1 files changed, 182 insertions, 69 deletions

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b4aa79d154b2..8be34f838bd4 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -218,7 +218,7 @@ static int xhci_setup_msi(struct xhci_hcd *xhci)
 		return ret;
 	}
 
-	ret = request_irq(pdev->irq, (irq_handler_t)xhci_msi_irq,
+	ret = request_irq(pdev->irq, xhci_msi_irq,
 				0, "xhci_hcd", xhci_to_hcd(xhci));
 	if (ret) {
 		xhci_dbg(xhci, "disable MSI interrupt\n");
@@ -290,7 +290,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
 
 	for (i = 0; i < xhci->msix_count; i++) {
 		ret = request_irq(xhci->msix_entries[i].vector,
-				(irq_handler_t)xhci_msi_irq,
+				xhci_msi_irq,
 				0, "xhci_hcd", xhci_to_hcd(xhci));
 		if (ret)
 			goto disable_msix;
@@ -1111,6 +1111,16 @@ unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc)
 	return index;
 }
 
+/* The reverse operation to xhci_get_endpoint_index. Calculate the USB endpoint
+ * address from the XHCI endpoint index.
+ */
+unsigned int xhci_get_endpoint_address(unsigned int ep_index)
+{
+	unsigned int number = DIV_ROUND_UP(ep_index, 2);
+	unsigned int direction = ep_index % 2 ? USB_DIR_OUT : USB_DIR_IN;
+	return direction | number;
+}
+
 /* Find the flag for this endpoint (for use in the control context).  Use the
  * endpoint index to create a bitmask.  The slot context is bit 0, endpoint 0 is
  * bit 1, etc.
@@ -3805,6 +3815,56 @@ int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
 	return raw_port;
 }
 
+/*
+ * Issue an Evaluate Context command to change the Maximum Exit Latency in the
+ * slot context.  If that succeeds, store the new MEL in the xhci_virt_device.
+ */
+static int xhci_change_max_exit_latency(struct xhci_hcd *xhci,
+			struct usb_device *udev, u16 max_exit_latency)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_command *command;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return 0;
+	}
+
+	/* Attempt to issue an Evaluate Context command to change the MEL. */
+	virt_dev = xhci->devs[udev->slot_id];
+	command = xhci->lpm_command;
+	xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+	slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx);
+	slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT));
+	slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency);
+
+	xhci_dbg(xhci, "Set up evaluate context for LPM MEL change.\n");
+	xhci_dbg(xhci, "Slot %u Input Context:\n", udev->slot_id);
+	xhci_dbg_ctx(xhci, command->in_ctx, 0);
+
+	/* Issue and wait for the evaluate context command. */
+	ret = xhci_configure_endpoint(xhci, udev, command,
+			true, true);
+	xhci_dbg(xhci, "Slot %u Output Context:\n", udev->slot_id);
+	xhci_dbg_ctx(xhci, virt_dev->out_ctx, 0);
+
+	if (!ret) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		virt_dev->current_mel = max_exit_latency;
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+	return ret;
+}
+
 #ifdef CONFIG_PM_RUNTIME
 
 /* BESL to HIRD Encoding array for USB2 LPM */
@@ -3846,6 +3906,28 @@ static int xhci_calculate_hird_besl(struct xhci_hcd *xhci,
 	return besl;
 }
 
+/* Calculate BESLD, L1 timeout and HIRDM for USB2 PORTHLPMC */
+static int xhci_calculate_usb2_hw_lpm_params(struct usb_device *udev)
+{
+	u32 field;
+	int l1;
+	int besld = 0;
+	int hirdm = 0;
+
+	field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
+
+	/* xHCI l1 is set in steps of 256us, xHCI 1.0 section 5.4.11.2 */
+	l1 = udev->l1_params.timeout / 256;
+
+	/* device has preferred BESLD */
+	if (field & USB_BESL_DEEP_VALID) {
+		besld = USB_GET_BESL_DEEP(field);
+		hirdm = 1;
+	}
+
+	return PORT_BESLD(besld) | PORT_L1_TIMEOUT(l1) | PORT_HIRDM(hirdm);
+}
+
 static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
 					struct usb_device *udev)
 {
@@ -3901,7 +3983,7 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
 	 * Check device's USB 2.0 extension descriptor to determine whether
 	 * HIRD or BESL shoule be used. See USB2.0 LPM errata.
 	 */
-	pm_addr = port_array[port_num] + 1;
+	pm_addr = port_array[port_num] + PORTPMSC;
 	hird = xhci_calculate_hird_besl(xhci, udev);
 	temp = PORT_L1DS(udev->slot_id) | PORT_HIRD(hird);
 	xhci_writel(xhci, temp, pm_addr);
@@ -3978,11 +4060,12 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	__le32 __iomem	**port_array;
-	__le32 __iomem	*pm_addr;
-	u32		temp;
+	__le32 __iomem	*pm_addr, *hlpm_addr;
+	u32		pm_val, hlpm_val, field;
 	unsigned int	port_num;
 	unsigned long	flags;
-	int		hird;
+	int		hird, exit_latency;
+	int		ret;
 
 	if (hcd->speed == HCD_USB3 || !xhci->hw_lpm_support ||
 			!udev->lpm_capable)
@@ -3999,40 +4082,120 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 
 	port_array = xhci->usb2_ports;
 	port_num = udev->portnum - 1;
-	pm_addr = port_array[port_num] + 1;
-	temp = xhci_readl(xhci, pm_addr);
+	pm_addr = port_array[port_num] + PORTPMSC;
+	pm_val = xhci_readl(xhci, pm_addr);
+	hlpm_addr = port_array[port_num] + PORTHLPMC;
+	field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
 
 	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
 			enable ? "enable" : "disable", port_num);
 
-	hird = xhci_calculate_hird_besl(xhci, udev);
-
 	if (enable) {
-		temp &= ~PORT_HIRD_MASK;
-		temp |= PORT_HIRD(hird) | PORT_RWE;
-		xhci_writel(xhci, temp, pm_addr);
-		temp = xhci_readl(xhci, pm_addr);
-		temp |= PORT_HLE;
-		xhci_writel(xhci, temp, pm_addr);
+		/* Host supports BESL timeout instead of HIRD */
+		if (udev->usb2_hw_lpm_besl_capable) {
+			/* if device doesn't have a preferred BESL value use a
+			 * default one which works with mixed HIRD and BESL
+			 * systems. See XHCI_DEFAULT_BESL definition in xhci.h
+			 */
+			if ((field & USB_BESL_SUPPORT) &&
+			    (field & USB_BESL_BASELINE_VALID))
+				hird = USB_GET_BESL_BASELINE(field);
+			else
+				hird = udev->l1_params.besl;
+
+			exit_latency = xhci_besl_encoding[hird];
+			spin_unlock_irqrestore(&xhci->lock, flags);
+
+			/* USB 3.0 code dedicate one xhci->lpm_command->in_ctx
+			 * input context for link powermanagement evaluate
+			 * context commands. It is protected by hcd->bandwidth
+			 * mutex and is shared by all devices. We need to set
+			 * the max ext latency in USB 2 BESL LPM as well, so
+			 * use the same mutex and xhci_change_max_exit_latency()
+			 */
+			mutex_lock(hcd->bandwidth_mutex);
+			ret = xhci_change_max_exit_latency(xhci, udev,
+							   exit_latency);
+			mutex_unlock(hcd->bandwidth_mutex);
+
+			if (ret < 0)
+				return ret;
+			spin_lock_irqsave(&xhci->lock, flags);
+
+			hlpm_val = xhci_calculate_usb2_hw_lpm_params(udev);
+			xhci_writel(xhci, hlpm_val, hlpm_addr);
+			/* flush write */
+			xhci_readl(xhci, hlpm_addr);
+		} else {
+			hird = xhci_calculate_hird_besl(xhci, udev);
+		}
+
+		pm_val &= ~PORT_HIRD_MASK;
+		pm_val |= PORT_HIRD(hird) | PORT_RWE;
+		xhci_writel(xhci, pm_val, pm_addr);
+		pm_val = xhci_readl(xhci, pm_addr);
+		pm_val |= PORT_HLE;
+		xhci_writel(xhci, pm_val, pm_addr);
+		/* flush write */
+		xhci_readl(xhci, pm_addr);
 	} else {
-		temp &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK);
-		xhci_writel(xhci, temp, pm_addr);
+		pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK);
+		xhci_writel(xhci, pm_val, pm_addr);
+		/* flush write */
+		xhci_readl(xhci, pm_addr);
+		if (udev->usb2_hw_lpm_besl_capable) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			mutex_lock(hcd->bandwidth_mutex);
+			xhci_change_max_exit_latency(xhci, udev, 0);
+			mutex_unlock(hcd->bandwidth_mutex);
+			return 0;
+		}
 	}
 
 	spin_unlock_irqrestore(&xhci->lock, flags);
 	return 0;
 }
 
+/* check if a usb2 port supports a given extened capability protocol
+ * only USB2 ports extended protocol capability values are cached.
+ * Return 1 if capability is supported
+ */
+static int xhci_check_usb2_port_capability(struct xhci_hcd *xhci, int port,
+					   unsigned capability)
+{
+	u32 port_offset, port_count;
+	int i;
+
+	for (i = 0; i < xhci->num_ext_caps; i++) {
+		if (xhci->ext_caps[i] & capability) {
+			/* port offsets starts at 1 */
+			port_offset = XHCI_EXT_PORT_OFF(xhci->ext_caps[i]) - 1;
+			port_count = XHCI_EXT_PORT_COUNT(xhci->ext_caps[i]);
+			if (port >= port_offset &&
+			    port < port_offset + port_count)
+				return 1;
+		}
+	}
+	return 0;
+}
+
 int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	int		ret;
+	int		portnum = udev->portnum - 1;
 
 	ret = xhci_usb2_software_lpm_test(hcd, udev);
 	if (!ret) {
 		xhci_dbg(xhci, "software LPM test succeed\n");
-		if (xhci->hw_lpm_support == 1) {
+		if (xhci->hw_lpm_support == 1 &&
+		    xhci_check_usb2_port_capability(xhci, portnum, XHCI_HLC)) {
 			udev->usb2_hw_lpm_capable = 1;
+			udev->l1_params.timeout = XHCI_L1_TIMEOUT;
+			udev->l1_params.besl = XHCI_DEFAULT_BESL;
+			if (xhci_check_usb2_port_capability(xhci, portnum,
+							    XHCI_BLC))
+				udev->usb2_hw_lpm_besl_capable = 1;
 			ret = xhci_set_usb2_hardware_lpm(hcd, udev, 1);
 			if (!ret)
 				udev->usb2_hw_lpm_enabled = 1;
@@ -4363,56 +4526,6 @@ static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd,
 	return timeout;
 }
 
-/*
- * Issue an Evaluate Context command to change the Maximum Exit Latency in the
- * slot context.  If that succeeds, store the new MEL in the xhci_virt_device.
- */
-static int xhci_change_max_exit_latency(struct xhci_hcd *xhci,
-			struct usb_device *udev, u16 max_exit_latency)
-{
-	struct xhci_virt_device *virt_dev;
-	struct xhci_command *command;
-	struct xhci_input_control_ctx *ctrl_ctx;
-	struct xhci_slot_ctx *slot_ctx;
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&xhci->lock, flags);
-	if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) {
-		spin_unlock_irqrestore(&xhci->lock, flags);
-		return 0;
-	}
-
-	/* Attempt to issue an Evaluate Context command to change the MEL. */
-	virt_dev = xhci->devs[udev->slot_id];
-	command = xhci->lpm_command;
-	xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx);
-	spin_unlock_irqrestore(&xhci->lock, flags);
-
-	ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
-	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
-	slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx);
-	slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT));
-	slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency);
-
-	xhci_dbg(xhci, "Set up evaluate context for LPM MEL change.\n");
-	xhci_dbg(xhci, "Slot %u Input Context:\n", udev->slot_id);
-	xhci_dbg_ctx(xhci, command->in_ctx, 0);
-
-	/* Issue and wait for the evaluate context command. */
-	ret = xhci_configure_endpoint(xhci, udev, command,
-			true, true);
-	xhci_dbg(xhci, "Slot %u Output Context:\n", udev->slot_id);
-	xhci_dbg_ctx(xhci, virt_dev->out_ctx, 0);
-
-	if (!ret) {
-		spin_lock_irqsave(&xhci->lock, flags);
-		virt_dev->current_mel = max_exit_latency;
-		spin_unlock_irqrestore(&xhci->lock, flags);
-	}
-	return ret;
-}
-
 static int calculate_max_exit_latency(struct usb_device *udev,
 		enum usb3_link_state state_changed,
 		u16 hub_encoded_timeout)