diff options
Diffstat (limited to 'drivers/usb/gadget')
33 files changed, 1152 insertions, 4430 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 3557c7e5040d..ba18e9c110cc 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -157,7 +157,7 @@ config USB_AT91 config USB_LPC32XX tristate "LPC32XX USB Peripheral Controller" - depends on ARCH_LPC32XX + depends on ARCH_LPC32XX && I2C select USB_ISP1301 help This option selects the USB device controller in the LPC32xx SoC. @@ -226,7 +226,7 @@ config USB_GR_UDC config USB_OMAP tristate "OMAP USB Device Controller" depends on ARCH_OMAP1 - select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 + depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) help Many Texas Instruments OMAP processors have flexible full speed USB device controllers, with support for up to 30 @@ -300,12 +300,6 @@ config USB_PXA27X dynamically linked module called "pxa27x_udc" and force all gadget drivers to also be dynamically linked. -config USB_S3C_HSOTG - tristate "Designware/S3C HS/OtG USB Device controller" - help - The Designware USB2.0 high-speed gadget controller - integrated into many SoCs. - config USB_S3C2410 tristate "S3C2410 USB Device Controller" depends on ARCH_S3C24XX diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 5f150bc1b4bc..49514ea60a98 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -26,7 +26,6 @@ fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o obj-$(CONFIG_USB_M66592) += m66592-udc.o obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o -obj-$(CONFIG_USB_S3C_HSOTG) += s3c-hsotg.o obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o obj-$(CONFIG_USB_EG20T) += pch_udc.o diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 9f65324f9ae0..76023ce449a3 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1686,7 +1686,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) reset_all_endpoints(udc); if (udc->gadget.speed != USB_SPEED_UNKNOWN - && udc->driver->disconnect) { + && udc->driver && udc->driver->disconnect) { udc->gadget.speed = USB_SPEED_UNKNOWN; spin_unlock(&udc->lock); udc->driver->disconnect(&udc->gadget); diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index fab906429b80..f80151932053 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -21,6 +21,24 @@ #include <linux/usb/composite.h> #include <asm/unaligned.h> +#include "u_os_desc.h" + +/** + * struct usb_os_string - represents OS String to be reported by a gadget + * @bLength: total length of the entire descritor, always 0x12 + * @bDescriptorType: USB_DT_STRING + * @qwSignature: the OS String proper + * @bMS_VendorCode: code used by the host for subsequent requests + * @bPad: not used, must be zero + */ +struct usb_os_string { + __u8 bLength; + __u8 bDescriptorType; + __u8 qwSignature[OS_STRING_QW_SIGN_LEN]; + __u8 bMS_VendorCode; + __u8 bPad; +} __packed; + /* * The code in this file is utility code, used to build a gadget driver * from one or more "function" drivers, one or more "configuration" @@ -422,6 +440,7 @@ static int config_desc(struct usb_composite_dev *cdev, unsigned w_value) { struct usb_gadget *gadget = cdev->gadget; struct usb_configuration *c; + struct list_head *pos; u8 type = w_value >> 8; enum usb_device_speed speed = USB_SPEED_UNKNOWN; @@ -440,7 +459,20 @@ static int config_desc(struct usb_composite_dev *cdev, unsigned w_value) /* This is a lookup by config *INDEX* */ w_value &= 0xff; - list_for_each_entry(c, &cdev->configs, list) { + + pos = &cdev->configs; + c = cdev->os_desc_config; + if (c) + goto check_config; + + while ((pos = pos->next) != &cdev->configs) { + c = list_entry(pos, typeof(*c), list); + + /* skip OS Descriptors config which is handled separately */ + if (c == cdev->os_desc_config) + continue; + +check_config: /* ignore configs that won't work at this speed */ switch (speed) { case USB_SPEED_SUPER: @@ -634,6 +666,7 @@ static int set_config(struct usb_composite_dev *cdev, if (!c) goto done; + usb_gadget_set_state(gadget, USB_STATE_CONFIGURED); cdev->config = c; /* Initialize all interfaces by setting them to altsetting zero. */ @@ -960,6 +993,19 @@ static int get_string(struct usb_composite_dev *cdev, return s->bLength; } + if (cdev->use_os_string && language == 0 && id == OS_STRING_IDX) { + struct usb_os_string *b = buf; + b->bLength = sizeof(*b); + b->bDescriptorType = USB_DT_STRING; + compiletime_assert( + sizeof(b->qwSignature) == sizeof(cdev->qw_sign), + "qwSignature size must be equal to qw_sign"); + memcpy(&b->qwSignature, cdev->qw_sign, sizeof(b->qwSignature)); + b->bMS_VendorCode = cdev->b_vendor_code; + b->bPad = 0; + return sizeof(*b); + } + list_for_each_entry(uc, &cdev->gstrings, list) { struct usb_gadget_strings **sp; @@ -1206,6 +1252,156 @@ static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req) req->status, req->actual, req->length); } +static int count_ext_compat(struct usb_configuration *c) +{ + int i, res; + + res = 0; + for (i = 0; i < c->next_interface_id; ++i) { + struct usb_function *f; + int j; + + f = c->interface[i]; + for (j = 0; j < f->os_desc_n; ++j) { + struct usb_os_desc *d; + + if (i != f->os_desc_table[j].if_id) + continue; + d = f->os_desc_table[j].os_desc; + if (d && d->ext_compat_id) + ++res; + } + } + BUG_ON(res > 255); + return res; +} + +static void fill_ext_compat(struct usb_configuration *c, u8 *buf) +{ + int i, count; + + count = 16; + for (i = 0; i < c->next_interface_id; ++i) { + struct usb_function *f; + int j; + + f = c->interface[i]; + for (j = 0; j < f->os_desc_n; ++j) { + struct usb_os_desc *d; + + if (i != f->os_desc_table[j].if_id) + continue; + d = f->os_desc_table[j].os_desc; + if (d && d->ext_compat_id) { + *buf++ = i; + *buf++ = 0x01; + memcpy(buf, d->ext_compat_id, 16); + buf += 22; + } else { + ++buf; + *buf = 0x01; + buf += 23; + } + count += 24; + if (count >= 4096) + return; + } + } +} + +static int count_ext_prop(struct usb_configuration *c, int interface) +{ + struct usb_function *f; + int j; + + f = c->interface[interface]; + for (j = 0; j < f->os_desc_n; ++j) { + struct usb_os_desc *d; + + if (interface != f->os_desc_table[j].if_id) + continue; + d = f->os_desc_table[j].os_desc; + if (d && d->ext_compat_id) + return d->ext_prop_count; + } + return 0; +} + +static int len_ext_prop(struct usb_configuration *c, int interface) +{ + struct usb_function *f; + struct usb_os_desc *d; + int j, res; + + res = 10; /* header length */ + f = c->interface[interface]; + for (j = 0; j < f->os_desc_n; ++j) { + if (interface != f->os_desc_table[j].if_id) + continue; + d = f->os_desc_table[j].os_desc; + if (d) + return min(res + d->ext_prop_len, 4096); + } + return res; +} + +static int fill_ext_prop(struct usb_configuration *c, int interface, u8 *buf) +{ + struct usb_function *f; + struct usb_os_desc *d; + struct usb_os_desc_ext_prop *ext_prop; + int j, count, n, ret; + u8 *start = buf; + + f = c->interface[interface]; + for (j = 0; j < f->os_desc_n; ++j) { + if (interface != f->os_desc_table[j].if_id) + continue; + d = f->os_desc_table[j].os_desc; + if (d) + list_for_each_entry(ext_prop, &d->ext_prop, entry) { + /* 4kB minus header length */ + n = buf - start; + if (n >= 4086) + return 0; + + count = ext_prop->data_len + + ext_prop->name_len + 14; + if (count > 4086 - n) + return -EINVAL; + usb_ext_prop_put_size(buf, count); + usb_ext_prop_put_type(buf, ext_prop->type); + ret = usb_ext_prop_put_name(buf, ext_prop->name, + ext_prop->name_len); + if (ret < 0) + return ret; + switch (ext_prop->type) { + case USB_EXT_PROP_UNICODE: + case USB_EXT_PROP_UNICODE_ENV: + case USB_EXT_PROP_UNICODE_LINK: + usb_ext_prop_put_unicode(buf, ret, + ext_prop->data, + ext_prop->data_len); + break; + case USB_EXT_PROP_BINARY: + usb_ext_prop_put_binary(buf, ret, + ext_prop->data, + ext_prop->data_len); + break; + case USB_EXT_PROP_LE32: + /* not implemented */ + case USB_EXT_PROP_BE32: + /* not implemented */ + default: + return -EINVAL; + } + buf += count; + } + } + + return 0; +} + /* * The setup() callback implements all the ep0 functionality that's * not handled lower down, in hardware or the hardware driver(like @@ -1415,6 +1611,91 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) break; default: unknown: + /* + * OS descriptors handling + */ + if (cdev->use_os_string && cdev->os_desc_config && + (ctrl->bRequest & USB_TYPE_VENDOR) && + ctrl->bRequest == cdev->b_vendor_code) { + struct usb_request *req; + struct usb_configuration *os_desc_cfg; + u8 *buf; + int interface; + int count = 0; + + req = cdev->os_desc_req; + req->complete = composite_setup_complete; + buf = req->buf; + os_desc_cfg = cdev->os_desc_config; + memset(buf, 0, w_length); + buf[5] = 0x01; + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + if (w_index != 0x4 || (w_value >> 8)) + break; + buf[6] = w_index; + if (w_length == 0x10) { + /* Number of ext compat interfaces */ + count = count_ext_compat(os_desc_cfg); + buf[8] = count; + count *= 24; /* 24 B/ext compat desc */ + count += 16; /* header */ + put_unaligned_le32(count, buf); + value = w_length; + } else { + /* "extended compatibility ID"s */ + count = count_ext_compat(os_desc_cfg); + buf[8] = count; + count *= 24; /* 24 B/ext compat desc */ + count += 16; /* header */ + put_unaligned_le32(count, buf); + buf += 16; + fill_ext_compat(os_desc_cfg, buf); + value = w_length; + } + break; + case USB_RECIP_INTERFACE: + if (w_index != 0x5 || (w_value >> 8)) + break; + interface = w_value & 0xFF; + buf[6] = w_index; + if (w_length == 0x0A) { + count = count_ext_prop(os_desc_cfg, + interface); + put_unaligned_le16(count, buf + 8); + count = len_ext_prop(os_desc_cfg, + interface); + put_unaligned_le32(count, buf); + + value = w_length; + } else { + count = count_ext_prop(os_desc_cfg, + interface); + put_unaligned_le16(count, buf + 8); + count = len_ext_prop(os_desc_cfg, + interface); + put_unaligned_le32(count, buf); + buf += 10; + value = fill_ext_prop(os_desc_cfg, + interface, buf); + if (value < 0) + return value; + + value = w_length; + } + break; + } + req->length = value; + req->zero = value < w_length; + value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); + if (value < 0) { + DBG(cdev, "ep_queue --> %d\n", value); + req->status = 0; + composite_setup_complete(gadget->ep0, req); + } + return value; + } + VDBG(cdev, "non-core control req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, @@ -1638,6 +1919,29 @@ fail: return ret; } +int composite_os_desc_req_prepare(struct usb_composite_dev *cdev, + struct usb_ep *ep0) +{ + int ret = 0; + + cdev->os_desc_req = usb_ep_alloc_request(ep0, GFP_KERNEL); + if (!cdev->os_desc_req) { + ret = PTR_ERR(cdev->os_desc_req); + goto end; + } + + /* OS feature descriptor length <= 4kB */ + cdev->os_desc_req->buf = kmalloc(4096, GFP_KERNEL); + if (!cdev->os_desc_req->buf) { + ret = PTR_ERR(cdev->os_desc_req->buf); + kfree(cdev->os_desc_req); + goto end; + } + cdev->os_desc_req->complete = composite_setup_complete; +end: + return ret; +} + void composite_dev_cleanup(struct usb_composite_dev *cdev) { struct usb_gadget_string_container *uc, *tmp; @@ -1646,6 +1950,10 @@ void composite_dev_cleanup(struct usb_composite_dev *cdev) list_del(&uc->list); kfree(uc); } + if (cdev->os_desc_req) { + kfree(cdev->os_desc_req->buf); + usb_ep_free_request(cdev->gadget->ep0, cdev->os_desc_req); + } if (cdev->req) { kfree(cdev->req->buf); usb_ep_free_request(cdev->gadget->ep0, cdev->req); @@ -1683,6 +1991,12 @@ static int composite_bind(struct usb_gadget *gadget, if (status < 0) goto fail; + if (cdev->use_os_string) { + status = composite_os_desc_req_prepare(cdev, gadget->ep0); + if (status) + goto fail; + } + update_unchanged_dev_desc(&cdev->desc, composite->dev); /* has userspace failed to provide a serial number? */ diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 7d1cc01796b6..2ddcd635ca2a 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -2,9 +2,12 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/device.h> +#include <linux/nls.h> #include <linux/usb/composite.h> #include <linux/usb/gadget_configfs.h> #include "configfs.h" +#include "u_f.h" +#include "u_os_desc.h" int check_user_usb_string(const char *name, struct usb_gadget_strings *stringtab_dev) @@ -43,7 +46,8 @@ struct gadget_info { struct config_group functions_group; struct config_group configs_group; struct config_group strings_group; - struct config_group *default_groups[4]; + struct config_group os_desc_group; + struct config_group *default_groups[5]; struct mutex lock; struct usb_gadget_strings *gstrings[MAX_USB_STRING_LANGS + 1]; @@ -56,6 +60,9 @@ struct gadget_info { #endif struct usb_composite_driver composite; struct usb_composite_dev cdev; + bool use_os_desc; + char b_vendor_code; + char qw_sign[OS_STRING_QW_SIGN_LEN]; }; struct config_usb_cfg { @@ -79,6 +86,10 @@ struct gadget_strings { struct list_head list; }; +struct os_desc { + struct config_group group; +}; + struct gadget_config_name { struct usb_gadget_strings stringtab_dev; struct usb_string strings; @@ -736,6 +747,525 @@ static void gadget_strings_attr_release(struct config_item *item) USB_CONFIG_STRING_RW_OPS(gadget_strings); USB_CONFIG_STRINGS_LANG(gadget_strings, gadget_info); +static inline struct os_desc *to_os_desc(struct config_item *item) +{ + return container_of(to_config_group(item), struct os_desc, group); +} + +CONFIGFS_ATTR_STRUCT(os_desc); +CONFIGFS_ATTR_OPS(os_desc); + +static ssize_t os_desc_use_show(struct os_desc *os_desc, char *page) +{ + struct gadget_info *gi; + + gi = to_gadget_info(os_desc->group.cg_item.ci_parent); + + return sprintf(page, "%d", gi->use_os_desc); +} + +static ssize_t os_desc_use_store(struct os_desc *os_desc, const char *page, + size_t len) +{ + struct gadget_info *gi; + int ret; + bool use; + + gi = to_gadget_info(os_desc->group.cg_item.ci_parent); + + mutex_lock(&gi->lock); + ret = strtobool(page, &use); + if (!ret) { + gi->use_os_desc = use; + ret = len; + } + mutex_unlock(&gi->lock); + + return ret; +} + +static struct os_desc_attribute os_desc_use = + __CONFIGFS_ATTR(use, S_IRUGO | S_IWUSR, + os_desc_use_show, + os_desc_use_store); + +static ssize_t os_desc_b_vendor_code_show(struct os_desc *os_desc, char *page) +{ + struct gadget_info *gi; + + gi = to_gadget_info(os_desc->group.cg_item.ci_parent); + + return sprintf(page, "%d", gi->b_vendor_code); +} + +static ssize_t os_desc_b_vendor_code_store(struct os_desc *os_desc, + const char *page, size_t len) +{ + struct gadget_info *gi; + int ret; + u8 b_vendor_code; + + gi = to_gadget_info(os_desc->group.cg_item.ci_parent); + + mutex_lock(&gi->lock); + ret = kstrtou8(page, 0, &b_vendor_code); + if (!ret) { + gi->b_vendor_code = b_vendor_code; + ret = len; + } + mutex_unlock(&gi->lock); + + return ret; +} + +static struct os_desc_attribute os_desc_b_vendor_code = + __CONFIGFS_ATTR(b_vendor_code, S_IRUGO | S_IWUSR, + os_desc_b_vendor_code_show, + os_desc_b_vendor_code_store); + +static ssize_t os_desc_qw_sign_show(struct os_desc *os_desc, char *page) +{ + struct gadget_info *gi; + + gi = to_gadget_info(os_desc->group.cg_item.ci_parent); + + memcpy(page, gi->qw_sign, OS_STRING_QW_SIGN_LEN); + + return OS_STRING_QW_SIGN_LEN; +} + +static ssize_t os_desc_qw_sign_store(struct os_desc *os_desc, const char *page, + size_t len) +{ + struct gadget_info *gi; + int res, l; + + gi = to_gadget_info(os_desc->group.cg_item.ci_parent); + l = min((int)len, OS_STRING_QW_SIGN_LEN >> 1); + if (page[l - 1] == '\n') + --l; + + mutex_lock(&gi->lock); + res = utf8s_to_utf16s(page, l, + UTF16_LITTLE_ENDIAN, (wchar_t *) gi->qw_sign, + OS_STRING_QW_SIGN_LEN); + if (res > 0) + res = len; + mutex_unlock(&gi->lock); + + return res; +} + +static struct os_desc_attribute os_desc_qw_sign = + __CONFIGFS_ATTR(qw_sign, S_IRUGO | S_IWUSR, + os_desc_qw_sign_show, + os_desc_qw_sign_store); + +static struct configfs_attribute *os_desc_attrs[] = { + &os_desc_use.attr, + &os_desc_b_vendor_code.attr, + &os_desc_qw_sign.attr, + NULL, +}; + +static void os_desc_attr_release(struct config_item *item) +{ + struct os_desc *os_desc = to_os_desc(item); + kfree(os_desc); +} + +static int os_desc_link(struct config_item *os_desc_ci, + struct config_item *usb_cfg_ci) +{ + struct gadget_info *gi = container_of(to_config_group(os_desc_ci), + struct gadget_info, os_desc_group); + struct usb_composite_dev *cdev = &gi->cdev; + struct config_usb_cfg *c_target = + container_of(to_config_group(usb_cfg_ci), + struct config_usb_cfg, group); + struct usb_configuration *c; + int ret; + + mutex_lock(&gi->lock); + list_for_each_entry(c, &cdev->configs, list) { + if (c == &c_target->c) + break; + } + if (c != &c_target->c) { + ret = -EINVAL; + goto out; + } + + if (cdev->os_desc_config) { + ret = -EBUSY; + goto out; + } + + cdev->os_desc_config = &c_target->c; + ret = 0; + +out: + mutex_unlock(&gi->lock); + return ret; +} + +static int os_desc_unlink(struct config_item *os_desc_ci, + struct config_item *usb_cfg_ci) +{ + struct gadget_info *gi = container_of(to_config_group(os_desc_ci), + struct gadget_info, os_desc_group); + struct usb_composite_dev *cdev = &gi->cdev; + + mutex_lock(&gi->lock); + if (gi->udc_name) + unregister_gadget(gi); + cdev->os_desc_config = NULL; + WARN_ON(gi->udc_name); + mutex_unlock(&gi->lock); + return 0; +} + +static struct configfs_item_operations os_desc_ops = { + .release = os_desc_attr_release, + .show_attribute = os_desc_attr_show, + .store_attribute = os_desc_attr_store, + .allow_link = os_desc_link, + .drop_link = os_desc_unlink, +}; + +static struct config_item_type os_desc_type = { + .ct_item_ops = &os_desc_ops, + .ct_attrs = os_desc_attrs, + .ct_owner = THIS_MODULE, +}; + +CONFIGFS_ATTR_STRUCT(usb_os_desc); +CONFIGFS_ATTR_OPS(usb_os_desc); + + +static inline struct usb_os_desc_ext_prop +*to_usb_os_desc_ext_prop(struct config_item *item) +{ + return container_of(item, struct usb_os_desc_ext_prop, item); +} + +CONFIGFS_ATTR_STRUCT(usb_os_desc_ext_prop); +CONFIGFS_ATTR_OPS(usb_os_desc_ext_prop); + +static ssize_t ext_prop_type_show(struct usb_os_desc_ext_prop *ext_prop, + char *page) +{ + return sprintf(page, "%d", ext_prop->type); +} + +static ssize_t ext_prop_type_store(struct usb_os_desc_ext_prop *ext_prop, + const char *page, size_t len) +{ + struct usb_os_desc *desc = to_usb_os_desc(ext_prop->item.ci_parent); + u8 type; + int ret; + + if (desc->opts_mutex) + mutex_lock(desc->opts_mutex); + ret = kstrtou8(page, 0, &type); + if (ret) + goto end; + if (type < USB_EXT_PROP_UNICODE || type > USB_EXT_PROP_UNICODE_MULTI) { + ret = -EINVAL; + goto end; + } + + if ((ext_prop->type == USB_EXT_PROP_BINARY || + ext_prop->type == USB_EXT_PROP_LE32 || + ext_prop->type == USB_EXT_PROP_BE32) && + (type == USB_EXT_PROP_UNICODE || + type == USB_EXT_PROP_UNICODE_ENV || + type == USB_EXT_PROP_UNICODE_LINK)) + ext_prop->data_len <<= 1; + else if ((ext_prop->type == USB_EXT_PROP_UNICODE || + ext_prop->type == USB_EXT_PROP_UNICODE_ENV || + ext_prop->type == USB_EXT_PROP_UNICODE_LINK) && + (type == USB_EXT_PROP_BINARY || + type == USB_EXT_PROP_LE32 || + type == USB_EXT_PROP_BE32)) + ext_prop->data_len >>= 1; + ext_prop->type = type; + ret = len; + +end: + if (desc->opts_mutex) + mutex_unlock(desc->opts_mutex); + return ret; +} + +static ssize_t ext_prop_data_show(struct usb_os_desc_ext_prop *ext_prop, + char *page) +{ + int len = ext_prop->data_len; + + if (ext_prop->type == USB_EXT_PROP_UNICODE || + ext_prop->type == USB_EXT_PROP_UNICODE_ENV || + ext_prop->type == USB_EXT_PROP_UNICODE_LINK) + len >>= 1; + memcpy(page, ext_prop->data, len); + + return len; +} + +static ssize_t ext_prop_data_store(struct usb_os_desc_ext_prop *ext_prop, + const char *page, size_t len) +{ + struct usb_os_desc *desc = to_usb_os_desc(ext_prop->item.ci_parent); + char *new_data; + size_t ret_len = len; + + if (page[len - 1] == '\n' || page[len - 1] == '\0') + --len; + new_data = kzalloc(len, GFP_KERNEL); + if (!new_data) + return -ENOMEM; + + memcpy(new_data, page, len); + + if (desc->opts_mutex) + mutex_lock(desc->opts_mutex); + kfree(ext_prop->data); + ext_prop->data = new_data; + desc->ext_prop_len -= ext_prop->data_len; + ext_prop->data_len = len; + desc->ext_prop_len += ext_prop->data_len; + if (ext_prop->type == USB_EXT_PROP_UNICODE || + ext_prop->type == USB_EXT_PROP_UNICODE_ENV || + ext_prop->type == USB_EXT_PROP_UNICODE_LINK) { + desc->ext_prop_len -= ext_prop->data_len; + ext_prop->data_len <<= 1; + ext_prop->data_len += 2; + desc->ext_prop_len += ext_prop->data_len; + } + if (desc->opts_mutex) + mutex_unlock(desc->opts_mutex); + return ret_len; +} + +static struct usb_os_desc_ext_prop_attribute ext_prop_type = + __CONFIGFS_ATTR(type, S_IRUGO | S_IWUSR, + ext_prop_type_show, ext_prop_type_store); + +static struct usb_os_desc_ext_prop_attribute ext_prop_data = + __CONFIGFS_ATTR(data, S_IRUGO | S_IWUSR, + ext_prop_data_show, ext_prop_data_store); + +static struct configfs_attribute *ext_prop_attrs[] = { + &ext_prop_type.attr, + &ext_prop_data.attr, + NULL, +}; + +static void usb_os_desc_ext_prop_release(struct config_item *item) +{ + struct usb_os_desc_ext_prop *ext_prop = to_usb_os_desc_ext_prop(item); + + kfree(ext_prop); /* frees a whole chunk */ +} + +static struct configfs_item_operations ext_prop_ops = { + .release = usb_os_desc_ext_prop_release, + .show_attribute = usb_os_desc_ext_prop_attr_show, + .store_attribute = usb_os_desc_ext_prop_attr_store, +}; + +static struct config_item *ext_prop_make( + struct config_group *group, + const char *name) +{ + struct usb_os_desc_ext_prop *ext_prop; + struct config_item_type *ext_prop_type; + struct usb_os_desc *desc; + char *vlabuf; + + vla_group(data_chunk); + vla_item(data_chunk, struct usb_os_desc_ext_prop, ext_prop, 1); + vla_item(data_chunk, struct config_item_type, ext_prop_type, 1); + + vlabuf = kzalloc(vla_group_size(data_chunk), GFP_KERNEL); + if (!vlabuf) + return ERR_PTR(-ENOMEM); + + ext_prop = vla_ptr(vlabuf, data_chunk, ext_prop); + ext_prop_type = vla_ptr(vlabuf, data_chunk, ext_prop_type); + + desc = container_of(group, struct usb_os_desc, group); + ext_prop_type->ct_item_ops = &ext_prop_ops; + ext_prop_type->ct_attrs = ext_prop_attrs; + ext_prop_type->ct_owner = desc->owner; + + config_item_init_type_name(&ext_prop->item, name, ext_prop_type); + + ext_prop->name = kstrdup(name, GFP_KERNEL); + if (!ext_prop->name) { + kfree(vlabuf); + return ERR_PTR(-ENOMEM); + } + desc->ext_prop_len += 14; + ext_prop->name_len = 2 * strlen(ext_prop->name) + 2; + if (desc->opts_mutex) + mutex_lock(desc->opts_mutex); + desc->ext_prop_len += ext_prop->name_len; + list_add_tail(&ext_prop->entry, &desc->ext_prop); + ++desc->ext_prop_count; + if (desc->opts_mutex) + mutex_unlock(desc->opts_mutex); + + return &ext_prop->item; +} + +static void ext_prop_drop(struct config_group *group, struct config_item *item) +{ + struct usb_os_desc_ext_prop *ext_prop = to_usb_os_desc_ext_prop(item); + struct usb_os_desc *desc = to_usb_os_desc(&group->cg_item); + + if (desc->opts_mutex) + mutex_lock(desc->opts_mutex); + list_del(&ext_prop->entry); + --desc->ext_prop_count; + kfree(ext_prop->name); + desc->ext_prop_len -= (ext_prop->name_len + ext_prop->data_len + 14); + if (desc->opts_mutex) + mutex_unlock(desc->opts_mutex); + config_item_put(item); +} + +static struct configfs_group_operations interf_grp_ops = { + .make_item = &ext_prop_make, + .drop_item = &ext_prop_drop, +}; + +static struct configfs_item_operations interf_item_ops = { + .show_attribute = usb_os_desc_attr_show, + .store_attribute = usb_os_desc_attr_store, +}; + +static ssize_t rndis_grp_compatible_id_show(struct usb_os_desc *desc, + char *page) +{ + memcpy(page, desc->ext_compat_id, 8); + return 8; +} + +static ssize_t rndis_grp_compatible_id_store(struct usb_os_desc *desc, + const char *page, size_t len) +{ + int l; + + l = min_t(int, 8, len); + if (page[l - 1] == '\n') + --l; + if (desc->opts_mutex) + mutex_lock(desc->opts_mutex); + memcpy(desc->ext_compat_id, page, l); + desc->ext_compat_id[l] = '\0'; + + if (desc->opts_mutex) + mutex_unlock(desc->opts_mutex); + + return len; +} + +static struct usb_os_desc_attribute rndis_grp_attr_compatible_id = + __CONFIGFS_ATTR(compatible_id, S_IRUGO | S_IWUSR, + rndis_grp_compatible_id_show, + rndis_grp_compatible_id_store); + +static ssize_t rndis_grp_sub_compatible_id_show(struct usb_os_desc *desc, + char *page) +{ + memcpy(page, desc->ext_compat_id + 8, 8); + return 8; +} + +static ssize_t rndis_grp_sub_compatible_id_store(struct usb_os_desc *desc, + const char *page, size_t len) +{ + int l; + + l = min_t(int, 8, len); + if (page[l - 1] == '\n') + --l; + if (desc->opts_mutex) + mutex_lock(desc->opts_mutex); + memcpy(desc->ext_compat_id + 8, page, l); + desc->ext_compat_id[l + 8] = '\0'; + + if (desc->opts_mutex) + mutex_unlock(desc->opts_mutex); + + return len; +} + +static struct usb_os_desc_attribute rndis_grp_attr_sub_compatible_id = + __CONFIGFS_ATTR(sub_compatible_id, S_IRUGO | S_IWUSR, + rndis_grp_sub_compatible_id_show, + rndis_grp_sub_compatible_id_store); + +static struct configfs_attribute *interf_grp_attrs[] = { + &rndis_grp_attr_compatible_id.attr, + &rndis_grp_attr_sub_compatible_id.attr, + NULL +}; + +int usb_os_desc_prepare_interf_dir(struct config_group *parent, + int n_interf, + struct usb_os_desc **desc, + struct module *owner) +{ + struct config_group **f_default_groups, *os_desc_group, + **interface_groups; + struct config_item_type *os_desc_type, *interface_type; + + vla_group(data_chunk); + vla_item(data_chunk, struct config_group *, f_default_groups, 2); + vla_item(data_chunk, struct config_group, os_desc_group, 1); + vla_item(data_chunk, struct config_group *, interface_groups, + n_interf + 1); + vla_item(data_chunk, struct config_item_type, os_desc_type, 1); + vla_item(data_chunk, struct config_item_type, interface_type, 1); + + char *vlabuf = kzalloc(vla_group_size(data_chunk), GFP_KERNEL); + if (!vlabuf) + return -ENOMEM; + + f_default_groups = vla_ptr(vlabuf, data_chunk, f_default_groups); + os_desc_group = vla_ptr(vlabuf, data_chunk, os_desc_group); + os_desc_type = vla_ptr(vlabuf, data_chunk, os_desc_type); + interface_groups = vla_ptr(vlabuf, data_chunk, interface_groups); + interface_type = vla_ptr(vlabuf, data_chunk, interface_type); + + parent->default_groups = f_default_groups; + os_desc_type->ct_owner = owner; + config_group_init_type_name(os_desc_group, "os_desc", os_desc_type); + f_default_groups[0] = os_desc_group; + + os_desc_group->default_groups = interface_groups; + interface_type->ct_item_ops = &interf_item_ops; + interface_type->ct_group_ops = &interf_grp_ops; + interface_type->ct_attrs = interf_grp_attrs; + interface_type->ct_owner = owner; + + while (n_interf--) { + struct usb_os_desc *d; + + d = desc[n_interf]; + d->owner = owner; + config_group_init_type_name(&d->group, "", interface_type); + config_item_set_name(&d->group.cg_item, "interface.%d", + n_interf); + interface_groups[n_interf] = &d->group; + } + + return 0; +} +EXPORT_SYMBOL(usb_os_desc_prepare_interf_dir); + static int configfs_do_nothing(struct usb_composite_dev *cdev) { WARN_ON(1); @@ -745,6 +1275,9 @@ static int configfs_do_nothing(struct usb_composite_dev *cdev) int composite_dev_prepare(struct usb_composite_driver *composite, struct usb_composite_dev *dev); +int composite_os_desc_req_prepare(struct usb_composite_dev *cdev, + struct usb_ep *ep0); + static void purge_configs_funcs(struct gadget_info *gi) { struct usb_configuration *c; @@ -793,7 +1326,7 @@ static int configfs_composite_bind(struct usb_gadget *gadget, ret = -EINVAL; if (list_empty(&gi->cdev.configs)) { - pr_err("Need atleast one configuration in %s.\n", + pr_err("Need at least one configuration in %s.\n", gi->composite.name); goto err_comp_cleanup; } @@ -804,7 +1337,7 @@ static int configfs_composite_bind(struct usb_gadget *gadget, cfg = container_of(c, struct config_usb_cfg, c); if (list_empty(&cfg->func_list)) { - pr_err("Config %s/%d of %s needs atleast one function.\n", + pr_err("Config %s/%d of %s needs at least one function.\n", c->label, c->bConfigurationValue, gi->composite.name); goto err_comp_cleanup; @@ -839,6 +1372,12 @@ static int configfs_composite_bind(struct usb_gadget *gadget, gi->cdev.desc.iSerialNumber = s[USB_GADGET_SERIAL_IDX].id; } + if (gi->use_os_desc) { + cdev->use_os_string = true; + cdev->b_vendor_code = gi->b_vendor_code; + memcpy(cdev->qw_sign, gi->qw_sign, OS_STRING_QW_SIGN_LEN); + } + /* Go through all configs, attach all functions */ list_for_each_entry(c, &gi->cdev.configs, list) { struct config_usb_cfg *cfg; @@ -874,6 +1413,12 @@ static int configfs_composite_bind(struct usb_gadget *gadget, } usb_ep_autoconfig_reset(cdev->gadget); } + if (cdev->use_os_string) { + ret = composite_os_desc_req_prepare(cdev, gadget->ep0); + if (ret) + goto err_purge_funcs; + } + usb_ep_autoconfig_reset(cdev->gadget); return 0; @@ -929,6 +1474,7 @@ static struct config_group *gadgets_make( gi->group.default_groups[0] = &gi->functions_group; gi->group.default_groups[1] = &gi->configs_group; gi->group.default_groups[2] = &gi->strings_group; + gi->group.default_groups[3] = &gi->os_desc_group; config_group_init_type_name(&gi->functions_group, "functions", &functions_type); @@ -936,6 +1482,8 @@ static struct config_group *gadgets_make( &config_desc_type); config_group_init_type_name(&gi->strings_group, "strings", &gadget_strings_strings_type); + config_group_init_type_name(&gi->os_desc_group, "os_desc", + &os_desc_type); gi->composite.bind = configfs_do_nothing; gi->composite.unbind = configfs_do_nothing; @@ -1005,7 +1553,7 @@ void unregister_gadget_item(struct config_item *item) unregister_gadget(gi); } -EXPORT_SYMBOL(unregister_gadget_item); +EXPORT_SYMBOL_GPL(unregister_gadget_item); static int __init gadget_cfs_init(void) { diff --git a/drivers/usb/gadget/configfs.h b/drivers/usb/gadget/configfs.h index a7b564a913d1..a14ac792c698 100644 --- a/drivers/usb/gadget/configfs.h +++ b/drivers/usb/gadget/configfs.h @@ -1,6 +1,18 @@ #ifndef USB__GADGET__CONFIGFS__H #define USB__GADGET__CONFIGFS__H +#include <linux/configfs.h> + void unregister_gadget_item(struct config_item *item); +int usb_os_desc_prepare_interf_dir(struct config_group *parent, + int n_interf, + struct usb_os_desc **desc, + struct module *owner); + +static inline struct usb_os_desc *to_usb_os_desc(struct config_item *item) +{ + return container_of(to_config_group(item), struct usb_os_desc, group); +} + #endif /* USB__GADGET__CONFIGFS__H */ diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 8c06430dcc47..2b54955d3166 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -561,7 +561,6 @@ static int dummy_disable(struct usb_ep *_ep) struct dummy_ep *ep; struct dummy *dum; unsigned long flags; - int retval; ep = usb_ep_to_dummy_ep(_ep); if (!_ep || !ep->desc || _ep->name == ep0name) @@ -571,12 +570,11 @@ static int dummy_disable(struct usb_ep *_ep) spin_lock_irqsave(&dum->lock, flags); ep->desc = NULL; ep->stream_en = 0; - retval = 0; nuke(dum, ep); spin_unlock_irqrestore(&dum->lock, flags); dev_dbg(udc_dev(dum), "disabled %s\n", _ep->name); - return retval; + return 0; } static struct usb_request *dummy_alloc_request(struct usb_ep *_ep, diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 1e12b3ee56fd..74202d67f911 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -33,36 +33,11 @@ #include <linux/poll.h> #include "u_fs.h" +#include "u_f.h" #include "configfs.h" #define FUNCTIONFS_MAGIC 0xa647361 /* Chosen by a honest dice roll ;) */ -/* Variable Length Array Macros **********************************************/ -#define vla_group(groupname) size_t groupname##__next = 0 -#define vla_group_size(groupname) groupname##__next - -#define vla_item(groupname, type, name, n) \ - size_t groupname##_##name##__offset = ({ \ - size_t align_mask = __alignof__(type) - 1; \ - size_t offset = (groupname##__next + align_mask) & ~align_mask;\ - size_t size = (n) * sizeof(type); \ - groupname##__next = offset + size; \ - offset; \ - }) - -#define vla_item_with_sz(groupname, type, name, n) \ - size_t groupname##_##name##__sz = (n) * sizeof(type); \ - size_t groupname##_##name##__offset = ({ \ - size_t align_mask = __alignof__(type) - 1; \ - size_t offset = (groupname##__next + align_mask) & ~align_mask;\ - size_t size = groupname##_##name##__sz; \ - groupname##__next = offset + size; \ - offset; \ - }) - -#define vla_ptr(ptr, groupname, name) \ - ((void *) ((char *)ptr + groupname##_##name##__offset)) - /* Reference counter handling */ static void ffs_data_get(struct ffs_data *ffs); static void ffs_data_put(struct ffs_data *ffs); @@ -190,7 +165,7 @@ ffs_sb_create_file(struct super_block *sb, const char *name, void *data, /* Devices management *******************************************************/ DEFINE_MUTEX(ffs_lock); -EXPORT_SYMBOL(ffs_lock); +EXPORT_SYMBOL_GPL(ffs_lock); static struct ffs_dev *_ffs_find_dev(const char *name); static struct ffs_dev *_ffs_alloc_dev(void); @@ -2883,7 +2858,7 @@ int ffs_name_dev(struct ffs_dev *dev, const char *name) return ret; } -EXPORT_SYMBOL(ffs_name_dev); +EXPORT_SYMBOL_GPL(ffs_name_dev); int ffs_single_dev(struct ffs_dev *dev) { @@ -2900,7 +2875,7 @@ int ffs_single_dev(struct ffs_dev *dev) ffs_dev_unlock(); return ret; } -EXPORT_SYMBOL(ffs_single_dev); +EXPORT_SYMBOL_GPL(ffs_single_dev); /* * ffs_lock must be taken by the caller of this function diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 9a4f49dc6ac4..eed3ad878047 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -27,6 +27,7 @@ #include "u_ether_configfs.h" #include "u_rndis.h" #include "rndis.h" +#include "configfs.h" /* * This function is an RNDIS Ethernet port -- a Microsoft protocol that's @@ -682,6 +683,15 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) rndis_opts = container_of(f->fi, struct f_rndis_opts, func_inst); + if (cdev->use_os_string) { + f->os_desc_table = kzalloc(sizeof(*f->os_desc_table), + GFP_KERNEL); + if (!f->os_desc_table) + return PTR_ERR(f->os_desc_table); + f->os_desc_n = 1; + f->os_desc_table[0].os_desc = &rndis_opts->rndis_os_desc; + } + /* * in drivers/usb/gadget/configfs.c:configfs_composite_bind() * configurations are bound in sequence with list_for_each_entry, @@ -693,14 +703,16 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) gether_set_gadget(rndis_opts->net, cdev->gadget); status = gether_register_netdev(rndis_opts->net); if (status) - return status; + goto fail; rndis_opts->bound = true; } us = usb_gstrings_attach(cdev, rndis_strings, ARRAY_SIZE(rndis_string_defs)); - if (IS_ERR(us)) - return PTR_ERR(us); + if (IS_ERR(us)) { + status = PTR_ERR(us); + goto fail; + } rndis_control_intf.iInterface = us[0].id; rndis_data_intf.iInterface = us[1].id; rndis_iad_descriptor.iFunction = us[2].id; @@ -802,6 +814,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) return 0; fail: + kfree(f->os_desc_table); + f->os_desc_n = 0; usb_free_all_descriptors(f); if (rndis->notify_req) { @@ -834,7 +848,7 @@ void rndis_borrow_net(struct usb_function_instance *f, struct net_device *net) opts->borrowed_net = opts->bound = true; opts->net = net; } -EXPORT_SYMBOL(rndis_borrow_net); +EXPORT_SYMBOL_GPL(rndis_borrow_net); static inline struct f_rndis_opts *to_f_rndis_opts(struct config_item *item) { @@ -882,16 +896,21 @@ static void rndis_free_inst(struct usb_function_instance *f) else free_netdev(opts->net); } + + kfree(opts->rndis_os_desc.group.default_groups); /* single VLA chunk */ kfree(opts); } static struct usb_function_instance *rndis_alloc_inst(void) { struct f_rndis_opts *opts; + struct usb_os_desc *descs[1]; opts = kzalloc(sizeof(*opts), GFP_KERNEL); if (!opts) return ERR_PTR(-ENOMEM); + opts->rndis_os_desc.ext_compat_id = opts->rndis_ext_compat_id; + mutex_init(&opts->lock); opts->func_inst.free_func_inst = rndis_free_inst; opts->net = gether_setup_default(); @@ -900,7 +919,11 @@ static struct usb_function_instance *rndis_alloc_inst(void) kfree(opts); return ERR_CAST(net); } + INIT_LIST_HEAD(&opts->rndis_os_desc.ext_prop); + descs[0] = &opts->rndis_os_desc; + usb_os_desc_prepare_interf_dir(&opts->func_inst.group, 1, descs, + THIS_MODULE); config_group_init_type_name(&opts->func_inst.group, "", &rndis_func_type); @@ -925,6 +948,8 @@ static void rndis_unbind(struct usb_configuration *c, struct usb_function *f) { struct f_rndis *rndis = func_to_rndis(f); + kfree(f->os_desc_table); + f->os_desc_n = 0; usb_free_all_descriptors(f); kfree(rndis->notify_req->buf); diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index df4a0dcbc993..1ea8baf33333 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -276,7 +276,7 @@ static int geth_set_alt(struct usb_function *f, unsigned intf, unsigned alt) } net = gether_connect(&geth->port); - return PTR_RET(net); + return PTR_ERR_OR_ZERO(net); } static void geth_disable(struct usb_function *f) diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c index bc23040c7790..6261db4a9910 100644 --- a/drivers/usb/gadget/f_uac2.c +++ b/drivers/usb/gadget/f_uac2.c @@ -196,7 +196,7 @@ agdev_iso_complete(struct usb_ep *ep, struct usb_request *req) struct snd_uac2_chip *uac2 = prm->uac2; /* i/f shutting down */ - if (!prm->ep_enabled) + if (!prm->ep_enabled || req->status == -ESHUTDOWN) return; /* @@ -974,8 +974,6 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL); if (!prm->rbuf) { prm->max_psize = 0; - dev_err(&uac2->pdev.dev, - "%s:%d Error!\n", __func__, __LINE__); goto err; } @@ -984,8 +982,6 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL); if (!prm->rbuf) { prm->max_psize = 0; - dev_err(&uac2->pdev.dev, - "%s:%d Error!\n", __func__, __LINE__); goto err; } @@ -1298,10 +1294,8 @@ static int audio_bind_config(struct usb_configuration *cfg) int res; agdev_g = kzalloc(sizeof *agdev_g, GFP_KERNEL); - if (agdev_g == NULL) { - printk(KERN_ERR "Unable to allocate audio gadget\n"); + if (agdev_g == NULL) return -ENOMEM; - } res = usb_string_ids_tab(cfg->cdev, strings_fn); if (res) diff --git a/drivers/usb/gadget/fotg210-udc.c b/drivers/usb/gadget/fotg210-udc.c index 2d0305280e8c..e143d69f6017 100644 --- a/drivers/usb/gadget/fotg210-udc.c +++ b/drivers/usb/gadget/fotg210-udc.c @@ -1112,17 +1112,13 @@ static int fotg210_udc_probe(struct platform_device *pdev) /* initialize udc */ fotg210 = kzalloc(sizeof(struct fotg210_udc), GFP_KERNEL); - if (fotg210 == NULL) { - pr_err("kzalloc error\n"); + if (fotg210 == NULL) goto err_alloc; - } for (i = 0; i < FOTG210_MAX_NUM_EP; i++) { _ep[i] = kzalloc(sizeof(struct fotg210_ep), GFP_KERNEL); - if (_ep[i] == NULL) { - pr_err("_ep kzalloc error\n"); + if (_ep[i] == NULL) goto err_alloc; - } fotg210->ep[i] = _ep[i]; } diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index a2f26cdb56fe..28e4fc957026 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2256,10 +2256,8 @@ static int __init struct_udc_setup(struct fsl_udc *udc, udc->phy_mode = pdata->phy_mode; udc->eps = kzalloc(sizeof(struct fsl_ep) * udc->max_ep, GFP_KERNEL); - if (!udc->eps) { - ERR("malloc fsl_ep failed\n"); + if (!udc->eps) return -1; - } /* initialized QHs, take care of alignment */ size = udc->max_ep * sizeof(struct ep_queue_head); @@ -2342,10 +2340,8 @@ static int __init fsl_udc_probe(struct platform_device *pdev) u32 dccparams; udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL); - if (udc_controller == NULL) { - ERR("malloc udc failed\n"); + if (udc_controller == NULL) return -ENOMEM; - } pdata = dev_get_platdata(&pdev->dev); udc_controller->pdata = pdata; diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index 6423f1840ed9..3deb4e938071 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -1400,17 +1400,13 @@ static int __init fusb300_probe(struct platform_device *pdev) /* initialize udc */ fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL); - if (fusb300 == NULL) { - pr_err("kzalloc error\n"); + if (fusb300 == NULL) goto clean_up; - } for (i = 0; i < FUSB300_MAX_NUM_EP; i++) { _ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL); - if (_ep[i] == NULL) { - pr_err("_ep kzalloc error\n"); + if (_ep[i] == NULL) goto clean_up; - } fusb300->ep[i] = _ep[i]; } diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/gr_udc.c index f984ee75324d..99a37ed03e27 100644 --- a/drivers/usb/gadget/gr_udc.c +++ b/drivers/usb/gadget/gr_udc.c @@ -143,6 +143,7 @@ static void gr_seq_ep_show(struct seq_file *seq, struct gr_ep *ep) seq_printf(seq, " wedged = %d\n", ep->wedged); seq_printf(seq, " callback = %d\n", ep->callback); seq_printf(seq, " maxpacket = %d\n", ep->ep.maxpacket); + seq_printf(seq, " maxpacket_limit = %d\n", ep->ep.maxpacket_limit); seq_printf(seq, " bytes_per_buffer = %d\n", ep->bytes_per_buffer); if (mode == 1 || mode == 3) seq_printf(seq, " nt = %d\n", @@ -1541,6 +1542,10 @@ static int gr_ep_enable(struct usb_ep *_ep, } else if (max == 0) { dev_err(dev->dev, "Max payload cannot be set to 0\n"); return -EINVAL; + } else if (max > ep->ep.maxpacket_limit) { + dev_err(dev->dev, "Requested max payload %d > limit %d\n", + max, ep->ep.maxpacket_limit); + return -EINVAL; } spin_lock(&ep->dev->lock); @@ -1679,7 +1684,7 @@ static int gr_queue_ext(struct usb_ep *_ep, struct usb_request *_req, if (ep->is_in) gr_dbgprint_request("EXTERN", ep, req); - ret = gr_queue(ep, req, gfp_flags); + ret = gr_queue(ep, req, GFP_ATOMIC); spin_unlock(&ep->dev->lock); @@ -1985,8 +1990,8 @@ static int gr_ep_init(struct gr_udc *dev, int num, int is_in, u32 maxplimit) INIT_LIST_HEAD(&ep->queue); if (num == 0) { - _req = gr_alloc_request(&ep->ep, GFP_KERNEL); - buf = devm_kzalloc(dev->dev, PAGE_SIZE, GFP_DMA | GFP_KERNEL); + _req = gr_alloc_request(&ep->ep, GFP_ATOMIC); + buf = devm_kzalloc(dev->dev, PAGE_SIZE, GFP_DMA | GFP_ATOMIC); if (!_req || !buf) { /* possible _req freed by gr_probe via gr_remove */ return -ENOMEM; @@ -2020,9 +2025,7 @@ static int gr_udc_init(struct gr_udc *dev) u32 dmactrl_val; int i; int ret = 0; - u32 *bufsizes; u32 bufsize; - int len; gr_set_address(dev, 0); @@ -2033,19 +2036,17 @@ static int gr_udc_init(struct gr_udc *dev) INIT_LIST_HEAD(&dev->ep_list); gr_set_ep0state(dev, GR_EP0_DISCONNECT); - bufsizes = (u32 *)of_get_property(np, "epobufsizes", &len); - len /= sizeof(u32); for (i = 0; i < dev->nepo; i++) { - bufsize = (bufsizes && i < len) ? bufsizes[i] : 1024; + if (of_property_read_u32_index(np, "epobufsizes", i, &bufsize)) + bufsize = 1024; ret = gr_ep_init(dev, i, 0, bufsize); if (ret) return ret; } - bufsizes = (u32 *)of_get_property(np, "epibufsizes", &len); - len /= sizeof(u32); for (i = 0; i < dev->nepi; i++) { - bufsize = (bufsizes && i < len) ? bufsizes[i] : 1024; + if (of_property_read_u32_index(np, "epibufsizes", i, &bufsize)) + bufsize = 1024; ret = gr_ep_init(dev, i, 1, bufsize); if (ret) return ret; @@ -2065,9 +2066,9 @@ static int gr_udc_init(struct gr_udc *dev) return 0; } -static int gr_remove(struct platform_device *ofdev) +static int gr_remove(struct platform_device *pdev) { - struct gr_udc *dev = dev_get_drvdata(&ofdev->dev); + struct gr_udc *dev = platform_get_drvdata(pdev); if (dev->added) usb_del_gadget_udc(&dev->gadget); /* Shuts everything down */ @@ -2077,7 +2078,7 @@ static int gr_remove(struct platform_device *ofdev) gr_dfs_delete(dev); if (dev->desc_pool) dma_pool_destroy(dev->desc_pool); - dev_set_drvdata(&ofdev->dev, NULL); + platform_set_drvdata(pdev, NULL); gr_free_request(&dev->epi[0].ep, &dev->ep0reqi->req); gr_free_request(&dev->epo[0].ep, &dev->ep0reqo->req); @@ -2090,7 +2091,7 @@ static int gr_request_irq(struct gr_udc *dev, int irq) IRQF_SHARED, driver_name, dev); } -static int gr_probe(struct platform_device *ofdev) +static int gr_probe(struct platform_device *pdev) { struct gr_udc *dev; struct resource *res; @@ -2098,30 +2099,32 @@ static int gr_probe(struct platform_device *ofdev) int retval; u32 status; - dev = devm_kzalloc(&ofdev->dev, sizeof(*dev), GFP_KERNEL); + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; - dev->dev = &ofdev->dev; + dev->dev = &pdev->dev; - res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); regs = devm_ioremap_resource(dev->dev, res); if (IS_ERR(regs)) return PTR_ERR(regs); - dev->irq = irq_of_parse_and_map(dev->dev->of_node, 0); - if (!dev->irq) { + dev->irq = platform_get_irq(pdev, 0); + if (dev->irq <= 0) { dev_err(dev->dev, "No irq found\n"); return -ENODEV; } /* Some core configurations has separate irqs for IN and OUT events */ - dev->irqi = irq_of_parse_and_map(dev->dev->of_node, 1); - if (dev->irqi) { - dev->irqo = irq_of_parse_and_map(dev->dev->of_node, 2); - if (!dev->irqo) { + dev->irqi = platform_get_irq(pdev, 1); + if (dev->irqi > 0) { + dev->irqo = platform_get_irq(pdev, 2); + if (dev->irqo <= 0) { dev_err(dev->dev, "Found irqi but not irqo\n"); return -ENODEV; } + } else { + dev->irqi = 0; } dev->gadget.name = driver_name; @@ -2132,7 +2135,7 @@ static int gr_probe(struct platform_device *ofdev) spin_lock_init(&dev->lock); dev->regs = regs; - dev_set_drvdata(&ofdev->dev, dev); + platform_set_drvdata(pdev, dev); /* Determine number of endpoints and data interface mode */ status = gr_read32(&dev->regs->status); @@ -2204,7 +2207,7 @@ out: spin_unlock(&dev->lock); if (retval) - gr_remove(ofdev); + gr_remove(pdev); return retval; } diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index a925d0cbcd41..ee6c16416c30 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1494,6 +1494,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) */ if (value == 0) { INFO (dev, "configuration #%d\n", dev->current_config); + usb_gadget_set_state(gadget, USB_STATE_CONFIGURED); if (dev->usermode_setup) { dev->setup_can_stall = 0; goto delegate; @@ -1501,7 +1502,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) } break; -#ifndef CONFIG_USB_GADGET_PXA25X +#ifndef CONFIG_USB_PXA25X /* PXA automagically handles this request too */ case USB_REQ_GET_CONFIGURATION: if (ctrl->bRequestType != 0x80) diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 8cae01d88597..0d17174b86f8 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1594,7 +1594,6 @@ static int __init m66592_probe(struct platform_device *pdev) m66592 = kzalloc(sizeof(struct m66592), GFP_KERNEL); if (m66592 == NULL) { ret = -ENOMEM; - pr_err("kzalloc error\n"); goto clean_up; } diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c index d2ca59e7b477..16248711c152 100644 --- a/drivers/usb/gadget/mv_u3d_core.c +++ b/drivers/usb/gadget/mv_u3d_core.c @@ -297,10 +297,8 @@ static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req, u3d = req->ep->u3d; trb = kzalloc(sizeof(*trb), GFP_ATOMIC); - if (!trb) { - dev_err(u3d->dev, "%s, trb alloc fail\n", __func__); + if (!trb) return NULL; - } /* * Be careful that no _GFP_HIGHMEM is set, @@ -446,17 +444,12 @@ static int mv_u3d_req_to_trb(struct mv_u3d_req *req) trb_num++; trb = kcalloc(trb_num, sizeof(*trb), GFP_ATOMIC); - if (!trb) { - dev_err(u3d->dev, - "%s, trb alloc fail\n", __func__); + if (!trb) return -ENOMEM; - } trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC); if (!trb_hw) { kfree(trb); - dev_err(u3d->dev, - "%s, trb_hw alloc fail\n", __func__); return -ENOMEM; } @@ -1811,7 +1804,6 @@ static int mv_u3d_probe(struct platform_device *dev) u3d = kzalloc(sizeof(*u3d), GFP_KERNEL); if (!u3d) { - dev_err(&dev->dev, "failed to allocate memory for u3d\n"); retval = -ENOMEM; goto err_alloc_private; } @@ -1905,7 +1897,6 @@ static int mv_u3d_probe(struct platform_device *dev) size = u3d->max_eps * sizeof(struct mv_u3d_ep) * 2; u3d->eps = kzalloc(size, GFP_KERNEL); if (!u3d->eps) { - dev_err(&dev->dev, "allocate ep memory failed\n"); retval = -ENOMEM; goto err_alloc_eps; } @@ -1913,7 +1904,6 @@ static int mv_u3d_probe(struct platform_device *dev) /* initialize ep0 status request structure */ u3d->status_req = kzalloc(sizeof(struct mv_u3d_req) + 8, GFP_KERNEL); if (!u3d->status_req) { - dev_err(&dev->dev, "allocate status_req memory failed\n"); retval = -ENOMEM; goto err_alloc_status_req; } diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 43e5e2f9888f..300b3a71383b 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -1972,7 +1972,9 @@ static int net2280_stop(struct usb_gadget *_gadget, device_remove_file (&dev->pdev->dev, &dev_attr_function); device_remove_file (&dev->pdev->dev, &dev_attr_queues); - DEBUG (dev, "unregistered driver '%s'\n", driver->driver.name); + DEBUG(dev, "unregistered driver '%s'\n", + driver ? driver->driver.name : ""); + return 0; } diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index aff0a6718bc6..b698a490cc7d 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1904,7 +1904,6 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597 = kzalloc(sizeof(struct r8a66597), GFP_KERNEL); if (r8a66597 == NULL) { ret = -ENOMEM; - dev_err(&pdev->dev, "kzalloc error\n"); goto clean_up; } diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 7ed452d90f4d..95d2324f6977 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -761,7 +761,7 @@ int rndis_signal_connect(int configNr) return rndis_indicate_status_msg(configNr, RNDIS_STATUS_MEDIA_CONNECT); } -EXPORT_SYMBOL(rndis_signal_connect); +EXPORT_SYMBOL_GPL(rndis_signal_connect); int rndis_signal_disconnect(int configNr) { @@ -770,7 +770,7 @@ int rndis_signal_disconnect(int configNr) return rndis_indicate_status_msg(configNr, RNDIS_STATUS_MEDIA_DISCONNECT); } -EXPORT_SYMBOL(rndis_signal_disconnect); +EXPORT_SYMBOL_GPL(rndis_signal_disconnect); void rndis_uninit(int configNr) { @@ -785,13 +785,13 @@ void rndis_uninit(int configNr) while ((buf = rndis_get_next_response(configNr, &length))) rndis_free_response(configNr, buf); } -EXPORT_SYMBOL(rndis_uninit); +EXPORT_SYMBOL_GPL(rndis_uninit); void rndis_set_host_mac(int configNr, const u8 *addr) { rndis_per_dev_params[configNr].host_mac = addr; } -EXPORT_SYMBOL(rndis_set_host_mac); +EXPORT_SYMBOL_GPL(rndis_set_host_mac); /* * Message Parser @@ -874,7 +874,7 @@ int rndis_msg_parser(u8 configNr, u8 *buf) return -ENOTSUPP; } -EXPORT_SYMBOL(rndis_msg_parser); +EXPORT_SYMBOL_GPL(rndis_msg_parser); int rndis_register(void (*resp_avail)(void *v), void *v) { @@ -896,7 +896,7 @@ int rndis_register(void (*resp_avail)(void *v), void *v) return -ENODEV; } -EXPORT_SYMBOL(rndis_register); +EXPORT_SYMBOL_GPL(rndis_register); void rndis_deregister(int configNr) { @@ -905,7 +905,7 @@ void rndis_deregister(int configNr) if (configNr >= RNDIS_MAX_CONFIGS) return; rndis_per_dev_params[configNr].used = 0; } -EXPORT_SYMBOL(rndis_deregister); +EXPORT_SYMBOL_GPL(rndis_deregister); int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter) { @@ -919,7 +919,7 @@ int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter) return 0; } -EXPORT_SYMBOL(rndis_set_param_dev); +EXPORT_SYMBOL_GPL(rndis_set_param_dev); int rndis_set_param_vendor(u8 configNr, u32 vendorID, const char *vendorDescr) { @@ -932,7 +932,7 @@ int rndis_set_param_vendor(u8 configNr, u32 vendorID, const char *vendorDescr) return 0; } -EXPORT_SYMBOL(rndis_set_param_vendor); +EXPORT_SYMBOL_GPL(rndis_set_param_vendor); int rndis_set_param_medium(u8 configNr, u32 medium, u32 speed) { @@ -944,7 +944,7 @@ int rndis_set_param_medium(u8 configNr, u32 medium, u32 speed) return 0; } -EXPORT_SYMBOL(rndis_set_param_medium); +EXPORT_SYMBOL_GPL(rndis_set_param_medium); void rndis_add_hdr(struct sk_buff *skb) { @@ -959,7 +959,7 @@ void rndis_add_hdr(struct sk_buff *skb) header->DataOffset = cpu_to_le32(36); header->DataLength = cpu_to_le32(skb->len - sizeof(*header)); } -EXPORT_SYMBOL(rndis_add_hdr); +EXPORT_SYMBOL_GPL(rndis_add_hdr); void rndis_free_response(int configNr, u8 *buf) { @@ -976,7 +976,7 @@ void rndis_free_response(int configNr, u8 *buf) } } } -EXPORT_SYMBOL(rndis_free_response); +EXPORT_SYMBOL_GPL(rndis_free_response); u8 *rndis_get_next_response(int configNr, u32 *length) { @@ -998,7 +998,7 @@ u8 *rndis_get_next_response(int configNr, u32 *length) return NULL; } -EXPORT_SYMBOL(rndis_get_next_response); +EXPORT_SYMBOL_GPL(rndis_get_next_response); static rndis_resp_t *rndis_add_response(int configNr, u32 length) { @@ -1042,7 +1042,7 @@ int rndis_rm_hdr(struct gether *port, skb_queue_tail(list, skb); return 0; } -EXPORT_SYMBOL(rndis_rm_hdr); +EXPORT_SYMBOL_GPL(rndis_rm_hdr); #ifdef CONFIG_USB_GADGET_DEBUG_FILES diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c deleted file mode 100644 index 2a9cb674926a..000000000000 --- a/drivers/usb/gadget/s3c-hsotg.c +++ /dev/null @@ -1,3853 +0,0 @@ -/** - * linux/drivers/usb/gadget/s3c-hsotg.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C USB2.0 High-speed / OtG driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/clk.h> -#include <linux/regulator/consumer.h> -#include <linux/of_platform.h> -#include <linux/phy/phy.h> - -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> -#include <linux/usb/phy.h> -#include <linux/platform_data/s3c-hsotg.h> - -#include "s3c-hsotg.h" - -static const char * const s3c_hsotg_supply_names[] = { - "vusb_d", /* digital USB supply, 1.2V */ - "vusb_a", /* analog USB supply, 1.1V */ -}; - -/* - * EP0_MPS_LIMIT - * - * Unfortunately there seems to be a limit of the amount of data that can - * be transferred by IN transactions on EP0. This is either 127 bytes or 3 - * packets (which practically means 1 packet and 63 bytes of data) when the - * MPS is set to 64. - * - * This means if we are wanting to move >127 bytes of data, we need to - * split the transactions up, but just doing one packet at a time does - * not work (this may be an implicit DATA0 PID on first packet of the - * transaction) and doing 2 packets is outside the controller's limits. - * - * If we try to lower the MPS size for EP0, then no transfers work properly - * for EP0, and the system will fail basic enumeration. As no cause for this - * has currently been found, we cannot support any large IN transfers for - * EP0. - */ -#define EP0_MPS_LIMIT 64 - -struct s3c_hsotg; -struct s3c_hsotg_req; - -/** - * struct s3c_hsotg_ep - driver endpoint definition. - * @ep: The gadget layer representation of the endpoint. - * @name: The driver generated name for the endpoint. - * @queue: Queue of requests for this endpoint. - * @parent: Reference back to the parent device structure. - * @req: The current request that the endpoint is processing. This is - * used to indicate an request has been loaded onto the endpoint - * and has yet to be completed (maybe due to data move, or simply - * awaiting an ack from the core all the data has been completed). - * @debugfs: File entry for debugfs file for this endpoint. - * @lock: State lock to protect contents of endpoint. - * @dir_in: Set to true if this endpoint is of the IN direction, which - * means that it is sending data to the Host. - * @index: The index for the endpoint registers. - * @mc: Multi Count - number of transactions per microframe - * @interval - Interval for periodic endpoints - * @name: The name array passed to the USB core. - * @halted: Set if the endpoint has been halted. - * @periodic: Set if this is a periodic ep, such as Interrupt - * @isochronous: Set if this is a isochronous ep - * @sent_zlp: Set if we've sent a zero-length packet. - * @total_data: The total number of data bytes done. - * @fifo_size: The size of the FIFO (for periodic IN endpoints) - * @fifo_load: The amount of data loaded into the FIFO (periodic IN) - * @last_load: The offset of data for the last start of request. - * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN - * - * This is the driver's state for each registered enpoint, allowing it - * to keep track of transactions that need doing. Each endpoint has a - * lock to protect the state, to try and avoid using an overall lock - * for the host controller as much as possible. - * - * For periodic IN endpoints, we have fifo_size and fifo_load to try - * and keep track of the amount of data in the periodic FIFO for each - * of these as we don't have a status register that tells us how much - * is in each of them. (note, this may actually be useless information - * as in shared-fifo mode periodic in acts like a single-frame packet - * buffer than a fifo) - */ -struct s3c_hsotg_ep { - struct usb_ep ep; - struct list_head queue; - struct s3c_hsotg *parent; - struct s3c_hsotg_req *req; - struct dentry *debugfs; - - - unsigned long total_data; - unsigned int size_loaded; - unsigned int last_load; - unsigned int fifo_load; - unsigned short fifo_size; - - unsigned char dir_in; - unsigned char index; - unsigned char mc; - unsigned char interval; - - unsigned int halted:1; - unsigned int periodic:1; - unsigned int isochronous:1; - unsigned int sent_zlp:1; - - char name[10]; -}; - -/** - * struct s3c_hsotg - driver state. - * @dev: The parent device supplied to the probe function - * @driver: USB gadget driver - * @phy: The otg phy transceiver structure for phy control. - * @uphy: The otg phy transceiver structure for old USB phy control. - * @plat: The platform specific configuration data. This can be removed once - * all SoCs support usb transceiver. - * @regs: The memory area mapped for accessing registers. - * @irq: The IRQ number we are using - * @supplies: Definition of USB power supplies - * @phyif: PHY interface width - * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. - * @num_of_eps: Number of available EPs (excluding EP0) - * @debug_root: root directrory for debugfs. - * @debug_file: main status file for debugfs. - * @debug_fifo: FIFO status file for debugfs. - * @ep0_reply: Request used for ep0 reply. - * @ep0_buff: Buffer for EP0 reply data, if needed. - * @ctrl_buff: Buffer for EP0 control requests. - * @ctrl_req: Request for EP0 control packets. - * @setup: NAK management for EP0 SETUP - * @last_rst: Time of last reset - * @eps: The endpoints being supplied to the gadget framework - */ -struct s3c_hsotg { - struct device *dev; - struct usb_gadget_driver *driver; - struct phy *phy; - struct usb_phy *uphy; - struct s3c_hsotg_plat *plat; - - spinlock_t lock; - - void __iomem *regs; - int irq; - struct clk *clk; - - struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; - - u32 phyif; - unsigned int dedicated_fifos:1; - unsigned char num_of_eps; - - struct dentry *debug_root; - struct dentry *debug_file; - struct dentry *debug_fifo; - - struct usb_request *ep0_reply; - struct usb_request *ctrl_req; - u8 ep0_buff[8]; - u8 ctrl_buff[8]; - - struct usb_gadget gadget; - unsigned int setup; - unsigned long last_rst; - struct s3c_hsotg_ep *eps; -}; - -/** - * struct s3c_hsotg_req - data transfer request - * @req: The USB gadget request - * @queue: The list of requests for the endpoint this is queued for. - * @in_progress: Has already had size/packets written to core - * @mapped: DMA buffer for this request has been mapped via dma_map_single(). - */ -struct s3c_hsotg_req { - struct usb_request req; - struct list_head queue; - unsigned char in_progress; - unsigned char mapped; -}; - -/* conversion functions */ -static inline struct s3c_hsotg_req *our_req(struct usb_request *req) -{ - return container_of(req, struct s3c_hsotg_req, req); -} - -static inline struct s3c_hsotg_ep *our_ep(struct usb_ep *ep) -{ - return container_of(ep, struct s3c_hsotg_ep, ep); -} - -static inline struct s3c_hsotg *to_hsotg(struct usb_gadget *gadget) -{ - return container_of(gadget, struct s3c_hsotg, gadget); -} - -static inline void __orr32(void __iomem *ptr, u32 val) -{ - writel(readl(ptr) | val, ptr); -} - -static inline void __bic32(void __iomem *ptr, u32 val) -{ - writel(readl(ptr) & ~val, ptr); -} - -/* forward decleration of functions */ -static void s3c_hsotg_dump(struct s3c_hsotg *hsotg); - -/** - * using_dma - return the DMA status of the driver. - * @hsotg: The driver state. - * - * Return true if we're using DMA. - * - * Currently, we have the DMA support code worked into everywhere - * that needs it, but the AMBA DMA implementation in the hardware can - * only DMA from 32bit aligned addresses. This means that gadgets such - * as the CDC Ethernet cannot work as they often pass packets which are - * not 32bit aligned. - * - * Unfortunately the choice to use DMA or not is global to the controller - * and seems to be only settable when the controller is being put through - * a core reset. This means we either need to fix the gadgets to take - * account of DMA alignment, or add bounce buffers (yuerk). - * - * Until this issue is sorted out, we always return 'false'. - */ -static inline bool using_dma(struct s3c_hsotg *hsotg) -{ - return false; /* support is not complete */ -} - -/** - * s3c_hsotg_en_gsint - enable one or more of the general interrupt - * @hsotg: The device state - * @ints: A bitmask of the interrupts to enable - */ -static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints) -{ - u32 gsintmsk = readl(hsotg->regs + GINTMSK); - u32 new_gsintmsk; - - new_gsintmsk = gsintmsk | ints; - - if (new_gsintmsk != gsintmsk) { - dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk); - writel(new_gsintmsk, hsotg->regs + GINTMSK); - } -} - -/** - * s3c_hsotg_disable_gsint - disable one or more of the general interrupt - * @hsotg: The device state - * @ints: A bitmask of the interrupts to enable - */ -static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints) -{ - u32 gsintmsk = readl(hsotg->regs + GINTMSK); - u32 new_gsintmsk; - - new_gsintmsk = gsintmsk & ~ints; - - if (new_gsintmsk != gsintmsk) - writel(new_gsintmsk, hsotg->regs + GINTMSK); -} - -/** - * s3c_hsotg_ctrl_epint - enable/disable an endpoint irq - * @hsotg: The device state - * @ep: The endpoint index - * @dir_in: True if direction is in. - * @en: The enable value, true to enable - * - * Set or clear the mask for an individual endpoint's interrupt - * request. - */ -static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg, - unsigned int ep, unsigned int dir_in, - unsigned int en) -{ - unsigned long flags; - u32 bit = 1 << ep; - u32 daint; - - if (!dir_in) - bit <<= 16; - - local_irq_save(flags); - daint = readl(hsotg->regs + DAINTMSK); - if (en) - daint |= bit; - else - daint &= ~bit; - writel(daint, hsotg->regs + DAINTMSK); - local_irq_restore(flags); -} - -/** - * s3c_hsotg_init_fifo - initialise non-periodic FIFOs - * @hsotg: The device instance. - */ -static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) -{ - unsigned int ep; - unsigned int addr; - unsigned int size; - int timeout; - u32 val; - - /* set FIFO sizes to 2048/1024 */ - - writel(2048, hsotg->regs + GRXFSIZ); - writel(GNPTXFSIZ_NPTxFStAddr(2048) | - GNPTXFSIZ_NPTxFDep(1024), - hsotg->regs + GNPTXFSIZ); - - /* - * arange all the rest of the TX FIFOs, as some versions of this - * block have overlapping default addresses. This also ensures - * that if the settings have been changed, then they are set to - * known values. - */ - - /* start at the end of the GNPTXFSIZ, rounded up */ - addr = 2048 + 1024; - size = 768; - - /* - * currently we allocate TX FIFOs for all possible endpoints, - * and assume that they are all the same size. - */ - - for (ep = 1; ep <= 15; ep++) { - val = addr; - val |= size << DPTXFSIZn_DPTxFSize_SHIFT; - addr += size; - - writel(val, hsotg->regs + DPTXFSIZn(ep)); - } - - /* - * according to p428 of the design guide, we need to ensure that - * all fifos are flushed before continuing - */ - - writel(GRSTCTL_TxFNum(0x10) | GRSTCTL_TxFFlsh | - GRSTCTL_RxFFlsh, hsotg->regs + GRSTCTL); - - /* wait until the fifos are both flushed */ - timeout = 100; - while (1) { - val = readl(hsotg->regs + GRSTCTL); - - if ((val & (GRSTCTL_TxFFlsh | GRSTCTL_RxFFlsh)) == 0) - break; - - if (--timeout == 0) { - dev_err(hsotg->dev, - "%s: timeout flushing fifos (GRSTCTL=%08x)\n", - __func__, val); - } - - udelay(1); - } - - dev_dbg(hsotg->dev, "FIFOs reset, timeout at %d\n", timeout); -} - -/** - * @ep: USB endpoint to allocate request for. - * @flags: Allocation flags - * - * Allocate a new USB request structure appropriate for the specified endpoint - */ -static struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep, - gfp_t flags) -{ - struct s3c_hsotg_req *req; - - req = kzalloc(sizeof(struct s3c_hsotg_req), flags); - if (!req) - return NULL; - - INIT_LIST_HEAD(&req->queue); - - return &req->req; -} - -/** - * is_ep_periodic - return true if the endpoint is in periodic mode. - * @hs_ep: The endpoint to query. - * - * Returns true if the endpoint is in periodic mode, meaning it is being - * used for an Interrupt or ISO transfer. - */ -static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep) -{ - return hs_ep->periodic; -} - -/** - * s3c_hsotg_unmap_dma - unmap the DMA memory being used for the request - * @hsotg: The device state. - * @hs_ep: The endpoint for the request - * @hs_req: The request being processed. - * - * This is the reverse of s3c_hsotg_map_dma(), called for the completion - * of a request to ensure the buffer is ready for access by the caller. - */ -static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, - struct s3c_hsotg_ep *hs_ep, - struct s3c_hsotg_req *hs_req) -{ - struct usb_request *req = &hs_req->req; - - /* ignore this if we're not moving any data */ - if (hs_req->req.length == 0) - return; - - usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in); -} - -/** - * s3c_hsotg_write_fifo - write packet Data to the TxFIFO - * @hsotg: The controller state. - * @hs_ep: The endpoint we're going to write for. - * @hs_req: The request to write data for. - * - * This is called when the TxFIFO has some space in it to hold a new - * transmission and we have something to give it. The actual setup of - * the data size is done elsewhere, so all we have to do is to actually - * write the data. - * - * The return value is zero if there is more space (or nothing was done) - * otherwise -ENOSPC is returned if the FIFO space was used up. - * - * This routine is only needed for PIO - */ -static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, - struct s3c_hsotg_ep *hs_ep, - struct s3c_hsotg_req *hs_req) -{ - bool periodic = is_ep_periodic(hs_ep); - u32 gnptxsts = readl(hsotg->regs + GNPTXSTS); - int buf_pos = hs_req->req.actual; - int to_write = hs_ep->size_loaded; - void *data; - int can_write; - int pkt_round; - int max_transfer; - - to_write -= (buf_pos - hs_ep->last_load); - - /* if there's nothing to write, get out early */ - if (to_write == 0) - return 0; - - if (periodic && !hsotg->dedicated_fifos) { - u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); - int size_left; - int size_done; - - /* - * work out how much data was loaded so we can calculate - * how much data is left in the fifo. - */ - - size_left = DxEPTSIZ_XferSize_GET(epsize); - - /* - * if shared fifo, we cannot write anything until the - * previous data has been completely sent. - */ - if (hs_ep->fifo_load != 0) { - s3c_hsotg_en_gsint(hsotg, GINTSTS_PTxFEmp); - return -ENOSPC; - } - - dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n", - __func__, size_left, - hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size); - - /* how much of the data has moved */ - size_done = hs_ep->size_loaded - size_left; - - /* how much data is left in the fifo */ - can_write = hs_ep->fifo_load - size_done; - dev_dbg(hsotg->dev, "%s: => can_write1=%d\n", - __func__, can_write); - - can_write = hs_ep->fifo_size - can_write; - dev_dbg(hsotg->dev, "%s: => can_write2=%d\n", - __func__, can_write); - - if (can_write <= 0) { - s3c_hsotg_en_gsint(hsotg, GINTSTS_PTxFEmp); - return -ENOSPC; - } - } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { - can_write = readl(hsotg->regs + DTXFSTS(hs_ep->index)); - - can_write &= 0xffff; - can_write *= 4; - } else { - if (GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) { - dev_dbg(hsotg->dev, - "%s: no queue slots available (0x%08x)\n", - __func__, gnptxsts); - - s3c_hsotg_en_gsint(hsotg, GINTSTS_NPTxFEmp); - return -ENOSPC; - } - - can_write = GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts); - can_write *= 4; /* fifo size is in 32bit quantities. */ - } - - max_transfer = hs_ep->ep.maxpacket * hs_ep->mc; - - dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, max_transfer %d\n", - __func__, gnptxsts, can_write, to_write, max_transfer); - - /* - * limit to 512 bytes of data, it seems at least on the non-periodic - * FIFO, requests of >512 cause the endpoint to get stuck with a - * fragment of the end of the transfer in it. - */ - if (can_write > 512 && !periodic) - can_write = 512; - - /* - * limit the write to one max-packet size worth of data, but allow - * the transfer to return that it did not run out of fifo space - * doing it. - */ - if (to_write > max_transfer) { - to_write = max_transfer; - - /* it's needed only when we do not use dedicated fifos */ - if (!hsotg->dedicated_fifos) - s3c_hsotg_en_gsint(hsotg, - periodic ? GINTSTS_PTxFEmp : - GINTSTS_NPTxFEmp); - } - - /* see if we can write data */ - - if (to_write > can_write) { - to_write = can_write; - pkt_round = to_write % max_transfer; - - /* - * Round the write down to an - * exact number of packets. - * - * Note, we do not currently check to see if we can ever - * write a full packet or not to the FIFO. - */ - - if (pkt_round) - to_write -= pkt_round; - - /* - * enable correct FIFO interrupt to alert us when there - * is more room left. - */ - - /* it's needed only when we do not use dedicated fifos */ - if (!hsotg->dedicated_fifos) - s3c_hsotg_en_gsint(hsotg, - periodic ? GINTSTS_PTxFEmp : - GINTSTS_NPTxFEmp); - } - - dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n", - to_write, hs_req->req.length, can_write, buf_pos); - - if (to_write <= 0) - return -ENOSPC; - - hs_req->req.actual = buf_pos + to_write; - hs_ep->total_data += to_write; - - if (periodic) - hs_ep->fifo_load += to_write; - - to_write = DIV_ROUND_UP(to_write, 4); - data = hs_req->req.buf + buf_pos; - - iowrite32_rep(hsotg->regs + EPFIFO(hs_ep->index), data, to_write); - - return (to_write >= can_write) ? -ENOSPC : 0; -} - -/** - * get_ep_limit - get the maximum data legnth for this endpoint - * @hs_ep: The endpoint - * - * Return the maximum data that can be queued in one go on a given endpoint - * so that transfers that are too long can be split. - */ -static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) -{ - int index = hs_ep->index; - unsigned maxsize; - unsigned maxpkt; - - if (index != 0) { - maxsize = DxEPTSIZ_XferSize_LIMIT + 1; - maxpkt = DxEPTSIZ_PktCnt_LIMIT + 1; - } else { - maxsize = 64+64; - if (hs_ep->dir_in) - maxpkt = DIEPTSIZ0_PktCnt_LIMIT + 1; - else - maxpkt = 2; - } - - /* we made the constant loading easier above by using +1 */ - maxpkt--; - maxsize--; - - /* - * constrain by packet count if maxpkts*pktsize is greater - * than the length register size. - */ - - if ((maxpkt * hs_ep->ep.maxpacket) < maxsize) - maxsize = maxpkt * hs_ep->ep.maxpacket; - - return maxsize; -} - -/** - * s3c_hsotg_start_req - start a USB request from an endpoint's queue - * @hsotg: The controller state. - * @hs_ep: The endpoint to process a request for - * @hs_req: The request to start. - * @continuing: True if we are doing more for the current request. - * - * Start the given request running by setting the endpoint registers - * appropriately, and writing any data to the FIFOs. - */ -static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, - struct s3c_hsotg_ep *hs_ep, - struct s3c_hsotg_req *hs_req, - bool continuing) -{ - struct usb_request *ureq = &hs_req->req; - int index = hs_ep->index; - int dir_in = hs_ep->dir_in; - u32 epctrl_reg; - u32 epsize_reg; - u32 epsize; - u32 ctrl; - unsigned length; - unsigned packets; - unsigned maxreq; - - if (index != 0) { - if (hs_ep->req && !continuing) { - dev_err(hsotg->dev, "%s: active request\n", __func__); - WARN_ON(1); - return; - } else if (hs_ep->req != hs_req && continuing) { - dev_err(hsotg->dev, - "%s: continue different req\n", __func__); - WARN_ON(1); - return; - } - } - - epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); - epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index); - - dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n", - __func__, readl(hsotg->regs + epctrl_reg), index, - hs_ep->dir_in ? "in" : "out"); - - /* If endpoint is stalled, we will restart request later */ - ctrl = readl(hsotg->regs + epctrl_reg); - - if (ctrl & DxEPCTL_Stall) { - dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index); - return; - } - - length = ureq->length - ureq->actual; - dev_dbg(hsotg->dev, "ureq->length:%d ureq->actual:%d\n", - ureq->length, ureq->actual); - if (0) - dev_dbg(hsotg->dev, - "REQ buf %p len %d dma 0x%pad noi=%d zp=%d snok=%d\n", - ureq->buf, length, &ureq->dma, - ureq->no_interrupt, ureq->zero, ureq->short_not_ok); - - maxreq = get_ep_limit(hs_ep); - if (length > maxreq) { - int round = maxreq % hs_ep->ep.maxpacket; - - dev_dbg(hsotg->dev, "%s: length %d, max-req %d, r %d\n", - __func__, length, maxreq, round); - - /* round down to multiple of packets */ - if (round) - maxreq -= round; - - length = maxreq; - } - - if (length) - packets = DIV_ROUND_UP(length, hs_ep->ep.maxpacket); - else - packets = 1; /* send one packet if length is zero. */ - - if (hs_ep->isochronous && length > (hs_ep->mc * hs_ep->ep.maxpacket)) { - dev_err(hsotg->dev, "req length > maxpacket*mc\n"); - return; - } - - if (dir_in && index != 0) - if (hs_ep->isochronous) - epsize = DxEPTSIZ_MC(packets); - else - epsize = DxEPTSIZ_MC(1); - else - epsize = 0; - - if (index != 0 && ureq->zero) { - /* - * test for the packets being exactly right for the - * transfer - */ - - if (length == (packets * hs_ep->ep.maxpacket)) - packets++; - } - - epsize |= DxEPTSIZ_PktCnt(packets); - epsize |= DxEPTSIZ_XferSize(length); - - dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n", - __func__, packets, length, ureq->length, epsize, epsize_reg); - - /* store the request as the current one we're doing */ - hs_ep->req = hs_req; - - /* write size / packets */ - writel(epsize, hsotg->regs + epsize_reg); - - if (using_dma(hsotg) && !continuing) { - unsigned int dma_reg; - - /* - * write DMA address to control register, buffer already - * synced by s3c_hsotg_ep_queue(). - */ - - dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index); - writel(ureq->dma, hsotg->regs + dma_reg); - - dev_dbg(hsotg->dev, "%s: 0x%pad => 0x%08x\n", - __func__, &ureq->dma, dma_reg); - } - - ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */ - ctrl |= DxEPCTL_USBActEp; - - dev_dbg(hsotg->dev, "setup req:%d\n", hsotg->setup); - - /* For Setup request do not clear NAK */ - if (hsotg->setup && index == 0) - hsotg->setup = 0; - else - ctrl |= DxEPCTL_CNAK; /* clear NAK set by core */ - - - dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); - writel(ctrl, hsotg->regs + epctrl_reg); - - /* - * set these, it seems that DMA support increments past the end - * of the packet buffer so we need to calculate the length from - * this information. - */ - hs_ep->size_loaded = length; - hs_ep->last_load = ureq->actual; - - if (dir_in && !using_dma(hsotg)) { - /* set these anyway, we may need them for non-periodic in */ - hs_ep->fifo_load = 0; - - s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req); - } - - /* - * clear the INTknTXFEmpMsk when we start request, more as a aide - * to debugging to see what is going on. - */ - if (dir_in) - writel(DIEPMSK_INTknTXFEmpMsk, - hsotg->regs + DIEPINT(index)); - - /* - * Note, trying to clear the NAK here causes problems with transmit - * on the S3C6400 ending up with the TXFIFO becoming full. - */ - - /* check ep is enabled */ - if (!(readl(hsotg->regs + epctrl_reg) & DxEPCTL_EPEna)) - dev_warn(hsotg->dev, - "ep%d: failed to become enabled (DxEPCTL=0x%08x)?\n", - index, readl(hsotg->regs + epctrl_reg)); - - dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", - __func__, readl(hsotg->regs + epctrl_reg)); - - /* enable ep interrupts */ - s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1); -} - -/** - * s3c_hsotg_map_dma - map the DMA memory being used for the request - * @hsotg: The device state. - * @hs_ep: The endpoint the request is on. - * @req: The request being processed. - * - * We've been asked to queue a request, so ensure that the memory buffer - * is correctly setup for DMA. If we've been passed an extant DMA address - * then ensure the buffer has been synced to memory. If our buffer has no - * DMA memory, then we map the memory and mark our request to allow us to - * cleanup on completion. - */ -static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg, - struct s3c_hsotg_ep *hs_ep, - struct usb_request *req) -{ - struct s3c_hsotg_req *hs_req = our_req(req); - int ret; - - /* if the length is zero, ignore the DMA data */ - if (hs_req->req.length == 0) - return 0; - - ret = usb_gadget_map_request(&hsotg->gadget, req, hs_ep->dir_in); - if (ret) - goto dma_error; - - return 0; - -dma_error: - dev_err(hsotg->dev, "%s: failed to map buffer %p, %d bytes\n", - __func__, req->buf, req->length); - - return -EIO; -} - -static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, - gfp_t gfp_flags) -{ - struct s3c_hsotg_req *hs_req = our_req(req); - struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hs = hs_ep->parent; - bool first; - - dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n", - ep->name, req, req->length, req->buf, req->no_interrupt, - req->zero, req->short_not_ok); - - /* initialise status of the request */ - INIT_LIST_HEAD(&hs_req->queue); - req->actual = 0; - req->status = -EINPROGRESS; - - /* if we're using DMA, sync the buffers as necessary */ - if (using_dma(hs)) { - int ret = s3c_hsotg_map_dma(hs, hs_ep, req); - if (ret) - return ret; - } - - first = list_empty(&hs_ep->queue); - list_add_tail(&hs_req->queue, &hs_ep->queue); - - if (first) - s3c_hsotg_start_req(hs, hs_ep, hs_req, false); - - return 0; -} - -static int s3c_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req, - gfp_t gfp_flags) -{ - struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hs = hs_ep->parent; - unsigned long flags = 0; - int ret = 0; - - spin_lock_irqsave(&hs->lock, flags); - ret = s3c_hsotg_ep_queue(ep, req, gfp_flags); - spin_unlock_irqrestore(&hs->lock, flags); - - return ret; -} - -static void s3c_hsotg_ep_free_request(struct usb_ep *ep, - struct usb_request *req) -{ - struct s3c_hsotg_req *hs_req = our_req(req); - - kfree(hs_req); -} - -/** - * s3c_hsotg_complete_oursetup - setup completion callback - * @ep: The endpoint the request was on. - * @req: The request completed. - * - * Called on completion of any requests the driver itself - * submitted that need cleaning up. - */ -static void s3c_hsotg_complete_oursetup(struct usb_ep *ep, - struct usb_request *req) -{ - struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hsotg = hs_ep->parent; - - dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req); - - s3c_hsotg_ep_free_request(ep, req); -} - -/** - * ep_from_windex - convert control wIndex value to endpoint - * @hsotg: The driver state. - * @windex: The control request wIndex field (in host order). - * - * Convert the given wIndex into a pointer to an driver endpoint - * structure, or return NULL if it is not a valid endpoint. - */ -static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg, - u32 windex) -{ - struct s3c_hsotg_ep *ep = &hsotg->eps[windex & 0x7F]; - int dir = (windex & USB_DIR_IN) ? 1 : 0; - int idx = windex & 0x7F; - - if (windex >= 0x100) - return NULL; - - if (idx > hsotg->num_of_eps) - return NULL; - - if (idx && ep->dir_in != dir) - return NULL; - - return ep; -} - -/** - * s3c_hsotg_send_reply - send reply to control request - * @hsotg: The device state - * @ep: Endpoint 0 - * @buff: Buffer for request - * @length: Length of reply. - * - * Create a request and queue it on the given endpoint. This is useful as - * an internal method of sending replies to certain control requests, etc. - */ -static int s3c_hsotg_send_reply(struct s3c_hsotg *hsotg, - struct s3c_hsotg_ep *ep, - void *buff, - int length) -{ - struct usb_request *req; - int ret; - - dev_dbg(hsotg->dev, "%s: buff %p, len %d\n", __func__, buff, length); - - req = s3c_hsotg_ep_alloc_request(&ep->ep, GFP_ATOMIC); - hsotg->ep0_reply = req; - if (!req) { - dev_warn(hsotg->dev, "%s: cannot alloc req\n", __func__); - return -ENOMEM; - } - - req->buf = hsotg->ep0_buff; - req->length = length; - req->zero = 1; /* always do zero-length final transfer */ - req->complete = s3c_hsotg_complete_oursetup; - - if (length) - memcpy(req->buf, buff, length); - else - ep->sent_zlp = 1; - - ret = s3c_hsotg_ep_queue(&ep->ep, req, GFP_ATOMIC); - if (ret) { - dev_warn(hsotg->dev, "%s: cannot queue req\n", __func__); - return ret; - } - - return 0; -} - -/** - * s3c_hsotg_process_req_status - process request GET_STATUS - * @hsotg: The device state - * @ctrl: USB control request - */ -static int s3c_hsotg_process_req_status(struct s3c_hsotg *hsotg, - struct usb_ctrlrequest *ctrl) -{ - struct s3c_hsotg_ep *ep0 = &hsotg->eps[0]; - struct s3c_hsotg_ep *ep; - __le16 reply; - int ret; - - dev_dbg(hsotg->dev, "%s: USB_REQ_GET_STATUS\n", __func__); - - if (!ep0->dir_in) { - dev_warn(hsotg->dev, "%s: direction out?\n", __func__); - return -EINVAL; - } - - switch (ctrl->bRequestType & USB_RECIP_MASK) { - case USB_RECIP_DEVICE: - reply = cpu_to_le16(0); /* bit 0 => self powered, - * bit 1 => remote wakeup */ - break; - - case USB_RECIP_INTERFACE: - /* currently, the data result should be zero */ - reply = cpu_to_le16(0); - break; - - case USB_RECIP_ENDPOINT: - ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex)); - if (!ep) - return -ENOENT; - - reply = cpu_to_le16(ep->halted ? 1 : 0); - break; - - default: - return 0; - } - - if (le16_to_cpu(ctrl->wLength) != 2) - return -EINVAL; - - ret = s3c_hsotg_send_reply(hsotg, ep0, &reply, 2); - if (ret) { - dev_err(hsotg->dev, "%s: failed to send reply\n", __func__); - return ret; - } - - return 1; -} - -static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value); - -/** - * get_ep_head - return the first request on the endpoint - * @hs_ep: The controller endpoint to get - * - * Get the first request on the endpoint. - */ -static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep) -{ - if (list_empty(&hs_ep->queue)) - return NULL; - - return list_first_entry(&hs_ep->queue, struct s3c_hsotg_req, queue); -} - -/** - * s3c_hsotg_process_req_featire - process request {SET,CLEAR}_FEATURE - * @hsotg: The device state - * @ctrl: USB control request - */ -static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg, - struct usb_ctrlrequest *ctrl) -{ - struct s3c_hsotg_ep *ep0 = &hsotg->eps[0]; - struct s3c_hsotg_req *hs_req; - bool restart; - bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE); - struct s3c_hsotg_ep *ep; - int ret; - bool halted; - - dev_dbg(hsotg->dev, "%s: %s_FEATURE\n", - __func__, set ? "SET" : "CLEAR"); - - if (ctrl->bRequestType == USB_RECIP_ENDPOINT) { - ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex)); - if (!ep) { - dev_dbg(hsotg->dev, "%s: no endpoint for 0x%04x\n", - __func__, le16_to_cpu(ctrl->wIndex)); - return -ENOENT; - } - - switch (le16_to_cpu(ctrl->wValue)) { - case USB_ENDPOINT_HALT: - halted = ep->halted; - - s3c_hsotg_ep_sethalt(&ep->ep, set); - - ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0); - if (ret) { - dev_err(hsotg->dev, - "%s: failed to send reply\n", __func__); - return ret; - } - - /* - * we have to complete all requests for ep if it was - * halted, and the halt was cleared by CLEAR_FEATURE - */ - - if (!set && halted) { - /* - * If we have request in progress, - * then complete it - */ - if (ep->req) { - hs_req = ep->req; - ep->req = NULL; - list_del_init(&hs_req->queue); - hs_req->req.complete(&ep->ep, - &hs_req->req); - } - - /* If we have pending request, then start it */ - restart = !list_empty(&ep->queue); - if (restart) { - hs_req = get_ep_head(ep); - s3c_hsotg_start_req(hsotg, ep, - hs_req, false); - } - } - - break; - - default: - return -ENOENT; - } - } else - return -ENOENT; /* currently only deal with endpoint */ - - return 1; -} - -static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg); -static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg); - -/** - * s3c_hsotg_stall_ep0 - stall ep0 - * @hsotg: The device state - * - * Set stall for ep0 as response for setup request. - */ -static void s3c_hsotg_stall_ep0(struct s3c_hsotg *hsotg) { - struct s3c_hsotg_ep *ep0 = &hsotg->eps[0]; - u32 reg; - u32 ctrl; - - dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in); - reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0; - - /* - * DxEPCTL_Stall will be cleared by EP once it has - * taken effect, so no need to clear later. - */ - - ctrl = readl(hsotg->regs + reg); - ctrl |= DxEPCTL_Stall; - ctrl |= DxEPCTL_CNAK; - writel(ctrl, hsotg->regs + reg); - - dev_dbg(hsotg->dev, - "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n", - ctrl, reg, readl(hsotg->regs + reg)); - - /* - * complete won't be called, so we enqueue - * setup request here - */ - s3c_hsotg_enqueue_setup(hsotg); -} - -/** - * s3c_hsotg_process_control - process a control request - * @hsotg: The device state - * @ctrl: The control request received - * - * The controller has received the SETUP phase of a control request, and - * needs to work out what to do next (and whether to pass it on to the - * gadget driver). - */ -static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, - struct usb_ctrlrequest *ctrl) -{ - struct s3c_hsotg_ep *ep0 = &hsotg->eps[0]; - int ret = 0; - u32 dcfg; - - ep0->sent_zlp = 0; - - dev_dbg(hsotg->dev, "ctrl Req=%02x, Type=%02x, V=%04x, L=%04x\n", - ctrl->bRequest, ctrl->bRequestType, - ctrl->wValue, ctrl->wLength); - - /* - * record the direction of the request, for later use when enquing - * packets onto EP0. - */ - - ep0->dir_in = (ctrl->bRequestType & USB_DIR_IN) ? 1 : 0; - dev_dbg(hsotg->dev, "ctrl: dir_in=%d\n", ep0->dir_in); - - /* - * if we've no data with this request, then the last part of the - * transaction is going to implicitly be IN. - */ - if (ctrl->wLength == 0) - ep0->dir_in = 1; - - if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { - switch (ctrl->bRequest) { - case USB_REQ_SET_ADDRESS: - s3c_hsotg_disconnect(hsotg); - dcfg = readl(hsotg->regs + DCFG); - dcfg &= ~DCFG_DevAddr_MASK; - dcfg |= ctrl->wValue << DCFG_DevAddr_SHIFT; - writel(dcfg, hsotg->regs + DCFG); - - dev_info(hsotg->dev, "new address %d\n", ctrl->wValue); - - ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0); - return; - - case USB_REQ_GET_STATUS: - ret = s3c_hsotg_process_req_status(hsotg, ctrl); - break; - - case USB_REQ_CLEAR_FEATURE: - case USB_REQ_SET_FEATURE: - ret = s3c_hsotg_process_req_feature(hsotg, ctrl); - break; - } - } - - /* as a fallback, try delivering it to the driver to deal with */ - - if (ret == 0 && hsotg->driver) { - spin_unlock(&hsotg->lock); - ret = hsotg->driver->setup(&hsotg->gadget, ctrl); - spin_lock(&hsotg->lock); - if (ret < 0) - dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret); - } - - /* - * the request is either unhandlable, or is not formatted correctly - * so respond with a STALL for the status stage to indicate failure. - */ - - if (ret < 0) - s3c_hsotg_stall_ep0(hsotg); -} - -/** - * s3c_hsotg_complete_setup - completion of a setup transfer - * @ep: The endpoint the request was on. - * @req: The request completed. - * - * Called on completion of any requests the driver itself submitted for - * EP0 setup packets - */ -static void s3c_hsotg_complete_setup(struct usb_ep *ep, - struct usb_request *req) -{ - struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hsotg = hs_ep->parent; - - if (req->status < 0) { - dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status); - return; - } - - spin_lock(&hsotg->lock); - if (req->actual == 0) - s3c_hsotg_enqueue_setup(hsotg); - else - s3c_hsotg_process_control(hsotg, req->buf); - spin_unlock(&hsotg->lock); -} - -/** - * s3c_hsotg_enqueue_setup - start a request for EP0 packets - * @hsotg: The device state. - * - * Enqueue a request on EP0 if necessary to received any SETUP packets - * received from the host. - */ -static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg) -{ - struct usb_request *req = hsotg->ctrl_req; - struct s3c_hsotg_req *hs_req = our_req(req); - int ret; - - dev_dbg(hsotg->dev, "%s: queueing setup request\n", __func__); - - req->zero = 0; - req->length = 8; - req->buf = hsotg->ctrl_buff; - req->complete = s3c_hsotg_complete_setup; - - if (!list_empty(&hs_req->queue)) { - dev_dbg(hsotg->dev, "%s already queued???\n", __func__); - return; - } - - hsotg->eps[0].dir_in = 0; - - ret = s3c_hsotg_ep_queue(&hsotg->eps[0].ep, req, GFP_ATOMIC); - if (ret < 0) { - dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret); - /* - * Don't think there's much we can do other than watch the - * driver fail. - */ - } -} - -/** - * s3c_hsotg_complete_request - complete a request given to us - * @hsotg: The device state. - * @hs_ep: The endpoint the request was on. - * @hs_req: The request to complete. - * @result: The result code (0 => Ok, otherwise errno) - * - * The given request has finished, so call the necessary completion - * if it has one and then look to see if we can start a new request - * on the endpoint. - * - * Note, expects the ep to already be locked as appropriate. - */ -static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, - struct s3c_hsotg_ep *hs_ep, - struct s3c_hsotg_req *hs_req, - int result) -{ - bool restart; - - if (!hs_req) { - dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__); - return; - } - - dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n", - hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete); - - /* - * only replace the status if we've not already set an error - * from a previous transaction - */ - - if (hs_req->req.status == -EINPROGRESS) - hs_req->req.status = result; - - hs_ep->req = NULL; - list_del_init(&hs_req->queue); - - if (using_dma(hsotg)) - s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req); - - /* - * call the complete request with the locks off, just in case the - * request tries to queue more work for this endpoint. - */ - - if (hs_req->req.complete) { - spin_unlock(&hsotg->lock); - hs_req->req.complete(&hs_ep->ep, &hs_req->req); - spin_lock(&hsotg->lock); - } - - /* - * Look to see if there is anything else to do. Note, the completion - * of the previous request may have caused a new request to be started - * so be careful when doing this. - */ - - if (!hs_ep->req && result >= 0) { - restart = !list_empty(&hs_ep->queue); - if (restart) { - hs_req = get_ep_head(hs_ep); - s3c_hsotg_start_req(hsotg, hs_ep, hs_req, false); - } - } -} - -/** - * s3c_hsotg_rx_data - receive data from the FIFO for an endpoint - * @hsotg: The device state. - * @ep_idx: The endpoint index for the data - * @size: The size of data in the fifo, in bytes - * - * The FIFO status shows there is data to read from the FIFO for a given - * endpoint, so sort out whether we need to read the data into a request - * that has been made for that endpoint. - */ -static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) -{ - struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx]; - struct s3c_hsotg_req *hs_req = hs_ep->req; - void __iomem *fifo = hsotg->regs + EPFIFO(ep_idx); - int to_read; - int max_req; - int read_ptr; - - - if (!hs_req) { - u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx)); - int ptr; - - dev_warn(hsotg->dev, - "%s: FIFO %d bytes on ep%d but no req (DxEPCTl=0x%08x)\n", - __func__, size, ep_idx, epctl); - - /* dump the data from the FIFO, we've nothing we can do */ - for (ptr = 0; ptr < size; ptr += 4) - (void)readl(fifo); - - return; - } - - to_read = size; - read_ptr = hs_req->req.actual; - max_req = hs_req->req.length - read_ptr; - - dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n", - __func__, to_read, max_req, read_ptr, hs_req->req.length); - - if (to_read > max_req) { - /* - * more data appeared than we where willing - * to deal with in this request. - */ - - /* currently we don't deal this */ - WARN_ON_ONCE(1); - } - - hs_ep->total_data += to_read; - hs_req->req.actual += to_read; - to_read = DIV_ROUND_UP(to_read, 4); - - /* - * note, we might over-write the buffer end by 3 bytes depending on - * alignment of the data. - */ - ioread32_rep(fifo, hs_req->req.buf + read_ptr, to_read); -} - -/** - * s3c_hsotg_send_zlp - send zero-length packet on control endpoint - * @hsotg: The device instance - * @req: The request currently on this endpoint - * - * Generate a zero-length IN packet request for terminating a SETUP - * transaction. - * - * Note, since we don't write any data to the TxFIFO, then it is - * currently believed that we do not need to wait for any space in - * the TxFIFO. - */ -static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, - struct s3c_hsotg_req *req) -{ - u32 ctrl; - - if (!req) { - dev_warn(hsotg->dev, "%s: no request?\n", __func__); - return; - } - - if (req->req.length == 0) { - hsotg->eps[0].sent_zlp = 1; - s3c_hsotg_enqueue_setup(hsotg); - return; - } - - hsotg->eps[0].dir_in = 1; - hsotg->eps[0].sent_zlp = 1; - - dev_dbg(hsotg->dev, "sending zero-length packet\n"); - - /* issue a zero-sized packet to terminate this */ - writel(DxEPTSIZ_MC(1) | DxEPTSIZ_PktCnt(1) | - DxEPTSIZ_XferSize(0), hsotg->regs + DIEPTSIZ(0)); - - ctrl = readl(hsotg->regs + DIEPCTL0); - ctrl |= DxEPCTL_CNAK; /* clear NAK set by core */ - ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */ - ctrl |= DxEPCTL_USBActEp; - writel(ctrl, hsotg->regs + DIEPCTL0); -} - -/** - * s3c_hsotg_handle_outdone - handle receiving OutDone/SetupDone from RXFIFO - * @hsotg: The device instance - * @epnum: The endpoint received from - * @was_setup: Set if processing a SetupDone event. - * - * The RXFIFO has delivered an OutDone event, which means that the data - * transfer for an OUT endpoint has been completed, either by a short - * packet or by the finish of a transfer. - */ -static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, - int epnum, bool was_setup) -{ - u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum)); - struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum]; - struct s3c_hsotg_req *hs_req = hs_ep->req; - struct usb_request *req = &hs_req->req; - unsigned size_left = DxEPTSIZ_XferSize_GET(epsize); - int result = 0; - - if (!hs_req) { - dev_dbg(hsotg->dev, "%s: no request active\n", __func__); - return; - } - - if (using_dma(hsotg)) { - unsigned size_done; - - /* - * Calculate the size of the transfer by checking how much - * is left in the endpoint size register and then working it - * out from the amount we loaded for the transfer. - * - * We need to do this as DMA pointers are always 32bit aligned - * so may overshoot/undershoot the transfer. - */ - - size_done = hs_ep->size_loaded - size_left; - size_done += hs_ep->last_load; - - req->actual = size_done; - } - - /* if there is more request to do, schedule new transfer */ - if (req->actual < req->length && size_left == 0) { - s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true); - return; - } else if (epnum == 0) { - /* - * After was_setup = 1 => - * set CNAK for non Setup requests - */ - hsotg->setup = was_setup ? 0 : 1; - } - - if (req->actual < req->length && req->short_not_ok) { - dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n", - __func__, req->actual, req->length); - - /* - * todo - what should we return here? there's no one else - * even bothering to check the status. - */ - } - - if (epnum == 0) { - /* - * Condition req->complete != s3c_hsotg_complete_setup says: - * send ZLP when we have an asynchronous request from gadget - */ - if (!was_setup && req->complete != s3c_hsotg_complete_setup) - s3c_hsotg_send_zlp(hsotg, hs_req); - } - - s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result); -} - -/** - * s3c_hsotg_read_frameno - read current frame number - * @hsotg: The device instance - * - * Return the current frame number - */ -static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) -{ - u32 dsts; - - dsts = readl(hsotg->regs + DSTS); - dsts &= DSTS_SOFFN_MASK; - dsts >>= DSTS_SOFFN_SHIFT; - - return dsts; -} - -/** - * s3c_hsotg_handle_rx - RX FIFO has data - * @hsotg: The device instance - * - * The IRQ handler has detected that the RX FIFO has some data in it - * that requires processing, so find out what is in there and do the - * appropriate read. - * - * The RXFIFO is a true FIFO, the packets coming out are still in packet - * chunks, so if you have x packets received on an endpoint you'll get x - * FIFO events delivered, each with a packet's worth of data in it. - * - * When using DMA, we should not be processing events from the RXFIFO - * as the actual data should be sent to the memory directly and we turn - * on the completion interrupts to get notifications of transfer completion. - */ -static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) -{ - u32 grxstsr = readl(hsotg->regs + GRXSTSP); - u32 epnum, status, size; - - WARN_ON(using_dma(hsotg)); - - epnum = grxstsr & GRXSTS_EPNum_MASK; - status = grxstsr & GRXSTS_PktSts_MASK; - - size = grxstsr & GRXSTS_ByteCnt_MASK; - size >>= GRXSTS_ByteCnt_SHIFT; - - if (1) - dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n", - __func__, grxstsr, size, epnum); - -#define __status(x) ((x) >> GRXSTS_PktSts_SHIFT) - - switch (status >> GRXSTS_PktSts_SHIFT) { - case __status(GRXSTS_PktSts_GlobalOutNAK): - dev_dbg(hsotg->dev, "GlobalOutNAK\n"); - break; - - case __status(GRXSTS_PktSts_OutDone): - dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n", - s3c_hsotg_read_frameno(hsotg)); - - if (!using_dma(hsotg)) - s3c_hsotg_handle_outdone(hsotg, epnum, false); - break; - - case __status(GRXSTS_PktSts_SetupDone): - dev_dbg(hsotg->dev, - "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n", - s3c_hsotg_read_frameno(hsotg), - readl(hsotg->regs + DOEPCTL(0))); - - s3c_hsotg_handle_outdone(hsotg, epnum, true); - break; - - case __status(GRXSTS_PktSts_OutRX): - s3c_hsotg_rx_data(hsotg, epnum, size); - break; - - case __status(GRXSTS_PktSts_SetupRX): - dev_dbg(hsotg->dev, - "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n", - s3c_hsotg_read_frameno(hsotg), - readl(hsotg->regs + DOEPCTL(0))); - - s3c_hsotg_rx_data(hsotg, epnum, size); - break; - - default: - dev_warn(hsotg->dev, "%s: unknown status %08x\n", - __func__, grxstsr); - - s3c_hsotg_dump(hsotg); - break; - } -} - -/** - * s3c_hsotg_ep0_mps - turn max packet size into register setting - * @mps: The maximum packet size in bytes. - */ -static u32 s3c_hsotg_ep0_mps(unsigned int mps) -{ - switch (mps) { - case 64: - return D0EPCTL_MPS_64; - case 32: - return D0EPCTL_MPS_32; - case 16: - return D0EPCTL_MPS_16; - case 8: - return D0EPCTL_MPS_8; - } - - /* bad max packet size, warn and return invalid result */ - WARN_ON(1); - return (u32)-1; -} - -/** - * s3c_hsotg_set_ep_maxpacket - set endpoint's max-packet field - * @hsotg: The driver state. - * @ep: The index number of the endpoint - * @mps: The maximum packet size in bytes - * - * Configure the maximum packet size for the given endpoint, updating - * the hardware control registers to reflect this. - */ -static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, - unsigned int ep, unsigned int mps) -{ - struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep]; - void __iomem *regs = hsotg->regs; - u32 mpsval; - u32 mcval; - u32 reg; - - if (ep == 0) { - /* EP0 is a special case */ - mpsval = s3c_hsotg_ep0_mps(mps); - if (mpsval > 3) - goto bad_mps; - hs_ep->ep.maxpacket = mps; - hs_ep->mc = 1; - } else { - mpsval = mps & DxEPCTL_MPS_MASK; - if (mpsval > 1024) - goto bad_mps; - mcval = ((mps >> 11) & 0x3) + 1; - hs_ep->mc = mcval; - if (mcval > 3) - goto bad_mps; - hs_ep->ep.maxpacket = mpsval; - } - - /* - * update both the in and out endpoint controldir_ registers, even - * if one of the directions may not be in use. - */ - - reg = readl(regs + DIEPCTL(ep)); - reg &= ~DxEPCTL_MPS_MASK; - reg |= mpsval; - writel(reg, regs + DIEPCTL(ep)); - - if (ep) { - reg = readl(regs + DOEPCTL(ep)); - reg &= ~DxEPCTL_MPS_MASK; - reg |= mpsval; - writel(reg, regs + DOEPCTL(ep)); - } - - return; - -bad_mps: - dev_err(hsotg->dev, "ep%d: bad mps of %d\n", ep, mps); -} - -/** - * s3c_hsotg_txfifo_flush - flush Tx FIFO - * @hsotg: The driver state - * @idx: The index for the endpoint (0..15) - */ -static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx) -{ - int timeout; - int val; - - writel(GRSTCTL_TxFNum(idx) | GRSTCTL_TxFFlsh, - hsotg->regs + GRSTCTL); - - /* wait until the fifo is flushed */ - timeout = 100; - - while (1) { - val = readl(hsotg->regs + GRSTCTL); - - if ((val & (GRSTCTL_TxFFlsh)) == 0) - break; - - if (--timeout == 0) { - dev_err(hsotg->dev, - "%s: timeout flushing fifo (GRSTCTL=%08x)\n", - __func__, val); - } - - udelay(1); - } -} - -/** - * s3c_hsotg_trytx - check to see if anything needs transmitting - * @hsotg: The driver state - * @hs_ep: The driver endpoint to check. - * - * Check to see if there is a request that has data to send, and if so - * make an attempt to write data into the FIFO. - */ -static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg, - struct s3c_hsotg_ep *hs_ep) -{ - struct s3c_hsotg_req *hs_req = hs_ep->req; - - if (!hs_ep->dir_in || !hs_req) { - /** - * if request is not enqueued, we disable interrupts - * for endpoints, excepting ep0 - */ - if (hs_ep->index != 0) - s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, - hs_ep->dir_in, 0); - return 0; - } - - if (hs_req->req.actual < hs_req->req.length) { - dev_dbg(hsotg->dev, "trying to write more for ep%d\n", - hs_ep->index); - return s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req); - } - - return 0; -} - -/** - * s3c_hsotg_complete_in - complete IN transfer - * @hsotg: The device state. - * @hs_ep: The endpoint that has just completed. - * - * An IN transfer has been completed, update the transfer's state and then - * call the relevant completion routines. - */ -static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, - struct s3c_hsotg_ep *hs_ep) -{ - struct s3c_hsotg_req *hs_req = hs_ep->req; - u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); - int size_left, size_done; - - if (!hs_req) { - dev_dbg(hsotg->dev, "XferCompl but no req\n"); - return; - } - - /* Finish ZLP handling for IN EP0 transactions */ - if (hsotg->eps[0].sent_zlp) { - dev_dbg(hsotg->dev, "zlp packet received\n"); - s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); - return; - } - - /* - * Calculate the size of the transfer by checking how much is left - * in the endpoint size register and then working it out from - * the amount we loaded for the transfer. - * - * We do this even for DMA, as the transfer may have incremented - * past the end of the buffer (DMA transfers are always 32bit - * aligned). - */ - - size_left = DxEPTSIZ_XferSize_GET(epsize); - - size_done = hs_ep->size_loaded - size_left; - size_done += hs_ep->last_load; - - if (hs_req->req.actual != size_done) - dev_dbg(hsotg->dev, "%s: adjusting size done %d => %d\n", - __func__, hs_req->req.actual, size_done); - - hs_req->req.actual = size_done; - dev_dbg(hsotg->dev, "req->length:%d req->actual:%d req->zero:%d\n", - hs_req->req.length, hs_req->req.actual, hs_req->req.zero); - - /* - * Check if dealing with Maximum Packet Size(MPS) IN transfer at EP0 - * When sent data is a multiple MPS size (e.g. 64B ,128B ,192B - * ,256B ... ), after last MPS sized packet send IN ZLP packet to - * inform the host that no more data is available. - * The state of req.zero member is checked to be sure that the value to - * send is smaller than wValue expected from host. - * Check req.length to NOT send another ZLP when the current one is - * under completion (the one for which this completion has been called). - */ - if (hs_req->req.length && hs_ep->index == 0 && hs_req->req.zero && - hs_req->req.length == hs_req->req.actual && - !(hs_req->req.length % hs_ep->ep.maxpacket)) { - - dev_dbg(hsotg->dev, "ep0 zlp IN packet sent\n"); - s3c_hsotg_send_zlp(hsotg, hs_req); - - return; - } - - if (!size_left && hs_req->req.actual < hs_req->req.length) { - dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__); - s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true); - } else - s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); -} - -/** - * s3c_hsotg_epint - handle an in/out endpoint interrupt - * @hsotg: The driver state - * @idx: The index for the endpoint (0..15) - * @dir_in: Set if this is an IN endpoint - * - * Process and clear any interrupt pending for an individual endpoint - */ -static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, - int dir_in) -{ - struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx]; - u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx); - u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx); - u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx); - u32 ints; - u32 ctrl; - - ints = readl(hsotg->regs + epint_reg); - ctrl = readl(hsotg->regs + epctl_reg); - - /* Clear endpoint interrupts */ - writel(ints, hsotg->regs + epint_reg); - - dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n", - __func__, idx, dir_in ? "in" : "out", ints); - - if (ints & DxEPINT_XferCompl) { - if (hs_ep->isochronous && hs_ep->interval == 1) { - if (ctrl & DxEPCTL_EOFrNum) - ctrl |= DxEPCTL_SetEvenFr; - else - ctrl |= DxEPCTL_SetOddFr; - writel(ctrl, hsotg->regs + epctl_reg); - } - - dev_dbg(hsotg->dev, - "%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n", - __func__, readl(hsotg->regs + epctl_reg), - readl(hsotg->regs + epsiz_reg)); - - /* - * we get OutDone from the FIFO, so we only need to look - * at completing IN requests here - */ - if (dir_in) { - s3c_hsotg_complete_in(hsotg, hs_ep); - - if (idx == 0 && !hs_ep->req) - s3c_hsotg_enqueue_setup(hsotg); - } else if (using_dma(hsotg)) { - /* - * We're using DMA, we need to fire an OutDone here - * as we ignore the RXFIFO. - */ - - s3c_hsotg_handle_outdone(hsotg, idx, false); - } - } - - if (ints & DxEPINT_EPDisbld) { - dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__); - - if (dir_in) { - int epctl = readl(hsotg->regs + epctl_reg); - - s3c_hsotg_txfifo_flush(hsotg, idx); - - if ((epctl & DxEPCTL_Stall) && - (epctl & DxEPCTL_EPType_Bulk)) { - int dctl = readl(hsotg->regs + DCTL); - - dctl |= DCTL_CGNPInNAK; - writel(dctl, hsotg->regs + DCTL); - } - } - } - - if (ints & DxEPINT_AHBErr) - dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__); - - if (ints & DxEPINT_Setup) { /* Setup or Timeout */ - dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__); - - if (using_dma(hsotg) && idx == 0) { - /* - * this is the notification we've received a - * setup packet. In non-DMA mode we'd get this - * from the RXFIFO, instead we need to process - * the setup here. - */ - - if (dir_in) - WARN_ON_ONCE(1); - else - s3c_hsotg_handle_outdone(hsotg, 0, true); - } - } - - if (ints & DxEPINT_Back2BackSetup) - dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__); - - if (dir_in && !hs_ep->isochronous) { - /* not sure if this is important, but we'll clear it anyway */ - if (ints & DIEPMSK_INTknTXFEmpMsk) { - dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n", - __func__, idx); - } - - /* this probably means something bad is happening */ - if (ints & DIEPMSK_INTknEPMisMsk) { - dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n", - __func__, idx); - } - - /* FIFO has space or is empty (see GAHBCFG) */ - if (hsotg->dedicated_fifos && - ints & DIEPMSK_TxFIFOEmpty) { - dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n", - __func__, idx); - if (!using_dma(hsotg)) - s3c_hsotg_trytx(hsotg, hs_ep); - } - } -} - -/** - * s3c_hsotg_irq_enumdone - Handle EnumDone interrupt (enumeration done) - * @hsotg: The device state. - * - * Handle updating the device settings after the enumeration phase has - * been completed. - */ -static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) -{ - u32 dsts = readl(hsotg->regs + DSTS); - int ep0_mps = 0, ep_mps; - - /* - * This should signal the finish of the enumeration phase - * of the USB handshaking, so we should now know what rate - * we connected at. - */ - - dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts); - - /* - * note, since we're limited by the size of transfer on EP0, and - * it seems IN transfers must be a even number of packets we do - * not advertise a 64byte MPS on EP0. - */ - - /* catch both EnumSpd_FS and EnumSpd_FS48 */ - switch (dsts & DSTS_EnumSpd_MASK) { - case DSTS_EnumSpd_FS: - case DSTS_EnumSpd_FS48: - hsotg->gadget.speed = USB_SPEED_FULL; - ep0_mps = EP0_MPS_LIMIT; - ep_mps = 1023; - break; - - case DSTS_EnumSpd_HS: - hsotg->gadget.speed = USB_SPEED_HIGH; - ep0_mps = EP0_MPS_LIMIT; - ep_mps = 1024; - break; - - case DSTS_EnumSpd_LS: - hsotg->gadget.speed = USB_SPEED_LOW; - /* - * note, we don't actually support LS in this driver at the - * moment, and the documentation seems to imply that it isn't - * supported by the PHYs on some of the devices. - */ - break; - } - dev_info(hsotg->dev, "new device is %s\n", - usb_speed_string(hsotg->gadget.speed)); - - /* - * we should now know the maximum packet size for an - * endpoint, so set the endpoints to a default value. - */ - - if (ep0_mps) { - int i; - s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps); - for (i = 1; i < hsotg->num_of_eps; i++) - s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps); - } - - /* ensure after enumeration our EP0 is active */ - - s3c_hsotg_enqueue_setup(hsotg); - - dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + DIEPCTL0), - readl(hsotg->regs + DOEPCTL0)); -} - -/** - * kill_all_requests - remove all requests from the endpoint's queue - * @hsotg: The device state. - * @ep: The endpoint the requests may be on. - * @result: The result code to use. - * @force: Force removal of any current requests - * - * Go through the requests on the given endpoint and mark them - * completed with the given result code. - */ -static void kill_all_requests(struct s3c_hsotg *hsotg, - struct s3c_hsotg_ep *ep, - int result, bool force) -{ - struct s3c_hsotg_req *req, *treq; - - list_for_each_entry_safe(req, treq, &ep->queue, queue) { - /* - * currently, we can't do much about an already - * running request on an in endpoint - */ - - if (ep->req == req && ep->dir_in && !force) - continue; - - s3c_hsotg_complete_request(hsotg, ep, req, - result); - } - if(hsotg->dedicated_fifos) - if ((readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4 < 3072) - s3c_hsotg_txfifo_flush(hsotg, ep->index); -} - -#define call_gadget(_hs, _entry) \ -do { \ - if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \ - (_hs)->driver && (_hs)->driver->_entry) { \ - spin_unlock(&_hs->lock); \ - (_hs)->driver->_entry(&(_hs)->gadget); \ - spin_lock(&_hs->lock); \ - } \ -} while (0) - -/** - * s3c_hsotg_disconnect - disconnect service - * @hsotg: The device state. - * - * The device has been disconnected. Remove all current - * transactions and signal the gadget driver that this - * has happened. - */ -static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg) -{ - unsigned ep; - - for (ep = 0; ep < hsotg->num_of_eps; ep++) - kill_all_requests(hsotg, &hsotg->eps[ep], -ESHUTDOWN, true); - - call_gadget(hsotg, disconnect); -} - -/** - * s3c_hsotg_irq_fifoempty - TX FIFO empty interrupt handler - * @hsotg: The device state: - * @periodic: True if this is a periodic FIFO interrupt - */ -static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic) -{ - struct s3c_hsotg_ep *ep; - int epno, ret; - - /* look through for any more data to transmit */ - - for (epno = 0; epno < hsotg->num_of_eps; epno++) { - ep = &hsotg->eps[epno]; - - if (!ep->dir_in) - continue; - - if ((periodic && !ep->periodic) || - (!periodic && ep->periodic)) - continue; - - ret = s3c_hsotg_trytx(hsotg, ep); - if (ret < 0) - break; - } -} - -/* IRQ flags which will trigger a retry around the IRQ loop */ -#define IRQ_RETRY_MASK (GINTSTS_NPTxFEmp | \ - GINTSTS_PTxFEmp | \ - GINTSTS_RxFLvl) - -/** - * s3c_hsotg_corereset - issue softreset to the core - * @hsotg: The device state - * - * Issue a soft reset to the core, and await the core finishing it. - */ -static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) -{ - int timeout; - u32 grstctl; - - dev_dbg(hsotg->dev, "resetting core\n"); - - /* issue soft reset */ - writel(GRSTCTL_CSftRst, hsotg->regs + GRSTCTL); - - timeout = 10000; - do { - grstctl = readl(hsotg->regs + GRSTCTL); - } while ((grstctl & GRSTCTL_CSftRst) && timeout-- > 0); - - if (grstctl & GRSTCTL_CSftRst) { - dev_err(hsotg->dev, "Failed to get CSftRst asserted\n"); - return -EINVAL; - } - - timeout = 10000; - - while (1) { - u32 grstctl = readl(hsotg->regs + GRSTCTL); - - if (timeout-- < 0) { - dev_info(hsotg->dev, - "%s: reset failed, GRSTCTL=%08x\n", - __func__, grstctl); - return -ETIMEDOUT; - } - - if (!(grstctl & GRSTCTL_AHBIdle)) - continue; - - break; /* reset done */ - } - - dev_dbg(hsotg->dev, "reset successful\n"); - return 0; -} - -/** - * s3c_hsotg_core_init - issue softreset to the core - * @hsotg: The device state - * - * Issue a soft reset to the core, and await the core finishing it. - */ -static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) -{ - s3c_hsotg_corereset(hsotg); - - /* - * we must now enable ep0 ready for host detection and then - * set configuration. - */ - - /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(hsotg->phyif | GUSBCFG_TOutCal(7) | - (0x5 << 10), hsotg->regs + GUSBCFG); - - s3c_hsotg_init_fifo(hsotg); - - __orr32(hsotg->regs + DCTL, DCTL_SftDiscon); - - writel(1 << 18 | DCFG_DevSpd_HS, hsotg->regs + DCFG); - - /* Clear any pending OTG interrupts */ - writel(0xffffffff, hsotg->regs + GOTGINT); - - /* Clear any pending interrupts */ - writel(0xffffffff, hsotg->regs + GINTSTS); - - writel(GINTSTS_ErlySusp | GINTSTS_SessReqInt | - GINTSTS_GOUTNakEff | GINTSTS_GINNakEff | - GINTSTS_ConIDStsChng | GINTSTS_USBRst | - GINTSTS_EnumDone | GINTSTS_OTGInt | - GINTSTS_USBSusp | GINTSTS_WkUpInt, - hsotg->regs + GINTMSK); - - if (using_dma(hsotg)) - writel(GAHBCFG_GlblIntrEn | GAHBCFG_DMAEn | - GAHBCFG_HBstLen_Incr4, - hsotg->regs + GAHBCFG); - else - writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NPTxFEmpLvl | - GAHBCFG_PTxFEmpLvl) : 0) | - GAHBCFG_GlblIntrEn, - hsotg->regs + GAHBCFG); - - /* - * If INTknTXFEmpMsk is enabled, it's important to disable ep interrupts - * when we have no data to transfer. Otherwise we get being flooded by - * interrupts. - */ - - writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty | - DIEPMSK_INTknTXFEmpMsk : 0) | - DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk | - DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk | - DIEPMSK_INTknEPMisMsk, - hsotg->regs + DIEPMSK); - - /* - * don't need XferCompl, we get that from RXFIFO in slave mode. In - * DMA mode we may need this. - */ - writel((using_dma(hsotg) ? (DIEPMSK_XferComplMsk | - DIEPMSK_TimeOUTMsk) : 0) | - DOEPMSK_EPDisbldMsk | DOEPMSK_AHBErrMsk | - DOEPMSK_SetupMsk, - hsotg->regs + DOEPMSK); - - writel(0, hsotg->regs + DAINTMSK); - - dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + DIEPCTL0), - readl(hsotg->regs + DOEPCTL0)); - - /* enable in and out endpoint interrupts */ - s3c_hsotg_en_gsint(hsotg, GINTSTS_OEPInt | GINTSTS_IEPInt); - - /* - * Enable the RXFIFO when in slave mode, as this is how we collect - * the data. In DMA mode, we get events from the FIFO but also - * things we cannot process, so do not use it. - */ - if (!using_dma(hsotg)) - s3c_hsotg_en_gsint(hsotg, GINTSTS_RxFLvl); - - /* Enable interrupts for EP0 in and out */ - s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1); - s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1); - - __orr32(hsotg->regs + DCTL, DCTL_PWROnPrgDone); - udelay(10); /* see openiboot */ - __bic32(hsotg->regs + DCTL, DCTL_PWROnPrgDone); - - dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + DCTL)); - - /* - * DxEPCTL_USBActEp says RO in manual, but seems to be set by - * writing to the EPCTL register.. - */ - - /* set to read 1 8byte packet */ - writel(DxEPTSIZ_MC(1) | DxEPTSIZ_PktCnt(1) | - DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0); - - writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | - DxEPCTL_CNAK | DxEPCTL_EPEna | - DxEPCTL_USBActEp, - hsotg->regs + DOEPCTL0); - - /* enable, but don't activate EP0in */ - writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | - DxEPCTL_USBActEp, hsotg->regs + DIEPCTL0); - - s3c_hsotg_enqueue_setup(hsotg); - - dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + DIEPCTL0), - readl(hsotg->regs + DOEPCTL0)); - - /* clear global NAKs */ - writel(DCTL_CGOUTNak | DCTL_CGNPInNAK, - hsotg->regs + DCTL); - - /* must be at-least 3ms to allow bus to see disconnect */ - mdelay(3); - - /* remove the soft-disconnect and let's go */ - __bic32(hsotg->regs + DCTL, DCTL_SftDiscon); -} - -/** - * s3c_hsotg_irq - handle device interrupt - * @irq: The IRQ number triggered - * @pw: The pw value when registered the handler. - */ -static irqreturn_t s3c_hsotg_irq(int irq, void *pw) -{ - struct s3c_hsotg *hsotg = pw; - int retry_count = 8; - u32 gintsts; - u32 gintmsk; - - spin_lock(&hsotg->lock); -irq_retry: - gintsts = readl(hsotg->regs + GINTSTS); - gintmsk = readl(hsotg->regs + GINTMSK); - - dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n", - __func__, gintsts, gintsts & gintmsk, gintmsk, retry_count); - - gintsts &= gintmsk; - - if (gintsts & GINTSTS_OTGInt) { - u32 otgint = readl(hsotg->regs + GOTGINT); - - dev_info(hsotg->dev, "OTGInt: %08x\n", otgint); - - writel(otgint, hsotg->regs + GOTGINT); - } - - if (gintsts & GINTSTS_SessReqInt) { - dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__); - writel(GINTSTS_SessReqInt, hsotg->regs + GINTSTS); - } - - if (gintsts & GINTSTS_EnumDone) { - writel(GINTSTS_EnumDone, hsotg->regs + GINTSTS); - - s3c_hsotg_irq_enumdone(hsotg); - } - - if (gintsts & GINTSTS_ConIDStsChng) { - dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n", - readl(hsotg->regs + DSTS), - readl(hsotg->regs + GOTGCTL)); - - writel(GINTSTS_ConIDStsChng, hsotg->regs + GINTSTS); - } - - if (gintsts & (GINTSTS_OEPInt | GINTSTS_IEPInt)) { - u32 daint = readl(hsotg->regs + DAINT); - u32 daintmsk = readl(hsotg->regs + DAINTMSK); - u32 daint_out, daint_in; - int ep; - - daint &= daintmsk; - daint_out = daint >> DAINT_OutEP_SHIFT; - daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT); - - dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint); - - for (ep = 0; ep < 15 && daint_out; ep++, daint_out >>= 1) { - if (daint_out & 1) - s3c_hsotg_epint(hsotg, ep, 0); - } - - for (ep = 0; ep < 15 && daint_in; ep++, daint_in >>= 1) { - if (daint_in & 1) - s3c_hsotg_epint(hsotg, ep, 1); - } - } - - if (gintsts & GINTSTS_USBRst) { - - u32 usb_status = readl(hsotg->regs + GOTGCTL); - - dev_info(hsotg->dev, "%s: USBRst\n", __func__); - dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n", - readl(hsotg->regs + GNPTXSTS)); - - writel(GINTSTS_USBRst, hsotg->regs + GINTSTS); - - if (usb_status & GOTGCTL_BSESVLD) { - if (time_after(jiffies, hsotg->last_rst + - msecs_to_jiffies(200))) { - - kill_all_requests(hsotg, &hsotg->eps[0], - -ECONNRESET, true); - - s3c_hsotg_core_init(hsotg); - hsotg->last_rst = jiffies; - } - } - } - - /* check both FIFOs */ - - if (gintsts & GINTSTS_NPTxFEmp) { - dev_dbg(hsotg->dev, "NPTxFEmp\n"); - - /* - * Disable the interrupt to stop it happening again - * unless one of these endpoint routines decides that - * it needs re-enabling - */ - - s3c_hsotg_disable_gsint(hsotg, GINTSTS_NPTxFEmp); - s3c_hsotg_irq_fifoempty(hsotg, false); - } - - if (gintsts & GINTSTS_PTxFEmp) { - dev_dbg(hsotg->dev, "PTxFEmp\n"); - - /* See note in GINTSTS_NPTxFEmp */ - - s3c_hsotg_disable_gsint(hsotg, GINTSTS_PTxFEmp); - s3c_hsotg_irq_fifoempty(hsotg, true); - } - - if (gintsts & GINTSTS_RxFLvl) { - /* - * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty, - * we need to retry s3c_hsotg_handle_rx if this is still - * set. - */ - - s3c_hsotg_handle_rx(hsotg); - } - - if (gintsts & GINTSTS_ModeMis) { - dev_warn(hsotg->dev, "warning, mode mismatch triggered\n"); - writel(GINTSTS_ModeMis, hsotg->regs + GINTSTS); - } - - if (gintsts & GINTSTS_USBSusp) { - dev_info(hsotg->dev, "GINTSTS_USBSusp\n"); - writel(GINTSTS_USBSusp, hsotg->regs + GINTSTS); - - call_gadget(hsotg, suspend); - } - - if (gintsts & GINTSTS_WkUpInt) { - dev_info(hsotg->dev, "GINTSTS_WkUpIn\n"); - writel(GINTSTS_WkUpInt, hsotg->regs + GINTSTS); - - call_gadget(hsotg, resume); - } - - if (gintsts & GINTSTS_ErlySusp) { - dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n"); - writel(GINTSTS_ErlySusp, hsotg->regs + GINTSTS); - } - - /* - * these next two seem to crop-up occasionally causing the core - * to shutdown the USB transfer, so try clearing them and logging - * the occurrence. - */ - - if (gintsts & GINTSTS_GOUTNakEff) { - dev_info(hsotg->dev, "GOUTNakEff triggered\n"); - - writel(DCTL_CGOUTNak, hsotg->regs + DCTL); - - s3c_hsotg_dump(hsotg); - } - - if (gintsts & GINTSTS_GINNakEff) { - dev_info(hsotg->dev, "GINNakEff triggered\n"); - - writel(DCTL_CGNPInNAK, hsotg->regs + DCTL); - - s3c_hsotg_dump(hsotg); - } - - /* - * if we've had fifo events, we should try and go around the - * loop again to see if there's any point in returning yet. - */ - - if (gintsts & IRQ_RETRY_MASK && --retry_count > 0) - goto irq_retry; - - spin_unlock(&hsotg->lock); - - return IRQ_HANDLED; -} - -/** - * s3c_hsotg_ep_enable - enable the given endpoint - * @ep: The USB endpint to configure - * @desc: The USB endpoint descriptor to configure with. - * - * This is called from the USB gadget code's usb_ep_enable(). - */ -static int s3c_hsotg_ep_enable(struct usb_ep *ep, - const struct usb_endpoint_descriptor *desc) -{ - struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hsotg = hs_ep->parent; - unsigned long flags; - int index = hs_ep->index; - u32 epctrl_reg; - u32 epctrl; - u32 mps; - int dir_in; - int ret = 0; - - dev_dbg(hsotg->dev, - "%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n", - __func__, ep->name, desc->bEndpointAddress, desc->bmAttributes, - desc->wMaxPacketSize, desc->bInterval); - - /* not to be called for EP0 */ - WARN_ON(index == 0); - - dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0; - if (dir_in != hs_ep->dir_in) { - dev_err(hsotg->dev, "%s: direction mismatch!\n", __func__); - return -EINVAL; - } - - mps = usb_endpoint_maxp(desc); - - /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */ - - epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); - epctrl = readl(hsotg->regs + epctrl_reg); - - dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n", - __func__, epctrl, epctrl_reg); - - spin_lock_irqsave(&hsotg->lock, flags); - - epctrl &= ~(DxEPCTL_EPType_MASK | DxEPCTL_MPS_MASK); - epctrl |= DxEPCTL_MPS(mps); - - /* - * mark the endpoint as active, otherwise the core may ignore - * transactions entirely for this endpoint - */ - epctrl |= DxEPCTL_USBActEp; - - /* - * set the NAK status on the endpoint, otherwise we might try and - * do something with data that we've yet got a request to process - * since the RXFIFO will take data for an endpoint even if the - * size register hasn't been set. - */ - - epctrl |= DxEPCTL_SNAK; - - /* update the endpoint state */ - s3c_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps); - - /* default, set to non-periodic */ - hs_ep->isochronous = 0; - hs_ep->periodic = 0; - hs_ep->halted = 0; - hs_ep->interval = desc->bInterval; - - if (hs_ep->interval > 1 && hs_ep->mc > 1) - dev_err(hsotg->dev, "MC > 1 when interval is not 1\n"); - - switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { - case USB_ENDPOINT_XFER_ISOC: - epctrl |= DxEPCTL_EPType_Iso; - epctrl |= DxEPCTL_SetEvenFr; - hs_ep->isochronous = 1; - if (dir_in) - hs_ep->periodic = 1; - break; - - case USB_ENDPOINT_XFER_BULK: - epctrl |= DxEPCTL_EPType_Bulk; - break; - - case USB_ENDPOINT_XFER_INT: - if (dir_in) { - /* - * Allocate our TxFNum by simply using the index - * of the endpoint for the moment. We could do - * something better if the host indicates how - * many FIFOs we are expecting to use. - */ - - hs_ep->periodic = 1; - epctrl |= DxEPCTL_TxFNum(index); - } - - epctrl |= DxEPCTL_EPType_Intterupt; - break; - - case USB_ENDPOINT_XFER_CONTROL: - epctrl |= DxEPCTL_EPType_Control; - break; - } - - /* - * if the hardware has dedicated fifos, we must give each IN EP - * a unique tx-fifo even if it is non-periodic. - */ - if (dir_in && hsotg->dedicated_fifos) - epctrl |= DxEPCTL_TxFNum(index); - - /* for non control endpoints, set PID to D0 */ - if (index) - epctrl |= DxEPCTL_SetD0PID; - - dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n", - __func__, epctrl); - - writel(epctrl, hsotg->regs + epctrl_reg); - dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n", - __func__, readl(hsotg->regs + epctrl_reg)); - - /* enable the endpoint interrupt */ - s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1); - - spin_unlock_irqrestore(&hsotg->lock, flags); - return ret; -} - -/** - * s3c_hsotg_ep_disable - disable given endpoint - * @ep: The endpoint to disable. - */ -static int s3c_hsotg_ep_disable(struct usb_ep *ep) -{ - struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hsotg = hs_ep->parent; - int dir_in = hs_ep->dir_in; - int index = hs_ep->index; - unsigned long flags; - u32 epctrl_reg; - u32 ctrl; - - dev_info(hsotg->dev, "%s(ep %p)\n", __func__, ep); - - if (ep == &hsotg->eps[0].ep) { - dev_err(hsotg->dev, "%s: called for ep0\n", __func__); - return -EINVAL; - } - - epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); - - spin_lock_irqsave(&hsotg->lock, flags); - /* terminate all requests with shutdown */ - kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false); - - - ctrl = readl(hsotg->regs + epctrl_reg); - ctrl &= ~DxEPCTL_EPEna; - ctrl &= ~DxEPCTL_USBActEp; - ctrl |= DxEPCTL_SNAK; - - dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); - writel(ctrl, hsotg->regs + epctrl_reg); - - /* disable endpoint interrupts */ - s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0); - - spin_unlock_irqrestore(&hsotg->lock, flags); - return 0; -} - -/** - * on_list - check request is on the given endpoint - * @ep: The endpoint to check. - * @test: The request to test if it is on the endpoint. - */ -static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test) -{ - struct s3c_hsotg_req *req, *treq; - - list_for_each_entry_safe(req, treq, &ep->queue, queue) { - if (req == test) - return true; - } - - return false; -} - -/** - * s3c_hsotg_ep_dequeue - dequeue given endpoint - * @ep: The endpoint to dequeue. - * @req: The request to be removed from a queue. - */ -static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) -{ - struct s3c_hsotg_req *hs_req = our_req(req); - struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hs = hs_ep->parent; - unsigned long flags; - - dev_info(hs->dev, "ep_dequeue(%p,%p)\n", ep, req); - - spin_lock_irqsave(&hs->lock, flags); - - if (!on_list(hs_ep, hs_req)) { - spin_unlock_irqrestore(&hs->lock, flags); - return -EINVAL; - } - - s3c_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET); - spin_unlock_irqrestore(&hs->lock, flags); - - return 0; -} - -/** - * s3c_hsotg_ep_sethalt - set halt on a given endpoint - * @ep: The endpoint to set halt. - * @value: Set or unset the halt. - */ -static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) -{ - struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hs = hs_ep->parent; - int index = hs_ep->index; - u32 epreg; - u32 epctl; - u32 xfertype; - - dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value); - - if (index == 0) { - if (value) - s3c_hsotg_stall_ep0(hs); - else - dev_warn(hs->dev, - "%s: can't clear halt on ep0\n", __func__); - return 0; - } - - /* write both IN and OUT control registers */ - - epreg = DIEPCTL(index); - epctl = readl(hs->regs + epreg); - - if (value) { - epctl |= DxEPCTL_Stall + DxEPCTL_SNAK; - if (epctl & DxEPCTL_EPEna) - epctl |= DxEPCTL_EPDis; - } else { - epctl &= ~DxEPCTL_Stall; - xfertype = epctl & DxEPCTL_EPType_MASK; - if (xfertype == DxEPCTL_EPType_Bulk || - xfertype == DxEPCTL_EPType_Intterupt) - epctl |= DxEPCTL_SetD0PID; - } - - writel(epctl, hs->regs + epreg); - - epreg = DOEPCTL(index); - epctl = readl(hs->regs + epreg); - - if (value) - epctl |= DxEPCTL_Stall; - else { - epctl &= ~DxEPCTL_Stall; - xfertype = epctl & DxEPCTL_EPType_MASK; - if (xfertype == DxEPCTL_EPType_Bulk || - xfertype == DxEPCTL_EPType_Intterupt) - epctl |= DxEPCTL_SetD0PID; - } - - writel(epctl, hs->regs + epreg); - - hs_ep->halted = value; - - return 0; -} - -/** - * s3c_hsotg_ep_sethalt_lock - set halt on a given endpoint with lock held - * @ep: The endpoint to set halt. - * @value: Set or unset the halt. - */ -static int s3c_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value) -{ - struct s3c_hsotg_ep *hs_ep = our_ep(ep); - struct s3c_hsotg *hs = hs_ep->parent; - unsigned long flags = 0; - int ret = 0; - - spin_lock_irqsave(&hs->lock, flags); - ret = s3c_hsotg_ep_sethalt(ep, value); - spin_unlock_irqrestore(&hs->lock, flags); - - return ret; -} - -static struct usb_ep_ops s3c_hsotg_ep_ops = { - .enable = s3c_hsotg_ep_enable, - .disable = s3c_hsotg_ep_disable, - .alloc_request = s3c_hsotg_ep_alloc_request, - .free_request = s3c_hsotg_ep_free_request, - .queue = s3c_hsotg_ep_queue_lock, - .dequeue = s3c_hsotg_ep_dequeue, - .set_halt = s3c_hsotg_ep_sethalt_lock, - /* note, don't believe we have any call for the fifo routines */ -}; - -/** - * s3c_hsotg_phy_enable - enable platform phy dev - * @hsotg: The driver state - * - * A wrapper for platform code responsible for controlling - * low-level USB code - */ -static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg) -{ - struct platform_device *pdev = to_platform_device(hsotg->dev); - - dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev); - - if (hsotg->phy) { - phy_init(hsotg->phy); - phy_power_on(hsotg->phy); - } else if (hsotg->uphy) - usb_phy_init(hsotg->uphy); - else if (hsotg->plat->phy_init) - hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); -} - -/** - * s3c_hsotg_phy_disable - disable platform phy dev - * @hsotg: The driver state - * - * A wrapper for platform code responsible for controlling - * low-level USB code - */ -static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg) -{ - struct platform_device *pdev = to_platform_device(hsotg->dev); - - if (hsotg->phy) { - phy_power_off(hsotg->phy); - phy_exit(hsotg->phy); - } else if (hsotg->uphy) - usb_phy_shutdown(hsotg->uphy); - else if (hsotg->plat->phy_exit) - hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); -} - -/** - * s3c_hsotg_init - initalize the usb core - * @hsotg: The driver state - */ -static void s3c_hsotg_init(struct s3c_hsotg *hsotg) -{ - /* unmask subset of endpoint interrupts */ - - writel(DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk | - DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk, - hsotg->regs + DIEPMSK); - - writel(DOEPMSK_SetupMsk | DOEPMSK_AHBErrMsk | - DOEPMSK_EPDisbldMsk | DOEPMSK_XferComplMsk, - hsotg->regs + DOEPMSK); - - writel(0, hsotg->regs + DAINTMSK); - - /* Be in disconnected state until gadget is registered */ - __orr32(hsotg->regs + DCTL, DCTL_SftDiscon); - - if (0) { - /* post global nak until we're ready */ - writel(DCTL_SGNPInNAK | DCTL_SGOUTNak, - hsotg->regs + DCTL); - } - - /* setup fifos */ - - dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", - readl(hsotg->regs + GRXFSIZ), - readl(hsotg->regs + GNPTXFSIZ)); - - s3c_hsotg_init_fifo(hsotg); - - /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) | (0x5 << 10), - hsotg->regs + GUSBCFG); - - writel(using_dma(hsotg) ? GAHBCFG_DMAEn : 0x0, - hsotg->regs + GAHBCFG); -} - -/** - * s3c_hsotg_udc_start - prepare the udc for work - * @gadget: The usb gadget state - * @driver: The usb gadget driver - * - * Perform initialization to prepare udc device and driver - * to work. - */ -static int s3c_hsotg_udc_start(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) -{ - struct s3c_hsotg *hsotg = to_hsotg(gadget); - int ret; - - if (!hsotg) { - pr_err("%s: called with no device\n", __func__); - return -ENODEV; - } - - if (!driver) { - dev_err(hsotg->dev, "%s: no driver\n", __func__); - return -EINVAL; - } - - if (driver->max_speed < USB_SPEED_FULL) - dev_err(hsotg->dev, "%s: bad speed\n", __func__); - - if (!driver->setup) { - dev_err(hsotg->dev, "%s: missing entry points\n", __func__); - return -EINVAL; - } - - WARN_ON(hsotg->driver); - - driver->driver.bus = NULL; - hsotg->driver = driver; - hsotg->gadget.dev.of_node = hsotg->dev->of_node; - hsotg->gadget.speed = USB_SPEED_UNKNOWN; - - ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), - hsotg->supplies); - if (ret) { - dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret); - goto err; - } - - hsotg->last_rst = jiffies; - dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name); - return 0; - -err: - hsotg->driver = NULL; - return ret; -} - -/** - * s3c_hsotg_udc_stop - stop the udc - * @gadget: The usb gadget state - * @driver: The usb gadget driver - * - * Stop udc hw block and stay tunned for future transmissions - */ -static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) -{ - struct s3c_hsotg *hsotg = to_hsotg(gadget); - unsigned long flags = 0; - int ep; - - if (!hsotg) - return -ENODEV; - - /* all endpoints should be shutdown */ - for (ep = 0; ep < hsotg->num_of_eps; ep++) - s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); - - spin_lock_irqsave(&hsotg->lock, flags); - - s3c_hsotg_phy_disable(hsotg); - - if (!driver) - hsotg->driver = NULL; - - hsotg->gadget.speed = USB_SPEED_UNKNOWN; - - spin_unlock_irqrestore(&hsotg->lock, flags); - - regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); - - return 0; -} - -/** - * s3c_hsotg_gadget_getframe - read the frame number - * @gadget: The usb gadget state - * - * Read the {micro} frame number - */ -static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget) -{ - return s3c_hsotg_read_frameno(to_hsotg(gadget)); -} - -/** - * s3c_hsotg_pullup - connect/disconnect the USB PHY - * @gadget: The usb gadget state - * @is_on: Current state of the USB PHY - * - * Connect/Disconnect the USB PHY pullup - */ -static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on) -{ - struct s3c_hsotg *hsotg = to_hsotg(gadget); - unsigned long flags = 0; - - dev_dbg(hsotg->dev, "%s: is_in: %d\n", __func__, is_on); - - spin_lock_irqsave(&hsotg->lock, flags); - if (is_on) { - s3c_hsotg_phy_enable(hsotg); - s3c_hsotg_core_init(hsotg); - } else { - s3c_hsotg_disconnect(hsotg); - s3c_hsotg_phy_disable(hsotg); - } - - hsotg->gadget.speed = USB_SPEED_UNKNOWN; - spin_unlock_irqrestore(&hsotg->lock, flags); - - return 0; -} - -static const struct usb_gadget_ops s3c_hsotg_gadget_ops = { - .get_frame = s3c_hsotg_gadget_getframe, - .udc_start = s3c_hsotg_udc_start, - .udc_stop = s3c_hsotg_udc_stop, - .pullup = s3c_hsotg_pullup, -}; - -/** - * s3c_hsotg_initep - initialise a single endpoint - * @hsotg: The device state. - * @hs_ep: The endpoint to be initialised. - * @epnum: The endpoint number - * - * Initialise the given endpoint (as part of the probe and device state - * creation) to give to the gadget driver. Setup the endpoint name, any - * direction information and other state that may be required. - */ -static void s3c_hsotg_initep(struct s3c_hsotg *hsotg, - struct s3c_hsotg_ep *hs_ep, - int epnum) -{ - u32 ptxfifo; - char *dir; - - if (epnum == 0) - dir = ""; - else if ((epnum % 2) == 0) { - dir = "out"; - } else { - dir = "in"; - hs_ep->dir_in = 1; - } - - hs_ep->index = epnum; - - snprintf(hs_ep->name, sizeof(hs_ep->name), "ep%d%s", epnum, dir); - - INIT_LIST_HEAD(&hs_ep->queue); - INIT_LIST_HEAD(&hs_ep->ep.ep_list); - - /* add to the list of endpoints known by the gadget driver */ - if (epnum) - list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list); - - hs_ep->parent = hsotg; - hs_ep->ep.name = hs_ep->name; - usb_ep_set_maxpacket_limit(&hs_ep->ep, epnum ? 1024 : EP0_MPS_LIMIT); - hs_ep->ep.ops = &s3c_hsotg_ep_ops; - - /* - * Read the FIFO size for the Periodic TX FIFO, even if we're - * an OUT endpoint, we may as well do this if in future the - * code is changed to make each endpoint's direction changeable. - */ - - ptxfifo = readl(hsotg->regs + DPTXFSIZn(epnum)); - hs_ep->fifo_size = DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4; - - /* - * if we're using dma, we need to set the next-endpoint pointer - * to be something valid. - */ - - if (using_dma(hsotg)) { - u32 next = DxEPCTL_NextEp((epnum + 1) % 15); - writel(next, hsotg->regs + DIEPCTL(epnum)); - writel(next, hsotg->regs + DOEPCTL(epnum)); - } -} - -/** - * s3c_hsotg_hw_cfg - read HW configuration registers - * @param: The device state - * - * Read the USB core HW configuration registers - */ -static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg) -{ - u32 cfg2, cfg4; - /* check hardware configuration */ - - cfg2 = readl(hsotg->regs + 0x48); - hsotg->num_of_eps = (cfg2 >> 10) & 0xF; - - dev_info(hsotg->dev, "EPs:%d\n", hsotg->num_of_eps); - - cfg4 = readl(hsotg->regs + 0x50); - hsotg->dedicated_fifos = (cfg4 >> 25) & 1; - - dev_info(hsotg->dev, "%s fifos\n", - hsotg->dedicated_fifos ? "dedicated" : "shared"); -} - -/** - * s3c_hsotg_dump - dump state of the udc - * @param: The device state - */ -static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) -{ -#ifdef DEBUG - struct device *dev = hsotg->dev; - void __iomem *regs = hsotg->regs; - u32 val; - int idx; - - dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n", - readl(regs + DCFG), readl(regs + DCTL), - readl(regs + DIEPMSK)); - - dev_info(dev, "GAHBCFG=0x%08x, 0x44=0x%08x\n", - readl(regs + GAHBCFG), readl(regs + 0x44)); - - dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", - readl(regs + GRXFSIZ), readl(regs + GNPTXFSIZ)); - - /* show periodic fifo settings */ - - for (idx = 1; idx <= 15; idx++) { - val = readl(regs + DPTXFSIZn(idx)); - dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx, - val >> DPTXFSIZn_DPTxFSize_SHIFT, - val & DPTXFSIZn_DPTxFStAddr_MASK); - } - - for (idx = 0; idx < 15; idx++) { - dev_info(dev, - "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx, - readl(regs + DIEPCTL(idx)), - readl(regs + DIEPTSIZ(idx)), - readl(regs + DIEPDMA(idx))); - - val = readl(regs + DOEPCTL(idx)); - dev_info(dev, - "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", - idx, readl(regs + DOEPCTL(idx)), - readl(regs + DOEPTSIZ(idx)), - readl(regs + DOEPDMA(idx))); - - } - - dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n", - readl(regs + DVBUSDIS), readl(regs + DVBUSPULSE)); -#endif -} - -/** - * state_show - debugfs: show overall driver and device state. - * @seq: The seq file to write to. - * @v: Unused parameter. - * - * This debugfs entry shows the overall state of the hardware and - * some general information about each of the endpoints available - * to the system. - */ -static int state_show(struct seq_file *seq, void *v) -{ - struct s3c_hsotg *hsotg = seq->private; - void __iomem *regs = hsotg->regs; - int idx; - - seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n", - readl(regs + DCFG), - readl(regs + DCTL), - readl(regs + DSTS)); - - seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n", - readl(regs + DIEPMSK), readl(regs + DOEPMSK)); - - seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n", - readl(regs + GINTMSK), - readl(regs + GINTSTS)); - - seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n", - readl(regs + DAINTMSK), - readl(regs + DAINT)); - - seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n", - readl(regs + GNPTXSTS), - readl(regs + GRXSTSR)); - - seq_puts(seq, "\nEndpoint status:\n"); - - for (idx = 0; idx < 15; idx++) { - u32 in, out; - - in = readl(regs + DIEPCTL(idx)); - out = readl(regs + DOEPCTL(idx)); - - seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x", - idx, in, out); - - in = readl(regs + DIEPTSIZ(idx)); - out = readl(regs + DOEPTSIZ(idx)); - - seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x", - in, out); - - seq_puts(seq, "\n"); - } - - return 0; -} - -static int state_open(struct inode *inode, struct file *file) -{ - return single_open(file, state_show, inode->i_private); -} - -static const struct file_operations state_fops = { - .owner = THIS_MODULE, - .open = state_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/** - * fifo_show - debugfs: show the fifo information - * @seq: The seq_file to write data to. - * @v: Unused parameter. - * - * Show the FIFO information for the overall fifo and all the - * periodic transmission FIFOs. - */ -static int fifo_show(struct seq_file *seq, void *v) -{ - struct s3c_hsotg *hsotg = seq->private; - void __iomem *regs = hsotg->regs; - u32 val; - int idx; - - seq_puts(seq, "Non-periodic FIFOs:\n"); - seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ)); - - val = readl(regs + GNPTXFSIZ); - seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n", - val >> GNPTXFSIZ_NPTxFDep_SHIFT, - val & GNPTXFSIZ_NPTxFStAddr_MASK); - - seq_puts(seq, "\nPeriodic TXFIFOs:\n"); - - for (idx = 1; idx <= 15; idx++) { - val = readl(regs + DPTXFSIZn(idx)); - - seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx, - val >> DPTXFSIZn_DPTxFSize_SHIFT, - val & DPTXFSIZn_DPTxFStAddr_MASK); - } - - return 0; -} - -static int fifo_open(struct inode *inode, struct file *file) -{ - return single_open(file, fifo_show, inode->i_private); -} - -static const struct file_operations fifo_fops = { - .owner = THIS_MODULE, - .open = fifo_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - - -static const char *decode_direction(int is_in) -{ - return is_in ? "in" : "out"; -} - -/** - * ep_show - debugfs: show the state of an endpoint. - * @seq: The seq_file to write data to. - * @v: Unused parameter. - * - * This debugfs entry shows the state of the given endpoint (one is - * registered for each available). - */ -static int ep_show(struct seq_file *seq, void *v) -{ - struct s3c_hsotg_ep *ep = seq->private; - struct s3c_hsotg *hsotg = ep->parent; - struct s3c_hsotg_req *req; - void __iomem *regs = hsotg->regs; - int index = ep->index; - int show_limit = 15; - unsigned long flags; - - seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n", - ep->index, ep->ep.name, decode_direction(ep->dir_in)); - - /* first show the register state */ - - seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n", - readl(regs + DIEPCTL(index)), - readl(regs + DOEPCTL(index))); - - seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n", - readl(regs + DIEPDMA(index)), - readl(regs + DOEPDMA(index))); - - seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n", - readl(regs + DIEPINT(index)), - readl(regs + DOEPINT(index))); - - seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n", - readl(regs + DIEPTSIZ(index)), - readl(regs + DOEPTSIZ(index))); - - seq_puts(seq, "\n"); - seq_printf(seq, "mps %d\n", ep->ep.maxpacket); - seq_printf(seq, "total_data=%ld\n", ep->total_data); - - seq_printf(seq, "request list (%p,%p):\n", - ep->queue.next, ep->queue.prev); - - spin_lock_irqsave(&hsotg->lock, flags); - - list_for_each_entry(req, &ep->queue, queue) { - if (--show_limit < 0) { - seq_puts(seq, "not showing more requests...\n"); - break; - } - - seq_printf(seq, "%c req %p: %d bytes @%p, ", - req == ep->req ? '*' : ' ', - req, req->req.length, req->req.buf); - seq_printf(seq, "%d done, res %d\n", - req->req.actual, req->req.status); - } - - spin_unlock_irqrestore(&hsotg->lock, flags); - - return 0; -} - -static int ep_open(struct inode *inode, struct file *file) -{ - return single_open(file, ep_show, inode->i_private); -} - -static const struct file_operations ep_fops = { - .owner = THIS_MODULE, - .open = ep_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/** - * s3c_hsotg_create_debug - create debugfs directory and files - * @hsotg: The driver state - * - * Create the debugfs files to allow the user to get information - * about the state of the system. The directory name is created - * with the same name as the device itself, in case we end up - * with multiple blocks in future systems. - */ -static void s3c_hsotg_create_debug(struct s3c_hsotg *hsotg) -{ - struct dentry *root; - unsigned epidx; - - root = debugfs_create_dir(dev_name(hsotg->dev), NULL); - hsotg->debug_root = root; - if (IS_ERR(root)) { - dev_err(hsotg->dev, "cannot create debug root\n"); - return; - } - - /* create general state file */ - - hsotg->debug_file = debugfs_create_file("state", 0444, root, - hsotg, &state_fops); - - if (IS_ERR(hsotg->debug_file)) - dev_err(hsotg->dev, "%s: failed to create state\n", __func__); - - hsotg->debug_fifo = debugfs_create_file("fifo", 0444, root, - hsotg, &fifo_fops); - - if (IS_ERR(hsotg->debug_fifo)) - dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__); - - /* create one file for each endpoint */ - - for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { - struct s3c_hsotg_ep *ep = &hsotg->eps[epidx]; - - ep->debugfs = debugfs_create_file(ep->name, 0444, - root, ep, &ep_fops); - - if (IS_ERR(ep->debugfs)) - dev_err(hsotg->dev, "failed to create %s debug file\n", - ep->name); - } -} - -/** - * s3c_hsotg_delete_debug - cleanup debugfs entries - * @hsotg: The driver state - * - * Cleanup (remove) the debugfs files for use on module exit. - */ -static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) -{ - unsigned epidx; - - for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { - struct s3c_hsotg_ep *ep = &hsotg->eps[epidx]; - debugfs_remove(ep->debugfs); - } - - debugfs_remove(hsotg->debug_file); - debugfs_remove(hsotg->debug_fifo); - debugfs_remove(hsotg->debug_root); -} - -/** - * s3c_hsotg_probe - probe function for hsotg driver - * @pdev: The platform information for the driver - */ - -static int s3c_hsotg_probe(struct platform_device *pdev) -{ - struct s3c_hsotg_plat *plat = dev_get_platdata(&pdev->dev); - struct phy *phy; - struct usb_phy *uphy; - struct device *dev = &pdev->dev; - struct s3c_hsotg_ep *eps; - struct s3c_hsotg *hsotg; - struct resource *res; - int epnum; - int ret; - int i; - - hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg), GFP_KERNEL); - if (!hsotg) { - dev_err(dev, "cannot get memory\n"); - return -ENOMEM; - } - - /* - * Attempt to find a generic PHY, then look for an old style - * USB PHY, finally fall back to pdata - */ - phy = devm_phy_get(&pdev->dev, "usb2-phy"); - if (IS_ERR(phy)) { - uphy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); - if (IS_ERR(uphy)) { - /* Fallback for pdata */ - plat = dev_get_platdata(&pdev->dev); - if (!plat) { - dev_err(&pdev->dev, - "no platform data or transceiver defined\n"); - return -EPROBE_DEFER; - } - hsotg->plat = plat; - } else - hsotg->uphy = uphy; - } else - hsotg->phy = phy; - - hsotg->dev = dev; - - hsotg->clk = devm_clk_get(&pdev->dev, "otg"); - if (IS_ERR(hsotg->clk)) { - dev_err(dev, "cannot get otg clock\n"); - return PTR_ERR(hsotg->clk); - } - - platform_set_drvdata(pdev, hsotg); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - hsotg->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(hsotg->regs)) { - ret = PTR_ERR(hsotg->regs); - goto err_clk; - } - - ret = platform_get_irq(pdev, 0); - if (ret < 0) { - dev_err(dev, "cannot find IRQ\n"); - goto err_clk; - } - - spin_lock_init(&hsotg->lock); - - hsotg->irq = ret; - - ret = devm_request_irq(&pdev->dev, hsotg->irq, s3c_hsotg_irq, 0, - dev_name(dev), hsotg); - if (ret < 0) { - dev_err(dev, "cannot claim IRQ\n"); - goto err_clk; - } - - dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq); - - hsotg->gadget.max_speed = USB_SPEED_HIGH; - hsotg->gadget.ops = &s3c_hsotg_gadget_ops; - hsotg->gadget.name = dev_name(dev); - - /* reset the system */ - - clk_prepare_enable(hsotg->clk); - - /* regulators */ - - for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++) - hsotg->supplies[i].supply = s3c_hsotg_supply_names[i]; - - ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies), - hsotg->supplies); - if (ret) { - dev_err(dev, "failed to request supplies: %d\n", ret); - goto err_clk; - } - - ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), - hsotg->supplies); - - if (ret) { - dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret); - goto err_supplies; - } - - /* Set default UTMI width */ - hsotg->phyif = GUSBCFG_PHYIf16; - - /* - * If using the generic PHY framework, check if the PHY bus - * width is 8-bit and set the phyif appropriately. - */ - if (hsotg->phy && (phy_get_bus_width(phy) == 8)) - hsotg->phyif = GUSBCFG_PHYIf8; - - if (hsotg->phy) - phy_init(hsotg->phy); - - /* usb phy enable */ - s3c_hsotg_phy_enable(hsotg); - - s3c_hsotg_corereset(hsotg); - s3c_hsotg_init(hsotg); - s3c_hsotg_hw_cfg(hsotg); - - /* hsotg->num_of_eps holds number of EPs other than ep0 */ - - if (hsotg->num_of_eps == 0) { - dev_err(dev, "wrong number of EPs (zero)\n"); - ret = -EINVAL; - goto err_supplies; - } - - eps = kcalloc(hsotg->num_of_eps + 1, sizeof(struct s3c_hsotg_ep), - GFP_KERNEL); - if (!eps) { - dev_err(dev, "cannot get memory\n"); - ret = -ENOMEM; - goto err_supplies; - } - - hsotg->eps = eps; - - /* setup endpoint information */ - - INIT_LIST_HEAD(&hsotg->gadget.ep_list); - hsotg->gadget.ep0 = &hsotg->eps[0].ep; - - /* allocate EP0 request */ - - hsotg->ctrl_req = s3c_hsotg_ep_alloc_request(&hsotg->eps[0].ep, - GFP_KERNEL); - if (!hsotg->ctrl_req) { - dev_err(dev, "failed to allocate ctrl req\n"); - ret = -ENOMEM; - goto err_ep_mem; - } - - /* initialise the endpoints now the core has been initialised */ - for (epnum = 0; epnum < hsotg->num_of_eps; epnum++) - s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum); - - /* disable power and clock */ - - ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), - hsotg->supplies); - if (ret) { - dev_err(hsotg->dev, "failed to disable supplies: %d\n", ret); - goto err_ep_mem; - } - - s3c_hsotg_phy_disable(hsotg); - - ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget); - if (ret) - goto err_ep_mem; - - s3c_hsotg_create_debug(hsotg); - - s3c_hsotg_dump(hsotg); - - return 0; - -err_ep_mem: - kfree(eps); -err_supplies: - s3c_hsotg_phy_disable(hsotg); -err_clk: - clk_disable_unprepare(hsotg->clk); - - return ret; -} - -/** - * s3c_hsotg_remove - remove function for hsotg driver - * @pdev: The platform information for the driver - */ -static int s3c_hsotg_remove(struct platform_device *pdev) -{ - struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); - - usb_del_gadget_udc(&hsotg->gadget); - - s3c_hsotg_delete_debug(hsotg); - - if (hsotg->driver) { - /* should have been done already by driver model core */ - usb_gadget_unregister_driver(hsotg->driver); - } - - s3c_hsotg_phy_disable(hsotg); - if (hsotg->phy) - phy_exit(hsotg->phy); - clk_disable_unprepare(hsotg->clk); - - return 0; -} - -static int s3c_hsotg_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); - unsigned long flags; - int ret = 0; - - if (hsotg->driver) - dev_info(hsotg->dev, "suspending usb gadget %s\n", - hsotg->driver->driver.name); - - spin_lock_irqsave(&hsotg->lock, flags); - s3c_hsotg_disconnect(hsotg); - s3c_hsotg_phy_disable(hsotg); - hsotg->gadget.speed = USB_SPEED_UNKNOWN; - spin_unlock_irqrestore(&hsotg->lock, flags); - - if (hsotg->driver) { - int ep; - for (ep = 0; ep < hsotg->num_of_eps; ep++) - s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); - - ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), - hsotg->supplies); - } - - return ret; -} - -static int s3c_hsotg_resume(struct platform_device *pdev) -{ - struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); - unsigned long flags; - int ret = 0; - - if (hsotg->driver) { - dev_info(hsotg->dev, "resuming usb gadget %s\n", - hsotg->driver->driver.name); - ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), - hsotg->supplies); - } - - spin_lock_irqsave(&hsotg->lock, flags); - hsotg->last_rst = jiffies; - s3c_hsotg_phy_enable(hsotg); - s3c_hsotg_core_init(hsotg); - spin_unlock_irqrestore(&hsotg->lock, flags); - - return ret; -} - -#ifdef CONFIG_OF -static const struct of_device_id s3c_hsotg_of_ids[] = { - { .compatible = "samsung,s3c6400-hsotg", }, - { .compatible = "snps,dwc2", }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, s3c_hsotg_of_ids); -#endif - -static struct platform_driver s3c_hsotg_driver = { - .driver = { - .name = "s3c-hsotg", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(s3c_hsotg_of_ids), - }, - .probe = s3c_hsotg_probe, - .remove = s3c_hsotg_remove, - .suspend = s3c_hsotg_suspend, - .resume = s3c_hsotg_resume, -}; - -module_platform_driver(s3c_hsotg_driver); - -MODULE_DESCRIPTION("Samsung S3C USB High-speed/OtG device"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:s3c-hsotg"); diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/s3c-hsotg.h deleted file mode 100644 index 85f549ff8c1f..000000000000 --- a/drivers/usb/gadget/s3c-hsotg.h +++ /dev/null @@ -1,378 +0,0 @@ -/* drivers/usb/gadget/s3c-hsotg.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * USB2.0 Highspeed/OtG Synopsis DWC2 device block registers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __REGS_USB_HSOTG_H -#define __REGS_USB_HSOTG_H __FILE__ - -#define HSOTG_REG(x) (x) - -#define GOTGCTL HSOTG_REG(0x000) -#define GOTGCTL_BSESVLD (1 << 19) -#define GOTGCTL_ASESVLD (1 << 18) -#define GOTGCTL_DBNC_SHORT (1 << 17) -#define GOTGCTL_CONID_B (1 << 16) -#define GOTGCTL_DEVHNPEN (1 << 11) -#define GOTGCTL_HSSETHNPEN (1 << 10) -#define GOTGCTL_HNPREQ (1 << 9) -#define GOTGCTL_HSTNEGSCS (1 << 8) -#define GOTGCTL_SESREQ (1 << 1) -#define GOTGCTL_SESREQSCS (1 << 0) - -#define GOTGINT HSOTG_REG(0x004) -#define GOTGINT_DbnceDone (1 << 19) -#define GOTGINT_ADevTOUTChg (1 << 18) -#define GOTGINT_HstNegDet (1 << 17) -#define GOTGINT_HstnegSucStsChng (1 << 9) -#define GOTGINT_SesReqSucStsChng (1 << 8) -#define GOTGINT_SesEndDet (1 << 2) - -#define GAHBCFG HSOTG_REG(0x008) -#define GAHBCFG_PTxFEmpLvl (1 << 8) -#define GAHBCFG_NPTxFEmpLvl (1 << 7) -#define GAHBCFG_DMAEn (1 << 5) -#define GAHBCFG_HBstLen_MASK (0xf << 1) -#define GAHBCFG_HBstLen_SHIFT (1) -#define GAHBCFG_HBstLen_Single (0x0 << 1) -#define GAHBCFG_HBstLen_Incr (0x1 << 1) -#define GAHBCFG_HBstLen_Incr4 (0x3 << 1) -#define GAHBCFG_HBstLen_Incr8 (0x5 << 1) -#define GAHBCFG_HBstLen_Incr16 (0x7 << 1) -#define GAHBCFG_GlblIntrEn (1 << 0) - -#define GUSBCFG HSOTG_REG(0x00C) -#define GUSBCFG_PHYLPClkSel (1 << 15) -#define GUSBCFG_HNPCap (1 << 9) -#define GUSBCFG_SRPCap (1 << 8) -#define GUSBCFG_PHYIf16 (1 << 3) -#define GUSBCFG_PHYIf8 (0 << 3) -#define GUSBCFG_TOutCal_MASK (0x7 << 0) -#define GUSBCFG_TOutCal_SHIFT (0) -#define GUSBCFG_TOutCal_LIMIT (0x7) -#define GUSBCFG_TOutCal(_x) ((_x) << 0) - -#define GRSTCTL HSOTG_REG(0x010) - -#define GRSTCTL_AHBIdle (1 << 31) -#define GRSTCTL_DMAReq (1 << 30) -#define GRSTCTL_TxFNum_MASK (0x1f << 6) -#define GRSTCTL_TxFNum_SHIFT (6) -#define GRSTCTL_TxFNum_LIMIT (0x1f) -#define GRSTCTL_TxFNum(_x) ((_x) << 6) -#define GRSTCTL_TxFFlsh (1 << 5) -#define GRSTCTL_RxFFlsh (1 << 4) -#define GRSTCTL_INTknQFlsh (1 << 3) -#define GRSTCTL_FrmCntrRst (1 << 2) -#define GRSTCTL_HSftRst (1 << 1) -#define GRSTCTL_CSftRst (1 << 0) - -#define GINTSTS HSOTG_REG(0x014) -#define GINTMSK HSOTG_REG(0x018) - -#define GINTSTS_WkUpInt (1 << 31) -#define GINTSTS_SessReqInt (1 << 30) -#define GINTSTS_DisconnInt (1 << 29) -#define GINTSTS_ConIDStsChng (1 << 28) -#define GINTSTS_PTxFEmp (1 << 26) -#define GINTSTS_HChInt (1 << 25) -#define GINTSTS_PrtInt (1 << 24) -#define GINTSTS_FetSusp (1 << 22) -#define GINTSTS_incompIP (1 << 21) -#define GINTSTS_IncomplSOIN (1 << 20) -#define GINTSTS_OEPInt (1 << 19) -#define GINTSTS_IEPInt (1 << 18) -#define GINTSTS_EPMis (1 << 17) -#define GINTSTS_EOPF (1 << 15) -#define GINTSTS_ISOutDrop (1 << 14) -#define GINTSTS_EnumDone (1 << 13) -#define GINTSTS_USBRst (1 << 12) -#define GINTSTS_USBSusp (1 << 11) -#define GINTSTS_ErlySusp (1 << 10) -#define GINTSTS_GOUTNakEff (1 << 7) -#define GINTSTS_GINNakEff (1 << 6) -#define GINTSTS_NPTxFEmp (1 << 5) -#define GINTSTS_RxFLvl (1 << 4) -#define GINTSTS_SOF (1 << 3) -#define GINTSTS_OTGInt (1 << 2) -#define GINTSTS_ModeMis (1 << 1) -#define GINTSTS_CurMod_Host (1 << 0) - -#define GRXSTSR HSOTG_REG(0x01C) -#define GRXSTSP HSOTG_REG(0x020) - -#define GRXSTS_FN_MASK (0x7f << 25) -#define GRXSTS_FN_SHIFT (25) - -#define GRXSTS_PktSts_MASK (0xf << 17) -#define GRXSTS_PktSts_SHIFT (17) -#define GRXSTS_PktSts_GlobalOutNAK (0x1 << 17) -#define GRXSTS_PktSts_OutRX (0x2 << 17) -#define GRXSTS_PktSts_OutDone (0x3 << 17) -#define GRXSTS_PktSts_SetupDone (0x4 << 17) -#define GRXSTS_PktSts_SetupRX (0x6 << 17) - -#define GRXSTS_DPID_MASK (0x3 << 15) -#define GRXSTS_DPID_SHIFT (15) -#define GRXSTS_ByteCnt_MASK (0x7ff << 4) -#define GRXSTS_ByteCnt_SHIFT (4) -#define GRXSTS_EPNum_MASK (0xf << 0) -#define GRXSTS_EPNum_SHIFT (0) - -#define GRXFSIZ HSOTG_REG(0x024) - -#define GNPTXFSIZ HSOTG_REG(0x028) - -#define GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16) -#define GNPTXFSIZ_NPTxFDep_SHIFT (16) -#define GNPTXFSIZ_NPTxFDep_LIMIT (0xffff) -#define GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16) -#define GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0) -#define GNPTXFSIZ_NPTxFStAddr_SHIFT (0) -#define GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff) -#define GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0) - -#define GNPTXSTS HSOTG_REG(0x02C) - -#define GNPTXSTS_NPtxQTop_MASK (0x7f << 24) -#define GNPTXSTS_NPtxQTop_SHIFT (24) - -#define GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16) -#define GNPTXSTS_NPTxQSpcAvail_SHIFT (16) -#define GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff) - -#define GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0) -#define GNPTXSTS_NPTxFSpcAvail_SHIFT (0) -#define GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff) - - -#define HPTXFSIZ HSOTG_REG(0x100) - -#define DPTXFSIZn(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4)) - -#define DPTXFSIZn_DPTxFSize_MASK (0xffff << 16) -#define DPTXFSIZn_DPTxFSize_SHIFT (16) -#define DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff) -#define DPTXFSIZn_DPTxFSize_LIMIT (0xffff) -#define DPTXFSIZn_DPTxFSize(_x) ((_x) << 16) - -#define DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0) -#define DPTXFSIZn_DPTxFStAddr_SHIFT (0) - -/* Device mode registers */ -#define DCFG HSOTG_REG(0x800) - -#define DCFG_EPMisCnt_MASK (0x1f << 18) -#define DCFG_EPMisCnt_SHIFT (18) -#define DCFG_EPMisCnt_LIMIT (0x1f) -#define DCFG_EPMisCnt(_x) ((_x) << 18) - -#define DCFG_PerFrInt_MASK (0x3 << 11) -#define DCFG_PerFrInt_SHIFT (11) -#define DCFG_PerFrInt_LIMIT (0x3) -#define DCFG_PerFrInt(_x) ((_x) << 11) - -#define DCFG_DevAddr_MASK (0x7f << 4) -#define DCFG_DevAddr_SHIFT (4) -#define DCFG_DevAddr_LIMIT (0x7f) -#define DCFG_DevAddr(_x) ((_x) << 4) - -#define DCFG_NZStsOUTHShk (1 << 2) - -#define DCFG_DevSpd_MASK (0x3 << 0) -#define DCFG_DevSpd_SHIFT (0) -#define DCFG_DevSpd_HS (0x0 << 0) -#define DCFG_DevSpd_FS (0x1 << 0) -#define DCFG_DevSpd_LS (0x2 << 0) -#define DCFG_DevSpd_FS48 (0x3 << 0) - -#define DCTL HSOTG_REG(0x804) - -#define DCTL_PWROnPrgDone (1 << 11) -#define DCTL_CGOUTNak (1 << 10) -#define DCTL_SGOUTNak (1 << 9) -#define DCTL_CGNPInNAK (1 << 8) -#define DCTL_SGNPInNAK (1 << 7) -#define DCTL_TstCtl_MASK (0x7 << 4) -#define DCTL_TstCtl_SHIFT (4) -#define DCTL_GOUTNakSts (1 << 3) -#define DCTL_GNPINNakSts (1 << 2) -#define DCTL_SftDiscon (1 << 1) -#define DCTL_RmtWkUpSig (1 << 0) - -#define DSTS HSOTG_REG(0x808) - -#define DSTS_SOFFN_MASK (0x3fff << 8) -#define DSTS_SOFFN_SHIFT (8) -#define DSTS_SOFFN_LIMIT (0x3fff) -#define DSTS_SOFFN(_x) ((_x) << 8) -#define DSTS_ErraticErr (1 << 3) -#define DSTS_EnumSpd_MASK (0x3 << 1) -#define DSTS_EnumSpd_SHIFT (1) -#define DSTS_EnumSpd_HS (0x0 << 1) -#define DSTS_EnumSpd_FS (0x1 << 1) -#define DSTS_EnumSpd_LS (0x2 << 1) -#define DSTS_EnumSpd_FS48 (0x3 << 1) - -#define DSTS_SuspSts (1 << 0) - -#define DIEPMSK HSOTG_REG(0x810) - -#define DIEPMSK_TxFIFOEmpty (1 << 7) -#define DIEPMSK_INEPNakEffMsk (1 << 6) -#define DIEPMSK_INTknEPMisMsk (1 << 5) -#define DIEPMSK_INTknTXFEmpMsk (1 << 4) -#define DIEPMSK_TimeOUTMsk (1 << 3) -#define DIEPMSK_AHBErrMsk (1 << 2) -#define DIEPMSK_EPDisbldMsk (1 << 1) -#define DIEPMSK_XferComplMsk (1 << 0) - -#define DOEPMSK HSOTG_REG(0x814) - -#define DOEPMSK_Back2BackSetup (1 << 6) -#define DOEPMSK_OUTTknEPdisMsk (1 << 4) -#define DOEPMSK_SetupMsk (1 << 3) -#define DOEPMSK_AHBErrMsk (1 << 2) -#define DOEPMSK_EPDisbldMsk (1 << 1) -#define DOEPMSK_XferComplMsk (1 << 0) - -#define DAINT HSOTG_REG(0x818) -#define DAINTMSK HSOTG_REG(0x81C) - -#define DAINT_OutEP_SHIFT (16) -#define DAINT_OutEP(x) (1 << ((x) + 16)) -#define DAINT_InEP(x) (1 << (x)) - -#define DTKNQR1 HSOTG_REG(0x820) -#define DTKNQR2 HSOTG_REG(0x824) -#define DTKNQR3 HSOTG_REG(0x830) -#define DTKNQR4 HSOTG_REG(0x834) - -#define DVBUSDIS HSOTG_REG(0x828) -#define DVBUSPULSE HSOTG_REG(0x82C) - -#define DIEPCTL0 HSOTG_REG(0x900) -#define DOEPCTL0 HSOTG_REG(0xB00) -#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20)) -#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20)) - -/* EP0 specialness: - * bits[29..28] - reserved (no SetD0PID, SetD1PID) - * bits[25..22] - should always be zero, this isn't a periodic endpoint - * bits[10..0] - MPS setting differenct for EP0 - */ -#define D0EPCTL_MPS_MASK (0x3 << 0) -#define D0EPCTL_MPS_SHIFT (0) -#define D0EPCTL_MPS_64 (0x0 << 0) -#define D0EPCTL_MPS_32 (0x1 << 0) -#define D0EPCTL_MPS_16 (0x2 << 0) -#define D0EPCTL_MPS_8 (0x3 << 0) - -#define DxEPCTL_EPEna (1 << 31) -#define DxEPCTL_EPDis (1 << 30) -#define DxEPCTL_SetD1PID (1 << 29) -#define DxEPCTL_SetOddFr (1 << 29) -#define DxEPCTL_SetD0PID (1 << 28) -#define DxEPCTL_SetEvenFr (1 << 28) -#define DxEPCTL_SNAK (1 << 27) -#define DxEPCTL_CNAK (1 << 26) -#define DxEPCTL_TxFNum_MASK (0xf << 22) -#define DxEPCTL_TxFNum_SHIFT (22) -#define DxEPCTL_TxFNum_LIMIT (0xf) -#define DxEPCTL_TxFNum(_x) ((_x) << 22) - -#define DxEPCTL_Stall (1 << 21) -#define DxEPCTL_Snp (1 << 20) -#define DxEPCTL_EPType_MASK (0x3 << 18) -#define DxEPCTL_EPType_SHIFT (18) -#define DxEPCTL_EPType_Control (0x0 << 18) -#define DxEPCTL_EPType_Iso (0x1 << 18) -#define DxEPCTL_EPType_Bulk (0x2 << 18) -#define DxEPCTL_EPType_Intterupt (0x3 << 18) - -#define DxEPCTL_NAKsts (1 << 17) -#define DxEPCTL_DPID (1 << 16) -#define DxEPCTL_EOFrNum (1 << 16) -#define DxEPCTL_USBActEp (1 << 15) -#define DxEPCTL_NextEp_MASK (0xf << 11) -#define DxEPCTL_NextEp_SHIFT (11) -#define DxEPCTL_NextEp_LIMIT (0xf) -#define DxEPCTL_NextEp(_x) ((_x) << 11) - -#define DxEPCTL_MPS_MASK (0x7ff << 0) -#define DxEPCTL_MPS_SHIFT (0) -#define DxEPCTL_MPS_LIMIT (0x7ff) -#define DxEPCTL_MPS(_x) ((_x) << 0) - -#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20)) -#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20)) - -#define DxEPINT_INEPNakEff (1 << 6) -#define DxEPINT_Back2BackSetup (1 << 6) -#define DxEPINT_INTknEPMis (1 << 5) -#define DxEPINT_INTknTXFEmp (1 << 4) -#define DxEPINT_OUTTknEPdis (1 << 4) -#define DxEPINT_Timeout (1 << 3) -#define DxEPINT_Setup (1 << 3) -#define DxEPINT_AHBErr (1 << 2) -#define DxEPINT_EPDisbld (1 << 1) -#define DxEPINT_XferCompl (1 << 0) - -#define DIEPTSIZ0 HSOTG_REG(0x910) - -#define DIEPTSIZ0_PktCnt_MASK (0x3 << 19) -#define DIEPTSIZ0_PktCnt_SHIFT (19) -#define DIEPTSIZ0_PktCnt_LIMIT (0x3) -#define DIEPTSIZ0_PktCnt(_x) ((_x) << 19) - -#define DIEPTSIZ0_XferSize_MASK (0x7f << 0) -#define DIEPTSIZ0_XferSize_SHIFT (0) -#define DIEPTSIZ0_XferSize_LIMIT (0x7f) -#define DIEPTSIZ0_XferSize(_x) ((_x) << 0) - -#define DOEPTSIZ0 HSOTG_REG(0xB10) -#define DOEPTSIZ0_SUPCnt_MASK (0x3 << 29) -#define DOEPTSIZ0_SUPCnt_SHIFT (29) -#define DOEPTSIZ0_SUPCnt_LIMIT (0x3) -#define DOEPTSIZ0_SUPCnt(_x) ((_x) << 29) - -#define DOEPTSIZ0_PktCnt (1 << 19) -#define DOEPTSIZ0_XferSize_MASK (0x7f << 0) -#define DOEPTSIZ0_XferSize_SHIFT (0) - -#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20)) -#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20)) - -#define DxEPTSIZ_MC_MASK (0x3 << 29) -#define DxEPTSIZ_MC_SHIFT (29) -#define DxEPTSIZ_MC_LIMIT (0x3) -#define DxEPTSIZ_MC(_x) ((_x) << 29) - -#define DxEPTSIZ_PktCnt_MASK (0x3ff << 19) -#define DxEPTSIZ_PktCnt_SHIFT (19) -#define DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff) -#define DxEPTSIZ_PktCnt_LIMIT (0x3ff) -#define DxEPTSIZ_PktCnt(_x) ((_x) << 19) - -#define DxEPTSIZ_XferSize_MASK (0x7ffff << 0) -#define DxEPTSIZ_XferSize_SHIFT (0) -#define DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff) -#define DxEPTSIZ_XferSize_LIMIT (0x7ffff) -#define DxEPTSIZ_XferSize(_x) ((_x) << 0) - -#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20)) -#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20)) -#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20)) - -#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000)) - -#endif /* __REGS_USB_HSOTG_H */ diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index dd9678f85c58..7987aa049fab 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -117,7 +117,8 @@ static int dprintk(int level, const char *fmt, ...) sizeof(printk_buf)-len, fmt, args); va_end(args); - return pr_debug("%s", printk_buf); + pr_debug("%s", printk_buf); + return len; } #else static int dprintk(int level, const char *fmt, ...) diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index a8898df131ed..648f9e489b39 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -43,7 +43,7 @@ struct usb_interface_descriptor fsg_intf_desc = { .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */ .iInterface = FSG_STRING_INTERFACE, }; -EXPORT_SYMBOL(fsg_intf_desc); +EXPORT_SYMBOL_GPL(fsg_intf_desc); /* * Three full-speed endpoint descriptors: bulk-in, bulk-out, and @@ -58,7 +58,7 @@ struct usb_endpoint_descriptor fsg_fs_bulk_in_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, /* wMaxPacketSize set by autoconfiguration */ }; -EXPORT_SYMBOL(fsg_fs_bulk_in_desc); +EXPORT_SYMBOL_GPL(fsg_fs_bulk_in_desc); struct usb_endpoint_descriptor fsg_fs_bulk_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -68,7 +68,7 @@ struct usb_endpoint_descriptor fsg_fs_bulk_out_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, /* wMaxPacketSize set by autoconfiguration */ }; -EXPORT_SYMBOL(fsg_fs_bulk_out_desc); +EXPORT_SYMBOL_GPL(fsg_fs_bulk_out_desc); struct usb_descriptor_header *fsg_fs_function[] = { (struct usb_descriptor_header *) &fsg_intf_desc, @@ -76,7 +76,7 @@ struct usb_descriptor_header *fsg_fs_function[] = { (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc, NULL, }; -EXPORT_SYMBOL(fsg_fs_function); +EXPORT_SYMBOL_GPL(fsg_fs_function); /* @@ -95,7 +95,7 @@ struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512), }; -EXPORT_SYMBOL(fsg_hs_bulk_in_desc); +EXPORT_SYMBOL_GPL(fsg_hs_bulk_in_desc); struct usb_endpoint_descriptor fsg_hs_bulk_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -106,7 +106,7 @@ struct usb_endpoint_descriptor fsg_hs_bulk_out_desc = { .wMaxPacketSize = cpu_to_le16(512), .bInterval = 1, /* NAK every 1 uframe */ }; -EXPORT_SYMBOL(fsg_hs_bulk_out_desc); +EXPORT_SYMBOL_GPL(fsg_hs_bulk_out_desc); struct usb_descriptor_header *fsg_hs_function[] = { @@ -115,7 +115,7 @@ struct usb_descriptor_header *fsg_hs_function[] = { (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc, NULL, }; -EXPORT_SYMBOL(fsg_hs_function); +EXPORT_SYMBOL_GPL(fsg_hs_function); struct usb_endpoint_descriptor fsg_ss_bulk_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -125,7 +125,7 @@ struct usb_endpoint_descriptor fsg_ss_bulk_in_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(1024), }; -EXPORT_SYMBOL(fsg_ss_bulk_in_desc); +EXPORT_SYMBOL_GPL(fsg_ss_bulk_in_desc); struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = { .bLength = sizeof(fsg_ss_bulk_in_comp_desc), @@ -133,7 +133,7 @@ struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = { /*.bMaxBurst = DYNAMIC, */ }; -EXPORT_SYMBOL(fsg_ss_bulk_in_comp_desc); +EXPORT_SYMBOL_GPL(fsg_ss_bulk_in_comp_desc); struct usb_endpoint_descriptor fsg_ss_bulk_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -143,7 +143,7 @@ struct usb_endpoint_descriptor fsg_ss_bulk_out_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(1024), }; -EXPORT_SYMBOL(fsg_ss_bulk_out_desc); +EXPORT_SYMBOL_GPL(fsg_ss_bulk_out_desc); struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { .bLength = sizeof(fsg_ss_bulk_in_comp_desc), @@ -151,7 +151,7 @@ struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { /*.bMaxBurst = DYNAMIC, */ }; -EXPORT_SYMBOL(fsg_ss_bulk_out_comp_desc); +EXPORT_SYMBOL_GPL(fsg_ss_bulk_out_comp_desc); struct usb_descriptor_header *fsg_ss_function[] = { (struct usb_descriptor_header *) &fsg_intf_desc, @@ -161,7 +161,7 @@ struct usb_descriptor_header *fsg_ss_function[] = { (struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc, NULL, }; -EXPORT_SYMBOL(fsg_ss_function); +EXPORT_SYMBOL_GPL(fsg_ss_function); /*-------------------------------------------------------------------------*/ @@ -179,7 +179,7 @@ void fsg_lun_close(struct fsg_lun *curlun) curlun->filp = NULL; } } -EXPORT_SYMBOL(fsg_lun_close); +EXPORT_SYMBOL_GPL(fsg_lun_close); int fsg_lun_open(struct fsg_lun *curlun, const char *filename) { @@ -278,7 +278,7 @@ out: fput(filp); return rc; } -EXPORT_SYMBOL(fsg_lun_open); +EXPORT_SYMBOL_GPL(fsg_lun_open); /*-------------------------------------------------------------------------*/ @@ -295,7 +295,7 @@ int fsg_lun_fsync_sub(struct fsg_lun *curlun) return 0; return vfs_fsync(filp, 1); } -EXPORT_SYMBOL(fsg_lun_fsync_sub); +EXPORT_SYMBOL_GPL(fsg_lun_fsync_sub); void store_cdrom_address(u8 *dest, int msf, u32 addr) { @@ -314,7 +314,7 @@ void store_cdrom_address(u8 *dest, int msf, u32 addr) put_unaligned_be32(addr, dest); } } -EXPORT_SYMBOL(store_cdrom_address); +EXPORT_SYMBOL_GPL(store_cdrom_address); /*-------------------------------------------------------------------------*/ @@ -325,13 +325,13 @@ ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf) ? curlun->ro : curlun->initially_ro); } -EXPORT_SYMBOL(fsg_show_ro); +EXPORT_SYMBOL_GPL(fsg_show_ro); ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf) { return sprintf(buf, "%u\n", curlun->nofua); } -EXPORT_SYMBOL(fsg_show_nofua); +EXPORT_SYMBOL_GPL(fsg_show_nofua); ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, char *buf) @@ -357,19 +357,19 @@ ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, up_read(filesem); return rc; } -EXPORT_SYMBOL(fsg_show_file); +EXPORT_SYMBOL_GPL(fsg_show_file); ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf) { return sprintf(buf, "%u\n", curlun->cdrom); } -EXPORT_SYMBOL(fsg_show_cdrom); +EXPORT_SYMBOL_GPL(fsg_show_cdrom); ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf) { return sprintf(buf, "%u\n", curlun->removable); } -EXPORT_SYMBOL(fsg_show_removable); +EXPORT_SYMBOL_GPL(fsg_show_removable); /* * The caller must hold fsg->filesem for reading when calling this function. @@ -410,7 +410,7 @@ ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem, return rc; } -EXPORT_SYMBOL(fsg_store_ro); +EXPORT_SYMBOL_GPL(fsg_store_ro); ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count) { @@ -429,7 +429,7 @@ ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count) return count; } -EXPORT_SYMBOL(fsg_store_nofua); +EXPORT_SYMBOL_GPL(fsg_store_nofua); ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, const char *buf, size_t count) @@ -460,7 +460,7 @@ ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, up_write(filesem); return (rc < 0 ? rc : count); } -EXPORT_SYMBOL(fsg_store_file); +EXPORT_SYMBOL_GPL(fsg_store_file); ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem, const char *buf, size_t count) @@ -483,7 +483,7 @@ ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem, return ret; } -EXPORT_SYMBOL(fsg_store_cdrom); +EXPORT_SYMBOL_GPL(fsg_store_cdrom); ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf, size_t count) @@ -499,6 +499,6 @@ ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf, return count; } -EXPORT_SYMBOL(fsg_store_removable); +EXPORT_SYMBOL_GPL(fsg_store_removable); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c index f058c0368d61..6cdb7a534f23 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.c +++ b/drivers/usb/gadget/tcm_usb_gadget.c @@ -1383,10 +1383,8 @@ static struct se_node_acl *usbg_alloc_fabric_acl(struct se_portal_group *se_tpg) struct usbg_nacl *nacl; nacl = kzalloc(sizeof(struct usbg_nacl), GFP_KERNEL); - if (!nacl) { - printk(KERN_ERR "Unable to allocate struct usbg_nacl\n"); + if (!nacl) return NULL; - } return &nacl->se_node_acl; } @@ -1561,10 +1559,8 @@ static struct se_portal_group *usbg_make_tpg( } tpg = kzalloc(sizeof(struct usbg_tpg), GFP_KERNEL); - if (!tpg) { - printk(KERN_ERR "Unable to allocate struct usbg_tpg"); + if (!tpg) return ERR_PTR(-ENOMEM); - } mutex_init(&tpg->tpg_mutex); atomic_set(&tpg->tpg_port_count, 0); tpg->workqueue = alloc_workqueue("tcm_usb_gadget", 0, 1); @@ -1613,10 +1609,8 @@ static struct se_wwn *usbg_make_tport( return ERR_PTR(-EINVAL); tport = kzalloc(sizeof(struct usbg_tport), GFP_KERNEL); - if (!(tport)) { - printk(KERN_ERR "Unable to allocate struct usbg_tport"); + if (!(tport)) return ERR_PTR(-ENOMEM); - } tport->tport_wwpn = wwpn; snprintf(tport->tport_name, sizeof(tport->tport_name), "%s", wnn_name); return &tport->tport_wwn; @@ -1727,10 +1721,8 @@ static int tcm_usbg_make_nexus(struct usbg_tpg *tpg, char *name) ret = -ENOMEM; tv_nexus = kzalloc(sizeof(*tv_nexus), GFP_KERNEL); - if (!tv_nexus) { - pr_err("Unable to allocate struct tcm_vhost_nexus\n"); + if (!tv_nexus) goto err_unlock; - } tv_nexus->tvn_se_sess = transport_init_session(TARGET_PROT_NORMAL); if (IS_ERR(tv_nexus->tvn_se_sess)) goto err_free; @@ -1851,7 +1843,7 @@ static int usbg_port_link(struct se_portal_group *se_tpg, struct se_lun *lun) struct usbg_tpg *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg); atomic_inc(&tpg->tpg_port_count); - smp_mb__after_atomic_inc(); + smp_mb__after_atomic(); return 0; } @@ -1861,7 +1853,7 @@ static void usbg_port_unlink(struct se_portal_group *se_tpg, struct usbg_tpg *tpg = container_of(se_tpg, struct usbg_tpg, se_tpg); atomic_dec(&tpg->tpg_port_count); - smp_mb__after_atomic_dec(); + smp_mb__after_atomic(); } static int usbg_check_stop_free(struct se_cmd *se_cmd) diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index b7d4f82872b7..fe0880d0873e 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -818,7 +818,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, return dev; } -EXPORT_SYMBOL(gether_setup_name); +EXPORT_SYMBOL_GPL(gether_setup_name); struct net_device *gether_setup_name_default(const char *netname) { @@ -855,7 +855,7 @@ struct net_device *gether_setup_name_default(const char *netname) return net; } -EXPORT_SYMBOL(gether_setup_name_default); +EXPORT_SYMBOL_GPL(gether_setup_name_default); int gether_register_netdev(struct net_device *net) { @@ -893,7 +893,7 @@ int gether_register_netdev(struct net_device *net) return status; } -EXPORT_SYMBOL(gether_register_netdev); +EXPORT_SYMBOL_GPL(gether_register_netdev); void gether_set_gadget(struct net_device *net, struct usb_gadget *g) { @@ -903,7 +903,7 @@ void gether_set_gadget(struct net_device *net, struct usb_gadget *g) dev->gadget = g; SET_NETDEV_DEV(net, &g->dev); } -EXPORT_SYMBOL(gether_set_gadget); +EXPORT_SYMBOL_GPL(gether_set_gadget); int gether_set_dev_addr(struct net_device *net, const char *dev_addr) { @@ -916,7 +916,7 @@ int gether_set_dev_addr(struct net_device *net, const char *dev_addr) memcpy(dev->dev_mac, new_addr, ETH_ALEN); return 0; } -EXPORT_SYMBOL(gether_set_dev_addr); +EXPORT_SYMBOL_GPL(gether_set_dev_addr); int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len) { @@ -925,7 +925,7 @@ int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len) dev = netdev_priv(net); return get_ether_addr_str(dev->dev_mac, dev_addr, len); } -EXPORT_SYMBOL(gether_get_dev_addr); +EXPORT_SYMBOL_GPL(gether_get_dev_addr); int gether_set_host_addr(struct net_device *net, const char *host_addr) { @@ -938,7 +938,7 @@ int gether_set_host_addr(struct net_device *net, const char *host_addr) memcpy(dev->host_mac, new_addr, ETH_ALEN); return 0; } -EXPORT_SYMBOL(gether_set_host_addr); +EXPORT_SYMBOL_GPL(gether_set_host_addr); int gether_get_host_addr(struct net_device *net, char *host_addr, int len) { @@ -947,7 +947,7 @@ int gether_get_host_addr(struct net_device *net, char *host_addr, int len) dev = netdev_priv(net); return get_ether_addr_str(dev->host_mac, host_addr, len); } -EXPORT_SYMBOL(gether_get_host_addr); +EXPORT_SYMBOL_GPL(gether_get_host_addr); int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len) { @@ -961,7 +961,7 @@ int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len) return strlen(host_addr); } -EXPORT_SYMBOL(gether_get_host_addr_cdc); +EXPORT_SYMBOL_GPL(gether_get_host_addr_cdc); void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN]) { @@ -970,7 +970,7 @@ void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN]) dev = netdev_priv(net); memcpy(host_mac, dev->host_mac, ETH_ALEN); } -EXPORT_SYMBOL(gether_get_host_addr_u8); +EXPORT_SYMBOL_GPL(gether_get_host_addr_u8); void gether_set_qmult(struct net_device *net, unsigned qmult) { @@ -979,7 +979,7 @@ void gether_set_qmult(struct net_device *net, unsigned qmult) dev = netdev_priv(net); dev->qmult = qmult; } -EXPORT_SYMBOL(gether_set_qmult); +EXPORT_SYMBOL_GPL(gether_set_qmult); unsigned gether_get_qmult(struct net_device *net) { @@ -988,7 +988,7 @@ unsigned gether_get_qmult(struct net_device *net) dev = netdev_priv(net); return dev->qmult; } -EXPORT_SYMBOL(gether_get_qmult); +EXPORT_SYMBOL_GPL(gether_get_qmult); int gether_get_ifname(struct net_device *net, char *name, int len) { @@ -997,7 +997,7 @@ int gether_get_ifname(struct net_device *net, char *name, int len) rtnl_unlock(); return strlen(name); } -EXPORT_SYMBOL(gether_get_ifname); +EXPORT_SYMBOL_GPL(gether_get_ifname); /** * gether_cleanup - remove Ethernet-over-USB device @@ -1014,7 +1014,7 @@ void gether_cleanup(struct eth_dev *dev) flush_work(&dev->work); free_netdev(dev->net); } -EXPORT_SYMBOL(gether_cleanup); +EXPORT_SYMBOL_GPL(gether_cleanup); /** * gether_connect - notify network layer that USB link is active @@ -1095,7 +1095,7 @@ fail0: return ERR_PTR(result); return dev->net; } -EXPORT_SYMBOL(gether_connect); +EXPORT_SYMBOL_GPL(gether_connect); /** * gether_disconnect - notify network layer that USB link is inactive @@ -1166,7 +1166,7 @@ void gether_disconnect(struct gether *link) dev->port_usb = NULL; spin_unlock(&dev->lock); } -EXPORT_SYMBOL(gether_disconnect); +EXPORT_SYMBOL_GPL(gether_disconnect); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Brownell"); diff --git a/drivers/usb/gadget/u_f.c b/drivers/usb/gadget/u_f.c index 63b6642c162b..c6276f0268ae 100644 --- a/drivers/usb/gadget/u_f.c +++ b/drivers/usb/gadget/u_f.c @@ -29,4 +29,4 @@ struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len) } return req; } -EXPORT_SYMBOL(alloc_ep_req); +EXPORT_SYMBOL_GPL(alloc_ep_req); diff --git a/drivers/usb/gadget/u_f.h b/drivers/usb/gadget/u_f.h index 71034c061fca..1d5f0eb68552 100644 --- a/drivers/usb/gadget/u_f.h +++ b/drivers/usb/gadget/u_f.h @@ -16,6 +16,32 @@ #ifndef __U_F_H__ #define __U_F_H__ +/* Variable Length Array Macros **********************************************/ +#define vla_group(groupname) size_t groupname##__next = 0 +#define vla_group_size(groupname) groupname##__next + +#define vla_item(groupname, type, name, n) \ + size_t groupname##_##name##__offset = ({ \ + size_t align_mask = __alignof__(type) - 1; \ + size_t offset = (groupname##__next + align_mask) & ~align_mask;\ + size_t size = (n) * sizeof(type); \ + groupname##__next = offset + size; \ + offset; \ + }) + +#define vla_item_with_sz(groupname, type, name, n) \ + size_t groupname##_##name##__sz = (n) * sizeof(type); \ + size_t groupname##_##name##__offset = ({ \ + size_t align_mask = __alignof__(type) - 1; \ + size_t offset = (groupname##__next + align_mask) & ~align_mask;\ + size_t size = groupname##_##name##__sz; \ + groupname##__next = offset + size; \ + offset; \ + }) + +#define vla_ptr(ptr, groupname, name) \ + ((void *) ((char *)ptr + groupname##_##name##__offset)) + struct usb_ep; struct usb_request; diff --git a/drivers/usb/gadget/u_os_desc.h b/drivers/usb/gadget/u_os_desc.h new file mode 100644 index 000000000000..ea5cf8c2da28 --- /dev/null +++ b/drivers/usb/gadget/u_os_desc.h @@ -0,0 +1,90 @@ +/* + * u_os_desc.h + * + * Utility definitions for "OS Descriptors" support + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __U_OS_DESC_H__ +#define __U_OS_DESC_H__ + +#include <asm/unaligned.h> +#include <linux/nls.h> + +#define USB_EXT_PROP_DW_SIZE 0 +#define USB_EXT_PROP_DW_PROPERTY_DATA_TYPE 4 +#define USB_EXT_PROP_W_PROPERTY_NAME_LENGTH 8 +#define USB_EXT_PROP_B_PROPERTY_NAME 10 +#define USB_EXT_PROP_DW_PROPERTY_DATA_LENGTH 10 +#define USB_EXT_PROP_B_PROPERTY_DATA 14 + +#define USB_EXT_PROP_RESERVED 0 +#define USB_EXT_PROP_UNICODE 1 +#define USB_EXT_PROP_UNICODE_ENV 2 +#define USB_EXT_PROP_BINARY 3 +#define USB_EXT_PROP_LE32 4 +#define USB_EXT_PROP_BE32 5 +#define USB_EXT_PROP_UNICODE_LINK 6 +#define USB_EXT_PROP_UNICODE_MULTI 7 + +static inline void usb_ext_prop_put_size(u8 *buf, int dw_size) +{ + put_unaligned_le32(dw_size, &buf[USB_EXT_PROP_DW_SIZE]); +} + +static inline void usb_ext_prop_put_type(u8 *buf, int type) +{ + put_unaligned_le32(type, &buf[USB_EXT_PROP_DW_PROPERTY_DATA_TYPE]); +} + +static inline int usb_ext_prop_put_name(u8 *buf, const char *name, int pnl) +{ + int result; + + put_unaligned_le16(pnl, &buf[USB_EXT_PROP_W_PROPERTY_NAME_LENGTH]); + result = utf8s_to_utf16s(name, strlen(name), UTF16_LITTLE_ENDIAN, + (wchar_t *) &buf[USB_EXT_PROP_B_PROPERTY_NAME], pnl - 2); + if (result < 0) + return result; + + put_unaligned_le16(0, &buf[USB_EXT_PROP_B_PROPERTY_NAME + pnl]); + + return pnl; +} + +static inline void usb_ext_prop_put_binary(u8 *buf, int pnl, const u8 *data, + int data_len) +{ + put_unaligned_le32(data_len, + &buf[USB_EXT_PROP_DW_PROPERTY_DATA_LENGTH + pnl]); + memcpy(&buf[USB_EXT_PROP_B_PROPERTY_DATA + pnl], data, data_len); +} + +static inline int usb_ext_prop_put_unicode(u8 *buf, int pnl, const char *string, + int data_len) +{ + int result; + put_unaligned_le32(data_len, + &buf[USB_EXT_PROP_DW_PROPERTY_DATA_LENGTH + pnl]); + + result = utf8s_to_utf16s(string, data_len >> 1, UTF16_LITTLE_ENDIAN, + (wchar_t *) &buf[USB_EXT_PROP_B_PROPERTY_DATA + pnl], + data_len - 2); + if (result < 0) + return result; + + put_unaligned_le16(0, + &buf[USB_EXT_PROP_B_PROPERTY_DATA + pnl + data_len]); + + return data_len; +} + +#endif /* __U_OS_DESC_H__ */ diff --git a/drivers/usb/gadget/u_rndis.h b/drivers/usb/gadget/u_rndis.h index 7291b15c9dce..e902aa42a297 100644 --- a/drivers/usb/gadget/u_rndis.h +++ b/drivers/usb/gadget/u_rndis.h @@ -26,6 +26,9 @@ struct f_rndis_opts { bool bound; bool borrowed_net; + struct usb_os_desc rndis_os_desc; + char rndis_ext_compat_id[16]; + /* * Read/write access to configfs attributes is handled by configfs. * diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 27768a7d986a..b0d98172bc07 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -428,6 +428,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) list_for_each_entry(udc, &udc_list, list) if (udc->driver == driver) { usb_gadget_remove_driver(udc); + usb_gadget_set_state(udc->gadget, + USB_STATE_NOTATTACHED); ret = 0; break; } diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c index 0bb5d50075de..1c29bc954db9 100644 --- a/drivers/usb/gadget/uvc_queue.c +++ b/drivers/usb/gadget/uvc_queue.c @@ -20,6 +20,7 @@ #include <linux/vmalloc.h> #include <linux/wait.h> +#include <media/v4l2-common.h> #include <media/videobuf2-vmalloc.h> #include "uvc.h" @@ -136,6 +137,8 @@ static int uvc_queue_init(struct uvc_video_queue *queue, queue->queue.buf_struct_size = sizeof(struct uvc_buffer); queue->queue.ops = &uvc_queue_qops; queue->queue.mem_ops = &vb2_vmalloc_memops; + queue->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC + | V4L2_BUF_FLAG_TSTAMP_SRC_EOF; ret = vb2_queue_init(&queue->queue); if (ret) return ret; @@ -379,14 +382,9 @@ static struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, else nextbuf = NULL; - /* - * FIXME: with videobuf2, the sequence number or timestamp fields - * are valid only for video capture devices and the UVC gadget usually - * is a video output device. Keeping these until the specs are clear on - * this aspect. - */ + buf->buf.v4l2_buf.field = V4L2_FIELD_NONE; buf->buf.v4l2_buf.sequence = queue->sequence++; - do_gettimeofday(&buf->buf.v4l2_buf.timestamp); + v4l2_get_timestamp(&buf->buf.v4l2_buf.timestamp); vb2_set_plane_payload(&buf->buf, 0, buf->bytesused); vb2_buffer_done(&buf->buf, VB2_BUF_STATE_DONE); |