diff options
Diffstat (limited to 'drivers/tty/serial/mcf.c')
-rw-r--r-- | drivers/tty/serial/mcf.c | 43 |
1 files changed, 8 insertions, 35 deletions
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index bc896dc7d2ed..10496672dfdb 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -57,7 +57,6 @@ struct mcf_uart { struct uart_port port; unsigned int sigs; /* Local copy of line sigs */ unsigned char imr; /* Local IMR mirror */ - struct serial_rs485 rs485; /* RS485 settings */ }; /****************************************************************************/ @@ -104,7 +103,7 @@ static void mcf_start_tx(struct uart_port *port) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - if (pp->rs485.flags & SER_RS485_ENABLED) { + if (port->rs485.flags & SER_RS485_ENABLED) { /* Enable Transmitter */ writeb(MCFUART_UCR_TXENABLE, port->membase + MCFUART_UCR); /* Manually assert RTS */ @@ -258,12 +257,12 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, mr2 |= MCFUART_MR2_TXCTS; } - if (pp->rs485.flags & SER_RS485_ENABLED) { + spin_lock_irqsave(&port->lock, flags); + if (port->rs485.flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); mr2 |= MCFUART_MR2_TXRTS; } - spin_lock_irqsave(&port->lock, flags); uart_update_timeout(port, termios->c_cflag, baud); writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); @@ -360,7 +359,7 @@ static void mcf_tx_chars(struct mcf_uart *pp) pp->imr &= ~MCFUART_UIR_TXREADY; writeb(pp->imr, port->membase + MCFUART_UIMR); /* Disable TX to negate RTS automatically */ - if (pp->rs485.flags & SER_RS485_ENABLED) + if (port->rs485.flags & SER_RS485_ENABLED) writeb(MCFUART_UCR_TXDISABLE, port->membase + MCFUART_UCR); } @@ -440,13 +439,11 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) /****************************************************************************/ /* Enable or disable the RS485 support */ -static void mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) +static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) { struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; unsigned char mr1, mr2; - spin_lock_irqsave(&port->lock, flags); /* Get mode registers */ mr1 = readb(port->membase + MCFUART_UMR); mr2 = readb(port->membase + MCFUART_UMR); @@ -460,32 +457,8 @@ static void mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) } writeb(mr1, port->membase + MCFUART_UMR); writeb(mr2, port->membase + MCFUART_UMR); - pp->rs485 = *rs485; - spin_unlock_irqrestore(&port->lock, flags); -} + port->rs485 = *rs485; -static int mcf_ioctl(struct uart_port *port, unsigned int cmd, - unsigned long arg) -{ - switch (cmd) { - case TIOCSRS485: { - struct serial_rs485 rs485; - if (copy_from_user(&rs485, (struct serial_rs485 *)arg, - sizeof(struct serial_rs485))) - return -EFAULT; - mcf_config_rs485(port, &rs485); - break; - } - case TIOCGRS485: { - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - if (copy_to_user((struct serial_rs485 *)arg, &pp->rs485, - sizeof(struct serial_rs485))) - return -EFAULT; - break; - } - default: - return -ENOIOCTLCMD; - } return 0; } @@ -510,7 +483,6 @@ static const struct uart_ops mcf_uart_ops = { .release_port = mcf_release_port, .config_port = mcf_config_port, .verify_port = mcf_verify_port, - .ioctl = mcf_ioctl, }; static struct mcf_uart mcf_ports[4]; @@ -538,6 +510,7 @@ int __init early_mcf_setup(struct mcf_platform_uart *platp) port->irq = platp[i].irq; port->uartclk = MCF_BUSCLK; port->flags = UPF_BOOT_AUTOCONF; + port->rs485_config = mcf_config_rs485; port->ops = &mcf_uart_ops; } @@ -663,6 +636,7 @@ static int mcf_probe(struct platform_device *pdev) port->uartclk = MCF_BUSCLK; port->ops = &mcf_uart_ops; port->flags = UPF_BOOT_AUTOCONF; + port->rs485_config = mcf_config_rs485; uart_add_one_port(&mcf_driver, port); } @@ -693,7 +667,6 @@ static struct platform_driver mcf_platform_driver = { .remove = mcf_remove, .driver = { .name = "mcfuart", - .owner = THIS_MODULE, }, }; |