diff options
Diffstat (limited to 'drivers/tty/serial/cpm_uart')
| -rw-r--r-- | drivers/tty/serial/cpm_uart/Makefile | 11 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart.h | 147 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart_core.c | 1443 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c | 138 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h | 34 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c | 174 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h | 34 |
7 files changed, 1981 insertions, 0 deletions
diff --git a/drivers/tty/serial/cpm_uart/Makefile b/drivers/tty/serial/cpm_uart/Makefile new file mode 100644 index 000000000000..e072724ea754 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the Motorola 8xx FEC ethernet controller +# + +obj-$(CONFIG_SERIAL_CPM) += cpm_uart.o + +# Select the correct platform objects. +cpm_uart-objs-$(CONFIG_CPM2) += cpm_uart_cpm2.o +cpm_uart-objs-$(CONFIG_8xx) += cpm_uart_cpm1.o + +cpm_uart-objs := cpm_uart_core.o $(cpm_uart-objs-y) diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h new file mode 100644 index 000000000000..b754dcf0fda5 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart.h @@ -0,0 +1,147 @@ +/* + * linux/drivers/serial/cpm_uart.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ +#ifndef CPM_UART_H +#define CPM_UART_H + +#include <linux/platform_device.h> +#include <linux/fs_uart_pd.h> + +#if defined(CONFIG_CPM2) +#include "cpm_uart_cpm2.h" +#elif defined(CONFIG_8xx) +#include "cpm_uart_cpm1.h" +#endif + +#define SERIAL_CPM_MAJOR 204 +#define SERIAL_CPM_MINOR 46 + +#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC) +#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING) +#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */ +#define FLAG_SMC 0x00000002 +#define FLAG_CONSOLE 0x00000001 + +#define UART_SMC1 fsid_smc1_uart +#define UART_SMC2 fsid_smc2_uart +#define UART_SCC1 fsid_scc1_uart +#define UART_SCC2 fsid_scc2_uart +#define UART_SCC3 fsid_scc3_uart +#define UART_SCC4 fsid_scc4_uart + +#define UART_NR fs_uart_nr + +#define RX_NUM_FIFO 4 +#define RX_BUF_SIZE 32 +#define TX_NUM_FIFO 4 +#define TX_BUF_SIZE 32 + +#define SCC_WAIT_CLOSING 100 + +#define GPIO_CTS 0 +#define GPIO_RTS 1 +#define GPIO_DCD 2 +#define GPIO_DSR 3 +#define GPIO_DTR 4 +#define GPIO_RI 5 + +#define NUM_GPIOS (GPIO_RI+1) + +struct uart_cpm_port { + struct uart_port port; + u16 rx_nrfifos; + u16 rx_fifosize; + u16 tx_nrfifos; + u16 tx_fifosize; + smc_t __iomem *smcp; + smc_uart_t __iomem *smcup; + scc_t __iomem *sccp; + scc_uart_t __iomem *sccup; + cbd_t __iomem *rx_bd_base; + cbd_t __iomem *rx_cur; + cbd_t __iomem *tx_bd_base; + cbd_t __iomem *tx_cur; + unsigned char *tx_buf; + unsigned char *rx_buf; + u32 flags; + struct clk *clk; + u8 brg; + uint dp_addr; + void *mem_addr; + dma_addr_t dma_addr; + u32 mem_size; + /* wait on close if needed */ + int wait_closing; + /* value to combine with opcode to form cpm command */ + u32 command; + int gpios[NUM_GPIOS]; +}; + +extern int cpm_uart_nr; +extern struct uart_cpm_port cpm_uart_ports[UART_NR]; + +/* these are located in their respective files */ +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd); +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np); +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram); +int cpm_uart_init_portdesc(void); +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); +void cpm_uart_freebuf(struct uart_cpm_port *pinfo); + +void smc1_lineif(struct uart_cpm_port *pinfo); +void smc2_lineif(struct uart_cpm_port *pinfo); +void scc1_lineif(struct uart_cpm_port *pinfo); +void scc2_lineif(struct uart_cpm_port *pinfo); +void scc3_lineif(struct uart_cpm_port *pinfo); +void scc4_lineif(struct uart_cpm_port *pinfo); + +/* + virtual to phys transtalion +*/ +static inline unsigned long cpu2cpm_addr(void *addr, + struct uart_cpm_port *pinfo) +{ + int offset; + u32 val = (u32)addr; + u32 mem = (u32)pinfo->mem_addr; + /* sane check */ + if (likely(val >= mem && val < mem + pinfo->mem_size)) { + offset = val - mem; + return pinfo->dma_addr + offset; + } + /* something nasty happened */ + BUG(); + return 0; +} + +static inline void *cpm2cpu_addr(unsigned long addr, + struct uart_cpm_port *pinfo) +{ + int offset; + u32 val = addr; + u32 dma = (u32)pinfo->dma_addr; + /* sane check */ + if (likely(val >= dma && val < dma + pinfo->mem_size)) { + offset = val - dma; + return pinfo->mem_addr + offset; + } + /* something nasty happened */ + BUG(); + return NULL; +} + + +#endif /* CPM_UART_H */ diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c new file mode 100644 index 000000000000..8692ff98fc07 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -0,0 +1,1443 @@ +/* + * linux/drivers/serial/cpm_uart.c + * + * Driver for CPM (SCC/SMC) serial ports; core driver + * + * Based on arch/ppc/cpm2_io/uart.c by Dan Malek + * Based on ppc8xx.c by Thomas Gleixner + * Based on drivers/serial/amba.c by Russell King + * + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004, 2007 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * (C) 2005-2006 MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/module.h> +#include <linux/tty.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/device.h> +#include <linux/bootmem.h> +#include <linux/dma-mapping.h> +#include <linux/fs_uart_pd.h> +#include <linux/of_platform.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/clk.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/delay.h> +#include <asm/fs_pd.h> +#include <asm/udbg.h> + +#if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/serial_core.h> +#include <linux/kernel.h> + +#include "cpm_uart.h" + + +/**************************************************************/ + +static int cpm_uart_tx_pump(struct uart_port *port); +static void cpm_uart_init_smc(struct uart_cpm_port *pinfo); +static void cpm_uart_init_scc(struct uart_cpm_port *pinfo); +static void cpm_uart_initbd(struct uart_cpm_port *pinfo); + +/**************************************************************/ + +#define HW_BUF_SPD_THRESHOLD 9600 + +/* + * Check, if transmit buffers are processed +*/ +static unsigned int cpm_uart_tx_empty(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + cbd_t __iomem *bdp = pinfo->tx_bd_base; + int ret = 0; + + while (1) { + if (in_be16(&bdp->cbd_sc) & BD_SC_READY) + break; + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) { + ret = TIOCSER_TEMT; + break; + } + bdp++; + } + + pr_debug("CPM uart[%d]:tx_empty: %d\n", port->line, ret); + + return ret; +} + +static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (pinfo->gpios[GPIO_RTS] >= 0) + gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); + + if (pinfo->gpios[GPIO_DTR] >= 0) + gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR)); +} + +static unsigned int cpm_uart_get_mctrl(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + if (pinfo->gpios[GPIO_CTS] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_CTS])) + mctrl &= ~TIOCM_CTS; + } + + if (pinfo->gpios[GPIO_DSR] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DSR])) + mctrl &= ~TIOCM_DSR; + } + + if (pinfo->gpios[GPIO_DCD] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DCD])) + mctrl &= ~TIOCM_CAR; + } + + if (pinfo->gpios[GPIO_RI] >= 0) { + if (!gpio_get_value(pinfo->gpios[GPIO_RI])) + mctrl |= TIOCM_RNG; + } + + return mctrl; +} + +/* + * Stop transmitter + */ +static void cpm_uart_stop_tx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:stop tx\n", port->line); + + if (IS_SMC(pinfo)) + clrbits8(&smcp->smc_smcm, SMCM_TX); + else + clrbits16(&sccp->scc_sccm, UART_SCCM_TX); +} + +/* + * Start transmitter + */ +static void cpm_uart_start_tx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:start tx\n", port->line); + + if (IS_SMC(pinfo)) { + if (in_8(&smcp->smc_smcm) & SMCM_TX) + return; + } else { + if (in_be16(&sccp->scc_sccm) & UART_SCCM_TX) + return; + } + + if (cpm_uart_tx_pump(port) != 0) { + if (IS_SMC(pinfo)) { + setbits8(&smcp->smc_smcm, SMCM_TX); + } else { + setbits16(&sccp->scc_sccm, UART_SCCM_TX); + } + } +} + +/* + * Stop receiver + */ +static void cpm_uart_stop_rx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:stop rx\n", port->line); + + if (IS_SMC(pinfo)) + clrbits8(&smcp->smc_smcm, SMCM_RX); + else + clrbits16(&sccp->scc_sccm, UART_SCCM_RX); +} + +/* + * Enable Modem status interrupts + */ +static void cpm_uart_enable_ms(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:enable ms\n", port->line); +} + +/* + * Generate a break. + */ +static void cpm_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line, + break_state); + + if (break_state) + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + else + cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); +} + +/* + * Transmit characters, refill buffer descriptor, if possible + */ +static void cpm_uart_int_tx(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:TX INT\n", port->line); + + cpm_uart_tx_pump(port); +} + +#ifdef CONFIG_CONSOLE_POLL +static int serial_polled; +#endif + +/* + * Receive characters + */ +static void cpm_uart_int_rx(struct uart_port *port) +{ + int i; + unsigned char ch; + u8 *cp; + struct tty_struct *tty = port->state->port.tty; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + cbd_t __iomem *bdp; + u16 status; + unsigned int flg; + + pr_debug("CPM uart[%d]:RX INT\n", port->line); + + /* Just loop through the closed BDs and copy the characters into + * the buffer. + */ + bdp = pinfo->rx_cur; + for (;;) { +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return; + } +#endif + /* get status */ + status = in_be16(&bdp->cbd_sc); + /* If this one is empty, return happy */ + if (status & BD_SC_EMPTY) + break; + + /* get number of characters, and check spce in flip-buffer */ + i = in_be16(&bdp->cbd_datlen); + + /* If we have not enough room in tty flip buffer, then we try + * later, which will be the next rx-interrupt or a timeout + */ + if(tty_buffer_request_room(tty, i) < i) { + printk(KERN_WARNING "No room in flip buffer\n"); + return; + } + + /* get pointer */ + cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); + + /* loop through the buffer */ + while (i-- > 0) { + ch = *cp++; + port->icount.rx++; + flg = TTY_NORMAL; + + if (status & + (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) + goto handle_error; + if (uart_handle_sysrq_char(port, ch)) + continue; +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return; + } +#endif + error_return: + tty_insert_flip_char(tty, ch, flg); + + } /* End while (i--) */ + + /* This BD is ready to be used again. Clear status. get next */ + clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR | + BD_SC_OV | BD_SC_ID); + setbits16(&bdp->cbd_sc, BD_SC_EMPTY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = pinfo->rx_bd_base; + else + bdp++; + + } /* End for (;;) */ + + /* Write back buffer pointer */ + pinfo->rx_cur = bdp; + + /* activate BH processing */ + tty_flip_buffer_push(tty); + + return; + + /* Error processing */ + + handle_error: + /* Statistics */ + if (status & BD_SC_BR) + port->icount.brk++; + if (status & BD_SC_PR) + port->icount.parity++; + if (status & BD_SC_FR) + port->icount.frame++; + if (status & BD_SC_OV) + port->icount.overrun++; + + /* Mask out ignored conditions */ + status &= port->read_status_mask; + + /* Handle the remaining ones */ + if (status & BD_SC_BR) + flg = TTY_BREAK; + else if (status & BD_SC_PR) + flg = TTY_PARITY; + else if (status & BD_SC_FR) + flg = TTY_FRAME; + + /* overrun does not affect the current character ! */ + if (status & BD_SC_OV) { + ch = 0; + flg = TTY_OVERRUN; + /* We skip this buffer */ + /* CHECK: Is really nothing senseful there */ + /* ASSUMPTION: it contains nothing valid */ + i = 0; + } +#ifdef SUPPORT_SYSRQ + port->sysrq = 0; +#endif + goto error_return; +} + +/* + * Asynchron mode interrupt handler + */ +static irqreturn_t cpm_uart_int(int irq, void *data) +{ + u8 events; + struct uart_port *port = data; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:IRQ\n", port->line); + + if (IS_SMC(pinfo)) { + events = in_8(&smcp->smc_smce); + out_8(&smcp->smc_smce, events); + if (events & SMCM_BRKE) + uart_handle_break(port); + if (events & SMCM_RX) + cpm_uart_int_rx(port); + if (events & SMCM_TX) + cpm_uart_int_tx(port); + } else { + events = in_be16(&sccp->scc_scce); + out_be16(&sccp->scc_scce, events); + if (events & UART_SCCM_BRKE) + uart_handle_break(port); + if (events & UART_SCCM_RX) + cpm_uart_int_rx(port); + if (events & UART_SCCM_TX) + cpm_uart_int_tx(port); + } + return (events) ? IRQ_HANDLED : IRQ_NONE; +} + +static int cpm_uart_startup(struct uart_port *port) +{ + int retval; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + pr_debug("CPM uart[%d]:startup\n", port->line); + + /* If the port is not the console, make sure rx is disabled. */ + if (!(pinfo->flags & FLAG_CONSOLE)) { + /* Disable UART rx */ + if (IS_SMC(pinfo)) { + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN); + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX); + } else { + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR); + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); + } + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + } + /* Install interrupt handler. */ + retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port); + if (retval) + return retval; + + /* Startup rx-int */ + if (IS_SMC(pinfo)) { + setbits8(&pinfo->smcp->smc_smcm, SMCM_RX); + setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN)); + } else { + setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); + setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT)); + } + + return 0; +} + +inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo) +{ + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(pinfo->wait_closing); +} + +/* + * Shutdown the uart + */ +static void cpm_uart_shutdown(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + pr_debug("CPM uart[%d]:shutdown\n", port->line); + + /* free interrupt handler */ + free_irq(port->irq, port); + + /* If the port is not the console, disable Rx and Tx. */ + if (!(pinfo->flags & FLAG_CONSOLE)) { + /* Wait for all the BDs marked sent */ + while(!cpm_uart_tx_empty(port)) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(2); + } + + if (pinfo->wait_closing) + cpm_uart_wait_until_send(pinfo); + + /* Stop uarts */ + if (IS_SMC(pinfo)) { + smc_t __iomem *smcp = pinfo->smcp; + clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX); + } else { + scc_t __iomem *sccp = pinfo->sccp; + clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + } + + /* Shut them really down and reinit buffer descriptors */ + if (IS_SMC(pinfo)) { + out_be16(&pinfo->smcup->smc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + } else { + out_be16(&pinfo->sccup->scc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); + } + + cpm_uart_initbd(pinfo); + } +} + +static void cpm_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + int baud; + unsigned long flags; + u16 cval, scval, prev_mode; + int bits, sbits; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:set_termios\n", port->line); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + if (baud <= HW_BUF_SPD_THRESHOLD || + (pinfo->port.state && pinfo->port.state->port.tty->low_latency)) + pinfo->rx_fifosize = 1; + else + pinfo->rx_fifosize = RX_BUF_SIZE; + + /* Character length programmed into the mode register is the + * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, + * 1 or 2 stop bits, minus 1. + * The value 'bits' counts this for us. + */ + cval = 0; + scval = 0; + + /* byte size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + bits = 5; + break; + case CS6: + bits = 6; + break; + case CS7: + bits = 7; + break; + case CS8: + bits = 8; + break; + /* Never happens, but GCC is too dumb to figure it out */ + default: + bits = 8; + break; + } + sbits = bits - 5; + + if (termios->c_cflag & CSTOPB) { + cval |= SMCMR_SL; /* Two stops */ + scval |= SCU_PSMR_SL; + bits++; + } + + if (termios->c_cflag & PARENB) { + cval |= SMCMR_PEN; + scval |= SCU_PSMR_PEN; + bits++; + if (!(termios->c_cflag & PARODD)) { + cval |= SMCMR_PM_EVEN; + scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP); + } + } + + /* + * Update the timeout + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * Set up parity check flag + */ +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + + port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); + if (termios->c_iflag & INPCK) + port->read_status_mask |= BD_SC_FR | BD_SC_PR; + if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK)) + port->read_status_mask |= BD_SC_BR; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BD_SC_BR; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_OV; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + port->read_status_mask &= ~BD_SC_EMPTY; + + spin_lock_irqsave(&port->lock, flags); + + /* Start bit has not been added (so don't, because we would just + * subtract it later), and we need to add one for the number of + * stops bits (there is always at least one). + */ + bits++; + if (IS_SMC(pinfo)) { + /* + * MRBLR can be changed while an SMC/SCC is operating only + * if it is done in a single bus cycle with one 16-bit move + * (not two 8-bit bus cycles back-to-back). This occurs when + * the cp shifts control to the next RxBD, so the change does + * not take effect immediately. To guarantee the exact RxBD + * on which the change occurs, change MRBLR only while the + * SMC/SCC receiver is disabled. + */ + out_be16(&pinfo->smcup->smc_mrblr, pinfo->rx_fifosize); + + /* Set the mode register. We want to keep a copy of the + * enables, because we want to put them back if they were + * present. + */ + prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN); + /* Output in *one* operation, so we don't interrupt RX/TX if they + * were already enabled. */ + out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | + SMCMR_SM_UART | prev_mode); + } else { + out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); + out_be16(&sccp->scc_psmr, (sbits << 12) | scval); + } + + if (pinfo->clk) + clk_set_rate(pinfo->clk, baud); + else + cpm_set_brg(pinfo->brg - 1, baud); + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *cpm_uart_type(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:uart_type\n", port->line); + + return port->type == PORT_CPM ? "CPM UART" : NULL; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int cpm_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + + pr_debug("CPM uart[%d]:verify_port\n", port->line); + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= nr_irqs) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +/* + * Transmit characters, refill buffer descriptor, if possible + */ +static int cpm_uart_tx_pump(struct uart_port *port) +{ + cbd_t __iomem *bdp; + u8 *p; + int count; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + struct circ_buf *xmit = &port->state->xmit; + + /* Handle xon/xoff */ + if (port->x_char) { + /* Pick next descriptor and fill from buffer */ + bdp = pinfo->tx_cur; + + p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); + + *p++ = port->x_char; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + /* Get next BD. */ + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = pinfo->tx_bd_base; + else + bdp++; + pinfo->tx_cur = bdp; + + port->icount.tx++; + port->x_char = 0; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + cpm_uart_stop_tx(port); + return 0; + } + + /* Pick next descriptor and fill from buffer */ + bdp = pinfo->tx_cur; + + while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) && + xmit->tail != xmit->head) { + count = 0; + p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); + while (count < pinfo->tx_fifosize) { + *p++ = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + count++; + if (xmit->head == xmit->tail) + break; + } + out_be16(&bdp->cbd_datlen, count); + setbits16(&bdp->cbd_sc, BD_SC_READY); + /* Get next BD. */ + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = pinfo->tx_bd_base; + else + bdp++; + } + pinfo->tx_cur = bdp; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) { + cpm_uart_stop_tx(port); + return 0; + } + + return 1; +} + +/* + * init buffer descriptors + */ +static void cpm_uart_initbd(struct uart_cpm_port *pinfo) +{ + int i; + u8 *mem_addr; + cbd_t __iomem *bdp; + + pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + mem_addr = pinfo->mem_addr; + bdp = pinfo->rx_cur = pinfo->rx_bd_base; + for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) { + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT); + mem_addr += pinfo->rx_fifosize; + } + + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); + bdp = pinfo->tx_cur = pinfo->tx_bd_base; + for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) { + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_INTRPT); + mem_addr += pinfo->tx_fifosize; + } + + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_INTRPT); +} + +static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) +{ + scc_t __iomem *scp; + scc_uart_t __iomem *sup; + + pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line); + + scp = pinfo->sccp; + sup = pinfo->sccup; + + /* Store address */ + out_be16(&pinfo->sccup->scc_genscc.scc_rbase, + (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); + out_be16(&pinfo->sccup->scc_genscc.scc_tbase, + (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); + + /* Set up the uart parameters in the + * parameter ram. + */ + + cpm_set_scc_fcr(sup); + + out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); + out_be16(&sup->scc_maxidl, pinfo->rx_fifosize); + out_be16(&sup->scc_brkcr, 1); + out_be16(&sup->scc_parec, 0); + out_be16(&sup->scc_frmec, 0); + out_be16(&sup->scc_nosec, 0); + out_be16(&sup->scc_brkec, 0); + out_be16(&sup->scc_uaddr1, 0); + out_be16(&sup->scc_uaddr2, 0); + out_be16(&sup->scc_toseq, 0); + out_be16(&sup->scc_char1, 0x8000); + out_be16(&sup->scc_char2, 0x8000); + out_be16(&sup->scc_char3, 0x8000); + out_be16(&sup->scc_char4, 0x8000); + out_be16(&sup->scc_char5, 0x8000); + out_be16(&sup->scc_char6, 0x8000); + out_be16(&sup->scc_char7, 0x8000); + out_be16(&sup->scc_char8, 0x8000); + out_be16(&sup->scc_rccm, 0xc0ff); + + /* Send the CPM an initialize command. + */ + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + out_be32(&scp->scc_gsmrh, 0); + out_be32(&scp->scc_gsmrl, + SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + + /* Enable rx interrupts and clear all pending events. */ + out_be16(&scp->scc_sccm, 0); + out_be16(&scp->scc_scce, 0xffff); + out_be16(&scp->scc_dsr, 0x7e7e); + out_be16(&scp->scc_psmr, 0x3000); + + setbits32(&scp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +} + +static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) +{ + smc_t __iomem *sp; + smc_uart_t __iomem *up; + + pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line); + + sp = pinfo->smcp; + up = pinfo->smcup; + + /* Store address */ + out_be16(&pinfo->smcup->smc_rbase, + (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); + out_be16(&pinfo->smcup->smc_tbase, + (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); + +/* + * In case SMC1 is being relocated... + */ +#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH) + out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase)); + out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase)); + out_be32(&up->smc_rstate, 0); + out_be32(&up->smc_tstate, 0); + out_be16(&up->smc_brkcr, 1); /* number of break chars */ + out_be16(&up->smc_brkec, 0); +#endif + + /* Set up the uart parameters in the + * parameter ram. + */ + cpm_set_smc_fcr(up); + + /* Using idle character time requires some additional tuning. */ + out_be16(&up->smc_mrblr, pinfo->rx_fifosize); + out_be16(&up->smc_maxidl, pinfo->rx_fifosize); + out_be16(&up->smc_brklen, 0); + out_be16(&up->smc_brkec, 0); + out_be16(&up->smc_brkcr, 1); + + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART); + + /* Enable only rx interrupts clear all pending events. */ + out_8(&sp->smc_smcm, 0); + out_8(&sp->smc_smce, 0xff); + + setbits16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN); +} + +/* + * Initialize port. This is called from early_console stuff + * so we have to be careful here ! + */ +static int cpm_uart_request_port(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + int ret; + + pr_debug("CPM uart[%d]:request port\n", port->line); + + if (pinfo->flags & FLAG_CONSOLE) + return 0; + + if (IS_SMC(pinfo)) { + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + } else { + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + } + + ret = cpm_uart_allocbuf(pinfo, 0); + + if (ret) + return ret; + + cpm_uart_initbd(pinfo); + if (IS_SMC(pinfo)) + cpm_uart_init_smc(pinfo); + else + cpm_uart_init_scc(pinfo); + + return 0; +} + +static void cpm_uart_release_port(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (!(pinfo->flags & FLAG_CONSOLE)) + cpm_uart_freebuf(pinfo); +} + +/* + * Configure/autoconfigure the port. + */ +static void cpm_uart_config_port(struct uart_port *port, int flags) +{ + pr_debug("CPM uart[%d]:config_port\n", port->line); + + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_CPM; + cpm_uart_request_port(port); + } +} + +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE) +/* + * Write a string to the serial port + * Note that this is called with interrupts already disabled + */ +static void cpm_uart_early_write(struct uart_cpm_port *pinfo, + const char *string, u_int count) +{ + unsigned int i; + cbd_t __iomem *bdp, *bdbase; + unsigned char *cpm_outp_addr; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->tx_cur; + bdbase = pinfo->tx_bd_base; + + /* + * Now, do each character. This is not as bad as it looks + * since this is a holding FIFO and not a transmitting FIFO. + * We could add the complexity of filling the entire transmit + * buffer, but we would just wait longer between accesses...... + */ + for (i = 0; i < count; i++, string++) { + /* Wait for transmitter fifo to empty. + * Ready indicates output is ready, and xmt is doing + * that, not that it is ready for us to send. + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + /* Send the character out. + * If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = *string; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + + /* if a LF, also do CR... */ + if (*string == 10) { + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = 13; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + } + } + + /* + * Finally, Wait for transmitter & holding register to empty + * and restore the IER + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + pinfo->tx_cur = bdp; +} +#endif + +#ifdef CONFIG_CONSOLE_POLL +/* Serial polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +#define GDB_BUF_SIZE 512 /* power of 2, please */ + +static char poll_buf[GDB_BUF_SIZE]; +static char *pollp; +static int poll_chars; + +static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo) +{ + u_char c, *cp; + volatile cbd_t *bdp; + int i; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->rx_cur; + while (bdp->cbd_sc & BD_SC_EMPTY) + ; + + /* If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); + + if (obuf) { + i = c = bdp->cbd_datlen; + while (i-- > 0) + *obuf++ = *cp++; + } else + c = *cp; + bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID); + bdp->cbd_sc |= BD_SC_EMPTY; + + if (bdp->cbd_sc & BD_SC_WRAP) + bdp = pinfo->rx_bd_base; + else + bdp++; + pinfo->rx_cur = (cbd_t *)bdp; + + return (int)c; +} + +static int cpm_get_poll_char(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (!serial_polled) { + serial_polled = 1; + poll_chars = 0; + } + if (poll_chars <= 0) { + poll_chars = poll_wait_key(poll_buf, pinfo); + pollp = poll_buf; + } + poll_chars--; + return *pollp++; +} + +static void cpm_put_poll_char(struct uart_port *port, + unsigned char c) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + static char ch[2]; + + ch[0] = (char)c; + cpm_uart_early_write(pinfo, ch, 1); +} +#endif /* CONFIG_CONSOLE_POLL */ + +static struct uart_ops cpm_uart_pops = { + .tx_empty = cpm_uart_tx_empty, + .set_mctrl = cpm_uart_set_mctrl, + .get_mctrl = cpm_uart_get_mctrl, + .stop_tx = cpm_uart_stop_tx, + .start_tx = cpm_uart_start_tx, + .stop_rx = cpm_uart_stop_rx, + .enable_ms = cpm_uart_enable_ms, + .break_ctl = cpm_uart_break_ctl, + .startup = cpm_uart_startup, + .shutdown = cpm_uart_shutdown, + .set_termios = cpm_uart_set_termios, + .type = cpm_uart_type, + .release_port = cpm_uart_release_port, + .request_port = cpm_uart_request_port, + .config_port = cpm_uart_config_port, + .verify_port = cpm_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = cpm_get_poll_char, + .poll_put_char = cpm_put_poll_char, +#endif +}; + +struct uart_cpm_port cpm_uart_ports[UART_NR]; + +static int cpm_uart_init_port(struct device_node *np, + struct uart_cpm_port *pinfo) +{ + const u32 *data; + void __iomem *mem, *pram; + int len; + int ret; + int i; + + data = of_get_property(np, "clock", NULL); + if (data) { + struct clk *clk = clk_get(NULL, (const char*)data); + if (!IS_ERR(clk)) + pinfo->clk = clk; + } + if (!pinfo->clk) { + data = of_get_property(np, "fsl,cpm-brg", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-brg property.\n", np->name); + return -EINVAL; + } + pinfo->brg = *data; + } + + data = of_get_property(np, "fsl,cpm-command", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-command property.\n", np->name); + return -EINVAL; + } + pinfo->command = *data; + + mem = of_iomap(np, 0); + if (!mem) + return -ENOMEM; + + if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") || + of_device_is_compatible(np, "fsl,cpm2-scc-uart")) { + pinfo->sccp = mem; + pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np); + } else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") || + of_device_is_compatible(np, "fsl,cpm2-smc-uart")) { + pinfo->flags |= FLAG_SMC; + pinfo->smcp = mem; + pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np); + } else { + ret = -ENODEV; + goto out_mem; + } + + if (!pram) { + ret = -ENOMEM; + goto out_mem; + } + + pinfo->tx_nrfifos = TX_NUM_FIFO; + pinfo->tx_fifosize = TX_BUF_SIZE; + pinfo->rx_nrfifos = RX_NUM_FIFO; + pinfo->rx_fifosize = RX_BUF_SIZE; + + pinfo->port.uartclk = ppc_proc_freq; + pinfo->port.mapbase = (unsigned long)mem; + pinfo->port.type = PORT_CPM; + pinfo->port.ops = &cpm_uart_pops, + pinfo->port.iotype = UPIO_MEM; + pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize; + spin_lock_init(&pinfo->port.lock); + + pinfo->port.irq = of_irq_to_resource(np, 0, NULL); + if (pinfo->port.irq == NO_IRQ) { + ret = -EINVAL; + goto out_pram; + } + + for (i = 0; i < NUM_GPIOS; i++) + pinfo->gpios[i] = of_get_gpio(np, i); + +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM + udbg_putc = NULL; +#endif + + return cpm_uart_request_port(&pinfo->port); + +out_pram: + cpm_uart_unmap_pram(pinfo, pram); +out_mem: + iounmap(mem); + return ret; +} + +#ifdef CONFIG_SERIAL_CPM_CONSOLE +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * Note that this is called with interrupts already disabled + */ +static void cpm_uart_console_write(struct console *co, const char *s, + u_int count) +{ + struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; + unsigned long flags; + int nolock = oops_in_progress; + + if (unlikely(nolock)) { + local_irq_save(flags); + } else { + spin_lock_irqsave(&pinfo->port.lock, flags); + } + + cpm_uart_early_write(pinfo, s, count); + + if (unlikely(nolock)) { + local_irq_restore(flags); + } else { + spin_unlock_irqrestore(&pinfo->port.lock, flags); + } +} + + +static int __init cpm_uart_console_setup(struct console *co, char *options) +{ + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + struct uart_cpm_port *pinfo; + struct uart_port *port; + + struct device_node *np = NULL; + int i = 0; + + if (co->index >= UART_NR) { + printk(KERN_ERR "cpm_uart: console index %d too high\n", + co->index); + return -ENODEV; + } + + do { + np = of_find_node_by_type(np, "serial"); + if (!np) + return -ENODEV; + + if (!of_device_is_compatible(np, "fsl,cpm1-smc-uart") && + !of_device_is_compatible(np, "fsl,cpm1-scc-uart") && + !of_device_is_compatible(np, "fsl,cpm2-smc-uart") && + !of_device_is_compatible(np, "fsl,cpm2-scc-uart")) + i--; + } while (i++ != co->index); + + pinfo = &cpm_uart_ports[co->index]; + + pinfo->flags |= FLAG_CONSOLE; + port = &pinfo->port; + + ret = cpm_uart_init_port(np, pinfo); + of_node_put(np); + if (ret) + return ret; + + if (options) { + uart_parse_options(options, &baud, &parity, &bits, &flow); + } else { + if ((baud = uart_baudrate()) == -1) + baud = 9600; + } + + if (IS_SMC(pinfo)) { + out_be16(&pinfo->smcup->smc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + } else { + out_be16(&pinfo->sccup->scc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + } + + ret = cpm_uart_allocbuf(pinfo, 1); + + if (ret) + return ret; + + cpm_uart_initbd(pinfo); + + if (IS_SMC(pinfo)) + cpm_uart_init_smc(pinfo); + else + cpm_uart_init_scc(pinfo); + + uart_set_options(port, co, baud, parity, bits, flow); + cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); + + return 0; +} + +static struct uart_driver cpm_reg; +static struct console cpm_scc_uart_console = { + .name = "ttyCPM", + .write = cpm_uart_console_write, + .device = uart_console_device, + .setup = cpm_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &cpm_reg, +}; + +static int __init cpm_uart_console_init(void) +{ + register_console(&cpm_scc_uart_console); + return 0; +} + +console_initcall(cpm_uart_console_init); + +#define CPM_UART_CONSOLE &cpm_scc_uart_console +#else +#define CPM_UART_CONSOLE NULL +#endif + +static struct uart_driver cpm_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyCPM", + .dev_name = "ttyCPM", + .major = SERIAL_CPM_MAJOR, + .minor = SERIAL_CPM_MINOR, + .cons = CPM_UART_CONSOLE, + .nr = UART_NR, +}; + +static int probe_index; + +static int __devinit cpm_uart_probe(struct platform_device *ofdev, + const struct of_device_id *match) +{ + int index = probe_index++; + struct uart_cpm_port *pinfo = &cpm_uart_ports[index]; + int ret; + + pinfo->port.line = index; + + if (index >= UART_NR) + return -ENODEV; + + dev_set_drvdata(&ofdev->dev, pinfo); + + /* initialize the device pointer for the port */ + pinfo->port.dev = &ofdev->dev; + + ret = cpm_uart_init_port(ofdev->dev.of_node, pinfo); + if (ret) + return ret; + + return uart_add_one_port(&cpm_reg, &pinfo->port); +} + +static int __devexit cpm_uart_remove(struct platform_device *ofdev) +{ + struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev); + return uart_remove_one_port(&cpm_reg, &pinfo->port); +} + +static struct of_device_id cpm_uart_match[] = { + { + .compatible = "fsl,cpm1-smc-uart", + }, + { + .compatible = "fsl,cpm1-scc-uart", + }, + { + .compatible = "fsl,cpm2-smc-uart", + }, + { + .compatible = "fsl,cpm2-scc-uart", + }, + {} +}; + +static struct of_platform_driver cpm_uart_driver = { + .driver = { + .name = "cpm_uart", + .owner = THIS_MODULE, + .of_match_table = cpm_uart_match, + }, + .probe = cpm_uart_probe, + .remove = cpm_uart_remove, + }; + +static int __init cpm_uart_init(void) +{ + int ret = uart_register_driver(&cpm_reg); + if (ret) + return ret; + + ret = of_register_platform_driver(&cpm_uart_driver); + if (ret) + uart_unregister_driver(&cpm_reg); + + return ret; +} + +static void __exit cpm_uart_exit(void) +{ + of_unregister_platform_driver(&cpm_uart_driver); + uart_unregister_driver(&cpm_reg); +} + +module_init(cpm_uart_init); +module_exit(cpm_uart_exit); + +MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis"); +MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR); diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c new file mode 100644 index 000000000000..3fc1d66e32c6 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c @@ -0,0 +1,138 @@ +/* + * linux/drivers/serial/cpm_uart.c + * + * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions + * + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * (C) 2006 MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/module.h> +#include <linux/tty.h> +#include <linux/gfp.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/device.h> +#include <linux/bootmem.h> +#include <linux/dma-mapping.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/fs_pd.h> + +#include <linux/serial_core.h> +#include <linux/kernel.h> + +#include <linux/of.h> + +#include "cpm_uart.h" + +/**************************************************************/ + +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) +{ + cpm_command(port->command, cmd); +} + +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np) +{ + return of_iomap(np, 1); +} + +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) +{ + iounmap(pram); +} + +/* + * Allocate DP-Ram and memory buffers. We need to allocate a transmit and + * receive buffer descriptors from dual port ram, and a character + * buffer area from host mem. If we are allocating for the console we need + * to do it from bootmem + */ +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) +{ + int dpmemsz, memsz; + u8 *dp_mem; + unsigned long dp_offset; + u8 *mem_addr; + dma_addr_t dma_addr = 0; + + pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); + + dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); + dp_offset = cpm_dpalloc(dpmemsz, 8); + if (IS_ERR_VALUE(dp_offset)) { + printk(KERN_ERR + "cpm_uart_cpm1.c: could not allocate buffer descriptors\n"); + return -ENOMEM; + } + dp_mem = cpm_dpram_addr(dp_offset); + + memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); + if (is_con) { + /* was hostalloc but changed cause it blows away the */ + /* large tlb mapping when pinning the kernel area */ + mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8)); + dma_addr = (u32)cpm_dpram_phys(mem_addr); + } else + mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, + GFP_KERNEL); + + if (mem_addr == NULL) { + cpm_dpfree(dp_offset); + printk(KERN_ERR + "cpm_uart_cpm1.c: could not allocate coherent memory\n"); + return -ENOMEM; + } + + pinfo->dp_addr = dp_offset; + pinfo->mem_addr = mem_addr; /* virtual address*/ + pinfo->dma_addr = dma_addr; /* physical address*/ + pinfo->mem_size = memsz; + + pinfo->rx_buf = mem_addr; + pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos + * pinfo->rx_fifosize); + + pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem; + pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; + + return 0; +} + +void cpm_uart_freebuf(struct uart_cpm_port *pinfo) +{ + dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * + pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * + pinfo->tx_fifosize), pinfo->mem_addr, + pinfo->dma_addr); + + cpm_dpfree(pinfo->dp_addr); +} diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h new file mode 100644 index 000000000000..10eecd6af6d4 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h @@ -0,0 +1,34 @@ +/* + * linux/drivers/serial/cpm_uart/cpm_uart_cpm1.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * definitions for cpm1 + * + */ + +#ifndef CPM_UART_CPM1_H +#define CPM_UART_CPM1_H + +#include <asm/cpm1.h> + +static inline void cpm_set_brg(int brg, int baud) +{ + cpm_setbrg(brg, baud); +} + +static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup) +{ + out_8(&sup->scc_genscc.scc_rfcr, SMC_EB); + out_8(&sup->scc_genscc.scc_tfcr, SMC_EB); +} + +static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up) +{ + out_8(&up->smc_rfcr, SMC_EB); + out_8(&up->smc_tfcr, SMC_EB); +} + +#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) + +#endif diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c new file mode 100644 index 000000000000..814ac006393f --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c @@ -0,0 +1,174 @@ +/* + * linux/drivers/serial/cpm_uart_cpm2.c + * + * Driver for CPM (SCC/SMC) serial ports; CPM2 definitions + * + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * (C) 2006 MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/module.h> +#include <linux/tty.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/device.h> +#include <linux/bootmem.h> +#include <linux/dma-mapping.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/fs_pd.h> +#include <asm/prom.h> + +#include <linux/serial_core.h> +#include <linux/kernel.h> + +#include "cpm_uart.h" + +/**************************************************************/ + +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) +{ + cpm_command(port->command, cmd); +} + +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np) +{ + void __iomem *pram; + unsigned long offset; + struct resource res; + resource_size_t len; + + /* Don't remap parameter RAM if it has already been initialized + * during console setup. + */ + if (IS_SMC(port) && port->smcup) + return port->smcup; + else if (!IS_SMC(port) && port->sccup) + return port->sccup; + + if (of_address_to_resource(np, 1, &res)) + return NULL; + + len = resource_size(&res); + pram = ioremap(res.start, len); + if (!pram) + return NULL; + + if (!IS_SMC(port)) + return pram; + + if (len != 2) { + printk(KERN_WARNING "cpm_uart[%d]: device tree references " + "SMC pram, using boot loader/wrapper pram mapping. " + "Please fix your device tree to reference the pram " + "base register instead.\n", + port->port.line); + return pram; + } + + offset = cpm_dpalloc(PROFF_SMC_SIZE, 64); + out_be16(pram, offset); + iounmap(pram); + return cpm_muram_addr(offset); +} + +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) +{ + if (!IS_SMC(port)) + iounmap(pram); +} + +/* + * Allocate DP-Ram and memory buffers. We need to allocate a transmit and + * receive buffer descriptors from dual port ram, and a character + * buffer area from host mem. If we are allocating for the console we need + * to do it from bootmem + */ +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) +{ + int dpmemsz, memsz; + u8 __iomem *dp_mem; + unsigned long dp_offset; + u8 *mem_addr; + dma_addr_t dma_addr = 0; + + pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); + + dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); + dp_offset = cpm_dpalloc(dpmemsz, 8); + if (IS_ERR_VALUE(dp_offset)) { + printk(KERN_ERR + "cpm_uart_cpm.c: could not allocate buffer descriptors\n"); + return -ENOMEM; + } + + dp_mem = cpm_dpram_addr(dp_offset); + + memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); + if (is_con) { + mem_addr = kzalloc(memsz, GFP_NOWAIT); + dma_addr = virt_to_bus(mem_addr); + } + else + mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, + GFP_KERNEL); + + if (mem_addr == NULL) { + cpm_dpfree(dp_offset); + printk(KERN_ERR + "cpm_uart_cpm.c: could not allocate coherent memory\n"); + return -ENOMEM; + } + + pinfo->dp_addr = dp_offset; + pinfo->mem_addr = mem_addr; + pinfo->dma_addr = dma_addr; + pinfo->mem_size = memsz; + + pinfo->rx_buf = mem_addr; + pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos + * pinfo->rx_fifosize); + + pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem; + pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; + + return 0; +} + +void cpm_uart_freebuf(struct uart_cpm_port *pinfo) +{ + dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * + pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * + pinfo->tx_fifosize), (void __force *)pinfo->mem_addr, + pinfo->dma_addr); + + cpm_dpfree(pinfo->dp_addr); +} diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h new file mode 100644 index 000000000000..7194c63dcf5f --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h @@ -0,0 +1,34 @@ +/* + * linux/drivers/serial/cpm_uart/cpm_uart_cpm2.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * definitions for cpm2 + * + */ + +#ifndef CPM_UART_CPM2_H +#define CPM_UART_CPM2_H + +#include <asm/cpm2.h> + +static inline void cpm_set_brg(int brg, int baud) +{ + cpm_setbrg(brg, baud); +} + +static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup) +{ + out_8(&sup->scc_genscc.scc_rfcr, CPMFCR_GBL | CPMFCR_EB); + out_8(&sup->scc_genscc.scc_tfcr, CPMFCR_GBL | CPMFCR_EB); +} + +static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up) +{ + out_8(&up->smc_rfcr, CPMFCR_GBL | CPMFCR_EB); + out_8(&up->smc_tfcr, CPMFCR_GBL | CPMFCR_EB); +} + +#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) + +#endif |