summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig20
-rw-r--r--drivers/spi/spi-ath79.c1
-rw-r--r--drivers/spi/spi-atmel.c5
-rw-r--r--drivers/spi/spi-gpio.c4
-rw-r--r--drivers/spi/spi-nuc900.c3
-rw-r--r--drivers/spi/spi-omap2-mcspi.c51
-rw-r--r--drivers/spi/spi-pl022.c151
-rw-r--r--drivers/spi/spi-s3c64xx.c14
-rw-r--r--drivers/spi/spi-topcliff-pch.c13
-rw-r--r--drivers/spi/spi.c2
10 files changed, 158 insertions, 106 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index a1fd73df5416..3f9a47ec67dc 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -87,12 +87,12 @@ config SPI_BFIN_SPORT
Enable support for a SPI bus via the Blackfin SPORT peripheral.
config SPI_AU1550
- tristate "Au1550/Au12x0 SPI Controller"
+ tristate "Au1550/Au1200/Au1300 SPI Controller"
depends on MIPS_ALCHEMY && EXPERIMENTAL
select SPI_BITBANG
help
If you say yes to this option, support will be included for the
- Au1550 SPI controller (may also work with Au1200,Au1210,Au1250).
+ PSC SPI controller found on Au1550, Au1200 and Au1300 series.
config SPI_BITBANG
tristate "Utilities for Bitbanging SPI masters"
@@ -174,8 +174,7 @@ config SPI_LM70_LLP
config SPI_MPC52xx
tristate "Freescale MPC52xx SPI (non-PSC) controller support"
- depends on PPC_MPC52xx && SPI
- select SPI_MASTER_OF
+ depends on PPC_MPC52xx
help
This drivers supports the MPC52xx SPI controller in master SPI
mode.
@@ -199,7 +198,7 @@ config SPI_FSL_LIB
depends on FSL_SOC
config SPI_FSL_SPI
- tristate "Freescale SPI controller"
+ bool "Freescale SPI controller"
depends on FSL_SOC
select SPI_FSL_LIB
help
@@ -208,7 +207,7 @@ config SPI_FSL_SPI
MPC8569 uses the controller in QE mode, MPC8610 in cpu mode.
config SPI_FSL_ESPI
- tristate "Freescale eSPI controller"
+ bool "Freescale eSPI controller"
depends on FSL_SOC
select SPI_FSL_LIB
help
@@ -333,8 +332,7 @@ config SPI_STMP3XXX
config SPI_TEGRA
tristate "Nvidia Tegra SPI controller"
- depends on ARCH_TEGRA
- select TEGRA_SYSTEM_DMA
+ depends on ARCH_TEGRA && TEGRA_SYSTEM_DMA
help
SPI driver for NVidia Tegra SoCs
@@ -346,14 +344,14 @@ config SPI_TI_SSP
serial port.
config SPI_TOPCLIFF_PCH
- tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH SPI controller"
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI"
depends on PCI
help
SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
used in some x86 embedded processors.
- This driver also supports the ML7213, a companion chip for the
- Atom E6xx series and compatible with the Intel EG20T PCH.
+ This driver also supports the ML7213/ML7223/ML7831, a companion chip
+ for the Atom E6xx series and compatible with the Intel EG20T PCH.
config SPI_TXX9
tristate "Toshiba TXx9 SPI controller"
diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index 024b48aed5ca..acc88b4d2869 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -13,6 +13,7 @@
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 79665e2e6ec5..16d6a839c7fa 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -907,7 +907,7 @@ static void atmel_spi_cleanup(struct spi_device *spi)
/*-------------------------------------------------------------------------*/
-static int __init atmel_spi_probe(struct platform_device *pdev)
+static int __devinit atmel_spi_probe(struct platform_device *pdev)
{
struct resource *regs;
int irq;
@@ -1003,7 +1003,7 @@ out_free:
return ret;
}
-static int __exit atmel_spi_remove(struct platform_device *pdev)
+static int __devexit atmel_spi_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct atmel_spi *as = spi_master_get_devdata(master);
@@ -1072,6 +1072,7 @@ static struct platform_driver atmel_spi_driver = {
},
.suspend = atmel_spi_suspend,
.resume = atmel_spi_resume,
+ .probe = atmel_spi_probe,
.remove = __exit_p(atmel_spi_remove),
};
module_platform_driver(atmel_spi_driver);
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index e093d3ec41ba..0094c645ff0d 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -256,7 +256,7 @@ static void spi_gpio_cleanup(struct spi_device *spi)
spi_bitbang_cleanup(spi);
}
-static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
+static int __devinit spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
{
int value;
@@ -270,7 +270,7 @@ static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
return value;
}
-static int __init
+static int __devinit
spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label,
u16 *res_flags)
{
diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c
index e763254741c2..182e9c873822 100644
--- a/drivers/spi/spi-nuc900.c
+++ b/drivers/spi/spi-nuc900.c
@@ -8,6 +8,7 @@
*
*/
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
@@ -426,7 +427,7 @@ static int __devinit nuc900_spi_probe(struct platform_device *pdev)
goto err_clk;
}
- mfp_set_groupg(&pdev->dev);
+ mfp_set_groupg(&pdev->dev, NULL);
nuc900_init_spi(hw);
err = spi_bitbang_start(&hw->bitbang);
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 322be7aea8b4..0b0dfb71c640 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -121,6 +121,7 @@ struct omap2_mcspi {
/* SPI1 has 4 channels, while SPI2 has 2 */
struct omap2_mcspi_dma *dma_channels;
struct device *dev;
+ struct workqueue_struct *wq;
};
struct omap2_mcspi_cs {
@@ -143,8 +144,6 @@ struct omap2_mcspi_regs {
static struct omap2_mcspi_regs omap2_mcspi_ctx[OMAP2_MCSPI_MAX_CTRL];
-static struct workqueue_struct *omap2_mcspi_wq;
-
#define MOD_REG_BIT(val, mask, set) do { \
if (set) \
val |= mask; \
@@ -1043,7 +1042,7 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m)
spin_lock_irqsave(&mcspi->lock, flags);
list_add_tail(&m->queue, &mcspi->msg_queue);
- queue_work(omap2_mcspi_wq, &mcspi->work);
+ queue_work(mcspi->wq, &mcspi->work);
spin_unlock_irqrestore(&mcspi->lock, flags);
return 0;
@@ -1088,6 +1087,7 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
struct omap2_mcspi *mcspi;
struct resource *r;
int status = 0, i;
+ char wq_name[20];
master = spi_alloc_master(&pdev->dev, sizeof *mcspi);
if (master == NULL) {
@@ -1111,10 +1111,17 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
mcspi = spi_master_get_devdata(master);
mcspi->master = master;
+ sprintf(wq_name, "omap2_mcspi/%d", master->bus_num);
+ mcspi->wq = alloc_workqueue(wq_name, WQ_MEM_RECLAIM, 1);
+ if (mcspi->wq == NULL) {
+ status = -ENOMEM;
+ goto free_master;
+ }
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
status = -ENODEV;
- goto err1;
+ goto free_master;
}
r->start += pdata->regs_offset;
@@ -1123,14 +1130,14 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
if (!request_mem_region(r->start, resource_size(r),
dev_name(&pdev->dev))) {
status = -EBUSY;
- goto err1;
+ goto free_master;
}
mcspi->base = ioremap(r->start, resource_size(r));
if (!mcspi->base) {
dev_dbg(&pdev->dev, "can't ioremap MCSPI\n");
status = -ENOMEM;
- goto err2;
+ goto release_region;
}
mcspi->dev = &pdev->dev;
@@ -1145,7 +1152,7 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
GFP_KERNEL);
if (mcspi->dma_channels == NULL)
- goto err2;
+ goto unmap_io;
for (i = 0; i < master->num_chipselect; i++) {
char dma_ch_name[14];
@@ -1175,25 +1182,33 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
mcspi->dma_channels[i].dma_tx_sync_dev = dma_res->start;
}
+ if (status < 0)
+ goto dma_chnl_free;
+
pm_runtime_enable(&pdev->dev);
if (status || omap2_mcspi_master_setup(mcspi) < 0)
- goto err3;
+ goto disable_pm;
status = spi_register_master(master);
if (status < 0)
- goto err4;
+ goto err_spi_register;
return status;
-err4:
+err_spi_register:
spi_master_put(master);
-err3:
+disable_pm:
+ pm_runtime_disable(&pdev->dev);
+dma_chnl_free:
kfree(mcspi->dma_channels);
-err2:
- release_mem_region(r->start, resource_size(r));
+unmap_io:
iounmap(mcspi->base);
-err1:
+release_region:
+ release_mem_region(r->start, resource_size(r));
+free_master:
+ kfree(master);
+ platform_set_drvdata(pdev, NULL);
return status;
}
@@ -1210,6 +1225,7 @@ static int __exit omap2_mcspi_remove(struct platform_device *pdev)
dma_channels = mcspi->dma_channels;
omap2_mcspi_disable_clocks(mcspi);
+ pm_runtime_disable(&pdev->dev);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(r->start, resource_size(r));
@@ -1217,6 +1233,8 @@ static int __exit omap2_mcspi_remove(struct platform_device *pdev)
spi_unregister_master(master);
iounmap(base);
kfree(dma_channels);
+ destroy_workqueue(mcspi->wq);
+ platform_set_drvdata(pdev, NULL);
return 0;
}
@@ -1275,10 +1293,6 @@ static struct platform_driver omap2_mcspi_driver = {
static int __init omap2_mcspi_init(void)
{
- omap2_mcspi_wq = create_singlethread_workqueue(
- omap2_mcspi_driver.driver.name);
- if (omap2_mcspi_wq == NULL)
- return -1;
return platform_driver_probe(&omap2_mcspi_driver, omap2_mcspi_probe);
}
subsys_initcall(omap2_mcspi_init);
@@ -1287,7 +1301,6 @@ static void __exit omap2_mcspi_exit(void)
{
platform_driver_unregister(&omap2_mcspi_driver);
- destroy_workqueue(omap2_mcspi_wq);
}
module_exit(omap2_mcspi_exit);
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 95400fa99d90..2f9cb43a2398 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -340,6 +340,10 @@ struct vendor_data {
* @cur_msg: Pointer to current spi_message being processed
* @cur_transfer: Pointer to current spi_transfer
* @cur_chip: pointer to current clients chip(assigned from controller_state)
+ * @next_msg_cs_active: the next message in the queue has been examined
+ * and it was found that it uses the same chip select as the previous
+ * message, so we left it active after the previous transfer, and it's
+ * active already.
* @tx: current position in TX buffer to be read
* @tx_end: end position in TX buffer to be read
* @rx: current position in RX buffer to be written
@@ -373,6 +377,7 @@ struct pl022 {
struct spi_message *cur_msg;
struct spi_transfer *cur_transfer;
struct chip_data *cur_chip;
+ bool next_msg_cs_active;
void *tx;
void *tx_end;
void *rx;
@@ -445,23 +450,9 @@ static void giveback(struct pl022 *pl022)
struct spi_transfer *last_transfer;
unsigned long flags;
struct spi_message *msg;
- void (*curr_cs_control) (u32 command);
+ pl022->next_msg_cs_active = false;
- /*
- * This local reference to the chip select function
- * is needed because we set curr_chip to NULL
- * as a step toward termininating the message.
- */
- curr_cs_control = pl022->cur_chip->cs_control;
- spin_lock_irqsave(&pl022->queue_lock, flags);
- msg = pl022->cur_msg;
- pl022->cur_msg = NULL;
- pl022->cur_transfer = NULL;
- pl022->cur_chip = NULL;
- queue_work(pl022->workqueue, &pl022->pump_messages);
- spin_unlock_irqrestore(&pl022->queue_lock, flags);
-
- last_transfer = list_entry(msg->transfers.prev,
+ last_transfer = list_entry(pl022->cur_msg->transfers.prev,
struct spi_transfer,
transfer_list);
@@ -473,18 +464,13 @@ static void giveback(struct pl022 *pl022)
*/
udelay(last_transfer->delay_usecs);
- /*
- * Drop chip select UNLESS cs_change is true or we are returning
- * a message with an error, or next message is for another chip
- */
- if (!last_transfer->cs_change)
- curr_cs_control(SSP_CHIP_DESELECT);
- else {
+ if (!last_transfer->cs_change) {
struct spi_message *next_msg;
- /* Holding of cs was hinted, but we need to make sure
- * the next message is for the same chip. Don't waste
- * time with the following tests unless this was hinted.
+ /*
+ * cs_change was not set. We can keep the chip select
+ * enabled if there is message in the queue and it is
+ * for the same spi device.
*
* We cannot postpone this until pump_messages, because
* after calling msg->complete (below) the driver that
@@ -501,19 +487,29 @@ static void giveback(struct pl022 *pl022)
struct spi_message, queue);
spin_unlock_irqrestore(&pl022->queue_lock, flags);
- /* see if the next and current messages point
- * to the same chip
+ /*
+ * see if the next and current messages point
+ * to the same spi device.
*/
- if (next_msg && next_msg->spi != msg->spi)
+ if (next_msg && next_msg->spi != pl022->cur_msg->spi)
next_msg = NULL;
- if (!next_msg || msg->state == STATE_ERROR)
- curr_cs_control(SSP_CHIP_DESELECT);
+ if (!next_msg || pl022->cur_msg->state == STATE_ERROR)
+ pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
+ else
+ pl022->next_msg_cs_active = true;
}
+
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+ msg = pl022->cur_msg;
+ pl022->cur_msg = NULL;
+ pl022->cur_transfer = NULL;
+ pl022->cur_chip = NULL;
+ queue_work(pl022->workqueue, &pl022->pump_messages);
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
msg->state = NULL;
if (msg->complete)
msg->complete(msg->context);
- /* This message is completed, so let's turn off the clocks & power */
- pm_runtime_put(&pl022->adev->dev);
}
/**
@@ -1244,9 +1240,9 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
if ((pl022->tx == pl022->tx_end) && (flag == 0)) {
flag = 1;
- /* Disable Transmit interrupt */
- writew(readw(SSP_IMSC(pl022->virtbase)) &
- (~SSP_IMSC_MASK_TXIM),
+ /* Disable Transmit interrupt, enable receive interrupt */
+ writew((readw(SSP_IMSC(pl022->virtbase)) &
+ ~SSP_IMSC_MASK_TXIM) | SSP_IMSC_MASK_RXIM,
SSP_IMSC(pl022->virtbase));
}
@@ -1352,7 +1348,7 @@ static void pump_transfers(unsigned long data)
*/
udelay(previous->delay_usecs);
- /* Drop chip select only if cs_change is requested */
+ /* Reselect chip select only if cs_change was requested */
if (previous->cs_change)
pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
} else {
@@ -1379,15 +1375,22 @@ static void pump_transfers(unsigned long data)
}
err_config_dma:
- writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+ /* enable all interrupts except RX */
+ writew(ENABLE_ALL_INTERRUPTS & ~SSP_IMSC_MASK_RXIM, SSP_IMSC(pl022->virtbase));
}
static void do_interrupt_dma_transfer(struct pl022 *pl022)
{
- u32 irqflags = ENABLE_ALL_INTERRUPTS;
+ /*
+ * Default is to enable all interrupts except RX -
+ * this will be enabled once TX is complete
+ */
+ u32 irqflags = ENABLE_ALL_INTERRUPTS & ~SSP_IMSC_MASK_RXIM;
+
+ /* Enable target chip, if not already active */
+ if (!pl022->next_msg_cs_active)
+ pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
- /* Enable target chip */
- pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
/* Error path */
pl022->cur_msg->state = STATE_ERROR;
@@ -1442,7 +1445,8 @@ static void do_polling_transfer(struct pl022 *pl022)
} else {
/* STATE_START */
message->state = STATE_RUNNING;
- pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ if (!pl022->next_msg_cs_active)
+ pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
}
/* Configuration Changing Per Transfer */
@@ -1504,14 +1508,28 @@ static void pump_messages(struct work_struct *work)
struct pl022 *pl022 =
container_of(work, struct pl022, pump_messages);
unsigned long flags;
+ bool was_busy = false;
/* Lock queue and check for queue work */
spin_lock_irqsave(&pl022->queue_lock, flags);
if (list_empty(&pl022->queue) || !pl022->running) {
+ if (pl022->busy) {
+ /* nothing more to do - disable spi/ssp and power off */
+ writew((readw(SSP_CR1(pl022->virtbase)) &
+ (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+
+ if (pl022->master_info->autosuspend_delay > 0) {
+ pm_runtime_mark_last_busy(&pl022->adev->dev);
+ pm_runtime_put_autosuspend(&pl022->adev->dev);
+ } else {
+ pm_runtime_put(&pl022->adev->dev);
+ }
+ }
pl022->busy = false;
spin_unlock_irqrestore(&pl022->queue_lock, flags);
return;
}
+
/* Make sure we are not already running a message */
if (pl022->cur_msg) {
spin_unlock_irqrestore(&pl022->queue_lock, flags);
@@ -1522,7 +1540,10 @@ static void pump_messages(struct work_struct *work)
list_entry(pl022->queue.next, struct spi_message, queue);
list_del_init(&pl022->cur_msg->queue);
- pl022->busy = true;
+ if (pl022->busy)
+ was_busy = true;
+ else
+ pl022->busy = true;
spin_unlock_irqrestore(&pl022->queue_lock, flags);
/* Initial message state */
@@ -1532,12 +1553,14 @@ static void pump_messages(struct work_struct *work)
/* Setup the SPI using the per chip configuration */
pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
- /*
- * We enable the core voltage and clocks here, then the clocks
- * and core will be disabled when giveback() is called in each method
- * (poll/interrupt/DMA)
- */
- pm_runtime_get_sync(&pl022->adev->dev);
+ if (!was_busy)
+ /*
+ * We enable the core voltage and clocks here, then the clocks
+ * and core will be disabled when this workqueue is run again
+ * and there is no more work to be done.
+ */
+ pm_runtime_get_sync(&pl022->adev->dev);
+
restore_state(pl022);
flush(pl022);
@@ -1582,6 +1605,7 @@ static int start_queue(struct pl022 *pl022)
pl022->cur_msg = NULL;
pl022->cur_transfer = NULL;
pl022->cur_chip = NULL;
+ pl022->next_msg_cs_active = false;
spin_unlock_irqrestore(&pl022->queue_lock, flags);
queue_work(pl022->workqueue, &pl022->pump_messages);
@@ -1881,7 +1905,7 @@ static int pl022_setup(struct spi_device *spi)
{
struct pl022_config_chip const *chip_info;
struct chip_data *chip;
- struct ssp_clock_params clk_freq = {0, };
+ struct ssp_clock_params clk_freq = { .cpsdvsr = 0, .scr = 0};
int status = 0;
struct pl022 *pl022 = spi_master_get_devdata(spi->master);
unsigned int bits = spi->bits_per_word;
@@ -2184,6 +2208,12 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
goto err_clk_prep;
}
+ status = clk_enable(pl022->clk);
+ if (status) {
+ dev_err(&adev->dev, "could not enable SSP/SPI bus clock\n");
+ goto err_no_clk_en;
+ }
+
/* Disable SSP */
writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
SSP_CR1(pl022->virtbase));
@@ -2225,7 +2255,17 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
dev_dbg(dev, "probe succeeded\n");
/* let runtime pm put suspend */
- pm_runtime_put(dev);
+ if (platform_info->autosuspend_delay > 0) {
+ dev_info(&adev->dev,
+ "will use autosuspend for runtime pm, delay %dms\n",
+ platform_info->autosuspend_delay);
+ pm_runtime_set_autosuspend_delay(dev,
+ platform_info->autosuspend_delay);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_put_autosuspend(dev);
+ } else {
+ pm_runtime_put(dev);
+ }
return 0;
err_spi_register:
@@ -2237,6 +2277,8 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
free_irq(adev->irq[0], pl022);
err_no_irq:
+ clk_disable(pl022->clk);
+ err_no_clk_en:
clk_unprepare(pl022->clk);
err_clk_prep:
clk_put(pl022->clk);
@@ -2297,11 +2339,6 @@ static int pl022_suspend(struct device *dev)
return status;
}
- amba_vcore_enable(pl022->adev);
- amba_pclk_enable(pl022->adev);
- load_ssp_default_config(pl022);
- amba_pclk_disable(pl022->adev);
- amba_vcore_disable(pl022->adev);
dev_dbg(dev, "suspended\n");
return 0;
}
@@ -2424,6 +2461,8 @@ static struct amba_id pl022_ids[] = {
{ 0, 0 },
};
+MODULE_DEVICE_TABLE(amba, pl022_ids);
+
static struct amba_driver pl022_driver = {
.drv = {
.name = "ssp-pl022",
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 019a7163572f..dcf7e1006426 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -971,6 +971,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
struct s3c64xx_spi_info *sci;
struct spi_master *master;
int ret;
+ char clk_name[16];
if (pdev->id < 0) {
dev_err(&pdev->dev,
@@ -984,11 +985,6 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
}
sci = pdev->dev.platform_data;
- if (!sci->src_clk_name) {
- dev_err(&pdev->dev,
- "Board init must call s3c64xx_spi_set_info()\n");
- return -EINVAL;
- }
/* Check for availability of necessary resource */
@@ -1073,17 +1069,17 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
goto err4;
}
- sdd->src_clk = clk_get(&pdev->dev, sci->src_clk_name);
+ sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr);
+ sdd->src_clk = clk_get(&pdev->dev, clk_name);
if (IS_ERR(sdd->src_clk)) {
dev_err(&pdev->dev,
- "Unable to acquire clock '%s'\n", sci->src_clk_name);
+ "Unable to acquire clock '%s'\n", clk_name);
ret = PTR_ERR(sdd->src_clk);
goto err5;
}
if (clk_enable(sdd->src_clk)) {
- dev_err(&pdev->dev, "Couldn't enable clock '%s'\n",
- sci->src_clk_name);
+ dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name);
ret = -EBUSY;
goto err6;
}
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index 99ec279bc46d..2a6429d8c363 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -1,7 +1,7 @@
/*
* SPI bus driver for the Topcliff PCH used by Intel SoCs
*
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -95,16 +95,18 @@
#define PCH_CLOCK_HZ 50000000
#define PCH_MAX_SPBR 1023
-/* Definition for ML7213 by OKI SEMICONDUCTOR */
+/* Definition for ML7213/ML7223/ML7831 by LAPIS Semiconductor */
#define PCI_VENDOR_ID_ROHM 0x10DB
#define PCI_DEVICE_ID_ML7213_SPI 0x802c
#define PCI_DEVICE_ID_ML7223_SPI 0x800F
+#define PCI_DEVICE_ID_ML7831_SPI 0x8816
/*
* Set the number of SPI instance max
* Intel EG20T PCH : 1ch
- * OKI SEMICONDUCTOR ML7213 IOH : 2ch
- * OKI SEMICONDUCTOR ML7223 IOH : 1ch
+ * LAPIS Semiconductor ML7213 IOH : 2ch
+ * LAPIS Semiconductor ML7223 IOH : 1ch
+ * LAPIS Semiconductor ML7831 IOH : 1ch
*/
#define PCH_SPI_MAX_DEV 2
@@ -218,6 +220,7 @@ static struct pci_device_id pch_spi_pcidev_id[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_GE_SPI), 1, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_SPI), 2, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_SPI), 1, },
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_SPI), 1, },
{ }
};
@@ -1753,4 +1756,4 @@ MODULE_PARM_DESC(use_dma,
"to use DMA for data transfers pass 1 else 0; default 1");
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR ML7xxx IOH SPI Driver");
+MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semiconductor ML7xxx IOH SPI Driver");
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 77eae99af11c..b2ccdea30cb9 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -319,7 +319,7 @@ struct spi_device *spi_alloc_device(struct spi_master *master)
}
spi->master = master;
- spi->dev.parent = dev;
+ spi->dev.parent = &master->dev;
spi->dev.bus = &spi_bus_type;
spi->dev.release = spidev_release;
device_initialize(&spi->dev);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 08:32:54 +0100