diff options
Diffstat (limited to 'drivers/usb/host/ohci-pxa27x.c')
| -rw-r--r-- | drivers/usb/host/ohci-pxa27x.c | 72 |
1 files changed, 70 insertions, 2 deletions
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index e1a3cc6d28dc..2bf11440b010 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -23,9 +23,11 @@ #include <linux/signal.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> #include <mach/hardware.h> -#include <mach/ohci.h> -#include <mach/pxa3xx-u2d.h> +#include <linux/platform_data/usb-ohci-pxa27x.h> +#include <linux/platform_data/usb-pxa3xx-ulpi.h> /* * UHC: USB Host Controller (OHCI-like) register definitions @@ -272,6 +274,67 @@ static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev) clk_disable_unprepare(ohci->clk); } +#ifdef CONFIG_OF +static const struct of_device_id pxa_ohci_dt_ids[] = { + { .compatible = "marvell,pxa-ohci" }, + { } +}; + +MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids); + +static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32); + +static int __devinit ohci_pxa_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct pxaohci_platform_data *pdata; + u32 tmp; + + if (!np) + return 0; + + /* Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &pxa_ohci_dma_mask; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + if (of_get_property(np, "marvell,enable-port1", NULL)) + pdata->flags |= ENABLE_PORT1; + if (of_get_property(np, "marvell,enable-port2", NULL)) + pdata->flags |= ENABLE_PORT2; + if (of_get_property(np, "marvell,enable-port3", NULL)) + pdata->flags |= ENABLE_PORT3; + if (of_get_property(np, "marvell,port-sense-low", NULL)) + pdata->flags |= POWER_SENSE_LOW; + if (of_get_property(np, "marvell,power-control-low", NULL)) + pdata->flags |= POWER_CONTROL_LOW; + if (of_get_property(np, "marvell,no-oc-protection", NULL)) + pdata->flags |= NO_OC_PROTECTION; + if (of_get_property(np, "marvell,oc-mode-perport", NULL)) + pdata->flags |= OC_MODE_PERPORT; + if (!of_property_read_u32(np, "marvell,power-on-delay", &tmp)) + pdata->power_on_delay = tmp; + if (!of_property_read_u32(np, "marvell,port-mode", &tmp)) + pdata->port_mode = tmp; + if (!of_property_read_u32(np, "marvell,power-budget", &tmp)) + pdata->power_budget = tmp; + + pdev->dev.platform_data = pdata; + + return 0; +} +#else +static int __devinit ohci_pxa_of_init(struct platform_device *pdev) +{ + return 0; +} +#endif /*-------------------------------------------------------------------------*/ @@ -297,6 +360,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device struct resource *r; struct clk *usb_clk; + retval = ohci_pxa_of_init(pdev); + if (retval) + return retval; + inf = pdev->dev.platform_data; if (!inf) @@ -544,6 +611,7 @@ static struct platform_driver ohci_hcd_pxa27x_driver = { .driver = { .name = "pxa27x-ohci", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(pxa_ohci_dt_ids), #ifdef CONFIG_PM .pm = &ohci_hcd_pxa27x_pm_ops, #endif |