diff options
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 50 | ||||
| -rw-r--r-- | drivers/tty/serial/omap-serial.c | 10 |
2 files changed, 57 insertions, 3 deletions
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 4097f3f65b3b..7cd6f9a90542 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1379,6 +1379,9 @@ ce4100_serial_setup(struct serial_private *priv, #define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a #define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c +#define PCI_DEVICE_ID_INTEL_BDW_UART1 0x9ce3 +#define PCI_DEVICE_ID_INTEL_BDW_UART2 0x9ce4 + #define BYT_PRV_CLK 0x800 #define BYT_PRV_CLK_EN (1 << 0) #define BYT_PRV_CLK_M_VAL_SHIFT 1 @@ -1461,11 +1464,13 @@ byt_serial_setup(struct serial_private *priv, switch (pdev->device) { case PCI_DEVICE_ID_INTEL_BYT_UART1: case PCI_DEVICE_ID_INTEL_BSW_UART1: + case PCI_DEVICE_ID_INTEL_BDW_UART1: rx_param->src_id = 3; tx_param->dst_id = 2; break; case PCI_DEVICE_ID_INTEL_BYT_UART2: case PCI_DEVICE_ID_INTEL_BSW_UART2: + case PCI_DEVICE_ID_INTEL_BDW_UART2: rx_param->src_id = 5; tx_param->dst_id = 4; break; @@ -1936,6 +1941,7 @@ pci_wch_ch38x_setup(struct serial_private *priv, #define PCIE_VENDOR_ID_WCH 0x1c00 #define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 #define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 +#define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253 #define PCI_VENDOR_ID_PERICOM 0x12D8 #define PCI_DEVICE_ID_PERICOM_PI7C9X7951 0x7951 @@ -2062,6 +2068,20 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = byt_serial_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BDW_UART1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = byt_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BDW_UART2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = byt_serial_setup, + }, /* * ITE */ @@ -2618,6 +2638,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_wch_ch353_setup, }, + /* WCH CH382 2S card (16850 clone) */ + { + .vendor = PCIE_VENDOR_ID_WCH, + .device = PCIE_DEVICE_ID_WCH_CH382_2S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch38x_setup, + }, /* WCH CH382 2S1P card (16850 clone) */ { .vendor = PCIE_VENDOR_ID_WCH, @@ -2936,6 +2964,7 @@ enum pci_board_num_t { pbn_fintek_4, pbn_fintek_8, pbn_fintek_12, + pbn_wch382_2, pbn_wch384_4, pbn_pericom_PI7C9X7951, pbn_pericom_PI7C9X7952, @@ -3756,6 +3785,13 @@ static struct pciserial_board pci_boards[] = { .base_baud = 115200, .first_offset = 0x40, }, + [pbn_wch382_2] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + .first_offset = 0xC0, + }, [pbn_wch384_4] = { .flags = FL_BASE0, .num_ports = 4, @@ -5506,6 +5542,16 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, pbn_byt }, + /* Intel Broadwell */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART1, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, + pbn_byt }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART2, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, + pbn_byt }, + /* * Intel Quark x1000 */ @@ -5545,6 +5591,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, + { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_wch382_2 }, + { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_wch384_4 }, diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index b645f9228ed7..fa49eb1e2fa2 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1165,7 +1165,7 @@ serial_omap_type(struct uart_port *port) #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -static void wait_for_xmitr(struct uart_omap_port *up) +static void __maybe_unused wait_for_xmitr(struct uart_omap_port *up) { unsigned int status, tmout = 10000; @@ -1343,7 +1343,7 @@ static inline void serial_omap_add_console_port(struct uart_omap_port *up) /* Enable or disable the rs485 support */ static int -serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) +serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) { struct uart_omap_port *up = to_uart_omap_port(port); unsigned int mode; @@ -1356,8 +1356,12 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) up->ier = 0; serial_out(up, UART_IER, 0); + /* Clamp the delays to [0, 100ms] */ + rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U); + rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U); + /* store new config */ - port->rs485 = *rs485conf; + port->rs485 = *rs485; /* * Just as a precaution, only allow rs485 |