diff options
Diffstat (limited to 'drivers/usb')
90 files changed, 1606 insertions, 1253 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 7fdbc5dad5fd..005043197527 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -23,7 +23,8 @@ config USB_ARCH_HAS_OHCI default y if ARCH_LH7A404 default y if ARCH_S3C2410 default y if PXA27x - default y if ARCH_AT91RM9200 + default y if ARCH_EP93XX + default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261) # PPC: default y if STB03xxx default y if PPC_MPC52xx diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index c7123bf71c58..4710eb02ed64 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -48,7 +48,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB_AUERSWALD) += misc/ -obj-$(CONFIG_USB_CY7C63) += misc/ +obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/ obj-$(CONFIG_USB_CYTHERM) += misc/ obj-$(CONFIG_USB_EMI26) += misc/ obj-$(CONFIG_USB_EMI62) += misc/ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 3670d77e912c..ca90326f2f5c 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -291,13 +291,13 @@ static void acm_read_bulk(struct urb *urb, struct pt_regs *regs) struct acm_ru *rcv = urb->context; struct acm *acm = rcv->instance; int status = urb->status; - dbg("Entering acm_read_bulk with status %d\n", urb->status); + dbg("Entering acm_read_bulk with status %d", urb->status); if (!ACM_READY(acm)) return; if (status) - dev_dbg(&acm->data->dev, "bulk rx status %d\n", status); + dev_dbg(&acm->data->dev, "bulk rx status %d", status); buf = rcv->buffer; buf->size = urb->actual_length; @@ -343,7 +343,7 @@ next_buffer: list_del(&buf->list); spin_unlock(&acm->read_lock); - dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d\n", buf, buf->size); + dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size); tty_buffer_request_room(tty, buf->size); if (!acm->throttle) @@ -394,7 +394,7 @@ urbs: rcv->urb->transfer_dma = buf->dma; rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p\n", rcv->urb, rcv, buf); + dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p", rcv->urb, rcv, buf); /* This shouldn't kill the driver as unsuccessful URBs are returned to the free-urbs-pool and resubmited ASAP */ @@ -413,7 +413,7 @@ static void acm_write_bulk(struct urb *urb, struct pt_regs *regs) { struct acm *acm = (struct acm *)urb->context; - dbg("Entering acm_write_bulk with status %d\n", urb->status); + dbg("Entering acm_write_bulk with status %d", urb->status); acm_write_done(acm); acm_write_start(acm); @@ -424,7 +424,7 @@ static void acm_write_bulk(struct urb *urb, struct pt_regs *regs) static void acm_softint(void *private) { struct acm *acm = private; - dbg("Entering acm_softint.\n"); + dbg("Entering acm_softint."); if (!ACM_READY(acm)) return; @@ -440,7 +440,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) struct acm *acm; int rv = -EINVAL; int i; - dbg("Entering acm_tty_open.\n"); + dbg("Entering acm_tty_open."); mutex_lock(&open_mutex); @@ -541,7 +541,7 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c int wbn; struct acm_wb *wb; - dbg("Entering acm_tty_write to write %d bytes,\n", count); + dbg("Entering acm_tty_write to write %d bytes,", count); if (!ACM_READY(acm)) return -EINVAL; @@ -793,7 +793,7 @@ static int acm_probe (struct usb_interface *intf, if (!buflen) { if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) { - dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n"); + dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint"); buflen = intf->cur_altsetting->endpoint->extralen; buffer = intf->cur_altsetting->endpoint->extra; } else { @@ -842,24 +842,24 @@ next_desc: if (!union_header) { if (call_interface_num > 0) { - dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n"); + dev_dbg(&intf->dev,"No union descriptor, using call management descriptor"); data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num)); control_interface = intf; } else { - dev_dbg(&intf->dev,"No union descriptor, giving up\n"); + dev_dbg(&intf->dev,"No union descriptor, giving up"); return -ENODEV; } } else { control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0); data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0)); if (!control_interface || !data_interface) { - dev_dbg(&intf->dev,"no interfaces\n"); + dev_dbg(&intf->dev,"no interfaces"); return -ENODEV; } } if (data_interface_num != call_interface_num) - dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n"); + dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported."); skip_normal_probe: @@ -867,7 +867,7 @@ skip_normal_probe: if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) { if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) { struct usb_interface *t; - dev_dbg(&intf->dev,"Your device has switched interfaces.\n"); + dev_dbg(&intf->dev,"Your device has switched interfaces."); t = control_interface; control_interface = data_interface; @@ -878,7 +878,7 @@ skip_normal_probe: } if (usb_interface_claimed(data_interface)) { /* valid in this context */ - dev_dbg(&intf->dev,"The data interface isn't available\n"); + dev_dbg(&intf->dev,"The data interface isn't available"); return -EBUSY; } @@ -895,7 +895,7 @@ skip_normal_probe: if ((epread->bEndpointAddress & USB_DIR_IN) != USB_DIR_IN) { /* descriptors are swapped */ struct usb_endpoint_descriptor *t; - dev_dbg(&intf->dev,"The data interface has switched endpoints\n"); + dev_dbg(&intf->dev,"The data interface has switched endpoints"); t = epread; epread = epwrite; @@ -910,7 +910,7 @@ skip_normal_probe: } if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) { - dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n"); + dev_dbg(&intf->dev, "out of memory (acm kzalloc)"); goto alloc_fail; } @@ -936,26 +936,26 @@ skip_normal_probe: buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); if (!buf) { - dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n"); + dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)"); goto alloc_fail2; } acm->ctrl_buffer = buf; if (acm_write_buffers_alloc(acm) < 0) { - dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n"); + dev_dbg(&intf->dev, "out of memory (write buffer alloc)"); goto alloc_fail4; } acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL); if (!acm->ctrlurb) { - dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n"); + dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)"); goto alloc_fail5; } for (i = 0; i < num_rx_buf; i++) { struct acm_ru *rcv = &(acm->ru[i]); if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) { - dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n"); + dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)"); goto alloc_fail7; } @@ -966,13 +966,13 @@ skip_normal_probe: struct acm_rb *buf = &(acm->rb[i]); if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) { - dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n"); + dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)"); goto alloc_fail7; } } acm->writeurb = usb_alloc_urb(0, GFP_KERNEL); if (!acm->writeurb) { - dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)\n"); + dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)"); goto alloc_fail7; } @@ -1086,6 +1086,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */ .driver_info = SINGLE_RX_URB, /* firmware bug */ }, + { USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */ + .driver_info = SINGLE_RX_URB, /* firmware bug */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_ACM_PROTO_AT_V25TER) }, diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index a08787e253aa..6e3b5358a760 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -31,9 +31,6 @@ config USB_DEVICEFS For the format of the various /proc/bus/usb/ files, please read <file:Documentation/usb/proc_usb_info.txt>. - Please note that this code is completely unrelated to devfs, the - "/dev file system support". - Most users want to say Y here. config USB_BANDWIDTH diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index f7bdd94b3aa8..218621b9958e 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -517,19 +517,19 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig static struct usb_device *usbdev_lookup_minor(int minor) { - struct device *device; - struct usb_device *udev = NULL; + struct class_device *class_dev; + struct usb_device *dev = NULL; down(&usb_device_class->sem); - list_for_each_entry(device, &usb_device_class->devices, node) { - if (device->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { - udev = device->platform_data; + list_for_each_entry(class_dev, &usb_device_class->children, node) { + if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { + dev = class_dev->class_data; break; } } up(&usb_device_class->sem); - return udev; + return dev; }; /* @@ -1580,16 +1580,16 @@ static void usbdev_add(struct usb_device *dev) { int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); - dev->usbfs_dev = device_create(usb_device_class, &dev->dev, - MKDEV(USB_DEVICE_MAJOR, minor), + dev->class_dev = class_device_create(usb_device_class, NULL, + MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev, "usbdev%d.%d", dev->bus->busnum, dev->devnum); - dev->usbfs_dev->platform_data = dev; + dev->class_dev->class_data = dev; } static void usbdev_remove(struct usb_device *dev) { - device_unregister(dev->usbfs_dev); + class_device_unregister(dev->class_dev); } static int usbdev_notify(struct notifier_block *self, unsigned long action, diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index abee0f5b6a66..8de4f8c99d61 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -194,13 +194,14 @@ int usb_register_dev(struct usb_interface *intf, ++temp; else temp = name; - intf->usb_dev = device_create(usb_class->class, &intf->dev, - MKDEV(USB_MAJOR, minor), "%s", temp); - if (IS_ERR(intf->usb_dev)) { + intf->class_dev = class_device_create(usb_class->class, NULL, + MKDEV(USB_MAJOR, minor), + &intf->dev, "%s", temp); + if (IS_ERR(intf->class_dev)) { spin_lock (&minor_lock); usb_minors[intf->minor] = NULL; spin_unlock (&minor_lock); - retval = PTR_ERR(intf->usb_dev); + retval = PTR_ERR(intf->class_dev); } exit: return retval; @@ -241,8 +242,8 @@ void usb_deregister_dev(struct usb_interface *intf, spin_unlock (&minor_lock); snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base); - device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor)); - intf->usb_dev = NULL; + class_device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor)); + intf->class_dev = NULL; intf->minor = -1; destroy_usb_class(); } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 875596e98e42..26c8cb5f3e67 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1790,7 +1790,10 @@ static int finish_device_resume(struct usb_device *udev) * and device drivers will know about any resume quirks. */ status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus); - if (status < 2) + if (status >= 0) + status = (status == 2 ? 0 : -ENODEV); + + if (status) dev_dbg(&udev->dev, "gone after usb resume? status %d\n", status); @@ -1879,7 +1882,12 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) dev_dbg(hub->intfdev, "port %d status %04x.%04x after resume, %d\n", port1, portchange, devstatus, status); + if (status >= 0) + status = -ENODEV; } else { + if (portchange & USB_PORT_STAT_C_SUSPEND) + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_SUSPEND); /* TRSMRCY = 10 msec */ msleep(10); if (udev) diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index f48c3dbc367a..3182c2224ba2 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -695,7 +695,7 @@ static void usbfs_remove_device(struct usb_device *dev) wake_up_all(&ds->wait); list_del_init(&ds->list); if (ds->discsignr) { - sinfo.si_signo = SIGPIPE; + sinfo.si_signo = ds->discsignr; sinfo.si_errno = EPIPE; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = ds->disccontext; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 363b2ad74ae6..1a32d96774b4 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -207,7 +207,7 @@ config USB_AT91 config USB_GADGET_DUMMY_HCD boolean "Dummy HCD (DEVELOPMENT)" - depends on USB && EXPERIMENTAL + depends on (USB=y || (USB=m && USB_GADGET=m)) && EXPERIMENTAL select USB_GADGET_DUALSPEED help This host controller driver emulates USB, looping all data transfer diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 1c459ff037ce..cfebca05ead5 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -57,19 +57,23 @@ /* * This controller is simple and PIO-only. It's used in many AT91-series - * ARMv4T controllers, including the at91rm9200 (arm920T, with MMU), - * at91sam9261 (arm926ejs, with MMU), and several no-mmu versions. + * full speed USB controllers, including the at91rm9200 (arm920T, with MMU), + * at91sam926x (arm926ejs, with MMU), and several no-mmu versions. * * This driver expects the board has been wired with two GPIOs suppporting * a VBUS sensing IRQ, and a D+ pullup. (They may be omitted, but the - * testing hasn't covered such cases.) The pullup is most important; it + * testing hasn't covered such cases.) + * + * The pullup is most important (so it's integrated on sam926x parts). It * provides software control over whether the host enumerates the device. + * * The VBUS sensing helps during enumeration, and allows both USB clocks * (and the transceiver) to stay gated off until they're necessary, saving - * power. During USB suspend, the 48 MHz clock is gated off. + * power. During USB suspend, the 48 MHz clock is gated off in hardware; + * it may also be gated off by software during some Linux sleep states. */ -#define DRIVER_VERSION "8 March 2005" +#define DRIVER_VERSION "3 May 2006" static const char driver_name [] = "at91_udc"; static const char ep0name[] = "ep0"; @@ -316,9 +320,15 @@ static void done(struct at91_ep *ep, struct at91_request *req, int status) * * There are also state bits like FORCESTALL, EPEDS, DIR, and EPTYPE * that shouldn't normally be changed. + * + * NOTE at91sam9260 docs mention synch between UDPCK and MCK clock domains, + * implying a need to wait for one write to complete (test relevant bits) + * before starting the next write. This shouldn't be an issue given how + * infrequently we write, except maybe for write-then-read idioms. */ #define SET_FX (AT91_UDP_TXPKTRDY) -#define CLR_FX (RX_DATA_READY | AT91_UDP_RXSETUP | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP) +#define CLR_FX (RX_DATA_READY | AT91_UDP_RXSETUP \ + | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP) /* pull OUT packet data from the endpoint's fifo */ static int read_fifo (struct at91_ep *ep, struct at91_request *req) @@ -472,7 +482,8 @@ static void nuke(struct at91_ep *ep, int status) /*-------------------------------------------------------------------------*/ -static int at91_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +static int at91_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) { struct at91_ep *ep = container_of(_ep, struct at91_ep, ep); struct at91_udc *dev = ep->udc; @@ -582,11 +593,12 @@ static int at91_ep_disable (struct usb_ep * _ep) * interesting for request or buffer allocation. */ -static struct usb_request *at91_ep_alloc_request (struct usb_ep *_ep, unsigned int gfp_flags) +static struct usb_request * +at91_ep_alloc_request(struct usb_ep *_ep, unsigned int gfp_flags) { struct at91_request *req; - req = kcalloc(1, sizeof (struct at91_request), SLAB_KERNEL); + req = kcalloc(1, sizeof (struct at91_request), gfp_flags); if (!req) return NULL; @@ -862,6 +874,7 @@ static void stop_activity(struct at91_udc *udc) if (udc->gadget.speed == USB_SPEED_UNKNOWN) driver = NULL; udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->suspended = 0; for (i = 0; i < NUM_ENDPOINTS; i++) { struct at91_ep *ep = &udc->ep[i]; @@ -889,8 +902,8 @@ static void clk_off(struct at91_udc *udc) return; udc->clocked = 0; udc->gadget.speed = USB_SPEED_UNKNOWN; - clk_disable(udc->iclk); clk_disable(udc->fclk); + clk_disable(udc->iclk); } /* @@ -911,9 +924,6 @@ static void pullup(struct at91_udc *udc, int is_on) at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); at91_set_gpio_value(udc->board.pullup_pin, 0); clk_off(udc); - - // REVISIT: with transceiver disabled, will D- float - // so that a host would falsely detect a device? } } @@ -1290,7 +1300,8 @@ static void handle_ep0(struct at91_udc *udc) if (udc->wait_for_addr_ack) { u32 tmp; - at91_udp_write(AT91_UDP_FADDR, AT91_UDP_FEN | udc->addr); + at91_udp_write(AT91_UDP_FADDR, + AT91_UDP_FEN | udc->addr); tmp = at91_udp_read(AT91_UDP_GLB_STAT); tmp &= ~AT91_UDP_FADDEN; if (udc->addr) @@ -1361,9 +1372,10 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r) u32 rescans = 5; while (rescans--) { - u32 status = at91_udp_read(AT91_UDP_ISR); + u32 status; - status &= at91_udp_read(AT91_UDP_IMR); + status = at91_udp_read(AT91_UDP_ISR) + & at91_udp_read(AT91_UDP_IMR); if (!status) break; @@ -1379,18 +1391,17 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r) stop_activity(udc); /* enable ep0 */ - at91_udp_write(AT91_UDP_CSR(0), AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL); + at91_udp_write(AT91_UDP_CSR(0), + AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL); udc->gadget.speed = USB_SPEED_FULL; udc->suspended = 0; at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0)); /* * NOTE: this driver keeps clocks off unless the - * USB host is present. That saves power, and also - * eliminates IRQs (reset, resume, suspend) that can - * otherwise flood from the controller. If your - * board doesn't support VBUS detection, suspend and - * resume irq logic may need more attention... + * USB host is present. That saves power, but for + * boards that don't support VBUS detection, both + * clocks need to be active most of the time. */ /* host initiated suspend (3+ms bus idle) */ @@ -1452,13 +1463,19 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r) /*-------------------------------------------------------------------------*/ +static void nop_release(struct device *dev) +{ + /* nothing to free */ +} + static struct at91_udc controller = { .gadget = { - .ops = &at91_udc_ops, - .ep0 = &controller.ep[0].ep, - .name = driver_name, - .dev = { - .bus_id = "gadget" + .ops = &at91_udc_ops, + .ep0 = &controller.ep[0].ep, + .name = driver_name, + .dev = { + .bus_id = "gadget", + .release = nop_release, } }, .ep[0] = { @@ -1468,7 +1485,8 @@ static struct at91_udc controller = { }, .udc = &controller, .maxpacket = 8, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(0)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(0)), .int_mask = 1 << 0, }, .ep[1] = { @@ -1479,7 +1497,8 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 64, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(1)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(1)), .int_mask = 1 << 1, }, .ep[2] = { @@ -1490,7 +1509,8 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 64, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(2)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(2)), .int_mask = 1 << 2, }, .ep[3] = { @@ -1501,7 +1521,8 @@ static struct at91_udc controller = { }, .udc = &controller, .maxpacket = 8, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(3)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(3)), .int_mask = 1 << 3, }, .ep[4] = { @@ -1512,7 +1533,8 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 256, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(4)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(4)), .int_mask = 1 << 4, }, .ep[5] = { @@ -1523,10 +1545,11 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 256, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(5)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(5)), .int_mask = 1 << 5, }, - /* ep6 and ep7 are also reserved */ + /* ep6 and ep7 are also reserved (custom silicon might use them) */ }; static irqreturn_t at91_vbus_irq(int irq, void *_udc, struct pt_regs *r) @@ -1593,6 +1616,7 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) local_irq_disable(); udc->enabled = 0; + at91_udp_write(AT91_UDP_IDR, ~0); pullup(udc, 0); local_irq_enable(); @@ -1624,6 +1648,16 @@ static int __devinit at91udc_probe(struct platform_device *pdev) return -ENODEV; } + if (pdev->num_resources != 2) { + DBG("invalid num_resources"); + return -ENODEV; + } + if ((pdev->resource[0].flags != IORESOURCE_MEM) + || (pdev->resource[1].flags != IORESOURCE_IRQ)) { + DBG("invalid resource type"); + return -ENODEV; + } + if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) { DBG("someone's using UDC memory\n"); return -EBUSY; @@ -1649,19 +1683,26 @@ static int __devinit at91udc_probe(struct platform_device *pdev) if (retval < 0) goto fail0; - /* disable everything until there's a gadget driver and vbus */ - pullup(udc, 0); + /* don't do anything until we have both gadget driver and VBUS */ + clk_enable(udc->iclk); + at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); + at91_udp_write(AT91_UDP_IDR, 0xffffffff); + clk_disable(udc->iclk); /* request UDC and maybe VBUS irqs */ - if (request_irq(AT91_ID_UDP, at91_udc_irq, IRQF_DISABLED, driver_name, udc)) { - DBG("request irq %d failed\n", AT91_ID_UDP); + udc->udp_irq = platform_get_irq(pdev, 0); + if (request_irq(udc->udp_irq, at91_udc_irq, + IRQF_DISABLED, driver_name, udc)) { + DBG("request irq %d failed\n", udc->udp_irq); retval = -EBUSY; goto fail1; } if (udc->board.vbus_pin > 0) { - if (request_irq(udc->board.vbus_pin, at91_vbus_irq, IRQF_DISABLED, driver_name, udc)) { - DBG("request vbus irq %d failed\n", udc->board.vbus_pin); - free_irq(AT91_ID_UDP, udc); + if (request_irq(udc->board.vbus_pin, at91_vbus_irq, + IRQF_DISABLED, driver_name, udc)) { + DBG("request vbus irq %d failed\n", + udc->board.vbus_pin); + free_irq(udc->udp_irq, udc); retval = -EBUSY; goto fail1; } @@ -1670,6 +1711,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) udc->vbus = 1; } dev_set_drvdata(dev, udc); + device_init_wakeup(dev, 1); create_debug_file(udc); INFO("%s version %s\n", driver_name, DRIVER_VERSION); @@ -1678,14 +1720,14 @@ static int __devinit at91udc_probe(struct platform_device *pdev) fail1: device_unregister(&udc->gadget.dev); fail0: - release_mem_region(AT91_VA_BASE_UDP, SZ_16K); + release_mem_region(AT91_BASE_UDP, SZ_16K); DBG("%s probe failed, %d\n", driver_name, retval); return retval; } -static int __devexit at91udc_remove(struct platform_device *dev) +static int __devexit at91udc_remove(struct platform_device *pdev) { - struct at91_udc *udc = platform_get_drvdata(dev); + struct at91_udc *udc = platform_get_drvdata(pdev); DBG("remove\n"); @@ -1694,10 +1736,11 @@ static int __devexit at91udc_remove(struct platform_device *dev) if (udc->driver != 0) usb_gadget_unregister_driver(udc->driver); + device_init_wakeup(&pdev->dev, 0); remove_debug_file(udc); if (udc->board.vbus_pin > 0) free_irq(udc->board.vbus_pin, udc); - free_irq(AT91_ID_UDP, udc); + free_irq(udc->udp_irq, udc); device_unregister(&udc->gadget.dev); release_mem_region(AT91_BASE_UDP, SZ_16K); @@ -1708,31 +1751,36 @@ static int __devexit at91udc_remove(struct platform_device *dev) } #ifdef CONFIG_PM -static int at91udc_suspend(struct platform_device *dev, pm_message_t mesg) +static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg) { - struct at91_udc *udc = platform_get_drvdata(dev); + struct at91_udc *udc = platform_get_drvdata(pdev); + int wake = udc->driver && device_may_wakeup(&pdev->dev); - /* - * The "safe" suspend transitions are opportunistic ... e.g. when - * the USB link is suspended (48MHz clock autogated off), or when - * it's disconnected (programmatically gated off, elsewhere). - * Then we can suspend, and the chip can enter slow clock mode. - * - * The problem case is some component (user mode?) suspending this - * device while it's active, with the 48 MHz clock in use. There - * are two basic approaches: (a) veto suspend levels involving slow - * clock mode, (b) disconnect, so 48 MHz will no longer be in use - * and we can enter slow clock mode. This uses (b) for now, since - * it's simplest until AT91 PM exists and supports the other option. + /* Unless we can act normally to the host (letting it wake us up + * whenever it has work for us) force disconnect. Wakeup requires + * PLLB for USB events (signaling for reset, wakeup, or incoming + * tokens) and VBUS irqs (on systems which support them). */ - if (udc->vbus && !udc->suspended) + if ((!udc->suspended && udc->addr) + || !wake + || at91_suspend_entering_slow_clock()) { pullup(udc, 0); + disable_irq_wake(udc->udp_irq); + } else + enable_irq_wake(udc->udp_irq); + + if (udc->board.vbus_pin > 0) { + if (wake) + enable_irq_wake(udc->board.vbus_pin); + else + disable_irq_wake(udc->board.vbus_pin); + } return 0; } -static int at91udc_resume(struct platform_device *dev) +static int at91udc_resume(struct platform_device *pdev) { - struct at91_udc *udc = platform_get_drvdata(dev); + struct at91_udc *udc = platform_get_drvdata(pdev); /* maybe reconnect to host; if so, clocks on */ pullup(udc, 1); @@ -1748,7 +1796,7 @@ static struct platform_driver at91_udc = { .remove = __devexit_p(at91udc_remove), .shutdown = at91udc_shutdown, .suspend = at91udc_suspend, - .resume = at91udc_resume, + .resume = at91udc_resume, .driver = { .name = (char *) driver_name, .owner = THIS_MODULE, @@ -1767,6 +1815,6 @@ static void __devexit udc_exit_module(void) } module_exit(udc_exit_module); -MODULE_DESCRIPTION("AT91RM9200 udc driver"); +MODULE_DESCRIPTION("AT91 udc driver"); MODULE_AUTHOR("Thomas Rathbone, David Brownell"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index 5a4799cedd19..882af42e86cc 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -141,6 +141,7 @@ struct at91_udc { struct clk *iclk, *fclk; struct platform_device *pdev; struct proc_dir_entry *pde; + int udp_irq; }; static inline struct at91_udc *to_udc(struct usb_gadget *g) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 4be47195bd38..7d1c22c34957 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -609,7 +609,8 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) if (!dum->driver) return -ESHUTDOWN; - spin_lock_irqsave (&dum->lock, flags); + local_irq_save (flags); + spin_lock (&dum->lock); list_for_each_entry (req, &ep->queue, queue) { if (&req->req == _req) { list_del_init (&req->queue); @@ -618,7 +619,7 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) break; } } - spin_unlock_irqrestore (&dum->lock, flags); + spin_unlock (&dum->lock); if (retval == 0) { dev_dbg (udc_dev(dum), @@ -626,6 +627,7 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) req, _ep->name, _req->length, _req->buf); _req->complete (_ep, _req); } + local_irq_restore (flags); return retval; } diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index f7c6d758e1b0..53d584589c26 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -34,12 +34,12 @@ /* we must assign addresses for configurable endpoints (like net2280) */ -static __initdata unsigned epnum; +static __devinitdata unsigned epnum; // #define MANY_ENDPOINTS #ifdef MANY_ENDPOINTS /* more than 15 configurable endpoints */ -static __initdata unsigned in_epnum; +static __devinitdata unsigned in_epnum; #endif @@ -59,7 +59,7 @@ static __initdata unsigned in_epnum; * NOTE: each endpoint is unidirectional, as specified by its USB * descriptor; and isn't specific to a configuration or altsetting. */ -static int __init +static int __devinit ep_matches ( struct usb_gadget *gadget, struct usb_ep *ep, @@ -73,7 +73,7 @@ ep_matches ( /* endpoint already claimed? */ if (0 != ep->driver_data) return 0; - + /* only support ep0 for portable CONTROL traffic */ type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; if (USB_ENDPOINT_XFER_CONTROL == type) @@ -186,7 +186,7 @@ ep_matches ( return 1; } -static struct usb_ep * __init +static struct usb_ep * __devinit find_ep (struct usb_gadget *gadget, const char *name) { struct usb_ep *ep; @@ -228,7 +228,7 @@ find_ep (struct usb_gadget *gadget, const char *name) * * On failure, this returns a null endpoint descriptor. */ -struct usb_ep * __init usb_ep_autoconfig ( +struct usb_ep * __devinit usb_ep_autoconfig ( struct usb_gadget *gadget, struct usb_endpoint_descriptor *desc ) @@ -276,7 +276,7 @@ struct usb_ep * __init usb_ep_autoconfig ( return ep; } - /* Second, look at endpoints until an unclaimed one looks usable */ + /* Second, look at endpoints until an unclaimed one looks usable */ list_for_each_entry (ep, &gadget->ep_list, ep_list) { if (ep_matches (gadget, ep, desc)) return ep; @@ -295,7 +295,7 @@ struct usb_ep * __init usb_ep_autoconfig ( * state such as ep->driver_data and the record of assigned endpoints * used by usb_ep_autoconfig(). */ -void __init usb_ep_autoconfig_reset (struct usb_gadget *gadget) +void __devinit usb_ep_autoconfig_reset (struct usb_gadget *gadget) { struct usb_ep *ep; diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 8320fcef0425..30299c620d97 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -117,6 +117,8 @@ struct eth_dev { struct usb_ep *in_ep, *out_ep, *status_ep; const struct usb_endpoint_descriptor *in, *out, *status; + + spinlock_t req_lock; struct list_head tx_reqs, rx_reqs; struct net_device *net; @@ -1066,21 +1068,31 @@ static void eth_reset_config (struct eth_dev *dev) */ if (dev->in) { usb_ep_disable (dev->in_ep); + spin_lock(&dev->req_lock); while (likely (!list_empty (&dev->tx_reqs))) { req = container_of (dev->tx_reqs.next, struct usb_request, list); list_del (&req->list); + + spin_unlock(&dev->req_lock); usb_ep_free_request (dev->in_ep, req); + spin_lock(&dev->req_lock); } + spin_unlock(&dev->req_lock); } if (dev->out) { usb_ep_disable (dev->out_ep); + spin_lock(&dev->req_lock); while (likely (!list_empty (&dev->rx_reqs))) { req = container_of (dev->rx_reqs.next, struct usb_request, list); list_del (&req->list); + + spin_unlock(&dev->req_lock); usb_ep_free_request (dev->out_ep, req); + spin_lock(&dev->req_lock); } + spin_unlock(&dev->req_lock); } if (dev->status) { @@ -1659,9 +1671,9 @@ enomem: if (retval) { DEBUG (dev, "rx submit --> %d\n", retval); dev_kfree_skb_any (skb); - spin_lock (&dev->lock); + spin_lock(&dev->req_lock); list_add (&req->list, &dev->rx_reqs); - spin_unlock (&dev->lock); + spin_unlock(&dev->req_lock); } return retval; } @@ -1730,8 +1742,9 @@ quiesce: dev_kfree_skb_any (skb); if (!netif_running (dev->net)) { clean: - /* nobody reading rx_reqs, so no dev->lock */ + spin_lock(&dev->req_lock); list_add (&req->list, &dev->rx_reqs); + spin_unlock(&dev->req_lock); req = NULL; } if (req) @@ -1782,15 +1795,18 @@ static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags) { int status; + spin_lock(&dev->req_lock); status = prealloc (&dev->tx_reqs, dev->in_ep, n, gfp_flags); if (status < 0) goto fail; status = prealloc (&dev->rx_reqs, dev->out_ep, n, gfp_flags); if (status < 0) goto fail; - return 0; + goto done; fail: DEBUG (dev, "can't alloc requests\n"); +done: + spin_unlock(&dev->req_lock); return status; } @@ -1800,21 +1816,21 @@ static void rx_fill (struct eth_dev *dev, gfp_t gfp_flags) unsigned long flags; /* fill unused rxq slots with some skb */ - spin_lock_irqsave (&dev->lock, flags); + spin_lock_irqsave(&dev->req_lock, flags); while (!list_empty (&dev->rx_reqs)) { req = container_of (dev->rx_reqs.next, struct usb_request, list); list_del_init (&req->list); - spin_unlock_irqrestore (&dev->lock, flags); + spin_unlock_irqrestore(&dev->req_lock, flags); if (rx_submit (dev, req, gfp_flags) < 0) { defer_kevent (dev, WORK_RX_MEMORY); return; } - spin_lock_irqsave (&dev->lock, flags); + spin_lock_irqsave(&dev->req_lock, flags); } - spin_unlock_irqrestore (&dev->lock, flags); + spin_unlock_irqrestore(&dev->req_lock, flags); } static void eth_work (void *_dev) @@ -1848,9 +1864,9 @@ static void tx_complete (struct usb_ep *ep, struct usb_request *req) } dev->stats.tx_packets++; - spin_lock (&dev->lock); + spin_lock(&dev->req_lock); list_add (&req->list, &dev->tx_reqs); - spin_unlock (&dev->lock); + spin_unlock(&dev->req_lock); dev_kfree_skb_any (skb); atomic_dec (&dev->tx_qlen); @@ -1896,12 +1912,12 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net) /* ignores USB_CDC_PACKET_TYPE_DIRECTED */ } - spin_lock_irqsave (&dev->lock, flags); + spin_lock_irqsave(&dev->req_lock, flags); req = container_of (dev->tx_reqs.next, struct usb_request, list); list_del (&req->list); if (list_empty (&dev->tx_reqs)) netif_stop_queue (net); - spin_unlock_irqrestore (&dev->lock, flags); + spin_unlock_irqrestore(&dev->req_lock, flags); /* no buffer copies needed, unless the network stack did it * or the hardware can't use skb buffers. @@ -1955,11 +1971,11 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net) drop: dev->stats.tx_dropped++; dev_kfree_skb_any (skb); - spin_lock_irqsave (&dev->lock, flags); + spin_lock_irqsave(&dev->req_lock, flags); if (list_empty (&dev->tx_reqs)) netif_start_queue (net); list_add (&req->list, &dev->tx_reqs); - spin_unlock_irqrestore (&dev->lock, flags); + spin_unlock_irqrestore(&dev->req_lock, flags); } return 0; } @@ -2131,7 +2147,7 @@ eth_req_free (struct usb_ep *ep, struct usb_request *req) } -static void __exit +static void /* __init_or_exit */ eth_unbind (struct usb_gadget *gadget) { struct eth_dev *dev = get_gadget_data (gadget); @@ -2158,7 +2174,7 @@ eth_unbind (struct usb_gadget *gadget) set_gadget_data (gadget, NULL); } -static u8 __init nibble (unsigned char c) +static u8 __devinit nibble (unsigned char c) { if (likely (isdigit (c))) return c - '0'; @@ -2168,7 +2184,7 @@ static u8 __init nibble (unsigned char c) return 0; } -static int __init get_ether_addr(const char *str, u8 *dev_addr) +static int __devinit get_ether_addr(const char *str, u8 *dev_addr) { if (str) { unsigned i; @@ -2189,7 +2205,7 @@ static int __init get_ether_addr(const char *str, u8 *dev_addr) return 1; } -static int __init +static int __devinit eth_bind (struct usb_gadget *gadget) { struct eth_dev *dev; @@ -2378,6 +2394,7 @@ autoconf_fail: return status; dev = netdev_priv(net); spin_lock_init (&dev->lock); + spin_lock_init (&dev->req_lock); INIT_WORK (&dev->work, eth_work, dev); INIT_LIST_HEAD (&dev->tx_reqs); INIT_LIST_HEAD (&dev->rx_reqs); diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index b1a9cf06f3e6..8d7f1e84cd7b 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -3691,7 +3691,7 @@ static void lun_release(struct device *dev) kref_put(&fsg->ref, fsg_release); } -static void __exit fsg_unbind(struct usb_gadget *gadget) +static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) { struct fsg_dev *fsg = get_gadget_data(gadget); int i; diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 354670d12308..408c3380d602 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -1398,7 +1398,7 @@ static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS]; #endif /* CONFIG_USB_GADGET_DEBUG_FILES */ -int __init rndis_init (void) +int __devinit rndis_init (void) { u8 i; diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h index 2956608be751..4c3c7259f019 100644 --- a/drivers/usb/gadget/rndis.h +++ b/drivers/usb/gadget/rndis.h @@ -264,7 +264,7 @@ int rndis_signal_disconnect (int configNr); int rndis_state (int configNr); extern void rndis_set_host_mac (int configNr, const u8 *addr); -int __init rndis_init (void); +int __devinit rndis_init (void); void rndis_exit (void); #endif /* _LINUX_RNDIS_H */ diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index 30d7664d449d..e762aa19ab0a 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -1473,7 +1473,7 @@ autoconf_fail: * Called on module unload. Frees the control request and device * structure. */ -static void __exit gs_unbind(struct usb_gadget *gadget) +static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget) { struct gs_dev *dev = get_gadget_data(gadget); diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 3a08a7ab4ce0..b7018ee487ea 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -1121,7 +1121,7 @@ zero_autoresume (unsigned long _dev) /*-------------------------------------------------------------------------*/ -static void __exit +static void /* __init_or_exit */ zero_unbind (struct usb_gadget *gadget) { struct zero_dev *dev = get_gadget_data (gadget); diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index d66867aa527e..26ed757d22a6 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -41,8 +41,6 @@ #endif #define USBH_DISABLE (USB_MCFG_EBMEN | USB_MCFG_EMEMEN) -#endif /* Au1200 */ - extern int usb_disabled(void); /*-------------------------------------------------------------------------*/ @@ -107,9 +105,9 @@ int usb_ehci_au1xxx_probe(const struct hc_driver *driver, /* Au1200 AB USB does not support coherent memory */ if (!(read_c0_prid() & 0xff)) { - pr_info("%s: this is chip revision AB!\n", dev->dev.name); + pr_info("%s: this is chip revision AB!\n", dev->name); pr_info("%s: update your board or re-configure the kernel\n", - dev->dev.name); + dev->name); return -ENODEV; } #endif @@ -228,9 +226,8 @@ static const struct hc_driver ehci_au1xxx_hc_driver = { /*-------------------------------------------------------------------------*/ -static int ehci_hcd_au1xxx_drv_probe(struct device *dev) +static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) { - struct platform_device *pdev = to_platform_device(dev); struct usb_hcd *hcd = NULL; int ret; @@ -243,10 +240,9 @@ static int ehci_hcd_au1xxx_drv_probe(struct device *dev) return ret; } -static int ehci_hcd_au1xxx_drv_remove(struct device *dev) +static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev) { - struct platform_device *pdev = to_platform_device(dev); - struct usb_hcd *hcd = dev_get_drvdata(dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_ehci_au1xxx_remove(hcd, pdev); return 0; @@ -269,12 +265,13 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev) } */ MODULE_ALIAS("au1xxx-ehci"); -/* FIXME use "struct platform_driver" */ -static struct device_driver ehci_hcd_au1xxx_driver = { - .name = "au1xxx-ehci", - .bus = &platform_bus_type, +static struct platform_driver ehci_hcd_au1xxx_driver = { .probe = ehci_hcd_au1xxx_drv_probe, .remove = ehci_hcd_au1xxx_drv_remove, /*.suspend = ehci_hcd_au1xxx_drv_suspend, */ /*.resume = ehci_hcd_au1xxx_drv_resume, */ + .driver = { + .name = "au1xxx-ehci", + .bus = &platform_bus_type + } }; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index cee6f538de0a..d63177a8eaea 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -625,10 +625,11 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs) writel (status | CMD_RUN, &ehci->regs->command); while (i--) { - status = readl (&ehci->regs->port_status [i]); - if (status & PORT_OWNER) + int pstatus = readl (&ehci->regs->port_status [i]); + + if (pstatus & PORT_OWNER) continue; - if (!(status & PORT_RESUME) + if (!(pstatus & PORT_RESUME) || ehci->reset_done [i] != 0) continue; @@ -891,7 +892,7 @@ MODULE_LICENSE ("GPL"); #define PCI_DRIVER ehci_pci_driver #endif -#ifdef CONFIG_PPC_83xx +#ifdef CONFIG_MPC834x #include "ehci-fsl.c" #define PLATFORM_DRIVER ehci_fsl_driver #endif diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index cdbafb710000..85cc059705a6 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -4,7 +4,7 @@ * Copyright (C) 2004 SAN People (Pty) Ltd. * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> * - * AT91RM9200 Bus Glue + * AT91 Bus Glue * * Based on fragments of 2.4 driver by Rick Bronson. * Based on ohci-omap.c @@ -19,12 +19,13 @@ #include <asm/hardware.h> #include <asm/arch/board.h> -#ifndef CONFIG_ARCH_AT91RM9200 -#error "CONFIG_ARCH_AT91RM9200 must be defined." +#ifndef CONFIG_ARCH_AT91 +#error "CONFIG_ARCH_AT91 must be defined." #endif /* interface and function clocks */ static struct clk *iclk, *fclk; +static int clocked; extern int usb_disabled(void); @@ -35,13 +36,14 @@ static void at91_start_hc(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_regs __iomem *regs = hcd->regs; - dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n"); + dev_dbg(&pdev->dev, "start\n"); /* * Start the USB clocks. */ clk_enable(iclk); clk_enable(fclk); + clocked = 1; /* * The USB host controller must remain in reset. @@ -54,7 +56,7 @@ static void at91_stop_hc(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_regs __iomem *regs = hcd->regs; - dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n"); + dev_dbg(&pdev->dev, "stop\n"); /* * Put the USB host controller into reset. @@ -66,6 +68,7 @@ static void at91_stop_hc(struct platform_device *pdev) */ clk_disable(fclk); clk_disable(iclk); + clocked = 0; } @@ -78,14 +81,15 @@ static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); /** - * usb_hcd_at91_probe - initialize AT91RM9200-based HCDs + * usb_hcd_at91_probe - initialize AT91-based HCDs * Context: !in_interrupt() * * Allocates basic resources for this USB host controller, and * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ -int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev) +static int usb_hcd_at91_probe(const struct hc_driver *driver, + struct platform_device *pdev) { int retval; struct usb_hcd *hcd = NULL; @@ -95,12 +99,13 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device * return -ENODEV; } - if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) { + if ((pdev->resource[0].flags != IORESOURCE_MEM) + || (pdev->resource[1].flags != IORESOURCE_IRQ)) { pr_debug("hcd probe: invalid resource type\n"); return -ENODEV; } - hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200"); + hcd = usb_create_hcd(driver, &pdev->dev, "at91"); if (!hcd) return -ENOMEM; hcd->rsrc_start = pdev->resource[0].start; @@ -149,21 +154,23 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device * /* may be called with controller, bus, and devices active */ /** - * usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs + * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs * @dev: USB Host Controller being removed * Context: !in_interrupt() * * Reverses the effect of usb_hcd_at91_probe(), first invoking * the HCD's stop() method. It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. + * context, "rmmod" or something similar. * */ -static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev) +static int usb_hcd_at91_remove(struct usb_hcd *hcd, + struct platform_device *pdev) { usb_remove_hcd(hcd); at91_stop_hc(pdev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + disable_irq_wake(hcd->irq); clk_put(fclk); clk_put(iclk); @@ -178,19 +185,21 @@ static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pde static int __devinit ohci_at91_start (struct usb_hcd *hcd) { -// struct at91_ohci_data *board = hcd->self.controller->platform_data; + struct at91_usbh_data *board = hcd->self.controller->platform_data; struct ohci_hcd *ohci = hcd_to_ohci (hcd); + struct usb_device *root = hcd->self.root_hub; int ret; if ((ret = ohci_init(ohci)) < 0) return ret; + root->maxchild = board->ports; + if ((ret = ohci_run(ohci)) < 0) { err("can't start %s", hcd->self.bus_name); ohci_stop(hcd); return ret; } -// hcd->self.root_hub->maxchild = board->ports; return 0; } @@ -198,7 +207,7 @@ ohci_at91_start (struct usb_hcd *hcd) static const struct hc_driver ohci_at91_hc_driver = { .description = hcd_name, - .product_desc = "AT91RM9200 OHCI", + .product_desc = "AT91 OHCI", .hcd_priv_size = sizeof(struct ohci_hcd), /* @@ -240,33 +249,54 @@ static const struct hc_driver ohci_at91_hc_driver = { /*-------------------------------------------------------------------------*/ -static int ohci_hcd_at91_drv_probe(struct platform_device *dev) +static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { - return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev); + device_init_wakeup(&pdev->dev, 1); + return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); } -static int ohci_hcd_at91_drv_remove(struct platform_device *dev) +static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) { - return usb_hcd_at91_remove(platform_get_drvdata(dev), dev); + device_init_wakeup(&pdev->dev, 0); + return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev); } #ifdef CONFIG_PM -/* REVISIT suspend/resume look "too" simple here */ - static int -ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg) +ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) { - clk_disable(fclk); - clk_disable(iclk); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(hcd->irq); + else + disable_irq_wake(hcd->irq); + + /* + * The integrated transceivers seem unable to notice disconnect, + * reconnect, or wakeup without the 48 MHz clock active. so for + * correctness, always discard connection state (using reset). + * + * REVISIT: some boards will be able to turn VBUS off... + */ + if (at91_suspend_entering_slow_clock()) { + ohci_usb_reset (ohci); + clk_disable(fclk); + clk_disable(iclk); + clocked = 0; + } return 0; } -static int ohci_hcd_at91_drv_resume(struct platform_device *dev) +static int ohci_hcd_at91_drv_resume(struct platform_device *pdev) { - clk_enable(iclk); - clk_enable(fclk); + if (!clocked) { + clk_enable(iclk); + clk_enable(fclk); + } return 0; } @@ -275,7 +305,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *dev) #define ohci_hcd_at91_drv_resume NULL #endif -MODULE_ALIAS("at91rm9200-ohci"); +MODULE_ALIAS("at91_ohci"); static struct platform_driver ohci_hcd_at91_driver = { .probe = ohci_hcd_at91_drv_probe, @@ -283,7 +313,7 @@ static struct platform_driver ohci_hcd_at91_driver = { .suspend = ohci_hcd_at91_drv_suspend, .resume = ohci_hcd_at91_drv_resume, .driver = { - .name = "at91rm9200-ohci", + .name = "at91_ohci", .owner = THIS_MODULE, }, }; diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 689261e44018..f7a975d5db09 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -101,9 +101,11 @@ static void au1xxx_start_ohc(struct platform_device *dev) #endif /* Au1200 */ +#ifndef CONFIG_SOC_AU1200 /* wait for reset complete (read register twice; see au1500 errata) */ while (au_readl(USB_HOST_CONFIG), !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD)) +#endif udelay(1000); printk(KERN_DEBUG __FILE__ @@ -157,9 +159,9 @@ static int usb_ohci_au1xxx_probe(const struct hc_driver *driver, /* Au1200 AB USB does not support coherent memory */ if (!(read_c0_prid() & 0xff)) { pr_info("%s: this is chip revision AB !!\n", - dev->dev.name); + dev->name); pr_info("%s: update your board or re-configure the kernel\n", - dev->dev.name); + dev->name); return -ENODEV; } #endif diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c new file mode 100644 index 000000000000..6531c4d26527 --- /dev/null +++ b/drivers/usb/host/ohci-ep93xx.c @@ -0,0 +1,225 @@ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> + * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> + * (C) Copyright 2002 Hewlett-Packard Company + * + * Bus Glue for ep93xx. + * + * Written by Christopher Hoover <ch@hpl.hp.com> + * Based on fragments of previous driver by Russell King et al. + * + * Modified for LH7A404 from ohci-sa1111.c + * by Durgesh Pattamatta <pattamattad@sharpsec.com> + * + * Modified for pxa27x from ohci-lh7a404.c + * by Nick Bane <nick@cecomputing.co.uk> 26-8-2004 + * + * Modified for ep93xx from ohci-pxa27x.c + * by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006 + * Based on an earlier driver by Ray Lehtiniemi + * + * This file is licenced under the GPL. + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/signal.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/hardware.h> + +static struct clk *usb_host_clock; + +static void ep93xx_start_hc(struct device *dev) +{ + clk_enable(usb_host_clock); +} + +static void ep93xx_stop_hc(struct device *dev) +{ + clk_disable(usb_host_clock); +} + +static int usb_hcd_ep93xx_probe(const struct hc_driver *driver, + struct platform_device *pdev) +{ + int retval; + struct usb_hcd *hcd; + + if (pdev->resource[1].flags != IORESOURCE_IRQ) { + pr_debug("resource[1] is not IORESOURCE_IRQ"); + return -ENOMEM; + } + + hcd = usb_create_hcd(driver, &pdev->dev, "ep93xx"); + if (hcd == NULL) + return -ENOMEM; + + hcd->rsrc_start = pdev->resource[0].start; + hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + usb_put_hcd(hcd); + retval = -EBUSY; + goto err1; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + pr_debug("ioremap failed"); + retval = -ENOMEM; + goto err2; + } + + usb_host_clock = clk_get(&pdev->dev, "usb_host"); + ep93xx_start_hc(&pdev->dev); + + ohci_hcd_init(hcd_to_ohci(hcd)); + + retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT); + if (retval == 0) + return retval; + + ep93xx_stop_hc(&pdev->dev); + iounmap(hcd->regs); +err2: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err1: + usb_put_hcd(hcd); + + return retval; +} + +static void usb_hcd_ep93xx_remove(struct usb_hcd *hcd, + struct platform_device *pdev) +{ + usb_remove_hcd(hcd); + ep93xx_stop_hc(&pdev->dev); + clk_put(usb_host_clock); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); +} + +static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + if ((ret = ohci_init(ohci)) < 0) + return ret; + + if ((ret = ohci_run(ohci)) < 0) { + err("can't start %s", hcd->self.bus_name); + ohci_stop(hcd); + return ret; + } + + return 0; +} + +static struct hc_driver ohci_ep93xx_hc_driver = { + .description = hcd_name, + .product_desc = "EP93xx OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + .start = ohci_ep93xx_start, + .stop = ohci_stop, + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + .get_frame_number = ohci_get_frame, + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +extern int usb_disabled(void); + +static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev) +{ + int ret; + + ret = -ENODEV; + if (!usb_disabled()) + ret = usb_hcd_ep93xx_probe(&ohci_ep93xx_hc_driver, pdev); + + return ret; +} + +static int ohci_hcd_ep93xx_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_hcd_ep93xx_remove(hcd, pdev); + + return 0; +} + +#ifdef CONFIG_PM +static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ochi_hcd *ohci = hcd_to_ohci(hcd); + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ep93xx_stop_hc(&pdev->dev); + hcd->state = HC_STATE_SUSPENDED; + pdev->dev.power.power_state = PMSG_SUSPEND; + + return 0; +} + +static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int status; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ep93xx_start_hc(&pdev->dev); + pdev->dev.power.power_state = PMSG_ON; + usb_hcd_resume_root_hub(hcd); + + return 0; +} +#endif + + +static struct platform_driver ohci_hcd_ep93xx_driver = { + .probe = ohci_hcd_ep93xx_drv_probe, + .remove = ohci_hcd_ep93xx_drv_remove, +#ifdef CONFIG_PM + .suspend = ohci_hcd_ep93xx_drv_suspend, + .resume = ohci_hcd_ep93xx_drv_resume, +#endif + .driver = { + .name = "ep93xx-ohci", + }, +}; + +static int __init ohci_hcd_ep93xx_init(void) +{ + return platform_driver_register(&ohci_hcd_ep93xx_driver); +} + +static void __exit ohci_hcd_ep93xx_cleanup(void) +{ + platform_driver_unregister(&ohci_hcd_ep93xx_driver); +} + +module_init(ohci_hcd_ep93xx_init); +module_exit(ohci_hcd_ep93xx_cleanup); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 8fb842ed5f6e..94d8cf4b36c1 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -901,6 +901,10 @@ MODULE_LICENSE ("GPL"); #include "ohci-pxa27x.c" #endif +#ifdef CONFIG_ARCH_EP93XX +#include "ohci-ep93xx.c" +#endif + #ifdef CONFIG_SOC_AU1X00 #include "ohci-au1xxx.c" #endif @@ -909,7 +913,7 @@ MODULE_LICENSE ("GPL"); #include "ohci-ppc-soc.c" #endif -#ifdef CONFIG_ARCH_AT91RM9200 +#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261) #include "ohci-at91.c" #endif @@ -919,9 +923,11 @@ MODULE_LICENSE ("GPL"); || defined(CONFIG_ARCH_OMAP) \ || defined (CONFIG_ARCH_LH7A404) \ || defined (CONFIG_PXA27x) \ + || defined (CONFIG_ARCH_EP93XX) \ || defined (CONFIG_SOC_AU1X00) \ || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \ || defined (CONFIG_ARCH_AT91RM9200) \ + || defined (CONFIG_ARCH_AT91SAM9261) \ ) #error "missing bus glue for ohci-hcd" #endif diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 0bb972b58336..5b0a23fd798b 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -581,14 +581,14 @@ static int ohci_hub_control ( break; case GetHubStatus: temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE); - *(__le32 *) buf = cpu_to_le32 (temp); + put_unaligned(cpu_to_le32 (temp), (__le32 *) buf); break; case GetPortStatus: if (!wIndex || wIndex > ports) goto error; wIndex--; temp = roothub_portstatus (ohci, wIndex); - *(__le32 *) buf = cpu_to_le32 (temp); + put_unaligned(cpu_to_le32 (temp), (__le32 *) buf); #ifndef OHCI_VERBOSE_DEBUG if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index dff60568b4a1..20861650905e 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -167,8 +167,6 @@ static int __devinit mmio_resource_enabled(struct pci_dev *pdev, int idx) static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) { void __iomem *base; - int wait_time; - u32 control; if (!mmio_resource_enabled(pdev, 0)) return; @@ -179,9 +177,10 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */ #ifndef __hppa__ - control = readl(base + OHCI_CONTROL); +{ + u32 control = readl(base + OHCI_CONTROL); if (control & OHCI_CTRL_IR) { - wait_time = 500; /* arbitrary; 5 seconds */ + int wait_time = 500; /* arbitrary; 5 seconds */ writel(OHCI_INTR_OC, base + OHCI_INTRENABLE); writel(OHCI_OCR, base + OHCI_CMDSTATUS); while (wait_time > 0 && @@ -198,6 +197,7 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) /* reset controller, preserving RWC */ writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL); } +} #endif /* diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index c9d72ac0a1d7..431e8f31f1a9 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -372,7 +372,7 @@ static void uhci_fixup_toggles(struct uhci_qh *qh, int skip_first) * need to change any toggles in this URB */ td = list_entry(urbp->td_list.next, struct uhci_td, list); if (toggle > 1 || uhci_toggle(td_token(td)) == toggle) { - td = list_entry(urbp->td_list.next, struct uhci_td, + td = list_entry(urbp->td_list.prev, struct uhci_td, list); toggle = uhci_toggle(td_token(td)) ^ 1; @@ -943,7 +943,9 @@ static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb) /* We received a short packet */ if (urb->transfer_flags & URB_SHORT_NOT_OK) ret = -EREMOTEIO; - else if (ctrlstat & TD_CTRL_SPD) + + /* Fixup needed only if this isn't the URB's last TD */ + else if (&td->list != urbp->td_list.prev) ret = 1; } @@ -1346,7 +1348,7 @@ static void uhci_scan_qh(struct uhci_hcd *uhci, struct uhci_qh *qh, } uhci_giveback_urb(uhci, qh, urb, regs); - if (status < 0) + if (status < 0 && qh->type != USB_ENDPOINT_XFER_ISOC) break; } diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c index 9e3f13903371..044faa07e297 100644 --- a/drivers/usb/input/appletouch.c +++ b/drivers/usb/input/appletouch.c @@ -597,9 +597,9 @@ static void atp_disconnect(struct usb_interface *iface) if (dev) { usb_kill_urb(dev->urb); input_unregister_device(dev->input); - usb_free_urb(dev->urb); usb_buffer_free(dev->udev, dev->datalen, dev->data, dev->urb->transfer_dma); + usb_free_urb(dev->urb); kfree(dev); } printk(KERN_INFO "input: appletouch disconnected\n"); diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 05d2d6012eb2..3719fcb04b8f 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -111,14 +111,28 @@ #define NAME_BUFSIZE 80 /* size of product name, path buffers */ #define DATA_BUFSIZE 63 /* size of URB data buffers */ +/* + * Duplicate event filtering time. + * Sequential, identical KIND_FILTERED inputs with less than + * FILTER_TIME milliseconds between them are considered as repeat + * events. The hardware generates 5 events for the first keypress + * and we have to take this into account for an accurate repeat + * behaviour. + */ +#define FILTER_TIME 60 /* msec */ + static unsigned long channel_mask; -module_param(channel_mask, ulong, 0444); +module_param(channel_mask, ulong, 0644); MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore"); static int debug; -module_param(debug, int, 0444); +module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); +static int repeat_filter = FILTER_TIME; +module_param(repeat_filter, int, 0644); +MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec"); + #define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0) #undef err #define err(format, arg...) printk(KERN_ERR format , ## arg) @@ -143,19 +157,6 @@ MODULE_DEVICE_TABLE(usb, ati_remote_table); static char init1[] = { 0x01, 0x00, 0x20, 0x14 }; static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; -/* Acceleration curve for directional control pad */ -static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; - -/* Duplicate event filtering time. - * Sequential, identical KIND_FILTERED inputs with less than - * FILTER_TIME jiffies between them are considered as repeat - * events. The hardware generates 5 events for the first keypress - * and we have to take this into account for an accurate repeat - * behaviour. - * (HZ / 20) == 50 ms and works well for me. - */ -#define FILTER_TIME (HZ / 20) - struct ati_remote { struct input_dev *idev; struct usb_device *udev; @@ -413,6 +414,43 @@ static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2) } /* + * ati_remote_compute_accel + * + * Implements acceleration curve for directional control pad + * If elapsed time since last event is > 1/4 second, user "stopped", + * so reset acceleration. Otherwise, user is probably holding the control + * pad down, so we increase acceleration, ramping up over two seconds to + * a maximum speed. + */ +static int ati_remote_compute_accel(struct ati_remote *ati_remote) +{ + static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; + unsigned long now = jiffies; + int acc; + + if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) { + acc = 1; + ati_remote->acc_jiffies = now; + } + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125))) + acc = accel[0]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250))) + acc = accel[1]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500))) + acc = accel[2]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000))) + acc = accel[3]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500))) + acc = accel[4]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000))) + acc = accel[5]; + else + acc = accel[6]; + + return acc; +} + +/* * ati_remote_report_input */ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) @@ -465,9 +503,9 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) if (ati_remote_tbl[index].kind == KIND_FILTERED) { /* Filter duplicate events which happen "too close" together. */ - if ((ati_remote->old_data[0] == data[1]) && - (ati_remote->old_data[1] == data[2]) && - time_before(jiffies, ati_remote->old_jiffies + FILTER_TIME)) { + if (ati_remote->old_data[0] == data[1] && + ati_remote->old_data[1] == data[2] && + time_before(jiffies, ati_remote->old_jiffies + msecs_to_jiffies(repeat_filter))) { ati_remote->repeat_count++; } else { ati_remote->repeat_count = 0; @@ -477,75 +515,61 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) ati_remote->old_data[1] = data[2]; ati_remote->old_jiffies = jiffies; - if ((ati_remote->repeat_count > 0) - && (ati_remote->repeat_count < 5)) + if (ati_remote->repeat_count > 0 && + ati_remote->repeat_count < 5) return; input_regs(dev, regs); input_event(dev, ati_remote_tbl[index].type, ati_remote_tbl[index].code, 1); + input_sync(dev); input_event(dev, ati_remote_tbl[index].type, ati_remote_tbl[index].code, 0); input_sync(dev); - return; - } + } else { - /* - * Other event kinds are from the directional control pad, and have an - * acceleration factor applied to them. Without this acceleration, the - * control pad is mostly unusable. - * - * If elapsed time since last event is > 1/4 second, user "stopped", - * so reset acceleration. Otherwise, user is probably holding the control - * pad down, so we increase acceleration, ramping up over two seconds to - * a maximum speed. The acceleration curve is #defined above. - */ - if (time_after(jiffies, ati_remote->old_jiffies + (HZ >> 2))) { - acc = 1; - ati_remote->acc_jiffies = jiffies; - } - else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 3))) acc = accel[0]; - else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 2))) acc = accel[1]; - else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 1))) acc = accel[2]; - else if (time_before(jiffies, ati_remote->acc_jiffies + HZ)) acc = accel[3]; - else if (time_before(jiffies, ati_remote->acc_jiffies + HZ+(HZ>>1))) acc = accel[4]; - else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ << 1))) acc = accel[5]; - else acc = accel[6]; - - input_regs(dev, regs); - switch (ati_remote_tbl[index].kind) { - case KIND_ACCEL: - input_event(dev, ati_remote_tbl[index].type, - ati_remote_tbl[index].code, - ati_remote_tbl[index].value * acc); - break; - case KIND_LU: - input_report_rel(dev, REL_X, -acc); - input_report_rel(dev, REL_Y, -acc); - break; - case KIND_RU: - input_report_rel(dev, REL_X, acc); - input_report_rel(dev, REL_Y, -acc); - break; - case KIND_LD: - input_report_rel(dev, REL_X, -acc); - input_report_rel(dev, REL_Y, acc); - break; - case KIND_RD: - input_report_rel(dev, REL_X, acc); - input_report_rel(dev, REL_Y, acc); - break; - default: - dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", - ati_remote_tbl[index].kind); - } - input_sync(dev); + /* + * Other event kinds are from the directional control pad, and have an + * acceleration factor applied to them. Without this acceleration, the + * control pad is mostly unusable. + */ + acc = ati_remote_compute_accel(ati_remote); + + input_regs(dev, regs); + switch (ati_remote_tbl[index].kind) { + case KIND_ACCEL: + input_event(dev, ati_remote_tbl[index].type, + ati_remote_tbl[index].code, + ati_remote_tbl[index].value * acc); + break; + case KIND_LU: + input_report_rel(dev, REL_X, -acc); + input_report_rel(dev, REL_Y, -acc); + break; + case KIND_RU: + input_report_rel(dev, REL_X, acc); + input_report_rel(dev, REL_Y, -acc); + break; + case KIND_LD: + input_report_rel(dev, REL_X, -acc); + input_report_rel(dev, REL_Y, acc); + break; + case KIND_RD: + input_report_rel(dev, REL_X, acc); + input_report_rel(dev, REL_Y, acc); + break; + default: + dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", + ati_remote_tbl[index].kind); + } + input_sync(dev); - ati_remote->old_jiffies = jiffies; - ati_remote->old_data[0] = data[1]; - ati_remote->old_data[1] = data[2]; + ati_remote->old_jiffies = jiffies; + ati_remote->old_data[0] = data[1]; + ati_remote->old_data[1] = data[2]; + } } /* diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index e3cd0321c59c..bfa267722f1b 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1410,17 +1410,54 @@ void hid_init_reports(struct hid_device *hid) warn("timeout initializing reports"); } +#define USB_VENDOR_ID_GTCO 0x078c +#define USB_DEVICE_ID_GTCO_90 0x0090 +#define USB_DEVICE_ID_GTCO_100 0x0100 +#define USB_DEVICE_ID_GTCO_101 0x0101 +#define USB_DEVICE_ID_GTCO_103 0x0103 +#define USB_DEVICE_ID_GTCO_104 0x0104 +#define USB_DEVICE_ID_GTCO_105 0x0105 +#define USB_DEVICE_ID_GTCO_106 0x0106 +#define USB_DEVICE_ID_GTCO_107 0x0107 +#define USB_DEVICE_ID_GTCO_108 0x0108 +#define USB_DEVICE_ID_GTCO_200 0x0200 +#define USB_DEVICE_ID_GTCO_201 0x0201 +#define USB_DEVICE_ID_GTCO_202 0x0202 +#define USB_DEVICE_ID_GTCO_203 0x0203 +#define USB_DEVICE_ID_GTCO_204 0x0204 +#define USB_DEVICE_ID_GTCO_205 0x0205 +#define USB_DEVICE_ID_GTCO_206 0x0206 +#define USB_DEVICE_ID_GTCO_207 0x0207 +#define USB_DEVICE_ID_GTCO_300 0x0300 +#define USB_DEVICE_ID_GTCO_301 0x0301 +#define USB_DEVICE_ID_GTCO_302 0x0302 +#define USB_DEVICE_ID_GTCO_303 0x0303 +#define USB_DEVICE_ID_GTCO_304 0x0304 +#define USB_DEVICE_ID_GTCO_305 0x0305 +#define USB_DEVICE_ID_GTCO_306 0x0306 +#define USB_DEVICE_ID_GTCO_307 0x0307 +#define USB_DEVICE_ID_GTCO_308 0x0308 +#define USB_DEVICE_ID_GTCO_309 0x0309 +#define USB_DEVICE_ID_GTCO_400 0x0400 +#define USB_DEVICE_ID_GTCO_401 0x0401 +#define USB_DEVICE_ID_GTCO_402 0x0402 +#define USB_DEVICE_ID_GTCO_403 0x0403 +#define USB_DEVICE_ID_GTCO_404 0x0404 +#define USB_DEVICE_ID_GTCO_405 0x0405 +#define USB_DEVICE_ID_GTCO_500 0x0500 +#define USB_DEVICE_ID_GTCO_501 0x0501 +#define USB_DEVICE_ID_GTCO_502 0x0502 +#define USB_DEVICE_ID_GTCO_503 0x0503 +#define USB_DEVICE_ID_GTCO_504 0x0504 +#define USB_DEVICE_ID_GTCO_1000 0x1000 +#define USB_DEVICE_ID_GTCO_1001 0x1001 +#define USB_DEVICE_ID_GTCO_1002 0x1002 +#define USB_DEVICE_ID_GTCO_1003 0x1003 +#define USB_DEVICE_ID_GTCO_1004 0x1004 +#define USB_DEVICE_ID_GTCO_1005 0x1005 +#define USB_DEVICE_ID_GTCO_1006 0x1006 + #define USB_VENDOR_ID_WACOM 0x056a -#define USB_DEVICE_ID_WACOM_PENPARTNER 0x0000 -#define USB_DEVICE_ID_WACOM_GRAPHIRE 0x0010 -#define USB_DEVICE_ID_WACOM_INTUOS 0x0020 -#define USB_DEVICE_ID_WACOM_PL 0x0030 -#define USB_DEVICE_ID_WACOM_INTUOS2 0x0040 -#define USB_DEVICE_ID_WACOM_VOLITO 0x0060 -#define USB_DEVICE_ID_WACOM_PTU 0x0003 -#define USB_DEVICE_ID_WACOM_INTUOS3 0x00B0 -#define USB_DEVICE_ID_WACOM_CINTIQ 0x003F -#define USB_DEVICE_ID_WACOM_DTF 0x00C0 #define USB_VENDOR_ID_ACECAD 0x0460 #define USB_DEVICE_ID_ACECAD_FLAIR 0x0004 @@ -1506,6 +1543,9 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104 #define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866 +#define USB_VENDOR_ID_WISEGROUP_LTD 0x6677 +#define USB_DEVICE_ID_SMARTJOY_DUAL_PLUS 0x8802 + #define USB_VENDOR_ID_CODEMERCS 0x07c0 #define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500 #define USB_DEVICE_ID_CODEMERCS_IOW24 0x1501 @@ -1584,6 +1624,51 @@ static const struct hid_blacklist { { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_8_IF_KIT, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_90, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_100, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_101, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_103, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_104, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_105, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_106, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_107, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_108, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_200, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_201, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_202, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_203, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_204, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_205, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_206, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_207, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_300, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_301, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_302, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_303, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_304, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_305, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_306, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_307, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_308, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_309, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_400, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_401, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_402, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_403, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_405, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_500, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_501, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_502, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_503, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_504, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1000, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1001, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1002, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1003, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE }, @@ -1613,49 +1698,6 @@ static const struct hid_blacklist { { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 2, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 3, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 4, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 1, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 2, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 3, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 4, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 1, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 2, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 3, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 4, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 5, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 7, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 8, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 9, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 1, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 2, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 3, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 4, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 5, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 1, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 2, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 3, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 4, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 5, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 6, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 3, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 4, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 5, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF + 3, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K, HID_QUIRK_IGNORE }, @@ -1669,6 +1711,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL }, { USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 }, @@ -1773,6 +1816,10 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) char *rdesc; int n, len, insize = 0; + /* Ignore all Wacom devices */ + if (dev->descriptor.idVendor == USB_VENDOR_ID_WACOM) + return NULL; + for (n = 0; hid_blacklist[n].idVendor; n++) if ((hid_blacklist[n].idVendor == le16_to_cpu(dev->descriptor.idVendor)) && (hid_blacklist[n].idProduct == le16_to_cpu(dev->descriptor.idProduct))) diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c index 3b175aa482cd..a338bf4c2d78 100644 --- a/drivers/usb/input/usbtouchscreen.c +++ b/drivers/usb/input/usbtouchscreen.c @@ -286,7 +286,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) { *x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F); - *x = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); + *y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); *press = ((pkt[2] & 0x1F) << 7) | (pkt[5] & 0x7F); *touch = ~pkt[7] & 0x20; diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c index 575a4e672e96..7b45fd3de911 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/usb/input/yealink.c @@ -810,12 +810,9 @@ static int usb_cleanup(struct yealink_dev *yld, int err) if (yld == NULL) return err; - if (yld->urb_irq) { - usb_kill_urb(yld->urb_irq); - usb_free_urb(yld->urb_irq); - } - if (yld->urb_ctl) - usb_free_urb(yld->urb_ctl); + usb_kill_urb(yld->urb_irq); /* parameter validation in core/urb */ + usb_kill_urb(yld->urb_ctl); /* parameter validation in core/urb */ + if (yld->idev) { if (err) input_free_device(yld->idev); @@ -831,6 +828,9 @@ static int usb_cleanup(struct yealink_dev *yld, int err) if (yld->irq_data) usb_buffer_free(yld->udev, USB_PKT_LEN, yld->irq_data, yld->irq_dma); + + usb_free_urb(yld->urb_irq); /* parameter validation in core/urb */ + usb_free_urb(yld->urb_ctl); /* parameter validation in core/urb */ kfree(yld); return err; } diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index daa486dde8cf..88928a4be805 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -88,19 +88,19 @@ config USB_LED To compile this driver as a module, choose M here: the module will be called usbled. -config USB_CY7C63 +config USB_CYPRESS_CY7C63 tristate "Cypress CY7C63xxx USB driver support" depends on USB help Say Y here if you want to connect a Cypress CY7C63xxx - micro controller to your computer's USB port. This driver - supports the pre-programmed devices (incl. firmware) by - AK Modul-Bus Computer GmbH. + micro controller to your computer's USB port. Currently this + driver supports the pre-programmed devices (incl. firmware) + by AK Modul-Bus Computer GmbH. Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html To compile this driver as a module, choose M here: the - module will be called cy7c63. + module will be called cypress_cy7c63. config USB_CYTHERM tristate "Cypress USB thermometer driver support" diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index f25a97227297..2927260c5812 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -4,7 +4,7 @@ # obj-$(CONFIG_USB_AUERSWALD) += auerswald.o -obj-$(CONFIG_USB_CY7C63) += cy7c63.o +obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o obj-$(CONFIG_USB_CYTHERM) += cytherm.o obj-$(CONFIG_USB_EMI26) += emi26.o obj-$(CONFIG_USB_EMI62) += emi62.o diff --git a/drivers/usb/misc/cy7c63.c b/drivers/usb/misc/cy7c63.c deleted file mode 100644 index 8a1c10b89b76..000000000000 --- a/drivers/usb/misc/cy7c63.c +++ /dev/null @@ -1,244 +0,0 @@ -/* -* cy7c63.c -* -* Copyright (c) 2006 Oliver Bock (bock@fh-wolfenbuettel.de) -* -* This driver is based on the Cypress Thermometer USB Driver by -* Marcus Maul and the 2.0 version of Greg Kroah-Hartman's -* USB Skeleton driver. -* -* Is is a generic driver for the Cypress CY7C63000 family. -* For the time being it enables you to toggle the single I/O ports -* of the device. -* -* Supported vendors: AK Modul-Bus Computer GmbH -* Supported devices: CY7C63001A-PC (to be continued...) -* Supported functions: Read/Write Ports (to be continued...) -* -* Chipsets families: CY7C63000, CY7C63001, CY7C63100, CY7C63101 -* -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation, version 2. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/usb.h> - -#define DRIVER_AUTHOR "Oliver Bock (bock@fh-wolfenbuettel.de)" -#define DRIVER_DESC "Cypress CY7C63xxx USB driver" - -#define CY7C63_VENDOR_ID 0xa2c -#define CY7C63_PRODUCT_ID 0x8 - -#define CY7C63_READ_PORT 0x4 -#define CY7C63_WRITE_PORT 0x5 -#define CY7C63_READ_RAM 0x2 -#define CY7C63_WRITE_RAM 0x3 -#define CY7C63_READ_ROM 0x1 - -#define CY7C63_READ_PORT_ID0 0 -#define CY7C63_WRITE_PORT_ID0 0 -#define CY7C63_READ_PORT_ID1 0x2 -#define CY7C63_WRITE_PORT_ID1 1 - -#define CY7C63_MAX_REQSIZE 8 - - -/* table of devices that work with this driver */ -static struct usb_device_id cy7c63_table [] = { - { USB_DEVICE(CY7C63_VENDOR_ID, CY7C63_PRODUCT_ID) }, - { } -}; -MODULE_DEVICE_TABLE(usb, cy7c63_table); - -/* structure to hold all of our device specific stuff */ -struct cy7c63 { - struct usb_device * udev; - char port0; - char port1; -}; - -/* used to send usb control messages to device */ -int vendor_command(struct cy7c63 *dev, unsigned char request, - unsigned char address, unsigned char data) { - - int retval = 0; - unsigned int pipe; - unsigned char *iobuf; - - /* allocate some memory for the i/o buffer*/ - iobuf = kzalloc(CY7C63_MAX_REQSIZE, GFP_KERNEL); - if (!iobuf) { - dev_err(&dev->udev->dev, "Out of memory!\n"); - retval = -ENOMEM; - goto error; - } - - dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data); - - /* prepare usb control message and send it upstream */ - pipe = usb_rcvctrlpipe(dev->udev, 0); - retval = usb_control_msg(dev->udev, pipe, request, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, - address, data, iobuf, CY7C63_MAX_REQSIZE, - USB_CTRL_GET_TIMEOUT); - - /* store returned data (more READs to be added!) */ - switch (request) { - case CY7C63_READ_PORT: - if (address == CY7C63_READ_PORT_ID0) { - dev->port0 = iobuf[1]; - dev_dbg(&dev->udev->dev, - "READ_PORT0 returned: %d\n",dev->port0); - } - else if (address == CY7C63_READ_PORT_ID1) { - dev->port1 = iobuf[1]; - dev_dbg(&dev->udev->dev, - "READ_PORT1 returned: %d\n",dev->port1); - } - break; - } - - kfree(iobuf); -error: - return retval; -} - -#define get_set_port(num,read_id,write_id) \ -static ssize_t set_port##num(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) { \ - \ - int value; \ - int result = 0; \ - \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct cy7c63 *cyp = usb_get_intfdata(intf); \ - \ - dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", num); \ - \ - /* validate input data */ \ - if (sscanf(buf, "%d", &value) < 1) { \ - result = -EINVAL; \ - goto error; \ - } \ - if (value>255 || value<0) { \ - result = -EINVAL; \ - goto error; \ - } \ - \ - result = vendor_command(cyp, CY7C63_WRITE_PORT, write_id, \ - (unsigned char)value); \ - \ - dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n",result); \ -error: \ - return result < 0 ? result : count; \ -} \ - \ -static ssize_t get_port##num(struct device *dev, \ - struct device_attribute *attr, char *buf) { \ - \ - int result = 0; \ - \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct cy7c63 *cyp = usb_get_intfdata(intf); \ - \ - dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", num); \ - \ - result = vendor_command(cyp, CY7C63_READ_PORT, read_id, 0); \ - \ - dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result); \ - \ - return sprintf(buf, "%d", cyp->port##num); \ -} \ -static DEVICE_ATTR(port##num, S_IWUGO | S_IRUGO, get_port##num, set_port##num); - -get_set_port(0, CY7C63_READ_PORT_ID0, CY7C63_WRITE_PORT_ID0); -get_set_port(1, CY7C63_READ_PORT_ID1, CY7C63_WRITE_PORT_ID1); - -static int cy7c63_probe(struct usb_interface *interface, - const struct usb_device_id *id) { - - struct cy7c63 *dev = NULL; - int retval = -ENOMEM; - - /* allocate memory for our device state and initialize it */ - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (dev == NULL) { - dev_err(&dev->udev->dev, "Out of memory!\n"); - goto error; - } - - dev->udev = usb_get_dev(interface_to_usbdev(interface)); - - /* save our data pointer in this interface device */ - usb_set_intfdata(interface, dev); - - /* create device attribute files */ - device_create_file(&interface->dev, &dev_attr_port0); - device_create_file(&interface->dev, &dev_attr_port1); - - /* let the user know what node this device is now attached to */ - dev_info(&interface->dev, - "Cypress CY7C63xxx device now attached\n"); - - retval = 0; -error: - return retval; -} - -static void cy7c63_disconnect(struct usb_interface *interface) { - - struct cy7c63 *dev; - - dev = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - - /* remove device attribute files */ - device_remove_file(&interface->dev, &dev_attr_port0); - device_remove_file(&interface->dev, &dev_attr_port1); - - usb_put_dev(dev->udev); - - dev_info(&interface->dev, - "Cypress CY7C63xxx device now disconnected\n"); - - kfree(dev); -} - -static struct usb_driver cy7c63_driver = { - .name = "cy7c63", - .probe = cy7c63_probe, - .disconnect = cy7c63_disconnect, - .id_table = cy7c63_table, -}; - -static int __init cy7c63_init(void) { - - int result; - - /* register this driver with the USB subsystem */ - result = usb_register(&cy7c63_driver); - if (result) { - err("Function usb_register failed! Error number: %d\n", result); - } - - return result; -} - -static void __exit cy7c63_exit(void) { - - /* deregister this driver with the USB subsystem */ - usb_deregister(&cy7c63_driver); -} - -module_init(cy7c63_init); -module_exit(cy7c63_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); - -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c new file mode 100644 index 000000000000..9c46746d5d00 --- /dev/null +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -0,0 +1,284 @@ +/* +* cypress_cy7c63.c +* +* Copyright (c) 2006 Oliver Bock (o.bock@fh-wolfenbuettel.de) +* +* This driver is based on the Cypress USB Driver by Marcus Maul +* (cyport) and the 2.0 version of Greg Kroah-Hartman's +* USB Skeleton driver. +* +* This is a generic driver for the Cypress CY7C63xxx family. +* For the time being it enables you to read from and write to +* the single I/O ports of the device. +* +* Supported vendors: AK Modul-Bus Computer GmbH +* (Firmware "Port-Chip") +* +* Supported devices: CY7C63001A-PC +* CY7C63001C-PXC +* CY7C63001C-SXC +* +* Supported functions: Read/Write Ports +* +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation, version 2. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/usb.h> + +#define DRIVER_AUTHOR "Oliver Bock (o.bock@fh-wolfenbuettel.de)" +#define DRIVER_DESC "Cypress CY7C63xxx USB driver" + +#define CYPRESS_VENDOR_ID 0xa2c +#define CYPRESS_PRODUCT_ID 0x8 + +#define CYPRESS_READ_PORT 0x4 +#define CYPRESS_WRITE_PORT 0x5 + +#define CYPRESS_READ_RAM 0x2 +#define CYPRESS_WRITE_RAM 0x3 +#define CYPRESS_READ_ROM 0x1 + +#define CYPRESS_READ_PORT_ID0 0 +#define CYPRESS_WRITE_PORT_ID0 0 +#define CYPRESS_READ_PORT_ID1 0x2 +#define CYPRESS_WRITE_PORT_ID1 1 + +#define CYPRESS_MAX_REQSIZE 8 + + +/* table of devices that work with this driver */ +static struct usb_device_id cypress_table [] = { + { USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) }, + { } +}; +MODULE_DEVICE_TABLE(usb, cypress_table); + +/* structure to hold all of our device specific stuff */ +struct cypress { + struct usb_device * udev; + unsigned char port[2]; +}; + +/* used to send usb control messages to device */ +static int vendor_command(struct cypress *dev, unsigned char request, + unsigned char address, unsigned char data) +{ + int retval = 0; + unsigned int pipe; + unsigned char *iobuf; + + /* allocate some memory for the i/o buffer*/ + iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL); + if (!iobuf) { + dev_err(&dev->udev->dev, "Out of memory!\n"); + retval = -ENOMEM; + goto error; + } + + dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data); + + /* prepare usb control message and send it upstream */ + pipe = usb_rcvctrlpipe(dev->udev, 0); + retval = usb_control_msg(dev->udev, pipe, request, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, + address, data, iobuf, CYPRESS_MAX_REQSIZE, + USB_CTRL_GET_TIMEOUT); + + /* store returned data (more READs to be added) */ + switch (request) { + case CYPRESS_READ_PORT: + if (address == CYPRESS_READ_PORT_ID0) { + dev->port[0] = iobuf[1]; + dev_dbg(&dev->udev->dev, + "READ_PORT0 returned: %d\n", + dev->port[0]); + } + else if (address == CYPRESS_READ_PORT_ID1) { + dev->port[1] = iobuf[1]; + dev_dbg(&dev->udev->dev, + "READ_PORT1 returned: %d\n", + dev->port[1]); + } + break; + } + + kfree(iobuf); +error: + return retval; +} + +/* write port value */ +static ssize_t write_port(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count, + int port_num, int write_id) +{ + int value = -1; + int result = 0; + + struct usb_interface *intf = to_usb_interface(dev); + struct cypress *cyp = usb_get_intfdata(intf); + + dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num); + + /* validate input data */ + if (sscanf(buf, "%d", &value) < 1) { + result = -EINVAL; + goto error; + } + if (value < 0 || value > 255) { + result = -EINVAL; + goto error; + } + + result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id, + (unsigned char)value); + + dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result); +error: + return result < 0 ? result : count; +} + +/* attribute callback handler (write) */ +static ssize_t set_port0_handler(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0); +} + +/* attribute callback handler (write) */ +static ssize_t set_port1_handler(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1); +} + +/* read port value */ +static ssize_t read_port(struct device *dev, struct device_attribute *attr, + char *buf, int port_num, int read_id) +{ + int result = 0; + + struct usb_interface *intf = to_usb_interface(dev); + struct cypress *cyp = usb_get_intfdata(intf); + + dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num); + + result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0); + + dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result); + + return sprintf(buf, "%d", cyp->port[port_num]); +} + +/* attribute callback handler (read) */ +static ssize_t get_port0_handler(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0); +} + +/* attribute callback handler (read) */ +static ssize_t get_port1_handler(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1); +} + +static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO, + get_port0_handler, set_port0_handler); + +static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO, + get_port1_handler, set_port1_handler); + + +static int cypress_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct cypress *dev = NULL; + int retval = -ENOMEM; + + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + dev_err(&interface->dev, "Out of memory!\n"); + goto error; + } + + dev->udev = usb_get_dev(interface_to_usbdev(interface)); + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, dev); + + /* create device attribute files */ + device_create_file(&interface->dev, &dev_attr_port0); + device_create_file(&interface->dev, &dev_attr_port1); + + /* let the user know that the device is now attached */ + dev_info(&interface->dev, + "Cypress CY7C63xxx device now attached\n"); + + retval = 0; +error: + return retval; +} + +static void cypress_disconnect(struct usb_interface *interface) +{ + struct cypress *dev; + + dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + /* remove device attribute files */ + device_remove_file(&interface->dev, &dev_attr_port0); + device_remove_file(&interface->dev, &dev_attr_port1); + + usb_put_dev(dev->udev); + + dev_info(&interface->dev, + "Cypress CY7C63xxx device now disconnected\n"); + + kfree(dev); +} + +static struct usb_driver cypress_driver = { + .name = "cypress_cy7c63", + .probe = cypress_probe, + .disconnect = cypress_disconnect, + .id_table = cypress_table, +}; + +static int __init cypress_init(void) +{ + int result; + + /* register this driver with the USB subsystem */ + result = usb_register(&cypress_driver); + if (result) { + err("Function usb_register failed! Error number: %d\n", result); + } + + return result; +} + +static void __exit cypress_exit(void) +{ + /* deregister this driver with the USB subsystem */ + usb_deregister(&cypress_driver); +} + +module_init(cypress_init); +module_exit(cypress_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); + +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 738bd7c7451f..e16582f3733c 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3435,6 +3435,8 @@ static void sisusb_disconnect(struct usb_interface *intf) static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0900) }, + { USB_DEVICE(0x0711, 0x0901) }, + { USB_DEVICE(0x0711, 0x0902) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, { } diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index c82c402285a0..e095772dd8e9 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -200,10 +200,8 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz /* create a urb, and a buffer for it, and copy the data to the urb */ urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - retval = -ENOMEM; - goto error; - } + if (!urb) + return -ENOMEM; buf = usb_buffer_alloc(dev->udev, count, GFP_KERNEL, &urb->transfer_dma); if (!buf) { diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 786e1dbe88ec..983e104dd452 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1242,11 +1242,12 @@ done: static int ctrl_out (struct usbtest_dev *dev, unsigned count, unsigned length, unsigned vary) { - unsigned i, j, len, retval; + unsigned i, j, len; + int retval; u8 *buf; char *what = "?"; struct usb_device *udev; - + if (length < 1 || length > 0xffff || vary >= length) return -EINVAL; diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index e02c1a30c4cd..f961a770cee2 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -64,7 +64,6 @@ struct mon_reader_text { }; static void mon_text_ctor(void *, kmem_cache_t *, unsigned long); -static void mon_text_dtor(void *, kmem_cache_t *, unsigned long); /* * mon_text_submit @@ -268,7 +267,7 @@ static int mon_text_open(struct inode *inode, struct file *file) (long)rp); rp->e_slab = kmem_cache_create(rp->slab_name, sizeof(struct mon_event_text), sizeof(long), 0, - mon_text_ctor, mon_text_dtor); + mon_text_ctor, NULL); if (rp->e_slab == NULL) { rc = -ENOMEM; goto err_slab; @@ -459,7 +458,3 @@ static void mon_text_ctor(void *mem, kmem_cache_t *slab, unsigned long sflags) memset(mem, 0xe5, sizeof(struct mon_event_text)); } -static void mon_text_dtor(void *mem, kmem_cache_t *slab, unsigned long sflags) -{ - ; -} diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h index a54752ce1493..006438069b66 100644 --- a/drivers/usb/net/pegasus.h +++ b/drivers/usb/net/pegasus.h @@ -131,6 +131,7 @@ struct usb_eth_dev { #define VENDOR_COREGA 0x07aa #define VENDOR_DLINK 0x2001 #define VENDOR_ELCON 0x0db7 +#define VENDOR_ELECOM 0x056e #define VENDOR_ELSA 0x05cc #define VENDOR_GIGABYTE 0x1044 #define VENDOR_HAWKING 0x0e66 @@ -233,6 +234,8 @@ PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1, DEFAULT_GPIO_RESET ) PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002, DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) +PEGASUS_DEV( "ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM, 0x4010, + DEFAULT_GPIO_RESET | PEGASUS_II ) PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304, DEFAULT_GPIO_RESET ) PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000, diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index 718f8e2b552b..a72685b96061 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -128,11 +128,13 @@ #define VENDOR_ID_MELCO 0x0411 #define VENDOR_ID_MICRONET 0x3980 #define VENDOR_ID_LONGSHINE 0x07b8 +#define VENDOR_ID_ZYXEL 0x0586 #define PRODUCT_ID_RTL8150 0x8150 #define PRODUCT_ID_LUAKTX 0x0012 #define PRODUCT_ID_LCS8138TX 0x401a #define PRODUCT_ID_SP128AR 0x0003 +#define PRODUCT_ID_PRESTIGE 0x401a #undef EEPROM_WRITE @@ -142,6 +144,7 @@ static struct usb_device_id rtl8150_table[] = { {USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)}, {USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)}, {USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)}, + {USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)}, {} }; @@ -172,6 +175,8 @@ static inline struct sk_buff *pull_skb(rtl8150_t *); static void rtl8150_disconnect(struct usb_interface *intf); static int rtl8150_probe(struct usb_interface *intf, const struct usb_device_id *id); +static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message); +static int rtl8150_resume(struct usb_interface *intf); static const char driver_name [] = "rtl8150"; @@ -180,6 +185,8 @@ static struct usb_driver rtl8150_driver = { .probe = rtl8150_probe, .disconnect = rtl8150_disconnect, .id_table = rtl8150_table, + .suspend = rtl8150_suspend, + .resume = rtl8150_resume }; /* @@ -235,9 +242,11 @@ static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size) usb_fill_control_urb(dev->ctrl_urb, dev->udev, usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr, &dev->rx_creg, size, ctrl_callback, dev); - if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) + if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) { + if (ret == -ENODEV) + netif_device_detach(dev->netdev); err("control request submission failed: %d", ret); - else + } else set_bit(RX_REG_SET, &dev->flags); return ret; @@ -413,6 +422,7 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs) struct sk_buff *skb; struct net_device *netdev; u16 rx_stat; + int status; dev = urb->context; if (!dev) @@ -462,7 +472,10 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs) goon: usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); - if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) { + status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC); + if (status == -ENODEV) + netif_device_detach(dev->netdev); + else if (status) { set_bit(RX_URB_FAIL, &dev->flags); goto resched; } else { @@ -478,6 +491,7 @@ static void rx_fixup(unsigned long data) { rtl8150_t *dev; struct sk_buff *skb; + int status; dev = (rtl8150_t *)data; @@ -496,10 +510,13 @@ static void rx_fixup(unsigned long data) usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); try_again: - if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) { + status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC); + if (status == -ENODEV) { + netif_device_detach(dev->netdev); + } else if (status) { set_bit(RX_URB_FAIL, &dev->flags); goto tlsched; - } else { + } else { clear_bit(RX_URB_FAIL, &dev->flags); } @@ -571,12 +588,43 @@ static void intr_callback(struct urb *urb, struct pt_regs *regs) resubmit: status = usb_submit_urb (urb, SLAB_ATOMIC); - if (status) + if (status == -ENODEV) + netif_device_detach(dev->netdev); + else if (status) err ("can't resubmit intr, %s-%s/input0, status %d", dev->udev->bus->bus_name, dev->udev->devpath, status); } +static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message) +{ + rtl8150_t *dev = usb_get_intfdata(intf); + + netif_device_detach(dev->netdev); + + if (netif_running(dev->netdev)) { + usb_kill_urb(dev->rx_urb); + usb_kill_urb(dev->intr_urb); + } + return 0; +} + +static int rtl8150_resume(struct usb_interface *intf) +{ + rtl8150_t *dev = usb_get_intfdata(intf); + + netif_device_attach(dev->netdev); + if (netif_running(dev->netdev)) { + dev->rx_urb->status = 0; + dev->rx_urb->actual_length = 0; + read_bulk_callback(dev->rx_urb, NULL); + + dev->intr_urb->status = 0; + dev->intr_urb->actual_length = 0; + intr_callback(dev->intr_urb, NULL); + } + return 0; +} /* ** @@ -687,9 +735,14 @@ static int rtl8150_start_xmit(struct sk_buff *skb, struct net_device *netdev) usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), skb->data, count, write_bulk_callback, dev); if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) { - warn("failed tx_urb %d\n", res); - dev->stats.tx_errors++; - netif_start_queue(netdev); + /* Can we get/handle EPIPE here? */ + if (res == -ENODEV) + netif_device_detach(dev->netdev); + else { + warn("failed tx_urb %d\n", res); + dev->stats.tx_errors++; + netif_start_queue(netdev); + } } else { dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; @@ -726,16 +779,25 @@ static int rtl8150_open(struct net_device *netdev) usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); - if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) + if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) { + if (res == -ENODEV) + netif_device_detach(dev->netdev); warn("%s: rx_urb submit failed: %d", __FUNCTION__, res); + return res; + } usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3), dev->intr_buff, INTBUFSIZE, intr_callback, dev, dev->intr_interval); - if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) + if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) { + if (res == -ENODEV) + netif_device_detach(dev->netdev); warn("%s: intr_urb submit failed: %d", __FUNCTION__, res); - netif_start_queue(netdev); + usb_kill_urb(dev->rx_urb); + return res; + } enable_net_traffic(dev); set_carrier(netdev); + netif_start_queue(netdev); return res; } @@ -910,6 +972,7 @@ static void rtl8150_disconnect(struct usb_interface *intf) if (dev) { set_bit(RTL8150_UNPLUG, &dev->flags); tasklet_disable(&dev->tl); + tasklet_kill(&dev->tl); unregister_netdev(dev->netdev); unlink_all_urbs(dev); free_all_urbs(dev); diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 8bd44fda5eaf..f5b9438c94f0 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -62,15 +62,6 @@ config USB_SERIAL_AIRPRIME To compile this driver as a module, choose M here: the module will be called airprime. -config USB_SERIAL_ANYDATA - tristate "USB AnyData CDMA Wireless Driver" - depends on USB_SERIAL - help - Say Y here if you want to use a AnyData CDMA device. - - To compile this driver as a module, choose M here: the - module will be called anydata. - config USB_SERIAL_ARK3116 tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)" depends on USB_SERIAL && EXPERIMENTAL @@ -456,6 +447,17 @@ config USB_SERIAL_SAFE_PADDED bool "USB Secure Encapsulated Driver - Padded" depends on USB_SERIAL_SAFE +config USB_SERIAL_SIERRAWIRELESS + tristate "USB Sierra Wireless Driver" + depends on USB_SERIAL + help + Say M here if you want to use a Sierra Wireless device (if + using an PC 5220 or AC580 please use the Airprime driver + instead). + + To compile this driver as a module, choose M here: the + module will be called sierra. + config USB_SERIAL_TI tristate "USB TI 3410/5052 Serial Driver" depends on USB_SERIAL @@ -491,15 +493,18 @@ config USB_SERIAL_XIRCOM module will be called keyspan_pda. config USB_SERIAL_OPTION - tristate "USB driver for GSM modems" + tristate "USB driver for GSM and CDMA modems" depends on USB_SERIAL help - Say Y here if you have an "Option" GSM PCMCIA card - (or an OEM version: branded Huawei, Audiovox, or Novatel). + Say Y here if you have a GSM or CDMA modem that's connected to USB. + + This driver also supports several PCMCIA cards which have a + built-in OHCI-USB adapter and an internally-connected GSM modem. + The USB bus on these cards is not accessible externally. - These cards feature a built-in OHCI-USB adapter and an - internally-connected GSM modem. The USB bus is not - accessible externally. + Supported devices include (some of?) those made by: + Option, Huawei, Audiovox, Sierra Wireless, Novatel Wireless, or + Anydata. To compile this driver as a module, choose M here: the module will be called option. diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 5a0960fc9d3e..8efed2ce1ba3 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -12,7 +12,6 @@ usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o -obj-$(CONFIG_USB_SERIAL_ANYDATA) += anydata.o obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o @@ -39,6 +38,7 @@ obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o +obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 94b9ba0ff875..62082532a8b3 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -13,7 +13,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static struct usb_device_id id_table [] = { { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */ diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c deleted file mode 100644 index 343f6f228220..000000000000 --- a/drivers/usb/serial/anydata.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * AnyData CDMA Serial USB driver - * - * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include "usb-serial.h" - -static struct usb_device_id id_table [] = { - { USB_DEVICE(0x16d5, 0x6501) }, /* AirData CDMA device */ - { }, -}; -MODULE_DEVICE_TABLE(usb, id_table); - -/* if overridden by the user, then use their value for the size of the - * read and write urbs */ -static int buffer_size; -static int debug; - -static struct usb_driver anydata_driver = { - .name = "anydata", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table, - .no_dynamic_id = 1, -}; - -static int anydata_open(struct usb_serial_port *port, struct file *filp) -{ - char *buffer; - int result = 0; - - dbg("%s - port %d", __FUNCTION__, port->number); - - if (buffer_size) { - /* override the default buffer sizes */ - buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!buffer) { - dev_err(&port->dev, "%s - out of memory.\n", - __FUNCTION__); - return -ENOMEM; - } - kfree (port->read_urb->transfer_buffer); - port->read_urb->transfer_buffer = buffer; - port->read_urb->transfer_buffer_length = buffer_size; - - buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!buffer) { - dev_err(&port->dev, "%s - out of memory.\n", - __FUNCTION__); - return -ENOMEM; - } - kfree (port->write_urb->transfer_buffer); - port->write_urb->transfer_buffer = buffer; - port->write_urb->transfer_buffer_length = buffer_size; - port->bulk_out_size = buffer_size; - } - - /* Start reading from the device */ - usb_fill_bulk_urb(port->read_urb, port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - usb_serial_generic_write_bulk_callback, port); - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __FUNCTION__, result); - - return result; -} - -static struct usb_serial_driver anydata_device = { - .driver = { - .owner = THIS_MODULE, - .name = "anydata", - }, - .id_table = id_table, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, - .num_ports = 1, - .open = anydata_open, -}; - -static int __init anydata_init(void) -{ - int retval; - - retval = usb_serial_register(&anydata_device); - if (retval) - return retval; - retval = usb_register(&anydata_driver); - if (retval) - usb_serial_deregister(&anydata_device); - return retval; -} - -static void __exit anydata_exit(void) -{ - usb_deregister(&anydata_driver); - usb_serial_deregister(&anydata_device); -} - -module_init(anydata_init); -module_exit(anydata_exit); -MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); -module_param(buffer_size, int, 0); -MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers"); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 8dec796222a0..970d9ef0a7a5 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -21,7 +21,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static int debug; diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 3faa7aa0111a..70ece9e01ce4 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -74,7 +74,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "belkin_sa.h" static int debug; diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index f2d993b70c18..6542f220468f 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -13,7 +13,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static int usb_serial_device_match (struct device *dev, struct device_driver *drv) { diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 3d456b32c316..3a9073dbfe6a 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -17,11 +17,10 @@ #include <linux/tty.h> #include <linux/console.h> #include <linux/usb.h> +#include <linux/usb/serial.h> static int debug; -#include "usb-serial.h" - struct usbcons_info { int magic; int break_flag; diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index df0a4f98b4ae..486c7411b9a7 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -26,7 +26,7 @@ #include <linux/moduleparam.h> #include <linux/usb.h> #include <asm/uaccess.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> /* * Version Information diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 49b51ab0d4cb..6286aba86fae 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -39,7 +39,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #define CYBERJACK_LOCAL_BUF_SIZE 32 diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 4ff2dfb299bd..ee70fddcab60 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -59,11 +59,11 @@ #include <linux/moduleparam.h> #include <linux/spinlock.h> #include <linux/usb.h> +#include <linux/usb/serial.h> #include <linux/serial.h> #include <linux/delay.h> #include <asm/uaccess.h> -#include "usb-serial.h" #include "cypress_m8.h" diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 6953d3ef5738..9b225183fc7a 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -246,7 +246,7 @@ #include <asm/uaccess.h> #include <linux/usb.h> #include <linux/wait.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> /* Defines */ diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 1e2b31eeb497..daafe405d86d 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -62,7 +62,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static int debug; diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c index debc3b0f9662..5169c2d154ab 100644 --- a/drivers/usb/serial/ezusb.c +++ b/drivers/usb/serial/ezusb.c @@ -15,7 +15,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ #define CPUCS_REG 0x7F92 diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8a74b19f1283..c6115aa1b445 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -257,7 +257,7 @@ #include <asm/uaccess.h> #include <linux/usb.h> #include <linux/serial.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "ftdi_sio.h" /* @@ -306,6 +306,8 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { static struct usb_device_id id_table_combined [] = { + { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) }, @@ -313,6 +315,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, @@ -336,6 +339,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) }, @@ -500,6 +504,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, + { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -548,11 +555,17 @@ struct ftdi_private { spinlock_t rx_lock; /* spinlock for receive state */ struct work_struct rx_work; int rx_processed; + unsigned long rx_bytes; __u16 interface; /* FT2232C port interface (0 for FT232/245) */ int force_baud; /* if non-zero, force the baud rate to this value */ int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */ + + spinlock_t tx_lock; /* spinlock for transmit state */ + unsigned long tx_bytes; + unsigned long tx_outstanding_bytes; + unsigned long tx_outstanding_urbs; }; /* Used for TIOCMIWAIT */ @@ -626,6 +639,9 @@ static struct usb_serial_driver ftdi_sio_device = { #define HIGH 1 #define LOW 0 +/* number of outstanding urbs to prevent userspace DoS from happening */ +#define URB_UPPER_LIMIT 42 + /* * *************************************************************************** * Utlity functions @@ -1156,6 +1172,7 @@ static int ftdi_sio_attach (struct usb_serial *serial) } spin_lock_init(&priv->rx_lock); + spin_lock_init(&priv->tx_lock); init_waitqueue_head(&priv->delta_msr_wait); /* This will push the characters through immediately rather than queue a task to deliver them */ @@ -1270,6 +1287,13 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) dbg("%s", __FUNCTION__); + spin_lock_irqsave(&priv->tx_lock, flags); + priv->tx_bytes = 0; + spin_unlock_irqrestore(&priv->tx_lock, flags); + spin_lock_irqsave(&priv->rx_lock, flags); + priv->rx_bytes = 0; + spin_unlock_irqrestore(&priv->rx_lock, flags); + if (port->tty) port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; @@ -1372,6 +1396,7 @@ static int ftdi_write (struct usb_serial_port *port, int data_offset ; /* will be 1 for the SIO and 0 otherwise */ int status; int transfer_size; + unsigned long flags; dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count); @@ -1379,6 +1404,13 @@ static int ftdi_write (struct usb_serial_port *port, dbg("write request of 0 bytes"); return 0; } + spin_lock_irqsave(&priv->tx_lock, flags); + if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) { + spin_unlock_irqrestore(&priv->tx_lock, flags); + dbg("%s - write limit hit\n", __FUNCTION__); + return 0; + } + spin_unlock_irqrestore(&priv->tx_lock, flags); data_offset = priv->write_offset; dbg("data_offset set to %d",data_offset); @@ -1445,6 +1477,12 @@ static int ftdi_write (struct usb_serial_port *port, err("%s - failed submitting write urb, error %d", __FUNCTION__, status); count = status; kfree (buffer); + } else { + spin_lock_irqsave(&priv->tx_lock, flags); + ++priv->tx_outstanding_urbs; + priv->tx_outstanding_bytes += count; + priv->tx_bytes += count; + spin_unlock_irqrestore(&priv->tx_lock, flags); } /* we are done with this urb, so let the host driver @@ -1460,7 +1498,11 @@ static int ftdi_write (struct usb_serial_port *port, static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs) { + unsigned long flags; struct usb_serial_port *port = (struct usb_serial_port *)urb->context; + struct ftdi_private *priv; + int data_offset; /* will be 1 for the SIO and 0 otherwise */ + unsigned long countback; /* free up the transfer buffer, as usb_free_urb() does not do this */ kfree (urb->transfer_buffer); @@ -1472,34 +1514,67 @@ static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs) return; } + priv = usb_get_serial_port_data(port); + if (!priv) { + dbg("%s - bad port private data pointer - exiting", __FUNCTION__); + return; + } + /* account for transferred data */ + countback = urb->actual_length; + data_offset = priv->write_offset; + if (data_offset > 0) { + /* Subtract the control bytes */ + countback -= (data_offset * ((countback + (PKTSZ - 1)) / PKTSZ)); + } + spin_lock_irqsave(&priv->tx_lock, flags); + --priv->tx_outstanding_urbs; + priv->tx_outstanding_bytes -= countback; + spin_unlock_irqrestore(&priv->tx_lock, flags); + usb_serial_port_softint(port); } /* ftdi_write_bulk_callback */ static int ftdi_write_room( struct usb_serial_port *port ) { + struct ftdi_private *priv = usb_get_serial_port_data(port); + int room; + unsigned long flags; + dbg("%s - port %d", __FUNCTION__, port->number); - /* - * We really can take anything the user throws at us - * but let's pick a nice big number to tell the tty - * layer that we have lots of free space - */ - return 2048; + spin_lock_irqsave(&priv->tx_lock, flags); + if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) { + /* + * We really can take anything the user throws at us + * but let's pick a nice big number to tell the tty + * layer that we have lots of free space + */ + room = 2048; + } else { + room = 0; + } + spin_unlock_irqrestore(&priv->tx_lock, flags); + return room; } /* ftdi_write_room */ static int ftdi_chars_in_buffer (struct usb_serial_port *port) { /* ftdi_chars_in_buffer */ + struct ftdi_private *priv = usb_get_serial_port_data(port); + int buffered; + unsigned long flags; + dbg("%s - port %d", __FUNCTION__, port->number); - /* - * We can't really account for how much data we - * have sent out, but hasn't made it through to the - * device, so just tell the tty layer that everything - * is flushed. - */ - return 0; + spin_lock_irqsave(&priv->tx_lock, flags); + buffered = (int)priv->tx_outstanding_bytes; + spin_unlock_irqrestore(&priv->tx_lock, flags); + if (buffered < 0) { + err("%s outstanding tx bytes is negative!", __FUNCTION__); + buffered = 0; + } + return buffered; } /* ftdi_chars_in_buffer */ @@ -1509,6 +1584,8 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs) struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct tty_struct *tty; struct ftdi_private *priv; + unsigned long countread; + unsigned long flags; if (urb->number_of_packets > 0) { err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__, @@ -1543,6 +1620,13 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs) return; } + /* count data bytes, but not status bytes */ + countread = urb->actual_length; + countread -= 2 * ((countread + (PKTSZ - 1)) / PKTSZ); + spin_lock_irqsave(&priv->rx_lock, flags); + priv->rx_bytes += countread; + spin_unlock_irqrestore(&priv->rx_lock, flags); + ftdi_process_read(port); } /* ftdi_read_bulk_callback */ diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 6ab2ac845bd7..77299996f7ee 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -32,10 +32,19 @@ #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ +/* www.canusb.com Lawicel CANUSB device */ +#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ + +/* AlphaMicro Components AMC-232USB01 device */ +#define FTDI_AMC232_PID 0xFF00 /* Product Id */ + /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ #define FTDI_ACTZWAVE_PID 0xF2D0 +/* www.starting-point-systems.com µChameleon device */ +#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ + /* www.irtrans.de device */ #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ @@ -179,6 +188,10 @@ /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ + +#define FTDI_TNC_X_PID 0xEBE0 + /* * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). * All of these devices use FTDI's vendor ID (0x0403). @@ -442,6 +455,23 @@ */ #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ +/* + * ThorLabs USB motor drivers + */ +#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ + +/* + * Testo products (http://www.testo.com/) + * Submitted by Colin Leroy + */ +#define TESTO_VID 0x128D +#define TESTO_USB_INTERFACE_PID 0x0001 + +/* + * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + */ +#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index 803721b97e2e..77b977206a8c 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -13,7 +13,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static struct usb_device_id id_table [] = { { USB_DEVICE(0x1404, 0xcddc) }, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 1f5d1620baa1..727852634be9 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -35,6 +35,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> +#include <linux/usb/serial.h> /* the mode to be set when the port ist opened */ static int initial_mode = 1; @@ -42,8 +43,6 @@ static int initial_mode = 1; /* debug flag */ static int debug = 0; -#include "usb-serial.h" - #define GARMIN_VENDOR_ID 0x091E /* diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 945b8bb38c92..172713556393 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -17,8 +17,8 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/usb.h> +#include <linux/usb/serial.h> #include <asm/uaccess.h> -#include "usb-serial.h" static int debug; @@ -285,6 +285,7 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *reg if (result) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); } +EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback); void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs) { diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 7e06358b0310..ebcac701b069 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -17,7 +17,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> /* * Version Information diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index bd2c05dac2a9..c49976c3ad52 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -44,7 +44,7 @@ #include <linux/wait.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "io_edgeport.h" #include "io_ionsp.h" /* info for the iosp messages */ #include "io_16654.h" /* 16654 UART defines */ diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 723a12ae87b5..17c5b1d2311a 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -39,8 +39,8 @@ #include <asm/uaccess.h> #include <asm/semaphore.h> #include <linux/usb.h> +#include <linux/usb/serial.h> -#include "usb-serial.h" #include "io_16654.h" #include "io_usbvend.h" #include "io_ti.h" diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index dbcfe172a5cc..9840bade79f9 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -55,7 +55,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "ipaq.h" #define KP_RETRIES 100 @@ -70,6 +70,8 @@ static __u16 product, vendor; static int debug; +static int connect_retries = KP_RETRIES; +static int initial_wait; /* Function prototypes for an ipaq */ static int ipaq_open (struct usb_serial_port *port, struct file *filp); @@ -248,6 +250,9 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ + { USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */ + { USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */ + { USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */ { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ @@ -582,7 +587,7 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) struct ipaq_private *priv; struct ipaq_packet *pkt; int i, result = 0; - int retries = KP_RETRIES; + int retries = connect_retries; dbg("%s - port %d", __FUNCTION__, port->number); @@ -646,16 +651,12 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) port->read_urb->transfer_buffer_length = URBDATA_SIZE; port->bulk_out_size = port->write_urb->transfer_buffer_length = URBDATA_SIZE; + msleep(1000*initial_wait); /* Start reading from the device */ usb_fill_bulk_urb(port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, ipaq_read_bulk_callback, port); - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) { - err("%s - failed submitting read urb, error %d", __FUNCTION__, result); - goto error; - } /* * Send out control message observed in win98 sniffs. Not sure what @@ -670,8 +671,14 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21, 0x1, 0, NULL, 0, 100); if (result == 0) { + result = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (result) { + err("%s - failed submitting read urb, error %d", __FUNCTION__, result); + goto error; + } return 0; } + msleep(1000); } err("%s - failed doing control urb, error %d", __FUNCTION__, result); goto error; @@ -854,6 +861,7 @@ static void ipaq_write_bulk_callback(struct urb *urb, struct pt_regs *regs) if (urb->status) { dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); + return; } spin_lock_irqsave(&write_list_lock, flags); @@ -966,3 +974,9 @@ MODULE_PARM_DESC(vendor, "User specified USB idVendor"); module_param(product, ushort, 0); MODULE_PARM_DESC(product, "User specified USB idProduct"); + +module_param(connect_retries, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (one second each)"); + +module_param(initial_wait, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(initial_wait, "Time to wait before attempting a connection (in seconds)"); diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index a4a0bfeaab00..87306cb6f9f5 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -46,8 +46,8 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/usb.h> +#include <linux/usb/serial.h> #include <asm/uaccess.h> -#include "usb-serial.h" /* * Version Information @@ -373,6 +373,8 @@ static void ipw_write_bulk_callback(struct urb *urb, struct pt_regs *regs) dbg("%s", __FUNCTION__); + port->write_urb_busy = 0; + if (urb->status) dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 2cf1fed3de43..1738b0b6a376 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -57,7 +57,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> /* * Version Information diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index d7c58f1bc960..015ad6cc1bbb 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -107,7 +107,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "keyspan.h" static int debug; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 03ab3c0f3cce..49b8dc039d1f 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -78,6 +78,7 @@ #include <linux/workqueue.h> #include <asm/uaccess.h> #include <linux/usb.h> +#include <linux/usb/serial.h> static int debug; @@ -107,8 +108,6 @@ struct ezusb_hex_record { #include "xircom_pgs_fw.h" #endif -#include "usb-serial.h" - /* * Version Information */ diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index b45ff3e7ab40..2a2f3e2da055 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -55,7 +55,7 @@ #include <linux/module.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "kl5kusb105.h" static int debug; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 457733374772..d50dce034958 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -46,8 +46,8 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> +#include <linux/usb/serial.h> #include <linux/ioctl.h> -#include "usb-serial.h" #include "kobil_sct.h" static int debug; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index ca05d3275f3e..f4d4305c2c02 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -75,7 +75,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "mct_u232.h" /* diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 7f544081032e..ac3f8b5d2c49 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -14,7 +14,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static int debug; diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index cfb711a21a45..e49f40913c27 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -46,7 +46,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static int debug; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 78ad4b3126a6..c856e6f40e22 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -9,39 +9,14 @@ Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> - History: - - 2005-05-19 v0.1 Initial version, based on incomplete docs - and analysis of misbehavior with the standard driver - 2005-05-20 v0.2 Extended the input buffer to avoid losing - random 64-byte chunks of data - 2005-05-21 v0.3 implemented chars_in_buffer() - turned on low_latency - simplified the code somewhat - 2005-05-24 v0.4 option_write() sometimes deadlocked under heavy load - removed some dead code - added sponsor notice - coding style clean-up - 2005-06-20 v0.4.1 add missing braces :-/ - killed end-of-line whitespace - 2005-07-15 v0.4.2 rename WLAN product to FUSION, add FUSION2 - 2005-09-10 v0.4.3 added HUAWEI E600 card and Audiovox AirCard - 2005-09-20 v0.4.4 increased recv buffer size: the card sometimes - wants to send >2000 bytes. - 2006-04-10 v0.5 fixed two array overrun errors :-/ - 2006-04-21 v0.5.1 added support for Sierra Wireless MC8755 - 2006-05-15 v0.6 re-enable multi-port support - 2006-06-01 v0.6.1 add COBRA - 2006-06-01 v0.6.2 add backwards-compatibility stuff - 2006-06-01 v0.6.3 add Novatel Wireless - 2006-06-01 v0.7 Option => GSM + History: see the git log. Work sponsored by: Sigos GmbH, Germany <info@sigos.de> This driver exists because the "normal" serial driver doesn't work too well with GSM modems. Issues: - data loss -- one single Receive URB is not nearly enough - - nonstandard flow (Option devices) and multiplex (Sierra) control + - nonstandard flow (Option devices) control - controlling the baud rate doesn't make sense This driver is named "option" because the most common device it's @@ -53,7 +28,7 @@ device features. */ -#define DRIVER_VERSION "v0.7.0" +#define DRIVER_VERSION "v0.7.1" #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" #define DRIVER_DESC "USB Driver for GSM modems" @@ -64,7 +39,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> /* Function prototypes */ static int option_open(struct usb_serial_port *port, struct file *filp); @@ -95,27 +70,29 @@ static int option_send_setup(struct usb_serial_port *port); #define OPTION_VENDOR_ID 0x0AF0 #define HUAWEI_VENDOR_ID 0x12D1 #define AUDIOVOX_VENDOR_ID 0x0F3D -#define SIERRAWIRELESS_VENDOR_ID 0x1199 #define NOVATELWIRELESS_VENDOR_ID 0x1410 +#define ANYDATA_VENDOR_ID 0x16d5 #define OPTION_PRODUCT_OLD 0x5000 #define OPTION_PRODUCT_FUSION 0x6000 #define OPTION_PRODUCT_FUSION2 0x6300 #define OPTION_PRODUCT_COBRA 0x6500 +#define OPTION_PRODUCT_COBRA2 0x6600 #define HUAWEI_PRODUCT_E600 0x1001 #define AUDIOVOX_PRODUCT_AIRCARD 0x0112 -#define SIERRAWIRELESS_PRODUCT_MC8755 0x6802 #define NOVATELWIRELESS_PRODUCT_U740 0x1400 +#define ANYDATA_PRODUCT_ID 0x6501 static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, - { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -124,13 +101,11 @@ static struct usb_device_id option_ids1[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, - { } /* Terminating entry */ -}; -static struct usb_device_id option_ids3[] = { - { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -147,37 +122,11 @@ static struct usb_driver option_driver = { /* The card has three separate interfaces, which the serial driver * recognizes separately, thus num_port=1. */ -static struct usb_serial_driver option_3port_device = { - .driver = { - .owner = THIS_MODULE, - .name = "option", - }, - .description = "GSM modem (3-port)", - .id_table = option_ids3, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, - .num_ports = 3, - .open = option_open, - .close = option_close, - .write = option_write, - .write_room = option_write_room, - .chars_in_buffer = option_chars_in_buffer, - .throttle = option_rx_throttle, - .unthrottle = option_rx_unthrottle, - .set_termios = option_set_termios, - .break_ctl = option_break_ctl, - .tiocmget = option_tiocmget, - .tiocmset = option_tiocmset, - .attach = option_startup, - .shutdown = option_shutdown, - .read_int_callback = option_instat_callback, -}; static struct usb_serial_driver option_1port_device = { .driver = { .owner = THIS_MODULE, - .name = "option", + .name = "option1", }, .description = "GSM modem (1-port)", .id_table = option_ids1, @@ -241,9 +190,6 @@ static int __init option_init(void) retval = usb_serial_register(&option_1port_device); if (retval) goto failed_1port_device_register; - retval = usb_serial_register(&option_3port_device); - if (retval) - goto failed_3port_device_register; retval = usb_register(&option_driver); if (retval) goto failed_driver_register; @@ -253,8 +199,6 @@ static int __init option_init(void) return 0; failed_driver_register: - usb_serial_deregister (&option_3port_device); -failed_3port_device_register: usb_serial_deregister (&option_1port_device); failed_1port_device_register: return retval; @@ -263,7 +207,6 @@ failed_1port_device_register: static void __exit option_exit(void) { usb_deregister (&option_driver); - usb_serial_deregister (&option_3port_device); usb_serial_deregister (&option_1port_device); } @@ -652,7 +595,6 @@ static void option_setup_urbs(struct usb_serial *serial) dbg("%s", __FUNCTION__); - for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index de93a2b909e7..65e4d046951a 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -27,7 +27,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "pl2303.h" /* @@ -52,6 +52,7 @@ struct pl2303_buf { static struct usb_device_id id_table [] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, @@ -78,7 +79,8 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) }, { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) }, { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) }, - { USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) }, + { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) }, + { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 7f29e81d3e35..55195e76eb6f 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -10,6 +10,7 @@ #define PL2303_VENDOR_ID 0x067b #define PL2303_PRODUCT_ID 0x2303 #define PL2303_PRODUCT_ID_RSAQ2 0x04bb +#define PL2303_PRODUCT_ID_DCU11 0x1234 #define PL2303_PRODUCT_ID_PHAROS 0xaaa0 #define PL2303_PRODUCT_ID_RSAQ3 0xaaa2 @@ -81,6 +82,10 @@ #define SPEEDDRAGON_VENDOR_ID 0x0e55 #define SPEEDDRAGON_PRODUCT_ID 0x110b -/* Ours Technology Inc DKU-5 clone, chipset: Prolific Technology Inc */ -#define OTI_VENDOR_ID 0x0ea0 -#define OTI_PRODUCT_ID 0x6858 +/* DATAPILOT Universal-2 Phone Cable */ +#define DATAPILOT_U2_VENDOR_ID 0x0731 +#define DATAPILOT_U2_PRODUCT_ID 0x2003 + +/* Belkin "F5U257" Serial Adapter */ +#define BELKIN_VENDOR_ID 0x050d +#define BELKIN_PRODUCT_ID 0x0257 diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 897d8447252b..789771ecdb11 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -71,7 +71,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #ifndef CONFIG_USB_SAFE_PADDED diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c new file mode 100644 index 000000000000..d29638daa987 --- /dev/null +++ b/drivers/usb/serial/sierra.c @@ -0,0 +1,75 @@ +/* + * Sierra Wireless CDMA Wireless Serial USB driver + * + * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com> + * Original Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +static struct usb_device_id id_table [] = { + { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ + { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ + { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ + { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ + { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ + { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */ + { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */ + { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */ + /* Following devices are supported in the airprime.c driver */ + /* { USB_DEVICE(0x1199, 0x0112) }, */ /* Sierra Wireless AirCard 580 */ + /* { USB_DEVICE(0x0F3D, 0x0112) }, */ /* AirPrime/Sierra PC 5220 */ + { } +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver sierra_driver = { + .name = "sierra_wireless", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + +static struct usb_serial_driver sierra_device = { + .driver = { + .owner = THIS_MODULE, + .name = "Sierra_Wireless", + }, + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 3, +}; + +static int __init sierra_init(void) +{ + int retval; + + retval = usb_serial_register(&sierra_device); + if (retval) + return retval; + retval = usb_register(&sierra_driver); + if (retval) + usb_serial_deregister(&sierra_device); + return retval; +} + +static void __exit sierra_exit(void) +{ + usb_deregister(&sierra_driver); + usb_serial_deregister(&sierra_device); +} + +module_init(sierra_init); +module_exit(sierra_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index a9afff31a921..ac9b8ee52d44 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -83,8 +83,8 @@ #include <asm/uaccess.h> #include <asm/semaphore.h> #include <linux/usb.h> +#include <linux/usb/serial.h> -#include "usb-serial.h" #include "ti_usb_3410_5052.h" #include "ti_fw_3410.h" /* firmware image for 3410 */ #include "ti_fw_5052.h" /* firmware image for 5052 */ diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index b59a0536ea5c..e06a41bd0f3b 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -31,7 +31,7 @@ #include <linux/smp_lock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "pl2303.h" /* @@ -40,6 +40,8 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/" #define DRIVER_DESC "USB Serial Driver core" +static void port_free(struct usb_serial_port *port); + /* Driver structure we register with the USB core */ static struct usb_driver usb_serial_driver = { .name = "usbserial", @@ -146,23 +148,10 @@ static void destroy_serial(struct kref *kref) port = serial->port[i]; if (!port) continue; - usb_kill_urb(port->read_urb); - usb_free_urb(port->read_urb); - usb_kill_urb(port->write_urb); - usb_free_urb(port->write_urb); - usb_kill_urb(port->interrupt_in_urb); - usb_free_urb(port->interrupt_in_urb); - usb_kill_urb(port->interrupt_out_urb); - usb_free_urb(port->interrupt_out_urb); - kfree(port->bulk_in_buffer); - kfree(port->bulk_out_buffer); - kfree(port->interrupt_in_buffer); - kfree(port->interrupt_out_buffer); + port_free(port); } } - flush_scheduled_work(); /* port->work */ - usb_put_dev(serial->dev); /* free up any memory that we allocated */ @@ -475,8 +464,10 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int length += sprintf (page+length, " path:%s", tmp); length += sprintf (page+length, "\n"); - if ((length + begin) > (off + count)) + if ((length + begin) > (off + count)) { + usb_serial_put(serial); goto done; + } if ((length + begin) < off) { begin += length; length = 0; @@ -564,6 +555,11 @@ static void port_release(struct device *dev) struct usb_serial_port *port = to_usb_serial_port(dev); dbg ("%s - %s", __FUNCTION__, dev->bus_id); + port_free(port); +} + +static void port_free(struct usb_serial_port *port) +{ usb_kill_urb(port->read_urb); usb_free_urb(port->read_urb); usb_kill_urb(port->write_urb); @@ -576,6 +572,7 @@ static void port_release(struct device *dev) kfree(port->bulk_out_buffer); kfree(port->interrupt_in_buffer); kfree(port->interrupt_out_buffer); + flush_scheduled_work(); /* port->work */ kfree(port); } diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h deleted file mode 100644 index 0f2802a60194..000000000000 --- a/drivers/usb/serial/usb-serial.h +++ /dev/null @@ -1,300 +0,0 @@ -/* - * USB Serial Converter driver - * - * Copyright (C) 1999 - 2005 - * Greg Kroah-Hartman (greg@kroah.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - * - */ - - -#ifndef __LINUX_USB_SERIAL_H -#define __LINUX_USB_SERIAL_H - -#include <linux/kref.h> -#include <linux/mutex.h> - -#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ -#define SERIAL_TTY_MINORS 255 /* loads of devices :) */ - -#define MAX_NUM_PORTS 8 /* The maximum number of ports one device can grab at once */ - -/* parity check flag */ -#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - -/** - * usb_serial_port: structure for the specific ports of a device. - * @serial: pointer back to the struct usb_serial owner of this port. - * @tty: pointer to the corresponding tty for this port. - * @lock: spinlock to grab when updating portions of this structure. - * @mutex: mutex used to synchronize serial_open() and serial_close() - * access for this port. - * @number: the number of the port (the minor number). - * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. - * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. - * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe - * for this port. - * @interrupt_out_buffer: pointer to the interrupt out buffer for this port. - * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes. - * @interrupt_out_urb: pointer to the interrupt out struct urb for this port. - * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe - * for this port. - * @bulk_in_buffer: pointer to the bulk in buffer for this port. - * @read_urb: pointer to the bulk in struct urb for this port. - * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this - * port. - * @bulk_out_buffer: pointer to the bulk out buffer for this port. - * @bulk_out_size: the size of the bulk_out_buffer, in bytes. - * @write_urb: pointer to the bulk out struct urb for this port. - * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this - * port. - * @write_wait: a wait_queue_head_t used by the port. - * @work: work queue entry for the line discipline waking up. - * @open_count: number of times this port has been opened. - * - * This structure is used by the usb-serial core and drivers for the specific - * ports of a device. - */ -struct usb_serial_port { - struct usb_serial * serial; - struct tty_struct * tty; - spinlock_t lock; - struct mutex mutex; - unsigned char number; - - unsigned char * interrupt_in_buffer; - struct urb * interrupt_in_urb; - __u8 interrupt_in_endpointAddress; - - unsigned char * interrupt_out_buffer; - int interrupt_out_size; - struct urb * interrupt_out_urb; - __u8 interrupt_out_endpointAddress; - - unsigned char * bulk_in_buffer; - int bulk_in_size; - struct urb * read_urb; - __u8 bulk_in_endpointAddress; - - unsigned char * bulk_out_buffer; - int bulk_out_size; - struct urb * write_urb; - int write_urb_busy; - __u8 bulk_out_endpointAddress; - - wait_queue_head_t write_wait; - struct work_struct work; - int open_count; - struct device dev; -}; -#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) - -/* get and set the port private data pointer helper functions */ -static inline void *usb_get_serial_port_data (struct usb_serial_port *port) -{ - return dev_get_drvdata(&port->dev); -} - -static inline void usb_set_serial_port_data (struct usb_serial_port *port, void *data) -{ - dev_set_drvdata(&port->dev, data); -} - -/** - * usb_serial - structure used by the usb-serial core for a device - * @dev: pointer to the struct usb_device for this device - * @type: pointer to the struct usb_serial_driver for this device - * @interface: pointer to the struct usb_interface for this device - * @minor: the starting minor number for this device - * @num_ports: the number of ports this device has - * @num_interrupt_in: number of interrupt in endpoints we have - * @num_interrupt_out: number of interrupt out endpoints we have - * @num_bulk_in: number of bulk in endpoints we have - * @num_bulk_out: number of bulk out endpoints we have - * @port: array of struct usb_serial_port structures for the different ports. - * @private: place to put any driver specific information that is needed. The - * usb-serial driver is required to manage this data, the usb-serial core - * will not touch this. Use usb_get_serial_data() and - * usb_set_serial_data() to access this. - */ -struct usb_serial { - struct usb_device * dev; - struct usb_serial_driver * type; - struct usb_interface * interface; - unsigned char minor; - unsigned char num_ports; - unsigned char num_port_pointers; - char num_interrupt_in; - char num_interrupt_out; - char num_bulk_in; - char num_bulk_out; - struct usb_serial_port * port[MAX_NUM_PORTS]; - struct kref kref; - void * private; -}; -#define to_usb_serial(d) container_of(d, struct usb_serial, kref) - -#define NUM_DONT_CARE (-1) - -/* get and set the serial private data pointer helper functions */ -static inline void *usb_get_serial_data (struct usb_serial *serial) -{ - return serial->private; -} - -static inline void usb_set_serial_data (struct usb_serial *serial, void *data) -{ - serial->private = data; -} - -/** - * usb_serial_driver - describes a usb serial driver - * @description: pointer to a string that describes this driver. This string used - * in the syslog messages when a device is inserted or removed. - * @id_table: pointer to a list of usb_device_id structures that define all - * of the devices this structure can support. - * @num_interrupt_in: the number of interrupt in endpoints this device will - * have. - * @num_interrupt_out: the number of interrupt out endpoints this device will - * have. - * @num_bulk_in: the number of bulk in endpoints this device will have. - * @num_bulk_out: the number of bulk out endpoints this device will have. - * @num_ports: the number of different ports this device will have. - * @calc_num_ports: pointer to a function to determine how many ports this - * device has dynamically. It will be called after the probe() - * callback is called, but before attach() - * @probe: pointer to the driver's probe function. - * This will be called when the device is inserted into the system, - * but before the device has been fully initialized by the usb_serial - * subsystem. Use this function to download any firmware to the device, - * or any other early initialization that might be needed. - * Return 0 to continue on with the initialization sequence. Anything - * else will abort it. - * @attach: pointer to the driver's attach function. - * This will be called when the struct usb_serial structure is fully set - * set up. Do any local initialization of the device, or any private - * memory structure allocation at this point in time. - * @shutdown: pointer to the driver's shutdown function. This will be - * called when the device is removed from the system. - * - * This structure is defines a USB Serial driver. It provides all of - * the information that the USB serial core code needs. If the function - * pointers are defined, then the USB serial core code will call them when - * the corresponding tty port functions are called. If they are not - * called, the generic serial function will be used instead. - * - * The driver.owner field should be set to the module owner of this driver. - * The driver.name field should be set to the name of this driver (remember - * it will show up in sysfs, so it needs to be short and to the point. - * Useing the module name is a good idea.) - */ -struct usb_serial_driver { - const char *description; - const struct usb_device_id *id_table; - char num_interrupt_in; - char num_interrupt_out; - char num_bulk_in; - char num_bulk_out; - char num_ports; - - struct list_head driver_list; - struct device_driver driver; - - int (*probe) (struct usb_serial *serial, const struct usb_device_id *id); - int (*attach) (struct usb_serial *serial); - int (*calc_num_ports) (struct usb_serial *serial); - - void (*shutdown) (struct usb_serial *serial); - - int (*port_probe) (struct usb_serial_port *port); - int (*port_remove) (struct usb_serial_port *port); - - /* serial function calls */ - int (*open) (struct usb_serial_port *port, struct file * filp); - void (*close) (struct usb_serial_port *port, struct file * filp); - int (*write) (struct usb_serial_port *port, const unsigned char *buf, int count); - int (*write_room) (struct usb_serial_port *port); - int (*ioctl) (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); - void (*set_termios) (struct usb_serial_port *port, struct termios * old); - void (*break_ctl) (struct usb_serial_port *port, int break_state); - int (*chars_in_buffer) (struct usb_serial_port *port); - void (*throttle) (struct usb_serial_port *port); - void (*unthrottle) (struct usb_serial_port *port); - int (*tiocmget) (struct usb_serial_port *port, struct file *file); - int (*tiocmset) (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear); - - void (*read_int_callback)(struct urb *urb, struct pt_regs *regs); - void (*write_int_callback)(struct urb *urb, struct pt_regs *regs); - void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs); - void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs); -}; -#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver) - -extern int usb_serial_register(struct usb_serial_driver *driver); -extern void usb_serial_deregister(struct usb_serial_driver *driver); -extern void usb_serial_port_softint(struct usb_serial_port *port); - -extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id); -extern void usb_serial_disconnect(struct usb_interface *iface); - -extern int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest); -extern int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit); - -/* USB Serial console functions */ -#ifdef CONFIG_USB_SERIAL_CONSOLE -extern void usb_serial_console_init (int debug, int minor); -extern void usb_serial_console_exit (void); -extern void usb_serial_console_disconnect(struct usb_serial *serial); -#else -static inline void usb_serial_console_init (int debug, int minor) { } -static inline void usb_serial_console_exit (void) { } -static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} -#endif - -/* Functions needed by other parts of the usbserial core */ -extern struct usb_serial *usb_serial_get_by_index (unsigned int minor); -extern void usb_serial_put(struct usb_serial *serial); -extern int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp); -extern int usb_serial_generic_write (struct usb_serial_port *port, const unsigned char *buf, int count); -extern void usb_serial_generic_close (struct usb_serial_port *port, struct file *filp); -extern int usb_serial_generic_write_room (struct usb_serial_port *port); -extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port); -extern void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *regs); -extern void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs); -extern void usb_serial_generic_shutdown (struct usb_serial *serial); -extern int usb_serial_generic_register (int debug); -extern void usb_serial_generic_deregister (void); - -extern int usb_serial_bus_register (struct usb_serial_driver *device); -extern void usb_serial_bus_deregister (struct usb_serial_driver *device); - -extern struct usb_serial_driver usb_serial_generic_device; -extern struct bus_type usb_serial_bus_type; -extern struct tty_driver *usb_serial_tty_driver; - -static inline void usb_serial_debug_data(int debug, - struct device *dev, - const char *function, int size, - const unsigned char *data) -{ - int i; - - if (debug) { - dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", function, size); - for (i = 0; i < size; ++i) - printk ("%.2x ", data[i]); - printk ("\n"); - } -} - -/* Use our own dbg macro */ -#undef dbg -#define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg); } while (0) - - - -#endif /* ifdef __LINUX_USB_SERIAL_H */ - diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 95a2936e902e..88949f7884ca 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -25,7 +25,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "visor.h" /* @@ -302,7 +302,6 @@ static int visor_open (struct usb_serial_port *port, struct file *filp) spin_lock_irqsave(&priv->lock, flags); priv->bytes_in = 0; priv->bytes_out = 0; - priv->outstanding_urbs = 0; priv->throttled = 0; spin_unlock_irqrestore(&priv->lock, flags); @@ -435,13 +434,25 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf, static int visor_write_room (struct usb_serial_port *port) { + struct visor_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + dbg("%s - port %d", __FUNCTION__, port->number); /* * We really can take anything the user throws at us * but let's pick a nice big number to tell the tty - * layer that we have lots of free space + * layer that we have lots of free space, unless we don't. */ + + spin_lock_irqsave(&priv->lock, flags); + if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) { + spin_unlock_irqrestore(&priv->lock, flags); + dbg("%s - write limit hit\n", __FUNCTION__); + return 0; + } + spin_unlock_irqrestore(&priv->lock, flags); + return 2048; } @@ -758,15 +769,22 @@ static int visor_calc_num_ports (struct usb_serial *serial) static int generic_startup(struct usb_serial *serial) { + struct usb_serial_port **ports = serial->port; struct visor_private *priv; int i; for (i = 0; i < serial->num_ports; ++i) { priv = kzalloc (sizeof(*priv), GFP_KERNEL); - if (!priv) + if (!priv) { + while (i-- != 0) { + priv = usb_get_serial_port_data(ports[i]); + usb_set_serial_port_data(ports[i], NULL); + kfree(priv); + } return -ENOMEM; + } spin_lock_init(&priv->lock); - usb_set_serial_port_data(serial->port[i], priv); + usb_set_serial_port_data(ports[i], priv); } return 0; } @@ -876,7 +894,18 @@ static int clie_5_attach (struct usb_serial *serial) static void visor_shutdown (struct usb_serial *serial) { + struct visor_private *priv; + int i; + dbg("%s", __FUNCTION__); + + for (i = 0; i < serial->num_ports; i++) { + priv = usb_get_serial_port_data(serial->port[i]); + if (priv) { + usb_set_serial_port_data(serial->port[i], NULL); + kfree(priv); + } + } } static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 540438c3f381..6e6c7934be32 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -79,7 +79,7 @@ #include <linux/usb.h> #include <linux/serial_reg.h> #include <linux/serial.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "whiteheat_fw.h" /* firmware for the ConnectTech WhiteHEAT device */ #include "whiteheat.h" /* WhiteHEAT specific commands */ diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 5715291ba540..a4b7df9ff8c1 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -112,13 +112,11 @@ static int slave_configure(struct scsi_device *sdev) if (sdev->scsi_level < SCSI_2) sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2; - /* According to the technical support people at Genesys Logic, - * devices using their chips have problems transferring more than - * 32 KB at a time. In practice people have found that 64 KB - * works okay and that's what Windows does. But we'll be - * conservative; people can always use the sysfs interface to - * increase max_sectors. */ - if (le16_to_cpu(us->pusb_dev->descriptor.idVendor) == USB_VENDOR_ID_GENESYS && + /* Many devices have trouble transfering more than 32KB at a time, + * while others have trouble with more than 64K. At this time we + * are limiting both to 32K (64 sectores). + */ + if ((us->flags & US_FL_MAX_SECTORS_64) && sdev->request_queue->max_sectors > 64) blk_queue_max_sectors(sdev->request_queue, 64); diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index eb7188b3565c..d6acc92a4ae3 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -180,7 +180,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout) if (timeleft <= 0) { US_DEBUGP("%s -- cancelling URB\n", timeleft == 0 ? "Timeout" : "Signal"); - usb_unlink_urb(us->current_urb); + usb_kill_urb(us->current_urb); } /* return the URB status */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c7e84e653df9..b130e170b4a8 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -112,6 +112,19 @@ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), +/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */ +UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100, + "Samsung Info. Systems America, Inc.", + "MP3 Player", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Orgad Shaneh <orgads@gmail.com> */ +UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100, + "Samsung", "MP3 Player", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Christian Leber <christian@leber.de> */ UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100, "TrekStor", @@ -132,6 +145,21 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Mario Rettig <mariorettig@web.de> */ +UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, + "Nokia", + "Nokia 3250", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + +/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and + * Einar Th. Einarsson <einarthered@gmail.com> */ +UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100, + "Nokia", + "N91", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + /* Reported by Jiri Slaby <jirislaby@gmail.com> and * Rene C. Castberg <Rene@Castberg.org> */ UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100, @@ -140,6 +168,13 @@ UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), +/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */ +UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100, + "Nokia", + "E61", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", @@ -206,16 +241,6 @@ UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100, "Finecam S5", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), -/* Patch for Kyocera Finecam L3 - * Submitted by Michael Krauth <michael.krauth@web.de> - * and Alessandro Fracchetti <al.fracchetti@tin.it> - */ -UNUSUAL_DEV( 0x0482, 0x0105, 0x0100, 0x0100, - "Kyocera", - "Finecam L3", - US_SC_SCSI, US_PR_BULK, NULL, - US_FL_FIX_INQUIRY), - /* Reported by Paul Stewart <stewart@wetlogic.net> * This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001, @@ -473,10 +498,11 @@ UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450, US_SC_SCSI, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ), -/* This entry is needed because the device reports Sub=ff */ -UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0600, +/* Submitted by Lars Jacob <jacob.lars@googlemail.com> + * This entry is needed because the device reports Sub=ff */ +UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610, "Sony", - "DSC-T1/T5", + "DSC-T1/T5/H5", US_SC_8070, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), @@ -563,6 +589,13 @@ UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), +/* floppy reports multiple luns */ +UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210, + "SAMSUNG", + "SFD-321U [FW 0C]", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299, "Y-E Data", @@ -598,18 +631,6 @@ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, "Digital Camera EX-20 DSC", US_SC_8070, US_PR_DEVICE, NULL, 0 ), -/* The entry was here before I took over, and had US_SC_RBC. It turns - * out that isn't needed. Additionally, Torsten Eriksson - * <Torsten.Eriksson@bergianska.se> is able to use his device fine - * without this entry at all - but I don't suspect that will be true - * for all users (the protocol is likely needed), so is staying at - * this time. - Phil Dibowitz <phil@ipom.com> - */ -UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200, - "LaCie", - "USB Hard Disk", - US_SC_DEVICE, US_PR_CB, NULL, 0 ), - /* Submitted by Joel Bourquard <numlock@freesurf.ch> * Some versions of this device need the SubClass and Protocol overrides * while others don't. @@ -708,18 +729,22 @@ UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113, * They were originally reported by Alexander Oltu * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com> * respectively. + * + * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz + * <phil@ipom.com> as these flags were made and hard-coded + * special-cases were pulled from scsiglue.c. */ UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Optical", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_GO_SLOW ), + US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ), UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Disk", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_GO_SLOW ), + US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ), /* Reported by Hanno Boeck <hanno@gmx.de> * Taken from the Lycoris Kernel */ @@ -1073,7 +1098,15 @@ UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff, "Optio S/S4", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), - + +/* This is a virtual windows driver CD, which the zd1211rw driver automatically + * converts into a WLAN device. */ +UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, + "ZyXEL", + "G-220F USB-WLAN Install", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE ), + #ifdef CONFIG_USB_STORAGE_ISD200 UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, "ATI", @@ -1196,6 +1229,24 @@ UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Benjamin Schiller <sbenni@gmx.de> + * It is also sold by Easylite as DJ 20 */ +UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103, + "Typhoon", + "My DJ 1820", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64), + +/* David Kuehling <dvdkhlng@gmx.de>: + * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI + * errors when trying to write. + */ +UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, + "C-MEX", + "A-VOX", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Michael Stattmann <michael@stattmann.com> */ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, "Sony Ericsson", @@ -1203,11 +1254,18 @@ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NO_WP_DETECT ), +/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */ +UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000, + "Sony Ericsson", + "M600i", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu> * Tested on hardware version 1.10. * Entry is needed only for the initializer function override. */ -UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x9999, +UNUSUAL_DEV( 0x1019, 0x0c55, 0x0110, 0x0110, "Desknote", "UCR-61S2B", US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init, @@ -1227,6 +1285,15 @@ UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* patch submitted by Davide Perini <perini.davide@dpsoftware.org> + * and Renato Perini <rperini@email.it> + */ +UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, + "Motorola", + "RAZR V3x", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), + /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, "MPIO", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 1185acac4b21..8d7bdcb5924d 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -55,6 +55,7 @@ #include <linux/slab.h> #include <linux/kthread.h> #include <linux/mutex.h> +#include <linux/utsrelease.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -373,8 +374,12 @@ static int usb_stor_control_thread(void * __us) /* lock access to the state */ scsi_lock(host); + /* did the command already complete because of a disconnect? */ + if (!us->srb) + ; /* nothing to do */ + /* indicate that the command is done */ - if (us->srb->result != DID_ABORT << 16) { + else if (us->srb->result != DID_ABORT << 16) { US_DEBUGP("scsi cmd done, result=0x%x\n", us->srb->result); us->srb->scsi_done(us->srb); @@ -478,7 +483,7 @@ static struct us_unusual_dev *find_unusual(const struct usb_device_id *id) } /* Get the unusual_devs entries and the string descriptors */ -static void get_device_info(struct us_data *us, const struct usb_device_id *id) +static int get_device_info(struct us_data *us, const struct usb_device_id *id) { struct usb_device *dev = us->pusb_dev; struct usb_interface_descriptor *idesc = @@ -495,6 +500,11 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) unusual_dev->useTransport; us->flags = USB_US_ORIG_FLAGS(id->driver_info); + if (us->flags & US_FL_IGNORE_DEVICE) { + printk(KERN_INFO USB_STORAGE "device ignored\n"); + return -ENODEV; + } + /* * This flag is only needed when we're in high-speed, so let's * disable it if we're in full-speed @@ -524,7 +534,8 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE)) printk(KERN_NOTICE USB_STORAGE "This device " "(%04x,%04x,%04x S %02x P %02x)" - " has %s in unusual_devs.h\n" + " has %s in unusual_devs.h (kernel" + " %s)\n" " Please send a copy of this message to " "<linux-usb-devel@lists.sourceforge.net>\n", le16_to_cpu(ddesc->idVendor), @@ -532,8 +543,11 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) le16_to_cpu(ddesc->bcdDevice), idesc->bInterfaceSubClass, idesc->bInterfaceProtocol, - msgs[msg]); + msgs[msg], + UTS_RELEASE); } + + return 0; } /* Get the transport settings */ @@ -836,32 +850,34 @@ static void dissociate_dev(struct us_data *us) * the host */ static void quiesce_and_remove_host(struct us_data *us) { + struct Scsi_Host *host = us_to_host(us); + /* Prevent new USB transfers, stop the current command, and * interrupt a SCSI-scan or device-reset delay */ + scsi_lock(host); set_bit(US_FLIDX_DISCONNECTING, &us->flags); + scsi_unlock(host); usb_stor_stop_transport(us); wake_up(&us->delay_wait); /* It doesn't matter if the SCSI-scanning thread is still running. * The thread will exit when it sees the DISCONNECTING flag. */ - /* Wait for the current command to finish, then remove the host */ - mutex_lock(&us->dev_mutex); - mutex_unlock(&us->dev_mutex); - /* queuecommand won't accept any new commands and the control * thread won't execute a previously-queued command. If there * is such a command pending, complete it with an error. */ + mutex_lock(&us->dev_mutex); if (us->srb) { us->srb->result = DID_NO_CONNECT << 16; - scsi_lock(us_to_host(us)); + scsi_lock(host); us->srb->scsi_done(us->srb); us->srb = NULL; - scsi_unlock(us_to_host(us)); + scsi_unlock(host); } + mutex_unlock(&us->dev_mutex); /* Now we own no commands so it's safe to remove the SCSI host */ - scsi_remove_host(us_to_host(us)); + scsi_remove_host(host); } /* Second stage of disconnect processing: deallocate all resources */ @@ -960,7 +976,9 @@ static int storage_probe(struct usb_interface *intf, * of the match from the usb_device_id table, so we can find the * corresponding entry in the private table. */ - get_device_info(us, id); + result = get_device_info(us, id); + if (result) + goto BadDevice; /* Get the transport, protocol, and pipe settings */ result = get_transport(us); diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 5284abe1b5eb..21f3ddbc9080 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -176,8 +176,4 @@ extern void fill_inquiry_response(struct us_data *us, #define scsi_unlock(host) spin_unlock_irq(host->host_lock) #define scsi_lock(host) spin_lock_irq(host->host_lock) - -/* Vendor ID list for devices that require special handling */ -#define USB_VENDOR_ID_GENESYS 0x05e3 /* Genesys Logic */ - #endif |