1 files changed, 68 insertions, 2 deletions

diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index fff027d30a09..f1adcf8b2023 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -150,6 +150,39 @@ MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode");
 static void pxa2xx_ep_fifo_flush (struct usb_ep *ep);
 static void nuke (struct pxa2xx_ep *, int status);
 
+/* one GPIO should be used to detect VBUS from the host */
+static int is_vbus_present(void)
+{
+	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
+
+	if (mach->gpio_vbus)
+		return pxa_gpio_get(mach->gpio_vbus);
+	if (mach->udc_is_connected)
+		return mach->udc_is_connected();
+	return 1;
+}
+
+/* one GPIO should control a D+ pullup, so host sees this device (or not) */
+static void pullup_off(void)
+{
+	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
+
+	if (mach->gpio_pullup)
+		pxa_gpio_set(mach->gpio_pullup, 0);
+	else if (mach->udc_command)
+		mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+}
+
+static void pullup_on(void)
+{
+	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
+
+	if (mach->gpio_pullup)
+		pxa_gpio_set(mach->gpio_pullup, 1);
+	else if (mach->udc_command)
+		mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+}
+
 static void pio_irq_enable(int bEndpointAddress)
 {
         bEndpointAddress &= 0xf;
@@ -1721,6 +1754,16 @@ lubbock_vbus_irq(int irq, void *_dev, struct pt_regs *r)
 
 #endif
 
+static irqreturn_t
+udc_vbus_irq(int irq, void *_dev, struct pt_regs *r)
+{
+	struct pxa2xx_udc	*dev = _dev;
+	int			vbus = pxa_gpio_get(dev->mach->gpio_vbus);
+
+	pxa2xx_udc_vbus_session(&dev->gadget, vbus);
+	return IRQ_HANDLED;
+}
+
 
 /*-------------------------------------------------------------------------*/
 
@@ -2438,7 +2481,7 @@ static struct pxa2xx_udc memory = {
 static int __init pxa2xx_udc_probe(struct platform_device *pdev)
 {
 	struct pxa2xx_udc *dev = &memory;
-	int retval, out_dma = 1;
+	int retval, out_dma = 1, vbus_irq;
 	u32 chiprev;
 
 	/* insist on Intel/ARM/XScale */
@@ -2502,6 +2545,16 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
 	/* other non-static parts of init */
 	dev->dev = &pdev->dev;
 	dev->mach = pdev->dev.platform_data;
+	if (dev->mach->gpio_vbus) {
+		vbus_irq = IRQ_GPIO(dev->mach->gpio_vbus & GPIO_MD_MASK_NR);
+		pxa_gpio_mode((dev->mach->gpio_vbus & GPIO_MD_MASK_NR)
+				| GPIO_IN);
+		set_irq_type(vbus_irq, IRQT_BOTHEDGE);
+	} else
+		vbus_irq = 0;
+	if (dev->mach->gpio_pullup)
+		pxa_gpio_mode((dev->mach->gpio_pullup & GPIO_MD_MASK_NR)
+				| GPIO_OUT | GPIO_DFLT_LOW);
 
 	init_timer(&dev->timer);
 	dev->timer.function = udc_watchdog;
@@ -2557,8 +2610,19 @@ lubbock_fail0:
 		HEX_DISPLAY(dev->stats.irqs);
 		LUB_DISC_BLNK_LED &= 0xff;
 #endif
-	}
+	} else
 #endif
+	if (vbus_irq) {
+		retval = request_irq(vbus_irq, udc_vbus_irq,
+				SA_INTERRUPT | SA_SAMPLE_RANDOM,
+				driver_name, dev);
+		if (retval != 0) {
+			printk(KERN_ERR "%s: can't get irq %i, err %d\n",
+				driver_name, vbus_irq, retval);
+			free_irq(IRQ_USB, dev);
+			return -EBUSY;
+		}
+	}
 	create_proc_files();
 
 	return 0;
@@ -2587,6 +2651,8 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
 		free_irq(LUBBOCK_USB_IRQ, dev);
 	}
 #endif
+	if (dev->mach->gpio_vbus)
+		free_irq(IRQ_GPIO(dev->mach->gpio_vbus), dev);
 	platform_set_drvdata(pdev, NULL);
 	the_controller = NULL;
 	return 0;