diff options
Diffstat (limited to 'drivers/usb/phy/phy-tegra-usb.c')
| -rw-r--r-- | drivers/usb/phy/phy-tegra-usb.c | 103 |
1 files changed, 92 insertions, 11 deletions
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index 03a333797382..a48452a6172b 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -45,6 +45,7 @@ #define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) #define USB_SUSP_CTRL 0x400 +#define USB_WAKE_ON_RESUME_EN BIT(2) #define USB_WAKE_ON_CNNT_EN_DEV BIT(3) #define USB_WAKE_ON_DISCON_EN_DEV BIT(4) #define USB_SUSP_CLR BIT(5) @@ -56,6 +57,15 @@ #define USB_SUSP_SET BIT(14) #define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) +#define USB_PHY_VBUS_SENSORS 0x404 +#define B_SESS_VLD_WAKEUP_EN BIT(6) +#define B_VBUS_VLD_WAKEUP_EN BIT(14) +#define A_SESS_VLD_WAKEUP_EN BIT(22) +#define A_VBUS_VLD_WAKEUP_EN BIT(30) + +#define USB_PHY_VBUS_WAKEUP_ID 0x408 +#define VBUS_WAKEUP_WAKEUP_EN BIT(30) + #define USB1_LEGACY_CTRL 0x410 #define USB1_NO_LEGACY_MODE BIT(0) #define USB1_VBUS_SENSE_CTL_MASK (3 << 1) @@ -334,6 +344,11 @@ static int utmip_pad_power_on(struct tegra_usb_phy *phy) writel_relaxed(val, base + UTMIP_BIAS_CFG0); } + if (phy->pad_wakeup) { + phy->pad_wakeup = false; + utmip_pad_count--; + } + spin_unlock(&utmip_pad_lock); clk_disable_unprepare(phy->pad_clk); @@ -359,6 +374,17 @@ static int utmip_pad_power_off(struct tegra_usb_phy *phy) goto ulock; } + /* + * In accordance to TRM, OTG and Bias pad circuits could be turned off + * to save power if wake is enabled, but the VBUS-change detection + * method is board-specific and these circuits may need to be enabled + * to generate wakeup event, hence we will just keep them both enabled. + */ + if (phy->wakeup_enabled) { + phy->pad_wakeup = true; + utmip_pad_count++; + } + if (--utmip_pad_count == 0) { val = readl_relaxed(base + UTMIP_BIAS_CFG0); val |= UTMIP_OTGPD | UTMIP_BIASPD; @@ -503,11 +529,24 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy) writel_relaxed(val, base + UTMIP_PLL_CFG1); } + val = readl_relaxed(base + USB_SUSP_CTRL); + val &= ~USB_WAKE_ON_RESUME_EN; + writel_relaxed(val, base + USB_SUSP_CTRL); + if (phy->mode == USB_DR_MODE_PERIPHERAL) { val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV); writel_relaxed(val, base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID); + val &= ~VBUS_WAKEUP_WAKEUP_EN; + writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID); + + val = readl_relaxed(base + USB_PHY_VBUS_SENSORS); + val &= ~(A_VBUS_VLD_WAKEUP_EN | A_SESS_VLD_WAKEUP_EN); + val &= ~(B_VBUS_VLD_WAKEUP_EN | B_SESS_VLD_WAKEUP_EN); + writel_relaxed(val, base + USB_PHY_VBUS_SENSORS); + val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0); val &= ~UTMIP_PD_CHRG; writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0); @@ -605,31 +644,51 @@ static int utmi_phy_power_off(struct tegra_usb_phy *phy) utmi_phy_clk_disable(phy); - if (phy->mode == USB_DR_MODE_PERIPHERAL) { + /* PHY won't resume if reset is asserted */ + if (!phy->wakeup_enabled) { val = readl_relaxed(base + USB_SUSP_CTRL); - val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); - val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5); + val |= UTMIP_RESET; writel_relaxed(val, base + USB_SUSP_CTRL); } - val = readl_relaxed(base + USB_SUSP_CTRL); - val |= UTMIP_RESET; - writel_relaxed(val, base + USB_SUSP_CTRL); - val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0); val |= UTMIP_PD_CHRG; writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0); - val = readl_relaxed(base + UTMIP_XCVR_CFG0); - val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | - UTMIP_FORCE_PDZI_POWERDOWN; - writel_relaxed(val, base + UTMIP_XCVR_CFG0); + if (!phy->wakeup_enabled) { + val = readl_relaxed(base + UTMIP_XCVR_CFG0); + val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | + UTMIP_FORCE_PDZI_POWERDOWN; + writel_relaxed(val, base + UTMIP_XCVR_CFG0); + } val = readl_relaxed(base + UTMIP_XCVR_CFG1); val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN; writel_relaxed(val, base + UTMIP_XCVR_CFG1); + if (phy->wakeup_enabled) { + val = readl_relaxed(base + USB_SUSP_CTRL); + val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); + val |= USB_WAKEUP_DEBOUNCE_COUNT(5); + val |= USB_WAKE_ON_RESUME_EN; + writel_relaxed(val, base + USB_SUSP_CTRL); + + /* + * Ask VBUS sensor to generate wake event once cable is + * connected. + */ + if (phy->mode == USB_DR_MODE_PERIPHERAL) { + val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID); + val |= VBUS_WAKEUP_WAKEUP_EN; + writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID); + + val = readl_relaxed(base + USB_PHY_VBUS_SENSORS); + val |= A_VBUS_VLD_WAKEUP_EN; + writel_relaxed(val, base + USB_PHY_VBUS_SENSORS); + } + } + return utmip_pad_power_off(phy); } @@ -765,6 +824,15 @@ static int ulpi_phy_power_off(struct tegra_usb_phy *phy) usleep_range(5000, 6000); clk_disable_unprepare(phy->clk); + /* + * Wakeup currently unimplemented for ULPI, thus PHY needs to be + * force-resumed. + */ + if (WARN_ON_ONCE(phy->wakeup_enabled)) { + ulpi_phy_power_on(phy); + return -EOPNOTSUPP; + } + return 0; } @@ -784,6 +852,9 @@ static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) phy->powered_on = true; + /* Let PHY settle down */ + usleep_range(2000, 2500); + return 0; } @@ -824,6 +895,15 @@ static void tegra_usb_phy_shutdown(struct usb_phy *u_phy) phy->freq = NULL; } +static int tegra_usb_phy_set_wakeup(struct usb_phy *u_phy, bool enable) +{ + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); + + phy->wakeup_enabled = enable; + + return 0; +} + static int tegra_usb_phy_set_suspend(struct usb_phy *u_phy, int suspend) { struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); @@ -1195,6 +1275,7 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) tegra_phy->u_phy.dev = &pdev->dev; tegra_phy->u_phy.init = tegra_usb_phy_init; tegra_phy->u_phy.shutdown = tegra_usb_phy_shutdown; + tegra_phy->u_phy.set_wakeup = tegra_usb_phy_set_wakeup; tegra_phy->u_phy.set_suspend = tegra_usb_phy_set_suspend; platform_set_drvdata(pdev, tegra_phy); |