diff options
Diffstat (limited to 'drivers/usb/serial')
44 files changed, 167 insertions, 93 deletions
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index b43d07df4c44..123bf9155339 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -52,7 +52,7 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static int debug; +static bool debug; /* Vendor and Product ID */ #define AIRCABLE_VID 0x16CA diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 18e875b92e00..69328dcfd91a 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -37,7 +37,7 @@ #include <linux/mutex.h> #include <linux/spinlock.h> -static int debug; +static bool debug; /* * Version information */ diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index f9f29b289f2f..29ffeb6279c7 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -37,7 +37,7 @@ #include <linux/usb/serial.h> #include "belkin_sa.h" -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 0e77511060c0..5e53cc59e652 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -70,7 +70,7 @@ #define CH341_NBREAK_BITS_REG2 0x40 -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x4348, 0x5523) }, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index adfe660ed008..8dbf51a43c45 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -39,6 +39,8 @@ static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *port); static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp); +static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *, + struct ktermios *); static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, struct ktermios*); static int cp210x_tiocmget(struct tty_struct *); @@ -49,7 +51,7 @@ static void cp210x_break_ctl(struct tty_struct *, int); static int cp210x_startup(struct usb_serial *); static void cp210x_dtr_rts(struct usb_serial_port *p, int on); -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */ @@ -138,6 +140,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ + { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ { } /* Terminating Entry */ }; @@ -201,6 +204,8 @@ static struct usb_serial_driver cp210x_device = { #define CP210X_EMBED_EVENTS 0x15 #define CP210X_GET_EVENTSTATE 0x16 #define CP210X_SET_CHARS 0x19 +#define CP210X_GET_BAUDRATE 0x1D +#define CP210X_SET_BAUDRATE 0x1E /* CP210X_IFC_ENABLE */ #define UART_ENABLE 0x0001 @@ -360,8 +365,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port, * Quantises the baud rate as per AN205 Table 1 */ static unsigned int cp210x_quantise_baudrate(unsigned int baud) { - if (baud <= 56) baud = 0; - else if (baud <= 300) baud = 300; + if (baud <= 300) + baud = 300; else if (baud <= 600) baud = 600; else if (baud <= 1200) baud = 1200; else if (baud <= 1800) baud = 1800; @@ -389,10 +394,10 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) { else if (baud <= 491520) baud = 460800; else if (baud <= 567138) baud = 500000; else if (baud <= 670254) baud = 576000; - else if (baud <= 1053257) baud = 921600; - else if (baud <= 1474560) baud = 1228800; - else if (baud <= 2457600) baud = 1843200; - else baud = 3686400; + else if (baud < 1000000) + baud = 921600; + else if (baud > 2000000) + baud = 2000000; return baud; } @@ -409,13 +414,14 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) return result; } - result = usb_serial_generic_open(tty, port); - if (result) - return result; - /* Configure the termios structure */ cp210x_get_termios(tty, port); - return 0; + + /* The baud rate must be initialised on cp2104 */ + if (tty) + cp210x_change_speed(tty, port, NULL); + + return usb_serial_generic_open(tty, port); } static void cp210x_close(struct usb_serial_port *port) @@ -467,10 +473,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2); - /* Convert to baudrate */ - if (baud) - baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); + cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4); dbg("%s - baud rate = %d", __func__, baud); *baudp = baud; @@ -579,11 +582,64 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, *cflagp = cflag; } +/* + * CP2101 supports the following baud rates: + * + * 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800, + * 38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600 + * + * CP2102 and CP2103 support the following additional rates: + * + * 4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000, + * 576000 + * + * The device will map a requested rate to a supported one, but the result + * of requests for rates greater than 1053257 is undefined (see AN205). + * + * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud, + * respectively, with an error less than 1%. The actual rates are determined + * by + * + * div = round(freq / (2 x prescale x request)) + * actual = freq / (2 x prescale x div) + * + * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps + * or 1 otherwise. + * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1 + * otherwise. + */ +static void cp210x_change_speed(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + u32 baud; + + baud = tty->termios->c_ospeed; + + /* This maps the requested rate to a rate valid on cp2102 or cp2103, + * or to an arbitrary rate in [1M,2M]. + * + * NOTE: B0 is not implemented. + */ + baud = cp210x_quantise_baudrate(baud); + + dbg("%s - setting baud rate to %u", __func__, baud); + if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, + sizeof(baud))) { + dev_warn(&port->dev, "failed to set baud rate to %u\n", baud); + if (old_termios) + baud = old_termios->c_ospeed; + else + baud = 9600; + } + + tty_encode_baud_rate(tty, baud, baud); +} + static void cp210x_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { unsigned int cflag, old_cflag; - unsigned int baud = 0, bits; + unsigned int bits; unsigned int modem_ctl[4]; dbg("%s - port %d", __func__, port->number); @@ -593,20 +649,9 @@ static void cp210x_set_termios(struct tty_struct *tty, cflag = tty->termios->c_cflag; old_cflag = old_termios->c_cflag; - baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty)); - - /* If the baud rate is to be updated*/ - if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { - dbg("%s - Setting baud rate to %d baud", __func__, - baud); - if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV, - ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { - dbg("Baud rate requested not supported by device"); - baud = tty_termios_baud_rate(old_termios); - } - } - /* Report back the resulting baud rate */ - tty_encode_baud_rate(tty, baud, baud); + + if (tty->termios->c_ospeed != old_termios->c_ospeed) + cp210x_change_speed(tty, port, old_termios); /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 98bf83349838..6bc3802a581a 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -43,7 +43,7 @@ #define CYBERJACK_LOCAL_BUF_SIZE 32 -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 07680d6b792b..3bdeafa29c24 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -46,10 +46,10 @@ #include "cypress_m8.h" -static int debug; -static int stats; +static bool debug; +static bool stats; static int interval; -static int unstable_bauds; +static bool unstable_bauds; /* * Version Information diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 6d26a77d0f2a..b23bebd721a1 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -251,7 +251,7 @@ static int digi_read_oob_callback(struct urb *urb); /* Statics */ -static int debug; +static bool debug; static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 504b5585ea45..aced6817bf95 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -28,7 +28,7 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c290df97108e..ad654f8208ef 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -55,7 +55,7 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "USB FTDI Serial Converters Driver" -static int debug; +static bool debug; static __u16 vendor = FTDI_VID; static __u16 product; @@ -797,6 +797,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, @@ -805,6 +806,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) }, { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) }, { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) }, @@ -841,6 +844,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(ST_VID, ST_STMCLT1030_PID), .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_RF_R106) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -1333,8 +1337,7 @@ static int set_serial_info(struct tty_struct *tty, goto check_and_exit; } - if ((new_serial.baud_base != priv->baud_base) && - (new_serial.baud_base < 9600)) { + if (new_serial.baud_base != priv->baud_base) { mutex_unlock(&priv->cfg_lock); return -EINVAL; } @@ -1824,6 +1827,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) { + struct ktermios dummy; struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); int result; @@ -1842,8 +1846,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) This is same behaviour as serial.c/rs_open() - Kuba */ /* ftdi_set_termios will send usb control messages */ - if (tty) - ftdi_set_termios(tty, port, tty->termios); + if (tty) { + memset(&dummy, 0, sizeof(dummy)); + ftdi_set_termios(tty, port, &dummy); + } /* Start reading from the device */ result = usb_serial_generic_open(tty, port); diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index df1d7da933ec..f994503df2dd 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -39,6 +39,13 @@ /* www.candapter.com Ewert Energy Systems CANdapter device */ #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ +/* + * Texas Instruments XDS100v2 JTAG / BeagleBone A3 + * http://processors.wiki.ti.com/index.php/XDS100 + * http://beagleboard.org/bone + */ +#define TI_XDS100V2_PID 0xa6d0 + #define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ /* US Interface Navigator (http://www.usinterface.com/) */ @@ -525,6 +532,12 @@ #define ADI_GNICEPLUS_PID 0xF001 /* + * Hornby Elite + */ +#define HORNBY_VID 0x04D8 +#define HORNBY_ELITE_PID 0x000A + +/* * RATOC REX-USB60F */ #define RATOC_VENDOR_ID 0x0584 @@ -1168,3 +1181,9 @@ */ /* TagTracer MIFARE*/ #define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID 0xF7C0 + +/* + * Rainforest Automation + */ +/* ZigBee controller */ +#define FTDI_RF_R106 0x8A28 diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index e21ce9ddfc63..5d4b099dcf8b 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -16,7 +16,7 @@ #include <linux/usb/serial.h> #include <linux/uaccess.h> -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1404, 0xcddc) }, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index bf12565f8e87..21343378c322 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -42,7 +42,7 @@ static int initial_mode = 1; /* debug flag */ -static int debug; +static bool debug; #define GARMIN_VENDOR_ID 0x091E diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index abd2ee2b2f99..0497575e4799 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -191,7 +191,7 @@ static const struct divisor_table_entry divisor_table[] = { }; /* local variables */ -static int debug; +static bool debug; static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */ diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index e44d375edaad..5818bfc3261e 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -210,10 +210,10 @@ static unsigned char OperationalMajorVersion; static unsigned char OperationalMinorVersion; static unsigned short OperationalBuildNumber; -static int debug; +static bool debug; static int closing_wait = EDGE_CLOSING_WAIT; -static int ignore_cpu_rev; +static bool ignore_cpu_rev; static int default_uart_mode; /* RS232 */ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, @@ -2657,15 +2657,7 @@ cleanup: static void edge_disconnect(struct usb_serial *serial) { - int i; - struct edgeport_port *edge_port; - dbg("%s", __func__); - - for (i = 0; i < serial->num_ports; ++i) { - edge_port = usb_get_serial_port_data(serial->port[i]); - edge_remove_sysfs_attrs(edge_port->port); - } } static void edge_release(struct usb_serial *serial) @@ -2744,6 +2736,7 @@ static struct usb_serial_driver edgeport_1port_device = { .disconnect = edge_disconnect, .release = edge_release, .port_probe = edge_create_sysfs_attrs, + .port_remove = edge_remove_sysfs_attrs, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, @@ -2775,6 +2768,7 @@ static struct usb_serial_driver edgeport_2port_device = { .disconnect = edge_disconnect, .release = edge_release, .port_probe = edge_create_sysfs_attrs, + .port_remove = edge_remove_sysfs_attrs, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 36f5cbe90485..06053a920dd8 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -34,7 +34,7 @@ #define DRIVER_DESC "USB PocketPC PDA driver" static __u16 product, vendor; -static int debug; +static bool debug; static int connect_retries = KP_RETRIES; static int initial_wait; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 5170799d6e94..6f9356f3f99e 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -147,7 +147,7 @@ static struct usb_driver usb_ipw_driver = { .no_dynamic_id = 1, }; -static int debug; +static bool debug; static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) { diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 0c537da0d3cd..84a396e83671 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -45,7 +45,7 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "USB IR Dongle driver" -static int debug; +static bool debug; /* if overridden by the user, then use their value for the size of the read and * write urbs */ diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 64d0ffd4440b..3077a4436976 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -34,9 +34,9 @@ #ifdef CONFIG_USB_SERIAL_DEBUG -static int debug = 1; +static bool debug = 1; #else -static int debug; +static bool debug; #endif /* @@ -65,7 +65,7 @@ static int clockmode = 1; static int cdmode = 1; static int iuu_cardin; static int iuu_cardout; -static int xmas; +static bool xmas; static int vcc_default = 5; static void read_rxcmd_callback(struct urb *urb); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index bc8dc203e818..4cc36c761801 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -45,7 +45,7 @@ #include <linux/usb/serial.h> #include "keyspan.h" -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index a40615674a68..7c62a7048302 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -31,7 +31,7 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static int debug; +static bool debug; /* make a simple define to handle if we are compiling keyspan_pda or xircom support */ #if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE) diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 19373cb7c5bf..fc064e1442ca 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -49,7 +49,7 @@ #include <linux/usb/serial.h> #include "kl5kusb105.h" -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 5d3beeeb5fd9..a92a3efb507b 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -38,7 +38,7 @@ #include <linux/ioctl.h> #include "kobil_sct.h" -static int debug; +static bool debug; /* Version Information */ #define DRIVER_VERSION "21/05/2004" diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index a975bb80303f..27fa9c8a77b0 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -45,7 +45,7 @@ #define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>" #define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver" -static int debug; +static bool debug; /* * Function prototypes diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 19d112f51b97..4554ee49e635 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -71,7 +71,7 @@ struct moschip_port { struct urb *write_urb_pool[NUM_URBS]; }; -static int debug; +static bool debug; static struct usb_serial_driver moschip7720_2port_driver; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 55cfd6265b98..03b5e249e95e 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -263,7 +263,7 @@ struct moschip_port { }; -static int debug; +static bool debug; /* * mos7840_set_reg_sync diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 1f00f243c26c..b28f1db0195f 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -21,7 +21,7 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0a99, 0x0001) }, /* Talon Technology device */ diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 45a8c55881d3..8b8d58a2ac12 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -23,7 +23,7 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 691f57a9d712..262ded9e076b 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -32,7 +32,7 @@ * an examples of 1D barcode types are EAN, UPC, Code39, IATA etc.. */ #define DRIVER_DESC "Opticon USB barcode to serial driver (1D)" -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x065a, 0x0009) }, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c96b6b6509fb..ea126a4490cd 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -480,6 +480,10 @@ static void option_instat_callback(struct urb *urb); #define ZD_VENDOR_ID 0x0685 #define ZD_PRODUCT_7000 0x7000 +/* LG products */ +#define LG_VENDOR_ID 0x1004 +#define LG_PRODUCT_L02C 0x618f + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -1183,6 +1187,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) }, + { USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); @@ -1234,7 +1239,7 @@ static struct usb_serial_driver option_1port_device = { #endif }; -static int debug; +static bool debug; /* per port private data */ diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 2161d1c3c089..e287fd32682c 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -74,7 +74,7 @@ static struct usb_driver oti6858_driver = { .no_dynamic_id = 1, }; -static int debug; +static bool debug; /* requests */ #define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 329295615d06..3d8cda57ce7a 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -36,7 +36,7 @@ */ #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" -static int debug; +static bool debug; #define PL2303_CLOSING_WAIT (30*HZ) diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index 30b73e68a904..a34819884c1a 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -36,6 +36,7 @@ #define UTSTARCOM_PRODUCT_UM175_V1 0x3712 #define UTSTARCOM_PRODUCT_UM175_V2 0x3714 #define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 +#define PANTECH_PRODUCT_UML190_VZW 0x3716 #define PANTECH_PRODUCT_UML290_VZW 0x3718 /* CMOTECH devices */ @@ -67,7 +68,11 @@ static struct usb_device_id id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) }, - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) }, /* NMEA */ + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) }, /* WMC */ + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, /* DIAG */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index aa9367f5b421..1d5deee3be52 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -22,7 +22,7 @@ #define DRIVER_AUTHOR "Qualcomm Inc" #define DRIVER_DESC "Qualcomm USB Serial driver" -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { {USB_DEVICE(0x05c6, 0x9211)}, /* Acer Gobi QDL device */ diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index a36e2313eed0..d074b3740dcb 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -81,9 +81,9 @@ #define CONFIG_USB_SERIAL_SAFE_PADDED 0 #endif -static int debug; -static int safe = 1; -static int padded = CONFIG_USB_SERIAL_SAFE_PADDED; +static bool debug; +static bool safe = 1; +static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED; #define DRIVER_VERSION "v0.1" #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>" diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index f2485429172f..fdae0a4407cb 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -46,8 +46,8 @@ allocations > PAGE_SIZE and the number of packets in a page is an integer 512 is the largest possible packet on EHCI */ -static int debug; -static int nmea; +static bool debug; +static bool nmea; /* Used in interface blacklisting */ struct sierra_iface_info { diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 180ea6c7911c..d7f5eee18f00 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -33,7 +33,7 @@ #define DRIVER_VERSION "v0.10" #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" -static int debug; +static bool debug; #define SPCP8x5_007_VID 0x04FC #define SPCP8x5_007_PID 0x0201 diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 87362e48796e..7697858d8858 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -46,7 +46,7 @@ #define FULLPWRBIT 0x00000080 #define NEXT_BOARD_POWER_BIT 0x00000004 -static int debug; +static bool debug; /* Version Information */ #define DRIVER_VERSION "v0.1" diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index c70cc012d03f..50651cf4fc61 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -20,7 +20,7 @@ #include <linux/usb/serial.h> #include <linux/uaccess.h> -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x05e0, 0x0600) }, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 4af21f46096e..8468eb769a29 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -150,7 +150,7 @@ static int ti_download_firmware(struct ti_device *tdev); /* Data */ /* module parameters */ -static int debug; +static bool debug; static int closing_wait = TI_DEFAULT_CLOSING_WAIT; static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT]; static unsigned int vendor_3410_count; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index ce6c1a65a544..611b206591cb 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -61,7 +61,7 @@ static struct usb_driver usb_serial_driver = { drivers depend on it. */ -static int debug; +static bool debug; /* initially all NULL */ static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; static DEFINE_MUTEX(table_lock); diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index d555ca9567b8..c88657dd31c8 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -37,7 +37,7 @@ #include <linux/serial.h> #include "usb-wwan.h" -static int debug; +static bool debug; void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) { diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 1c11959a7d58..210e4b10dc11 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -52,7 +52,7 @@ static int palm_os_4_probe(struct usb_serial *serial, const struct usb_device_id *id); /* Parameters that may be passed into the module. */ -static int debug; +static bool debug; static __u16 vendor; static __u16 product; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 11af903cb09f..7e0acf5c8e38 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -36,7 +36,7 @@ #include <linux/ihex.h> #include "whiteheat.h" /* WhiteHEAT specific commands */ -static int debug; +static bool debug; #ifndef CMSPAR #define CMSPAR 0 |