diff options
Diffstat (limited to 'drivers/usb/serial')
| -rw-r--r-- | drivers/usb/serial/ch341.c | 2 | ||||
| -rw-r--r-- | drivers/usb/serial/cp210x.c | 306 | ||||
| -rw-r--r-- | drivers/usb/serial/cyberjack.c | 3 | ||||
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 10 | ||||
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.h | 8 | ||||
| -rw-r--r-- | drivers/usb/serial/garmin_gps.c | 51 | ||||
| -rw-r--r-- | drivers/usb/serial/iuu_phoenix.c | 4 | ||||
| -rw-r--r-- | drivers/usb/serial/keyspan.c | 2 | ||||
| -rw-r--r-- | drivers/usb/serial/kl5kusb105.c | 3 | ||||
| -rw-r--r-- | drivers/usb/serial/mos7840.c | 4 | ||||
| -rw-r--r-- | drivers/usb/serial/quatech2.c | 2 | ||||
| -rw-r--r-- | drivers/usb/serial/safe_serial.c | 11 |
12 files changed, 228 insertions, 178 deletions
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index c73808f095bb..f139488d0816 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -370,7 +370,7 @@ static void ch341_set_termios(struct tty_struct *tty, static void ch341_break_ctl(struct tty_struct *tty, int break_state) { const uint16_t ch341_break_reg = - CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8); + ((uint16_t) CH341_REG_BREAK2 << 8) | CH341_REG_BREAK1; struct usb_serial_port *port = tty->driver_data; int r; uint16_t reg_contents; diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 73a366de5102..fbfe761c7fba 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -327,113 +327,169 @@ struct cp210x_comm_status { #define PURGE_ALL 0x000f /* - * cp210x_get_config - * Reads from the CP210x configuration registers - * 'size' is specified in bytes. - * 'data' is a pointer to a pre-allocated array of integers large - * enough to hold 'size' bytes (with 4 bytes to each integer) + * Reads a variable-sized block of CP210X_ registers, identified by req. + * Returns data into buf in native USB byte order. */ -static int cp210x_get_config(struct usb_serial_port *port, u8 request, - unsigned int *data, int size) +static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req, + void *buf, int bufsize) { struct usb_serial *serial = port->serial; struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); - __le32 *buf; - int result, i, length; - - /* Number of integers required to contain the array */ - length = (((size - 1) | 3) + 1) / 4; + void *dmabuf; + int result; - buf = kcalloc(length, sizeof(__le32), GFP_KERNEL); - if (!buf) + dmabuf = kmalloc(bufsize, GFP_KERNEL); + if (!dmabuf) { + /* + * FIXME Some callers don't bother to check for error, + * at least give them consistent junk until they are fixed + */ + memset(buf, 0, bufsize); return -ENOMEM; + } - /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - request, REQTYPE_INTERFACE_TO_HOST, 0x0000, - port_priv->bInterfaceNumber, buf, size, - USB_CTRL_GET_TIMEOUT); + req, REQTYPE_INTERFACE_TO_HOST, 0, + port_priv->bInterfaceNumber, dmabuf, bufsize, + USB_CTRL_SET_TIMEOUT); + if (result == bufsize) { + memcpy(buf, dmabuf, bufsize); + result = 0; + } else { + dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n", + req, bufsize, result); + if (result >= 0) + result = -EPROTO; - /* Convert data into an array of integers */ - for (i = 0; i < length; i++) - data[i] = le32_to_cpu(buf[i]); + /* + * FIXME Some callers don't bother to check for error, + * at least give them consistent junk until they are fixed + */ + memset(buf, 0, bufsize); + } - kfree(buf); + kfree(dmabuf); - if (result != size) { - dev_dbg(&port->dev, "%s - Unable to send config request, request=0x%x size=%d result=%d\n", - __func__, request, size, result); - if (result > 0) - result = -EPROTO; + return result; +} - return result; +/* + * Reads any 32-bit CP210X_ register identified by req. + */ +static int cp210x_read_u32_reg(struct usb_serial_port *port, u8 req, u32 *val) +{ + __le32 le32_val; + int err; + + err = cp210x_read_reg_block(port, req, &le32_val, sizeof(le32_val)); + if (err) { + /* + * FIXME Some callers don't bother to check for error, + * at least give them consistent junk until they are fixed + */ + *val = 0; + return err; } + *val = le32_to_cpu(le32_val); + + return 0; +} + +/* + * Reads any 16-bit CP210X_ register identified by req. + */ +static int cp210x_read_u16_reg(struct usb_serial_port *port, u8 req, u16 *val) +{ + __le16 le16_val; + int err; + + err = cp210x_read_reg_block(port, req, &le16_val, sizeof(le16_val)); + if (err) + return err; + + *val = le16_to_cpu(le16_val); + return 0; } /* - * cp210x_set_config - * Writes to the CP210x configuration registers - * Values less than 16 bits wide are sent directly - * 'size' is specified in bytes. + * Reads any 8-bit CP210X_ register identified by req. + */ +static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val) +{ + return cp210x_read_reg_block(port, req, val, sizeof(*val)); +} + +/* + * Writes any 16-bit CP210X_ register (req) whose value is passed + * entirely in the wValue field of the USB request. */ -static int cp210x_set_config(struct usb_serial_port *port, u8 request, - unsigned int *data, int size) +static int cp210x_write_u16_reg(struct usb_serial_port *port, u8 req, u16 val) { struct usb_serial *serial = port->serial; struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); - __le32 *buf; - int result, i, length; + int result; + + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + req, REQTYPE_HOST_TO_INTERFACE, val, + port_priv->bInterfaceNumber, NULL, 0, + USB_CTRL_SET_TIMEOUT); + if (result < 0) { + dev_err(&port->dev, "failed set request 0x%x status: %d\n", + req, result); + } + + return result; +} - /* Number of integers required to contain the array */ - length = (((size - 1) | 3) + 1) / 4; +/* + * Writes a variable-sized block of CP210X_ registers, identified by req. + * Data in buf must be in native USB byte order. + */ +static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req, + void *buf, int bufsize) +{ + struct usb_serial *serial = port->serial; + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + void *dmabuf; + int result; - buf = kmalloc(length * sizeof(__le32), GFP_KERNEL); - if (!buf) + dmabuf = kmalloc(bufsize, GFP_KERNEL); + if (!dmabuf) return -ENOMEM; - /* Array of integers into bytes */ - for (i = 0; i < length; i++) - buf[i] = cpu_to_le32(data[i]); + memcpy(dmabuf, buf, bufsize); - if (size > 2) { - result = usb_control_msg(serial->dev, - usb_sndctrlpipe(serial->dev, 0), - request, REQTYPE_HOST_TO_INTERFACE, 0x0000, - port_priv->bInterfaceNumber, buf, size, - USB_CTRL_SET_TIMEOUT); - } else { - result = usb_control_msg(serial->dev, - usb_sndctrlpipe(serial->dev, 0), - request, REQTYPE_HOST_TO_INTERFACE, data[0], - port_priv->bInterfaceNumber, NULL, 0, - USB_CTRL_SET_TIMEOUT); - } + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + req, REQTYPE_HOST_TO_INTERFACE, 0, + port_priv->bInterfaceNumber, dmabuf, bufsize, + USB_CTRL_SET_TIMEOUT); - kfree(buf); + kfree(dmabuf); - if ((size > 2 && result != size) || result < 0) { - dev_dbg(&port->dev, "%s - Unable to send request, request=0x%x size=%d result=%d\n", - __func__, request, size, result); - if (result > 0) + if (result == bufsize) { + result = 0; + } else { + dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n", + req, bufsize, result); + if (result >= 0) result = -EPROTO; - - return result; } - return 0; + return result; } /* - * cp210x_set_config_single - * Convenience function for calling cp210x_set_config on single data values - * without requiring an integer pointer + * Writes any 32-bit CP210X_ register identified by req. */ -static inline int cp210x_set_config_single(struct usb_serial_port *port, - u8 request, unsigned int data) +static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val) { - return cp210x_set_config(port, request, &data, 2); + __le32 le32_val; + + le32_val = cpu_to_le32(val); + + return cp210x_write_reg_block(port, req, &le32_val, sizeof(le32_val)); } /* @@ -445,47 +501,46 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port, static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port) { struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); - unsigned int line_ctl_save; - unsigned int line_ctl_test; + u16 line_ctl_save; + u16 line_ctl_test; int err; - err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_save, 2); + err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_save); if (err) return err; - line_ctl_test = 0x800; - err = cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_test, 2); + err = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, 0x800); if (err) return err; - err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_test, 2); + err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_test); if (err) return err; if (line_ctl_test == 8) { port_priv->has_swapped_line_ctl = true; - line_ctl_save = swab16((u16)line_ctl_save); + line_ctl_save = swab16(line_ctl_save); } - return cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_save, 2); + return cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, line_ctl_save); } /* - * Must always be called instead of cp210x_get_config(CP210X_GET_LINE_CTL) + * Must always be called instead of cp210x_read_u16_reg(CP210X_GET_LINE_CTL) * to workaround cp2108 bug and get correct value. */ -static int cp210x_get_line_ctl(struct usb_serial_port *port, unsigned int *ctl) +static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl) { struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); int err; - err = cp210x_get_config(port, CP210X_GET_LINE_CTL, ctl, 2); + err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, ctl); if (err) return err; /* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */ if (port_priv->has_swapped_line_ctl) - *ctl = swab16((u16)(*ctl)); + *ctl = swab16(*ctl); return 0; } @@ -536,8 +591,7 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) { int result; - result = cp210x_set_config_single(port, CP210X_IFC_ENABLE, - UART_ENABLE); + result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE); if (result) { dev_err(&port->dev, "%s - Unable to enable UART\n", __func__); return result; @@ -555,15 +609,12 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) static void cp210x_close(struct usb_serial_port *port) { - unsigned int purge_ctl; - usb_serial_generic_close(port); /* Clear both queues; cp2108 needs this to avoid an occasional hang */ - purge_ctl = PURGE_ALL; - cp210x_set_config(port, CP210X_PURGE, &purge_ctl, 2); + cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL); - cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); + cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE); } /* @@ -641,11 +692,12 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp) { struct device *dev = &port->dev; - unsigned int cflag, modem_ctl[4]; - unsigned int baud; - unsigned int bits; + unsigned int cflag; + u8 modem_ctl[16]; + u32 baud; + u16 bits; - cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4); + cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud); dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud); *baudp = baud; @@ -676,14 +728,14 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits); break; default: dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits); break; } @@ -714,7 +766,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits); break; } @@ -726,7 +778,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, case BITS_STOP_1_5: dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__); bits &= ~BITS_STOP_MASK; - cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits); break; case BITS_STOP_2: dev_dbg(dev, "%s - stop bits = 2\n", __func__); @@ -735,12 +787,13 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, default: dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__); bits &= ~BITS_STOP_MASK; - cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits); break; } - cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); - if (modem_ctl[0] & 0x0008) { + cp210x_read_reg_block(port, CP210X_GET_FLOW, modem_ctl, + sizeof(modem_ctl)); + if (modem_ctl[0] & 0x08) { dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__); cflag |= CRTSCTS; } else { @@ -792,8 +845,7 @@ static void cp210x_change_speed(struct tty_struct *tty, baud = cp210x_quantise_baudrate(baud); dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud); - if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, - sizeof(baud))) { + if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) { dev_warn(&port->dev, "failed to set baud rate to %u\n", baud); if (old_termios) baud = old_termios->c_ospeed; @@ -809,8 +861,8 @@ static void cp210x_set_termios(struct tty_struct *tty, { struct device *dev = &port->dev; unsigned int cflag, old_cflag; - unsigned int bits; - unsigned int modem_ctl[4]; + u16 bits; + u8 modem_ctl[16]; cflag = tty->termios.c_cflag; old_cflag = old_termios->c_cflag; @@ -848,7 +900,7 @@ static void cp210x_set_termios(struct tty_struct *tty, bits |= BITS_DATA_8; break; } - if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) + if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits)) dev_dbg(dev, "Number of data bits requested not supported by device\n"); } @@ -875,7 +927,7 @@ static void cp210x_set_termios(struct tty_struct *tty, } } } - if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) + if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits)) dev_dbg(dev, "Parity mode not supported by device\n"); } @@ -889,32 +941,40 @@ static void cp210x_set_termios(struct tty_struct *tty, bits |= BITS_STOP_1; dev_dbg(dev, "%s - stop bits = 1\n", __func__); } - if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) + if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits)) dev_dbg(dev, "Number of stop bits requested not supported by device\n"); } if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { - cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); - dev_dbg(dev, "%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n", - __func__, modem_ctl[0], modem_ctl[1], - modem_ctl[2], modem_ctl[3]); + + /* Only bytes 0, 4 and 7 out of first 8 have functional bits */ + + cp210x_read_reg_block(port, CP210X_GET_FLOW, modem_ctl, + sizeof(modem_ctl)); + dev_dbg(dev, "%s - read modem controls = %02x .. .. .. %02x .. .. %02x\n", + __func__, modem_ctl[0], modem_ctl[4], modem_ctl[7]); if (cflag & CRTSCTS) { modem_ctl[0] &= ~0x7B; modem_ctl[0] |= 0x09; - modem_ctl[1] = 0x80; + modem_ctl[4] = 0x80; + /* FIXME - why clear reserved bits just read? */ + modem_ctl[5] = 0; + modem_ctl[6] = 0; + modem_ctl[7] = 0; dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__); } else { modem_ctl[0] &= ~0x7B; modem_ctl[0] |= 0x01; - modem_ctl[1] |= 0x40; + /* FIXME - OR here instead of assignment looks wrong */ + modem_ctl[4] |= 0x40; dev_dbg(dev, "%s - flow control = NONE\n", __func__); } - dev_dbg(dev, "%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n", - __func__, modem_ctl[0], modem_ctl[1], - modem_ctl[2], modem_ctl[3]); - cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16); + dev_dbg(dev, "%s - write modem controls = %02x .. .. .. %02x .. .. %02x\n", + __func__, modem_ctl[0], modem_ctl[4], modem_ctl[7]); + cp210x_write_reg_block(port, CP210X_SET_FLOW, modem_ctl, + sizeof(modem_ctl)); } } @@ -929,7 +989,7 @@ static int cp210x_tiocmset(struct tty_struct *tty, static int cp210x_tiocmset_port(struct usb_serial_port *port, unsigned int set, unsigned int clear) { - unsigned int control = 0; + u16 control = 0; if (set & TIOCM_RTS) { control |= CONTROL_RTS; @@ -950,7 +1010,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control); - return cp210x_set_config(port, CP210X_SET_MHS, &control, 2); + return cp210x_write_u16_reg(port, CP210X_SET_MHS, control); } static void cp210x_dtr_rts(struct usb_serial_port *p, int on) @@ -964,10 +1024,10 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on) static int cp210x_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - unsigned int control; + u8 control; int result; - cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1); + cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control); result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) |((control & CONTROL_RTS) ? TIOCM_RTS : 0) @@ -984,7 +1044,7 @@ static int cp210x_tiocmget(struct tty_struct *tty) static void cp210x_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; - unsigned int state; + u16 state; if (break_state == 0) state = BREAK_OFF; @@ -992,7 +1052,7 @@ static void cp210x_break_ctl(struct tty_struct *tty, int break_state) state = BREAK_ON; dev_dbg(&port->dev, "%s - turning break %s\n", __func__, state == BREAK_OFF ? "off" : "on"); - cp210x_set_config(port, CP210X_SET_BREAK, &state, 2); + cp210x_write_u16_reg(port, CP210X_SET_BREAK, state); } static int cp210x_port_probe(struct usb_serial_port *port) diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 2916dea3ede8..5f17a3b9916d 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -140,7 +140,6 @@ static int cyberjack_open(struct tty_struct *tty, { struct cyberjack_private *priv; unsigned long flags; - int result = 0; dev_dbg(&port->dev, "%s - usb_clear_halt\n", __func__); usb_clear_halt(port->serial->dev, port->write_urb->pipe); @@ -152,7 +151,7 @@ static int cyberjack_open(struct tty_struct *tty, priv->wrsent = 0; spin_unlock_irqrestore(&priv->lock, flags); - return result; + return 0; } static void cyberjack_close(struct usb_serial_port *port) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8c660ae401d8..427ae43ee898 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1320,11 +1320,11 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, if (baud <= 3000000) { __u16 product_id = le16_to_cpu( port->serial->dev->descriptor.idProduct); - if (((FTDI_NDI_HUC_PID == product_id) || - (FTDI_NDI_SPECTRA_SCU_PID == product_id) || - (FTDI_NDI_FUTURE_2_PID == product_id) || - (FTDI_NDI_FUTURE_3_PID == product_id) || - (FTDI_NDI_AURORA_SCU_PID == product_id)) && + if (((product_id == FTDI_NDI_HUC_PID) || + (product_id == FTDI_NDI_SPECTRA_SCU_PID) || + (product_id == FTDI_NDI_FUTURE_2_PID) || + (product_id == FTDI_NDI_FUTURE_3_PID) || + (product_id == FTDI_NDI_AURORA_SCU_PID)) && (baud == 19200)) { baud = 1200000; } diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index ed58c6fa8dbe..bbcc13df11ac 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -239,11 +239,11 @@ enum ftdi_sio_baudrate { */ #define FTDI_SIO_SET_DTR_MASK 0x1 -#define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK << 8)) -#define FTDI_SIO_SET_DTR_LOW (0 | (FTDI_SIO_SET_DTR_MASK << 8)) +#define FTDI_SIO_SET_DTR_HIGH ((FTDI_SIO_SET_DTR_MASK << 8) | 1) +#define FTDI_SIO_SET_DTR_LOW ((FTDI_SIO_SET_DTR_MASK << 8) | 0) #define FTDI_SIO_SET_RTS_MASK 0x2 -#define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8)) -#define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8)) +#define FTDI_SIO_SET_RTS_HIGH ((FTDI_SIO_SET_RTS_MASK << 8) | 2) +#define FTDI_SIO_SET_RTS_LOW ((FTDI_SIO_SET_RTS_MASK << 8) | 0) /* * ControlValue diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index db591d19d416..97cabf803c2f 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -237,10 +237,10 @@ static inline int getDataLength(const __u8 *usbPacket) */ static inline int isAbortTrfCmnd(const unsigned char *buf) { - if (0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ, - sizeof(GARMIN_STOP_TRANSFER_REQ)) || - 0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2, - sizeof(GARMIN_STOP_TRANSFER_REQ_V2))) + if (memcmp(buf, GARMIN_STOP_TRANSFER_REQ, + sizeof(GARMIN_STOP_TRANSFER_REQ)) == 0 || + memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2, + sizeof(GARMIN_STOP_TRANSFER_REQ_V2)) == 0) return 1; else return 0; @@ -350,7 +350,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id) unsigned l = 0; dev_dbg(&garmin_data_p->port->dev, "%s - pkt-id: 0x%X.\n", __func__, - 0xFF & pkt_id); + pkt_id); *ptr++ = DLE; *ptr++ = ACK; @@ -366,7 +366,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id) *ptr++ = DLE; *ptr++ = 0; - *ptr++ = 0xFF & (-cksum); + *ptr++ = (-cksum) & 0xFF; *ptr++ = DLE; *ptr++ = ETX; @@ -423,9 +423,9 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) n++; } - if ((0xff & (cksum + *recpkt)) != 0) { + if (((cksum + *recpkt) & 0xff) != 0) { dev_dbg(dev, "%s - invalid checksum, expected %02x, got %02x\n", - __func__, 0xff & -cksum, 0xff & *recpkt); + __func__, -cksum & 0xff, *recpkt); return -EINVPKT; } @@ -528,7 +528,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p, dev_dbg(dev, "NAK packet complete.\n"); } else { dev_dbg(dev, "packet complete - id=0x%X.\n", - 0xFF & data); + data); gsp_rec_packet(garmin_data_p, size); } @@ -636,7 +636,7 @@ static int gsp_send(struct garmin_data *garmin_data_p, garmin_data_p->outsize = 0; - if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) { + if (getLayerId(garmin_data_p->outbuffer) != GARMIN_LAYERID_APPL) { dev_dbg(dev, "not an application packet (%d)\n", getLayerId(garmin_data_p->outbuffer)); return -1; @@ -688,7 +688,7 @@ static int gsp_send(struct garmin_data *garmin_data_p, *dst++ = DLE; } - cksum = 0xFF & -cksum; + cksum = -cksum & 0xFF; *dst++ = cksum; if (cksum == DLE) *dst++ = DLE; @@ -860,7 +860,6 @@ static int process_resetdev_request(struct usb_serial_port *port) static int garmin_clear(struct garmin_data *garmin_data_p) { unsigned long flags; - int status = 0; /* flush all queued data */ pkt_clear(garmin_data_p); @@ -870,7 +869,7 @@ static int garmin_clear(struct garmin_data *garmin_data_p) garmin_data_p->outsize = 0; spin_unlock_irqrestore(&garmin_data_p->lock, flags); - return status; + return 0; } @@ -970,7 +969,7 @@ static void garmin_write_bulk_callback(struct urb *urb) struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)) { + if (getLayerId(urb->transfer_buffer) == GARMIN_LAYERID_APPL) { if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { gsp_send_ack(garmin_data_p, @@ -1025,7 +1024,7 @@ static int garmin_write_bulk(struct usb_serial_port *port, dismiss_ack ? NULL : port); urb->transfer_flags |= URB_ZERO_PACKET; - if (GARMIN_LAYERID_APPL == getLayerId(buffer)) { + if (getLayerId(buffer) == GARMIN_LAYERID_APPL) { spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= APP_REQ_SEEN; @@ -1077,9 +1076,9 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port, pktsiz = getDataLength(garmin_data_p->privpkt); pktid = getPacketId(garmin_data_p->privpkt); - if (count == (GARMIN_PKTHDR_LENGTH+pktsiz) - && GARMIN_LAYERID_PRIVATE == - getLayerId(garmin_data_p->privpkt)) { + if (count == (GARMIN_PKTHDR_LENGTH + pktsiz) && + getLayerId(garmin_data_p->privpkt) == + GARMIN_LAYERID_PRIVATE) { dev_dbg(dev, "%s - processing private request %d\n", __func__, pktid); @@ -1192,7 +1191,7 @@ static void garmin_read_bulk_callback(struct urb *urb) garmin_read_process(garmin_data_p, data, urb->actual_length, 1); if (urb->actual_length == 0 && - 0 != (garmin_data_p->flags & FLAGS_BULK_IN_RESTART)) { + (garmin_data_p->flags & FLAGS_BULK_IN_RESTART) != 0) { spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags &= ~FLAGS_BULK_IN_RESTART; spin_unlock_irqrestore(&garmin_data_p->lock, flags); @@ -1203,7 +1202,7 @@ static void garmin_read_bulk_callback(struct urb *urb) __func__, retval); } else if (urb->actual_length > 0) { /* Continue trying to read until nothing more is received */ - if (0 == (garmin_data_p->flags & FLAGS_THROTTLED)) { + if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) { retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (retval) dev_err(&port->dev, @@ -1249,12 +1248,12 @@ static void garmin_read_int_callback(struct urb *urb) urb->transfer_buffer); if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) && - 0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY, - sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) { + memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY, + sizeof(GARMIN_BULK_IN_AVAIL_REPLY)) == 0) { dev_dbg(&port->dev, "%s - bulk data available.\n", __func__); - if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) { + if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) == 0) { /* bulk data available */ retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); @@ -1276,8 +1275,8 @@ static void garmin_read_int_callback(struct urb *urb) } } else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY)) - && 0 == memcmp(data, GARMIN_START_SESSION_REPLY, - sizeof(GARMIN_START_SESSION_REPLY))) { + && memcmp(data, GARMIN_START_SESSION_REPLY, + sizeof(GARMIN_START_SESSION_REPLY)) == 0) { spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN; @@ -1356,7 +1355,7 @@ static void garmin_unthrottle(struct tty_struct *tty) if (garmin_data_p->mode == MODE_NATIVE) garmin_flush_queue(garmin_data_p); - if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) { + if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) != 0) { status = usb_submit_urb(port->read_urb, GFP_KERNEL); if (status) dev_err(&port->dev, diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 5ad4a0fb4b26..344b4eea4bd5 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -360,7 +360,7 @@ static void iuu_led_activity_on(struct urb *urb) int result; char *buf_ptr = port->write_urb->transfer_buffer; *buf_ptr++ = IUU_SET_LED; - if (xmas == 1) { + if (xmas) { get_random_bytes(buf_ptr, 6); *(buf_ptr+7) = 1; } else { @@ -380,7 +380,7 @@ static void iuu_led_activity_off(struct urb *urb) struct usb_serial_port *port = urb->context; int result; char *buf_ptr = port->write_urb->transfer_buffer; - if (xmas == 1) { + if (xmas) { iuu_rxcmd(urb); return; } else { diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index e07b15ed5814..b6bd8e4a6486 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1963,7 +1963,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, if (d_details->product_id == keyspan_usa49wg_product_id) { dr = (void *)(s_priv->ctrl_buf); dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT; - dr->bRequest = 0xB0; /* 49wg control message */; + dr->bRequest = 0xB0; /* 49wg control message */ dr->wValue = 0; dr->wIndex = 0; dr->wLength = cpu_to_le16(sizeof(msg)); diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index e020ad28a00c..fc5d3a791e08 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -472,7 +472,6 @@ static void klsi_105_set_termios(struct tty_struct *tty, /* maybe this should be simulated by sending read * disable and read enable messages? */ - ; #if 0 priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); mct_u232_set_modem_ctrl(serial, priv->control_state); @@ -527,7 +526,6 @@ static void klsi_105_set_termios(struct tty_struct *tty, mct_u232_set_line_ctrl(serial, priv->last_lcr); #endif - ; } /* * Set flow control: well, I do not really now how to handle DTR/RTS. @@ -546,7 +544,6 @@ static void klsi_105_set_termios(struct tty_struct *tty, priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); mct_u232_set_modem_ctrl(serial, priv->control_state); #endif - ; } memcpy(cfg, &priv->cfg, sizeof(*cfg)); spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 02ea975754f5..ed378fb232e7 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1842,7 +1842,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty, Data = 0x0c; mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - if (mos7840_port->read_urb_busy == false) { + if (!mos7840_port->read_urb_busy) { mos7840_port->read_urb_busy = true; status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); if (status) { @@ -1906,7 +1906,7 @@ static void mos7840_set_termios(struct tty_struct *tty, return; } - if (mos7840_port->read_urb_busy == false) { + if (!mos7840_port->read_urb_busy) { mos7840_port->read_urb_busy = true; status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); if (status) { diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 504f5bff79c0..2df8ad5ede89 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -973,7 +973,7 @@ static int qt2_write(struct tty_struct *tty, data = write_urb->transfer_buffer; spin_lock_irqsave(&port_priv->urb_lock, flags); - if (port_priv->urb_in_use == true) { + if (port_priv->urb_in_use) { dev_err(&port->dev, "qt2_write - urb is in use\n"); goto write_out; } diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index b2dff0f14743..93c6c9b08daa 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -76,13 +76,8 @@ #include <linux/usb.h> #include <linux/usb/serial.h> - -#ifndef CONFIG_USB_SERIAL_SAFE_PADDED -#define CONFIG_USB_SERIAL_SAFE_PADDED 0 -#endif - -static bool safe = 1; -static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED; +static bool safe = true; +static bool padded = IS_ENABLED(CONFIG_USB_SERIAL_SAFE_PADDED); #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "USB Safe Encapsulated Serial" @@ -278,7 +273,7 @@ static int safe_startup(struct usb_serial *serial) case LINEO_SAFESERIAL_CRC: break; case LINEO_SAFESERIAL_CRC_PADDED: - padded = 1; + padded = true; break; default: return -EINVAL; |