1 files changed, 566 insertions, 17 deletions

diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index f65f0d109fc8..ba23150c7bde 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -26,6 +26,7 @@
 #include <linux/thermal.h>
 #include <linux/cpufreq.h>
 #include <linux/err.h>
+#include <linux/pm_opp.h>
 #include <linux/slab.h>
 #include <linux/cpu.h>
 #include <linux/cpu_cooling.h>
@@ -45,6 +46,19 @@
  */
 
 /**
+ * struct power_table - frequency to power conversion
+ * @frequency:	frequency in KHz
+ * @power:	power in mW
+ *
+ * This structure is built when the cooling device registers and helps
+ * in translating frequency to power and viceversa.
+ */
+struct power_table {
+	u32 frequency;
+	u32 power;
+};
+
+/**
  * struct cpufreq_cooling_device - data for cooling device with cpufreq
  * @id: unique integer value corresponding to each cpufreq_cooling_device
  *	registered.
@@ -58,6 +72,15 @@
  *	cpufreq frequencies.
  * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device.
  * @node: list_head to link all cpufreq_cooling_device together.
+ * @last_load: load measured by the latest call to cpufreq_get_actual_power()
+ * @time_in_idle: previous reading of the absolute time that this cpu was idle
+ * @time_in_idle_timestamp: wall time of the last invocation of
+ *	get_cpu_idle_time_us()
+ * @dyn_power_table: array of struct power_table for frequency to power
+ *	conversion, sorted in ascending order.
+ * @dyn_power_table_entries: number of entries in the @dyn_power_table array
+ * @cpu_dev: the first cpu_device from @allowed_cpus that has OPPs registered
+ * @plat_get_static_power: callback to calculate the static power
  *
  * This structure is required for keeping information of each registered
  * cpufreq_cooling_device.
@@ -71,6 +94,13 @@ struct cpufreq_cooling_device {
 	unsigned int *freq_table;	/* In descending order */
 	struct cpumask allowed_cpus;
 	struct list_head node;
+	u32 last_load;
+	u64 *time_in_idle;
+	u64 *time_in_idle_timestamp;
+	struct power_table *dyn_power_table;
+	int dyn_power_table_entries;
+	struct device *cpu_dev;
+	get_static_t plat_get_static_power;
 };
 static DEFINE_IDR(cpufreq_idr);
 static DEFINE_MUTEX(cooling_cpufreq_lock);
@@ -167,6 +197,39 @@ unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq)
 }
 EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level);
 
+static void update_cpu_device(int cpu)
+{
+	struct cpufreq_cooling_device *cpufreq_dev;
+
+	mutex_lock(&cooling_cpufreq_lock);
+	list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
+		if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) {
+			cpufreq_dev->cpu_dev = get_cpu_device(cpu);
+			if (!cpufreq_dev->cpu_dev) {
+				dev_warn(&cpufreq_dev->cool_dev->device,
+					"No cpu device for new policy cpu %d\n",
+					 cpu);
+			}
+			break;
+		}
+	}
+	mutex_unlock(&cooling_cpufreq_lock);
+}
+
+static void remove_cpu_device(int cpu)
+{
+	struct cpufreq_cooling_device *cpufreq_dev;
+
+	mutex_lock(&cooling_cpufreq_lock);
+	list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
+		if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) {
+			cpufreq_dev->cpu_dev = NULL;
+			break;
+		}
+	}
+	mutex_unlock(&cooling_cpufreq_lock);
+}
+
 /**
  * cpufreq_thermal_notifier - notifier callback for cpufreq policy change.
  * @nb:	struct notifier_block * with callback info.
@@ -186,23 +249,240 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb,
 	unsigned long max_freq = 0;
 	struct cpufreq_cooling_device *cpufreq_dev;
 
-	if (event != CPUFREQ_ADJUST)
-		return 0;
+	switch (event) {
 
-	mutex_lock(&cooling_cpufreq_lock);
-	list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
-		if (!cpumask_test_cpu(policy->cpu,
-					&cpufreq_dev->allowed_cpus))
+	case CPUFREQ_ADJUST:
+		mutex_lock(&cooling_cpufreq_lock);
+		list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
+			if (!cpumask_test_cpu(policy->cpu,
+					      &cpufreq_dev->allowed_cpus))
+				continue;
+
+			max_freq = cpufreq_dev->cpufreq_val;
+
+			if (policy->max != max_freq)
+				cpufreq_verify_within_limits(policy, 0,
+							     max_freq);
+		}
+		mutex_unlock(&cooling_cpufreq_lock);
+		break;
+
+	case CPUFREQ_CREATE_POLICY:
+		update_cpu_device(policy->cpu);
+		break;
+	case CPUFREQ_REMOVE_POLICY:
+		remove_cpu_device(policy->cpu);
+		break;
+	default:
+		return NOTIFY_DONE;
+	}
+
+	return NOTIFY_OK;
+}
+
+/**
+ * build_dyn_power_table() - create a dynamic power to frequency table
+ * @cpufreq_device:	the cpufreq cooling device in which to store the table
+ * @capacitance: dynamic power coefficient for these cpus
+ *
+ * Build a dynamic power to frequency table for this cpu and store it
+ * in @cpufreq_device.  This table will be used in cpu_power_to_freq() and
+ * cpu_freq_to_power() to convert between power and frequency
+ * efficiently.  Power is stored in mW, frequency in KHz.  The
+ * resulting table is in ascending order.
+ *
+ * Return: 0 on success, -E* on error.
+ */
+static int build_dyn_power_table(struct cpufreq_cooling_device *cpufreq_device,
+				 u32 capacitance)
+{
+	struct power_table *power_table;
+	struct dev_pm_opp *opp;
+	struct device *dev = NULL;
+	int num_opps = 0, cpu, i, ret = 0;
+	unsigned long freq;
+
+	rcu_read_lock();
+
+	for_each_cpu(cpu, &cpufreq_device->allowed_cpus) {
+		dev = get_cpu_device(cpu);
+		if (!dev) {
+			dev_warn(&cpufreq_device->cool_dev->device,
+				 "No cpu device for cpu %d\n", cpu);
 			continue;
+		}
 
-		max_freq = cpufreq_dev->cpufreq_val;
+		num_opps = dev_pm_opp_get_opp_count(dev);
+		if (num_opps > 0) {
+			break;
+		} else if (num_opps < 0) {
+			ret = num_opps;
+			goto unlock;
+		}
+	}
 
-		if (policy->max != max_freq)
-			cpufreq_verify_within_limits(policy, 0, max_freq);
+	if (num_opps == 0) {
+		ret = -EINVAL;
+		goto unlock;
 	}
-	mutex_unlock(&cooling_cpufreq_lock);
 
-	return 0;
+	power_table = kcalloc(num_opps, sizeof(*power_table), GFP_KERNEL);
+
+	for (freq = 0, i = 0;
+	     opp = dev_pm_opp_find_freq_ceil(dev, &freq), !IS_ERR(opp);
+	     freq++, i++) {
+		u32 freq_mhz, voltage_mv;
+		u64 power;
+
+		freq_mhz = freq / 1000000;
+		voltage_mv = dev_pm_opp_get_voltage(opp) / 1000;
+
+		/*
+		 * Do the multiplication with MHz and millivolt so as
+		 * to not overflow.
+		 */
+		power = (u64)capacitance * freq_mhz * voltage_mv * voltage_mv;
+		do_div(power, 1000000000);
+
+		/* frequency is stored in power_table in KHz */
+		power_table[i].frequency = freq / 1000;
+
+		/* power is stored in mW */
+		power_table[i].power = power;
+	}
+
+	if (i == 0) {
+		ret = PTR_ERR(opp);
+		goto unlock;
+	}
+
+	cpufreq_device->cpu_dev = dev;
+	cpufreq_device->dyn_power_table = power_table;
+	cpufreq_device->dyn_power_table_entries = i;
+
+unlock:
+	rcu_read_unlock();
+	return ret;
+}
+
+static u32 cpu_freq_to_power(struct cpufreq_cooling_device *cpufreq_device,
+			     u32 freq)
+{
+	int i;
+	struct power_table *pt = cpufreq_device->dyn_power_table;
+
+	for (i = 1; i < cpufreq_device->dyn_power_table_entries; i++)
+		if (freq < pt[i].frequency)
+			break;
+
+	return pt[i - 1].power;
+}
+
+static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_device,
+			     u32 power)
+{
+	int i;
+	struct power_table *pt = cpufreq_device->dyn_power_table;
+
+	for (i = 1; i < cpufreq_device->dyn_power_table_entries; i++)
+		if (power < pt[i].power)
+			break;
+
+	return pt[i - 1].frequency;
+}
+
+/**
+ * get_load() - get load for a cpu since last updated
+ * @cpufreq_device:	&struct cpufreq_cooling_device for this cpu
+ * @cpu:	cpu number
+ *
+ * Return: The average load of cpu @cpu in percentage since this
+ * function was last called.
+ */
+static u32 get_load(struct cpufreq_cooling_device *cpufreq_device, int cpu)
+{
+	u32 load;
+	u64 now, now_idle, delta_time, delta_idle;
+
+	now_idle = get_cpu_idle_time(cpu, &now, 0);
+	delta_idle = now_idle - cpufreq_device->time_in_idle[cpu];
+	delta_time = now - cpufreq_device->time_in_idle_timestamp[cpu];
+
+	if (delta_time <= delta_idle)
+		load = 0;
+	else
+		load = div64_u64(100 * (delta_time - delta_idle), delta_time);
+
+	cpufreq_device->time_in_idle[cpu] = now_idle;
+	cpufreq_device->time_in_idle_timestamp[cpu] = now;
+
+	return load;
+}
+
+/**
+ * get_static_power() - calculate the static power consumed by the cpus
+ * @cpufreq_device:	struct &cpufreq_cooling_device for this cpu cdev
+ * @tz:		thermal zone device in which we're operating
+ * @freq:	frequency in KHz
+ * @power:	pointer in which to store the calculated static power
+ *
+ * Calculate the static power consumed by the cpus described by
+ * @cpu_actor running at frequency @freq.  This function relies on a
+ * platform specific function that should have been provided when the
+ * actor was registered.  If it wasn't, the static power is assumed to
+ * be negligible.  The calculated static power is stored in @power.
+ *
+ * Return: 0 on success, -E* on failure.
+ */
+static int get_static_power(struct cpufreq_cooling_device *cpufreq_device,
+			    struct thermal_zone_device *tz, unsigned long freq,
+			    u32 *power)
+{
+	struct dev_pm_opp *opp;
+	unsigned long voltage;
+	struct cpumask *cpumask = &cpufreq_device->allowed_cpus;
+	unsigned long freq_hz = freq * 1000;
+
+	if (!cpufreq_device->plat_get_static_power ||
+	    !cpufreq_device->cpu_dev) {
+		*power = 0;
+		return 0;
+	}
+
+	rcu_read_lock();
+
+	opp = dev_pm_opp_find_freq_exact(cpufreq_device->cpu_dev, freq_hz,
+					 true);
+	voltage = dev_pm_opp_get_voltage(opp);
+
+	rcu_read_unlock();
+
+	if (voltage == 0) {
+		dev_warn_ratelimited(cpufreq_device->cpu_dev,
+				     "Failed to get voltage for frequency %lu: %ld\n",
+				     freq_hz, IS_ERR(opp) ? PTR_ERR(opp) : 0);
+		return -EINVAL;
+	}
+
+	return cpufreq_device->plat_get_static_power(cpumask, tz->passive_delay,
+						     voltage, power);
+}
+
+/**
+ * get_dynamic_power() - calculate the dynamic power
+ * @cpufreq_device:	&cpufreq_cooling_device for this cdev
+ * @freq:	current frequency
+ *
+ * Return: the dynamic power consumed by the cpus described by
+ * @cpufreq_device.
+ */
+static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_device,
+			     unsigned long freq)
+{
+	u32 raw_cpu_power;
+
+	raw_cpu_power = cpu_freq_to_power(cpufreq_device, freq);
+	return (raw_cpu_power * cpufreq_device->last_load) / 100;
 }
 
 /* cpufreq cooling device callback functions are defined below */
@@ -280,8 +560,169 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 	return 0;
 }
 
+/**
+ * cpufreq_get_requested_power() - get the current power
+ * @cdev:	&thermal_cooling_device pointer
+ * @tz:		a valid thermal zone device pointer
+ * @power:	pointer in which to store the resulting power
+ *
+ * Calculate the current power consumption of the cpus in milliwatts
+ * and store it in @power.  This function should actually calculate
+ * the requested power, but it's hard to get the frequency that
+ * cpufreq would have assigned if there were no thermal limits.
+ * Instead, we calculate the current power on the assumption that the
+ * immediate future will look like the immediate past.
+ *
+ * We use the current frequency and the average load since this
+ * function was last called.  In reality, there could have been
+ * multiple opps since this function was last called and that affects
+ * the load calculation.  While it's not perfectly accurate, this
+ * simplification is good enough and works.  REVISIT this, as more
+ * complex code may be needed if experiments show that it's not
+ * accurate enough.
+ *
+ * Return: 0 on success, -E* if getting the static power failed.
+ */
+static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev,
+				       struct thermal_zone_device *tz,
+				       u32 *power)
+{
+	unsigned long freq;
+	int cpu, ret;
+	u32 static_power, dynamic_power, total_load = 0;
+	struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+
+	freq = cpufreq_quick_get(cpumask_any(&cpufreq_device->allowed_cpus));
+
+	for_each_cpu(cpu, &cpufreq_device->allowed_cpus) {
+		u32 load;
+
+		if (cpu_online(cpu))
+			load = get_load(cpufreq_device, cpu);
+		else
+			load = 0;
+
+		total_load += load;
+	}
+
+	cpufreq_device->last_load = total_load;
+
+	dynamic_power = get_dynamic_power(cpufreq_device, freq);
+	ret = get_static_power(cpufreq_device, tz, freq, &static_power);
+	if (ret)
+		return ret;
+
+	*power = static_power + dynamic_power;
+	return 0;
+}
+
+/**
+ * cpufreq_state2power() - convert a cpu cdev state to power consumed
+ * @cdev:	&thermal_cooling_device pointer
+ * @tz:		a valid thermal zone device pointer
+ * @state:	cooling device state to be converted
+ * @power:	pointer in which to store the resulting power
+ *
+ * Convert cooling device state @state into power consumption in
+ * milliwatts assuming 100% load.  Store the calculated power in
+ * @power.
+ *
+ * Return: 0 on success, -EINVAL if the cooling device state could not
+ * be converted into a frequency or other -E* if there was an error
+ * when calculating the static power.
+ */
+static int cpufreq_state2power(struct thermal_cooling_device *cdev,
+			       struct thermal_zone_device *tz,
+			       unsigned long state, u32 *power)
+{
+	unsigned int freq, num_cpus;
+	cpumask_t cpumask;
+	u32 static_power, dynamic_power;
+	int ret;
+	struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+
+	cpumask_and(&cpumask, &cpufreq_device->allowed_cpus, cpu_online_mask);
+	num_cpus = cpumask_weight(&cpumask);
+
+	/* None of our cpus are online, so no power */
+	if (num_cpus == 0) {
+		*power = 0;
+		return 0;
+	}
+
+	freq = cpufreq_device->freq_table[state];
+	if (!freq)
+		return -EINVAL;
+
+	dynamic_power = cpu_freq_to_power(cpufreq_device, freq) * num_cpus;
+	ret = get_static_power(cpufreq_device, tz, freq, &static_power);
+	if (ret)
+		return ret;
+
+	*power = static_power + dynamic_power;
+	return 0;
+}
+
+/**
+ * cpufreq_power2state() - convert power to a cooling device state
+ * @cdev:	&thermal_cooling_device pointer
+ * @tz:		a valid thermal zone device pointer
+ * @power:	power in milliwatts to be converted
+ * @state:	pointer in which to store the resulting state
+ *
+ * Calculate a cooling device state for the cpus described by @cdev
+ * that would allow them to consume at most @power mW and store it in
+ * @state.  Note that this calculation depends on external factors
+ * such as the cpu load or the current static power.  Calling this
+ * function with the same power as input can yield different cooling
+ * device states depending on those external factors.
+ *
+ * Return: 0 on success, -ENODEV if no cpus are online or -EINVAL if
+ * the calculated frequency could not be converted to a valid state.
+ * The latter should not happen unless the frequencies available to
+ * cpufreq have changed since the initialization of the cpu cooling
+ * device.
+ */
+static int cpufreq_power2state(struct thermal_cooling_device *cdev,
+			       struct thermal_zone_device *tz, u32 power,
+			       unsigned long *state)
+{
+	unsigned int cpu, cur_freq, target_freq;
+	int ret;
+	s32 dyn_power;
+	u32 last_load, normalised_power, static_power;
+	struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+
+	cpu = cpumask_any_and(&cpufreq_device->allowed_cpus, cpu_online_mask);
+
+	/* None of our cpus are online */
+	if (cpu >= nr_cpu_ids)
+		return -ENODEV;
+
+	cur_freq = cpufreq_quick_get(cpu);
+	ret = get_static_power(cpufreq_device, tz, cur_freq, &static_power);
+	if (ret)
+		return ret;
+
+	dyn_power = power - static_power;
+	dyn_power = dyn_power > 0 ? dyn_power : 0;
+	last_load = cpufreq_device->last_load ?: 1;
+	normalised_power = (dyn_power * 100) / last_load;
+	target_freq = cpu_power_to_freq(cpufreq_device, normalised_power);
+
+	*state = cpufreq_cooling_get_level(cpu, target_freq);
+	if (*state == THERMAL_CSTATE_INVALID) {
+		dev_warn_ratelimited(&cdev->device,
+				     "Failed to convert %dKHz for cpu %d into a cdev state\n",
+				     target_freq, cpu);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /* Bind cpufreq callbacks to thermal cooling device ops */
-static struct thermal_cooling_device_ops const cpufreq_cooling_ops = {
+static struct thermal_cooling_device_ops cpufreq_cooling_ops = {
 	.get_max_state = cpufreq_get_max_state,
 	.get_cur_state = cpufreq_get_cur_state,
 	.set_cur_state = cpufreq_set_cur_state,
@@ -311,6 +752,9 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table,
  * @np: a valid struct device_node to the cooling device device tree node
  * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
  * Normally this should be same as cpufreq policy->related_cpus.
+ * @capacitance: dynamic power coefficient for these cpus
+ * @plat_static_func: function to calculate the static power consumed by these
+ *                    cpus (optional)
  *
  * This interface function registers the cpufreq cooling device with the name
  * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
@@ -322,13 +766,14 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table,
  */
 static struct thermal_cooling_device *
 __cpufreq_cooling_register(struct device_node *np,
-			   const struct cpumask *clip_cpus)
+			const struct cpumask *clip_cpus, u32 capacitance,
+			get_static_t plat_static_func)
 {
 	struct thermal_cooling_device *cool_dev;
 	struct cpufreq_cooling_device *cpufreq_dev;
 	char dev_name[THERMAL_NAME_LENGTH];
 	struct cpufreq_frequency_table *pos, *table;
-	unsigned int freq, i;
+	unsigned int freq, i, num_cpus;
 	int ret;
 
 	table = cpufreq_frequency_get_table(cpumask_first(clip_cpus));
@@ -341,6 +786,23 @@ __cpufreq_cooling_register(struct device_node *np,
 	if (!cpufreq_dev)
 		return ERR_PTR(-ENOMEM);
 
+	num_cpus = cpumask_weight(clip_cpus);
+	cpufreq_dev->time_in_idle = kcalloc(num_cpus,
+					    sizeof(*cpufreq_dev->time_in_idle),
+					    GFP_KERNEL);
+	if (!cpufreq_dev->time_in_idle) {
+		cool_dev = ERR_PTR(-ENOMEM);
+		goto free_cdev;
+	}
+
+	cpufreq_dev->time_in_idle_timestamp =
+		kcalloc(num_cpus, sizeof(*cpufreq_dev->time_in_idle_timestamp),
+			GFP_KERNEL);
+	if (!cpufreq_dev->time_in_idle_timestamp) {
+		cool_dev = ERR_PTR(-ENOMEM);
+		goto free_time_in_idle;
+	}
+
 	/* Find max levels */
 	cpufreq_for_each_valid_entry(pos, table)
 		cpufreq_dev->max_level++;
@@ -349,7 +811,7 @@ __cpufreq_cooling_register(struct device_node *np,
 					  cpufreq_dev->max_level, GFP_KERNEL);
 	if (!cpufreq_dev->freq_table) {
 		cool_dev = ERR_PTR(-ENOMEM);
-		goto free_cdev;
+		goto free_time_in_idle_timestamp;
 	}
 
 	/* max_level is an index, not a counter */
@@ -357,6 +819,20 @@ __cpufreq_cooling_register(struct device_node *np,
 
 	cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus);
 
+	if (capacitance) {
+		cpufreq_cooling_ops.get_requested_power =
+			cpufreq_get_requested_power;
+		cpufreq_cooling_ops.state2power = cpufreq_state2power;
+		cpufreq_cooling_ops.power2state = cpufreq_power2state;
+		cpufreq_dev->plat_get_static_power = plat_static_func;
+
+		ret = build_dyn_power_table(cpufreq_dev, capacitance);
+		if (ret) {
+			cool_dev = ERR_PTR(ret);
+			goto free_table;
+		}
+	}
+
 	ret = get_idr(&cpufreq_idr, &cpufreq_dev->id);
 	if (ret) {
 		cool_dev = ERR_PTR(ret);
@@ -402,6 +878,10 @@ remove_idr:
 	release_idr(&cpufreq_idr, cpufreq_dev->id);
 free_table:
 	kfree(cpufreq_dev->freq_table);
+free_time_in_idle_timestamp:
+	kfree(cpufreq_dev->time_in_idle_timestamp);
+free_time_in_idle:
+	kfree(cpufreq_dev->time_in_idle);
 free_cdev:
 	kfree(cpufreq_dev);
 
@@ -422,7 +902,7 @@ free_cdev:
 struct thermal_cooling_device *
 cpufreq_cooling_register(const struct cpumask *clip_cpus)
 {
-	return __cpufreq_cooling_register(NULL, clip_cpus);
+	return __cpufreq_cooling_register(NULL, clip_cpus, 0, NULL);
 }
 EXPORT_SYMBOL_GPL(cpufreq_cooling_register);
 
@@ -446,11 +926,78 @@ of_cpufreq_cooling_register(struct device_node *np,
 	if (!np)
 		return ERR_PTR(-EINVAL);
 
-	return __cpufreq_cooling_register(np, clip_cpus);
+	return __cpufreq_cooling_register(np, clip_cpus, 0, NULL);
 }
 EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register);
 
 /**
+ * cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions
+ * @clip_cpus:	cpumask of cpus where the frequency constraints will happen
+ * @capacitance:	dynamic power coefficient for these cpus
+ * @plat_static_func:	function to calculate the static power consumed by these
+ *			cpus (optional)
+ *
+ * This interface function registers the cpufreq cooling device with
+ * the name "thermal-cpufreq-%x".  This api can support multiple
+ * instances of cpufreq cooling devices.  Using this function, the
+ * cooling device will implement the power extensions by using a
+ * simple cpu power model.  The cpus must have registered their OPPs
+ * using the OPP library.
+ *
+ * An optional @plat_static_func may be provided to calculate the
+ * static power consumed by these cpus.  If the platform's static
+ * power consumption is unknown or negligible, make it NULL.
+ *
+ * Return: a valid struct thermal_cooling_device pointer on success,
+ * on failure, it returns a corresponding ERR_PTR().
+ */
+struct thermal_cooling_device *
+cpufreq_power_cooling_register(const struct cpumask *clip_cpus, u32 capacitance,
+			       get_static_t plat_static_func)
+{
+	return __cpufreq_cooling_register(NULL, clip_cpus, capacitance,
+				plat_static_func);
+}
+EXPORT_SYMBOL(cpufreq_power_cooling_register);
+
+/**
+ * of_cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions
+ * @np:	a valid struct device_node to the cooling device device tree node
+ * @clip_cpus:	cpumask of cpus where the frequency constraints will happen
+ * @capacitance:	dynamic power coefficient for these cpus
+ * @plat_static_func:	function to calculate the static power consumed by these
+ *			cpus (optional)
+ *
+ * This interface function registers the cpufreq cooling device with
+ * the name "thermal-cpufreq-%x".  This api can support multiple
+ * instances of cpufreq cooling devices.  Using this API, the cpufreq
+ * cooling device will be linked to the device tree node provided.
+ * Using this function, the cooling device will implement the power
+ * extensions by using a simple cpu power model.  The cpus must have
+ * registered their OPPs using the OPP library.
+ *
+ * An optional @plat_static_func may be provided to calculate the
+ * static power consumed by these cpus.  If the platform's static
+ * power consumption is unknown or negligible, make it NULL.
+ *
+ * Return: a valid struct thermal_cooling_device pointer on success,
+ * on failure, it returns a corresponding ERR_PTR().
+ */
+struct thermal_cooling_device *
+of_cpufreq_power_cooling_register(struct device_node *np,
+				  const struct cpumask *clip_cpus,
+				  u32 capacitance,
+				  get_static_t plat_static_func)
+{
+	if (!np)
+		return ERR_PTR(-EINVAL);
+
+	return __cpufreq_cooling_register(np, clip_cpus, capacitance,
+				plat_static_func);
+}
+EXPORT_SYMBOL(of_cpufreq_power_cooling_register);
+
+/**
  * cpufreq_cooling_unregister - function to remove cpufreq cooling device.
  * @cdev: thermal cooling device pointer.
  *
@@ -475,6 +1022,8 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 
 	thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
 	release_idr(&cpufreq_idr, cpufreq_dev->id);
+	kfree(cpufreq_dev->time_in_idle_timestamp);
+	kfree(cpufreq_dev->time_in_idle);
 	kfree(cpufreq_dev->freq_table);
 	kfree(cpufreq_dev);
 }