diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/core/hcd.c | 3 | ||||
-rw-r--r-- | drivers/usb/core/hub.c | 39 | ||||
-rw-r--r-- | drivers/usb/gadget/fsl_usb2_udc.c | 2 | ||||
-rw-r--r-- | drivers/usb/gadget/omap_udc.c | 4 | ||||
-rw-r--r-- | drivers/usb/host/ehci-hcd.c | 26 | ||||
-rw-r--r-- | drivers/usb/host/ehci-sched.c | 32 | ||||
-rw-r--r-- | drivers/usb/musb/Kconfig | 1 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.c | 4 | ||||
-rw-r--r-- | drivers/usb/musb/omap2430.c | 4 | ||||
-rw-r--r-- | drivers/usb/musb/omap2430.h | 4 | ||||
-rw-r--r-- | drivers/usb/serial/cp2101.c | 3 | ||||
-rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 3 | ||||
-rw-r--r-- | drivers/usb/serial/ftdi_sio.h | 5 | ||||
-rw-r--r-- | drivers/usb/serial/option.c | 2 | ||||
-rw-r--r-- | drivers/usb/serial/sierra.c | 12 | ||||
-rw-r--r-- | drivers/usb/serial/ti_usb_3410_5052.c | 2 | ||||
-rw-r--r-- | drivers/usb/serial/usb-serial.c | 4 | ||||
-rw-r--r-- | drivers/usb/storage/Kconfig | 12 | ||||
-rw-r--r-- | drivers/usb/storage/Makefile | 3 | ||||
-rw-r--r-- | drivers/usb/storage/unusual_devs.h | 30 | ||||
-rw-r--r-- | drivers/usb/storage/usb.c | 2 |
21 files changed, 112 insertions, 85 deletions
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 8abd4e59bf4a..8ab389dca2b9 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1876,7 +1876,8 @@ int usb_add_hcd(struct usb_hcd *hcd, * with IRQF_SHARED. As usb_hcd_irq() will always disable * interrupts we can remove it here. */ - irqflags &= ~IRQF_DISABLED; + if (irqflags & IRQF_SHARED) + irqflags &= ~IRQF_DISABLED; snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6a5cb018383d..d99963873e37 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2683,35 +2683,17 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, USB_PORT_STAT_C_ENABLE); #endif - /* Try to use the debounce delay for protection against - * port-enable changes caused, for example, by EMI. - */ - if (portchange & (USB_PORT_STAT_C_CONNECTION | - USB_PORT_STAT_C_ENABLE)) { - status = hub_port_debounce(hub, port1); - if (status < 0) { - if (printk_ratelimit()) - dev_err (hub_dev, "connect-debounce failed, " - "port %d disabled\n", port1); - portstatus &= ~USB_PORT_STAT_CONNECTION; - } else { - portstatus = status; - } - } - /* Try to resuscitate an existing device */ udev = hdev->children[port1-1]; if ((portstatus & USB_PORT_STAT_CONNECTION) && udev && udev->state != USB_STATE_NOTATTACHED) { - usb_lock_device(udev); if (portstatus & USB_PORT_STAT_ENABLE) { status = 0; /* Nothing to do */ - } else if (!udev->persist_enabled) { - status = -ENODEV; /* Mustn't resuscitate */ #ifdef CONFIG_USB_SUSPEND - } else if (udev->state == USB_STATE_SUSPENDED) { + } else if (udev->state == USB_STATE_SUSPENDED && + udev->persist_enabled) { /* For a suspended device, treat this as a * remote wakeup event. */ @@ -2726,7 +2708,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, #endif } else { - status = usb_reset_device(udev); + status = -ENODEV; /* Don't resuscitate */ } usb_unlock_device(udev); @@ -2741,6 +2723,19 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, usb_disconnect(&hdev->children[port1-1]); clear_bit(port1, hub->change_bits); + if (portchange & (USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE)) { + status = hub_port_debounce(hub, port1); + if (status < 0) { + if (printk_ratelimit()) + dev_err(hub_dev, "connect-debounce failed, " + "port %d disabled\n", port1); + portstatus &= ~USB_PORT_STAT_CONNECTION; + } else { + portstatus = status; + } + } + /* Return now if debouncing failed or nothing is connected */ if (!(portstatus & USB_PORT_STAT_CONNECTION)) { @@ -2748,7 +2743,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2 && !(portstatus & (1 << USB_PORT_FEAT_POWER))) set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); - + if (portstatus & USB_PORT_STAT_ENABLE) goto done; return; diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 1cfccf102a2d..45ad556169f1 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -223,7 +223,7 @@ static int dr_controller_setup(struct fsl_udc *udc) fsl_writel(tmp, &dr_regs->endpointlistaddr); VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x", - (int)udc->ep_qh, (int)tmp, + udc->ep_qh, (int)tmp, fsl_readl(&dr_regs->endpointlistaddr)); /* Config PHY interface */ diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 574c53831a05..bb54cca4c543 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -787,7 +787,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - (unsigned long) io_v2p(UDC_DATA_DMA), + UDC_DATA_DMA, 0, 0); } } else { @@ -804,7 +804,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - (unsigned long) io_v2p(UDC_DATA_DMA), + UDC_DATA_DMA, 0, 0); /* EMIFF or SDRC */ omap_set_dma_dest_burst_mode(ep->lch, diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index d9d53f289caf..8409e0705d63 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -145,16 +145,6 @@ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr, return -ETIMEDOUT; } -static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, - u32 mask, u32 done, int usec) -{ - int error = handshake(ehci, ptr, mask, done, usec); - if (error) - ehci_to_hcd(ehci)->state = HC_STATE_HALT; - - return error; -} - /* force HC to halt state from unknown (EHCI spec section 2.3) */ static int ehci_halt (struct ehci_hcd *ehci) { @@ -173,6 +163,22 @@ static int ehci_halt (struct ehci_hcd *ehci) STS_HALT, STS_HALT, 16 * 125); } +static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, + u32 mask, u32 done, int usec) +{ + int error; + + error = handshake(ehci, ptr, mask, done, usec); + if (error) { + ehci_halt(ehci); + ehci_to_hcd(ehci)->state = HC_STATE_HALT; + ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n", + ptr, mask, done, error); + } + + return error; +} + /* put TDI/ARC silicon into EHCI mode */ static void tdi_reset (struct ehci_hcd *ehci) { diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index b7853c8bac0f..4a0c5a78b2ed 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -437,6 +437,9 @@ static int enable_periodic (struct ehci_hcd *ehci) u32 cmd; int status; + if (ehci->periodic_sched++) + return 0; + /* did clearing PSE did take effect yet? * takes effect only at frame boundaries... */ @@ -461,6 +464,9 @@ static int disable_periodic (struct ehci_hcd *ehci) u32 cmd; int status; + if (--ehci->periodic_sched) + return 0; + /* did setting PSE not take effect yet? * takes effect only at frame boundaries... */ @@ -544,13 +550,10 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) : (qh->usecs * 8); /* maybe enable periodic schedule processing */ - if (!ehci->periodic_sched++) - return enable_periodic (ehci); - - return 0; + return enable_periodic(ehci); } -static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) +static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) { unsigned i; unsigned period; @@ -586,9 +589,7 @@ static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) qh_put (qh); /* maybe turn off periodic schedule */ - ehci->periodic_sched--; - if (!ehci->periodic_sched) - (void) disable_periodic (ehci); + return disable_periodic(ehci); } static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh) @@ -1562,9 +1563,7 @@ itd_link_urb ( urb->hcpriv = NULL; timer_action (ehci, TIMER_IO_WATCHDOG); - if (unlikely (!ehci->periodic_sched++)) - return enable_periodic (ehci); - return 0; + return enable_periodic(ehci); } #define ISO_ERRS (EHCI_ISOC_BUF_ERR | EHCI_ISOC_BABBLE | EHCI_ISOC_XACTERR) @@ -1642,7 +1641,7 @@ itd_complete ( ehci_urb_done(ehci, urb, 0); retval = true; urb = NULL; - ehci->periodic_sched--; + (void) disable_periodic(ehci); ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (unlikely (list_empty (&stream->td_list))) { @@ -1951,9 +1950,7 @@ sitd_link_urb ( urb->hcpriv = NULL; timer_action (ehci, TIMER_IO_WATCHDOG); - if (!ehci->periodic_sched++) - return enable_periodic (ehci); - return 0; + return enable_periodic(ehci); } /*-------------------------------------------------------------------------*/ @@ -2019,7 +2016,7 @@ sitd_complete ( ehci_urb_done(ehci, urb, 0); retval = true; urb = NULL; - ehci->periodic_sched--; + (void) disable_periodic(ehci); ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (list_empty (&stream->td_list)) { @@ -2243,8 +2240,7 @@ restart: if (unlikely (modified)) { if (likely(ehci->periodic_sched > 0)) goto restart; - /* maybe we can short-circuit this scan! */ - disable_periodic(ehci); + /* short-circuit this scan */ now_uframe = clock; break; } diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index a0017486ad4e..58b2b8fc9439 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -9,6 +9,7 @@ comment "Enable Host or Gadget support to see Inventra options" # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC depends on (USB || USB_GADGET) && HAVE_CLK + depends on !SUPERH select TWL4030_USB if MACH_OMAP_3430SDP tristate 'Inventra Highspeed Dual Role Controller (TI, ...)' help diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index c5b8f0296fcf..128e949db47c 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -100,8 +100,8 @@ #include <linux/io.h> #ifdef CONFIG_ARM -#include <asm/arch/hardware.h> -#include <asm/arch/memory.h> +#include <mach/hardware.h> +#include <mach/memory.h> #include <asm/mach-types.h> #endif diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 298b22e6ad0d..9d2dcb121c5e 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -35,8 +35,8 @@ #include <linux/io.h> #include <asm/mach-types.h> -#include <asm/arch/hardware.h> -#include <asm/arch/mux.h> +#include <mach/hardware.h> +#include <mach/mux.h> #include "musb_core.h" #include "omap2430.h" diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h index 786a62071f72..dc7670718cd2 100644 --- a/drivers/usb/musb/omap2430.h +++ b/drivers/usb/musb/omap2430.h @@ -11,8 +11,8 @@ #define __MUSB_OMAP243X_H__ #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) -#include <asm/arch/hardware.h> -#include <asm/arch/usb.h> +#include <mach/hardware.h> +#include <mach/usb.h> /* * OMAP2430-specific definitions diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 442cba69cce5..1279553381e3 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -72,6 +72,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ + { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ @@ -83,6 +84,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ + { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ @@ -93,6 +95,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ + { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { } /* Terminating Entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 984f6eff4c47..3dc93b542b30 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -654,6 +654,9 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 382265bba969..8a5b6df3a976 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -750,6 +750,7 @@ #define PAPOUCH_VID 0x5050 /* Vendor ID */ #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ /* * ACG Identification Technologies GmbH products (http://www.acg.de/). @@ -838,6 +839,10 @@ /* Rig Expert Ukraine devices */ #define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9f9cd36455f4..73f8277f88f2 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -218,6 +218,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 #define ZTE_PRODUCT_MF628 0x0015 +#define ZTE_PRODUCT_CDMA_TECH 0xfffe static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, @@ -347,6 +348,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, + { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 706033753adb..ea1a103c99be 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -14,7 +14,7 @@ Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org> */ -#define DRIVER_VERSION "v.1.2.13a" +#define DRIVER_VERSION "v.1.3.2" #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>" #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" @@ -30,9 +30,6 @@ #define SWIMS_USB_REQUEST_SetPower 0x00 #define SWIMS_USB_REQUEST_SetNmea 0x07 -#define SWIMS_USB_REQUEST_SetMode 0x0B -#define SWIMS_USB_REQUEST_GetSwocInfo 0x0A -#define SWIMS_SET_MODE_Modem 0x0001 /* per port private data */ #define N_IN_URB 4 @@ -163,7 +160,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ - { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */ + { USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ @@ -175,6 +172,8 @@ static struct usb_device_id id_table [] = { /* Sierra Wireless Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) }, { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */ + { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */ + { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */ @@ -187,6 +186,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */ { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */ { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */ + { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */ { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */ { USB_DEVICE(0x1199, 0x683C) }, /* Sierra Wireless MC8790 */ { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8790 */ @@ -204,6 +204,8 @@ static struct usb_device_id id_table [] = { /* Sierra Wireless Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)}, /* Sierra Wireless Device */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)}, + /* Sierra Wireless Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)}, { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index e39c779e4160..9a3e495c769c 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1744,7 +1744,7 @@ static int ti_download_firmware(struct ti_device *tdev, int type) if (buffer) { memcpy(buffer, fw_p->data, fw_p->size); memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size); - ti_do_download(dev, pipe, buffer, fw_p->size); + status = ti_do_download(dev, pipe, buffer, fw_p->size); kfree(buffer); } release_firmware(fw_p); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index b157c48e8b78..4f7f9e3ae0a4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -733,7 +733,9 @@ int usb_serial_probe(struct usb_interface *interface, ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) && (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) || ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID))) { + (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) || + ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) { if (interface != dev->actconfig->interface[0]) { /* check out the endpoints of the other interface*/ iface_desc = dev->actconfig->interface[0]->cur_altsetting; diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index c76034672c18..3d9249632ae1 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -146,18 +146,6 @@ config USB_STORAGE_KARMA on the resulting scsi device node returns the Karma to normal operation. -config USB_STORAGE_SIERRA - bool "Sierra Wireless TRU-Install Feature Support" - depends on USB_STORAGE - help - Say Y here to include additional code to support Sierra Wireless - products with the TRU-Install feature (e.g., AC597E, AC881U). - - This code switches the Sierra Wireless device from being in - Mass Storage mode to Modem mode. It also has the ability to - support host software upgrades should full Linux support be added - to TRU-Install. - config USB_STORAGE_CYPRESS_ATACB bool "SAT emulation on Cypress USB/ATA Bridge with ATACB" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index bc3415b475c9..7f8beb5366ae 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -21,11 +21,10 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o -usb-storage-obj-$(CONFIG_USB_STORAGE_SIERRA) += sierra_ms.o usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ - initializers.o $(usb-storage-obj-y) + initializers.o sierra_ms.o $(usb-storage-obj-y) ifneq ($(CONFIG_USB_LIBUSUAL),) obj-$(CONFIG_USB) += libusual.o diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ba412e68d474..cd155475cb6e 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -160,6 +160,13 @@ UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), +/* Reported by Filip Joelsson <filip@blueturtle.nu> */ +UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600, + "Nokia", + "Nokia 3110c", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Mario Rettig <mariorettig@web.de> */ UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, "Nokia", @@ -232,6 +239,20 @@ UNUSUAL_DEV( 0x0421, 0x04b9, 0x0551, 0x0551, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Richard Nauber <RichardNauber@web.de> */ +UNUSUAL_DEV( 0x0421, 0x04fa, 0x0601, 0x0601, + "Nokia", + "6300", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* Patch for Nokia 5310 capacity */ +UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, + "Nokia", + "5310", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", @@ -987,6 +1008,13 @@ UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Adrian Pilchowiec <adi1981@epf.pl> */ +UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, + "RockChip", + "MP3", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), + /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com> * This USB MP3/AVI player device fails and disconnects if more than 128 * sectors (64kB) are read/written in a single command, and may be present @@ -1576,7 +1604,6 @@ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, 0), -#ifdef CONFIG_USB_STORAGE_SIERRA /* Reported by Kevin Lloyd <linux@sierrawireless.com> * Entry is needed for the initializer function override, * which instructs the device to load as a modem @@ -1587,7 +1614,6 @@ UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999, "USB MMC Storage", US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init, 0), -#endif /* Reported by Jaco Kroon <jaco@kroon.co.za> * The usb-storage module found on the Digitech GNX4 (and supposedly other diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 73679aa506de..27016fd2cad1 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -102,9 +102,7 @@ #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB #include "cypress_atacb.h" #endif -#ifdef CONFIG_USB_STORAGE_SIERRA #include "sierra_ms.h" -#endif /* Some informational data */ MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>"); |