diff options
Diffstat (limited to 'drivers/usb/host/ohci-pxa27x.c')
| -rw-r--r-- | drivers/usb/host/ohci-pxa27x.c | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c new file mode 100644 index 000000000000..6f3464a95779 --- /dev/null +++ b/drivers/usb/host/ohci-pxa27x.c @@ -0,0 +1,383 @@ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> + * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> + * (C) Copyright 2002 Hewlett-Packard Company + * + * Bus Glue for pxa27x + * + * Written by Christopher Hoover <ch@hpl.hp.com> + * Based on fragments of previous driver by Russell King et al. + * + * Modified for LH7A404 from ohci-sa1111.c + * by Durgesh Pattamatta <pattamattad@sharpsec.com> + * + * Modified for pxa27x from ohci-lh7a404.c + * by Nick Bane <nick@cecomputing.co.uk> 26-8-2004 + * + * This file is licenced under the GPL. + */ + +#include <linux/device.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/arch/pxa-regs.h> + + +#define PMM_NPS_MODE 1 +#define PMM_GLOBAL_MODE 2 +#define PMM_PERPORT_MODE 3 + +#define PXA_UHC_MAX_PORTNUM 3 + +#define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 ) + +static int pxa27x_ohci_pmm_state; + +/* + PMM_NPS_MODE -- PMM Non-power switching mode + Ports are powered continuously. + + PMM_GLOBAL_MODE -- PMM global switching mode + All ports are powered at the same time. + + PMM_PERPORT_MODE -- PMM per port switching mode + Ports are powered individually. + */ +static int pxa27x_ohci_select_pmm( int mode ) +{ + pxa27x_ohci_pmm_state = mode; + + switch ( mode ) { + case PMM_NPS_MODE: + UHCRHDA |= RH_A_NPS; + break; + case PMM_GLOBAL_MODE: + UHCRHDA &= ~(RH_A_NPS & RH_A_PSM); + break; + case PMM_PERPORT_MODE: + UHCRHDA &= ~(RH_A_NPS); + UHCRHDA |= RH_A_PSM; + + /* Set port power control mask bits, only 3 ports. */ + UHCRHDB |= (0x7<<17); + break; + default: + printk( KERN_ERR + "Invalid mode %d, set to non-power switch mode.\n", + mode ); + + pxa27x_ohci_pmm_state = PMM_NPS_MODE; + UHCRHDA |= RH_A_NPS; + } + + return 0; +} + +/* + If you select PMM_PERPORT_MODE, you should set the port power + */ +static int pxa27x_ohci_set_port_power( int port ) +{ + if ( (pxa27x_ohci_pmm_state==PMM_PERPORT_MODE) + && (port>0) && (port<PXA_UHC_MAX_PORTNUM) ) { + UHCRHPS(port) |= 0x100; + return 0; + } + return -1; +} + +/* + If you select PMM_PERPORT_MODE, you should set the port power + */ +static int pxa27x_ohci_clear_port_power( int port ) +{ + if ( (pxa27x_ohci_pmm_state==PMM_PERPORT_MODE) + && (port>0) && (port<PXA_UHC_MAX_PORTNUM) ) { + UHCRHPS(port) |= 0x200; + return 0; + } + + return -1; +} + +extern int usb_disabled(void); + +/*-------------------------------------------------------------------------*/ + +static void pxa27x_start_hc(struct platform_device *dev) +{ + pxa_set_cken(CKEN10_USBHOST, 1); + + UHCHR |= UHCHR_FHR; + udelay(11); + UHCHR &= ~UHCHR_FHR; + + UHCHR |= UHCHR_FSBIR; + while (UHCHR & UHCHR_FSBIR) + cpu_relax(); + + /* This could be properly abstracted away through the + device data the day more machines are supported and + their differences can be figured out correctly. */ + if (machine_is_mainstone()) { + /* setup Port1 GPIO pin. */ + pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ + pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ + + /* Set the Power Control Polarity Low and Power Sense + Polarity Low to active low. Supply power to USB ports. */ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + } + + UHCHR &= ~UHCHR_SSE; + + UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE); +} + +static void pxa27x_stop_hc(struct platform_device *dev) +{ + UHCHR |= UHCHR_FHR; + udelay(11); + UHCHR &= ~UHCHR_FHR; + + UHCCOMS |= 1; + udelay(10); + + pxa_set_cken(CKEN10_USBHOST, 0); +} + + +/*-------------------------------------------------------------------------*/ + +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ + + +/** + * usb_hcd_pxa27x_probe - initialize pxa27x-based HCDs + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + * + */ +int usb_hcd_pxa27x_probe (const struct hc_driver *driver, + struct platform_device *dev) +{ + int retval; + struct usb_hcd *hcd; + + if (dev->resource[1].flags != IORESOURCE_IRQ) { + pr_debug ("resource[1] is not IORESOURCE_IRQ"); + return -ENOMEM; + } + + hcd = usb_create_hcd (driver, &dev->dev, "pxa27x"); + if (!hcd) + return -ENOMEM; + hcd->rsrc_start = dev->resource[0].start; + hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + pr_debug("request_mem_region failed"); + retval = -EBUSY; + goto err1; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + pr_debug("ioremap failed"); + retval = -ENOMEM; + goto err2; + } + + pxa27x_start_hc(dev); + + /* Select Power Management Mode */ + pxa27x_ohci_select_pmm( PMM_PERPORT_MODE ); + + /* If choosing PMM_PERPORT_MODE, we should set the port power before we use it. */ + if (pxa27x_ohci_set_port_power(1) < 0) + printk(KERN_ERR "Setting port 1 power failed.\n"); + + if (pxa27x_ohci_clear_port_power(2) < 0) + printk(KERN_ERR "Setting port 2 power failed.\n"); + + if (pxa27x_ohci_clear_port_power(3) < 0) + printk(KERN_ERR "Setting port 3 power failed.\n"); + + ohci_hcd_init(hcd_to_ohci(hcd)); + + retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT); + if (retval == 0) + return retval; + + pxa27x_stop_hc(dev); + iounmap(hcd->regs); + err2: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + err1: + usb_put_hcd(hcd); + return retval; +} + + +/* may be called without controller electrically present */ +/* may be called with controller, bus, and devices active */ + +/** + * usb_hcd_pxa27x_remove - shutdown processing for pxa27x-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_pxa27x_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + * + */ +void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *dev) +{ + usb_remove_hcd(hcd); + pxa27x_stop_hc(dev); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); +} + +/*-------------------------------------------------------------------------*/ + +static int __devinit +ohci_pxa27x_start (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + int ret; + + ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci); + + if ((ret = ohci_init(ohci)) < 0) + return ret; + + if ((ret = ohci_run (ohci)) < 0) { + err ("can't start %s", hcd->self.bus_name); + ohci_stop (hcd); + return ret; + } + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static const struct hc_driver ohci_pxa27x_hc_driver = { + .description = hcd_name, + .product_desc = "PXA27x OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .start = ohci_pxa27x_start, + .stop = ohci_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_USB_SUSPEND + .hub_suspend = ohci_hub_suspend, + .hub_resume = ohci_hub_resume, +#endif +}; + +/*-------------------------------------------------------------------------*/ + +static int ohci_hcd_pxa27x_drv_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + int ret; + + pr_debug ("In ohci_hcd_pxa27x_drv_probe"); + + if (usb_disabled()) + return -ENODEV; + + ret = usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev); + return ret; +} + +static int ohci_hcd_pxa27x_drv_remove(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct usb_hcd *hcd = dev_get_drvdata(dev); + + usb_hcd_pxa27x_remove(hcd, pdev); + return 0; +} + +static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, u32 state, u32 level) +{ +// struct platform_device *pdev = to_platform_device(dev); +// struct usb_hcd *hcd = dev_get_drvdata(dev); + printk("%s: not implemented yet\n", __FUNCTION__); + + return 0; +} + +static int ohci_hcd_pxa27x_drv_resume(struct device *dev, u32 state) +{ +// struct platform_device *pdev = to_platform_device(dev); +// struct usb_hcd *hcd = dev_get_drvdata(dev); + printk("%s: not implemented yet\n", __FUNCTION__); + + return 0; +} + + +static struct device_driver ohci_hcd_pxa27x_driver = { + .name = "pxa27x-ohci", + .bus = &platform_bus_type, + .probe = ohci_hcd_pxa27x_drv_probe, + .remove = ohci_hcd_pxa27x_drv_remove, + .suspend = ohci_hcd_pxa27x_drv_suspend, + .resume = ohci_hcd_pxa27x_drv_resume, +}; + +static int __init ohci_hcd_pxa27x_init (void) +{ + pr_debug (DRIVER_INFO " (pxa27x)"); + pr_debug ("block sizes: ed %d td %d\n", + sizeof (struct ed), sizeof (struct td)); + + return driver_register(&ohci_hcd_pxa27x_driver); +} + +static void __exit ohci_hcd_pxa27x_cleanup (void) +{ + driver_unregister(&ohci_hcd_pxa27x_driver); +} + +module_init (ohci_hcd_pxa27x_init); +module_exit (ohci_hcd_pxa27x_cleanup); |