diff options
Diffstat (limited to 'drivers/usb/storage')
39 files changed, 2024 insertions, 1084 deletions
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 9df6887b91f6..8a372bac0e43 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -2,8 +2,8 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;" -comment "see USB_STORAGE Help for more information" +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" +comment "also be needed; see USB_STORAGE Help for more info" depends on USB config USB_STORAGE @@ -32,21 +32,25 @@ config USB_STORAGE_DEBUG verbose debugging messages. config USB_STORAGE_DATAFAB - bool "Datafab Compact Flash Reader support" + tristate "Datafab Compact Flash Reader support" depends on USB_STORAGE help Support for certain Datafab CompactFlash readers. Datafab has a web page at <http://www.datafabusa.com/>. + If this driver is compiled as a module, it will be named ums-datafab. + config USB_STORAGE_FREECOM - bool "Freecom USB/ATAPI Bridge support" + tristate "Freecom USB/ATAPI Bridge support" depends on USB_STORAGE help Support for the Freecom USB to IDE/ATAPI adaptor. Freecom has a web page at <http://www.freecom.de/>. + If this driver is compiled as a module, it will be named ums-freecom. + config USB_STORAGE_ISD200 - bool "ISD-200 USB/ATA Bridge support" + tristate "ISD-200 USB/ATA Bridge support" depends on USB_STORAGE ---help--- Say Y here if you want to use USB Mass Store devices based @@ -61,8 +65,10 @@ config USB_STORAGE_ISD200 - CyQ've CQ8060A CDRW drive - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) + If this driver is compiled as a module, it will be named ums-isd200. + config USB_STORAGE_USBAT - bool "USBAT/USBAT02-based storage support" + tristate "USBAT/USBAT02-based storage support" depends on USB_STORAGE help Say Y here to include additional code to support storage devices @@ -82,30 +88,38 @@ config USB_STORAGE_USBAT - RCA LYRA MP3 portable - Sandisk ImageMate SDDR-05b + If this driver is compiled as a module, it will be named ums-usbat. + config USB_STORAGE_SDDR09 - bool "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" + tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" depends on USB_STORAGE help Say Y here to include additional code to support the Sandisk SDDR-09 SmartMedia reader in the USB Mass Storage driver. Also works for the Microtech Zio! CompactFlash/SmartMedia reader. + If this driver is compiled as a module, it will be named ums-sddr09. + config USB_STORAGE_SDDR55 - bool "SanDisk SDDR-55 SmartMedia support" + tristate "SanDisk SDDR-55 SmartMedia support" depends on USB_STORAGE help Say Y here to include additional code to support the Sandisk SDDR-55 SmartMedia reader in the USB Mass Storage driver. + If this driver is compiled as a module, it will be named ums-sddr55. + config USB_STORAGE_JUMPSHOT - bool "Lexar Jumpshot Compact Flash Reader" + tristate "Lexar Jumpshot Compact Flash Reader" depends on USB_STORAGE help Say Y here to include additional code to support the Lexar Jumpshot USB CompactFlash reader. + If this driver is compiled as a module, it will be named ums-jumpshot. + config USB_STORAGE_ALAUDA - bool "Olympus MAUSB-10/Fuji DPC-R1 support" + tristate "Olympus MAUSB-10/Fuji DPC-R1 support" depends on USB_STORAGE help Say Y here to include additional code to support the Olympus MAUSB-10 @@ -114,8 +128,10 @@ config USB_STORAGE_ALAUDA These devices are based on the Alauda chip and support both XD and SmartMedia cards. + If this driver is compiled as a module, it will be named ums-alauda. + config USB_STORAGE_ONETOUCH - bool "Support OneTouch Button on Maxtor Hard Drives" + tristate "Support OneTouch Button on Maxtor Hard Drives" depends on USB_STORAGE depends on INPUT=y || INPUT=USB_STORAGE help @@ -127,8 +143,10 @@ config USB_STORAGE_ONETOUCH this input in any keybinding software. (e.g. gnome's keyboard short- cuts) + If this driver is compiled as a module, it will be named ums-onetouch. + config USB_STORAGE_KARMA - bool "Support for Rio Karma music player" + tristate "Support for Rio Karma music player" depends on USB_STORAGE help Say Y here to include additional code to support the Rio Karma @@ -139,8 +157,10 @@ config USB_STORAGE_KARMA on the resulting scsi device node returns the Karma to normal operation. + If this driver is compiled as a module, it will be named ums-karma. + config USB_STORAGE_CYPRESS_ATACB - bool "SAT emulation on Cypress USB/ATA Bridge with ATACB" + tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" depends on USB_STORAGE ---help--- Say Y here if you want to use SAT (ata pass through) on devices based @@ -150,6 +170,8 @@ config USB_STORAGE_CYPRESS_ATACB If you say no here your device will still work with the standard usb mass storage class. + If this driver is compiled as a module, it will be named ums-cypress. + config USB_LIBUSUAL bool "The shared table of common (or usual) storage devices" depends on USB diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index b32069313390..5be54c019662 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -10,21 +10,36 @@ EXTRA_CFLAGS := -Idrivers/scsi obj-$(CONFIG_USB_STORAGE) += usb-storage.o usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o -usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT) += shuttle_usbat.o -usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09) += sddr09.o -usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55) += sddr55.o -usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM) += freecom.o -usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o -usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o -usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o -usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o -usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o -usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o -usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y) -ifneq ($(CONFIG_USB_LIBUSUAL),) - obj-$(CONFIG_USB) += libusual.o +ifeq ($(CONFIG_USB_LIBUSUAL),) + usb-storage-objs += usual-tables.o +else + obj-$(CONFIG_USB) += libusual.o usual-tables.o endif + +obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o +obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o +obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o +obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o +obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o +obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += ums-jumpshot.o +obj-$(CONFIG_USB_STORAGE_KARMA) += ums-karma.o +obj-$(CONFIG_USB_STORAGE_ONETOUCH) += ums-onetouch.o +obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o +obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o +obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o + +ums-alauda-objs := alauda.o +ums-cypress-objs := cypress_atacb.o +ums-datafab-objs := datafab.o +ums-freecom-objs := freecom.o +ums-isd200-objs := isd200.o +ums-jumpshot-objs := jumpshot.o +ums-karma-objs := karma.o +ums-onetouch-objs := onetouch.o +ums-sddr09-objs := sddr09.o +ums-sddr55-objs := sddr55.o +ums-usbat-objs := shuttle_usbat.o diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index 8d3711a7ff06..67edc65acb8e 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -31,6 +31,8 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/module.h> + #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_device.h> @@ -39,7 +41,79 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "alauda.h" + +MODULE_DESCRIPTION("Driver for Alauda-based card readers"); +MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>"); +MODULE_LICENSE("GPL"); + +/* + * Status bytes + */ +#define ALAUDA_STATUS_ERROR 0x01 +#define ALAUDA_STATUS_READY 0x40 + +/* + * Control opcodes (for request field) + */ +#define ALAUDA_GET_XD_MEDIA_STATUS 0x08 +#define ALAUDA_GET_SM_MEDIA_STATUS 0x98 +#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a +#define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a +#define ALAUDA_GET_XD_MEDIA_SIG 0x86 +#define ALAUDA_GET_SM_MEDIA_SIG 0x96 + +/* + * Bulk command identity (byte 0) + */ +#define ALAUDA_BULK_CMD 0x40 + +/* + * Bulk opcodes (byte 1) + */ +#define ALAUDA_BULK_GET_REDU_DATA 0x85 +#define ALAUDA_BULK_READ_BLOCK 0x94 +#define ALAUDA_BULK_ERASE_BLOCK 0xa3 +#define ALAUDA_BULK_WRITE_BLOCK 0xb4 +#define ALAUDA_BULK_GET_STATUS2 0xb7 +#define ALAUDA_BULK_RESET_MEDIA 0xe0 + +/* + * Port to operate on (byte 8) + */ +#define ALAUDA_PORT_XD 0x00 +#define ALAUDA_PORT_SM 0x01 + +/* + * LBA and PBA are unsigned ints. Special values. + */ +#define UNDEF 0xffff +#define SPARE 0xfffe +#define UNUSABLE 0xfffd + +struct alauda_media_info { + unsigned long capacity; /* total media size in bytes */ + unsigned int pagesize; /* page size in bytes */ + unsigned int blocksize; /* number of pages per block */ + unsigned int uzonesize; /* number of usable blocks per zone */ + unsigned int zonesize; /* number of blocks per zone */ + unsigned int blockmask; /* mask to get page from address */ + + unsigned char pageshift; + unsigned char blockshift; + unsigned char zoneshift; + + u16 **lba_to_pba; /* logical to physical block map */ + u16 **pba_to_lba; /* physical to logical block map */ +}; + +struct alauda_info { + struct alauda_media_info port[2]; + int wr_ep; /* endpoint to write data out of */ + + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) #define LSB_of(s) ((s)&0xFF) @@ -52,6 +126,48 @@ #define PBA_HI(pba) (pba >> 3) #define PBA_ZONE(pba) (pba >> 11) +static int init_alauda(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id alauda_usb_ids[] = { +# include "unusual_alauda.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, alauda_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev alauda_unusual_dev_list[] = { +# include "unusual_alauda.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + /* * Media handling */ @@ -307,7 +423,8 @@ static int alauda_init_media(struct us_data *us) data[0], data[1], data[2], data[3]); media_info = alauda_card_find_id(data[1]); if (media_info == NULL) { - printk("alauda_init_media: Unrecognised media signature: " + printk(KERN_WARNING + "alauda_init_media: Unrecognised media signature: " "%02X %02X %02X %02X\n", data[0], data[1], data[2], data[3]); return USB_STOR_TRANSPORT_ERROR; @@ -518,7 +635,8 @@ static int alauda_read_map(struct us_data *us, unsigned int zone) /* check even parity */ if (parity[data[6] ^ data[7]]) { - printk("alauda_read_map: Bad parity in LBA for block %d" + printk(KERN_WARNING + "alauda_read_map: Bad parity in LBA for block %d" " (%02X %02X)\n", i, data[6], data[7]); pba_to_lba[i] = UNUSABLE; continue; @@ -538,13 +656,16 @@ static int alauda_read_map(struct us_data *us, unsigned int zone) */ if (lba_offset >= uzonesize) { - printk("alauda_read_map: Bad low LBA %d for block %d\n", + printk(KERN_WARNING + "alauda_read_map: Bad low LBA %d for block %d\n", lba_real, blocknum); continue; } if (lba_to_pba[lba_offset] != UNDEF) { - printk("alauda_read_map: LBA %d seen for PBA %d and %d\n", + printk(KERN_WARNING + "alauda_read_map: " + "LBA %d seen for PBA %d and %d\n", lba_real, lba_to_pba[lba_offset], blocknum); continue; } @@ -712,13 +833,15 @@ static int alauda_write_lba(struct us_data *us, u16 lba, if (pba == 1) { /* Maybe it is impossible to write to PBA 1. Fake success, but don't do anything. */ - printk("alauda_write_lba: avoid writing to pba 1\n"); + printk(KERN_WARNING + "alauda_write_lba: avoid writing to pba 1\n"); return USB_STOR_TRANSPORT_GOOD; } new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone); if (!new_pba) { - printk("alauda_write_lba: Out of unused blocks\n"); + printk(KERN_WARNING + "alauda_write_lba: Out of unused blocks\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -818,7 +941,7 @@ static int alauda_read_data(struct us_data *us, unsigned long address, len = min(sectors, blocksize) * (pagesize + 64); buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) { - printk("alauda_read_data: Out of memory\n"); + printk(KERN_WARNING "alauda_read_data: Out of memory\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -911,7 +1034,7 @@ static int alauda_write_data(struct us_data *us, unsigned long address, len = min(sectors, blocksize) * pagesize; buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) { - printk("alauda_write_data: Out of memory\n"); + printk(KERN_WARNING "alauda_write_data: Out of memory\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -921,7 +1044,7 @@ static int alauda_write_data(struct us_data *us, unsigned long address, */ blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO); if (blockbuffer == NULL) { - printk("alauda_write_data: Out of memory\n"); + printk(KERN_WARNING "alauda_write_data: Out of memory\n"); kfree(buffer); return USB_STOR_TRANSPORT_ERROR; } @@ -991,7 +1114,7 @@ static void alauda_info_destructor(void *extra) /* * Initialize alauda_info struct and find the data-write endpoint */ -int init_alauda(struct us_data *us) +static int init_alauda(struct us_data *us) { struct alauda_info *info; struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting; @@ -1013,7 +1136,7 @@ int init_alauda(struct us_data *us) return USB_STOR_TRANSPORT_GOOD; } -int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) +static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) { int rc; struct alauda_info *info = (struct alauda_info *) us->extra; @@ -1121,3 +1244,48 @@ int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_FAILED; } +static int alauda_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - alauda_usb_ids) + alauda_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Alauda Control/Bulk"; + us->transport = alauda_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver alauda_driver = { + .name = "ums-alauda", + .probe = alauda_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = alauda_usb_ids, + .soft_unbind = 1, +}; + +static int __init alauda_init(void) +{ + return usb_register(&alauda_driver); +} + +static void __exit alauda_exit(void) +{ + usb_deregister(&alauda_driver); +} + +module_init(alauda_init); +module_exit(alauda_exit); diff --git a/drivers/usb/storage/alauda.h b/drivers/usb/storage/alauda.h deleted file mode 100644 index a700f87d0803..000000000000 --- a/drivers/usb/storage/alauda.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Driver for Alauda-based card readers - * - * Current development and maintenance by: - * (c) 2005 Daniel Drake <dsd@gentoo.org> - * - * See alauda.c for more explanation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_ALAUDA_H -#define _USB_ALAUDA_H - -/* - * Status bytes - */ -#define ALAUDA_STATUS_ERROR 0x01 -#define ALAUDA_STATUS_READY 0x40 - -/* - * Control opcodes (for request field) - */ -#define ALAUDA_GET_XD_MEDIA_STATUS 0x08 -#define ALAUDA_GET_SM_MEDIA_STATUS 0x98 -#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a -#define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a -#define ALAUDA_GET_XD_MEDIA_SIG 0x86 -#define ALAUDA_GET_SM_MEDIA_SIG 0x96 - -/* - * Bulk command identity (byte 0) - */ -#define ALAUDA_BULK_CMD 0x40 - -/* - * Bulk opcodes (byte 1) - */ -#define ALAUDA_BULK_GET_REDU_DATA 0x85 -#define ALAUDA_BULK_READ_BLOCK 0x94 -#define ALAUDA_BULK_ERASE_BLOCK 0xa3 -#define ALAUDA_BULK_WRITE_BLOCK 0xb4 -#define ALAUDA_BULK_GET_STATUS2 0xb7 -#define ALAUDA_BULK_RESET_MEDIA 0xe0 - -/* - * Port to operate on (byte 8) - */ -#define ALAUDA_PORT_XD 0x00 -#define ALAUDA_PORT_SM 0x01 - -/* - * LBA and PBA are unsigned ints. Special values. - */ -#define UNDEF 0xffff -#define SPARE 0xfffe -#define UNUSABLE 0xfffd - -int init_alauda(struct us_data *us); -int alauda_transport(struct scsi_cmnd *srb, struct us_data *us); - -struct alauda_media_info { - unsigned long capacity; /* total media size in bytes */ - unsigned int pagesize; /* page size in bytes */ - unsigned int blocksize; /* number of pages per block */ - unsigned int uzonesize; /* number of usable blocks per zone */ - unsigned int zonesize; /* number of blocks per zone */ - unsigned int blockmask; /* mask to get page from address */ - - unsigned char pageshift; - unsigned char blockshift; - unsigned char zoneshift; - - u16 **lba_to_pba; /* logical to physical block map */ - u16 **pba_to_lba; /* physical to logical block map */ -}; - -struct alauda_info { - struct alauda_media_info port[2]; - int wr_ep; /* endpoint to write data out of */ - - unsigned char sense_key; - unsigned long sense_asc; /* additional sense code */ - unsigned long sense_ascq; /* additional sense code qualifier */ -}; - -#endif - diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 898e67d30e56..c84471821183 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -19,6 +19,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/module.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_eh.h> @@ -29,6 +30,49 @@ #include "scsiglue.h" #include "debug.h" +MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB"); +MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>"); +MODULE_LICENSE("GPL"); + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id cypress_usb_ids[] = { +# include "unusual_cypress.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, cypress_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev cypress_unusual_dev_list[] = { +# include "unusual_cypress.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + /* * ATACB is a protocol used on cypress usb<->ata bridge to * send raw ATA command over mass storage @@ -36,7 +80,7 @@ * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf * datasheet from cypress.com. */ -void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) +static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) { unsigned char save_cmnd[MAX_COMMAND_SIZE]; @@ -133,19 +177,18 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) /* build the command for * reading the ATA registers */ - scsi_eh_prep_cmnd(srb, &ses, NULL, 0, 0); - srb->sdb.length = sizeof(regs); - sg_init_one(&ses.sense_sgl, regs, srb->sdb.length); - srb->sdb.table.sgl = &ses.sense_sgl; - srb->sc_data_direction = DMA_FROM_DEVICE; - srb->sdb.table.nents = 1; + scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs)); + /* we use the same command as before, but we set * the read taskfile bit, for not executing atacb command, * but reading register selected in srb->cmnd[4] */ + srb->cmd_len = 16; + srb->cmnd = ses.cmnd; srb->cmnd[2] = 1; usb_stor_transparent_scsi_command(srb, us); + memcpy(regs, srb->sense_buffer, sizeof(regs)); tmp_result = srb->result; scsi_eh_restore_cmnd(srb, &ses); /* we fail to get registers, report invalid command */ @@ -162,8 +205,8 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) /* XXX we should generate sk, asc, ascq from status and error * regs - * (see 11.1 Error translation ATA device error to SCSI error map) - * and ata_to_sense_error from libata. + * (see 11.1 Error translation ATA device error to SCSI error + * map, and ata_to_sense_error from libata.) */ /* Sense data is current and format is descriptor. */ @@ -198,3 +241,48 @@ end: if (srb->cmnd[0] == ATA_12) srb->cmd_len = 12; } + + +static int cypress_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - cypress_usb_ids) + cypress_unusual_dev_list); + if (result) + return result; + + us->protocol_name = "Transparent SCSI with Cypress ATACB"; + us->proto_handler = cypress_atacb_passthrough; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver cypress_driver = { + .name = "ums-cypress", + .probe = cypress_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = cypress_usb_ids, + .soft_unbind = 1, +}; + +static int __init cypress_init(void) +{ + return usb_register(&cypress_driver); +} + +static void __exit cypress_exit(void) +{ + usb_deregister(&cypress_driver); +} + +module_init(cypress_init); +module_exit(cypress_exit); diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c index 17f1ae232919..2b6e565262c2 100644 --- a/drivers/usb/storage/datafab.c +++ b/drivers/usb/storage/datafab.c @@ -49,6 +49,7 @@ */ #include <linux/errno.h> +#include <linux/module.h> #include <linux/slab.h> #include <scsi/scsi.h> @@ -58,12 +59,65 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "datafab.h" + +MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader"); +MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>"); +MODULE_LICENSE("GPL"); + +struct datafab_info { + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ + signed char lun; /* used for dual-slot readers */ + + /* the following aren't used yet */ + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; static int datafab_determine_lun(struct us_data *us, struct datafab_info *info); +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id datafab_usb_ids[] = { +# include "unusual_datafab.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, datafab_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev datafab_unusual_dev_list[] = { +# include "unusual_datafab.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + static inline int datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) { if (len == 0) @@ -500,7 +554,7 @@ static void datafab_info_destructor(void *extra) // Transport for the Datafab MDCFE-B // -int datafab_transport(struct scsi_cmnd * srb, struct us_data *us) +static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) { struct datafab_info *info; int rc; @@ -665,3 +719,49 @@ int datafab_transport(struct scsi_cmnd * srb, struct us_data *us) info->sense_ascq = 0x00; return USB_STOR_TRANSPORT_FAILED; } + +static int datafab_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - datafab_usb_ids) + datafab_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Datafab Bulk-Only"; + us->transport = datafab_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver datafab_driver = { + .name = "ums-datafab", + .probe = datafab_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = datafab_usb_ids, + .soft_unbind = 1, +}; + +static int __init datafab_init(void) +{ + return usb_register(&datafab_driver); +} + +static void __exit datafab_exit(void) +{ + usb_deregister(&datafab_driver); +} + +module_init(datafab_init); +module_exit(datafab_exit); diff --git a/drivers/usb/storage/datafab.h b/drivers/usb/storage/datafab.h deleted file mode 100644 index 32e3f271e582..000000000000 --- a/drivers/usb/storage/datafab.h +++ /dev/null @@ -1,40 +0,0 @@ -/* Driver for Datafab MDCFE-B USB Compact Flash reader - * Header File - * - * Current development and maintenance by: - * (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org) - * - * See datafab.c for more explanation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_DATAFAB_MDCFE_B_H -#define _USB_DATAFAB_MDCFE_B_H - -extern int datafab_transport(struct scsi_cmnd *srb, struct us_data *us); - -struct datafab_info { - unsigned long sectors; // total sector count - unsigned long ssize; // sector size in bytes - signed char lun; // used for dual-slot readers - - // the following aren't used yet - unsigned char sense_key; - unsigned long sense_asc; // additional sense code - unsigned long sense_ascq; // additional sense code qualifier -}; - -#endif diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index 73ac7262239e..54cc94277acb 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -26,6 +26,7 @@ * (http://www.freecom.de/) */ +#include <linux/module.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -33,7 +34,10 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "freecom.h" + +MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor"); +MODULE_AUTHOR("David Brown <usb-storage@davidb.org>"); +MODULE_LICENSE("GPL"); #ifdef CONFIG_USB_STORAGE_DEBUG static void pdump (void *, int); @@ -103,6 +107,47 @@ struct freecom_status { #define FCM_PACKET_LENGTH 64 #define FCM_STATUS_PACKET_LENGTH 4 +static int init_freecom(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id freecom_usb_ids[] = { +# include "unusual_freecom.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, freecom_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev freecom_unusual_dev_list[] = { +# include "unusual_freecom.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + static int freecom_readdata (struct scsi_cmnd *srb, struct us_data *us, unsigned int ipipe, unsigned int opipe, int count) @@ -173,7 +218,7 @@ freecom_writedata (struct scsi_cmnd *srb, struct us_data *us, * Transport for the Freecom USB/IDE adaptor. * */ -int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) +static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) { struct freecom_cb_wrap *fcb; struct freecom_status *fst; @@ -377,8 +422,7 @@ int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_GOOD; } -int -freecom_init (struct us_data *us) +static int init_freecom(struct us_data *us) { int result; char *buffer = us->iobuf; @@ -417,7 +461,7 @@ freecom_init (struct us_data *us) return USB_STOR_TRANSPORT_GOOD; } -int usb_stor_freecom_reset(struct us_data *us) +static int usb_stor_freecom_reset(struct us_data *us) { printk (KERN_CRIT "freecom reset called\n"); @@ -479,3 +523,48 @@ static void pdump (void *ibuffer, int length) } #endif +static int freecom_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - freecom_usb_ids) + freecom_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Freecom"; + us->transport = freecom_transport; + us->transport_reset = usb_stor_freecom_reset; + us->max_lun = 0; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver freecom_driver = { + .name = "ums-freecom", + .probe = freecom_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = freecom_usb_ids, + .soft_unbind = 1, +}; + +static int __init freecom_init(void) +{ + return usb_register(&freecom_driver); +} + +static void __exit freecom_exit(void) +{ + usb_deregister(&freecom_driver); +} + +module_init(freecom_init); +module_exit(freecom_exit); diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 383abf2516a5..882c57b399f7 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -44,6 +44,7 @@ #include <linux/jiffies.h> #include <linux/errno.h> +#include <linux/module.h> #include <linux/slab.h> #include <linux/hdreg.h> #include <linux/scatterlist.h> @@ -57,7 +58,53 @@ #include "protocol.h" #include "debug.h" #include "scsiglue.h" -#include "isd200.h" + +MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC"); +MODULE_AUTHOR("Björn Stenberg <bjorn@haxx.se>"); +MODULE_LICENSE("GPL"); + +static int isd200_Initialization(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id isd200_usb_ids[] = { +# include "unusual_isd200.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, isd200_usb_ids); + +#undef UNUSUAL_DEV +#undef USUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev isd200_unusual_dev_list[] = { +# include "unusual_isd200.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV +#undef USUAL_DEV /* Timeout defines (in Seconds) */ @@ -1518,7 +1565,7 @@ static int isd200_init_info(struct us_data *us) * Initialization for the ISD200 */ -int isd200_Initialization(struct us_data *us) +static int isd200_Initialization(struct us_data *us) { US_DEBUGP("ISD200 Initialization...\n"); @@ -1549,7 +1596,7 @@ int isd200_Initialization(struct us_data *us) * */ -void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) +static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) { int sendToTransport = 1, orig_bufflen; union ata_cdb ataCdb; @@ -1570,3 +1617,47 @@ void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) isd200_srb_set_bufflen(srb, orig_bufflen); } + +static int isd200_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - isd200_usb_ids) + isd200_unusual_dev_list); + if (result) + return result; + + us->protocol_name = "ISD200 ATA/ATAPI"; + us->proto_handler = isd200_ata_command; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver isd200_driver = { + .name = "ums-isd200", + .probe = isd200_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = isd200_usb_ids, + .soft_unbind = 1, +}; + +static int __init isd200_init(void) +{ + return usb_register(&isd200_driver); +} + +static void __exit isd200_exit(void) +{ + usb_deregister(&isd200_driver); +} + +module_init(isd200_init); +module_exit(isd200_exit); diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c index df67f13c9e73..1c69420e3acf 100644 --- a/drivers/usb/storage/jumpshot.c +++ b/drivers/usb/storage/jumpshot.c @@ -46,6 +46,7 @@ */ #include <linux/errno.h> +#include <linux/module.h> #include <linux/slab.h> #include <scsi/scsi.h> @@ -55,9 +56,61 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "jumpshot.h" +MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader"); +MODULE_AUTHOR("Jimmie Mayfield <mayfield+usb@sackheads.org>"); +MODULE_LICENSE("GPL"); + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id jumpshot_usb_ids[] = { +# include "unusual_jumpshot.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, jumpshot_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev jumpshot_unusual_dev_list[] = { +# include "unusual_jumpshot.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +struct jumpshot_info { + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ + + /* the following aren't used yet */ + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; + static inline int jumpshot_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) @@ -429,7 +482,7 @@ static void jumpshot_info_destructor(void *extra) // Transport for the Lexar 'Jumpshot' // -int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us) +static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) { struct jumpshot_info *info; int rc; @@ -592,3 +645,49 @@ int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us) info->sense_ascq = 0x00; return USB_STOR_TRANSPORT_FAILED; } + +static int jumpshot_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - jumpshot_usb_ids) + jumpshot_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Lexar Jumpshot Control/Bulk"; + us->transport = jumpshot_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver jumpshot_driver = { + .name = "ums-jumpshot", + .probe = jumpshot_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = jumpshot_usb_ids, + .soft_unbind = 1, +}; + +static int __init jumpshot_init(void) +{ + return usb_register(&jumpshot_driver); +} + +static void __exit jumpshot_exit(void) +{ + usb_deregister(&jumpshot_driver); +} + +module_init(jumpshot_init); +module_exit(jumpshot_exit); diff --git a/drivers/usb/storage/jumpshot.h b/drivers/usb/storage/jumpshot.h deleted file mode 100644 index 19bac9d1558f..000000000000 --- a/drivers/usb/storage/jumpshot.h +++ /dev/null @@ -1,39 +0,0 @@ -/* Driver for Lexar "Jumpshot" USB Compact Flash reader - * Header File - * - * Current development and maintenance by: - * (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org) - * - * See jumpshot.c for more explanation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_JUMPSHOT_H -#define _USB_JUMPSHOT_H - -extern int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us); - -struct jumpshot_info { - unsigned long sectors; // total sector count - unsigned long ssize; // sector size in bytes - - // the following aren't used yet - unsigned char sense_key; - unsigned long sense_asc; // additional sense code - unsigned long sense_ascq; // additional sense code qualifier -}; - -#endif diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c index 0d79ae5683f7..7953d93a7739 100644 --- a/drivers/usb/storage/karma.c +++ b/drivers/usb/storage/karma.c @@ -18,6 +18,8 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/module.h> + #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_device.h> @@ -25,7 +27,10 @@ #include "usb.h" #include "transport.h" #include "debug.h" -#include "karma.h" + +MODULE_DESCRIPTION("Driver for Rio Karma"); +MODULE_AUTHOR("Bob Copeland <me@bobcopeland.com>, Keith Bennett <keith@mcs.st-and.ac.uk>"); +MODULE_LICENSE("GPL"); #define RIO_PREFIX "RIOP\x00" #define RIO_PREFIX_LEN 5 @@ -36,13 +41,53 @@ #define RIO_LEAVE_STORAGE 0x2 #define RIO_RESET 0xC -extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data *); - struct karma_data { int in_storage; char *recv; }; +static int rio_karma_init(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id karma_usb_ids[] = { +# include "unusual_karma.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, karma_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev karma_unusual_dev_list[] = { +# include "unusual_karma.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + /* * Send commands to Rio Karma. * @@ -104,7 +149,7 @@ err: * Trap START_STOP and READ_10 to leave/re-enter storage mode. * Everything else is propagated to the normal bulk layer. */ -int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us) +static int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us) { int ret; struct karma_data *data = (struct karma_data *) us->extra; @@ -133,7 +178,7 @@ static void rio_karma_destructor(void *extra) kfree(data->recv); } -int rio_karma_init(struct us_data *us) +static int rio_karma_init(struct us_data *us) { int ret = 0; struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO); @@ -153,3 +198,48 @@ int rio_karma_init(struct us_data *us) out: return ret; } + +static int karma_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - karma_usb_ids) + karma_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Rio Karma/Bulk"; + us->transport = rio_karma_transport; + us->transport_reset = usb_stor_Bulk_reset; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver karma_driver = { + .name = "ums-karma", + .probe = karma_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = karma_usb_ids, + .soft_unbind = 1, +}; + +static int __init karma_init(void) +{ + return usb_register(&karma_driver); +} + +static void __exit karma_exit(void) +{ + usb_deregister(&karma_driver); +} + +module_init(karma_init); +module_exit(karma_exit); diff --git a/drivers/usb/storage/karma.h b/drivers/usb/storage/karma.h deleted file mode 100644 index 8a60972af8c5..000000000000 --- a/drivers/usb/storage/karma.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _KARMA_USB_H -#define _KARMA_USB_H - -extern int rio_karma_init(struct us_data *us); -extern int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us); - -#endif diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c index f970b27ba308..fe3ffe1459b2 100644 --- a/drivers/usb/storage/libusual.c +++ b/drivers/usb/storage/libusual.c @@ -38,37 +38,6 @@ static atomic_t total_threads = ATOMIC_INIT(0); static int usu_probe_thread(void *arg); /* - * The table. - */ -#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ - vendorName, productName,useProtocol, useTransport, \ - initFunction, flags) \ -{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } - -#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ - vendorName, productName, useProtocol, useTransport, \ - initFunction, flags) \ -{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags) } - -#define USUAL_DEV(useProto, useTrans, useType) \ -{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ - .driver_info = ((useType)<<24) } - -struct usb_device_id storage_usb_ids [] = { -# include "unusual_devs.h" - { } /* Terminating entry */ -}; - -#undef USUAL_DEV -#undef UNUSUAL_DEV -#undef COMPLIANT_DEV - -MODULE_DEVICE_TABLE(usb, storage_usb_ids); -EXPORT_SYMBOL_GPL(storage_usb_ids); - -/* * @type: the module type as an integer */ void usb_usual_set_present(int type) @@ -167,7 +136,7 @@ static struct usb_driver usu_driver = { .name = "libusual", .probe = usu_probe, .disconnect = usu_disconnect, - .id_table = storage_usb_ids, + .id_table = usb_storage_usb_ids, }; /* diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index c7bf8954b4e4..380233bd6a39 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -35,9 +35,16 @@ #include <linux/module.h> #include <linux/usb/input.h> #include "usb.h" -#include "onetouch.h" #include "debug.h" +MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver"); +MODULE_AUTHOR("Nick Sillik <n.sillik@temple.edu>"); +MODULE_LICENSE("GPL"); + +#define ONETOUCH_PKT_LEN 0x02 +#define ONETOUCH_BUTTON KEY_PROG1 + +static int onetouch_connect_input(struct us_data *ss); static void onetouch_release_input(void *onetouch_); struct usb_onetouch { @@ -52,6 +59,46 @@ struct usb_onetouch { unsigned int is_open:1; }; + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id onetouch_usb_ids[] = { +# include "unusual_onetouch.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, onetouch_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev onetouch_unusual_dev_list[] = { +# include "unusual_onetouch.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + static void usb_onetouch_irq(struct urb *urb) { struct usb_onetouch *onetouch = urb->context; @@ -127,7 +174,7 @@ static void usb_onetouch_pm_hook(struct us_data *us, int action) } #endif /* CONFIG_PM */ -int onetouch_connect_input(struct us_data *ss) +static int onetouch_connect_input(struct us_data *ss) { struct usb_device *udev = ss->pusb_dev; struct usb_host_interface *interface; @@ -236,3 +283,46 @@ static void onetouch_release_input(void *onetouch_) onetouch->data, onetouch->data_dma); } } + +static int onetouch_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - onetouch_usb_ids) + onetouch_unusual_dev_list); + if (result) + return result; + + /* Use default transport and protocol */ + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver onetouch_driver = { + .name = "ums-onetouch", + .probe = onetouch_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = onetouch_usb_ids, + .soft_unbind = 1, +}; + +static int __init onetouch_init(void) +{ + return usb_register(&onetouch_driver); +} + +static void __exit onetouch_exit(void) +{ + usb_deregister(&onetouch_driver); +} + +module_init(onetouch_init); +module_exit(onetouch_exit); diff --git a/drivers/usb/storage/onetouch.h b/drivers/usb/storage/onetouch.h deleted file mode 100644 index 41c7aa8f0446..000000000000 --- a/drivers/usb/storage/onetouch.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _ONETOUCH_H_ -#define _ONETOUCH_H_ - -#define ONETOUCH_PKT_LEN 0x02 -#define ONETOUCH_BUTTON KEY_PROG1 - -int onetouch_connect_input(struct us_data *ss); - -#endif diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c index be441d84bc64..fc310f75eada 100644 --- a/drivers/usb/storage/protocol.c +++ b/drivers/usb/storage/protocol.c @@ -121,6 +121,7 @@ void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb, /* send the command to the transport layer */ usb_stor_invoke_transport(srb, us); } +EXPORT_SYMBOL_GPL(usb_stor_transparent_scsi_command); /*********************************************************************** * Scatter-gather transfer buffer access routines @@ -199,6 +200,7 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, /* Return the amount actually transferred */ return cnt; } +EXPORT_SYMBOL_GPL(usb_stor_access_xfer_buf); /* Store the contents of buffer into srb's transfer buffer and set the * SCSI residue. @@ -215,3 +217,4 @@ void usb_stor_set_xfer_buf(unsigned char *buffer, if (buflen < scsi_bufflen(srb)) scsi_set_resid(srb, scsi_bufflen(srb) - buflen); } +EXPORT_SYMBOL_GPL(usb_stor_set_xfer_buf); diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 727c506417cc..4ca3b5860643 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -135,6 +135,12 @@ static int slave_configure(struct scsi_device *sdev) if (sdev->request_queue->max_sectors > max_sectors) blk_queue_max_sectors(sdev->request_queue, max_sectors); + } else if (sdev->type == TYPE_TAPE) { + /* Tapes need much higher max_sector limits, so just + * raise it to the maximum possible (4 GB / 512) and + * let the queue segment size sort out the real limit. + */ + blk_queue_max_sectors(sdev->request_queue, 0x7FFFFF); } /* Some USB host controllers can't do DMA; they have to use PIO. @@ -563,4 +569,4 @@ unsigned char usb_stor_sense_invalidCDB[18] = { [7] = 0x0a, /* additional length */ [12] = 0x24 /* Invalid Field in CDB */ }; - +EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB); diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 531ae5c5abf3..ab5f9f37575a 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -41,6 +41,7 @@ */ #include <linux/errno.h> +#include <linux/module.h> #include <linux/slab.h> #include <scsi/scsi.h> @@ -51,7 +52,53 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "sddr09.h" + +MODULE_DESCRIPTION("Driver for SanDisk SDDR-09 SmartMedia reader"); +MODULE_AUTHOR("Andries Brouwer <aeb@cwi.nl>, Robert Baruch <autophile@starband.net>"); +MODULE_LICENSE("GPL"); + +static int usb_stor_sddr09_dpcm_init(struct us_data *us); +static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us); +static int usb_stor_sddr09_init(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id sddr09_usb_ids[] = { +# include "unusual_sddr09.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, sddr09_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev sddr09_unusual_dev_list[] = { +# include "unusual_sddr09.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) @@ -723,7 +770,7 @@ sddr09_read_data(struct us_data *us, len = min(sectors, (unsigned int) info->blocksize) * info->pagesize; buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) { - printk("sddr09_read_data: Out of memory\n"); + printk(KERN_WARNING "sddr09_read_data: Out of memory\n"); return -ENOMEM; } @@ -838,7 +885,8 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, if (pba == UNDEF) { pba = sddr09_find_unused_pba(info, lba); if (!pba) { - printk("sddr09_write_lba: Out of unused blocks\n"); + printk(KERN_WARNING + "sddr09_write_lba: Out of unused blocks\n"); return -ENOSPC; } info->pba_to_lba[pba] = lba; @@ -849,7 +897,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, if (pba == 1) { /* Maybe it is impossible to write to PBA 1. Fake success, but don't do anything. */ - printk("sddr09: avoid writing to pba 1\n"); + printk(KERN_WARNING "sddr09: avoid writing to pba 1\n"); return 0; } @@ -954,7 +1002,7 @@ sddr09_write_data(struct us_data *us, blocklen = (pagelen << info->blockshift); blockbuffer = kmalloc(blocklen, GFP_NOIO); if (!blockbuffer) { - printk("sddr09_write_data: Out of memory\n"); + printk(KERN_WARNING "sddr09_write_data: Out of memory\n"); return -ENOMEM; } @@ -965,7 +1013,7 @@ sddr09_write_data(struct us_data *us, len = min(sectors, (unsigned int) info->blocksize) * info->pagesize; buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) { - printk("sddr09_write_data: Out of memory\n"); + printk(KERN_WARNING "sddr09_write_data: Out of memory\n"); kfree(blockbuffer); return -ENOMEM; } @@ -1112,7 +1160,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) { if (result) { US_DEBUGP("Result of read_deviceID is %d\n", result); - printk("sddr09: could not read card info\n"); + printk(KERN_WARNING "sddr09: could not read card info\n"); return NULL; } @@ -1153,7 +1201,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) { sprintf(blurbtxt + strlen(blurbtxt), ", WP"); - printk("%s\n", blurbtxt); + printk(KERN_WARNING "%s\n", blurbtxt); return cardinfo; } @@ -1184,7 +1232,7 @@ sddr09_read_map(struct us_data *us) { alloc_len = (alloc_blocks << CONTROL_SHIFT); buffer = kmalloc(alloc_len, GFP_NOIO); if (buffer == NULL) { - printk("sddr09_read_map: out of memory\n"); + printk(KERN_WARNING "sddr09_read_map: out of memory\n"); result = -1; goto done; } @@ -1198,7 +1246,7 @@ sddr09_read_map(struct us_data *us) { info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO); if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) { - printk("sddr09_read_map: out of memory\n"); + printk(KERN_WARNING "sddr09_read_map: out of memory\n"); result = -1; goto done; } @@ -1238,7 +1286,8 @@ sddr09_read_map(struct us_data *us) { if (ptr[j] != 0) goto nonz; info->pba_to_lba[i] = UNUSABLE; - printk("sddr09: PBA %d has no logical mapping\n", i); + printk(KERN_WARNING "sddr09: PBA %d has no logical mapping\n", + i); continue; nonz: @@ -1251,7 +1300,8 @@ sddr09_read_map(struct us_data *us) { nonff: /* normal PBAs start with six FFs */ if (j < 6) { - printk("sddr09: PBA %d has no logical mapping: " + printk(KERN_WARNING + "sddr09: PBA %d has no logical mapping: " "reserved area = %02X%02X%02X%02X " "data status %02X block status %02X\n", i, ptr[0], ptr[1], ptr[2], ptr[3], @@ -1261,7 +1311,8 @@ sddr09_read_map(struct us_data *us) { } if ((ptr[6] >> 4) != 0x01) { - printk("sddr09: PBA %d has invalid address field " + printk(KERN_WARNING + "sddr09: PBA %d has invalid address field " "%02X%02X/%02X%02X\n", i, ptr[6], ptr[7], ptr[11], ptr[12]); info->pba_to_lba[i] = UNUSABLE; @@ -1270,7 +1321,8 @@ sddr09_read_map(struct us_data *us) { /* check even parity */ if (parity[ptr[6] ^ ptr[7]]) { - printk("sddr09: Bad parity in LBA for block %d" + printk(KERN_WARNING + "sddr09: Bad parity in LBA for block %d" " (%02X %02X)\n", i, ptr[6], ptr[7]); info->pba_to_lba[i] = UNUSABLE; continue; @@ -1289,7 +1341,8 @@ sddr09_read_map(struct us_data *us) { */ if (lba >= 1000) { - printk("sddr09: Bad low LBA %d for block %d\n", + printk(KERN_WARNING + "sddr09: Bad low LBA %d for block %d\n", lba, i); goto possibly_erase; } @@ -1297,7 +1350,8 @@ sddr09_read_map(struct us_data *us) { lba += 1000*(i/0x400); if (info->lba_to_pba[lba] != UNDEF) { - printk("sddr09: LBA %d seen for PBA %d and %d\n", + printk(KERN_WARNING + "sddr09: LBA %d seen for PBA %d and %d\n", lba, info->lba_to_pba[lba], i); goto possibly_erase; } @@ -1399,7 +1453,7 @@ sddr09_common_init(struct us_data *us) { * unusual devices list but called from here then LUN 0 of the combo reader * is not recognized. But I do not know what precisely these calls do. */ -int +static int usb_stor_sddr09_dpcm_init(struct us_data *us) { int result; unsigned char *data = us->iobuf; @@ -1449,7 +1503,7 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) { /* * Transport for the Microtech DPCM-USB */ -int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) +static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) { int ret; @@ -1491,7 +1545,7 @@ int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) /* * Transport for the Sandisk SDDR-09 */ -int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) +static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) { static unsigned char sensekey = 0, sensecode = 0; static unsigned char havefakesense = 0; @@ -1690,7 +1744,60 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) /* * Initialization routine for the sddr09 subdriver */ -int +static int usb_stor_sddr09_init(struct us_data *us) { return sddr09_common_init(us); } + +static int sddr09_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - sddr09_usb_ids) + sddr09_unusual_dev_list); + if (result) + return result; + + if (us->protocol == US_PR_DPCM_USB) { + us->transport_name = "Control/Bulk-EUSB/SDDR09"; + us->transport = dpcm_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 1; + } else { + us->transport_name = "EUSB/SDDR09"; + us->transport = sddr09_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 0; + } + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver sddr09_driver = { + .name = "ums-sddr09", + .probe = sddr09_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = sddr09_usb_ids, + .soft_unbind = 1, +}; + +static int __init sddr09_init(void) +{ + return usb_register(&sddr09_driver); +} + +static void __exit sddr09_exit(void) +{ + usb_deregister(&sddr09_driver); +} + +module_init(sddr09_init); +module_exit(sddr09_exit); diff --git a/drivers/usb/storage/sddr09.h b/drivers/usb/storage/sddr09.h deleted file mode 100644 index b701172e12e3..000000000000 --- a/drivers/usb/storage/sddr09.h +++ /dev/null @@ -1,38 +0,0 @@ -/* Driver for SanDisk SDDR-09 SmartMedia reader - * Header File - * - * Current development and maintenance by: - * (c) 2000 Robert Baruch (autophile@dol.net) - * (c) 2002 Andries Brouwer (aeb@cwi.nl) - * - * See sddr09.c for more explanation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_SHUTTLE_EUSB_SDDR09_H -#define _USB_SHUTTLE_EUSB_SDDR09_H - -/* Sandisk SDDR-09 stuff */ - -extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us); -extern int usb_stor_sddr09_init(struct us_data *us); - -/* Microtech DPCM-USB stuff */ - -extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us); -extern int usb_stor_sddr09_dpcm_init(struct us_data *us); - -#endif diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index 0d8df7577899..44dfed7754ed 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -24,6 +24,7 @@ #include <linux/jiffies.h> #include <linux/errno.h> +#include <linux/module.h> #include <linux/slab.h> #include <scsi/scsi.h> @@ -33,7 +34,48 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "sddr55.h" + +MODULE_DESCRIPTION("Driver for SanDisk SDDR-55 SmartMedia reader"); +MODULE_AUTHOR("Simon Munton"); +MODULE_LICENSE("GPL"); + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id sddr55_usb_ids[] = { +# include "unusual_sddr55.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, sddr55_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev sddr55_unusual_dev_list[] = { +# include "unusual_sddr55.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) @@ -513,7 +555,8 @@ static int sddr55_read_deviceID(struct us_data *us, } -int sddr55_reset(struct us_data *us) { +static int sddr55_reset(struct us_data *us) +{ return 0; } @@ -703,7 +746,9 @@ static int sddr55_read_map(struct us_data *us) { if (info->lba_to_pba[lba + zone * 1000] != NOT_ALLOCATED && !info->force_read_only) { - printk("sddr55: map inconsistency at LBA %04X\n", lba + zone * 1000); + printk(KERN_WARNING + "sddr55: map inconsistency at LBA %04X\n", + lba + zone * 1000); info->force_read_only = 1; } @@ -732,7 +777,7 @@ static void sddr55_card_info_destructor(void *extra) { /* * Transport for the Sandisk SDDR-55 */ -int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) +static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) { int result; static unsigned char inquiry_response[8] = { @@ -929,3 +974,49 @@ int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer? } + +static int sddr55_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - sddr55_usb_ids) + sddr55_unusual_dev_list); + if (result) + return result; + + us->transport_name = "SDDR55"; + us->transport = sddr55_transport; + us->transport_reset = sddr55_reset; + us->max_lun = 0; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver sddr55_driver = { + .name = "ums-sddr55", + .probe = sddr55_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = sddr55_usb_ids, + .soft_unbind = 1, +}; + +static int __init sddr55_init(void) +{ + return usb_register(&sddr55_driver); +} + +static void __exit sddr55_exit(void) +{ + usb_deregister(&sddr55_driver); +} + +module_init(sddr55_init); +module_exit(sddr55_exit); diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index ae6d64810d2a..b62a28814ebe 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -42,6 +42,7 @@ */ #include <linux/errno.h> +#include <linux/module.h> #include <linux/slab.h> #include <linux/cdrom.h> @@ -52,7 +53,100 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "shuttle_usbat.h" + +MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable"); +MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>"); +MODULE_LICENSE("GPL"); + +/* Supported device types */ +#define USBAT_DEV_HP8200 0x01 +#define USBAT_DEV_FLASH 0x02 + +#define USBAT_EPP_PORT 0x10 +#define USBAT_EPP_REGISTER 0x30 +#define USBAT_ATA 0x40 +#define USBAT_ISA 0x50 + +/* Commands (need to be logically OR'd with an access type */ +#define USBAT_CMD_READ_REG 0x00 +#define USBAT_CMD_WRITE_REG 0x01 +#define USBAT_CMD_READ_BLOCK 0x02 +#define USBAT_CMD_WRITE_BLOCK 0x03 +#define USBAT_CMD_COND_READ_BLOCK 0x04 +#define USBAT_CMD_COND_WRITE_BLOCK 0x05 +#define USBAT_CMD_WRITE_REGS 0x07 + +/* Commands (these don't need an access type) */ +#define USBAT_CMD_EXEC_CMD 0x80 +#define USBAT_CMD_SET_FEAT 0x81 +#define USBAT_CMD_UIO 0x82 + +/* Methods of accessing UIO register */ +#define USBAT_UIO_READ 1 +#define USBAT_UIO_WRITE 0 + +/* Qualifier bits */ +#define USBAT_QUAL_FCQ 0x20 /* full compare */ +#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */ + +/* USBAT Flash Media status types */ +#define USBAT_FLASH_MEDIA_NONE 0 +#define USBAT_FLASH_MEDIA_CF 1 + +/* USBAT Flash Media change types */ +#define USBAT_FLASH_MEDIA_SAME 0 +#define USBAT_FLASH_MEDIA_CHANGED 1 + +/* USBAT ATA registers */ +#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */ +#define USBAT_ATA_FEATURES 0x11 /* set features (W) */ +#define USBAT_ATA_ERROR 0x11 /* error (R) */ +#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */ +#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */ +#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */ +#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */ +#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */ +#define USBAT_ATA_STATUS 0x17 /* device status (R) */ +#define USBAT_ATA_CMD 0x17 /* device command (W) */ +#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */ + +/* USBAT User I/O Data registers */ +#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */ +#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */ + /* CDT = ACKD & !UI1 & !UI0 */ +#define USBAT_UIO_1 0x20 /* I/O 1 */ +#define USBAT_UIO_0 0x10 /* I/O 0 */ +#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */ +#define USBAT_UIO_UI1 0x04 /* Input 1 */ +#define USBAT_UIO_UI0 0x02 /* Input 0 */ +#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */ + +/* USBAT User I/O Enable registers */ +#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */ +#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */ +#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */ + /* If ACKD=1, set OE1 to 1 also. */ +#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */ +#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */ + +/* USBAT Features */ +#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */ +#define USBAT_FEAT_U1 0x08 +#define USBAT_FEAT_U0 0x04 +#define USBAT_FEAT_ET1 0x02 +#define USBAT_FEAT_ET2 0x01 + +struct usbat_info { + int devicetype; + + /* Used for Flash readers only */ + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ + + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; #define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) ) #define LSB_of(s) ((s)&0xFF) @@ -63,6 +157,48 @@ static int transferred = 0; static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us); static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us); +static int init_usbat_cd(struct us_data *us); +static int init_usbat_flash(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id usbat_usb_ids[] = { +# include "unusual_usbat.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, usbat_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev usbat_unusual_dev_list[] = { +# include "unusual_usbat.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + /* * Convenience function to produce an ATA read/write sectors command * Use cmd=0x20 for read, cmd=0x30 for write @@ -1684,37 +1820,61 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) return USB_STOR_TRANSPORT_FAILED; } -int init_usbat_cd(struct us_data *us) +static int init_usbat_cd(struct us_data *us) { return init_usbat(us, USBAT_DEV_HP8200); } - -int init_usbat_flash(struct us_data *us) +static int init_usbat_flash(struct us_data *us) { return init_usbat(us, USBAT_DEV_FLASH); } -int init_usbat_probe(struct us_data *us) +static int usbat_probe(struct usb_interface *intf, + const struct usb_device_id *id) { - return init_usbat(us, 0); + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - usbat_usb_ids) + usbat_unusual_dev_list); + if (result) + return result; + + /* The actual transport will be determined later by the + * initialization routine; this is just a placeholder. + */ + us->transport_name = "Shuttle USBAT"; + us->transport = usbat_flash_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; } -/* - * Default transport function. Attempts to detect which transport function - * should be called, makes it the new default, and calls it. - * - * This function should never be called. Our usbat_init() function detects the - * device type and changes the us->transport ptr to the transport function - * relevant to the device. - * However, we'll support this impossible(?) case anyway. - */ -int usbat_transport(struct scsi_cmnd *srb, struct us_data *us) +static struct usb_driver usbat_driver = { + .name = "ums-usbat", + .probe = usbat_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = usbat_usb_ids, + .soft_unbind = 1, +}; + +static int __init usbat_init(void) { - struct usbat_info *info = (struct usbat_info*) (us->extra); - - if (usbat_set_transport(us, info, 0)) - return USB_STOR_TRANSPORT_ERROR; + return usb_register(&usbat_driver); +} - return us->transport(srb, us); +static void __exit usbat_exit(void) +{ + usb_deregister(&usbat_driver); } + +module_init(usbat_init); +module_exit(usbat_exit); diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h deleted file mode 100644 index d8bfc43e9044..000000000000 --- a/drivers/usb/storage/shuttle_usbat.h +++ /dev/null @@ -1,123 +0,0 @@ -/* Driver for SCM Microsystems USB-ATAPI cable - * Header File - * - * Current development and maintenance by: - * (c) 2000 Robert Baruch (autophile@dol.net) - * (c) 2004, 2005 Daniel Drake <dsd@gentoo.org> - * - * See shuttle_usbat.c for more explanation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_SHUTTLE_USBAT_H -#define _USB_SHUTTLE_USBAT_H - -/* Supported device types */ -#define USBAT_DEV_HP8200 0x01 -#define USBAT_DEV_FLASH 0x02 - -#define USBAT_EPP_PORT 0x10 -#define USBAT_EPP_REGISTER 0x30 -#define USBAT_ATA 0x40 -#define USBAT_ISA 0x50 - -/* Commands (need to be logically OR'd with an access type */ -#define USBAT_CMD_READ_REG 0x00 -#define USBAT_CMD_WRITE_REG 0x01 -#define USBAT_CMD_READ_BLOCK 0x02 -#define USBAT_CMD_WRITE_BLOCK 0x03 -#define USBAT_CMD_COND_READ_BLOCK 0x04 -#define USBAT_CMD_COND_WRITE_BLOCK 0x05 -#define USBAT_CMD_WRITE_REGS 0x07 - -/* Commands (these don't need an access type) */ -#define USBAT_CMD_EXEC_CMD 0x80 -#define USBAT_CMD_SET_FEAT 0x81 -#define USBAT_CMD_UIO 0x82 - -/* Methods of accessing UIO register */ -#define USBAT_UIO_READ 1 -#define USBAT_UIO_WRITE 0 - -/* Qualifier bits */ -#define USBAT_QUAL_FCQ 0x20 /* full compare */ -#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */ - -/* USBAT Flash Media status types */ -#define USBAT_FLASH_MEDIA_NONE 0 -#define USBAT_FLASH_MEDIA_CF 1 - -/* USBAT Flash Media change types */ -#define USBAT_FLASH_MEDIA_SAME 0 -#define USBAT_FLASH_MEDIA_CHANGED 1 - -/* USBAT ATA registers */ -#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */ -#define USBAT_ATA_FEATURES 0x11 /* set features (W) */ -#define USBAT_ATA_ERROR 0x11 /* error (R) */ -#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */ -#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */ -#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */ -#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */ -#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */ -#define USBAT_ATA_STATUS 0x17 /* device status (R) */ -#define USBAT_ATA_CMD 0x17 /* device command (W) */ -#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */ - -/* USBAT User I/O Data registers */ -#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */ -#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */ - /* CDT = ACKD & !UI1 & !UI0 */ -#define USBAT_UIO_1 0x20 /* I/O 1 */ -#define USBAT_UIO_0 0x10 /* I/O 0 */ -#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */ -#define USBAT_UIO_UI1 0x04 /* Input 1 */ -#define USBAT_UIO_UI0 0x02 /* Input 0 */ -#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */ - -/* USBAT User I/O Enable registers */ -#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */ -#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */ -#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */ - /* If ACKD=1, set OE1 to 1 also. */ -#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */ -#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */ - -/* USBAT Features */ -#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */ -#define USBAT_FEAT_U1 0x08 -#define USBAT_FEAT_U0 0x04 -#define USBAT_FEAT_ET1 0x02 -#define USBAT_FEAT_ET2 0x01 - -extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us); -extern int init_usbat_cd(struct us_data *us); -extern int init_usbat_flash(struct us_data *us); -extern int init_usbat_probe(struct us_data *us); - -struct usbat_info { - int devicetype; - - /* Used for Flash readers only */ - unsigned long sectors; /* total sector count */ - unsigned long ssize; /* sector size in bytes */ - - unsigned char sense_key; - unsigned long sense_asc; /* additional sense code */ - unsigned long sense_ascq; /* additional sense code qualifier */ -}; - -#endif diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index fb65d221cedf..49aedb36dc19 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -220,6 +220,7 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe, status = us->current_urb->actual_length; return status; } +EXPORT_SYMBOL_GPL(usb_stor_control_msg); /* This is a version of usb_clear_halt() that allows early termination and * doesn't read the status from the device -- this is because some devices @@ -254,6 +255,7 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) US_DEBUGP("%s: result = %d\n", __func__, result); return result; } +EXPORT_SYMBOL_GPL(usb_stor_clear_halt); /* @@ -352,6 +354,7 @@ int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe, return interpret_urb_result(us, pipe, size, result, us->current_urb->actual_length); } +EXPORT_SYMBOL_GPL(usb_stor_ctrl_transfer); /* * Receive one interrupt buffer, without timeouts, but allowing early @@ -407,6 +410,7 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, return interpret_urb_result(us, pipe, length, result, us->current_urb->actual_length); } +EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_buf); /* * Transfer a scatter-gather list via bulk transfer @@ -474,6 +478,7 @@ int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe, scsi_set_resid(srb, scsi_bufflen(srb) - partial); return result; } +EXPORT_SYMBOL_GPL(usb_stor_bulk_srb); /* * Transfer an entire SCSI command's worth of data payload over the bulk @@ -509,6 +514,7 @@ int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe, *residual = length_left; return result; } +EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg); /*********************************************************************** * Transport routines @@ -781,7 +787,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) /* Did we transfer less than the minimum amount required? */ if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) && scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow) - srb->result = (DID_ERROR << 16) | (SUGGEST_RETRY << 24); + srb->result = DID_ERROR << 16; last_sector_hacks(us, srb); return; @@ -940,6 +946,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) usb_stor_clear_halt(us, pipe); return USB_STOR_TRANSPORT_FAILED; } +EXPORT_SYMBOL_GPL(usb_stor_CB_transport); /* * Bulk only transport @@ -1156,6 +1163,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) /* we should never get here, but if we do, we're in trouble */ return USB_STOR_TRANSPORT_ERROR; } +EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport); /*********************************************************************** * Reset routines @@ -1230,6 +1238,7 @@ int usb_stor_CB_reset(struct us_data *us) USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE); } +EXPORT_SYMBOL_GPL(usb_stor_CB_reset); /* This issues a Bulk-only Reset to the device in question, including * clearing the subsequent endpoint halts that may occur. @@ -1242,6 +1251,7 @@ int usb_stor_Bulk_reset(struct us_data *us) USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, us->ifnum, NULL, 0); } +EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset); /* Issue a USB port reset to the device. The caller must not hold * us->dev_mutex. diff --git a/drivers/usb/storage/freecom.h b/drivers/usb/storage/unusual_alauda.h index 20d0fe6ba0c8..8c412f885dd2 100644 --- a/drivers/usb/storage/freecom.h +++ b/drivers/usb/storage/unusual_alauda.h @@ -1,13 +1,4 @@ -/* Driver for Freecom USB/IDE adaptor - * - * Freecom v0.1: - * - * First release - * - * Current development and maintenance by: - * (c) 2000 David Brown <usb-storage@davidb.org> - * - * See freecom.c for more explanation +/* Unusual Devices File for the Alauda-based card readers * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -24,11 +15,17 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef _FREECOM_USB_H -#define _FREECOM_USB_H +#if defined(CONFIG_USB_STORAGE_ALAUDA) || \ + defined(CONFIG_USB_STORAGE_ALAUDA_MODULE) + +UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102, + "Fujifilm", + "DPC-R1 (Alauda)", + US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0), -extern int freecom_transport(struct scsi_cmnd *srb, struct us_data *us); -extern int usb_stor_freecom_reset(struct us_data *us); -extern int freecom_init (struct us_data *us); +UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102, + "Olympus", + "MAUSB-10 (Alauda)", + US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0), -#endif +#endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */ diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h new file mode 100644 index 000000000000..44be6d75dab6 --- /dev/null +++ b/drivers/usb/storage/unusual_cypress.h @@ -0,0 +1,34 @@ +/* Unusual Devices File for devices based on the Cypress USB/ATA bridge + * with support for ATACB + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || \ + defined(CONFIG_USB_STORAGE_CYPRESS_ATACB_MODULE) + +/* CY7C68300 : support atacb */ +UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, + "Cypress", + "Cypress AT2LP", + US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0), + +/* CY7C68310 : support atacb and atacb2 */ +UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, + "Cypress", + "Cypress ISD-300LP", + US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0), + +#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */ diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h new file mode 100644 index 000000000000..c9298ce9f223 --- /dev/null +++ b/drivers/usb/storage/unusual_datafab.h @@ -0,0 +1,98 @@ +/* Unusual Devices File for the Datafab USB Compact Flash reader + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_DATAFAB) || \ + defined(CONFIG_USB_STORAGE_DATAFAB_MODULE) + +UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015, + "Datafab", + "MDCFE-B USB CF Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +/* + * The following Datafab-based devices may or may not work + * using the current driver...the 0xffff is arbitrary since I + * don't know what device versions exist for these guys. + * + * The 0xa003 and 0xa004 devices in particular I'm curious about. + * I'm told they exist but so far nobody has come forward to say that + * they work with this driver. Given the success we've had getting + * other Datafab-based cards operational with this driver, I've decided + * to leave these two devices in the list. + */ +UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff, + "SIIG/Datafab", + "SIIG/Datafab Memory Stick+CF Reader/Writer", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */ +UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff, + "Datafab/Unknown", + "MD2/MD3 Disk enclosure", + US_SC_SCSI, US_PR_DATAFAB, NULL, + US_FL_SINGLE_LUN), + +UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff, + "Datafab/Unknown", + "Datafab-based Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff, + "Datafab/Unknown", + "Datafab-based Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff, + "PNY/Datafab", + "PNY/Datafab CF+SM Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff, + "Simple Tech/Datafab", + "Simple Tech/Datafab CF+SM Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +/* Submitted by Olaf Hering <olh@suse.de> */ +UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, + "Datafab Systems, Inc.", + "USB to CF + SM Combo (LC1)", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +/* Reported by Felix Moeller <felix@derklecks.de> + * in Germany this is sold by Hama with the productnumber 46952 + * as "DualSlot CompactFlash(TM) & MStick Drive USB" + */ +UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff, + "DataFab Systems Inc.", + "USB CF+MS", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, + "Acomdata", + "CF", + US_SC_SCSI, US_PR_DATAFAB, NULL, + US_FL_SINGLE_LUN), + +#endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 6f59c8e510ea..1c1f643e8a78 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -53,6 +53,11 @@ * as opposed to devices that do something strangely or wrongly. */ +#if !defined(CONFIG_USB_STORAGE_SDDR09) && \ + !defined(CONFIG_USB_STORAGE_SDDR09_MODULE) +#define NO_SDDR09 +#endif + /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr> */ UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100, @@ -80,18 +85,6 @@ UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, "CD-Writer+", US_SC_8070, US_PR_CB, NULL, 0), -#ifdef CONFIG_USB_STORAGE_USBAT -UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, - "HP", - "CD-Writer+ 8200e", - US_SC_8070, US_PR_USBAT, init_usbat_cd, 0), - -UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, - "HP", - "CD-Writer+ CD-4e", - US_SC_8070, US_PR_USBAT, init_usbat_cd, 0), -#endif - /* Reported by Ben Efros <ben@pc-doctor.com> */ UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000, "HP", @@ -226,7 +219,7 @@ UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610, US_FL_MAX_SECTORS_64 ), /* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */ -UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x0452, +UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999, "Nokia", "Nokia 6233", US_SC_DEVICE, US_PR_DEVICE, NULL, @@ -246,12 +239,7 @@ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), -#ifdef CONFIG_USB_STORAGE_SDDR09 -UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, - "Microtech", - "CameraMate (DPCM_USB)", - US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), -#else +#ifdef NO_SDDR09 UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, "Microtech", "CameraMate", @@ -288,13 +276,6 @@ UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), -#ifdef CONFIG_USB_STORAGE_KARMA -UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, - "Rio", - "Rio Karma", - US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0), -#endif - /* Reported by Tamas Kerecsen <kerecsen@bigfoot.com> * Obviously the PROM has not been customized by the VAR; * the Vendor and Product string descriptors are: @@ -375,22 +356,6 @@ UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, US_SC_DEVICE, US_PR_CB, NULL, US_FL_MAX_SECTORS_MIN), -#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB -/* CY7C68300 : support atacb */ -UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, - "Cypress", - "Cypress AT2LP", - US_SC_CYP_ATACB, US_PR_DEVICE, NULL, - 0), - -/* CY7C68310 : support atacb and atacb2 */ -UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, - "Cypress", - "Cypress ISD-300LP", - US_SC_CYP_ATACB, US_PR_DEVICE, NULL, - 0), -#endif - /* Reported by Simon Levitt <simon@whattf.com> * This entry needs Sub and Proto fields */ UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, @@ -467,20 +432,7 @@ UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), -#ifdef CONFIG_USB_STORAGE_SDDR09 -UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999, - "Sandisk", - "ImageMate SDDR09", - US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, - 0), - -/* This entry is from Andries.Brouwer@cwi.nl */ -UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, - "SCM Microsystems", - "eUSB SmartMedia / CompactFlash Adapter", - US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init, - 0), -#else +#ifdef NO_SDDR09 UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, "SCM Microsystems", "eUSB CompactFlash Adapter", @@ -535,14 +487,6 @@ UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, "CD-RW Device", US_SC_8020, US_PR_CB, NULL, 0), -#ifdef CONFIG_USB_STORAGE_USBAT -UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, - "Shuttle/SCM", - "USBAT-02", - US_SC_SCSI, US_PR_USBAT, init_usbat_flash, - US_FL_SINGLE_LUN), -#endif - /* Reported by Dmitry Khlystov <adminimus@gmail.com> */ UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220, "Samsung", @@ -645,14 +589,6 @@ UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), -#ifdef CONFIG_USB_STORAGE_ISD200 -UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110, - "Sony", - "Portable USB Harddrive V2", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), -#endif - /* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */ UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000, "Sony", @@ -749,13 +685,6 @@ UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, "Silicon Media R/W", US_SC_DEVICE, US_PR_DEVICE, NULL, 0), -#ifdef CONFIG_USB_STORAGE_ALAUDA -UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102, - "Fujifilm", - "DPC-R1 (Alauda)", - US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ), -#endif - /* Reported by RTE <raszilki@yandex.ru> */ UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141, "JetFlash", @@ -798,32 +727,6 @@ UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110, US_SC_SCSI, US_PR_BULK, NULL, US_FL_NEED_OVERRIDE ), -#ifdef CONFIG_USB_STORAGE_ISD200 -UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110, - "In-System", - "USB/IDE Bridge (ATA/ATAPI)", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), - -UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110, - "In-System", - "Portable USB Harddrive V2", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), - -UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110, - "In-System", - "Portable USB Harddrive V2", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), - -UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110, - "In-System", - "USB Storage Adapter V2", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), -#endif - /* Submitted by Sven Anderson <sven-linux@anderson.de> * There are at least four ProductIDs used for iPods, so I added 0x1202 and * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears @@ -877,14 +780,6 @@ UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0), -#ifdef CONFIG_USB_STORAGE_JUMPSHOT -UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001, - "Lexar", - "Jumpshot USB CF Reader", - US_SC_SCSI, US_PR_JUMPSHOT, NULL, - US_FL_NEED_OVERRIDE ), -#endif - /* Reported by Blake Matheny <bmatheny@purdue.edu> */ UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113, "Lexar", @@ -935,14 +830,6 @@ UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, "Floppy Drive", US_SC_UFI, US_PR_CB, NULL, 0 ), -#ifdef CONFIG_USB_STORAGE_SDDR09 -UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100, - "Olympus", - "Camedia MAUSB-2", - US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, - 0), -#endif - /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */ UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001, "SigmaTel", @@ -951,7 +838,9 @@ UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001, US_FL_FIX_CAPACITY ), /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */ -UNUSUAL_DEV( 0x067b, 0x2507, 0x0100, 0x0100, +/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by + * Thomas Bartosik <tbartdev@gmx-topmail.de> */ +UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100, "Prolific Technology Inc.", "Mass Storage Device", US_SC_DEVICE, US_PR_DEVICE, NULL, @@ -1041,35 +930,12 @@ UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), -#ifdef CONFIG_USB_STORAGE_USBAT -UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005, - "Sandisk", - "ImageMate SDDR-05b", - US_SC_SCSI, US_PR_USBAT, init_usbat_flash, - US_FL_SINGLE_LUN ), -#endif - UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, "Sandisk", "ImageMate SDDR-12", US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN ), -#ifdef CONFIG_USB_STORAGE_SDDR09 -UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999, - "Sandisk", - "ImageMate SDDR-09", - US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, - 0), -#endif - -#ifdef CONFIG_USB_STORAGE_FREECOM -UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999, - "Freecom", - "USB-IDE", - US_SC_QIC, US_PR_FREECOM, freecom_init, 0), -#endif - /* Reported by Eero Volotinen <eero@ping-viini.org> */ UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, "Freecom Technologies", @@ -1089,12 +955,7 @@ UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), -#ifdef CONFIG_USB_STORAGE_SDDR09 -UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, - "Microtech", - "CameraMate (DPCM_USB)", - US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), -#else +#ifdef NO_SDDR09 UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, "Microtech", "CameraMate", @@ -1102,108 +963,6 @@ UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, US_FL_SINGLE_LUN ), #endif -#ifdef CONFIG_USB_STORAGE_ALAUDA -UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102, - "Olympus", - "MAUSB-10 (Alauda)", - US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ), -#endif - -#ifdef CONFIG_USB_STORAGE_DATAFAB -UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015, - "Datafab", - "MDCFE-B USB CF Reader", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), - -/* - * The following Datafab-based devices may or may not work - * using the current driver...the 0xffff is arbitrary since I - * don't know what device versions exist for these guys. - * - * The 0xa003 and 0xa004 devices in particular I'm curious about. - * I'm told they exist but so far nobody has come forward to say that - * they work with this driver. Given the success we've had getting - * other Datafab-based cards operational with this driver, I've decided - * to leave these two devices in the list. - */ -UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff, - "SIIG/Datafab", - "SIIG/Datafab Memory Stick+CF Reader/Writer", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), - -/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */ -UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff, - "Datafab/Unknown", - "MD2/MD3 Disk enclosure", - US_SC_SCSI, US_PR_DATAFAB, NULL, - US_FL_SINGLE_LUN ), - -UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff, - "Datafab/Unknown", - "Datafab-based Reader", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), - -UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff, - "Datafab/Unknown", - "Datafab-based Reader", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), - -UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff, - "PNY/Datafab", - "PNY/Datafab CF+SM Reader", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), - -UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff, - "Simple Tech/Datafab", - "Simple Tech/Datafab CF+SM Reader", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), -#endif - -#ifdef CONFIG_USB_STORAGE_SDDR55 -/* Contributed by Peter Waechtler */ -UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999, - "Datafab", - "MDSM-B reader", - US_SC_SCSI, US_PR_SDDR55, NULL, - US_FL_FIX_INQUIRY ), -#endif - -#ifdef CONFIG_USB_STORAGE_DATAFAB -/* Submitted by Olaf Hering <olh@suse.de> */ -UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, - "Datafab Systems, Inc.", - "USB to CF + SM Combo (LC1)", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), -#endif -#ifdef CONFIG_USB_STORAGE_SDDR55 -/* SM part - aeb <Andries.Brouwer@cwi.nl> */ -UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, - "Datafab Systems, Inc.", - "USB to CF + SM Combo (LC1)", - US_SC_SCSI, US_PR_SDDR55, NULL, - US_FL_SINGLE_LUN ), -#endif - -#ifdef CONFIG_USB_STORAGE_DATAFAB -/* Reported by Felix Moeller <felix@derklecks.de> - * in Germany this is sold by Hama with the productnumber 46952 - * as "DualSlot CompactFlash(TM) & MStick Drive USB" - */ -UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff, - "DataFab Systems Inc.", - "USB CF+MS", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), - -#endif - /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100 * Only revision 1.13 tested (same for all of the above devices, * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY. @@ -1390,6 +1149,16 @@ UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, 0 ), +/* Reported by Jan Dumon <j.dumon@option.com> + * This device (wrongly) has a vendor-specific device descriptor. + * The entry is needed so usb-storage can bind to it's mass-storage + * interface as an interface driver */ +UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000, + "Option", + "GI 0431 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + /* Reported by Ben Efros <ben@pc-doctor.com> */ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, "Seagate", @@ -1397,29 +1166,6 @@ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SANE_SENSE ), -#ifdef CONFIG_USB_STORAGE_ISD200 -UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, - "ATI", - "USB Cable 205", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), -#endif - -#ifdef CONFIG_USB_STORAGE_DATAFAB -UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, - "Acomdata", - "CF", - US_SC_SCSI, US_PR_DATAFAB, NULL, - US_FL_SINGLE_LUN ), -#endif -#ifdef CONFIG_USB_STORAGE_SDDR55 -UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, - "Acomdata", - "SM", - US_SC_SCSI, US_PR_SDDR55, NULL, - US_FL_SINGLE_LUN ), -#endif - UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999, "Maxtor", "USB to SATA", @@ -1436,23 +1182,6 @@ UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), -/* Submitted by: Nick Sillik <n.sillik@temple.edu> - * Needed for OneTouch extension to usb-storage - * - */ -#ifdef CONFIG_USB_STORAGE_ONETOUCH - UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999, - "Maxtor", - "OneTouch External Harddrive", - US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input, - 0), - UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999, - "Maxtor", - "OneTouch External Harddrive", - US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input, - 0), -#endif - /* Submitted by Joris Struyve <joris@struyve.be> */ UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff, "Medion", @@ -2105,14 +1834,6 @@ UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, "Micro Mini 1GB", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), -#ifdef CONFIG_USB_STORAGE_SDDR55 -UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999, - "Sandisk", - "ImageMate SDDR55", - US_SC_SCSI, US_PR_SDDR55, NULL, - US_FL_SINGLE_LUN), -#endif - /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */ UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, "DataStor", diff --git a/drivers/usb/storage/cypress_atacb.h b/drivers/usb/storage/unusual_freecom.h index fbada898d56b..375867942391 100644 --- a/drivers/usb/storage/cypress_atacb.h +++ b/drivers/usb/storage/unusual_freecom.h @@ -1,8 +1,4 @@ -/* - * Support for emulating SAT (ata pass through) on devices based - * on the Cypress USB/ATA bridge supporting ATACB. - * - * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr) +/* Unusual Devices File for the Freecom USB/IDE adaptor * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -19,7 +15,12 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef _CYPRESS_ATACB_H_ -#define _CYPRESS_ATACB_H_ -extern void cypress_atacb_passthrough(struct scsi_cmnd*, struct us_data*); -#endif +#if defined(CONFIG_USB_STORAGE_FREECOM) || \ + defined(CONFIG_USB_STORAGE_FREECOM_MODULE) + +UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999, + "Freecom", + "USB-IDE", + US_SC_QIC, US_PR_FREECOM, init_freecom, 0), + +#endif /* defined(CONFIG_USB_STORAGE_FREECOM) || ... */ diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h new file mode 100644 index 000000000000..0d99dde3382a --- /dev/null +++ b/drivers/usb/storage/unusual_isd200.h @@ -0,0 +1,57 @@ +/* Unusual Devices File for In-System Design, Inc. ISD200 ASIC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_ISD200) || \ + defined(CONFIG_USB_STORAGE_ISD200_MODULE) + +UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110, + "Sony", + "Portable USB Harddrive V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110, + "In-System", + "USB/IDE Bridge (ATA/ATAPI)", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110, + "In-System", + "Portable USB Harddrive V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110, + "In-System", + "Portable USB Harddrive V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110, + "In-System", + "USB Storage Adapter V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, + "ATI", + "USB Cable 205", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +#endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */ diff --git a/drivers/usb/storage/sddr55.h b/drivers/usb/storage/unusual_jumpshot.h index a815a0470c84..2e549b1c2c62 100644 --- a/drivers/usb/storage/sddr55.h +++ b/drivers/usb/storage/unusual_jumpshot.h @@ -1,10 +1,4 @@ -/* Driver for SanDisk SDDR-55 SmartMedia reader - * Header File - * - * Current development and maintenance by: - * (c) 2002 Simon Munton - * - * See sddr55.c for more explanation +/* Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -21,12 +15,13 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef _USB_SHUTTLE_EUSB_SDDR55_H -#define _USB_SHUTTLE_EUSB_SDDR55_H - -/* Sandisk SDDR-55 stuff */ +#if defined(CONFIG_USB_STORAGE_JUMPSHOT) || \ + defined(CONFIG_USB_STORAGE_JUMPSHOT_MODULE) -extern int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us); -extern int sddr55_reset(struct us_data *us); +UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001, + "Lexar", + "Jumpshot USB CF Reader", + US_SC_SCSI, US_PR_JUMPSHOT, NULL, + US_FL_NEED_OVERRIDE), -#endif +#endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */ diff --git a/drivers/usb/storage/isd200.h b/drivers/usb/storage/unusual_karma.h index 0a35f4fa78f8..12ae3a03e802 100644 --- a/drivers/usb/storage/isd200.h +++ b/drivers/usb/storage/unusual_karma.h @@ -1,11 +1,4 @@ -/* Header File for In-System Design, Inc. ISD200 ASIC - * - * First release - * - * Current development and maintenance by: - * (c) 2000 In-System Design, Inc. (support@in-system.com) - * - * See isd200.c for more information. +/* Unusual Devices File for the Rio Karma * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -22,10 +15,12 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef _USB_ISD200_H -#define _USB_ISD200_H +#if defined(CONFIG_USB_STORAGE_KARMA) || \ + defined(CONFIG_USB_STORAGE_KARMA_MODULE) -extern void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us); -extern int isd200_Initialization(struct us_data *us); +UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, + "Rio", + "Rio Karma", + US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0), -#endif +#endif /* defined(CONFIG_USB_STORAGE_KARMA) || ... */ diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h new file mode 100644 index 000000000000..bd9306b637df --- /dev/null +++ b/drivers/usb/storage/unusual_onetouch.h @@ -0,0 +1,36 @@ +/* Unusual Devices File for the Maxtor OneTouch USB hard drive's button + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_ONETOUCH) || \ + defined(CONFIG_USB_STORAGE_ONETOUCH_MODULE) + +/* Submitted by: Nick Sillik <n.sillik@temple.edu> + * Needed for OneTouch extension to usb-storage + */ +UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999, + "Maxtor", + "OneTouch External Harddrive", + US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input, + 0), + +UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999, + "Maxtor", + "OneTouch External Harddrive", + US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input, + 0), + +#endif /* defined(CONFIG_USB_STORAGE_ONETOUCH) || ... */ diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h new file mode 100644 index 000000000000..50cab511a4d7 --- /dev/null +++ b/drivers/usb/storage/unusual_sddr09.h @@ -0,0 +1,56 @@ +/* Unusual Devices File for SanDisk SDDR-09 SmartMedia reader + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_SDDR09) || \ + defined(CONFIG_USB_STORAGE_SDDR09_MODULE) + +UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, + "Microtech", + "CameraMate (DPCM_USB)", + US_SC_SCSI, US_PR_DPCM_USB, NULL, 0), + +UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999, + "Sandisk", + "ImageMate SDDR09", + US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), + +/* This entry is from Andries.Brouwer@cwi.nl */ +UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, + "SCM Microsystems", + "eUSB SmartMedia / CompactFlash Adapter", + US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init, + 0), + +UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100, + "Olympus", + "Camedia MAUSB-2", + US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), + +UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999, + "Sandisk", + "ImageMate SDDR-09", + US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), + +UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, + "Microtech", + "CameraMate (DPCM_USB)", + US_SC_SCSI, US_PR_DPCM_USB, NULL, 0), + +#endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */ diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h new file mode 100644 index 000000000000..ae81ef7a1cfd --- /dev/null +++ b/drivers/usb/storage/unusual_sddr55.h @@ -0,0 +1,44 @@ +/* Unusual Devices File for SanDisk SDDR-55 SmartMedia reader + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_SDDR55) || \ + defined(CONFIG_USB_STORAGE_SDDR55_MODULE) + +/* Contributed by Peter Waechtler */ +UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999, + "Datafab", + "MDSM-B reader", + US_SC_SCSI, US_PR_SDDR55, NULL, + US_FL_FIX_INQUIRY), + +/* SM part - aeb <Andries.Brouwer@cwi.nl> */ +UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, + "Datafab Systems, Inc.", + "USB to CF + SM Combo (LC1)", + US_SC_SCSI, US_PR_SDDR55, NULL, 0), + +UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, + "Acomdata", + "SM", + US_SC_SCSI, US_PR_SDDR55, NULL, 0), + +UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999, + "Sandisk", + "ImageMate SDDR55", + US_SC_SCSI, US_PR_SDDR55, NULL, 0), + +#endif /* defined(CONFIG_USB_STORAGE_SDDR55) || ... */ diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h new file mode 100644 index 000000000000..80e869f10180 --- /dev/null +++ b/drivers/usb/storage/unusual_usbat.h @@ -0,0 +1,43 @@ +/* Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_USBAT) || \ + defined(CONFIG_USB_STORAGE_USBAT_MODULE) + +UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, + "HP", + "CD-Writer+ 8200e", + US_SC_8070, US_PR_USBAT, init_usbat_cd, 0), + +UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, + "HP", + "CD-Writer+ CD-4e", + US_SC_8070, US_PR_USBAT, init_usbat_cd, 0), + +UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, + "Shuttle/SCM", + "USBAT-02", + US_SC_SCSI, US_PR_USBAT, init_usbat_flash, + US_FL_SINGLE_LUN), + +UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005, + "Sandisk", + "ImageMate SDDR-05b", + US_SC_SCSI, US_PR_USBAT, init_usbat_flash, + US_FL_SINGLE_LUN), + +#endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 4becf495ca2d..8060b85fe1a3 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -5,7 +5,7 @@ * * Developed with the assistance of: * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) - * (c) 2003 Alan Stern (stern@rowland.harvard.edu) + * (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu) * * Initial work by: * (c) 1999 Michael Gee (michael@linuxspecific.com) @@ -66,39 +66,6 @@ #include "debug.h" #include "initializers.h" -#ifdef CONFIG_USB_STORAGE_USBAT -#include "shuttle_usbat.h" -#endif -#ifdef CONFIG_USB_STORAGE_SDDR09 -#include "sddr09.h" -#endif -#ifdef CONFIG_USB_STORAGE_SDDR55 -#include "sddr55.h" -#endif -#ifdef CONFIG_USB_STORAGE_FREECOM -#include "freecom.h" -#endif -#ifdef CONFIG_USB_STORAGE_ISD200 -#include "isd200.h" -#endif -#ifdef CONFIG_USB_STORAGE_DATAFAB -#include "datafab.h" -#endif -#ifdef CONFIG_USB_STORAGE_JUMPSHOT -#include "jumpshot.h" -#endif -#ifdef CONFIG_USB_STORAGE_ONETOUCH -#include "onetouch.h" -#endif -#ifdef CONFIG_USB_STORAGE_ALAUDA -#include "alauda.h" -#endif -#ifdef CONFIG_USB_STORAGE_KARMA -#include "karma.h" -#endif -#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB -#include "cypress_atacb.h" -#endif #include "sierra_ms.h" #include "option_ms.h" @@ -118,36 +85,8 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks"); /* * The entries in this table correspond, line for line, - * with the entries of us_unusual_dev_list[]. + * with the entries in usb_storage_usb_ids[], defined in usual-tables.c. */ -#ifndef CONFIG_USB_LIBUSUAL - -#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ - vendorName, productName,useProtocol, useTransport, \ - initFunction, flags) \ -{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } - -#define COMPLIANT_DEV UNUSUAL_DEV - -#define USUAL_DEV(useProto, useTrans, useType) \ -{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ - .driver_info = (USB_US_TYPE_STOR<<24) } - -static struct usb_device_id storage_usb_ids [] = { - -# include "unusual_devs.h" -#undef UNUSUAL_DEV -#undef COMPLIANT_DEV -#undef USUAL_DEV - /* Terminating entry */ - { } -}; - -MODULE_DEVICE_TABLE (usb, storage_usb_ids); -#endif /* CONFIG_USB_LIBUSUAL */ - -/* This is the list of devices we recognize, along with their flag data */ /* The vendor name should be kept at eight characters or less, and * the product name should be kept at 16 characters or less. If a device @@ -179,18 +118,17 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids); static struct us_unusual_dev us_unusual_dev_list[] = { # include "unusual_devs.h" -# undef UNUSUAL_DEV -# undef COMPLIANT_DEV -# undef USUAL_DEV - - /* Terminating entry */ - { NULL } + { } /* Terminating entry */ }; +#undef UNUSUAL_DEV +#undef COMPLIANT_DEV +#undef USUAL_DEV + #ifdef CONFIG_PM /* Minimal support for suspend and resume */ -static int storage_suspend(struct usb_interface *iface, pm_message_t message) +int usb_stor_suspend(struct usb_interface *iface, pm_message_t message) { struct us_data *us = usb_get_intfdata(iface); @@ -207,8 +145,9 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message) mutex_unlock(&us->dev_mutex); return 0; } +EXPORT_SYMBOL_GPL(usb_stor_suspend); -static int storage_resume(struct usb_interface *iface) +int usb_stor_resume(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); @@ -221,8 +160,9 @@ static int storage_resume(struct usb_interface *iface) mutex_unlock(&us->dev_mutex); return 0; } +EXPORT_SYMBOL_GPL(usb_stor_resume); -static int storage_reset_resume(struct usb_interface *iface) +int usb_stor_reset_resume(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); @@ -235,6 +175,7 @@ static int storage_reset_resume(struct usb_interface *iface) * the device */ return 0; } +EXPORT_SYMBOL_GPL(usb_stor_reset_resume); #endif /* CONFIG_PM */ @@ -243,7 +184,7 @@ static int storage_reset_resume(struct usb_interface *iface) * a USB port reset, whether from this driver or a different one. */ -static int storage_pre_reset(struct usb_interface *iface) +int usb_stor_pre_reset(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); @@ -253,8 +194,9 @@ static int storage_pre_reset(struct usb_interface *iface) mutex_lock(&us->dev_mutex); return 0; } +EXPORT_SYMBOL_GPL(usb_stor_pre_reset); -static int storage_post_reset(struct usb_interface *iface) +int usb_stor_post_reset(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); @@ -269,6 +211,7 @@ static int storage_post_reset(struct usb_interface *iface) mutex_unlock(&us->dev_mutex); return 0; } +EXPORT_SYMBOL_GPL(usb_stor_post_reset); /* * fill_inquiry_response takes an unsigned char array (which must @@ -311,6 +254,7 @@ void fill_inquiry_response(struct us_data *us, unsigned char *data, usb_stor_set_xfer_buf(data, data_len, us->srb); } +EXPORT_SYMBOL_GPL(fill_inquiry_response); static int usb_stor_control_thread(void * __us) { @@ -551,20 +495,13 @@ static void adjust_quirks(struct us_data *us) vid, pid, f); } -/* Find an unusual_dev descriptor (always succeeds in the current code) */ -static struct us_unusual_dev *find_unusual(const struct usb_device_id *id) -{ - const int id_index = id - storage_usb_ids; - return &us_unusual_dev_list[id_index]; -} - /* Get the unusual_devs entries and the string descriptors */ -static int get_device_info(struct us_data *us, const struct usb_device_id *id) +static int get_device_info(struct us_data *us, const struct usb_device_id *id, + struct us_unusual_dev *unusual_dev) { struct usb_device *dev = us->pusb_dev; struct usb_interface_descriptor *idesc = &us->pusb_intf->cur_altsetting->desc; - struct us_unusual_dev *unusual_dev = find_unusual(id); /* Store the entries */ us->unusual_dev = unusual_dev; @@ -629,7 +566,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id) } /* Get the transport settings */ -static int get_transport(struct us_data *us) +static void get_transport(struct us_data *us) { switch (us->protocol) { case US_PR_CB: @@ -651,100 +588,11 @@ static int get_transport(struct us_data *us) us->transport = usb_stor_Bulk_transport; us->transport_reset = usb_stor_Bulk_reset; break; - -#ifdef CONFIG_USB_STORAGE_USBAT - case US_PR_USBAT: - us->transport_name = "Shuttle USBAT"; - us->transport = usbat_transport; - us->transport_reset = usb_stor_CB_reset; - us->max_lun = 1; - break; -#endif - -#ifdef CONFIG_USB_STORAGE_SDDR09 - case US_PR_EUSB_SDDR09: - us->transport_name = "EUSB/SDDR09"; - us->transport = sddr09_transport; - us->transport_reset = usb_stor_CB_reset; - us->max_lun = 0; - break; -#endif - -#ifdef CONFIG_USB_STORAGE_SDDR55 - case US_PR_SDDR55: - us->transport_name = "SDDR55"; - us->transport = sddr55_transport; - us->transport_reset = sddr55_reset; - us->max_lun = 0; - break; -#endif - -#ifdef CONFIG_USB_STORAGE_DPCM - case US_PR_DPCM_USB: - us->transport_name = "Control/Bulk-EUSB/SDDR09"; - us->transport = dpcm_transport; - us->transport_reset = usb_stor_CB_reset; - us->max_lun = 1; - break; -#endif - -#ifdef CONFIG_USB_STORAGE_FREECOM - case US_PR_FREECOM: - us->transport_name = "Freecom"; - us->transport = freecom_transport; - us->transport_reset = usb_stor_freecom_reset; - us->max_lun = 0; - break; -#endif - -#ifdef CONFIG_USB_STORAGE_DATAFAB - case US_PR_DATAFAB: - us->transport_name = "Datafab Bulk-Only"; - us->transport = datafab_transport; - us->transport_reset = usb_stor_Bulk_reset; - us->max_lun = 1; - break; -#endif - -#ifdef CONFIG_USB_STORAGE_JUMPSHOT - case US_PR_JUMPSHOT: - us->transport_name = "Lexar Jumpshot Control/Bulk"; - us->transport = jumpshot_transport; - us->transport_reset = usb_stor_Bulk_reset; - us->max_lun = 1; - break; -#endif - -#ifdef CONFIG_USB_STORAGE_ALAUDA - case US_PR_ALAUDA: - us->transport_name = "Alauda Control/Bulk"; - us->transport = alauda_transport; - us->transport_reset = usb_stor_Bulk_reset; - us->max_lun = 1; - break; -#endif - -#ifdef CONFIG_USB_STORAGE_KARMA - case US_PR_KARMA: - us->transport_name = "Rio Karma/Bulk"; - us->transport = rio_karma_transport; - us->transport_reset = usb_stor_Bulk_reset; - break; -#endif - - default: - return -EIO; } - US_DEBUGP("Transport: %s\n", us->transport_name); - - /* fix for single-lun devices */ - if (us->fflags & US_FL_SINGLE_LUN) - us->max_lun = 0; - return 0; } /* Get the protocol settings */ -static int get_protocol(struct us_data *us) +static void get_protocol(struct us_data *us) { switch (us->subclass) { case US_SC_RBC: @@ -779,26 +627,7 @@ static int get_protocol(struct us_data *us) us->protocol_name = "Uniform Floppy Interface (UFI)"; us->proto_handler = usb_stor_ufi_command; break; - -#ifdef CONFIG_USB_STORAGE_ISD200 - case US_SC_ISD200: - us->protocol_name = "ISD200 ATA/ATAPI"; - us->proto_handler = isd200_ata_command; - break; -#endif - -#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB - case US_SC_CYP_ATACB: - us->protocol_name = "Transparent SCSI with Cypress ATACB"; - us->proto_handler = cypress_atacb_passthrough; - break; -#endif - - default: - return -EIO; } - US_DEBUGP("Protocol: %s\n", us->protocol_name); - return 0; } /* Get the pipe settings */ @@ -846,12 +675,12 @@ static int get_pipes(struct us_data *us) us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0); us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0); us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev, - ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + usb_endpoint_num(ep_out)); us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, - ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + usb_endpoint_num(ep_in)); if (ep_int) { us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev, - ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + usb_endpoint_num(ep_int)); us->ep_bInterval = ep_int->bInterval; } return 0; @@ -1012,17 +841,15 @@ static int usb_stor_scan_thread(void * __us) } -/* Probe to see if we can drive a newly-connected USB device */ -static int storage_probe(struct usb_interface *intf, - const struct usb_device_id *id) +/* First part of general USB mass-storage probing */ +int usb_stor_probe1(struct us_data **pus, + struct usb_interface *intf, + const struct usb_device_id *id, + struct us_unusual_dev *unusual_dev) { struct Scsi_Host *host; struct us_data *us; int result; - struct task_struct *th; - - if (usb_usual_check_type(id, USB_US_TYPE_STOR)) - return -ENXIO; US_DEBUGP("USB Mass Storage device detected\n"); @@ -1041,7 +868,7 @@ static int storage_probe(struct usb_interface *intf, * Allow 16-byte CDBs and thus > 2TB */ host->max_cmd_len = 16; - us = host_to_us(host); + *pus = us = host_to_us(host); memset(us, 0, sizeof(struct us_data)); mutex_init(&(us->dev_mutex)); init_completion(&us->cmnd_ready); @@ -1054,24 +881,46 @@ static int storage_probe(struct usb_interface *intf, if (result) goto BadDevice; - /* - * Get the unusual_devs entries and the descriptors - * - * id_index is calculated in the declaration to be the index number - * of the match from the usb_device_id table, so we can find the - * corresponding entry in the private table. - */ - result = get_device_info(us, id); + /* Get the unusual_devs entries and the descriptors */ + result = get_device_info(us, id, unusual_dev); if (result) goto BadDevice; - /* Get the transport, protocol, and pipe settings */ - result = get_transport(us); - if (result) - goto BadDevice; - result = get_protocol(us); - if (result) + /* Get standard transport and protocol settings */ + get_transport(us); + get_protocol(us); + + /* Give the caller a chance to fill in specialized transport + * or protocol settings. + */ + return 0; + +BadDevice: + US_DEBUGP("storage_probe() failed\n"); + release_everything(us); + return result; +} +EXPORT_SYMBOL_GPL(usb_stor_probe1); + +/* Second part of general USB mass-storage probing */ +int usb_stor_probe2(struct us_data *us) +{ + struct task_struct *th; + int result; + + /* Make sure the transport and protocol have both been set */ + if (!us->transport || !us->proto_handler) { + result = -ENXIO; goto BadDevice; + } + US_DEBUGP("Transport: %s\n", us->transport_name); + US_DEBUGP("Protocol: %s\n", us->protocol_name); + + /* fix for single-lun devices */ + if (us->fflags & US_FL_SINGLE_LUN) + us->max_lun = 0; + + /* Find the endpoints and calculate pipe values */ result = get_pipes(us); if (result) goto BadDevice; @@ -1080,7 +929,7 @@ static int storage_probe(struct usb_interface *intf, result = usb_stor_acquire_resources(us); if (result) goto BadDevice; - result = scsi_add_host(host, &intf->dev); + result = scsi_add_host(us_to_host(us), &us->pusb_intf->dev); if (result) { printk(KERN_WARNING USB_STORAGE "Unable to add the scsi host\n"); @@ -1108,9 +957,10 @@ BadDevice: release_everything(us); return result; } +EXPORT_SYMBOL_GPL(usb_stor_probe2); -/* Handle a disconnect event from the USB core */ -static void storage_disconnect(struct usb_interface *intf) +/* Handle a USB mass-storage disconnect */ +void usb_stor_disconnect(struct usb_interface *intf) { struct us_data *us = usb_get_intfdata(intf); @@ -1118,6 +968,42 @@ static void storage_disconnect(struct usb_interface *intf) quiesce_and_remove_host(us); release_everything(us); } +EXPORT_SYMBOL_GPL(usb_stor_disconnect); + +/* The main probe routine for standard devices */ +static int storage_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + /* + * If libusual is configured, let it decide whether a standard + * device should be handled by usb-storage or by ub. + * If the device isn't standard (is handled by a subdriver + * module) then don't accept it. + */ + if (usb_usual_check_type(id, USB_US_TYPE_STOR) || + usb_usual_ignore_device(intf)) + return -ENXIO; + + /* + * Call the general probe procedures. + * + * The unusual_dev_list array is parallel to the usb_storage_usb_ids + * table, so we use the index of the id entry to find the + * corresponding unusual_devs entry. + */ + result = usb_stor_probe1(&us, intf, id, + (id - usb_storage_usb_ids) + us_unusual_dev_list); + if (result) + return result; + + /* No special transport or protocol settings in the main module */ + + result = usb_stor_probe2(us); + return result; +} /*********************************************************************** * Initialization and registration @@ -1126,15 +1012,13 @@ static void storage_disconnect(struct usb_interface *intf) static struct usb_driver usb_storage_driver = { .name = "usb-storage", .probe = storage_probe, - .disconnect = storage_disconnect, -#ifdef CONFIG_PM - .suspend = storage_suspend, - .resume = storage_resume, - .reset_resume = storage_reset_resume, -#endif - .pre_reset = storage_pre_reset, - .post_reset = storage_post_reset, - .id_table = storage_usb_ids, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = usb_storage_usb_ids, .soft_unbind = 1, }; diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 65e674e4be99..2609efb2bd7e 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -177,4 +177,25 @@ extern void fill_inquiry_response(struct us_data *us, #define scsi_unlock(host) spin_unlock_irq(host->host_lock) #define scsi_lock(host) spin_lock_irq(host->host_lock) +/* General routines provided by the usb-storage standard core */ +#ifdef CONFIG_PM +extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message); +extern int usb_stor_resume(struct usb_interface *iface); +extern int usb_stor_reset_resume(struct usb_interface *iface); +#else +#define usb_stor_suspend NULL +#define usb_stor_resume NULL +#define usb_stor_reset_resume NULL +#endif + +extern int usb_stor_pre_reset(struct usb_interface *iface); +extern int usb_stor_post_reset(struct usb_interface *iface); + +extern int usb_stor_probe1(struct us_data **pus, + struct usb_interface *intf, + const struct usb_device_id *id, + struct us_unusual_dev *unusual_dev); +extern int usb_stor_probe2(struct us_data *us); +extern void usb_stor_disconnect(struct usb_interface *intf); + #endif diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c new file mode 100644 index 000000000000..468bde7d1971 --- /dev/null +++ b/drivers/usb/storage/usual-tables.c @@ -0,0 +1,116 @@ +/* Driver for USB Mass Storage devices + * Usual Tables File for usb-storage and libusual + * + * Copyright (C) 2009 Alan Stern (stern@rowland.harvard.edu) + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb_usual.h> + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +#define USUAL_DEV(useProto, useTrans, useType) \ +{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ + .driver_info = ((useType)<<24) } + +struct usb_device_id usb_storage_usb_ids[] = { +# include "unusual_devs.h" + { } /* Terminating entry */ +}; +EXPORT_SYMBOL_GPL(usb_storage_usb_ids); + +MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids); + +#undef UNUSUAL_DEV +#undef COMPLIANT_DEV +#undef USUAL_DEV + + +/* + * The table of devices to ignore + */ +struct ignore_entry { + u16 vid, pid, bcdmin, bcdmax; +}; + +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ \ + .vid = id_vendor, \ + .pid = id_product, \ + .bcdmin = bcdDeviceMin, \ + .bcdmax = bcdDeviceMax, \ +} + +static struct ignore_entry ignore_ids[] = { +# include "unusual_alauda.h" +# include "unusual_cypress.h" +# include "unusual_datafab.h" +# include "unusual_freecom.h" +# include "unusual_isd200.h" +# include "unusual_jumpshot.h" +# include "unusual_karma.h" +# include "unusual_onetouch.h" +# include "unusual_sddr09.h" +# include "unusual_sddr55.h" +# include "unusual_usbat.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +/* Return an error if a device is in the ignore_ids list */ +int usb_usual_ignore_device(struct usb_interface *intf) +{ + struct usb_device *udev; + unsigned vid, pid, bcd; + struct ignore_entry *p; + + udev = interface_to_usbdev(intf); + vid = le16_to_cpu(udev->descriptor.idVendor); + pid = le16_to_cpu(udev->descriptor.idProduct); + bcd = le16_to_cpu(udev->descriptor.bcdDevice); + + for (p = ignore_ids; p->vid; ++p) { + if (p->vid == vid && p->pid == pid && + p->bcdmin <= bcd && p->bcdmax >= bcd) + return -ENXIO; + } + return 0; +} +EXPORT_SYMBOL_GPL(usb_usual_ignore_device); |