diff options
Diffstat (limited to 'drivers/video/backlight')
| -rw-r--r-- | drivers/video/backlight/Kconfig | 45 | ||||
| -rw-r--r-- | drivers/video/backlight/Makefile | 8 | ||||
| -rw-r--r-- | drivers/video/backlight/atmel-pwm-bl.c | 244 | ||||
| -rw-r--r-- | drivers/video/backlight/backlight.c | 1 | ||||
| -rw-r--r-- | drivers/video/backlight/hp680_bl.c | 2 | ||||
| -rw-r--r-- | drivers/video/backlight/ili9320.c | 330 | ||||
| -rw-r--r-- | drivers/video/backlight/ili9320.h | 80 | ||||
| -rw-r--r-- | drivers/video/backlight/lcd.c | 2 | ||||
| -rw-r--r-- | drivers/video/backlight/mbp_nvidia_bl.c | 116 | ||||
| -rw-r--r-- | drivers/video/backlight/omap1_bl.c | 6 | ||||
| -rw-r--r-- | drivers/video/backlight/platform_lcd.c | 174 | ||||
| -rw-r--r-- | drivers/video/backlight/pwm_bl.c | 10 | ||||
| -rw-r--r-- | drivers/video/backlight/vgg2432a4.c | 284 |
13 files changed, 1294 insertions, 8 deletions
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 30bf7f2f1635..452b770d8cc9 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -36,6 +36,30 @@ config LCD_LTV350QV The LTV350QV panel is present on all ATSTK1000 boards. +config LCD_ILI9320 + tristate + depends on LCD_CLASS_DEVICE && BACKLIGHT_LCD_SUPPORT + default n + help + If you have a panel based on the ILI9320 controller chip + then say y to include a power driver for it. + +config LCD_VGG2432A4 + tristate "VGG2432A4 LCM device support" + depends on BACKLIGHT_LCD_SUPPORT && LCD_CLASS_DEVICE && SPI_MASTER + select LCD_ILI9320 + default n + help + If you have a VGG2432A4 panel based on the ILI9320 controller chip + then say y to include a power driver for it. + +config LCD_PLATFORM + tristate "Platform LCD controls" + depends on LCD_CLASS_DEVICE + help + This driver provides a platform-device registered LCD power + control interface. + # # Backlight # @@ -63,6 +87,18 @@ config BACKLIGHT_ATMEL_LCDC If in doubt, it's safe to enable this option; it doesn't kick in unless the board's description says it's wired that way. +config BACKLIGHT_ATMEL_PWM + tristate "Atmel PWM backlight control" + depends on BACKLIGHT_CLASS_DEVICE && ATMEL_PWM + default n + help + Say Y here if you want to use the PWM peripheral in Atmel AT91 and + AVR32 devices. This driver will need additional platform data to know + which PWM instance to use and how to configure it. + + To compile this driver as a module, choose M here: the module will be + called atmel-pwm-bl. + config BACKLIGHT_CORGI tristate "Generic (aka Sharp Corgi) Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE @@ -119,3 +155,12 @@ config BACKLIGHT_PWM help If you have a LCD backlight adjustable by PWM, say Y to enable this driver. + +config BACKLIGHT_MBP_NVIDIA + tristate "MacBook Pro Nvidia Backlight Driver" + depends on BACKLIGHT_CLASS_DEVICE && X86 + default n + help + If you have an Apple Macbook Pro with Nvidia graphics hardware say Y + to enable a driver for its backlight + diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index b51a7cd12500..b405aace803f 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -1,9 +1,13 @@ # Backlight & LCD drivers obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o -obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o +obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o +obj-$(CONFIG_LCD_ILI9320) += ili9320.o +obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o +obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o +obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o @@ -11,3 +15,5 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o +obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o + diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c new file mode 100644 index 000000000000..505c0823a105 --- /dev/null +++ b/drivers/video/backlight/atmel-pwm-bl.c @@ -0,0 +1,244 @@ +/* + * Copyright (C) 2008 Atmel Corporation + * + * Backlight driver using Atmel PWM peripheral. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/clk.h> +#include <linux/gpio.h> +#include <linux/backlight.h> +#include <linux/atmel_pwm.h> +#include <linux/atmel-pwm-bl.h> + +struct atmel_pwm_bl { + const struct atmel_pwm_bl_platform_data *pdata; + struct backlight_device *bldev; + struct platform_device *pdev; + struct pwm_channel pwmc; + int gpio_on; +}; + +static int atmel_pwm_bl_set_intensity(struct backlight_device *bd) +{ + struct atmel_pwm_bl *pwmbl = bl_get_data(bd); + int intensity = bd->props.brightness; + int pwm_duty; + + if (bd->props.power != FB_BLANK_UNBLANK) + intensity = 0; + if (bd->props.fb_blank != FB_BLANK_UNBLANK) + intensity = 0; + + if (pwmbl->pdata->pwm_active_low) + pwm_duty = pwmbl->pdata->pwm_duty_min + intensity; + else + pwm_duty = pwmbl->pdata->pwm_duty_max - intensity; + + if (pwm_duty > pwmbl->pdata->pwm_duty_max) + pwm_duty = pwmbl->pdata->pwm_duty_max; + if (pwm_duty < pwmbl->pdata->pwm_duty_min) + pwm_duty = pwmbl->pdata->pwm_duty_min; + + if (!intensity) { + if (pwmbl->gpio_on != -1) { + gpio_set_value(pwmbl->gpio_on, + 0 ^ pwmbl->pdata->on_active_low); + } + pwm_channel_writel(&pwmbl->pwmc, PWM_CUPD, pwm_duty); + pwm_channel_disable(&pwmbl->pwmc); + } else { + pwm_channel_enable(&pwmbl->pwmc); + pwm_channel_writel(&pwmbl->pwmc, PWM_CUPD, pwm_duty); + if (pwmbl->gpio_on != -1) { + gpio_set_value(pwmbl->gpio_on, + 1 ^ pwmbl->pdata->on_active_low); + } + } + + return 0; +} + +static int atmel_pwm_bl_get_intensity(struct backlight_device *bd) +{ + struct atmel_pwm_bl *pwmbl = bl_get_data(bd); + u8 intensity; + + if (pwmbl->pdata->pwm_active_low) { + intensity = pwm_channel_readl(&pwmbl->pwmc, PWM_CDTY) - + pwmbl->pdata->pwm_duty_min; + } else { + intensity = pwmbl->pdata->pwm_duty_max - + pwm_channel_readl(&pwmbl->pwmc, PWM_CDTY); + } + + return intensity; +} + +static int atmel_pwm_bl_init_pwm(struct atmel_pwm_bl *pwmbl) +{ + unsigned long pwm_rate = pwmbl->pwmc.mck; + unsigned long prescale = DIV_ROUND_UP(pwm_rate, + (pwmbl->pdata->pwm_frequency * + pwmbl->pdata->pwm_compare_max)) - 1; + + /* + * Prescale must be power of two and maximum 0xf in size because of + * hardware limit. PWM speed will be: + * PWM module clock speed / (2 ^ prescale). + */ + prescale = fls(prescale); + if (prescale > 0xf) + prescale = 0xf; + + pwm_channel_writel(&pwmbl->pwmc, PWM_CMR, prescale); + pwm_channel_writel(&pwmbl->pwmc, PWM_CDTY, + pwmbl->pdata->pwm_duty_min + + pwmbl->bldev->props.brightness); + pwm_channel_writel(&pwmbl->pwmc, PWM_CPRD, + pwmbl->pdata->pwm_compare_max); + + dev_info(&pwmbl->pdev->dev, "Atmel PWM backlight driver " + "(%lu Hz)\n", pwmbl->pwmc.mck / + pwmbl->pdata->pwm_compare_max / + (1 << prescale)); + + return pwm_channel_enable(&pwmbl->pwmc); +} + +static struct backlight_ops atmel_pwm_bl_ops = { + .get_brightness = atmel_pwm_bl_get_intensity, + .update_status = atmel_pwm_bl_set_intensity, +}; + +static int atmel_pwm_bl_probe(struct platform_device *pdev) +{ + const struct atmel_pwm_bl_platform_data *pdata; + struct backlight_device *bldev; + struct atmel_pwm_bl *pwmbl; + int retval; + + pwmbl = kzalloc(sizeof(struct atmel_pwm_bl), GFP_KERNEL); + if (!pwmbl) + return -ENOMEM; + + pwmbl->pdev = pdev; + + pdata = pdev->dev.platform_data; + if (!pdata) { + retval = -ENODEV; + goto err_free_mem; + } + + if (pdata->pwm_compare_max < pdata->pwm_duty_max || + pdata->pwm_duty_min > pdata->pwm_duty_max || + pdata->pwm_frequency == 0) { + retval = -EINVAL; + goto err_free_mem; + } + + pwmbl->pdata = pdata; + pwmbl->gpio_on = pdata->gpio_on; + + retval = pwm_channel_alloc(pdata->pwm_channel, &pwmbl->pwmc); + if (retval) + goto err_free_mem; + + if (pwmbl->gpio_on != -1) { + retval = gpio_request(pwmbl->gpio_on, "gpio_atmel_pwm_bl"); + if (retval) { + pwmbl->gpio_on = -1; + goto err_free_pwm; + } + + /* Turn display off by defatult. */ + retval = gpio_direction_output(pwmbl->gpio_on, + 0 ^ pdata->on_active_low); + if (retval) + goto err_free_gpio; + } + + bldev = backlight_device_register("atmel-pwm-bl", + &pdev->dev, pwmbl, &atmel_pwm_bl_ops); + if (IS_ERR(bldev)) { + retval = PTR_ERR(bldev); + goto err_free_gpio; + } + + pwmbl->bldev = bldev; + + platform_set_drvdata(pdev, pwmbl); + + /* Power up the backlight by default at middle intesity. */ + bldev->props.power = FB_BLANK_UNBLANK; + bldev->props.max_brightness = pdata->pwm_duty_max - pdata->pwm_duty_min; + bldev->props.brightness = bldev->props.max_brightness / 2; + + retval = atmel_pwm_bl_init_pwm(pwmbl); + if (retval) + goto err_free_bl_dev; + + atmel_pwm_bl_set_intensity(bldev); + + return 0; + +err_free_bl_dev: + platform_set_drvdata(pdev, NULL); + backlight_device_unregister(bldev); +err_free_gpio: + if (pwmbl->gpio_on != -1) + gpio_free(pwmbl->gpio_on); +err_free_pwm: + pwm_channel_free(&pwmbl->pwmc); +err_free_mem: + kfree(pwmbl); + return retval; +} + +static int __exit atmel_pwm_bl_remove(struct platform_device *pdev) +{ + struct atmel_pwm_bl *pwmbl = platform_get_drvdata(pdev); + + if (pwmbl->gpio_on != -1) { + gpio_set_value(pwmbl->gpio_on, 0); + gpio_free(pwmbl->gpio_on); + } + pwm_channel_disable(&pwmbl->pwmc); + pwm_channel_free(&pwmbl->pwmc); + backlight_device_unregister(pwmbl->bldev); + platform_set_drvdata(pdev, NULL); + kfree(pwmbl); + + return 0; +} + +static struct platform_driver atmel_pwm_bl_driver = { + .driver = { + .name = "atmel-pwm-bl", + }, + /* REVISIT add suspend() and resume() */ + .remove = __exit_p(atmel_pwm_bl_remove), +}; + +static int __init atmel_pwm_bl_init(void) +{ + return platform_driver_probe(&atmel_pwm_bl_driver, atmel_pwm_bl_probe); +} +module_init(atmel_pwm_bl_init); + +static void __exit atmel_pwm_bl_exit(void) +{ + platform_driver_unregister(&atmel_pwm_bl_driver); +} +module_exit(atmel_pwm_bl_exit); + +MODULE_AUTHOR("Hans-Christian egtvedt <hans-christian.egtvedt@atmel.com>"); +MODULE_DESCRIPTION("Atmel PWM backlight driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index 39394757679c..fab0bc874b58 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -191,6 +191,7 @@ static struct device_attribute bl_device_attributes[] = { * backlight_device class. * @name: the name of the new object(must be the same as the name of the * respective framebuffer device). + * @parent: a pointer to the parent device * @devdata: an optional pointer to be stored for private driver use. The * methods may retrieve it by using bl_get_data(bd). * @ops: the backlight operations structure. diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c index fbea2bd129c7..6fa0b9d5559a 100644 --- a/drivers/video/backlight/hp680_bl.c +++ b/drivers/video/backlight/hp680_bl.c @@ -18,7 +18,7 @@ #include <linux/fb.h> #include <linux/backlight.h> -#include <asm/cpu/dac.h> +#include <cpu/dac.h> #include <asm/hp6xx.h> #include <asm/hd64461.h> diff --git a/drivers/video/backlight/ili9320.c b/drivers/video/backlight/ili9320.c new file mode 100644 index 000000000000..ba89b41b639c --- /dev/null +++ b/drivers/video/backlight/ili9320.c @@ -0,0 +1,330 @@ +/* drivers/video/backlight/ili9320.c + * + * ILI9320 LCD controller driver core. + * + * Copyright 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/lcd.h> +#include <linux/module.h> + +#include <linux/spi/spi.h> + +#include <video/ili9320.h> + +#include "ili9320.h" + + +static inline int ili9320_write_spi(struct ili9320 *ili, + unsigned int reg, + unsigned int value) +{ + struct ili9320_spi *spi = &ili->access.spi; + unsigned char *addr = spi->buffer_addr; + unsigned char *data = spi->buffer_data; + + /* spi message consits of: + * first byte: ID and operation + */ + + addr[0] = spi->id | ILI9320_SPI_INDEX | ILI9320_SPI_WRITE; + addr[1] = reg >> 8; + addr[2] = reg; + + /* second message is the data to transfer */ + + data[0] = spi->id | ILI9320_SPI_DATA | ILI9320_SPI_WRITE; + data[1] = value >> 8; + data[2] = value; + + return spi_sync(spi->dev, &spi->message); +} + +int ili9320_write(struct ili9320 *ili, unsigned int reg, unsigned int value) +{ + dev_dbg(ili->dev, "write: reg=%02x, val=%04x\n", reg, value); + return ili->write(ili, reg, value); +} + +EXPORT_SYMBOL_GPL(ili9320_write); + +int ili9320_write_regs(struct ili9320 *ili, + struct ili9320_reg *values, + int nr_values) +{ + int index; + int ret; + + for (index = 0; index < nr_values; index++, values++) { + ret = ili9320_write(ili, values->address, values->value); + if (ret != 0) + return ret; + } + + return 0; +} + +EXPORT_SYMBOL_GPL(ili9320_write_regs); + +static void ili9320_reset(struct ili9320 *lcd) +{ + struct ili9320_platdata *cfg = lcd->platdata; + + cfg->reset(1); + mdelay(50); + + cfg->reset(0); + mdelay(50); + + cfg->reset(1); + mdelay(100); +} + +static inline int ili9320_init_chip(struct ili9320 *lcd) +{ + int ret; + + ili9320_reset(lcd); + + ret = lcd->client->init(lcd, lcd->platdata); + if (ret != 0) { + dev_err(lcd->dev, "failed to initialise display\n"); + return ret; + } + + lcd->initialised = 1; + return 0; +} + +static inline int ili9320_power_on(struct ili9320 *lcd) +{ + if (!lcd->initialised) + ili9320_init_chip(lcd); + + lcd->display1 |= (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE); + ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1); + + return 0; +} + +static inline int ili9320_power_off(struct ili9320 *lcd) +{ + lcd->display1 &= ~(ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE); + ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1); + + return 0; +} + +#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) + +static int ili9320_power(struct ili9320 *lcd, int power) +{ + int ret = 0; + + dev_dbg(lcd->dev, "power %d => %d\n", lcd->power, power); + + if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power)) + ret = ili9320_power_on(lcd); + else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power)) + ret = ili9320_power_off(lcd); + + if (ret == 0) + lcd->power = power; + else + dev_warn(lcd->dev, "failed to set power mode %d\n", power); + + return ret; +} + +static inline struct ili9320 *to_our_lcd(struct lcd_device *lcd) +{ + return lcd_get_data(lcd); +} + +static int ili9320_set_power(struct lcd_device *ld, int power) +{ + struct ili9320 *lcd = to_our_lcd(ld); + + return ili9320_power(lcd, power); +} + +static int ili9320_get_power(struct lcd_device *ld) +{ + struct ili9320 *lcd = to_our_lcd(ld); + + return lcd->power; +} + +static struct lcd_ops ili9320_ops = { + .get_power = ili9320_get_power, + .set_power = ili9320_set_power, +}; + +static void __devinit ili9320_setup_spi(struct ili9320 *ili, + struct spi_device *dev) +{ + struct ili9320_spi *spi = &ili->access.spi; + + ili->write = ili9320_write_spi; + spi->dev = dev; + + /* fill the two messages we are going to use to send the data + * with, the first the address followed by the data. The datasheet + * says they should be done as two distinct cycles of the SPI CS line. + */ + + spi->xfer[0].tx_buf = spi->buffer_addr; + spi->xfer[1].tx_buf = spi->buffer_data; + spi->xfer[0].len = 3; + spi->xfer[1].len = 3; + spi->xfer[0].bits_per_word = 8; + spi->xfer[1].bits_per_word = 8; + spi->xfer[0].cs_change = 1; + + spi_message_init(&spi->message); + spi_message_add_tail(&spi->xfer[0], &spi->message); + spi_message_add_tail(&spi->xfer[1], &spi->message); +} + +int __devinit ili9320_probe_spi(struct spi_device *spi, + struct ili9320_client *client) +{ + struct ili9320_platdata *cfg = spi->dev.platform_data; + struct device *dev = &spi->dev; + struct ili9320 *ili; + struct lcd_device *lcd; + int ret = 0; + + /* verify we where given some information */ + + if (cfg == NULL) { + dev_err(dev, "no platform data supplied\n"); + return -EINVAL; + } + + if (cfg->hsize <= 0 || cfg->vsize <= 0 || cfg->reset == NULL) { + dev_err(dev, "invalid platform data supplied\n"); + return -EINVAL; + } + + /* allocate and initialse our state */ + + ili = kzalloc(sizeof(struct ili9320), GFP_KERNEL); + if (ili == NULL) { + dev_err(dev, "no memory for device\n"); + return -ENOMEM; + } + + ili->access.spi.id = ILI9320_SPI_IDCODE | ILI9320_SPI_ID(1); + + ili->dev = dev; + ili->client = client; + ili->power = FB_BLANK_POWERDOWN; + ili->platdata = cfg; + + dev_set_drvdata(&spi->dev, ili); + + ili9320_setup_spi(ili, spi); + + lcd = lcd_device_register("ili9320", dev, ili, &ili9320_ops); + if (IS_ERR(lcd)) { + dev_err(dev, "failed to register lcd device\n"); + ret = PTR_ERR(lcd); + goto err_free; + } + + ili->lcd = lcd; + + dev_info(dev, "initialising %s\n", client->name); + + ret = ili9320_power(ili, FB_BLANK_UNBLANK); + if (ret != 0) { + dev_err(dev, "failed to set lcd power state\n"); + goto err_unregister; + } + + return 0; + + err_unregister: + lcd_device_unregister(lcd); + + err_free: + kfree(ili); + + return ret; +} + +EXPORT_SYMBOL_GPL(ili9320_probe_spi); + +int __devexit ili9320_remove(struct ili9320 *ili) +{ + ili9320_power(ili, FB_BLANK_POWERDOWN); + + lcd_device_unregister(ili->lcd); + kfree(ili); + + return 0; +} + +EXPORT_SYMBOL_GPL(ili9320_remove); + +#ifdef CONFIG_PM +int ili9320_suspend(struct ili9320 *lcd, pm_message_t state) +{ + int ret; + + dev_dbg(lcd->dev, "%s: event %d\n", __func__, state.event); + + if (state.event == PM_EVENT_SUSPEND) { + ret = ili9320_power(lcd, FB_BLANK_POWERDOWN); + + if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) { + ili9320_write(lcd, ILI9320_POWER1, lcd->power1 | + ILI9320_POWER1_SLP | + ILI9320_POWER1_DSTB); + lcd->initialised = 0; + } + + return ret; + } + + return 0; +} + +EXPORT_SYMBOL_GPL(ili9320_suspend); + +int ili9320_resume(struct ili9320 *lcd) +{ + dev_info(lcd->dev, "resuming from power state %d\n", lcd->power); + + if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) { + ili9320_write(lcd, ILI9320_POWER1, 0x00); + } + + return ili9320_power(lcd, FB_BLANK_UNBLANK); +} + +EXPORT_SYMBOL_GPL(ili9320_resume); +#endif + +/* Power down all displays on reboot, poweroff or halt */ +void ili9320_shutdown(struct ili9320 *lcd) +{ + ili9320_power(lcd, FB_BLANK_POWERDOWN); +} + +EXPORT_SYMBOL_GPL(ili9320_shutdown); + +MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>"); +MODULE_DESCRIPTION("ILI9320 LCD Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/ili9320.h b/drivers/video/backlight/ili9320.h new file mode 100644 index 000000000000..e388eca7cac5 --- /dev/null +++ b/drivers/video/backlight/ili9320.h @@ -0,0 +1,80 @@ +/* drivers/video/backlight/ili9320.h + * + * ILI9320 LCD controller driver core. + * + * Copyright 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Holder for register and value pairs. */ +struct ili9320_reg { + unsigned short address; + unsigned short value; +}; + +struct ili9320; + +struct ili9320_client { + const char *name; + int (*init)(struct ili9320 *ili, struct ili9320_platdata *cfg); + +}; +/* Device attached via an SPI bus. */ +struct ili9320_spi { + struct spi_device *dev; + struct spi_message message; + struct spi_transfer xfer[2]; + + unsigned char id; + unsigned char buffer_addr[4]; + unsigned char buffer_data[4]; +}; + +/* ILI9320 device state. */ +struct ili9320 { + union { + struct ili9320_spi spi; /* SPI attachged device. */ + } access; /* Register access method. */ + + struct device *dev; + struct lcd_device *lcd; /* LCD device we created. */ + struct ili9320_client *client; + struct ili9320_platdata *platdata; + + int power; /* current power state. */ + int initialised; + + unsigned short display1; + unsigned short power1; + + int (*write)(struct ili9320 *ili, unsigned int reg, unsigned int val); +}; + + +/* ILI9320 register access routines */ + +extern int ili9320_write(struct ili9320 *ili, + unsigned int reg, unsigned int value); + +extern int ili9320_write_regs(struct ili9320 *ili, + struct ili9320_reg *values, + int nr_values); + +/* Device probe */ + +extern int ili9320_probe_spi(struct spi_device *spi, + struct ili9320_client *cli); + +extern int ili9320_remove(struct ili9320 *lcd); +extern void ili9320_shutdown(struct ili9320 *lcd); + +/* PM */ + +extern int ili9320_suspend(struct ili9320 *lcd, pm_message_t state); +extern int ili9320_resume(struct ili9320 *lcd); diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index 299fd318dd45..b15b2b84a6f7 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -33,7 +33,7 @@ static int fb_notifier_callback(struct notifier_block *self, ld = container_of(self, struct lcd_device, fb_notif); mutex_lock(&ld->ops_lock); if (ld->ops) - if (!ld->ops->check_fb || ld->ops->check_fb(evdata->info)) + if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) ld->ops->set_power(ld, *(int *)evdata->data); mutex_unlock(&ld->ops_lock); return 0; diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c new file mode 100644 index 000000000000..385cba40ea87 --- /dev/null +++ b/drivers/video/backlight/mbp_nvidia_bl.c @@ -0,0 +1,116 @@ +/* + * Backlight Driver for Nvidia 8600 in Macbook Pro + * + * Copyright (c) Red Hat <mjg@redhat.com> + * Based on code from Pommed: + * Copyright (C) 2006 Nicolas Boichat <nicolas @boichat.ch> + * Copyright (C) 2006 Felipe Alfaro Solana <felipe_alfaro @linuxmail.org> + * Copyright (C) 2007 Julien BLACHE <jb@jblache.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver triggers SMIs which cause the firmware to change the + * backlight brightness. This is icky in many ways, but it's impractical to + * get at the firmware code in order to figure out what it's actually doing. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/dmi.h> +#include <linux/io.h> + +static struct backlight_device *mbp_backlight_device; + +static struct dmi_system_id __initdata mbp_device_table[] = { + { + .ident = "3,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"), + }, + }, + { + .ident = "3,2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,2"), + }, + }, + { + .ident = "4,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro4,1"), + }, + }, + { } +}; + +static int mbp_send_intensity(struct backlight_device *bd) +{ + int intensity = bd->props.brightness; + + outb(0x04 | (intensity << 4), 0xb3); + outb(0xbf, 0xb2); + + return 0; +} + +static int mbp_get_intensity(struct backlight_device *bd) +{ + outb(0x03, 0xb3); + outb(0xbf, 0xb2); + return inb(0xb3) >> 4; +} + +static struct backlight_ops mbp_ops = { + .get_brightness = mbp_get_intensity, + .update_status = mbp_send_intensity, +}; + +static int __init mbp_init(void) +{ + if (!dmi_check_system(mbp_device_table)) + return -ENODEV; + + if (!request_region(0xb2, 2, "Macbook Pro backlight")) + return -ENXIO; + + mbp_backlight_device = backlight_device_register("mbp_backlight", + NULL, NULL, + &mbp_ops); + if (IS_ERR(mbp_backlight_device)) { + release_region(0xb2, 2); + return PTR_ERR(mbp_backlight_device); + } + + mbp_backlight_device->props.max_brightness = 15; + mbp_backlight_device->props.brightness = + mbp_get_intensity(mbp_backlight_device); + backlight_update_status(mbp_backlight_device); + + return 0; +} + +static void __exit mbp_exit(void) +{ + backlight_device_unregister(mbp_backlight_device); + + release_region(0xb2, 2); +} + +module_init(mbp_init); +module_exit(mbp_exit); + +MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>"); +MODULE_DESCRIPTION("Nvidia-based Macbook Pro Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("svnAppleInc.:pnMacBookPro3,1"); +MODULE_ALIAS("svnAppleInc.:pnMacBookPro3,2"); +MODULE_ALIAS("svnAppleInc.:pnMacBookPro4,1"); diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c index 891875d53a49..cbad67e89826 100644 --- a/drivers/video/backlight/omap1_bl.c +++ b/drivers/video/backlight/omap1_bl.c @@ -25,9 +25,9 @@ #include <linux/fb.h> #include <linux/backlight.h> -#include <asm/arch/hardware.h> -#include <asm/arch/board.h> -#include <asm/arch/mux.h> +#include <mach/hardware.h> +#include <mach/board.h> +#include <mach/mux.h> #define OMAPBL_MAX_INTENSITY 0xff diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c new file mode 100644 index 000000000000..738694d23889 --- /dev/null +++ b/drivers/video/backlight/platform_lcd.c @@ -0,0 +1,174 @@ +/* drivers/video/backlight/platform_lcd.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Generic platform-device LCD power control interface. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/lcd.h> + +#include <video/platform_lcd.h> + +struct platform_lcd { + struct device *us; + struct lcd_device *lcd; + struct plat_lcd_data *pdata; + + unsigned int power; + unsigned int suspended : 1; +}; + +static inline struct platform_lcd *to_our_lcd(struct lcd_device *lcd) +{ + return lcd_get_data(lcd); +} + +static int platform_lcd_get_power(struct lcd_device *lcd) +{ + struct platform_lcd *plcd = to_our_lcd(lcd); + + return plcd->power; +} + +static int platform_lcd_set_power(struct lcd_device *lcd, int power) +{ + struct platform_lcd *plcd = to_our_lcd(lcd); + int lcd_power = 1; + + if (power == FB_BLANK_POWERDOWN || plcd->suspended) + lcd_power = 0; + + plcd->pdata->set_power(plcd->pdata, lcd_power); + plcd->power = power; + + return 0; +} + +static int platform_lcd_match(struct lcd_device *lcd, struct fb_info *info) +{ + struct platform_lcd *plcd = to_our_lcd(lcd); + struct plat_lcd_data *pdata = plcd->pdata; + + if (pdata->match_fb) + return pdata->match_fb(pdata, info); + + return plcd->us->parent == info->device; +} + +static struct lcd_ops platform_lcd_ops = { + .get_power = platform_lcd_get_power, + .set_power = platform_lcd_set_power, + .check_fb = platform_lcd_match, +}; + +static int __devinit platform_lcd_probe(struct platform_device *pdev) +{ + struct plat_lcd_data *pdata; + struct platform_lcd *plcd; + struct device *dev = &pdev->dev; + int err; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(dev, "no platform data supplied\n"); + return -EINVAL; + } + + plcd = kzalloc(sizeof(struct platform_lcd), GFP_KERNEL); + if (!plcd) { + dev_err(dev, "no memory for state\n"); + return -ENOMEM; + } + + plcd->us = dev; + plcd->pdata = pdata; + plcd->lcd = lcd_device_register(dev_name(dev), dev, + plcd, &platform_lcd_ops); + if (IS_ERR(plcd->lcd)) { + dev_err(dev, "cannot register lcd device\n"); + err = PTR_ERR(plcd->lcd); + goto err_mem; + } + + platform_set_drvdata(pdev, plcd); + platform_lcd_set_power(plcd->lcd, FB_BLANK_NORMAL); + + return 0; + + err_mem: + kfree(plcd); + return err; +} + +static int __devexit platform_lcd_remove(struct platform_device *pdev) +{ + struct platform_lcd *plcd = platform_get_drvdata(pdev); + + lcd_device_unregister(plcd->lcd); + kfree(plcd); + + return 0; +} + +#ifdef CONFIG_PM +static int platform_lcd_suspend(struct platform_device *pdev, pm_message_t st) +{ + struct platform_lcd *plcd = platform_get_drvdata(pdev); + + plcd->suspended = 1; + platform_lcd_set_power(plcd->lcd, plcd->power); + + return 0; +} + +static int platform_lcd_resume(struct platform_device *pdev) +{ + struct platform_lcd *plcd = platform_get_drvdata(pdev); + + plcd->suspended = 0; + platform_lcd_set_power(plcd->lcd, plcd->power); + + return 0; +} +#else +#define platform_lcd_suspend NULL +#define platform_lcd_resume NULL +#endif + +static struct platform_driver platform_lcd_driver = { + .driver = { + .name = "platform-lcd", + .owner = THIS_MODULE, + }, + .probe = platform_lcd_probe, + .remove = __devexit_p(platform_lcd_remove), + .suspend = platform_lcd_suspend, + .resume = platform_lcd_resume, +}; + +static int __init platform_lcd_init(void) +{ + return platform_driver_register(&platform_lcd_driver); +} + +static void __exit platform_lcd_cleanup(void) +{ + platform_driver_unregister(&platform_lcd_driver); +} + +module_init(platform_lcd_init); +module_exit(platform_lcd_cleanup); + +MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:platform-lcd"); diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 6338d0e2fe07..ea07258565f0 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -68,8 +68,10 @@ static int pwm_backlight_probe(struct platform_device *pdev) struct pwm_bl_data *pb; int ret; - if (!data) + if (!data) { + dev_err(&pdev->dev, "failed to find platform data\n"); return -EINVAL; + } if (data->init) { ret = data->init(&pdev->dev); @@ -79,6 +81,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb = kzalloc(sizeof(*pb), GFP_KERNEL); if (!pb) { + dev_err(&pdev->dev, "no memory for state\n"); ret = -ENOMEM; goto err_alloc; } @@ -91,7 +94,8 @@ static int pwm_backlight_probe(struct platform_device *pdev) dev_err(&pdev->dev, "unable to request PWM for backlight\n"); ret = PTR_ERR(pb->pwm); goto err_pwm; - } + } else + dev_dbg(&pdev->dev, "got pwm for backlight\n"); bl = backlight_device_register(pdev->name, &pdev->dev, pb, &pwm_backlight_ops); @@ -183,3 +187,5 @@ module_exit(pwm_backlight_exit); MODULE_DESCRIPTION("PWM based Backlight Driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pwm-backlight"); + diff --git a/drivers/video/backlight/vgg2432a4.c b/drivers/video/backlight/vgg2432a4.c new file mode 100644 index 000000000000..593c7687d54a --- /dev/null +++ b/drivers/video/backlight/vgg2432a4.c @@ -0,0 +1,284 @@ +/* drivers/video/backlight/vgg2432a4.c + * + * VGG2432A4 (ILI9320) LCD controller driver. + * + * Copyright 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/lcd.h> +#include <linux/module.h> + +#include <linux/spi/spi.h> + +#include <video/ili9320.h> + +#include "ili9320.h" + +/* Device initialisation sequences */ + +static struct ili9320_reg vgg_init1[] = { + { + .address = ILI9320_POWER1, + .value = ILI9320_POWER1_AP(0) | ILI9320_POWER1_BT(0), + }, { + .address = ILI9320_POWER2, + .value = (ILI9320_POWER2_VC(7) | + ILI9320_POWER2_DC0(0) | ILI9320_POWER2_DC1(0)), + }, { + .address = ILI9320_POWER3, + .value = ILI9320_POWER3_VRH(0), + }, { + .address = ILI9320_POWER4, + .value = ILI9320_POWER4_VREOUT(0), + }, +}; + +static struct ili9320_reg vgg_init2[] = { + { + .address = ILI9320_POWER1, + .value = (ILI9320_POWER1_AP(3) | ILI9320_POWER1_APE | + ILI9320_POWER1_BT(7) | ILI9320_POWER1_SAP), + }, { + .address = ILI9320_POWER2, + .value = ILI9320_POWER2_VC(7) | ILI9320_POWER2_DC0(3), + } +}; + +static struct ili9320_reg vgg_gamma[] = { + { + .address = ILI9320_GAMMA1, + .value = 0x0000, + }, { + .address = ILI9320_GAMMA2, + .value = 0x0505, + }, { + .address = ILI9320_GAMMA3, + .value = 0x0004, + }, { + .address = ILI9320_GAMMA4, + .value = 0x0006, + }, { + .address = ILI9320_GAMMA5, + .value = 0x0707, + }, { + .address = ILI9320_GAMMA6, + .value = 0x0105, + }, { + .address = ILI9320_GAMMA7, + .value = 0x0002, + }, { + .address = ILI9320_GAMMA8, + .value = 0x0707, + }, { + .address = ILI9320_GAMMA9, + .value = 0x0704, + }, { + .address = ILI9320_GAMMA10, + .value = 0x807, + } + +}; + +static struct ili9320_reg vgg_init0[] = { + [0] = { + /* set direction and scan mode gate */ + .address = ILI9320_DRIVER, + .value = ILI9320_DRIVER_SS, + }, { + .address = ILI9320_DRIVEWAVE, + .value = (ILI9320_DRIVEWAVE_MUSTSET | + ILI9320_DRIVEWAVE_EOR | ILI9320_DRIVEWAVE_BC), + }, { + .address = ILI9320_ENTRYMODE, + .value = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR, + }, { + .address = ILI9320_RESIZING, + .value = 0x0, + }, +}; + + +static int vgg2432a4_lcd_init(struct ili9320 *lcd, + struct ili9320_platdata *cfg) +{ + unsigned int addr; + int ret; + + /* Set VCore before anything else (VGG243237-6UFLWA) */ + ret = ili9320_write(lcd, 0x00e5, 0x8000); + if (ret) + goto err_initial; + + /* Start the oscillator up before we can do anything else. */ + ret = ili9320_write(lcd, ILI9320_OSCILATION, ILI9320_OSCILATION_OSC); + if (ret) + goto err_initial; + + /* must wait at-lesat 10ms after starting */ + mdelay(15); + + ret = ili9320_write_regs(lcd, vgg_init0, ARRAY_SIZE(vgg_init0)); + if (ret != 0) + goto err_initial; + + ili9320_write(lcd, ILI9320_DISPLAY2, cfg->display2); + ili9320_write(lcd, ILI9320_DISPLAY3, cfg->display3); + ili9320_write(lcd, ILI9320_DISPLAY4, cfg->display4); + + ili9320_write(lcd, ILI9320_RGB_IF1, cfg->rgb_if1); + ili9320_write(lcd, ILI9320_FRAMEMAKER, 0x0); + ili9320_write(lcd, ILI9320_RGB_IF2, ILI9320_RGBIF2_DPL); + + ret = ili9320_write_regs(lcd, vgg_init1, ARRAY_SIZE(vgg_init1)); + if (ret != 0) + goto err_vgg; + + mdelay(300); + + ret = ili9320_write_regs(lcd, vgg_init2, ARRAY_SIZE(vgg_init2)); + if (ret != 0) + goto err_vgg2; + + mdelay(100); + + ili9320_write(lcd, ILI9320_POWER3, 0x13c); + + mdelay(100); + + ili9320_write(lcd, ILI9320_POWER4, 0x1c00); + ili9320_write(lcd, ILI9320_POWER7, 0x000e); + + mdelay(100); + + ili9320_write(lcd, ILI9320_GRAM_HORIZ_ADDR, 0x00); + ili9320_write(lcd, ILI9320_GRAM_VERT_ADD, 0x00); + + ret = ili9320_write_regs(lcd, vgg_gamma, ARRAY_SIZE(vgg_gamma)); + if (ret != 0) + goto err_vgg3; + + ili9320_write(lcd, ILI9320_HORIZ_START, 0x0); + ili9320_write(lcd, ILI9320_HORIZ_END, cfg->hsize - 1); + ili9320_write(lcd, ILI9320_VERT_START, 0x0); + ili9320_write(lcd, ILI9320_VERT_END, cfg->vsize - 1); + + ili9320_write(lcd, ILI9320_DRIVER2, + ILI9320_DRIVER2_NL(((cfg->vsize - 240) / 8) + 0x1D)); + + ili9320_write(lcd, ILI9320_BASE_IMAGE, 0x1); + ili9320_write(lcd, ILI9320_VERT_SCROLL, 0x00); + + for (addr = ILI9320_PARTIAL1_POSITION; addr <= ILI9320_PARTIAL2_END; + addr++) { + ili9320_write(lcd, addr, 0x0); + } + + ili9320_write(lcd, ILI9320_INTERFACE1, 0x10); + ili9320_write(lcd, ILI9320_INTERFACE2, cfg->interface2); + ili9320_write(lcd, ILI9320_INTERFACE3, cfg->interface3); + ili9320_write(lcd, ILI9320_INTERFACE4, cfg->interface4); + ili9320_write(lcd, ILI9320_INTERFACE5, cfg->interface5); + ili9320_write(lcd, ILI9320_INTERFACE6, cfg->interface6); + + lcd->display1 = (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_DTE | + ILI9320_DISPLAY1_GON | ILI9320_DISPLAY1_BASEE | + 0x40); + + ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1); + + return 0; + + err_vgg3: + err_vgg2: + err_vgg: + err_initial: + return ret; +} + +#ifdef CONFIG_PM +static int vgg2432a4_suspend(struct spi_device *spi, pm_message_t state) +{ + return ili9320_suspend(dev_get_drvdata(&spi->dev), state); +} + +static int vgg2432a4_resume(struct spi_device *spi) +{ + return ili9320_resume(dev_get_drvdata(&spi->dev)); +} +#else +#define vgg2432a4_suspend NULL +#define vgg2432a4_resume NULL +#endif + +static struct ili9320_client vgg2432a4_client = { + .name = "VGG2432A4", + .init = vgg2432a4_lcd_init, +}; + +/* Device probe */ + +static int __devinit vgg2432a4_probe(struct spi_device *spi) +{ + int ret; + + ret = ili9320_probe_spi(spi, &vgg2432a4_client); + if (ret != 0) { + dev_err(&spi->dev, "failed to initialise ili9320\n"); + return ret; + } + + return 0; +} + +static int __devexit vgg2432a4_remove(struct spi_device *spi) +{ + return ili9320_remove(dev_get_drvdata(&spi->dev)); +} + +static void vgg2432a4_shutdown(struct spi_device *spi) +{ + ili9320_shutdown(dev_get_drvdata(&spi->dev)); +} + +static struct spi_driver vgg2432a4_driver = { + .driver = { + .name = "VGG2432A4", + .owner = THIS_MODULE, + }, + .probe = vgg2432a4_probe, + .remove = __devexit_p(vgg2432a4_remove), + .shutdown = vgg2432a4_shutdown, + .suspend = vgg2432a4_suspend, + .resume = vgg2432a4_resume, +}; + +/* Device driver initialisation */ + +static int __init vgg2432a4_init(void) +{ + return spi_register_driver(&vgg2432a4_driver); +} + +static void __exit vgg2432a4_exit(void) +{ + spi_unregister_driver(&vgg2432a4_driver); +} + +module_init(vgg2432a4_init); +module_exit(vgg2432a4_exit); + +MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>"); +MODULE_DESCRIPTION("VGG2432A4 LCD Driver"); +MODULE_LICENSE("GPL v2"); + + |