diff options
Diffstat (limited to 'drivers/usb/serial/metro-usb.c')
| -rw-r--r-- | drivers/usb/serial/metro-usb.c | 402 |
1 files changed, 402 insertions, 0 deletions
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c new file mode 100644 index 000000000000..6e1622f2a297 --- /dev/null +++ b/drivers/usb/serial/metro-usb.c @@ -0,0 +1,402 @@ +/* + Some of this code is credited to Linux USB open source files that are + distributed with Linux. + + Copyright: 2007 Metrologic Instruments. All rights reserved. + Copyright: 2011 Azimut Ltd. <http://azimutrzn.ru/> +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/uaccess.h> +#include <linux/usb/serial.h> + +/* Version Information */ +#define DRIVER_VERSION "v1.2.0.0" +#define DRIVER_DESC "Metrologic Instruments Inc. - USB-POS driver" + +/* Product information. */ +#define FOCUS_VENDOR_ID 0x0C2E +#define FOCUS_PRODUCT_ID 0x0720 +#define FOCUS_PRODUCT_ID_UNI 0x0710 + +#define METROUSB_SET_REQUEST_TYPE 0x40 +#define METROUSB_SET_MODEM_CTRL_REQUEST 10 +#define METROUSB_SET_BREAK_REQUEST 0x40 +#define METROUSB_MCR_NONE 0x08 /* Deactivate DTR and RTS. */ +#define METROUSB_MCR_RTS 0x0a /* Activate RTS. */ +#define METROUSB_MCR_DTR 0x09 /* Activate DTR. */ +#define WDR_TIMEOUT 5000 /* default urb timeout. */ + +/* Private data structure. */ +struct metrousb_private { + spinlock_t lock; + int throttled; + unsigned long control_state; +}; + +/* Device table list. */ +static struct usb_device_id id_table[] = { + { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) }, + { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) }, + { }, /* Terminating entry. */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* Input parameter constants. */ +static bool debug; + +static void metrousb_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + struct tty_struct *tty; + unsigned char *data = urb->transfer_buffer; + int throttled = 0; + int result = 0; + unsigned long flags = 0; + + dev_dbg(&port->dev, "%s\n", __func__); + + switch (urb->status) { + case 0: + /* Success status, read from the port. */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* urb has been terminated. */ + dev_dbg(&port->dev, + "%s - urb shutting down, error code=%d\n", + __func__, result); + return; + default: + dev_dbg(&port->dev, + "%s - non-zero urb received, error code=%d\n", + __func__, result); + goto exit; + } + + + /* Set the data read from the usb port into the serial port buffer. */ + tty = tty_port_tty_get(&port->port); + if (!tty) { + dev_dbg(&port->dev, "%s - bad tty pointer - exiting\n", + __func__); + return; + } + + if (tty && urb->actual_length) { + /* Loop through the data copying each byte to the tty layer. */ + tty_insert_flip_string(tty, data, urb->actual_length); + + /* Force the data to the tty layer. */ + tty_flip_buffer_push(tty); + } + tty_kref_put(tty); + + /* Set any port variables. */ + spin_lock_irqsave(&metro_priv->lock, flags); + throttled = metro_priv->throttled; + spin_unlock_irqrestore(&metro_priv->lock, flags); + + /* Continue trying to read if set. */ + if (!throttled) { + usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev, + usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress), + port->interrupt_in_urb->transfer_buffer, + port->interrupt_in_urb->transfer_buffer_length, + metrousb_read_int_callback, port, 1); + + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + + if (result) + dev_dbg(&port->dev, + "%s - failed submitting interrupt in urb, error code=%d\n", + __func__, result); + } + return; + +exit: + /* Try to resubmit the urb. */ + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_dbg(&port->dev, + "%s - failed submitting interrupt in urb, error code=%d\n", + __func__, result); +} + +static void metrousb_cleanup(struct usb_serial_port *port) +{ + dev_dbg(&port->dev, "%s\n", __func__); + + if (port->serial->dev) { + /* Shutdown any interrupt in urbs. */ + if (port->interrupt_in_urb) { + usb_unlink_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); + } + } +} + +static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + int result = 0; + + dev_dbg(&port->dev, "%s\n", __func__); + + /* Make sure the urb is initialized. */ + if (!port->interrupt_in_urb) { + dev_dbg(&port->dev, "%s - interrupt urb not initialized\n", + __func__); + return -ENODEV; + } + + /* Set the private data information for the port. */ + spin_lock_irqsave(&metro_priv->lock, flags); + metro_priv->control_state = 0; + metro_priv->throttled = 0; + spin_unlock_irqrestore(&metro_priv->lock, flags); + + /* + * Force low_latency on so that our tty_push actually forces the data + * through, otherwise it is scheduled, and with high data rates (like + * with OHCI) data can get lost. + */ + if (tty) + tty->low_latency = 1; + + /* Clear the urb pipe. */ + usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe); + + /* Start reading from the device */ + usb_fill_int_urb(port->interrupt_in_urb, serial->dev, + usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress), + port->interrupt_in_urb->transfer_buffer, + port->interrupt_in_urb->transfer_buffer_length, + metrousb_read_int_callback, port, 1); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + + if (result) { + dev_dbg(&port->dev, + "%s - failed submitting interrupt in urb, error code=%d\n", + __func__, result); + goto exit; + } + + dev_dbg(&port->dev, "%s - port open\n", __func__); +exit: + return result; +} + +static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int control_state) +{ + int retval = 0; + unsigned char mcr = METROUSB_MCR_NONE; + + dev_dbg(&serial->dev->dev, "%s - control state = %d\n", + __func__, control_state); + + /* Set the modem control value. */ + if (control_state & TIOCM_DTR) + mcr |= METROUSB_MCR_DTR; + if (control_state & TIOCM_RTS) + mcr |= METROUSB_MCR_RTS; + + /* Send the command to the usb port. */ + retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + METROUSB_SET_REQUEST_TYPE, METROUSB_SET_MODEM_CTRL_REQUEST, + control_state, 0, NULL, 0, WDR_TIMEOUT); + if (retval < 0) + dev_dbg(&serial->dev->dev, + "%s - set modem ctrl=0x%x failed, error code=%d\n", + __func__, mcr, retval); + + return retval; +} + +static void metrousb_shutdown(struct usb_serial *serial) +{ + int i = 0; + + dev_dbg(&serial->dev->dev, "%s\n", __func__); + + /* Stop reading and writing on all ports. */ + for (i = 0; i < serial->num_ports; ++i) { + /* Close any open urbs. */ + metrousb_cleanup(serial->port[i]); + + /* Free memory. */ + kfree(usb_get_serial_port_data(serial->port[i])); + usb_set_serial_port_data(serial->port[i], NULL); + + dev_dbg(&serial->dev->dev, "%s - freed port number=%d\n", + __func__, serial->port[i]->number); + } +} + +static int metrousb_startup(struct usb_serial *serial) +{ + struct metrousb_private *metro_priv; + struct usb_serial_port *port; + int i = 0; + + dev_dbg(&serial->dev->dev, "%s\n", __func__); + + /* Loop through the serial ports setting up the private structures. + * Currently we only use one port. */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + + /* Declare memory. */ + metro_priv = kzalloc(sizeof(struct metrousb_private), GFP_KERNEL); + if (!metro_priv) + return -ENOMEM; + + /* Initialize memory. */ + spin_lock_init(&metro_priv->lock); + usb_set_serial_port_data(port, metro_priv); + + dev_dbg(&serial->dev->dev, "%s - port number=%d\n ", + __func__, port->number); + } + + return 0; +} + +static void metrousb_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + + dev_dbg(tty->dev, "%s\n", __func__); + + /* Set the private information for the port to stop reading data. */ + spin_lock_irqsave(&metro_priv->lock, flags); + metro_priv->throttled = 1; + spin_unlock_irqrestore(&metro_priv->lock, flags); +} + +static int metrousb_tiocmget(struct tty_struct *tty) +{ + unsigned long control_state = 0; + struct usb_serial_port *port = tty->driver_data; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + + dev_dbg(tty->dev, "%s\n", __func__); + + spin_lock_irqsave(&metro_priv->lock, flags); + control_state = metro_priv->control_state; + spin_unlock_irqrestore(&metro_priv->lock, flags); + + return control_state; +} + +static int metrousb_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + unsigned long control_state = 0; + + dev_dbg(tty->dev, "%s - set=%d, clear=%d\n", __func__, set, clear); + + spin_lock_irqsave(&metro_priv->lock, flags); + control_state = metro_priv->control_state; + + /* Set the RTS and DTR values. */ + if (set & TIOCM_RTS) + control_state |= TIOCM_RTS; + if (set & TIOCM_DTR) + control_state |= TIOCM_DTR; + if (clear & TIOCM_RTS) + control_state &= ~TIOCM_RTS; + if (clear & TIOCM_DTR) + control_state &= ~TIOCM_DTR; + + metro_priv->control_state = control_state; + spin_unlock_irqrestore(&metro_priv->lock, flags); + return metrousb_set_modem_ctrl(serial, control_state); +} + +static void metrousb_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + int result = 0; + + dev_dbg(tty->dev, "%s\n", __func__); + + /* Set the private information for the port to resume reading data. */ + spin_lock_irqsave(&metro_priv->lock, flags); + metro_priv->throttled = 0; + spin_unlock_irqrestore(&metro_priv->lock, flags); + + /* Submit the urb to read from the port. */ + port->interrupt_in_urb->dev = port->serial->dev; + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + if (result) + dev_dbg(tty->dev, + "failed submitting interrupt in urb error code=%d\n", + result); +} + +static struct usb_driver metrousb_driver = { + .name = "metro-usb", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table +}; + +static struct usb_serial_driver metrousb_device = { + .driver = { + .owner = THIS_MODULE, + .name = "metro-usb", + }, + .description = "Metrologic USB to serial converter.", + .id_table = id_table, + .num_ports = 1, + .open = metrousb_open, + .close = metrousb_cleanup, + .read_int_callback = metrousb_read_int_callback, + .attach = metrousb_startup, + .release = metrousb_shutdown, + .throttle = metrousb_throttle, + .unthrottle = metrousb_unthrottle, + .tiocmget = metrousb_tiocmget, + .tiocmset = metrousb_tiocmset, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &metrousb_device, + NULL, +}; + +module_usb_serial_driver(metrousb_driver, serial_drivers); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Philip Nicastro"); +MODULE_AUTHOR("Aleksey Babahin <tamerlan311@gmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); + +/* Module input parameters */ +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Print debug info (bool 1=on, 0=off)"); |