summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/imx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/imx.c')
-rw-r--r--drivers/tty/serial/imx.c153
1 files changed, 75 insertions, 78 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 8f62a3cec23e..c53968e5439c 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -302,7 +302,7 @@ static inline int is_imx6q_uart(struct imx_port *sport)
/*
* Save and restore functions for UCR1, UCR2 and UCR3 registers
*/
-#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_IMX_CONSOLE)
+#if defined(CONFIG_SERIAL_IMX_CONSOLE)
static void imx_port_ucrs_save(struct uart_port *port,
struct imx_port_ucrs *ucr)
{
@@ -991,7 +991,6 @@ static int imx_uart_dma_init(struct imx_port *sport)
sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!sport->rx_buf) {
- dev_err(dev, "cannot alloc DMA buffer.\n");
ret = -ENOMEM;
goto err;
}
@@ -1076,11 +1075,11 @@ static int imx_startup(struct uart_port *port)
retval = clk_prepare_enable(sport->clk_per);
if (retval)
- goto error_out1;
+ return retval;
retval = clk_prepare_enable(sport->clk_ipg);
if (retval) {
clk_disable_unprepare(sport->clk_per);
- goto error_out1;
+ return retval;
}
imx_setup_ufcr(sport, 0);
@@ -1109,37 +1108,6 @@ static int imx_startup(struct uart_port *port)
while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
udelay(1);
- /*
- * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
- * chips only have one interrupt.
- */
- if (sport->txirq > 0) {
- retval = request_irq(sport->rxirq, imx_rxint, 0,
- dev_name(port->dev), sport);
- if (retval)
- goto error_out1;
-
- retval = request_irq(sport->txirq, imx_txint, 0,
- dev_name(port->dev), sport);
- if (retval)
- goto error_out2;
-
- /* do not use RTS IRQ on IrDA */
- if (!USE_IRDA(sport)) {
- retval = request_irq(sport->rtsirq, imx_rtsint, 0,
- dev_name(port->dev), sport);
- if (retval)
- goto error_out3;
- }
- } else {
- retval = request_irq(sport->port.irq, imx_int, 0,
- dev_name(port->dev), sport);
- if (retval) {
- free_irq(sport->port.irq, sport);
- goto error_out1;
- }
- }
-
spin_lock_irqsave(&sport->port.lock, flags);
/*
* Finally, clear and enable interrupts
@@ -1201,15 +1169,6 @@ static int imx_startup(struct uart_port *port)
}
return 0;
-
-error_out3:
- if (sport->txirq)
- free_irq(sport->txirq, sport);
-error_out2:
- if (sport->rxirq)
- free_irq(sport->rxirq, sport);
-error_out1:
- return retval;
}
static void imx_shutdown(struct uart_port *port)
@@ -1255,17 +1214,6 @@ static void imx_shutdown(struct uart_port *port)
del_timer_sync(&sport->timer);
/*
- * Free the interrupts
- */
- if (sport->txirq > 0) {
- if (!USE_IRDA(sport))
- free_irq(sport->rtsirq, sport);
- free_irq(sport->txirq, sport);
- free_irq(sport->rxirq, sport);
- } else
- free_irq(sport->port.irq, sport);
-
- /*
* Disable all interrupts, port and break condition.
*/
@@ -1507,44 +1455,65 @@ imx_verify_port(struct uart_port *port, struct serial_struct *ser)
}
#if defined(CONFIG_CONSOLE_POLL)
+
+static int imx_poll_init(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned long flags;
+ unsigned long temp;
+ int retval;
+
+ retval = clk_prepare_enable(sport->clk_ipg);
+ if (retval)
+ return retval;
+ retval = clk_prepare_enable(sport->clk_per);
+ if (retval)
+ clk_disable_unprepare(sport->clk_ipg);
+
+ imx_setup_ufcr(sport, 0);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ temp = readl(sport->port.membase + UCR1);
+ if (is_imx1_uart(sport))
+ temp |= IMX1_UCR1_UARTCLKEN;
+ temp |= UCR1_UARTEN | UCR1_RRDYEN;
+ temp &= ~(UCR1_TXMPTYEN | UCR1_RTSDEN);
+ writel(temp, sport->port.membase + UCR1);
+
+ temp = readl(sport->port.membase + UCR2);
+ temp |= UCR2_RXEN;
+ writel(temp, sport->port.membase + UCR2);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+
+ return 0;
+}
+
static int imx_poll_get_char(struct uart_port *port)
{
- if (!(readl(port->membase + USR2) & USR2_RDR))
+ if (!(readl_relaxed(port->membase + USR2) & USR2_RDR))
return NO_POLL_CHAR;
- return readl(port->membase + URXD0) & URXD_RX_DATA;
+ return readl_relaxed(port->membase + URXD0) & URXD_RX_DATA;
}
static void imx_poll_put_char(struct uart_port *port, unsigned char c)
{
- struct imx_port_ucrs old_ucr;
unsigned int status;
- /* save control registers */
- imx_port_ucrs_save(port, &old_ucr);
-
- /* disable interrupts */
- writel(UCR1_UARTEN, port->membase + UCR1);
- writel(old_ucr.ucr2 & ~(UCR2_ATEN | UCR2_RTSEN | UCR2_ESCI),
- port->membase + UCR2);
- writel(old_ucr.ucr3 & ~(UCR3_DCD | UCR3_RI | UCR3_DTREN),
- port->membase + UCR3);
-
/* drain */
do {
- status = readl(port->membase + USR1);
+ status = readl_relaxed(port->membase + USR1);
} while (~status & USR1_TRDY);
/* write */
- writel(c, port->membase + URTX0);
+ writel_relaxed(c, port->membase + URTX0);
/* flush */
do {
- status = readl(port->membase + USR2);
+ status = readl_relaxed(port->membase + USR2);
} while (~status & USR2_TXDC);
-
- /* restore control registers */
- imx_port_ucrs_restore(port, &old_ucr);
}
#endif
@@ -1565,6 +1534,7 @@ static struct uart_ops imx_pops = {
.config_port = imx_config_port,
.verify_port = imx_verify_port,
#if defined(CONFIG_CONSOLE_POLL)
+ .poll_init = imx_poll_init,
.poll_get_char = imx_poll_get_char,
.poll_put_char = imx_poll_put_char,
#endif
@@ -1929,6 +1899,36 @@ static int serial_imx_probe(struct platform_device *pdev)
sport->port.uartclk = clk_get_rate(sport->clk_per);
+ /*
+ * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
+ * chips only have one interrupt.
+ */
+ if (sport->txirq > 0) {
+ ret = devm_request_irq(&pdev->dev, sport->rxirq, imx_rxint, 0,
+ dev_name(&pdev->dev), sport);
+ if (ret)
+ return ret;
+
+ ret = devm_request_irq(&pdev->dev, sport->txirq, imx_txint, 0,
+ dev_name(&pdev->dev), sport);
+ if (ret)
+ return ret;
+
+ /* do not use RTS IRQ on IrDA */
+ if (!USE_IRDA(sport)) {
+ ret = devm_request_irq(&pdev->dev, sport->rtsirq,
+ imx_rtsint, 0,
+ dev_name(&pdev->dev), sport);
+ if (ret)
+ return ret;
+ }
+ } else {
+ ret = devm_request_irq(&pdev->dev, sport->port.irq, imx_int, 0,
+ dev_name(&pdev->dev), sport);
+ if (ret)
+ return ret;
+ }
+
imx_ports[sport->port.line] = sport;
platform_set_drvdata(pdev, sport);
@@ -1959,11 +1959,8 @@ static struct platform_driver serial_imx_driver = {
static int __init imx_serial_init(void)
{
- int ret;
-
- pr_info("Serial: IMX driver\n");
+ int ret = uart_register_driver(&imx_reg);
- ret = uart_register_driver(&imx_reg);
if (ret)
return ret;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 11:41:03 +0100