diff options
Diffstat (limited to 'drivers/tty/serial/8250')
| -rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 34 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_men_mcb.c | 125 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_of.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 11 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 3 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 36 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/Kconfig | 5 |
7 files changed, 163 insertions, 52 deletions
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index cd1b94a0f451..6fcdb90f616a 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -9,6 +9,7 @@ * LCR is written whilst busy. If it is, then a busy detect interrupt is * raised, the LCR needs to be rewritten and the uart status register read. */ +#include <linux/delay.h> #include <linux/device.h> #include <linux/io.h> #include <linux/module.h> @@ -119,10 +120,27 @@ static void dw8250_check_lcr(struct uart_port *p, int value) */ } +/* Returns once the transmitter is empty or we run out of retries */ +static void dw8250_tx_wait_empty(struct uart_port *p, int tries) +{ + unsigned int lsr; + + while (tries--) { + lsr = readb (p->membase + (UART_LSR << p->regshift)); + if (lsr & UART_LSR_TEMT) + break; + udelay (10); + } +} + static void dw8250_serial_out(struct uart_port *p, int offset, int value) { struct dw8250_data *d = p->private_data; + /* Allow the TX to drain before we reconfigure */ + if (offset == UART_LCR) + dw8250_tx_wait_empty(p, 1000); + writeb(value, p->membase + (offset << p->regshift)); if (offset == UART_LCR && !d->uart_16550_compatible) @@ -339,17 +357,11 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) p->serial_in = dw8250_serial_in32be; p->serial_out = dw8250_serial_out32be; } - } else if (has_acpi_companion(p->dev)) { - const struct acpi_device_id *id; - - id = acpi_match_device(p->dev->driver->acpi_match_table, - p->dev); - if (id && !strcmp(id->id, "APMC0D08")) { - p->iotype = UPIO_MEM32; - p->regshift = 2; - p->serial_in = dw8250_serial_in32; - data->uart_16550_compatible = true; - } + } else if (acpi_dev_present("APMC0D08", NULL, -1)) { + p->iotype = UPIO_MEM32; + p->regshift = 2; + p->serial_in = dw8250_serial_in32; + data->uart_16550_compatible = true; } /* Platforms with iDMA */ diff --git a/drivers/tty/serial/8250/8250_men_mcb.c b/drivers/tty/serial/8250/8250_men_mcb.c index 308977807994..127017cc41d9 100644 --- a/drivers/tty/serial/8250/8250_men_mcb.c +++ b/drivers/tty/serial/8250/8250_men_mcb.c @@ -1,12 +1,19 @@ #include <linux/device.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/io.h> #include <linux/mcb.h> #include <linux/serial.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <uapi/linux/serial_core.h> +#define MEN_UART_ID_Z025 0x19 +#define MEN_UART_ID_Z057 0x39 +#define MEN_UART_ID_Z125 0x7d + +#define MEN_UART_MEM_SIZE 0x10 + struct serial_8250_men_mcb_data { struct uart_8250_port uart; int line; @@ -18,7 +25,7 @@ struct serial_8250_men_mcb_data { * parameter in order to really set the correct baudrate, and * do so if possible without user interaction */ -static u32 men_z125_lookup_uartclk(struct mcb_device *mdev) +static u32 men_lookup_uartclk(struct mcb_device *mdev) { /* use default value if board is not available below */ u32 clkval = 1041666; @@ -28,10 +35,12 @@ static u32 men_z125_lookup_uartclk(struct mcb_device *mdev) mdev->bus->name); if (strncmp(mdev->bus->name, "F075", 4) == 0) clkval = 1041666; - else if (strncmp(mdev->bus->name, "F216", 4) == 0) + else if (strncmp(mdev->bus->name, "F216", 4) == 0) clkval = 1843200; else if (strncmp(mdev->bus->name, "G215", 4) == 0) clkval = 1843200; + else if (strncmp(mdev->bus->name, "F210", 4) == 0) + clkval = 115200; else dev_info(&mdev->dev, "board not detected, using default uartclk\n"); @@ -41,62 +50,108 @@ static u32 men_z125_lookup_uartclk(struct mcb_device *mdev) return clkval; } +static unsigned int get_num_ports(struct mcb_device *mdev, + void __iomem *membase) +{ + switch (mdev->id) { + case MEN_UART_ID_Z125: + return 1U; + case MEN_UART_ID_Z025: + return readb(membase) >> 4; + case MEN_UART_ID_Z057: + return 4U; + default: + dev_err(&mdev->dev, "no supported device!\n"); + return -ENODEV; + } +} + static int serial_8250_men_mcb_probe(struct mcb_device *mdev, const struct mcb_device_id *id) { struct serial_8250_men_mcb_data *data; struct resource *mem; - - data = devm_kzalloc(&mdev->dev, - sizeof(struct serial_8250_men_mcb_data), - GFP_KERNEL); - if (!data) - return -ENOMEM; - - mcb_set_drvdata(mdev, data); - data->uart.port.dev = mdev->dma_dev; - spin_lock_init(&data->uart.port.lock); - - data->uart.port.type = PORT_16550; - data->uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; - data->uart.port.iotype = UPIO_MEM; - data->uart.port.uartclk = men_z125_lookup_uartclk(mdev); - data->uart.port.regshift = 0; - data->uart.port.fifosize = 60; + unsigned int num_ports; + unsigned int i; + void __iomem *membase; mem = mcb_get_resource(mdev, IORESOURCE_MEM); if (mem == NULL) return -ENXIO; + membase = devm_ioremap_resource(&mdev->dev, mem); + if (IS_ERR(membase)) + return PTR_ERR_OR_ZERO(membase); - data->uart.port.irq = mcb_get_irq(mdev); + num_ports = get_num_ports(mdev, membase); - data->uart.port.membase = devm_ioremap_resource(&mdev->dev, mem); - if (IS_ERR(data->uart.port.membase)) - return PTR_ERR_OR_ZERO(data->uart.port.membase); + dev_dbg(&mdev->dev, "found a 16z%03u with %u ports\n", + mdev->id, num_ports); - data->uart.port.mapbase = (unsigned long) mem->start; - data->uart.port.iobase = data->uart.port.mapbase; + if (num_ports == 0 || num_ports > 4) { + dev_err(&mdev->dev, "unexpected number of ports: %u\n", + num_ports); + return -ENODEV; + } - /* ok, register the port */ - data->line = serial8250_register_8250_port(&data->uart); - if (data->line < 0) - return data->line; + data = devm_kcalloc(&mdev->dev, num_ports, + sizeof(struct serial_8250_men_mcb_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; - dev_info(&mdev->dev, "found 16Z125 UART: ttyS%d\n", data->line); + mcb_set_drvdata(mdev, data); + + for (i = 0; i < num_ports; i++) { + data[i].uart.port.dev = mdev->dma_dev; + spin_lock_init(&data[i].uart.port.lock); + + data[i].uart.port.type = PORT_16550; + data[i].uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ + | UPF_FIXED_TYPE; + data[i].uart.port.iotype = UPIO_MEM; + data[i].uart.port.uartclk = men_lookup_uartclk(mdev); + data[i].uart.port.regshift = 0; + data[i].uart.port.irq = mcb_get_irq(mdev); + data[i].uart.port.membase = membase; + data[i].uart.port.fifosize = 60; + data[i].uart.port.mapbase = (unsigned long) mem->start + + i * MEN_UART_MEM_SIZE; + data[i].uart.port.iobase = data[i].uart.port.mapbase; + + /* ok, register the port */ + data[i].line = serial8250_register_8250_port(&data[i].uart); + if (data[i].line < 0) { + dev_err(&mdev->dev, "unable to register UART port\n"); + return data[i].line; + } + dev_info(&mdev->dev, "found MCB UART: ttyS%d\n", data[i].line); + } return 0; } static void serial_8250_men_mcb_remove(struct mcb_device *mdev) { + unsigned int num_ports, i; struct serial_8250_men_mcb_data *data = mcb_get_drvdata(mdev); - if (data) - serial8250_unregister_port(data->line); + if (!data) + return; + + num_ports = get_num_ports(mdev, data[0].uart.port.membase); + if (num_ports < 0 || num_ports > 4) { + dev_err(&mdev->dev, "error retrieving number of ports!\n"); + return; + } + + for (i = 0; i < num_ports; i++) + serial8250_unregister_port(data[i].line); } static const struct mcb_device_id serial_8250_men_mcb_ids[] = { - { .device = 0x7d }, + { .device = MEN_UART_ID_Z025 }, + { .device = MEN_UART_ID_Z057 }, + { .device = MEN_UART_ID_Z125 }, { } }; MODULE_DEVICE_TABLE(mcb, serial_8250_men_mcb_ids); @@ -113,6 +168,8 @@ static struct mcb_driver mcb_driver = { module_mcb_driver(mcb_driver); MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("MEN 16z125 8250 UART driver"); +MODULE_DESCRIPTION("MEN 8250 UART driver"); MODULE_AUTHOR("Michael Moese <michael.moese@men.de"); MODULE_ALIAS("mcb:16z125"); +MODULE_ALIAS("mcb:16z025"); +MODULE_ALIAS("mcb:16z057"); diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 160b8906d9b9..9835b1c1cbe1 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -316,6 +316,7 @@ static const struct of_device_id of_platform_serial_table[] = { { .compatible = "mrvl,mmp-uart", .data = (void *)PORT_XSCALE, }, { .compatible = "ti,da830-uart", .data = (void *)PORT_DA830, }, + { .compatible = "nuvoton,npcm750-uart", .data = (void *)PORT_NPCM, }, { /* end of list */ }, }; MODULE_DEVICE_TABLE(of, of_platform_serial_table); diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 57f6eba47f44..624b501fd253 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -114,6 +114,7 @@ struct omap8250_priv { struct uart_8250_dma omap8250_dma; spinlock_t rx_dma_lock; bool rx_dma_broken; + bool throttled; }; #ifdef CONFIG_SERIAL_8250_DMA @@ -692,6 +693,7 @@ static void omap_8250_shutdown(struct uart_port *port) static void omap_8250_throttle(struct uart_port *port) { + struct omap8250_priv *priv = port->private_data; struct uart_8250_port *up = up_to_u8250p(port); unsigned long flags; @@ -700,6 +702,7 @@ static void omap_8250_throttle(struct uart_port *port) spin_lock_irqsave(&port->lock, flags); up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); serial_out(up, UART_IER, up->ier); + priv->throttled = true; spin_unlock_irqrestore(&port->lock, flags); pm_runtime_mark_last_busy(port->dev); @@ -738,12 +741,16 @@ static int omap_8250_rs485_config(struct uart_port *port, static void omap_8250_unthrottle(struct uart_port *port) { + struct omap8250_priv *priv = port->private_data; struct uart_8250_port *up = up_to_u8250p(port); unsigned long flags; pm_runtime_get_sync(port->dev); spin_lock_irqsave(&port->lock, flags); + priv->throttled = false; + if (up->dma) + up->dma->rx_dma(up); up->ier |= UART_IER_RLSI | UART_IER_RDI; serial_out(up, UART_IER, up->ier); spin_unlock_irqrestore(&port->lock, flags); @@ -788,6 +795,7 @@ unlock: static void __dma_rx_complete(void *param) { struct uart_8250_port *p = param; + struct omap8250_priv *priv = p->port.private_data; struct uart_8250_dma *dma = p->dma; struct dma_tx_state state; unsigned long flags; @@ -805,7 +813,8 @@ static void __dma_rx_complete(void *param) return; } __dma_rx_do_complete(p); - omap_8250_rx_dma(p); + if (!priv->throttled) + omap_8250_rx_dma(p); spin_unlock_irqrestore(&p->port.lock, flags); } diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index a93f77ab3da0..3296a05cda2d 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1685,9 +1685,6 @@ pci_wch_ch38x_setup(struct serial_private *priv, #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e -#define PCI_VENDOR_ID_SUNIX 0x1fd4 -#define PCI_DEVICE_ID_SUNIX_1999 0x1999 - #define PCIE_VENDOR_ID_WCH 0x1c00 #define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 #define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 1328c7e70108..95833cbc4338 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -47,6 +47,10 @@ #define UART_EXAR_SLEEP 0x8b /* Sleep mode */ #define UART_EXAR_DVID 0x8d /* Device identification */ +/* Nuvoton NPCM timeout register */ +#define UART_NPCM_TOR 7 +#define UART_NPCM_TOIE BIT(7) /* Timeout Interrupt Enable */ + /* * Debugging. */ @@ -293,6 +297,15 @@ static const struct serial8250_config uart_config[] = { UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, .flags = UART_CAP_FIFO, }, + [PORT_NPCM] = { + .name = "Nuvoton 16550", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ @@ -1854,7 +1867,8 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) status = serial_port_in(port, UART_LSR); - if (status & (UART_LSR_DR | UART_LSR_BI)) { + if (status & (UART_LSR_DR | UART_LSR_BI) && + iir & UART_IIR_RDI) { if (!up->dma || handle_rx_dma(up, iir)) status = serial8250_rx_chars(up, status); } @@ -2140,6 +2154,15 @@ int serial8250_do_startup(struct uart_port *port) UART_DA830_PWREMU_MGMT_FREE); } + if (port->type == PORT_NPCM) { + /* + * Nuvoton calls the scratch register 'UART_TOR' (timeout + * register). Enable it, and set TIOC (timeout interrupt + * comparator) to be 0x20 for correct operation. + */ + serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20); + } + #ifdef CONFIG_SERIAL_8250_RSA /* * If this is an RSA port, see if we can kick it up to the @@ -2462,6 +2485,15 @@ static unsigned int xr17v35x_get_divisor(struct uart_8250_port *up, return quot_16 >> 4; } +/* Nuvoton NPCM UARTs have a custom divisor calculation */ +static unsigned int npcm_get_divisor(struct uart_8250_port *up, + unsigned int baud) +{ + struct uart_port *port = &up->port; + + return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2; +} + static unsigned int serial8250_get_divisor(struct uart_8250_port *up, unsigned int baud, unsigned int *frac) @@ -2482,6 +2514,8 @@ static unsigned int serial8250_get_divisor(struct uart_8250_port *up, quot = 0x8002; else if (up->port.type == PORT_XR17V35X) quot = xr17v35x_get_divisor(up, baud, frac); + else if (up->port.type == PORT_NPCM) + quot = npcm_get_divisor(up, baud); else quot = uart_get_divisor(port, baud); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 16b1496e6105..f005eaf8bc57 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -157,11 +157,12 @@ config SERIAL_8250_CS If unsure, say N. config SERIAL_8250_MEN_MCB - tristate "MEN Z125 UART device support" + tristate "MEN MCB UART device support" depends on MCB && SERIAL_8250 help This enables support for FPGA based UARTs found on many MEN - boards. This driver enables support for the Z125 UARTs. + boards. This driver enables support for the 16z025, 16z057 + and 16z125 UARTs. To compile this driver as a module, chose M here: the module will be called 8250_men_mcb. |