diff options
Diffstat (limited to 'drivers/usb/host/xhci-rcar.c')
| -rw-r--r-- | drivers/usb/host/xhci-rcar.c | 43 |
1 files changed, 28 insertions, 15 deletions
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index f33ffc2bc4ed..a6e463715779 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -17,9 +17,8 @@ #include "xhci-rcar.h" /* -* - The V3 firmware is for r8a7796 (with good performance) and r8a7795 es2.0 -* or later. -* - The V2 firmware can be used on both r8a7795 (es1.x) and r8a7796. +* - The V3 firmware is for almost all R-Car Gen3 (except r8a7795 ES1.x) +* - The V2 firmware is for r8a7795 ES1.x. * - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes * performance degradation. So, this driver continues to use the V1 if R-Car * Gen2. @@ -30,6 +29,7 @@ MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2); MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3); /*** Register Offset ***/ +#define RCAR_USB3_AXH_STA 0x104 /* AXI Host Control Status */ #define RCAR_USB3_INT_ENA 0x224 /* Interrupt Enable */ #define RCAR_USB3_DL_CTRL 0x250 /* FW Download Control & Status */ #define RCAR_USB3_FW_DATA0 0x258 /* FW Data0 */ @@ -42,6 +42,12 @@ MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3); #define RCAR_USB3_TX_POL 0xab8 /* USB3.0 TX Polarity */ /*** Register Settings ***/ +/* AXI Host Control Status */ +#define RCAR_USB3_AXH_STA_B3_PLL_ACTIVE 0x00010000 +#define RCAR_USB3_AXH_STA_B2_PLL_ACTIVE 0x00000001 +#define RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK (RCAR_USB3_AXH_STA_B3_PLL_ACTIVE | \ + RCAR_USB3_AXH_STA_B2_PLL_ACTIVE) + /* Interrupt Enable */ #define RCAR_USB3_INT_XHC_ENA 0x00000001 #define RCAR_USB3_INT_PME_ENA 0x00000002 @@ -75,18 +81,6 @@ static const struct soc_device_attribute rcar_quirks_match[] = { .soc_id = "r8a7795", .revision = "ES1.*", .data = (void *)RCAR_XHCI_FIRMWARE_V2, }, - { - .soc_id = "r8a7795", - .data = (void *)RCAR_XHCI_FIRMWARE_V3, - }, - { - .soc_id = "r8a7796", - .data = (void *)RCAR_XHCI_FIRMWARE_V3, - }, - { - .soc_id = "r8a77965", - .data = (void *)RCAR_XHCI_FIRMWARE_V3, - }, { /* sentinel */ }, }; @@ -213,6 +207,22 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd) return retval; } +static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd) +{ + int timeout = 1000; + u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK; + + while (timeout > 0) { + val = readl(hcd->regs + RCAR_USB3_AXH_STA); + if ((val & mask) == mask) + return true; + udelay(1); + timeout--; + } + + return false; +} + /* This function needs to initialize a "phy" of usb before */ int xhci_rcar_init_quirk(struct usb_hcd *hcd) { @@ -233,6 +243,9 @@ int xhci_rcar_init_quirk(struct usb_hcd *hcd) xhci_rcar_is_gen3(hcd->self.controller)) xhci->quirks |= XHCI_NO_64BIT_SUPPORT; + if (!xhci_rcar_wait_for_pll_active(hcd)) + return -ETIMEDOUT; + return xhci_rcar_download_firmware(hcd); } |