diff options
Diffstat (limited to 'drivers/tty/serial/fsl_lpuart.c')
| -rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 20 |
1 files changed, 13 insertions, 7 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 56e6ba3250cd..c91916e13648 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -858,11 +858,17 @@ static unsigned int lpuart32_tx_empty(struct uart_port *port) struct lpuart_port, port); unsigned long stat = lpuart32_read(port, UARTSTAT); unsigned long sfifo = lpuart32_read(port, UARTFIFO); + unsigned long ctrl = lpuart32_read(port, UARTCTRL); if (sport->dma_tx_in_progress) return 0; - if (stat & UARTSTAT_TC && sfifo & UARTFIFO_TXEMPT) + /* + * LPUART Transmission Complete Flag may never be set while queuing a break + * character, so avoid checking for transmission complete when UARTCTRL_SBK + * is asserted. + */ + if ((stat & UARTSTAT_TC && sfifo & UARTFIFO_TXEMPT) || ctrl & UARTCTRL_SBK) return TIOCSER_TEMT; return 0; @@ -1290,7 +1296,7 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport) * 10ms at any baud rate. */ sport->rx_dma_rng_buf_len = (DMA_RX_TIMEOUT * baud / bits / 1000) * 2; - sport->rx_dma_rng_buf_len = (1 << (fls(sport->rx_dma_rng_buf_len) - 1)); + sport->rx_dma_rng_buf_len = (1 << fls(sport->rx_dma_rng_buf_len)); if (sport->rx_dma_rng_buf_len < 16) sport->rx_dma_rng_buf_len = 16; @@ -1400,12 +1406,12 @@ static int lpuart32_config_rs485(struct uart_port *port, struct ktermios *termio struct lpuart_port, port); unsigned long modem = lpuart32_read(&sport->port, UARTMODIR) - & ~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE); + & ~(UARTMODIR_TXRTSPOL | UARTMODIR_TXRTSE); lpuart32_write(&sport->port, modem, UARTMODIR); if (rs485->flags & SER_RS485_ENABLED) { /* Enable auto RS-485 RTS mode */ - modem |= UARTMODEM_TXRTSE; + modem |= UARTMODIR_TXRTSE; /* * The hardware defaults to RTS logic HIGH while transfer. @@ -1414,9 +1420,9 @@ static int lpuart32_config_rs485(struct uart_port *port, struct ktermios *termio * Note: UART is assumed to be active high. */ if (rs485->flags & SER_RS485_RTS_ON_SEND) - modem |= UARTMODEM_TXRTSPOL; + modem |= UARTMODIR_TXRTSPOL; else if (rs485->flags & SER_RS485_RTS_AFTER_SEND) - modem &= ~UARTMODEM_TXRTSPOL; + modem &= ~UARTMODIR_TXRTSPOL; } lpuart32_write(&sport->port, modem, UARTMODIR); @@ -2942,7 +2948,7 @@ static bool lpuart_uport_is_active(struct lpuart_port *sport) tty = tty_port_tty_get(port); if (tty) { tty_dev = tty->dev; - may_wake = device_may_wakeup(tty_dev); + may_wake = tty_dev && device_may_wakeup(tty_dev); tty_kref_put(tty); } |