diff options
Diffstat (limited to 'drivers/tty')
68 files changed, 2536 insertions, 1711 deletions
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index 87f6578c6f4a..d4a1331675ed 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -1577,15 +1577,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp) #endif /* - * If the port is the middle of closing, bail out now - */ - if (info->port.flags & ASYNC_CLOSING) { - wait_event_interruptible_tty(tty, info->port.close_wait, - !(info->port.flags & ASYNC_CLOSING)); - return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; - } - - /* * Start up serial port */ retval = cy_startup(info, tty); diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig index 2509d057b99c..574da15fe618 100644 --- a/drivers/tty/hvc/Kconfig +++ b/drivers/tty/hvc/Kconfig @@ -81,7 +81,7 @@ config HVC_UDBG config HVC_DCC bool "ARM JTAG DCC console" - depends on ARM + depends on ARM || ARM64 select HVC_DRIVER help This console uses the JTAG DCC on ARM to create a console under the HVC diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index 4e9c4cc9e1b5..e46d628998f5 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -29,7 +29,7 @@ #include <linux/kernel.h> #include <linux/kthread.h> #include <linux/list.h> -#include <linux/module.h> +#include <linux/init.h> #include <linux/major.h> #include <linux/atomic.h> #include <linux/sysrq.h> @@ -418,7 +418,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp) * there is no buffered data otherwise sleeps on a wait queue * waking periodically to check chars_in_buffer(). */ - tty_wait_until_sent_from_close(tty, HVC_CLOSE_WAIT); + tty_wait_until_sent(tty, HVC_CLOSE_WAIT); } else { if (hp->port.count < 0) printk(KERN_ERR "hvc_close %X: oops, count is %d\n", @@ -1005,19 +1005,3 @@ put_tty: out: return err; } - -/* This isn't particularly necessary due to this being a console driver - * but it is nice to be thorough. - */ -static void __exit hvc_exit(void) -{ - if (hvc_driver) { - kthread_stop(hvc_task); - - tty_unregister_driver(hvc_driver); - /* return tty_struct instances allocated in hvc_init(). */ - put_tty_driver(hvc_driver); - unregister_console(&hvc_console); - } -} -module_exit(hvc_exit); diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c index 809920d80a66..82f240fb98f0 100644 --- a/drivers/tty/hvc/hvc_dcc.c +++ b/drivers/tty/hvc/hvc_dcc.c @@ -70,20 +70,27 @@ static const struct hv_ops hvc_dcc_get_put_ops = { static int __init hvc_dcc_console_init(void) { + int ret; + if (!hvc_dcc_check()) return -ENODEV; - hvc_instantiate(0, 0, &hvc_dcc_get_put_ops); - return 0; + /* Returns -1 if error */ + ret = hvc_instantiate(0, 0, &hvc_dcc_get_put_ops); + + return ret < 0 ? -ENODEV : 0; } console_initcall(hvc_dcc_console_init); static int __init hvc_dcc_init(void) { + struct hvc_struct *p; + if (!hvc_dcc_check()) return -ENODEV; - hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128); - return 0; + p = hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128); + + return PTR_ERR_OR_ZERO(p); } device_initcall(hvc_dcc_init); diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c index bb809cf36617..8b70a1627356 100644 --- a/drivers/tty/hvc/hvc_iucv.c +++ b/drivers/tty/hvc/hvc_iucv.c @@ -88,8 +88,8 @@ struct iucv_tty_buffer { }; /* IUCV callback handler */ -static int hvc_iucv_path_pending(struct iucv_path *, u8[8], u8[16]); -static void hvc_iucv_path_severed(struct iucv_path *, u8[16]); +static int hvc_iucv_path_pending(struct iucv_path *, u8 *, u8 *); +static void hvc_iucv_path_severed(struct iucv_path *, u8 *); static void hvc_iucv_msg_pending(struct iucv_path *, struct iucv_message *); static void hvc_iucv_msg_complete(struct iucv_path *, struct iucv_message *); @@ -782,8 +782,8 @@ static int hvc_iucv_filter_connreq(u8 ipvmid[8]) * * Locking: struct hvc_iucv_private->lock */ -static int hvc_iucv_path_pending(struct iucv_path *path, - u8 ipvmid[8], u8 ipuser[16]) +static int hvc_iucv_path_pending(struct iucv_path *path, u8 *ipvmid, + u8 *ipuser) { struct hvc_iucv_private *priv, *tmp; u8 wildcard[9] = "lnxhvc "; @@ -881,7 +881,7 @@ out_path_handled: * * Locking: struct hvc_iucv_private->lock */ -static void hvc_iucv_path_severed(struct iucv_path *path, u8 ipuser[16]) +static void hvc_iucv_path_severed(struct iucv_path *path, u8 *ipuser) { struct hvc_iucv_private *priv = path->private; diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index 10beb1589d83..fa816b7193b6 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -230,7 +230,7 @@ static int xen_hvm_console_init(void) if (r < 0 || v == 0) goto err; gfn = v; - info->intf = xen_remap(gfn << PAGE_SHIFT, PAGE_SIZE); + info->intf = xen_remap(gfn << XEN_PAGE_SHIFT, XEN_PAGE_SIZE); if (info->intf == NULL) goto err; info->vtermno = HVC_COOKIE; @@ -472,7 +472,7 @@ static int xencons_resume(struct xenbus_device *dev) struct xencons_info *info = dev_get_drvdata(&dev->dev); xencons_disconnect_backend(info); - memset(info->intf, 0, PAGE_SIZE); + memset(info->intf, 0, XEN_PAGE_SIZE); return xencons_connect_backend(dev, info); } diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index f7ff97c0ad34..5997b1731111 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -1230,7 +1230,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp) irq = hvcsd->vdev->irq; spin_unlock_irqrestore(&hvcsd->lock, flags); - tty_wait_until_sent_from_close(tty, HVCS_CLOSE_WAIT); + tty_wait_until_sent(tty, HVCS_CLOSE_WAIT); /* * This line is important because it tells hvcs_open that this diff --git a/drivers/tty/mips_ejtag_fdc.c b/drivers/tty/mips_ejtag_fdc.c index a8c8cfd52a23..a119176a1855 100644 --- a/drivers/tty/mips_ejtag_fdc.c +++ b/drivers/tty/mips_ejtag_fdc.c @@ -977,7 +977,7 @@ static int mips_ejtag_fdc_tty_probe(struct mips_cdmm_device *dev) /* Try requesting the IRQ */ if (priv->irq >= 0) { /* - * IRQF_SHARED, IRQF_NO_SUSPEND: The FDC IRQ may be shared with + * IRQF_SHARED, IRQF_COND_SUSPEND: The FDC IRQ may be shared with * other local interrupts such as the timer which sets * IRQF_TIMER (including IRQF_NO_SUSPEND). * @@ -987,7 +987,7 @@ static int mips_ejtag_fdc_tty_probe(struct mips_cdmm_device *dev) */ ret = devm_request_irq(priv->dev, priv->irq, mips_ejtag_fdc_isr, IRQF_PERCPU | IRQF_SHARED | - IRQF_NO_THREAD | IRQF_NO_SUSPEND, + IRQF_NO_THREAD | IRQF_COND_SUSPEND, priv->fdc_name, priv); if (ret) priv->irq = -1; @@ -1048,38 +1048,6 @@ err_destroy_ports: return ret; } -static int mips_ejtag_fdc_tty_remove(struct mips_cdmm_device *dev) -{ - struct mips_ejtag_fdc_tty *priv = mips_cdmm_get_drvdata(dev); - struct mips_ejtag_fdc_tty_port *dport; - int nport; - unsigned int cfg; - - if (priv->irq >= 0) { - raw_spin_lock_irq(&priv->lock); - cfg = mips_ejtag_fdc_read(priv, REG_FDCFG); - /* Disable interrupts */ - cfg &= ~(REG_FDCFG_TXINTTHRES | REG_FDCFG_RXINTTHRES); - cfg |= REG_FDCFG_TXINTTHRES_DISABLED; - cfg |= REG_FDCFG_RXINTTHRES_DISABLED; - mips_ejtag_fdc_write(priv, REG_FDCFG, cfg); - raw_spin_unlock_irq(&priv->lock); - } else { - priv->removing = true; - del_timer_sync(&priv->poll_timer); - } - kthread_stop(priv->thread); - if (dev->cpu == 0) - mips_ejtag_fdc_con.tty_drv = NULL; - tty_unregister_driver(priv->driver); - for (nport = 0; nport < NUM_TTY_CHANNELS; nport++) { - dport = &priv->ports[nport]; - tty_port_destroy(&dport->port); - } - put_tty_driver(priv->driver); - return 0; -} - static int mips_ejtag_fdc_tty_cpu_down(struct mips_cdmm_device *dev) { struct mips_ejtag_fdc_tty *priv = mips_cdmm_get_drvdata(dev); @@ -1152,12 +1120,11 @@ static struct mips_cdmm_driver mips_ejtag_fdc_tty_driver = { .name = "mips_ejtag_fdc", }, .probe = mips_ejtag_fdc_tty_probe, - .remove = mips_ejtag_fdc_tty_remove, .cpu_down = mips_ejtag_fdc_tty_cpu_down, .cpu_up = mips_ejtag_fdc_tty_cpu_up, .id_table = mips_ejtag_fdc_tty_ids, }; -module_mips_cdmm_driver(mips_ejtag_fdc_tty_driver); +builtin_mips_cdmm_driver(mips_ejtag_fdc_tty_driver); static int __init mips_ejtag_fdc_init_console(void) { diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c index 8b157d68a03e..345111467b85 100644 --- a/drivers/tty/n_r3964.c +++ b/drivers/tty/n_r3964.c @@ -276,7 +276,7 @@ static void remove_from_tx_queue(struct r3964_info *pInfo, int error_code) add_msg(pHeader->owner, R3964_MSG_ACK, pHeader->length, error_code, NULL); } - wake_up_interruptible(&pInfo->read_wait); + wake_up_interruptible(&pInfo->tty->read_wait); } spin_lock_irqsave(&pInfo->lock, flags); @@ -542,7 +542,7 @@ static void on_receive_block(struct r3964_info *pInfo) pBlock); } } - wake_up_interruptible(&pInfo->read_wait); + wake_up_interruptible(&pInfo->tty->read_wait); pInfo->state = R3964_IDLE; @@ -978,8 +978,8 @@ static int r3964_open(struct tty_struct *tty) } spin_lock_init(&pInfo->lock); + mutex_init(&pInfo->read_lock); pInfo->tty = tty; - init_waitqueue_head(&pInfo->read_wait); pInfo->priority = R3964_MASTER; pInfo->rx_first = pInfo->rx_last = NULL; pInfo->tx_first = pInfo->tx_last = NULL; @@ -1045,7 +1045,6 @@ static void r3964_close(struct tty_struct *tty) } /* Free buffers: */ - wake_up_interruptible(&pInfo->read_wait); kfree(pInfo->rx_buf); TRACE_M("r3964_close - rx_buf kfree %p", pInfo->rx_buf); kfree(pInfo->tx_buf); @@ -1065,7 +1064,16 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, TRACE_L("read()"); - tty_lock(tty); + /* + * Internal serialization of reads. + */ + if (file->f_flags & O_NONBLOCK) { + if (!mutex_trylock(&pInfo->read_lock)) + return -EAGAIN; + } else { + if (mutex_lock_interruptible(&pInfo->read_lock)) + return -ERESTARTSYS; + } pClient = findClient(pInfo, task_pid(current)); if (pClient) { @@ -1077,7 +1085,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, goto unlock; } /* block until there is a message: */ - wait_event_interruptible_tty(tty, pInfo->read_wait, + wait_event_interruptible(tty->read_wait, (pMsg = remove_msg(pInfo, pClient))); } @@ -1107,7 +1115,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, } ret = -EPERM; unlock: - tty_unlock(tty); + mutex_unlock(&pInfo->read_lock); return ret; } @@ -1156,8 +1164,6 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, pHeader->locks = 0; pHeader->owner = NULL; - tty_lock(tty); - pClient = findClient(pInfo, task_pid(current)); if (pClient) { pHeader->owner = pClient; @@ -1175,8 +1181,6 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, add_tx_queue(pInfo, pHeader); trigger_transmit(pInfo); - tty_unlock(tty); - return 0; } @@ -1227,7 +1231,7 @@ static unsigned int r3964_poll(struct tty_struct *tty, struct file *file, pClient = findClient(pInfo, task_pid(current)); if (pClient) { - poll_wait(file, &pInfo->read_wait, wait); + poll_wait(file, &tty->read_wait, wait); spin_lock_irqsave(&pInfo->lock, flags); pMsg = pClient->first_msg; spin_unlock_irqrestore(&pInfo->lock, flags); diff --git a/drivers/tty/n_tracerouter.c b/drivers/tty/n_tracerouter.c index 1f063d3aa32f..ac5716979bc1 100644 --- a/drivers/tty/n_tracerouter.c +++ b/drivers/tty/n_tracerouter.c @@ -34,7 +34,7 @@ #include <linux/string.h> #include <linux/mutex.h> #include <linux/slab.h> -#include <asm-generic/bug.h> +#include <linux/bug.h> #include "n_tracesink.h" /* diff --git a/drivers/tty/n_tracesink.c b/drivers/tty/n_tracesink.c index ddce58b973d2..4616870a6b1b 100644 --- a/drivers/tty/n_tracesink.c +++ b/drivers/tty/n_tracesink.c @@ -34,7 +34,7 @@ #include <linux/tty_ldisc.h> #include <linux/errno.h> #include <linux/string.h> -#include <asm-generic/bug.h> +#include <linux/bug.h> #include "n_tracesink.h" /* diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 20932cc9c8f7..13844261cd5f 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -201,7 +201,7 @@ static void n_tty_kick_worker(struct tty_struct *tty) */ WARN_RATELIMIT(test_bit(TTY_LDISC_HALTED, &tty->flags), "scheduling buffer work for halted ldisc\n"); - queue_work(system_unbound_wq, &tty->port->buf.work); + tty_buffer_restart_work(tty->port); } } @@ -343,8 +343,7 @@ static void n_tty_packet_mode_flush(struct tty_struct *tty) spin_lock_irqsave(&tty->ctrl_lock, flags); tty->ctrl_status |= TIOCPKT_FLUSHREAD; spin_unlock_irqrestore(&tty->ctrl_lock, flags); - if (waitqueue_active(&tty->link->read_wait)) - wake_up_interruptible(&tty->link->read_wait); + wake_up_interruptible(&tty->link->read_wait); } } @@ -1180,8 +1179,6 @@ static void n_tty_receive_break(struct tty_struct *tty) put_tty_queue('\0', ldata); } put_tty_queue('\0', ldata); - if (waitqueue_active(&tty->read_wait)) - wake_up_interruptible_poll(&tty->read_wait, POLLIN); } /** @@ -1238,8 +1235,6 @@ static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c) put_tty_queue('\0', ldata); } else put_tty_queue(c, ldata); - if (waitqueue_active(&tty->read_wait)) - wake_up_interruptible_poll(&tty->read_wait, POLLIN); } static void @@ -1382,8 +1377,7 @@ handle_newline: put_tty_queue(c, ldata); smp_store_release(&ldata->canon_head, ldata->read_head); kill_fasync(&tty->fasync, SIGIO, POLL_IN); - if (waitqueue_active(&tty->read_wait)) - wake_up_interruptible_poll(&tty->read_wait, POLLIN); + wake_up_interruptible_poll(&tty->read_wait, POLLIN); return 0; } } @@ -1667,8 +1661,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, if ((read_cnt(ldata) >= ldata->minimum_to_wake) || L_EXTPROC(tty)) { kill_fasync(&tty->fasync, SIGIO, POLL_IN); - if (waitqueue_active(&tty->read_wait)) - wake_up_interruptible_poll(&tty->read_wait, POLLIN); + wake_up_interruptible_poll(&tty->read_wait, POLLIN); } } @@ -1887,10 +1880,8 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) } /* The termios change make the tty ready for I/O */ - if (waitqueue_active(&tty->write_wait)) - wake_up_interruptible(&tty->write_wait); - if (waitqueue_active(&tty->read_wait)) - wake_up_interruptible(&tty->read_wait); + wake_up_interruptible(&tty->write_wait); + wake_up_interruptible(&tty->read_wait); } /** @@ -2147,37 +2138,15 @@ extern ssize_t redirected_tty_write(struct file *, const char __user *, static int job_control(struct tty_struct *tty, struct file *file) { - struct pid *pgrp; - /* Job control check -- must be done at start and after every sleep (POSIX.1 7.1.1.4). */ /* NOTE: not yet done after every sleep pending a thorough check of the logic of this change. -- jlc */ /* don't stop on /dev/console */ - if (file->f_op->write == redirected_tty_write || - current->signal->tty != tty) + if (file->f_op->write == redirected_tty_write) return 0; - rcu_read_lock(); - pgrp = task_pgrp(current); - - spin_lock_irq(&tty->ctrl_lock); - if (!tty->pgrp) - printk(KERN_ERR "n_tty_read: no tty->pgrp!\n"); - else if (pgrp != tty->pgrp) { - spin_unlock_irq(&tty->ctrl_lock); - if (is_ignored(SIGTTIN) || is_current_pgrp_orphaned()) { - rcu_read_unlock(); - return -EIO; - } - kill_pgrp(pgrp, SIGTTIN, 1); - rcu_read_unlock(); - set_thread_flag(TIF_SIGPENDING); - return -ERESTARTSYS; - } - spin_unlock_irq(&tty->ctrl_lock); - rcu_read_unlock(); - return 0; + return __tty_check_change(tty, SIGTTIN); } diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 4d5937c185c1..a45660f62db5 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -7,7 +7,6 @@ */ #include <linux/module.h> - #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/tty.h> @@ -501,6 +500,10 @@ static int pty_bsd_ioctl(struct tty_struct *tty, } static int legacy_count = CONFIG_LEGACY_PTY_COUNT; +/* + * not really modular, but the easiest way to keep compat with existing + * bootargs behaviour is to continue using module_param here. + */ module_param(legacy_count, int, 0); /* @@ -877,4 +880,4 @@ static int __init pty_init(void) unix98_pty_init(); return 0; } -module_init(pty_init); +device_initcall(pty_init); diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index c8dd8dc31086..802eac7e561b 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -895,14 +895,6 @@ static int rp_open(struct tty_struct *tty, struct file *filp) if (!page) return -ENOMEM; - if (port->flags & ASYNC_CLOSING) { - retval = wait_for_completion_interruptible(&info->close_wait); - free_page(page); - if (retval) - return retval; - return ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); - } - /* * We must not sleep from here until the port is marked fully in use. */ @@ -1057,7 +1049,6 @@ static void rp_close(struct tty_struct *tty, struct file *filp) mutex_unlock(&port->mutex); tty_port_tty_set(port, NULL); - wake_up_interruptible(&port->close_wait); complete_all(&info->close_wait); atomic_dec(&rp_num_ports_open); @@ -1511,10 +1502,6 @@ static void rp_hangup(struct tty_struct *tty) #endif rp_flush_buffer(tty); spin_lock_irqsave(&info->port.lock, flags); - if (info->port.flags & ASYNC_CLOSING) { - spin_unlock_irqrestore(&info->port.lock, flags); - return; - } if (info->port.count) atomic_dec(&rp_num_ports_open); clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]); diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index 748c18f8c8cd..0140ba4aacde 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -560,8 +560,8 @@ static void rs_fair_output(void) struct m68k_serial *info = &m68k_soft[0]; char c; - if (info == 0) return; - if (info->xmit_buf == 0) return; + if (info == NULL) return; + if (info->xmit_buf == NULL) return; local_irq_save(flags); left = info->xmit_cnt; @@ -1071,7 +1071,6 @@ static void rs_close(struct tty_struct *tty, struct file * filp) wake_up_interruptible(&port->open_wait); } port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&port->close_wait); local_irq_restore(flags); } diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 271d12137649..39126460c1f5 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -569,6 +569,9 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; + if (up->port.type == PORT_8250_CIR) + continue; + if (up->port.dev) continue; @@ -1027,13 +1030,24 @@ int serial8250_register_8250_port(struct uart_8250_port *up) if (up->dl_write) uart->dl_write = up->dl_write; - if (serial8250_isa_config != NULL) - serial8250_isa_config(0, &uart->port, - &uart->capabilities); + if (uart->port.type != PORT_8250_CIR) { + if (serial8250_isa_config != NULL) + serial8250_isa_config(0, &uart->port, + &uart->capabilities); + + ret = uart_add_one_port(&serial8250_reg, + &uart->port); + if (ret == 0) + ret = uart->port.line; + } else { + dev_info(uart->port.dev, + "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n", + uart->port.iobase, + (unsigned long long)uart->port.mapbase, + uart->port.irq); - ret = uart_add_one_port(&serial8250_reg, &uart->port); - if (ret == 0) - ret = uart->port.line; + ret = 0; + } } mutex_unlock(&serial_mutex); diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index 21d01a491405..78259d3c6a55 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -54,9 +54,6 @@ static void __dma_rx_complete(void *param) struct dma_tx_state state; int count; - dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr, - dma->rx_size, DMA_FROM_DEVICE); - dma->rx_running = 0; dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); @@ -80,10 +77,6 @@ int serial8250_tx_dma(struct uart_8250_port *p) return 0; dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - if (dma->tx_size < p->port.fifosize) { - ret = -EINVAL; - goto err; - } desc = dmaengine_prep_slave_single(dma->txchan, dma->tx_addr + xmit->tail, @@ -156,9 +149,6 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir) dma->rx_cookie = dmaengine_submit(desc); - dma_sync_single_for_device(dma->rxchan->device->dev, dma->rx_addr, - dma->rx_size, DMA_FROM_DEVICE); - dma_async_issue_pending(dma->rxchan); return 0; diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 06324f17a0cb..a5d319e4aae6 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -63,6 +63,9 @@ struct dw8250_data { struct clk *pclk; struct reset_control *rst; struct uart_8250_dma dma; + + unsigned int skip_autocfg:1; + unsigned int uart_16550_compatible:1; }; #define BYT_PRV_CLK 0x800 @@ -224,10 +227,6 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, if (IS_ERR(d->clk) || !old) goto out; - /* Not requesting clock rates below 1.8432Mhz */ - if (baud < 115200) - baud = 115200; - clk_disable_unprepare(d->clk); rate = clk_round_rate(d->clk, baud * 16); ret = clk_set_rate(d->clk, rate); @@ -244,24 +243,77 @@ out: serial8250_do_set_termios(p, termios, old); } -static bool dw8250_dma_filter(struct dma_chan *chan, void *param) +/* + * dw8250_fallback_dma_filter will prevent the UART from getting just any free + * channel on platforms that have DMA engines, but don't have any channels + * assigned to the UART. + * + * REVISIT: This is a work around for limitation in the DMA Engine API. Once the + * core problem is fixed, this function is no longer needed. + */ +static bool dw8250_fallback_dma_filter(struct dma_chan *chan, void *param) { return false; } -static void dw8250_setup_port(struct uart_8250_port *up) +static bool dw8250_idma_filter(struct dma_chan *chan, void *param) +{ + return param == chan->device->dev->parent; +} + +static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) { - struct uart_port *p = &up->port; - u32 reg = readl(p->membase + DW_UART_UCV); + if (p->dev->of_node) { + struct device_node *np = p->dev->of_node; + int id; + + /* get index of serial line, if found in DT aliases */ + id = of_alias_get_id(np, "serial"); + if (id >= 0) + p->line = id; +#ifdef CONFIG_64BIT + if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) { + p->serial_in = dw8250_serial_inq; + p->serial_out = dw8250_serial_outq; + p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; + p->type = PORT_OCTEON; + data->usr_reg = 0x27; + data->skip_autocfg = true; + } +#endif + } else if (has_acpi_companion(p->dev)) { + p->iotype = UPIO_MEM32; + p->regshift = 2; + p->serial_in = dw8250_serial_in32; + p->set_termios = dw8250_set_termios; + /* So far none of there implement the Busy Functionality */ + data->uart_16550_compatible = true; + } + + /* Platforms with iDMA */ + if (platform_get_resource_byname(to_platform_device(p->dev), + IORESOURCE_MEM, "lpss_priv")) { + p->set_termios = dw8250_set_termios; + data->dma.rx_param = p->dev->parent; + data->dma.tx_param = p->dev->parent; + data->dma.fn = dw8250_idma_filter; + } +} + +static void dw8250_setup_port(struct uart_port *p) +{ + struct uart_8250_port *up = up_to_u8250p(p); + u32 reg; /* * If the Component Version Register returns zero, we know that * ADDITIONAL_FEATURES are not enabled. No need to go any further. */ + reg = readl(p->membase + DW_UART_UCV); if (!reg) return; - dev_dbg_ratelimited(p->dev, "Designware UART version %c.%c%c\n", + dev_dbg(p->dev, "Designware UART version %c.%c%c\n", (reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff); reg = readl(p->membase + DW_UART_CPR); @@ -273,7 +325,6 @@ static void dw8250_setup_port(struct uart_8250_port *up) p->type = PORT_16550A; p->flags |= UPF_FIXED_TYPE; p->fifosize = DW_UART_CPR_FIFO_SIZE(reg); - up->tx_loadsz = p->fifosize; up->capabilities = UART_CAP_FIFO; } @@ -281,166 +332,91 @@ static void dw8250_setup_port(struct uart_8250_port *up) up->capabilities |= UART_CAP_AFE; } -static int dw8250_probe_of(struct uart_port *p, - struct dw8250_data *data) +static int dw8250_probe(struct platform_device *pdev) { - struct device_node *np = p->dev->of_node; - struct uart_8250_port *up = up_to_u8250p(p); - u32 val; - bool has_ucv = true; - int id; + struct uart_8250_port uart = {}; + struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int irq = platform_get_irq(pdev, 0); + struct uart_port *p = &uart.port; + struct dw8250_data *data; + int err; + u32 val; -#ifdef CONFIG_64BIT - if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) { - p->serial_in = dw8250_serial_inq; - p->serial_out = dw8250_serial_outq; - p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; - p->type = PORT_OCTEON; - data->usr_reg = 0x27; - has_ucv = false; - } else -#endif - if (!of_property_read_u32(np, "reg-io-width", &val)) { - switch (val) { - case 1: - break; - case 4: - p->iotype = UPIO_MEM32; - p->serial_in = dw8250_serial_in32; - p->serial_out = dw8250_serial_out32; - break; - default: - dev_err(p->dev, "unsupported reg-io-width (%u)\n", val); - return -EINVAL; - } + if (!regs) { + dev_err(&pdev->dev, "no registers defined\n"); + return -EINVAL; } - if (has_ucv) - dw8250_setup_port(up); - - /* if we have a valid fifosize, try hooking up DMA here */ - if (p->fifosize) { - up->dma = &data->dma; - up->dma->rxconf.src_maxburst = p->fifosize / 4; - up->dma->txconf.dst_maxburst = p->fifosize / 4; + if (irq < 0) { + if (irq != -EPROBE_DEFER) + dev_err(&pdev->dev, "cannot get irq\n"); + return irq; } - if (!of_property_read_u32(np, "reg-shift", &val)) + spin_lock_init(&p->lock); + p->mapbase = regs->start; + p->irq = irq; + p->handle_irq = dw8250_handle_irq; + p->pm = dw8250_do_pm; + p->type = PORT_8250; + p->flags = UPF_SHARE_IRQ | UPF_FIXED_PORT; + p->dev = &pdev->dev; + p->iotype = UPIO_MEM; + p->serial_in = dw8250_serial_in; + p->serial_out = dw8250_serial_out; + + p->membase = devm_ioremap(&pdev->dev, regs->start, resource_size(regs)); + if (!p->membase) + return -ENOMEM; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->dma.fn = dw8250_fallback_dma_filter; + data->usr_reg = DW_UART_USR; + p->private_data = data; + + data->uart_16550_compatible = device_property_read_bool(p->dev, + "snps,uart-16550-compatible"); + + err = device_property_read_u32(p->dev, "reg-shift", &val); + if (!err) p->regshift = val; - /* get index of serial line, if found in DT aliases */ - id = of_alias_get_id(np, "serial"); - if (id >= 0) - p->line = id; + err = device_property_read_u32(p->dev, "reg-io-width", &val); + if (!err && val == 4) { + p->iotype = UPIO_MEM32; + p->serial_in = dw8250_serial_in32; + p->serial_out = dw8250_serial_out32; + } - if (of_property_read_bool(np, "dcd-override")) { + if (device_property_read_bool(p->dev, "dcd-override")) { /* Always report DCD as active */ data->msr_mask_on |= UART_MSR_DCD; data->msr_mask_off |= UART_MSR_DDCD; } - if (of_property_read_bool(np, "dsr-override")) { + if (device_property_read_bool(p->dev, "dsr-override")) { /* Always report DSR as active */ data->msr_mask_on |= UART_MSR_DSR; data->msr_mask_off |= UART_MSR_DDSR; } - if (of_property_read_bool(np, "cts-override")) { + if (device_property_read_bool(p->dev, "cts-override")) { /* Always report CTS as active */ data->msr_mask_on |= UART_MSR_CTS; data->msr_mask_off |= UART_MSR_DCTS; } - if (of_property_read_bool(np, "ri-override")) { + if (device_property_read_bool(p->dev, "ri-override")) { /* Always report Ring indicator as inactive */ data->msr_mask_off |= UART_MSR_RI; data->msr_mask_off |= UART_MSR_TERI; } - return 0; -} - -static bool dw8250_idma_filter(struct dma_chan *chan, void *param) -{ - struct device *dev = param; - - if (dev != chan->device->dev->parent) - return false; - - return true; -} - -static int dw8250_probe_acpi(struct uart_8250_port *up, - struct dw8250_data *data) -{ - struct uart_port *p = &up->port; - - dw8250_setup_port(up); - - p->iotype = UPIO_MEM32; - p->serial_in = dw8250_serial_in32; - p->serial_out = dw8250_serial_out32; - p->regshift = 2; - - /* Platforms with iDMA */ - if (platform_get_resource_byname(to_platform_device(up->port.dev), - IORESOURCE_MEM, "lpss_priv")) { - data->dma.rx_param = up->port.dev->parent; - data->dma.tx_param = up->port.dev->parent; - data->dma.fn = dw8250_idma_filter; - } - - up->dma = &data->dma; - up->dma->rxconf.src_maxburst = p->fifosize / 4; - up->dma->txconf.dst_maxburst = p->fifosize / 4; - - up->port.set_termios = dw8250_set_termios; - - return 0; -} - -static int dw8250_probe(struct platform_device *pdev) -{ - struct uart_8250_port uart = {}; - struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - int irq = platform_get_irq(pdev, 0); - struct dw8250_data *data; - int err; - - if (!regs) { - dev_err(&pdev->dev, "no registers defined\n"); - return -EINVAL; - } - - if (irq < 0) { - if (irq != -EPROBE_DEFER) - dev_err(&pdev->dev, "cannot get irq\n"); - return irq; - } - - spin_lock_init(&uart.port.lock); - uart.port.mapbase = regs->start; - uart.port.irq = irq; - uart.port.handle_irq = dw8250_handle_irq; - uart.port.pm = dw8250_do_pm; - uart.port.type = PORT_8250; - uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; - uart.port.dev = &pdev->dev; - - uart.port.membase = devm_ioremap(&pdev->dev, regs->start, - resource_size(regs)); - if (!uart.port.membase) - return -ENOMEM; - - data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->usr_reg = DW_UART_USR; - /* Always ask for fixed clock rate from a property. */ - device_property_read_u32(&pdev->dev, "clock-frequency", - &uart.port.uartclk); + device_property_read_u32(p->dev, "clock-frequency", &p->uartclk); /* If there is separate baudclk, get the rate from it. */ data->clk = devm_clk_get(&pdev->dev, "baudclk"); @@ -454,11 +430,11 @@ static int dw8250_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "could not enable optional baudclk: %d\n", err); else - uart.port.uartclk = clk_get_rate(data->clk); + p->uartclk = clk_get_rate(data->clk); } /* If no clock rate is defined, fail. */ - if (!uart.port.uartclk) { + if (!p->uartclk) { dev_err(&pdev->dev, "clock rate not defined\n"); return -EINVAL; } @@ -484,26 +460,22 @@ static int dw8250_probe(struct platform_device *pdev) if (!IS_ERR(data->rst)) reset_control_deassert(data->rst); - data->dma.rx_param = data; - data->dma.tx_param = data; - data->dma.fn = dw8250_dma_filter; + dw8250_quirks(p, data); - uart.port.iotype = UPIO_MEM; - uart.port.serial_in = dw8250_serial_in; - uart.port.serial_out = dw8250_serial_out; - uart.port.private_data = data; + /* If the Busy Functionality is not implemented, don't handle it */ + if (data->uart_16550_compatible) { + p->serial_out = NULL; + p->handle_irq = NULL; + } - if (pdev->dev.of_node) { - err = dw8250_probe_of(&uart.port, data); - if (err) - goto err_reset; - } else if (ACPI_HANDLE(&pdev->dev)) { - err = dw8250_probe_acpi(&uart, data); - if (err) - goto err_reset; - } else { - err = -ENODEV; - goto err_reset; + if (!data->skip_autocfg) + dw8250_setup_port(p); + + /* If we have a valid fifosize, try hooking up DMA */ + if (p->fifosize) { + data->dma.rxconf.src_maxburst = p->fifosize / 4; + data->dma.txconf.dst_maxburst = p->fifosize / 4; + uart.dma = &data->dma; } data->line = serial8250_register_8250_port(&uart); diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index faed05f25bc2..ceb85792a5cf 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -29,6 +29,8 @@ #include <linux/tty.h> #include <linux/init.h> #include <linux/console.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/serial_reg.h> #include <linux/serial.h> #include <linux/serial_8250.h> @@ -152,3 +154,5 @@ int __init early_serial8250_setup(struct earlycon_device *device, } EARLYCON_DECLARE(uart8250, early_serial8250_setup); EARLYCON_DECLARE(uart, early_serial8250_setup); +OF_EARLYCON_DECLARE(ns16550, "ns16550", early_serial8250_setup); +OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup); diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index 7c1e4be48e7b..49394b4c5cfd 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -21,19 +21,33 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_fdt.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/serial_reg.h> +#include "8250.h" + +/** ingenic_uart_config: SOC specific config data. */ +struct ingenic_uart_config { + int tx_loadsz; + int fifosize; +}; + struct ingenic_uart_data { struct clk *clk_module; struct clk *clk_baud; int line; }; +static const struct of_device_id of_match[]; + #define UART_FCR_UME BIT(4) +#define UART_MCR_MDCE BIT(7) +#define UART_MCR_FCM BIT(6) + static struct earlycon_device *early_device; static uint8_t __init early_in(struct uart_port *port, int offset) @@ -129,6 +143,8 @@ OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart", static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) { + int ier; + switch (offset) { case UART_FCR: /* UART module enable */ @@ -136,9 +152,22 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) break; case UART_IER: + /* Enable receive timeout interrupt with the + * receive line status interrupt */ value |= (value & 0x4) << 2; break; + case UART_MCR: + /* If we have enabled modem status IRQs we should enable modem + * mode. */ + ier = p->serial_in(p, UART_IER); + + if (ier & UART_IER_MSI) + value |= UART_MCR_MDCE | UART_MCR_FCM; + else + value &= ~(UART_MCR_MDCE | UART_MCR_FCM); + break; + default: break; } @@ -146,14 +175,45 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) writeb(value, p->membase + (offset << p->regshift)); } +static unsigned int ingenic_uart_serial_in(struct uart_port *p, int offset) +{ + unsigned int value; + + value = readb(p->membase + (offset << p->regshift)); + + /* Hide non-16550 compliant bits from higher levels */ + switch (offset) { + case UART_FCR: + value &= ~UART_FCR_UME; + break; + + case UART_MCR: + value &= ~(UART_MCR_MDCE | UART_MCR_FCM); + break; + + default: + break; + } + return value; +} + static int ingenic_uart_probe(struct platform_device *pdev) { struct uart_8250_port uart = {}; struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); struct ingenic_uart_data *data; + const struct ingenic_uart_config *cdata; + const struct of_device_id *match; int err, line; + match = of_match_device(of_match, &pdev->dev); + if (!match) { + dev_err(&pdev->dev, "Error: No device match found\n"); + return -ENODEV; + } + cdata = match->data; + if (!regs || !irq) { dev_err(&pdev->dev, "no registers/irq defined\n"); return -EINVAL; @@ -164,14 +224,18 @@ static int ingenic_uart_probe(struct platform_device *pdev) return -ENOMEM; spin_lock_init(&uart.port.lock); - uart.port.type = PORT_16550; + uart.port.type = PORT_16550A; uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE; uart.port.iotype = UPIO_MEM; uart.port.mapbase = regs->start; uart.port.regshift = 2; uart.port.serial_out = ingenic_uart_serial_out; + uart.port.serial_in = ingenic_uart_serial_in; uart.port.irq = irq->start; uart.port.dev = &pdev->dev; + uart.port.fifosize = cdata->fifosize; + uart.tx_loadsz = cdata->tx_loadsz; + uart.capabilities = UART_CAP_FIFO | UART_CAP_RTOIE; /* Check for a fixed line number */ line = of_alias_get_id(pdev->dev.of_node, "serial"); @@ -241,10 +305,26 @@ static int ingenic_uart_remove(struct platform_device *pdev) return 0; } +static const struct ingenic_uart_config jz4740_uart_config = { + .tx_loadsz = 8, + .fifosize = 16, +}; + +static const struct ingenic_uart_config jz4760_uart_config = { + .tx_loadsz = 16, + .fifosize = 32, +}; + +static const struct ingenic_uart_config jz4780_uart_config = { + .tx_loadsz = 32, + .fifosize = 64, +}; + static const struct of_device_id of_match[] = { - { .compatible = "ingenic,jz4740-uart" }, - { .compatible = "ingenic,jz4775-uart" }, - { .compatible = "ingenic,jz4780-uart" }, + { .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config }, + { .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config }, + { .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config }, + { .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, of_match); diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c new file mode 100644 index 000000000000..88531a36b69c --- /dev/null +++ b/drivers/tty/serial/8250/8250_mid.c @@ -0,0 +1,326 @@ +/* + * 8250_mid.c - Driver for UART on Intel Penwell and various other Intel SOCs + * + * Copyright (C) 2015 Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/rational.h> +#include <linux/module.h> +#include <linux/pci.h> + +#include <linux/dma/hsu.h> + +#include "8250.h" + +#define PCI_DEVICE_ID_INTEL_PNW_UART1 0x081b +#define PCI_DEVICE_ID_INTEL_PNW_UART2 0x081c +#define PCI_DEVICE_ID_INTEL_PNW_UART3 0x081d +#define PCI_DEVICE_ID_INTEL_TNG_UART 0x1191 +#define PCI_DEVICE_ID_INTEL_DNV_UART 0x19d8 + +/* Intel MID Specific registers */ +#define INTEL_MID_UART_PS 0x30 +#define INTEL_MID_UART_MUL 0x34 +#define INTEL_MID_UART_DIV 0x38 + +struct mid8250; + +struct mid8250_board { + unsigned long freq; + unsigned int base_baud; + int (*setup)(struct mid8250 *, struct uart_port *p); + void (*exit)(struct mid8250 *); +}; + +struct mid8250 { + int line; + int dma_index; + struct pci_dev *dma_dev; + struct uart_8250_dma dma; + struct mid8250_board *board; + struct hsu_dma_chip dma_chip; +}; + +/*****************************************************************************/ + +static int pnw_setup(struct mid8250 *mid, struct uart_port *p) +{ + struct pci_dev *pdev = to_pci_dev(p->dev); + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_PNW_UART1: + mid->dma_index = 0; + break; + case PCI_DEVICE_ID_INTEL_PNW_UART2: + mid->dma_index = 1; + break; + case PCI_DEVICE_ID_INTEL_PNW_UART3: + mid->dma_index = 2; + break; + default: + return -EINVAL; + } + + mid->dma_dev = pci_get_slot(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 3)); + return 0; +} + +static int tng_setup(struct mid8250 *mid, struct uart_port *p) +{ + struct pci_dev *pdev = to_pci_dev(p->dev); + int index = PCI_FUNC(pdev->devfn); + + /* Currently no support for HSU port0 */ + if (index-- == 0) + return -ENODEV; + + mid->dma_index = index; + mid->dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0)); + return 0; +} + +static int dnv_handle_irq(struct uart_port *p) +{ + struct mid8250 *mid = p->private_data; + int ret; + + ret = hsu_dma_irq(&mid->dma_chip, 0); + ret |= hsu_dma_irq(&mid->dma_chip, 1); + + /* For now, letting the HW generate separate interrupt for the UART */ + if (ret) + return ret; + + return serial8250_handle_irq(p, serial_port_in(p, UART_IIR)); +} + +#define DNV_DMA_CHAN_OFFSET 0x80 + +static int dnv_setup(struct mid8250 *mid, struct uart_port *p) +{ + struct hsu_dma_chip *chip = &mid->dma_chip; + struct pci_dev *pdev = to_pci_dev(p->dev); + int ret; + + chip->dev = &pdev->dev; + chip->irq = pdev->irq; + chip->regs = p->membase; + chip->length = pci_resource_len(pdev, 0); + chip->offset = DNV_DMA_CHAN_OFFSET; + + /* Falling back to PIO mode if DMA probing fails */ + ret = hsu_dma_probe(chip); + if (ret) + return 0; + + mid->dma_dev = pdev; + + p->handle_irq = dnv_handle_irq; + return 0; +} + +static void dnv_exit(struct mid8250 *mid) +{ + if (!mid->dma_dev) + return; + hsu_dma_remove(&mid->dma_chip); +} + +/*****************************************************************************/ + +static void mid8250_set_termios(struct uart_port *p, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud = tty_termios_baud_rate(termios); + struct mid8250 *mid = p->private_data; + unsigned short ps = 16; + unsigned long fuart = baud * ps; + unsigned long w = BIT(24) - 1; + unsigned long mul, div; + + if (mid->board->freq < fuart) { + /* Find prescaler value that satisfies Fuart < Fref */ + if (mid->board->freq > baud) + ps = mid->board->freq / baud; /* baud rate too high */ + else + ps = 1; /* PLL case */ + fuart = baud * ps; + } else { + /* Get Fuart closer to Fref */ + fuart *= rounddown_pow_of_two(mid->board->freq / fuart); + } + + rational_best_approximation(fuart, mid->board->freq, w, w, &mul, &div); + p->uartclk = fuart * 16 / ps; /* core uses ps = 16 always */ + + writel(ps, p->membase + INTEL_MID_UART_PS); /* set PS */ + writel(mul, p->membase + INTEL_MID_UART_MUL); /* set MUL */ + writel(div, p->membase + INTEL_MID_UART_DIV); + + serial8250_do_set_termios(p, termios, old); +} + +static bool mid8250_dma_filter(struct dma_chan *chan, void *param) +{ + struct hsu_dma_slave *s = param; + + if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id) + return false; + + chan->private = s; + return true; +} + +static int mid8250_dma_setup(struct mid8250 *mid, struct uart_8250_port *port) +{ + struct uart_8250_dma *dma = &mid->dma; + struct device *dev = port->port.dev; + struct hsu_dma_slave *rx_param; + struct hsu_dma_slave *tx_param; + + if (!mid->dma_dev) + return 0; + + rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); + if (!rx_param) + return -ENOMEM; + + tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL); + if (!tx_param) + return -ENOMEM; + + rx_param->chan_id = mid->dma_index * 2 + 1; + tx_param->chan_id = mid->dma_index * 2; + + dma->rxconf.src_maxburst = 64; + dma->txconf.dst_maxburst = 64; + + rx_param->dma_dev = &mid->dma_dev->dev; + tx_param->dma_dev = &mid->dma_dev->dev; + + dma->fn = mid8250_dma_filter; + dma->rx_param = rx_param; + dma->tx_param = tx_param; + + port->dma = dma; + return 0; +} + +static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct uart_8250_port uart; + struct mid8250 *mid; + int ret; + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + pci_set_master(pdev); + + mid = devm_kzalloc(&pdev->dev, sizeof(*mid), GFP_KERNEL); + if (!mid) + return -ENOMEM; + + mid->board = (struct mid8250_board *)id->driver_data; + + memset(&uart, 0, sizeof(struct uart_8250_port)); + + uart.port.dev = &pdev->dev; + uart.port.irq = pdev->irq; + uart.port.private_data = mid; + uart.port.type = PORT_16750; + uart.port.iotype = UPIO_MEM; + uart.port.uartclk = mid->board->base_baud * 16; + uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE; + uart.port.set_termios = mid8250_set_termios; + + uart.port.mapbase = pci_resource_start(pdev, 0); + uart.port.membase = pcim_iomap(pdev, 0, 0); + if (!uart.port.membase) + return -ENOMEM; + + if (mid->board->setup) { + ret = mid->board->setup(mid, &uart.port); + if (ret) + return ret; + } + + ret = mid8250_dma_setup(mid, &uart); + if (ret) + goto err; + + ret = serial8250_register_8250_port(&uart); + if (ret < 0) + goto err; + + mid->line = ret; + + pci_set_drvdata(pdev, mid); + return 0; +err: + if (mid->board->exit) + mid->board->exit(mid); + return ret; +} + +static void mid8250_remove(struct pci_dev *pdev) +{ + struct mid8250 *mid = pci_get_drvdata(pdev); + + if (mid->board->exit) + mid->board->exit(mid); + + serial8250_unregister_port(mid->line); +} + +static const struct mid8250_board pnw_board = { + .freq = 50000000, + .base_baud = 115200, + .setup = pnw_setup, +}; + +static const struct mid8250_board tng_board = { + .freq = 38400000, + .base_baud = 1843200, + .setup = tng_setup, +}; + +static const struct mid8250_board dnv_board = { + .freq = 133333333, + .base_baud = 115200, + .setup = dnv_setup, + .exit = dnv_exit, +}; + +#define MID_DEVICE(id, board) { PCI_VDEVICE(INTEL, id), (kernel_ulong_t)&board } + +static const struct pci_device_id pci_ids[] = { + MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART1, pnw_board), + MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART2, pnw_board), + MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART3, pnw_board), + MID_DEVICE(PCI_DEVICE_ID_INTEL_TNG_UART, tng_board), + MID_DEVICE(PCI_DEVICE_ID_INTEL_DNV_UART, dnv_board), + { }, +}; +MODULE_DEVICE_TABLE(pci, pci_ids); + +static struct pci_driver mid8250_pci_driver = { + .name = "8250_mid", + .id_table = pci_ids, + .probe = mid8250_probe, + .remove = mid8250_remove, +}; + +module_pci_driver(mid8250_pci_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel MID UART driver"); diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 826c5c4a2103..a2c0734c76e2 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -439,7 +439,6 @@ static void omap_8250_set_termios(struct uart_port *port, priv->xoff = termios->c_cc[VSTOP]; priv->efr = 0; - up->mcr &= ~(UART_MCR_RTS | UART_MCR_XONANY); up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { @@ -726,6 +725,7 @@ static void __dma_rx_do_complete(struct uart_8250_port *p, bool error) struct dma_tx_state state; int count; unsigned long flags; + int ret; dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr, dma->rx_size, DMA_FROM_DEVICE); @@ -741,8 +741,10 @@ static void __dma_rx_do_complete(struct uart_8250_port *p, bool error) count = dma->rx_size - state.residue; - tty_insert_flip_string(tty_port, dma->rx_buf, count); - p->port.icount.rx += count; + ret = tty_insert_flip_string(tty_port, dma->rx_buf, count); + + p->port.icount.rx += ret; + p->port.icount.buf_overrun += count - ret; unlock: spin_unlock_irqrestore(&priv->rx_dma_lock, flags); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 68042dd1c525..4097f3f65b3b 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -28,7 +28,6 @@ #include <linux/dmaengine.h> #include <linux/platform_data/dma-dw.h> -#include <linux/platform_data/dma-hsu.h> #include "8250.h" @@ -1508,167 +1507,6 @@ byt_serial_setup(struct serial_private *priv, return ret; } -#define INTEL_MID_UART_PS 0x30 -#define INTEL_MID_UART_MUL 0x34 -#define INTEL_MID_UART_DIV 0x38 - -static void intel_mid_set_termios(struct uart_port *p, - struct ktermios *termios, - struct ktermios *old, - unsigned long fref) -{ - unsigned int baud = tty_termios_baud_rate(termios); - unsigned short ps = 16; - unsigned long fuart = baud * ps; - unsigned long w = BIT(24) - 1; - unsigned long mul, div; - - if (fref < fuart) { - /* Find prescaler value that satisfies Fuart < Fref */ - if (fref > baud) - ps = fref / baud; /* baud rate too high */ - else - ps = 1; /* PLL case */ - fuart = baud * ps; - } else { - /* Get Fuart closer to Fref */ - fuart *= rounddown_pow_of_two(fref / fuart); - } - - rational_best_approximation(fuart, fref, w, w, &mul, &div); - p->uartclk = fuart * 16 / ps; /* core uses ps = 16 always */ - - writel(ps, p->membase + INTEL_MID_UART_PS); /* set PS */ - writel(mul, p->membase + INTEL_MID_UART_MUL); /* set MUL */ - writel(div, p->membase + INTEL_MID_UART_DIV); - - serial8250_do_set_termios(p, termios, old); -} - -static void intel_mid_set_termios_38_4M(struct uart_port *p, - struct ktermios *termios, - struct ktermios *old) -{ - intel_mid_set_termios(p, termios, old, 38400000); -} - -static void intel_mid_set_termios_50M(struct uart_port *p, - struct ktermios *termios, - struct ktermios *old) -{ - /* - * The uart clk is 50Mhz, and the baud rate come from: - * baud = 50M * MUL / (DIV * PS * DLAB) - */ - intel_mid_set_termios(p, termios, old, 50000000); -} - -static bool intel_mid_dma_filter(struct dma_chan *chan, void *param) -{ - struct hsu_dma_slave *s = param; - - if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id) - return false; - - chan->private = s; - return true; -} - -static int intel_mid_serial_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_8250_port *port, int idx, - int index, struct pci_dev *dma_dev) -{ - struct device *dev = port->port.dev; - struct uart_8250_dma *dma; - struct hsu_dma_slave *tx_param, *rx_param; - - dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); - if (!dma) - return -ENOMEM; - - tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL); - if (!tx_param) - return -ENOMEM; - - rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); - if (!rx_param) - return -ENOMEM; - - rx_param->chan_id = index * 2 + 1; - tx_param->chan_id = index * 2; - - dma->rxconf.src_maxburst = 64; - dma->txconf.dst_maxburst = 64; - - rx_param->dma_dev = &dma_dev->dev; - tx_param->dma_dev = &dma_dev->dev; - - dma->fn = intel_mid_dma_filter; - dma->rx_param = rx_param; - dma->tx_param = tx_param; - - port->port.type = PORT_16750; - port->port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE; - port->dma = dma; - - return pci_default_setup(priv, board, port, idx); -} - -#define PCI_DEVICE_ID_INTEL_PNW_UART1 0x081b -#define PCI_DEVICE_ID_INTEL_PNW_UART2 0x081c -#define PCI_DEVICE_ID_INTEL_PNW_UART3 0x081d - -static int pnw_serial_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_8250_port *port, int idx) -{ - struct pci_dev *pdev = priv->dev; - struct pci_dev *dma_dev; - int index; - - switch (pdev->device) { - case PCI_DEVICE_ID_INTEL_PNW_UART1: - index = 0; - break; - case PCI_DEVICE_ID_INTEL_PNW_UART2: - index = 1; - break; - case PCI_DEVICE_ID_INTEL_PNW_UART3: - index = 2; - break; - default: - return -EINVAL; - } - - dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 3)); - - port->port.set_termios = intel_mid_set_termios_50M; - - return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev); -} - -#define PCI_DEVICE_ID_INTEL_TNG_UART 0x1191 - -static int tng_serial_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_8250_port *port, int idx) -{ - struct pci_dev *pdev = priv->dev; - struct pci_dev *dma_dev; - int index = PCI_FUNC(pdev->devfn); - - /* Currently no support for HSU port0 */ - if (index-- == 0) - return -ENODEV; - - dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0)); - - port->port.set_termios = intel_mid_set_termios_38_4M; - - return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev); -} - static int pci_omegapci_setup(struct serial_private *priv, const struct pciserial_board *board, @@ -2212,34 +2050,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { }, { .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_PNW_UART1, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pnw_serial_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_PNW_UART2, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pnw_serial_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_PNW_UART3, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pnw_serial_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_TNG_UART, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = tng_serial_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_BSW_UART1, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, @@ -3119,8 +2929,6 @@ enum pci_board_num_t { pbn_ADDIDATA_PCIe_8_3906250, pbn_ce4100_1_115200, pbn_byt, - pbn_pnw, - pbn_tng, pbn_qrk, pbn_omegapci, pbn_NETMOS9900_2s_115200, @@ -3907,16 +3715,6 @@ static struct pciserial_board pci_boards[] = { .uart_offset = 0x80, .reg_shift = 2, }, - [pbn_pnw] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 115200, - }, - [pbn_tng] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 1843200, - }, [pbn_qrk] = { .flags = FL_BASE0, .num_ports = 1, @@ -4005,6 +3803,13 @@ static const struct pci_device_id blacklist[] = { { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */ { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */ { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */ + + /* Intel platforms with MID UART */ + { PCI_VDEVICE(INTEL, 0x081b), }, + { PCI_VDEVICE(INTEL, 0x081c), }, + { PCI_VDEVICE(INTEL, 0x081d), }, + { PCI_VDEVICE(INTEL, 0x1191), }, + { PCI_VDEVICE(INTEL, 0x19d8), }, }; /* @@ -5702,26 +5507,6 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_byt }, /* - * Intel Penwell - */ - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART1, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_pnw}, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_pnw}, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART3, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_pnw}, - - /* - * Intel Tangier - */ - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TNG_UART, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_tng}, - - /* * Intel Quark x1000 */ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART, diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 54e6c8ddef5d..52d82d2ac726 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -261,6 +261,14 @@ configured less than Maximum supported fifo bytes */ UART_FCR7_64BYTE, .flags = UART_CAP_FIFO, }, + [PORT_RT2880] = { + .name = "Palmchip BK-3103", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ @@ -276,7 +284,7 @@ static void default_serial_dl_write(struct uart_8250_port *up, int value) serial_out(up, UART_DLM, value >> 8 & 0xff); } -#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X) +#ifdef CONFIG_SERIAL_8250_RT288X /* Au1x00/RT288x UART hardware has a weird register layout */ static const s8 au_io_in_map[8] = { @@ -427,7 +435,7 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = mem32be_serial_out; break; -#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X) +#ifdef CONFIG_SERIAL_8250_RT288X case UPIO_AU: p->serial_in = au_serial_in; p->serial_out = au_serial_out; @@ -1238,6 +1246,9 @@ static void autoconfig_irq(struct uart_8250_port *up) inb_p(ICP); } + if (uart_console(port)) + console_lock(); + /* forget possible initially masked and pending IRQ */ probe_irq_off(probe_irq_on()); save_mcr = serial_in(up, UART_MCR); @@ -1269,6 +1280,9 @@ static void autoconfig_irq(struct uart_8250_port *up) if (port->flags & UPF_FOURPORT) outb_p(save_ICP, ICP); + if (uart_console(port)) + console_unlock(); + port->irq = (irq > 0) ? irq : 0; } @@ -1799,9 +1813,6 @@ int serial8250_do_startup(struct uart_port *port) unsigned char lsr, iir; int retval; - if (port->type == PORT_8250_CIR) - return -ENODEV; - if (!port->fifosize) port->fifosize = uart_config[port->type].fifo_size; if (!up->tx_loadsz) @@ -2222,6 +2233,23 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud, serial_port_out(port, 0x2, quot_frac); } +static unsigned int +serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int tolerance = port->uartclk / 100; + + /* + * Ask the core to calculate the divisor for us. + * Allow 1% tolerance at the upper limit so uart clks marginally + * slower than nominal still match standard baud rates without + * causing transmission errors. + */ + return uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 0xffff, + (port->uartclk + tolerance) / 16); +} + void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -2233,12 +2261,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, cval = serial8250_compute_lcr(up, termios->c_cflag); - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, - port->uartclk / 16 / 0xffff, - port->uartclk / 16); + baud = serial8250_get_baud_rate(port, termios, old); quot = serial8250_get_divisor(up, baud, &frac); /* @@ -2505,14 +2528,8 @@ static void serial8250_release_port(struct uart_port *port) static int serial8250_request_port(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); - int ret; - - if (port->type == PORT_8250_CIR) - return -ENODEV; - - ret = serial8250_request_std_resource(up); - return ret; + return serial8250_request_std_resource(up); } static int fcr_get_rxtrig_bytes(struct uart_8250_port *up) @@ -2660,9 +2677,6 @@ static void serial8250_config_port(struct uart_port *port, int flags) struct uart_8250_port *up = up_to_u8250p(port); int ret; - if (port->type == PORT_8250_CIR) - return; - /* * Find the region that we can probe for. This in turn * tells us whether we can probe for the type of port. @@ -2797,6 +2811,27 @@ static void serial8250_console_putchar(struct uart_port *port, int ch) } /* + * Restore serial console when h/w power-off detected + */ +static void serial8250_console_restore(struct uart_8250_port *up) +{ + struct uart_port *port = &up->port; + struct ktermios termios; + unsigned int baud, quot, frac = 0; + + termios.c_cflag = port->cons->cflag; + if (port->state->port.tty && termios.c_cflag == 0) + termios.c_cflag = port->state->port.tty->termios.c_cflag; + + baud = serial8250_get_baud_rate(port, &termios, NULL); + quot = serial8250_get_divisor(up, baud, &frac); + + serial8250_set_divisor(port, baud, quot, frac); + serial_port_out(port, UART_LCR, up->lcr); + serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS); +} + +/* * Print a string to the serial port trying not to disturb * any possible real use of the port... * @@ -2833,22 +2868,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s, /* check scratch reg to see if port powered off during system sleep */ if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) { - struct ktermios termios; - unsigned int baud, quot, frac = 0; - - termios.c_cflag = port->cons->cflag; - if (port->state->port.tty && termios.c_cflag == 0) - termios.c_cflag = port->state->port.tty->termios.c_cflag; - - baud = uart_get_baud_rate(port, &termios, NULL, - port->uartclk / 16 / 0xffff, - port->uartclk / 16); - quot = serial8250_get_divisor(up, baud, &frac); - - serial8250_set_divisor(port, baud, quot, frac); - serial_port_out(port, UART_LCR, up->lcr); - serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS); - + serial8250_console_restore(up); up->canary = 0; } @@ -2910,3 +2930,5 @@ int serial8250_console_setup(struct uart_port *port, char *options, bool probe) } #endif /* CONFIG_SERIAL_8250_CONSOLE */ + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index e1de1181b322..e6f5e12a2d83 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -274,8 +274,8 @@ config SERIAL_8250_ACORN config SERIAL_8250_FSL bool - depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550 - default PPC + depends on SERIAL_8250_CONSOLE + default PPC || ARM || ARM64 config SERIAL_8250_DW tristate "Support for Synopsys DesignWare 8250 quirks" @@ -294,11 +294,12 @@ config SERIAL_8250_EM config SERIAL_8250_RT288X bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support" - depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620) + depends on SERIAL_8250 + default y if MIPS_ALCHEMY || SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620 help - If you have a Ralink RT288x/RT305x SoC based board and want to use the - serial port, say Y to this option. The driver can handle up to 2 serial - ports. If unsure, say N. + Selecting this option will add support for the alternate register + layout used by Ralink RT288x/RT305x, Alchemy Au1xxx, and some others. + If unsure, say N. config SERIAL_8250_OMAP tristate "Support for OMAP internal UART (8250 based driver)" @@ -337,7 +338,7 @@ config SERIAL_8250_FINTEK through the PNP driver. If unsure, say N. config SERIAL_8250_LPC18XX - bool "NXP LPC18xx/43xx serial port support" + tristate "NXP LPC18xx/43xx serial port support" depends on SERIAL_8250 && OF && (ARCH_LPC18XX || COMPILE_TEST) default ARCH_LPC18XX help @@ -366,3 +367,13 @@ config SERIAL_8250_INGENIC help If you have a system using an Ingenic SoC and wish to make use of its UARTs, say Y to this option. If unsure, say N. + +config SERIAL_8250_MID + tristate "Support for serial ports on Intel MID platforms" + depends on SERIAL_8250 && PCI + select HSU_DMA if SERIAL_8250_DMA + select HSU_DMA_PCI if X86_INTEL_MID + help + Selecting this option will enable handling of the extra features + present on the UART found on Intel Medfield SOC and various other + Intel platforms. diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 39c6d2277570..e177f8681ada 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -27,5 +27,6 @@ obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o obj-$(CONFIG_SERIAL_8250_INGENIC) += 8250_ingenic.o +obj-$(CONFIG_SERIAL_8250_MID) += 8250_mid.o CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 687b1ea294b7..1aec4404062d 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -115,9 +115,9 @@ config SERIAL_SB1250_DUART_CONSOLE config SERIAL_ATMEL bool "AT91 / AT32 on-chip serial port support" - depends on ARCH_AT91 || AVR32 + depends on ARCH_AT91 || AVR32 || COMPILE_TEST select SERIAL_CORE - select SERIAL_MCTRL_GPIO + select SERIAL_MCTRL_GPIO if GPIOLIB help This enables the driver for the on-chip UARTs of the Atmel AT91 and AT32 processors. @@ -571,7 +571,7 @@ config BFIN_UART3_CTSRTS config SERIAL_IMX tristate "IMX serial port support" - depends on ARCH_MXC + depends on ARCH_MXC || COMPILE_TEST select SERIAL_CORE select RATIONAL help @@ -582,6 +582,7 @@ config SERIAL_IMX_CONSOLE bool "Console on IMX serial port" depends on SERIAL_IMX=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON if OF help If you have enabled the serial port on the Freescale IMX CPU you can make it the console by answering Y to this option. @@ -743,7 +744,7 @@ config SERIAL_SH_SCI_CONSOLE config SERIAL_SH_SCI_DMA bool "DMA support" - depends on SERIAL_SH_SCI && SH_DMAE + depends on SERIAL_SH_SCI && DMA_ENGINE config SERIAL_PNX8XXX bool "Enable PNX8XXX SoCs' UART Support" @@ -1408,7 +1409,7 @@ config SERIAL_PCH_UART_CONSOLE warnings and which allows logins in single user mode). config SERIAL_MXS_AUART - depends on ARCH_MXS + depends on ARCH_MXS || COMPILE_TEST tristate "MXS AUART support" select SERIAL_CORE select SERIAL_MCTRL_GPIO if GPIOLIB @@ -1538,6 +1539,7 @@ config SERIAL_FSL_LPUART tristate "Freescale lpuart serial port support" depends on HAS_DMA select SERIAL_CORE + select SERIAL_EARLYCON help Support for the on-chip lpuart on some Freescale SOCs. diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index fd87a6f574e3..61b607f2488e 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -508,29 +508,6 @@ static struct uart_driver altera_uart_driver = { .cons = ALTERA_UART_CONSOLE, }; -#ifdef CONFIG_OF -static int altera_uart_get_of_uartclk(struct platform_device *pdev, - struct uart_port *port) -{ - int len; - const __be32 *clk; - - clk = of_get_property(pdev->dev.of_node, "clock-frequency", &len); - if (!clk || len < sizeof(__be32)) - return -ENODEV; - - port->uartclk = be32_to_cpup(clk); - - return 0; -} -#else -static int altera_uart_get_of_uartclk(struct platform_device *pdev, - struct uart_port *port) -{ - return -ENODEV; -} -#endif /* CONFIG_OF */ - static int altera_uart_probe(struct platform_device *pdev) { struct altera_uart_platform_uart *platp = dev_get_platdata(&pdev->dev); @@ -570,7 +547,8 @@ static int altera_uart_probe(struct platform_device *pdev) if (platp) port->uartclk = platp->uartclk; else { - ret = altera_uart_get_of_uartclk(pdev, port); + ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &port->uartclk); if (ret) return ret; } diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index fd27e986b1dd..899a77187bde 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -191,8 +191,8 @@ struct uart_amba_port { */ static int pl011_fifo_to_tty(struct uart_amba_port *uap) { - u16 status, ch; - unsigned int flag, max_count = 256; + u16 status; + unsigned int ch, flag, max_count = 256; int fifotaken = 0; while (max_count--) { diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c index f3af317131ac..75eb083b3361 100644 --- a/drivers/tty/serial/apbuart.c +++ b/drivers/tty/serial/apbuart.c @@ -581,6 +581,7 @@ static const struct of_device_id apbuart_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, apbuart_match); static struct platform_driver grlib_apbuart_of_driver = { .probe = apbuart_probe, diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 5ca5cf3e9359..94294558943c 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -112,6 +112,12 @@ struct atmel_uart_char { #define ATMEL_SERIAL_RINGSIZE 1024 /* + * at91: 6 USARTs and one DBGU port (SAM9260) + * avr32: 4 + */ +#define ATMEL_MAX_UART 7 + +/* * We wrap our port structure around the generic uart_port. */ struct atmel_uart_port { @@ -921,7 +927,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port) sg_set_page(&atmel_port->sg_tx, virt_to_page(port->state->xmit.buf), UART_XMIT_SIZE, - (int)port->state->xmit.buf & ~PAGE_MASK); + (unsigned long)port->state->xmit.buf & ~PAGE_MASK); nent = dma_map_sg(port->dev, &atmel_port->sg_tx, 1, @@ -931,10 +937,10 @@ static int atmel_prepare_tx_dma(struct uart_port *port) dev_dbg(port->dev, "need to release resource of dma\n"); goto chan_err; } else { - dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__, + dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__, sg_dma_len(&atmel_port->sg_tx), port->state->xmit.buf, - sg_dma_address(&atmel_port->sg_tx)); + &sg_dma_address(&atmel_port->sg_tx)); } /* Configure the slave DMA */ @@ -1103,7 +1109,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port) sg_set_page(&atmel_port->sg_rx, virt_to_page(ring->buf), sizeof(struct atmel_uart_char) * ATMEL_SERIAL_RINGSIZE, - (int)ring->buf & ~PAGE_MASK); + (unsigned long)ring->buf & ~PAGE_MASK); nent = dma_map_sg(port->dev, &atmel_port->sg_rx, 1, @@ -1113,10 +1119,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port) dev_dbg(port->dev, "need to release resource of dma\n"); goto chan_err; } else { - dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__, + dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__, sg_dma_len(&atmel_port->sg_rx), ring->buf, - sg_dma_address(&atmel_port->sg_rx)); + &sg_dma_address(&atmel_port->sg_rx)); } /* Configure the slave DMA */ @@ -1676,15 +1682,15 @@ static void atmel_init_rs485(struct uart_port *port, struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); if (np) { + struct serial_rs485 *rs485conf = &port->rs485; u32 rs485_delay[2]; /* rs485 properties */ if (of_property_read_u32_array(np, "rs485-rts-delay", rs485_delay, 2) == 0) { - struct serial_rs485 *rs485conf = &port->rs485; - rs485conf->delay_rts_before_send = rs485_delay[0]; rs485conf->delay_rts_after_send = rs485_delay[1]; rs485conf->flags = 0; + } if (of_get_property(np, "rs485-rx-during-tx", NULL)) rs485conf->flags |= SER_RS485_RX_DURING_TX; @@ -1692,7 +1698,6 @@ static void atmel_init_rs485(struct uart_port *port, if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL)) rs485conf->flags |= SER_RS485_ENABLED; - } } else { port->rs485 = pdata->rs485; } @@ -2296,7 +2301,7 @@ static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser) ret = -EINVAL; if (port->uartclk / 16 != ser->baud_base) ret = -EINVAL; - if ((void *)port->mapbase != ser->iomem_base) + if (port->mapbase != (unsigned long)ser->iomem_base) ret = -EINVAL; if (port->iobase != ser->port) ret = -EINVAL; @@ -2686,7 +2691,7 @@ static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev) enum mctrl_gpio_idx i; struct gpio_desc *gpiod; - p->gpios = mctrl_gpio_init(dev, 0); + p->gpios = mctrl_gpio_init_noauto(dev, 0); if (IS_ERR(p->gpios)) return PTR_ERR(p->gpios); @@ -2786,7 +2791,7 @@ static int atmel_serial_probe(struct platform_device *pdev) ret = atmel_init_gpios(port, &pdev->dev); if (ret < 0) { dev_err(&pdev->dev, "Failed to initialize GPIOs."); - goto err; + goto err_clear_bit; } ret = atmel_init_port(port, pdev); diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index d5d2dd7c7917..b3a4e0cdddaa 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -500,7 +500,7 @@ static int uart_clps711x_probe(struct platform_device *pdev) platform_set_drvdata(pdev, s); - s->gpios = mctrl_gpio_init(&pdev->dev, 0); + s->gpios = mctrl_gpio_init_noauto(&pdev->dev, 0); if (IS_ERR(s->gpios)) return PTR_ERR(s->gpios); diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 08431adeacd5..d3e3d42c0c12 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1450,6 +1450,7 @@ static const struct of_device_id cpm_uart_match[] = { }, {} }; +MODULE_DEVICE_TABLE(of, cpm_uart_match); static struct platform_driver cpm_uart_driver = { .driver = { diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 3e4470af5c50..f13f2ebd215b 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3655,7 +3655,6 @@ rs_close(struct tty_struct *tty, struct file * filp) wake_up_interruptible(&info->port.open_wait); } info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->port.close_wait); local_irq_restore(flags); /* port closed */ @@ -3759,23 +3758,6 @@ block_til_ready(struct tty_struct *tty, struct file * filp, int do_clocal = 0; /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (info->port.flags & ASYNC_CLOSING) { - wait_event_interruptible_tty(tty, info->port.close_wait, - !(info->port.flags & ASYNC_CLOSING)); -#ifdef SERIAL_DO_RESTART - if (info->port.flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; -#else - return -EAGAIN; -#endif - } - - /* * If non-blocking mode is set, or the port is not enabled, * then make the check up front and then exit. */ @@ -3825,7 +3807,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp, #endif break; } - if (!(info->port.flags & ASYNC_CLOSING) && do_clocal) + if (do_clocal) /* && (do_clocal || DCD_IS_ASSERTED) */ break; if (signal_pending(current)) { @@ -3895,20 +3877,6 @@ rs_open(struct tty_struct *tty, struct file * filp) info->port.low_latency = !!(info->port.flags & ASYNC_LOW_LATENCY); /* - * If the port is in the middle of closing, bail out now - */ - if (info->port.flags & ASYNC_CLOSING) { - wait_event_interruptible_tty(tty, info->port.close_wait, - !(info->port.flags & ASYNC_CLOSING)); -#ifdef SERIAL_DO_RESTART - return ((info->port.flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); -#else - return -EAGAIN; -#endif - } - - /* * If DMA is enabled try to allocate the irq's. */ if (info->port.count == 1) { diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 08ce76f4f261..3d790033744e 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1746,6 +1746,45 @@ static struct console lpuart32_console = { .data = &lpuart_reg, }; +static void lpuart_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, lpuart_console_putchar); +} + +static void lpuart32_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, lpuart32_console_putchar); +} + +static int __init lpuart_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = lpuart_early_write; + return 0; +} + +static int __init lpuart32_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = lpuart32_early_write; + return 0; +} + +OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup); +OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup); +EARLYCON_DECLARE(lpuart, lpuart_early_console_setup); +EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup); + #define LPUART_CONSOLE (&lpuart_console) #define LPUART32_CONSOLE (&lpuart32_console) #else diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 536a33b99be9..88246f7e435a 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1362,7 +1362,7 @@ static struct spi_driver ifx_spi_driver = { .driver = { .name = DRVNAME, .pm = &ifx_spi_pm, - .owner = THIS_MODULE}, + }, .probe = ifx_spi_spi_probe, .shutdown = ifx_spi_spi_shutdown, .remove = ifx_spi_spi_remove, diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index fe3d41cc8416..016e4be05cec 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -139,6 +139,7 @@ #define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ #define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ #define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ +#define USR1_AGTIM (1<<8) /* Ageing timer interrupt flag */ #define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ #define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ #define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ @@ -728,11 +729,15 @@ static void imx_dma_rxint(struct imx_port *sport) if ((temp & USR2_RDR) && !sport->dma_is_rxing) { sport->dma_is_rxing = 1; - /* disable the `Recerver Ready Interrrupt` */ + /* disable the receiver ready and aging timer interrupts */ temp = readl(sport->port.membase + UCR1); temp &= ~(UCR1_RRDYEN); writel(temp, sport->port.membase + UCR1); + temp = readl(sport->port.membase + UCR2); + temp &= ~(UCR2_ATEN); + writel(temp, sport->port.membase + UCR2); + /* tell the DMA to receive the data. */ start_rx_dma(sport); } @@ -749,7 +754,7 @@ static irqreturn_t imx_int(int irq, void *dev_id) sts = readl(sport->port.membase + USR1); sts2 = readl(sport->port.membase + USR2); - if (sts & USR1_RRDY) { + if (sts & (USR1_RRDY | USR1_AGTIM)) { if (sport->dma_is_enabled) imx_dma_rxint(sport); else @@ -852,19 +857,6 @@ static void imx_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&sport->port.lock, flags); } -#define TXTL 2 /* reset default */ -#define RXTL 1 /* reset default */ - -static void imx_setup_ufcr(struct imx_port *sport, unsigned int mode) -{ - unsigned int val; - - /* set receiver / transmitter trigger level */ - val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE); - val |= TXTL << UFCR_TXTL_SHF | RXTL; - writel(val, sport->port.membase + UFCR); -} - #define RX_BUF_SIZE (PAGE_SIZE) static void imx_rx_dma_done(struct imx_port *sport) { @@ -873,11 +865,15 @@ static void imx_rx_dma_done(struct imx_port *sport) spin_lock_irqsave(&sport->port.lock, flags); - /* Enable this interrupt when the RXFIFO is empty. */ + /* re-enable interrupts to get notified when new symbols are incoming */ temp = readl(sport->port.membase + UCR1); temp |= UCR1_RRDYEN; writel(temp, sport->port.membase + UCR1); + temp = readl(sport->port.membase + UCR2); + temp |= UCR2_ATEN; + writel(temp, sport->port.membase + UCR2); + sport->dma_is_rxing = 0; /* Is the shutdown waiting for us? */ @@ -888,14 +884,12 @@ static void imx_rx_dma_done(struct imx_port *sport) } /* - * There are three kinds of RX DMA interrupts(such as in the MX6Q): + * There are two kinds of RX DMA interrupts(such as in the MX6Q): * [1] the RX DMA buffer is full. - * [2] the Aging timer expires(wait for 8 bytes long) - * [3] the Idle Condition Detect(enabled the UCR4_IDDMAEN). + * [2] the aging timer expires * - * The [2] is trigger when a character was been sitting in the FIFO - * meanwhile [3] can wait for 32 bytes long when the RX line is - * on IDLE state and RxFIFO is empty. + * Condition [2] is triggered when a character has been sitting in the FIFO + * for at least 8 byte durations. */ static void dma_rx_callback(void *data) { @@ -913,13 +907,6 @@ static void dma_rx_callback(void *data) status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state); count = RX_BUF_SIZE - state.residue; - if (readl(sport->port.membase + USR2) & USR2_IDLE) { - /* In condition [3] the SDMA counted up too early */ - count--; - - writel(USR2_IDLE, sport->port.membase + USR2); - } - dev_dbg(sport->port.dev, "We get %d bytes.\n", count); if (count) { @@ -931,23 +918,21 @@ static void dma_rx_callback(void *data) sport->port.icount.buf_overrun++; } tty_flip_buffer_push(port); + sport->port.icount.rx += count; + } + /* + * Restart RX DMA directly if more data is available in order to skip + * the roundtrip through the IRQ handler. If there is some data already + * in the FIFO, DMA needs to be restarted soon anyways. + * + * Otherwise stop the DMA and reactivate FIFO IRQs to restart DMA once + * data starts to arrive again. + */ + if (readl(sport->port.membase + USR2) & USR2_RDR) start_rx_dma(sport); - } else if (readl(sport->port.membase + USR2) & USR2_RDR) { - /* - * start rx_dma directly once data in RXFIFO, more efficient - * than before: - * 1. call imx_rx_dma_done to stop dma if no data received - * 2. wait next RDR interrupt to start dma transfer. - */ - start_rx_dma(sport); - } else { - /* - * stop dma to prevent too many IDLE event trigged if no data - * in RXFIFO - */ + else imx_rx_dma_done(sport); - } } static int start_rx_dma(struct imx_port *sport) @@ -980,6 +965,22 @@ static int start_rx_dma(struct imx_port *sport) return 0; } +#define TXTL_DEFAULT 2 /* reset default */ +#define RXTL_DEFAULT 1 /* reset default */ +#define TXTL_DMA 8 /* DMA burst setting */ +#define RXTL_DMA 9 /* DMA burst setting */ + +static void imx_setup_ufcr(struct imx_port *sport, + unsigned char txwl, unsigned char rxwl) +{ + unsigned int val; + + /* set receiver / transmitter trigger level */ + val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE); + val |= txwl << UFCR_TXTL_SHF | rxwl; + writel(val, sport->port.membase + UFCR); +} + static void imx_uart_dma_exit(struct imx_port *sport) { if (sport->dma_chan_rx) { @@ -1015,7 +1016,8 @@ static int imx_uart_dma_init(struct imx_port *sport) slave_config.direction = DMA_DEV_TO_MEM; slave_config.src_addr = sport->port.mapbase + URXD0; slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; - slave_config.src_maxburst = RXTL; + /* one byte less than the watermark level to enable the aging timer */ + slave_config.src_maxburst = RXTL_DMA - 1; ret = dmaengine_slave_config(sport->dma_chan_rx, &slave_config); if (ret) { dev_err(dev, "error in RX dma configuration.\n"); @@ -1039,7 +1041,7 @@ static int imx_uart_dma_init(struct imx_port *sport) slave_config.direction = DMA_MEM_TO_DEV; slave_config.dst_addr = sport->port.mapbase + URTX0; slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; - slave_config.dst_maxburst = TXTL; + slave_config.dst_maxburst = TXTL_DMA; ret = dmaengine_slave_config(sport->dma_chan_tx, &slave_config); if (ret) { dev_err(dev, "error in TX dma configuration."); @@ -1062,15 +1064,14 @@ static void imx_enable_dma(struct imx_port *sport) /* set UCR1 */ temp = readl(sport->port.membase + UCR1); - temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN | - /* wait for 32 idle frames for IDDMA interrupt */ - UCR1_ICD_REG(3); + temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN; writel(temp, sport->port.membase + UCR1); - /* set UCR4 */ - temp = readl(sport->port.membase + UCR4); - temp |= UCR4_IDDMAEN; - writel(temp, sport->port.membase + UCR4); + temp = readl(sport->port.membase + UCR2); + temp |= UCR2_ATEN; + writel(temp, sport->port.membase + UCR2); + + imx_setup_ufcr(sport, TXTL_DMA, RXTL_DMA); sport->dma_is_enabled = 1; } @@ -1086,13 +1087,10 @@ static void imx_disable_dma(struct imx_port *sport) /* clear UCR2 */ temp = readl(sport->port.membase + UCR2); - temp &= ~(UCR2_CTSC | UCR2_CTS); + temp &= ~(UCR2_CTSC | UCR2_CTS | UCR2_ATEN); writel(temp, sport->port.membase + UCR2); - /* clear UCR4 */ - temp = readl(sport->port.membase + UCR4); - temp &= ~UCR4_IDDMAEN; - writel(temp, sport->port.membase + UCR4); + imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); sport->dma_is_enabled = 0; } @@ -1115,7 +1113,7 @@ static int imx_startup(struct uart_port *port) return retval; } - imx_setup_ufcr(sport, 0); + imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); /* disable the DREN bit (Data Ready interrupt enable) before * requesting IRQs @@ -1128,6 +1126,11 @@ static int imx_startup(struct uart_port *port) writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); + /* Can we enable the DMA support? */ + if (is_imx6q_uart(sport) && !uart_console(port) && + !sport->dma_is_inited) + imx_uart_dma_init(sport); + spin_lock_irqsave(&sport->port.lock, flags); /* Reset fifo's and state machines */ i = 100; @@ -1145,6 +1148,9 @@ static int imx_startup(struct uart_port *port) writel(USR1_RTSD, sport->port.membase + USR1); writel(USR2_ORE, sport->port.membase + USR2); + if (sport->dma_is_inited && !sport->dma_is_enabled) + imx_enable_dma(sport); + temp = readl(sport->port.membase + UCR1); temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN; @@ -1278,7 +1284,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, { struct imx_port *sport = (struct imx_port *)port; unsigned long flags; - unsigned int ucr2, old_ucr1, old_txrxen, baud, quot; + unsigned int ucr2, old_ucr1, old_ucr2, baud, quot; unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; unsigned int div, ufcr; unsigned long num, denom; @@ -1315,11 +1321,6 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, } else { ucr2 |= UCR2_CTSC; } - - /* Can we enable the DMA support? */ - if (is_imx6q_uart(sport) && !uart_console(port) - && !sport->dma_is_inited) - imx_uart_dma_init(sport); } else { termios->c_cflag &= ~CRTSCTS; } @@ -1387,10 +1388,10 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, barrier(); /* then, disable everything */ - old_txrxen = readl(sport->port.membase + UCR2); - writel(old_txrxen & ~(UCR2_TXEN | UCR2_RXEN), + old_ucr2 = readl(sport->port.membase + UCR2); + writel(old_ucr2 & ~(UCR2_TXEN | UCR2_RXEN), sport->port.membase + UCR2); - old_txrxen &= (UCR2_TXEN | UCR2_RXEN); + old_ucr2 &= (UCR2_TXEN | UCR2_RXEN | UCR2_ATEN); /* custom-baudrate handling */ div = sport->port.uartclk / (baud * 16); @@ -1431,13 +1432,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, writel(old_ucr1, sport->port.membase + UCR1); /* set the parity, stop bits and data size */ - writel(ucr2 | old_txrxen, sport->port.membase + UCR2); + writel(ucr2 | old_ucr2, sport->port.membase + UCR2); if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) imx_enable_ms(&sport->port); - if (sport->dma_is_inited && !sport->dma_is_enabled) - imx_enable_dma(sport); spin_unlock_irqrestore(&sport->port.lock, flags); } @@ -1503,7 +1502,7 @@ static int imx_poll_init(struct uart_port *port) if (retval) clk_disable_unprepare(sport->clk_ipg); - imx_setup_ufcr(sport, 0); + imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); spin_lock_irqsave(&sport->port.lock, flags); @@ -1631,12 +1630,12 @@ imx_console_write(struct console *co, const char *s, unsigned int count) int locked = 1; int retval; - retval = clk_prepare_enable(sport->clk_per); + retval = clk_enable(sport->clk_per); if (retval) return; - retval = clk_prepare_enable(sport->clk_ipg); + retval = clk_enable(sport->clk_ipg); if (retval) { - clk_disable_unprepare(sport->clk_per); + clk_disable(sport->clk_per); return; } @@ -1675,8 +1674,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count) if (locked) spin_unlock_irqrestore(&sport->port.lock, flags); - clk_disable_unprepare(sport->clk_ipg); - clk_disable_unprepare(sport->clk_per); + clk_disable(sport->clk_ipg); + clk_disable(sport->clk_per); } /* @@ -1773,11 +1772,19 @@ imx_console_setup(struct console *co, char *options) else imx_console_get_options(sport, &baud, &parity, &bits); - imx_setup_ufcr(sport, 0); + imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); retval = uart_set_options(&sport->port, co, baud, parity, bits, flow); - clk_disable_unprepare(sport->clk_ipg); + clk_disable(sport->clk_ipg); + if (retval) { + clk_unprepare(sport->clk_ipg); + goto error_console; + } + + retval = clk_prepare(sport->clk_per); + if (retval) + clk_disable_unprepare(sport->clk_ipg); error_console: return retval; @@ -1795,6 +1802,38 @@ static struct console imx_console = { }; #define IMX_CONSOLE &imx_console + +#ifdef CONFIG_OF +static void imx_console_early_putchar(struct uart_port *port, int ch) +{ + while (readl_relaxed(port->membase + IMX21_UTS) & UTS_TXFULL) + cpu_relax(); + + writel_relaxed(ch, port->membase + URTX0); +} + +static void imx_console_early_write(struct console *con, const char *s, + unsigned count) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, count, imx_console_early_putchar); +} + +static int __init +imx_console_early_setup(struct earlycon_device *dev, const char *opt) +{ + if (!dev->port.membase) + return -ENODEV; + + dev->con->write = imx_console_early_write; + + return 0; +} +OF_EARLYCON_DECLARE(ec_imx6q, "fsl,imx6q-uart", imx_console_early_setup); +OF_EARLYCON_DECLARE(ec_imx21, "fsl,imx21-uart", imx_console_early_setup); +#endif + #else #define IMX_CONSOLE NULL #endif diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index e92d7ebe9e77..7eb04ae71cc8 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -691,12 +691,13 @@ static int serial_hs_lpc32xx_probe(struct platform_device *pdev) p->port.mapbase = res->start; p->port.membase = NULL; - p->port.irq = platform_get_irq(pdev, 0); - if (p->port.irq < 0) { + ret = platform_get_irq(pdev, 0); + if (ret < 0) { dev_err(&pdev->dev, "Error getting irq for HS UART port %d\n", uarts_registered); - return p->port.irq; + return ret; } + p->port.irq = ret; p->port.iotype = UPIO_MEM32; p->port.uartclk = LPC32XX_MAIN_OSC_FREQ; diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index 077377259a2c..5c4c280b3207 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -904,7 +904,6 @@ static SIMPLE_DEV_PM_OPS(max3100_pm_ops, max3100_suspend, max3100_resume); static struct spi_driver max3100_driver = { .driver = { .name = "max3100", - .owner = THIS_MODULE, .pm = MAX3100_PM_OPS, }, .probe = max3100_probe, diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 182549f55904..d45133056f51 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1338,7 +1338,6 @@ MODULE_DEVICE_TABLE(spi, max310x_id_table); static struct spi_driver max310x_uart_driver = { .driver = { .name = MAX310X_NAME, - .owner = THIS_MODULE, .of_match_table = of_match_ptr(max310x_dt_ids), .pm = &max310x_pm_ops, }, diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c index b90e7b30468b..3141aa20843d 100644 --- a/drivers/tty/serial/men_z135_uart.c +++ b/drivers/tty/serial/men_z135_uart.c @@ -35,8 +35,6 @@ #define MEN_Z135_BAUD_REG 0x810 #define MEN_Z135_TIMEOUT 0x814 -#define MEN_Z135_MEM_SIZE 0x818 - #define IRQ_ID(x) ((x) & 0x1f) #define MEN_Z135_IER_RXCIEN BIT(0) /* RX Space IRQ */ @@ -124,6 +122,7 @@ MODULE_PARM_DESC(rx_timeout, "RX timeout. " struct men_z135_port { struct uart_port port; struct mcb_device *mdev; + struct resource *mem; unsigned char *rxbuf; u32 stat_reg; spinlock_t lock; @@ -734,22 +733,30 @@ static const char *men_z135_type(struct uart_port *port) static void men_z135_release_port(struct uart_port *port) { + struct men_z135_port *uart = to_men_z135(port); + iounmap(port->membase); port->membase = NULL; - release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE); + mcb_release_mem(uart->mem); } static int men_z135_request_port(struct uart_port *port) { - int size = MEN_Z135_MEM_SIZE; + struct men_z135_port *uart = to_men_z135(port); + struct mcb_device *mdev = uart->mdev; + struct resource *mem; + + mem = mcb_request_mem(uart->mdev, dev_name(&mdev->dev)); + if (IS_ERR(mem)) + return PTR_ERR(mem); - if (!request_mem_region(port->mapbase, size, "men_z135_port")) - return -EBUSY; + port->mapbase = mem->start; + uart->mem = mem; - port->membase = ioremap(port->mapbase, MEN_Z135_MEM_SIZE); + port->membase = ioremap(mem->start, resource_size(mem)); if (port->membase == NULL) { - release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE); + mcb_release_mem(mem); return -ENOMEM; } diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 41de374d9784..8c3e51314470 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -1135,6 +1135,13 @@ mpc52xx_uart_startup(struct uart_port *port) psc_ops->command(port, MPC52xx_PSC_RST_RX); psc_ops->command(port, MPC52xx_PSC_RST_TX); + /* + * According to Freescale's support the RST_TX command can produce a + * spike on the TX pin. So they recommend to delay "for one character". + * One millisecond should be enough for everyone. + */ + msleep(1); + psc_ops->set_sicr(port, 0); /* UART mode DCD ignored */ psc_ops->fifo_init(port); diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c index 82bb6d1fe23b..cadfd1cfae2b 100644 --- a/drivers/tty/serial/mpsc.c +++ b/drivers/tty/serial/mpsc.c @@ -55,8 +55,6 @@ #define SUPPORT_SYSRQ #endif -#include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/ioport.h> @@ -755,7 +753,7 @@ static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi) pi->port.line); if (!pi->dma_region) { - if (!dma_supported(pi->port.dev, 0xffffffff)) { + if (!dma_set_mask(pi->port.dev, 0xffffffff)) { printk(KERN_ERR "MPSC: Inadequate DMA support\n"); rc = -ENXIO; } else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev, @@ -2108,26 +2106,11 @@ static int mpsc_drv_probe(struct platform_device *dev) return rc; } -static int mpsc_drv_remove(struct platform_device *dev) -{ - pr_debug("mpsc_drv_exit: Removing MPSC %d\n", dev->id); - - if (dev->id < MPSC_NUM_CTLRS) { - uart_remove_one_port(&mpsc_reg, &mpsc_ports[dev->id].port); - mpsc_release_port((struct uart_port *) - &mpsc_ports[dev->id].port); - mpsc_drv_unmap_regs(&mpsc_ports[dev->id]); - return 0; - } else { - return -ENODEV; - } -} - static struct platform_driver mpsc_driver = { .probe = mpsc_drv_probe, - .remove = mpsc_drv_remove, .driver = { - .name = MPSC_CTLR_NAME, + .name = MPSC_CTLR_NAME, + .suppress_bind_attrs = true, }, }; @@ -2156,22 +2139,10 @@ static int __init mpsc_drv_init(void) return rc; } +device_initcall(mpsc_drv_init); -static void __exit mpsc_drv_exit(void) -{ - platform_driver_unregister(&mpsc_driver); - platform_driver_unregister(&mpsc_shared_driver); - uart_unregister_driver(&mpsc_reg); - memset(mpsc_ports, 0, sizeof(mpsc_ports)); - memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); -} - -module_init(mpsc_drv_init); -module_exit(mpsc_drv_exit); - +/* MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>"); MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver"); -MODULE_VERSION(MPSC_VERSION); MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR); -MODULE_ALIAS("platform:" MPSC_CTLR_NAME); +*/ diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index b73889c8ed4b..dcde955475dc 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -20,6 +20,8 @@ #endif #include <linux/atomic.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/hrtimer.h> #include <linux/module.h> #include <linux/io.h> @@ -31,6 +33,7 @@ #include <linux/tty_flip.h> #include <linux/serial_core.h> #include <linux/serial.h> +#include <linux/slab.h> #include <linux/clk.h> #include <linux/platform_device.h> #include <linux/delay.h> @@ -39,6 +42,11 @@ #include "msm_serial.h" +#define UARTDM_BURST_SIZE 16 /* in bytes */ +#define UARTDM_TX_AIGN(x) ((x) & ~0x3) /* valid for > 1p3 */ +#define UARTDM_TX_MAX 256 /* in bytes, valid for <= 1p3 */ +#define UARTDM_RX_SIZE (UART_XMIT_SIZE / 4) + enum { UARTDM_1P1 = 1, UARTDM_1P2, @@ -46,6 +54,17 @@ enum { UARTDM_1P4, }; +struct msm_dma { + struct dma_chan *chan; + enum dma_data_direction dir; + dma_addr_t phys; + unsigned char *virt; + dma_cookie_t cookie; + u32 enable_bit; + unsigned int count; + struct dma_async_tx_descriptor *desc; +}; + struct msm_port { struct uart_port uart; char name[16]; @@ -55,9 +74,153 @@ struct msm_port { int is_uartdm; unsigned int old_snap_state; bool break_detected; + struct msm_dma tx_dma; + struct msm_dma rx_dma; }; -static inline void wait_for_xmitr(struct uart_port *port) +static void msm_handle_tx(struct uart_port *port); +static void msm_start_rx_dma(struct msm_port *msm_port); + +void msm_stop_dma(struct uart_port *port, struct msm_dma *dma) +{ + struct device *dev = port->dev; + unsigned int mapped; + u32 val; + + mapped = dma->count; + dma->count = 0; + + dmaengine_terminate_all(dma->chan); + + /* + * DMA Stall happens if enqueue and flush command happens concurrently. + * For example before changing the baud rate/protocol configuration and + * sending flush command to ADM, disable the channel of UARTDM. + * Note: should not reset the receiver here immediately as it is not + * suggested to do disable/reset or reset/disable at the same time. + */ + val = msm_read(port, UARTDM_DMEN); + val &= ~dma->enable_bit; + msm_write(port, val, UARTDM_DMEN); + + if (mapped) + dma_unmap_single(dev, dma->phys, mapped, dma->dir); +} + +static void msm_release_dma(struct msm_port *msm_port) +{ + struct msm_dma *dma; + + dma = &msm_port->tx_dma; + if (dma->chan) { + msm_stop_dma(&msm_port->uart, dma); + dma_release_channel(dma->chan); + } + + memset(dma, 0, sizeof(*dma)); + + dma = &msm_port->rx_dma; + if (dma->chan) { + msm_stop_dma(&msm_port->uart, dma); + dma_release_channel(dma->chan); + kfree(dma->virt); + } + + memset(dma, 0, sizeof(*dma)); +} + +static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base) +{ + struct device *dev = msm_port->uart.dev; + struct dma_slave_config conf; + struct msm_dma *dma; + u32 crci = 0; + int ret; + + dma = &msm_port->tx_dma; + + /* allocate DMA resources, if available */ + dma->chan = dma_request_slave_channel_reason(dev, "tx"); + if (IS_ERR(dma->chan)) + goto no_tx; + + of_property_read_u32(dev->of_node, "qcom,tx-crci", &crci); + + memset(&conf, 0, sizeof(conf)); + conf.direction = DMA_MEM_TO_DEV; + conf.device_fc = true; + conf.dst_addr = base + UARTDM_TF; + conf.dst_maxburst = UARTDM_BURST_SIZE; + conf.slave_id = crci; + + ret = dmaengine_slave_config(dma->chan, &conf); + if (ret) + goto rel_tx; + + dma->dir = DMA_TO_DEVICE; + + if (msm_port->is_uartdm < UARTDM_1P4) + dma->enable_bit = UARTDM_DMEN_TX_DM_ENABLE; + else + dma->enable_bit = UARTDM_DMEN_TX_BAM_ENABLE; + + return; + +rel_tx: + dma_release_channel(dma->chan); +no_tx: + memset(dma, 0, sizeof(*dma)); +} + +static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base) +{ + struct device *dev = msm_port->uart.dev; + struct dma_slave_config conf; + struct msm_dma *dma; + u32 crci = 0; + int ret; + + dma = &msm_port->rx_dma; + + /* allocate DMA resources, if available */ + dma->chan = dma_request_slave_channel_reason(dev, "rx"); + if (IS_ERR(dma->chan)) + goto no_rx; + + of_property_read_u32(dev->of_node, "qcom,rx-crci", &crci); + + dma->virt = kzalloc(UARTDM_RX_SIZE, GFP_KERNEL); + if (!dma->virt) + goto rel_rx; + + memset(&conf, 0, sizeof(conf)); + conf.direction = DMA_DEV_TO_MEM; + conf.device_fc = true; + conf.src_addr = base + UARTDM_RF; + conf.src_maxburst = UARTDM_BURST_SIZE; + conf.slave_id = crci; + + ret = dmaengine_slave_config(dma->chan, &conf); + if (ret) + goto err; + + dma->dir = DMA_FROM_DEVICE; + + if (msm_port->is_uartdm < UARTDM_1P4) + dma->enable_bit = UARTDM_DMEN_RX_DM_ENABLE; + else + dma->enable_bit = UARTDM_DMEN_RX_BAM_ENABLE; + + return; +err: + kfree(dma->virt); +rel_rx: + dma_release_channel(dma->chan); +no_rx: + memset(dma, 0, sizeof(*dma)); +} + +static inline void msm_wait_for_xmitr(struct uart_port *port) { while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) { if (msm_read(port, UART_ISR) & UART_ISR_TX_READY) @@ -78,17 +241,277 @@ static void msm_stop_tx(struct uart_port *port) static void msm_start_tx(struct uart_port *port) { struct msm_port *msm_port = UART_TO_MSM(port); + struct msm_dma *dma = &msm_port->tx_dma; + + /* Already started in DMA mode */ + if (dma->count) + return; + + msm_port->imr |= UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_reset_dm_count(struct uart_port *port, int count) +{ + msm_wait_for_xmitr(port); + msm_write(port, count, UARTDM_NCF_TX); + msm_read(port, UARTDM_NCF_TX); +} + +static void msm_complete_tx_dma(void *args) +{ + struct msm_port *msm_port = args; + struct uart_port *port = &msm_port->uart; + struct circ_buf *xmit = &port->state->xmit; + struct msm_dma *dma = &msm_port->tx_dma; + struct dma_tx_state state; + enum dma_status status; + unsigned long flags; + unsigned int count; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + + /* Already stopped */ + if (!dma->count) + goto done; + + status = dmaengine_tx_status(dma->chan, dma->cookie, &state); + + dma_unmap_single(port->dev, dma->phys, dma->count, dma->dir); + val = msm_read(port, UARTDM_DMEN); + val &= ~dma->enable_bit; + msm_write(port, val, UARTDM_DMEN); + + if (msm_port->is_uartdm > UARTDM_1P3) { + msm_write(port, UART_CR_CMD_RESET_TX, UART_CR); + msm_write(port, UART_CR_TX_ENABLE, UART_CR); + } + + count = dma->count - state.residue; + port->icount.tx += count; + dma->count = 0; + + xmit->tail += count; + xmit->tail &= UART_XMIT_SIZE - 1; + + /* Restore "Tx FIFO below watermark" interrupt */ msm_port->imr |= UART_IMR_TXLEV; msm_write(port, msm_port->imr, UART_IMR); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + msm_handle_tx(port); +done: + spin_unlock_irqrestore(&port->lock, flags); +} + +static int msm_handle_tx_dma(struct msm_port *msm_port, unsigned int count) +{ + struct circ_buf *xmit = &msm_port->uart.state->xmit; + struct uart_port *port = &msm_port->uart; + struct msm_dma *dma = &msm_port->tx_dma; + void *cpu_addr; + int ret; + u32 val; + + cpu_addr = &xmit->buf[xmit->tail]; + + dma->phys = dma_map_single(port->dev, cpu_addr, count, dma->dir); + ret = dma_mapping_error(port->dev, dma->phys); + if (ret) + return ret; + + dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys, + count, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | + DMA_PREP_FENCE); + if (!dma->desc) { + ret = -EIO; + goto unmap; + } + + dma->desc->callback = msm_complete_tx_dma; + dma->desc->callback_param = msm_port; + + dma->cookie = dmaengine_submit(dma->desc); + ret = dma_submit_error(dma->cookie); + if (ret) + goto unmap; + + /* + * Using DMA complete for Tx FIFO reload, no need for + * "Tx FIFO below watermark" one, disable it + */ + msm_port->imr &= ~UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); + + dma->count = count; + + val = msm_read(port, UARTDM_DMEN); + val |= dma->enable_bit; + + if (msm_port->is_uartdm < UARTDM_1P4) + msm_write(port, val, UARTDM_DMEN); + + msm_reset_dm_count(port, count); + + if (msm_port->is_uartdm > UARTDM_1P3) + msm_write(port, val, UARTDM_DMEN); + + dma_async_issue_pending(dma->chan); + return 0; +unmap: + dma_unmap_single(port->dev, dma->phys, count, dma->dir); + return ret; +} + +static void msm_complete_rx_dma(void *args) +{ + struct msm_port *msm_port = args; + struct uart_port *port = &msm_port->uart; + struct tty_port *tport = &port->state->port; + struct msm_dma *dma = &msm_port->rx_dma; + int count = 0, i, sysrq; + unsigned long flags; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + + /* Already stopped */ + if (!dma->count) + goto done; + + val = msm_read(port, UARTDM_DMEN); + val &= ~dma->enable_bit; + msm_write(port, val, UARTDM_DMEN); + + /* Restore interrupts */ + msm_port->imr |= UART_IMR_RXLEV | UART_IMR_RXSTALE; + msm_write(port, msm_port->imr, UART_IMR); + + if (msm_read(port, UART_SR) & UART_SR_OVERRUN) { + port->icount.overrun++; + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + } + + count = msm_read(port, UARTDM_RX_TOTAL_SNAP); + + port->icount.rx += count; + + dma->count = 0; + + dma_unmap_single(port->dev, dma->phys, UARTDM_RX_SIZE, dma->dir); + + for (i = 0; i < count; i++) { + char flag = TTY_NORMAL; + + if (msm_port->break_detected && dma->virt[i] == 0) { + port->icount.brk++; + flag = TTY_BREAK; + msm_port->break_detected = false; + if (uart_handle_break(port)) + continue; + } + + if (!(port->read_status_mask & UART_SR_RX_BREAK)) + flag = TTY_NORMAL; + + spin_unlock_irqrestore(&port->lock, flags); + sysrq = uart_handle_sysrq_char(port, dma->virt[i]); + spin_lock_irqsave(&port->lock, flags); + if (!sysrq) + tty_insert_flip_char(tport, dma->virt[i], flag); + } + + msm_start_rx_dma(msm_port); +done: + spin_unlock_irqrestore(&port->lock, flags); + + if (count) + tty_flip_buffer_push(tport); +} + +static void msm_start_rx_dma(struct msm_port *msm_port) +{ + struct msm_dma *dma = &msm_port->rx_dma; + struct uart_port *uart = &msm_port->uart; + u32 val; + int ret; + + if (!dma->chan) + return; + + dma->phys = dma_map_single(uart->dev, dma->virt, + UARTDM_RX_SIZE, dma->dir); + ret = dma_mapping_error(uart->dev, dma->phys); + if (ret) + return; + + dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys, + UARTDM_RX_SIZE, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT); + if (!dma->desc) + goto unmap; + + dma->desc->callback = msm_complete_rx_dma; + dma->desc->callback_param = msm_port; + + dma->cookie = dmaengine_submit(dma->desc); + ret = dma_submit_error(dma->cookie); + if (ret) + goto unmap; + /* + * Using DMA for FIFO off-load, no need for "Rx FIFO over + * watermark" or "stale" interrupts, disable them + */ + msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE); + + /* + * Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3), + * we need RXSTALE to flush input DMA fifo to memory + */ + if (msm_port->is_uartdm < UARTDM_1P4) + msm_port->imr |= UART_IMR_RXSTALE; + + msm_write(uart, msm_port->imr, UART_IMR); + + dma->count = UARTDM_RX_SIZE; + + dma_async_issue_pending(dma->chan); + + msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR); + msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR); + + val = msm_read(uart, UARTDM_DMEN); + val |= dma->enable_bit; + + if (msm_port->is_uartdm < UARTDM_1P4) + msm_write(uart, val, UARTDM_DMEN); + + msm_write(uart, UARTDM_RX_SIZE, UARTDM_DMRX); + + if (msm_port->is_uartdm > UARTDM_1P3) + msm_write(uart, val, UARTDM_DMEN); + + return; +unmap: + dma_unmap_single(uart->dev, dma->phys, UARTDM_RX_SIZE, dma->dir); } static void msm_stop_rx(struct uart_port *port) { struct msm_port *msm_port = UART_TO_MSM(port); + struct msm_dma *dma = &msm_port->rx_dma; msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE); msm_write(port, msm_port->imr, UART_IMR); + + if (dma->chan) + msm_stop_dma(port, dma); } static void msm_enable_ms(struct uart_port *port) @@ -99,7 +522,7 @@ static void msm_enable_ms(struct uart_port *port) msm_write(port, msm_port->imr, UART_IMR); } -static void handle_rx_dm(struct uart_port *port, unsigned int misr) +static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr) { struct tty_port *tport = &port->state->port; unsigned int sr; @@ -169,9 +592,12 @@ static void handle_rx_dm(struct uart_port *port, unsigned int misr) msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); msm_write(port, 0xFFFFFF, UARTDM_DMRX); msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR); + + /* Try to use DMA */ + msm_start_rx_dma(msm_port); } -static void handle_rx(struct uart_port *port) +static void msm_handle_rx(struct uart_port *port) { struct tty_port *tport = &port->state->port; unsigned int sr; @@ -224,18 +650,11 @@ static void handle_rx(struct uart_port *port) spin_lock(&port->lock); } -static void reset_dm_count(struct uart_port *port, int count) -{ - wait_for_xmitr(port); - msm_write(port, count, UARTDM_NCF_TX); - msm_read(port, UARTDM_NCF_TX); -} - -static void handle_tx(struct uart_port *port) +static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count) { struct circ_buf *xmit = &port->state->xmit; struct msm_port *msm_port = UART_TO_MSM(port); - unsigned int tx_count, num_chars; + unsigned int num_chars; unsigned int tf_pointer = 0; void __iomem *tf; @@ -244,20 +663,8 @@ static void handle_tx(struct uart_port *port) else tf = port->membase + UART_TF; - tx_count = uart_circ_chars_pending(xmit); - tx_count = min3(tx_count, (unsigned int)UART_XMIT_SIZE - xmit->tail, - port->fifosize); - - if (port->x_char) { - if (msm_port->is_uartdm) - reset_dm_count(port, tx_count + 1); - - iowrite8_rep(tf, &port->x_char, 1); - port->icount.tx++; - port->x_char = 0; - } else if (tx_count && msm_port->is_uartdm) { - reset_dm_count(port, tx_count); - } + if (tx_count && msm_port->is_uartdm) + msm_reset_dm_count(port, tx_count); while (tf_pointer < tx_count) { int i; @@ -290,20 +697,76 @@ static void handle_tx(struct uart_port *port) uart_write_wakeup(port); } -static void handle_delta_cts(struct uart_port *port) +static void msm_handle_tx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + struct circ_buf *xmit = &msm_port->uart.state->xmit; + struct msm_dma *dma = &msm_port->tx_dma; + unsigned int pio_count, dma_count, dma_min; + void __iomem *tf; + int err = 0; + + if (port->x_char) { + if (msm_port->is_uartdm) + tf = port->membase + UARTDM_TF; + else + tf = port->membase + UART_TF; + + if (msm_port->is_uartdm) + msm_reset_dm_count(port, 1); + + iowrite8_rep(tf, &port->x_char, 1); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + msm_stop_tx(port); + return; + } + + pio_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); + dma_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + + dma_min = 1; /* Always DMA */ + if (msm_port->is_uartdm > UARTDM_1P3) { + dma_count = UARTDM_TX_AIGN(dma_count); + dma_min = UARTDM_BURST_SIZE; + } else { + if (dma_count > UARTDM_TX_MAX) + dma_count = UARTDM_TX_MAX; + } + + if (pio_count > port->fifosize) + pio_count = port->fifosize; + + if (!dma->chan || dma_count < dma_min) + msm_handle_tx_pio(port, pio_count); + else + err = msm_handle_tx_dma(msm_port, dma_count); + + if (err) /* fall back to PIO mode */ + msm_handle_tx_pio(port, pio_count); +} + +static void msm_handle_delta_cts(struct uart_port *port) { msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); port->icount.cts++; wake_up_interruptible(&port->state->port.delta_msr_wait); } -static irqreturn_t msm_irq(int irq, void *dev_id) +static irqreturn_t msm_uart_irq(int irq, void *dev_id) { struct uart_port *port = dev_id; struct msm_port *msm_port = UART_TO_MSM(port); + struct msm_dma *dma = &msm_port->rx_dma; + unsigned long flags; unsigned int misr; + u32 val; - spin_lock(&port->lock); + spin_lock_irqsave(&port->lock, flags); misr = msm_read(port, UART_MISR); msm_write(port, 0, UART_IMR); /* disable interrupt */ @@ -313,18 +776,29 @@ static irqreturn_t msm_irq(int irq, void *dev_id) } if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) { - if (msm_port->is_uartdm) - handle_rx_dm(port, misr); - else - handle_rx(port); + if (dma->count) { + val = UART_CR_CMD_STALE_EVENT_DISABLE; + msm_write(port, val, UART_CR); + val = UART_CR_CMD_RESET_STALE_INT; + msm_write(port, val, UART_CR); + /* + * Flush DMA input fifo to memory, this will also + * trigger DMA RX completion + */ + dmaengine_terminate_all(dma->chan); + } else if (msm_port->is_uartdm) { + msm_handle_rx_dm(port, misr); + } else { + msm_handle_rx(port); + } } if (misr & UART_IMR_TXLEV) - handle_tx(port); + msm_handle_tx(port); if (misr & UART_IMR_DELTA_CTS) - handle_delta_cts(port); + msm_handle_delta_cts(port); msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */ - spin_unlock(&port->lock); + spin_unlock_irqrestore(&port->lock, flags); return IRQ_HANDLED; } @@ -408,6 +882,7 @@ msm_find_best_baud(struct uart_port *port, unsigned int baud) { 3, 0xdd, 8 }, { 2, 0xee, 16 }, { 1, 0xff, 31 }, + { 0, 0xff, 31 }, }; divisor = uart_get_divisor(port, baud); @@ -419,21 +894,41 @@ msm_find_best_baud(struct uart_port *port, unsigned int baud) return entry; /* Default to smallest divider */ } -static int msm_set_baud_rate(struct uart_port *port, unsigned int baud) +static int msm_set_baud_rate(struct uart_port *port, unsigned int baud, + unsigned long *saved_flags) { - unsigned int rxstale, watermark; + unsigned int rxstale, watermark, mask; struct msm_port *msm_port = UART_TO_MSM(port); const struct msm_baud_map *entry; + unsigned long flags; entry = msm_find_best_baud(port, baud); msm_write(port, entry->code, UART_CSR); + if (baud > 460800) + port->uartclk = baud * 16; + + flags = *saved_flags; + spin_unlock_irqrestore(&port->lock, flags); + + clk_set_rate(msm_port->clk, port->uartclk); + + spin_lock_irqsave(&port->lock, flags); + *saved_flags = flags; + /* RX stale watermark */ rxstale = entry->rxstale; watermark = UART_IPR_STALE_LSB & rxstale; - watermark |= UART_IPR_RXSTALE_LAST; - watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2); + if (msm_port->is_uartdm) { + mask = UART_DM_IPR_STALE_TIMEOUT_MSB; + } else { + watermark |= UART_IPR_RXSTALE_LAST; + mask = UART_IPR_STALE_TIMEOUT_MSB; + } + + watermark |= mask & (rxstale << 2); + msm_write(port, watermark, UART_IPR); /* set RX watermark */ @@ -476,13 +971,13 @@ static void msm_init_clock(struct uart_port *port) static int msm_startup(struct uart_port *port) { struct msm_port *msm_port = UART_TO_MSM(port); - unsigned int data, rfr_level; + unsigned int data, rfr_level, mask; int ret; snprintf(msm_port->name, sizeof(msm_port->name), "msm_serial%d", port->line); - ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH, + ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH, msm_port->name, port); if (unlikely(ret)) return ret; @@ -496,11 +991,23 @@ static int msm_startup(struct uart_port *port) /* set automatic RFR level */ data = msm_read(port, UART_MR1); - data &= ~UART_MR1_AUTO_RFR_LEVEL1; + + if (msm_port->is_uartdm) + mask = UART_DM_MR1_AUTO_RFR_LEVEL1; + else + mask = UART_MR1_AUTO_RFR_LEVEL1; + + data &= ~mask; data &= ~UART_MR1_AUTO_RFR_LEVEL0; - data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2); + data |= mask & (rfr_level << 2); data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level; msm_write(port, data, UART_MR1); + + if (msm_port->is_uartdm) { + msm_request_tx_dma(msm_port, msm_port->uart.mapbase); + msm_request_rx_dma(msm_port, msm_port->uart.mapbase); + } + return 0; } @@ -511,6 +1018,9 @@ static void msm_shutdown(struct uart_port *port) msm_port->imr = 0; msm_write(port, 0, UART_IMR); /* disable interrupts */ + if (msm_port->is_uartdm) + msm_release_dma(msm_port); + clk_disable_unprepare(msm_port->clk); free_irq(port->irq, port); @@ -519,14 +1029,19 @@ static void msm_shutdown(struct uart_port *port) static void msm_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { + struct msm_port *msm_port = UART_TO_MSM(port); + struct msm_dma *dma = &msm_port->rx_dma; unsigned long flags; unsigned int baud, mr; spin_lock_irqsave(&port->lock, flags); + if (dma->chan) /* Terminate if any */ + msm_stop_dma(port, dma); + /* calculate and set baud rate */ - baud = uart_get_baud_rate(port, termios, old, 300, 115200); - baud = msm_set_baud_rate(port, baud); + baud = uart_get_baud_rate(port, termios, old, 300, 4000000); + baud = msm_set_baud_rate(port, baud, &flags); if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); @@ -588,6 +1103,9 @@ static void msm_set_termios(struct uart_port *port, struct ktermios *termios, uart_update_timeout(port, termios->c_cflag, baud); + /* Try to use DMA */ + msm_start_rx_dma(msm_port); + spin_unlock_irqrestore(&port->lock, flags); } @@ -765,7 +1283,7 @@ static void msm_poll_put_char(struct uart_port *port, unsigned char c) msm_write(port, 0, UART_IMR); if (msm_port->is_uartdm) - reset_dm_count(port, 1); + msm_reset_dm_count(port, 1); /* Wait until FIFO is empty */ while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) @@ -839,7 +1357,7 @@ static struct msm_port msm_uart_ports[] = { #define UART_NR ARRAY_SIZE(msm_uart_ports) -static inline struct uart_port *get_port_from_line(unsigned int line) +static inline struct uart_port *msm_get_port_from_line(unsigned int line) { return &msm_uart_ports[line].uart; } @@ -866,7 +1384,7 @@ static void __msm_console_write(struct uart_port *port, const char *s, spin_lock(&port->lock); if (is_uartdm) - reset_dm_count(port, count); + msm_reset_dm_count(port, count); i = 0; while (i < count) { @@ -911,7 +1429,7 @@ static void msm_console_write(struct console *co, const char *s, BUG_ON(co->index < 0 || co->index >= UART_NR); - port = get_port_from_line(co->index); + port = msm_get_port_from_line(co->index); msm_port = UART_TO_MSM(port); __msm_console_write(port, s, count, msm_port->is_uartdm); @@ -928,7 +1446,7 @@ static int __init msm_console_setup(struct console *co, char *options) if (unlikely(co->index >= UART_NR || co->index < 0)) return -ENXIO; - port = get_port_from_line(co->index); + port = msm_get_port_from_line(co->index); if (unlikely(!port->membase)) return -ENXIO; @@ -1043,7 +1561,7 @@ static int msm_serial_probe(struct platform_device *pdev) dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line); - port = get_port_from_line(line); + port = msm_get_port_from_line(line); port->dev = &pdev->dev; msm_port = UART_TO_MSM(port); diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h index 737f69fe7113..178645826f16 100644 --- a/drivers/tty/serial/msm_serial.h +++ b/drivers/tty/serial/msm_serial.h @@ -20,11 +20,12 @@ #define UART_MR1_AUTO_RFR_LEVEL0 0x3F #define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00 -#define UART_MR1_RX_RDY_CTL (1 << 7) -#define UART_MR1_CTS_CTL (1 << 6) +#define UART_DM_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00 +#define UART_MR1_RX_RDY_CTL BIT(7) +#define UART_MR1_CTS_CTL BIT(6) #define UART_MR2 0x0004 -#define UART_MR2_ERROR_MODE (1 << 6) +#define UART_MR2_ERROR_MODE BIT(6) #define UART_MR2_BITS_PER_CHAR 0x30 #define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4) #define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4) @@ -58,26 +59,28 @@ #define UART_CR_CMD_SET_RFR (13 << 4) #define UART_CR_CMD_RESET_RFR (14 << 4) #define UART_CR_CMD_PROTECTION_EN (16 << 4) +#define UART_CR_CMD_STALE_EVENT_DISABLE (6 << 8) #define UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4) #define UART_CR_CMD_FORCE_STALE (4 << 8) #define UART_CR_CMD_RESET_TX_READY (3 << 8) -#define UART_CR_TX_DISABLE (1 << 3) -#define UART_CR_TX_ENABLE (1 << 2) -#define UART_CR_RX_DISABLE (1 << 1) -#define UART_CR_RX_ENABLE (1 << 0) +#define UART_CR_TX_DISABLE BIT(3) +#define UART_CR_TX_ENABLE BIT(2) +#define UART_CR_RX_DISABLE BIT(1) +#define UART_CR_RX_ENABLE BIT(0) #define UART_CR_CMD_RESET_RXBREAK_START ((1 << 11) | (2 << 4)) #define UART_IMR 0x0014 -#define UART_IMR_TXLEV (1 << 0) -#define UART_IMR_RXSTALE (1 << 3) -#define UART_IMR_RXLEV (1 << 4) -#define UART_IMR_DELTA_CTS (1 << 5) -#define UART_IMR_CURRENT_CTS (1 << 6) -#define UART_IMR_RXBREAK_START (1 << 10) +#define UART_IMR_TXLEV BIT(0) +#define UART_IMR_RXSTALE BIT(3) +#define UART_IMR_RXLEV BIT(4) +#define UART_IMR_DELTA_CTS BIT(5) +#define UART_IMR_CURRENT_CTS BIT(6) +#define UART_IMR_RXBREAK_START BIT(10) #define UART_IPR_RXSTALE_LAST 0x20 #define UART_IPR_STALE_LSB 0x1F #define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80 +#define UART_DM_IPR_STALE_TIMEOUT_MSB 0xFFFFFF80 #define UART_IPR 0x0018 #define UART_TFWR 0x001C @@ -96,20 +99,20 @@ #define UART_TEST_CTRL 0x0050 #define UART_SR 0x0008 -#define UART_SR_HUNT_CHAR (1 << 7) -#define UART_SR_RX_BREAK (1 << 6) -#define UART_SR_PAR_FRAME_ERR (1 << 5) -#define UART_SR_OVERRUN (1 << 4) -#define UART_SR_TX_EMPTY (1 << 3) -#define UART_SR_TX_READY (1 << 2) -#define UART_SR_RX_FULL (1 << 1) -#define UART_SR_RX_READY (1 << 0) +#define UART_SR_HUNT_CHAR BIT(7) +#define UART_SR_RX_BREAK BIT(6) +#define UART_SR_PAR_FRAME_ERR BIT(5) +#define UART_SR_OVERRUN BIT(4) +#define UART_SR_TX_EMPTY BIT(3) +#define UART_SR_TX_READY BIT(2) +#define UART_SR_RX_FULL BIT(1) +#define UART_SR_RX_READY BIT(0) #define UART_RF 0x000C #define UARTDM_RF 0x0070 #define UART_MISR 0x0010 #define UART_ISR 0x0014 -#define UART_ISR_TX_READY (1 << 7) +#define UART_ISR_TX_READY BIT(7) #define UARTDM_RXFS 0x50 #define UARTDM_RXFS_BUF_SHIFT 0x7 @@ -119,6 +122,12 @@ #define UARTDM_DMEN_RX_SC_ENABLE BIT(5) #define UARTDM_DMEN_TX_SC_ENABLE BIT(4) +#define UARTDM_DMEN_TX_BAM_ENABLE BIT(2) /* UARTDM_1P4 */ +#define UARTDM_DMEN_TX_DM_ENABLE BIT(0) /* < UARTDM_1P4 */ + +#define UARTDM_DMEN_RX_BAM_ENABLE BIT(3) /* UARTDM_1P4 */ +#define UARTDM_DMEN_RX_DM_ENABLE BIT(1) /* < UARTDM_1P4 */ + #define UARTDM_DMRX 0x34 #define UARTDM_NCF_TX 0x40 #define UARTDM_RX_TOTAL_SNAP 0x38 diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c index dd26511ad875..8a4be4b73723 100644 --- a/drivers/tty/serial/mux.c +++ b/drivers/tty/serial/mux.c @@ -412,19 +412,14 @@ static int mux_console_setup(struct console *co, char *options) return 0; } -struct tty_driver *mux_console_device(struct console *co, int *index) -{ - *index = co->index; - return mux_driver.tty_driver; -} - static struct console mux_console = { .name = "ttyB", .write = mux_console_write, - .device = mux_console_device, + .device = uart_console_device, .setup = mux_console_setup, .flags = CON_ENABLED | CON_PRINTBUFFER, .index = 0, + .data = &mux_driver, }; #define MUX_CONSOLE &mux_console diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 7c7f30809849..cd0414bbe094 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1196,7 +1196,7 @@ static int mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev) enum mctrl_gpio_idx i; struct gpio_desc *gpiod; - s->gpios = mctrl_gpio_init(dev, 0); + s->gpios = mctrl_gpio_init_noauto(dev, 0); if (IS_ERR(s->gpios)) return PTR_ERR(s->gpios); diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 6823df99bd76..de5029649795 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -21,6 +21,10 @@ #include <linux/nwpserial.h> #include <linux/clk.h> +#ifdef CONFIG_SERIAL_8250_MODULE +#define CONFIG_SERIAL_8250 CONFIG_SERIAL_8250_MODULE +#endif + #include "8250/8250.h" struct of_serial_info { @@ -150,6 +154,11 @@ static int of_platform_serial_setup(struct platform_device *ofdev, break; } + if (IS_ENABLED(CONFIG_SERIAL_8250_FSL) && + (of_device_is_compatible(np, "fsl,ns16550") || + of_device_is_compatible(np, "fsl,16550-FIFO64"))) + port->handle_irq = fsl8250_handle_irq; + return 0; out: if (info->clk) @@ -350,6 +359,7 @@ static const struct of_device_id of_platform_serial_table[] = { #endif { /* end of list */ }, }; +MODULE_DEVICE_TABLE(of, of_platform_serial_table); static struct platform_driver of_platform_serial_driver = { .driver = { diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 7a2172b5e93c..9d4c84f7485f 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -199,6 +199,7 @@ static inline void serial_omap_clear_fifos(struct uart_omap_port *up) serial_out(up, UART_FCR, 0); } +#ifdef CONFIG_PM static int serial_omap_get_context_loss_count(struct uart_omap_port *up) { struct omap_uart_port_info *pdata = dev_get_platdata(up->dev); @@ -219,6 +220,7 @@ static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) pdata->enable_wakeup(up->dev, enable); } +#endif /* CONFIG_PM */ /* * Calculate the absolute difference between the desired and actual baud diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 856686d6dcdb..d72cd736bdc6 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -385,32 +385,6 @@ static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport, } } -static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, - unsigned long ufstat); - -static void uart_rx_drain_fifo(struct s3c24xx_uart_port *ourport) -{ - struct uart_port *port = &ourport->port; - struct tty_port *tty = &port->state->port; - unsigned int ch, ufstat; - unsigned int count; - - ufstat = rd_regl(port, S3C2410_UFSTAT); - count = s3c24xx_serial_rx_fifocnt(ourport, ufstat); - - if (!count) - return; - - while (count-- > 0) { - ch = rd_regb(port, S3C2410_URXH); - - ourport->port.icount.rx++; - tty_insert_flip_char(tty, ch, TTY_NORMAL); - } - - tty_flip_buffer_push(tty); -} - static void s3c24xx_serial_stop_rx(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); @@ -573,7 +547,9 @@ static void enable_rx_pio(struct s3c24xx_uart_port *ourport) ourport->rx_mode = S3C24XX_RX_PIO; } -static irqreturn_t s3c24xx_serial_rx_chars_dma(int irq, void *dev_id) +static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport); + +static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id) { unsigned int utrstat, ufstat, received; struct s3c24xx_uart_port *ourport = dev_id; @@ -606,7 +582,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_dma(int irq, void *dev_id) enable_rx_pio(ourport); } - uart_rx_drain_fifo(ourport); + s3c24xx_serial_rx_drain_fifo(ourport); if (tty) { tty_flip_buffer_push(t); @@ -621,16 +597,12 @@ finish: return IRQ_HANDLED; } -static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id) +static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport) { - struct s3c24xx_uart_port *ourport = dev_id; struct uart_port *port = &ourport->port; unsigned int ufcon, ch, flag, ufstat, uerstat; - unsigned long flags; int max_count = port->fifosize; - spin_lock_irqsave(&port->lock, flags); - while (max_count-- > 0) { ufcon = rd_regl(port, S3C2410_UFCON); ufstat = rd_regl(port, S3C2410_UFSTAT); @@ -654,9 +626,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id) ufcon |= S3C2410_UFCON_RESETRX; wr_regl(port, S3C2410_UFCON, ufcon); rx_enabled(port) = 1; - spin_unlock_irqrestore(&port->lock, - flags); - goto out; + return; } continue; } @@ -676,7 +646,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id) dbg("break!\n"); port->icount.brk++; if (uart_handle_break(port)) - goto ignore_char; + continue; /* Ignore character */ } if (uerstat & S3C2410_UERSTAT_FRAME) @@ -696,19 +666,25 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id) } if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; + continue; /* Ignore character */ uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, ch, flag); - -ignore_char: - continue; } - spin_unlock_irqrestore(&port->lock, flags); tty_flip_buffer_push(&port->state->port); +} + +static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id) +{ + struct s3c24xx_uart_port *ourport = dev_id; + struct uart_port *port = &ourport->port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + s3c24xx_serial_rx_drain_fifo(ourport); + spin_unlock_irqrestore(&port->lock, flags); -out: return IRQ_HANDLED; } @@ -718,8 +694,8 @@ static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id) struct s3c24xx_uart_port *ourport = dev_id; if (ourport->dma && ourport->dma->rx_chan) - return s3c24xx_serial_rx_chars_dma(irq, dev_id); - return s3c24xx_serial_rx_chars_pio(irq, dev_id); + return s3c24xx_serial_rx_chars_dma(dev_id); + return s3c24xx_serial_rx_chars_pio(dev_id); } static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 72ffd0dcab78..edb5305b9d4d 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1321,6 +1321,9 @@ static int sc16is7xx_spi_probe(struct spi_device *spi) const struct of_device_id *of_id = of_match_device(sc16is7xx_dt_ids, &spi->dev); + if (!of_id) + return -ENODEV; + devtype = (struct sc16is7xx_devtype *)of_id->data; } else { const struct spi_device_id *id_entry = spi_get_device_id(spi); @@ -1357,7 +1360,6 @@ MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table); static struct spi_driver sc16is7xx_spi_uart_driver = { .driver = { .name = SC16IS7XX_NAME, - .owner = THIS_MODULE, .of_match_table = of_match_ptr(sc16is7xx_dt_ids), }, .probe = sc16is7xx_spi_probe, @@ -1380,6 +1382,9 @@ static int sc16is7xx_i2c_probe(struct i2c_client *i2c, const struct of_device_id *of_id = of_match_device(sc16is7xx_dt_ids, &i2c->dev); + if (!of_id) + return -ENODEV; + devtype = (struct sc16is7xx_devtype *)of_id->data; } else { devtype = (struct sc16is7xx_devtype *)id->driver_data; @@ -1420,7 +1425,6 @@ static struct i2c_driver sc16is7xx_i2c_uart_driver = { .id_table = sc16is7xx_i2c_id_table, }; -MODULE_ALIAS("i2c:sc16is7xx"); #endif static int __init sc16is7xx_init(void) diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index cf0133ae762d..1d6fc60ed013 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -186,7 +186,6 @@ static void set_rts(struct tegra_uart_port *tup, bool active) tegra_uart_write(tup, mcr, UART_MCR); tup->mcr_shadow = mcr; } - return; } static void set_dtr(struct tegra_uart_port *tup, bool active) @@ -202,7 +201,6 @@ static void set_dtr(struct tegra_uart_port *tup, bool active) tegra_uart_write(tup, mcr, UART_MCR); tup->mcr_shadow = mcr; } - return; } static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl) @@ -217,7 +215,6 @@ static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl) dtr_enable = !!(mctrl & TIOCM_DTR); set_dtr(tup, dtr_enable); - return; } static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl) @@ -511,7 +508,6 @@ static void tegra_uart_stop_tx(struct uart_port *u) async_tx_ack(tup->tx_dma_desc); xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); tup->tx_in_progress = 0; - return; } static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup) @@ -523,7 +519,6 @@ static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&tup->uport); tegra_uart_start_next_tx(tup); - return; } static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup, @@ -545,8 +540,6 @@ static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup, if (!uart_handle_sysrq_char(&tup->uport, ch) && tty) tty_insert_flip_char(tty, ch, flag); } while (1); - - return; } static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup, @@ -576,13 +569,30 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup, TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE); } +static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup, + unsigned int residue) +{ + struct tty_port *port = &tup->uport.state->port; + struct tty_struct *tty = tty_port_tty_get(port); + unsigned int count; + + async_tx_ack(tup->rx_dma_desc); + count = tup->rx_bytes_requested - residue; + + /* If we are here, DMA is stopped */ + tegra_uart_copy_rx_to_tty(tup, port, count); + + tegra_uart_handle_rx_pio(tup, port); + if (tty) { + tty_flip_buffer_push(port); + tty_kref_put(tty); + } +} + static void tegra_uart_rx_dma_complete(void *args) { struct tegra_uart_port *tup = args; struct uart_port *u = &tup->uport; - unsigned int count = tup->rx_bytes_requested; - struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); - struct tty_port *port = &u->state->port; unsigned long flags; struct dma_tx_state state; enum dma_status status; @@ -596,22 +606,11 @@ static void tegra_uart_rx_dma_complete(void *args) goto done; } - async_tx_ack(tup->rx_dma_desc); - /* Deactivate flow control to stop sender */ if (tup->rts_active) set_rts(tup, false); - /* If we are here, DMA is stopped */ - tegra_uart_copy_rx_to_tty(tup, port, count); - - tegra_uart_handle_rx_pio(tup, port); - if (tty) { - spin_unlock_irqrestore(&u->lock, flags); - tty_flip_buffer_push(port); - spin_lock_irqsave(&u->lock, flags); - tty_kref_put(tty); - } + tegra_uart_rx_buffer_push(tup, 0); tegra_uart_start_rx_dma(tup); /* Activate flow control to start transfer */ @@ -622,34 +621,17 @@ done: spin_unlock_irqrestore(&u->lock, flags); } -static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup, - unsigned long *flags) +static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup) { struct dma_tx_state state; - struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); - struct tty_port *port = &tup->uport.state->port; - struct uart_port *u = &tup->uport; - unsigned int count; /* Deactivate flow control to stop sender */ if (tup->rts_active) set_rts(tup, false); dmaengine_terminate_all(tup->rx_dma_chan); - dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); - async_tx_ack(tup->rx_dma_desc); - count = tup->rx_bytes_requested - state.residue; - - /* If we are here, DMA is stopped */ - tegra_uart_copy_rx_to_tty(tup, port, count); - - tegra_uart_handle_rx_pio(tup, port); - if (tty) { - spin_unlock_irqrestore(&u->lock, *flags); - tty_flip_buffer_push(port); - spin_lock_irqsave(&u->lock, *flags); - tty_kref_put(tty); - } + dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); + tegra_uart_rx_buffer_push(tup, state.residue); tegra_uart_start_rx_dma(tup); if (tup->rts_active) @@ -697,7 +679,6 @@ static void tegra_uart_handle_modem_signal_change(struct uart_port *u) /* Will start/stop_tx accordingly */ if (msr & UART_MSR_DCTS) uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS); - return; } static irqreturn_t tegra_uart_isr(int irq, void *data) @@ -714,7 +695,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data) iir = tegra_uart_read(tup, UART_IIR); if (iir & UART_IIR_NO_INT) { if (is_rx_int) { - tegra_uart_handle_rx_dma(tup, &flags); + tegra_uart_handle_rx_dma(tup); if (tup->rx_in_progress) { ier = tup->ier_shadow; ier |= (UART_IER_RLSI | UART_IER_RTOIE | @@ -769,11 +750,8 @@ static irqreturn_t tegra_uart_isr(int irq, void *data) static void tegra_uart_stop_rx(struct uart_port *u) { struct tegra_uart_port *tup = to_tegra_uport(u); - struct tty_struct *tty; - struct tty_port *port = &u->state->port; struct dma_tx_state state; unsigned long ier; - int count; if (tup->rts_active) set_rts(tup, false); @@ -781,8 +759,6 @@ static void tegra_uart_stop_rx(struct uart_port *u) if (!tup->rx_in_progress) return; - tty = tty_port_tty_get(&tup->uport.state->port); - tegra_uart_wait_sym_time(tup, 1); /* wait a character interval */ ier = tup->ier_shadow; @@ -791,21 +767,9 @@ static void tegra_uart_stop_rx(struct uart_port *u) tup->ier_shadow = ier; tegra_uart_write(tup, ier, UART_IER); tup->rx_in_progress = 0; - if (tup->rx_dma_chan) { - dmaengine_terminate_all(tup->rx_dma_chan); - dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); - async_tx_ack(tup->rx_dma_desc); - count = tup->rx_bytes_requested - state.residue; - tegra_uart_copy_rx_to_tty(tup, port, count); - tegra_uart_handle_rx_pio(tup, port); - } else { - tegra_uart_handle_rx_pio(tup, port); - } - if (tty) { - tty_flip_buffer_push(port); - tty_kref_put(tty); - } - return; + dmaengine_terminate_all(tup->rx_dma_chan); + dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); + tegra_uart_rx_buffer_push(tup, state.residue); } static void tegra_uart_hw_deinit(struct tegra_uart_port *tup) @@ -1083,7 +1047,6 @@ static void tegra_uart_flush_buffer(struct uart_port *u) tup->tx_bytes = 0; if (tup->tx_dma_chan) dmaengine_terminate_all(tup->tx_dma_chan); - return; } static void tegra_uart_shutdown(struct uart_port *u) @@ -1223,7 +1186,6 @@ static void tegra_uart_set_termios(struct uart_port *u, tegra_uart_read(tup, UART_IER); spin_unlock_irqrestore(&u->lock, flags); - return; } static const char *tegra_uart_type(struct uart_port *u) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 603d2cc3f424..def5199ca004 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1437,7 +1437,6 @@ static void uart_close(struct tty_struct *tty, struct file *filp) clear_bit(ASYNCB_CLOSING, &port->flags); spin_unlock_irq(&port->lock); wake_up_interruptible(&port->open_wait); - wake_up_interruptible(&port->close_wait); mutex_unlock(&port->mutex); @@ -1819,8 +1818,8 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co) * @options: ptr for <options> field; NULL if not present (out) * * Decodes earlycon kernel command line parameters of the form - * earlycon=<name>,io|mmio|mmio32|mmio32be,<addr>,<options> - * console=<name>,io|mmio|mmio32|mmio32be,<addr>,<options> + * earlycon=<name>,io|mmio|mmio32|mmio32be|mmio32native,<addr>,<options> + * console=<name>,io|mmio|mmio32|mmio32be|mmio32native,<addr>,<options> * * The optional form * earlycon=<name>,0x<addr>,<options> @@ -1841,6 +1840,10 @@ int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr, } else if (strncmp(p, "mmio32be,", 9) == 0) { *iotype = UPIO_MEM32BE; p += 9; + } else if (strncmp(p, "mmio32native,", 13) == 0) { + *iotype = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) ? + UPIO_MEM32BE : UPIO_MEM32; + p += 13; } else if (strncmp(p, "io,", 3) == 0) { *iotype = UPIO_PORT; p += 3; diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c index 402f7fb54133..3eb57eb532f1 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.c +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -12,18 +12,23 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * */ #include <linux/err.h> #include <linux/device.h> +#include <linux/irq.h> #include <linux/gpio/consumer.h> #include <linux/termios.h> +#include <linux/serial_core.h> #include "serial_mctrl_gpio.h" struct mctrl_gpios { + struct uart_port *port; struct gpio_desc *gpio[UART_GPIO_MAX]; + int irq[UART_GPIO_MAX]; + unsigned int mctrl_prev; + bool mctrl_on; }; static const struct { @@ -82,7 +87,7 @@ unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl) } EXPORT_SYMBOL_GPL(mctrl_gpio_get); -struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx) +struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx) { struct mctrl_gpios *gpios; enum mctrl_gpio_idx i; @@ -110,15 +115,135 @@ struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx) return gpios; } -EXPORT_SYMBOL_GPL(mctrl_gpio_init); +EXPORT_SYMBOL_GPL(mctrl_gpio_init_noauto); + +#define MCTRL_ANY_DELTA (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS) +static irqreturn_t mctrl_gpio_irq_handle(int irq, void *context) +{ + struct mctrl_gpios *gpios = context; + struct uart_port *port = gpios->port; + u32 mctrl = gpios->mctrl_prev; + u32 mctrl_diff; + + mctrl_gpio_get(gpios, &mctrl); + + mctrl_diff = mctrl ^ gpios->mctrl_prev; + gpios->mctrl_prev = mctrl; + + if (mctrl_diff & MCTRL_ANY_DELTA && port->state != NULL) { + if ((mctrl_diff & mctrl) & TIOCM_RI) + port->icount.rng++; + + if ((mctrl_diff & mctrl) & TIOCM_DSR) + port->icount.dsr++; + + if (mctrl_diff & TIOCM_CD) + uart_handle_dcd_change(port, mctrl & TIOCM_CD); + + if (mctrl_diff & TIOCM_CTS) + uart_handle_cts_change(port, mctrl & TIOCM_CTS); + + wake_up_interruptible(&port->state->port.delta_msr_wait); + } + + return IRQ_HANDLED; +} + +struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx) +{ + struct mctrl_gpios *gpios; + enum mctrl_gpio_idx i; + + gpios = mctrl_gpio_init_noauto(port->dev, idx); + if (IS_ERR(gpios)) + return gpios; + + gpios->port = port; + + for (i = 0; i < UART_GPIO_MAX; ++i) { + int ret; + + if (!gpios->gpio[i] || mctrl_gpios_desc[i].dir_out) + continue; + + ret = gpiod_to_irq(gpios->gpio[i]); + if (ret <= 0) { + dev_err(port->dev, + "failed to find corresponding irq for %s (idx=%d, err=%d)\n", + mctrl_gpios_desc[i].name, idx, ret); + return ERR_PTR(ret); + } + gpios->irq[i] = ret; + + /* irqs should only be enabled in .enable_ms */ + irq_set_status_flags(gpios->irq[i], IRQ_NOAUTOEN); + + ret = devm_request_irq(port->dev, gpios->irq[i], + mctrl_gpio_irq_handle, + IRQ_TYPE_EDGE_BOTH, dev_name(port->dev), + gpios); + if (ret) { + /* alternatively implement polling */ + dev_err(port->dev, + "failed to request irq for %s (idx=%d, err=%d)\n", + mctrl_gpios_desc[i].name, idx, ret); + return ERR_PTR(ret); + } + } + + return gpios; +} void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios) { enum mctrl_gpio_idx i; - for (i = 0; i < UART_GPIO_MAX; i++) + for (i = 0; i < UART_GPIO_MAX; i++) { + if (gpios->irq[i]) + devm_free_irq(gpios->port->dev, gpios->irq[i], gpios); + if (gpios->gpio[i]) devm_gpiod_put(dev, gpios->gpio[i]); + } devm_kfree(dev, gpios); } EXPORT_SYMBOL_GPL(mctrl_gpio_free); + +void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + /* .enable_ms may be called multiple times */ + if (gpios->mctrl_on) + return; + + gpios->mctrl_on = true; + + /* get initial status of modem lines GPIOs */ + mctrl_gpio_get(gpios, &gpios->mctrl_prev); + + for (i = 0; i < UART_GPIO_MAX; ++i) { + if (!gpios->irq[i]) + continue; + + enable_irq(gpios->irq[i]); + } +} +EXPORT_SYMBOL_GPL(mctrl_gpio_enable_ms); + +void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + if (!gpios->mctrl_on) + return; + + gpios->mctrl_on = false; + + for (i = 0; i < UART_GPIO_MAX; ++i) { + if (!gpios->irq[i]) + continue; + + disable_irq(gpios->irq[i]); + } +} diff --git a/drivers/tty/serial/serial_mctrl_gpio.h b/drivers/tty/serial/serial_mctrl_gpio.h index 400ba0494a17..9716db283290 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.h +++ b/drivers/tty/serial/serial_mctrl_gpio.h @@ -22,6 +22,8 @@ #include <linux/device.h> #include <linux/gpio/consumer.h> +struct uart_port; + enum mctrl_gpio_idx { UART_GPIO_CTS, UART_GPIO_DSR, @@ -60,12 +62,22 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, enum mctrl_gpio_idx gidx); /* + * Request and set direction of modem control lines GPIOs and sets up irq + * handling. + * devm_* functions are used, so there's no need to call mctrl_gpio_free(). + * Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on + * allocation error. + */ +struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx); + +/* * Request and set direction of modem control lines GPIOs. * devm_* functions are used, so there's no need to call mctrl_gpio_free(). * Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on * allocation error. */ -struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx); +struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, + unsigned int idx); /* * Free the mctrl_gpios structure. @@ -74,6 +86,16 @@ struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx); */ void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios); +/* + * Enable gpio interrupts to report status line changes. + */ +void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios); + +/* + * Disable gpio interrupts to report status line changes. + */ +void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios); + #else /* GPIOLIB */ static inline @@ -95,7 +117,13 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, } static inline -struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx) +struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx) +{ + return ERR_PTR(-ENOSYS); +} + +static inline +struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx) { return ERR_PTR(-ENOSYS); } @@ -105,6 +133,14 @@ void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios) { } +static inline void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios) +{ +} + +static inline void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios) +{ +} + #endif /* GPIOLIB */ #endif diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 1b2f894bdc9e..960e50a97558 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -84,6 +84,7 @@ struct sci_port { unsigned int overrun_reg; unsigned int overrun_mask; unsigned int error_mask; + unsigned int error_clear; unsigned int sampling_rate; resource_size_t reg_size; @@ -103,19 +104,15 @@ struct sci_port { struct dma_chan *chan_rx; #ifdef CONFIG_SERIAL_SH_SCI_DMA - struct dma_async_tx_descriptor *desc_tx; - struct dma_async_tx_descriptor *desc_rx[2]; dma_cookie_t cookie_tx; dma_cookie_t cookie_rx[2]; dma_cookie_t active_rx; - struct scatterlist sg_tx; - unsigned int sg_len_tx; + dma_addr_t tx_dma_addr; + unsigned int tx_dma_len; struct scatterlist sg_rx[2]; + void *rx_buf[2]; size_t buf_len_rx; - struct sh_dmae_slave param_tx; - struct sh_dmae_slave param_rx; struct work_struct work_tx; - struct work_struct work_rx; struct timer_list rx_timer; unsigned int rx_timeout; #endif @@ -123,11 +120,6 @@ struct sci_port { struct notifier_block freq_transition; }; -/* Function prototypes */ -static void sci_start_tx(struct uart_port *port); -static void sci_stop_tx(struct uart_port *port); -static void sci_start_rx(struct uart_port *port); - #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS static struct sci_port sci_ports[SCI_NPORTS]; @@ -146,7 +138,7 @@ struct plat_sci_reg { /* Helper for invalidating specific entries of an inherited map. */ #define sci_reg_invalid { .offset = 0, .size = 0 } -static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { +static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCIx_PROBE_REGTYPE] = { [0 ... SCIx_NR_REGS - 1] = sci_reg_invalid, }, @@ -399,7 +391,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { */ static unsigned int sci_serial_in(struct uart_port *p, int offset) { - struct plat_sci_reg *reg = sci_getreg(p, offset); + const struct plat_sci_reg *reg = sci_getreg(p, offset); if (reg->size == 8) return ioread8(p->membase + (reg->offset << p->regshift)); @@ -413,7 +405,7 @@ static unsigned int sci_serial_in(struct uart_port *p, int offset) static void sci_serial_out(struct uart_port *p, int offset, int value) { - struct plat_sci_reg *reg = sci_getreg(p, offset); + const struct plat_sci_reg *reg = sci_getreg(p, offset); if (reg->size == 8) iowrite8(value, p->membase + (reg->offset << p->regshift)); @@ -489,6 +481,105 @@ static void sci_port_disable(struct sci_port *sci_port) pm_runtime_put_sync(sci_port->port.dev); } +static inline unsigned long port_rx_irq_mask(struct uart_port *port) +{ + /* + * Not all ports (such as SCIFA) will support REIE. Rather than + * special-casing the port type, we check the port initialization + * IRQ enable mask to see whether the IRQ is desired at all. If + * it's unset, it's logically inferred that there's no point in + * testing for it. + */ + return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE); +} + +static void sci_start_tx(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + unsigned short ctrl; + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 new, scr = serial_port_in(port, SCSCR); + if (s->chan_tx) + new = scr | SCSCR_TDRQE; + else + new = scr & ~SCSCR_TDRQE; + if (new != scr) + serial_port_out(port, SCSCR, new); + } + + if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && + dma_submit_error(s->cookie_tx)) { + s->cookie_tx = 0; + schedule_work(&s->work_tx); + } +#endif + + if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ + ctrl = serial_port_in(port, SCSCR); + serial_port_out(port, SCSCR, ctrl | SCSCR_TIE); + } +} + +static void sci_stop_tx(struct uart_port *port) +{ + unsigned short ctrl; + + /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ + ctrl = serial_port_in(port, SCSCR); + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + ctrl &= ~SCSCR_TDRQE; + + ctrl &= ~SCSCR_TIE; + + serial_port_out(port, SCSCR, ctrl); +} + +static void sci_start_rx(struct uart_port *port) +{ + unsigned short ctrl; + + ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port); + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + ctrl &= ~SCSCR_RDRQE; + + serial_port_out(port, SCSCR, ctrl); +} + +static void sci_stop_rx(struct uart_port *port) +{ + unsigned short ctrl; + + ctrl = serial_port_in(port, SCSCR); + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + ctrl &= ~SCSCR_RDRQE; + + ctrl &= ~port_rx_irq_mask(port); + + serial_port_out(port, SCSCR, ctrl); +} + +static void sci_clear_SCxSR(struct uart_port *port, unsigned int mask) +{ + if (port->type == PORT_SCI) { + /* Just store the mask */ + serial_port_out(port, SCxSR, mask); + } else if (to_sci_port(port)->overrun_mask == SCIFA_ORER) { + /* SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 */ + /* Only clear the status bits we want to clear */ + serial_port_out(port, SCxSR, + serial_port_in(port, SCxSR) & mask); + } else { + /* Store the mask, clear parity/framing errors */ + serial_port_out(port, SCxSR, mask & ~(SCIF_FERC | SCIF_PERC)); + } +} + #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) #ifdef CONFIG_CONSOLE_POLL @@ -500,7 +591,7 @@ static int sci_poll_get_char(struct uart_port *port) do { status = serial_port_in(port, SCxSR); if (status & SCxSR_ERRORS(port)) { - serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); + sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port)); continue; } break; @@ -513,7 +604,7 @@ static int sci_poll_get_char(struct uart_port *port) /* Dummy read */ serial_port_in(port, SCxSR); - serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); return c; } @@ -528,14 +619,14 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c) } while (!(status & SCxSR_TDxE(port))); serial_port_out(port, SCxTDR, c); - serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); + sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); } #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ static void sci_init_pins(struct uart_port *port, unsigned int cflag) { struct sci_port *s = to_sci_port(port); - struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; + const struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; /* * Use port-specific handler if provided. @@ -565,7 +656,7 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag) static int sci_txfill(struct uart_port *port) { - struct plat_sci_reg *reg; + const struct plat_sci_reg *reg; reg = sci_getreg(port, SCTFDR); if (reg->size) @@ -585,7 +676,7 @@ static int sci_txroom(struct uart_port *port) static int sci_rxfill(struct uart_port *port) { - struct plat_sci_reg *reg; + const struct plat_sci_reg *reg; reg = sci_getreg(port, SCRFDR); if (reg->size) @@ -655,7 +746,7 @@ static void sci_transmit_chars(struct uart_port *port) port->icount.tx++; } while (--count > 0); - serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port)); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); @@ -666,7 +757,7 @@ static void sci_transmit_chars(struct uart_port *port) if (port->type != PORT_SCI) { serial_port_in(port, SCxSR); /* Dummy read */ - serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port)); } ctrl |= SCSCR_TIE; @@ -750,7 +841,7 @@ static void sci_receive_chars(struct uart_port *port) } serial_port_in(port, SCxSR); /* dummy read */ - serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); copied += count; port->icount.rx += count; @@ -761,7 +852,7 @@ static void sci_receive_chars(struct uart_port *port) tty_flip_buffer_push(tport); } else { serial_port_in(port, SCxSR); /* dummy read */ - serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); } } @@ -866,7 +957,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port) { struct tty_port *tport = &port->state->port; struct sci_port *s = to_sci_port(port); - struct plat_sci_reg *reg; + const struct plat_sci_reg *reg; int copied = 0; u16 status; @@ -924,6 +1015,460 @@ static int sci_handle_breaks(struct uart_port *port) return copied; } +#ifdef CONFIG_SERIAL_SH_SCI_DMA +static void sci_dma_tx_complete(void *arg) +{ + struct sci_port *s = arg; + struct uart_port *port = &s->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; + + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + + spin_lock_irqsave(&port->lock, flags); + + xmit->tail += s->tx_dma_len; + xmit->tail &= UART_XMIT_SIZE - 1; + + port->icount.tx += s->tx_dma_len; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (!uart_circ_empty(xmit)) { + s->cookie_tx = 0; + schedule_work(&s->work_tx); + } else { + s->cookie_tx = -EINVAL; + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 ctrl = serial_port_in(port, SCSCR); + serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE); + } + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Locking: called with port lock held */ +static int sci_dma_rx_push(struct sci_port *s, void *buf, size_t count) +{ + struct uart_port *port = &s->port; + struct tty_port *tport = &port->state->port; + int copied; + + copied = tty_insert_flip_string(tport, buf, count); + if (copied < count) { + dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n", + count - copied); + port->icount.buf_overrun++; + } + + port->icount.rx += copied; + + return copied; +} + +static int sci_dma_rx_find_active(struct sci_port *s) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->cookie_rx); i++) + if (s->active_rx == s->cookie_rx[i]) + return i; + + dev_err(s->port.dev, "%s: Rx cookie %d not found!\n", __func__, + s->active_rx); + return -1; +} + +static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) +{ + struct dma_chan *chan = s->chan_rx; + struct uart_port *port = &s->port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + s->chan_rx = NULL; + s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; + spin_unlock_irqrestore(&port->lock, flags); + dmaengine_terminate_all(chan); + dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0], + sg_dma_address(&s->sg_rx[0])); + dma_release_channel(chan); + if (enable_pio) + sci_start_rx(port); +} + +static void sci_dma_rx_complete(void *arg) +{ + struct sci_port *s = arg; + struct dma_chan *chan = s->chan_rx; + struct uart_port *port = &s->port; + struct dma_async_tx_descriptor *desc; + unsigned long flags; + int active, count = 0; + + dev_dbg(port->dev, "%s(%d) active cookie %d\n", __func__, port->line, + s->active_rx); + + spin_lock_irqsave(&port->lock, flags); + + active = sci_dma_rx_find_active(s); + if (active >= 0) + count = sci_dma_rx_push(s, s->rx_buf[active], s->buf_len_rx); + + mod_timer(&s->rx_timer, jiffies + s->rx_timeout); + + if (count) + tty_flip_buffer_push(&port->state->port); + + desc = dmaengine_prep_slave_sg(s->chan_rx, &s->sg_rx[active], 1, + DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + goto fail; + + desc->callback = sci_dma_rx_complete; + desc->callback_param = s; + s->cookie_rx[active] = dmaengine_submit(desc); + if (dma_submit_error(s->cookie_rx[active])) + goto fail; + + s->active_rx = s->cookie_rx[!active]; + + dma_async_issue_pending(chan); + + dev_dbg(port->dev, "%s: cookie %d #%d, new active cookie %d\n", + __func__, s->cookie_rx[active], active, s->active_rx); + spin_unlock_irqrestore(&port->lock, flags); + return; + +fail: + spin_unlock_irqrestore(&port->lock, flags); + dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); + sci_rx_dma_release(s, true); +} + +static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) +{ + struct dma_chan *chan = s->chan_tx; + struct uart_port *port = &s->port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + s->chan_tx = NULL; + s->cookie_tx = -EINVAL; + spin_unlock_irqrestore(&port->lock, flags); + dmaengine_terminate_all(chan); + dma_unmap_single(chan->device->dev, s->tx_dma_addr, UART_XMIT_SIZE, + DMA_TO_DEVICE); + dma_release_channel(chan); + if (enable_pio) + sci_start_tx(port); +} + +static void sci_submit_rx(struct sci_port *s) +{ + struct dma_chan *chan = s->chan_rx; + int i; + + for (i = 0; i < 2; i++) { + struct scatterlist *sg = &s->sg_rx[i]; + struct dma_async_tx_descriptor *desc; + + desc = dmaengine_prep_slave_sg(chan, + sg, 1, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + goto fail; + + desc->callback = sci_dma_rx_complete; + desc->callback_param = s; + s->cookie_rx[i] = dmaengine_submit(desc); + if (dma_submit_error(s->cookie_rx[i])) + goto fail; + + dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__, + s->cookie_rx[i], i); + } + + s->active_rx = s->cookie_rx[0]; + + dma_async_issue_pending(chan); + return; + +fail: + if (i) + dmaengine_terminate_all(chan); + for (i = 0; i < 2; i++) + s->cookie_rx[i] = -EINVAL; + s->active_rx = -EINVAL; + dev_warn(s->port.dev, "Failed to re-start Rx DMA, using PIO\n"); + sci_rx_dma_release(s, true); +} + +static void work_fn_tx(struct work_struct *work) +{ + struct sci_port *s = container_of(work, struct sci_port, work_tx); + struct dma_async_tx_descriptor *desc; + struct dma_chan *chan = s->chan_tx; + struct uart_port *port = &s->port; + struct circ_buf *xmit = &port->state->xmit; + dma_addr_t buf; + + /* + * DMA is idle now. + * Port xmit buffer is already mapped, and it is one page... Just adjust + * offsets and lengths. Since it is a circular buffer, we have to + * transmit till the end, and then the rest. Take the port lock to get a + * consistent xmit buffer state. + */ + spin_lock_irq(&port->lock); + buf = s->tx_dma_addr + (xmit->tail & (UART_XMIT_SIZE - 1)); + s->tx_dma_len = min_t(unsigned int, + CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), + CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); + spin_unlock_irq(&port->lock); + + desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len, + DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n"); + /* switch to PIO */ + sci_tx_dma_release(s, true); + return; + } + + dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len, + DMA_TO_DEVICE); + + spin_lock_irq(&port->lock); + desc->callback = sci_dma_tx_complete; + desc->callback_param = s; + spin_unlock_irq(&port->lock); + s->cookie_tx = dmaengine_submit(desc); + if (dma_submit_error(s->cookie_tx)) { + dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); + /* switch to PIO */ + sci_tx_dma_release(s, true); + return; + } + + dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", + __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx); + + dma_async_issue_pending(chan); +} + +static void rx_timer_fn(unsigned long arg) +{ + struct sci_port *s = (struct sci_port *)arg; + struct dma_chan *chan = s->chan_rx; + struct uart_port *port = &s->port; + struct dma_tx_state state; + enum dma_status status; + unsigned long flags; + unsigned int read; + int active, count; + u16 scr; + + spin_lock_irqsave(&port->lock, flags); + + dev_dbg(port->dev, "DMA Rx timed out\n"); + + active = sci_dma_rx_find_active(s); + if (active < 0) { + spin_unlock_irqrestore(&port->lock, flags); + return; + } + + status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state); + if (status == DMA_COMPLETE) { + dev_dbg(port->dev, "Cookie %d #%d has already completed\n", + s->active_rx, active); + spin_unlock_irqrestore(&port->lock, flags); + + /* Let packet complete handler take care of the packet */ + return; + } + + dmaengine_pause(chan); + + /* + * sometimes DMA transfer doesn't stop even if it is stopped and + * data keeps on coming until transaction is complete so check + * for DMA_COMPLETE again + * Let packet complete handler take care of the packet + */ + status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state); + if (status == DMA_COMPLETE) { + spin_unlock_irqrestore(&port->lock, flags); + dev_dbg(port->dev, "Transaction complete after DMA engine was stopped"); + return; + } + + /* Handle incomplete DMA receive */ + dmaengine_terminate_all(s->chan_rx); + read = sg_dma_len(&s->sg_rx[active]) - state.residue; + dev_dbg(port->dev, "Read %u bytes with cookie %d\n", read, + s->active_rx); + + if (read) { + count = sci_dma_rx_push(s, s->rx_buf[active], read); + if (count) + tty_flip_buffer_push(&port->state->port); + } + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + sci_submit_rx(s); + + /* Direct new serial port interrupts back to CPU */ + scr = serial_port_in(port, SCSCR); + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + scr &= ~SCSCR_RDRQE; + enable_irq(s->irqs[SCIx_RXI_IRQ]); + } + serial_port_out(port, SCSCR, scr | SCSCR_RIE); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static struct dma_chan *sci_request_dma_chan(struct uart_port *port, + enum dma_transfer_direction dir, + unsigned int id) +{ + dma_cap_mask_t mask; + struct dma_chan *chan; + struct dma_slave_config cfg; + int ret; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + chan = dma_request_slave_channel_compat(mask, shdma_chan_filter, + (void *)(unsigned long)id, port->dev, + dir == DMA_MEM_TO_DEV ? "tx" : "rx"); + if (!chan) { + dev_warn(port->dev, + "dma_request_slave_channel_compat failed\n"); + return NULL; + } + + memset(&cfg, 0, sizeof(cfg)); + cfg.direction = dir; + if (dir == DMA_MEM_TO_DEV) { + cfg.dst_addr = port->mapbase + + (sci_getreg(port, SCxTDR)->offset << port->regshift); + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } else { + cfg.src_addr = port->mapbase + + (sci_getreg(port, SCxRDR)->offset << port->regshift); + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + } + + ret = dmaengine_slave_config(chan, &cfg); + if (ret) { + dev_warn(port->dev, "dmaengine_slave_config failed %d\n", ret); + dma_release_channel(chan); + return NULL; + } + + return chan; +} + +static void sci_request_dma(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + struct dma_chan *chan; + + dev_dbg(port->dev, "%s: port %d\n", __func__, port->line); + + if (!port->dev->of_node && + (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)) + return; + + s->cookie_tx = -EINVAL; + chan = sci_request_dma_chan(port, DMA_MEM_TO_DEV, s->cfg->dma_slave_tx); + dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); + if (chan) { + s->chan_tx = chan; + /* UART circular tx buffer is an aligned page. */ + s->tx_dma_addr = dma_map_single(chan->device->dev, + port->state->xmit.buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + if (dma_mapping_error(chan->device->dev, s->tx_dma_addr)) { + dev_warn(port->dev, "Failed mapping Tx DMA descriptor\n"); + dma_release_channel(chan); + s->chan_tx = NULL; + } else { + dev_dbg(port->dev, "%s: mapped %lu@%p to %pad\n", + __func__, UART_XMIT_SIZE, + port->state->xmit.buf, &s->tx_dma_addr); + } + + INIT_WORK(&s->work_tx, work_fn_tx); + } + + chan = sci_request_dma_chan(port, DMA_DEV_TO_MEM, s->cfg->dma_slave_rx); + dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); + if (chan) { + unsigned int i; + dma_addr_t dma; + void *buf; + + s->chan_rx = chan; + + s->buf_len_rx = 2 * max_t(size_t, 16, port->fifosize); + buf = dma_alloc_coherent(chan->device->dev, s->buf_len_rx * 2, + &dma, GFP_KERNEL); + if (!buf) { + dev_warn(port->dev, + "Failed to allocate Rx dma buffer, using PIO\n"); + dma_release_channel(chan); + s->chan_rx = NULL; + return; + } + + for (i = 0; i < 2; i++) { + struct scatterlist *sg = &s->sg_rx[i]; + + sg_init_table(sg, 1); + s->rx_buf[i] = buf; + sg_dma_address(sg) = dma; + sg->length = s->buf_len_rx; + + buf += s->buf_len_rx; + dma += s->buf_len_rx; + } + + setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s); + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + sci_submit_rx(s); + } +} + +static void sci_free_dma(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + + if (s->chan_tx) + sci_tx_dma_release(s, false); + if (s->chan_rx) + sci_rx_dma_release(s, false); +} +#else +static inline void sci_request_dma(struct uart_port *port) +{ +} + +static inline void sci_free_dma(struct uart_port *port) +{ +} +#endif + static irqreturn_t sci_rx_interrupt(int irq, void *ptr) { #ifdef CONFIG_SERIAL_SH_SCI_DMA @@ -940,10 +1485,12 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) scr |= SCSCR_RDRQE; } else { scr &= ~SCSCR_RIE; + sci_submit_rx(s); } serial_port_out(port, SCSCR, scr); /* Clear current interrupt */ - serial_port_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); + serial_port_out(port, SCxSR, + ssr & ~(SCIF_DR | SCxSR_RDxF(port))); dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n", jiffies, s->rx_timeout); mod_timer(&s->rx_timer, jiffies + s->rx_timeout); @@ -976,23 +1523,26 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr) static irqreturn_t sci_er_interrupt(int irq, void *ptr) { struct uart_port *port = ptr; + struct sci_port *s = to_sci_port(port); /* Handle errors */ if (port->type == PORT_SCI) { if (sci_handle_errors(port)) { /* discard character in rx buffer */ serial_port_in(port, SCxSR); - serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); } } else { sci_handle_fifo_overrun(port); - sci_rx_interrupt(irq, ptr); + if (!s->chan_rx) + sci_receive_chars(ptr); } - serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); + sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port)); /* Kick the transmission */ - sci_tx_interrupt(irq, ptr); + if (!s->chan_tx) + sci_tx_interrupt(irq, ptr); return IRQ_HANDLED; } @@ -1003,23 +1553,11 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) /* Handle BREAKs */ sci_handle_breaks(port); - serial_port_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); + sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port)); return IRQ_HANDLED; } -static inline unsigned long port_rx_irq_mask(struct uart_port *port) -{ - /* - * Not all ports (such as SCIFA) will support REIE. Rather than - * special-casing the port type, we check the port initialization - * IRQ enable mask to see whether the IRQ is desired at all. If - * it's unset, it's logically inferred that there's no point in - * testing for it. - */ - return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE); -} - static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { unsigned short ssr_status, scr_status, err_enabled, orer_status = 0; @@ -1048,11 +1586,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) * DR flags */ if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && - (scr_status & SCSCR_RIE)) { - if (port->type == PORT_SCIF || port->type == PORT_HSCIF) - sci_handle_fifo_overrun(port); + (scr_status & SCSCR_RIE)) ret = sci_rx_interrupt(irq, ptr); - } /* Error Interrupt */ if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) @@ -1063,8 +1598,10 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) ret = sci_br_interrupt(irq, ptr); /* Overrun Interrupt */ - if (orer_status & s->overrun_mask) + if (orer_status & s->overrun_mask) { sci_handle_fifo_overrun(port); + ret = IRQ_HANDLED; + } return ret; } @@ -1092,7 +1629,7 @@ static int sci_notifier(struct notifier_block *self, return NOTIFY_OK; } -static struct sci_irq_desc { +static const struct sci_irq_desc { const char *desc; irq_handler_t handler; } sci_irq_desc[] = { @@ -1134,7 +1671,7 @@ static int sci_request_irq(struct sci_port *port) int i, j, ret = 0; for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) { - struct sci_irq_desc *desc; + const struct sci_irq_desc *desc; int irq; if (SCIx_IRQ_IS_MUXED(port)) { @@ -1154,11 +1691,8 @@ static int sci_request_irq(struct sci_port *port) desc = sci_irq_desc + i; port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s", dev_name(up->dev), desc->desc); - if (!port->irqstr[j]) { - dev_err(up->dev, "Failed to allocate %s IRQ string\n", - desc->desc); + if (!port->irqstr[j]) goto out_nomem; - } ret = request_irq(irq, desc->handler, up->irqflags, port->irqstr[j], port); @@ -1232,7 +1766,7 @@ static unsigned int sci_tx_empty(struct uart_port *port) static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) { if (mctrl & TIOCM_LOOP) { - struct plat_sci_reg *reg; + const struct plat_sci_reg *reg; /* * Standard loopback mode for SCFCR ports. @@ -1254,356 +1788,10 @@ static unsigned int sci_get_mctrl(struct uart_port *port) return TIOCM_DSR | TIOCM_CAR; } -#ifdef CONFIG_SERIAL_SH_SCI_DMA -static void sci_dma_tx_complete(void *arg) -{ - struct sci_port *s = arg; - struct uart_port *port = &s->port; - struct circ_buf *xmit = &port->state->xmit; - unsigned long flags; - - dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); - - spin_lock_irqsave(&port->lock, flags); - - xmit->tail += sg_dma_len(&s->sg_tx); - xmit->tail &= UART_XMIT_SIZE - 1; - - port->icount.tx += sg_dma_len(&s->sg_tx); - - async_tx_ack(s->desc_tx); - s->desc_tx = NULL; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (!uart_circ_empty(xmit)) { - s->cookie_tx = 0; - schedule_work(&s->work_tx); - } else { - s->cookie_tx = -EINVAL; - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - u16 ctrl = serial_port_in(port, SCSCR); - serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE); - } - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* Locking: called with port lock held */ -static int sci_dma_rx_push(struct sci_port *s, size_t count) -{ - struct uart_port *port = &s->port; - struct tty_port *tport = &port->state->port; - int i, active, room; - - room = tty_buffer_request_room(tport, count); - - if (s->active_rx == s->cookie_rx[0]) { - active = 0; - } else if (s->active_rx == s->cookie_rx[1]) { - active = 1; - } else { - dev_err(port->dev, "cookie %d not found!\n", s->active_rx); - return 0; - } - - if (room < count) - dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n", - count - room); - if (!room) - return room; - - for (i = 0; i < room; i++) - tty_insert_flip_char(tport, ((u8 *)sg_virt(&s->sg_rx[active]))[i], - TTY_NORMAL); - - port->icount.rx += room; - - return room; -} - -static void sci_dma_rx_complete(void *arg) -{ - struct sci_port *s = arg; - struct uart_port *port = &s->port; - unsigned long flags; - int count; - - dev_dbg(port->dev, "%s(%d) active #%d\n", - __func__, port->line, s->active_rx); - - spin_lock_irqsave(&port->lock, flags); - - count = sci_dma_rx_push(s, s->buf_len_rx); - - mod_timer(&s->rx_timer, jiffies + s->rx_timeout); - - spin_unlock_irqrestore(&port->lock, flags); - - if (count) - tty_flip_buffer_push(&port->state->port); - - schedule_work(&s->work_rx); -} - -static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) -{ - struct dma_chan *chan = s->chan_rx; - struct uart_port *port = &s->port; - - s->chan_rx = NULL; - s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; - dma_release_channel(chan); - if (sg_dma_address(&s->sg_rx[0])) - dma_free_coherent(port->dev, s->buf_len_rx * 2, - sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0])); - if (enable_pio) - sci_start_rx(port); -} - -static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) -{ - struct dma_chan *chan = s->chan_tx; - struct uart_port *port = &s->port; - - s->chan_tx = NULL; - s->cookie_tx = -EINVAL; - dma_release_channel(chan); - if (enable_pio) - sci_start_tx(port); -} - -static void sci_submit_rx(struct sci_port *s) -{ - struct dma_chan *chan = s->chan_rx; - int i; - - for (i = 0; i < 2; i++) { - struct scatterlist *sg = &s->sg_rx[i]; - struct dma_async_tx_descriptor *desc; - - desc = dmaengine_prep_slave_sg(chan, - sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); - - if (desc) { - s->desc_rx[i] = desc; - desc->callback = sci_dma_rx_complete; - desc->callback_param = s; - s->cookie_rx[i] = desc->tx_submit(desc); - } - - if (!desc || s->cookie_rx[i] < 0) { - if (i) { - async_tx_ack(s->desc_rx[0]); - s->cookie_rx[0] = -EINVAL; - } - if (desc) { - async_tx_ack(desc); - s->cookie_rx[i] = -EINVAL; - } - dev_warn(s->port.dev, - "failed to re-start DMA, using PIO\n"); - sci_rx_dma_release(s, true); - return; - } - dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", - __func__, s->cookie_rx[i], i); - } - - s->active_rx = s->cookie_rx[0]; - - dma_async_issue_pending(chan); -} - -static void work_fn_rx(struct work_struct *work) -{ - struct sci_port *s = container_of(work, struct sci_port, work_rx); - struct uart_port *port = &s->port; - struct dma_async_tx_descriptor *desc; - int new; - - if (s->active_rx == s->cookie_rx[0]) { - new = 0; - } else if (s->active_rx == s->cookie_rx[1]) { - new = 1; - } else { - dev_err(port->dev, "cookie %d not found!\n", s->active_rx); - return; - } - desc = s->desc_rx[new]; - - if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) != - DMA_COMPLETE) { - /* Handle incomplete DMA receive */ - struct dma_chan *chan = s->chan_rx; - struct shdma_desc *sh_desc = container_of(desc, - struct shdma_desc, async_tx); - unsigned long flags; - int count; - - dmaengine_terminate_all(chan); - dev_dbg(port->dev, "Read %zu bytes with cookie %d\n", - sh_desc->partial, sh_desc->cookie); - - spin_lock_irqsave(&port->lock, flags); - count = sci_dma_rx_push(s, sh_desc->partial); - spin_unlock_irqrestore(&port->lock, flags); - - if (count) - tty_flip_buffer_push(&port->state->port); - - sci_submit_rx(s); - - return; - } - - s->cookie_rx[new] = desc->tx_submit(desc); - if (s->cookie_rx[new] < 0) { - dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); - sci_rx_dma_release(s, true); - return; - } - - s->active_rx = s->cookie_rx[!new]; - - dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", - __func__, s->cookie_rx[new], new, s->active_rx); -} - -static void work_fn_tx(struct work_struct *work) -{ - struct sci_port *s = container_of(work, struct sci_port, work_tx); - struct dma_async_tx_descriptor *desc; - struct dma_chan *chan = s->chan_tx; - struct uart_port *port = &s->port; - struct circ_buf *xmit = &port->state->xmit; - struct scatterlist *sg = &s->sg_tx; - - /* - * DMA is idle now. - * Port xmit buffer is already mapped, and it is one page... Just adjust - * offsets and lengths. Since it is a circular buffer, we have to - * transmit till the end, and then the rest. Take the port lock to get a - * consistent xmit buffer state. - */ - spin_lock_irq(&port->lock); - sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); - sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + - sg->offset; - sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), - CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); - spin_unlock_irq(&port->lock); - - BUG_ON(!sg_dma_len(sg)); - - desc = dmaengine_prep_slave_sg(chan, - sg, s->sg_len_tx, DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - /* switch to PIO */ - sci_tx_dma_release(s, true); - return; - } - - dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); - - spin_lock_irq(&port->lock); - s->desc_tx = desc; - desc->callback = sci_dma_tx_complete; - desc->callback_param = s; - spin_unlock_irq(&port->lock); - s->cookie_tx = desc->tx_submit(desc); - if (s->cookie_tx < 0) { - dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); - /* switch to PIO */ - sci_tx_dma_release(s, true); - return; - } - - dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", - __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx); - - dma_async_issue_pending(chan); -} -#endif - -static void sci_start_tx(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - unsigned short ctrl; - -#ifdef CONFIG_SERIAL_SH_SCI_DMA - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - u16 new, scr = serial_port_in(port, SCSCR); - if (s->chan_tx) - new = scr | SCSCR_TDRQE; - else - new = scr & ~SCSCR_TDRQE; - if (new != scr) - serial_port_out(port, SCSCR, new); - } - - if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && - s->cookie_tx < 0) { - s->cookie_tx = 0; - schedule_work(&s->work_tx); - } -#endif - - if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ - ctrl = serial_port_in(port, SCSCR); - serial_port_out(port, SCSCR, ctrl | SCSCR_TIE); - } -} - -static void sci_stop_tx(struct uart_port *port) -{ - unsigned short ctrl; - - /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ - ctrl = serial_port_in(port, SCSCR); - - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) - ctrl &= ~SCSCR_TDRQE; - - ctrl &= ~SCSCR_TIE; - - serial_port_out(port, SCSCR, ctrl); -} - -static void sci_start_rx(struct uart_port *port) -{ - unsigned short ctrl; - - ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port); - - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) - ctrl &= ~SCSCR_RDRQE; - - serial_port_out(port, SCSCR, ctrl); -} - -static void sci_stop_rx(struct uart_port *port) -{ - unsigned short ctrl; - - ctrl = serial_port_in(port, SCSCR); - - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) - ctrl &= ~SCSCR_RDRQE; - - ctrl &= ~port_rx_irq_mask(port); - - serial_port_out(port, SCSCR, ctrl); -} - static void sci_break_ctl(struct uart_port *port, int break_state) { struct sci_port *s = to_sci_port(port); - struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; + const struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; unsigned short scscr, scsptr; /* check wheter the port has SCSPTR */ @@ -1630,142 +1818,6 @@ static void sci_break_ctl(struct uart_port *port, int break_state) serial_port_out(port, SCSCR, scscr); } -#ifdef CONFIG_SERIAL_SH_SCI_DMA -static bool filter(struct dma_chan *chan, void *slave) -{ - struct sh_dmae_slave *param = slave; - - dev_dbg(chan->device->dev, "%s: slave ID %d\n", - __func__, param->shdma_slave.slave_id); - - chan->private = ¶m->shdma_slave; - return true; -} - -static void rx_timer_fn(unsigned long arg) -{ - struct sci_port *s = (struct sci_port *)arg; - struct uart_port *port = &s->port; - u16 scr = serial_port_in(port, SCSCR); - - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - scr &= ~SCSCR_RDRQE; - enable_irq(s->irqs[SCIx_RXI_IRQ]); - } - serial_port_out(port, SCSCR, scr | SCSCR_RIE); - dev_dbg(port->dev, "DMA Rx timed out\n"); - schedule_work(&s->work_rx); -} - -static void sci_request_dma(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - struct sh_dmae_slave *param; - struct dma_chan *chan; - dma_cap_mask_t mask; - int nent; - - dev_dbg(port->dev, "%s: port %d\n", __func__, port->line); - - if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0) - return; - - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - param = &s->param_tx; - - /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ - param->shdma_slave.slave_id = s->cfg->dma_slave_tx; - - s->cookie_tx = -EINVAL; - chan = dma_request_channel(mask, filter, param); - dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); - if (chan) { - s->chan_tx = chan; - sg_init_table(&s->sg_tx, 1); - /* UART circular tx buffer is an aligned page. */ - BUG_ON((uintptr_t)port->state->xmit.buf & ~PAGE_MASK); - sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf), - UART_XMIT_SIZE, - (uintptr_t)port->state->xmit.buf & ~PAGE_MASK); - nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE); - if (!nent) - sci_tx_dma_release(s, false); - else - dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", - __func__, - sg_dma_len(&s->sg_tx), port->state->xmit.buf, - &sg_dma_address(&s->sg_tx)); - - s->sg_len_tx = nent; - - INIT_WORK(&s->work_tx, work_fn_tx); - } - - param = &s->param_rx; - - /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ - param->shdma_slave.slave_id = s->cfg->dma_slave_rx; - - chan = dma_request_channel(mask, filter, param); - dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); - if (chan) { - dma_addr_t dma[2]; - void *buf[2]; - int i; - - s->chan_rx = chan; - - s->buf_len_rx = 2 * max(16, (int)port->fifosize); - buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2, - &dma[0], GFP_KERNEL); - - if (!buf[0]) { - dev_warn(port->dev, - "failed to allocate dma buffer, using PIO\n"); - sci_rx_dma_release(s, true); - return; - } - - buf[1] = buf[0] + s->buf_len_rx; - dma[1] = dma[0] + s->buf_len_rx; - - for (i = 0; i < 2; i++) { - struct scatterlist *sg = &s->sg_rx[i]; - - sg_init_table(sg, 1); - sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx, - (uintptr_t)buf[i] & ~PAGE_MASK); - sg_dma_address(sg) = dma[i]; - } - - INIT_WORK(&s->work_rx, work_fn_rx); - setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s); - - sci_submit_rx(s); - } -} - -static void sci_free_dma(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - - if (s->chan_tx) - sci_tx_dma_release(s, false); - if (s->chan_rx) - sci_rx_dma_release(s, false); -} -#else -static inline void sci_request_dma(struct uart_port *port) -{ -} - -static inline void sci_free_dma(struct uart_port *port) -{ -} -#endif - static int sci_startup(struct uart_port *port) { struct sci_port *s = to_sci_port(port); @@ -1800,6 +1852,14 @@ static void sci_shutdown(struct uart_port *port) sci_stop_tx(port); spin_unlock_irqrestore(&port->lock, flags); +#ifdef CONFIG_SERIAL_SH_SCI_DMA + if (s->chan_rx) { + dev_dbg(port->dev, "%s(%d) deleting rx_timer\n", __func__, + port->line); + del_timer_sync(&s->rx_timer); + } +#endif + sci_free_dma(port); sci_free_irq(s); } @@ -1892,7 +1952,7 @@ static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq, static void sci_reset(struct uart_port *port) { - struct plat_sci_reg *reg; + const struct plat_sci_reg *reg; unsigned int status; do { @@ -1910,7 +1970,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { struct sci_port *s = to_sci_port(port); - struct plat_sci_reg *reg; + const struct plat_sci_reg *reg; unsigned int baud, smr_val = 0, max_baud, cks = 0; int t = -1; unsigned int srr = 15; @@ -1951,7 +2011,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_reset(port); - smr_val |= serial_port_in(port, SCSMR) & 3; + smr_val |= serial_port_in(port, SCSMR) & SCSMR_CKS; uart_update_timeout(port, termios->c_cflag, baud); @@ -1996,13 +2056,13 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, #ifdef CONFIG_SERIAL_SH_SCI_DMA /* * Calculate delay for 2 DMA buffers (4 FIFO). - * See drivers/serial/serial_core.c::uart_update_timeout(). With 10 - * bits (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function - * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)." - * Then below we calculate 5 jiffies (20ms) for 2 DMA buffers (4 FIFO - * sizes), but when performing a faster transfer, value obtained by - * this formula is may not enough. Therefore, if value is smaller than - * 20msec, this sets 20msec as timeout of DMA. + * See serial_core.c::uart_update_timeout(). + * With 10 bits (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above + * function calculates 1 jiffie for the data plus 5 jiffies for the + * "slop(e)." Then below we calculate 5 jiffies (20ms) for 2 DMA + * buffers (4 FIFO sizes), but when performing a faster transfer, the + * value obtained by this formula is too small. Therefore, if the value + * is smaller than 20ms, use 20ms as the timeout value for DMA. */ if (s->chan_rx) { unsigned int bits; @@ -2187,7 +2247,6 @@ static int sci_init_single(struct platform_device *dev, { struct uart_port *port = &sci_port->port; const struct resource *res; - unsigned int sampling_rate; unsigned int i; int ret; @@ -2232,37 +2291,37 @@ static int sci_init_single(struct platform_device *dev, port->fifosize = 256; sci_port->overrun_reg = SCxSR; sci_port->overrun_mask = SCIFA_ORER; - sampling_rate = 16; + sci_port->sampling_rate = 16; break; case PORT_HSCIF: port->fifosize = 128; - sampling_rate = 0; sci_port->overrun_reg = SCLSR; sci_port->overrun_mask = SCLSR_ORER; + sci_port->sampling_rate = 0; break; case PORT_SCIFA: port->fifosize = 64; sci_port->overrun_reg = SCxSR; sci_port->overrun_mask = SCIFA_ORER; - sampling_rate = 16; + sci_port->sampling_rate = 16; break; case PORT_SCIF: port->fifosize = 16; if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) { sci_port->overrun_reg = SCxSR; sci_port->overrun_mask = SCIFA_ORER; - sampling_rate = 16; + sci_port->sampling_rate = 16; } else { sci_port->overrun_reg = SCLSR; sci_port->overrun_mask = SCLSR_ORER; - sampling_rate = 32; + sci_port->sampling_rate = 32; } break; default: port->fifosize = 1; sci_port->overrun_reg = SCxSR; sci_port->overrun_mask = SCI_ORER; - sampling_rate = 32; + sci_port->sampling_rate = 32; break; } @@ -2270,8 +2329,8 @@ static int sci_init_single(struct platform_device *dev, * match the SoC datasheet, this should be investigated. Let platform * data override the sampling rate for now. */ - sci_port->sampling_rate = p->sampling_rate ? p->sampling_rate - : sampling_rate; + if (p->sampling_rate) + sci_port->sampling_rate = p->sampling_rate; if (!early) { sci_port->iclk = clk_get(&dev->dev, "sci_ick"); @@ -2303,15 +2362,22 @@ static int sci_init_single(struct platform_device *dev, /* * Establish some sensible defaults for the error detection. */ - sci_port->error_mask = (p->type == PORT_SCI) ? - SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK; + if (p->type == PORT_SCI) { + sci_port->error_mask = SCI_DEFAULT_ERROR_MASK; + sci_port->error_clear = SCI_ERROR_CLEAR; + } else { + sci_port->error_mask = SCIF_DEFAULT_ERROR_MASK; + sci_port->error_clear = SCIF_ERROR_CLEAR; + } /* * Make the error mask inclusive of overrun detection, if * supported. */ - if (sci_port->overrun_reg == SCxSR) + if (sci_port->overrun_reg == SCxSR) { sci_port->error_mask |= sci_port->overrun_mask; + sci_port->error_clear &= ~sci_port->overrun_mask; + } port->type = p->type; port->flags = UPF_FIXED_PORT | p->flags; @@ -2564,10 +2630,8 @@ sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id) info = match->data; p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL); - if (!p) { - dev_err(&pdev->dev, "failed to allocate DT config data\n"); + if (!p) return NULL; - } /* Get the line number for the aliases node. */ id = of_alias_get_id(np, "serial"); diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index 3393f67b4e84..bf69bbdcc1f9 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -54,10 +54,10 @@ enum { #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) -#define SCI_RDxF_CLEAR ~(SCI_RESERVED | SCI_RDRF) -#define SCI_ERROR_CLEAR ~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER) -#define SCI_TDxE_CLEAR ~(SCI_RESERVED | SCI_TEND | SCI_TDRE) -#define SCI_BREAK_CLEAR ~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER) +#define SCI_RDxF_CLEAR (u32)(~(SCI_RESERVED | SCI_RDRF)) +#define SCI_ERROR_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)) +#define SCI_TDxE_CLEAR (u32)(~(SCI_RESERVED | SCI_TEND | SCI_TDRE)) +#define SCI_BREAK_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)) /* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */ #define SCIF_ER BIT(7) /* Receive Error */ @@ -76,10 +76,10 @@ enum { #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER) -#define SCIF_RDxF_CLEAR ~(SCIF_DR | SCIF_RDF) -#define SCIF_ERROR_CLEAR ~(SCIFA_ORER | SCIF_PER | SCIF_FER | SCIF_ER) -#define SCIF_TDxE_CLEAR ~(SCIF_TDFE) -#define SCIF_BREAK_CLEAR ~(SCIF_PER | SCIF_FER | SCIF_BRK) +#define SCIF_RDxF_CLEAR (u32)(~(SCIF_DR | SCIF_RDF)) +#define SCIF_ERROR_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_ER)) +#define SCIF_TDxE_CLEAR (u32)(~(SCIF_TDFE)) +#define SCIF_BREAK_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK)) /* SCFCR (FIFO Control Register) */ #define SCFCR_MCE BIT(3) /* Modem Control Enable */ @@ -119,28 +119,11 @@ enum { #define SCxSR_ERRORS(port) (to_sci_port(port)->error_mask) -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_R8A7740) - -# define SCxSR_RDxF_CLEAR(port) \ - (serial_port_in(port, SCxSR) & SCIF_RDxF_CLEAR) -# define SCxSR_ERROR_CLEAR(port) \ - (serial_port_in(port, SCxSR) & SCIF_ERROR_CLEAR) -# define SCxSR_TDxE_CLEAR(port) \ - (serial_port_in(port, SCxSR) & SCIF_TDxE_CLEAR) -# define SCxSR_BREAK_CLEAR(port) \ - (serial_port_in(port, SCxSR) & SCIF_BREAK_CLEAR) -#else -# define SCxSR_RDxF_CLEAR(port) \ - ((((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR) & 0xff) -# define SCxSR_ERROR_CLEAR(port) \ - ((((port)->type == PORT_SCI) ? SCI_ERROR_CLEAR : SCIF_ERROR_CLEAR) & 0xff) -# define SCxSR_TDxE_CLEAR(port) \ - ((((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR) & 0xff) -# define SCxSR_BREAK_CLEAR(port) \ - ((((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR) & 0xff) -#endif - +#define SCxSR_RDxF_CLEAR(port) \ + (((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR) +#define SCxSR_ERROR_CLEAR(port) \ + (to_sci_port(port)->error_clear) +#define SCxSR_TDxE_CLEAR(port) \ + (((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR) +#define SCxSR_BREAK_CLEAR(port) \ + (((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR) diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 3866516c2926..9dbae01d41ce 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -782,6 +782,7 @@ static const struct of_device_id serial_ids[] = { {.compatible = "sprd,sc9836-uart",}, {} }; +MODULE_DEVICE_TABLE(of, serial_ids); static struct platform_driver sprd_platform_driver = { .probe = sprd_probe, diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index d625664ce1b5..2d78cb3627ae 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -430,7 +430,7 @@ static void asc_break_ctl(struct uart_port *port, int break_state) */ static int asc_startup(struct uart_port *port) { - if (request_irq(port->irq, asc_interrupt, IRQF_NO_SUSPEND, + if (request_irq(port->irq, asc_interrupt, 0, asc_port_name(port), port)) { dev_err(port->dev, "cannot allocate irq.\n"); return -ENODEV; diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index e3de9c6d2226..f89d1f79be18 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -322,8 +322,7 @@ static int stm32_startup(struct uart_port *port) u32 val; int ret; - ret = request_irq(port->irq, stm32_interrupt, IRQF_NO_SUSPEND, - name, port); + ret = request_irq(port->irq, stm32_interrupt, 0, name, port); if (ret) return ret; diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index 2fac7123b274..6188059fd523 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -3314,12 +3314,11 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, -EAGAIN : -ERESTARTSYS; break; } - + dcd = tty_port_carrier_raised(&info->port); - - if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd)) - break; - + if (do_clocal || dcd) + break; + if (signal_pending(current)) { retval = -ERESTARTSYS; break; @@ -3398,15 +3397,6 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp) printk("%s(%d):mgsl_open(%s), old ref count = %d\n", __FILE__,__LINE__,tty->driver->name, info->port.count); - /* If port is closing, signal caller to try again */ - if (info->port.flags & ASYNC_CLOSING){ - wait_event_interruptible_tty(tty, info->port.close_wait, - !(info->port.flags & ASYNC_CLOSING)); - retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); - goto cleanup; - } - info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; spin_lock_irqsave(&info->netlock, flags); @@ -6635,7 +6625,7 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info) unsigned char *ptmp = info->intermediate_rxbuffer; if ( !(status & RXSTATUS_CRC_ERROR)) - info->icount.rxok++; + info->icount.rxok++; while(copy_count) { int partial_count; diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 0ea8eee00178..6fc39fbfc275 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -672,15 +672,6 @@ static int open(struct tty_struct *tty, struct file *filp) DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count)); - /* If port is closing, signal caller to try again */ - if (info->port.flags & ASYNC_CLOSING){ - wait_event_interruptible_tty(tty, info->port.close_wait, - !(info->port.flags & ASYNC_CLOSING)); - retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); - goto cleanup; - } - mutex_lock(&info->port.mutex); info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; @@ -3320,9 +3311,8 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } cd = tty_port_carrier_raised(port); - - if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd )) - break; + if (do_clocal || cd) + break; if (signal_pending(current)) { retval = -ERESTARTSYS; diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index 08633a8139ff..fb00a06dfa4b 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -752,15 +752,6 @@ static int open(struct tty_struct *tty, struct file *filp) printk("%s(%d):%s open(), old ref count = %d\n", __FILE__,__LINE__,tty->driver->name, info->port.count); - /* If port is closing, signal caller to try again */ - if (info->port.flags & ASYNC_CLOSING){ - wait_event_interruptible_tty(tty, info->port.close_wait, - !(info->port.flags & ASYNC_CLOSING)); - retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); - goto cleanup; - } - info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; spin_lock_irqsave(&info->netlock, flags); @@ -3341,9 +3332,8 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } cd = tty_port_carrier_raised(port); - - if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd)) - break; + if (do_clocal || cd) + break; if (signal_pending(current)) { retval = -ERESTARTSYS; diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 95b330a9ea98..5381a728d23e 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -1003,6 +1003,10 @@ static const struct kernel_param_ops param_ops_sysrq_reset_seq = { #define param_check_sysrq_reset_seq(name, p) \ __param_check(name, p, unsigned short) +/* + * not really modular, but the easiest way to keep compat with existing + * bootargs behaviour is to continue using module_param here. + */ module_param_array_named(reset_seq, sysrq_reset_seq, sysrq_reset_seq, &sysrq_reset_seq_len, 0644); @@ -1119,4 +1123,4 @@ static int __init sysrq_init(void) return 0; } -module_init(sysrq_init); +device_initcall(sysrq_init); diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 5a3fa8913880..9a479e61791a 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -242,7 +242,10 @@ void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld) atomic_inc(&buf->priority); mutex_lock(&buf->lock); - while ((next = buf->head->next) != NULL) { + /* paired w/ release in __tty_buffer_request_room; ensures there are + * no pending memory accesses to the freed buffer + */ + while ((next = smp_load_acquire(&buf->head->next)) != NULL) { tty_buffer_free(port, buf->head); buf->head = next; } @@ -290,7 +293,10 @@ static int __tty_buffer_request_room(struct tty_port *port, size_t size, if (n != NULL) { n->flags = flags; buf->tail = n; - b->commit = b->used; + /* paired w/ acquire in flush_to_ldisc(); ensures + * flush_to_ldisc() sees buffer data. + */ + smp_store_release(&b->commit, b->used); /* paired w/ acquire in flush_to_ldisc(); ensures the * latest commit value can be read before the head is * advanced to the next buffer @@ -393,8 +399,11 @@ void tty_schedule_flip(struct tty_port *port) { struct tty_bufhead *buf = &port->buf; - buf->tail->commit = buf->tail->used; - schedule_work(&buf->work); + /* paired w/ acquire in flush_to_ldisc(); ensures + * flush_to_ldisc() sees buffer data. + */ + smp_store_release(&buf->tail->commit, buf->tail->used); + queue_work(system_unbound_wq, &buf->work); } EXPORT_SYMBOL(tty_schedule_flip); @@ -467,7 +476,7 @@ static void flush_to_ldisc(struct work_struct *work) struct tty_struct *tty; struct tty_ldisc *disc; - tty = port->itty; + tty = READ_ONCE(port->itty); if (tty == NULL) return; @@ -491,7 +500,10 @@ static void flush_to_ldisc(struct work_struct *work) * is advancing to the next buffer */ next = smp_load_acquire(&head->next); - count = head->commit - head->read; + /* paired w/ release in __tty_buffer_request_room() or in + * tty_buffer_flush(); ensures we see the committed buffer data + */ + count = smp_load_acquire(&head->commit) - head->read; if (!count) { if (next == NULL) { check_other_closed(tty); @@ -575,3 +587,13 @@ void tty_buffer_set_lock_subclass(struct tty_port *port) { lockdep_set_subclass(&port->buf.lock, TTY_LOCK_SLAVE); } + +bool tty_buffer_restart_work(struct tty_port *port) +{ + return queue_work(system_unbound_wq, &port->buf.work); +} + +bool tty_buffer_cancel_work(struct tty_port *port) +{ + return cancel_work_sync(&port->buf.work); +} diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 02785d844354..0c41dbcb90b8 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -390,10 +390,10 @@ EXPORT_SYMBOL_GPL(tty_find_polling_driver); * Locking: ctrl_lock */ -int tty_check_change(struct tty_struct *tty) +int __tty_check_change(struct tty_struct *tty, int sig) { unsigned long flags; - struct pid *pgrp; + struct pid *pgrp, *tty_pgrp; int ret = 0; if (current->signal->tty != tty) @@ -403,33 +403,35 @@ int tty_check_change(struct tty_struct *tty) pgrp = task_pgrp(current); spin_lock_irqsave(&tty->ctrl_lock, flags); - - if (!tty->pgrp) { - printk(KERN_WARNING "tty_check_change: tty->pgrp == NULL!\n"); - goto out_unlock; - } - if (pgrp == tty->pgrp) - goto out_unlock; + tty_pgrp = tty->pgrp; spin_unlock_irqrestore(&tty->ctrl_lock, flags); - if (is_ignored(SIGTTOU)) - goto out_rcuunlock; - if (is_current_pgrp_orphaned()) { - ret = -EIO; - goto out_rcuunlock; + if (tty_pgrp && pgrp != tty->pgrp) { + if (is_ignored(sig)) { + if (sig == SIGTTIN) + ret = -EIO; + } else if (is_current_pgrp_orphaned()) + ret = -EIO; + else { + kill_pgrp(pgrp, sig, 1); + set_thread_flag(TIF_SIGPENDING); + ret = -ERESTARTSYS; + } } - kill_pgrp(pgrp, SIGTTOU, 1); - rcu_read_unlock(); - set_thread_flag(TIF_SIGPENDING); - ret = -ERESTARTSYS; - return ret; -out_unlock: - spin_unlock_irqrestore(&tty->ctrl_lock, flags); -out_rcuunlock: rcu_read_unlock(); + + if (!tty_pgrp) { + pr_warn("%s: tty_check_change: sig=%d, tty->pgrp == NULL!\n", + tty_name(tty), sig); + } + return ret; } +int tty_check_change(struct tty_struct *tty) +{ + return __tty_check_change(tty, SIGTTOU); +} EXPORT_SYMBOL(tty_check_change); static ssize_t hung_up_tty_read(struct file *file, char __user *buf, @@ -1198,11 +1200,9 @@ void tty_write_message(struct tty_struct *tty, char *msg) if (tty) { mutex_lock(&tty->atomic_write_lock); tty_lock(tty); - if (tty->ops->write && tty->count > 0) { - tty_unlock(tty); + if (tty->ops->write && tty->count > 0) tty->ops->write(tty, msg, strlen(msg)); - } else - tty_unlock(tty); + tty_unlock(tty); tty_write_unlock(tty); } return; @@ -1689,7 +1689,7 @@ static void release_tty(struct tty_struct *tty, int idx) tty->port->itty = NULL; if (tty->link) tty->link->port->itty = NULL; - cancel_work_sync(&tty->port->buf.work); + tty_buffer_cancel_work(tty->port); tty_kref_put(tty->link); tty_kref_put(tty); @@ -2128,8 +2128,24 @@ retry_open: if (!noctty && current->signal->leader && !current->signal->tty && - tty->session == NULL) - __proc_set_tty(tty); + tty->session == NULL) { + /* + * Don't let a process that only has write access to the tty + * obtain the privileges associated with having a tty as + * controlling terminal (being able to reopen it with full + * access through /dev/tty, being able to perform pushback). + * Many distributions set the group of all ttys to "tty" and + * grant write-only access to all terminals for setgid tty + * binaries, which should not imply full privileges on all ttys. + * + * This could theoretically break old code that performs open() + * on a write-only file descriptor. In that case, it might be + * necessary to also permit this if + * inode_permission(inode, MAY_READ) == 0. + */ + if (filp->f_mode & FMODE_READ) + __proc_set_tty(tty); + } spin_unlock_irq(¤t->sighand->siglock); read_unlock(&tasklist_lock); tty_unlock(tty); @@ -2418,7 +2434,7 @@ static int fionbio(struct file *file, int __user *p) * Takes ->siglock() when updating signal->tty */ -static int tiocsctty(struct tty_struct *tty, int arg) +static int tiocsctty(struct tty_struct *tty, struct file *file, int arg) { int ret = 0; @@ -2452,6 +2468,13 @@ static int tiocsctty(struct tty_struct *tty, int arg) goto unlock; } } + + /* See the comment in tty_open(). */ + if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) { + ret = -EPERM; + goto unlock; + } + proc_set_tty(tty); unlock: read_unlock(&tasklist_lock); @@ -2546,7 +2569,6 @@ static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t struct pid *pgrp; pid_t pgrp_nr; int retval = tty_check_change(real_tty); - unsigned long flags; if (retval == -EIO) return -ENOTTY; @@ -2569,10 +2591,10 @@ static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t if (session_of_pgrp(pgrp) != task_session(current)) goto out_unlock; retval = 0; - spin_lock_irqsave(&tty->ctrl_lock, flags); + spin_lock_irq(&tty->ctrl_lock); put_pid(real_tty->pgrp); real_tty->pgrp = get_pid(pgrp); - spin_unlock_irqrestore(&tty->ctrl_lock, flags); + spin_unlock_irq(&tty->ctrl_lock); out_unlock: rcu_read_unlock(); return retval; @@ -2844,7 +2866,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) no_tty(); return 0; case TIOCSCTTY: - return tiocsctty(tty, arg); + return tiocsctty(tty, file, arg); case TIOCGPGRP: return tiocgpgrp(tty, real_tty, p); case TIOCSPGRP: @@ -3151,13 +3173,18 @@ struct class *tty_class; static int tty_cdev_add(struct tty_driver *driver, dev_t dev, unsigned int index, unsigned int count) { + int err; + /* init here, since reused cdevs cause crashes */ driver->cdevs[index] = cdev_alloc(); if (!driver->cdevs[index]) return -ENOMEM; - cdev_init(driver->cdevs[index], &tty_fops); + driver->cdevs[index]->ops = &tty_fops; driver->cdevs[index]->owner = driver->owner; - return cdev_add(driver->cdevs[index], dev, count); + err = cdev_add(driver->cdevs[index], dev, count); + if (err) + kobject_put(&driver->cdevs[index]->kobj); + return err; } /** diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 71750cbac31f..5af8f1874c1a 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -319,7 +319,7 @@ __tty_ldisc_lock_nested(struct tty_struct *tty, unsigned long timeout) static inline void __tty_ldisc_unlock(struct tty_struct *tty) { - return ldsem_up_write(&tty->ldisc_sem); + ldsem_up_write(&tty->ldisc_sem); } static int __lockfunc diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 40b31835f80b..482f33f20043 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -22,7 +22,6 @@ void tty_port_init(struct tty_port *port) memset(port, 0, sizeof(*port)); tty_buffer_init(port); init_waitqueue_head(&port->open_wait); - init_waitqueue_head(&port->close_wait); init_waitqueue_head(&port->delta_msr_wait); mutex_init(&port->mutex); mutex_init(&port->buf_mutex); @@ -131,7 +130,7 @@ EXPORT_SYMBOL(tty_port_free_xmit_buf); */ void tty_port_destroy(struct tty_port *port) { - cancel_work_sync(&port->buf.work); + tty_buffer_cancel_work(port); tty_buffer_free_all(port); } EXPORT_SYMBOL(tty_port_destroy); @@ -363,16 +362,6 @@ int tty_port_block_til_ready(struct tty_port *port, unsigned long flags; DEFINE_WAIT(wait); - /* block if port is in the process of being closed */ - if (port->flags & ASYNC_CLOSING) { - wait_event_interruptible_tty(tty, port->close_wait, - !(port->flags & ASYNC_CLOSING)); - if (port->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - /* if non-blocking mode is set we can pass directly to open unless the port has just hung up or is in another error state */ if (tty->flags & (1 << TTY_IO_ERROR)) { @@ -423,8 +412,7 @@ int tty_port_block_til_ready(struct tty_port *port, * Never ask drivers if CLOCAL is set, this causes troubles * on some hardware. */ - if (!(port->flags & ASYNC_CLOSING) && - (do_clocal || tty_port_carrier_raised(port))) + if (do_clocal || tty_port_carrier_raised(port)) break; if (signal_pending(current)) { retval = -ERESTARTSYS; @@ -463,10 +451,7 @@ static void tty_port_drain_delay(struct tty_port *port, struct tty_struct *tty) schedule_timeout_interruptible(timeout); } -/* Caller holds tty lock. - * NB: may drop and reacquire tty lock (in tty_wait_until_sent_from_close()) - * so tty and tty port may have changed state (but not hung up or reopened). - */ +/* Caller holds tty lock. */ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct file *filp) { @@ -502,7 +487,7 @@ int tty_port_close_start(struct tty_port *port, if (tty->flow_stopped) tty_driver_flush_buffer(tty); if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent_from_close(tty, port->closing_wait); + tty_wait_until_sent(tty, port->closing_wait); if (port->drain_delay) tty_port_drain_delay(port, tty); } @@ -534,7 +519,6 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) wake_up_interruptible(&port->open_wait); } port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); - wake_up_interruptible(&port->close_wait); spin_unlock_irqrestore(&port->lock, flags); } EXPORT_SYMBOL(tty_port_close_end); @@ -543,10 +527,6 @@ EXPORT_SYMBOL(tty_port_close_end); * tty_port_close * * Caller holds tty lock - * - * NB: may drop and reacquire tty lock (in tty_port_close_start()-> - * tty_wait_until_sent_from_close()) so tty and tty_port may have changed - * state (but not hung up or reopened). */ void tty_port_close(struct tty_port *port, struct tty_struct *tty, struct file *filp) |