summaryrefslogtreecommitdiffstats
path: root/drivers/ssb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ssb')
-rw-r--r--drivers/ssb/Kconfig21
-rw-r--r--drivers/ssb/b43_pci_bridge.c4
-rw-r--r--drivers/ssb/bridge_pcmcia_80211.c6
-rw-r--r--drivers/ssb/driver_chipcommon.c14
-rw-r--r--drivers/ssb/driver_chipcommon_pmu.c40
-rw-r--r--drivers/ssb/driver_chipcommon_sflash.c6
-rw-r--r--drivers/ssb/driver_extif.c4
-rw-r--r--drivers/ssb/driver_gige.c2
-rw-r--r--drivers/ssb/driver_gpio.c8
-rw-r--r--drivers/ssb/driver_mipscore.c17
-rw-r--r--drivers/ssb/driver_pcicore.c23
-rw-r--r--drivers/ssb/embedded.c18
-rw-r--r--drivers/ssb/host_soc.c16
-rw-r--r--drivers/ssb/main.c83
-rw-r--r--drivers/ssb/pci.c75
-rw-r--r--drivers/ssb/pcmcia.c62
-rw-r--r--drivers/ssb/scan.c38
-rw-r--r--drivers/ssb/sdio.c16
-rw-r--r--drivers/ssb/sprom.c4
-rw-r--r--drivers/ssb/ssb_private.h39
20 files changed, 215 insertions, 281 deletions
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index c574dd210500..df30e1323252 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -89,27 +89,6 @@ config SSB_HOST_SOC
If unsure, say N
-config SSB_SILENT
- bool "No SSB kernel messages"
- depends on SSB && EXPERT
- help
- This option turns off all Sonics Silicon Backplane printks.
- Note that you won't be able to identify problems, once
- messages are turned off.
- This might only be desired for production kernels on
- embedded devices to reduce the kernel size.
-
- Say N
-
-config SSB_DEBUG
- bool "SSB debugging"
- depends on SSB && !SSB_SILENT
- help
- This turns on additional runtime checks and debugging
- messages. Turn this on for SSB troubleshooting.
-
- If unsure, say N
-
config SSB_SERIAL
bool
depends on SSB
diff --git a/drivers/ssb/b43_pci_bridge.c b/drivers/ssb/b43_pci_bridge.c
index bed2fedeb057..9c7316b5685f 100644
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -10,12 +10,12 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/ssb/ssb.h>
-#include "ssb_private.h"
-
static const struct pci_device_id b43_pci_bridge_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4301) },
diff --git a/drivers/ssb/bridge_pcmcia_80211.c b/drivers/ssb/bridge_pcmcia_80211.c
index d70568ea02d5..f51f150307df 100644
--- a/drivers/ssb/bridge_pcmcia_80211.c
+++ b/drivers/ssb/bridge_pcmcia_80211.c
@@ -6,6 +6,8 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -15,8 +17,6 @@
#include <pcmcia/ds.h>
#include <pcmcia/cisreg.h>
-#include "ssb_private.h"
-
static const struct pcmcia_device_id ssb_host_pcmcia_tbl[] = {
PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448),
PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476),
@@ -70,7 +70,7 @@ err_disable:
err_kfree_ssb:
kfree(ssb);
out_error:
- ssb_err("Initialization failed (%d, %d)\n", res, err);
+ dev_err(&dev->dev, "Initialization failed (%d, %d)\n", res, err);
return err;
}
diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c
index 7cb7d2c8fd86..99a4656d113d 100644
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -9,14 +9,14 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/export.h>
#include <linux/pci.h>
#include <linux/bcm47xx_wdt.h>
-#include "ssb_private.h"
-
/* Clock sources */
enum ssb_clksrc {
@@ -56,7 +56,7 @@ void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
return; /* PMU controls clockmode, separated function needed */
- SSB_WARN_ON(ccdev->id.revision >= 20);
+ WARN_ON(ccdev->id.revision >= 20);
/* chipcommon cores prior to rev6 don't support dynamic clock control */
if (ccdev->id.revision < 6)
@@ -111,7 +111,7 @@ void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
}
break;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
}
@@ -164,7 +164,7 @@ static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
divisor = 32;
break;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
} else if (cc->dev->id.revision < 10) {
switch (clocksrc) {
@@ -277,7 +277,7 @@ static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
minfreq = chipco_pctl_clockfreqlimit(cc, 0);
pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY);
tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
- SSB_WARN_ON(tmp & ~0xFFFF);
+ WARN_ON(tmp & ~0xFFFF);
cc->fast_pwrup_delay = tmp;
}
@@ -354,7 +354,7 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc)
if (cc->dev->id.revision >= 11)
cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
- ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+ dev_dbg(cc->dev->dev, "chipcommon status is 0x%x\n", cc->status);
if (cc->dev->id.revision >= 20) {
chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c
index c5352ea4821e..0f60e90ded26 100644
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -8,6 +8,8 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/ssb/ssb_driver_chipcommon.h>
@@ -17,8 +19,6 @@
#include <linux/bcm47xx_nvram.h>
#endif
-#include "ssb_private.h"
-
static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset)
{
chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
@@ -110,7 +110,7 @@ static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
return;
}
- ssb_info("Programming PLL to %u.%03u MHz\n",
+ dev_info(cc->dev->dev, "Programming PLL to %u.%03u MHz\n",
crystalfreq / 1000, crystalfreq % 1000);
/* First turn the PLL off. */
@@ -128,7 +128,7 @@ static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
~(1 << SSB_PMURES_5354_BB_PLL_PU));
break;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
for (i = 1500; i; i--) {
tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
}
tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
- ssb_emerg("Failed to turn the PLL off!\n");
+ dev_emerg(cc->dev->dev, "Failed to turn the PLL off!\n");
/* Set PDIV in PLL control 0. */
pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
@@ -249,7 +249,7 @@ static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
return;
}
- ssb_info("Programming PLL to %u.%03u MHz\n",
+ dev_info(cc->dev->dev, "Programming PLL to %u.%03u MHz\n",
crystalfreq / 1000, crystalfreq % 1000);
/* First turn the PLL off. */
@@ -265,7 +265,7 @@ static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
buffer_strength = 0x222222;
break;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
for (i = 1500; i; i--) {
tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
}
tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
- ssb_emerg("Failed to turn the PLL off!\n");
+ dev_emerg(cc->dev->dev, "Failed to turn the PLL off!\n");
/* Set p1div and p2div. */
pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
@@ -349,7 +349,7 @@ static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
case 43222:
break;
default:
- ssb_err("ERROR: PLL init unknown for device %04X\n",
+ dev_err(cc->dev->dev, "ERROR: PLL init unknown for device %04X\n",
bus->chip_id);
}
}
@@ -471,7 +471,7 @@ static void ssb_pmu_resources_init(struct ssb_chipcommon *cc)
max_msk = 0xFFFFF;
break;
default:
- ssb_err("ERROR: PMU resource config unknown for device %04X\n",
+ dev_err(cc->dev->dev, "ERROR: PMU resource config unknown for device %04X\n",
bus->chip_id);
}
@@ -501,7 +501,7 @@ static void ssb_pmu_resources_init(struct ssb_chipcommon *cc)
~(depend_tab[i].depend));
break;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
}
}
@@ -524,7 +524,7 @@ void ssb_pmu_init(struct ssb_chipcommon *cc)
pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
- ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
+ dev_dbg(cc->dev->dev, "Found rev %u PMU (capabilities 0x%08X)\n",
cc->pmu.rev, pmucap);
if (cc->pmu.rev == 1)
@@ -568,12 +568,12 @@ void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
mask = 0x3F;
break;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
return;
}
break;
case 0x4312:
- if (SSB_WARN_ON(id != LDO_PAREF))
+ if (WARN_ON(id != LDO_PAREF))
return;
addr = 0;
shift = 21;
@@ -636,7 +636,7 @@ u32 ssb_pmu_get_alp_clock(struct ssb_chipcommon *cc)
case 0x5354:
return ssb_pmu_get_alp_clock_clk0(cc);
default:
- ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
+ dev_err(cc->dev->dev, "ERROR: PMU alp clock unknown for device %04X\n",
bus->chip_id);
return 0;
}
@@ -651,7 +651,7 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
/* 5354 chip uses a non programmable PLL of frequency 240MHz */
return 240000000;
default:
- ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
+ dev_err(cc->dev->dev, "ERROR: PMU cpu clock unknown for device %04X\n",
bus->chip_id);
return 0;
}
@@ -665,7 +665,7 @@ u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc)
case 0x5354:
return 120000000;
default:
- ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
+ dev_err(cc->dev->dev, "ERROR: PMU controlclock unknown for device %04X\n",
bus->chip_id);
return 0;
}
@@ -705,9 +705,9 @@ void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
break;
default:
- ssb_printk(KERN_ERR PFX
- "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
- cc->dev->bus->chip_id);
+ dev_err(cc->dev->dev,
+ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+ cc->dev->bus->chip_id);
return;
}
diff --git a/drivers/ssb/driver_chipcommon_sflash.c b/drivers/ssb/driver_chipcommon_sflash.c
index 937fc31971a7..fac0e6828288 100644
--- a/drivers/ssb/driver_chipcommon_sflash.c
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -5,10 +5,10 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
-#include <linux/ssb/ssb.h>
-
#include "ssb_private.h"
+#include <linux/ssb/ssb.h>
+
static struct resource ssb_sflash_resource = {
.name = "ssb_sflash",
.start = SSB_FLASH2,
@@ -80,7 +80,7 @@ static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
return;
cpu_relax();
}
- pr_err("SFLASH control command failed (timeout)!\n");
+ dev_err(cc->dev->dev, "SFLASH control command failed (timeout)!\n");
}
/* Initialize serial flash access */
diff --git a/drivers/ssb/driver_extif.c b/drivers/ssb/driver_extif.c
index 59385fdab5b0..06b68dd6e022 100644
--- a/drivers/ssb/driver_extif.c
+++ b/drivers/ssb/driver_extif.c
@@ -10,12 +10,12 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
-#include "ssb_private.h"
-
static inline u32 extif_read32(struct ssb_extif *extif, u16 offset)
{
diff --git a/drivers/ssb/driver_gige.c b/drivers/ssb/driver_gige.c
index e9734051e3c4..ebee6b0e3c34 100644
--- a/drivers/ssb/driver_gige.c
+++ b/drivers/ssb/driver_gige.c
@@ -242,7 +242,7 @@ static int ssb_gige_probe(struct ssb_device *sdev,
bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
{
if (!pdev->resource[0].name)
- return 0;
+ return false;
return (strcmp(pdev->resource[0].name, SSB_GIGE_MEM_RES_NAME) == 0);
}
EXPORT_SYMBOL(pdev_is_ssb_gige_core);
diff --git a/drivers/ssb/driver_gpio.c b/drivers/ssb/driver_gpio.c
index 796e22037bc4..e809dae4c470 100644
--- a/drivers/ssb/driver_gpio.c
+++ b/drivers/ssb/driver_gpio.c
@@ -8,6 +8,8 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/gpio/driver.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
@@ -15,8 +17,6 @@
#include <linux/export.h>
#include <linux/ssb/ssb.h>
-#include "ssb_private.h"
-
/**************************************************
* Shared
@@ -461,7 +461,7 @@ int ssb_gpio_init(struct ssb_bus *bus)
else if (ssb_extif_available(&bus->extif))
return ssb_gpio_extif_init(bus);
else
- SSB_WARN_ON(1);
+ WARN_ON(1);
return -1;
}
@@ -473,7 +473,7 @@ int ssb_gpio_unregister(struct ssb_bus *bus)
gpiochip_remove(&bus->gpio);
return 0;
} else {
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
return -1;
diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c
index f87efef42252..1ca2ac5ef2b8 100644
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -8,6 +8,8 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/ssb/ssb.h>
#include <linux/mtd/physmap.h>
@@ -19,8 +21,6 @@
#include <linux/bcm47xx_nvram.h>
#endif
-#include "ssb_private.h"
-
static const char * const part_probes[] = { "bcm47xxpart", NULL };
static struct physmap_flash_data ssb_pflash_data = {
@@ -170,14 +170,15 @@ static void set_irq(struct ssb_device *dev, unsigned int irq)
irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
ssb_write32(mdev, SSB_IPSFLAG, irqflag);
}
- ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
+ dev_dbg(dev->dev, "set_irq: core 0x%04x, irq %d => %d\n",
dev->id.coreid, oldirq+2, irq+2);
}
static void print_irq(struct ssb_device *dev, unsigned int irq)
{
static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
- ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
+ dev_dbg(dev->dev,
+ "core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
dev->id.coreid,
irq_name[0], irq == 0 ? "*" : " ",
irq_name[1], irq == 1 ? "*" : " ",
@@ -229,11 +230,11 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
case SSB_CHIPCO_FLASHT_STSER:
case SSB_CHIPCO_FLASHT_ATSER:
- pr_debug("Found serial flash\n");
+ dev_dbg(mcore->dev->dev, "Found serial flash\n");
ssb_sflash_init(&bus->chipco);
break;
case SSB_CHIPCO_FLASHT_PARA:
- pr_debug("Found parallel flash\n");
+ dev_dbg(mcore->dev->dev, "Found parallel flash\n");
pflash->present = true;
pflash->window = SSB_FLASH2;
pflash->window_size = SSB_FLASH2_SZ;
@@ -299,7 +300,7 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
if (!mcore->dev)
return; /* We don't have a MIPS core */
- ssb_dbg("Initializing MIPS core...\n");
+ dev_dbg(mcore->dev->dev, "Initializing MIPS core...\n");
bus = mcore->dev->bus;
hz = ssb_clockspeed(bus);
@@ -347,7 +348,7 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
break;
}
}
- ssb_dbg("after irq reconfiguration\n");
+ dev_dbg(mcore->dev->dev, "after irq reconfiguration\n");
dump_irq(bus);
ssb_mips_serial_init(mcore);
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 5fe1c22e289b..6a5622e0ded5 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -8,14 +8,14 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/ssb/ssb.h>
#include <linux/pci.h>
#include <linux/export.h>
#include <linux/delay.h>
#include <linux/ssb/ssb_embedded.h>
-#include "ssb_private.h"
-
static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address);
static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data);
static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
@@ -115,7 +115,7 @@ static int ssb_extpci_read_config(struct ssb_pcicore *pc,
u32 addr, val;
void __iomem *mmio;
- SSB_WARN_ON(!pc->hostmode);
+ WARN_ON(!pc->hostmode);
if (unlikely(len != 1 && len != 2 && len != 4))
goto out;
addr = get_cfgspace_addr(pc, bus, dev, func, off);
@@ -161,7 +161,7 @@ static int ssb_extpci_write_config(struct ssb_pcicore *pc,
u32 addr, val = 0;
void __iomem *mmio;
- SSB_WARN_ON(!pc->hostmode);
+ WARN_ON(!pc->hostmode);
if (unlikely(len != 1 && len != 2 && len != 4))
goto out;
addr = get_cfgspace_addr(pc, bus, dev, func, off);
@@ -263,7 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci_dev *d)
return -ENODEV;
}
- ssb_info("PCI: Fixing up device %s\n", pci_name(d));
+ dev_info(&d->dev, "PCI: Fixing up device %s\n", pci_name(d));
/* Fix up interrupt lines */
d->irq = ssb_mips_irq(extpci_core->dev) + 2;
@@ -284,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
return;
- ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+ dev_info(&dev->dev, "PCI: Fixing up bridge %s\n", pci_name(dev));
/* Enable PCI bridge bus mastering and memory space */
pci_set_master(dev);
if (pcibios_enable_device(dev, ~0) < 0) {
- ssb_err("PCI: SSB bridge enable failed\n");
+ dev_err(&dev->dev, "PCI: SSB bridge enable failed\n");
return;
}
@@ -298,7 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
/* Make sure our latency is high enough to handle the devices behind us */
lat = 168;
- ssb_info("PCI: Fixing latency timer of device %s to %u\n",
+ dev_info(&dev->dev,
+ "PCI: Fixing latency timer of device %s to %u\n",
pci_name(dev), lat);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
@@ -322,7 +323,7 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
return;
extpci_core = pc;
- ssb_dbg("PCIcore in host mode found\n");
+ dev_dbg(pc->dev->dev, "PCIcore in host mode found\n");
/* Reset devices on the external PCI bus */
val = SSB_PCICORE_CTL_RST_OE;
val |= SSB_PCICORE_CTL_CLK_OE;
@@ -337,7 +338,7 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
udelay(1); /* Assertion time demanded by the PCI standard */
if (pc->dev->bus->has_cardbus_slot) {
- ssb_dbg("CardBus slot detected\n");
+ dev_dbg(pc->dev->dev, "CardBus slot detected\n");
pc->cardbusmode = 1;
/* GPIO 1 resets the bridge */
ssb_gpio_out(pc->dev->bus, 1, 1);
@@ -701,7 +702,7 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
/* Calculate the "coremask" for the device. */
coremask = (1 << dev->core_index);
- SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
+ WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
if (err)
goto out;
diff --git a/drivers/ssb/embedded.c b/drivers/ssb/embedded.c
index 55e101115038..8254ed25e063 100644
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -9,6 +9,8 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/ssb/ssb.h>
@@ -17,8 +19,6 @@
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/pci.h>
-#include "ssb_private.h"
-
int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks)
{
@@ -57,8 +57,8 @@ int ssb_watchdog_register(struct ssb_bus *bus)
bus->busnumber, &wdt,
sizeof(wdt));
if (IS_ERR(pdev)) {
- ssb_dbg("can not register watchdog device, err: %li\n",
- PTR_ERR(pdev));
+ pr_debug("can not register watchdog device, err: %li\n",
+ PTR_ERR(pdev));
return PTR_ERR(pdev);
}
@@ -77,7 +77,7 @@ u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask)
else if (ssb_extif_available(&bus->extif))
res = ssb_extif_gpio_in(&bus->extif, mask);
else
- SSB_WARN_ON(1);
+ WARN_ON(1);
spin_unlock_irqrestore(&bus->gpio_lock, flags);
return res;
@@ -95,7 +95,7 @@ u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value)
else if (ssb_extif_available(&bus->extif))
res = ssb_extif_gpio_out(&bus->extif, mask, value);
else
- SSB_WARN_ON(1);
+ WARN_ON(1);
spin_unlock_irqrestore(&bus->gpio_lock, flags);
return res;
@@ -113,7 +113,7 @@ u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value)
else if (ssb_extif_available(&bus->extif))
res = ssb_extif_gpio_outen(&bus->extif, mask, value);
else
- SSB_WARN_ON(1);
+ WARN_ON(1);
spin_unlock_irqrestore(&bus->gpio_lock, flags);
return res;
@@ -145,7 +145,7 @@ u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value)
else if (ssb_extif_available(&bus->extif))
res = ssb_extif_gpio_intmask(&bus->extif, mask, value);
else
- SSB_WARN_ON(1);
+ WARN_ON(1);
spin_unlock_irqrestore(&bus->gpio_lock, flags);
return res;
@@ -163,7 +163,7 @@ u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value)
else if (ssb_extif_available(&bus->extif))
res = ssb_extif_gpio_polarity(&bus->extif, mask, value);
else
- SSB_WARN_ON(1);
+ WARN_ON(1);
spin_unlock_irqrestore(&bus->gpio_lock, flags);
return res;
diff --git a/drivers/ssb/host_soc.c b/drivers/ssb/host_soc.c
index d62992dc08b2..3b438480515c 100644
--- a/drivers/ssb/host_soc.c
+++ b/drivers/ssb/host_soc.c
@@ -8,11 +8,11 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/bcm47xx_nvram.h>
#include <linux/ssb/ssb.h>
-#include "ssb_private.h"
-
static u8 ssb_host_soc_read8(struct ssb_device *dev, u16 offset)
{
struct ssb_bus *bus = dev->bus;
@@ -61,7 +61,7 @@ static void ssb_host_soc_block_read(struct ssb_device *dev, void *buffer,
case sizeof(u16): {
__le16 *buf = buffer;
- SSB_WARN_ON(count & 1);
+ WARN_ON(count & 1);
while (count) {
*buf = (__force __le16)__raw_readw(addr);
buf++;
@@ -72,7 +72,7 @@ static void ssb_host_soc_block_read(struct ssb_device *dev, void *buffer,
case sizeof(u32): {
__le32 *buf = buffer;
- SSB_WARN_ON(count & 3);
+ WARN_ON(count & 3);
while (count) {
*buf = (__force __le32)__raw_readl(addr);
buf++;
@@ -81,7 +81,7 @@ static void ssb_host_soc_block_read(struct ssb_device *dev, void *buffer,
break;
}
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
}
#endif /* CONFIG_SSB_BLOCKIO */
@@ -134,7 +134,7 @@ static void ssb_host_soc_block_write(struct ssb_device *dev, const void *buffer,
case sizeof(u16): {
const __le16 *buf = buffer;
- SSB_WARN_ON(count & 1);
+ WARN_ON(count & 1);
while (count) {
__raw_writew((__force u16)(*buf), addr);
buf++;
@@ -145,7 +145,7 @@ static void ssb_host_soc_block_write(struct ssb_device *dev, const void *buffer,
case sizeof(u32): {
const __le32 *buf = buffer;
- SSB_WARN_ON(count & 3);
+ WARN_ON(count & 3);
while (count) {
__raw_writel((__force u32)(*buf), addr);
buf++;
@@ -154,7 +154,7 @@ static void ssb_host_soc_block_write(struct ssb_device *dev, const void *buffer,
break;
}
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
}
#endif /* CONFIG_SSB_BLOCKIO */
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 116594413f66..0a26984acb2c 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -209,7 +209,7 @@ int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
memset(ctx, 0, sizeof(*ctx));
ctx->bus = bus;
- SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
+ WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
for (i = 0; i < bus->nr_devices; i++) {
sdev = ssb_device_get(&bus->devices[i]);
@@ -220,7 +220,7 @@ int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
continue;
}
sdrv = drv_to_ssb_drv(sdev->dev->driver);
- if (SSB_WARN_ON(!sdrv->remove))
+ if (WARN_ON(!sdrv->remove))
continue;
sdrv->remove(sdev);
ctx->device_frozen[i] = 1;
@@ -248,15 +248,16 @@ int ssb_devices_thaw(struct ssb_freeze_context *ctx)
continue;
sdev = &bus->devices[i];
- if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
+ if (WARN_ON(!sdev->dev || !sdev->dev->driver))
continue;
sdrv = drv_to_ssb_drv(sdev->dev->driver);
- if (SSB_WARN_ON(!sdrv || !sdrv->probe))
+ if (WARN_ON(!sdrv || !sdrv->probe))
continue;
err = sdrv->probe(sdev, &sdev->id);
if (err) {
- ssb_err("Failed to thaw device %s\n",
+ dev_err(sdev->dev,
+ "Failed to thaw device %s\n",
dev_name(sdev->dev));
result = err;
}
@@ -431,9 +432,9 @@ void ssb_bus_unregister(struct ssb_bus *bus)
err = ssb_gpio_unregister(bus);
if (err == -EBUSY)
- ssb_dbg("Some GPIOs are still in use\n");
+ pr_debug("Some GPIOs are still in use\n");
else if (err)
- ssb_dbg("Can not unregister GPIO driver: %i\n", err);
+ pr_debug("Can not unregister GPIO driver: %i\n", err);
ssb_buses_lock();
ssb_devices_unregister(bus);
@@ -518,7 +519,7 @@ static int ssb_devices_register(struct ssb_bus *bus)
sdev->dev = dev;
err = device_register(dev);
if (err) {
- ssb_err("Could not register %s\n", dev_name(dev));
+ pr_err("Could not register %s\n", dev_name(dev));
/* Set dev to NULL to not unregister
* dev on error unwinding. */
sdev->dev = NULL;
@@ -576,9 +577,9 @@ static int ssb_attach_queued_buses(void)
err = ssb_gpio_init(bus);
if (err == -ENOTSUPP)
- ssb_dbg("GPIO driver not activated\n");
+ pr_debug("GPIO driver not activated\n");
else if (err)
- ssb_dbg("Error registering GPIO driver: %i\n", err);
+ pr_debug("Error registering GPIO driver: %i\n", err);
ssb_bus_may_powerdown(bus);
@@ -707,10 +708,12 @@ int ssb_bus_pcibus_register(struct ssb_bus *bus, struct pci_dev *host_pci)
err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
if (!err) {
- ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
+ dev_info(&host_pci->dev,
+ "Sonics Silicon Backplane found on PCI device %s\n",
dev_name(&host_pci->dev));
} else {
- ssb_err("Failed to register PCI version of SSB with error %d\n",
+ dev_err(&host_pci->dev,
+ "Failed to register PCI version of SSB with error %d\n",
err);
}
@@ -731,7 +734,8 @@ int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
if (!err) {
- ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
+ dev_info(&pcmcia_dev->dev,
+ "Sonics Silicon Backplane found on PCMCIA device %s\n",
pcmcia_dev->devname);
}
@@ -752,7 +756,8 @@ int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
if (!err) {
- ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
+ dev_info(&func->dev,
+ "Sonics Silicon Backplane found on SDIO device %s\n",
sdio_func_id(func));
}
@@ -771,8 +776,8 @@ int ssb_bus_host_soc_register(struct ssb_bus *bus, unsigned long baseaddr)
err = ssb_bus_register(bus, ssb_host_soc_get_invariants, baseaddr);
if (!err) {
- ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
- baseaddr);
+ pr_info("Sonics Silicon Backplane found at address 0x%08lX\n",
+ baseaddr);
}
return err;
@@ -856,13 +861,13 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
n1 += SSB_CHIPCO_CLK_T2_BIAS;
n2 += SSB_CHIPCO_CLK_T2_BIAS;
- SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
- SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
+ WARN_ON(!((n1 >= 2) && (n1 <= 7)));
+ WARN_ON(!((n2 >= 5) && (n2 <= 23)));
break;
case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
return 100000000;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
switch (plltype) {
@@ -911,9 +916,9 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
m1 += SSB_CHIPCO_CLK_T2_BIAS;
m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
m3 += SSB_CHIPCO_CLK_T2_BIAS;
- SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
- SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
- SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
+ WARN_ON(!((m1 >= 2) && (m1 <= 7)));
+ WARN_ON(!((m2 >= 3) && (m2 <= 10)));
+ WARN_ON(!((m3 >= 2) && (m3 <= 7)));
if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
clock /= m1;
@@ -923,7 +928,7 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
clock /= m3;
return clock;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
return 0;
}
@@ -1057,9 +1062,9 @@ static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
}
udelay(10);
}
- printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
- "register %04X to %s.\n",
- bitmask, reg, (set ? "set" : "clear"));
+ dev_err(dev->dev,
+ "Timeout waiting for bitmask %08X on register %04X to %s\n",
+ bitmask, reg, set ? "set" : "clear");
return -ETIMEDOUT;
}
@@ -1164,12 +1169,10 @@ int ssb_bus_may_powerdown(struct ssb_bus *bus)
if (err)
goto error;
out:
-#ifdef CONFIG_SSB_DEBUG
bus->powered_up = 0;
-#endif
return err;
error:
- ssb_err("Bus powerdown failed\n");
+ pr_err("Bus powerdown failed\n");
goto out;
}
EXPORT_SYMBOL(ssb_bus_may_powerdown);
@@ -1183,16 +1186,14 @@ int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
if (err)
goto error;
-#ifdef CONFIG_SSB_DEBUG
bus->powered_up = 1;
-#endif
mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
ssb_chipco_set_clockmode(&bus->chipco, mode);
return 0;
error:
- ssb_err("Bus powerup failed\n");
+ pr_err("Bus powerup failed\n");
return err;
}
EXPORT_SYMBOL(ssb_bus_powerup);
@@ -1237,15 +1238,15 @@ u32 ssb_admatch_base(u32 adm)
base = (adm & SSB_ADM_BASE0);
break;
case SSB_ADM_TYPE1:
- SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
+ WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
base = (adm & SSB_ADM_BASE1);
break;
case SSB_ADM_TYPE2:
- SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
+ WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
base = (adm & SSB_ADM_BASE2);
break;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
return base;
@@ -1261,15 +1262,15 @@ u32 ssb_admatch_size(u32 adm)
size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
break;
case SSB_ADM_TYPE1:
- SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
+ WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
break;
case SSB_ADM_TYPE2:
- SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
+ WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
break;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
size = (1 << (size + 1));
@@ -1300,19 +1301,19 @@ static int __init ssb_modinit(void)
err = b43_pci_ssb_bridge_init();
if (err) {
- ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+ pr_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
/* don't fail SSB init because of this */
err = 0;
}
err = ssb_host_pcmcia_init();
if (err) {
- ssb_err("PCMCIA host initialization failed\n");
+ pr_err("PCMCIA host initialization failed\n");
/* don't fail SSB init because of this */
err = 0;
}
err = ssb_gige_init();
if (err) {
- ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+ pr_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
/* don't fail SSB init because of this */
err = 0;
}
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 77b551da5728..84807a9b4b13 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -15,14 +15,14 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
-#include "ssb_private.h"
-
/* Define the following to 1 to enable a printk on each coreswitch. */
#define SSB_VERBOSE_PCICORESWITCH_DEBUG 0
@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
}
return 0;
error:
- ssb_err("Failed to switch to core %u\n", coreidx);
+ pr_err("Failed to switch to core %u\n", coreidx);
return -ENODEV;
}
@@ -67,9 +67,8 @@ int ssb_pci_switch_core(struct ssb_bus *bus,
unsigned long flags;
#if SSB_VERBOSE_PCICORESWITCH_DEBUG
- ssb_info("Switching to %s core, index %d\n",
- ssb_core_name(dev->id.coreid),
- dev->core_index);
+ pr_info("Switching to %s core, index %d\n",
+ ssb_core_name(dev->id.coreid), dev->core_index);
#endif
spin_lock_irqsave(&bus->bar_lock, flags);
@@ -161,7 +160,7 @@ out:
return err;
err_pci:
- printk(KERN_ERR PFX "Error: ssb_pci_xtal() could not access PCI config space!\n");
+ pr_err("Error: ssb_pci_xtal() could not access PCI config space!\n");
err = -EBUSY;
goto out;
}
@@ -286,7 +285,7 @@ static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
u32 spromctl;
u16 size = bus->sprom_size;
- ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ pr_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
if (err)
goto err_ctlreg;
@@ -294,17 +293,17 @@ static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
if (err)
goto err_ctlreg;
- ssb_notice("[ 0%%");
+ pr_notice("[ 0%%");
msleep(500);
for (i = 0; i < size; i++) {
if (i == size / 4)
- ssb_cont("25%%");
+ pr_cont("25%%");
else if (i == size / 2)
- ssb_cont("50%%");
+ pr_cont("50%%");
else if (i == (size * 3) / 4)
- ssb_cont("75%%");
+ pr_cont("75%%");
else if (i % 2)
- ssb_cont(".");
+ pr_cont(".");
writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
mmiowb();
msleep(20);
@@ -317,12 +316,12 @@ static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
if (err)
goto err_ctlreg;
msleep(500);
- ssb_cont("100%% ]\n");
- ssb_notice("SPROM written\n");
+ pr_cont("100%% ]\n");
+ pr_notice("SPROM written\n");
return 0;
err_ctlreg:
- ssb_err("Could not access SPROM control register.\n");
+ pr_err("Could not access SPROM control register.\n");
return err;
}
@@ -816,7 +815,7 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
memset(out, 0, sizeof(*out));
out->revision = in[size - 1] & 0x00FF;
- ssb_dbg("SPROM revision %d detected\n", out->revision);
+ pr_debug("SPROM revision %d detected\n", out->revision);
memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
memset(out->et1mac, 0xFF, 6);
@@ -825,7 +824,7 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
* number stored in the SPROM.
* Always extract r1. */
out->revision = 1;
- ssb_dbg("SPROM treated as revision %d\n", out->revision);
+ pr_debug("SPROM treated as revision %d\n", out->revision);
}
switch (out->revision) {
@@ -842,8 +841,8 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
sprom_extract_r8(out, in);
break;
default:
- ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
- out->revision);
+ pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
+ out->revision);
out->revision = 1;
sprom_extract_r123(out, in);
}
@@ -863,7 +862,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
u16 *buf;
if (!ssb_is_sprom_available(bus)) {
- ssb_err("No SPROM available!\n");
+ pr_err("No SPROM available!\n");
return -ENODEV;
}
if (bus->chipco.dev) { /* can be unavailable! */
@@ -882,7 +881,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
} else {
bus->sprom_offset = SSB_SPROM_BASE1;
}
- ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
+ pr_debug("SPROM offset is 0x%x\n", bus->sprom_offset);
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
@@ -907,16 +906,16 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
* available for this device in some other storage */
err = ssb_fill_sprom_with_fallback(bus, sprom);
if (err) {
- ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
- err);
+ pr_warn("WARNING: Using fallback SPROM failed (err %d)\n",
+ err);
goto out_free;
} else {
- ssb_dbg("Using SPROM revision %d provided by platform\n",
- sprom->revision);
+ pr_debug("Using SPROM revision %d provided by platform\n",
+ sprom->revision);
err = 0;
goto out_free;
}
- ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+ pr_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
}
}
err = sprom_extract(bus, sprom, buf, bus->sprom_size);
@@ -947,14 +946,12 @@ out:
return err;
}
-#ifdef CONFIG_SSB_DEBUG
static int ssb_pci_assert_buspower(struct ssb_bus *bus)
{
if (likely(bus->powered_up))
return 0;
- printk(KERN_ERR PFX "FATAL ERROR: Bus powered down "
- "while accessing PCI MMIO space\n");
+ pr_err("FATAL ERROR: Bus powered down while accessing PCI MMIO space\n");
if (bus->power_warn_count <= 10) {
bus->power_warn_count++;
dump_stack();
@@ -962,12 +959,6 @@ static int ssb_pci_assert_buspower(struct ssb_bus *bus)
return -ENODEV;
}
-#else /* DEBUG */
-static inline int ssb_pci_assert_buspower(struct ssb_bus *bus)
-{
- return 0;
-}
-#endif /* DEBUG */
static u8 ssb_pci_read8(struct ssb_device *dev, u16 offset)
{
@@ -1026,15 +1017,15 @@ static void ssb_pci_block_read(struct ssb_device *dev, void *buffer,
ioread8_rep(addr, buffer, count);
break;
case sizeof(u16):
- SSB_WARN_ON(count & 1);
+ WARN_ON(count & 1);
ioread16_rep(addr, buffer, count >> 1);
break;
case sizeof(u32):
- SSB_WARN_ON(count & 3);
+ WARN_ON(count & 3);
ioread32_rep(addr, buffer, count >> 2);
break;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
return;
@@ -1100,15 +1091,15 @@ static void ssb_pci_block_write(struct ssb_device *dev, const void *buffer,
iowrite8_rep(addr, buffer, count);
break;
case sizeof(u16):
- SSB_WARN_ON(count & 1);
+ WARN_ON(count & 1);
iowrite16_rep(addr, buffer, count >> 1);
break;
case sizeof(u32):
- SSB_WARN_ON(count & 3);
+ WARN_ON(count & 3);
iowrite32_rep(addr, buffer, count >> 2);
break;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
}
#endif /* CONFIG_SSB_BLOCKIO */
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index f03422bbf087..567013f8a8be 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -8,6 +8,8 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/ssb/ssb.h>
#include <linux/delay.h>
#include <linux/io.h>
@@ -18,8 +20,6 @@
#include <pcmcia/ds.h>
#include <pcmcia/cisreg.h>
-#include "ssb_private.h"
-
/* Define the following to 1 to enable a printk on each coreswitch. */
#define SSB_VERBOSE_PCMCIACORESWITCH_DEBUG 0
@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus,
return 0;
error:
- ssb_err("Failed to switch to core %u\n", coreidx);
+ pr_err("Failed to switch to core %u\n", coreidx);
return err;
}
@@ -152,9 +152,8 @@ static int ssb_pcmcia_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
int err;
#if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
- ssb_info("Switching to %s core, index %d\n",
- ssb_core_name(dev->id.coreid),
- dev->core_index);
+ pr_info("Switching to %s core, index %d\n",
+ ssb_core_name(dev->id.coreid), dev->core_index);
#endif
err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
@@ -170,7 +169,7 @@ int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg)
int err;
u8 val;
- SSB_WARN_ON((seg != 0) && (seg != 1));
+ WARN_ON((seg != 0) && (seg != 1));
while (1) {
err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_MEMSEG, seg);
if (err)
@@ -190,7 +189,7 @@ int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg)
return 0;
error:
- ssb_err("Failed to switch pcmcia segment\n");
+ pr_err("Failed to switch pcmcia segment\n");
return err;
}
@@ -300,7 +299,7 @@ static void ssb_pcmcia_block_read(struct ssb_device *dev, void *buffer,
case sizeof(u16): {
__le16 *buf = buffer;
- SSB_WARN_ON(count & 1);
+ WARN_ON(count & 1);
while (count) {
*buf = (__force __le16)__raw_readw(addr);
buf++;
@@ -311,7 +310,7 @@ static void ssb_pcmcia_block_read(struct ssb_device *dev, void *buffer,
case sizeof(u32): {
__le16 *buf = buffer;
- SSB_WARN_ON(count & 3);
+ WARN_ON(count & 3);
while (count) {
*buf = (__force __le16)__raw_readw(addr);
buf++;
@@ -322,7 +321,7 @@ static void ssb_pcmcia_block_read(struct ssb_device *dev, void *buffer,
break;
}
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
unlock:
spin_unlock_irqrestore(&bus->bar_lock, flags);
@@ -400,7 +399,7 @@ static void ssb_pcmcia_block_write(struct ssb_device *dev, const void *buffer,
case sizeof(u16): {
const __le16 *buf = buffer;
- SSB_WARN_ON(count & 1);
+ WARN_ON(count & 1);
while (count) {
__raw_writew((__force u16)(*buf), addr);
buf++;
@@ -411,7 +410,7 @@ static void ssb_pcmcia_block_write(struct ssb_device *dev, const void *buffer,
case sizeof(u32): {
const __le16 *buf = buffer;
- SSB_WARN_ON(count & 3);
+ WARN_ON(count & 3);
while (count) {
__raw_writew((__force u16)(*buf), addr);
buf++;
@@ -422,7 +421,7 @@ static void ssb_pcmcia_block_write(struct ssb_device *dev, const void *buffer,
break;
}
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
unlock:
mmiowb();
@@ -547,39 +546,39 @@ static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom)
bool failed = 0;
size_t size = SSB_PCMCIA_SPROM_SIZE;
- ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ pr_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
if (err) {
- ssb_notice("Could not enable SPROM write access\n");
+ pr_notice("Could not enable SPROM write access\n");
return -EBUSY;
}
- ssb_notice("[ 0%%");
+ pr_notice("[ 0%%");
msleep(500);
for (i = 0; i < size; i++) {
if (i == size / 4)
- ssb_cont("25%%");
+ pr_cont("25%%");
else if (i == size / 2)
- ssb_cont("50%%");
+ pr_cont("50%%");
else if (i == (size * 3) / 4)
- ssb_cont("75%%");
+ pr_cont("75%%");
else if (i % 2)
- ssb_cont(".");
+ pr_cont(".");
err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
if (err) {
- ssb_notice("Failed to write to SPROM\n");
+ pr_notice("Failed to write to SPROM\n");
failed = 1;
break;
}
}
err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
if (err) {
- ssb_notice("Could not disable SPROM write access\n");
+ pr_notice("Could not disable SPROM write access\n");
failed = 1;
}
msleep(500);
if (!failed) {
- ssb_cont("100%% ]\n");
- ssb_notice("SPROM written\n");
+ pr_cont("100%% ]\n");
+ pr_notice("SPROM written\n");
}
return failed ? -EBUSY : 0;
@@ -693,9 +692,8 @@ static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
return -ENOSPC; /* continue with next entry */
error:
- ssb_err(
- "PCMCIA: Failed to fetch device invariants: %s\n",
- error_description);
+ pr_err("PCMCIA: Failed to fetch device invariants: %s\n",
+ error_description);
return -ENODEV;
}
@@ -715,8 +713,7 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
ssb_pcmcia_get_mac, sprom);
if (res != 0) {
- ssb_err(
- "PCMCIA: Failed to fetch MAC address\n");
+ pr_err("PCMCIA: Failed to fetch MAC address\n");
return -ENODEV;
}
@@ -726,8 +723,7 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
if ((res == 0) || (res == -ENOSPC))
return 0;
- ssb_err(
- "PCMCIA: Failed to fetch device invariants\n");
+ pr_err("PCMCIA: Failed to fetch device invariants\n");
return -ENODEV;
}
@@ -836,6 +832,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
return 0;
error:
- ssb_err("Failed to initialize PCMCIA host device\n");
+ pr_err("Failed to initialize PCMCIA host device\n");
return err;
}
diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c
index b9429df583eb..6ceee98ed6ff 100644
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -12,6 +12,8 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include "ssb_private.h"
+
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/pci.h>
@@ -20,8 +22,6 @@
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
-#include "ssb_private.h"
-
const char *ssb_core_name(u16 coreid)
{
@@ -125,7 +125,7 @@ static u16 pcidev_to_chipid(struct pci_dev *pci_dev)
chipid_fallback = 0x4401;
break;
default:
- ssb_err("PCI-ID not in fallback list\n");
+ dev_err(&pci_dev->dev, "PCI-ID not in fallback list\n");
}
return chipid_fallback;
@@ -151,7 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
case 0x4704:
return 9;
default:
- ssb_err("CHIPID not in nrcores fallback list\n");
+ pr_err("CHIPID not in nrcores fallback list\n");
}
return 1;
@@ -210,7 +210,7 @@ void ssb_iounmap(struct ssb_bus *bus)
#ifdef CONFIG_SSB_PCIHOST
pci_iounmap(bus->host_pci, bus->mmio);
#else
- SSB_BUG_ON(1); /* Can't reach this code. */
+ WARN_ON(1); /* Can't reach this code. */
#endif
break;
case SSB_BUSTYPE_SDIO:
@@ -236,7 +236,7 @@ static void __iomem *ssb_ioremap(struct ssb_bus *bus,
#ifdef CONFIG_SSB_PCIHOST
mmio = pci_iomap(bus->host_pci, 0, ~0UL);
#else
- SSB_BUG_ON(1); /* Can't reach this code. */
+ WARN_ON(1); /* Can't reach this code. */
#endif
break;
case SSB_BUSTYPE_SDIO:
@@ -318,13 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
bus->chip_package = 0;
}
}
- ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
- bus->chip_id, bus->chip_rev, bus->chip_package);
+ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
+ bus->chip_id, bus->chip_rev, bus->chip_package);
if (!bus->nr_devices)
bus->nr_devices = chipid_to_nrcores(bus->chip_id);
if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
- ssb_err("More than %d ssb cores found (%d)\n",
- SSB_MAX_NR_CORES, bus->nr_devices);
+ pr_err("More than %d ssb cores found (%d)\n",
+ SSB_MAX_NR_CORES, bus->nr_devices);
goto err_unmap;
}
if (bus->bustype == SSB_BUSTYPE_SSB) {
@@ -355,18 +355,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
dev->bus = bus;
dev->ops = bus->ops;
- printk(KERN_DEBUG PFX
- "Core %d found: %s "
- "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
- i, ssb_core_name(dev->id.coreid),
- dev->id.coreid, dev->id.revision, dev->id.vendor);
+ pr_debug("Core %d found: %s (cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
+ i, ssb_core_name(dev->id.coreid),
+ dev->id.coreid, dev->id.revision, dev->id.vendor);
switch (dev->id.coreid) {
case SSB_DEV_80211:
nr_80211_cores++;
if (nr_80211_cores > 1) {
if (!we_support_multiple_80211_cores(bus)) {
- ssb_dbg("Ignoring additional 802.11 core\n");
+ pr_debug("Ignoring additional 802.11 core\n");
continue;
}
}
@@ -374,7 +372,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
case SSB_DEV_EXTIF:
#ifdef CONFIG_SSB_DRIVER_EXTIF
if (bus->extif.dev) {
- ssb_warn("WARNING: Multiple EXTIFs found\n");
+ pr_warn("WARNING: Multiple EXTIFs found\n");
break;
}
bus->extif.dev = dev;
@@ -382,7 +380,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
break;
case SSB_DEV_CHIPCOMMON:
if (bus->chipco.dev) {
- ssb_warn("WARNING: Multiple ChipCommon found\n");
+ pr_warn("WARNING: Multiple ChipCommon found\n");
break;
}
bus->chipco.dev = dev;
@@ -391,7 +389,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
case SSB_DEV_MIPS_3302:
#ifdef CONFIG_SSB_DRIVER_MIPS
if (bus->mipscore.dev) {
- ssb_warn("WARNING: Multiple MIPS cores found\n");
+ pr_warn("WARNING: Multiple MIPS cores found\n");
break;
}
bus->mipscore.dev = dev;
@@ -412,7 +410,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
}
}
if (bus->pcicore.dev) {
- ssb_warn("WARNING: Multiple PCI(E) cores found\n");
+ pr_warn("WARNING: Multiple PCI(E) cores found\n");
break;
}
bus->pcicore.dev = dev;
diff --git a/drivers/ssb/sdio.c b/drivers/ssb/sdio.c
index 2278e43614bd..7fe0afb42234 100644
--- a/drivers/ssb/sdio.c
+++ b/drivers/ssb/sdio.c
@@ -12,14 +12,14 @@
*
*/
+#include "ssb_private.h"
+
#include <linux/ssb/ssb.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/etherdevice.h>
#include <linux/mmc/sdio_func.h>
-#include "ssb_private.h"
-
/* Define the following to 1 to enable a printk on each coreswitch. */
#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG 0
@@ -316,18 +316,18 @@ static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
break;
}
case sizeof(u16): {
- SSB_WARN_ON(count & 1);
+ WARN_ON(count & 1);
error = sdio_readsb(bus->host_sdio, buffer, offset, count);
break;
}
case sizeof(u32): {
- SSB_WARN_ON(count & 3);
+ WARN_ON(count & 3);
offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
error = sdio_readsb(bus->host_sdio, buffer, offset, count);
break;
}
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
if (!error)
goto out;
@@ -423,18 +423,18 @@ static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
(void *)buffer, count);
break;
case sizeof(u16):
- SSB_WARN_ON(count & 1);
+ WARN_ON(count & 1);
error = sdio_writesb(bus->host_sdio, offset,
(void *)buffer, count);
break;
case sizeof(u32):
- SSB_WARN_ON(count & 3);
+ WARN_ON(count & 3);
offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
error = sdio_writesb(bus->host_sdio, offset,
(void *)buffer, count);
break;
default:
- SSB_WARN_ON(1);
+ WARN_ON(1);
}
if (!error)
goto out;
diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
index e753fbe302a7..4f028a80d6c4 100644
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_bus *bus,
goto out_kfree;
err = ssb_devices_freeze(bus, &freeze);
if (err) {
- ssb_err("SPROM write: Could not freeze all devices\n");
+ pr_err("SPROM write: Could not freeze all devices\n");
goto out_unlock;
}
res = sprom_write(bus, sprom);
err = ssb_devices_thaw(&freeze);
if (err)
- ssb_err("SPROM write: Could not thaw all devices\n");
+ pr_err("SPROM write: Could not thaw all devices\n");
out_unlock:
mutex_unlock(&bus->sprom_mutex);
out_kfree:
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index ef9ac8efcab4..5f31bdfbe77f 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -2,47 +2,14 @@
#ifndef LINUX_SSB_PRIVATE_H_
#define LINUX_SSB_PRIVATE_H_
+#define PFX "ssb: "
+#define pr_fmt(fmt) PFX fmt
+
#include <linux/ssb/ssb.h>
#include <linux/types.h>
#include <linux/bcm47xx_wdt.h>
-#define PFX "ssb: "
-
-#ifdef CONFIG_SSB_SILENT
-# define ssb_printk(fmt, ...) \
- do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
-#else
-# define ssb_printk(fmt, ...) \
- printk(fmt, ##__VA_ARGS__)
-#endif /* CONFIG_SSB_SILENT */
-
-#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
-#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
-#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
-#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
-#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
-#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
-
-/* dprintk: Debugging printk; vanishes for non-debug compilation */
-#ifdef CONFIG_SSB_DEBUG
-# define ssb_dbg(fmt, ...) \
- ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
-#else
-# define ssb_dbg(fmt, ...) \
- do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
-#endif
-
-#ifdef CONFIG_SSB_DEBUG
-# define SSB_WARN_ON(x) WARN_ON(x)
-# define SSB_BUG_ON(x) BUG_ON(x)
-#else
-static inline int __ssb_do_nothing(int x) { return x; }
-# define SSB_WARN_ON(x) __ssb_do_nothing(unlikely(!!(x)))
-# define SSB_BUG_ON(x) __ssb_do_nothing(unlikely(!!(x)))
-#endif
-
-
/* pci.c */
#ifdef CONFIG_SSB_PCIHOST
extern int ssb_pci_switch_core(struct ssb_bus *bus,
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 11:28:53 +0100