summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/core/devio.c10
-rw-r--r--drivers/usb/dwc3/dwc3-exynos.c2
-rw-r--r--drivers/usb/dwc3/dwc3-pci.c2
-rw-r--r--drivers/usb/dwc3/gadget.c16
-rw-r--r--drivers/usb/host/ehci-sched.c9
-rw-r--r--drivers/usb/host/xhci-mem.c10
-rw-r--r--drivers/usb/host/xhci-pci.c8
-rw-r--r--drivers/usb/host/xhci.c16
-rw-r--r--drivers/usb/host/xhci.h3
-rw-r--r--drivers/usb/musb/musb_host.c18
-rw-r--r--drivers/usb/musb/musb_host.h1
-rw-r--r--drivers/usb/serial/ark3116.c2
-rw-r--r--drivers/usb/serial/cypress_m8.c18
-rw-r--r--drivers/usb/serial/cypress_m8.h4
-rw-r--r--drivers/usb/serial/iuu_phoenix.c4
-rw-r--r--drivers/usb/serial/keyspan.c10
-rw-r--r--drivers/usb/serial/mos7720.c25
-rw-r--r--drivers/usb/serial/mos7840.c35
-rw-r--r--drivers/usb/serial/option.c26
-rw-r--r--drivers/usb/serial/qcserial.c1
-rw-r--r--drivers/usb/serial/usb-serial.c4
-rw-r--r--drivers/usb/serial/visor.c9
-rw-r--r--drivers/usb/serial/whiteheat.c2
-rw-r--r--drivers/usb/serial/zte_ev.c58
24 files changed, 187 insertions, 106 deletions
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index caefc800f298..c88c4fb9459d 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1287,9 +1287,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
goto error;
}
for (totlen = u = 0; u < uurb->number_of_packets; u++) {
- /* arbitrary limit,
- * sufficient for USB 2.0 high-bandwidth iso */
- if (isopkt[u].length > 8192) {
+ /*
+ * arbitrary limit need for USB 3.0
+ * bMaxBurst (0~15 allowed, 1~16 packets)
+ * bmAttributes (bit 1:0, mult 0~2, 1~3 packets)
+ * sizemax: 1024 * 16 * 3 = 49152
+ */
+ if (isopkt[u].length > 49152) {
ret = -EINVAL;
goto error;
}
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index 929e7dd6e58b..8ce9d7fd6cfc 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -164,9 +164,9 @@ static int dwc3_exynos_remove(struct platform_device *pdev)
{
struct dwc3_exynos *exynos = platform_get_drvdata(pdev);
+ device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child);
platform_device_unregister(exynos->usb2_phy);
platform_device_unregister(exynos->usb3_phy);
- device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child);
clk_disable_unprepare(exynos->clk);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 227d4a7acad7..eba9e2baf32b 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -196,9 +196,9 @@ static void dwc3_pci_remove(struct pci_dev *pci)
{
struct dwc3_pci *glue = pci_get_drvdata(pci);
+ platform_device_unregister(glue->dwc3);
platform_device_unregister(glue->usb2_phy);
platform_device_unregister(glue->usb3_phy);
- platform_device_unregister(glue->dwc3);
pci_set_drvdata(pci, NULL);
pci_disable_device(pci);
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2b6e7e001207..b5e5b35df49c 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1706,11 +1706,19 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
dep = dwc->eps[epnum];
if (!dep)
continue;
-
- dwc3_free_trb_pool(dep);
-
- if (epnum != 0 && epnum != 1)
+ /*
+ * Physical endpoints 0 and 1 are special; they form the
+ * bi-directional USB endpoint 0.
+ *
+ * For those two physical endpoints, we don't allocate a TRB
+ * pool nor do we add them the endpoints list. Due to that, we
+ * shouldn't do these two operations otherwise we would end up
+ * with all sorts of bugs when removing dwc3.ko.
+ */
+ if (epnum != 0 && epnum != 1) {
+ dwc3_free_trb_pool(dep);
list_del(&dep->endpoint.ep_list);
+ }
kfree(dep);
}
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index acff5b8f6e89..f80d0330d548 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask)
}
static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
/* carryover low/fullspeed bandwidth that crosses uframe boundries */
static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
@@ -646,6 +646,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
/* reschedule QH iff another request is queued */
if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
rc = qh_schedule(ehci, qh);
+ if (rc == 0) {
+ qh_refresh(ehci, qh);
+ qh_link_periodic(ehci, qh);
+ }
/* An error here likely indicates handshake failure
* or no space left in the schedule. Neither fault
@@ -653,9 +657,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
*
* FIXME kill the now-dysfunctional queued urbs
*/
- if (rc != 0)
+ else {
ehci_err(ehci, "can't reschedule qh %p, err %d\n",
qh, rc);
+ }
}
/* maybe turn off periodic schedule */
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 2cfc465925bd..fbf75e57628b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1827,6 +1827,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
spin_unlock_irqrestore(&xhci->lock, flags);
+ if (!xhci->rh_bw)
+ goto no_bw;
+
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
for (i = 0; i < num_ports; i++) {
struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
@@ -1845,6 +1848,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
}
+no_bw:
xhci->num_usb2_ports = 0;
xhci->num_usb3_ports = 0;
xhci->num_active_eps = 0;
@@ -2256,6 +2260,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
u32 page_size, temp;
int i;
+ INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+ INIT_LIST_HEAD(&xhci->cancel_cmd_list);
+
page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
for (i = 0; i < 16; i++) {
@@ -2334,7 +2341,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
if (!xhci->cmd_ring)
goto fail;
- INIT_LIST_HEAD(&xhci->cancel_cmd_list);
xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
(unsigned long long)xhci->cmd_ring->first_seg->dma);
@@ -2445,8 +2451,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
if (xhci_setup_port_arrays(xhci, flags))
goto fail;
- INIT_LIST_HEAD(&xhci->lpm_failed_devs);
-
/* Enable USB 3.0 device notifications for function remote wake, which
* is necessary for allowing USB 3.0 devices to do remote wakeup from
* U3 (device suspend).
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1a30c380043c..cc24e39b97d5 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -221,6 +221,14 @@ static void xhci_pci_remove(struct pci_dev *dev)
static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ /*
+ * Systems with the TI redriver that loses port status change events
+ * need to have the registers polled during D3, so avoid D3cold.
+ */
+ if (xhci_compliance_mode_recovery_timer_quirk_check())
+ pdev->no_d3cold = true;
return xhci_suspend(xhci);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b4aa79d154b2..d8f640b12dd9 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -466,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
* Systems:
* Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
*/
-static bool compliance_mode_recovery_timer_quirk_check(void)
+bool xhci_compliance_mode_recovery_timer_quirk_check(void)
{
const char *dmi_product_name, *dmi_sys_vendor;
@@ -517,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd)
xhci_dbg(xhci, "Finished xhci_init\n");
/* Initializing Compliance Mode Recovery Data If Needed */
- if (compliance_mode_recovery_timer_quirk_check()) {
+ if (xhci_compliance_mode_recovery_timer_quirk_check()) {
xhci->quirks |= XHCI_COMP_MODE_QUIRK;
compliance_mode_recovery_timer_init(xhci);
}
@@ -956,6 +956,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct usb_hcd *secondary_hcd;
int retval = 0;
+ bool comp_timer_running = false;
/* Wait a bit if either of the roothubs need to settle from the
* transition into bus suspend.
@@ -993,6 +994,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
/* If restore operation fails, re-initialize the HC during resume */
if ((temp & STS_SRE) || hibernated) {
+
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ !(xhci_all_ports_seen_u0(xhci))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n");
+ }
+
/* Let the USB core know _both_ roothubs lost power. */
usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
@@ -1035,6 +1043,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
retval = xhci_init(hcd->primary_hcd);
if (retval)
return retval;
+ comp_timer_running = true;
+
xhci_dbg(xhci, "Start the primary HCD\n");
retval = xhci_run(hcd->primary_hcd);
if (!retval) {
@@ -1076,7 +1086,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
* to suffer the Compliance Mode issue again. It doesn't matter if
* ports have entered previously to U0 before system's suspension.
*/
- if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
compliance_mode_recovery_timer_init(xhci);
/* Re-enable port polling. */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 29c978e37135..77600cefcaf1 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1853,4 +1853,7 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+/* xHCI quirks */
+bool xhci_compliance_mode_recovery_timer_quirk_check(void);
+
#endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 8914dec49f01..9d3044bdebe5 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1232,7 +1232,6 @@ void musb_host_tx(struct musb *musb, u8 epnum)
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
bool transfer_pending = false;
- static bool use_sg;
musb_ep_select(mbase, epnum);
tx_csr = musb_readw(epio, MUSB_TXCSR);
@@ -1463,9 +1462,9 @@ done:
* NULL.
*/
if (!urb->transfer_buffer)
- use_sg = true;
+ qh->use_sg = true;
- if (use_sg) {
+ if (qh->use_sg) {
/* sg_miter_start is already done in musb_ep_program */
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller, "error: sg list empty\n");
@@ -1484,9 +1483,9 @@ done:
qh->segsize = length;
- if (use_sg) {
+ if (qh->use_sg) {
if (offset + length >= urb->transfer_buffer_length)
- use_sg = false;
+ qh->use_sg = false;
}
musb_ep_select(mbase, epnum);
@@ -1552,7 +1551,6 @@ void musb_host_rx(struct musb *musb, u8 epnum)
bool done = false;
u32 status;
struct dma_channel *dma;
- static bool use_sg;
unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG;
musb_ep_select(mbase, epnum);
@@ -1878,12 +1876,12 @@ void musb_host_rx(struct musb *musb, u8 epnum)
* NULL.
*/
if (!urb->transfer_buffer) {
- use_sg = true;
+ qh->use_sg = true;
sg_miter_start(&qh->sg_miter, urb->sg, 1,
sg_flags);
}
- if (use_sg) {
+ if (qh->use_sg) {
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller, "error: sg list empty\n");
sg_miter_stop(&qh->sg_miter);
@@ -1913,8 +1911,8 @@ finish:
urb->actual_length += xfer_len;
qh->offset += xfer_len;
if (done) {
- if (use_sg)
- use_sg = false;
+ if (qh->use_sg)
+ qh->use_sg = false;
if (urb->status == -EINPROGRESS)
urb->status = status;
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 5a9c8feec10c..738f7eb60df9 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -74,6 +74,7 @@ struct musb_qh {
u16 frame; /* for periodic schedule */
unsigned iso_idx; /* in urb->iso_frame_desc[] */
struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */
+ bool use_sg; /* to track urb using sglist */
};
/* map from control or bulk queue head to the first qh on that ring */
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 3b16118cbf62..40e7fd94646f 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -43,7 +43,7 @@
#define DRIVER_NAME "ark3116"
/* usb timeout of 1 second */
-#define ARK_TIMEOUT (1*HZ)
+#define ARK_TIMEOUT 1000
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x6547, 0x0232) },
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index d341555d37d8..082120198f87 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -65,6 +65,7 @@ static const struct usb_device_id id_table_earthmate[] = {
static const struct usb_device_id id_table_cyphidcomrs232[] = {
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ } /* Terminating entry */
};
@@ -78,6 +79,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
{ } /* Terminating entry */
};
@@ -229,6 +231,12 @@ static struct usb_serial_driver * const serial_drivers[] = {
* Cypress serial helper functions
*****************************************************************************/
+/* FRWD Dongle hidcom needs to skip reset and speed checks */
+static inline bool is_frwd(struct usb_device *dev)
+{
+ return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
+ (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
+}
static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
{
@@ -238,6 +246,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
if (unstable_bauds)
return new_rate;
+ /* FRWD Dongle uses 115200 bps */
+ if (is_frwd(port->serial->dev))
+ return new_rate;
+
/*
* The general purpose firmware for the Cypress M8 allows for
* a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -448,7 +460,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port)
return -ENOMEM;
}
- usb_reset_configuration(serial->dev);
+ /* Skip reset for FRWD device. It is a workaound:
+ device hangs if it receives SET_CONFIGURE in Configured
+ state. */
+ if (!is_frwd(serial->dev))
+ usb_reset_configuration(serial->dev);
priv->cmd_ctrl = 0;
priv->line_control = 0;
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 67cf60826884..b461311a2ae7 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -24,6 +24,10 @@
#define VENDOR_ID_CYPRESS 0x04b4
#define PRODUCT_ID_CYPHIDCOM 0x5500
+/* FRWD Dongle - a GPS sports watch */
+#define VENDOR_ID_FRWD 0x6737
+#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001
+
/* Powercom UPS, chip CY7C63723 */
#define VENDOR_ID_POWERCOM 0x0d9f
#define PRODUCT_ID_UPS 0x0002
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 9d74c278b7b5..790673e5faa7 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -287,7 +287,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
usb_bulk_msg(serial->dev,
usb_sndbulkpipe(serial->dev,
port->bulk_out_endpointAddress), buf,
- count, &actual, HZ * 1);
+ count, &actual, 1000);
if (status != IUU_OPERATION_OK)
dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
@@ -307,7 +307,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
usb_bulk_msg(serial->dev,
usb_rcvbulkpipe(serial->dev,
port->bulk_in_endpointAddress), buf,
- count, &actual, HZ * 1);
+ count, &actual, 1000);
if (status != IUU_OPERATION_OK)
dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index eb30d7b01f36..3549d073df22 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1548,7 +1548,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
struct keyspan_serial_private *s_priv;
struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
- int outcont_urb;
struct urb *this_urb;
int device_port, err;
@@ -1559,7 +1558,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
d_details = s_priv->device_details;
device_port = port->number - port->serial->minor;
- outcont_urb = d_details->outcont_endpoints[port->number];
this_urb = p_priv->outcont_urb;
dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe));
@@ -1685,14 +1683,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
-#if 0
- else {
- dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__
- outcont_urb, this_urb->transfer_buffer_length,
- usb_pipeendpoint(this_urb->pipe));
- }
-#endif
-
return 0;
}
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index cc0e54345df9..f27c621a9297 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -40,7 +40,7 @@
#define DRIVER_DESC "Moschip USB Serial Driver"
/* default urb timeout */
-#define MOS_WDR_TIMEOUT (HZ * 5)
+#define MOS_WDR_TIMEOUT 5000
#define MOS_MAX_PORT 0x02
#define MOS_WRITE 0x0E
@@ -227,11 +227,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
__u8 requesttype = (__u8)0xc0;
__u16 index = get_reg_index(reg);
__u16 value = get_reg_value(reg, serial_portnum);
- int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
- index, data, 1, MOS_WDR_TIMEOUT);
- if (status < 0)
+ u8 *buf;
+ int status;
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+ index, buf, 1, MOS_WDR_TIMEOUT);
+ if (status == 1)
+ *data = *buf;
+ else if (status < 0)
dev_err(&usbdev->dev,
"mos7720: usb_control_msg() failed: %d", status);
+ kfree(buf);
+
return status;
}
@@ -1618,7 +1629,7 @@ static void change_port_settings(struct tty_struct *tty,
mos7720_port->shadowMCR |= (UART_MCR_XONANY);
/* To set hardware flow control to the specified *
* serial port, in SP1/2_CONTROL_REG */
- if (port->number)
+ if (port_number)
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
else
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
@@ -1927,7 +1938,7 @@ static int mos7720_startup(struct usb_serial *serial)
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
+ (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
/* start the interrupt urb */
ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
@@ -1970,7 +1981,7 @@ static void mos7720_release(struct usb_serial *serial)
/* wait for synchronous usb calls to return */
if (mos_parport->msg_pending)
wait_for_completion_timeout(&mos_parport->syncmsg_compl,
- MOS_WDR_TIMEOUT);
+ msecs_to_jiffies(MOS_WDR_TIMEOUT));
parport_remove_port(mos_parport->pp);
usb_set_serial_data(serial, NULL);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index a0d5ea545982..7e998081e1cd 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2142,13 +2142,21 @@ static int mos7840_ioctl(struct tty_struct *tty,
static int mos7810_check(struct usb_serial *serial)
{
int i, pass_count = 0;
+ u8 *buf;
__u16 data = 0, mcr_data = 0;
__u16 test_pattern = 0x55AA;
+ int res;
+
+ buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+ if (!buf)
+ return 0; /* failed to identify 7810 */
/* Store MCR setting */
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER,
- &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ if (res == VENDOR_READ_LENGTH)
+ mcr_data = *buf;
for (i = 0; i < 16; i++) {
/* Send the 1-bit test pattern out to MCS7810 test pin */
@@ -2158,9 +2166,12 @@ static int mos7810_check(struct usb_serial *serial)
MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
/* Read the test pattern back */
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
- VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ res = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ,
+ MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+ VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ if (res == VENDOR_READ_LENGTH)
+ data = *buf;
/* If this is a MCS7810 device, both test patterns must match */
if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001)
@@ -2174,6 +2185,8 @@ static int mos7810_check(struct usb_serial *serial)
MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
0, MOS_WDR_TIMEOUT);
+ kfree(buf);
+
if (pass_count == 16)
return 1;
@@ -2183,11 +2196,17 @@ static int mos7810_check(struct usb_serial *serial)
static int mos7840_calc_num_ports(struct usb_serial *serial)
{
__u16 data = 0x00;
+ u8 *buf;
int mos7840_num_ports;
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
- VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+ if (buf) {
+ usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+ VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ data = *buf;
+ kfree(buf);
+ }
if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 93d02bc4eb52..bd4323ddae1a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -250,13 +250,7 @@ static void option_instat_callback(struct urb *urb);
#define ZTE_PRODUCT_MF622 0x0001
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
-#define ZTE_PRODUCT_CDMA_TECH 0xfffe
-#define ZTE_PRODUCT_AC8710 0xfff1
-#define ZTE_PRODUCT_AC2726 0xfff5
-#define ZTE_PRODUCT_AC8710T 0xffff
#define ZTE_PRODUCT_MC2718 0xffe8
-#define ZTE_PRODUCT_AD3812 0xffeb
-#define ZTE_PRODUCT_MC2716 0xffed
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
@@ -495,18 +489,10 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = {
.reserved = BIT(4),
};
-static const struct option_blacklist_info zte_ad3812_z_blacklist = {
- .sendsetup = BIT(0) | BIT(1) | BIT(2),
-};
-
static const struct option_blacklist_info zte_mc2718_z_blacklist = {
.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
};
-static const struct option_blacklist_info zte_mc2716_z_blacklist = {
- .sendsetup = BIT(1) | BIT(2) | BIT(3),
-};
-
static const struct option_blacklist_info huawei_cdc12_blacklist = {
.reserved = BIT(1) | BIT(2),
};
@@ -593,6 +579,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */
+ .driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
@@ -797,7 +785,6 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
- { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
@@ -1199,16 +1186,9 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+ /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
- .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
- .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 59b32b782126..bd794b43898c 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = {
{USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */
{USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */
{USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */
+ {USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */
/* non Gobi Qualcomm serial devices */
{USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)}, /* Sierra Wireless MC7700 Device Management */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4753c005cfb6..5f6b1ff9d29e 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -408,7 +408,7 @@ static int serial_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
- int retval = -ENODEV;
+ int retval = -ENOIOCTLCMD;
dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd);
@@ -420,8 +420,6 @@ static int serial_ioctl(struct tty_struct *tty,
default:
if (port->serial->type->ioctl)
retval = port->serial->type->ioctl(tty, cmd, arg);
- else
- retval = -ENOIOCTLCMD;
}
return retval;
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 7573ec8a084f..9910aa2edf4b 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -560,10 +560,19 @@ static int treo_attach(struct usb_serial *serial)
*/
#define COPY_PORT(dest, src) \
do { \
+ int i; \
+ \
+ for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \
+ dest->read_urbs[i] = src->read_urbs[i]; \
+ dest->read_urbs[i]->context = dest; \
+ dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \
+ } \
dest->read_urb = src->read_urb; \
dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
dest->bulk_in_buffer = src->bulk_in_buffer; \
+ dest->bulk_in_size = src->bulk_in_size; \
dest->interrupt_in_urb = src->interrupt_in_urb; \
+ dest->interrupt_in_urb->context = dest; \
dest->interrupt_in_endpointAddress = \
src->interrupt_in_endpointAddress;\
dest->interrupt_in_buffer = src->interrupt_in_buffer; \
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index b9fca3586d74..347caad47a12 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_struct *tty)
struct whiteheat_port_settings port_settings;
unsigned int cflag = tty->termios.c_cflag;
- port_settings.port = port->number + 1;
+ port_settings.port = port->number - port->serial->minor + 1;
/* get the byte size */
switch (cflag & CSIZE) {
diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index 39ee7373b4ee..fca4c752a4ed 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -41,9 +41,6 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
int len;
unsigned char *buf;
- if (port->number != 0)
- return -ENODEV;
-
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -53,7 +50,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0001, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st cmd and recieve data */
@@ -65,7 +62,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 3 cmd */
@@ -84,7 +81,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4 cmd */
@@ -95,7 +92,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 5 cmd */
@@ -107,7 +104,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 6 cmd */
@@ -126,7 +123,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
kfree(buf);
@@ -166,9 +163,6 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
int len;
unsigned char *buf;
- if (port->number != 0)
- return;
-
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return;
@@ -178,7 +172,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0002, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */
@@ -186,7 +180,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 3st cmd and recieve data */
@@ -198,7 +192,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4 cmd */
@@ -217,7 +211,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 5 cmd */
@@ -228,7 +222,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 6 cmd */
@@ -240,7 +234,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 7 cmd */
@@ -259,7 +253,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 8 cmd */
@@ -270,7 +264,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
kfree(buf);
@@ -279,11 +273,29 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
}
static const struct usb_device_id id_table[] = {
- { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */
- { USB_DEVICE(0x19d2, 0xfffe) },
- { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */
+ /* AC8710, AC8710T */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) },
+ /* AC8700 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) },
+ /* MG880 */
+ { USB_DEVICE(0x19d2, 0xfffd) },
+ { USB_DEVICE(0x19d2, 0xfffc) },
+ { USB_DEVICE(0x19d2, 0xfffb) },
+ /* AC2726, AC8710_V3 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(0x19d2, 0xfff6) },
+ { USB_DEVICE(0x19d2, 0xfff7) },
+ { USB_DEVICE(0x19d2, 0xfff8) },
+ { USB_DEVICE(0x19d2, 0xfff9) },
+ { USB_DEVICE(0x19d2, 0xffee) },
+ /* AC2716, MC2716 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) },
+ /* AD3812 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(0x19d2, 0xffec) },
{ USB_DEVICE(0x05C6, 0x3197) },
{ USB_DEVICE(0x05C6, 0x6000) },
+ { USB_DEVICE(0x05C6, 0x9008) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 13:57:48 +0100