diff options
Diffstat (limited to 'drivers/usb/gadget/net2280.h')
-rw-r--r-- | drivers/usb/gadget/net2280.h | 308 |
1 files changed, 0 insertions, 308 deletions
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h deleted file mode 100644 index a844be0d683a..000000000000 --- a/drivers/usb/gadget/net2280.h +++ /dev/null @@ -1,308 +0,0 @@ -/* - * NetChip 2280 high/full speed USB device controller. - * Unlike many such controllers, this one talks PCI. - */ - -/* - * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) - * Copyright (C) 2003 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/usb/net2280.h> - -/*-------------------------------------------------------------------------*/ - -#ifdef __KERNEL__ - -/* indexed registers [11.10] are accessed indirectly - * caller must own the device lock. - */ - -static inline u32 -get_idx_reg (struct net2280_regs __iomem *regs, u32 index) -{ - writel (index, ®s->idxaddr); - /* NOTE: synchs device/cpu memory views */ - return readl (®s->idxdata); -} - -static inline void -set_idx_reg (struct net2280_regs __iomem *regs, u32 index, u32 value) -{ - writel (index, ®s->idxaddr); - writel (value, ®s->idxdata); - /* posted, may not be visible yet */ -} - -#endif /* __KERNEL__ */ - - -#define REG_DIAG 0x0 -#define RETRY_COUNTER 16 -#define FORCE_PCI_SERR 11 -#define FORCE_PCI_INTERRUPT 10 -#define FORCE_USB_INTERRUPT 9 -#define FORCE_CPU_INTERRUPT 8 -#define ILLEGAL_BYTE_ENABLES 5 -#define FAST_TIMES 4 -#define FORCE_RECEIVE_ERROR 2 -#define FORCE_TRANSMIT_CRC_ERROR 0 -#define REG_FRAME 0x02 /* from last sof */ -#define REG_CHIPREV 0x03 /* in bcd */ -#define REG_HS_NAK_RATE 0x0a /* NAK per N uframes */ - -#define CHIPREV_1 0x0100 -#define CHIPREV_1A 0x0110 - -#ifdef __KERNEL__ - -/* ep a-f highspeed and fullspeed maxpacket, addresses - * computed from ep->num - */ -#define REG_EP_MAXPKT(dev,num) (((num) + 1) * 0x10 + \ - (((dev)->gadget.speed == USB_SPEED_HIGH) ? 0 : 1)) - -/*-------------------------------------------------------------------------*/ - -/* [8.3] for scatter/gather i/o - * use struct net2280_dma_regs bitfields - */ -struct net2280_dma { - __le32 dmacount; - __le32 dmaaddr; /* the buffer */ - __le32 dmadesc; /* next dma descriptor */ - __le32 _reserved; -} __attribute__ ((aligned (16))); - -/*-------------------------------------------------------------------------*/ - -/* DRIVER DATA STRUCTURES and UTILITIES */ - -struct net2280_ep { - struct usb_ep ep; - struct net2280_ep_regs __iomem *regs; - struct net2280_dma_regs __iomem *dma; - struct net2280_dma *dummy; - dma_addr_t td_dma; /* of dummy */ - struct net2280 *dev; - unsigned long irqs; - - /* analogous to a host-side qh */ - struct list_head queue; - const struct usb_endpoint_descriptor *desc; - unsigned num : 8, - fifo_size : 12, - in_fifo_validate : 1, - out_overflow : 1, - stopped : 1, - wedged : 1, - is_in : 1, - is_iso : 1, - responded : 1; -}; - -static inline void allow_status (struct net2280_ep *ep) -{ - /* ep0 only */ - writel ( (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) - | (1 << CLEAR_NAK_OUT_PACKETS) - | (1 << CLEAR_NAK_OUT_PACKETS_MODE) - , &ep->regs->ep_rsp); - ep->stopped = 1; -} - -/* count (<= 4) bytes in the next fifo write will be valid */ -static inline void set_fifo_bytecount (struct net2280_ep *ep, unsigned count) -{ - writeb (count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); -} - -struct net2280_request { - struct usb_request req; - struct net2280_dma *td; - dma_addr_t td_dma; - struct list_head queue; - unsigned mapped : 1, - valid : 1; -}; - -struct net2280 { - /* each pci device provides one gadget, several endpoints */ - struct usb_gadget gadget; - spinlock_t lock; - struct net2280_ep ep [7]; - struct usb_gadget_driver *driver; - unsigned enabled : 1, - protocol_stall : 1, - softconnect : 1, - got_irq : 1, - region : 1; - u16 chiprev; - - /* pci state used to access those endpoints */ - struct pci_dev *pdev; - struct net2280_regs __iomem *regs; - struct net2280_usb_regs __iomem *usb; - struct net2280_pci_regs __iomem *pci; - struct net2280_dma_regs __iomem *dma; - struct net2280_dep_regs __iomem *dep; - struct net2280_ep_regs __iomem *epregs; - - struct pci_pool *requests; - // statistics... -}; - -static inline void set_halt (struct net2280_ep *ep) -{ - /* ep0 and bulk/intr endpoints */ - writel ( (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) - /* set NAK_OUT for erratum 0114 */ - | ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) - | (1 << SET_ENDPOINT_HALT) - , &ep->regs->ep_rsp); -} - -static inline void clear_halt (struct net2280_ep *ep) -{ - /* ep0 and bulk/intr endpoints */ - writel ( (1 << CLEAR_ENDPOINT_HALT) - | (1 << CLEAR_ENDPOINT_TOGGLE) - /* unless the gadget driver left a short packet in the - * fifo, this reverses the erratum 0114 workaround. - */ - | ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS) - , &ep->regs->ep_rsp); -} - -#ifdef USE_RDK_LEDS - -static inline void net2280_led_init (struct net2280 *dev) -{ - /* LED3 (green) is on during USB activity. note erratum 0113. */ - writel ((1 << GPIO3_LED_SELECT) - | (1 << GPIO3_OUTPUT_ENABLE) - | (1 << GPIO2_OUTPUT_ENABLE) - | (1 << GPIO1_OUTPUT_ENABLE) - | (1 << GPIO0_OUTPUT_ENABLE) - , &dev->regs->gpioctl); -} - -/* indicate speed with bi-color LED 0/1 */ -static inline -void net2280_led_speed (struct net2280 *dev, enum usb_device_speed speed) -{ - u32 val = readl (&dev->regs->gpioctl); - switch (speed) { - case USB_SPEED_HIGH: /* green */ - val &= ~(1 << GPIO0_DATA); - val |= (1 << GPIO1_DATA); - break; - case USB_SPEED_FULL: /* red */ - val &= ~(1 << GPIO1_DATA); - val |= (1 << GPIO0_DATA); - break; - default: /* (off/black) */ - val &= ~((1 << GPIO1_DATA) | (1 << GPIO0_DATA)); - break; - } - writel (val, &dev->regs->gpioctl); -} - -/* indicate power with LED 2 */ -static inline void net2280_led_active (struct net2280 *dev, int is_active) -{ - u32 val = readl (&dev->regs->gpioctl); - - // FIXME this LED never seems to turn on. - if (is_active) - val |= GPIO2_DATA; - else - val &= ~GPIO2_DATA; - writel (val, &dev->regs->gpioctl); -} -static inline void net2280_led_shutdown (struct net2280 *dev) -{ - /* turn off all four GPIO*_DATA bits */ - writel (readl (&dev->regs->gpioctl) & ~0x0f, - &dev->regs->gpioctl); -} - -#else - -#define net2280_led_init(dev) do { } while (0) -#define net2280_led_speed(dev, speed) do { } while (0) -#define net2280_led_shutdown(dev) do { } while (0) - -#endif - -/*-------------------------------------------------------------------------*/ - -#define xprintk(dev,level,fmt,args...) \ - printk(level "%s %s: " fmt , driver_name , \ - pci_name(dev->pdev) , ## args) - -#ifdef DEBUG -#undef DEBUG -#define DEBUG(dev,fmt,args...) \ - xprintk(dev , KERN_DEBUG , fmt , ## args) -#else -#define DEBUG(dev,fmt,args...) \ - do { } while (0) -#endif /* DEBUG */ - -#ifdef VERBOSE -#define VDEBUG DEBUG -#else -#define VDEBUG(dev,fmt,args...) \ - do { } while (0) -#endif /* VERBOSE */ - -#define ERROR(dev,fmt,args...) \ - xprintk(dev , KERN_ERR , fmt , ## args) -#define WARNING(dev,fmt,args...) \ - xprintk(dev , KERN_WARNING , fmt , ## args) -#define INFO(dev,fmt,args...) \ - xprintk(dev , KERN_INFO , fmt , ## args) - -/*-------------------------------------------------------------------------*/ - -static inline void start_out_naking (struct net2280_ep *ep) -{ - /* NOTE: hardware races lurk here, and PING protocol issues */ - writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); - /* synch with device */ - readl (&ep->regs->ep_rsp); -} - -#ifdef DEBUG -static inline void assert_out_naking (struct net2280_ep *ep, const char *where) -{ - u32 tmp = readl (&ep->regs->ep_stat); - - if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) { - DEBUG (ep->dev, "%s %s %08x !NAK\n", - ep->ep.name, where, tmp); - writel ((1 << SET_NAK_OUT_PACKETS), - &ep->regs->ep_rsp); - } -} -#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep,__func__) -#else -#define ASSERT_OUT_NAKING(ep) do {} while (0) -#endif - -static inline void stop_out_naking (struct net2280_ep *ep) -{ - u32 tmp; - - tmp = readl (&ep->regs->ep_stat); - if ((tmp & (1 << NAK_OUT_PACKETS)) != 0) - writel ((1 << CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp); -} - -#endif /* __KERNEL__ */ |