diff options
Diffstat (limited to 'drivers/video/backlight')
-rw-r--r-- | drivers/video/backlight/88pm860x_bl.c | 147 | ||||
-rw-r--r-- | drivers/video/backlight/Kconfig | 30 | ||||
-rw-r--r-- | drivers/video/backlight/Makefile | 4 | ||||
-rw-r--r-- | drivers/video/backlight/da9052_bl.c | 4 | ||||
-rw-r--r-- | drivers/video/backlight/kb3886_bl.c | 4 | ||||
-rw-r--r-- | drivers/video/backlight/lm3630_bl.c | 475 | ||||
-rw-r--r-- | drivers/video/backlight/lm3639_bl.c | 437 | ||||
-rw-r--r-- | drivers/video/backlight/ltv350qv.c | 6 | ||||
-rw-r--r-- | drivers/video/backlight/max8925_bl.c | 79 | ||||
-rw-r--r-- | drivers/video/backlight/omap1_bl.c | 4 | ||||
-rw-r--r-- | drivers/video/backlight/platform_lcd.c | 10 | ||||
-rw-r--r-- | drivers/video/backlight/progear_bl.c | 162 | ||||
-rw-r--r-- | drivers/video/backlight/pwm_bl.c | 7 | ||||
-rw-r--r-- | drivers/video/backlight/tps65217_bl.c | 342 |
14 files changed, 1420 insertions, 291 deletions
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c index f75da8758adc..b7ec34c57f46 100644 --- a/drivers/video/backlight/88pm860x_bl.c +++ b/drivers/video/backlight/88pm860x_bl.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/fb.h> @@ -31,57 +32,26 @@ struct pm860x_backlight_data { int port; int pwm; int iset; + int reg_duty_cycle; + int reg_always_on; + int reg_current; }; -static inline int wled_a(int port) -{ - int ret; - - ret = ((port - PM8606_BACKLIGHT1) << 1) + 2; - return ret; -} - -static inline int wled_b(int port) -{ - int ret; - - ret = ((port - PM8606_BACKLIGHT1) << 1) + 3; - return ret; -} - -/* WLED2 & WLED3 share the same IDC */ -static inline int wled_idc(int port) -{ - int ret; - - switch (port) { - case PM8606_BACKLIGHT1: - case PM8606_BACKLIGHT2: - ret = ((port - PM8606_BACKLIGHT1) << 1) + 3; - break; - case PM8606_BACKLIGHT3: - default: - ret = ((port - PM8606_BACKLIGHT2) << 1) + 3; - break; - } - return ret; -} - static int backlight_power_set(struct pm860x_chip *chip, int port, int on) { int ret = -EINVAL; switch (port) { - case PM8606_BACKLIGHT1: + case 0: ret = on ? pm8606_osc_enable(chip, WLED1_DUTY) : pm8606_osc_disable(chip, WLED1_DUTY); break; - case PM8606_BACKLIGHT2: + case 1: ret = on ? pm8606_osc_enable(chip, WLED2_DUTY) : pm8606_osc_disable(chip, WLED2_DUTY); break; - case PM8606_BACKLIGHT3: + case 2: ret = on ? pm8606_osc_enable(chip, WLED3_DUTY) : pm8606_osc_disable(chip, WLED3_DUTY); break; @@ -104,13 +74,13 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness) if (brightness) backlight_power_set(chip, data->port, 1); - ret = pm860x_reg_write(data->i2c, wled_a(data->port), value); + ret = pm860x_reg_write(data->i2c, data->reg_duty_cycle, value); if (ret < 0) goto out; if ((data->current_brightness == 0) && brightness) { if (data->iset) { - ret = pm860x_set_bits(data->i2c, wled_idc(data->port), + ret = pm860x_set_bits(data->i2c, data->reg_current, CURRENT_BITMASK, data->iset); if (ret < 0) goto out; @@ -123,17 +93,17 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness) } if (brightness == MAX_BRIGHTNESS) { /* set WLED_ON bit as 100% */ - ret = pm860x_set_bits(data->i2c, wled_b(data->port), + ret = pm860x_set_bits(data->i2c, data->reg_always_on, PM8606_WLED_ON, PM8606_WLED_ON); } } else { if (brightness == MAX_BRIGHTNESS) { /* set WLED_ON bit as 100% */ - ret = pm860x_set_bits(data->i2c, wled_b(data->port), + ret = pm860x_set_bits(data->i2c, data->reg_always_on, PM8606_WLED_ON, PM8606_WLED_ON); } else { /* clear WLED_ON bit since it's not 100% */ - ret = pm860x_set_bits(data->i2c, wled_b(data->port), + ret = pm860x_set_bits(data->i2c, data->reg_always_on, PM8606_WLED_ON, 0); } } @@ -174,7 +144,7 @@ static int pm860x_backlight_get_brightness(struct backlight_device *bl) struct pm860x_chip *chip = data->chip; int ret; - ret = pm860x_reg_read(data->i2c, wled_a(data->port)); + ret = pm860x_reg_read(data->i2c, data->reg_duty_cycle); if (ret < 0) goto out; data->current_brightness = ret; @@ -190,46 +160,85 @@ static const struct backlight_ops pm860x_backlight_ops = { .get_brightness = pm860x_backlight_get_brightness, }; +#ifdef CONFIG_OF +static int pm860x_backlight_dt_init(struct platform_device *pdev, + struct pm860x_backlight_data *data, + char *name) +{ + struct device_node *nproot = pdev->dev.parent->of_node, *np; + int iset = 0; + if (!nproot) + return -ENODEV; + nproot = of_find_node_by_name(nproot, "backlights"); + if (!nproot) { + dev_err(&pdev->dev, "failed to find backlights node\n"); + return -ENODEV; + } + for_each_child_of_node(nproot, np) { + if (!of_node_cmp(np->name, name)) { + of_property_read_u32(np, "marvell,88pm860x-iset", + &iset); + data->iset = PM8606_WLED_CURRENT(iset); + of_property_read_u32(np, "marvell,88pm860x-pwm", + &data->pwm); + break; + } + } + return 0; +} +#else +#define pm860x_backlight_dt_init(x, y, z) (-1) +#endif + static int pm860x_backlight_probe(struct platform_device *pdev) { struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); - struct pm860x_backlight_pdata *pdata = NULL; + struct pm860x_backlight_pdata *pdata = pdev->dev.platform_data; struct pm860x_backlight_data *data; struct backlight_device *bl; struct resource *res; struct backlight_properties props; char name[MFD_NAME_SIZE]; - int ret; - - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (res == NULL) { - dev_err(&pdev->dev, "No I/O resource!\n"); - return -EINVAL; - } - - pdata = pdev->dev.platform_data; - if (pdata == NULL) { - dev_err(&pdev->dev, "platform data isn't assigned to " - "backlight\n"); - return -EINVAL; - } + int ret = 0; data = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_backlight_data), GFP_KERNEL); if (data == NULL) return -ENOMEM; - strncpy(name, res->name, MFD_NAME_SIZE); + res = platform_get_resource_byname(pdev, IORESOURCE_REG, "duty cycle"); + if (!res) { + dev_err(&pdev->dev, "No REG resource for duty cycle\n"); + ret = -ENXIO; + goto out; + } + data->reg_duty_cycle = res->start; + res = platform_get_resource_byname(pdev, IORESOURCE_REG, "always on"); + if (!res) { + dev_err(&pdev->dev, "No REG resorce for always on\n"); + ret = -ENXIO; + goto out; + } + data->reg_always_on = res->start; + res = platform_get_resource_byname(pdev, IORESOURCE_REG, "current"); + if (!res) { + dev_err(&pdev->dev, "No REG resource for current\n"); + ret = -ENXIO; + goto out; + } + data->reg_current = res->start; + + memset(name, 0, MFD_NAME_SIZE); + sprintf(name, "backlight-%d", pdev->id); + data->port = pdev->id; data->chip = chip; data->i2c = (chip->id == CHIP_PM8606) ? chip->client \ : chip->companion; data->current_brightness = MAX_BRIGHTNESS; - data->pwm = pdata->pwm; - data->iset = pdata->iset; - data->port = pdata->flags; - if (data->port < 0) { - dev_err(&pdev->dev, "wrong platform data is assigned"); - kfree(data); - return -EINVAL; + if (pm860x_backlight_dt_init(pdev, data, name)) { + if (pdata) { + data->pwm = pdata->pwm; + data->iset = pdata->iset; + } } memset(&props, 0, sizeof(struct backlight_properties)); @@ -248,12 +257,14 @@ static int pm860x_backlight_probe(struct platform_device *pdev) /* read current backlight */ ret = pm860x_backlight_get_brightness(bl); if (ret < 0) - goto out; + goto out_brt; backlight_update_status(bl); return 0; -out: +out_brt: backlight_device_unregister(bl); +out: + devm_kfree(&pdev->dev, data); return ret; } diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index cf282763a8dc..c101697a4ba7 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -229,13 +229,6 @@ config BACKLIGHT_HP700 If you have an HP Jornada 700 series, say Y to include backlight control driver. -config BACKLIGHT_PROGEAR - tristate "Frontpath ProGear Backlight Driver" - depends on PCI && X86 - help - If you have a Frontpath ProGear say Y to enable the - backlight driver. - config BACKLIGHT_CARILLO_RANCH tristate "Intel Carillo Ranch Backlight Driver" depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578 @@ -352,6 +345,22 @@ config BACKLIGHT_AAT2870 If you have a AnalogicTech AAT2870 say Y to enable the backlight driver. +config BACKLIGHT_LM3630 + tristate "Backlight Driver for LM3630" + depends on BACKLIGHT_CLASS_DEVICE && I2C + select REGMAP_I2C + help + This supports TI LM3630 Backlight Driver + +config BACKLIGHT_LM3639 + tristate "Backlight Driver for LM3639" + depends on BACKLIGHT_CLASS_DEVICE && I2C + select REGMAP_I2C + select NEW_LEDS + select LEDS_CLASS + help + This supports TI LM3639 Backlight + 1.5A Flash LED Driver + config BACKLIGHT_LP855X tristate "Backlight driver for TI LP855X" depends on BACKLIGHT_CLASS_DEVICE && I2C @@ -373,6 +382,13 @@ config BACKLIGHT_PANDORA If you have a Pandora console, say Y to enable the backlight driver. +config BACKLIGHT_TPS65217 + tristate "TPS65217 Backlight" + depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217 + help + If you have a Texas Instruments TPS65217 say Y to enable the + backlight driver. + endif # BACKLIGHT_CLASS_DEVICE endif # BACKLIGHT_LCD_SUPPORT diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index a2ac9cfbaf6b..e7ce7291635d 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -23,10 +23,11 @@ obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o +obj-$(CONFIG_BACKLIGHT_LM3630) += lm3630_bl.o +obj-$(CONFIG_BACKLIGHT_LM3639) += lm3639_bl.o obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o -obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o @@ -43,3 +44,4 @@ obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o +obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o diff --git a/drivers/video/backlight/da9052_bl.c b/drivers/video/backlight/da9052_bl.c index b628d68f5162..ac196181fe45 100644 --- a/drivers/video/backlight/da9052_bl.c +++ b/drivers/video/backlight/da9052_bl.c @@ -72,7 +72,7 @@ static int da9052_adjust_wled_brightness(struct da9052_bl *wleds) if (ret < 0) return ret; - msleep(10); + usleep_range(10000, 11000); if (wleds->brightness) { ret = da9052_reg_write(wleds->da9052, wled_bank[wleds->led_reg], @@ -129,7 +129,6 @@ static int da9052_backlight_probe(struct platform_device *pdev) &da9052_backlight_ops, &props); if (IS_ERR(bl)) { dev_err(&pdev->dev, "Failed to register backlight\n"); - devm_kfree(&pdev->dev, wleds); return PTR_ERR(bl); } @@ -149,7 +148,6 @@ static int da9052_backlight_remove(struct platform_device *pdev) wleds->state = DA9052_WLEDS_OFF; da9052_adjust_wled_brightness(wleds); backlight_device_unregister(bl); - devm_kfree(&pdev->dev, wleds); return 0; } diff --git a/drivers/video/backlight/kb3886_bl.c b/drivers/video/backlight/kb3886_bl.c index 72dd5556a35b..6c5ed6b242cc 100644 --- a/drivers/video/backlight/kb3886_bl.c +++ b/drivers/video/backlight/kb3886_bl.c @@ -34,9 +34,9 @@ static void kb3886_bl_set_intensity(int intensity) mutex_lock(&bl_mutex); intensity = intensity&0xff; outb(KB3886_ADC_DAC_PWM, KB3886_PARENT); - msleep(10); + usleep_range(10000, 11000); outb(KB3886_PWM0_WRITE, KB3886_IO); - msleep(10); + usleep_range(10000, 11000); outb(intensity, KB3886_IO); mutex_unlock(&bl_mutex); } diff --git a/drivers/video/backlight/lm3630_bl.c b/drivers/video/backlight/lm3630_bl.c new file mode 100644 index 000000000000..dc191441796f --- /dev/null +++ b/drivers/video/backlight/lm3630_bl.c @@ -0,0 +1,475 @@ +/* +* Simple driver for Texas Instruments LM3630 Backlight driver chip +* Copyright (C) 2012 Texas Instruments +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/interrupt.h> +#include <linux/regmap.h> +#include <linux/platform_data/lm3630_bl.h> + +#define REG_CTRL 0x00 +#define REG_CONFIG 0x01 +#define REG_BRT_A 0x03 +#define REG_BRT_B 0x04 +#define REG_INT_STATUS 0x09 +#define REG_INT_EN 0x0A +#define REG_FAULT 0x0B +#define REG_PWM_OUTLOW 0x12 +#define REG_PWM_OUTHIGH 0x13 +#define REG_MAX 0x1F + +#define INT_DEBOUNCE_MSEC 10 + +enum lm3630_leds { + BLED_ALL = 0, + BLED_1, + BLED_2 +}; + +static const char *bled_name[] = { + [BLED_ALL] = "lm3630_bled", /*Bank1 controls all string */ + [BLED_1] = "lm3630_bled1", /*Bank1 controls bled1 */ + [BLED_2] = "lm3630_bled2", /*Bank1 or 2 controls bled2 */ +}; + +struct lm3630_chip_data { + struct device *dev; + struct delayed_work work; + int irq; + struct workqueue_struct *irqthread; + struct lm3630_platform_data *pdata; + struct backlight_device *bled1; + struct backlight_device *bled2; + struct regmap *regmap; +}; + +/* initialize chip */ +static int __devinit lm3630_chip_init(struct lm3630_chip_data *pchip) +{ + int ret; + unsigned int reg_val; + struct lm3630_platform_data *pdata = pchip->pdata; + + /*pwm control */ + reg_val = ((pdata->pwm_active & 0x01) << 2) | (pdata->pwm_ctrl & 0x03); + ret = regmap_update_bits(pchip->regmap, REG_CONFIG, 0x07, reg_val); + if (ret < 0) + goto out; + + /* bank control */ + reg_val = ((pdata->bank_b_ctrl & 0x01) << 1) | + (pdata->bank_a_ctrl & 0x07); + ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x07, reg_val); + if (ret < 0) + goto out; + + ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00); + if (ret < 0) + goto out; + + /* set initial brightness */ + if (pdata->bank_a_ctrl != BANK_A_CTRL_DISABLE) { + ret = regmap_write(pchip->regmap, + REG_BRT_A, pdata->init_brt_led1); + if (ret < 0) + goto out; + } + + if (pdata->bank_b_ctrl != BANK_B_CTRL_DISABLE) { + ret = regmap_write(pchip->regmap, + REG_BRT_B, pdata->init_brt_led2); + if (ret < 0) + goto out; + } + return ret; + +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return ret; +} + +/* interrupt handling */ +static void lm3630_delayed_func(struct work_struct *work) +{ + int ret; + unsigned int reg_val; + struct lm3630_chip_data *pchip; + + pchip = container_of(work, struct lm3630_chip_data, work.work); + + ret = regmap_read(pchip->regmap, REG_INT_STATUS, ®_val); + if (ret < 0) { + dev_err(pchip->dev, + "i2c failed to access REG_INT_STATUS Register\n"); + return; + } + + dev_info(pchip->dev, "REG_INT_STATUS Register is 0x%x\n", reg_val); +} + +static irqreturn_t lm3630_isr_func(int irq, void *chip) +{ + int ret; + struct lm3630_chip_data *pchip = chip; + unsigned long delay = msecs_to_jiffies(INT_DEBOUNCE_MSEC); + + queue_delayed_work(pchip->irqthread, &pchip->work, delay); + + ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00); + if (ret < 0) + goto out; + + return IRQ_HANDLED; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return IRQ_HANDLED; +} + +static int lm3630_intr_config(struct lm3630_chip_data *pchip) +{ + INIT_DELAYED_WORK(&pchip->work, lm3630_delayed_func); + pchip->irqthread = create_singlethread_workqueue("lm3630-irqthd"); + if (!pchip->irqthread) { + dev_err(pchip->dev, "create irq thread fail...\n"); + return -1; + } + if (request_threaded_irq + (pchip->irq, NULL, lm3630_isr_func, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lm3630_irq", pchip)) { + dev_err(pchip->dev, "request threaded irq fail..\n"); + return -1; + } + return 0; +} + +static bool +set_intensity(struct backlight_device *bl, struct lm3630_chip_data *pchip) +{ + if (!pchip->pdata->pwm_set_intensity) + return false; + pchip->pdata->pwm_set_intensity(bl->props.brightness - 1, + pchip->pdata->pwm_period); + return true; +} + +/* update and get brightness */ +static int lm3630_bank_a_update_status(struct backlight_device *bl) +{ + int ret; + struct lm3630_chip_data *pchip = bl_get_data(bl); + enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; + + /* brightness 0 means disable */ + if (!bl->props.brightness) { + ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x04, 0x00); + if (ret < 0) + goto out; + return bl->props.brightness; + } + + /* pwm control */ + if (pwm_ctrl == PWM_CTRL_BANK_A || pwm_ctrl == PWM_CTRL_BANK_ALL) { + if (!set_intensity(bl, pchip)) + dev_err(pchip->dev, "No pwm control func. in plat-data\n"); + } else { + + /* i2c control */ + ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00); + if (ret < 0) + goto out; + mdelay(1); + ret = regmap_write(pchip->regmap, + REG_BRT_A, bl->props.brightness - 1); + if (ret < 0) + goto out; + } + return bl->props.brightness; +out: + dev_err(pchip->dev, "i2c failed to access REG_CTRL\n"); + return bl->props.brightness; +} + +static int lm3630_bank_a_get_brightness(struct backlight_device *bl) +{ + unsigned int reg_val; + int brightness, ret; + struct lm3630_chip_data *pchip = bl_get_data(bl); + enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; + + if (pwm_ctrl == PWM_CTRL_BANK_A || pwm_ctrl == PWM_CTRL_BANK_ALL) { + ret = regmap_read(pchip->regmap, REG_PWM_OUTHIGH, ®_val); + if (ret < 0) + goto out; + brightness = reg_val & 0x01; + ret = regmap_read(pchip->regmap, REG_PWM_OUTLOW, ®_val); + if (ret < 0) + goto out; + brightness = ((brightness << 8) | reg_val) + 1; + } else { + ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00); + if (ret < 0) + goto out; + mdelay(1); + ret = regmap_read(pchip->regmap, REG_BRT_A, ®_val); + if (ret < 0) + goto out; + brightness = reg_val + 1; + } + bl->props.brightness = brightness; + return bl->props.brightness; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return 0; +} + +static const struct backlight_ops lm3630_bank_a_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = lm3630_bank_a_update_status, + .get_brightness = lm3630_bank_a_get_brightness, +}; + +static int lm3630_bank_b_update_status(struct backlight_device *bl) +{ + int ret; + struct lm3630_chip_data *pchip = bl_get_data(bl); + enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; + + if (pwm_ctrl == PWM_CTRL_BANK_B || pwm_ctrl == PWM_CTRL_BANK_ALL) { + if (!set_intensity(bl, pchip)) + dev_err(pchip->dev, + "no pwm control func. in plat-data\n"); + } else { + ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00); + if (ret < 0) + goto out; + mdelay(1); + ret = regmap_write(pchip->regmap, + REG_BRT_B, bl->props.brightness - 1); + } + return bl->props.brightness; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return bl->props.brightness; +} + +static int lm3630_bank_b_get_brightness(struct backlight_device *bl) +{ + unsigned int reg_val; + int brightness, ret; + struct lm3630_chip_data *pchip = bl_get_data(bl); + enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; + + if (pwm_ctrl == PWM_CTRL_BANK_B || pwm_ctrl == PWM_CTRL_BANK_ALL) { + ret = regmap_read(pchip->regmap, REG_PWM_OUTHIGH, ®_val); + if (ret < 0) + goto out; + brightness = reg_val & 0x01; + ret = regmap_read(pchip->regmap, REG_PWM_OUTLOW, ®_val); + if (ret < 0) + goto out; + brightness = ((brightness << 8) | reg_val) + 1; + } else { + ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00); + if (ret < 0) + goto out; + mdelay(1); + ret = regmap_read(pchip->regmap, REG_BRT_B, ®_val); + if (ret < 0) + goto out; + brightness = reg_val + 1; + } + bl->props.brightness = brightness; + + return bl->props.brightness; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return bl->props.brightness; +} + +static const struct backlight_ops lm3630_bank_b_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = lm3630_bank_b_update_status, + .get_brightness = lm3630_bank_b_get_brightness, +}; + +static int lm3630_backlight_register(struct lm3630_chip_data *pchip, + enum lm3630_leds ledno) +{ + const char *name = bled_name[ledno]; + struct backlight_properties props; + struct lm3630_platform_data *pdata = pchip->pdata; + + props.type = BACKLIGHT_RAW; + switch (ledno) { + case BLED_1: + case BLED_ALL: + props.brightness = pdata->init_brt_led1; + props.max_brightness = pdata->max_brt_led1; + pchip->bled1 = + backlight_device_register(name, pchip->dev, pchip, + &lm3630_bank_a_ops, &props); + if (IS_ERR(pchip->bled1)) + return -EIO; + break; + case BLED_2: + props.brightness = pdata->init_brt_led2; + props.max_brightness = pdata->max_brt_led2; + pchip->bled2 = + backlight_device_register(name, pchip->dev, pchip, + &lm3630_bank_b_ops, &props); + if (IS_ERR(pchip->bled2)) + return -EIO; + break; + } + return 0; +} + +static void lm3630_backlight_unregister(struct lm3630_chip_data *pchip) +{ + if (pchip->bled1) + backlight_device_unregister(pchip->bled1); + if (pchip->bled2) + backlight_device_unregister(pchip->bled2); +} + +static const struct regmap_config lm3630_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = REG_MAX, +}; + +static int __devinit lm3630_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm3630_platform_data *pdata = client->dev.platform_data; + struct lm3630_chip_data *pchip; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "fail : i2c functionality check...\n"); + return -EOPNOTSUPP; + } + + if (pdata == NULL) { + dev_err(&client->dev, "fail : no platform data.\n"); + return -ENODATA; + } + + pchip = devm_kzalloc(&client->dev, sizeof(struct lm3630_chip_data), + GFP_KERNEL); + if (!pchip) + return -ENOMEM; + pchip->pdata = pdata; + pchip->dev = &client->dev; + + pchip->regmap = devm_regmap_init_i2c(client, &lm3630_regmap); + if (IS_ERR(pchip->regmap)) { + ret = PTR_ERR(pchip->regmap); + dev_err(&client->dev, "fail : allocate register map: %d\n", + ret); + return ret; + } + i2c_set_clientdata(client, pchip); + + /* chip initialize */ + ret = lm3630_chip_init(pchip); + if (ret < 0) { + dev_err(&client->dev, "fail : init chip\n"); + goto err_chip_init; + } + + switch (pdata->bank_a_ctrl) { + case BANK_A_CTRL_ALL: + ret = lm3630_backlight_register(pchip, BLED_ALL); + pdata->bank_b_ctrl = BANK_B_CTRL_DISABLE; + break; + case BANK_A_CTRL_LED1: + ret = lm3630_backlight_register(pchip, BLED_1); + break; + case BANK_A_CTRL_LED2: + ret = lm3630_backlight_register(pchip, BLED_2); + pdata->bank_b_ctrl = BANK_B_CTRL_DISABLE; + break; + default: + break; + } + + if (ret < 0) + goto err_bl_reg; + + if (pdata->bank_b_ctrl && pchip->bled2 == NULL) { + ret = lm3630_backlight_register(pchip, BLED_2); + if (ret < 0) + goto err_bl_reg; + } + + /* interrupt enable : irq 0 is not allowed for lm3630 */ + pchip->irq = client->irq; + if (pchip->irq) + lm3630_intr_config(pchip); + + dev_info(&client->dev, "LM3630 backlight register OK.\n"); + return 0; + +err_bl_reg: + dev_err(&client->dev, "fail : backlight register.\n"); + lm3630_backlight_unregister(pchip); +err_chip_init: + return ret; +} + +static int __devexit lm3630_remove(struct i2c_client *client) +{ + int ret; + struct lm3630_chip_data *pchip = i2c_get_clientdata(client); + + ret = regmap_write(pchip->regmap, REG_BRT_A, 0); + if (ret < 0) + dev_err(pchip->dev, "i2c failed to access register\n"); + + ret = regmap_write(pchip->regmap, REG_BRT_B, 0); + if (ret < 0) + dev_err(pchip->dev, "i2c failed to access register\n"); + + lm3630_backlight_unregister(pchip); + if (pchip->irq) { + free_irq(pchip->irq, pchip); + flush_workqueue(pchip->irqthread); + destroy_workqueue(pchip->irqthread); + } + return 0; +} + +static const struct i2c_device_id lm3630_id[] = { + {LM3630_NAME, 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lm3630_id); + +static struct i2c_driver lm3630_i2c_driver = { + .driver = { + .name = LM3630_NAME, + }, + .probe = lm3630_probe, + .remove = __devexit_p(lm3630_remove), + .id_table = lm3630_id, +}; + +module_i2c_driver(lm3630_i2c_driver); + +MODULE_DESCRIPTION("Texas Instruments Backlight driver for LM3630"); +MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>"); +MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/lm3639_bl.c b/drivers/video/backlight/lm3639_bl.c new file mode 100644 index 000000000000..c6915c6c3cd1 --- /dev/null +++ b/drivers/video/backlight/lm3639_bl.c @@ -0,0 +1,437 @@ +/* +* Simple driver for Texas Instruments LM3639 Backlight + Flash LED driver chip +* Copyright (C) 2012 Texas Instruments +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/interrupt.h> +#include <linux/regmap.h> +#include <linux/platform_data/lm3639_bl.h> + +#define REG_DEV_ID 0x00 +#define REG_CHECKSUM 0x01 +#define REG_BL_CONF_1 0x02 +#define REG_BL_CONF_2 0x03 +#define REG_BL_CONF_3 0x04 +#define REG_BL_CONF_4 0x05 +#define REG_FL_CONF_1 0x06 +#define REG_FL_CONF_2 0x07 +#define REG_FL_CONF_3 0x08 +#define REG_IO_CTRL 0x09 +#define REG_ENABLE 0x0A +#define REG_FLAG 0x0B +#define REG_MAX REG_FLAG + +struct lm3639_chip_data { + struct device *dev; + struct lm3639_platform_data *pdata; + + struct backlight_device *bled; + struct led_classdev cdev_flash; + struct led_classdev cdev_torch; + struct regmap *regmap; + + unsigned int bled_mode; + unsigned int bled_map; + unsigned int last_flag; +}; + +/* initialize chip */ +static int __devinit lm3639_chip_init(struct lm3639_chip_data *pchip) +{ + int ret; + unsigned int reg_val; + struct lm3639_platform_data *pdata = pchip->pdata; + + /* input pins config. */ + ret = + regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x08, + pdata->pin_pwm); + if (ret < 0) + goto out; + + reg_val = (pdata->pin_pwm & 0x40) | pdata->pin_strobe | pdata->pin_tx; + ret = regmap_update_bits(pchip->regmap, REG_IO_CTRL, 0x7C, reg_val); + if (ret < 0) + goto out; + + /* init brightness */ + ret = regmap_write(pchip->regmap, REG_BL_CONF_4, pdata->init_brt_led); + if (ret < 0) + goto out; + + ret = regmap_write(pchip->regmap, REG_BL_CONF_3, pdata->init_brt_led); + if (ret < 0) + goto out; + + /* output pins config. */ + if (!pdata->init_brt_led) + reg_val = pdata->fled_pins | pdata->bled_pins; + else + reg_val = pdata->fled_pins | pdata->bled_pins | 0x01; + + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x79, reg_val); + if (ret < 0) + goto out; + + return ret; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return ret; +} + +/* update and get brightness */ +static int lm3639_bled_update_status(struct backlight_device *bl) +{ + int ret; + unsigned int reg_val; + struct lm3639_chip_data *pchip = bl_get_data(bl); + struct lm3639_platform_data *pdata = pchip->pdata; + + ret = regmap_read(pchip->regmap, REG_FLAG, ®_val); + if (ret < 0) + goto out; + + if (reg_val != 0) + dev_info(pchip->dev, "last flag is 0x%x\n", reg_val); + + /* pwm control */ + if (pdata->pin_pwm) { + if (pdata->pwm_set_intensity) + pdata->pwm_set_intensity(bl->props.brightness, + pdata->max_brt_led); + else + dev_err(pchip->dev, + "No pwm control func. in plat-data\n"); + return bl->props.brightness; + } + + /* i2c control and set brigtness */ + ret = regmap_write(pchip->regmap, REG_BL_CONF_4, bl->props.brightness); + if (ret < 0) + goto out; + ret = regmap_write(pchip->regmap, REG_BL_CONF_3, bl->props.brightness); + if (ret < 0) + goto out; + + if (!bl->props.brightness) + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x01, 0x00); + else + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x01, 0x01); + if (ret < 0) + goto out; + + return bl->props.brightness; +out: + dev_err(pchip->dev, "i2c failed to access registers\n"); + return bl->props.brightness; +} + +static int lm3639_bled_get_brightness(struct backlight_device *bl) +{ + int ret; + unsigned int reg_val; + struct lm3639_chip_data *pchip = bl_get_data(bl); + struct lm3639_platform_data *pdata = pchip->pdata; + + if (pdata->pin_pwm) { + if (pdata->pwm_get_intensity) + bl->props.brightness = pdata->pwm_get_intensity(); + else + dev_err(pchip->dev, + "No pwm control func. in plat-data\n"); + return bl->props.brightness; + } + + ret = regmap_read(pchip->regmap, REG_BL_CONF_1, ®_val); + if (ret < 0) + goto out; + if (reg_val & 0x10) + ret = regmap_read(pchip->regmap, REG_BL_CONF_4, ®_val); + else + ret = regmap_read(pchip->regmap, REG_BL_CONF_3, ®_val); + if (ret < 0) + goto out; + bl->props.brightness = reg_val; + + return bl->props.brightness; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return bl->props.brightness; +} + +static const struct backlight_ops lm3639_bled_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = lm3639_bled_update_status, + .get_brightness = lm3639_bled_get_brightness, +}; + +/* backlight mapping mode */ +static ssize_t lm3639_bled_mode_store(struct device *dev, + struct device_attribute *devAttr, + const char *buf, size_t size) +{ + ssize_t ret; + struct lm3639_chip_data *pchip = dev_get_drvdata(dev); + unsigned int state; + + ret = kstrtouint(buf, 10, &state); + if (ret) + goto out_input; + + if (!state) + ret = + regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x10, + 0x00); + else + ret = + regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x10, + 0x10); + + if (ret < 0) + goto out; + + return size; + +out: + dev_err(pchip->dev, "%s:i2c access fail to register\n", __func__); + return size; + +out_input: + dev_err(pchip->dev, "%s:input conversion fail\n", __func__); + return size; + +} + +static DEVICE_ATTR(bled_mode, 0666, NULL, lm3639_bled_mode_store); + +/* torch */ +static void lm3639_torch_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + int ret; + unsigned int reg_val; + struct lm3639_chip_data *pchip; + + pchip = container_of(cdev, struct lm3639_chip_data, cdev_torch); + + ret = regmap_read(pchip->regmap, REG_FLAG, ®_val); + if (ret < 0) + goto out; + if (reg_val != 0) + dev_info(pchip->dev, "last flag is 0x%x\n", reg_val); + + /* brightness 0 means off state */ + if (!brightness) { + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x00); + if (ret < 0) + goto out; + return; + } + + ret = regmap_update_bits(pchip->regmap, + REG_FL_CONF_1, 0x70, (brightness - 1) << 4); + if (ret < 0) + goto out; + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x02); + if (ret < 0) + goto out; + + return; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return; +} + +/* flash */ +static void lm3639_flash_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + int ret; + unsigned int reg_val; + struct lm3639_chip_data *pchip; + + pchip = container_of(cdev, struct lm3639_chip_data, cdev_flash); + + ret = regmap_read(pchip->regmap, REG_FLAG, ®_val); + if (ret < 0) + goto out; + if (reg_val != 0) + dev_info(pchip->dev, "last flag is 0x%x\n", reg_val); + + /* torch off before flash control */ + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x00); + if (ret < 0) + goto out; + + /* brightness 0 means off state */ + if (!brightness) + return; + + ret = regmap_update_bits(pchip->regmap, + REG_FL_CONF_1, 0x0F, brightness - 1); + if (ret < 0) + goto out; + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x06); + if (ret < 0) + goto out; + + return; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return; +} + +static const struct regmap_config lm3639_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = REG_MAX, +}; + +static int __devinit lm3639_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct lm3639_chip_data *pchip; + struct lm3639_platform_data *pdata = client->dev.platform_data; + struct backlight_properties props; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "i2c functionality check fail.\n"); + return -EOPNOTSUPP; + } + + if (pdata == NULL) { + dev_err(&client->dev, "Needs Platform Data.\n"); + return -ENODATA; + } + + pchip = devm_kzalloc(&client->dev, + sizeof(struct lm3639_chip_data), GFP_KERNEL); + if (!pchip) + return -ENOMEM; + + pchip->pdata = pdata; + pchip->dev = &client->dev; + + pchip->regmap = devm_regmap_init_i2c(client, &lm3639_regmap); + if (IS_ERR(pchip->regmap)) { + ret = PTR_ERR(pchip->regmap); + dev_err(&client->dev, "fail : allocate register map: %d\n", + ret); + return ret; + } + i2c_set_clientdata(client, pchip); + + /* chip initialize */ + ret = lm3639_chip_init(pchip); + if (ret < 0) { + dev_err(&client->dev, "fail : chip init\n"); + goto err_out; + } + + /* backlight */ + props.type = BACKLIGHT_RAW; + props.brightness = pdata->init_brt_led; + props.max_brightness = pdata->max_brt_led; + pchip->bled = + backlight_device_register("lm3639_bled", pchip->dev, pchip, + &lm3639_bled_ops, &props); + if (IS_ERR(pchip->bled)) { + dev_err(&client->dev, "fail : backlight register\n"); + ret = -EIO; + goto err_out; + } + + ret = device_create_file(&(pchip->bled->dev), &dev_attr_bled_mode); + if (ret < 0) { + dev_err(&client->dev, "failed : add sysfs entries\n"); + ret = -EIO; + goto err_bled_mode; + } + + /* flash */ + pchip->cdev_flash.name = "lm3639_flash"; + pchip->cdev_flash.max_brightness = 16; + pchip->cdev_flash.brightness_set = lm3639_flash_brightness_set; + ret = led_classdev_register((struct device *) + &client->dev, &pchip->cdev_flash); + if (ret < 0) { + dev_err(&client->dev, "fail : flash register\n"); + ret = -EIO; + goto err_flash; + } + + /* torch */ + pchip->cdev_torch.name = "lm3639_torch"; + pchip->cdev_torch.max_brightness = 8; + pchip->cdev_torch.brightness_set = lm3639_torch_brightness_set; + ret = led_classdev_register((struct device *) + &client->dev, &pchip->cdev_torch); + if (ret < 0) { + dev_err(&client->dev, "fail : torch register\n"); + ret = -EIO; + goto err_torch; + } + + return 0; + +err_torch: + led_classdev_unregister(&pchip->cdev_flash); +err_flash: + device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode); +err_bled_mode: + backlight_device_unregister(pchip->bled); +err_out: + return ret; +} + +static int __devexit lm3639_remove(struct i2c_client *client) +{ + struct lm3639_chip_data *pchip = i2c_get_clientdata(client); + + regmap_write(pchip->regmap, REG_ENABLE, 0x00); + + if (&pchip->cdev_torch) + led_classdev_unregister(&pchip->cdev_torch); + if (&pchip->cdev_flash) + led_classdev_unregister(&pchip->cdev_flash); + if (pchip->bled) { + device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode); + backlight_device_unregister(pchip->bled); + } + return 0; +} + +static const struct i2c_device_id lm3639_id[] = { + {LM3639_NAME, 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lm3639_id); +static struct i2c_driver lm3639_i2c_driver = { + .driver = { + .name = LM3639_NAME, + }, + .probe = lm3639_probe, + .remove = __devexit_p(lm3639_remove), + .id_table = lm3639_id, +}; + +module_i2c_driver(lm3639_i2c_driver); + +MODULE_DESCRIPTION("Texas Instruments Backlight+Flash LED driver for LM3639"); +MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>"); +MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c index 6c0f1ac0d32a..4066a5bbd826 100644 --- a/drivers/video/backlight/ltv350qv.c +++ b/drivers/video/backlight/ltv350qv.c @@ -75,7 +75,7 @@ static int ltv350qv_power_on(struct ltv350qv *lcd) /* Power On Reset Display off State */ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000)) goto err; - msleep(15); + usleep_range(15000, 16000); /* Power Setting Function 1 */ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE)) @@ -153,7 +153,7 @@ err_settings: err_power2: err_power1: ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000); - msleep(1); + usleep_range(1000, 1100); err: ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE); return -EIO; @@ -175,7 +175,7 @@ static int ltv350qv_power_off(struct ltv350qv *lcd) ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000); /* Wait at least 1 ms */ - msleep(1); + usleep_range(1000, 1100); /* Power down setting 2 */ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE); diff --git a/drivers/video/backlight/max8925_bl.c b/drivers/video/backlight/max8925_bl.c index e833ac72e063..f72ba54f364e 100644 --- a/drivers/video/backlight/max8925_bl.c +++ b/drivers/video/backlight/max8925_bl.c @@ -27,7 +27,9 @@ struct max8925_backlight_data { struct max8925_chip *chip; - int current_brightness; + int current_brightness; + int reg_mode_cntl; + int reg_cntl; }; static int max8925_backlight_set(struct backlight_device *bl, int brightness) @@ -42,16 +44,16 @@ static int max8925_backlight_set(struct backlight_device *bl, int brightness) else value = brightness; - ret = max8925_reg_write(chip->i2c, MAX8925_WLED_CNTL, value); + ret = max8925_reg_write(chip->i2c, data->reg_cntl, value); if (ret < 0) goto out; if (!data->current_brightness && brightness) /* enable WLED output */ - ret = max8925_set_bits(chip->i2c, MAX8925_WLED_MODE_CNTL, 1, 1); + ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 1, 1); else if (!brightness) /* disable WLED output */ - ret = max8925_set_bits(chip->i2c, MAX8925_WLED_MODE_CNTL, 1, 0); + ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 1, 0); if (ret < 0) goto out; dev_dbg(chip->dev, "set brightness %d\n", value); @@ -85,7 +87,7 @@ static int max8925_backlight_get_brightness(struct backlight_device *bl) struct max8925_chip *chip = data->chip; int ret; - ret = max8925_reg_read(chip->i2c, MAX8925_WLED_CNTL); + ret = max8925_reg_read(chip->i2c, data->reg_cntl); if (ret < 0) return -EINVAL; data->current_brightness = ret; @@ -102,69 +104,70 @@ static const struct backlight_ops max8925_backlight_ops = { static int __devinit max8925_backlight_probe(struct platform_device *pdev) { struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent); - struct max8925_platform_data *max8925_pdata; - struct max8925_backlight_pdata *pdata = NULL; + struct max8925_backlight_pdata *pdata = pdev->dev.platform_data; struct max8925_backlight_data *data; struct backlight_device *bl; struct backlight_properties props; struct resource *res; - char name[MAX8925_NAME_SIZE]; unsigned char value; - int ret; - - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (res == NULL) { - dev_err(&pdev->dev, "No I/O resource!\n"); - return -EINVAL; - } - - if (pdev->dev.parent->platform_data) { - max8925_pdata = pdev->dev.parent->platform_data; - pdata = max8925_pdata->backlight; - } - - if (!pdata) { - dev_err(&pdev->dev, "platform data isn't assigned to " - "backlight\n"); - return -EINVAL; - } + int ret = 0; data = devm_kzalloc(&pdev->dev, sizeof(struct max8925_backlight_data), GFP_KERNEL); if (data == NULL) return -ENOMEM; - strncpy(name, res->name, MAX8925_NAME_SIZE); + + res = platform_get_resource(pdev, IORESOURCE_REG, 0); + if (!res) { + dev_err(&pdev->dev, "No REG resource for mode control!\n"); + ret = -ENXIO; + goto out; + } + data->reg_mode_cntl = res->start; + res = platform_get_resource(pdev, IORESOURCE_REG, 1); + if (!res) { + dev_err(&pdev->dev, "No REG resource for control!\n"); + ret = -ENXIO; + goto out; + } + data->reg_cntl = res->start; + data->chip = chip; data->current_brightness = 0; memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_RAW; props.max_brightness = MAX_BRIGHTNESS; - bl = backlight_device_register(name, &pdev->dev, data, + bl = backlight_device_register("max8925-backlight", &pdev->dev, data, &max8925_backlight_ops, &props); if (IS_ERR(bl)) { dev_err(&pdev->dev, "failed to register backlight\n"); - return PTR_ERR(bl); + ret = PTR_ERR(bl); + goto out; } bl->props.brightness = MAX_BRIGHTNESS; platform_set_drvdata(pdev, bl); value = 0; - if (pdata->lxw_scl) - value |= (1 << 7); - if (pdata->lxw_freq) - value |= (LWX_FREQ(pdata->lxw_freq) << 4); - if (pdata->dual_string) - value |= (1 << 1); - ret = max8925_set_bits(chip->i2c, MAX8925_WLED_MODE_CNTL, 0xfe, value); + if (pdata) { + if (pdata->lxw_scl) + value |= (1 << 7); + if (pdata->lxw_freq) + value |= (LWX_FREQ(pdata->lxw_freq) << 4); + if (pdata->dual_string) + value |= (1 << 1); + } + ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 0xfe, value); if (ret < 0) - goto out; + goto out_brt; backlight_update_status(bl); return 0; -out: +out_brt: backlight_device_unregister(bl); +out: + devm_kfree(&pdev->dev, data); return ret; } diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c index bfdc5fbeaa11..9a046a4c98f5 100644 --- a/drivers/video/backlight/omap1_bl.c +++ b/drivers/video/backlight/omap1_bl.c @@ -27,10 +27,10 @@ #include <linux/fb.h> #include <linux/backlight.h> #include <linux/slab.h> +#include <linux/platform_data/omap1_bl.h> #include <mach/hardware.h> -#include <plat/board.h> -#include <plat/mux.h> +#include <mach/mux.h> #define OMAPBL_MAX_INTENSITY 0xff diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c index b6672340d6c7..ca4f5d70fe10 100644 --- a/drivers/video/backlight/platform_lcd.c +++ b/drivers/video/backlight/platform_lcd.c @@ -16,6 +16,7 @@ #include <linux/fb.h> #include <linux/backlight.h> #include <linux/lcd.h> +#include <linux/of.h> #include <linux/slab.h> #include <video/platform_lcd.h> @@ -145,6 +146,14 @@ static SIMPLE_DEV_PM_OPS(platform_lcd_pm_ops, platform_lcd_suspend, platform_lcd_resume); #endif +#ifdef CONFIG_OF +static const struct of_device_id platform_lcd_of_match[] = { + { .compatible = "platform-lcd" }, + {}, +}; +MODULE_DEVICE_TABLE(of, platform_lcd_of_match); +#endif + static struct platform_driver platform_lcd_driver = { .driver = { .name = "platform-lcd", @@ -152,6 +161,7 @@ static struct platform_driver platform_lcd_driver = { #ifdef CONFIG_PM .pm = &platform_lcd_pm_ops, #endif + .of_match_table = of_match_ptr(platform_lcd_of_match), }, .probe = platform_lcd_probe, .remove = __devexit_p(platform_lcd_remove), diff --git a/drivers/video/backlight/progear_bl.c b/drivers/video/backlight/progear_bl.c deleted file mode 100644 index 69b35f02929e..000000000000 --- a/drivers/video/backlight/progear_bl.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Backlight Driver for Frontpath ProGear HX1050+ - * - * Copyright (c) 2006 Marcin Juszkiewicz - * - * Based on Progear LCD driver by M Schacht - * <mschacht at alumni dot washington dot edu> - * - * Based on Sharp's Corgi Backlight Driver - * Based on Backlight Driver for HP Jornada 680 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mutex.h> -#include <linux/fb.h> -#include <linux/backlight.h> -#include <linux/pci.h> - -#define PMU_LPCR 0xB0 -#define SB_MPS1 0x61 -#define HW_LEVEL_MAX 0x77 -#define HW_LEVEL_MIN 0x4f - -static struct pci_dev *pmu_dev = NULL; -static struct pci_dev *sb_dev = NULL; - -static int progearbl_set_intensity(struct backlight_device *bd) -{ - int intensity = bd->props.brightness; - - if (bd->props.power != FB_BLANK_UNBLANK) - intensity = 0; - if (bd->props.fb_blank != FB_BLANK_UNBLANK) - intensity = 0; - - pci_write_config_byte(pmu_dev, PMU_LPCR, intensity + HW_LEVEL_MIN); - - return 0; -} - -static int progearbl_get_intensity(struct backlight_device *bd) -{ - u8 intensity; - pci_read_config_byte(pmu_dev, PMU_LPCR, &intensity); - - return intensity - HW_LEVEL_MIN; -} - -static const struct backlight_ops progearbl_ops = { - .get_brightness = progearbl_get_intensity, - .update_status = progearbl_set_intensity, -}; - -static int progearbl_probe(struct platform_device *pdev) -{ - struct backlight_properties props; - u8 temp; - struct backlight_device *progear_backlight_device; - int ret; - - pmu_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, NULL); - if (!pmu_dev) { - pr_err("ALI M7101 PMU not found.\n"); - return -ENODEV; - } - - sb_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); - if (!sb_dev) { - pr_err("ALI 1533 SB not found.\n"); - ret = -ENODEV; - goto put_pmu; - } - - /* Set SB_MPS1 to enable brightness control. */ - pci_read_config_byte(sb_dev, SB_MPS1, &temp); - pci_write_config_byte(sb_dev, SB_MPS1, temp | 0x20); - - memset(&props, 0, sizeof(struct backlight_properties)); - props.type = BACKLIGHT_RAW; - props.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN; - progear_backlight_device = backlight_device_register("progear-bl", - &pdev->dev, NULL, - &progearbl_ops, - &props); - if (IS_ERR(progear_backlight_device)) { - ret = PTR_ERR(progear_backlight_device); - goto put_sb; - } - - platform_set_drvdata(pdev, progear_backlight_device); - - progear_backlight_device->props.power = FB_BLANK_UNBLANK; - progear_backlight_device->props.brightness = HW_LEVEL_MAX - HW_LEVEL_MIN; - progearbl_set_intensity(progear_backlight_device); - - return 0; -put_sb: - pci_dev_put(sb_dev); -put_pmu: - pci_dev_put(pmu_dev); - return ret; -} - -static int progearbl_remove(struct platform_device *pdev) -{ - struct backlight_device *bd = platform_get_drvdata(pdev); - backlight_device_unregister(bd); - - return 0; -} - -static struct platform_driver progearbl_driver = { - .probe = progearbl_probe, - .remove = progearbl_remove, - .driver = { - .name = "progear-bl", - }, -}; - -static struct platform_device *progearbl_device; - -static int __init progearbl_init(void) -{ - int ret = platform_driver_register(&progearbl_driver); - - if (ret) - return ret; - progearbl_device = platform_device_register_simple("progear-bl", -1, - NULL, 0); - if (IS_ERR(progearbl_device)) { - platform_driver_unregister(&progearbl_driver); - return PTR_ERR(progearbl_device); - } - - return 0; -} - -static void __exit progearbl_exit(void) -{ - pci_dev_put(pmu_dev); - pci_dev_put(sb_dev); - - platform_device_unregister(progearbl_device); - platform_driver_unregister(&progearbl_driver); -} - -module_init(progearbl_init); -module_exit(progearbl_exit); - -MODULE_AUTHOR("Marcin Juszkiewicz <linux@hrw.one.pl>"); -MODULE_DESCRIPTION("ProGear Backlight Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 995f0164c9b0..069983ca49ff 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -213,7 +213,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->exit = data->exit; pb->dev = &pdev->dev; - pb->pwm = pwm_get(&pdev->dev, NULL); + pb->pwm = devm_pwm_get(&pdev->dev, NULL); if (IS_ERR(pb->pwm)) { dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); @@ -246,7 +246,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) if (IS_ERR(bl)) { dev_err(&pdev->dev, "failed to register backlight\n"); ret = PTR_ERR(bl); - goto err_bl; + goto err_alloc; } bl->props.brightness = data->dft_brightness; @@ -255,8 +255,6 @@ static int pwm_backlight_probe(struct platform_device *pdev) platform_set_drvdata(pdev, bl); return 0; -err_bl: - pwm_put(pb->pwm); err_alloc: if (data->exit) data->exit(&pdev->dev); @@ -271,7 +269,6 @@ static int pwm_backlight_remove(struct platform_device *pdev) backlight_device_unregister(bl); pwm_config(pb->pwm, 0, pb->period); pwm_disable(pb->pwm); - pwm_put(pb->pwm); if (pb->exit) pb->exit(&pdev->dev); return 0; diff --git a/drivers/video/backlight/tps65217_bl.c b/drivers/video/backlight/tps65217_bl.c new file mode 100644 index 000000000000..70881633b45a --- /dev/null +++ b/drivers/video/backlight/tps65217_bl.c @@ -0,0 +1,342 @@ +/* + * tps65217_bl.c + * + * TPS65217 backlight driver + * + * Copyright (C) 2012 Matthias Kaehlcke + * Author: Matthias Kaehlcke <matthias@kaehlcke.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/mfd/tps65217.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +struct tps65217_bl { + struct tps65217 *tps; + struct device *dev; + struct backlight_device *bl; + bool is_enabled; +}; + +static int tps65217_bl_enable(struct tps65217_bl *tps65217_bl) +{ + int rc; + + rc = tps65217_set_bits(tps65217_bl->tps, TPS65217_REG_WLEDCTRL1, + TPS65217_WLEDCTRL1_ISINK_ENABLE, + TPS65217_WLEDCTRL1_ISINK_ENABLE, TPS65217_PROTECT_NONE); + if (rc) { + dev_err(tps65217_bl->dev, + "failed to enable backlight: %d\n", rc); + return rc; + } + + tps65217_bl->is_enabled = true; + + dev_dbg(tps65217_bl->dev, "backlight enabled\n"); + + return 0; +} + +static int tps65217_bl_disable(struct tps65217_bl *tps65217_bl) +{ + int rc; + + rc = tps65217_clear_bits(tps65217_bl->tps, + TPS65217_REG_WLEDCTRL1, + TPS65217_WLEDCTRL1_ISINK_ENABLE, + TPS65217_PROTECT_NONE); + if (rc) { + dev_err(tps65217_bl->dev, + "failed to disable backlight: %d\n", rc); + return rc; + } + + tps65217_bl->is_enabled = false; + + dev_dbg(tps65217_bl->dev, "backlight disabled\n"); + + return 0; +} + +static int tps65217_bl_update_status(struct backlight_device *bl) +{ + struct tps65217_bl *tps65217_bl = bl_get_data(bl); + int rc; + int brightness = bl->props.brightness; + + if (bl->props.state & BL_CORE_SUSPENDED) + brightness = 0; + + if ((bl->props.power != FB_BLANK_UNBLANK) || + (bl->props.fb_blank != FB_BLANK_UNBLANK)) + /* framebuffer in low power mode or blanking active */ + brightness = 0; + + if (brightness > 0) { + rc = tps65217_reg_write(tps65217_bl->tps, + TPS65217_REG_WLEDCTRL2, + brightness - 1, + TPS65217_PROTECT_NONE); + if (rc) { + dev_err(tps65217_bl->dev, + "failed to set brightness level: %d\n", rc); + return rc; + } + + dev_dbg(tps65217_bl->dev, "brightness set to %d\n", brightness); + + if (!tps65217_bl->is_enabled) + rc = tps65217_bl_enable(tps65217_bl); + } else { + rc = tps65217_bl_disable(tps65217_bl); + } + + return rc; +} + +static int tps65217_bl_get_brightness(struct backlight_device *bl) +{ + return bl->props.brightness; +} + +static const struct backlight_ops tps65217_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = tps65217_bl_update_status, + .get_brightness = tps65217_bl_get_brightness +}; + +static int tps65217_bl_hw_init(struct tps65217_bl *tps65217_bl, + struct tps65217_bl_pdata *pdata) +{ + int rc; + + rc = tps65217_bl_disable(tps65217_bl); + if (rc) + return rc; + + switch (pdata->isel) { + case TPS65217_BL_ISET1: + /* select ISET_1 current level */ + rc = tps65217_clear_bits(tps65217_bl->tps, + TPS65217_REG_WLEDCTRL1, + TPS65217_WLEDCTRL1_ISEL, + TPS65217_PROTECT_NONE); + if (rc) { + dev_err(tps65217_bl->dev, + "failed to select ISET1 current level: %d)\n", + rc); + return rc; + } + + dev_dbg(tps65217_bl->dev, "selected ISET1 current level\n"); + + break; + + case TPS65217_BL_ISET2: + /* select ISET2 current level */ + rc = tps65217_set_bits(tps65217_bl->tps, TPS65217_REG_WLEDCTRL1, + TPS65217_WLEDCTRL1_ISEL, + TPS65217_WLEDCTRL1_ISEL, TPS65217_PROTECT_NONE); + if (rc) { + dev_err(tps65217_bl->dev, + "failed to select ISET2 current level: %d\n", + rc); + return rc; + } + + dev_dbg(tps65217_bl->dev, "selected ISET2 current level\n"); + + break; + + default: + dev_err(tps65217_bl->dev, + "invalid value for current level: %d\n", pdata->isel); + return -EINVAL; + } + + /* set PWM frequency */ + rc = tps65217_set_bits(tps65217_bl->tps, + TPS65217_REG_WLEDCTRL1, + TPS65217_WLEDCTRL1_FDIM_MASK, + pdata->fdim, + TPS65217_PROTECT_NONE); + if (rc) { + dev_err(tps65217_bl->dev, + "failed to select PWM dimming frequency: %d\n", + rc); + return rc; + } + + return 0; +} + +#ifdef CONFIG_OF +static struct tps65217_bl_pdata * +tps65217_bl_parse_dt(struct platform_device *pdev) +{ + struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); + struct device_node *node = of_node_get(tps->dev->of_node); + struct tps65217_bl_pdata *pdata, *err; + u32 val; + + node = of_find_node_by_name(node, "backlight"); + if (!node) + return ERR_PTR(-ENODEV); + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, "failed to allocate platform data\n"); + err = ERR_PTR(-ENOMEM); + goto err; + } + + pdata->isel = TPS65217_BL_ISET1; + if (!of_property_read_u32(node, "isel", &val)) { + if (val < TPS65217_BL_ISET1 || + val > TPS65217_BL_ISET2) { + dev_err(&pdev->dev, + "invalid 'isel' value in the device tree\n"); + err = ERR_PTR(-EINVAL); + goto err; + } + + pdata->isel = val; + } + + pdata->fdim = TPS65217_BL_FDIM_200HZ; + if (!of_property_read_u32(node, "fdim", &val)) { + switch (val) { + case 100: + pdata->fdim = TPS65217_BL_FDIM_100HZ; + break; + + case 200: + pdata->fdim = TPS65217_BL_FDIM_200HZ; + break; + + case 500: + pdata->fdim = TPS65217_BL_FDIM_500HZ; + break; + + case 1000: + pdata->fdim = TPS65217_BL_FDIM_1000HZ; + break; + + default: + dev_err(&pdev->dev, + "invalid 'fdim' value in the device tree\n"); + err = ERR_PTR(-EINVAL); + goto err; + } + } + + of_node_put(node); + + return pdata; + +err: + of_node_put(node); + + return err; +} +#else +static struct tps65217_bl_pdata * +tps65217_bl_parse_dt(struct platform_device *pdev) +{ + return NULL; +} +#endif + +static int tps65217_bl_probe(struct platform_device *pdev) +{ + int rc; + struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); + struct tps65217_bl *tps65217_bl; + struct tps65217_bl_pdata *pdata; + struct backlight_properties bl_props; + + if (tps->dev->of_node) { + pdata = tps65217_bl_parse_dt(pdev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } else { + if (!pdev->dev.platform_data) { + dev_err(&pdev->dev, "no platform data provided\n"); + return -EINVAL; + } + + pdata = pdev->dev.platform_data; + } + + tps65217_bl = devm_kzalloc(&pdev->dev, sizeof(*tps65217_bl), + GFP_KERNEL); + if (tps65217_bl == NULL) { + dev_err(&pdev->dev, "allocation of struct tps65217_bl failed\n"); + return -ENOMEM; + } + + tps65217_bl->tps = tps; + tps65217_bl->dev = &pdev->dev; + tps65217_bl->is_enabled = false; + + rc = tps65217_bl_hw_init(tps65217_bl, pdata); + if (rc) + return rc; + + memset(&bl_props, 0, sizeof(struct backlight_properties)); + bl_props.type = BACKLIGHT_RAW; + bl_props.max_brightness = 100; + + tps65217_bl->bl = backlight_device_register(pdev->name, + tps65217_bl->dev, tps65217_bl, + &tps65217_bl_ops, &bl_props); + if (IS_ERR(tps65217_bl->bl)) { + dev_err(tps65217_bl->dev, + "registration of backlight device failed: %d\n", rc); + return PTR_ERR(tps65217_bl->bl); + } + + tps65217_bl->bl->props.brightness = 0; + platform_set_drvdata(pdev, tps65217_bl); + + return 0; +} + +static int tps65217_bl_remove(struct platform_device *pdev) +{ + struct tps65217_bl *tps65217_bl = platform_get_drvdata(pdev); + + backlight_device_unregister(tps65217_bl->bl); + + return 0; +} + +static struct platform_driver tps65217_bl_driver = { + .probe = tps65217_bl_probe, + .remove = tps65217_bl_remove, + .driver = { + .owner = THIS_MODULE, + .name = "tps65217-bl", + }, +}; + +module_platform_driver(tps65217_bl_driver); + +MODULE_DESCRIPTION("TPS65217 Backlight driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Matthias Kaehlcke <matthias@kaehlcke.net>"); |