summaryrefslogtreecommitdiffstats
path: root/drivers/usb/net/usbnet.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/usb/net/usbnet.c350
1 files changed, 1 insertions, 349 deletions
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 590bf31ae1f4..d52480aced80 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -156,9 +156,6 @@
// us (it polls at HZ/4 usually) before we report too many false errors.
#define THROTTLE_JIFFIES (HZ/8)
-// for vendor-specific control operations
-#define CONTROL_TIMEOUT_MS USB_CTRL_GET_TIMEOUT
-
// between wakeups
#define UNLINK_TIMEOUT_MS 3
@@ -690,341 +687,6 @@ static const struct driver_info cdc_info = {
-#ifdef CONFIG_USB_GENESYS
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * GeneSys GL620USB-A (www.genesyslogic.com.tw)
- *
- * ... should partially interop with the Win32 driver for this hardware
- * The GeneSys docs imply there's some NDIS issue motivating this framing.
- *
- * Some info from GeneSys:
- * - GL620USB-A is full duplex; GL620USB is only half duplex for bulk.
- * (Some cables, like the BAFO-100c, use the half duplex version.)
- * - For the full duplex model, the low bit of the version code says
- * which side is which ("left/right").
- * - For the half duplex type, a control/interrupt handshake settles
- * the transfer direction. (That's disabled here, partially coded.)
- * A control URB would block until other side writes an interrupt.
- *
- * Original code from Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
- * and merged into "usbnet" by Stanislav Brabec <utx@penguin.cz>.
- *
- *-------------------------------------------------------------------------*/
-
-// control msg write command
-#define GENELINK_CONNECT_WRITE 0xF0
-// interrupt pipe index
-#define GENELINK_INTERRUPT_PIPE 0x03
-// interrupt read buffer size
-#define INTERRUPT_BUFSIZE 0x08
-// interrupt pipe interval value
-#define GENELINK_INTERRUPT_INTERVAL 0x10
-// max transmit packet number per transmit
-#define GL_MAX_TRANSMIT_PACKETS 32
-// max packet length
-#define GL_MAX_PACKET_LEN 1514
-// max receive buffer size
-#define GL_RCV_BUF_SIZE \
- (((GL_MAX_PACKET_LEN + 4) * GL_MAX_TRANSMIT_PACKETS) + 4)
-
-struct gl_packet {
- u32 packet_length;
- char packet_data [1];
-};
-
-struct gl_header {
- u32 packet_count;
- struct gl_packet packets;
-};
-
-#ifdef GENELINK_ACK
-
-// FIXME: this code is incomplete, not debugged; it doesn't
-// handle interrupts correctly. interrupts should be generic
-// code like all other device I/O, anyway.
-
-struct gl_priv {
- struct urb *irq_urb;
- char irq_buf [INTERRUPT_BUFSIZE];
-};
-
-static inline int gl_control_write (struct usbnet *dev, u8 request, u16 value)
-{
- int retval;
-
- retval = usb_control_msg (dev->udev,
- usb_sndctrlpipe (dev->udev, 0),
- request,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- value,
- 0, // index
- 0, // data buffer
- 0, // size
- CONTROL_TIMEOUT_MS);
- return retval;
-}
-
-static void gl_interrupt_complete (struct urb *urb, struct pt_regs *regs)
-{
- int status = urb->status;
-
- switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, urb->status);
- }
-
- status = usb_submit_urb (urb, GFP_ATOMIC);
- if (status)
- err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, status);
-}
-
-static int gl_interrupt_read (struct usbnet *dev)
-{
- struct gl_priv *priv = dev->priv_data;
- int retval;
-
- // issue usb interrupt read
- if (priv && priv->irq_urb) {
- // submit urb
- if ((retval = usb_submit_urb (priv->irq_urb, GFP_KERNEL)) != 0)
- dbg ("gl_interrupt_read: submit fail - %X...", retval);
- else
- dbg ("gl_interrupt_read: submit success...");
- }
-
- return 0;
-}
-
-// check whether another side is connected
-static int genelink_check_connect (struct usbnet *dev)
-{
- int retval;
-
- dbg ("genelink_check_connect...");
-
- // detect whether another side is connected
- if ((retval = gl_control_write (dev, GENELINK_CONNECT_WRITE, 0)) != 0) {
- dbg ("%s: genelink_check_connect write fail - %X",
- dev->net->name, retval);
- return retval;
- }
-
- // usb interrupt read to ack another side
- if ((retval = gl_interrupt_read (dev)) != 0) {
- dbg ("%s: genelink_check_connect read fail - %X",
- dev->net->name, retval);
- return retval;
- }
-
- dbg ("%s: genelink_check_connect read success", dev->net->name);
- return 0;
-}
-
-// allocate and initialize the private data for genelink
-static int genelink_init (struct usbnet *dev)
-{
- struct gl_priv *priv;
-
- // allocate the private data structure
- if ((priv = kmalloc (sizeof *priv, GFP_KERNEL)) == 0) {
- dbg ("%s: cannot allocate private data per device",
- dev->net->name);
- return -ENOMEM;
- }
-
- // allocate irq urb
- if ((priv->irq_urb = usb_alloc_urb (0, GFP_KERNEL)) == 0) {
- dbg ("%s: cannot allocate private irq urb per device",
- dev->net->name);
- kfree (priv);
- return -ENOMEM;
- }
-
- // fill irq urb
- usb_fill_int_urb (priv->irq_urb, dev->udev,
- usb_rcvintpipe (dev->udev, GENELINK_INTERRUPT_PIPE),
- priv->irq_buf, INTERRUPT_BUFSIZE,
- gl_interrupt_complete, 0,
- GENELINK_INTERRUPT_INTERVAL);
-
- // set private data pointer
- dev->priv_data = priv;
-
- return 0;
-}
-
-// release the private data
-static int genelink_free (struct usbnet *dev)
-{
- struct gl_priv *priv = dev->priv_data;
-
- if (!priv)
- return 0;
-
-// FIXME: can't cancel here; it's synchronous, and
-// should have happened earlier in any case (interrupt
-// handling needs to be generic)
-
- // cancel irq urb first
- usb_kill_urb (priv->irq_urb);
-
- // free irq urb
- usb_free_urb (priv->irq_urb);
-
- // free the private data structure
- kfree (priv);
-
- return 0;
-}
-
-#endif
-
-static int genelink_rx_fixup (struct usbnet *dev, struct sk_buff *skb)
-{
- struct gl_header *header;
- struct gl_packet *packet;
- struct sk_buff *gl_skb;
- u32 size;
-
- header = (struct gl_header *) skb->data;
-
- // get the packet count of the received skb
- le32_to_cpus (&header->packet_count);
- if ((header->packet_count > GL_MAX_TRANSMIT_PACKETS)
- || (header->packet_count < 0)) {
- dbg ("genelink: invalid received packet count %d",
- header->packet_count);
- return 0;
- }
-
- // set the current packet pointer to the first packet
- packet = &header->packets;
-
- // decrement the length for the packet count size 4 bytes
- skb_pull (skb, 4);
-
- while (header->packet_count > 1) {
- // get the packet length
- size = packet->packet_length;
-
- // this may be a broken packet
- if (size > GL_MAX_PACKET_LEN) {
- dbg ("genelink: invalid rx length %d", size);
- return 0;
- }
-
- // allocate the skb for the individual packet
- gl_skb = alloc_skb (size, GFP_ATOMIC);
- if (gl_skb) {
-
- // copy the packet data to the new skb
- memcpy(skb_put(gl_skb, size), packet->packet_data, size);
- usbnet_skb_return (dev, gl_skb);
- }
-
- // advance to the next packet
- packet = (struct gl_packet *)
- &packet->packet_data [size];
- header->packet_count--;
-
- // shift the data pointer to the next gl_packet
- skb_pull (skb, size + 4);
- }
-
- // skip the packet length field 4 bytes
- skb_pull (skb, 4);
-
- if (skb->len > GL_MAX_PACKET_LEN) {
- dbg ("genelink: invalid rx length %d", skb->len);
- return 0;
- }
- return 1;
-}
-
-static struct sk_buff *
-genelink_tx_fixup (struct usbnet *dev, struct sk_buff *skb, unsigned flags)
-{
- int padlen;
- int length = skb->len;
- int headroom = skb_headroom (skb);
- int tailroom = skb_tailroom (skb);
- u32 *packet_count;
- u32 *packet_len;
-
- // FIXME: magic numbers, bleech
- padlen = ((skb->len + (4 + 4*1)) % 64) ? 0 : 1;
-
- if ((!skb_cloned (skb))
- && ((headroom + tailroom) >= (padlen + (4 + 4*1)))) {
- if ((headroom < (4 + 4*1)) || (tailroom < padlen)) {
- skb->data = memmove (skb->head + (4 + 4*1),
- skb->data, skb->len);
- skb->tail = skb->data + skb->len;
- }
- } else {
- struct sk_buff *skb2;
- skb2 = skb_copy_expand (skb, (4 + 4*1) , padlen, flags);
- dev_kfree_skb_any (skb);
- skb = skb2;
- if (!skb)
- return NULL;
- }
-
- // attach the packet count to the header
- packet_count = (u32 *) skb_push (skb, (4 + 4*1));
- packet_len = packet_count + 1;
-
- // FIXME little endian?
- *packet_count = 1;
- *packet_len = length;
-
- // add padding byte
- if ((skb->len % dev->maxpacket) == 0)
- skb_put (skb, 1);
-
- return skb;
-}
-
-static int genelink_bind (struct usbnet *dev, struct usb_interface *intf)
-{
- dev->hard_mtu = GL_RCV_BUF_SIZE;
- dev->net->hard_header_len += 4;
- return 0;
-}
-
-static const struct driver_info genelink_info = {
- .description = "Genesys GeneLink",
- .flags = FLAG_FRAMING_GL | FLAG_NO_SETINT,
- .bind = genelink_bind,
- .rx_fixup = genelink_rx_fixup,
- .tx_fixup = genelink_tx_fixup,
-
- .in = 1, .out = 2,
-
-#ifdef GENELINK_ACK
- .check_connect =genelink_check_connect,
-#endif
-};
-
-#endif /* CONFIG_USB_GENESYS */
-
-
-
#ifdef CONFIG_USB_PL2301
#define HAVE_HARDWARE
@@ -1059,7 +721,7 @@ pl_vendor_req (struct usbnet *dev, u8 req, u8 val, u8 index)
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
val, index,
NULL, 0,
- CONTROL_TIMEOUT_MS);
+ USB_CTRL_GET_TIMEOUT);
}
static inline int
@@ -2323,16 +1985,6 @@ EXPORT_SYMBOL_GPL(usbnet_resume);
static const struct usb_device_id products [] = {
-#ifdef CONFIG_USB_GENESYS
-{
- USB_DEVICE (0x05e3, 0x0502), // GL620USB-A
- .driver_info = (unsigned long) &genelink_info,
-},
- /* NOT: USB_DEVICE (0x05e3, 0x0501), // GL620USB
- * that's half duplex, not currently supported
- */
-#endif
-
#ifdef CONFIG_USB_PL2301
{
USB_DEVICE (0x067b, 0x0000), // PL-2301