1 files changed, 14 insertions, 12 deletions

diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 98352af39325..097d668c4fe5 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -62,9 +62,9 @@ static void radeon_pm_disable_dynamic_mode(struct radeonfb_info *rinfo)
                 OUTPLL(pllSCLK_CNTL, tmp);
 		return;
 	}
-	/* RV350 (M10) */
+	/* RV350 (M10/M11) */
 	if (rinfo->family == CHIP_FAMILY_RV350) {
-                /* for RV350/M10, no delays are required. */
+                /* for RV350/M10/M11, no delays are required. */
                 tmp = INPLL(pllSCLK_CNTL2);
                 tmp |= (SCLK_CNTL2__R300_FORCE_TCL |
                         SCLK_CNTL2__R300_FORCE_GA  |
@@ -248,7 +248,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo)
 		return;
 	}
 
-	/* M10 */
+	/* M10/M11 */
 	if (rinfo->family == CHIP_FAMILY_RV350) {
 		tmp = INPLL(pllSCLK_CNTL2);
 		tmp &= ~(SCLK_CNTL2__R300_FORCE_TCL |
@@ -1155,7 +1155,7 @@ static void radeon_pm_full_reset_sdram(struct radeonfb_info *rinfo)
 	OUTREG( CRTC_GEN_CNTL,  (crtcGenCntl | CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B) );
 	OUTREG( CRTC2_GEN_CNTL, (crtcGenCntl2 | CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B) );
   
-	/* This is the code for the Aluminium PowerBooks M10 */
+	/* This is the code for the Aluminium PowerBooks M10 / iBooks M11 */
 	if (rinfo->family == CHIP_FAMILY_RV350) {
 		u32 sdram_mode_reg = rinfo->save_regs[35];
 		static u32 default_mrtable[] =
@@ -2526,18 +2526,18 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
         struct radeonfb_info *rinfo = info->par;
 	int i;
 
-	if (state == pdev->dev.power.power_state)
+	if (state.event == pdev->dev.power.power_state.event)
 		return 0;
 
 	printk(KERN_DEBUG "radeonfb (%s): suspending to state: %d...\n",
-	       pci_name(pdev), state);
+	       pci_name(pdev), state.event);
 
 	/* For suspend-to-disk, we cheat here. We don't suspend anything and
 	 * let fbcon continue drawing until we are all set. That shouldn't
 	 * really cause any problem at this point, provided that the wakeup
 	 * code knows that any state in memory may not match the HW
 	 */
-	if (state != PM_SUSPEND_MEM)
+	if (state.event == PM_EVENT_FREEZE)
 		goto done;
 
 	acquire_console_sem();
@@ -2616,7 +2616,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
         struct radeonfb_info *rinfo = info->par;
 	int rc = 0;
 
-	if (pdev->dev.power.power_state == 0)
+	if (pdev->dev.power.power_state.event == PM_EVENT_ON)
 		return 0;
 
 	if (rinfo->no_schedule) {
@@ -2626,7 +2626,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
 		acquire_console_sem();
 
 	printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
-	       pci_name(pdev), pdev->dev.power.power_state);
+	       pci_name(pdev), pdev->dev.power.power_state.event);
 
 
 	if (pci_enable_device(pdev)) {
@@ -2637,7 +2637,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
 	}
 	pci_set_master(pdev);
 
-	if (pdev->dev.power.power_state == PM_SUSPEND_MEM) {
+	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
 		/* Wakeup chip. Check from config space if we were powered off
 		 * (todo: additionally, check CLK_PIN_CNTL too)
 		 */
@@ -2741,9 +2741,11 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk)
 			rinfo->pm_mode |= radeon_pm_d2;
 
 		/* We can restart Jasper (M10 chip in albooks), BlueStone (7500 chip
-		 * in some desktop G4s), and Via (M9+ chip on iBook G4)
+		 * in some desktop G4s), Via (M9+ chip on iBook G4) and
+		 * Snowy (M11 chip on iBook G4 manufactured after July 2005)
 		 */
-		if (!strcmp(rinfo->of_node->name, "ATY,JasperParent")) {
+		if (!strcmp(rinfo->of_node->name, "ATY,JasperParent") ||
+		    !strcmp(rinfo->of_node->name, "ATY,SnowyParent")) {
 			rinfo->reinit_func = radeon_reinitialize_M10;
 			rinfo->pm_mode |= radeon_pm_off;
 		}