not + * supported yet in DT bindings. + */ + num_cs = 1; + of_property_read_u32(node, "num-cs", &num_cs); + pdata->num_chipselect = num_cs; + of_property_read_u32(node, "ti,davinci-spi-intr-line", &intr_line); + pdata->intr_line = intr_line; + return 0; +} +#else +#define davinci_spi_of_match NULL +static struct davinci_spi_platform_data + *spi_davinci_get_pdata(struct platform_device *pdev, + struct davinci_spi *dspi) +{ + return -ENODEV; +} +#endif + /** * davinci_spi_probe - probe function for SPI Master Controller * @pdev: platform_device structure which contains plateform specific data @@ -780,12 +859,6 @@ static int davinci_spi_probe(struct platform_device *pdev) int i = 0, ret = 0; u32 spipc0; - pdata = pdev->dev.platform_data; - if (pdata == NULL) { - ret = -ENODEV; - goto err; - } - master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi)); if (master == NULL) { ret = -ENOMEM; @@ -800,6 +873,19 @@ static int davinci_spi_probe(struct platform_device *pdev) goto free_master; } + if (pdev->dev.platform_data) { + pdata = pdev->dev.platform_data; + dspi->pdata = *pdata; + } else { + /* update dspi pdata with that from the DT */ + ret = spi_davinci_get_pdata(pdev, dspi); + if (ret < 0) + goto free_master; + } + + /* pdata in dspi is now updated and point pdata to that */ + pdata = &dspi->pdata; + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (r == NULL) { ret = -ENOENT; @@ -807,7 +893,6 @@ static int davinci_spi_probe(struct platform_device *pdev) } dspi->pbase = r->start; - dspi->pdata = pdata; mem = request_mem_region(r->start, resource_size(r), pdev->name); if (mem == NULL) { @@ -827,8 +912,8 @@ static int davinci_spi_probe(struct platform_device *pdev) goto unmap_io; } - ret = request_irq(dspi->irq, davinci_spi_irq, 0, dev_name(&pdev->dev), - dspi); + ret = request_threaded_irq(dspi->irq, davinci_spi_irq, dummy_thread_fn, + 0, dev_name(&pdev->dev), dspi); if (ret) goto unmap_io; @@ -843,8 +928,9 @@ static int davinci_spi_probe(struct platform_device *pdev) ret = -ENODEV; goto put_master; } - clk_enable(dspi->clk); + clk_prepare_enable(dspi->clk); + master->dev.of_node = pdev->dev.of_node; master->bus_num = pdev->id; master->num_chipselect = pdata->num_chipselect; master->setup = davinci_spi_setup; @@ -927,7 +1013,7 @@ free_dma: dma_release_channel(dspi->dma_rx); dma_release_channel(dspi->dma_tx); free_clk: - clk_disable(dspi->clk); + clk_disable_unprepare(dspi->clk); clk_put(dspi->clk); put_master: spi_master_put(master); @@ -963,7 +1049,7 @@ static int davinci_spi_remove(struct platform_device *pdev) spi_bitbang_stop(&dspi->bitbang); - clk_disable(dspi->clk); + clk_disable_unprepare(dspi->clk); clk_put(dspi->clk); spi_master_put(master); free_irq(dspi->irq, dspi); @@ -978,6 +1064,7 @@ static struct platform_driver davinci_spi_driver = { .driver = { .name = "spi_davinci", .owner = THIS_MODULE, + .of_match_table = davinci_spi_of_match, }, .probe = davinci_spi_probe, .remove = davinci_spi_remove, diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index acb1e1935c5a..d7bac60253c9 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -446,7 +446,7 @@ static inline int bits_per_word(const struct ep93xx_spi *espi) struct spi_message *msg = espi->current_msg; struct spi_transfer *t = msg->state; - return t->bits_per_word ? t->bits_per_word : msg->spi->bits_per_word; + return t->bits_per_word; } static void ep93xx_do_write(struct ep93xx_spi *espi, struct spi_transfer *t) @@ -1085,10 +1085,9 @@ static int ep93xx_spi_probe(struct platform_device *pdev) espi->sspdr_phys = res->start + SSPDR; - espi->regs_base = devm_request_and_ioremap(&pdev->dev, res); - if (!espi->regs_base) { - dev_err(&pdev->dev, "failed to map resources\n"); - error = -ENODEV; + espi->regs_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(espi->regs_base)) { + error = PTR_ERR(espi->regs_base); goto fail_put_clock; } diff --git a/drivers/spi/spi-falcon.c b/drivers/spi/spi-falcon.c index 6a6f62ec2840..c7a74f0ef892 100644 --- a/drivers/spi/spi-falcon.c +++ b/drivers/spi/spi-falcon.c @@ -398,7 +398,7 @@ static int falcon_sflash_xfer_one(struct spi_master *master, } m->status = ret; - m->complete(m->context); + spi_finalize_current_message(master); return 0; } @@ -423,6 +423,7 @@ static int falcon_sflash_probe(struct platform_device *pdev) master->mode_bits = SPI_MODE_3; master->num_chipselect = 1; + master->flags = SPI_MASTER_HALF_DUPLEX; master->bus_num = -1; master->setup = falcon_sflash_setup; master->prepare_transfer_hardware = falcon_sflash_prepare_xfer; diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 1a7f6359d998..086a9eef2e05 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -947,12 +947,12 @@ static int of_fsl_spi_get_chipselects(struct device *dev) struct device_node *np = dev->of_node; struct fsl_spi_platform_data *pdata = dev->platform_data; struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); - unsigned int ngpios; + int ngpios; int i = 0; int ret; ngpios = of_gpio_count(np); - if (!ngpios) { + if (ngpios <= 0) { /* * SPI w/o chip-select line. One SPI device is still permitted * though. diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index c7cf0b7a069b..9ddef55a7165 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -365,9 +365,26 @@ static int spi_gpio_probe_dt(struct platform_device *pdev) if (!pdata) return -ENOMEM; - pdata->sck = of_get_named_gpio(np, "gpio-sck", 0); - pdata->miso = of_get_named_gpio(np, "gpio-miso", 0); - pdata->mosi = of_get_named_gpio(np, "gpio-mosi", 0); + ret = of_get_named_gpio(np, "gpio-sck", 0); + if (ret < 0) { + dev_err(&pdev->dev, "gpio-sck property not found\n"); + goto error_free; + } + pdata->sck = ret; + + ret = of_get_named_gpio(np, "gpio-miso", 0); + if (ret < 0) { + dev_info(&pdev->dev, "gpio-miso property not found, switching to no-rx mode\n"); + pdata->miso = SPI_GPIO_NO_MISO; + } else + pdata->miso = ret; + + ret = of_get_named_gpio(np, "gpio-mosi", 0); + if (ret < 0) { + dev_info(&pdev->dev, "gpio-mosi property not found, switching to no-tx mode\n"); + pdata->mosi = SPI_GPIO_NO_MOSI; + } else + pdata->mosi = ret; ret = of_property_read_u32(np, "num-chipselects", &tmp); if (ret < 0) { diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 904913290aa5..0befeeb522f4 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -949,3 +949,4 @@ module_platform_driver(spi_imx_driver); MODULE_DESCRIPTION("SPI Master Controller driver"); MODULE_AUTHOR("Sascha Hauer, Pengutronix"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c index cb3a3106bd4f..89480b281d74 100644 --- a/drivers/spi/spi-mpc512x-psc.c +++ b/drivers/spi/spi-mpc512x-psc.c @@ -438,6 +438,7 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr, master->num_chipselect = pdata->max_chipselect; } + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; master->setup = mpc512x_psc_spi_setup; master->transfer = mpc512x_psc_spi_transfer; master->cleanup = mpc512x_psc_spi_cleanup; @@ -522,17 +523,11 @@ static int mpc512x_psc_spi_of_probe(struct platform_device *op) regaddr64 = of_translate_address(op->dev.of_node, regaddr_p); /* get PSC id (0..11, used by port_config) */ - if (op->dev.platform_data == NULL) { - const u32 *psc_nump; - - psc_nump = of_get_property(op->dev.of_node, "cell-index", NULL); - if (!psc_nump || *psc_nump > 11) { - dev_err(&op->dev, "mpc512x_psc_spi: Device node %s " - "has invalid cell-index property\n", - op->dev.of_node->full_name); - return -EINVAL; - } - id = *psc_nump; + id = of_alias_get_id(op->dev.of_node, "spi"); + if (id < 0) { + dev_err(&op->dev, "no alias id for %s\n", + op->dev.of_node->full_name); + return id; } return mpc512x_psc_spi_do_probe(&op->dev, (u32) regaddr64, (u32) size64, diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index a3ede249d05d..22a0af0147fb 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -241,6 +241,7 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs, INIT_COMPLETION(spi->c); ctrl0 = readl(ssp->base + HW_SSP_CTRL0); + ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT; ctrl0 |= BM_SSP_CTRL0_DATA_XFER | mxs_spi_cs_to_reg(cs); if (*first) @@ -256,8 +257,10 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs, if ((sg_count + 1 == sgs) && *last) ctrl0 |= BM_SSP_CTRL0_IGNORE_CRC; - if (ssp->devid == IMX23_SSP) + if (ssp->devid == IMX23_SSP) { + ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT; ctrl0 |= min; + } dma_xfer[sg_count].pio[0] = ctrl0; dma_xfer[sg_count].pio[3] = min; @@ -538,9 +541,9 @@ static int mxs_spi_probe(struct platform_device *pdev) if (!iores || irq_err < 0 || irq_dma < 0) return -EINVAL; - base = devm_request_and_ioremap(&pdev->dev, iores); - if (!base) - return -EADDRNOTAVAIL; + base = devm_ioremap_resource(&pdev->dev, iores); + if (IS_ERR(base)) + return PTR_ERR(base); pinctrl = devm_pinctrl_get_select_default(&pdev->dev); if (IS_ERR(pinctrl)) diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c index 432e66ec3088..cb2e284bd814 100644 --- a/drivers/spi/spi-oc-tiny.c +++ b/drivers/spi/spi-oc-tiny.c @@ -54,7 +54,7 @@ struct tiny_spi { unsigned int txc, rxc; const u8 *txp; u8 *rxp; - unsigned int gpio_cs_count; + int gpio_cs_count; int *gpio_cs; }; @@ -74,7 +74,7 @@ static void tiny_spi_chipselect(struct spi_device *spi, int is_active) { struct tiny_spi *hw = tiny_spi_to_hw(spi); - if (hw->gpio_cs_count) { + if (hw->gpio_cs_count > 0) { gpio_set_value(hw->gpio_cs[spi->chip_select], (spi->mode & SPI_CS_HIGH) ? is_active : !is_active); } @@ -254,7 +254,7 @@ static int tiny_spi_of_probe(struct platform_device *pdev) if (!np) return 0; hw->gpio_cs_count = of_gpio_count(np); - if (hw->gpio_cs_count) { + if (hw->gpio_cs_count > 0) { hw->gpio_cs = devm_kzalloc(&pdev->dev, hw->gpio_cs_count * sizeof(unsigned int), GFP_KERNEL); @@ -352,7 +352,7 @@ static int tiny_spi_probe(struct platform_device *pdev) goto exit_gpio; gpio_direction_output(hw->gpio_cs[i], 1); } - hw->bitbang.master->num_chipselect = max(1U, hw->gpio_cs_count); + hw->bitbang.master->num_chipselect = max(1, hw->gpio_cs_count); /* register our spi controller */ err = spi_bitbang_start(&hw->bitbang); diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c index 3aef7fa7d5b8..78d29a18dcc4 100644 --- a/drivers/spi/spi-omap-100k.c +++ b/drivers/spi/spi-omap-100k.c @@ -481,7 +481,7 @@ static int omap1_spi100k_transfer(struct spi_device *spi, struct spi_message *m) return 0; } -static int __init omap1_spi100k_reset(struct omap1_spi100k *spi100k) +static int omap1_spi100k_reset(struct omap1_spi100k *spi100k) { return 0; } @@ -560,7 +560,7 @@ err1: return status; } -static int __exit omap1_spi100k_remove(struct platform_device *pdev) +static int omap1_spi100k_remove(struct platform_device *pdev) { struct spi_master *master; struct omap1_spi100k *spi100k; @@ -604,7 +604,7 @@ static struct platform_driver omap1_spi100k_driver = { .name = "omap1_spi100k", .owner = THIS_MODULE, }, - .remove = __exit_p(omap1_spi100k_remove), + .remove = omap1_spi100k_remove, }; diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 0a94d9dc9c31..102b233b50c4 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -476,7 +476,7 @@ static void uwire_off(struct uwire_spi *uwire) spi_master_put(uwire->bitbang.master); } -static int __init uwire_probe(struct platform_device *pdev) +static int uwire_probe(struct platform_device *pdev) { struct spi_master *master; struct uwire_spi *uwire; @@ -536,7 +536,7 @@ static int __init uwire_probe(struct platform_device *pdev) return status; } -static int __exit uwire_remove(struct platform_device *pdev) +static int uwire_remove(struct platform_device *pdev) { struct uwire_spi *uwire = dev_get_drvdata(&pdev->dev); int status; @@ -557,7 +557,7 @@ static struct platform_driver uwire_driver = { .name = "omap_uwire", .owner = THIS_MODULE, }, - .remove = __exit_p(uwire_remove), + .remove = uwire_remove, // suspend ... unuse ck // resume ... use ck }; diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index b610f522ca44..893c3d78e426 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -298,10 +298,10 @@ static void omap2_mcspi_rx_callback(void *data) struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master); struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi->chip_select]; - complete(&mcspi_dma->dma_rx_completion); - /* We must disable the DMA RX request */ omap2_mcspi_set_dma_req(spi, 1, 0); + + complete(&mcspi_dma->dma_rx_completion); } static void omap2_mcspi_tx_callback(void *data) @@ -310,10 +310,10 @@ static void omap2_mcspi_tx_callback(void *data) struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master); struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi->chip_select]; - complete(&mcspi_dma->dma_tx_completion); - /* We must disable the DMA TX request */ omap2_mcspi_set_dma_req(spi, 0, 0); + + complete(&mcspi_dma->dma_tx_completion); } static void omap2_mcspi_tx_dma(struct spi_device *spi, @@ -927,6 +927,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m) struct spi_device *spi; struct spi_transfer *t = NULL; + struct spi_master *master; int cs_active = 0; struct omap2_mcspi_cs *cs; struct omap2_mcspi_device_config *cd; @@ -935,6 +936,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m) u32 chconf; spi = m->spi; + master = spi->master; cs = spi->controller_state; cd = spi->controller_data; @@ -952,6 +954,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m) if (!t->speed_hz && !t->bits_per_word) par_override = 0; } + if (cd && cd->cs_per_word) { + chconf = mcspi->ctx.modulctrl; + chconf &= ~OMAP2_MCSPI_MODULCTRL_SINGLE; + mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf); + mcspi->ctx.modulctrl = + mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL); + } + if (!cs_active) { omap2_mcspi_force_cs(spi, 1); @@ -1013,6 +1023,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m) if (cs_active) omap2_mcspi_force_cs(spi, 0); + if (cd && cd->cs_per_word) { + chconf = mcspi->ctx.modulctrl; + chconf |= OMAP2_MCSPI_MODULCTRL_SINGLE; + mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf); + mcspi->ctx.modulctrl = + mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL); + } + omap2_mcspi_set_enable(spi, 0); m->status = status; @@ -1020,7 +1038,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m) } static int omap2_mcspi_transfer_one_message(struct spi_master *master, - struct spi_message *m) + struct spi_message *m) { struct omap2_mcspi *mcspi; struct spi_transfer *t; @@ -1041,7 +1059,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, || (len && !(rx_buf || tx_buf)) || (t->bits_per_word && ( t->bits_per_word < 4 - || t->bits_per_word > 32))) { + || t->bits_per_word > 32))) { dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n", t->speed_hz, len, @@ -1052,8 +1070,8 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master, } if (t->speed_hz && t->speed_hz < (OMAP2_MCSPI_MAX_FREQ >> 15)) { dev_dbg(mcspi->dev, "speed_hz %d below minimum %d Hz\n", - t->speed_hz, - OMAP2_MCSPI_MAX_FREQ >> 15); + t->speed_hz, + OMAP2_MCSPI_MAX_FREQ >> 15); return -EINVAL; } @@ -1099,7 +1117,7 @@ static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi) return ret; mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, - OMAP2_MCSPI_WAKEUPENABLE_WKEN); + OMAP2_MCSPI_WAKEUPENABLE_WKEN); ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN; omap2_mcspi_set_master_mode(master); @@ -1204,10 +1222,9 @@ static int omap2_mcspi_probe(struct platform_device *pdev) r->end += regs_offset; mcspi->phys = r->start; - mcspi->base = devm_request_and_ioremap(&pdev->dev, r); - if (!mcspi->base) { - dev_dbg(&pdev->dev, "can't ioremap MCSPI\n"); - status = -ENOMEM; + mcspi->base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(mcspi->base)) { + status = PTR_ERR(mcspi->base); goto free_master; } @@ -1228,7 +1245,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev) sprintf(dma_ch_name, "rx%d", i); dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA, - dma_ch_name); + dma_ch_name); if (!dma_res) { dev_dbg(&pdev->dev, "cannot get DMA RX channel\n"); status = -ENODEV; @@ -1238,7 +1255,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev) mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start; sprintf(dma_ch_name, "tx%d", i); dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA, - dma_ch_name); + dma_ch_name); if (!dma_res) { dev_dbg(&pdev->dev, "cannot get DMA TX channel\n"); status = -ENODEV; @@ -1254,7 +1271,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev) pinctrl = devm_pinctrl_get_select_default(&pdev->dev); if (IS_ERR(pinctrl)) dev_warn(&pdev->dev, - "pins are not configured from the driver\n"); + "pins are not configured from the driver\n"); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index b7e718254b1d..66a5f82cf138 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -366,7 +366,7 @@ msg_done: return 0; } -static int __init orion_spi_reset(struct orion_spi *orion_spi) +static int orion_spi_reset(struct orion_spi *orion_spi) { /* Verify that the CS is deasserted */ orion_spi_set_cs(orion_spi, 0); @@ -396,7 +396,7 @@ static int orion_spi_setup(struct spi_device *spi) return 0; } -static int __init orion_spi_probe(struct platform_device *pdev) +static int orion_spi_probe(struct platform_device *pdev) { struct spi_master *master; struct orion_spi *spi; @@ -479,7 +479,7 @@ out: } -static int __exit orion_spi_remove(struct platform_device *pdev) +static int orion_spi_remove(struct platform_device *pdev) { struct spi_master *master; struct resource *r; @@ -513,20 +513,11 @@ static struct platform_driver orion_spi_driver = { .owner = THIS_MODULE, .of_match_table = of_match_ptr(orion_spi_of_match_table), }, - .remove = __exit_p(orion_spi_remove), + .probe = orion_spi_probe, + .remove = orion_spi_remove, }; -static int __init orion_spi_init(void) -{ - return platform_driver_probe(&orion_spi_driver, orion_spi_probe); -} -module_init(orion_spi_init); - -static void __exit orion_spi_exit(void) -{ - platform_driver_unregister(&orion_spi_driver); -} -module_exit(orion_spi_exit); +module_platform_driver(orion_spi_driver); MODULE_DESCRIPTION("Orion SPI driver"); MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>"); diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c index 7a85f22b6474..357f183a4fb7 100644 --- a/drivers/spi/spi-ppc4xx.c +++ b/drivers/spi/spi-ppc4xx.c @@ -389,7 +389,7 @@ static void free_gpios(struct ppc4xx_spi *hw) /* * platform_device layer stuff... */ -static int __init spi_ppc4xx_of_probe(struct platform_device *op) +static int spi_ppc4xx_of_probe(struct platform_device *op) { struct ppc4xx_spi *hw; struct spi_master *master; @@ -419,7 +419,7 @@ static int __init spi_ppc4xx_of_probe(struct platform_device *op) * This includes both "null" gpio's and real ones. */ num_gpios = of_gpio_count(np); - if (num_gpios) { + if (num_gpios > 0) { int i; hw->gpios = kzalloc(sizeof(int) * num_gpios, GFP_KERNEL); @@ -471,7 +471,7 @@ static int __init spi_ppc4xx_of_probe(struct platform_device *op) SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST; /* this many pins in all GPIO controllers */ - bbp->master->num_chipselect = num_gpios; + bbp->master->num_chipselect = num_gpios > 0 ? num_gpios : 0; /* Get the clock for the OPB */ opbnp = of_find_compatible_node(NULL, NULL, "ibm,opb"); @@ -560,7 +560,7 @@ free_master: return ret; } -static int __exit spi_ppc4xx_of_remove(struct platform_device *op) +static int spi_ppc4xx_of_remove(struct platform_device *op) { struct spi_master *master = dev_get_drvdata(&op->dev); struct ppc4xx_spi *hw = spi_master_get_devdata(master); @@ -583,7 +583,7 @@ MODULE_DEVICE_TABLE(of, spi_ppc4xx_of_match); static struct platform_driver spi_ppc4xx_of_driver = { .probe = spi_ppc4xx_of_probe, - .remove = __exit_p(spi_ppc4xx_of_remove), + .remove = spi_ppc4xx_of_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c new file mode 100644 index 000000000000..c735c5a008a2 --- /dev/null +++ b/drivers/spi/spi-pxa2xx-dma.c @@ -0,0 +1,392 @@ +/* + * PXA2xx SPI DMA engine support. + * + * Copyright (C) 2013, Intel Corporation + * Author: Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/pxa2xx_ssp.h> +#include <linux/scatterlist.h> +#include <linux/sizes.h> +#include <linux/spi/spi.h> +#include <linux/spi/pxa2xx_spi.h> + +#include "spi-pxa2xx.h" + +static int pxa2xx_spi_map_dma_buffer(struct driver_data *drv_data, + enum dma_data_direction dir) +{ + int i, nents, len = drv_data->len; + struct scatterlist *sg; + struct device *dmadev; + struct sg_table *sgt; + void *buf, *pbuf; + + /* + * Some DMA controllers have problems transferring buffers that are + * not multiple of 4 bytes. So we truncate the transfer so that it + * is suitable for such controllers, and handle the trailing bytes + * manually after the DMA completes. + * + * REVISIT: It would be better if this information could be + * retrieved directly from the DMA device in a similar way than + * ->copy_align etc. is done. + */ + len = ALIGN(drv_data->len, 4); + + if (dir == DMA_TO_DEVICE) { + dmadev = drv_data->tx_chan->device->dev; + sgt = &drv_data->tx_sgt; + buf = drv_data->tx; + drv_data->tx_map_len = len; + } else { + dmadev = drv_data->rx_chan->device->dev; + sgt = &drv_data->rx_sgt; + buf = drv_data->rx; + drv_data->rx_map_len = len; + } + + nents = DIV_ROUND_UP(len, SZ_2K); + if (nents != sgt->nents) { + int ret; + + sg_free_table(sgt); + ret = sg_alloc_table(sgt, nents, GFP_KERNEL); + if (ret) + return ret; + } + + pbuf = buf; + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + size_t bytes = min_t(size_t, len, SZ_2K); + + if (buf) + sg_set_buf(sg, pbuf, bytes); + else + sg_set_buf(sg, drv_data->dummy, bytes); + + pbuf += bytes; + len -= bytes; + } + + nents = dma_map_sg(dmadev, sgt->sgl, sgt->nents, dir); + if (!nents) + return -ENOMEM; + + return nents; +} + +static void pxa2xx_spi_unmap_dma_buffer(struct driver_data *drv_data, + enum dma_data_direction dir) +{ + struct device *dmadev; + struct sg_table *sgt; + + if (dir == DMA_TO_DEVICE) { + dmadev = drv_data->tx_chan->device->dev; + sgt = &drv_data->tx_sgt; + } else { + dmadev = drv_data->rx_chan->device->dev; + sgt = &drv_data->rx_sgt; + } + + dma_unmap_sg(dmadev, sgt->sgl, sgt->nents, dir); +} + +static void pxa2xx_spi_unmap_dma_buffers(struct driver_data *drv_data) +{ + if (!drv_data->dma_mapped) + return; + + pxa2xx_spi_unmap_dma_buffer(drv_data, DMA_FROM_DEVICE); + pxa2xx_spi_unmap_dma_buffer(drv_data, DMA_TO_DEVICE); + + drv_data->dma_mapped = 0; +} + +static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data, + bool error) +{ + struct spi_message *msg = drv_data->cur_msg; + + /* + * It is possible that one CPU is handling ROR interrupt and other + * just gets DMA completion. Calling pump_transfers() twice for the + * same transfer leads to problems thus we prevent concurrent calls + * by using ->dma_running. + */ + if (atomic_dec_and_test(&drv_data->dma_running)) { + void __iomem *reg = drv_data->ioaddr; + + /* + * If the other CPU is still handling the ROR interrupt we + * might not know about the error yet. So we re-check the + * ROR bit here before we clear the status register. + */ + if (!error) { + u32 status = read_SSSR(reg) & drv_data->mask_sr; + error = status & SSSR_ROR; + } + + /* Clear status & disable interrupts */ + write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); + write_SSSR_CS(drv_data, drv_data->clear_sr); + if (!pxa25x_ssp_comp(drv_data)) + write_SSTO(0, reg); + + if (!error) { + pxa2xx_spi_unmap_dma_buffers(drv_data); + + /* Handle the last bytes of unaligned transfer */ + drv_data->tx += drv_data->tx_map_len; + drv_data->write(drv_data); + + drv_data->rx += drv_data->rx_map_len; + drv_data->read(drv_data); + + msg->actual_length += drv_data->len; + msg->state = pxa2xx_spi_next_transfer(drv_data); + } else { + /* In case we got an error we disable the SSP now */ + write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); + + msg->state = ERROR_STATE; + } + + tasklet_schedule(&drv_data->pump_transfers); + } +} + +static void pxa2xx_spi_dma_callback(void *data) +{ + pxa2xx_spi_dma_transfer_complete(data, false); +} + +static struct dma_async_tx_descriptor * +pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data, + enum dma_transfer_direction dir) +{ + struct pxa2xx_spi_master *pdata = drv_data->master_info; + struct chip_data *chip = drv_data->cur_chip; + enum dma_slave_buswidth width; + struct dma_slave_config cfg; + struct dma_chan *chan; + struct sg_table *sgt; + int nents, ret; + + switch (drv_data->n_bytes) { + case 1: + width = DMA_SLAVE_BUSWIDTH_1_BYTE; + break; + case 2: + width = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + default: + width = DMA_SLAVE_BUSWIDTH_4_BYTES; + break; + } + + memset(&cfg, 0, sizeof(cfg)); + cfg.direction = dir; + + if (dir == DMA_MEM_TO_DEV) { + cfg.dst_addr = drv_data->ssdr_physical; + cfg.dst_addr_width = width; + cfg.dst_maxburst = chip->dma_burst_size; + cfg.slave_id = pdata->tx_slave_id; + + sgt = &drv_data->tx_sgt; + nents = drv_data->tx_nents; + chan = drv_data->tx_chan; + } else { + cfg.src_addr = drv_data->ssdr_physical; + cfg.src_addr_width = width; + cfg.src_maxburst = chip->dma_burst_size; + cfg.slave_id = pdata->rx_slave_id; + + sgt = &drv_data->rx_sgt; + nents = drv_data->rx_nents; + chan = drv_data->rx_chan; + } + + ret = dmaengine_slave_config(chan, &cfg); + if (ret) { + dev_warn(&drv_data->pdev->dev, "DMA slave config failed\n"); + return NULL; + } + + return dmaengine_prep_slave_sg(chan, sgt->sgl, nents, dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); +} + +static bool pxa2xx_spi_dma_filter(struct dma_chan *chan, void *param) +{ + const struct pxa2xx_spi_master *pdata = param; + + return chan->chan_id == pdata->tx_chan_id || + chan->chan_id == pdata->rx_chan_id; +} + +bool pxa2xx_spi_dma_is_possible(size_t len) +{ + return len <= MAX_DMA_LEN; +} + +int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data) +{ + const struct chip_data *chip = drv_data->cur_chip; + int ret; + + if (!chip->enable_dma) + return 0; + + /* Don't bother with DMA if we can't do even a single burst */ + if (drv_data->len < chip->dma_burst_size) + return 0; + + ret = pxa2xx_spi_map_dma_buffer(drv_data, DMA_TO_DEVICE); + if (ret <= 0) { + dev_warn(&drv_data->pdev->dev, "failed to DMA map TX\n"); + return 0; + } + + drv_data->tx_nents = ret; + + ret = pxa2xx_spi_map_dma_buffer(drv_data, DMA_FROM_DEVICE); + if (ret <= 0) { + pxa2xx_spi_unmap_dma_buffer(drv_data, DMA_TO_DEVICE); + dev_warn(&drv_data->pdev->dev, "failed to DMA map RX\n"); + return 0; + } + + drv_data->rx_nents = ret; + return 1; +} + +irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data) +{ + u32 status; + + status = read_SSSR(drv_data->ioaddr) & drv_data->mask_sr; + if (status & SSSR_ROR) { + dev_err(&drv_data->pdev->dev, "FIFO overrun\n"); + + dmaengine_terminate_all(drv_data->rx_chan); + dmaengine_terminate_all(drv_data->tx_chan); + + pxa2xx_spi_dma_transfer_complete(drv_data, true); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst) +{ + struct dma_async_tx_descriptor *tx_desc, *rx_desc; + + tx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_MEM_TO_DEV); + if (!tx_desc) { + dev_err(&drv_data->pdev->dev, + "failed to get DMA TX descriptor\n"); + return -EBUSY; + } + + rx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_DEV_TO_MEM); + if (!rx_desc) { + dev_err(&drv_data->pdev->dev, + "failed to get DMA RX descriptor\n"); + return -EBUSY; + } + + /* We are ready when RX completes */ + rx_desc->callback = pxa2xx_spi_dma_callback; + rx_desc->callback_param = drv_data; + + dmaengine_submit(rx_desc); + dmaengine_submit(tx_desc); + return 0; +} + +void pxa2xx_spi_dma_start(struct driver_data *drv_data) +{ + dma_async_issue_pending(drv_data->rx_chan); + dma_async_issue_pending(drv_data->tx_chan); + + atomic_set(&drv_data->dma_running, 1); +} + +int pxa2xx_spi_dma_setup(struct driver_data *drv_data) +{ + struct pxa2xx_spi_master *pdata = drv_data->master_info; + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + drv_data->dummy = devm_kzalloc(&drv_data->pdev->dev, SZ_2K, GFP_KERNEL); + if (!drv_data->dummy) + return -ENOMEM; + + drv_data->tx_chan = dma_request_channel(mask, pxa2xx_spi_dma_filter, + pdata); + if (!drv_data->tx_chan) + return -ENODEV; + + drv_data->rx_chan = dma_request_channel(mask, pxa2xx_spi_dma_filter, + pdata); + if (!drv_data->rx_chan) { + dma_release_channel(drv_data->tx_chan); + drv_data->tx_chan = NULL; + return -ENODEV; + } + + return 0; +} + +void pxa2xx_spi_dma_release(struct driver_data *drv_data) +{ + if (drv_data->rx_chan) { + dmaengine_terminate_all(drv_data->rx_chan); + dma_release_channel(drv_data->rx_chan); + sg_free_table(&drv_data->rx_sgt); + drv_data->rx_chan = NULL; + } + if (drv_data->tx_chan) { + dmaengine_terminate_all(drv_data->tx_chan); + dma_release_channel(drv_data->tx_chan); + sg_free_table(&drv_data->tx_sgt); + drv_data->tx_chan = NULL; + } +} + +void pxa2xx_spi_dma_resume(struct driver_data *drv_data) +{ +} + +int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip, + struct spi_device *spi, + u8 bits_per_word, u32 *burst_code, + u32 *threshold) +{ + struct pxa2xx_spi_chip *chip_info = spi->controller_data; + + /* + * If the DMA burst size is given in chip_info we use that, + * otherwise we use the default. Also we use the default FIFO + * thresholds for now. + */ + *burst_code = chip_info ? chip_info->dma_burst_size : 16; + *threshold = SSCR1_RxTresh(RX_THRESH_DFLT) + | SSCR1_TxTresh(TX_THRESH_DFLT); + + return 0; +} diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index cf95587eefde..364964d2ed04 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -8,147 +8,58 @@ #include <linux/module.h> #include <linux/spi/pxa2xx_spi.h> -struct ce4100_info { - struct ssp_device ssp; - struct platform_device *spi_pdev; -}; - -static DEFINE_MUTEX(ssp_lock); -static LIST_HEAD(ssp_list); - -struct ssp_device *pxa_ssp_request(int port, const char *label) -{ - struct ssp_device *ssp = NULL; - - mutex_lock(&ssp_lock); - - list_for_each_entry(ssp, &ssp_list, node) { - if (ssp->port_id == port && ssp->use_count == 0) { - ssp->use_count++; - ssp->label = label; - break; - } - } - - mutex_unlock(&ssp_lock); - - if (&ssp->node == &ssp_list) - return NULL; - - return ssp; -} -EXPORT_SYMBOL_GPL(pxa_ssp_request); - -void pxa_ssp_free(struct ssp_device *ssp) -{ - mutex_lock(&ssp_lock); - if (ssp->use_count) { - ssp->use_count--; - ssp->label = NULL; - } else - dev_err(&ssp->pdev->dev, "device already free\n"); - mutex_unlock(&ssp_lock); -} -EXPORT_SYMBOL_GPL(pxa_ssp_free); - static int ce4100_spi_probe(struct pci_dev *dev, const struct pci_device_id *ent) { + struct platform_device_info pi; int ret; - resource_size_t phys_beg; - resource_size_t phys_len; - struct ce4100_info *spi_info; struct platform_device *pdev; struct pxa2xx_spi_master spi_pdata; struct ssp_device *ssp; - ret = pci_enable_device(dev); + ret = pcim_enable_device(dev); if (ret) return ret; - phys_beg = pci_resource_start(dev, 0); - phys_len = pci_resource_len(dev, 0); - - if (!request_mem_region(phys_beg, phys_len, - "CE4100 SPI")) { - dev_err(&dev->dev, "Can't request register space.\n"); - ret = -EBUSY; + ret = pcim_iomap_regions(dev, 1 << 0, "PXA2xx SPI"); + if (!ret) return ret; - } - pdev = platform_device_alloc("pxa2xx-spi", dev->devfn); - spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL); - if (!pdev || !spi_info ) { - ret = -ENOMEM; - goto err_nomem; - } memset(&spi_pdata, 0, sizeof(spi_pdata)); spi_pdata.num_chipselect = dev->devfn; - ret = platform_device_add_data(pdev, &spi_pdata, sizeof(spi_pdata)); - if (ret) - goto err_nomem; - - pdev->dev.parent = &dev->dev; - pdev->dev.of_node = dev->dev.of_node; - ssp = &spi_info->ssp; + ssp = &spi_pdata.ssp; ssp->phys_base = pci_resource_start(dev, 0); - ssp->mmio_base = ioremap(phys_beg, phys_len); + ssp->mmio_base = pcim_iomap_table(dev)[0]; if (!ssp->mmio_base) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); - ret = -EIO; - goto err_nomem; + dev_err(&dev->dev, "failed to ioremap() registers\n"); + return -EIO; } ssp->irq = dev->irq; - ssp->port_id = pdev->id; + ssp->port_id = dev->devfn; ssp->type = PXA25x_SSP; - mutex_lock(&ssp_lock); - list_add(&ssp->node, &ssp_list); - mutex_unlock(&ssp_lock); + memset(&pi, 0, sizeof(pi)); + pi.parent = &dev->dev; + pi.name = "pxa2xx-spi"; + pi.id = ssp->port_id; + pi.data = &spi_pdata; + pi.size_data = sizeof(spi_pdata); - pci_set_drvdata(dev, spi_info); + pdev = platform_device_register_full(&pi); + if (!pdev) + return -ENOMEM; - ret = platform_device_add(pdev); - if (ret) - goto err_dev_add; + pci_set_drvdata(dev, pdev); - return ret; - -err_dev_add: - pci_set_drvdata(dev, NULL); - mutex_lock(&ssp_lock); - list_del(&ssp->node); - mutex_unlock(&ssp_lock); - iounmap(ssp->mmio_base); - -err_nomem: - release_mem_region(phys_beg, phys_len); - platform_device_put(pdev); - kfree(spi_info); - return ret; + return 0; } static void ce4100_spi_remove(struct pci_dev *dev) { - struct ce4100_info *spi_info; - struct ssp_device *ssp; - - spi_info = pci_get_drvdata(dev); - ssp = &spi_info->ssp; - platform_device_unregister(spi_info->spi_pdev); - - iounmap(ssp->mmio_base); - release_mem_region(pci_resource_start(dev, 0), - pci_resource_len(dev, 0)); - - mutex_lock(&ssp_lock); - list_del(&ssp->node); - mutex_unlock(&ssp_lock); + struct platform_device *pdev = pci_get_drvdata(dev); - pci_set_drvdata(dev, NULL); - pci_disable_device(dev); - kfree(spi_info); + platform_device_unregister(pdev); } static DEFINE_PCI_DEVICE_TABLE(ce4100_spi_devices) = { diff --git a/drivers/spi/spi-pxa2xx-pxadma.c b/drivers/spi/spi-pxa2xx-pxadma.c new file mode 100644 index 000000000000..2916efc7cfe5 --- /dev/null +++ b/drivers/spi/spi-pxa2xx-pxadma.c @@ -0,0 +1,490 @@ +/* + * PXA2xx SPI private DMA support. + * + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/pxa2xx_ssp.h> +#include <linux/spi/spi.h> +#include <linux/spi/pxa2xx_spi.h> + +#include "spi-pxa2xx.h" + +#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) +#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) + +bool pxa2xx_spi_dma_is_possible(size_t len) +{ + /* Try to map dma buffer and do a dma transfer if successful, but + * only if the length is non-zero and less than MAX_DMA_LEN. + * + * Zero-length non-descriptor DMA is illegal on PXA2xx; force use + * of PIO instead. Care is needed above because the transfer may + * have have been passed with buffers that are already dma mapped. + * A zero-length transfer in PIO mode will not try to write/read + * to/from the buffers + * + * REVISIT large transfers are exactly where we most want to be + * using DMA. If this happens much, split those transfers into + * multiple DMA segments rather than forcing PIO. + */ + return len > 0 && len <= MAX_DMA_LEN; +} + +int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data) +{ + struct spi_message *msg = drv_data->cur_msg; + struct device *dev = &msg->spi->dev; + + if (!drv_data->cur_chip->enable_dma) + return 0; + + if (msg->is_dma_mapped) + return drv_data->rx_dma && drv_data->tx_dma; + + if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx)) + return 0; + + /* Modify setup if rx buffer is null */ + if (drv_data->rx == NULL) { + *drv_data->null_dma_buf = 0; + drv_data->rx = drv_data->null_dma_buf; + drv_data->rx_map_len = 4; + } else + drv_data->rx_map_len = drv_data->len; + + + /* Modify setup if tx buffer is null */ + if (drv_data->tx == NULL) { + *drv_data->null_dma_buf = 0; + drv_data->tx = drv_data->null_dma_buf; + drv_data->tx_map_len = 4; + } else + drv_data->tx_map_len = drv_data->len; + + /* Stream map the tx buffer. Always do DMA_TO_DEVICE first + * so we flush the cache *before* invalidating it, in case + * the tx and rx buffers overlap. + */ + drv_data->tx_dma = dma_map_single(dev, drv_data->tx, + drv_data->tx_map_len, DMA_TO_DEVICE); + if (dma_mapping_error(dev, drv_data->tx_dma)) + return 0; + + /* Stream map the rx buffer */ + drv_data->rx_dma = dma_map_single(dev, drv_data->rx, + drv_data->rx_map_len, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, drv_data->rx_dma)) { + dma_unmap_single(dev, drv_data->tx_dma, + drv_data->tx_map_len, DMA_TO_DEVICE); + return 0; + } + + return 1; +} + +static void pxa2xx_spi_unmap_dma_buffers(struct driver_data *drv_data) +{ + struct device *dev; + + if (!drv_data->dma_mapped) + return; + + if (!drv_data->cur_msg->is_dma_mapped) { + dev = &drv_data->cur_msg->spi->dev; + dma_unmap_single(dev, drv_data->rx_dma, + drv_data->rx_map_len, DMA_FROM_DEVICE); + dma_unmap_single(dev, drv_data->tx_dma, + drv_data->tx_map_len, DMA_TO_DEVICE); + } + + drv_data->dma_mapped = 0; +} + +static int wait_ssp_rx_stall(void const __iomem *ioaddr) +{ + unsigned long limit = loops_per_jiffy << 1; + + while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit) + cpu_relax(); + + return limit; +} + +static int wait_dma_channel_stop(int channel) +{ + unsigned long limit = loops_per_jiffy << 1; + + while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit) + cpu_relax(); + + return limit; +} + +static void pxa2xx_spi_dma_error_stop(struct driver_data *drv_data, + const char *msg) +{ + void __iomem *reg = drv_data->ioaddr; + + /* Stop and reset */ + DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; + DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; + write_SSSR_CS(drv_data, drv_data->clear_sr); + write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); + if (!pxa25x_ssp_comp(drv_data)) + write_SSTO(0, reg); + pxa2xx_spi_flush(drv_data); + write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); + + pxa2xx_spi_unmap_dma_buffers(drv_data); + + dev_err(&drv_data->pdev->dev, "%s\n", msg); + + drv_data->cur_msg->state = ERROR_STATE; + tasklet_schedule(&drv_data->pump_transfers); +} + +static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + struct spi_message *msg = drv_data->cur_msg; + + /* Clear and disable interrupts on SSP and DMA channels*/ + write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); + write_SSSR_CS(drv_data, drv_data->clear_sr); + DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; + DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; + + if (wait_dma_channel_stop(drv_data->rx_channel) == 0) + dev_err(&drv_data->pdev->dev, + "dma_handler: dma rx channel stop failed\n"); + + if (wait_ssp_rx_stall(drv_data->ioaddr) == 0) + dev_err(&drv_data->pdev->dev, + "dma_transfer: ssp rx stall failed\n"); + + pxa2xx_spi_unmap_dma_buffers(drv_data); + + /* update the buffer pointer for the amount completed in dma */ + drv_data->rx += drv_data->len - + (DCMD(drv_data->rx_channel) & DCMD_LENGTH); + + /* read trailing data from fifo, it does not matter how many + * bytes are in the fifo just read until buffer is full + * or fifo is empty, which ever occurs first */ + drv_data->read(drv_data); + + /* return count of what was actually read */ + msg->actual_length += drv_data->len - + (drv_data->rx_end - drv_data->rx); + + /* Transfer delays and chip select release are + * handled in pump_transfers or giveback + */ + + /* Move to next transfer */ + msg->state = pxa2xx_spi_next_transfer(drv_data); + + /* Schedule transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); +} + +void pxa2xx_spi_dma_handler(int channel, void *data) +{ + struct driver_data *drv_data = data; + u32 irq_status = DCSR(channel) & DMA_INT_MASK; + + if (irq_status & DCSR_BUSERR) { + + if (channel == drv_data->tx_channel) + pxa2xx_spi_dma_error_stop(drv_data, + "dma_handler: bad bus address on tx channel"); + else + pxa2xx_spi_dma_error_stop(drv_data, + "dma_handler: bad bus address on rx channel"); + return; + } + + /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */ + if ((channel == drv_data->tx_channel) + && (irq_status & DCSR_ENDINTR) + && (drv_data->ssp_type == PXA25x_SSP)) { + + /* Wait for rx to stall */ + if (wait_ssp_rx_stall(drv_data->ioaddr) == 0) + dev_err(&drv_data->pdev->dev, + "dma_handler: ssp rx stall failed\n"); + + /* finish this transfer, start the next */ + pxa2xx_spi_dma_transfer_complete(drv_data); + } +} + +irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data) +{ + u32 irq_status; + void __iomem *reg = drv_data->ioaddr; + + irq_status = read_SSSR(reg) & drv_data->mask_sr; + if (irq_status & SSSR_ROR) { + pxa2xx_spi_dma_error_stop(drv_data, + "dma_transfer: fifo overrun"); + return IRQ_HANDLED; + } + + /* Check for false positive timeout */ + if ((irq_status & SSSR_TINT) + && (DCSR(drv_data->tx_channel) & DCSR_RUN)) { + write_SSSR(SSSR_TINT, reg); + return IRQ_HANDLED; + } + + if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) { + + /* Clear and disable timeout interrupt, do the rest in + * dma_transfer_complete */ + if (!pxa25x_ssp_comp(drv_data)) + write_SSTO(0, reg); + + /* finish this transfer, start the next */ + pxa2xx_spi_dma_transfer_complete(drv_data); + + return IRQ_HANDLED; + } + + /* Opps problem detected */ + return IRQ_NONE; +} + +int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst) +{ + u32 dma_width; + + switch (drv_data->n_bytes) { + case 1: + dma_width = DCMD_WIDTH1; + break; + case 2: + dma_width = DCMD_WIDTH2; + break; + default: + dma_width = DCMD_WIDTH4; + break; + } + + /* Setup rx DMA Channel */ + DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; + DSADR(drv_data->rx_channel) = drv_data->ssdr_physical; + DTADR(drv_data->rx_channel) = drv_data->rx_dma; + if (drv_data->rx == drv_data->null_dma_buf) + /* No target address increment */ + DCMD(drv_data->rx_channel) = DCMD_FLOWSRC + | dma_width + | dma_burst + | drv_data->len; + else + DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR + | DCMD_FLOWSRC + | dma_width + | dma_burst + | drv_data->len; + + /* Setup tx DMA Channel */ + DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; + DSADR(drv_data->tx_channel) = drv_data->tx_dma; + DTADR(drv_data->tx_channel) = drv_data->ssdr_physical; + if (drv_data->tx == drv_data->null_dma_buf) + /* No source address increment */ + DCMD(drv_data->tx_channel) = DCMD_FLOWTRG + | dma_width + | dma_burst + | drv_data->len; + else + DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR + | DCMD_FLOWTRG + | dma_width + | dma_burst + | drv_data->len; + + /* Enable dma end irqs on SSP to detect end of transfer */ + if (drv_data->ssp_type == PXA25x_SSP) + DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN; + + return 0; +} + +void pxa2xx_spi_dma_start(struct driver_data *drv_data) +{ + DCSR(drv_data->rx_channel) |= DCSR_RUN; + DCSR(drv_data->tx_channel) |= DCSR_RUN; +} + +int pxa2xx_spi_dma_setup(struct driver_data *drv_data) +{ + struct device *dev = &drv_data->pdev->dev; + struct ssp_device *ssp = drv_data->ssp; + + /* Get two DMA channels (rx and tx) */ + drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx", + DMA_PRIO_HIGH, + pxa2xx_spi_dma_handler, + drv_data); + if (drv_data->rx_channel < 0) { + dev_err(dev, "problem (%d) requesting rx channel\n", + drv_data->rx_channel); + return -ENODEV; + } + drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx", + DMA_PRIO_MEDIUM, + pxa2xx_spi_dma_handler, + drv_data); + if (drv_data->tx_channel < 0) { + dev_err(dev, "problem (%d) requesting tx channel\n", + drv_data->tx_channel); + pxa_free_dma(drv_data->rx_channel); + return -ENODEV; + } + + DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel; + DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel; + + return 0; +} + +void pxa2xx_spi_dma_release(struct driver_data *drv_data) +{ + struct ssp_device *ssp = drv_data->ssp; + + DRCMR(ssp->drcmr_rx) = 0; + DRCMR(ssp->drcmr_tx) = 0; + + if (drv_data->tx_channel != 0) + pxa_free_dma(drv_data->tx_channel); + if (drv_data->rx_channel != 0) + pxa_free_dma(drv_data->rx_channel); +} + +void pxa2xx_spi_dma_resume(struct driver_data *drv_data) +{ + if (drv_data->rx_channel != -1) + DRCMR(drv_data->ssp->drcmr_rx) = + DRCMR_MAPVLD | drv_data->rx_channel; + if (drv_data->tx_channel != -1) + DRCMR(drv_data->ssp->drcmr_tx) = + DRCMR_MAPVLD | drv_data->tx_channel; +} + +int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip, + struct spi_device *spi, + u8 bits_per_word, u32 *burst_code, + u32 *threshold) +{ + struct pxa2xx_spi_chip *chip_info = + (struct pxa2xx_spi_chip *)spi->controller_data; + int bytes_per_word; + int burst_bytes; + int thresh_words; + int req_burst_size; + int retval = 0; + + /* Set the threshold (in registers) to equal the same amount of data + * as represented by burst size (in bytes). The computation below + * is (burst_size rounded up to nearest 8 byte, word or long word) + * divided by (bytes/register); the tx threshold is the inverse of + * the rx, so that there will always be enough data in the rx fifo + * to satisfy a burst, and there will always be enough space in the + * tx fifo to accept a burst (a tx burst will overwrite the fifo if + * there is not enough space), there must always remain enough empty + * space in the rx fifo for any data loaded to the tx fifo. + * Whenever burst_size (in bytes) equals bits/word, the fifo threshold + * will be 8, or half the fifo; + * The threshold can only be set to 2, 4 or 8, but not 16, because + * to burst 16 to the tx fifo, the fifo would have to be empty; + * however, the minimum fifo trigger level is 1, and the tx will + * request service when the fifo is at this level, with only 15 spaces. + */ + + /* find bytes/word */ + if (bits_per_word <= 8) + bytes_per_word = 1; + else if (bits_per_word <= 16) + bytes_per_word = 2; + else + bytes_per_word = 4; + + /* use struct pxa2xx_spi_chip->dma_burst_size if available */ + if (chip_info) + req_burst_size = chip_info->dma_burst_size; + else { + switch (chip->dma_burst_size) { + default: + /* if the default burst size is not set, + * do it now */ + chip->dma_burst_size = DCMD_BURST8; + case DCMD_BURST8: + req_burst_size = 8; + break; + case DCMD_BURST16: + req_burst_size = 16; + break; + case DCMD_BURST32: + req_burst_size = 32; + break; + } + } + if (req_burst_size <= 8) { + *burst_code = DCMD_BURST8; + burst_bytes = 8; + } else if (req_burst_size <= 16) { + if (bytes_per_word == 1) { + /* don't burst more than 1/2 the fifo */ + *burst_code = DCMD_BURST8; + burst_bytes = 8; + retval = 1; + } else { + *burst_code = DCMD_BURST16; + burst_bytes = 16; + } + } else { + if (bytes_per_word == 1) { + /* don't burst more than 1/2 the fifo */ + *burst_code = DCMD_BURST8; + burst_bytes = 8; + retval = 1; + } else if (bytes_per_word == 2) { + /* don't burst more than 1/2 the fifo */ + *burst_code = DCMD_BURST16; + burst_bytes = 16; + retval = 1; + } else { + *burst_code = DCMD_BURST32; + burst_bytes = 32; + } + } + + thresh_words = burst_bytes / bytes_per_word; + + /* thresh_words will be between 2 and 8 */ + *threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT) + | (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT); + + return retval; +} diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 5c8c4f5883c4..90b27a3508a6 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1,5 +1,6 @@ /* * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * Copyright (C) 2013, Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,17 +25,20 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/spi/pxa2xx_spi.h> -#include <linux/dma-mapping.h> #include <linux/spi/spi.h> #include <linux/workqueue.h> #include <linux/delay.h> #include <linux/gpio.h> #include <linux/slab.h> +#include <linux/clk.h> +#include <linux/pm_runtime.h> +#include <linux/acpi.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/delay.h> +#include "spi-pxa2xx.h" MODULE_AUTHOR("Stephen Street"); MODULE_DESCRIPTION("PXA2xx SSP SPI Controller"); @@ -45,12 +49,6 @@ MODULE_ALIAS("platform:pxa2xx-spi"); #define TIMOUT_DFLT 1000 -#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) -#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) -#define IS_DMA_ALIGNED(x) ((((u32)(x)) & 0x07) == 0) -#define MAX_DMA_LEN 8191 -#define DMA_ALIGNMENT 8 - /* * for testing SSCR1 changes that require SSP restart, basically * everything except the service and interrupt enables, the pxa270 developer @@ -65,115 +63,97 @@ MODULE_ALIAS("platform:pxa2xx-spi"); | SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \ | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) -#define DEFINE_SSP_REG(reg, off) \ -static inline u32 read_##reg(void const __iomem *p) \ -{ return __raw_readl(p + (off)); } \ -\ -static inline void write_##reg(u32 v, void __iomem *p) \ -{ __raw_writel(v, p + (off)); } - -DEFINE_SSP_REG(SSCR0, 0x00) -DEFINE_SSP_REG(SSCR1, 0x04) -DEFINE_SSP_REG(SSSR, 0x08) -DEFINE_SSP_REG(SSITR, 0x0c) -DEFINE_SSP_REG(SSDR, 0x10) -DEFINE_SSP_REG(SSTO, 0x28) -DEFINE_SSP_REG(SSPSP, 0x2c) - -#define START_STATE ((void*)0) -#define RUNNING_STATE ((void*)1) -#define DONE_STATE ((void*)2) -#define ERROR_STATE ((void*)-1) - -#define QUEUE_RUNNING 0 -#define QUEUE_STOPPED 1 - -struct driver_data { - /* Driver model hookup */ - struct platform_device *pdev; - - /* SSP Info */ - struct ssp_device *ssp; +#define LPSS_RX_THRESH_DFLT 64 +#define LPSS_TX_LOTHRESH_DFLT 160 +#define LPSS_TX_HITHRESH_DFLT 224 - /* SPI framework hookup */ - enum pxa_ssp_type ssp_type; - struct spi_master *master; +/* Offset from drv_data->lpss_base */ +#define SPI_CS_CONTROL 0x18 +#define SPI_CS_CONTROL_SW_MODE BIT(0) +#define SPI_CS_CONTROL_CS_HIGH BIT(1) - /* PXA hookup */ - struct pxa2xx_spi_master *master_info; - - /* DMA setup stuff */ - int rx_channel; - int tx_channel; - u32 *null_dma_buf; - - /* SSP register addresses */ - void __iomem *ioaddr; - u32 ssdr_physical; - - /* SSP masks*/ - u32 dma_cr1; - u32 int_cr1; - u32 clear_sr; - u32 mask_sr; - - /* Driver message queue */ - struct workqueue_struct *workqueue; - struct work_struct pump_messages; - spinlock_t lock; - struct list_head queue; - int busy; - int run; - - /* Message Transfer pump */ - struct tasklet_struct pump_transfers; - - /* Current message transfer state info */ - struct spi_message* cur_msg; - struct spi_transfer* cur_transfer; - struct chip_data *cur_chip; - size_t len; - void *tx; - void *tx_end; - void *rx; - void *rx_end; - int dma_mapped; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - size_t rx_map_len; - size_t tx_map_len; - u8 n_bytes; - u32 dma_width; - int (*write)(struct driver_data *drv_data); - int (*read)(struct driver_data *drv_data); - irqreturn_t (*transfer_handler)(struct driver_data *drv_data); - void (*cs_control)(u32 command); -}; +static bool is_lpss_ssp(const struct driver_data *drv_data) +{ + return drv_data->ssp_type == LPSS_SSP; +} -struct chip_data { - u32 cr0; - u32 cr1; - u32 psp; - u32 timeout; - u8 n_bytes; - u32 dma_width; - u32 dma_burst_size; - u32 threshold; - u32 dma_threshold; - u8 enable_dma; - u8 bits_per_word; - u32 speed_hz; - union { - int gpio_cs; - unsigned int frm; - }; - int gpio_cs_inverted; - int (*write)(struct driver_data *drv_data); - int (*read)(struct driver_data *drv_data); - void (*cs_control)(u32 command); -}; +/* + * Read and write LPSS SSP private registers. Caller must first check that + * is_lpss_ssp() returns true before these can be called. + */ +static u32 __lpss_ssp_read_priv(struct driver_data *drv_data, unsigned offset) +{ + WARN_ON(!drv_data->lpss_base); + return readl(drv_data->lpss_base + offset); +} -static void pump_messages(struct work_struct *work); +static void __lpss_ssp_write_priv(struct driver_data *drv_data, + unsigned offset, u32 value) +{ + WARN_ON(!drv_data->lpss_base); + writel(value, drv_data->lpss_base + offset); +} + +/* + * lpss_ssp_setup - perform LPSS SSP specific setup + * @drv_data: pointer to the driver private data + * + * Perform LPSS SSP specific setup. This function must be called first if + * one is going to use LPSS SSP private registers. + */ +static void lpss_ssp_setup(struct driver_data *drv_data) +{ + unsigned offset = 0x400; + u32 value, orig; + + if (!is_lpss_ssp(drv_data)) + return; + + /* + * Perform auto-detection of the LPSS SSP private registers. They + * can be either at 1k or 2k offset from the base address. + */ + orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL); + + value = orig | SPI_CS_CONTROL_SW_MODE; + writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL); + value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL); + if (value != (orig | SPI_CS_CONTROL_SW_MODE)) { + offset = 0x800; + goto detection_done; + } + + value &= ~SPI_CS_CONTROL_SW_MODE; + writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL); + value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL); + if (value != orig) { + offset = 0x800; + goto detection_done; + } + +detection_done: + /* Now set the LPSS base */ + drv_data->lpss_base = drv_data->ioaddr + offset; + + /* Enable software chip select control */ + value = SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH; + __lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value); +} + +static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable) +{ + u32 value; + + if (!is_lpss_ssp(drv_data)) + return; + + value = __lpss_ssp_read_priv(drv_data, SPI_CS_CONTROL); + if (enable) + value &= ~SPI_CS_CONTROL_CS_HIGH; + else + value |= SPI_CS_CONTROL_CS_HIGH; + __lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value); +} static void cs_assert(struct driver_data *drv_data) { @@ -189,8 +169,12 @@ static void cs_assert(struct driver_data *drv_data) return; } - if (gpio_is_valid(chip->gpio_cs)) + if (gpio_is_valid(chip->gpio_cs)) { gpio_set_value(chip->gpio_cs, chip->gpio_cs_inverted); + return; + } + + lpss_ssp_cs_control(drv_data, true); } static void cs_deassert(struct driver_data *drv_data) @@ -205,30 +189,15 @@ static void cs_deassert(struct driver_data *drv_data) return; } - if (gpio_is_valid(chip->gpio_cs)) + if (gpio_is_valid(chip->gpio_cs)) { gpio_set_value(chip->gpio_cs, !chip->gpio_cs_inverted); -} - -static void write_SSSR_CS(struct driver_data *drv_data, u32 val) -{ - void __iomem *reg = drv_data->ioaddr; - - if (drv_data->ssp_type == CE4100_SSP) - val |= read_SSSR(reg) & SSSR_ALT_FRM_MASK; - - write_SSSR(val, reg); -} + return; + } -static int pxa25x_ssp_comp(struct driver_data *drv_data) -{ - if (drv_data->ssp_type == PXA25x_SSP) - return 1; - if (drv_data->ssp_type == CE4100_SSP) - return 1; - return 0; + lpss_ssp_cs_control(drv_data, false); } -static int flush(struct driver_data *drv_data) +int pxa2xx_spi_flush(struct driver_data *drv_data) { unsigned long limit = loops_per_jiffy << 1; @@ -354,7 +323,7 @@ static int u32_reader(struct driver_data *drv_data) return drv_data->rx == drv_data->rx_end; } -static void *next_transfer(struct driver_data *drv_data) +void *pxa2xx_spi_next_transfer(struct driver_data *drv_data) { struct spi_message *msg = drv_data->cur_msg; struct spi_transfer *trans = drv_data->cur_transfer; @@ -370,89 +339,15 @@ static void *next_transfer(struct driver_data *drv_data) return DONE_STATE; } -static int map_dma_buffers(struct driver_data *drv_data) -{ - struct spi_message *msg = drv_data->cur_msg; - struct device *dev = &msg->spi->dev; - - if (!drv_data->cur_chip->enable_dma) - return 0; - - if (msg->is_dma_mapped) - return drv_data->rx_dma && drv_data->tx_dma; - - if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx)) - return 0; - - /* Modify setup if rx buffer is null */ - if (drv_data->rx == NULL) { - *drv_data->null_dma_buf = 0; - drv_data->rx = drv_data->null_dma_buf; - drv_data->rx_map_len = 4; - } else - drv_data->rx_map_len = drv_data->len; - - - /* Modify setup if tx buffer is null */ - if (drv_data->tx == NULL) { - *drv_data->null_dma_buf = 0; - drv_data->tx = drv_data->null_dma_buf; - drv_data->tx_map_len = 4; - } else - drv_data->tx_map_len = drv_data->len; - - /* Stream map the tx buffer. Always do DMA_TO_DEVICE first - * so we flush the cache *before* invalidating it, in case - * the tx and rx buffers overlap. - */ - drv_data->tx_dma = dma_map_single(dev, drv_data->tx, - drv_data->tx_map_len, DMA_TO_DEVICE); - if (dma_mapping_error(dev, drv_data->tx_dma)) - return 0; - - /* Stream map the rx buffer */ - drv_data->rx_dma = dma_map_single(dev, drv_data->rx, - drv_data->rx_map_len, DMA_FROM_DEVICE); - if (dma_mapping_error(dev, drv_data->rx_dma)) { - dma_unmap_single(dev, drv_data->tx_dma, - drv_data->tx_map_len, DMA_TO_DEVICE); - return 0; - } - - return 1; -} - -static void unmap_dma_buffers(struct driver_data *drv_data) -{ - struct device *dev; - - if (!drv_data->dma_mapped) - return; - - if (!drv_data->cur_msg->is_dma_mapped) { - dev = &drv_data->cur_msg->spi->dev; - dma_unmap_single(dev, drv_data->rx_dma, - drv_data->rx_map_len, DMA_FROM_DEVICE); - dma_unmap_single(dev, drv_data->tx_dma, - drv_data->tx_map_len, DMA_TO_DEVICE); - } - - drv_data->dma_mapped = 0; -} - /* caller already set message->status; dma and pio irqs are blocked */ static void giveback(struct driver_data *drv_data) { struct spi_transfer* last_transfer; - unsigned long flags; struct spi_message *msg; - spin_lock_irqsave(&drv_data->lock, flags); msg = drv_data->cur_msg; drv_data->cur_msg = NULL; drv_data->cur_transfer = NULL; - queue_work(drv_data->workqueue, &drv_data->pump_messages); - spin_unlock_irqrestore(&drv_data->lock, flags); last_transfer = list_entry(msg->transfers.prev, struct spi_transfer, @@ -481,13 +376,7 @@ static void giveback(struct driver_data *drv_data) */ /* get a pointer to the next message, if any */ - spin_lock_irqsave(&drv_data->lock, flags); - if (list_empty(&drv_data->queue)) - next_msg = NULL; - else - next_msg = list_entry(drv_data->queue.next, - struct spi_message, queue); - spin_unlock_irqrestore(&drv_data->lock, flags); + next_msg = spi_get_next_queued_message(drv_data->master); /* see if the next and current messages point * to the same chip @@ -498,168 +387,10 @@ static void giveback(struct driver_data *drv_data) cs_deassert(drv_data); } - msg->state = NULL; - if (msg->complete) - msg->complete(msg->context); - + spi_finalize_current_message(drv_data->master); drv_data->cur_chip = NULL; } -static int wait_ssp_rx_stall(void const __iomem *ioaddr) -{ - unsigned long limit = loops_per_jiffy << 1; - - while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit) - cpu_relax(); - - return limit; -} - -static int wait_dma_channel_stop(int channel) -{ - unsigned long limit = loops_per_jiffy << 1; - - while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit) - cpu_relax(); - - return limit; -} - -static void dma_error_stop(struct driver_data *drv_data, const char *msg) -{ - void __iomem *reg = drv_data->ioaddr; - - /* Stop and reset */ - DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; - DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; - write_SSSR_CS(drv_data, drv_data->clear_sr); - write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); - if (!pxa25x_ssp_comp(drv_data)) - write_SSTO(0, reg); - flush(drv_data); - write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); - - unmap_dma_buffers(drv_data); - - dev_err(&drv_data->pdev->dev, "%s\n", msg); - - drv_data->cur_msg->state = ERROR_STATE; - tasklet_schedule(&drv_data->pump_transfers); -} - -static void dma_transfer_complete(struct driver_data *drv_data) -{ - void __iomem *reg = drv_data->ioaddr; - struct spi_message *msg = drv_data->cur_msg; - - /* Clear and disable interrupts on SSP and DMA channels*/ - write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); - write_SSSR_CS(drv_data, drv_data->clear_sr); - DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; - DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; - - if (wait_dma_channel_stop(drv_data->rx_channel) == 0) - dev_err(&drv_data->pdev->dev, - "dma_handler: dma rx channel stop failed\n"); - - if (wait_ssp_rx_stall(drv_data->ioaddr) == 0) - dev_err(&drv_data->pdev->dev, - "dma_transfer: ssp rx stall failed\n"); - - unmap_dma_buffers(drv_data); - - /* update the buffer pointer for the amount completed in dma */ - drv_data->rx += drv_data->len - - (DCMD(drv_data->rx_channel) & DCMD_LENGTH); - - /* read trailing data from fifo, it does not matter how many - * bytes are in the fifo just read until buffer is full - * or fifo is empty, which ever occurs first */ - drv_data->read(drv_data); - - /* return count of what was actually read */ - msg->actual_length += drv_data->len - - (drv_data->rx_end - drv_data->rx); - - /* Transfer delays and chip select release are - * handled in pump_transfers or giveback - */ - - /* Move to next transfer */ - msg->state = next_transfer(drv_data); - - /* Schedule transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); -} - -static void dma_handler(int channel, void *data) -{ - struct driver_data *drv_data = data; - u32 irq_status = DCSR(channel) & DMA_INT_MASK; - - if (irq_status & DCSR_BUSERR) { - - if (channel == drv_data->tx_channel) - dma_error_stop(drv_data, - "dma_handler: " - "bad bus address on tx channel"); - else - dma_error_stop(drv_data, - "dma_handler: " - "bad bus address on rx channel"); - return; - } - - /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */ - if ((channel == drv_data->tx_channel) - && (irq_status & DCSR_ENDINTR) - && (drv_data->ssp_type == PXA25x_SSP)) { - - /* Wait for rx to stall */ - if (wait_ssp_rx_stall(drv_data->ioaddr) == 0) - dev_err(&drv_data->pdev->dev, - "dma_handler: ssp rx stall failed\n"); - - /* finish this transfer, start the next */ - dma_transfer_complete(drv_data); - } -} - -static irqreturn_t dma_transfer(struct driver_data *drv_data) -{ - u32 irq_status; - void __iomem *reg = drv_data->ioaddr; - - irq_status = read_SSSR(reg) & drv_data->mask_sr; - if (irq_status & SSSR_ROR) { - dma_error_stop(drv_data, "dma_transfer: fifo overrun"); - return IRQ_HANDLED; - } - - /* Check for false positive timeout */ - if ((irq_status & SSSR_TINT) - && (DCSR(drv_data->tx_channel) & DCSR_RUN)) { - write_SSSR(SSSR_TINT, reg); - return IRQ_HANDLED; - } - - if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) { - - /* Clear and disable timeout interrupt, do the rest in - * dma_transfer_complete */ - if (!pxa25x_ssp_comp(drv_data)) - write_SSTO(0, reg); - - /* finish this transfer, start the next */ - dma_transfer_complete(drv_data); - - return IRQ_HANDLED; - } - - /* Opps problem detected */ - return IRQ_NONE; -} - static void reset_sccr1(struct driver_data *drv_data) { void __iomem *reg = drv_data->ioaddr; @@ -681,7 +412,7 @@ static void int_error_stop(struct driver_data *drv_data, const char* msg) reset_sccr1(drv_data); if (!pxa25x_ssp_comp(drv_data)) write_SSTO(0, reg); - flush(drv_data); + pxa2xx_spi_flush(drv_data); write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); dev_err(&drv_data->pdev->dev, "%s\n", msg); @@ -709,7 +440,7 @@ static void int_transfer_complete(struct driver_data *drv_data) */ /* Move to next transfer */ - drv_data->cur_msg->state = next_transfer(drv_data); + drv_data->cur_msg->state = pxa2xx_spi_next_transfer(drv_data); /* Schedule transfer tasklet */ tasklet_schedule(&drv_data->pump_transfers); @@ -789,10 +520,20 @@ static irqreturn_t ssp_int(int irq, void *dev_id) { struct driver_data *drv_data = dev_id; void __iomem *reg = drv_data->ioaddr; - u32 sccr1_reg = read_SSCR1(reg); + u32 sccr1_reg; u32 mask = drv_data->mask_sr; u32 status; + /* + * The IRQ might be shared with other peripherals so we must first + * check that are we RPM suspended or not. If we are we assume that + * the IRQ was not for us (we shouldn't be RPM suspended when the + * interrupt is enabled). + */ + if (pm_runtime_suspended(&drv_data->pdev->dev)) + return IRQ_NONE; + + sccr1_reg = read_SSCR1(reg); status = read_SSSR(reg); /* Ignore possible writes if we don't need to write */ @@ -820,106 +561,12 @@ static irqreturn_t ssp_int(int irq, void *dev_id) return drv_data->transfer_handler(drv_data); } -static int set_dma_burst_and_threshold(struct chip_data *chip, - struct spi_device *spi, - u8 bits_per_word, u32 *burst_code, - u32 *threshold) +static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) { - struct pxa2xx_spi_chip *chip_info = - (struct pxa2xx_spi_chip *)spi->controller_data; - int bytes_per_word; - int burst_bytes; - int thresh_words; - int req_burst_size; - int retval = 0; - - /* Set the threshold (in registers) to equal the same amount of data - * as represented by burst size (in bytes). The computation below - * is (burst_size rounded up to nearest 8 byte, word or long word) - * divided by (bytes/register); the tx threshold is the inverse of - * the rx, so that there will always be enough data in the rx fifo - * to satisfy a burst, and there will always be enough space in the - * tx fifo to accept a burst (a tx burst will overwrite the fifo if - * there is not enough space), there must always remain enough empty - * space in the rx fifo for any data loaded to the tx fifo. - * Whenever burst_size (in bytes) equals bits/word, the fifo threshold - * will be 8, or half the fifo; - * The threshold can only be set to 2, 4 or 8, but not 16, because - * to burst 16 to the tx fifo, the fifo would have to be empty; - * however, the minimum fifo trigger level is 1, and the tx will - * request service when the fifo is at this level, with only 15 spaces. - */ + unsigned long ssp_clk = drv_data->max_clk_rate; + const struct ssp_device *ssp = drv_data->ssp; - /* find bytes/word */ - if (bits_per_word <= 8) - bytes_per_word = 1; - else if (bits_per_word <= 16) - bytes_per_word = 2; - else - bytes_per_word = 4; - - /* use struct pxa2xx_spi_chip->dma_burst_size if available */ - if (chip_info) - req_burst_size = chip_info->dma_burst_size; - else { - switch (chip->dma_burst_size) { - default: - /* if the default burst size is not set, - * do it now */ - chip->dma_burst_size = DCMD_BURST8; - case DCMD_BURST8: - req_burst_size = 8; - break; - case DCMD_BURST16: - req_burst_size = 16; - break; - case DCMD_BURST32: - req_burst_size = 32; - break; - } - } - if (req_burst_size <= 8) { - *burst_code = DCMD_BURST8; - burst_bytes = 8; - } else if (req_burst_size <= 16) { - if (bytes_per_word == 1) { - /* don't burst more than 1/2 the fifo */ - *burst_code = DCMD_BURST8; - burst_bytes = 8; - retval = 1; - } else { - *burst_code = DCMD_BURST16; - burst_bytes = 16; - } - } else { - if (bytes_per_word == 1) { - /* don't burst more than 1/2 the fifo */ - *burst_code = DCMD_BURST8; - burst_bytes = 8; - retval = 1; - } else if (bytes_per_word == 2) { - /* don't burst more than 1/2 the fifo */ - *burst_code = DCMD_BURST16; - burst_bytes = 16; - retval = 1; - } else { - *burst_code = DCMD_BURST32; - burst_bytes = 32; - } - } - - thresh_words = burst_bytes / bytes_per_word; - - /* thresh_words will be between 2 and 8 */ - *threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT) - | (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT); - - return retval; -} - -static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate) -{ - unsigned long ssp_clk = clk_get_rate(ssp->clk); + rate = min_t(int, ssp_clk, rate); if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP) return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8; @@ -934,7 +581,6 @@ static void pump_transfers(unsigned long data) struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; struct chip_data *chip = NULL; - struct ssp_device *ssp = drv_data->ssp; void __iomem *reg = drv_data->ioaddr; u32 clk_div = 0; u8 bits = 0; @@ -976,8 +622,8 @@ static void pump_transfers(unsigned long data) cs_deassert(drv_data); } - /* Check for transfers that need multiple DMA segments */ - if (transfer->len > MAX_DMA_LEN && chip->enable_dma) { + /* Check if we can DMA this transfer */ + if (!pxa2xx_spi_dma_is_possible(transfer->len) && chip->enable_dma) { /* reject already-mapped transfers; PIO won't always work */ if (message->is_dma_mapped @@ -1000,21 +646,20 @@ static void pump_transfers(unsigned long data) } /* Setup the transfer state based on the type of transfer */ - if (flush(drv_data) == 0) { + if (pxa2xx_spi_flush(drv_data) == 0) { dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); message->status = -EIO; giveback(drv_data); return; } drv_data->n_bytes = chip->n_bytes; - drv_data->dma_width = chip->dma_width; drv_data->tx = (void *)transfer->tx_buf; drv_data->tx_end = drv_data->tx + transfer->len; drv_data->rx = transfer->rx_buf; drv_data->rx_end = drv_data->rx + transfer->len; drv_data->rx_dma = transfer->rx_dma; drv_data->tx_dma = transfer->tx_dma; - drv_data->len = transfer->len & DCMD_LENGTH; + drv_data->len = transfer->len; drv_data->write = drv_data->tx ? chip->write : null_writer; drv_data->read = drv_data->rx ? chip->read : null_reader; @@ -1031,25 +676,22 @@ static void pump_transfers(unsigned long data) if (transfer->bits_per_word) bits = transfer->bits_per_word; - clk_div = ssp_get_clk_div(ssp, speed); + clk_div = ssp_get_clk_div(drv_data, speed); if (bits <= 8) { drv_data->n_bytes = 1; - drv_data->dma_width = DCMD_WIDTH1; drv_data->read = drv_data->read != null_reader ? u8_reader : null_reader; drv_data->write = drv_data->write != null_writer ? u8_writer : null_writer; } else if (bits <= 16) { drv_data->n_bytes = 2; - drv_data->dma_width = DCMD_WIDTH2; drv_data->read = drv_data->read != null_reader ? u16_reader : null_reader; drv_data->write = drv_data->write != null_writer ? u16_writer : null_writer; } else if (bits <= 32) { drv_data->n_bytes = 4; - drv_data->dma_width = DCMD_WIDTH4; drv_data->read = drv_data->read != null_reader ? u32_reader : null_reader; drv_data->write = drv_data->write != null_writer ? @@ -1058,7 +700,8 @@ static void pump_transfers(unsigned long data) /* if bits/word is changed in dma mode, then must check the * thresholds and burst also */ if (chip->enable_dma) { - if (set_dma_burst_and_threshold(chip, message->spi, + if (pxa2xx_spi_set_dma_burst_and_threshold(chip, + message->spi, bits, &dma_burst, &dma_thresh)) if (printk_ratelimit()) @@ -1077,70 +720,21 @@ static void pump_transfers(unsigned long data) message->state = RUNNING_STATE; - /* Try to map dma buffer and do a dma transfer if successful, but - * only if the length is non-zero and less than MAX_DMA_LEN. - * - * Zero-length non-descriptor DMA is illegal on PXA2xx; force use - * of PIO instead. Care is needed above because the transfer may - * have have been passed with buffers that are already dma mapped. - * A zero-length transfer in PIO mode will not try to write/read - * to/from the buffers - * - * REVISIT large transfers are exactly where we most want to be - * using DMA. If this happens much, split those transfers into - * multiple DMA segments rather than forcing PIO. - */ drv_data->dma_mapped = 0; - if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN) - drv_data->dma_mapped = map_dma_buffers(drv_data); + if (pxa2xx_spi_dma_is_possible(drv_data->len)) + drv_data->dma_mapped = pxa2xx_spi_map_dma_buffers(drv_data); if (drv_data->dma_mapped) { /* Ensure we have the correct interrupt handler */ - drv_data->transfer_handler = dma_transfer; - - /* Setup rx DMA Channel */ - DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; - DSADR(drv_data->rx_channel) = drv_data->ssdr_physical; - DTADR(drv_data->rx_channel) = drv_data->rx_dma; - if (drv_data->rx == drv_data->null_dma_buf) - /* No target address increment */ - DCMD(drv_data->rx_channel) = DCMD_FLOWSRC - | drv_data->dma_width - | dma_burst - | drv_data->len; - else - DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR - | DCMD_FLOWSRC - | drv_data->dma_width - | dma_burst - | drv_data->len; - - /* Setup tx DMA Channel */ - DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; - DSADR(drv_data->tx_channel) = drv_data->tx_dma; - DTADR(drv_data->tx_channel) = drv_data->ssdr_physical; - if (drv_data->tx == drv_data->null_dma_buf) - /* No source address increment */ - DCMD(drv_data->tx_channel) = DCMD_FLOWTRG - | drv_data->dma_width - | dma_burst - | drv_data->len; - else - DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR - | DCMD_FLOWTRG - | drv_data->dma_width - | dma_burst - | drv_data->len; - - /* Enable dma end irqs on SSP to detect end of transfer */ - if (drv_data->ssp_type == PXA25x_SSP) - DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN; + drv_data->transfer_handler = pxa2xx_spi_dma_transfer; + + pxa2xx_spi_dma_prepare(drv_data, dma_burst); /* Clear status and start DMA engine */ cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1; write_SSSR(drv_data->clear_sr, reg); - DCSR(drv_data->rx_channel) |= DCSR_RUN; - DCSR(drv_data->tx_channel) |= DCSR_RUN; + + pxa2xx_spi_dma_start(drv_data); } else { /* Ensure we have the correct interrupt handler */ drv_data->transfer_handler = interrupt_transfer; @@ -1150,6 +744,13 @@ static void pump_transfers(unsigned long data) write_SSSR_CS(drv_data, drv_data->clear_sr); } + if (is_lpss_ssp(drv_data)) { + if ((read_SSIRF(reg) & 0xff) != chip->lpss_rx_threshold) + write_SSIRF(chip->lpss_rx_threshold, reg); + if ((read_SSITF(reg) & 0xffff) != chip->lpss_tx_threshold) + write_SSITF(chip->lpss_tx_threshold, reg); + } + /* see if we need to reload the config registers */ if ((read_SSCR0(reg) != cr0) || (read_SSCR1(reg) & SSCR1_CHANGE_MASK) != @@ -1176,31 +777,12 @@ static void pump_transfers(unsigned long data) write_SSCR1(cr1, reg); } -static void pump_messages(struct work_struct *work) +static int pxa2xx_spi_transfer_one_message(struct spi_master *master, + struct spi_message *msg) { - struct driver_data *drv_data = - container_of(work, struct driver_data, pump_messages); - unsigned long flags; - - /* Lock queue and check for queue work */ - spin_lock_irqsave(&drv_data->lock, flags); - if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { - drv_data->busy = 0; - spin_unlock_irqrestore(&drv_data->lock, flags); - return; - } - - /* Make sure we are not already running a message */ - if (drv_data->cur_msg) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return; - } - - /* Extract head of queue */ - drv_data->cur_msg = list_entry(drv_data->queue.next, - struct spi_message, queue); - list_del_init(&drv_data->cur_msg->queue); + struct driver_data *drv_data = spi_master_get_devdata(master); + drv_data->cur_msg = msg; /* Initial message state*/ drv_data->cur_msg->state = START_STATE; drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, @@ -1213,34 +795,27 @@ static void pump_messages(struct work_struct *work) /* Mark as busy and launch transfers */ tasklet_schedule(&drv_data->pump_transfers); - - drv_data->busy = 1; - spin_unlock_irqrestore(&drv_data->lock, flags); + return 0; } -static int transfer(struct spi_device *spi, struct spi_message *msg) +static int pxa2xx_spi_prepare_transfer(struct spi_master *master) { - struct driver_data *drv_data = spi_master_get_devdata(spi->master); - unsigned long flags; - - spin_lock_irqsave(&drv_data->lock, flags); - - if (drv_data->run == QUEUE_STOPPED) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return -ESHUTDOWN; - } - - msg->actual_length = 0; - msg->status = -EINPROGRESS; - msg->state = START_STATE; + struct driver_data *drv_data = spi_master_get_devdata(master); - list_add_tail(&msg->queue, &drv_data->queue); + pm_runtime_get_sync(&drv_data->pdev->dev); + return 0; +} - if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) - queue_work(drv_data->workqueue, &drv_data->pump_messages); +static int pxa2xx_spi_unprepare_transfer(struct spi_master *master) +{ + struct driver_data *drv_data = spi_master_get_devdata(master); - spin_unlock_irqrestore(&drv_data->lock, flags); + /* Disable the SSP now */ + write_SSCR0(read_SSCR0(drv_data->ioaddr) & ~SSCR0_SSE, + drv_data->ioaddr); + pm_runtime_mark_last_busy(&drv_data->pdev->dev); + pm_runtime_put_autosuspend(&drv_data->pdev->dev); return 0; } @@ -1287,10 +862,18 @@ static int setup(struct spi_device *spi) struct pxa2xx_spi_chip *chip_info = NULL; struct chip_data *chip; struct driver_data *drv_data = spi_master_get_devdata(spi->master); - struct ssp_device *ssp = drv_data->ssp; unsigned int clk_div; - uint tx_thres = TX_THRESH_DFLT; - uint rx_thres = RX_THRESH_DFLT; + uint tx_thres, tx_hi_thres, rx_thres; + + if (is_lpss_ssp(drv_data)) { + tx_thres = LPSS_TX_LOTHRESH_DFLT; + tx_hi_thres = LPSS_TX_HITHRESH_DFLT; + rx_thres = LPSS_RX_THRESH_DFLT; + } else { + tx_thres = TX_THRESH_DFLT; + tx_hi_thres = 0; + rx_thres = RX_THRESH_DFLT; + } if (!pxa25x_ssp_comp(drv_data) && (spi->bits_per_word < 4 || spi->bits_per_word > 32)) { @@ -1330,8 +913,6 @@ static int setup(struct spi_device *spi) chip->gpio_cs = -1; chip->enable_dma = 0; chip->timeout = TIMOUT_DFLT; - chip->dma_burst_size = drv_data->master_info->enable_dma ? - DCMD_BURST8 : 0; } /* protocol drivers may change the chip settings, so... @@ -1345,23 +926,37 @@ static int setup(struct spi_device *spi) chip->timeout = chip_info->timeout; if (chip_info->tx_threshold) tx_thres = chip_info->tx_threshold; + if (chip_info->tx_hi_threshold) + tx_hi_thres = chip_info->tx_hi_threshold; if (chip_info->rx_threshold) rx_thres = chip_info->rx_threshold; chip->enable_dma = drv_data->master_info->enable_dma; chip->dma_threshold = 0; if (chip_info->enable_loopback) chip->cr1 = SSCR1_LBM; + } else if (ACPI_HANDLE(&spi->dev)) { + /* + * Slave devices enumerated from ACPI namespace don't + * usually have chip_info but we still might want to use + * DMA with them. + */ + chip->enable_dma = drv_data->master_info->enable_dma; } chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) | (SSCR1_TxTresh(tx_thres) & SSCR1_TFT); + chip->lpss_rx_threshold = SSIRF_RxThresh(rx_thres); + chip->lpss_tx_threshold = SSITF_TxLoThresh(tx_thres) + | SSITF_TxHiThresh(tx_hi_thres); + /* set dma burst and threshold outside of chip_info path so that if * chip_info goes away after setting chip->enable_dma, the * burst and threshold can still respond to changes in bits_per_word */ if (chip->enable_dma) { /* set up legal burst and threshold for dma */ - if (set_dma_burst_and_threshold(chip, spi, spi->bits_per_word, + if (pxa2xx_spi_set_dma_burst_and_threshold(chip, spi, + spi->bits_per_word, &chip->dma_burst_size, &chip->dma_threshold)) { dev_warn(&spi->dev, "in setup: DMA burst size reduced " @@ -1369,7 +964,7 @@ static int setup(struct spi_device *spi) } } - clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz); + clk_div = ssp_get_clk_div(drv_data, spi->max_speed_hz); chip->speed_hz = spi->max_speed_hz; chip->cr0 = clk_div @@ -1382,32 +977,32 @@ static int setup(struct spi_device *spi) chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0) | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0); + if (spi->mode & SPI_LOOP) + chip->cr1 |= SSCR1_LBM; + /* NOTE: PXA25x_SSP _could_ use external clocking ... */ if (!pxa25x_ssp_comp(drv_data)) dev_dbg(&spi->dev, "%ld Hz actual, %s\n", - clk_get_rate(ssp->clk) + drv_data->max_clk_rate / (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)), chip->enable_dma ? "DMA" : "PIO"); else dev_dbg(&spi->dev, "%ld Hz actual, %s\n", - clk_get_rate(ssp->clk) / 2 + drv_data->max_clk_rate / 2 / (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)), chip->enable_dma ? "DMA" : "PIO"); if (spi->bits_per_word <= 8) { chip->n_bytes = 1; - chip->dma_width = DCMD_WIDTH1; chip->read = u8_reader; chip->write = u8_writer; } else if (spi->bits_per_word <= 16) { chip->n_bytes = 2; - chip->dma_width = DCMD_WIDTH2; chip->read = u16_reader; chip->write = u16_writer; } else if (spi->bits_per_word <= 32) { chip->cr0 |= SSCR0_EDSS; chip->n_bytes = 4; - chip->dma_width = DCMD_WIDTH4; chip->read = u32_reader; chip->write = u32_writer; } else { @@ -1438,93 +1033,98 @@ static void cleanup(struct spi_device *spi) kfree(chip); } -static int init_queue(struct driver_data *drv_data) +#ifdef CONFIG_ACPI +static int pxa2xx_spi_acpi_add_dma(struct acpi_resource *res, void *data) { - INIT_LIST_HEAD(&drv_data->queue); - spin_lock_init(&drv_data->lock); - - drv_data->run = QUEUE_STOPPED; - drv_data->busy = 0; - - tasklet_init(&drv_data->pump_transfers, - pump_transfers, (unsigned long)drv_data); - - INIT_WORK(&drv_data->pump_messages, pump_messages); - drv_data->workqueue = create_singlethread_workqueue( - dev_name(drv_data->master->dev.parent)); - if (drv_data->workqueue == NULL) - return -EBUSY; + struct pxa2xx_spi_master *pdata = data; + + if (res->type == ACPI_RESOURCE_TYPE_FIXED_DMA) { + const struct acpi_resource_fixed_dma *dma; + + dma = &res->data.fixed_dma; + if (pdata->tx_slave_id < 0) { + pdata->tx_slave_id = dma->request_lines; + pdata->tx_chan_id = dma->channels; + } else if (pdata->rx_slave_id < 0) { + pdata->rx_slave_id = dma->request_lines; + pdata->rx_chan_id = dma->channels; + } + } - return 0; + /* Tell the ACPI core to skip this resource */ + return 1; } -static int start_queue(struct driver_data *drv_data) +static struct pxa2xx_spi_master * +pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) { - unsigned long flags; - - spin_lock_irqsave(&drv_data->lock, flags); - - if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { - spin_unlock_irqrestore(&drv_data->lock, flags); - return -EBUSY; + struct pxa2xx_spi_master *pdata; + struct list_head resource_list; + struct acpi_device *adev; + struct ssp_device *ssp; + struct resource *res; + int devid; + + if (!ACPI_HANDLE(&pdev->dev) || + acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev)) + return NULL; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*ssp), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, + "failed to allocate memory for platform data\n"); + return NULL; } - drv_data->run = QUEUE_RUNNING; - drv_data->cur_msg = NULL; - drv_data->cur_transfer = NULL; - drv_data->cur_chip = NULL; - spin_unlock_irqrestore(&drv_data->lock, flags); - - queue_work(drv_data->workqueue, &drv_data->pump_messages); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return NULL; - return 0; -} + ssp = &pdata->ssp; -static int stop_queue(struct driver_data *drv_data) -{ - unsigned long flags; - unsigned limit = 500; - int status = 0; - - spin_lock_irqsave(&drv_data->lock, flags); - - /* This is a bit lame, but is optimized for the common execution path. - * A wait_queue on the drv_data->busy could be used, but then the common - * execution path (pump_messages) would be required to call wake_up or - * friends on every SPI message. Do this instead */ - drv_data->run = QUEUE_STOPPED; - while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) { - spin_unlock_irqrestore(&drv_data->lock, flags); - msleep(10); - spin_lock_irqsave(&drv_data->lock, flags); + ssp->phys_base = res->start; + ssp->mmio_base = devm_request_and_ioremap(&pdev->dev, res); + if (!ssp->mmio_base) { + dev_err(&pdev->dev, "failed to ioremap mmio_base\n"); + return NULL; } - if (!list_empty(&drv_data->queue) || drv_data->busy) - status = -EBUSY; + ssp->clk = devm_clk_get(&pdev->dev, NULL); + ssp->irq = platform_get_irq(pdev, 0); + ssp->type = LPSS_SSP; + ssp->pdev = pdev; - spin_unlock_irqrestore(&drv_data->lock, flags); + ssp->port_id = -1; + if (adev->pnp.unique_id && !kstrtoint(adev->pnp.unique_id, 0, &devid)) + ssp->port_id = devid; - return status; -} + pdata->num_chipselect = 1; + pdata->rx_slave_id = -1; + pdata->tx_slave_id = -1; -static int destroy_queue(struct driver_data *drv_data) -{ - int status; + INIT_LIST_HEAD(&resource_list); + acpi_dev_get_resources(adev, &resource_list, pxa2xx_spi_acpi_add_dma, + pdata); + acpi_dev_free_resource_list(&resource_list); - status = stop_queue(drv_data); - /* we are unloading the module or failing to load (only two calls - * to this routine), and neither call can handle a return value. - * However, destroy_workqueue calls flush_workqueue, and that will - * block until all work is done. If the reason that stop_queue - * timed out is that the work will never finish, then it does no - * good to call destroy_workqueue, so return anyway. */ - if (status != 0) - return status; + pdata->enable_dma = pdata->rx_slave_id >= 0 && pdata->tx_slave_id >= 0; - destroy_workqueue(drv_data->workqueue); + return pdata; +} - return 0; +static struct acpi_device_id pxa2xx_spi_acpi_match[] = { + { "INT33C0", 0 }, + { "INT33C1", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match); +#else +static inline struct pxa2xx_spi_master * +pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) +{ + return NULL; } +#endif static int pxa2xx_spi_probe(struct platform_device *pdev) { @@ -1535,11 +1135,21 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) struct ssp_device *ssp; int status; - platform_info = dev->platform_data; + platform_info = dev_get_platdata(dev); + if (!platform_info) { + platform_info = pxa2xx_spi_acpi_get_pdata(pdev); + if (!platform_info) { + dev_err(&pdev->dev, "missing platform data\n"); + return -ENODEV; + } + } ssp = pxa_ssp_request(pdev->id, pdev->name); - if (ssp == NULL) { - dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id); + if (!ssp) + ssp = &platform_info->ssp; + + if (!ssp->mmio_base) { + dev_err(&pdev->dev, "failed to get ssp\n"); return -ENODEV; } @@ -1558,19 +1168,21 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) master->dev.parent = &pdev->dev; master->dev.of_node = pdev->dev.of_node; + ACPI_HANDLE_SET(&master->dev, ACPI_HANDLE(&pdev->dev)); /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; - master->bus_num = pdev->id; + master->bus_num = ssp->port_id; master->num_chipselect = platform_info->num_chipselect; master->dma_alignment = DMA_ALIGNMENT; master->cleanup = cleanup; master->setup = setup; - master->transfer = transfer; + master->transfer_one_message = pxa2xx_spi_transfer_one_message; + master->prepare_transfer_hardware = pxa2xx_spi_prepare_transfer; + master->unprepare_transfer_hardware = pxa2xx_spi_unprepare_transfer; drv_data->ssp_type = ssp->type; - drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data + - sizeof(struct driver_data)), 8); + drv_data->null_dma_buf = (u32 *)PTR_ALIGN(&drv_data[1], DMA_ALIGNMENT); drv_data->ioaddr = ssp->mmio_base; drv_data->ssdr_physical = ssp->phys_base + SSDR; @@ -1581,7 +1193,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR; } else { drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE; - drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE; + drv_data->dma_cr1 = DEFAULT_DMA_CR1; drv_data->clear_sr = SSSR_ROR | SSSR_TINT; drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR; } @@ -1597,35 +1209,17 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) drv_data->tx_channel = -1; drv_data->rx_channel = -1; if (platform_info->enable_dma) { - - /* Get two DMA channels (rx and tx) */ - drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx", - DMA_PRIO_HIGH, - dma_handler, - drv_data); - if (drv_data->rx_channel < 0) { - dev_err(dev, "problem (%d) requesting rx channel\n", - drv_data->rx_channel); - status = -ENODEV; - goto out_error_irq_alloc; + status = pxa2xx_spi_dma_setup(drv_data); + if (status) { + dev_warn(dev, "failed to setup DMA, using PIO\n"); + platform_info->enable_dma = false; } - drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx", - DMA_PRIO_MEDIUM, - dma_handler, - drv_data); - if (drv_data->tx_channel < 0) { - dev_err(dev, "problem (%d) requesting tx channel\n", - drv_data->tx_channel); - status = -ENODEV; - goto out_error_dma_alloc; - } - - DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel; - DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel; } /* Enable SOC clock */ - clk_enable(ssp->clk); + clk_prepare_enable(ssp->clk); + + drv_data->max_clk_rate = clk_get_rate(ssp->clk); /* Load default SSP configuration */ write_SSCR0(0, drv_data->ioaddr); @@ -1640,41 +1234,29 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) write_SSTO(0, drv_data->ioaddr); write_SSPSP(0, drv_data->ioaddr); - /* Initial and start queue */ - status = init_queue(drv_data); - if (status != 0) { - dev_err(&pdev->dev, "problem initializing queue\n"); - goto out_error_clock_enabled; - } - status = start_queue(drv_data); - if (status != 0) { - dev_err(&pdev->dev, "problem starting queue\n"); - goto out_error_clock_enabled; - } + lpss_ssp_setup(drv_data); + + tasklet_init(&drv_data->pump_transfers, pump_transfers, + (unsigned long)drv_data); /* Register with the SPI framework */ platform_set_drvdata(pdev, drv_data); status = spi_register_master(master); if (status != 0) { dev_err(&pdev->dev, "problem registering spi master\n"); - goto out_error_queue_alloc; + goto out_error_clock_enabled; } - return status; + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); -out_error_queue_alloc: - destroy_queue(drv_data); + return status; out_error_clock_enabled: - clk_disable(ssp->clk); - -out_error_dma_alloc: - if (drv_data->tx_channel != -1) - pxa_free_dma(drv_data->tx_channel); - if (drv_data->rx_channel != -1) - pxa_free_dma(drv_data->rx_channel); - -out_error_irq_alloc: + clk_disable_unprepare(ssp->clk); + pxa2xx_spi_dma_release(drv_data); free_irq(ssp->irq, drv_data); out_error_master_alloc: @@ -1687,37 +1269,23 @@ static int pxa2xx_spi_remove(struct platform_device *pdev) { struct driver_data *drv_data = platform_get_drvdata(pdev); struct ssp_device *ssp; - int status = 0; if (!drv_data) return 0; ssp = drv_data->ssp; - /* Remove the queue */ - status = destroy_queue(drv_data); - if (status != 0) - /* the kernel does not check the return status of this - * this routine (mod->exit, within the kernel). Therefore - * nothing is gained by returning from here, the module is - * going away regardless, and we should not leave any more - * resources allocated than necessary. We cannot free the - * message memory in drv_data->queue, but we can release the - * resources below. I think the kernel should honor -EBUSY - * returns but... */ - dev_err(&pdev->dev, "pxa2xx_spi_remove: workqueue will not " - "complete, message memory not freed\n"); + pm_runtime_get_sync(&pdev->dev); /* Disable the SSP at the peripheral and SOC level */ write_SSCR0(0, drv_data->ioaddr); - clk_disable(ssp->clk); + clk_disable_unprepare(ssp->clk); /* Release DMA */ - if (drv_data->master_info->enable_dma) { - DRCMR(ssp->drcmr_rx) = 0; - DRCMR(ssp->drcmr_tx) = 0; - pxa_free_dma(drv_data->tx_channel); - pxa_free_dma(drv_data->rx_channel); - } + if (drv_data->master_info->enable_dma) + pxa2xx_spi_dma_release(drv_data); + + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_disable(&pdev->dev); /* Release IRQ */ free_irq(ssp->irq, drv_data); @@ -1749,11 +1317,11 @@ static int pxa2xx_spi_suspend(struct device *dev) struct ssp_device *ssp = drv_data->ssp; int status = 0; - status = stop_queue(drv_data); + status = spi_master_suspend(drv_data->master); if (status != 0) return status; write_SSCR0(0, drv_data->ioaddr); - clk_disable(ssp->clk); + clk_disable_unprepare(ssp->clk); return 0; } @@ -1764,18 +1332,13 @@ static int pxa2xx_spi_resume(struct device *dev) struct ssp_device *ssp = drv_data->ssp; int status = 0; - if (drv_data->rx_channel != -1) - DRCMR(drv_data->ssp->drcmr_rx) = - DRCMR_MAPVLD | drv_data->rx_channel; - if (drv_data->tx_channel != -1) - DRCMR(drv_data->ssp->drcmr_tx) = - DRCMR_MAPVLD | drv_data->tx_channel; + pxa2xx_spi_dma_resume(drv_data); /* Enable the SSP clock */ - clk_enable(ssp->clk); + clk_prepare_enable(ssp->clk); /* Start the queue running */ - status = start_queue(drv_data); + status = spi_master_resume(drv_data->master); if (status != 0) { dev_err(dev, "problem starting queue (%d)\n", status); return status; @@ -1783,20 +1346,38 @@ static int pxa2xx_spi_resume(struct device *dev) return 0; } +#endif + +#ifdef CONFIG_PM_RUNTIME +static int pxa2xx_spi_runtime_suspend(struct device *dev) +{ + struct driver_data *drv_data = dev_get_drvdata(dev); + + clk_disable_unprepare(drv_data->ssp->clk); + return 0; +} + +static int pxa2xx_spi_runtime_resume(struct device *dev) +{ + struct driver_data *drv_data = dev_get_drvdata(dev); + + clk_prepare_enable(drv_data->ssp->clk); + return 0; +} +#endif static const struct dev_pm_ops pxa2xx_spi_pm_ops = { - .suspend = pxa2xx_spi_suspend, - .resume = pxa2xx_spi_resume, + SET_SYSTEM_SLEEP_PM_OPS(pxa2xx_spi_suspend, pxa2xx_spi_resume) + SET_RUNTIME_PM_OPS(pxa2xx_spi_runtime_suspend, + pxa2xx_spi_runtime_resume, NULL) }; -#endif static struct platform_driver driver = { .driver = { .name = "pxa2xx-spi", .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &pxa2xx_spi_pm_ops, -#endif + .acpi_match_table = ACPI_PTR(pxa2xx_spi_acpi_match), }, .probe = pxa2xx_spi_probe, .remove = pxa2xx_spi_remove, diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h new file mode 100644 index 000000000000..5adc2a11c7bc --- /dev/null +++ b/drivers/spi/spi-pxa2xx.h @@ -0,0 +1,221 @@ +/* + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * Copyright (C) 2013, Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef SPI_PXA2XX_H +#define SPI_PXA2XX_H + +#include <linux/atomic.h> +#include <linux/dmaengine.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/pxa2xx_ssp.h> +#include <linux/scatterlist.h> +#include <linux/sizes.h> +#include <linux/spi/spi.h> +#include <linux/spi/pxa2xx_spi.h> + +struct driver_data { + /* Driver model hookup */ + struct platform_device *pdev; + + /* SSP Info */ + struct ssp_device *ssp; + + /* SPI framework hookup */ + enum pxa_ssp_type ssp_type; + struct spi_master *master; + + /* PXA hookup */ + struct pxa2xx_spi_master *master_info; + + /* PXA private DMA setup stuff */ + int rx_channel; + int tx_channel; + u32 *null_dma_buf; + + /* SSP register addresses */ + void __iomem *ioaddr; + u32 ssdr_physical; + + /* SSP masks*/ + u32 dma_cr1; + u32 int_cr1; + u32 clear_sr; + u32 mask_sr; + + /* Maximun clock rate */ + unsigned long max_clk_rate; + + /* Message Transfer pump */ + struct tasklet_struct pump_transfers; + + /* DMA engine support */ + struct dma_chan *rx_chan; + struct dma_chan *tx_chan; + struct sg_table rx_sgt; + struct sg_table tx_sgt; + int rx_nents; + int tx_nents; + void *dummy; + atomic_t dma_running; + + /* Current message transfer state info */ + struct spi_message *cur_msg; + struct spi_transfer *cur_transfer; + struct chip_data *cur_chip; + size_t len; + void *tx; + void *tx_end; + void *rx; + void *rx_end; + int dma_mapped; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + size_t rx_map_len; + size_t tx_map_len; + u8 n_bytes; + int (*write)(struct driver_data *drv_data); + int (*read)(struct driver_data *drv_data); + irqreturn_t (*transfer_handler)(struct driver_data *drv_data); + void (*cs_control)(u32 command); + + void __iomem *lpss_base; +}; + +struct chip_data { + u32 cr0; + u32 cr1; + u32 psp; + u32 timeout; + u8 n_bytes; + u32 dma_burst_size; + u32 threshold; + u32 dma_threshold; + u16 lpss_rx_threshold; + u16 lpss_tx_threshold; + u8 enable_dma; + u8 bits_per_word; + u32 speed_hz; + union { + int gpio_cs; + unsigned int frm; + }; + int gpio_cs_inverted; + int (*write)(struct driver_data *drv_data); + int (*read)(struct driver_data *drv_data); + void (*cs_control)(u32 command); +}; + +#define DEFINE_SSP_REG(reg, off) \ +static inline u32 read_##reg(void const __iomem *p) \ +{ return __raw_readl(p + (off)); } \ +\ +static inline void write_##reg(u32 v, void __iomem *p) \ +{ __raw_writel(v, p + (off)); } + +DEFINE_SSP_REG(SSCR0, 0x00) +DEFINE_SSP_REG(SSCR1, 0x04) +DEFINE_SSP_REG(SSSR, 0x08) +DEFINE_SSP_REG(SSITR, 0x0c) +DEFINE_SSP_REG(SSDR, 0x10) +DEFINE_SSP_REG(SSTO, 0x28) +DEFINE_SSP_REG(SSPSP, 0x2c) +DEFINE_SSP_REG(SSITF, SSITF) +DEFINE_SSP_REG(SSIRF, SSIRF) + +#define START_STATE ((void *)0) +#define RUNNING_STATE ((void *)1) +#define DONE_STATE ((void *)2) +#define ERROR_STATE ((void *)-1) + +#define IS_DMA_ALIGNED(x) IS_ALIGNED((unsigned long)(x), DMA_ALIGNMENT) +#define DMA_ALIGNMENT 8 + +static inline int pxa25x_ssp_comp(struct driver_data *drv_data) +{ + if (drv_data->ssp_type == PXA25x_SSP) + return 1; + if (drv_data->ssp_type == CE4100_SSP) + return 1; + return 0; +} + +static inline void write_SSSR_CS(struct driver_data *drv_data, u32 val) +{ + void __iomem *reg = drv_data->ioaddr; + + if (drv_data->ssp_type == CE4100_SSP) + val |= read_SSSR(reg) & SSSR_ALT_FRM_MASK; + + write_SSSR(val, reg); +} + +extern int pxa2xx_spi_flush(struct driver_data *drv_data); +extern void *pxa2xx_spi_next_transfer(struct driver_data *drv_data); + +/* + * Select the right DMA implementation. + */ +#if defined(CONFIG_SPI_PXA2XX_PXADMA) +#define SPI_PXA2XX_USE_DMA 1 +#define MAX_DMA_LEN 8191 +#define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE) +#elif defined(CONFIG_SPI_PXA2XX_DMA) +#define SPI_PXA2XX_USE_DMA 1 +#define MAX_DMA_LEN SZ_64K +#define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TRAIL) +#else +#undef SPI_PXA2XX_USE_DMA +#define MAX_DMA_LEN 0 +#define DEFAULT_DMA_CR1 0 +#endif + +#ifdef SPI_PXA2XX_USE_DMA +extern bool pxa2xx_spi_dma_is_possible(size_t len); +extern int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data); +extern irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data); +extern int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst); +extern void pxa2xx_spi_dma_start(struct driver_data *drv_data); +extern int pxa2xx_spi_dma_setup(struct driver_data *drv_data); +extern void pxa2xx_spi_dma_release(struct driver_data *drv_data); +extern void pxa2xx_spi_dma_resume(struct driver_data *drv_data); +extern int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip, + struct spi_device *spi, + u8 bits_per_word, + u32 *burst_code, + u32 *threshold); +#else +static inline bool pxa2xx_spi_dma_is_possible(size_t len) { return false; } +static inline int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data) +{ + return 0; +} +#define pxa2xx_spi_dma_transfer NULL +static inline void pxa2xx_spi_dma_prepare(struct driver_data *drv_data, + u32 dma_burst) {} +static inline void pxa2xx_spi_dma_start(struct driver_data *drv_data) {} +static inline int pxa2xx_spi_dma_setup(struct driver_data *drv_data) +{ + return 0; +} +static inline void pxa2xx_spi_dma_release(struct driver_data *drv_data) {} +static inline void pxa2xx_spi_dma_resume(struct driver_data *drv_data) {} +static inline int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip, + struct spi_device *spi, + u8 bits_per_word, + u32 *burst_code, + u32 *threshold) +{ + return -ENODEV; +} +#endif + +#endif /* SPI_PXA2XX_H */ diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index ad93231a8038..e862ab8853aa 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -62,7 +62,7 @@ #define S3C64XX_SPI_CLKSEL_SRCMSK (3<<9) #define S3C64XX_SPI_CLKSEL_SRCSHFT 9 #define S3C64XX_SPI_ENCLK_ENABLE (1<<8) -#define S3C64XX_SPI_PSR_MASK 0xff +#define S3C64XX_SPI_PSR_MASK 0xff #define S3C64XX_SPI_MODE_CH_TSZ_BYTE (0<<29) #define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD (1<<29) @@ -134,7 +134,6 @@ struct s3c64xx_spi_dma_data { unsigned ch; enum dma_transfer_direction direction; enum dma_ch dmach; - struct property *dma_prop; }; /** @@ -319,16 +318,15 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma, static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) { struct samsung_dma_req req; + struct device *dev = &sdd->pdev->dev; sdd->ops = samsung_dma_get_ops(); req.cap = DMA_SLAVE; req.client = &s3c64xx_spi_dma_client; - req.dt_dmach_prop = sdd->rx_dma.dma_prop; - sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &req); - req.dt_dmach_prop = sdd->tx_dma.dma_prop; - sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &req); + sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &req, dev, "rx"); + sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &req, dev, "tx"); return 1; } @@ -697,7 +695,7 @@ static int s3c64xx_spi_transfer_one_message(struct spi_master *master, INIT_COMPLETION(sdd->xfer_completion); /* Only BPW and Speed may change across transfers */ - bpw = xfer->bits_per_word ? : spi->bits_per_word; + bpw = xfer->bits_per_word; speed = xfer->speed_hz ? : spi->max_speed_hz; if (xfer->len % (bpw / 8)) { @@ -743,8 +741,7 @@ static int s3c64xx_spi_transfer_one_message(struct spi_master *master, sdd->regs + S3C64XX_SPI_SLAVE_SEL); if (status) { - dev_err(&spi->dev, "I/O Error: " - "rx-%d tx-%d res:rx-%c tx-%c len-%d\n", + dev_err(&spi->dev, "I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n", xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, (sdd->state & RXBUSY) ? 'f' : 'p', (sdd->state & TXBUSY) ? 'f' : 'p', @@ -799,7 +796,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi) /* Acquire DMA channels */ while (!acquire_dma(sdd)) - msleep(10); + usleep_range(10000, 11000); pm_runtime_get_sync(&sdd->pdev->dev); @@ -841,16 +838,14 @@ static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata( cs = kzalloc(sizeof(*cs), GFP_KERNEL); if (!cs) { - dev_err(&spi->dev, "could not allocate memory for controller" - " data\n"); + dev_err(&spi->dev, "could not allocate memory for controller data\n"); of_node_put(data_np); return ERR_PTR(-ENOMEM); } cs->line = of_get_named_gpio(data_np, "cs-gpio", 0); if (!gpio_is_valid(cs->line)) { - dev_err(&spi->dev, "chip select gpio is not specified or " - "invalid\n"); + dev_err(&spi->dev, "chip select gpio is not specified or invalid\n"); kfree(cs); of_node_put(data_np); return ERR_PTR(-EINVAL); @@ -957,6 +952,8 @@ static int s3c64xx_spi_setup(struct spi_device *spi) if (spi->max_speed_hz >= speed) { spi->max_speed_hz = speed; } else { + dev_err(&spi->dev, "Can't set %dHz transfer speed\n", + spi->max_speed_hz); err = -EINVAL; goto setup_exit; } @@ -1054,49 +1051,6 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) flush_fifo(sdd); } -static int s3c64xx_spi_get_dmares( - struct s3c64xx_spi_driver_data *sdd, bool tx) -{ - struct platform_device *pdev = sdd->pdev; - struct s3c64xx_spi_dma_data *dma_data; - struct property *prop; - struct resource *res; - char prop_name[15], *chan_str; - - if (tx) { - dma_data = &sdd->tx_dma; - dma_data->direction = DMA_MEM_TO_DEV; - chan_str = "tx"; - } else { - dma_data = &sdd->rx_dma; - dma_data->direction = DMA_DEV_TO_MEM; - chan_str = "rx"; - } - - if (!sdd->pdev->dev.of_node) { - res = platform_get_resource(pdev, IORESOURCE_DMA, tx ? 0 : 1); - if (!res) { - dev_err(&pdev->dev, "Unable to get SPI-%s dma " - "resource\n", chan_str); - return -ENXIO; - } - dma_data->dmach = res->start; - return 0; - } - - sprintf(prop_name, "%s-dma-channel", chan_str); - prop = of_find_property(pdev->dev.of_node, prop_name, NULL); - if (!prop) { - dev_err(&pdev->dev, "%s dma channel property not specified\n", - chan_str); - return -ENXIO; - } - - dma_data->dmach = DMACH_DT_PROP; - dma_data->dma_prop = prop; - return 0; -} - #ifdef CONFIG_OF static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd) { @@ -1133,8 +1087,7 @@ static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd) gpio_free(sdd->gpios[idx]); } -static struct s3c64xx_spi_info * s3c64xx_spi_parse_dt( - struct device *dev) +static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) { struct s3c64xx_spi_info *sci; u32 temp; @@ -1146,16 +1099,14 @@ static struct s3c64xx_spi_info * s3c64xx_spi_parse_dt( } if (of_property_read_u32(dev->of_node, "samsung,spi-src-clk", &temp)) { - dev_warn(dev, "spi bus clock parent not specified, using " - "clock at index 0 as parent\n"); + dev_warn(dev, "spi bus clock parent not specified, using clock at index 0 as parent\n"); sci->src_clk_nr = 0; } else { sci->src_clk_nr = temp; } if (of_property_read_u32(dev->of_node, "num-cs", &temp)) { - dev_warn(dev, "number of chip select lines not specified, " - "assuming 1 chip select line\n"); + dev_warn(dev, "number of chip select lines not specified, assuming 1 chip select line\n"); sci->num_cs = 1; } else { sci->num_cs = temp; @@ -1195,9 +1146,10 @@ static inline struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config( platform_get_device_id(pdev)->driver_data; } -static int __init s3c64xx_spi_probe(struct platform_device *pdev) +static int s3c64xx_spi_probe(struct platform_device *pdev) { struct resource *mem_res; + struct resource *res; struct s3c64xx_spi_driver_data *sdd; struct s3c64xx_spi_info *sci = pdev->dev.platform_data; struct spi_master *master; @@ -1245,8 +1197,8 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) if (pdev->dev.of_node) { ret = of_alias_get_id(pdev->dev.of_node, "spi"); if (ret < 0) { - dev_err(&pdev->dev, "failed to get alias id, " - "errno %d\n", ret); + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", + ret); goto err0; } sdd->port_id = ret; @@ -1256,13 +1208,26 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) sdd->cur_bpw = 8; - ret = s3c64xx_spi_get_dmares(sdd, true); - if (ret) - goto err0; + if (!sdd->pdev->dev.of_node) { + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!res) { + dev_err(&pdev->dev, "Unable to get SPI tx dma " + "resource\n"); + return -ENXIO; + } + sdd->tx_dma.dmach = res->start; - ret = s3c64xx_spi_get_dmares(sdd, false); - if (ret) - goto err0; + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (!res) { + dev_err(&pdev->dev, "Unable to get SPI rx dma " + "resource\n"); + return -ENXIO; + } + sdd->rx_dma.dmach = res->start; + } + + sdd->tx_dma.direction = DMA_MEM_TO_DEV; + sdd->rx_dma.direction = DMA_DEV_TO_MEM; master->dev.of_node = pdev->dev.of_node; master->bus_num = sdd->port_id; @@ -1276,11 +1241,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) /* the spi->mode bits understood by this driver: */ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - sdd->regs = devm_request_and_ioremap(&pdev->dev, mem_res); - if (sdd->regs == NULL) { - dev_err(&pdev->dev, "Unable to remap IO\n"); - ret = -ENXIO; - goto err1; + sdd->regs = devm_ioremap_resource(&pdev->dev, mem_res); + if (IS_ERR(sdd->regs)) { + ret = PTR_ERR(sdd->regs); + goto err0; } if (!sci->cfg_gpio && pdev->dev.of_node) { @@ -1289,36 +1253,36 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) } else if (sci->cfg_gpio == NULL || sci->cfg_gpio()) { dev_err(&pdev->dev, "Unable to config gpio\n"); ret = -EBUSY; - goto err2; + goto err0; } /* Setup clocks */ - sdd->clk = clk_get(&pdev->dev, "spi"); + sdd->clk = devm_clk_get(&pdev->dev, "spi"); if (IS_ERR(sdd->clk)) { dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n"); ret = PTR_ERR(sdd->clk); - goto err3; + goto err1; } if (clk_prepare_enable(sdd->clk)) { dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n"); ret = -EBUSY; - goto err4; + goto err1; } sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr); - sdd->src_clk = clk_get(&pdev->dev, clk_name); + sdd->src_clk = devm_clk_get(&pdev->dev, clk_name); if (IS_ERR(sdd->src_clk)) { dev_err(&pdev->dev, "Unable to acquire clock '%s'\n", clk_name); ret = PTR_ERR(sdd->src_clk); - goto err5; + goto err2; } if (clk_prepare_enable(sdd->src_clk)) { dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name); ret = -EBUSY; - goto err6; + goto err2; } /* Setup Deufult Mode */ @@ -1328,11 +1292,12 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) init_completion(&sdd->xfer_completion); INIT_LIST_HEAD(&sdd->queue); - ret = request_irq(irq, s3c64xx_spi_irq, 0, "spi-s3c64xx", sdd); + ret = devm_request_irq(&pdev->dev, irq, s3c64xx_spi_irq, 0, + "spi-s3c64xx", sdd); if (ret != 0) { dev_err(&pdev->dev, "Failed to request IRQ %d: %d\n", irq, ret); - goto err7; + goto err3; } writel(S3C64XX_SPI_INT_RX_OVERRUN_EN | S3C64XX_SPI_INT_RX_UNDERRUN_EN | @@ -1342,11 +1307,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) if (spi_register_master(master)) { dev_err(&pdev->dev, "cannot register SPI master\n"); ret = -EBUSY; - goto err8; + goto err3; } - dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d " - "with %d Slaves attached\n", + dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n", sdd->port_id, master->num_chipselect); dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n", mem_res->end, mem_res->start, @@ -1356,21 +1320,13 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) return 0; -err8: - free_irq(irq, sdd); -err7: +err3: clk_disable_unprepare(sdd->src_clk); -err6: - clk_put(sdd->src_clk); -err5: +err2: clk_disable_unprepare(sdd->clk); -err4: - clk_put(sdd->clk); -err3: +err1: if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node) s3c64xx_spi_dt_gpio_free(sdd); -err2: -err1: err0: platform_set_drvdata(pdev, NULL); spi_master_put(master); @@ -1389,13 +1345,9 @@ static int s3c64xx_spi_remove(struct platform_device *pdev) writel(0, sdd->regs + S3C64XX_SPI_INT_EN); - free_irq(platform_get_irq(pdev, 0), sdd); - clk_disable_unprepare(sdd->src_clk); - clk_put(sdd->src_clk); clk_disable_unprepare(sdd->clk); - clk_put(sdd->clk); if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node) s3c64xx_spi_dt_gpio_free(sdd); diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 96358d0eabb7..8b40d0884f8b 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -20,6 +20,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> @@ -592,6 +593,37 @@ static u32 sh_msiof_spi_txrx_word(struct spi_device *spi, unsigned nsecs, return 0; } +#ifdef CONFIG_OF +static struct sh_msiof_spi_info *sh_msiof_spi_parse_dt(struct device *dev) +{ + struct sh_msiof_spi_info *info; + struct device_node *np = dev->of_node; + u32 num_cs = 0; + + info = devm_kzalloc(dev, sizeof(struct sh_msiof_spi_info), GFP_KERNEL); + if (!info) { + dev_err(dev, "failed to allocate setup data\n"); + return NULL; + } + + /* Parse the MSIOF properties */ + of_property_read_u32(np, "num-cs", &num_cs); + of_property_read_u32(np, "renesas,tx-fifo-size", + &info->tx_fifo_override); + of_property_read_u32(np, "renesas,rx-fifo-size", + &info->rx_fifo_override); + + info->num_chipselect = num_cs; + + return info; +} +#else +static struct sh_msiof_spi_info *sh_msiof_spi_parse_dt(struct device *dev) +{ + return NULL; +} +#endif + static int sh_msiof_spi_probe(struct platform_device *pdev) { struct resource *r; @@ -610,7 +642,17 @@ static int sh_msiof_spi_probe(struct platform_device *pdev) p = spi_master_get_devdata(master); platform_set_drvdata(pdev, p); - p->info = pdev->dev.platform_data; + if (pdev->dev.of_node) + p->info = sh_msiof_spi_parse_dt(&pdev->dev); + else + p->info = pdev->dev.platform_data; + + if (!p->info) { + dev_err(&pdev->dev, "failed to obtain device info\n"); + ret = -ENXIO; + goto err1; + } + init_completion(&p->done); p->clk = clk_get(&pdev->dev, NULL); @@ -715,6 +757,17 @@ static int sh_msiof_spi_runtime_nop(struct device *dev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id sh_msiof_match[] = { + { .compatible = "renesas,sh-msiof", }, + { .compatible = "renesas,sh-mobile-msiof", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sh_msiof_match); +#else +#define sh_msiof_match NULL +#endif + static struct dev_pm_ops sh_msiof_spi_dev_pm_ops = { .runtime_suspend = sh_msiof_spi_runtime_nop, .runtime_resume = sh_msiof_spi_runtime_nop, @@ -727,6 +780,7 @@ static struct platform_driver sh_msiof_spi_drv = { .name = "spi_sh_msiof", .owner = THIS_MODULE, .pm = &sh_msiof_spi_dev_pm_ops, + .of_match_table = sh_msiof_match, }, }; module_platform_driver(sh_msiof_spi_drv); diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index e0f43a512e84..f59d4177b419 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -382,8 +382,7 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) sspi = spi_master_get_devdata(spi->master); - bits_per_word = t && t->bits_per_word ? t->bits_per_word : - spi->bits_per_word; + bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word; hz = t && t->speed_hz ? t->speed_hz : spi->max_speed_hz; /* Enable IO mode for RX, TX */ @@ -535,10 +534,9 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) } } - sspi->base = devm_request_and_ioremap(&pdev->dev, mem_res); - if (!sspi->base) { - dev_err(&pdev->dev, "IO remap failed!\n"); - ret = -ENOMEM; + sspi->base = devm_ioremap_resource(&pdev->dev, mem_res); + if (IS_ERR(sspi->base)) { + ret = PTR_ERR(sspi->base); goto free_master; } @@ -570,7 +568,7 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) ret = -EINVAL; goto free_pin; } - clk_enable(sspi->clk); + clk_prepare_enable(sspi->clk); sspi->ctrl_freq = clk_get_rate(sspi->clk); init_completion(&sspi->done); @@ -594,7 +592,7 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) return 0; free_clk: - clk_disable(sspi->clk); + clk_disable_unprepare(sspi->clk); clk_put(sspi->clk); free_pin: pinctrl_put(sspi->p); @@ -618,7 +616,7 @@ static int spi_sirfsoc_remove(struct platform_device *pdev) if (sspi->chipselect[i] > 0) gpio_free(sspi->chipselect[i]); } - clk_disable(sspi->clk); + clk_disable_unprepare(sspi->clk); clk_put(sspi->clk); pinctrl_put(sspi->p); spi_master_put(master); @@ -659,6 +657,7 @@ static const struct dev_pm_ops spi_sirfsoc_pm_ops = { static const struct of_device_id spi_sirfsoc_of_match[] = { { .compatible = "sirf,prima2-spi", }, + { .compatible = "sirf,marco-spi", }, {} }; MODULE_DEVICE_TABLE(of, sirfsoc_spi_of_match); diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c index e5dce91b74ca..3d6a12b2af04 100644 --- a/drivers/spi/spi-tegra20-sflash.c +++ b/drivers/spi/spi-tegra20-sflash.c @@ -269,9 +269,7 @@ static int tegra_sflash_start_transfer_one(struct spi_device *spi, u32 speed; unsigned long command; - speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz; - if (!speed) - speed = tsd->spi_max_frequency; + speed = t->speed_hz; if (speed != tsd->cur_speed) { clk_set_rate(tsd->clk, speed); tsd->cur_speed = speed; @@ -319,6 +317,15 @@ static int tegra_sflash_start_transfer_one(struct spi_device *spi, return tegra_sflash_start_cpu_based_transfer(tsd, t); } +static int tegra_sflash_setup(struct spi_device *spi) +{ + struct tegra_sflash_data *tsd = spi_master_get_devdata(spi->master); + + /* Set speed to the spi max fequency if spi device has not set */ + spi->max_speed_hz = spi->max_speed_hz ? : tsd->spi_max_frequency; + return 0; +} + static int tegra_sflash_transfer_one_message(struct spi_master *master, struct spi_message *msg) { @@ -492,6 +499,7 @@ static int tegra_sflash_probe(struct platform_device *pdev) /* the spi->mode bits understood by this driver: */ master->mode_bits = SPI_CPOL | SPI_CPHA; + master->setup = tegra_sflash_setup; master->transfer_one_message = tegra_sflash_transfer_one_message; master->num_chipselect = MAX_CHIP_SELECT; master->bus_num = -1; @@ -508,11 +516,9 @@ static int tegra_sflash_probe(struct platform_device *pdev) ret = -ENODEV; goto exit_free_master; } - tsd->base = devm_request_and_ioremap(&pdev->dev, r); - if (!tsd->base) { - dev_err(&pdev->dev, - "Cannot request memregion/iomap dma address\n"); - ret = -EADDRNOTAVAIL; + tsd->base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(tsd->base)) { + ret = PTR_ERR(tsd->base); goto exit_free_master; } diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index e255e7a35678..b8698b389ef3 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -284,8 +284,7 @@ static unsigned tegra_slink_calculate_curr_xfer_param( unsigned max_len; unsigned total_fifo_words; - bits_per_word = t->bits_per_word ? t->bits_per_word : - spi->bits_per_word; + bits_per_word = t->bits_per_word; tspi->bytes_per_word = (bits_per_word - 1) / 8 + 1; if (bits_per_word == 8 || bits_per_word == 16) { @@ -378,8 +377,7 @@ static unsigned int tegra_slink_read_rx_fifo_to_client_rxbuf( } else { unsigned int bits_per_word; - bits_per_word = t->bits_per_word ? t->bits_per_word : - tspi->cur_spi->bits_per_word; + bits_per_word = t->bits_per_word; for (count = 0; count < rx_full_count; count++) { x = tegra_slink_readl(tspi, SLINK_RX_FIFO); for (i = 0; (i < tspi->bytes_per_word); i++) @@ -444,8 +442,7 @@ static void tegra_slink_copy_spi_rxbuf_to_client_rxbuf( unsigned int x; unsigned int rx_mask, bits_per_word; - bits_per_word = t->bits_per_word ? t->bits_per_word : - tspi->cur_spi->bits_per_word; + bits_per_word = t->bits_per_word; rx_mask = (1 << bits_per_word) - 1; for (count = 0; count < tspi->curr_dma_words; count++) { x = tspi->rx_dma_buf[count]; @@ -728,9 +725,7 @@ static int tegra_slink_start_transfer_one(struct spi_device *spi, unsigned long command2; bits_per_word = t->bits_per_word; - speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz; - if (!speed) - speed = tspi->spi_max_frequency; + speed = t->speed_hz; if (speed != tspi->cur_speed) { clk_set_rate(tspi->clk, speed * 4); tspi->cur_speed = speed; @@ -841,6 +836,8 @@ static int tegra_slink_setup(struct spi_device *spi) BUG_ON(spi->chip_select >= MAX_CHIP_SELECT); + /* Set speed to the spi max fequency if spi device has not set */ + spi->max_speed_hz = spi->max_speed_hz ? : tspi->spi_max_frequency; ret = pm_runtime_get_sync(tspi->dev); if (ret < 0) { dev_err(tspi->dev, "pm runtime failed, e = %d\n", ret); @@ -1172,11 +1169,9 @@ static int tegra_slink_probe(struct platform_device *pdev) goto exit_free_master; } tspi->phys = r->start; - tspi->base = devm_request_and_ioremap(&pdev->dev, r); - if (!tspi->base) { - dev_err(&pdev->dev, - "Cannot request memregion/iomap dma address\n"); - ret = -EADDRNOTAVAIL; + tspi->base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(tspi->base)) { + ret = PTR_ERR(tspi->base); goto exit_free_master; } diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c index d5a3cbb646cb..adb853047926 100644 --- a/drivers/spi/spi-txx9.c +++ b/drivers/spi/spi-txx9.c @@ -189,9 +189,8 @@ static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m) unsigned int len = t->len; unsigned int wsize; u32 speed_hz = t->speed_hz ? : spi->max_speed_hz; - u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word; + u8 bits_per_word = t->bits_per_word; - bits_per_word = bits_per_word ? : 8; wsize = bits_per_word >> 3; /* in bytes */ if (prev_speed_hz != speed_hz @@ -316,9 +315,8 @@ static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m) /* check each transfer's parameters */ list_for_each_entry (t, &m->transfers, transfer_list) { u32 speed_hz = t->speed_hz ? : spi->max_speed_hz; - u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word; + u8 bits_per_word = t->bits_per_word; - bits_per_word = bits_per_word ? : 8; if (!t->tx_buf && !t->rx_buf && t->len) return -EINVAL; if (bits_per_word != 8 && bits_per_word != 16) @@ -337,7 +335,7 @@ static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m) return 0; } -static int __init txx9spi_probe(struct platform_device *dev) +static int txx9spi_probe(struct platform_device *dev) { struct spi_master *master; struct txx9spi *c; @@ -432,7 +430,7 @@ exit: return ret; } -static int __exit txx9spi_remove(struct platform_device *dev) +static int txx9spi_remove(struct platform_device *dev) { struct spi_master *master = spi_master_get(platform_get_drvdata(dev)); struct txx9spi *c = spi_master_get_devdata(master); @@ -450,7 +448,7 @@ static int __exit txx9spi_remove(struct platform_device *dev) MODULE_ALIAS("platform:spi_txx9"); static struct platform_driver txx9spi_driver = { - .remove = __exit_p(txx9spi_remove), + .remove = txx9spi_remove, .driver = { .name = "spi_txx9", .owner = THIS_MODULE, diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 19ee901577da..f996c600eb8c 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -33,7 +33,7 @@ #include <linux/of_gpio.h> #include <linux/pm_runtime.h> #include <linux/export.h> -#include <linux/sched.h> +#include <linux/sched/rt.h> #include <linux/delay.h> #include <linux/kthread.h> #include <linux/ioport.h> @@ -1059,15 +1059,14 @@ EXPORT_SYMBOL_GPL(spi_alloc_master); #ifdef CONFIG_OF static int of_spi_register_master(struct spi_master *master) { - u16 nb; - int i, *cs; + int nb, i, *cs; struct device_node *np = master->dev.of_node; if (!np) return 0; nb = of_gpio_named_count(np, "cs-gpios"); - master->num_chipselect = max(nb, master->num_chipselect); + master->num_chipselect = max(nb, (int)master->num_chipselect); if (nb < 1) return 0; @@ -1080,7 +1079,8 @@ static int of_spi_register_master(struct spi_master *master) if (!master->cs_gpios) return -ENOMEM; - memset(cs, -EINVAL, master->num_chipselect); + for (i = 0; i < master->num_chipselect; i++) + cs[i] = -EINVAL; for (i = 0; i < nb; i++) cs[i] = of_get_named_gpio(np, "cs-gpios", i); @@ -1135,6 +1135,9 @@ int spi_register_master(struct spi_master *master) if (master->num_chipselect == 0) return -EINVAL; + if ((master->bus_num < 0) && master->dev.of_node) + master->bus_num = of_alias_get_id(master->dev.of_node, "spi"); + /* convention: dynamically assigned bus IDs count down from the max */ if (master->bus_num < 0) { /* FIXME switch to an IDR based scheme, something like @@ -1248,10 +1251,10 @@ int spi_master_resume(struct spi_master *master) } EXPORT_SYMBOL_GPL(spi_master_resume); -static int __spi_master_match(struct device *dev, void *data) +static int __spi_master_match(struct device *dev, const void *data) { struct spi_master *m; - u16 *bus_num = data; + const u16 *bus_num = data; m = container_of(dev, struct spi_master, dev); return m->bus_num == *bus_num; @@ -1366,12 +1369,14 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message) } /** - * Set transfer bits_per_word as spi device default if it is not - * set for this transfer. + * Set transfer bits_per_word and max speed as spi device default if + * it is not set for this transfer. */ list_for_each_entry(xfer, &message->transfers, transfer_list) { if (!xfer->bits_per_word) xfer->bits_per_word = spi->bits_per_word; + if (!xfer->speed_hz) + xfer->speed_hz = spi->max_speed_hz; } message->spi = spi; @@ -1656,7 +1661,8 @@ int spi_write_then_read(struct spi_device *spi, * using the pre-allocated buffer or the transfer is too large. */ if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) { - local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx), GFP_KERNEL); + local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx), + GFP_KERNEL | GFP_DMA); if (!local_buf) return -ENOMEM; } else { |