1 files changed, 766 insertions, 0 deletions

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
new file mode 100644
index 000000000000..32f38b90c4f6
--- /dev/null
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -0,0 +1,766 @@
+/*
+ * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit)
+ *
+ *  Copyright (C) 2011 Samsung Electronics
+ *  Donggeun Kim <dg77.kim@samsung.com>
+ *  Amit Daniel Kachhap <amit.kachhap@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#include "exynos_thermal_common.h"
+#include "exynos_tmu.h"
+#include "exynos_tmu_data.h"
+
+/**
+ * struct exynos_tmu_data : A structure to hold the private data of the TMU
+	driver
+ * @id: identifier of the one instance of the TMU controller.
+ * @pdata: pointer to the tmu platform/configuration data
+ * @base: base address of the single instance of the TMU controller.
+ * @base_common: base address of the common registers of the TMU controller.
+ * @irq: irq number of the TMU controller.
+ * @soc: id of the SOC type.
+ * @irq_work: pointer to the irq work structure.
+ * @lock: lock to implement synchronization.
+ * @clk: pointer to the clock structure.
+ * @temp_error1: fused value of the first point trim.
+ * @temp_error2: fused value of the second point trim.
+ * @regulator: pointer to the TMU regulator structure.
+ * @reg_conf: pointer to structure to register with core thermal.
+ */
+struct exynos_tmu_data {
+	int id;
+	struct exynos_tmu_platform_data *pdata;
+	void __iomem *base;
+	void __iomem *base_common;
+	int irq;
+	enum soc_type soc;
+	struct work_struct irq_work;
+	struct mutex lock;
+	struct clk *clk;
+	u8 temp_error1, temp_error2;
+	struct regulator *regulator;
+	struct thermal_sensor_conf *reg_conf;
+};
+
+/*
+ * TMU treats temperature as a mapped temperature code.
+ * The temperature is converted differently depending on the calibration type.
+ */
+static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
+{
+	struct exynos_tmu_platform_data *pdata = data->pdata;
+	int temp_code;
+
+	if (pdata->cal_mode == HW_MODE)
+		return temp;
+
+	if (data->soc == SOC_ARCH_EXYNOS4210)
+		/* temp should range between 25 and 125 */
+		if (temp < 25 || temp > 125) {
+			temp_code = -EINVAL;
+			goto out;
+		}
+
+	switch (pdata->cal_type) {
+	case TYPE_TWO_POINT_TRIMMING:
+		temp_code = (temp - pdata->first_point_trim) *
+			(data->temp_error2 - data->temp_error1) /
+			(pdata->second_point_trim - pdata->first_point_trim) +
+			data->temp_error1;
+		break;
+	case TYPE_ONE_POINT_TRIMMING:
+		temp_code = temp + data->temp_error1 - pdata->first_point_trim;
+		break;
+	default:
+		temp_code = temp + pdata->default_temp_offset;
+		break;
+	}
+out:
+	return temp_code;
+}
+
+/*
+ * Calculate a temperature value from a temperature code.
+ * The unit of the temperature is degree Celsius.
+ */
+static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
+{
+	struct exynos_tmu_platform_data *pdata = data->pdata;
+	int temp;
+
+	if (pdata->cal_mode == HW_MODE)
+		return temp_code;
+
+	if (data->soc == SOC_ARCH_EXYNOS4210)
+		/* temp_code should range between 75 and 175 */
+		if (temp_code < 75 || temp_code > 175) {
+			temp = -ENODATA;
+			goto out;
+		}
+
+	switch (pdata->cal_type) {
+	case TYPE_TWO_POINT_TRIMMING:
+		temp = (temp_code - data->temp_error1) *
+			(pdata->second_point_trim - pdata->first_point_trim) /
+			(data->temp_error2 - data->temp_error1) +
+			pdata->first_point_trim;
+		break;
+	case TYPE_ONE_POINT_TRIMMING:
+		temp = temp_code - data->temp_error1 + pdata->first_point_trim;
+		break;
+	default:
+		temp = temp_code - pdata->default_temp_offset;
+		break;
+	}
+out:
+	return temp;
+}
+
+static int exynos_tmu_initialize(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct exynos_tmu_platform_data *pdata = data->pdata;
+	const struct exynos_tmu_registers *reg = pdata->registers;
+	unsigned int status, trim_info = 0, con;
+	unsigned int rising_threshold = 0, falling_threshold = 0;
+	int ret = 0, threshold_code, i, trigger_levs = 0;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	if (TMU_SUPPORTS(pdata, READY_STATUS)) {
+		status = readb(data->base + reg->tmu_status);
+		if (!status) {
+			ret = -EBUSY;
+			goto out;
+		}
+	}
+
+	if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
+		__raw_writel(1, data->base + reg->triminfo_ctrl);
+
+	if (pdata->cal_mode == HW_MODE)
+		goto skip_calib_data;
+
+	/* Save trimming info in order to perform calibration */
+	if (data->soc == SOC_ARCH_EXYNOS5440) {
+		/*
+		 * For exynos5440 soc triminfo value is swapped between TMU0 and
+		 * TMU2, so the below logic is needed.
+		 */
+		switch (data->id) {
+		case 0:
+			trim_info = readl(data->base +
+			EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
+			break;
+		case 1:
+			trim_info = readl(data->base + reg->triminfo_data);
+			break;
+		case 2:
+			trim_info = readl(data->base -
+			EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
+		}
+	} else {
+		trim_info = readl(data->base + reg->triminfo_data);
+	}
+	data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
+	data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
+				EXYNOS_TMU_TEMP_MASK);
+
+	if (!data->temp_error1 ||
+		(pdata->min_efuse_value > data->temp_error1) ||
+		(data->temp_error1 > pdata->max_efuse_value))
+		data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
+
+	if (!data->temp_error2)
+		data->temp_error2 =
+			(pdata->efuse_value >> reg->triminfo_85_shift) &
+			EXYNOS_TMU_TEMP_MASK;
+
+skip_calib_data:
+	if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
+		dev_err(&pdev->dev, "Invalid max trigger level\n");
+		goto out;
+	}
+
+	for (i = 0; i < pdata->max_trigger_level; i++) {
+		if (!pdata->trigger_levels[i])
+			continue;
+
+		if ((pdata->trigger_type[i] == HW_TRIP) &&
+		(!pdata->trigger_levels[pdata->max_trigger_level - 1])) {
+			dev_err(&pdev->dev, "Invalid hw trigger level\n");
+			ret = -EINVAL;
+			goto out;
+		}
+
+		/* Count trigger levels except the HW trip*/
+		if (!(pdata->trigger_type[i] == HW_TRIP))
+			trigger_levs++;
+	}
+
+	if (data->soc == SOC_ARCH_EXYNOS4210) {
+		/* Write temperature code for threshold */
+		threshold_code = temp_to_code(data, pdata->threshold);
+		if (threshold_code < 0) {
+			ret = threshold_code;
+			goto out;
+		}
+		writeb(threshold_code,
+			data->base + reg->threshold_temp);
+		for (i = 0; i < trigger_levs; i++)
+			writeb(pdata->trigger_levels[i], data->base +
+			reg->threshold_th0 + i * sizeof(reg->threshold_th0));
+
+		writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
+	} else {
+		/* Write temperature code for rising and falling threshold */
+		for (i = 0;
+		i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) {
+			threshold_code = temp_to_code(data,
+						pdata->trigger_levels[i]);
+			if (threshold_code < 0) {
+				ret = threshold_code;
+				goto out;
+			}
+			rising_threshold |= threshold_code << 8 * i;
+			if (pdata->threshold_falling) {
+				threshold_code = temp_to_code(data,
+						pdata->trigger_levels[i] -
+						pdata->threshold_falling);
+				if (threshold_code > 0)
+					falling_threshold |=
+						threshold_code << 8 * i;
+			}
+		}
+
+		writel(rising_threshold,
+				data->base + reg->threshold_th0);
+		writel(falling_threshold,
+				data->base + reg->threshold_th1);
+
+		writel((reg->inten_rise_mask << reg->inten_rise_shift) |
+			(reg->inten_fall_mask << reg->inten_fall_shift),
+				data->base + reg->tmu_intclear);
+
+		/* if last threshold limit is also present */
+		i = pdata->max_trigger_level - 1;
+		if (pdata->trigger_levels[i] &&
+				(pdata->trigger_type[i] == HW_TRIP)) {
+			threshold_code = temp_to_code(data,
+						pdata->trigger_levels[i]);
+			if (threshold_code < 0) {
+				ret = threshold_code;
+				goto out;
+			}
+			if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
+				/* 1-4 level to be assigned in th0 reg */
+				rising_threshold |= threshold_code << 8 * i;
+				writel(rising_threshold,
+					data->base + reg->threshold_th0);
+			} else if (i == EXYNOS_MAX_TRIGGER_PER_REG) {
+				/* 5th level to be assigned in th2 reg */
+				rising_threshold =
+				threshold_code << reg->threshold_th3_l0_shift;
+				writel(rising_threshold,
+					data->base + reg->threshold_th2);
+			}
+			con = readl(data->base + reg->tmu_ctrl);
+			con |= (1 << reg->therm_trip_en_shift);
+			writel(con, data->base + reg->tmu_ctrl);
+		}
+	}
+	/*Clear the PMIN in the common TMU register*/
+	if (reg->tmu_pmin && !data->id)
+		writel(0, data->base_common + reg->tmu_pmin);
+out:
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static void exynos_tmu_control(struct platform_device *pdev, bool on)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct exynos_tmu_platform_data *pdata = data->pdata;
+	const struct exynos_tmu_registers *reg = pdata->registers;
+	unsigned int con, interrupt_en, cal_val;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	con = readl(data->base + reg->tmu_ctrl);
+
+	if (pdata->test_mux)
+		con |= (pdata->test_mux << reg->test_mux_addr_shift);
+
+	if (pdata->reference_voltage) {
+		con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
+		con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
+	}
+
+	if (pdata->gain) {
+		con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift);
+		con |= (pdata->gain << reg->buf_slope_sel_shift);
+	}
+
+	if (pdata->noise_cancel_mode) {
+		con &= ~(reg->therm_trip_mode_mask <<
+					reg->therm_trip_mode_shift);
+		con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
+	}
+
+	if (pdata->cal_mode == HW_MODE) {
+		con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
+		cal_val = 0;
+		switch (pdata->cal_type) {
+		case TYPE_TWO_POINT_TRIMMING:
+			cal_val = 3;
+			break;
+		case TYPE_ONE_POINT_TRIMMING_85:
+			cal_val = 2;
+			break;
+		case TYPE_ONE_POINT_TRIMMING_25:
+			cal_val = 1;
+			break;
+		case TYPE_NONE:
+			break;
+		default:
+			dev_err(&pdev->dev, "Invalid calibration type, using none\n");
+		}
+		con |= cal_val << reg->calib_mode_shift;
+	}
+
+	if (on) {
+		con |= (1 << reg->core_en_shift);
+		interrupt_en =
+			pdata->trigger_enable[3] << reg->inten_rise3_shift |
+			pdata->trigger_enable[2] << reg->inten_rise2_shift |
+			pdata->trigger_enable[1] << reg->inten_rise1_shift |
+			pdata->trigger_enable[0] << reg->inten_rise0_shift;
+		if (TMU_SUPPORTS(pdata, FALLING_TRIP))
+			interrupt_en |=
+				interrupt_en << reg->inten_fall0_shift;
+	} else {
+		con &= ~(1 << reg->core_en_shift);
+		interrupt_en = 0; /* Disable all interrupts */
+	}
+	writel(interrupt_en, data->base + reg->tmu_inten);
+	writel(con, data->base + reg->tmu_ctrl);
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+}
+
+static int exynos_tmu_read(struct exynos_tmu_data *data)
+{
+	struct exynos_tmu_platform_data *pdata = data->pdata;
+	const struct exynos_tmu_registers *reg = pdata->registers;
+	u8 temp_code;
+	int temp;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	temp_code = readb(data->base + reg->tmu_cur_temp);
+	temp = code_to_temp(data, temp_code);
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+
+	return temp;
+}
+
+#ifdef CONFIG_THERMAL_EMULATION
+static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
+{
+	struct exynos_tmu_data *data = drv_data;
+	struct exynos_tmu_platform_data *pdata = data->pdata;
+	const struct exynos_tmu_registers *reg = pdata->registers;
+	unsigned int val;
+	int ret = -EINVAL;
+
+	if (!TMU_SUPPORTS(pdata, EMULATION))
+		goto out;
+
+	if (temp && temp < MCELSIUS)
+		goto out;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	val = readl(data->base + reg->emul_con);
+
+	if (temp) {
+		temp /= MCELSIUS;
+
+		if (TMU_SUPPORTS(pdata, EMUL_TIME)) {
+			val &= ~(EXYNOS_EMUL_TIME_MASK << reg->emul_time_shift);
+			val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift);
+		}
+		val &= ~(EXYNOS_EMUL_DATA_MASK << reg->emul_temp_shift);
+		val |= (temp_to_code(data, temp) << reg->emul_temp_shift) |
+			EXYNOS_EMUL_ENABLE;
+	} else {
+		val &= ~EXYNOS_EMUL_ENABLE;
+	}
+
+	writel(val, data->base + reg->emul_con);
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+	return 0;
+out:
+	return ret;
+}
+#else
+static int exynos_tmu_set_emulation(void *drv_data,	unsigned long temp)
+	{ return -EINVAL; }
+#endif/*CONFIG_THERMAL_EMULATION*/
+
+static void exynos_tmu_work(struct work_struct *work)
+{
+	struct exynos_tmu_data *data = container_of(work,
+			struct exynos_tmu_data, irq_work);
+	struct exynos_tmu_platform_data *pdata = data->pdata;
+	const struct exynos_tmu_registers *reg = pdata->registers;
+	unsigned int val_irq, val_type;
+
+	/* Find which sensor generated this interrupt */
+	if (reg->tmu_irqstatus) {
+		val_type = readl(data->base_common + reg->tmu_irqstatus);
+		if (!((val_type >> data->id) & 0x1))
+			goto out;
+	}
+
+	exynos_report_trigger(data->reg_conf);
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	/* TODO: take action based on particular interrupt */
+	val_irq = readl(data->base + reg->tmu_intstat);
+	/* clear the interrupts */
+	writel(val_irq, data->base + reg->tmu_intclear);
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+out:
+	enable_irq(data->irq);
+}
+
+static irqreturn_t exynos_tmu_irq(int irq, void *id)
+{
+	struct exynos_tmu_data *data = id;
+
+	disable_irq_nosync(irq);
+	schedule_work(&data->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id exynos_tmu_match[] = {
+	{
+		.compatible = "samsung,exynos4210-tmu",
+		.data = (void *)EXYNOS4210_TMU_DRV_DATA,
+	},
+	{
+		.compatible = "samsung,exynos4412-tmu",
+		.data = (void *)EXYNOS4412_TMU_DRV_DATA,
+	},
+	{
+		.compatible = "samsung,exynos5250-tmu",
+		.data = (void *)EXYNOS5250_TMU_DRV_DATA,
+	},
+	{
+		.compatible = "samsung,exynos5440-tmu",
+		.data = (void *)EXYNOS5440_TMU_DRV_DATA,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_tmu_match);
+
+static inline struct  exynos_tmu_platform_data *exynos_get_driver_data(
+			struct platform_device *pdev, int id)
+{
+	struct  exynos_tmu_init_data *data_table;
+	struct exynos_tmu_platform_data *tmu_data;
+	const struct of_device_id *match;
+
+	match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
+	if (!match)
+		return NULL;
+	data_table = (struct exynos_tmu_init_data *) match->data;
+	if (!data_table || id >= data_table->tmu_count)
+		return NULL;
+	tmu_data = data_table->tmu_data;
+	return (struct exynos_tmu_platform_data *) (tmu_data + id);
+}
+
+static int exynos_map_dt_data(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct exynos_tmu_platform_data *pdata;
+	struct resource res;
+	int ret;
+
+	if (!data || !pdev->dev.of_node)
+		return -ENODEV;
+
+	/*
+	 * Try enabling the regulator if found
+	 * TODO: Add regulator as an SOC feature, so that regulator enable
+	 * is a compulsory call.
+	 */
+	data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
+	if (!IS_ERR(data->regulator)) {
+		ret = regulator_enable(data->regulator);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to enable vtmu\n");
+			return ret;
+		}
+	} else {
+		dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
+	}
+
+	data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
+	if (data->id < 0)
+		data->id = 0;
+
+	data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (data->irq <= 0) {
+		dev_err(&pdev->dev, "failed to get IRQ\n");
+		return -ENODEV;
+	}
+
+	if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
+		dev_err(&pdev->dev, "failed to get Resource 0\n");
+		return -ENODEV;
+	}
+
+	data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
+	if (!data->base) {
+		dev_err(&pdev->dev, "Failed to ioremap memory\n");
+		return -EADDRNOTAVAIL;
+	}
+
+	pdata = exynos_get_driver_data(pdev, data->id);
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform init data supplied.\n");
+		return -ENODEV;
+	}
+	data->pdata = pdata;
+	/*
+	 * Check if the TMU shares some registers and then try to map the
+	 * memory of common registers.
+	 */
+	if (!TMU_SUPPORTS(pdata, SHARED_MEMORY))
+		return 0;
+
+	if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
+		dev_err(&pdev->dev, "failed to get Resource 1\n");
+		return -ENODEV;
+	}
+
+	data->base_common = devm_ioremap(&pdev->dev, res.start,
+					resource_size(&res));
+	if (!data->base_common) {
+		dev_err(&pdev->dev, "Failed to ioremap memory\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int exynos_tmu_probe(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data;
+	struct exynos_tmu_platform_data *pdata;
+	struct thermal_sensor_conf *sensor_conf;
+	int ret, i;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
+					GFP_KERNEL);
+	if (!data) {
+		dev_err(&pdev->dev, "Failed to allocate driver structure\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, data);
+	mutex_init(&data->lock);
+
+	ret = exynos_map_dt_data(pdev);
+	if (ret)
+		return ret;
+
+	pdata = data->pdata;
+
+	INIT_WORK(&data->irq_work, exynos_tmu_work);
+
+	data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
+	if (IS_ERR(data->clk)) {
+		dev_err(&pdev->dev, "Failed to get clock\n");
+		return  PTR_ERR(data->clk);
+	}
+
+	ret = clk_prepare(data->clk);
+	if (ret)
+		return ret;
+
+	if (pdata->type == SOC_ARCH_EXYNOS4210 ||
+	    pdata->type == SOC_ARCH_EXYNOS4412 ||
+	    pdata->type == SOC_ARCH_EXYNOS5250 ||
+	    pdata->type == SOC_ARCH_EXYNOS5440)
+		data->soc = pdata->type;
+	else {
+		ret = -EINVAL;
+		dev_err(&pdev->dev, "Platform not supported\n");
+		goto err_clk;
+	}
+
+	ret = exynos_tmu_initialize(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize TMU\n");
+		goto err_clk;
+	}
+
+	exynos_tmu_control(pdev, true);
+
+	/* Allocate a structure to register with the exynos core thermal */
+	sensor_conf = devm_kzalloc(&pdev->dev,
+				sizeof(struct thermal_sensor_conf), GFP_KERNEL);
+	if (!sensor_conf) {
+		dev_err(&pdev->dev, "Failed to allocate registration struct\n");
+		ret = -ENOMEM;
+		goto err_clk;
+	}
+	sprintf(sensor_conf->name, "therm_zone%d", data->id);
+	sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read;
+	sensor_conf->write_emul_temp =
+		(int (*)(void *, unsigned long))exynos_tmu_set_emulation;
+	sensor_conf->driver_data = data;
+	sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] +
+			pdata->trigger_enable[1] + pdata->trigger_enable[2]+
+			pdata->trigger_enable[3];
+
+	for (i = 0; i < sensor_conf->trip_data.trip_count; i++) {
+		sensor_conf->trip_data.trip_val[i] =
+			pdata->threshold + pdata->trigger_levels[i];
+		sensor_conf->trip_data.trip_type[i] =
+					pdata->trigger_type[i];
+	}
+
+	sensor_conf->trip_data.trigger_falling = pdata->threshold_falling;
+
+	sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count;
+	for (i = 0; i < pdata->freq_tab_count; i++) {
+		sensor_conf->cooling_data.freq_data[i].freq_clip_max =
+					pdata->freq_tab[i].freq_clip_max;
+		sensor_conf->cooling_data.freq_data[i].temp_level =
+					pdata->freq_tab[i].temp_level;
+	}
+	sensor_conf->dev = &pdev->dev;
+	/* Register the sensor with thermal management interface */
+	ret = exynos_register_thermal(sensor_conf);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register thermal interface\n");
+		goto err_clk;
+	}
+	data->reg_conf = sensor_conf;
+
+	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
+		IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
+		goto err_clk;
+	}
+
+	return 0;
+err_clk:
+	clk_unprepare(data->clk);
+	return ret;
+}
+
+static int exynos_tmu_remove(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+
+	exynos_tmu_control(pdev, false);
+
+	exynos_unregister_thermal(data->reg_conf);
+
+	clk_unprepare(data->clk);
+
+	if (!IS_ERR(data->regulator))
+		regulator_disable(data->regulator);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_tmu_suspend(struct device *dev)
+{
+	exynos_tmu_control(to_platform_device(dev), false);
+
+	return 0;
+}
+
+static int exynos_tmu_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	exynos_tmu_initialize(pdev);
+	exynos_tmu_control(pdev, true);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
+			 exynos_tmu_suspend, exynos_tmu_resume);
+#define EXYNOS_TMU_PM	(&exynos_tmu_pm)
+#else
+#define EXYNOS_TMU_PM	NULL
+#endif
+
+static struct platform_driver exynos_tmu_driver = {
+	.driver = {
+		.name   = "exynos-tmu",
+		.owner  = THIS_MODULE,
+		.pm     = EXYNOS_TMU_PM,
+		.of_match_table = exynos_tmu_match,
+	},
+	.probe = exynos_tmu_probe,
+	.remove	= exynos_tmu_remove,
+};
+
+module_platform_driver(exynos_tmu_driver);
+
+MODULE_DESCRIPTION("EXYNOS TMU Driver");
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:exynos-tmu");