diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/pty.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/imx.c | 38 | ||||
| -rw-r--r-- | drivers/tty/serial/lantiq.c | 83 | ||||
| -rw-r--r-- | drivers/tty/serial/sb1250-duart.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/zs.c | 1 | ||||
| -rw-r--r-- | drivers/tty/tty_ldisc.c | 41 |
6 files changed, 101 insertions, 65 deletions
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 59af3945ea85..65c7c62c7aae 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -633,7 +633,6 @@ static int ptmx_open(struct inode *inode, struct file *filp) mutex_unlock(&devpts_mutex); mutex_lock(&tty_mutex); - mutex_lock(&devpts_mutex); tty = tty_init_dev(ptm_driver, index); if (IS_ERR(tty)) { @@ -643,7 +642,6 @@ static int ptmx_open(struct inode *inode, struct file *filp) /* The tty returned here is locked so we can safely drop the mutex */ - mutex_unlock(&devpts_mutex); mutex_unlock(&tty_mutex); set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */ diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index ec206732f68c..4ef747307ecb 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -205,7 +205,8 @@ struct imx_port { unsigned int irda_inv_rx:1; unsigned int irda_inv_tx:1; unsigned short trcv_delay; /* transceiver delay */ - struct clk *clk; + struct clk *clk_ipg; + struct clk *clk_per; struct imx_uart_data *devdata; }; @@ -673,7 +674,7 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) * RFDIV is set such way to satisfy requested uartclk value */ val = TXTL << 10 | RXTL; - ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2) + ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2) / sport->port.uartclk; if(!ufcr_rfdiv) @@ -1286,7 +1287,7 @@ imx_console_get_options(struct imx_port *sport, int *baud, else ucfr_rfdiv = 6 - ucfr_rfdiv; - uartclk = clk_get_rate(sport->clk); + uartclk = clk_get_rate(sport->clk_per); uartclk /= ucfr_rfdiv; { /* @@ -1511,14 +1512,22 @@ static int serial_imx_probe(struct platform_device *pdev) goto unmap; } - sport->clk = clk_get(&pdev->dev, "uart"); - if (IS_ERR(sport->clk)) { - ret = PTR_ERR(sport->clk); + sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(sport->clk_ipg)) { + ret = PTR_ERR(sport->clk_ipg); goto unmap; } - clk_prepare_enable(sport->clk); - sport->port.uartclk = clk_get_rate(sport->clk); + sport->clk_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(sport->clk_per)) { + ret = PTR_ERR(sport->clk_per); + goto unmap; + } + + clk_prepare_enable(sport->clk_per); + clk_prepare_enable(sport->clk_ipg); + + sport->port.uartclk = clk_get_rate(sport->clk_per); imx_ports[sport->port.line] = sport; @@ -1539,8 +1548,8 @@ deinit: if (pdata && pdata->exit) pdata->exit(pdev); clkput: - clk_disable_unprepare(sport->clk); - clk_put(sport->clk); + clk_disable_unprepare(sport->clk_per); + clk_disable_unprepare(sport->clk_ipg); unmap: iounmap(sport->port.membase); free: @@ -1558,11 +1567,10 @@ static int serial_imx_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); - if (sport) { - uart_remove_one_port(&imx_reg, &sport->port); - clk_disable_unprepare(sport->clk); - clk_put(sport->clk); - } + uart_remove_one_port(&imx_reg, &sport->port); + + clk_disable_unprepare(sport->clk_per); + clk_disable_unprepare(sport->clk_ipg); if (pdata && pdata->exit) pdata->exit(pdev); diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index 96c1cacc7360..02da071fe1e7 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -31,16 +31,19 @@ #include <linux/tty_flip.h> #include <linux/serial_core.h> #include <linux/serial.h> -#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/gpio.h> #include <lantiq_soc.h> #define PORT_LTQ_ASC 111 #define MAXPORTS 2 #define UART_DUMMY_UER_RX 1 -#define DRVNAME "ltq_asc" +#define DRVNAME "lantiq,asc" #ifdef __BIG_ENDIAN #define LTQ_ASC_TBUF (0x0020 + 3) #define LTQ_ASC_RBUF (0x0024 + 3) @@ -114,6 +117,9 @@ static DEFINE_SPINLOCK(ltq_asc_lock); struct ltq_uart_port { struct uart_port port; + /* clock used to derive divider */ + struct clk *fpiclk; + /* clock gating of the ASC core */ struct clk *clk; unsigned int tx_irq; unsigned int rx_irq; @@ -316,7 +322,9 @@ lqasc_startup(struct uart_port *port) struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); int retval; - port->uartclk = clk_get_rate(ltq_port->clk); + if (ltq_port->clk) + clk_enable(ltq_port->clk); + port->uartclk = clk_get_rate(ltq_port->fpiclk); ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET), port->membase + LTQ_ASC_CLC); @@ -382,6 +390,8 @@ lqasc_shutdown(struct uart_port *port) port->membase + LTQ_ASC_RXFCON); ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU, port->membase + LTQ_ASC_TXFCON); + if (ltq_port->clk) + clk_disable(ltq_port->clk); } static void @@ -630,7 +640,7 @@ lqasc_console_setup(struct console *co, char *options) port = <q_port->port; - port->uartclk = clk_get_rate(ltq_port->clk); + port->uartclk = clk_get_rate(ltq_port->fpiclk); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -668,37 +678,32 @@ static struct uart_driver lqasc_reg = { static int __init lqasc_probe(struct platform_device *pdev) { + struct device_node *node = pdev->dev.of_node; struct ltq_uart_port *ltq_port; struct uart_port *port; - struct resource *mmres, *irqres; - int tx_irq, rx_irq, err_irq; - struct clk *clk; + struct resource *mmres, irqres[3]; + int line = 0; int ret; mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!mmres || !irqres) + ret = of_irq_to_resource_table(node, irqres, 3); + if (!mmres || (ret != 3)) { + dev_err(&pdev->dev, + "failed to get memory/irq for serial port\n"); return -ENODEV; + } - if (pdev->id >= MAXPORTS) - return -EBUSY; + /* check if this is the console port */ + if (mmres->start != CPHYSADDR(LTQ_EARLY_ASC)) + line = 1; - if (lqasc_port[pdev->id] != NULL) + if (lqasc_port[line]) { + dev_err(&pdev->dev, "port %d already allocated\n", line); return -EBUSY; - - clk = clk_get(&pdev->dev, "fpi"); - if (IS_ERR(clk)) { - pr_err("failed to get fpi clk\n"); - return -ENOENT; } - tx_irq = platform_get_irq_byname(pdev, "tx"); - rx_irq = platform_get_irq_byname(pdev, "rx"); - err_irq = platform_get_irq_byname(pdev, "err"); - if ((tx_irq < 0) | (rx_irq < 0) | (err_irq < 0)) - return -ENODEV; - - ltq_port = kzalloc(sizeof(struct ltq_uart_port), GFP_KERNEL); + ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port), + GFP_KERNEL); if (!ltq_port) return -ENOMEM; @@ -709,19 +714,26 @@ lqasc_probe(struct platform_device *pdev) port->ops = &lqasc_pops; port->fifosize = 16; port->type = PORT_LTQ_ASC, - port->line = pdev->id; + port->line = line; port->dev = &pdev->dev; - - port->irq = tx_irq; /* unused, just to be backward-compatibe */ + /* unused, just to be backward-compatible */ + port->irq = irqres[0].start; port->mapbase = mmres->start; - ltq_port->clk = clk; + ltq_port->fpiclk = clk_get_fpi(); + if (IS_ERR(ltq_port->fpiclk)) { + pr_err("failed to get fpi clk\n"); + return -ENOENT; + } - ltq_port->tx_irq = tx_irq; - ltq_port->rx_irq = rx_irq; - ltq_port->err_irq = err_irq; + /* not all asc ports have clock gates, lets ignore the return code */ + ltq_port->clk = clk_get(&pdev->dev, NULL); - lqasc_port[pdev->id] = ltq_port; + ltq_port->tx_irq = irqres[0].start; + ltq_port->rx_irq = irqres[1].start; + ltq_port->err_irq = irqres[2].start; + + lqasc_port[line] = ltq_port; platform_set_drvdata(pdev, ltq_port); ret = uart_add_one_port(&lqasc_reg, port); @@ -729,10 +741,17 @@ lqasc_probe(struct platform_device *pdev) return ret; } +static const struct of_device_id ltq_asc_match[] = { + { .compatible = DRVNAME }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_asc_match); + static struct platform_driver lqasc_driver = { .driver = { .name = DRVNAME, .owner = THIS_MODULE, + .of_match_table = ltq_asc_match, }, }; diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c index 0be8a2f00d0b..f76b1688c5c8 100644 --- a/drivers/tty/serial/sb1250-duart.c +++ b/drivers/tty/serial/sb1250-duart.c @@ -31,6 +31,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/major.h> #include <linux/serial.h> #include <linux/serial_core.h> diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c index 4001eee6c08d..92c00b24d0df 100644 --- a/drivers/tty/serial/zs.c +++ b/drivers/tty/serial/zs.c @@ -57,6 +57,7 @@ #include <linux/ioport.h> #include <linux/irqflags.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/major.h> #include <linux/serial.h> #include <linux/serial_core.h> diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 173a9000a6cb..ba8be396a621 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -894,6 +894,23 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) tty_ldisc_enable(tty); return 0; } + +static void tty_ldisc_kill(struct tty_struct *tty) +{ + mutex_lock(&tty->ldisc_mutex); + /* + * Now kill off the ldisc + */ + tty_ldisc_close(tty, tty->ldisc); + tty_ldisc_put(tty->ldisc); + /* Force an oops if we mess this up */ + tty->ldisc = NULL; + + /* Ensure the next open requests the N_TTY ldisc */ + tty_set_termios_ldisc(tty, N_TTY); + mutex_unlock(&tty->ldisc_mutex); +} + /** * tty_ldisc_release - release line discipline * @tty: tty being shut down @@ -912,27 +929,19 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) * race with the set_ldisc code path. */ - tty_unlock(tty); + tty_unlock_pair(tty, o_tty); tty_ldisc_halt(tty); tty_ldisc_flush_works(tty); - tty_lock(tty); - - mutex_lock(&tty->ldisc_mutex); - /* - * Now kill off the ldisc - */ - tty_ldisc_close(tty, tty->ldisc); - tty_ldisc_put(tty->ldisc); - /* Force an oops if we mess this up */ - tty->ldisc = NULL; + if (o_tty) { + tty_ldisc_halt(o_tty); + tty_ldisc_flush_works(o_tty); + } + tty_lock_pair(tty, o_tty); - /* Ensure the next open requests the N_TTY ldisc */ - tty_set_termios_ldisc(tty, N_TTY); - mutex_unlock(&tty->ldisc_mutex); - /* This will need doing differently if we need to lock */ + tty_ldisc_kill(tty); if (o_tty) - tty_ldisc_release(o_tty, NULL); + tty_ldisc_kill(o_tty); /* And the memory resources remaining (buffers, termios) will be disposed of when the kref hits zero */ |