diff options
Diffstat (limited to 'drivers/usb')
75 files changed, 769 insertions, 703 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index ebd7237230e3..240750881d28 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -22,7 +22,6 @@ config USB_ARCH_HAS_HCD default y if PCMCIA && !M32R # sl811_cs default y if ARM # SL-811 default y if SUPERH # r8a66597-hcd - default y if MICROBLAZE default PCI # many non-PCI SOC chips embed OHCI diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e3861b21e776..e4eca7810bcf 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -609,9 +609,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) acm->throttle = 0; - tasklet_schedule(&acm->urb_task); set_bit(ASYNCB_INITIALIZED, &acm->port.flags); rv = tty_port_block_til_ready(&acm->port, tty, filp); + tasklet_schedule(&acm->urb_task); done: mutex_unlock(&acm->mutex); err_out: @@ -686,15 +686,21 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) /* Perform the closing process and see if we need to do the hardware shutdown */ - if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0) + if (!acm) + return; + if (tty_port_close_start(&acm->port, tty, filp) == 0) { + mutex_lock(&open_mutex); + if (!acm->dev) { + tty_port_tty_set(&acm->port, NULL); + acm_tty_unregister(acm); + tty->driver_data = NULL; + } + mutex_unlock(&open_mutex); return; + } acm_port_down(acm, 0); tty_port_close_end(&acm->port, tty); - mutex_lock(&open_mutex); tty_port_tty_set(&acm->port, NULL); - if (!acm->dev) - acm_tty_unregister(acm); - mutex_unlock(&open_mutex); } static int acm_tty_write(struct tty_struct *tty, diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 333ee02e7b2b..2473cf0c6b1d 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -39,7 +39,7 @@ #define USBTMC_SIZE_IOBUFFER 2048 /* Default USB timeout (in milliseconds) */ -#define USBTMC_TIMEOUT 10 +#define USBTMC_TIMEOUT 5000 /* * Maximum number of read cycles to empty bulk in endpoint during CLEAR and @@ -993,7 +993,7 @@ skip_io_on_zombie: return retval; } -static struct file_operations fops = { +static const struct file_operations fops = { .owner = THIS_MODULE, .read = usbtmc_read, .write = usbtmc_write, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5ce839137ad6..0f857e645058 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -444,7 +444,7 @@ resubmit: static inline int hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt) { - return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), + return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo, tt, NULL, 0, 1000); } diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 33351312327f..a18e3c5dd82e 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -223,6 +223,7 @@ config USB_OTG config USB_GADGET_PXA25X boolean "PXA 25x or IXP 4xx" depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX + select USB_OTG_UTILS help Intel's PXA 25x series XScale ARM-5TE processors include an integrated full speed USB 1.1 device controller. The diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index d5b65962dd36..731150d4b1d9 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -1213,7 +1213,12 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp) tmp &= AMD_UNMASK_BIT(ep->num); writel(tmp, &dev->regs->ep_irqmsk); } - } + } else if (ep->in) { + /* enable ep irq */ + tmp = readl(&dev->regs->ep_irqmsk); + tmp &= AMD_UNMASK_BIT(ep->num); + writel(tmp, &dev->regs->ep_irqmsk); + } } else if (ep->dma) { @@ -2005,18 +2010,17 @@ __acquires(dev->lock) { int tmp; - /* empty queues and init hardware */ - udc_basic_init(dev); - for (tmp = 0; tmp < UDC_EP_NUM; tmp++) { - empty_req_queue(&dev->ep[tmp]); - } - if (dev->gadget.speed != USB_SPEED_UNKNOWN) { spin_unlock(&dev->lock); driver->disconnect(&dev->gadget); spin_lock(&dev->lock); } - /* init */ + + /* empty queues and init hardware */ + udc_basic_init(dev); + for (tmp = 0; tmp < UDC_EP_NUM; tmp++) + empty_req_queue(&dev->ep[tmp]); + udc_setup_endpoints(dev); } @@ -2472,6 +2476,13 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix) } } + } else if (!use_dma && ep->in) { + /* disable interrupt */ + tmp = readl( + &dev->regs->ep_irqmsk); + tmp |= AMD_BIT(ep->num); + writel(tmp, + &dev->regs->ep_irqmsk); } } /* clear status bits */ @@ -3279,6 +3290,17 @@ static int udc_pci_probe( goto finished; } + spin_lock_init(&dev->lock); + /* udc csr registers base */ + dev->csr = dev->virt_addr + UDC_CSR_ADDR; + /* dev registers base */ + dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR; + /* ep registers base */ + dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR; + /* fifo's base */ + dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR); + dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR); + if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) { dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq); kfree(dev); @@ -3331,7 +3353,6 @@ static int udc_probe(struct udc *dev) udc_pollstall_timer.data = 0; /* device struct setup */ - spin_lock_init(&dev->lock); dev->gadget.ops = &udc_ops; dev_set_name(&dev->gadget.dev, "gadget"); @@ -3340,16 +3361,6 @@ static int udc_probe(struct udc *dev) dev->gadget.name = name; dev->gadget.is_dualspeed = 1; - /* udc csr registers base */ - dev->csr = dev->virt_addr + UDC_CSR_ADDR; - /* dev registers base */ - dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR; - /* ep registers base */ - dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR; - /* fifo's base */ - dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR); - dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR); - /* init registers, interrupts, ... */ startup_registers(dev); diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index f37de283d0ab..167cb2a8ecef 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -61,11 +61,6 @@ * simpler, Microsoft pushes their own approach: RNDIS. The published * RNDIS specs are ambiguous and appear to be incomplete, and are also * needlessly complex. They borrow more from CDC ACM than CDC ECM. - * - * While CDC ECM, CDC Subset, and RNDIS are designed to extend the ethernet - * interface to the target, CDC EEM was designed to use ethernet over the USB - * link between the host and target. CDC EEM is implemented as an alternative - * to those other protocols when that communication model is more appropriate */ #define DRIVER_DESC "Ethernet Gadget" @@ -157,8 +152,8 @@ static inline bool has_rndis(void) #define RNDIS_PRODUCT_NUM 0xa4a2 /* Ethernet/RNDIS Gadget */ /* For EEM gadgets */ -#define EEM_VENDOR_NUM 0x0525 /* INVALID - NEEDS TO BE ALLOCATED */ -#define EEM_PRODUCT_NUM 0xa4a1 /* INVALID - NEEDS TO BE ALLOCATED */ +#define EEM_VENDOR_NUM 0x1d6b /* Linux Foundation */ +#define EEM_PRODUCT_NUM 0x0102 /* EEM Gadget */ /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index eb6ddfc20857..6cb29d3df575 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -22,7 +22,6 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include "g_zero.h" diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c index 46d6266f30ec..b4a3ba654ea5 100644 --- a/drivers/usb/gadget/f_obex.c +++ b/drivers/usb/gadget/f_obex.c @@ -24,7 +24,6 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include "u_serial.h" diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index bffe91d525f9..09cba273d2db 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -22,7 +22,6 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include "g_zero.h" diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 42a74b8a0bb8..fa3d142ba64d 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2139,7 +2139,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, static void fsl_udc_release(struct device *dev) { complete(udc_controller->done); - dma_free_coherent(dev, udc_controller->ep_qh_size, + dma_free_coherent(dev->parent, udc_controller->ep_qh_size, udc_controller->ep_qh, udc_controller->ep_qh_dma); kfree(udc_controller); } diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index c52a681f376c..01ee0b9bc957 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1402,7 +1402,8 @@ static int __init imx_udc_probe(struct platform_device *pdev) struct clk *clk; void __iomem *base; int ret = 0; - int i, res_size; + int i; + resource_size_t res_size; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -1416,7 +1417,7 @@ static int __init imx_udc_probe(struct platform_device *pdev) return -ENODEV; } - res_size = res->end - res->start + 1; + res_size = resource_size(res); if (!request_mem_region(res->start, res_size, res->name)) { dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n", res_size, res->start); @@ -1527,8 +1528,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev) clk_disable(imx_usb->clk); iounmap(imx_usb->base); - release_mem_region(imx_usb->res->start, - imx_usb->res->end - imx_usb->res->start + 1); + release_mem_region(imx_usb->res->start, resource_size(imx_usb->res)); if (pdata->exit) pdata->exit(&pdev->dev); diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index c44367fea185..bf0f6520c6df 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -30,6 +30,7 @@ #include <linux/wait.h> #include <linux/compiler.h> #include <asm/uaccess.h> +#include <linux/sched.h> #include <linux/slab.h> #include <linux/poll.h> #include <linux/smp_lock.h> diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 29500154d00c..2d867fd22413 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -875,7 +875,7 @@ printer_ioctl(struct file *fd, unsigned int code, unsigned long arg) } /* used after endpoint configuration */ -static struct file_operations printer_io_operations = { +static const struct file_operations printer_io_operations = { .owner = THIS_MODULE, .open = printer_open, .read = printer_read, diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h index 03087e7b9190..9a537aa07968 100644 --- a/drivers/usb/gadget/r8a66597-udc.h +++ b/drivers/usb/gadget/r8a66597-udc.h @@ -131,31 +131,48 @@ static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset) } static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597, - unsigned long offset, u16 *buf, + unsigned long offset, + unsigned char *buf, int len) { + unsigned long fifoaddr = r8a66597->reg + offset; + unsigned int data; + int i; + if (r8a66597->pdata->on_chip) { - unsigned long fifoaddr = r8a66597->reg + offset; - unsigned long count; - union { - unsigned long dword; - unsigned char byte[4]; - } data; - unsigned char *pb; - int i; - - count = len / 4; - insl(fifoaddr, buf, count); - - if (len & 0x00000003) { - data.dword = inl(fifoaddr); - pb = (unsigned char *)buf + count * 4; - for (i = 0; i < (len & 0x00000003); i++) - pb[i] = data.byte[i]; + /* 32-bit accesses for on_chip controllers */ + + /* aligned buf case */ + if (len >= 4 && !((unsigned long)buf & 0x03)) { + insl(fifoaddr, buf, len / 4); + buf += len & ~0x03; + len &= 0x03; + } + + /* unaligned buf case */ + for (i = 0; i < len; i++) { + if (!(i & 0x03)) + data = inl(fifoaddr); + + buf[i] = (data >> ((i & 0x03) * 8)) & 0xff; } } else { - len = (len + 1) / 2; - insw(r8a66597->reg + offset, buf, len); + /* 16-bit accesses for external controllers */ + + /* aligned buf case */ + if (len >= 2 && !((unsigned long)buf & 0x01)) { + insw(fifoaddr, buf, len / 2); + buf += len & ~0x01; + len &= 0x01; + } + + /* unaligned buf case */ + for (i = 0; i < len; i++) { + if (!(i & 0x01)) + data = inw(fifoaddr); + + buf[i] = (data >> ((i & 0x01) * 8)) & 0xff; + } } } @@ -166,38 +183,40 @@ static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val, } static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597, - unsigned long offset, u16 *buf, + unsigned long offset, + unsigned char *buf, int len) { unsigned long fifoaddr = r8a66597->reg + offset; + int adj = 0; + int i; if (r8a66597->pdata->on_chip) { - unsigned long count; - unsigned char *pb; - int i; - - count = len / 4; - outsl(fifoaddr, buf, count); - - if (len & 0x00000003) { - pb = (unsigned char *)buf + count * 4; - for (i = 0; i < (len & 0x00000003); i++) { - if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND) - outb(pb[i], fifoaddr + i); - else - outb(pb[i], fifoaddr + 3 - i); - } + /* 32-bit access only if buf is 32-bit aligned */ + if (len >= 4 && !((unsigned long)buf & 0x03)) { + outsl(fifoaddr, buf, len / 4); + buf += len & ~0x03; + len &= 0x03; } } else { - int odd = len & 0x0001; - - len = len / 2; - outsw(fifoaddr, buf, len); - if (unlikely(odd)) { - buf = &buf[len]; - outb((unsigned char)*buf, fifoaddr); + /* 16-bit access only if buf is 16-bit aligned */ + if (len >= 2 && !((unsigned long)buf & 0x01)) { + outsw(fifoaddr, buf, len / 2); + buf += len & ~0x01; + len &= 0x01; } } + + /* adjust fifo address in the little endian case */ + if (!(r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)) { + if (r8a66597->pdata->on_chip) + adj = 0x03; /* 32-bit wide */ + else + adj = 0x01; /* 16-bit wide */ + } + + for (i = 0; i < len; i++) + outb(buf[i], fifoaddr + adj - (i & adj)); } static inline void r8a66597_mdfy(struct r8a66597 *r8a66597, diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c index b5200d551458..8252595d619d 100644 --- a/drivers/usb/gadget/u_audio.c +++ b/drivers/usb/gadget/u_audio.c @@ -10,7 +10,6 @@ */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include <linux/delay.h> #include <linux/ctype.h> diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index f8751ff863cd..2fc02bd95848 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -23,7 +23,6 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include <linux/ctype.h> #include <linux/etherdevice.h> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 9835e0713943..f5f5601701c9 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -28,6 +28,7 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> +#include <linux/ktime.h> #include <linux/list.h> #include <linux/interrupt.h> #include <linux/usb.h> @@ -676,6 +677,7 @@ static int ehci_run (struct usb_hcd *hcd) ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ msleep(5); up_write(&ehci_cf_port_reset_rwsem); + ehci->last_periodic_enable = ktime_get_real(); temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase)); ehci_info (ehci, diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 378861b9d79a..ead5f4f2aa5a 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -111,6 +111,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd) switch (pdev->vendor) { case PCI_VENDOR_ID_INTEL: ehci->need_io_watchdog = 0; + if (pdev->device == 0x27cc) { + ehci->broken_periodic = 1; + ehci_info(ehci, "using broken periodic workaround\n"); + } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 00ad9ce392ed..139a2cc3f641 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -487,8 +487,20 @@ halt: * we must clear the TT buffer (11.17.5). */ if (unlikely(last_status != -EINPROGRESS && - last_status != -EREMOTEIO)) - ehci_clear_tt_buffer(ehci, qh, urb, token); + last_status != -EREMOTEIO)) { + /* The TT's in some hubs malfunction when they + * receive this request following a STALL (they + * stop sending isochronous packets). Since a + * STALL can't leave the TT buffer in a busy + * state (if you believe Figures 11-48 - 11-51 + * in the USB 2.0 spec), we won't clear the TT + * buffer in this case. Strictly speaking this + * is a violation of the spec. + */ + if (last_status != -EPIPE) + ehci_clear_tt_buffer(ehci, qh, urb, + token); + } } /* if we're removing something not at the queue head, diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 3ea05936851f..a5535b5e3fe2 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -475,6 +475,8 @@ static int enable_periodic (struct ehci_hcd *ehci) /* make sure ehci_work scans these */ ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index) % (ehci->periodic_size << 3); + if (unlikely(ehci->broken_periodic)) + ehci->last_periodic_enable = ktime_get_real(); return 0; } @@ -486,6 +488,16 @@ static int disable_periodic (struct ehci_hcd *ehci) if (--ehci->periodic_sched) return 0; + if (unlikely(ehci->broken_periodic)) { + /* delay experimentally determined */ + ktime_t safe = ktime_add_us(ehci->last_periodic_enable, 1000); + ktime_t now = ktime_get_real(); + s64 delay = ktime_us_delta(safe, now); + + if (unlikely(delay > 0)) + udelay(delay); + } + /* did setting PSE not take effect yet? * takes effect only at frame boundaries... */ @@ -1400,6 +1412,10 @@ iso_stream_schedule ( goto fail; } + period = urb->interval; + if (!stream->highspeed) + period <<= 3; + now = ehci_readl(ehci, &ehci->regs->frame_index) % mod; /* when's the last uframe this urb could start? */ @@ -1417,14 +1433,15 @@ iso_stream_schedule ( /* Fell behind (by up to twice the slop amount)? */ if (start >= max - 2 * 8 * SCHEDULE_SLOP) - start += stream->interval * DIV_ROUND_UP( - max - start, stream->interval) - mod; + start += period * DIV_ROUND_UP( + max - start, period) - mod; /* Tried to schedule too far into the future? */ if (unlikely((start + sched->span) >= max)) { status = -EFBIG; goto fail; } + stream->next_uframe = start; goto ready; } @@ -1440,10 +1457,6 @@ iso_stream_schedule ( /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */ - period = urb->interval; - if (!stream->highspeed) - period <<= 3; - /* find a uframe slot with enough bandwidth */ for (; start < (stream->next_uframe + period); start++) { int enough_space; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 064e76821ff5..2d85e21ff282 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -118,6 +118,7 @@ struct ehci_hcd { /* one per controller */ unsigned stamp; unsigned random_frame; unsigned long next_statechange; + ktime_t last_periodic_enable; u32 command; /* SILICON QUIRKS */ @@ -127,6 +128,7 @@ struct ehci_hcd { /* one per controller */ unsigned big_endian_desc:1; unsigned has_amcc_usb23:1; unsigned need_io_watchdog:1; + unsigned broken_periodic:1; /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index e35d82808bab..5c774ab98252 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2284,10 +2284,10 @@ static int isp1362_mem_config(struct usb_hcd *hcd) dev_info(hcd->self.controller, "ISP1362 Memory usage:\n"); dev_info(hcd->self.controller, " ISTL: 2 * %4d: %4d @ $%04x:$%04x\n", istl_size / 2, istl_size, 0, istl_size / 2); - dev_info(hcd->self.controller, " INTL: %4d * (%3u+8): %4d @ $%04x\n", + dev_info(hcd->self.controller, " INTL: %4d * (%3lu+8): %4d @ $%04x\n", ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE, intl_size, istl_size); - dev_info(hcd->self.controller, " ATL : %4d * (%3u+8): %4d @ $%04x\n", + dev_info(hcd->self.controller, " ATL : %4d * (%3lu+8): %4d @ $%04x\n", atl_buffers, atl_blksize - PTD_HEADER_SIZE, atl_size, istl_size + intl_size); dev_info(hcd->self.controller, " USED/FREE: %4d %4d\n", total, @@ -2677,12 +2677,12 @@ static int __devexit isp1362_remove(struct platform_device *pdev) DBG(0, "%s: Removing HCD\n", __func__); usb_remove_hcd(hcd); - DBG(0, "%s: Unmapping data_reg @ %08x\n", __func__, - (u32)isp1362_hcd->data_reg); + DBG(0, "%s: Unmapping data_reg @ %p\n", __func__, + isp1362_hcd->data_reg); iounmap(isp1362_hcd->data_reg); - DBG(0, "%s: Unmapping addr_reg @ %08x\n", __func__, - (u32)isp1362_hcd->addr_reg); + DBG(0, "%s: Unmapping addr_reg @ %p\n", __func__, + isp1362_hcd->addr_reg); iounmap(isp1362_hcd->addr_reg); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); @@ -2810,16 +2810,16 @@ static int __init isp1362_probe(struct platform_device *pdev) return 0; err6: - DBG(0, "%s: Freeing dev %08x\n", __func__, (u32)isp1362_hcd); + DBG(0, "%s: Freeing dev %p\n", __func__, isp1362_hcd); usb_put_hcd(hcd); err5: - DBG(0, "%s: Unmapping data_reg @ %08x\n", __func__, (u32)data_reg); + DBG(0, "%s: Unmapping data_reg @ %p\n", __func__, data_reg); iounmap(data_reg); err4: DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)data->start); release_mem_region(data->start, resource_len(data)); err3: - DBG(0, "%s: Unmapping addr_reg @ %08x\n", __func__, (u32)addr_reg); + DBG(0, "%s: Unmapping addr_reg @ %p\n", __func__, addr_reg); iounmap(addr_reg); err2: DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)addr->start); diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h index fe60f62a32f3..1a253ebf7e50 100644 --- a/drivers/usb/host/isp1362.h +++ b/drivers/usb/host/isp1362.h @@ -580,7 +580,7 @@ static inline const char *ISP1362_INT_NAME(int n) static inline void ALIGNSTAT(struct isp1362_hcd *isp1362_hcd, void *ptr) { - unsigned p = (unsigned)ptr; + unsigned long p = (unsigned long)ptr; if (!(p & 0xf)) isp1362_hcd->stat16++; else if (!(p & 0x7)) @@ -770,7 +770,7 @@ static void isp1362_write_fifo(struct isp1362_hcd *isp1362_hcd, void *buf, u16 l if (!len) return; - if ((unsigned)dp & 0x1) { + if ((unsigned long)dp & 0x1) { /* not aligned */ for (; len > 1; len -= 2) { data = *dp++; @@ -962,8 +962,8 @@ static void isp1362_read_buffer(struct isp1362_hcd *isp1362_hcd, void *buf, u16 isp1362_write_diraddr(isp1362_hcd, offset, len); - DBG(3, "%s: Reading %d byte from buffer @%04x to memory @ %08x\n", __func__, - len, offset, (u32)buf); + DBG(3, "%s: Reading %d byte from buffer @%04x to memory @ %p\n", + __func__, len, offset, buf); isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT); _WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT)); @@ -982,8 +982,8 @@ static void isp1362_write_buffer(struct isp1362_hcd *isp1362_hcd, void *buf, u16 isp1362_write_diraddr(isp1362_hcd, offset, len); - DBG(3, "%s: Writing %d byte to buffer @%04x from memory @ %08x\n", __func__, - len, offset, (u32)buf); + DBG(3, "%s: Writing %d byte to buffer @%04x from memory @ %p\n", + __func__, len, offset, buf); isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT); _WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT)); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 78bb7710f36d..24eb74781919 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -87,6 +87,7 @@ static int ohci_restart (struct ohci_hcd *ohci); #ifdef CONFIG_PCI static void quirk_amd_pll(int state); static void amd_iso_dev_put(void); +static void sb800_prefetch(struct ohci_hcd *ohci, int on); #else static inline void quirk_amd_pll(int state) { @@ -96,6 +97,10 @@ static inline void amd_iso_dev_put(void) { return; } +static inline void sb800_prefetch(struct ohci_hcd *ohci, int on) +{ + return; +} #endif diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index d2ba04dd785e..b8a1148f248e 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -177,6 +177,13 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) return 0; pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); + + /* SB800 needs pre-fetch fix */ + if ((rev >= 0x40) && (rev <= 0x4f)) { + ohci->flags |= OHCI_QUIRK_AMD_PREFETCH; + ohci_dbg(ohci, "enabled AMD prefetch quirk\n"); + } + if ((rev > 0x3b) || (rev < 0x30)) { pci_dev_put(amd_smbus_dev); amd_smbus_dev = NULL; @@ -262,6 +269,19 @@ static void amd_iso_dev_put(void) } +static void sb800_prefetch(struct ohci_hcd *ohci, int on) +{ + struct pci_dev *pdev; + u16 misc; + + pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller); + pci_read_config_word(pdev, 0x50, &misc); + if (on == 0) + pci_write_config_word(pdev, 0x50, misc & 0xfcff); + else + pci_write_config_word(pdev, 0x50, misc | 0x0300); +} + /* List of quirks for OHCI */ static const struct pci_device_id ohci_pci_quirks[] = { { diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index b5294a9344de..f1c06202fdf2 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -481,38 +481,47 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state) +#ifdef CONFIG_PM +static int ohci_hcd_pxa27x_drv_suspend(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); if (time_before(jiffies, ohci->ohci.next_statechange)) msleep(5); ohci->ohci.next_statechange = jiffies; - pxa27x_stop_hc(ohci, &pdev->dev); + pxa27x_stop_hc(ohci, dev); hcd->state = HC_STATE_SUSPENDED; return 0; } -static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) +static int ohci_hcd_pxa27x_drv_resume(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); + struct pxaohci_platform_data *inf = dev->platform_data; int status; if (time_before(jiffies, ohci->ohci.next_statechange)) msleep(5); ohci->ohci.next_statechange = jiffies; - if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0) + if ((status = pxa27x_start_hc(ohci, dev)) < 0) return status; + /* Select Power Management Mode */ + pxa27x_ohci_select_pmm(ohci, inf->port_mode); + ohci_finish_controller_resume(hcd); return 0; } + +static struct dev_pm_ops ohci_hcd_pxa27x_pm_ops = { + .suspend = ohci_hcd_pxa27x_drv_suspend, + .resume = ohci_hcd_pxa27x_drv_resume, +}; #endif /* work with hotplug and coldplug */ @@ -522,13 +531,12 @@ static struct platform_driver ohci_hcd_pxa27x_driver = { .probe = ohci_hcd_pxa27x_drv_probe, .remove = ohci_hcd_pxa27x_drv_remove, .shutdown = usb_hcd_platform_shutdown, -#ifdef CONFIG_PM - .suspend = ohci_hcd_pxa27x_drv_suspend, - .resume = ohci_hcd_pxa27x_drv_resume, -#endif .driver = { .name = "pxa27x-ohci", .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &ohci_hcd_pxa27x_pm_ops, +#endif }, }; diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index 16fecb8ecc39..35288bcae0db 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -49,9 +49,12 @@ __acquires(ohci->lock) switch (usb_pipetype (urb->pipe)) { case PIPE_ISOCHRONOUS: ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--; - if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0 - && quirk_amdiso(ohci)) - quirk_amd_pll(1); + if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) { + if (quirk_amdiso(ohci)) + quirk_amd_pll(1); + if (quirk_amdprefetch(ohci)) + sb800_prefetch(ohci, 0); + } break; case PIPE_INTERRUPT: ohci_to_hcd(ohci)->self.bandwidth_int_reqs--; @@ -680,9 +683,12 @@ static void td_submit_urb ( data + urb->iso_frame_desc [cnt].offset, urb->iso_frame_desc [cnt].length, urb, cnt); } - if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0 - && quirk_amdiso(ohci)) - quirk_amd_pll(0); + if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) { + if (quirk_amdiso(ohci)) + quirk_amd_pll(0); + if (quirk_amdprefetch(ohci)) + sb800_prefetch(ohci, 1); + } periodic = ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs++ == 0 && ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0; break; diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 222011f6172c..5bf15fed0d9f 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -402,6 +402,7 @@ struct ohci_hcd { #define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */ #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ #define OHCI_QUIRK_AMD_ISO 0x200 /* ISO transfers*/ +#define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ // there are also chip quirks/bugs in init logic struct work_struct nec_work; /* Worker for NEC quirk */ @@ -433,6 +434,10 @@ static inline int quirk_amdiso(struct ohci_hcd *ohci) { return ohci->flags & OHCI_QUIRK_AMD_ISO; } +static inline int quirk_amdprefetch(struct ohci_hcd *ohci) +{ + return ohci->flags & OHCI_QUIRK_AMD_PREFETCH; +} #else static inline int quirk_nec(struct ohci_hcd *ohci) { @@ -446,6 +451,10 @@ static inline int quirk_amdiso(struct ohci_hcd *ohci) { return 0; } +static inline int quirk_amdprefetch(struct ohci_hcd *ohci) +{ + return 0; +} #endif /* convert between an hcd pointer and the corresponding ohci_hcd */ diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 23cf3bde4762..83b5f9cea85a 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -475,4 +475,4 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI) quirk_usb_handoff_xhci(pdev); } -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 749b53742828..e33d36256350 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1003,19 +1003,20 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port, if (syssts == SE0) { r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port)); r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port)); - return; - } + } else { + if (syssts == FS_JSTS) + r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port)); + else if (syssts == LS_JSTS) + r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port)); - if (syssts == FS_JSTS) - r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port)); - else if (syssts == LS_JSTS) - r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port)); + r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port)); + r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port)); - r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port)); - r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port)); + if (r8a66597->bus_suspended) + usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); + } - if (r8a66597->bus_suspended) - usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); + usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597)); } /* this function must be called with interrupt disabled */ @@ -1024,6 +1025,8 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port) u16 speed = get_rh_usb_speed(r8a66597, port); struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; + rh->port &= ~((1 << USB_PORT_FEAT_HIGHSPEED) | + (1 << USB_PORT_FEAT_LOWSPEED)); if (speed == HSMODE) rh->port |= (1 << USB_PORT_FEAT_HIGHSPEED); else if (speed == LSMODE) diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 516848dd9b48..39d253e841f6 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -37,28 +37,8 @@ MODULE_LICENSE("GPL"); /* MACROS */ /*====================================================================*/ -#if defined(DEBUG) || defined(PCMCIA_DEBUG) - -static int pc_debug = 0; -module_param(pc_debug, int, 0644); - -#define DBG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG "sl811_cs: " args) - -#else -#define DBG(n, args...) do{}while(0) -#endif /* no debugging */ - #define INFO(args...) printk(KERN_INFO "sl811_cs: " args) -#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444) - -#define CS_CHECK(fn, ret) \ - do { \ - last_fn = (fn); \ - if ((last_ret = (ret)) != 0) \ - goto cs_failed; \ - } while (0) - /*====================================================================*/ /* VARIABLES */ /*====================================================================*/ @@ -76,7 +56,7 @@ static void sl811_cs_release(struct pcmcia_device * link); static void release_platform_dev(struct device * dev) { - DBG(0, "sl811_cs platform_dev release\n"); + dev_dbg(dev, "sl811_cs platform_dev release\n"); dev->parent = NULL; } @@ -140,7 +120,7 @@ static int sl811_hc_init(struct device *parent, resource_size_t base_addr, static void sl811_cs_detach(struct pcmcia_device *link) { - DBG(0, "sl811_cs_detach(0x%p)\n", link); + dev_dbg(&link->dev, "sl811_cs_detach\n"); sl811_cs_release(link); @@ -150,7 +130,7 @@ static void sl811_cs_detach(struct pcmcia_device *link) static void sl811_cs_release(struct pcmcia_device * link) { - DBG(0, "sl811_cs_release(0x%p)\n", link); + dev_dbg(&link->dev, "sl811_cs_release\n"); pcmcia_disable_device(link); platform_device_unregister(&platform_dev); @@ -205,11 +185,11 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, static int sl811_cs_config(struct pcmcia_device *link) { - struct device *parent = &handle_to_dev(link); + struct device *parent = &link->dev; local_info_t *dev = link->priv; - int last_fn, last_ret; + int ret; - DBG(0, "sl811_cs_config(0x%p)\n", link); + dev_dbg(&link->dev, "sl811_cs_config\n"); if (pcmcia_loop_config(link, sl811_cs_config_check, NULL)) goto failed; @@ -217,14 +197,16 @@ static int sl811_cs_config(struct pcmcia_device *link) /* require an IRQ and two registers */ if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) goto failed; - if (link->conf.Attributes & CONF_ENABLE_IRQ) - CS_CHECK(RequestIRQ, - pcmcia_request_irq(link, &link->irq)); - else + if (link->conf.Attributes & CONF_ENABLE_IRQ) { + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; + } else goto failed; - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; sprintf(dev->node.dev_name, driver_name); dev->node.major = dev->node.minor = 0; @@ -241,8 +223,6 @@ static int sl811_cs_config(struct pcmcia_device *link) if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ) < 0) { -cs_failed: - cs_error(link, last_fn, last_ret); failed: printk(KERN_WARNING "sl811_cs_config failed\n"); sl811_cs_release(link); @@ -263,7 +243,6 @@ static int sl811_cs_probe(struct pcmcia_device *link) /* Initialize */ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID; link->irq.Handler = NULL; link->conf.Attributes = 0; diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index c632437c7649..562eba108816 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -115,6 +115,10 @@ static uint32_t process_qset(struct whc *whc, struct whc_qset *qset) if (status & QTD_STS_HALTED) { /* Ug, an error. */ process_halted_qtd(whc, qset, td); + /* A halted qTD always triggers an update + because the qset was either removed or + reactivated. */ + update |= WHC_UPDATE_UPDATED; goto done; } @@ -305,6 +309,7 @@ int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status) struct whc_urb *wurb = urb->hcpriv; struct whc_qset *qset = wurb->qset; struct whc_std *std, *t; + bool has_qtd = false; int ret; unsigned long flags; @@ -315,17 +320,21 @@ int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status) goto out; list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb == urb) + if (std->urb == urb) { + if (std->qtd) + has_qtd = true; qset_free_std(whc, std); - else + } else std->qtd = NULL; /* so this std is re-added when the qset is */ } - asl_qset_remove(whc, qset); - wurb->status = status; - wurb->is_async = true; - queue_work(whc->workqueue, &wurb->dequeue_work); - + if (has_qtd) { + asl_qset_remove(whc, qset); + wurb->status = status; + wurb->is_async = true; + queue_work(whc->workqueue, &wurb->dequeue_work); + } else + qset_remove_urb(whc, qset, urb, status); out: spin_unlock_irqrestore(&whc->lock, flags); diff --git a/drivers/usb/host/whci/debug.c b/drivers/usb/host/whci/debug.c index cf2d45946c57..2273c815941f 100644 --- a/drivers/usb/host/whci/debug.c +++ b/drivers/usb/host/whci/debug.c @@ -134,7 +134,7 @@ static int pzl_open(struct inode *inode, struct file *file) return single_open(file, pzl_print, inode->i_private); } -static struct file_operations di_fops = { +static const struct file_operations di_fops = { .open = di_open, .read = seq_read, .llseek = seq_lseek, @@ -142,7 +142,7 @@ static struct file_operations di_fops = { .owner = THIS_MODULE, }; -static struct file_operations asl_fops = { +static const struct file_operations asl_fops = { .open = asl_open, .read = seq_read, .llseek = seq_lseek, @@ -150,7 +150,7 @@ static struct file_operations asl_fops = { .owner = THIS_MODULE, }; -static struct file_operations pzl_fops = { +static const struct file_operations pzl_fops = { .open = pzl_open, .read = seq_read, .llseek = seq_lseek, diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index a9e05bac6646..0db3fb2dc03a 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -121,6 +121,10 @@ static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset) if (status & QTD_STS_HALTED) { /* Ug, an error. */ process_halted_qtd(whc, qset, td); + /* A halted qTD always triggers an update + because the qset was either removed or + reactivated. */ + update |= WHC_UPDATE_UPDATED; goto done; } @@ -333,6 +337,7 @@ int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status) struct whc_urb *wurb = urb->hcpriv; struct whc_qset *qset = wurb->qset; struct whc_std *std, *t; + bool has_qtd = false; int ret; unsigned long flags; @@ -343,17 +348,22 @@ int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status) goto out; list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb == urb) + if (std->urb == urb) { + if (std->qtd) + has_qtd = true; qset_free_std(whc, std); - else + } else std->qtd = NULL; /* so this std is re-added when the qset is */ } - pzl_qset_remove(whc, qset); - wurb->status = status; - wurb->is_async = false; - queue_work(whc->workqueue, &wurb->dequeue_work); - + if (has_qtd) { + pzl_qset_remove(whc, qset); + update_pzl_hw_view(whc); + wurb->status = status; + wurb->is_async = false; + queue_work(whc->workqueue, &wurb->dequeue_work); + } else + qset_remove_urb(whc, qset, urb, status); out: spin_unlock_irqrestore(&whc->lock, flags); diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 99911e727e0b..932f99938481 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -335,6 +335,12 @@ void xhci_event_ring_work(unsigned long arg) spin_lock_irqsave(&xhci->lock, flags); temp = xhci_readl(xhci, &xhci->op_regs->status); xhci_dbg(xhci, "op reg status = 0x%x\n", temp); + if (temp == 0xffffffff) { + xhci_dbg(xhci, "HW died, polling stopped.\n"); + spin_unlock_irqrestore(&xhci->lock, flags); + return; + } + temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp); xhci_dbg(xhci, "No-op commands handled = %d\n", xhci->noops_handled); @@ -776,6 +782,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { unsigned long flags; int ret; + u32 temp; struct xhci_hcd *xhci; struct xhci_td *td; unsigned int ep_index; @@ -788,6 +795,17 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) ret = usb_hcd_check_unlink_urb(hcd, urb, status); if (ret || !urb->hcpriv) goto done; + temp = xhci_readl(xhci, &xhci->op_regs->status); + if (temp == 0xffffffff) { + xhci_dbg(xhci, "HW died, freeing TD.\n"); + td = (struct xhci_td *) urb->hcpriv; + + usb_hcd_unlink_urb_from_ep(hcd, urb); + spin_unlock_irqrestore(&xhci->lock, flags); + usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN); + kfree(td); + return ret; + } xhci_dbg(xhci, "Cancel URB %p\n", urb); xhci_dbg(xhci, "Event ring:\n"); @@ -877,7 +895,7 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, ctrl_ctx->drop_flags |= drop_flag; new_drop_flags = ctrl_ctx->drop_flags; - ctrl_ctx->add_flags = ~drop_flag; + ctrl_ctx->add_flags &= ~drop_flag; new_add_flags = ctrl_ctx->add_flags; last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags); @@ -1410,11 +1428,20 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); unsigned long flags; + u32 state; if (udev->slot_id == 0) return; spin_lock_irqsave(&xhci->lock, flags); + /* Don't disable the slot if the host controller is dead. */ + state = xhci_readl(xhci, &xhci->op_regs->status); + if (state == 0xffffffff) { + xhci_free_virt_device(xhci, udev->slot_id); + spin_unlock_irqrestore(&xhci->lock, flags); + return; + } + if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 1db4fea8c170..b8fd270a8b0d 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -802,9 +802,11 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) int i; /* Free the Event Ring Segment Table and the actual Event Ring */ - xhci_writel(xhci, 0, &xhci->ir_set->erst_size); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_base); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue); + if (xhci->ir_set) { + xhci_writel(xhci, 0, &xhci->ir_set->erst_size); + xhci_write_64(xhci, 0, &xhci->ir_set->erst_base); + xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue); + } size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); if (xhci->erst.entries) pci_free_consistent(pdev, size, @@ -841,9 +843,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->dcbaa, xhci->dcbaa->dma); xhci->dcbaa = NULL; + scratchpad_free(xhci); xhci->page_size = 0; xhci->page_shift = 0; - scratchpad_free(xhci); } int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 173c39c76489..821b7b4709de 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -864,9 +864,11 @@ static struct xhci_segment *trb_in_td( cur_seg = start_seg; do { + if (start_dma == 0) + return 0; /* We may get an event for a Link TRB in the middle of a TD */ end_seg_dma = xhci_trb_virt_to_dma(cur_seg, - &start_seg->trbs[TRBS_PER_SEGMENT - 1]); + &cur_seg->trbs[TRBS_PER_SEGMENT - 1]); /* If the end TRB isn't in this segment, this is set to 0 */ end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb); @@ -893,8 +895,9 @@ static struct xhci_segment *trb_in_td( } cur_seg = cur_seg->next; start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]); - } while (1); + } while (cur_seg != start_seg); + return 0; } /* diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index d645f3899fe1..32d0199d0c32 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -429,8 +429,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) return read_count; } -static struct -file_operations usb_rio_fops = { +static const struct file_operations usb_rio_fops = { .owner = THIS_MODULE, .read = read_rio, .write = write_rio, diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.c b/drivers/usb/misc/sisusbvga/sisusb_init.c index 273de5d0934e..0ab990744830 100644 --- a/drivers/usb/misc/sisusbvga/sisusb_init.c +++ b/drivers/usb/misc/sisusbvga/sisusb_init.c @@ -43,7 +43,6 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/spinlock.h> -#include <linux/kref.h> #include "sisusb.h" diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 29092b8e59ce..4fb120357c55 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -313,7 +313,8 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id if (le16_to_cpu(dev->udev->descriptor.idProduct) != 0x0001) { dev_warn(&interface->dev, "USBLCD model not supported.\n"); - return -ENODEV; + retval = -ENODEV; + goto error; } /* set up the endpoint information */ diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index dfdc43e2e00d..10f3205798e8 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -348,12 +348,12 @@ static unsigned int mon_buff_area_alloc_contiguous(struct mon_reader_bin *rp, /* * Return a few (kilo-)bytes to the head of the buffer. - * This is used if a DMA fetch fails. + * This is used if a data fetch fails. */ static void mon_buff_area_shrink(struct mon_reader_bin *rp, unsigned int size) { - size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + /* size &= ~(PKT_ALIGN-1); -- we're called with aligned size */ rp->b_cnt -= size; if (rp->b_in < size) rp->b_in += rp->b_size; @@ -433,6 +433,7 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, unsigned int urb_length; unsigned int offset; unsigned int length; + unsigned int delta; unsigned int ndesc, lendesc; unsigned char dir; struct mon_bin_hdr *ep; @@ -537,8 +538,10 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, if (length != 0) { ep->flag_data = mon_bin_get_data(rp, offset, urb, length); if (ep->flag_data != 0) { /* Yes, it's 0x00, not '0' */ - ep->len_cap = 0; - mon_buff_area_shrink(rp, length); + delta = (ep->len_cap + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + ep->len_cap -= length; + delta -= (ep->len_cap + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + mon_buff_area_shrink(rp, delta); } } else { ep->flag_data = data_tag; @@ -1174,7 +1177,7 @@ static int mon_bin_vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf) return 0; } -static struct vm_operations_struct mon_bin_vm_ops = { +static const struct vm_operations_struct mon_bin_vm_ops = { .open = mon_bin_vma_open, .close = mon_bin_vma_close, .fault = mon_bin_vma_fault, diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 803adcb5ac1d..b84abd8ee8a5 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -8,8 +8,8 @@ comment "Enable Host or Gadget support to see Inventra options" # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC - depends on (USB || USB_GADGET) && HAVE_CLK - depends on !SUPERH + depends on (USB || USB_GADGET) + depends on (ARM || BLACKFIN) select NOP_USB_XCEIV if ARCH_DAVINCI select TWL4030_USB if MACH_OMAP_3430SDP select NOP_USB_XCEIV if MACH_OMAP3EVM diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index f2f66ebc7362..fcec87ea709e 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -14,7 +14,6 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/list.h> -#include <linux/clk.h> #include <linux/gpio.h> #include <linux/io.h> diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index c3577bbbae6c..ef2332a9941d 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1442,11 +1442,6 @@ static int cppi_channel_abort(struct dma_channel *channel) musb_writew(regs, MUSB_TXCSR, value); musb_writew(regs, MUSB_TXCSR, value); - /* re-enable interrupt */ - if (enabled) - musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG, - (1 << cppi_ch->index)); - /* While we scrub the TX state RAM, ensure that we clean * up any interrupt that's currently asserted: * 1. Write to completion Ptr value 0x1(bit 0 set) @@ -1459,6 +1454,11 @@ static int cppi_channel_abort(struct dma_channel *channel) cppi_reset_tx(tx_ram, 1); musb_writel(&tx_ram->tx_complete, 0, 0); + /* re-enable interrupt */ + if (enabled) + musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG, + (1 << cppi_ch->index)); + cppi_dump_tx(5, cppi_ch, " (done teardown)"); /* REVISIT tx side _should_ clean up the same way diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 3a61ddb62bd2..547e0e390726 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1450,7 +1450,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) #endif if (hw_ep->max_packet_sz_tx) { - printk(KERN_DEBUG + DBG(1, "%s: hw_ep %d%s, %smax %d\n", musb_driver_name, i, hw_ep->is_shared_fifo ? "shared" : "tx", @@ -1459,7 +1459,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) hw_ep->max_packet_sz_tx); } if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) { - printk(KERN_DEBUG + DBG(1, "%s: hw_ep %d%s, %smax %d\n", musb_driver_name, i, "rx", diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 381d648a36b8..6aa5f22e5274 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -95,6 +95,13 @@ struct musb_ep; #endif #endif /* need MUSB gadget selection */ +#ifndef CONFIG_HAVE_CLK +/* Dummy stub for clk framework */ +#define clk_get(dev, id) NULL +#define clk_put(clock) do {} while (0) +#define clk_enable(clock) do {} while (0) +#define clk_disable(clock) do {} while (0) +#endif #ifdef CONFIG_PROC_FS #include <linux/fs.h> diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 8b3c4e2ed7b8..74073f9a43f0 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -4,6 +4,7 @@ * Copyright 2005 Mentor Graphics Corporation * Copyright (C) 2005-2006 by Texas Instruments * Copyright (C) 2006-2007 Nokia Corporation + * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -436,14 +437,6 @@ void musb_g_tx(struct musb *musb, u8 epnum) csr |= MUSB_TXCSR_P_WZC_BITS; csr &= ~MUSB_TXCSR_P_SENTSTALL; musb_writew(epio, MUSB_TXCSR, csr); - if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { - dma->status = MUSB_DMA_STATUS_CORE_ABORT; - musb->dma_controller->channel_abort(dma); - } - - if (request) - musb_g_giveback(musb_ep, request, -EPIPE); - break; } @@ -582,15 +575,25 @@ void musb_g_tx(struct musb *musb, u8 epnum) */ static void rxstate(struct musb *musb, struct musb_request *req) { - u16 csr = 0; const u8 epnum = req->epnum; struct usb_request *request = &req->request; struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out; void __iomem *epio = musb->endpoints[epnum].regs; unsigned fifo_count = 0; u16 len = musb_ep->packet_sz; + u16 csr = musb_readw(epio, MUSB_RXCSR); - csr = musb_readw(epio, MUSB_RXCSR); + /* We shouldn't get here while DMA is active, but we do... */ + if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) { + DBG(4, "DMA pending...\n"); + return; + } + + if (csr & MUSB_RXCSR_P_SENDSTALL) { + DBG(5, "%s stalling, RXCSR %04x\n", + musb_ep->end_point.name, csr); + return; + } if (is_cppi_enabled() && musb_ep->dma) { struct dma_controller *c = musb->dma_controller; @@ -761,19 +764,10 @@ void musb_g_rx(struct musb *musb, u8 epnum) csr, dma ? " (dma)" : "", request); if (csr & MUSB_RXCSR_P_SENTSTALL) { - if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { - dma->status = MUSB_DMA_STATUS_CORE_ABORT; - (void) musb->dma_controller->channel_abort(dma); - request->actual += musb_ep->dma->actual_len; - } - csr |= MUSB_RXCSR_P_WZC_BITS; csr &= ~MUSB_RXCSR_P_SENTSTALL; musb_writew(epio, MUSB_RXCSR, csr); - - if (request) - musb_g_giveback(musb_ep, request, -EPIPE); - goto done; + return; } if (csr & MUSB_RXCSR_P_OVERRUN) { @@ -795,7 +789,7 @@ void musb_g_rx(struct musb *musb, u8 epnum) DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1, "%s busy, csr %04x\n", musb_ep->end_point.name, csr); - goto done; + return; } if (dma && (csr & MUSB_RXCSR_DMAENAB)) { @@ -826,22 +820,15 @@ void musb_g_rx(struct musb *musb, u8 epnum) if ((request->actual < request->length) && (musb_ep->dma->actual_len == musb_ep->packet_sz)) - goto done; + return; #endif musb_g_giveback(musb_ep, request, 0); request = next_request(musb_ep); if (!request) - goto done; - - /* don't start more i/o till the stall clears */ - musb_ep_select(mbase, epnum); - csr = musb_readw(epio, MUSB_RXCSR); - if (csr & MUSB_RXCSR_P_SENDSTALL) - goto done; + return; } - /* analyze request if the ep is hot */ if (request) rxstate(musb, to_musb_request(request)); @@ -849,8 +836,6 @@ void musb_g_rx(struct musb *musb, u8 epnum) DBG(3, "packet waiting for %s%s request\n", musb_ep->desc ? "" : "inactive ", musb_ep->end_point.name); - -done: return; } @@ -1244,7 +1229,7 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value) void __iomem *mbase; unsigned long flags; u16 csr; - struct musb_request *request = NULL; + struct musb_request *request; int status = 0; if (!ep) @@ -1260,24 +1245,29 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value) musb_ep_select(mbase, epnum); - /* cannot portably stall with non-empty FIFO */ request = to_musb_request(next_request(musb_ep)); - if (value && musb_ep->is_in) { - csr = musb_readw(epio, MUSB_TXCSR); - if (csr & MUSB_TXCSR_FIFONOTEMPTY) { - DBG(3, "%s fifo busy, cannot halt\n", ep->name); - spin_unlock_irqrestore(&musb->lock, flags); - return -EAGAIN; + if (value) { + if (request) { + DBG(3, "request in progress, cannot halt %s\n", + ep->name); + status = -EAGAIN; + goto done; + } + /* Cannot portably stall with non-empty FIFO */ + if (musb_ep->is_in) { + csr = musb_readw(epio, MUSB_TXCSR); + if (csr & MUSB_TXCSR_FIFONOTEMPTY) { + DBG(3, "FIFO busy, cannot halt %s\n", ep->name); + status = -EAGAIN; + goto done; + } } - } /* set/clear the stall and toggle bits */ DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear"); if (musb_ep->is_in) { csr = musb_readw(epio, MUSB_TXCSR); - if (csr & MUSB_TXCSR_FIFONOTEMPTY) - csr |= MUSB_TXCSR_FLUSHFIFO; csr |= MUSB_TXCSR_P_WZC_BITS | MUSB_TXCSR_CLRDATATOG; if (value) @@ -1300,14 +1290,13 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value) musb_writew(epio, MUSB_RXCSR, csr); } -done: - /* maybe start the first request in the queue */ if (!musb_ep->busy && !value && request) { DBG(3, "restarting the request\n"); musb_ep_restart(musb, request); } +done: spin_unlock_irqrestore(&musb->lock, flags); return status; } diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 7a6778675ad3..522efb31b56b 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -511,7 +511,8 @@ static void ep0_txstate(struct musb *musb) /* update the flags */ if (fifo_count < MUSB_MAX_END0_PACKET - || request->actual == request->length) { + || (request->actual == request->length + && !request->zero)) { musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT; csr |= MUSB_CSR0_P_DATAEND; } else diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index cf94511485f2..e3ab40a966eb 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1301,8 +1301,11 @@ void musb_host_tx(struct musb *musb, u8 epnum) return; } else if (usb_pipeisoc(pipe) && dma) { if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb, - offset, length)) + offset, length)) { + if (is_cppi_enabled() || tusb_dma_omap()) + musb_h_tx_dma_start(hw_ep); return; + } } else if (tx_csr & MUSB_TXCSR_DMAENAB) { DBG(1, "not complete, but DMA enabled?\n"); return; diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index fbfd3fd9ce1f..cc1d71b57d3c 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -439,15 +439,6 @@ static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, /* Not implemented - HW has seperate Tx/Rx FIFO */ #define MUSB_TXCSR_MODE 0x0000 -/* - * Dummy stub for clk framework, it will be removed - * until Blackfin supports clk framework - */ -#define clk_get(dev, id) NULL -#define clk_put(clock) do {} while (0) -#define clk_enable(clock) do {} while (0) -#define clk_disable(clock) do {} while (0) - static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size) { } diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 2cbfab3716e5..b10ac8409411 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -554,13 +554,12 @@ static void aircable_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct aircable_private *priv = usb_get_serial_port_data(port); - unsigned long flags; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->rx_lock, flags); + spin_lock_irq(&priv->rx_lock); priv->rx_flags |= THROTTLED; - spin_unlock_irqrestore(&priv->rx_lock, flags); + spin_unlock_irq(&priv->rx_lock); } /* Based on ftdi_sio.c unthrottle */ @@ -569,14 +568,13 @@ static void aircable_unthrottle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct aircable_private *priv = usb_get_serial_port_data(port); int actually_throttled; - unsigned long flags; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->rx_lock, flags); + spin_lock_irq(&priv->rx_lock); actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED); - spin_unlock_irqrestore(&priv->rx_lock, flags); + spin_unlock_irq(&priv->rx_lock); if (actually_throttled) schedule_work(&priv->rx_work); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 4a208fe85bc9..bd254ec97d14 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -50,6 +50,8 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *, static void cp210x_break_ctl(struct tty_struct *, int); static int cp210x_startup(struct usb_serial *); static void cp210x_disconnect(struct usb_serial *); +static void cp210x_dtr_rts(struct usb_serial_port *p, int on); +static int cp210x_carrier_raised(struct usb_serial_port *p); static int debug; @@ -113,6 +115,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ + { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ { } /* Terminating Entry */ }; @@ -142,6 +145,8 @@ static struct usb_serial_driver cp210x_device = { .tiocmset = cp210x_tiocmset, .attach = cp210x_startup, .disconnect = cp210x_disconnect, + .dtr_rts = cp210x_dtr_rts, + .carrier_raised = cp210x_carrier_raised }; /* Config request types */ @@ -745,6 +750,14 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file, return cp210x_set_config(port, CP210X_SET_MHS, &control, 2); } +static void cp210x_dtr_rts(struct usb_serial_port *p, int on) +{ + if (on) + cp210x_tiocmset_port(p, NULL, TIOCM_DTR|TIOCM_RTS, 0); + else + cp210x_tiocmset_port(p, NULL, 0, TIOCM_DTR|TIOCM_RTS); +} + static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; @@ -767,6 +780,15 @@ static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) return result; } +static int cp210x_carrier_raised(struct usb_serial_port *p) +{ + unsigned int control; + cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1); + if (control & CONTROL_DCD) + return 1; + return 0; +} + static void cp210x_break_ctl (struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index e0a8b715f2f2..a591ebec0f89 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -1155,13 +1155,12 @@ static void cypress_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); - unsigned long flags; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irq(&priv->lock); priv->rx_flags = THROTTLED; - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irq(&priv->lock); } @@ -1170,14 +1169,13 @@ static void cypress_unthrottle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); int actually_throttled, result; - unsigned long flags; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irq(&priv->lock); actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; priv->rx_flags = 0; - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irq(&priv->lock); if (!priv->comm_is_ok) return; @@ -1185,7 +1183,7 @@ static void cypress_unthrottle(struct tty_struct *tty) if (actually_throttled) { port->interrupt_in_urb->dev = port->serial->dev; - result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting read urb, " "error %d\n", __func__, result); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index ab3dd991586b..68e80be6b9e1 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -898,16 +898,16 @@ static void digi_rx_unthrottle(struct tty_struct *tty) spin_lock_irqsave(&priv->dp_port_lock, flags); - /* turn throttle off */ - priv->dp_throttled = 0; - priv->dp_throttle_restart = 0; - /* restart read chain */ if (priv->dp_throttle_restart) { port->read_urb->dev = port->serial->dev; ret = usb_submit_urb(port->read_urb, GFP_ATOMIC); } + /* turn throttle off */ + priv->dp_throttled = 0; + priv->dp_throttle_restart = 0; + spin_unlock_irqrestore(&priv->dp_port_lock, flags); if (ret) diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 33c9e9cf9eb2..7dd0e3eadbe6 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -391,7 +391,7 @@ static void empeg_unthrottle(struct tty_struct *tty) dbg("%s - port %d", __func__, port->number); port->read_urb->dev = port->serial->dev; - result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 4f883b1773d0..ebcc6d0e2e91 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -76,13 +76,7 @@ struct ftdi_private { unsigned long last_dtr_rts; /* saved modem control outputs */ wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ char prev_status, diff_status; /* Used for TIOCMIWAIT */ - __u8 rx_flags; /* receive state flags (throttling) */ - spinlock_t rx_lock; /* spinlock for receive state */ - struct delayed_work rx_work; struct usb_serial_port *port; - int rx_processed; - unsigned long rx_bytes; - __u16 interface; /* FT2232C, FT2232H or FT4232H port interface (0 for FT232/245) */ @@ -737,10 +731,6 @@ static const char *ftdi_chip_name[] = { /* Constants for read urb and write urb */ #define BUFSZ 512 -/* rx_flags */ -#define THROTTLED 0x01 -#define ACTUALLY_THROTTLED 0x02 - /* Used for TIOCMIWAIT */ #define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD) #define FTDI_STATUS_B1_MASK (FTDI_RS_BI) @@ -763,7 +753,7 @@ static int ftdi_write_room(struct tty_struct *tty); static int ftdi_chars_in_buffer(struct tty_struct *tty); static void ftdi_write_bulk_callback(struct urb *urb); static void ftdi_read_bulk_callback(struct urb *urb); -static void ftdi_process_read(struct work_struct *work); +static void ftdi_process_read(struct usb_serial_port *port); static void ftdi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static int ftdi_tiocmget(struct tty_struct *tty, struct file *file); @@ -1234,7 +1224,6 @@ static int set_serial_info(struct tty_struct *tty, (new_serial.flags & ASYNC_FLAGS)); priv->custom_divisor = new_serial.custom_divisor; - tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; write_latency_timer(port); check_and_exit: @@ -1527,7 +1516,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) } kref_init(&priv->kref); - spin_lock_init(&priv->rx_lock); spin_lock_init(&priv->tx_lock); init_waitqueue_head(&priv->delta_msr_wait); /* This will push the characters through immediately rather @@ -1549,7 +1537,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) port->read_urb->transfer_buffer_length = BUFSZ; } - INIT_DELAYED_WORK(&priv->rx_work, ftdi_process_read); priv->port = port; /* Free port's existing write urb and transfer buffer. */ @@ -1686,6 +1673,26 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) return 0; } +static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags) +{ + struct urb *urb = port->read_urb; + struct usb_serial *serial = port->serial; + int result; + + usb_fill_bulk_urb(urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), + urb->transfer_buffer, + urb->transfer_buffer_length, + ftdi_read_bulk_callback, port); + result = usb_submit_urb(urb, mem_flags); + if (result) + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); + return result; +} + static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) { /* ftdi_open */ struct usb_device *dev = port->serial->dev; @@ -1700,12 +1707,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) spin_lock_irqsave(&priv->tx_lock, flags); priv->tx_bytes = 0; spin_unlock_irqrestore(&priv->tx_lock, flags); - spin_lock_irqsave(&priv->rx_lock, flags); - priv->rx_bytes = 0; - spin_unlock_irqrestore(&priv->rx_lock, flags); - - if (tty) - tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; write_latency_timer(port); @@ -1725,23 +1726,14 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) ftdi_set_termios(tty, port, tty->termios); /* Not throttled */ - spin_lock_irqsave(&priv->rx_lock, flags); - priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED); - spin_unlock_irqrestore(&priv->rx_lock, flags); + spin_lock_irqsave(&port->lock, flags); + port->throttled = 0; + port->throttle_req = 0; + spin_unlock_irqrestore(&port->lock, flags); /* Start reading from the device */ - priv->rx_processed = 0; - usb_fill_bulk_urb(port->read_urb, dev, - usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - ftdi_read_bulk_callback, port); - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __func__, result); - else + result = ftdi_submit_read_urb(port, GFP_KERNEL); + if (!result) kref_get(&priv->kref); return result; @@ -1787,10 +1779,6 @@ static void ftdi_close(struct usb_serial_port *port) dbg("%s", __func__); - - /* cancel any scheduled reading */ - cancel_delayed_work_sync(&priv->rx_work); - /* shutdown our bulk read */ usb_kill_urb(port->read_urb); kref_put(&priv->kref, ftdi_sio_priv_release); @@ -1949,7 +1937,7 @@ static void ftdi_write_bulk_callback(struct urb *urb) return; } /* account for transferred data */ - countback = urb->actual_length; + countback = urb->transfer_buffer_length; data_offset = priv->write_offset; if (data_offset > 0) { /* Subtract the control bytes */ @@ -1962,7 +1950,6 @@ static void ftdi_write_bulk_callback(struct urb *urb) if (status) { dbg("nonzero write bulk status received: %d", status); - return; } usb_serial_port_softint(port); @@ -2013,271 +2000,121 @@ static int ftdi_chars_in_buffer(struct tty_struct *tty) return buffered; } -static void ftdi_read_bulk_callback(struct urb *urb) +static int ftdi_process_packet(struct tty_struct *tty, + struct usb_serial_port *port, struct ftdi_private *priv, + char *packet, int len) { - struct usb_serial_port *port = urb->context; - struct tty_struct *tty; - struct ftdi_private *priv; - unsigned long countread; - unsigned long flags; - int status = urb->status; - - if (urb->number_of_packets > 0) { - dev_err(&port->dev, "%s transfer_buffer_length %d " - "actual_length %d number of packets %d\n", __func__, - urb->transfer_buffer_length, - urb->actual_length, urb->number_of_packets); - dev_err(&port->dev, "%s transfer_flags %x\n", __func__, - urb->transfer_flags); - } + int i; + char status; + char flag; + char *ch; dbg("%s - port %d", __func__, port->number); - if (port->port.count <= 0) - return; - - tty = tty_port_tty_get(&port->port); - if (!tty) { - dbg("%s - bad tty pointer - exiting", __func__); - return; + if (len < 2) { + dbg("malformed packet"); + return 0; } - priv = usb_get_serial_port_data(port); - if (!priv) { - dbg("%s - bad port private data pointer - exiting", __func__); - goto out; + /* Compare new line status to the old one, signal if different/ + N.B. packet may be processed more than once, but differences + are only processed once. */ + status = packet[0] & FTDI_STATUS_B0_MASK; + if (status != priv->prev_status) { + priv->diff_status |= status ^ priv->prev_status; + wake_up_interruptible(&priv->delta_msr_wait); + priv->prev_status = status; } - if (urb != port->read_urb) - dev_err(&port->dev, "%s - Not my urb!\n", __func__); - - if (status) { - /* This will happen at close every time so it is a dbg not an - err */ - dbg("(this is ok on close) nonzero read bulk status received: %d", status); - goto out; + /* + * Although the device uses a bitmask and hence can have multiple + * errors on a packet - the order here sets the priority the error is + * returned to the tty layer. + */ + flag = TTY_NORMAL; + if (packet[1] & FTDI_RS_OE) { + flag = TTY_OVERRUN; + dbg("OVERRRUN error"); + } + if (packet[1] & FTDI_RS_BI) { + flag = TTY_BREAK; + dbg("BREAK received"); + usb_serial_handle_break(port); + } + if (packet[1] & FTDI_RS_PE) { + flag = TTY_PARITY; + dbg("PARITY error"); + } + if (packet[1] & FTDI_RS_FE) { + flag = TTY_FRAME; + dbg("FRAMING error"); } - /* count data bytes, but not status bytes */ - countread = urb->actual_length; - countread -= 2 * DIV_ROUND_UP(countread, priv->max_packet_size); - spin_lock_irqsave(&priv->rx_lock, flags); - priv->rx_bytes += countread; - spin_unlock_irqrestore(&priv->rx_lock, flags); - - ftdi_process_read(&priv->rx_work.work); -out: - tty_kref_put(tty); -} /* ftdi_read_bulk_callback */ - + len -= 2; + if (!len) + return 0; /* status only */ + ch = packet + 2; + + if (!(port->console && port->sysrq) && flag == TTY_NORMAL) + tty_insert_flip_string(tty, ch, len); + else { + for (i = 0; i < len; i++, ch++) { + if (!usb_serial_handle_sysrq_char(tty, port, *ch)) + tty_insert_flip_char(tty, *ch, flag); + } + } + return len; +} -static void ftdi_process_read(struct work_struct *work) -{ /* ftdi_process_read */ - struct ftdi_private *priv = - container_of(work, struct ftdi_private, rx_work.work); - struct usb_serial_port *port = priv->port; - struct urb *urb; +static void ftdi_process_read(struct usb_serial_port *port) +{ + struct urb *urb = port->read_urb; struct tty_struct *tty; - char error_flag; - unsigned char *data; - + struct ftdi_private *priv = usb_get_serial_port_data(port); + char *data = (char *)urb->transfer_buffer; int i; - int result; - int need_flip; - int packet_offset; - unsigned long flags; - - dbg("%s - port %d", __func__, port->number); - - if (port->port.count <= 0) - return; + int len; + int count = 0; tty = tty_port_tty_get(&port->port); - if (!tty) { - dbg("%s - bad tty pointer - exiting", __func__); + if (!tty) return; - } - priv = usb_get_serial_port_data(port); - if (!priv) { - dbg("%s - bad port private data pointer - exiting", __func__); - goto out; - } - - urb = port->read_urb; - if (!urb) { - dbg("%s - bad read_urb pointer - exiting", __func__); - goto out; + for (i = 0; i < urb->actual_length; i += priv->max_packet_size) { + len = min_t(int, urb->actual_length - i, priv->max_packet_size); + count += ftdi_process_packet(tty, port, priv, &data[i], len); } - data = urb->transfer_buffer; - - if (priv->rx_processed) { - dbg("%s - already processed: %d bytes, %d remain", __func__, - priv->rx_processed, - urb->actual_length - priv->rx_processed); - } else { - /* The first two bytes of every read packet are status */ - if (urb->actual_length > 2) - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); - else - dbg("Status only: %03oo %03oo", data[0], data[1]); - } - - - /* TO DO -- check for hung up line and handle appropriately: */ - /* send hangup */ - /* See acm.c - you do a tty_hangup - eg tty_hangup(tty) */ - /* if CD is dropped and the line is not CLOCAL then we should hangup */ - - need_flip = 0; - for (packet_offset = priv->rx_processed; - packet_offset < urb->actual_length; packet_offset += priv->max_packet_size) { - int length; - - /* Compare new line status to the old one, signal if different/ - N.B. packet may be processed more than once, but differences - are only processed once. */ - char new_status = data[packet_offset + 0] & - FTDI_STATUS_B0_MASK; - if (new_status != priv->prev_status) { - priv->diff_status |= - new_status ^ priv->prev_status; - wake_up_interruptible(&priv->delta_msr_wait); - priv->prev_status = new_status; - } - - length = min_t(u32, priv->max_packet_size, urb->actual_length-packet_offset)-2; - if (length < 0) { - dev_err(&port->dev, "%s - bad packet length: %d\n", - __func__, length+2); - length = 0; - } - - if (priv->rx_flags & THROTTLED) { - dbg("%s - throttled", __func__); - break; - } - if (tty_buffer_request_room(tty, length) < length) { - /* break out & wait for throttling/unthrottling to - happen */ - dbg("%s - receive room low", __func__); - break; - } - - /* Handle errors and break */ - error_flag = TTY_NORMAL; - /* Although the device uses a bitmask and hence can have - multiple errors on a packet - the order here sets the - priority the error is returned to the tty layer */ - - if (data[packet_offset+1] & FTDI_RS_OE) { - error_flag = TTY_OVERRUN; - dbg("OVERRRUN error"); - } - if (data[packet_offset+1] & FTDI_RS_BI) { - error_flag = TTY_BREAK; - dbg("BREAK received"); - usb_serial_handle_break(port); - } - if (data[packet_offset+1] & FTDI_RS_PE) { - error_flag = TTY_PARITY; - dbg("PARITY error"); - } - if (data[packet_offset+1] & FTDI_RS_FE) { - error_flag = TTY_FRAME; - dbg("FRAMING error"); - } - if (length > 0) { - for (i = 2; i < length+2; i++) { - /* Note that the error flag is duplicated for - every character received since we don't know - which character it applied to */ - if (!usb_serial_handle_sysrq_char(tty, port, - data[packet_offset + i])) - tty_insert_flip_char(tty, - data[packet_offset + i], - error_flag); - } - need_flip = 1; - } - -#ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW - /* if a parity error is detected you get status packets forever - until a character is sent without a parity error. - This doesn't work well since the application receives a - never ending stream of bad data - even though new data - hasn't been sent. Therefore I (bill) have taken this out. - However - this might make sense for framing errors and so on - so I am leaving the code in for now. - */ - else { - if (error_flag != TTY_NORMAL) { - dbg("error_flag is not normal"); - /* In this case it is just status - if that is - an error send a bad character */ - if (tty->flip.count >= TTY_FLIPBUF_SIZE) - tty_flip_buffer_push(tty); - tty_insert_flip_char(tty, 0xff, error_flag); - need_flip = 1; - } - } -#endif - } /* "for(packet_offset=0..." */ - - /* Low latency */ - if (need_flip) + if (count) tty_flip_buffer_push(tty); + tty_kref_put(tty); +} - if (packet_offset < urb->actual_length) { - /* not completely processed - record progress */ - priv->rx_processed = packet_offset; - dbg("%s - incomplete, %d bytes processed, %d remain", - __func__, packet_offset, - urb->actual_length - packet_offset); - /* check if we were throttled while processing */ - spin_lock_irqsave(&priv->rx_lock, flags); - if (priv->rx_flags & THROTTLED) { - priv->rx_flags |= ACTUALLY_THROTTLED; - spin_unlock_irqrestore(&priv->rx_lock, flags); - dbg("%s - deferring remainder until unthrottled", - __func__); - goto out; - } - spin_unlock_irqrestore(&priv->rx_lock, flags); - /* if the port is closed stop trying to read */ - if (port->port.count > 0) - /* delay processing of remainder */ - schedule_delayed_work(&priv->rx_work, 1); - else - dbg("%s - port is closed", __func__); - goto out; - } - - /* urb is completely processed */ - priv->rx_processed = 0; +static void ftdi_read_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned long flags; - /* if the port is closed stop trying to read */ - if (port->port.count > 0) { - /* Continue trying to always read */ - usb_fill_bulk_urb(port->read_urb, port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - ftdi_read_bulk_callback, port); + dbg("%s - port %d", __func__, port->number); - result = usb_submit_urb(port->read_urb, GFP_ATOMIC); - if (result) - dev_err(&port->dev, - "%s - failed resubmitting read urb, error %d\n", - __func__, result); + if (urb->status) { + dbg("%s - nonzero read bulk status received: %d", + __func__, urb->status); + return; } -out: - tty_kref_put(tty); -} /* ftdi_process_read */ + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, urb->transfer_buffer); + ftdi_process_read(port); + + spin_lock_irqsave(&port->lock, flags); + port->throttled = port->throttle_req; + if (!port->throttled) { + spin_unlock_irqrestore(&port->lock, flags); + ftdi_submit_read_urb(port, GFP_ATOMIC); + } else + spin_unlock_irqrestore(&port->lock, flags); +} static void ftdi_break_ctl(struct tty_struct *tty, int break_state) { @@ -2609,33 +2446,31 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file *file, static void ftdi_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned long flags; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->rx_lock, flags); - priv->rx_flags |= THROTTLED; - spin_unlock_irqrestore(&priv->rx_lock, flags); + spin_lock_irqsave(&port->lock, flags); + port->throttle_req = 1; + spin_unlock_irqrestore(&port->lock, flags); } - -static void ftdi_unthrottle(struct tty_struct *tty) +void ftdi_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - struct ftdi_private *priv = usb_get_serial_port_data(port); - int actually_throttled; + int was_throttled; unsigned long flags; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->rx_lock, flags); - actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; - priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED); - spin_unlock_irqrestore(&priv->rx_lock, flags); + spin_lock_irqsave(&port->lock, flags); + was_throttled = port->throttled; + port->throttled = port->throttle_req = 0; + spin_unlock_irqrestore(&port->lock, flags); - if (actually_throttled) - schedule_delayed_work(&priv->rx_work, 0); + /* Resubmit urb if throttled and open. */ + if (was_throttled && test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + ftdi_submit_read_urb(port, GFP_KERNEL); } static int __init ftdi_init(void) diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 20432d345529..5ac900e5a50e 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1390,14 +1390,13 @@ static void garmin_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - unsigned long flags; dbg("%s - port %d", __func__, port->number); /* set flag, data received will be put into a queue for later processing */ - spin_lock_irqsave(&garmin_data_p->lock, flags); + spin_lock_irq(&garmin_data_p->lock); garmin_data_p->flags |= FLAGS_QUEUING|FLAGS_THROTTLED; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + spin_unlock_irq(&garmin_data_p->lock); } @@ -1405,13 +1404,12 @@ static void garmin_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - unsigned long flags; int status; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&garmin_data_p->lock, flags); + spin_lock_irq(&garmin_data_p->lock); garmin_data_p->flags &= ~FLAGS_THROTTLED; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + spin_unlock_irq(&garmin_data_p->lock); /* in native mode send queued data to tty, in serial mode nothing needs to be done here */ @@ -1419,7 +1417,7 @@ static void garmin_unthrottle(struct tty_struct *tty) garmin_flush_queue(garmin_data_p); if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) { - status = usb_submit_urb(port->read_urb, GFP_ATOMIC); + status = usb_submit_urb(port->read_urb, GFP_KERNEL); if (status) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index deba08c7a015..bbe005cefcfb 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -546,7 +546,7 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty) if (was_throttled) { /* Resume reading from device */ - usb_serial_generic_resubmit_read_urb(port, GFP_KERNEL); + flush_and_resubmit_read_urb(port); } } diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 24fcc64b837d..d6231c38813e 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -966,6 +966,15 @@ static int ipaq_calc_num_ports(struct usb_serial *serial) static int ipaq_startup(struct usb_serial *serial) { dbg("%s", __func__); + + /* Some of the devices in ipaq_id_table[] are composite, and we + * shouldn't bind to all the interfaces. This test will rule out + * some obviously invalid possibilities. + */ + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) + return -ENODEV; + if (serial->dev->actconfig->desc.bConfigurationValue != 1) { /* * FIXME: HP iPaq rx3715, possibly others, have 1 config that diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 257c16cc6b2a..1296a097f5c3 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -290,7 +290,7 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty) /* just restart the receive interrupt URB */ dbg("keyspan_pda_rx_unthrottle port %d", port->number); port->interrupt_in_urb->dev = port->serial->dev; - if (usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC)) + if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL)) dbg(" usb_submit_urb(read urb) failed"); return; } diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index f7373371b137..3a7873806f46 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -951,7 +951,7 @@ static void klsi_105_unthrottle(struct tty_struct *tty) dbg("%s - port %d", __func__, port->number); port->read_urb->dev = port->serial->dev; - result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index ad4998bbf16f..cd009cb280a5 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -777,20 +777,19 @@ static void mct_u232_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct mct_u232_private *priv = usb_get_serial_port_data(port); - unsigned long flags; unsigned int control_state; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irq(&priv->lock); priv->rx_flags |= THROTTLED; if (C_CRTSCTS(tty)) { priv->control_state &= ~TIOCM_RTS; control_state = priv->control_state; - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irq(&priv->lock); (void) mct_u232_set_modem_ctrl(port->serial, control_state); } else { - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irq(&priv->lock); } } @@ -799,20 +798,19 @@ static void mct_u232_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct mct_u232_private *priv = usb_get_serial_port_data(port); - unsigned long flags; unsigned int control_state; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irq(&priv->lock); if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) { priv->rx_flags &= ~THROTTLED; priv->control_state |= TIOCM_RTS; control_state = priv->control_state; - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irq(&priv->lock); (void) mct_u232_set_modem_ctrl(port->serial, control_state); } else { - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irq(&priv->lock); } } diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 1085a577c5c1..80f59b6350cb 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -314,21 +314,24 @@ static void opticon_unthrottle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct opticon_private *priv = usb_get_serial_data(port->serial); unsigned long flags; - int result; + int result, was_throttled; dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); priv->throttled = false; + was_throttled = priv->actually_throttled; priv->actually_throttled = false; spin_unlock_irqrestore(&priv->lock, flags); priv->bulk_read_urb->dev = port->serial->dev; - result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC); - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", + if (was_throttled) { + result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC); + if (result) + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", __func__, result); + } } static int opticon_tiocmget(struct tty_struct *tty, struct file *file) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f66e39883218..0577e4b61114 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -165,6 +165,7 @@ static int option_resume(struct usb_serial *serial); #define HUAWEI_PRODUCT_E143D 0x143D #define HUAWEI_PRODUCT_E143E 0x143E #define HUAWEI_PRODUCT_E143F 0x143F +#define HUAWEI_PRODUCT_E14AC 0x14AC #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -307,6 +308,7 @@ static int option_resume(struct usb_serial *serial); #define DLINK_VENDOR_ID 0x1186 #define DLINK_PRODUCT_DWM_652 0x3e04 +#define DLINK_PRODUCT_DWM_652_U5 0xce16 #define QISDA_VENDOR_ID 0x1da5 #define QISDA_PRODUCT_H21_4512 0x4512 @@ -314,10 +316,14 @@ static int option_resume(struct usb_serial *serial); #define QISDA_PRODUCT_H20_4515 0x4515 #define QISDA_PRODUCT_H20_4519 0x4519 +/* TLAYTECH PRODUCTS */ +#define TLAYTECH_VENDOR_ID 0x20B9 +#define TLAYTECH_PRODUCT_TEU800 0x1682 /* TOSHIBA PRODUCTS */ #define TOSHIBA_VENDOR_ID 0x0930 #define TOSHIBA_PRODUCT_HSDPA_MINICARD 0x1302 +#define TOSHIBA_PRODUCT_G450 0x0d45 #define ALINK_VENDOR_ID 0x1e0e #define ALINK_PRODUCT_3GU 0x9200 @@ -326,6 +332,13 @@ static int option_resume(struct usb_serial *serial); #define ALCATEL_VENDOR_ID 0x1bbb #define ALCATEL_PRODUCT_X060S 0x0000 +/* Airplus products */ +#define AIRPLUS_VENDOR_ID 0x1011 +#define AIRPLUS_PRODUCT_MCD650 0x3198 + +/* 4G Systems products */ +#define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e +#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, @@ -424,6 +437,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */ @@ -577,14 +591,19 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, + { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) }, + { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) }, { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) }, { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, + { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, + { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, + { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 0f4a70ce3823..c644e26394b4 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -288,7 +288,7 @@ static void setup_line(struct work_struct *work) dbg("%s(): submitting interrupt urb", __func__); port->interrupt_in_urb->dev = port->serial->dev; - result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result != 0) { dev_err(&port->dev, "%s(): usb_submit_urb() failed" " with error %d\n", __func__, result); @@ -335,7 +335,7 @@ void send_data(struct work_struct *work) dbg("%s(): submitting interrupt urb", __func__); port->interrupt_in_urb->dev = port->serial->dev; - result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); if (result != 0) { dev_err(&port->dev, "%s(): usb_submit_urb() failed" " with error %d\n", __func__, result); @@ -349,7 +349,7 @@ void send_data(struct work_struct *work) port->write_urb->transfer_buffer_length = count; port->write_urb->dev = port->serial->dev; - result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + result = usb_submit_urb(port->write_urb, GFP_NOIO); if (result != 0) { dev_err(&port->dev, "%s(): usb_submit_urb() failed" " with error %d\n", __func__, result); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 1128e01525b1..9ec1a49e2362 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -1046,13 +1046,15 @@ static void pl2303_push_data(struct tty_struct *tty, /* overrun is special, not associated with a char */ if (line_status & UART_OVERRUN_ERROR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); - if (port->console && port->sysrq) { + + if (tty_flag == TTY_NORMAL && !(port->console && port->sysrq)) + tty_insert_flip_string(tty, data, urb->actual_length); + else { int i; for (i = 0; i < urb->actual_length; ++i) if (!usb_serial_handle_sysrq_char(tty, port, data[i])) tty_insert_flip_char(tty, data[i], tty_flag); - } else - tty_insert_flip_string(tty, data, urb->actual_length); + } tty_flip_buffer_push(tty); } diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 68fa0e43b781..5019325ba25d 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -17,7 +17,7 @@ Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org> */ -#define DRIVER_VERSION "v.1.3.7" +#define DRIVER_VERSION "v.1.3.8" #define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer" #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" @@ -296,7 +296,6 @@ struct sierra_port_private { int dsr_state; int dcd_state; int ri_state; - unsigned int opened:1; }; @@ -306,6 +305,8 @@ static int sierra_send_setup(struct usb_serial_port *port) struct sierra_port_private *portdata; __u16 interface = 0; int val = 0; + int do_send = 0; + int retval; dev_dbg(&port->dev, "%s\n", __func__); @@ -324,10 +325,7 @@ static int sierra_send_setup(struct usb_serial_port *port) */ if (port->interrupt_in_urb) { /* send control message */ - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); + do_send = 1; } } @@ -339,12 +337,18 @@ static int sierra_send_setup(struct usb_serial_port *port) interface = 1; else if (port->bulk_out_endpointAddress == 5) interface = 2; - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); + + do_send = 1; } - return 0; + if (!do_send) + return 0; + + usb_autopm_get_interface(serial->interface); + retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); + usb_autopm_put_interface(serial->interface); + + return retval; } static void sierra_set_termios(struct tty_struct *tty, @@ -773,8 +777,11 @@ static void sierra_close(struct usb_serial_port *port) if (serial->dev) { mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) + if (!serial->disconnected) { + serial->interface->needs_remote_wakeup = 0; + usb_autopm_get_interface(serial->interface); sierra_send_setup(port); + } mutex_unlock(&serial->disc_mutex); spin_lock_irq(&intfdata->susp_lock); portdata->opened = 0; @@ -788,8 +795,6 @@ static void sierra_close(struct usb_serial_port *port) sierra_release_urb(portdata->in_urbs[i]); portdata->in_urbs[i] = NULL; } - usb_autopm_get_interface(serial->interface); - serial->interface->needs_remote_wakeup = 0; } } @@ -827,6 +832,8 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) if (err) { /* get rid of everything as in close */ sierra_close(port); + /* restore balance for autopm */ + usb_autopm_put_interface(serial->interface); return err; } sierra_send_setup(port); @@ -912,9 +919,10 @@ static void sierra_release(struct usb_serial *serial) } } +#ifdef CONFIG_PM static void stop_read_write_urbs(struct usb_serial *serial) { - int i, j; + int i; struct usb_serial_port *port; struct sierra_port_private *portdata; @@ -922,8 +930,7 @@ static void stop_read_write_urbs(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); - for (j = 0; j < N_IN_URB; j++) - usb_kill_urb(portdata->in_urbs[j]); + sierra_stop_rx_urbs(port); usb_kill_anchored_urbs(&portdata->active); } } @@ -988,6 +995,10 @@ static int sierra_resume(struct usb_serial *serial) return ec ? -EIO : 0; } +#else +#define sierra_suspend NULL +#define sierra_resume NULL +#endif static struct usb_serial_driver sierra_device = { .driver = { diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index cb7e95f9fcbf..b282c0f2d8e5 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -165,34 +165,36 @@ static void symbol_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct symbol_private *priv = usb_get_serial_data(port->serial); - unsigned long flags; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irq(&priv->lock); priv->throttled = true; - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irq(&priv->lock); } static void symbol_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct symbol_private *priv = usb_get_serial_data(port->serial); - unsigned long flags; int result; + bool was_throttled; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irq(&priv->lock); priv->throttled = false; + was_throttled = priv->actually_throttled; priv->actually_throttled = false; - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irq(&priv->lock); priv->int_urb->dev = port->serial->dev; - result = usb_submit_urb(priv->int_urb, GFP_ATOMIC); - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", + if (was_throttled) { + result = usb_submit_urb(priv->int_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", __func__, result); + } } static int symbol_startup(struct usb_serial *serial) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index ff75a3589e7e..bd3fa7ff15b1 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -156,7 +156,8 @@ static void destroy_serial(struct kref *kref) if (serial->minor != SERIAL_TTY_NO_MINOR) return_serial(serial); - serial->type->release(serial); + if (serial->attached) + serial->type->release(serial); /* Now that nothing is using the ports, they can be freed */ for (i = 0; i < serial->num_port_pointers; ++i) { @@ -192,7 +193,7 @@ void usb_serial_put(struct usb_serial *serial) * This is the first place a new tty gets used. Hence this is where we * acquire references to the usb_serial structure and the driver module, * where we store a pointer to the port, and where we do an autoresume. - * All these actions are reversed in serial_release(). + * All these actions are reversed in serial_cleanup(). */ static int serial_install(struct tty_driver *driver, struct tty_struct *tty) { @@ -339,15 +340,16 @@ static void serial_close(struct tty_struct *tty, struct file *filp) } /** - * serial_release - free resources post close/hangup + * serial_cleanup - free resources post close/hangup * @port: port to free up * * Do the resource freeing and refcount dropping for the port. * Avoid freeing the console. * - * Called when the last tty kref is dropped. + * Called asynchronously after the last tty kref is dropped, + * and the tty layer has already done the tty_shutdown(tty); */ -static void serial_release(struct tty_struct *tty) +static void serial_cleanup(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial; @@ -361,9 +363,6 @@ static void serial_release(struct tty_struct *tty) dbg("%s - port %d", __func__, port->number); - /* Standard shutdown processing */ - tty_shutdown(tty); - tty->driver_data = NULL; serial = port->serial; @@ -1061,12 +1060,15 @@ int usb_serial_probe(struct usb_interface *interface, module_put(type->driver.owner); if (retval < 0) goto probe_error; + serial->attached = 1; if (retval > 0) { /* quietly accept this device, but don't bind to a serial port as it's about to disappear */ serial->num_ports = 0; goto exit; } + } else { + serial->attached = 1; } if (get_free_serial(serial, num_ports, &minor) == NULL) { @@ -1166,8 +1168,10 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) if (serial->type->suspend) { r = serial->type->suspend(serial, message); - if (r < 0) + if (r < 0) { + serial->suspending = 0; goto err_out; + } } for (i = 0; i < serial->num_ports; ++i) { @@ -1210,7 +1214,7 @@ static const struct tty_operations serial_ops = { .chars_in_buffer = serial_chars_in_buffer, .tiocmget = serial_tiocmget, .tiocmset = serial_tiocmset, - .shutdown = serial_release, + .cleanup = serial_cleanup, .install = serial_install, .proc_fops = &serial_proc_fops, }; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 1aa5d20a5d99..ad1f9232292d 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -513,7 +513,8 @@ static void visor_read_bulk_callback(struct urb *urb) tty_kref_put(tty); } spin_lock(&priv->lock); - priv->bytes_in += available_room; + if (tty) + priv->bytes_in += available_room; } else { spin_lock(&priv->lock); @@ -582,12 +583,11 @@ static void visor_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct visor_private *priv = usb_get_serial_port_data(port); - unsigned long flags; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irq(&priv->lock); priv->throttled = 1; - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irq(&priv->lock); } @@ -595,21 +595,23 @@ static void visor_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct visor_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - int result; + int result, was_throttled; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); + spin_lock_irq(&priv->lock); priv->throttled = 0; + was_throttled = priv->actually_throttled; priv->actually_throttled = 0; - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irq(&priv->lock); - port->read_urb->dev = port->serial->dev; - result = usb_submit_urb(port->read_urb, GFP_ATOMIC); - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", + if (was_throttled) { + port->read_urb->dev = port->serial->dev; + result = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", __func__, result); + } } static int palm_os_3_probe(struct usb_serial *serial, diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 62424eec33ec..1093d2eb046a 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -949,13 +949,12 @@ static void whiteheat_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); - unsigned long flags; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&info->lock, flags); + spin_lock_irq(&info->lock); info->flags |= THROTTLED; - spin_unlock_irqrestore(&info->lock, flags); + spin_unlock_irq(&info->lock); return; } @@ -966,14 +965,13 @@ static void whiteheat_unthrottle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); int actually_throttled; - unsigned long flags; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&info->lock, flags); + spin_lock_irq(&info->lock); actually_throttled = info->flags & ACTUALLY_THROTTLED; info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED); - spin_unlock_irqrestore(&info->lock, flags); + spin_unlock_irq(&info->lock); if (actually_throttled) rx_data_softint(&info->rx_work); diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index e20dc525d177..589f6b4404f0 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -696,7 +696,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) /* device supports and needs bigger sense buffer */ if (us->fflags & US_FL_SANE_SENSE) sense_size = ~0; - +Retry_Sense: US_DEBUGP("Issuing auto-REQUEST_SENSE\n"); scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size); @@ -720,6 +720,21 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) srb->result = DID_ABORT << 16; goto Handle_Errors; } + + /* Some devices claim to support larger sense but fail when + * trying to request it. When a transport failure happens + * using US_FS_SANE_SENSE, we always retry with a standard + * (small) sense request. This fixes some USB GSM modems + */ + if (temp_result == USB_STOR_TRANSPORT_FAILED && + (us->fflags & US_FL_SANE_SENSE) && + sense_size != US_SENSE_SIZE) { + US_DEBUGP("-- auto-sense failure, retry small sense\n"); + sense_size = US_SENSE_SIZE; + goto Retry_Sense; + } + + /* Other failures */ if (temp_result != USB_STOR_TRANSPORT_GOOD) { US_DEBUGP("-- auto-sense failure\n"); @@ -768,17 +783,32 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) /* set the result so the higher layers expect this data */ srb->result = SAM_STAT_CHECK_CONDITION; - /* If things are really okay, then let's show that. Zero - * out the sense buffer so the higher layers won't realize - * we did an unsolicited auto-sense. */ - if (result == USB_STOR_TRANSPORT_GOOD && - /* Filemark 0, ignore EOM, ILI 0, no sense */ + /* We often get empty sense data. This could indicate that + * everything worked or that there was an unspecified + * problem. We have to decide which. + */ + if ( /* Filemark 0, ignore EOM, ILI 0, no sense */ (srb->sense_buffer[2] & 0xaf) == 0 && /* No ASC or ASCQ */ srb->sense_buffer[12] == 0 && srb->sense_buffer[13] == 0) { - srb->result = SAM_STAT_GOOD; - srb->sense_buffer[0] = 0x0; + + /* If things are really okay, then let's show that. + * Zero out the sense buffer so the higher layers + * won't realize we did an unsolicited auto-sense. + */ + if (result == USB_STOR_TRANSPORT_GOOD) { + srb->result = SAM_STAT_GOOD; + srb->sense_buffer[0] = 0x0; + + /* If there was a problem, report an unspecified + * hardware error to prevent the higher layers from + * entering an infinite retry loop. + */ + } else { + srb->result = DID_ERROR << 16; + srb->sense_buffer[2] = HARDWARE_ERROR; + } } } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 079ae0f7bec1..d4f034ebaa8a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1823,6 +1823,13 @@ UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Sergey Pinaev <dfo@antex.ru> */ +UNUSUAL_DEV( 0x4102, 0x1059, 0x0000, 0x0000, + "iRiver", + "P7K", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + /* * David Härdeman <david@2gen.com> * The key makes the SCSI stack print confusing (but harmless) messages diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c index b2f149fedcc5..4516c36436e6 100644 --- a/drivers/usb/wusbcore/security.c +++ b/drivers/usb/wusbcore/security.c @@ -200,35 +200,40 @@ int wusb_dev_sec_add(struct wusbhc *wusbhc, { int result, bytes, secd_size; struct device *dev = &usb_dev->dev; - struct usb_security_descriptor secd; + struct usb_security_descriptor *secd; const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL; - void *secd_buf; const void *itr, *top; char buf[64]; + secd = kmalloc(sizeof(struct usb_security_descriptor), GFP_KERNEL); + if (secd == NULL) { + result = -ENOMEM; + goto out; + } + result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, - 0, &secd, sizeof(secd)); + 0, secd, sizeof(struct usb_security_descriptor)); if (result < sizeof(secd)) { dev_err(dev, "Can't read security descriptor or " "not enough data: %d\n", result); - goto error_secd; + goto out; } - secd_size = le16_to_cpu(secd.wTotalLength); - secd_buf = kmalloc(secd_size, GFP_KERNEL); - if (secd_buf == NULL) { + secd_size = le16_to_cpu(secd->wTotalLength); + secd = krealloc(secd, secd_size, GFP_KERNEL); + if (secd == NULL) { dev_err(dev, "Can't allocate space for security descriptors\n"); - goto error_secd_alloc; + goto out; } result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, - 0, secd_buf, secd_size); + 0, secd, secd_size); if (result < secd_size) { dev_err(dev, "Can't read security descriptor or " "not enough data: %d\n", result); - goto error_secd_all; + goto out; } bytes = 0; - itr = secd_buf + sizeof(secd); - top = secd_buf + result; + itr = &secd[1]; + top = (void *)secd + result; while (itr < top) { etd = itr; if (top - itr < sizeof(*etd)) { @@ -259,24 +264,16 @@ int wusb_dev_sec_add(struct wusbhc *wusbhc, dev_err(dev, "WUSB device doesn't support CCM1 encryption, " "can't use!\n"); result = -EINVAL; - goto error_no_ccm1; + goto out; } wusb_dev->ccm1_etd = *ccm1_etd; dev_dbg(dev, "supported encryption: %s; using %s (0x%02x/%02x)\n", buf, wusb_et_name(ccm1_etd->bEncryptionType), ccm1_etd->bEncryptionValue, ccm1_etd->bAuthKeyIndex); result = 0; - kfree(secd_buf); out: + kfree(secd); return result; - - -error_no_ccm1: -error_secd_all: - kfree(secd_buf); -error_secd_alloc: -error_secd: - goto out; } void wusb_dev_sec_rm(struct wusb_dev *wusb_dev) |