diff options
Diffstat (limited to 'drivers/usb/serial/qcserial.c')
-rw-r--r-- | drivers/usb/serial/qcserial.c | 144 |
1 files changed, 83 insertions, 61 deletions
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 996015c5f1ac..bfd50779f0c9 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -105,6 +105,10 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */ {USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */ {USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ + {USB_DEVICE(0x1199, 0x68a4)}, /* Sierra Wireless QDL */ + {USB_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */ + {USB_DEVICE(0x1199, 0x68a8)}, /* Sierra Wireless QDL */ + {USB_DEVICE(0x1199, 0x68a9)}, /* Sierra Wireless Modem */ {USB_DEVICE(0x1199, 0x9010)}, /* Sierra Wireless Gobi 3000 QDL */ {USB_DEVICE(0x1199, 0x9012)}, /* Sierra Wireless Gobi 3000 QDL */ {USB_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ @@ -112,8 +116,24 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ {USB_DEVICE(0x1199, 0x9018)}, /* Sierra Wireless Gobi 3000 QDL */ {USB_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ + {USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */ {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ + + /* non Gobi Qualcomm serial devices */ + {USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)}, /* Sierra Wireless MC7700 Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 2)}, /* Sierra Wireless MC7700 NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 3)}, /* Sierra Wireless MC7700 Modem */ + {USB_DEVICE_INTERFACE_NUMBER(0x114f, 0x68a2, 0)}, /* Sierra Wireless MC7750 Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x114f, 0x68a2, 2)}, /* Sierra Wireless MC7750 NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x114f, 0x68a2, 3)}, /* Sierra Wireless MC7750 Modem */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 0)}, /* Sierra Wireless MC7710 Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 2)}, /* Sierra Wireless MC7710 NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 3)}, /* Sierra Wireless MC7710 Modem */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)}, /* Sierra Wireless EM7700 Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)}, /* Sierra Wireless EM7700 NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)}, /* Sierra Wireless EM7700 Modem */ + { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); @@ -127,6 +147,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) __u8 nintf; __u8 ifnum; bool is_gobi1k = id->driver_info ? true : false; + int altsetting = -1; dev_dbg(dev, "Is Gobi 1000 = %d\n", is_gobi1k); @@ -142,102 +163,104 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) spin_lock_init(&data->susp_lock); - switch (nintf) { - case 1: + if (nintf == 1) { /* QDL mode */ /* Gobi 2000 has a single altsetting, older ones have two */ if (serial->interface->num_altsetting == 2) intf = &serial->interface->altsetting[1]; else if (serial->interface->num_altsetting > 2) - break; + goto done; if (intf->desc.bNumEndpoints == 2 && usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) && usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) { dev_dbg(dev, "QDL port found\n"); - if (serial->interface->num_altsetting == 1) { + if (serial->interface->num_altsetting == 1) retval = 0; /* Success */ - break; - } - - retval = usb_set_interface(serial->dev, ifnum, 1); - if (retval < 0) { - dev_err(dev, - "Could not set interface, error %d\n", - retval); - retval = -ENODEV; - kfree(data); - } + else + altsetting = 1; } - break; + goto done; - case 3: - case 4: - /* Composite mode; don't bind to the QMI/net interface as that - * gets handled by other drivers. - */ + } + + /* allow any number of interfaces when doing direct interface match */ + if (id->match_flags & USB_DEVICE_ID_MATCH_INT_NUMBER) { + dev_dbg(dev, "Generic Qualcomm serial interface found\n"); + altsetting = 0; + goto done; + } + if (nintf < 3 || nintf > 4) { + dev_err(dev, "unknown number of interfaces: %d\n", nintf); + goto done; + } + + /* default to enabling interface */ + altsetting = 0; + + /* Composite mode; don't bind to the QMI/net interface as that + * gets handled by other drivers. + */ + + if (is_gobi1k) { /* Gobi 1K USB layout: * 0: serial port (doesn't respond) * 1: serial port (doesn't respond) * 2: AT-capable modem port * 3: QMI/net - * - * Gobi 2K+ USB layout: + */ + if (ifnum == 2) + dev_dbg(dev, "Modem port found\n"); + else + altsetting = -1; + } else { + /* Gobi 2K+ USB layout: * 0: QMI/net * 1: DM/DIAG (use libqcdm from ModemManager for communication) * 2: AT-capable modem port * 3: NMEA */ - - if (ifnum == 1 && !is_gobi1k) { + switch (ifnum) { + case 0: + /* Don't claim the QMI/net interface */ + altsetting = -1; + break; + case 1: dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n"); - retval = usb_set_interface(serial->dev, ifnum, 0); - if (retval < 0) { - dev_err(dev, - "Could not set interface, error %d\n", - retval); - retval = -ENODEV; - kfree(data); - } - } else if (ifnum == 2) { + break; + case 2: dev_dbg(dev, "Modem port found\n"); - retval = usb_set_interface(serial->dev, ifnum, 0); - if (retval < 0) { - dev_err(dev, - "Could not set interface, error %d\n", - retval); - retval = -ENODEV; - kfree(data); - } - } else if (ifnum==3 && !is_gobi1k) { + break; + case 3: /* * NMEA (serial line 9600 8N1) * # echo "\$GPS_START" > /dev/ttyUSBx * # echo "\$GPS_STOP" > /dev/ttyUSBx */ dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n"); - retval = usb_set_interface(serial->dev, ifnum, 0); - if (retval < 0) { - dev_err(dev, - "Could not set interface, error %d\n", - retval); - retval = -ENODEV; - kfree(data); - } + break; } - break; + } - default: - dev_err(dev, "unknown number of interfaces: %d\n", nintf); - kfree(data); - retval = -ENODEV; +done: + if (altsetting >= 0) { + retval = usb_set_interface(serial->dev, ifnum, altsetting); + if (retval < 0) { + dev_err(dev, + "Could not set interface, error %d\n", + retval); + retval = -ENODEV; + } } - /* Set serial->private if not returning -ENODEV */ - if (retval != -ENODEV) + /* Set serial->private if not returning error */ + if (retval == 0) usb_set_serial_data(serial, data); + else + kfree(data); + return retval; } @@ -245,8 +268,7 @@ static void qc_release(struct usb_serial *serial) { struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); - /* Call usb_wwan release & free the private data allocated in qcprobe */ - usb_wwan_release(serial); + /* Free the private data allocated in qcprobe */ usb_set_serial_data(serial, NULL); kfree(priv); } @@ -266,8 +288,8 @@ static struct usb_serial_driver qcdevice = { .write_room = usb_wwan_write_room, .chars_in_buffer = usb_wwan_chars_in_buffer, .attach = usb_wwan_startup, - .disconnect = usb_wwan_disconnect, .release = qc_release, + .port_remove = usb_wwan_port_remove, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, .resume = usb_wwan_resume, |