diff options
Diffstat (limited to 'drivers/usb/storage/shuttle_usbat.c')
| -rw-r--r-- | drivers/usb/storage/shuttle_usbat.c | 202 |
1 files changed, 181 insertions, 21 deletions
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index ae6d64810d2a..b62a28814ebe 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -42,6 +42,7 @@ */ #include <linux/errno.h> +#include <linux/module.h> #include <linux/slab.h> #include <linux/cdrom.h> @@ -52,7 +53,100 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "shuttle_usbat.h" + +MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable"); +MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>"); +MODULE_LICENSE("GPL"); + +/* Supported device types */ +#define USBAT_DEV_HP8200 0x01 +#define USBAT_DEV_FLASH 0x02 + +#define USBAT_EPP_PORT 0x10 +#define USBAT_EPP_REGISTER 0x30 +#define USBAT_ATA 0x40 +#define USBAT_ISA 0x50 + +/* Commands (need to be logically OR'd with an access type */ +#define USBAT_CMD_READ_REG 0x00 +#define USBAT_CMD_WRITE_REG 0x01 +#define USBAT_CMD_READ_BLOCK 0x02 +#define USBAT_CMD_WRITE_BLOCK 0x03 +#define USBAT_CMD_COND_READ_BLOCK 0x04 +#define USBAT_CMD_COND_WRITE_BLOCK 0x05 +#define USBAT_CMD_WRITE_REGS 0x07 + +/* Commands (these don't need an access type) */ +#define USBAT_CMD_EXEC_CMD 0x80 +#define USBAT_CMD_SET_FEAT 0x81 +#define USBAT_CMD_UIO 0x82 + +/* Methods of accessing UIO register */ +#define USBAT_UIO_READ 1 +#define USBAT_UIO_WRITE 0 + +/* Qualifier bits */ +#define USBAT_QUAL_FCQ 0x20 /* full compare */ +#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */ + +/* USBAT Flash Media status types */ +#define USBAT_FLASH_MEDIA_NONE 0 +#define USBAT_FLASH_MEDIA_CF 1 + +/* USBAT Flash Media change types */ +#define USBAT_FLASH_MEDIA_SAME 0 +#define USBAT_FLASH_MEDIA_CHANGED 1 + +/* USBAT ATA registers */ +#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */ +#define USBAT_ATA_FEATURES 0x11 /* set features (W) */ +#define USBAT_ATA_ERROR 0x11 /* error (R) */ +#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */ +#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */ +#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */ +#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */ +#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */ +#define USBAT_ATA_STATUS 0x17 /* device status (R) */ +#define USBAT_ATA_CMD 0x17 /* device command (W) */ +#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */ + +/* USBAT User I/O Data registers */ +#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */ +#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */ + /* CDT = ACKD & !UI1 & !UI0 */ +#define USBAT_UIO_1 0x20 /* I/O 1 */ +#define USBAT_UIO_0 0x10 /* I/O 0 */ +#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */ +#define USBAT_UIO_UI1 0x04 /* Input 1 */ +#define USBAT_UIO_UI0 0x02 /* Input 0 */ +#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */ + +/* USBAT User I/O Enable registers */ +#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */ +#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */ +#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */ + /* If ACKD=1, set OE1 to 1 also. */ +#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */ +#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */ + +/* USBAT Features */ +#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */ +#define USBAT_FEAT_U1 0x08 +#define USBAT_FEAT_U0 0x04 +#define USBAT_FEAT_ET1 0x02 +#define USBAT_FEAT_ET2 0x01 + +struct usbat_info { + int devicetype; + + /* Used for Flash readers only */ + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ + + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; #define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) ) #define LSB_of(s) ((s)&0xFF) @@ -63,6 +157,48 @@ static int transferred = 0; static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us); static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us); +static int init_usbat_cd(struct us_data *us); +static int init_usbat_flash(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id usbat_usb_ids[] = { +# include "unusual_usbat.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, usbat_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev usbat_unusual_dev_list[] = { +# include "unusual_usbat.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + /* * Convenience function to produce an ATA read/write sectors command * Use cmd=0x20 for read, cmd=0x30 for write @@ -1684,37 +1820,61 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) return USB_STOR_TRANSPORT_FAILED; } -int init_usbat_cd(struct us_data *us) +static int init_usbat_cd(struct us_data *us) { return init_usbat(us, USBAT_DEV_HP8200); } - -int init_usbat_flash(struct us_data *us) +static int init_usbat_flash(struct us_data *us) { return init_usbat(us, USBAT_DEV_FLASH); } -int init_usbat_probe(struct us_data *us) +static int usbat_probe(struct usb_interface *intf, + const struct usb_device_id *id) { - return init_usbat(us, 0); + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - usbat_usb_ids) + usbat_unusual_dev_list); + if (result) + return result; + + /* The actual transport will be determined later by the + * initialization routine; this is just a placeholder. + */ + us->transport_name = "Shuttle USBAT"; + us->transport = usbat_flash_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; } -/* - * Default transport function. Attempts to detect which transport function - * should be called, makes it the new default, and calls it. - * - * This function should never be called. Our usbat_init() function detects the - * device type and changes the us->transport ptr to the transport function - * relevant to the device. - * However, we'll support this impossible(?) case anyway. - */ -int usbat_transport(struct scsi_cmnd *srb, struct us_data *us) +static struct usb_driver usbat_driver = { + .name = "ums-usbat", + .probe = usbat_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = usbat_usb_ids, + .soft_unbind = 1, +}; + +static int __init usbat_init(void) { - struct usbat_info *info = (struct usbat_info*) (us->extra); - - if (usbat_set_transport(us, info, 0)) - return USB_STOR_TRANSPORT_ERROR; + return usb_register(&usbat_driver); +} - return us->transport(srb, us); +static void __exit usbat_exit(void) +{ + usb_deregister(&usbat_driver); } + +module_init(usbat_init); +module_exit(usbat_exit); |