summaryrefslogtreecommitdiffstats
path: root/drivers/usb/dwc3
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r--drivers/usb/dwc3/Kconfig5
-rw-r--r--drivers/usb/dwc3/Makefile6
-rw-r--r--drivers/usb/dwc3/core.c209
-rw-r--r--drivers/usb/dwc3/core.h62
-rw-r--r--drivers/usb/dwc3/debugfs.c99
-rw-r--r--drivers/usb/dwc3/dwc3-omap.c43
-rw-r--r--drivers/usb/dwc3/dwc3-pci.c51
-rw-r--r--drivers/usb/dwc3/ep0.c160
-rw-r--r--drivers/usb/dwc3/gadget.c440
-rw-r--r--drivers/usb/dwc3/gadget.h29
-rw-r--r--drivers/usb/dwc3/host.c102
-rw-r--r--drivers/usb/dwc3/io.h2
12 files changed, 874 insertions, 334 deletions
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 3c1d67d324fd..d8f741f9e56e 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -1,7 +1,10 @@
config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
- depends on (USB || USB_GADGET)
+ depends on (USB && USB_GADGET)
select USB_OTG_UTILS
+ select USB_GADGET_DUALSPEED
+ select USB_GADGET_SUPERSPEED
+ select USB_XHCI_PLATFORM
help
Say Y or M here if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 593d1dbc465b..900ae74357f1 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -4,10 +4,8 @@ ccflags-$(CONFIG_USB_DWC3_VERBOSE) += -DVERBOSE_DEBUG
obj-$(CONFIG_USB_DWC3) += dwc3.o
dwc3-y := core.o
-
-ifneq ($(CONFIG_USB_GADGET_DWC3),)
- dwc3-y += gadget.o ep0.o
-endif
+dwc3-y += host.o
+dwc3-y += gadget.o ep0.o
ifneq ($(CONFIG_DEBUG_FS),)
dwc3-y += debugfs.o
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 600d82348511..7c9df630dbe4 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -59,6 +59,60 @@
#include "debug.h"
+static char *maximum_speed = "super";
+module_param(maximum_speed, charp, 0);
+MODULE_PARM_DESC(maximum_speed, "Maximum supported speed.");
+
+/* -------------------------------------------------------------------------- */
+
+#define DWC3_DEVS_POSSIBLE 32
+
+static DECLARE_BITMAP(dwc3_devs, DWC3_DEVS_POSSIBLE);
+
+int dwc3_get_device_id(void)
+{
+ int id;
+
+again:
+ id = find_first_zero_bit(dwc3_devs, DWC3_DEVS_POSSIBLE);
+ if (id < DWC3_DEVS_POSSIBLE) {
+ int old;
+
+ old = test_and_set_bit(id, dwc3_devs);
+ if (old)
+ goto again;
+ } else {
+ pr_err("dwc3: no space for new device\n");
+ id = -ENOMEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dwc3_get_device_id);
+
+void dwc3_put_device_id(int id)
+{
+ int ret;
+
+ if (id < 0)
+ return;
+
+ ret = test_bit(id, dwc3_devs);
+ WARN(!ret, "dwc3: ID %d not in use\n", id);
+ clear_bit(id, dwc3_devs);
+}
+EXPORT_SYMBOL_GPL(dwc3_put_device_id);
+
+void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
+{
+ u32 reg;
+
+ reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+ reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
+ reg |= DWC3_GCTL_PRTCAPDIR(mode);
+ dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
/**
* dwc3_core_soft_reset - Issues core soft reset and PHY reset
* @dwc: pointer to our context structure
@@ -150,7 +204,7 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
struct dwc3_event_buffer *evt;
int i;
- for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) {
+ for (i = 0; i < dwc->num_event_buffers; i++) {
evt = dwc->ev_buffs[i];
if (evt) {
dwc3_free_one_event_buffer(dwc, evt);
@@ -162,17 +216,25 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
/**
* dwc3_alloc_event_buffers - Allocates @num event buffers of size @length
* @dwc: Pointer to out controller context structure
- * @num: number of event buffers to allocate
* @length: size of event buffer
*
* Returns 0 on success otherwise negative errno. In error the case, dwc
* may contain some buffers allocated but not all which were requested.
*/
-static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned num,
- unsigned length)
+static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
{
+ int num;
int i;
+ num = DWC3_NUM_INT(dwc->hwparams.hwparams1);
+ dwc->num_event_buffers = num;
+
+ dwc->ev_buffs = kzalloc(sizeof(*dwc->ev_buffs) * num, GFP_KERNEL);
+ if (!dwc->ev_buffs) {
+ dev_err(dwc->dev, "can't allocate event buffers array\n");
+ return -ENOMEM;
+ }
+
for (i = 0; i < num; i++) {
struct dwc3_event_buffer *evt;
@@ -198,7 +260,7 @@ static int __devinit dwc3_event_buffers_setup(struct dwc3 *dwc)
struct dwc3_event_buffer *evt;
int n;
- for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) {
+ for (n = 0; n < dwc->num_event_buffers; n++) {
evt = dwc->ev_buffs[n];
dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n",
evt->buf, (unsigned long long) evt->dma,
@@ -221,7 +283,7 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
struct dwc3_event_buffer *evt;
int n;
- for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) {
+ for (n = 0; n < dwc->num_event_buffers; n++) {
evt = dwc->ev_buffs[n];
dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0);
dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0);
@@ -285,8 +347,32 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
cpu_relax();
} while (true);
- ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_NUM,
- DWC3_EVENT_BUFFERS_SIZE);
+ dwc3_cache_hwparams(dwc);
+
+ reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+ reg &= ~DWC3_GCTL_SCALEDOWN(3);
+ reg &= ~DWC3_GCTL_DISSCRAMBLE;
+
+ switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
+ case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
+ reg &= ~DWC3_GCTL_DSBLCLKGTNG;
+ break;
+ default:
+ dev_dbg(dwc->dev, "No power optimization available\n");
+ }
+
+ /*
+ * WORKAROUND: DWC3 revisions <1.90a have a bug
+ * when The device fails to connect at SuperSpeed
+ * and falls back to high-speed mode which causes
+ * the device to enter in a Connect/Disconnect loop
+ */
+ if (dwc->revision < DWC3_REVISION_190A)
+ reg |= DWC3_GCTL_U2RSTECN;
+
+ dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+ ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
if (ret) {
dev_err(dwc->dev, "failed to allocate event buffers\n");
ret = -ENOMEM;
@@ -299,8 +385,6 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
goto err1;
}
- dwc3_cache_hwparams(dwc);
-
return 0;
err1:
@@ -320,15 +404,17 @@ static void dwc3_core_exit(struct dwc3 *dwc)
static int __devinit dwc3_probe(struct platform_device *pdev)
{
- const struct platform_device_id *id = platform_get_device_id(pdev);
struct resource *res;
struct dwc3 *dwc;
- void __iomem *regs;
- unsigned int features = id->driver_data;
+
int ret = -ENOMEM;
int irq;
+
+ void __iomem *regs;
void *mem;
+ u8 mode;
+
mem = kzalloc(sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
if (!mem) {
dev_err(&pdev->dev, "not enough memory\n");
@@ -343,6 +429,8 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
goto err1;
}
+ dwc->res = res;
+
res = request_mem_region(res->start, resource_size(res),
dev_name(&pdev->dev));
if (!res) {
@@ -370,6 +458,17 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
dwc->dev = &pdev->dev;
dwc->irq = irq;
+ if (!strncmp("super", maximum_speed, 5))
+ dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
+ else if (!strncmp("high", maximum_speed, 4))
+ dwc->maximum_speed = DWC3_DCFG_HIGHSPEED;
+ else if (!strncmp("full", maximum_speed, 4))
+ dwc->maximum_speed = DWC3_DCFG_FULLSPEED1;
+ else if (!strncmp("low", maximum_speed, 3))
+ dwc->maximum_speed = DWC3_DCFG_LOWSPEED;
+ else
+ dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
+
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
pm_runtime_forbid(&pdev->dev);
@@ -380,13 +479,44 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
goto err3;
}
- if (features & DWC3_HAS_PERIPHERAL) {
+ mode = DWC3_MODE(dwc->hwparams.hwparams0);
+
+ switch (mode) {
+ case DWC3_MODE_DEVICE:
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret) {
- dev_err(&pdev->dev, "failed to initialized gadget\n");
+ dev_err(&pdev->dev, "failed to initialize gadget\n");
goto err4;
}
+ break;
+ case DWC3_MODE_HOST:
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
+ ret = dwc3_host_init(dwc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize host\n");
+ goto err4;
+ }
+ break;
+ case DWC3_MODE_DRD:
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
+ ret = dwc3_host_init(dwc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize host\n");
+ goto err4;
+ }
+
+ ret = dwc3_gadget_init(dwc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize gadget\n");
+ goto err4;
+ }
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported mode of operation %d\n", mode);
+ goto err4;
}
+ dwc->mode = mode;
ret = dwc3_debugfs_init(dwc);
if (ret) {
@@ -399,8 +529,21 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
return 0;
err5:
- if (features & DWC3_HAS_PERIPHERAL)
+ switch (mode) {
+ case DWC3_MODE_DEVICE:
+ dwc3_gadget_exit(dwc);
+ break;
+ case DWC3_MODE_HOST:
+ dwc3_host_exit(dwc);
+ break;
+ case DWC3_MODE_DRD:
+ dwc3_host_exit(dwc);
dwc3_gadget_exit(dwc);
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
err4:
dwc3_core_exit(dwc);
@@ -420,10 +563,8 @@ err0:
static int __devexit dwc3_remove(struct platform_device *pdev)
{
- const struct platform_device_id *id = platform_get_device_id(pdev);
struct dwc3 *dwc = platform_get_drvdata(pdev);
struct resource *res;
- unsigned int features = id->driver_data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -432,8 +573,21 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
dwc3_debugfs_exit(dwc);
- if (features & DWC3_HAS_PERIPHERAL)
+ switch (dwc->mode) {
+ case DWC3_MODE_DEVICE:
+ dwc3_gadget_exit(dwc);
+ break;
+ case DWC3_MODE_HOST:
+ dwc3_host_exit(dwc);
+ break;
+ case DWC3_MODE_DRD:
+ dwc3_host_exit(dwc);
dwc3_gadget_exit(dwc);
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
dwc3_core_exit(dwc);
release_mem_region(res->start, resource_size(res));
@@ -443,30 +597,15 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
return 0;
}
-static const struct platform_device_id dwc3_id_table[] __devinitconst = {
- {
- .name = "dwc3-omap",
- .driver_data = (DWC3_HAS_PERIPHERAL
- | DWC3_HAS_XHCI
- | DWC3_HAS_OTG),
- },
- {
- .name = "dwc3-pci",
- .driver_data = DWC3_HAS_PERIPHERAL,
- },
- { }, /* Terminating Entry */
-};
-MODULE_DEVICE_TABLE(platform, dwc3_id_table);
-
static struct platform_driver dwc3_driver = {
.probe = dwc3_probe,
.remove = __devexit_p(dwc3_remove),
.driver = {
.name = "dwc3",
},
- .id_table = dwc3_id_table,
};
+MODULE_ALIAS("platform:dwc3");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 29a8e1679e12..9e57f8e9bf17 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -41,6 +41,7 @@
#include <linux/device.h>
#include <linux/spinlock.h>
+#include <linux/ioport.h>
#include <linux/list.h>
#include <linux/dma-mapping.h>
#include <linux/mm.h>
@@ -52,7 +53,6 @@
/* Global constants */
#define DWC3_ENDPOINTS_NUM 32
-#define DWC3_EVENT_BUFFERS_NUM 2
#define DWC3_EVENT_BUFFERS_SIZE PAGE_SIZE
#define DWC3_EVENT_TYPE_MASK 0xfe
@@ -153,6 +153,7 @@
#define DWC3_GCTL_CLK_PIPEHALF (2)
#define DWC3_GCTL_CLK_MASK (3)
+#define DWC3_GCTL_PRTCAP(n) (((n) & (3 << 12)) >> 12)
#define DWC3_GCTL_PRTCAPDIR(n) (n << 12)
#define DWC3_GCTL_PRTCAP_HOST 1
#define DWC3_GCTL_PRTCAP_DEVICE 2
@@ -347,6 +348,7 @@ struct dwc3_ep {
u32 free_slot;
u32 busy_slot;
const struct usb_endpoint_descriptor *desc;
+ const struct usb_ss_ep_comp_descriptor *comp_desc;
struct dwc3 *dwc;
unsigned flags;
@@ -536,6 +538,31 @@ struct dwc3_hwparams {
u32 hwparams8;
};
+/* HWPARAMS0 */
+#define DWC3_MODE(n) ((n) & 0x7)
+
+#define DWC3_MODE_DEVICE 0
+#define DWC3_MODE_HOST 1
+#define DWC3_MODE_DRD 2
+#define DWC3_MODE_HUB 3
+
+/* HWPARAMS1 */
+#define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15)
+
+struct dwc3_request {
+ struct usb_request request;
+ struct list_head list;
+ struct dwc3_ep *dep;
+
+ u8 epnum;
+ struct dwc3_trb_hw *trb;
+ dma_addr_t trb_dma;
+
+ unsigned direction:1;
+ unsigned mapped:1;
+ unsigned queued:1;
+};
+
/**
* struct dwc3 - representation of our controller
* @ctrl_req: usb control request which is used for ep0
@@ -549,19 +576,24 @@ struct dwc3_hwparams {
* @ep0_bounce_addr: dma address of ep0_bounce
* @lock: for synchronizing
* @dev: pointer to our struct device
+ * @xhci: pointer to our xHCI child
* @event_buffer_list: a list of event buffers
* @gadget: device side representation of the peripheral controller
* @gadget_driver: pointer to the gadget driver
* @regs: base address for our registers
* @regs_size: address space size
* @irq: IRQ number
+ * @num_event_buffers: calculated number of event buffers
+ * @u1u2: only used on revisions <1.83a for workaround
+ * @maximum_speed: maximum speed requested (mainly for testing purposes)
* @revision: revision register contents
+ * @mode: mode of operation
* @is_selfpowered: true when we are selfpowered
* @three_stage_setup: set if we perform a three phase setup
- * @ep0_status_pending: ep0 status response without a req is pending
* @ep0_bounced: true when we used bounce buffer
* @ep0_expect_in: true when we expect a DATA IN transfer
* @start_config_issued: true when StartConfig command has been issued
+ * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
* @ep0_next_event: hold the next expected event
* @ep0state: state of endpoint zero
* @link_state: link state
@@ -579,12 +611,15 @@ struct dwc3 {
dma_addr_t ep0_trb_addr;
dma_addr_t setup_buf_addr;
dma_addr_t ep0_bounce_addr;
- struct usb_request ep0_usb_req;
+ struct dwc3_request ep0_usb_req;
/* device lock */
spinlock_t lock;
struct device *dev;
- struct dwc3_event_buffer *ev_buffs[DWC3_EVENT_BUFFERS_NUM];
+ struct platform_device *xhci;
+ struct resource *res;
+
+ struct dwc3_event_buffer **ev_buffs;
struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
struct usb_gadget gadget;
@@ -595,7 +630,11 @@ struct dwc3 {
int irq;
+ u32 num_event_buffers;
+ u32 u1u2;
+ u32 maximum_speed;
u32 revision;
+ u32 mode;
#define DWC3_REVISION_173A 0x5533173a
#define DWC3_REVISION_175A 0x5533175a
@@ -607,10 +646,11 @@ struct dwc3 {
unsigned is_selfpowered:1;
unsigned three_stage_setup:1;
- unsigned ep0_status_pending:1;
unsigned ep0_bounced:1;
unsigned ep0_expect_in:1;
unsigned start_config_issued:1;
+ unsigned setup_packet_pending:1;
+ unsigned delayed_status:1;
enum dwc3_ep0_next ep0_next_event;
enum dwc3_ep0_state ep0state;
@@ -765,4 +805,16 @@ union dwc3_event {
#define DWC3_HAS_XHCI BIT(1)
#define DWC3_HAS_OTG BIT(3)
+/* prototypes */
+void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
+
+int dwc3_host_init(struct dwc3 *dwc);
+void dwc3_host_exit(struct dwc3 *dwc);
+
+int dwc3_gadget_init(struct dwc3 *dwc);
+void dwc3_gadget_exit(struct dwc3 *dwc);
+
+extern int dwc3_get_device_id(void);
+extern void dwc3_put_device_id(int id);
+
#endif /* __DRIVERS_USB_DWC3_CORE_H */
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index da1ad77d8d51..433c97c15fc5 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -44,17 +44,12 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/delay.h>
-
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include "core.h"
#include "gadget.h"
#include "io.h"
-
-struct dwc3_register {
- const char *name;
- u32 offset;
-};
+#include "debug.h"
#define dump_register(nm) \
{ \
@@ -62,7 +57,7 @@ struct dwc3_register {
.offset = DWC3_ ##nm, \
}
-static const struct dwc3_register dwc3_regs[] = {
+static const struct debugfs_reg32 dwc3_regs[] = {
dump_register(GSBUSCFG0),
dump_register(GSBUSCFG1),
dump_register(GTXTHRCFG),
@@ -382,15 +377,10 @@ static const struct dwc3_register dwc3_regs[] = {
static int dwc3_regdump_show(struct seq_file *s, void *unused)
{
struct dwc3 *dwc = s->private;
- int i;
seq_printf(s, "DesignWare USB3 Core Register Dump\n");
-
- for (i = 0; i < ARRAY_SIZE(dwc3_regs); i++) {
- seq_printf(s, "%-20s : %08x\n", dwc3_regs[i].name,
- dwc3_readl(dwc->regs, dwc3_regs[i].offset));
- }
-
+ debugfs_print_regs32(s, dwc3_regs, ARRAY_SIZE(dwc3_regs),
+ dwc->regs, "");
return 0;
}
@@ -405,6 +395,75 @@ static const struct file_operations dwc3_regdump_fops = {
.release = single_release,
};
+static int dwc3_mode_show(struct seq_file *s, void *unused)
+{
+ struct dwc3 *dwc = s->private;
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
+ switch (DWC3_GCTL_PRTCAP(reg)) {
+ case DWC3_GCTL_PRTCAP_HOST:
+ seq_printf(s, "host\n");
+ break;
+ case DWC3_GCTL_PRTCAP_DEVICE:
+ seq_printf(s, "device\n");
+ break;
+ case DWC3_GCTL_PRTCAP_OTG:
+ seq_printf(s, "OTG\n");
+ break;
+ default:
+ seq_printf(s, "UNKNOWN %08x\n", DWC3_GCTL_PRTCAP(reg));
+ }
+
+ return 0;
+}
+
+static int dwc3_mode_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, dwc3_mode_show, inode->i_private);
+}
+
+static ssize_t dwc3_mode_write(struct file *file,
+ const char __user *ubuf, size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct dwc3 *dwc = s->private;
+ unsigned long flags;
+ u32 mode = 0;
+ char buf[32];
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+ return -EFAULT;
+
+ if (!strncmp(buf, "host", 4))
+ mode |= DWC3_GCTL_PRTCAP_HOST;
+
+ if (!strncmp(buf, "device", 6))
+ mode |= DWC3_GCTL_PRTCAP_DEVICE;
+
+ if (!strncmp(buf, "otg", 3))
+ mode |= DWC3_GCTL_PRTCAP_OTG;
+
+ if (mode) {
+ spin_lock_irqsave(&dwc->lock, flags);
+ dwc3_set_mode(dwc, mode);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+ }
+ return count;
+}
+
+static const struct file_operations dwc3_mode_fops = {
+ .open = dwc3_mode_open,
+ .write = dwc3_mode_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
{
struct dentry *root;
@@ -412,7 +471,7 @@ int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
int ret;
root = debugfs_create_dir(dev_name(dwc->dev), NULL);
- if (IS_ERR(root)){
+ if (IS_ERR(root)) {
ret = PTR_ERR(root);
goto err0;
}
@@ -425,6 +484,14 @@ int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
ret = PTR_ERR(file);
goto err1;
}
+
+ file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root,
+ dwc, &dwc3_mode_fops);
+ if (IS_ERR(file)) {
+ ret = PTR_ERR(file);
+ goto err1;
+ }
+
return 0;
err1:
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 062552b5fc8a..3274ac8f1200 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -48,6 +48,7 @@
#include <linux/io.h>
#include <linux/module.h>
+#include "core.h"
#include "io.h"
/*
@@ -200,6 +201,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
struct dwc3_omap *omap;
struct resource *res;
+ int devid;
int ret = -ENOMEM;
int irq;
@@ -236,16 +238,20 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
goto err1;
}
- dwc3 = platform_device_alloc("dwc3-omap", -1);
+ devid = dwc3_get_device_id();
+ if (devid < 0)
+ goto err2;
+
+ dwc3 = platform_device_alloc("dwc3", devid);
if (!dwc3) {
dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
- goto err2;
+ goto err3;
}
context = kzalloc(resource_size(res), GFP_KERNEL);
if (!context) {
dev_err(&pdev->dev, "couldn't allocate dwc3 context memory\n");
- goto err3;
+ goto err4;
}
spin_lock_init(&omap->lock);
@@ -299,7 +305,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev, "failed to request IRQ #%d --> %d\n",
omap->irq, ret);
- goto err4;
+ goto err5;
}
/* enable all IRQs */
@@ -322,26 +328,29 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
pdev->num_resources);
if (ret) {
dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n");
- goto err5;
+ goto err6;
}
ret = platform_device_add(dwc3);
if (ret) {
dev_err(&pdev->dev, "failed to register dwc3 device\n");
- goto err5;
+ goto err6;
}
return 0;
-err5:
+err6:
free_irq(omap->irq, omap);
-err4:
+err5:
kfree(omap->context);
-err3:
+err4:
platform_device_put(dwc3);
+err3:
+ dwc3_put_device_id(devid);
+
err2:
iounmap(base);
@@ -358,6 +367,7 @@ static int __devexit dwc3_omap_remove(struct platform_device *pdev)
platform_device_unregister(omap->dwc3);
+ dwc3_put_device_id(omap->dwc3->id);
free_irq(omap->irq, omap);
iounmap(omap->base);
@@ -384,18 +394,9 @@ static struct platform_driver dwc3_omap_driver = {
},
};
+module_platform_driver(dwc3_omap_driver);
+
+MODULE_ALIAS("platform:omap-dwc3");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer");
-
-static int __devinit dwc3_omap_init(void)
-{
- return platform_driver_register(&dwc3_omap_driver);
-}
-module_init(dwc3_omap_init);
-
-static void __exit dwc3_omap_exit(void)
-{
- platform_driver_unregister(&dwc3_omap_driver);
-}
-module_exit(dwc3_omap_exit);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index f77c00042685..64e1f7c67b08 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -42,52 +42,17 @@
#include <linux/pci.h>
#include <linux/platform_device.h>
+#include "core.h"
+
/* FIXME define these in <linux/pci_ids.h> */
#define PCI_VENDOR_ID_SYNOPSYS 0x16c3
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
-#define DWC3_PCI_DEVS_POSSIBLE 32
-
struct dwc3_pci {
struct device *dev;
struct platform_device *dwc3;
};
-static DECLARE_BITMAP(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE);
-
-static int dwc3_pci_get_device_id(struct dwc3_pci *glue)
-{
- int id;
-
-again:
- id = find_first_zero_bit(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE);
- if (id < DWC3_PCI_DEVS_POSSIBLE) {
- int old;
-
- old = test_and_set_bit(id, dwc3_pci_devs);
- if (old)
- goto again;
- } else {
- dev_err(glue->dev, "no space for new device\n");
- id = -ENOMEM;
- }
-
- return 0;
-}
-
-static void dwc3_pci_put_device_id(struct dwc3_pci *glue, int id)
-{
- int ret;
-
- if (id < 0)
- return;
-
- ret = test_bit(id, dwc3_pci_devs);
- WARN(!ret, "Device: %s\nID %d not in use\n",
- dev_driver_string(glue->dev), id);
- clear_bit(id, dwc3_pci_devs);
-}
-
static int __devinit dwc3_pci_probe(struct pci_dev *pci,
const struct pci_device_id *id)
{
@@ -114,11 +79,11 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
pci_set_power_state(pci, PCI_D0);
pci_set_master(pci);
- devid = dwc3_pci_get_device_id(glue);
+ devid = dwc3_get_device_id();
if (devid < 0)
goto err2;
- dwc3 = platform_device_alloc("dwc3-pci", devid);
+ dwc3 = platform_device_alloc("dwc3", devid);
if (!dwc3) {
dev_err(&pci->dev, "couldn't allocate dwc3 device\n");
goto err3;
@@ -163,13 +128,13 @@ err4:
platform_device_put(dwc3);
err3:
- dwc3_pci_put_device_id(glue, devid);
+ dwc3_put_device_id(devid);
err2:
pci_disable_device(pci);
err1:
- kfree(pci);
+ kfree(glue);
err0:
return ret;
@@ -179,7 +144,7 @@ static void __devexit dwc3_pci_remove(struct pci_dev *pci)
{
struct dwc3_pci *glue = pci_get_drvdata(pci);
- dwc3_pci_put_device_id(glue, glue->dwc3->id);
+ dwc3_put_device_id(glue->dwc3->id);
platform_device_unregister(glue->dwc3);
pci_set_drvdata(pci, NULL);
pci_disable_device(pci);
@@ -196,7 +161,7 @@ static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
static struct pci_driver dwc3_pci_driver = {
- .name = "pci-dwc3",
+ .name = "dwc3-pci",
.id_table = dwc3_pci_id_table,
.probe = dwc3_pci_probe,
.remove = __devexit_p(dwc3_pci_remove),
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 69a4e43ddf59..2f51de57593a 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -48,13 +48,13 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
#include "core.h"
#include "gadget.h"
#include "io.h"
-static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
- const struct dwc3_event_depevt *event);
+static void dwc3_ep0_do_control_status(struct dwc3 *dwc, u32 epnum);
static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
{
@@ -125,6 +125,8 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
struct dwc3_request *req)
{
+ struct dwc3 *dwc = dep->dwc;
+ u32 type;
int ret = 0;
req->request.actual = 0;
@@ -143,9 +145,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
* IRQ we were waiting for is long gone.
*/
if (dep->flags & DWC3_EP_PENDING_REQUEST) {
- struct dwc3 *dwc = dep->dwc;
unsigned direction;
- u32 type;
direction = !!(dep->flags & DWC3_EP0_DIR_IN);
@@ -165,6 +165,13 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
req->request.dma, req->request.length, type);
dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
DWC3_EP0_DIR_IN);
+ } else if (dwc->delayed_status) {
+ dwc->delayed_status = false;
+
+ if (dwc->ep0state == EP0_STATUS_PHASE)
+ dwc3_ep0_do_control_status(dwc, 1);
+ else
+ dev_dbg(dwc->dev, "too early for delayed status\n");
}
return ret;
@@ -190,9 +197,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
}
/* we share one TRB for ep0/1 */
- if (!list_empty(&dwc->eps[0]->request_list) ||
- !list_empty(&dwc->eps[1]->request_list) ||
- dwc->ep0_status_pending) {
+ if (!list_empty(&dep->request_list)) {
ret = -EBUSY;
goto out;
}
@@ -214,8 +219,9 @@ static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
struct dwc3_ep *dep = dwc->eps[0];
/* stall is always issued on EP0 */
- __dwc3_gadget_ep_set_halt(dwc->eps[0], 1);
- dwc->eps[0]->flags = DWC3_EP_ENABLED;
+ __dwc3_gadget_ep_set_halt(dep, 1);
+ dep->flags = DWC3_EP_ENABLED;
+ dwc->delayed_status = false;
if (!list_empty(&dep->request_list)) {
struct dwc3_request *req;
@@ -254,17 +260,14 @@ static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
return NULL;
}
-static void dwc3_ep0_send_status_response(struct dwc3 *dwc)
+static void dwc3_ep0_status_cmpl(struct usb_ep *ep, struct usb_request *req)
{
- dwc3_ep0_start_trans(dwc, 1, dwc->setup_buf_addr,
- dwc->ep0_usb_req.length,
- DWC3_TRBCTL_CONTROL_DATA);
}
-
/*
* ch 9.4.5
*/
-static int dwc3_ep0_handle_status(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+static int dwc3_ep0_handle_status(struct dwc3 *dwc,
+ struct usb_ctrlrequest *ctrl)
{
struct dwc3_ep *dep;
u32 recip;
@@ -291,7 +294,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl
case USB_RECIP_ENDPOINT:
dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
if (!dep)
- return -EINVAL;
+ return -EINVAL;
if (dep->flags & DWC3_EP_STALL)
usb_status = 1 << USB_ENDPOINT_HALT;
@@ -302,10 +305,14 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl
response_pkt = (__le16 *) dwc->setup_buf;
*response_pkt = cpu_to_le16(usb_status);
- dwc->ep0_usb_req.length = sizeof(*response_pkt);
- dwc->ep0_status_pending = 1;
- return 0;
+ dep = dwc->eps[0];
+ dwc->ep0_usb_req.dep = dep;
+ dwc->ep0_usb_req.request.length = sizeof(*response_pkt);
+ dwc->ep0_usb_req.request.dma = dwc->setup_buf_addr;
+ dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl;
+
+ return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
}
static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
@@ -396,8 +403,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
case USB_RECIP_ENDPOINT:
switch (wValue) {
case USB_ENDPOINT_HALT:
-
- dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
+ dep = dwc3_wIndex_to_dep(dwc, wIndex);
if (!dep)
return -EINVAL;
ret = __dwc3_gadget_ep_set_halt(dep, set);
@@ -422,8 +428,15 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
u32 reg;
addr = le16_to_cpu(ctrl->wValue);
- if (addr > 127)
+ if (addr > 127) {
+ dev_dbg(dwc->dev, "invalid device address %d\n", addr);
return -EINVAL;
+ }
+
+ if (dwc->dev_state == DWC3_CONFIGURED_STATE) {
+ dev_dbg(dwc->dev, "trying to set address when configured\n");
+ return -EINVAL;
+ }
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
reg &= ~(DWC3_DCFG_DEVADDR_MASK);
@@ -473,8 +486,10 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
if (!cfg)
dwc->dev_state = DWC3_ADDRESS_STATE;
break;
+ default:
+ ret = -EINVAL;
}
- return 0;
+ return ret;
}
static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
@@ -537,6 +552,9 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
else
ret = dwc3_ep0_delegate_req(dwc, ctrl);
+ if (ret == USB_GADGET_DELAYED_STATUS)
+ dwc->delayed_status = true;
+
if (ret >= 0)
return;
@@ -550,27 +568,21 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
struct dwc3_request *r = NULL;
struct usb_request *ur;
struct dwc3_trb trb;
- struct dwc3_ep *dep;
+ struct dwc3_ep *ep0;
u32 transferred;
u8 epnum;
epnum = event->endpoint_number;
- dep = dwc->eps[epnum];
+ ep0 = dwc->eps[0];
dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
- if (!dwc->ep0_status_pending) {
- r = next_request(&dwc->eps[0]->request_list);
- ur = &r->request;
- } else {
- ur = &dwc->ep0_usb_req;
- dwc->ep0_status_pending = 0;
- }
+ r = next_request(&ep0->request_list);
+ ur = &r->request;
dwc3_trb_to_nat(dwc->ep0_trb, &trb);
if (dwc->ep0_bounced) {
- struct dwc3_ep *ep0 = dwc->eps[0];
transferred = min_t(u32, ur->length,
ep0->endpoint.maxpacket - trb.length);
@@ -591,7 +603,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
* seems to be case when req.length > maxpacket. Could it be?
*/
if (r)
- dwc3_gadget_giveback(dep, r, 0);
+ dwc3_gadget_giveback(ep0, r, 0);
}
}
@@ -619,6 +631,7 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
dep->flags &= ~DWC3_EP_BUSY;
+ dwc->setup_packet_pending = false;
switch (dwc->ep0state) {
case EP0_SETUP_PHASE:
@@ -643,7 +656,6 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
static void dwc3_ep0_do_control_setup(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
- dwc->ep0state = EP0_SETUP_PHASE;
dwc3_ep0_out_start(dwc);
}
@@ -655,12 +667,6 @@ static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
int ret;
dep = dwc->eps[0];
- dwc->ep0state = EP0_DATA_PHASE;
-
- if (dwc->ep0_status_pending) {
- dwc3_ep0_send_status_response(dwc);
- return;
- }
if (list_empty(&dep->request_list)) {
dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n");
@@ -674,7 +680,6 @@ static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
req = next_request(&dep->request_list);
req->direction = !!event->endpoint_number;
- dwc->ep0state = EP0_DATA_PHASE;
if (req->request.length == 0) {
ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
dwc->ctrl_req_addr, 0,
@@ -706,35 +711,79 @@ static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
WARN_ON(ret < 0);
}
-static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
- const struct dwc3_event_depevt *event)
+static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
{
+ struct dwc3 *dwc = dep->dwc;
u32 type;
- int ret;
-
- dwc->ep0state = EP0_STATUS_PHASE;
type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
: DWC3_TRBCTL_CONTROL_STATUS2;
- ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+ return dwc3_ep0_start_trans(dwc, dep->number,
dwc->ctrl_req_addr, 0, type);
+}
- WARN_ON(ret < 0);
+static void dwc3_ep0_do_control_status(struct dwc3 *dwc, u32 epnum)
+{
+ struct dwc3_ep *dep = dwc->eps[epnum];
+
+ WARN_ON(dwc3_ep0_start_control_status(dep));
}
static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
+ dwc->setup_packet_pending = true;
+
+ /*
+ * This part is very tricky: If we has just handled
+ * XferNotReady(Setup) and we're now expecting a
+ * XferComplete but, instead, we receive another
+ * XferNotReady(Setup), we should STALL and restart
+ * the state machine.
+ *
+ * In all other cases, we just continue waiting
+ * for the XferComplete event.
+ *
+ * We are a little bit unsafe here because we're
+ * not trying to ensure that last event was, indeed,
+ * XferNotReady(Setup).
+ *
+ * Still, we don't expect any condition where that
+ * should happen and, even if it does, it would be
+ * another error condition.
+ */
+ if (dwc->ep0_next_event == DWC3_EP0_COMPLETE) {
+ switch (event->status) {
+ case DEPEVT_STATUS_CONTROL_SETUP:
+ dev_vdbg(dwc->dev, "Unexpected XferNotReady(Setup)\n");
+ dwc3_ep0_stall_and_restart(dwc);
+ break;
+ case DEPEVT_STATUS_CONTROL_DATA:
+ /* FALLTHROUGH */
+ case DEPEVT_STATUS_CONTROL_STATUS:
+ /* FALLTHROUGH */
+ default:
+ dev_vdbg(dwc->dev, "waiting for XferComplete\n");
+ }
+
+ return;
+ }
+
switch (event->status) {
case DEPEVT_STATUS_CONTROL_SETUP:
dev_vdbg(dwc->dev, "Control Setup\n");
+
+ dwc->ep0state = EP0_SETUP_PHASE;
+
dwc3_ep0_do_control_setup(dwc, event);
break;
case DEPEVT_STATUS_CONTROL_DATA:
dev_vdbg(dwc->dev, "Control Data\n");
+ dwc->ep0state = EP0_DATA_PHASE;
+
if (dwc->ep0_next_event != DWC3_EP0_NRDY_DATA) {
dev_vdbg(dwc->dev, "Expected %d got %d\n",
dwc->ep0_next_event,
@@ -764,6 +813,8 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
case DEPEVT_STATUS_CONTROL_STATUS:
dev_vdbg(dwc->dev, "Control Status\n");
+ dwc->ep0state = EP0_STATUS_PHASE;
+
if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) {
dev_vdbg(dwc->dev, "Expected %d got %d\n",
dwc->ep0_next_event,
@@ -772,12 +823,19 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
dwc3_ep0_stall_and_restart(dwc);
return;
}
- dwc3_ep0_do_control_status(dwc, event);
+
+ if (dwc->delayed_status) {
+ WARN_ON_ONCE(event->endpoint_number != 1);
+ dev_vdbg(dwc->dev, "Mass Storage delayed status\n");
+ return;
+ }
+
+ dwc3_ep0_do_control_status(dwc, event->endpoint_number);
}
}
void dwc3_ep0_interrupt(struct dwc3 *dwc,
- const const struct dwc3_event_depevt *event)
+ const struct dwc3_event_depevt *event)
{
u8 epnum = event->endpoint_number;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 25dbd8614e72..a696bde53222 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -65,6 +65,22 @@ void dwc3_map_buffer_to_dma(struct dwc3_request *req)
return;
}
+ if (req->request.num_sgs) {
+ int mapped;
+
+ mapped = dma_map_sg(dwc->dev, req->request.sg,
+ req->request.num_sgs,
+ req->direction ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ if (mapped < 0) {
+ dev_err(dwc->dev, "failed to map SGs\n");
+ return;
+ }
+
+ req->request.num_mapped_sgs = mapped;
+ return;
+ }
+
if (req->request.dma == DMA_ADDR_INVALID) {
req->request.dma = dma_map_single(dwc->dev, req->request.buf,
req->request.length, req->direction
@@ -82,6 +98,17 @@ void dwc3_unmap_buffer_from_dma(struct dwc3_request *req)
return;
}
+ if (req->request.num_mapped_sgs) {
+ req->request.dma = DMA_ADDR_INVALID;
+ dma_unmap_sg(dwc->dev, req->request.sg,
+ req->request.num_sgs,
+ req->direction ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+
+ req->request.num_mapped_sgs = 0;
+ return;
+ }
+
if (req->mapped) {
dma_unmap_single(dwc->dev, req->request.dma,
req->request.length, req->direction
@@ -97,7 +124,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
struct dwc3 *dwc = dep->dwc;
if (req->queued) {
- dep->busy_slot++;
+ if (req->request.num_mapped_sgs)
+ dep->busy_slot += req->request.num_mapped_sgs;
+ else
+ dep->busy_slot++;
+
/*
* Skip LINK TRB. We can't use req->trb and check for
* DWC3_TRBCTL_LINK_TRB because it points the TRB we just
@@ -108,6 +139,7 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
dep->busy_slot++;
}
list_del(&req->list);
+ req->trb = NULL;
if (req->request.status == -EINPROGRESS)
req->request.status = status;
@@ -251,7 +283,8 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
}
static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
- const struct usb_endpoint_descriptor *desc)
+ const struct usb_endpoint_descriptor *desc,
+ const struct usb_ss_ep_comp_descriptor *comp_desc)
{
struct dwc3_gadget_ep_cmd_params params;
@@ -264,7 +297,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
| DWC3_DEPCFG_XFER_NOT_READY_EN;
- if (usb_endpoint_xfer_bulk(desc) && dep->endpoint.max_streams) {
+ if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) {
params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
| DWC3_DEPCFG_STREAM_EVENT_EN;
dep->stream_capable = true;
@@ -317,7 +350,8 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
* Caller should take care of locking
*/
static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
- const struct usb_endpoint_descriptor *desc)
+ const struct usb_endpoint_descriptor *desc,
+ const struct usb_ss_ep_comp_descriptor *comp_desc)
{
struct dwc3 *dwc = dep->dwc;
u32 reg;
@@ -329,7 +363,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
return ret;
}
- ret = dwc3_gadget_set_ep_config(dwc, dep, desc);
+ ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc);
if (ret)
return ret;
@@ -343,6 +377,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
return ret;
dep->desc = desc;
+ dep->comp_desc = comp_desc;
dep->type = usb_endpoint_type(desc);
dep->flags |= DWC3_EP_ENABLED;
@@ -405,6 +440,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
dep->stream_capable = false;
dep->desc = NULL;
+ dep->comp_desc = NULL;
dep->type = 0;
dep->flags = 0;
@@ -473,7 +509,7 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep,
dev_vdbg(dwc->dev, "Enabling %s\n", dep->name);
spin_lock_irqsave(&dwc->lock, flags);
- ret = __dwc3_gadget_ep_enable(dep, desc);
+ ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc);
spin_unlock_irqrestore(&dwc->lock, flags);
return ret;
@@ -539,6 +575,85 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
kfree(req);
}
+/**
+ * dwc3_prepare_one_trb - setup one TRB from one request
+ * @dep: endpoint for which this request is prepared
+ * @req: dwc3_request pointer
+ */
+static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
+ struct dwc3_request *req, dma_addr_t dma,
+ unsigned length, unsigned last, unsigned chain)
+{
+ struct dwc3 *dwc = dep->dwc;
+ struct dwc3_trb_hw *trb_hw;
+ struct dwc3_trb trb;
+
+ unsigned int cur_slot;
+
+ dev_vdbg(dwc->dev, "%s: req %p dma %08llx length %d%s%s\n",
+ dep->name, req, (unsigned long long) dma,
+ length, last ? " last" : "",
+ chain ? " chain" : "");
+
+ trb_hw = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
+ cur_slot = dep->free_slot;
+ dep->free_slot++;
+
+ /* Skip the LINK-TRB on ISOC */
+ if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
+ usb_endpoint_xfer_isoc(dep->desc))
+ return;
+
+ memset(&trb, 0, sizeof(trb));
+ if (!req->trb) {
+ dwc3_gadget_move_request_queued(req);
+ req->trb = trb_hw;
+ req->trb_dma = dwc3_trb_dma_offset(dep, trb_hw);
+ }
+
+ if (usb_endpoint_xfer_isoc(dep->desc)) {
+ trb.isp_imi = true;
+ trb.csp = true;
+ } else {
+ trb.chn = chain;
+ trb.lst = last;
+ }
+
+ if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable)
+ trb.sid_sofn = req->request.stream_id;
+
+ switch (usb_endpoint_type(dep->desc)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP;
+ break;
+
+ case USB_ENDPOINT_XFER_ISOC:
+ trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
+
+ /* IOC every DWC3_TRB_NUM / 4 so we can refill */
+ if (!(cur_slot % (DWC3_TRB_NUM / 4)))
+ trb.ioc = last;
+ break;
+
+ case USB_ENDPOINT_XFER_BULK:
+ case USB_ENDPOINT_XFER_INT:
+ trb.trbctl = DWC3_TRBCTL_NORMAL;
+ break;
+ default:
+ /*
+ * This is only possible with faulty memory because we
+ * checked it already :)
+ */
+ BUG();
+ }
+
+ trb.length = length;
+ trb.bplh = dma;
+ trb.hwo = true;
+
+ dwc3_trb_to_hw(&trb, trb_hw);
+}
+
/*
* dwc3_prepare_trbs - setup TRBs from requests
* @dep: endpoint for which requests are being prepared
@@ -548,18 +663,17 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
* transfers. The functions returns once there are not more TRBs available or
* it run out of requests.
*/
-static struct dwc3_request *dwc3_prepare_trbs(struct dwc3_ep *dep,
- bool starting)
+static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
{
- struct dwc3_request *req, *n, *ret = NULL;
- struct dwc3_trb_hw *trb_hw;
- struct dwc3_trb trb;
+ struct dwc3_request *req, *n;
u32 trbs_left;
+ unsigned int last_one = 0;
BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
/* the first request must not be queued */
trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
+
/*
* if busy & slot are equal than it is either full or empty. If we are
* starting to proceed requests then we are empty. Otherwise we ar
@@ -567,7 +681,7 @@ static struct dwc3_request *dwc3_prepare_trbs(struct dwc3_ep *dep,
*/
if (!trbs_left) {
if (!starting)
- return NULL;
+ return;
trbs_left = DWC3_TRB_NUM;
/*
* In case we start from scratch, we queue the ISOC requests
@@ -591,94 +705,62 @@ static struct dwc3_request *dwc3_prepare_trbs(struct dwc3_ep *dep,
/* The last TRB is a link TRB, not used for xfer */
if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->desc))
- return NULL;
+ return;
list_for_each_entry_safe(req, n, &dep->request_list, list) {
- unsigned int last_one = 0;
- unsigned int cur_slot;
+ unsigned length;
+ dma_addr_t dma;
- trb_hw = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
- cur_slot = dep->free_slot;
- dep->free_slot++;
+ if (req->request.num_mapped_sgs > 0) {
+ struct usb_request *request = &req->request;
+ struct scatterlist *sg = request->sg;
+ struct scatterlist *s;
+ int i;
- /* Skip the LINK-TRB on ISOC */
- if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
- usb_endpoint_xfer_isoc(dep->desc))
- continue;
+ for_each_sg(sg, s, request->num_mapped_sgs, i) {
+ unsigned chain = true;
- dwc3_gadget_move_request_queued(req);
- memset(&trb, 0, sizeof(trb));
- trbs_left--;
+ length = sg_dma_len(s);
+ dma = sg_dma_address(s);
- /* Is our TRB pool empty? */
- if (!trbs_left)
- last_one = 1;
- /* Is this the last request? */
- if (list_empty(&dep->request_list))
- last_one = 1;
+ if (i == (request->num_mapped_sgs - 1)
+ || sg_is_last(s)) {
+ last_one = true;
+ chain = false;
+ }
- /*
- * FIXME we shouldn't need to set LST bit always but we are
- * facing some weird problem with the Hardware where it doesn't
- * complete even though it has been previously started.
- *
- * While we're debugging the problem, as a workaround to
- * multiple TRBs handling, use only one TRB at a time.
- */
- last_one = 1;
+ trbs_left--;
+ if (!trbs_left)
+ last_one = true;
- req->trb = trb_hw;
- if (!ret)
- ret = req;
+ if (last_one)
+ chain = false;
- trb.bplh = req->request.dma;
+ dwc3_prepare_one_trb(dep, req, dma, length,
+ last_one, chain);
- if (usb_endpoint_xfer_isoc(dep->desc)) {
- trb.isp_imi = true;
- trb.csp = true;
+ if (last_one)
+ break;
+ }
} else {
- trb.lst = last_one;
- }
+ dma = req->request.dma;
+ length = req->request.length;
+ trbs_left--;
- if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable)
- trb.sid_sofn = req->request.stream_id;
-
- switch (usb_endpoint_type(dep->desc)) {
- case USB_ENDPOINT_XFER_CONTROL:
- trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP;
- break;
+ if (!trbs_left)
+ last_one = 1;
- case USB_ENDPOINT_XFER_ISOC:
- trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
+ /* Is this the last request? */
+ if (list_is_last(&req->list, &dep->request_list))
+ last_one = 1;
- /* IOC every DWC3_TRB_NUM / 4 so we can refill */
- if (!(cur_slot % (DWC3_TRB_NUM / 4)))
- trb.ioc = last_one;
- break;
+ dwc3_prepare_one_trb(dep, req, dma, length,
+ last_one, false);
- case USB_ENDPOINT_XFER_BULK:
- case USB_ENDPOINT_XFER_INT:
- trb.trbctl = DWC3_TRBCTL_NORMAL;
- break;
- default:
- /*
- * This is only possible with faulty memory because we
- * checked it already :)
- */
- BUG();
+ if (last_one)
+ break;
}
-
- trb.length = req->request.length;
- trb.hwo = true;
-
- dwc3_trb_to_hw(&trb, trb_hw);
- req->trb_dma = dwc3_trb_dma_offset(dep, trb_hw);
-
- if (last_one)
- break;
}
-
- return ret;
}
static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
@@ -707,11 +789,13 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
/* req points to the first request which will be sent */
req = next_request(&dep->req_queued);
} else {
+ dwc3_prepare_trbs(dep, start_new);
+
/*
* req points to the first request where HWO changed
* from 0 to 1
*/
- req = dwc3_prepare_trbs(dep, start_new);
+ req = next_request(&dep->req_queued);
}
if (!req) {
dep->flags |= DWC3_EP_PENDING_REQUEST;
@@ -745,8 +829,9 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
dep->flags |= DWC3_EP_BUSY;
dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
dep->number);
- if (!dep->res_trans_idx)
- printk_once(KERN_ERR "%s() res_trans_idx is invalid\n", __func__);
+
+ WARN_ON_ONCE(!dep->res_trans_idx);
+
return 0;
}
@@ -1155,35 +1240,9 @@ static int dwc3_gadget_start(struct usb_gadget *g,
dwc->gadget_driver = driver;
dwc->gadget.dev.driver = &driver->driver;
- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
-
- reg &= ~DWC3_GCTL_SCALEDOWN(3);
- reg &= ~DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG);
- reg &= ~DWC3_GCTL_DISSCRAMBLE;
- reg |= DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_DEVICE);
-
- switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams0)) {
- case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
- reg &= ~DWC3_GCTL_DSBLCLKGTNG;
- break;
- default:
- dev_dbg(dwc->dev, "No power optimization available\n");
- }
-
- /*
- * WORKAROUND: DWC3 revisions <1.90a have a bug
- * when The device fails to connect at SuperSpeed
- * and falls back to high-speed mode which causes
- * the device to enter in a Connect/Disconnect loop
- */
- if (dwc->revision < DWC3_REVISION_190A)
- reg |= DWC3_GCTL_U2RSTECN;
-
- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
-
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
reg &= ~(DWC3_DCFG_SPEED_MASK);
- reg |= DWC3_DCFG_SUPERSPEED;
+ reg |= dwc->maximum_speed;
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
dwc->start_config_issued = false;
@@ -1192,14 +1251,14 @@ static int dwc3_gadget_start(struct usb_gadget *g,
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
dep = dwc->eps[0];
- ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+ ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
goto err0;
}
dep = dwc->eps[1];
- ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+ ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
goto err1;
@@ -1290,11 +1349,10 @@ static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc)
&dwc->gadget.ep_list);
ret = dwc3_alloc_trb_pool(dep);
- if (ret) {
- dev_err(dwc->dev, "%s: failed to allocate TRB pool\n", dep->name);
+ if (ret)
return ret;
- }
}
+
INIT_LIST_HEAD(&dep->request_list);
INIT_LIST_HEAD(&dep->req_queued);
}
@@ -1334,8 +1392,10 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
do {
req = next_request(&dep->req_queued);
- if (!req)
- break;
+ if (!req) {
+ WARN_ON_ONCE(1);
+ return 1;
+ }
dwc3_trb_to_nat(req->trb, &trb);
@@ -1400,6 +1460,31 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
dep->flags &= ~DWC3_EP_BUSY;
dep->res_trans_idx = 0;
}
+
+ /*
+ * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround.
+ * See dwc3_gadget_linksts_change_interrupt() for 1st half.
+ */
+ if (dwc->revision < DWC3_REVISION_183A) {
+ u32 reg;
+ int i;
+
+ for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
+ struct dwc3_ep *dep = dwc->eps[i];
+
+ if (!(dep->flags & DWC3_EP_ENABLED))
+ continue;
+
+ if (!list_empty(&dep->req_queued))
+ return;
+ }
+
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg |= dwc->u1u2;
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+ dwc->u1u2 = 0;
+ }
}
static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
@@ -1639,6 +1724,7 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
dwc->start_config_issued = false;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
+ dwc->setup_packet_pending = false;
}
static void dwc3_gadget_usb3_phy_power(struct dwc3 *dwc, int on)
@@ -1675,6 +1761,40 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
dev_vdbg(dwc->dev, "%s\n", __func__);
+ /*
+ * WORKAROUND: DWC3 revisions <1.88a have an issue which
+ * would cause a missing Disconnect Event if there's a
+ * pending Setup Packet in the FIFO.
+ *
+ * There's no suggested workaround on the official Bug
+ * report, which states that "unless the driver/application
+ * is doing any special handling of a disconnect event,
+ * there is no functional issue".
+ *
+ * Unfortunately, it turns out that we _do_ some special
+ * handling of a disconnect event, namely complete all
+ * pending transfers, notify gadget driver of the
+ * disconnection, and so on.
+ *
+ * Our suggested workaround is to follow the Disconnect
+ * Event steps here, instead, based on a setup_packet_pending
+ * flag. Such flag gets set whenever we have a XferNotReady
+ * event on EP0 and gets cleared on XferComplete for the
+ * same endpoint.
+ *
+ * Refers to:
+ *
+ * STAR#9000466709: RTL: Device : Disconnect event not
+ * generated if setup packet pending in FIFO
+ */
+ if (dwc->revision < DWC3_REVISION_188A) {
+ if (dwc->setup_packet_pending)
+ dwc3_gadget_disconnect_interrupt(dwc);
+ }
+
+ /* after reset -> Default State */
+ dwc->dev_state = DWC3_DEFAULT_STATE;
+
/* Enable PHYs */
dwc3_gadget_usb2_phy_power(dwc, true);
dwc3_gadget_usb3_phy_power(dwc, true);
@@ -1755,6 +1875,22 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
switch (speed) {
case DWC3_DCFG_SUPERSPEED:
+ /*
+ * WORKAROUND: DWC3 revisions <1.90a have an issue which
+ * would cause a missing USB3 Reset event.
+ *
+ * In such situations, we should force a USB3 Reset
+ * event by calling our dwc3_gadget_reset_interrupt()
+ * routine.
+ *
+ * Refers to:
+ *
+ * STAR#9000483510: RTL: SS : USB3 reset event may
+ * not be generated always when the link enters poll
+ */
+ if (dwc->revision < DWC3_REVISION_190A)
+ dwc3_gadget_reset_interrupt(dwc);
+
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
dwc->gadget.ep0->maxpacket = 512;
dwc->gadget.speed = USB_SPEED_SUPER;
@@ -1781,14 +1917,14 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
dwc3_gadget_disable_phy(dwc, dwc->gadget.speed);
dep = dwc->eps[0];
- ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+ ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
return;
}
dep = dwc->eps[1];
- ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+ ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
return;
@@ -1818,8 +1954,55 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
unsigned int evtinfo)
{
- /* The fith bit says SuperSpeed yes or no. */
- dwc->link_state = evtinfo & DWC3_LINK_STATE_MASK;
+ enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
+
+ /*
+ * WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending
+ * on the link partner, the USB session might do multiple entry/exit
+ * of low power states before a transfer takes place.
+ *
+ * Due to this problem, we might experience lower throughput. The
+ * suggested workaround is to disable DCTL[12:9] bits if we're
+ * transitioning from U1/U2 to U0 and enable those bits again
+ * after a transfer completes and there are no pending transfers
+ * on any of the enabled endpoints.
+ *
+ * This is the first half of that workaround.
+ *
+ * Refers to:
+ *
+ * STAR#9000446952: RTL: Device SS : if U1/U2 ->U0 takes >128us
+ * core send LGO_Ux entering U0
+ */
+ if (dwc->revision < DWC3_REVISION_183A) {
+ if (next == DWC3_LINK_STATE_U0) {
+ u32 u1u2;
+ u32 reg;
+
+ switch (dwc->link_state) {
+ case DWC3_LINK_STATE_U1:
+ case DWC3_LINK_STATE_U2:
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ u1u2 = reg & (DWC3_DCTL_INITU2ENA
+ | DWC3_DCTL_ACCEPTU2ENA
+ | DWC3_DCTL_INITU1ENA
+ | DWC3_DCTL_ACCEPTU1ENA);
+
+ if (!dwc->u1u2)
+ dwc->u1u2 = reg & u1u2;
+
+ reg &= ~u1u2;
+
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ }
+ }
+
+ dwc->link_state = next;
dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state);
}
@@ -1925,7 +2108,7 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
spin_lock(&dwc->lock);
- for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) {
+ for (i = 0; i < dwc->num_event_buffers; i++) {
irqreturn_t status;
status = dwc3_process_event_buf(dwc, i);
@@ -1986,9 +2169,10 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
dev_set_name(&dwc->gadget.dev, "gadget");
dwc->gadget.ops = &dwc3_gadget_ops;
- dwc->gadget.is_dualspeed = true;
+ dwc->gadget.max_speed = USB_SPEED_SUPER;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->gadget.dev.parent = dwc->dev;
+ dwc->gadget.sg_supported = true;
dma_set_coherent_mask(&dwc->gadget.dev, dwc->dev->coherent_dma_mask);
@@ -2076,7 +2260,6 @@ err0:
void dwc3_gadget_exit(struct dwc3 *dwc)
{
int irq;
- int i;
usb_del_gadget_udc(&dwc->gadget);
irq = platform_get_irq(to_platform_device(dwc->dev), 0);
@@ -2084,9 +2267,6 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
free_irq(irq, dwc);
- for (i = 0; i < ARRAY_SIZE(dwc->eps); i++)
- __dwc3_gadget_ep_disable(dwc->eps[i]);
-
dwc3_gadget_free_endpoints(dwc);
dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 71145a449d99..d97f467d41cc 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -79,19 +79,6 @@ struct dwc3_gadget_ep_cmd_params {
/* -------------------------------------------------------------------------- */
-struct dwc3_request {
- struct usb_request request;
- struct list_head list;
- struct dwc3_ep *dep;
-
- u8 epnum;
- struct dwc3_trb_hw *trb;
- dma_addr_t trb_dma;
-
- unsigned direction:1;
- unsigned mapped:1;
- unsigned queued:1;
-};
#define to_dwc3_request(r) (container_of(r, struct dwc3_request, request))
static inline struct dwc3_request *next_request(struct list_head *list)
@@ -110,23 +97,11 @@ static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req)
list_move_tail(&req->list, &dep->req_queued);
}
-#if defined(CONFIG_USB_GADGET_DWC3) || defined(CONFIG_USB_GADGET_DWC3_MODULE)
-int dwc3_gadget_init(struct dwc3 *dwc);
-void dwc3_gadget_exit(struct dwc3 *dwc);
-#else
-static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; }
-static inline void dwc3_gadget_exit(struct dwc3 *dwc) { }
-static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
- unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
-{
- return 0;
-}
-#endif
-
void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
int status);
-void dwc3_ep0_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event);
+void dwc3_ep0_interrupt(struct dwc3 *dwc,
+ const struct dwc3_event_depevt *event);
void dwc3_ep0_out_start(struct dwc3 *dwc);
int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
gfp_t gfp_flags);
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
new file mode 100644
index 000000000000..7cfe211b6c37
--- /dev/null
+++ b/drivers/usb/dwc3/host.c
@@ -0,0 +1,102 @@
+/**
+ * host.c - DesignWare USB3 DRD Controller Host Glue
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/platform_device.h>
+
+#include "core.h"
+
+static struct resource generic_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+int dwc3_host_init(struct dwc3 *dwc)
+{
+ struct platform_device *xhci;
+ int ret;
+
+ xhci = platform_device_alloc("xhci", -1);
+ if (!xhci) {
+ dev_err(dwc->dev, "couldn't allocate xHCI device\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ dma_set_coherent_mask(&xhci->dev, dwc->dev->coherent_dma_mask);
+
+ xhci->dev.parent = dwc->dev;
+ xhci->dev.dma_mask = dwc->dev->dma_mask;
+ xhci->dev.dma_parms = dwc->dev->dma_parms;
+
+ dwc->xhci = xhci;
+
+ /* setup resources */
+ generic_resources[0].start = dwc->irq;
+
+ generic_resources[1].start = dwc->res->start;
+ generic_resources[1].end = dwc->res->start + 0x7fff;
+
+ ret = platform_device_add_resources(xhci, generic_resources,
+ ARRAY_SIZE(generic_resources));
+ if (ret) {
+ dev_err(dwc->dev, "couldn't add resources to xHCI device\n");
+ goto err1;
+ }
+
+ ret = platform_device_add(xhci);
+ if (ret) {
+ dev_err(dwc->dev, "failed to register xHCI device\n");
+ goto err1;
+ }
+
+ return 0;
+
+err1:
+ platform_device_put(xhci);
+
+err0:
+ return ret;
+}
+
+void dwc3_host_exit(struct dwc3 *dwc)
+{
+ platform_device_unregister(dwc->xhci);
+}
diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
index bc957db1ea4b..071d561f3e68 100644
--- a/drivers/usb/dwc3/io.h
+++ b/drivers/usb/dwc3/io.h
@@ -39,7 +39,7 @@
#ifndef __DRIVERS_USB_DWC3_IO_H
#define __DRIVERS_USB_DWC3_IO_H
-#include <asm/io.h>
+#include <linux/io.h>
static inline u32 dwc3_readl(void __iomem *base, u32 offset)
{
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 03:55:56 +0100