diff options
Diffstat (limited to 'drivers/usb/serial')
| -rw-r--r-- | drivers/usb/serial/ark3116.c | 10 | ||||
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 15 | ||||
| -rw-r--r-- | drivers/usb/serial/ftdi_sio_ids.h | 1 | ||||
| -rw-r--r-- | drivers/usb/serial/option.c | 37 | ||||
| -rw-r--r-- | drivers/usb/serial/pl2303.c | 1 | ||||
| -rw-r--r-- | drivers/usb/serial/pl2303.h | 4 |
6 files changed, 55 insertions, 13 deletions
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 5cdb9d912275..18e875b92e00 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -42,7 +42,7 @@ static int debug; * Version information */ -#define DRIVER_VERSION "v0.6" +#define DRIVER_VERSION "v0.7" #define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>" #define DRIVER_DESC "USB ARK3116 serial/IrDA driver" #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA" @@ -380,10 +380,6 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) goto err_out; } - /* setup termios */ - if (tty) - ark3116_set_termios(tty, port, NULL); - /* remove any data still left: also clears error state */ ark3116_read_reg(serial, UART_RX, buf); @@ -406,6 +402,10 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) /* enable DMA */ ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT); + /* setup termios */ + if (tty) + ark3116_set_termios(tty, port, NULL); + err_out: kfree(buf); return result; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8fe034d2d3e7..ff3db5d056a5 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -736,6 +736,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID), @@ -2104,13 +2105,19 @@ static void ftdi_set_termios(struct tty_struct *tty, cflag = termios->c_cflag; - /* FIXME -For this cut I don't care if the line is really changing or - not - so just do the change regardless - should be able to - compare old_termios and tty->termios */ + if (old_termios->c_cflag == termios->c_cflag + && old_termios->c_ispeed == termios->c_ispeed + && old_termios->c_ospeed == termios->c_ospeed) + goto no_c_cflag_changes; + /* NOTE These routines can get interrupted by ftdi_sio_read_bulk_callback - need to examine what this means - don't see any problems yet */ + if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) == + (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB))) + goto no_data_parity_stop_changes; + /* Set number of data bits, parity, stop bits */ urb_value = 0; @@ -2151,6 +2158,7 @@ static void ftdi_set_termios(struct tty_struct *tty, } /* Now do the baudrate */ +no_data_parity_stop_changes: if ((cflag & CBAUD) == B0) { /* Disable flow control */ if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -2178,6 +2186,7 @@ static void ftdi_set_termios(struct tty_struct *tty, /* Set flow control */ /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ +no_c_cflag_changes: if (cflag & CRTSCTS) { dbg("%s Setting to CRTSCTS flow control", __func__); if (usb_control_msg(dev, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 571fa96b49c7..055b64ef0bba 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -112,6 +112,7 @@ /* Propox devices */ #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 +#define FTDI_PROPOX_ISPCABLEIII_PID 0xD739 /* Lenz LI-USB Computer Interface. */ #define FTDI_LENZ_LIUSB_PID 0xD780 diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 89ae1f65e1b1..6dd64534fad0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -156,6 +156,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_K4511 0x14CC #define HUAWEI_PRODUCT_ETS1220 0x1803 #define HUAWEI_PRODUCT_E353 0x1506 +#define HUAWEI_PRODUCT_E173S 0x1C05 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -316,6 +317,9 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_AC8710 0xfff1 #define ZTE_PRODUCT_AC2726 0xfff5 #define ZTE_PRODUCT_AC8710T 0xffff +#define ZTE_PRODUCT_MC2718 0xffe8 +#define ZTE_PRODUCT_AD3812 0xffeb +#define ZTE_PRODUCT_MC2716 0xffed #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -468,6 +472,10 @@ static void option_instat_callback(struct urb *urb); #define YUGA_PRODUCT_CLU528 0x260D #define YUGA_PRODUCT_CLU526 0x260F +/* Viettel products */ +#define VIETTEL_VENDOR_ID 0x2262 +#define VIETTEL_PRODUCT_VT1000 0x0002 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -500,6 +508,18 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = { .reserved = BIT(4), }; +static const struct option_blacklist_info zte_ad3812_z_blacklist = { + .sendsetup = BIT(0) | BIT(1) | BIT(2), +}; + +static const struct option_blacklist_info zte_mc2718_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), +}; + +static const struct option_blacklist_info zte_mc2716_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3), +}; + static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -622,6 +642,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), @@ -640,6 +661,14 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x31) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x32) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x10) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x12) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x13) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x01) }, /* E398 3G Modem */ + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x02) }, /* E398 3G PC UI Interface */ + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x03) }, /* E398 3G Application Interface */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, @@ -726,6 +755,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, @@ -1043,6 +1073,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ @@ -1141,6 +1177,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) }, { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, + { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 9083d1e616b4..fc2d66f7f4eb 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) }, - { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) }, { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 3d10d7f02072..c38b8c00c06f 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -145,10 +145,6 @@ #define ADLINK_VENDOR_ID 0x0b63 #define ADLINK_ND6530_PRODUCT_ID 0x6530 -/* WinChipHead USB->RS 232 adapter */ -#define WINCHIPHEAD_VENDOR_ID 0x4348 -#define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523 - /* SMART USB Serial Adapter */ #define SMART_VENDOR_ID 0x0b8c #define SMART_PRODUCT_ID 0x2303 |