summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/chipidea/udc.c4
-rw-r--r--drivers/usb/core/driver.c24
-rw-r--r--drivers/usb/core/hcd.c1
-rw-r--r--drivers/usb/core/hub.c7
-rw-r--r--drivers/usb/core/usb.h1
-rw-r--r--drivers/usb/dwc2/core.c2
-rw-r--r--drivers/usb/dwc2/hcd.c11
-rw-r--r--drivers/usb/dwc2/platform.c3
-rw-r--r--drivers/usb/gadget/bcm63xx_udc.c58
-rw-r--r--drivers/usb/gadget/f_fs.c7
-rw-r--r--drivers/usb/gadget/printer.c2
-rw-r--r--drivers/usb/gadget/s3c2410_udc.c2
-rw-r--r--drivers/usb/host/ehci-hub.c26
-rw-r--r--drivers/usb/host/xhci-dbg.c6
-rw-r--r--drivers/usb/host/xhci-mem.c14
-rw-r--r--drivers/usb/host/xhci-pci.c5
-rw-r--r--drivers/usb/host/xhci-ring.c68
-rw-r--r--drivers/usb/host/xhci.c38
-rw-r--r--drivers/usb/host/xhci.h41
-rw-r--r--drivers/usb/musb/musb_core.c15
-rw-r--r--drivers/usb/musb/musb_host.c3
-rw-r--r--drivers/usb/musb/musb_virthub.c26
-rw-r--r--drivers/usb/musb/omap2430.c2
-rw-r--r--drivers/usb/phy/phy-msm-usb.c57
-rw-r--r--drivers/usb/phy/phy.c8
-rw-r--r--drivers/usb/serial/ftdi_sio.c3
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h7
-rw-r--r--drivers/usb/serial/option.c6
-rw-r--r--drivers/usb/serial/qcserial.c3
-rw-r--r--drivers/usb/serial/usb-serial-simple.c3
-rw-r--r--drivers/usb/storage/Kconfig4
-rw-r--r--drivers/usb/storage/scsiglue.c6
-rw-r--r--drivers/usb/storage/unusual_cypress.h2
-rw-r--r--drivers/usb/storage/unusual_devs.h7
34 files changed, 263 insertions, 209 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 80de2f88ed2c..4ab2cb62dfce 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -105,7 +105,7 @@ static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
do {
/* flush any pending transfer */
- hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n));
+ hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n));
while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
cpu_relax();
} while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
@@ -205,7 +205,7 @@ static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
return -EAGAIN;
- hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n));
+ hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n));
while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
cpu_relax();
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 5d01558cef66..ab90a0156828 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -63,8 +63,10 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids,
dynid->id.idProduct = idProduct;
dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
if (fields > 2 && bInterfaceClass) {
- if (bInterfaceClass > 255)
- return -EINVAL;
+ if (bInterfaceClass > 255) {
+ retval = -EINVAL;
+ goto fail;
+ }
dynid->id.bInterfaceClass = (u8)bInterfaceClass;
dynid->id.match_flags |= USB_DEVICE_ID_MATCH_INT_CLASS;
@@ -73,17 +75,21 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids,
if (fields > 4) {
const struct usb_device_id *id = id_table;
- if (!id)
- return -ENODEV;
+ if (!id) {
+ retval = -ENODEV;
+ goto fail;
+ }
for (; id->match_flags; id++)
if (id->idVendor == refVendor && id->idProduct == refProduct)
break;
- if (id->match_flags)
+ if (id->match_flags) {
dynid->id.driver_info = id->driver_info;
- else
- return -ENODEV;
+ } else {
+ retval = -ENODEV;
+ goto fail;
+ }
}
spin_lock(&dynids->lock);
@@ -95,6 +101,10 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids,
if (retval)
return retval;
return count;
+
+fail:
+ kfree(dynid);
+ return retval;
}
EXPORT_SYMBOL_GPL(usb_store_new_id);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 199aaea6bfe0..2518c3250750 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1032,7 +1032,6 @@ static int register_root_hub(struct usb_hcd *hcd)
dev_name(&usb_dev->dev), retval);
return retval;
}
- usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
}
retval = usb_new_device (usb_dev);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index babba885978d..64ea21971be2 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -128,7 +128,7 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
return usb_get_intfdata(hdev->actconfig->interface[0]);
}
-int usb_device_supports_lpm(struct usb_device *udev)
+static int usb_device_supports_lpm(struct usb_device *udev)
{
/* USB 2.1 (and greater) devices indicate LPM support through
* their USB 2.0 Extended Capabilities BOS descriptor.
@@ -149,11 +149,6 @@ int usb_device_supports_lpm(struct usb_device *udev)
"Power management will be impacted.\n");
return 0;
}
-
- /* udev is root hub */
- if (!udev->parent)
- return 1;
-
if (udev->parent->lpm_capable)
return 1;
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index c49383669cd8..823857767a16 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -35,7 +35,6 @@ extern int usb_get_device_descriptor(struct usb_device *dev,
unsigned int size);
extern int usb_get_bos_descriptor(struct usb_device *dev);
extern void usb_release_bos_descriptor(struct usb_device *dev);
-extern int usb_device_supports_lpm(struct usb_device *udev);
extern char *usb_cache_string(struct usb_device *udev, int index);
extern int usb_set_configuration(struct usb_device *dev, int configuration);
extern int usb_choose_configuration(struct usb_device *udev);
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 8565d87f94b4..1d129884cc39 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -216,7 +216,7 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
int retval = 0;
if (!select_phy)
- return -ENODEV;
+ return 0;
usbcfg = readl(hsotg->regs + GUSBCFG);
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index f59484d43b35..4d918ed8d343 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -2565,25 +2565,14 @@ static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd,
struct usb_host_endpoint *ep)
{
struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
- int is_control = usb_endpoint_xfer_control(&ep->desc);
- int is_out = usb_endpoint_dir_out(&ep->desc);
- int epnum = usb_endpoint_num(&ep->desc);
- struct usb_device *udev;
unsigned long flags;
dev_dbg(hsotg->dev,
"DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n",
ep->desc.bEndpointAddress);
- udev = to_usb_device(hsotg->dev);
-
spin_lock_irqsave(&hsotg->lock, flags);
-
- usb_settoggle(udev, epnum, is_out, 0);
- if (is_control)
- usb_settoggle(udev, epnum, !is_out, 0);
dwc2_hcd_endpoint_reset(hsotg, ep);
-
spin_unlock_irqrestore(&hsotg->lock, flags);
}
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index d01d0d3f2cf0..eaba547ce26b 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -124,6 +124,9 @@ static int dwc2_driver_probe(struct platform_device *dev)
int retval;
int irq;
+ if (usb_disabled())
+ return -ENODEV;
+
match = of_match_device(dwc2_of_match_table, &dev->dev);
if (match && match->data) {
params = match->data;
diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c
index 888fbb43b338..e969eb809a85 100644
--- a/drivers/usb/gadget/bcm63xx_udc.c
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -360,24 +360,30 @@ static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
bcm_writel(val, udc->iudma_regs + off);
}
-static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off)
+static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan)
{
- return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
+ return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
+ (ENETDMA_CHAN_WIDTH * chan));
}
-static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
+ int chan)
{
- bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
+ bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
+ (ENETDMA_CHAN_WIDTH * chan));
}
-static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off)
+static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan)
{
- return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
+ return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
+ (ENETDMA_CHAN_WIDTH * chan));
}
-static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
+ int chan)
{
- bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
+ bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
+ (ENETDMA_CHAN_WIDTH * chan));
}
static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
@@ -638,7 +644,7 @@ static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma,
} while (!last_bd);
usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
- ENETDMAC_CHANCFG_REG(iudma->ch_idx));
+ ENETDMAC_CHANCFG_REG, iudma->ch_idx);
}
/**
@@ -694,9 +700,9 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));
/* stop DMA, then wait for the hardware to wrap up */
- usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx));
+ usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx);
- while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) &
+ while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) &
ENETDMAC_CHANCFG_EN_MASK) {
udelay(1);
@@ -713,10 +719,10 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n",
ch_idx);
usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
- ENETDMAC_CHANCFG_REG(ch_idx));
+ ENETDMAC_CHANCFG_REG, ch_idx);
}
}
- usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx));
+ usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx);
/* don't leave "live" HW-owned entries for the next guy to step on */
for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
@@ -728,11 +734,11 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
/* set up IRQs, UBUS burst size, and BD base for this channel */
usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
- ENETDMAC_IRMASK_REG(ch_idx));
- usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx));
+ ENETDMAC_IRMASK_REG, ch_idx);
+ usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx);
- usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx));
- usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx));
+ usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx);
+ usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx);
}
/**
@@ -2035,7 +2041,7 @@ static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id)
spin_lock(&udc->lock);
usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
- ENETDMAC_IR_REG(iudma->ch_idx));
+ ENETDMAC_IR_REG, iudma->ch_idx);
bep = iudma->bep;
rc = iudma_read(udc, iudma);
@@ -2175,18 +2181,18 @@ static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p)
seq_printf(s, " [ep%d]:\n",
max_t(int, iudma_defaults[ch_idx].ep_num, 0));
seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n",
- usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)),
- usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)),
- usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)),
- usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx)));
+ usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx),
+ usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx),
+ usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx),
+ usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx));
- sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx));
- sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx));
+ sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx);
+ sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx);
seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n",
- usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)),
+ usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx),
sram2 >> 16, sram2 & 0xffff,
sram3 >> 16, sram3 & 0xffff,
- usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx)));
+ usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx));
seq_printf(s, " desc: %d/%d used", iudma->n_bds_used,
iudma->n_bds);
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 306a2b52125c..2b4334394076 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -585,7 +585,6 @@ static ssize_t ffs_epfile_io(struct file *file,
char __user *buf, size_t len, int read)
{
struct ffs_epfile *epfile = file->private_data;
- struct usb_gadget *gadget = epfile->ffs->gadget;
struct ffs_ep *ep;
char *data = NULL;
ssize_t ret, data_len;
@@ -622,6 +621,12 @@ static ssize_t ffs_epfile_io(struct file *file,
/* Allocate & copy */
if (!halt) {
/*
+ * if we _do_ wait above, the epfile->ffs->gadget might be NULL
+ * before the waiting completes, so do not assign to 'gadget' earlier
+ */
+ struct usb_gadget *gadget = epfile->ffs->gadget;
+
+ /*
* Controller may require buffer size to be aligned to
* maxpacketsize of an out endpoint.
*/
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index bf7a56b6d48a..69b76efd11e9 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -1157,7 +1157,7 @@ static int __init printer_bind_config(struct usb_configuration *c)
usb_gadget_set_selfpowered(gadget);
- if (gadget->is_otg) {
+ if (gadget_is_otg(gadget)) {
otg_descriptor.bmAttributes |= USB_OTG_HNP;
printer_cfg_driver.descriptors = otg_desc;
printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index f04b2c3154de..dd9678f85c58 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1629,7 +1629,7 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev)
ep->ep.desc = NULL;
ep->halted = 0;
INIT_LIST_HEAD(&ep->queue);
- usb_ep_set_maxpacket_limit(&ep->ep, &ep->ep.maxpacket);
+ usb_ep_set_maxpacket_limit(&ep->ep, ep->ep.maxpacket);
}
}
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 47b858fc50b2..7ae0c4d51741 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -238,6 +238,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
int port;
int mask;
int changed;
+ bool fs_idle_delay;
ehci_dbg(ehci, "suspend root hub\n");
@@ -272,6 +273,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
ehci->bus_suspended = 0;
ehci->owned_ports = 0;
changed = 0;
+ fs_idle_delay = false;
port = HCS_N_PORTS(ehci->hcs_params);
while (port--) {
u32 __iomem *reg = &ehci->regs->port_status [port];
@@ -300,16 +302,32 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
}
if (t1 != t2) {
+ /*
+ * On some controllers, Wake-On-Disconnect will
+ * generate false wakeup signals until the bus
+ * switches over to full-speed idle. For their
+ * sake, add a delay if we need one.
+ */
+ if ((t2 & PORT_WKDISC_E) &&
+ ehci_port_speed(ehci, t2) ==
+ USB_PORT_STAT_HIGH_SPEED)
+ fs_idle_delay = true;
ehci_writel(ehci, t2, reg);
changed = 1;
}
}
+ spin_unlock_irq(&ehci->lock);
+
+ if ((changed && ehci->has_tdi_phy_lpm) || fs_idle_delay) {
+ /*
+ * Wait for HCD to enter low-power mode or for the bus
+ * to switch to full-speed idle.
+ */
+ usleep_range(5000, 5500);
+ }
if (changed && ehci->has_tdi_phy_lpm) {
- spin_unlock_irq(&ehci->lock);
- msleep(5); /* 5 ms for HCD to enter low-power mode */
spin_lock_irq(&ehci->lock);
-
port = HCS_N_PORTS(ehci->hcs_params);
while (port--) {
u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port];
@@ -322,8 +340,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
port, (t3 & HOSTPC_PHCD) ?
"succeeded" : "failed");
}
+ spin_unlock_irq(&ehci->lock);
}
- spin_unlock_irq(&ehci->lock);
/* Apparently some devices need a >= 1-uframe delay here */
if (ehci->bus_suspended)
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index b016d38199f2..eb009a457fb5 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -203,12 +203,12 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num)
addr, (unsigned int)temp);
addr = &ir_set->erst_base;
- temp_64 = readq(addr);
+ temp_64 = xhci_read_64(xhci, addr);
xhci_dbg(xhci, " %p: ir_set.erst_base = @%08llx\n",
addr, temp_64);
addr = &ir_set->erst_dequeue;
- temp_64 = readq(addr);
+ temp_64 = xhci_read_64(xhci, addr);
xhci_dbg(xhci, " %p: ir_set.erst_dequeue = @%08llx\n",
addr, temp_64);
}
@@ -412,7 +412,7 @@ void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci)
{
u64 val;
- val = readq(&xhci->op_regs->cmd_ring);
+ val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n",
lower_32_bits(val));
xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n",
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 873c272b3ef5..bce4391a0e7d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1958,7 +1958,7 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
xhci_warn(xhci, "WARN something wrong with SW event ring "
"dequeue ptr.\n");
/* Update HC event ring dequeue pointer */
- temp = readq(&xhci->ir_set->erst_dequeue);
+ temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
temp &= ERST_PTR_MASK;
/* Don't clear the EHB bit (which is RW1C) because
* there might be more events to service.
@@ -1967,7 +1967,7 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Write event ring dequeue pointer, "
"preserving EHB bit");
- writeq(((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+ xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
&xhci->ir_set->erst_dequeue);
}
@@ -2269,7 +2269,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Device context base array address = 0x%llx (DMA), %p (virt)",
(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
- writeq(dma, &xhci->op_regs->dcbaa_ptr);
+ xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
/*
* Initialize the ring segment pool. The ring must be a contiguous
@@ -2312,13 +2312,13 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
(unsigned long long)xhci->cmd_ring->first_seg->dma);
/* Set the address in the Command Ring Control register */
- val_64 = readq(&xhci->op_regs->cmd_ring);
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
(xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
xhci->cmd_ring->cycle_state;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Setting command ring address to 0x%x", val);
- writeq(val_64, &xhci->op_regs->cmd_ring);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
xhci_dbg_cmd_ptrs(xhci);
xhci->lpm_command = xhci_alloc_command(xhci, true, true, flags);
@@ -2396,10 +2396,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Set ERST base address for ir_set 0 = 0x%llx",
(unsigned long long)xhci->erst.erst_dma_addr);
- val_64 = readq(&xhci->ir_set->erst_base);
+ val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
val_64 &= ERST_PTR_MASK;
val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
- writeq(val_64, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
/* Set the event ring dequeue address */
xhci_set_hc_event_deq(xhci);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 3c898c12a06b..04f986d9234f 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -142,6 +142,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
"QUIRK: Resetting on resume");
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
}
+ if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+ pdev->device == 0x0015 &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
+ pdev->subsystem_device == 0xc0cd)
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
if (pdev->vendor == PCI_VENDOR_ID_VIA)
xhci->quirks |= XHCI_RESET_ON_RESUME;
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a0b248c34526..0ed64eb68e48 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -307,13 +307,14 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
return 0;
}
- temp_64 = readq(&xhci->op_regs->cmd_ring);
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
if (!(temp_64 & CMD_RING_RUNNING)) {
xhci_dbg(xhci, "Command ring had been stopped\n");
return 0;
}
xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
- writeq(temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
+ xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
+ &xhci->op_regs->cmd_ring);
/* Section 4.6.1.2 of xHCI 1.0 spec says software should
* time the completion od all xHCI commands, including
@@ -2864,8 +2865,9 @@ hw_died:
/* Clear the event handler busy flag (RW1C);
* the event ring should be empty.
*/
- temp_64 = readq(&xhci->ir_set->erst_dequeue);
- writeq(temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB,
+ &xhci->ir_set->erst_dequeue);
spin_unlock(&xhci->lock);
return IRQ_HANDLED;
@@ -2877,7 +2879,7 @@ hw_died:
*/
while (xhci_handle_event(xhci) > 0) {}
- temp_64 = readq(&xhci->ir_set->erst_dequeue);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
/* If necessary, update the HW's version of the event ring deq ptr. */
if (event_ring_deq != xhci->event_ring->dequeue) {
deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
@@ -2892,7 +2894,7 @@ hw_died:
/* Clear the event handler busy flag (RW1C); event ring is empty. */
temp_64 |= ERST_EHB;
- writeq(temp_64, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
spin_unlock(&xhci->lock);
@@ -2965,58 +2967,8 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
}
while (1) {
- if (room_on_ring(xhci, ep_ring, num_trbs)) {
- union xhci_trb *trb = ep_ring->enqueue;
- unsigned int usable = ep_ring->enq_seg->trbs +
- TRBS_PER_SEGMENT - 1 - trb;
- u32 nop_cmd;
-
- /*
- * Section 4.11.7.1 TD Fragments states that a link
- * TRB must only occur at the boundary between
- * data bursts (eg 512 bytes for 480M).
- * While it is possible to split a large fragment
- * we don't know the size yet.
- * Simplest solution is to fill the trb before the
- * LINK with nop commands.
- */
- if (num_trbs == 1 || num_trbs <= usable || usable == 0)
- break;
-
- if (ep_ring->type != TYPE_BULK)
- /*
- * While isoc transfers might have a buffer that
- * crosses a 64k boundary it is unlikely.
- * Since we can't add NOPs without generating
- * gaps in the traffic just hope it never
- * happens at the end of the ring.
- * This could be fixed by writing a LINK TRB
- * instead of the first NOP - however the
- * TRB_TYPE_LINK_LE32() calls would all need
- * changing to check the ring length.
- */
- break;
-
- if (num_trbs >= TRBS_PER_SEGMENT) {
- xhci_err(xhci, "Too many fragments %d, max %d\n",
- num_trbs, TRBS_PER_SEGMENT - 1);
- return -EINVAL;
- }
-
- nop_cmd = cpu_to_le32(TRB_TYPE(TRB_TR_NOOP) |
- ep_ring->cycle_state);
- ep_ring->num_trbs_free -= usable;
- do {
- trb->generic.field[0] = 0;
- trb->generic.field[1] = 0;
- trb->generic.field[2] = 0;
- trb->generic.field[3] = nop_cmd;
- trb++;
- } while (--usable);
- ep_ring->enqueue = trb;
- if (room_on_ring(xhci, ep_ring, num_trbs))
- break;
- }
+ if (room_on_ring(xhci, ep_ring, num_trbs))
+ break;
if (ep_ring == xhci->cmd_ring) {
xhci_err(xhci, "Do not support expand command ring\n");
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ad364394885a..6fe577d46fa2 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -611,7 +611,7 @@ int xhci_run(struct usb_hcd *hcd)
xhci_dbg(xhci, "Event ring:\n");
xhci_debug_ring(xhci, xhci->event_ring);
xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
- temp_64 = readq(&xhci->ir_set->erst_dequeue);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
temp_64 &= ~ERST_PTR_MASK;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"ERST deq = 64'h%0lx", (long unsigned int) temp_64);
@@ -756,11 +756,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci)
{
xhci->s3.command = readl(&xhci->op_regs->command);
xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification);
- xhci->s3.dcbaa_ptr = readq(&xhci->op_regs->dcbaa_ptr);
+ xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
xhci->s3.config_reg = readl(&xhci->op_regs->config_reg);
xhci->s3.erst_size = readl(&xhci->ir_set->erst_size);
- xhci->s3.erst_base = readq(&xhci->ir_set->erst_base);
- xhci->s3.erst_dequeue = readq(&xhci->ir_set->erst_dequeue);
+ xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+ xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
xhci->s3.irq_pending = readl(&xhci->ir_set->irq_pending);
xhci->s3.irq_control = readl(&xhci->ir_set->irq_control);
}
@@ -769,11 +769,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
{
writel(xhci->s3.command, &xhci->op_regs->command);
writel(xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
- writeq(xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
+ xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
writel(xhci->s3.config_reg, &xhci->op_regs->config_reg);
writel(xhci->s3.erst_size, &xhci->ir_set->erst_size);
- writeq(xhci->s3.erst_base, &xhci->ir_set->erst_base);
- writeq(xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
writel(xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
writel(xhci->s3.irq_control, &xhci->ir_set->irq_control);
}
@@ -783,7 +783,7 @@ static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
u64 val_64;
/* step 2: initialize command ring buffer */
- val_64 = readq(&xhci->op_regs->cmd_ring);
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
(xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
xhci->cmd_ring->dequeue) &
@@ -792,7 +792,7 @@ static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Setting command ring address to 0x%llx",
(long unsigned long) val_64);
- writeq(val_64, &xhci->op_regs->cmd_ring);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
}
/*
@@ -3842,7 +3842,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
if (ret) {
return ret;
}
- temp_64 = readq(&xhci->op_regs->dcbaa_ptr);
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"Op regs DCBAA ptr = %#016llx", temp_64);
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
@@ -4730,11 +4730,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
struct device *dev = hcd->self.controller;
int retval;
- /* Limit the block layer scatter-gather lists to half a segment. */
- hcd->self.sg_tablesize = TRBS_PER_SEGMENT / 2;
-
- /* support to build packet from discontinuous buffers */
- hcd->self.no_sg_constraint = 1;
+ /* Accept arbitrarily long scatter-gather lists */
+ hcd->self.sg_tablesize = ~0;
/* XHCI controllers don't stop the ep queue on short packets :| */
hcd->self.no_stop_on_short = 1;
@@ -4760,6 +4757,14 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
/* xHCI private pointer was set in xhci_pci_probe for the second
* registered roothub.
*/
+ xhci = hcd_to_xhci(hcd);
+ /*
+ * Support arbitrarily aligned sg-list entries on hosts without
+ * TD fragment rules (which are currently unsupported).
+ */
+ if (xhci->hci_version < 0x100)
+ hcd->self.no_sg_constraint = 1;
+
return 0;
}
@@ -4788,6 +4793,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
if (xhci->hci_version > 0x96)
xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+ if (xhci->hci_version < 0x100)
+ hcd->self.no_sg_constraint = 1;
+
/* Make sure the HC is halted. */
retval = xhci_halt(xhci);
if (retval)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index f8416639bf31..58ed9d088e63 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -28,17 +28,6 @@
#include <linux/kernel.h>
#include <linux/usb/hcd.h>
-/*
- * Registers should always be accessed with double word or quad word accesses.
- *
- * Some xHCI implementations may support 64-bit address pointers. Registers
- * with 64-bit address pointers should be written to with dword accesses by
- * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
- * xHCI implementations that do not support 64-bit address pointers will ignore
- * the high dword, and write order is irrelevant.
- */
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
-
/* Code sharing between pci-quirks and xhci hcd */
#include "xhci-ext-caps.h"
#include "pci-quirks.h"
@@ -1279,7 +1268,7 @@ union xhci_trb {
* since the command ring is 64-byte aligned.
* It must also be greater than 16.
*/
-#define TRBS_PER_SEGMENT 256
+#define TRBS_PER_SEGMENT 64
/* Allow two commands + a link TRB, along with any reserved command TRBs */
#define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3)
#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
@@ -1614,6 +1603,34 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
#define xhci_warn_ratelimited(xhci, fmt, args...) \
dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers. Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
+ __le64 __iomem *regs)
+{
+ __u32 __iomem *ptr = (__u32 __iomem *) regs;
+ u64 val_lo = readl(ptr);
+ u64 val_hi = readl(ptr + 1);
+ return val_lo + (val_hi << 32);
+}
+static inline void xhci_write_64(struct xhci_hcd *xhci,
+ const u64 val, __le64 __iomem *regs)
+{
+ __u32 __iomem *ptr = (__u32 __iomem *) regs;
+ u32 val_lo = lower_32_bits(val);
+ u32 val_hi = upper_32_bits(val);
+
+ writel(val_lo, ptr);
+ writel(val_hi, ptr + 1);
+}
+
static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
{
return xhci->quirks & XHCI_LINK_TRB_QUIRK;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index fc192ad9cc6a..239ad0b1ceb6 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -477,8 +477,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
musb->port1_status |=
(USB_PORT_STAT_C_SUSPEND << 16)
| MUSB_PORT_STAT_RESUME;
+ musb->rh_timer = jiffies
+ + msecs_to_jiffies(20);
schedule_delayed_work(
- &musb->finish_resume_work, 20);
+ &musb->finish_resume_work,
+ msecs_to_jiffies(20));
musb->xceiv->state = OTG_STATE_A_HOST;
musb->is_active = 1;
@@ -2157,11 +2160,19 @@ static void musb_restore_context(struct musb *musb)
void __iomem *musb_base = musb->mregs;
void __iomem *ep_target_regs;
void __iomem *epio;
+ u8 power;
musb_writew(musb_base, MUSB_FRAME, musb->context.frame);
musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl);
- musb_writeb(musb_base, MUSB_POWER, musb->context.power);
+
+ /* Don't affect SUSPENDM/RESUME bits in POWER reg */
+ power = musb_readb(musb_base, MUSB_POWER);
+ power &= MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME;
+ musb->context.power &= ~(MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME);
+ power |= musb->context.power;
+ musb_writeb(musb_base, MUSB_POWER, power);
+
musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe);
musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe);
musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index ed455724017b..abb38c3833ef 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1183,6 +1183,9 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
csr = MUSB_CSR0_H_STATUSPKT
| MUSB_CSR0_TXPKTRDY;
+ /* disable ping token in status phase */
+ csr |= MUSB_CSR0_H_DIS_PING;
+
/* flag status stage */
musb->ep0_stage = MUSB_EP0_STATUS;
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index eb634433ef09..e2d2d8c9891b 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -135,7 +135,8 @@ void musb_port_suspend(struct musb *musb, bool do_suspend)
/* later, GetPortStatus will stop RESUME signaling */
musb->port1_status |= MUSB_PORT_STAT_RESUME;
- schedule_delayed_work(&musb->finish_resume_work, 20);
+ schedule_delayed_work(&musb->finish_resume_work,
+ msecs_to_jiffies(20));
}
}
@@ -158,7 +159,6 @@ void musb_port_reset(struct musb *musb, bool do_reset)
*/
power = musb_readb(mbase, MUSB_POWER);
if (do_reset) {
-
/*
* If RESUME is set, we must make sure it stays minimum 20 ms.
* Then we must clear RESUME and wait a bit to let musb start
@@ -167,11 +167,22 @@ void musb_port_reset(struct musb *musb, bool do_reset)
* detected".
*/
if (power & MUSB_POWER_RESUME) {
- while (time_before(jiffies, musb->rh_timer))
- msleep(1);
+ long remain = (unsigned long) musb->rh_timer - jiffies;
+
+ if (musb->rh_timer > 0 && remain > 0) {
+ /* take into account the minimum delay after resume */
+ schedule_delayed_work(
+ &musb->deassert_reset_work, remain);
+ return;
+ }
+
musb_writeb(mbase, MUSB_POWER,
- power & ~MUSB_POWER_RESUME);
- msleep(1);
+ power & ~MUSB_POWER_RESUME);
+
+ /* Give the core 1 ms to clear MUSB_POWER_RESUME */
+ schedule_delayed_work(&musb->deassert_reset_work,
+ msecs_to_jiffies(1));
+ return;
}
power &= 0xf0;
@@ -180,7 +191,8 @@ void musb_port_reset(struct musb *musb, bool do_reset)
musb->port1_status |= USB_PORT_STAT_RESET;
musb->port1_status &= ~USB_PORT_STAT_ENABLE;
- schedule_delayed_work(&musb->deassert_reset_work, 50);
+ schedule_delayed_work(&musb->deassert_reset_work,
+ msecs_to_jiffies(50));
} else {
dev_dbg(musb->controller, "root port reset stopped\n");
musb_writeb(mbase, MUSB_POWER,
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 2a408cdaf7b2..8aa59a2c5eb2 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -659,7 +659,6 @@ static int omap2430_runtime_suspend(struct device *dev)
OTG_INTERFSEL);
omap2430_low_level_exit(musb);
- phy_power_off(musb->phy);
}
return 0;
@@ -674,7 +673,6 @@ static int omap2430_runtime_resume(struct device *dev)
omap2430_low_level_init(musb);
musb_writel(musb->mregs, OTG_INTERFSEL,
musb->context.otg_interfsel);
- phy_power_on(musb->phy);
}
return 0;
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 8546c8dccd51..d204f745ed05 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -159,32 +159,6 @@ put_3p3:
return rc;
}
-#ifdef CONFIG_PM_SLEEP
-#define USB_PHY_SUSP_DIG_VOL 500000
-static int msm_hsusb_config_vddcx(int high)
-{
- int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
- int min_vol;
- int ret;
-
- if (high)
- min_vol = USB_PHY_VDD_DIG_VOL_MIN;
- else
- min_vol = USB_PHY_SUSP_DIG_VOL;
-
- ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
- if (ret) {
- pr_err("%s: unable to set the voltage for regulator "
- "HSUSB_VDDCX\n", __func__);
- return ret;
- }
-
- pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
-
- return ret;
-}
-#endif
-
static int msm_hsusb_ldo_set_mode(int on)
{
int ret = 0;
@@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy)
#define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000)
#define PHY_RESUME_TIMEOUT_USEC (100 * 1000)
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
+
+#define USB_PHY_SUSP_DIG_VOL 500000
+static int msm_hsusb_config_vddcx(int high)
+{
+ int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
+ int min_vol;
+ int ret;
+
+ if (high)
+ min_vol = USB_PHY_VDD_DIG_VOL_MIN;
+ else
+ min_vol = USB_PHY_SUSP_DIG_VOL;
+
+ ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
+ if (ret) {
+ pr_err("%s: unable to set the voltage for regulator "
+ "HSUSB_VDDCX\n", __func__);
+ return ret;
+ }
+
+ pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
+
+ return ret;
+}
+
static int msm_otg_suspend(struct msm_otg *motg)
{
struct usb_phy *phy = &motg->phy;
@@ -1733,22 +1732,18 @@ static int msm_otg_pm_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM
static const struct dev_pm_ops msm_otg_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume)
SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume,
msm_otg_runtime_idle)
};
-#endif
static struct platform_driver msm_otg_driver = {
.remove = msm_otg_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
-#ifdef CONFIG_PM
.pm = &msm_otg_dev_pm_ops,
-#endif
},
};
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index e6f61e4361df..8afa813d690b 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -130,7 +130,7 @@ struct usb_phy *usb_get_phy(enum usb_phy_type type)
phy = __usb_find_phy(&phy_list, type);
if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
- pr_err("unable to find transceiver of type %s\n",
+ pr_debug("PHY: unable to find transceiver of type %s\n",
usb_phy_type_string(type));
goto err0;
}
@@ -228,7 +228,7 @@ struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
- pr_err("unable to find transceiver\n");
+ dev_dbg(dev, "unable to find transceiver\n");
goto err0;
}
@@ -424,10 +424,8 @@ int usb_bind_phy(const char *dev_name, u8 index,
unsigned long flags;
phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
- if (!phy_bind) {
- pr_err("phy_bind(): No memory for phy_bind");
+ if (!phy_bind)
return -ENOMEM;
- }
phy_bind->dev_name = dev_name;
phy_bind->phy_dev_name = phy_dev_name;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ce0d7b0db012..ee1f00f03c43 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -152,6 +152,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -191,6 +192,8 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
+ { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_LP101_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_P200X_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index a7019d1e3058..1e2d369df86e 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -50,6 +50,7 @@
#define TI_XDS100V2_PID 0xa6d0
#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
+#define FTDI_EV3CON_PID 0xABB9 /* Mindstorms EV3 Console Adapter */
/* US Interface Navigator (http://www.usinterface.com/) */
#define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */
@@ -363,6 +364,12 @@
/* Sprog II (Andrew Crosland's SprogII DCC interface) */
#define FTDI_SPROG_II 0xF0C8
+/*
+ * Two of the Tagsys RFID Readers
+ */
+#define FTDI_TAGSYS_LP101_PID 0xF0E9 /* Tagsys L-P101 RFID*/
+#define FTDI_TAGSYS_P200X_PID 0xF0EE /* Tagsys Medio P200x RFID*/
+
/* an infrared receiver for user access control with IR tags */
#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5c86f57e4afa..68fc9fe65936 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1362,7 +1362,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1267, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) },
@@ -1525,7 +1526,8 @@ static const struct usb_device_id option_ids[] = {
/* Cinterion */
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
- { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index c65437cfd4a2..968a40201e5f 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -139,6 +139,9 @@ static const struct usb_device_id id_table[] = {
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)}, /* Sierra Wireless EM7700 Device Management */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)}, /* Sierra Wireless EM7700 NMEA */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)}, /* Sierra Wireless EM7700 Modem */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)}, /* Netgear AirCard 340U Device Management */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)}, /* Netgear AirCard 340U NMEA */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)}, /* Netgear AirCard 340U Modem */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index f112b079ddfc..fb79775447b0 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -71,7 +71,8 @@ DEVICE(hp4x, HP4X_IDS);
/* Suunto ANT+ USB Driver */
#define SUUNTO_IDS() \
- { USB_DEVICE(0x0fcf, 0x1008) }
+ { USB_DEVICE(0x0fcf, 0x1008) }, \
+ { USB_DEVICE(0x0fcf, 0x1009) } /* Dynastream ANT USB-m Stick */
DEVICE(suunto, SUUNTO_IDS);
/* Siemens USB/MPI adapter */
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 8470e1b114f2..1dd0604d1911 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -18,7 +18,9 @@ config USB_STORAGE
This option depends on 'SCSI' support being enabled, but you
probably also need 'SCSI device support: SCSI disk support'
- (BLK_DEV_SD) for most USB storage devices.
+ (BLK_DEV_SD) for most USB storage devices. Some devices also
+ will require 'Probe all LUNs on each SCSI device'
+ (SCSI_MULTI_LUN).
To compile this driver as a module, choose M here: the
module will be called usb-storage.
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 18509e6c21ab..9d38ddc8da49 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -78,6 +78,8 @@ static const char* host_info(struct Scsi_Host *host)
static int slave_alloc (struct scsi_device *sdev)
{
+ struct us_data *us = host_to_us(sdev->host);
+
/*
* Set the INQUIRY transfer length to 36. We don't use any of
* the extra data and many devices choke if asked for more or
@@ -102,6 +104,10 @@ static int slave_alloc (struct scsi_device *sdev)
*/
blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
+ /* Tell the SCSI layer if we know there is more than one LUN */
+ if (us->protocol == USB_PR_BULK && us->max_lun > 0)
+ sdev->sdev_bflags |= BLIST_FORCELUN;
+
return 0;
}
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index 65a6a75066a8..82e8ed0324e3 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -31,7 +31,7 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999,
"Cypress ISD-300LP",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
-UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x0219,
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0160, 0x0160,
"Super Top",
"USB 2.0 SATA BRIDGE",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index ad06255c2ade..adbeb255616a 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1455,6 +1455,13 @@ UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> */
+UNUSUAL_DEV( 0x0fca, 0x8004, 0x0201, 0x0201,
+ "Research In Motion",
+ "BlackBerry Bold 9000",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/* Reported by Michael Stattmann <michael@stattmann.com> */
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
"Sony Ericsson",