diff options
Diffstat (limited to 'drivers/usb/storage')
-rw-r--r-- | drivers/usb/storage/freecom.c | 14 | ||||
-rw-r--r-- | drivers/usb/storage/isd200.c | 66 | ||||
-rw-r--r-- | drivers/usb/storage/protocol.c | 126 | ||||
-rw-r--r-- | drivers/usb/storage/scsiglue.c | 24 | ||||
-rw-r--r-- | drivers/usb/storage/sddr09.c | 9 | ||||
-rw-r--r-- | drivers/usb/storage/shuttle_usbat.c | 68 | ||||
-rw-r--r-- | drivers/usb/storage/transport.c | 45 | ||||
-rw-r--r-- | drivers/usb/storage/transport.h | 2 |
8 files changed, 178 insertions, 176 deletions
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index 88aa59ab7563..f5a4e8d6a3b1 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -132,8 +132,7 @@ freecom_readdata (struct scsi_cmnd *srb, struct us_data *us, /* Now transfer all of our blocks. */ US_DEBUGP("Start of read\n"); - result = usb_stor_bulk_transfer_sg(us, ipipe, srb->request_buffer, - count, srb->use_sg, &srb->resid); + result = usb_stor_bulk_srb(us, ipipe, srb); US_DEBUGP("freecom_readdata done!\n"); if (result > USB_STOR_XFER_SHORT) @@ -166,8 +165,7 @@ freecom_writedata (struct scsi_cmnd *srb, struct us_data *us, /* Now transfer all of our blocks. */ US_DEBUGP("Start of write\n"); - result = usb_stor_bulk_transfer_sg(us, opipe, srb->request_buffer, - count, srb->use_sg, &srb->resid); + result = usb_stor_bulk_srb(us, opipe, srb); US_DEBUGP("freecom_writedata done!\n"); if (result > USB_STOR_XFER_SHORT) @@ -281,7 +279,7 @@ int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) * and such will hang. */ US_DEBUGP("Device indicates that it has %d bytes available\n", le16_to_cpu (fst->Count)); - US_DEBUGP("SCSI requested %d\n", srb->request_bufflen); + US_DEBUGP("SCSI requested %d\n", scsi_bufflen(srb)); /* Find the length we desire to read. */ switch (srb->cmnd[0]) { @@ -292,12 +290,12 @@ int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) length = le16_to_cpu(fst->Count); break; default: - length = srb->request_bufflen; + length = scsi_bufflen(srb); } /* verify that this amount is legal */ - if (length > srb->request_bufflen) { - length = srb->request_bufflen; + if (length > scsi_bufflen(srb)) { + length = scsi_bufflen(srb); US_DEBUGP("Truncating request to match buffer length: %d\n", length); } diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 49ba6c0ff1e8..178e8c2a8a2f 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -49,6 +49,7 @@ #include <linux/slab.h> #include <linux/hdreg.h> #include <linux/ide.h> +#include <linux/scatterlist.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -287,6 +288,7 @@ struct isd200_info { /* maximum number of LUNs supported */ unsigned char MaxLUNs; struct scsi_cmnd srb; + struct scatterlist sg; }; @@ -398,6 +400,31 @@ static void isd200_build_sense(struct us_data *us, struct scsi_cmnd *srb) * Transport routines ***********************************************************************/ +/************************************************************************** + * isd200_set_srb(), isd200_srb_set_bufflen() + * + * Two helpers to facilitate in initialization of scsi_cmnd structure + * Will need to change when struct scsi_cmnd changes + */ +static void isd200_set_srb(struct isd200_info *info, + enum dma_data_direction dir, void* buff, unsigned bufflen) +{ + struct scsi_cmnd *srb = &info->srb; + + if (buff) + sg_init_one(&info->sg, buff, bufflen); + + srb->sc_data_direction = dir; + srb->request_buffer = buff ? &info->sg : NULL; + srb->request_bufflen = bufflen; + srb->use_sg = buff ? 1 : 0; +} + +static void isd200_srb_set_bufflen(struct scsi_cmnd *srb, unsigned bufflen) +{ + srb->request_bufflen = bufflen; +} + /************************************************************************** * isd200_action @@ -432,9 +459,7 @@ static int isd200_action( struct us_data *us, int action, ata.generic.RegisterSelect = REG_CYLINDER_LOW | REG_CYLINDER_HIGH | REG_STATUS | REG_ERROR; - srb->sc_data_direction = DMA_FROM_DEVICE; - srb->request_buffer = pointer; - srb->request_bufflen = value; + isd200_set_srb(info, DMA_FROM_DEVICE, pointer, value); break; case ACTION_ENUM: @@ -444,7 +469,7 @@ static int isd200_action( struct us_data *us, int action, ACTION_SELECT_5; ata.generic.RegisterSelect = REG_DEVICE_HEAD; ata.write.DeviceHeadByte = value; - srb->sc_data_direction = DMA_NONE; + isd200_set_srb(info, DMA_NONE, NULL, 0); break; case ACTION_RESET: @@ -453,7 +478,7 @@ static int isd200_action( struct us_data *us, int action, ACTION_SELECT_3|ACTION_SELECT_4; ata.generic.RegisterSelect = REG_DEVICE_CONTROL; ata.write.DeviceControlByte = ATA_DC_RESET_CONTROLLER; - srb->sc_data_direction = DMA_NONE; + isd200_set_srb(info, DMA_NONE, NULL, 0); break; case ACTION_REENABLE: @@ -462,7 +487,7 @@ static int isd200_action( struct us_data *us, int action, ACTION_SELECT_3|ACTION_SELECT_4; ata.generic.RegisterSelect = REG_DEVICE_CONTROL; ata.write.DeviceControlByte = ATA_DC_REENABLE_CONTROLLER; - srb->sc_data_direction = DMA_NONE; + isd200_set_srb(info, DMA_NONE, NULL, 0); break; case ACTION_SOFT_RESET: @@ -471,21 +496,20 @@ static int isd200_action( struct us_data *us, int action, ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND; ata.write.DeviceHeadByte = info->DeviceHead; ata.write.CommandByte = WIN_SRST; - srb->sc_data_direction = DMA_NONE; + isd200_set_srb(info, DMA_NONE, NULL, 0); break; case ACTION_IDENTIFY: US_DEBUGP(" isd200_action(IDENTIFY)\n"); ata.generic.RegisterSelect = REG_COMMAND; ata.write.CommandByte = WIN_IDENTIFY; - srb->sc_data_direction = DMA_FROM_DEVICE; - srb->request_buffer = (void *) info->id; - srb->request_bufflen = sizeof(struct hd_driveid); + isd200_set_srb(info, DMA_FROM_DEVICE, info->id, + sizeof(struct hd_driveid)); break; default: US_DEBUGP("Error: Undefined action %d\n",action); - break; + return ISD200_ERROR; } memcpy(srb->cmnd, &ata, sizeof(ata.generic)); @@ -590,7 +614,7 @@ static void isd200_invoke_transport( struct us_data *us, return; } - if ((srb->resid > 0) && + if ((scsi_get_resid(srb) > 0) && !((srb->cmnd[0] == REQUEST_SENSE) || (srb->cmnd[0] == INQUIRY) || (srb->cmnd[0] == MODE_SENSE) || @@ -1217,7 +1241,6 @@ static int isd200_get_inquiry_data( struct us_data *us ) return(retStatus); } - /************************************************************************** * isd200_scsi_to_ata * @@ -1266,7 +1289,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->generic.TransferBlockSize = 1; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; - srb->request_bufflen = 0; + isd200_srb_set_bufflen(srb, 0); } else { US_DEBUGP(" Media Status not supported, just report okay\n"); srb->result = SAM_STAT_GOOD; @@ -1284,7 +1307,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->generic.TransferBlockSize = 1; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; - srb->request_bufflen = 0; + isd200_srb_set_bufflen(srb, 0); } else { US_DEBUGP(" Media Status not supported, just report okay\n"); srb->result = SAM_STAT_GOOD; @@ -1390,7 +1413,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = (srb->cmnd[4] & 0x1) ? WIN_DOORLOCK : WIN_DOORUNLOCK; - srb->request_bufflen = 0; + isd200_srb_set_bufflen(srb, 0); } else { US_DEBUGP(" Not removeable media, just report okay\n"); srb->result = SAM_STAT_GOOD; @@ -1416,7 +1439,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->generic.TransferBlockSize = 1; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; - srb->request_bufflen = 0; + isd200_srb_set_bufflen(srb, 0); } else { US_DEBUGP(" Nothing to do, just report okay\n"); srb->result = SAM_STAT_GOOD; @@ -1525,7 +1548,7 @@ int isd200_Initialization(struct us_data *us) void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) { - int sendToTransport = 1; + int sendToTransport = 1, orig_bufflen; union ata_cdb ataCdb; /* Make sure driver was initialized */ @@ -1533,11 +1556,14 @@ void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) if (us->extra == NULL) US_DEBUGP("ERROR Driver not initialized\n"); - /* Convert command */ - srb->resid = 0; + scsi_set_resid(srb, 0); + /* scsi_bufflen might change in protocol translation to ata */ + orig_bufflen = scsi_bufflen(srb); sendToTransport = isd200_scsi_to_ata(srb, us, &ataCdb); /* send the command to the transport layer */ if (sendToTransport) isd200_invoke_transport(us, srb, &ataCdb); + + isd200_srb_set_bufflen(srb, orig_bufflen); } diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c index 889622baac20..a41ce21c0697 100644 --- a/drivers/usb/storage/protocol.c +++ b/drivers/usb/storage/protocol.c @@ -149,11 +149,7 @@ void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb, ***********************************************************************/ /* Copy a buffer of length buflen to/from the srb's transfer buffer. - * (Note: for scatter-gather transfers (srb->use_sg > 0), srb->request_buffer - * points to a list of s-g entries and we ignore srb->request_bufflen. - * For non-scatter-gather transfers, srb->request_buffer points to the - * transfer buffer itself and srb->request_bufflen is the buffer's length.) - * Update the *index and *offset variables so that the next copy will + * Update the **sgptr and *offset variables so that the next copy will * pick up from where this one left off. */ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, @@ -162,80 +158,64 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, { unsigned int cnt; - /* If not using scatter-gather, just transfer the data directly. - * Make certain it will fit in the available buffer space. */ - if (srb->use_sg == 0) { - if (*offset >= srb->request_bufflen) - return 0; - cnt = min(buflen, srb->request_bufflen - *offset); - if (dir == TO_XFER_BUF) - memcpy((unsigned char *) srb->request_buffer + *offset, - buffer, cnt); - else - memcpy(buffer, (unsigned char *) srb->request_buffer + - *offset, cnt); - *offset += cnt; - - /* Using scatter-gather. We have to go through the list one entry + /* We have to go through the list one entry * at a time. Each s-g entry contains some number of pages, and * each page has to be kmap()'ed separately. If the page is already * in kernel-addressable memory then kmap() will return its address. * If the page is not directly accessible -- such as a user buffer * located in high memory -- then kmap() will map it to a temporary * position in the kernel's virtual address space. */ - } else { - struct scatterlist *sg = *sgptr; - - if (!sg) - sg = (struct scatterlist *) srb->request_buffer; - - /* This loop handles a single s-g list entry, which may - * include multiple pages. Find the initial page structure - * and the starting offset within the page, and update - * the *offset and *index values for the next loop. */ - cnt = 0; - while (cnt < buflen) { - struct page *page = sg_page(sg) + - ((sg->offset + *offset) >> PAGE_SHIFT); - unsigned int poff = - (sg->offset + *offset) & (PAGE_SIZE-1); - unsigned int sglen = sg->length - *offset; - - if (sglen > buflen - cnt) { - - /* Transfer ends within this s-g entry */ - sglen = buflen - cnt; - *offset += sglen; - } else { - - /* Transfer continues to next s-g entry */ - *offset = 0; - sg = sg_next(sg); - } - - /* Transfer the data for all the pages in this - * s-g entry. For each page: call kmap(), do the - * transfer, and call kunmap() immediately after. */ - while (sglen > 0) { - unsigned int plen = min(sglen, (unsigned int) - PAGE_SIZE - poff); - unsigned char *ptr = kmap(page); - - if (dir == TO_XFER_BUF) - memcpy(ptr + poff, buffer + cnt, plen); - else - memcpy(buffer + cnt, ptr + poff, plen); - kunmap(page); - - /* Start at the beginning of the next page */ - poff = 0; - ++page; - cnt += plen; - sglen -= plen; - } + struct scatterlist *sg = *sgptr; + + if (!sg) + sg = scsi_sglist(srb); + + /* This loop handles a single s-g list entry, which may + * include multiple pages. Find the initial page structure + * and the starting offset within the page, and update + * the *offset and **sgptr values for the next loop. */ + cnt = 0; + while (cnt < buflen) { + struct page *page = sg_page(sg) + + ((sg->offset + *offset) >> PAGE_SHIFT); + unsigned int poff = + (sg->offset + *offset) & (PAGE_SIZE-1); + unsigned int sglen = sg->length - *offset; + + if (sglen > buflen - cnt) { + + /* Transfer ends within this s-g entry */ + sglen = buflen - cnt; + *offset += sglen; + } else { + + /* Transfer continues to next s-g entry */ + *offset = 0; + sg = sg_next(sg); + } + + /* Transfer the data for all the pages in this + * s-g entry. For each page: call kmap(), do the + * transfer, and call kunmap() immediately after. */ + while (sglen > 0) { + unsigned int plen = min(sglen, (unsigned int) + PAGE_SIZE - poff); + unsigned char *ptr = kmap(page); + + if (dir == TO_XFER_BUF) + memcpy(ptr + poff, buffer + cnt, plen); + else + memcpy(buffer + cnt, ptr + poff, plen); + kunmap(page); + + /* Start at the beginning of the next page */ + poff = 0; + ++page; + cnt += plen; + sglen -= plen; } - *sgptr = sg; } + *sgptr = sg; /* Return the amount actually transferred */ return cnt; @@ -251,6 +231,6 @@ void usb_stor_set_xfer_buf(unsigned char *buffer, usb_stor_access_xfer_buf(buffer, buflen, srb, &sg, &offset, TO_XFER_BUF); - if (buflen < srb->request_bufflen) - srb->resid = srb->request_bufflen - buflen; + if (buflen < scsi_bufflen(srb)) + scsi_set_resid(srb, scsi_bufflen(srb) - buflen); } diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 7c9593b7b04e..8c1e2954f3b9 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -81,6 +81,16 @@ static int slave_alloc (struct scsi_device *sdev) */ sdev->inquiry_len = 36; + /* Scatter-gather buffers (all but the last) must have a length + * divisible by the bulk maxpacket size. Otherwise a data packet + * would end up being short, causing a premature end to the data + * transfer. Since high-speed bulk pipes have a maxpacket size + * of 512, we'll use that as the scsi device queue's DMA alignment + * mask. Guaranteeing proper alignment of the first buffer will + * have the desired effect because, except at the beginning and + * the end, scatter-gather buffers follow page boundaries. */ + blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); + /* * The UFI spec treates the Peripheral Qualifier bits in an * INQUIRY result as reserved and requires devices to set them @@ -100,16 +110,6 @@ static int slave_configure(struct scsi_device *sdev) { struct us_data *us = host_to_us(sdev->host); - /* Scatter-gather buffers (all but the last) must have a length - * divisible by the bulk maxpacket size. Otherwise a data packet - * would end up being short, causing a premature end to the data - * transfer. Since high-speed bulk pipes have a maxpacket size - * of 512, we'll use that as the scsi device queue's DMA alignment - * mask. Guaranteeing proper alignment of the first buffer will - * have the desired effect because, except at the beginning and - * the end, scatter-gather buffers follow page boundaries. */ - blk_queue_dma_alignment(sdev->request_queue, (512 - 1)); - /* Many devices have trouble transfering more than 32KB at a time, * while others have trouble with more than 64K. At this time we * are limiting both to 32K (64 sectores). @@ -187,6 +187,10 @@ static int slave_configure(struct scsi_device *sdev) * automatically, requiring a START-STOP UNIT command. */ sdev->allow_restart = 1; + /* Some USB cardreaders have trouble reading an sdcard's last + * sector in a larger then 1 sector read, since the performance + * impact is negible we set this flag for all USB disks */ + sdev->last_sector_bug = 1; } else { /* Non-disk-type devices don't need to blacklist any pages diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index b12202c5da2d..8972b17da843 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -1623,7 +1623,7 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_ERROR; } - if (srb->request_bufflen == 0) + if (scsi_bufflen(srb) == 0) return USB_STOR_TRANSPORT_GOOD; if (srb->sc_data_direction == DMA_TO_DEVICE || @@ -1634,12 +1634,9 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) US_DEBUGP("SDDR09: %s %d bytes\n", (srb->sc_data_direction == DMA_TO_DEVICE) ? "sending" : "receiving", - srb->request_bufflen); + scsi_bufflen(srb)); - result = usb_stor_bulk_transfer_sg(us, pipe, - srb->request_buffer, - srb->request_bufflen, - srb->use_sg, &srb->resid); + result = usb_stor_bulk_srb(us, pipe, srb); return (result == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index cb22a9ad1694..570c1250f6f3 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -130,7 +130,7 @@ static int usbat_write(struct us_data *us, * Convenience function to perform a bulk read */ static int usbat_bulk_read(struct us_data *us, - unsigned char *data, + void* buf, unsigned int len, int use_sg) { @@ -138,14 +138,14 @@ static int usbat_bulk_read(struct us_data *us, return USB_STOR_XFER_GOOD; US_DEBUGP("usbat_bulk_read: len = %d\n", len); - return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, data, len, use_sg, NULL); + return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL); } /* * Convenience function to perform a bulk write */ static int usbat_bulk_write(struct us_data *us, - unsigned char *data, + void* buf, unsigned int len, int use_sg) { @@ -153,7 +153,7 @@ static int usbat_bulk_write(struct us_data *us, return USB_STOR_XFER_GOOD; US_DEBUGP("usbat_bulk_write: len = %d\n", len); - return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, data, len, use_sg, NULL); + return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL); } /* @@ -314,7 +314,7 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes) * Read block data from the data register */ static int usbat_read_block(struct us_data *us, - unsigned char *content, + void* buf, unsigned short len, int use_sg) { @@ -337,7 +337,7 @@ static int usbat_read_block(struct us_data *us, if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - result = usbat_bulk_read(us, content, len, use_sg); + result = usbat_bulk_read(us, buf, len, use_sg); return (result == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); } @@ -347,7 +347,7 @@ static int usbat_read_block(struct us_data *us, */ static int usbat_write_block(struct us_data *us, unsigned char access, - unsigned char *content, + void* buf, unsigned short len, int minutes, int use_sg) @@ -372,7 +372,7 @@ static int usbat_write_block(struct us_data *us, if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - result = usbat_bulk_write(us, content, len, use_sg); + result = usbat_bulk_write(us, buf, len, use_sg); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -392,7 +392,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, unsigned char timeout, unsigned char qualifier, int direction, - unsigned char *content, + void *buf, unsigned short len, int use_sg, int minutes) @@ -472,7 +472,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, } result = usb_stor_bulk_transfer_sg(us, - pipe, content, len, use_sg, NULL); + pipe, buf, len, use_sg, NULL); /* * If we get a stall on the bulk download, we'll retry @@ -606,7 +606,7 @@ static int usbat_multiple_write(struct us_data *us, * other related details) are defined beforehand with _set_shuttle_features(). */ static int usbat_read_blocks(struct us_data *us, - unsigned char *buffer, + void* buffer, int len, int use_sg) { @@ -648,7 +648,7 @@ static int usbat_read_blocks(struct us_data *us, * other related details) are defined beforehand with _set_shuttle_features(). */ static int usbat_write_blocks(struct us_data *us, - unsigned char *buffer, + void* buffer, int len, int use_sg) { @@ -1170,15 +1170,15 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, US_DEBUGP("handle_read10: transfersize %d\n", srb->transfersize); - if (srb->request_bufflen < 0x10000) { + if (scsi_bufflen(srb) < 0x10000) { result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, registers, data, 19, USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), DMA_FROM_DEVICE, - srb->request_buffer, - srb->request_bufflen, srb->use_sg, 1); + scsi_sglist(srb), + scsi_bufflen(srb), scsi_sg_count(srb), 1); return result; } @@ -1196,7 +1196,7 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, len <<= 16; len |= data[7+7]; US_DEBUGP("handle_read10: GPCMD_READ_CD: len %d\n", len); - srb->transfersize = srb->request_bufflen/len; + srb->transfersize = scsi_bufflen(srb)/len; } if (!srb->transfersize) { @@ -1213,7 +1213,7 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, len = (65535/srb->transfersize) * srb->transfersize; US_DEBUGP("Max read is %d bytes\n", len); - len = min(len, srb->request_bufflen); + len = min(len, scsi_bufflen(srb)); buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) /* bloody hell! */ return USB_STOR_TRANSPORT_FAILED; @@ -1222,10 +1222,10 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, sector |= short_pack(data[7+5], data[7+4]); transferred = 0; - while (transferred != srb->request_bufflen) { + while (transferred != scsi_bufflen(srb)) { - if (len > srb->request_bufflen - transferred) - len = srb->request_bufflen - transferred; + if (len > scsi_bufflen(srb) - transferred) + len = scsi_bufflen(srb) - transferred; data[3] = len&0xFF; /* (cylL) = expected length (L) */ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ @@ -1261,7 +1261,7 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, transferred += len; sector += len / srb->transfersize; - } /* while transferred != srb->request_bufflen */ + } /* while transferred != scsi_bufflen(srb) */ kfree(buffer); return result; @@ -1429,9 +1429,8 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) unsigned char data[32]; unsigned int len; int i; - char string[64]; - len = srb->request_bufflen; + len = scsi_bufflen(srb); /* Send A0 (ATA PACKET COMMAND). Note: I guess we're never going to get any of the ATA @@ -1472,8 +1471,8 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), DMA_TO_DEVICE, - srb->request_buffer, - len, srb->use_sg, 10); + scsi_sglist(srb), + len, scsi_sg_count(srb), 10); if (result == USB_STOR_TRANSPORT_GOOD) { transferred += len; @@ -1540,23 +1539,8 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) len = *status; - result = usbat_read_block(us, srb->request_buffer, len, srb->use_sg); - - /* Debug-print the first 32 bytes of the transfer */ - - if (!srb->use_sg) { - string[0] = 0; - for (i=0; i<len && i<32; i++) { - sprintf(string+strlen(string), "%02X ", - ((unsigned char *)srb->request_buffer)[i]); - if ((i%16)==15) { - US_DEBUGP("%s\n", string); - string[0] = 0; - } - } - if (string[0]!=0) - US_DEBUGP("%s\n", string); - } + result = usbat_read_block(us, scsi_sglist(srb), len, + scsi_sg_count(srb)); } return result; diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index c646750ccc30..d9f4912f873d 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -459,6 +459,22 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe, } /* + * Common used function. Transfer a complete command + * via usb_stor_bulk_transfer_sglist() above. Set cmnd resid + */ +int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe, + struct scsi_cmnd* srb) +{ + unsigned int partial; + int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb), + scsi_sg_count(srb), scsi_bufflen(srb), + &partial); + + scsi_set_resid(srb, scsi_bufflen(srb) - partial); + return result; +} + +/* * Transfer an entire SCSI command's worth of data payload over the bulk * pipe. * @@ -508,7 +524,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) int result; /* send the command to the transport layer */ - srb->resid = 0; + scsi_set_resid(srb, 0); result = us->transport(srb, us); /* if the command gets aborted by the higher layers, we need to @@ -568,7 +584,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) * A short transfer on a command where we don't expect it * is unusual, but it doesn't mean we need to auto-sense. */ - if ((srb->resid > 0) && + if ((scsi_get_resid(srb) > 0) && !((srb->cmnd[0] == REQUEST_SENSE) || (srb->cmnd[0] == INQUIRY) || (srb->cmnd[0] == MODE_SENSE) || @@ -593,7 +609,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) srb->cmd_len = 12; /* issue the auto-sense command */ - srb->resid = 0; + scsi_set_resid(srb, 0); temp_result = us->transport(us->srb, us); /* let's clean up right away */ @@ -649,7 +665,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) /* Did we transfer less than the minimum amount required? */ if (srb->result == SAM_STAT_GOOD && - srb->request_bufflen - srb->resid < srb->underflow) + scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow) srb->result = (DID_ERROR << 16) | (SUGGEST_RETRY << 24); return; @@ -708,7 +724,7 @@ void usb_stor_stop_transport(struct us_data *us) int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us) { - unsigned int transfer_length = srb->request_bufflen; + unsigned int transfer_length = scsi_bufflen(srb); unsigned int pipe = 0; int result; @@ -737,9 +753,7 @@ int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us) if (transfer_length) { pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? us->recv_bulk_pipe : us->send_bulk_pipe; - result = usb_stor_bulk_transfer_sg(us, pipe, - srb->request_buffer, transfer_length, - srb->use_sg, &srb->resid); + result = usb_stor_bulk_srb(us, pipe, srb); US_DEBUGP("CBI data stage result is 0x%x\n", result); /* if we stalled the data transfer it means command failed */ @@ -808,7 +822,7 @@ int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us) */ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) { - unsigned int transfer_length = srb->request_bufflen; + unsigned int transfer_length = scsi_bufflen(srb); int result; /* COMMAND STAGE */ @@ -836,9 +850,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) if (transfer_length) { unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? us->recv_bulk_pipe : us->send_bulk_pipe; - result = usb_stor_bulk_transfer_sg(us, pipe, - srb->request_buffer, transfer_length, - srb->use_sg, &srb->resid); + result = usb_stor_bulk_srb(us, pipe, srb); US_DEBUGP("CB data stage result is 0x%x\n", result); /* if we stalled the data transfer it means command failed */ @@ -904,7 +916,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) { struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; - unsigned int transfer_length = srb->request_bufflen; + unsigned int transfer_length = scsi_bufflen(srb); unsigned int residue; int result; int fake_sense = 0; @@ -955,9 +967,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) if (transfer_length) { unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? us->recv_bulk_pipe : us->send_bulk_pipe; - result = usb_stor_bulk_transfer_sg(us, pipe, - srb->request_buffer, transfer_length, - srb->use_sg, &srb->resid); + result = usb_stor_bulk_srb(us, pipe, srb); US_DEBUGP("Bulk data transfer result 0x%x\n", result); if (result == USB_STOR_XFER_ERROR) return USB_STOR_TRANSPORT_ERROR; @@ -1036,7 +1046,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) if (residue) { if (!(us->flags & US_FL_IGNORE_RESIDUE)) { residue = min(residue, transfer_length); - srb->resid = max(srb->resid, (int) residue); + scsi_set_resid(srb, max(scsi_get_resid(srb), + (int) residue)); } } diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h index 633a715850a4..ada7c2f43f84 100644 --- a/drivers/usb/storage/transport.h +++ b/drivers/usb/storage/transport.h @@ -139,6 +139,8 @@ extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, void *buf, unsigned int length, unsigned int *act_len); extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe, void *buf, unsigned int length, int use_sg, int *residual); +extern int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe, + struct scsi_cmnd* srb); extern int usb_stor_port_reset(struct us_data *us); #endif |