diff options
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/ohci-q.c | 7 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-tmio.c | 2 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-hub.c | 22 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-mem.c | 5 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 57 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 5 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.c | 3 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.h | 1 |
8 files changed, 83 insertions, 19 deletions
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index f7d561ed3c23..d029bbe9eb36 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -981,10 +981,6 @@ rescan_all: int completed, modified; __hc32 *prev; - /* Is this ED already invisible to the hardware? */ - if (ed->state == ED_IDLE) - goto ed_idle; - /* only take off EDs that the HC isn't using, accounting for * frame counter wraps and EDs with partially retired TDs */ @@ -1012,12 +1008,10 @@ skip_ed: } /* ED's now officially unlinked, hc doesn't see */ - ed->state = ED_IDLE; ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H); ed->hwNextED = 0; wmb(); ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE); -ed_idle: /* reentrancy: if we drop the schedule lock, someone might * have modified this list. normally it's just prepending @@ -1088,6 +1082,7 @@ rescan_this: if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; + ed->state = ED_IDLE; list_del(&ed->in_use_list); } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index e9a6eec39142..cfcfadfc94fc 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -58,7 +58,7 @@ #define CCR_PM_CKRNEN 0x0002 #define CCR_PM_USBPW1 0x0004 #define CCR_PM_USBPW2 0x0008 -#define CCR_PM_USBPW3 0x0008 +#define CCR_PM_USBPW3 0x0010 #define CCR_PM_PMEE 0x0100 #define CCR_PM_PMES 0x8000 diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index e75c565feb53..78241b5550df 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -484,10 +484,13 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, u32 pls = status_reg & PORT_PLS_MASK; /* resume state is a xHCI internal state. - * Do not report it to usb core. + * Do not report it to usb core, instead, pretend to be U3, + * thus usb core knows it's not ready for transfer */ - if (pls == XDEV_RESUME) + if (pls == XDEV_RESUME) { + *status |= USB_SS_PORT_LS_U3; return; + } /* When the CAS bit is set then warm reset * should be performed on port @@ -588,7 +591,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_C_RESET << 16; /* USB3.0 only */ if (hcd->speed == HCD_USB3) { - if ((raw_port_status & PORT_PLC)) + /* Port link change with port in resume state should not be + * reported to usbcore, as this is an internal state to be + * handled by xhci driver. Reporting PLC to usbcore may + * cause usbcore clearing PLC first and port change event + * irq won't be generated. + */ + if ((raw_port_status & PORT_PLC) && + (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) status |= USB_PORT_STAT_C_LINK_STATE << 16; if ((raw_port_status & PORT_WRC)) status |= USB_PORT_STAT_C_BH_RESET << 16; @@ -1120,10 +1130,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd) spin_lock_irqsave(&xhci->lock, flags); if (hcd->self.root_hub->do_remote_wakeup) { - if (bus_state->resuming_ports) { + if (bus_state->resuming_ports || /* USB2 */ + bus_state->port_remote_wakeup) { /* USB3 */ spin_unlock_irqrestore(&xhci->lock, flags); - xhci_dbg(xhci, "suspend failed because " - "a port is resuming\n"); + xhci_dbg(xhci, "suspend failed because a port is resuming\n"); return -EBUSY; } } diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index f8336408ef07..9a8c936cd42c 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1427,10 +1427,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Attempt to use the ring cache */ if (virt_dev->num_rings_cached == 0) return -ENOMEM; + virt_dev->num_rings_cached--; virt_dev->eps[ep_index].new_ring = virt_dev->ring_cache[virt_dev->num_rings_cached]; virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL; - virt_dev->num_rings_cached--; xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring, 1, type); } @@ -1792,7 +1792,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) int size; int i, j, num_ports; - del_timer_sync(&xhci->cmd_timer); + if (timer_pending(&xhci->cmd_timer)) + del_timer_sync(&xhci->cmd_timer); /* Free the Event Ring Segment Table and the actual Event Ring */ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 4a4cb1d91ac8..5590eac2b22d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -23,10 +23,15 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/module.h> +#include <linux/acpi.h> #include "xhci.h" #include "xhci-trace.h" +#define PORT2_SSIC_CONFIG_REG2 0x883c +#define PROG_DONE (1 << 30) +#define SSIC_PORT_UNUSED (1 << 31) + /* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 @@ -176,20 +181,63 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) } /* + * In some Intel xHCI controllers, in order to get D3 working, + * through a vendor specific SSIC CONFIG register at offset 0x883c, + * SSIC PORT need to be marked as "unused" before putting xHCI + * into D3. After D3 exit, the SSIC port need to be marked as "used". + * Without this change, xHCI might not enter D3 state. * Make sure PME works on some Intel xHCI controllers by writing 1 to clear * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 */ -static void xhci_pme_quirk(struct xhci_hcd *xhci) +static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend) { + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); u32 val; void __iomem *reg; + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { + + reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2; + + /* Notify SSIC that SSIC profile programming is not done */ + val = readl(reg) & ~PROG_DONE; + writel(val, reg); + + /* Mark SSIC port as unused(suspend) or used(resume) */ + val = readl(reg); + if (suspend) + val |= SSIC_PORT_UNUSED; + else + val &= ~SSIC_PORT_UNUSED; + writel(val, reg); + + /* Notify SSIC that SSIC profile programming is done */ + val = readl(reg) | PROG_DONE; + writel(val, reg); + readl(reg); + } + reg = (void __iomem *) xhci->cap_regs + 0x80a4; val = readl(reg); writel(val | BIT(28), reg); readl(reg); } +#ifdef CONFIG_ACPI +static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) +{ + static const u8 intel_dsm_uuid[] = { + 0xb7, 0x0c, 0x34, 0xac, 0x01, 0xe9, 0xbf, 0x45, + 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23, + }; + acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, NULL); +} +#else + static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } +#endif /* CONFIG_ACPI */ + /* called during probe() after chip reset completes */ static int xhci_pci_setup(struct usb_hcd *hcd) { @@ -263,6 +311,9 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) HCC_MAX_PSA(xhci->hcc_params) >= 4) xhci->shared_hcd->can_do_streams = 1; + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) + xhci_pme_acpi_rtd3_enable(dev); + /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ pm_runtime_put_noidle(&dev->dev); @@ -307,7 +358,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) pdev->no_d3cold = true; if (xhci->quirks & XHCI_PME_STUCK_QUIRK) - xhci_pme_quirk(xhci); + xhci_pme_quirk(hcd, true); return xhci_suspend(xhci, do_wakeup); } @@ -340,7 +391,7 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) usb_enable_intel_xhci_ports(pdev); if (xhci->quirks & XHCI_PME_STUCK_QUIRK) - xhci_pme_quirk(xhci); + xhci_pme_quirk(hcd, false); retval = xhci_resume(xhci, hibernated); return retval; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 94416ff70810..32f4d564494a 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -82,7 +82,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, return 0; /* offset in TRBs */ segment_offset = trb - seg->trbs; - if (segment_offset > TRBS_PER_SEGMENT) + if (segment_offset >= TRBS_PER_SEGMENT) return 0; return seg->dma + (segment_offset * sizeof(*trb)); } @@ -1546,6 +1546,9 @@ static void handle_port_status(struct xhci_hcd *xhci, usb_hcd_resume_root_hub(hcd); } + if (hcd->speed == HCD_USB3 && (temp & PORT_PLS_MASK) == XDEV_INACTIVE) + bus_state->port_remote_wakeup &= ~(1 << faked_port_index); + if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) { xhci_dbg(xhci, "port resume event for port %d\n", port_id); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7da0d6043d33..526ebc0c7e72 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3453,6 +3453,9 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) return -EINVAL; } + if (virt_dev->tt_info) + old_active_eps = virt_dev->tt_info->active_eps; + if (virt_dev->udev != udev) { /* If the virt_dev and the udev does not match, this virt_dev * may belong to another udev. diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 31e46cc55807..ed2ebf647c38 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -285,6 +285,7 @@ struct xhci_op_regs { #define XDEV_U0 (0x0 << 5) #define XDEV_U2 (0x2 << 5) #define XDEV_U3 (0x3 << 5) +#define XDEV_INACTIVE (0x6 << 5) #define XDEV_RESUME (0xf << 5) /* true: port has power (see HCC_PPC) */ #define PORT_POWER (1 << 9) |