diff options
Diffstat (limited to 'drivers/usb/misc/usb3503.c')
| -rw-r--r-- | drivers/usb/misc/usb3503.c | 94 |
1 files changed, 35 insertions, 59 deletions
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index 72f39a9751b5..116bd789e568 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -7,11 +7,10 @@ #include <linux/clk.h> #include <linux/i2c.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/delay.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/platform_data/usb3503.h> #include <linux/regmap.h> @@ -47,19 +46,19 @@ struct usb3503 { struct device *dev; struct clk *clk; u8 port_off_mask; - int gpio_intn; - int gpio_reset; - int gpio_connect; + struct gpio_desc *intn; + struct gpio_desc *reset; + struct gpio_desc *connect; bool secondary_ref_clk; }; static int usb3503_reset(struct usb3503 *hub, int state) { - if (!state && gpio_is_valid(hub->gpio_connect)) - gpio_set_value_cansleep(hub->gpio_connect, 0); + if (!state && hub->connect) + gpiod_set_value_cansleep(hub->connect, 0); - if (gpio_is_valid(hub->gpio_reset)) - gpio_set_value_cansleep(hub->gpio_reset, state); + if (hub->reset) + gpiod_set_value_cansleep(hub->reset, !state); /* Wait T_HUBINIT == 4ms for hub logic to stabilize */ if (state) @@ -115,8 +114,8 @@ static int usb3503_connect(struct usb3503 *hub) } } - if (gpio_is_valid(hub->gpio_connect)) - gpio_set_value_cansleep(hub->gpio_connect, 1); + if (hub->connect) + gpiod_set_value_cansleep(hub->connect, 1); hub->mode = USB3503_MODE_HUB; dev_info(dev, "switched to HUB mode\n"); @@ -163,13 +162,11 @@ static int usb3503_probe(struct usb3503 *hub) int err; u32 mode = USB3503_MODE_HUB; const u32 *property; + enum gpiod_flags flags; int len; if (pdata) { hub->port_off_mask = pdata->port_off_mask; - hub->gpio_intn = pdata->gpio_intn; - hub->gpio_connect = pdata->gpio_connect; - hub->gpio_reset = pdata->gpio_reset; hub->mode = pdata->initial_mode; } else if (np) { u32 rate = 0; @@ -230,59 +227,38 @@ static int usb3503_probe(struct usb3503 *hub) } } - hub->gpio_intn = of_get_named_gpio(np, "intn-gpios", 0); - if (hub->gpio_intn == -EPROBE_DEFER) - return -EPROBE_DEFER; - hub->gpio_connect = of_get_named_gpio(np, "connect-gpios", 0); - if (hub->gpio_connect == -EPROBE_DEFER) - return -EPROBE_DEFER; - hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0); - if (hub->gpio_reset == -EPROBE_DEFER) - return -EPROBE_DEFER; of_property_read_u32(np, "initial-mode", &mode); hub->mode = mode; } - if (hub->port_off_mask && !hub->regmap) - dev_err(dev, "Ports disabled with no control interface\n"); - - if (gpio_is_valid(hub->gpio_intn)) { - int val = hub->secondary_ref_clk ? GPIOF_OUT_INIT_LOW : - GPIOF_OUT_INIT_HIGH; - err = devm_gpio_request_one(dev, hub->gpio_intn, val, - "usb3503 intn"); - if (err) { - dev_err(dev, - "unable to request GPIO %d as interrupt pin (%d)\n", - hub->gpio_intn, err); - return err; - } - } - - if (gpio_is_valid(hub->gpio_connect)) { - err = devm_gpio_request_one(dev, hub->gpio_connect, - GPIOF_OUT_INIT_LOW, "usb3503 connect"); - if (err) { - dev_err(dev, - "unable to request GPIO %d as connect pin (%d)\n", - hub->gpio_connect, err); - return err; - } - } - - if (gpio_is_valid(hub->gpio_reset)) { - err = devm_gpio_request_one(dev, hub->gpio_reset, - GPIOF_OUT_INIT_LOW, "usb3503 reset"); + if (hub->secondary_ref_clk) + flags = GPIOD_OUT_LOW; + else + flags = GPIOD_OUT_HIGH; + hub->intn = devm_gpiod_get_optional(dev, "intn", flags); + if (IS_ERR(hub->intn)) + return PTR_ERR(hub->intn); + if (hub->intn) + gpiod_set_consumer_name(hub->intn, "usb3503 intn"); + + hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW); + if (IS_ERR(hub->connect)) + return PTR_ERR(hub->connect); + if (hub->connect) + gpiod_set_consumer_name(hub->connect, "usb3503 connect"); + + hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(hub->reset)) + return PTR_ERR(hub->reset); + if (hub->reset) { /* Datasheet defines a hardware reset to be at least 100us */ usleep_range(100, 10000); - if (err) { - dev_err(dev, - "unable to request GPIO %d as reset pin (%d)\n", - hub->gpio_reset, err); - return err; - } + gpiod_set_consumer_name(hub->reset, "usb3503 reset"); } + if (hub->port_off_mask && !hub->regmap) + dev_err(dev, "Ports disabled with no control interface\n"); + usb3503_switch_mode(hub, hub->mode); dev_info(dev, "%s: probed in %s mode\n", __func__, |