diff options
Diffstat (limited to 'drivers/video/backlight')
| -rw-r--r-- | drivers/video/backlight/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/video/backlight/Makefile | 1 | ||||
| -rw-r--r-- | drivers/video/backlight/cr_bllcd.c | 264 | ||||
| -rw-r--r-- | drivers/video/backlight/lm3630a_bl.c | 2 | ||||
| -rw-r--r-- | drivers/video/backlight/lp855x_bl.c | 2 | ||||
| -rw-r--r-- | drivers/video/backlight/pwm_bl.c | 12 |
6 files changed, 8 insertions, 280 deletions
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 51387b1ef012..94d092091b5e 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -235,13 +235,6 @@ config BACKLIGHT_HP700 If you have an HP Jornada 700 series, say Y to include backlight control driver. -config BACKLIGHT_CARILLO_RANCH - tristate "Intel Carillo Ranch Backlight Driver" - depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578 - help - If you have a Intel LE80578 (Carillo Ranch) say Y to enable the - backlight driver. - config BACKLIGHT_PWM tristate "Generic PWM based Backlight Driver" depends on PWM diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index f72e1c3c59e9..67d3ff39be3c 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -25,7 +25,6 @@ obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o obj-$(CONFIG_BACKLIGHT_APPLE) += apple_bl.o obj-$(CONFIG_BACKLIGHT_AS3711) += as3711_bl.o obj-$(CONFIG_BACKLIGHT_BD6107) += bd6107.o -obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o obj-$(CONFIG_BACKLIGHT_DA9052) += da9052_bl.o diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c deleted file mode 100644 index 781aeecc451d..000000000000 --- a/drivers/video/backlight/cr_bllcd.c +++ /dev/null @@ -1,264 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (c) Intel Corp. 2007. - * All Rights Reserved. - * - * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to - * develop this driver. - * - * This file is part of the Carillo Ranch video subsystem driver. - * - * Authors: - * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com> - * Alan Hourihane <alanh-at-tungstengraphics-dot-com> - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mutex.h> -#include <linux/fb.h> -#include <linux/backlight.h> -#include <linux/lcd.h> -#include <linux/pci.h> -#include <linux/slab.h> - -/* The LVDS- and panel power controls sits on the - * GPIO port of the ISA bridge. - */ - -#define CRVML_DEVICE_LPC 0x27B8 -#define CRVML_REG_GPIOBAR 0x48 -#define CRVML_REG_GPIOEN 0x4C -#define CRVML_GPIOEN_BIT (1 << 4) -#define CRVML_PANEL_PORT 0x38 -#define CRVML_LVDS_ON 0x00000001 -#define CRVML_PANEL_ON 0x00000002 -#define CRVML_BACKLIGHT_OFF 0x00000004 - -/* The PLL Clock register sits on Host bridge */ -#define CRVML_DEVICE_MCH 0x5001 -#define CRVML_REG_MCHBAR 0x44 -#define CRVML_REG_MCHEN 0x54 -#define CRVML_MCHEN_BIT (1 << 28) -#define CRVML_MCHMAP_SIZE 4096 -#define CRVML_REG_CLOCK 0xc3c -#define CRVML_CLOCK_SHIFT 8 -#define CRVML_CLOCK_MASK 0x00000f00 - -static struct pci_dev *lpc_dev; -static u32 gpio_bar; - -struct cr_panel { - struct backlight_device *cr_backlight_device; - struct lcd_device *cr_lcd_device; -}; - -static int cr_backlight_set_intensity(struct backlight_device *bd) -{ - u32 addr = gpio_bar + CRVML_PANEL_PORT; - u32 cur = inl(addr); - - if (backlight_get_brightness(bd) == 0) { - /* OFF */ - cur |= CRVML_BACKLIGHT_OFF; - outl(cur, addr); - } else { - /* FULL ON */ - cur &= ~CRVML_BACKLIGHT_OFF; - outl(cur, addr); - } - - return 0; -} - -static int cr_backlight_get_intensity(struct backlight_device *bd) -{ - u32 addr = gpio_bar + CRVML_PANEL_PORT; - u32 cur = inl(addr); - u8 intensity; - - if (cur & CRVML_BACKLIGHT_OFF) - intensity = 0; - else - intensity = 1; - - return intensity; -} - -static const struct backlight_ops cr_backlight_ops = { - .get_brightness = cr_backlight_get_intensity, - .update_status = cr_backlight_set_intensity, -}; - -static void cr_panel_on(void) -{ - u32 addr = gpio_bar + CRVML_PANEL_PORT; - u32 cur = inl(addr); - - if (!(cur & CRVML_PANEL_ON)) { - /* Make sure LVDS controller is down. */ - if (cur & 0x00000001) { - cur &= ~CRVML_LVDS_ON; - outl(cur, addr); - } - /* Power up Panel */ - schedule_timeout(HZ / 10); - cur |= CRVML_PANEL_ON; - outl(cur, addr); - } - - /* Power up LVDS controller */ - - if (!(cur & CRVML_LVDS_ON)) { - schedule_timeout(HZ / 10); - outl(cur | CRVML_LVDS_ON, addr); - } -} - -static void cr_panel_off(void) -{ - u32 addr = gpio_bar + CRVML_PANEL_PORT; - u32 cur = inl(addr); - - /* Power down LVDS controller first to avoid high currents */ - if (cur & CRVML_LVDS_ON) { - cur &= ~CRVML_LVDS_ON; - outl(cur, addr); - } - if (cur & CRVML_PANEL_ON) { - schedule_timeout(HZ / 10); - outl(cur & ~CRVML_PANEL_ON, addr); - } -} - -static int cr_lcd_set_power(struct lcd_device *ld, int power) -{ - if (power == FB_BLANK_UNBLANK) - cr_panel_on(); - if (power == FB_BLANK_POWERDOWN) - cr_panel_off(); - - return 0; -} - -static struct lcd_ops cr_lcd_ops = { - .set_power = cr_lcd_set_power, -}; - -static int cr_backlight_probe(struct platform_device *pdev) -{ - struct backlight_properties props; - struct backlight_device *bdp; - struct lcd_device *ldp; - struct cr_panel *crp; - u8 dev_en; - - lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL, - CRVML_DEVICE_LPC, NULL); - if (!lpc_dev) { - pr_err("INTEL CARILLO RANCH LPC not found.\n"); - return -ENODEV; - } - - pci_read_config_byte(lpc_dev, CRVML_REG_GPIOEN, &dev_en); - if (!(dev_en & CRVML_GPIOEN_BIT)) { - pr_err("Carillo Ranch GPIO device was not enabled.\n"); - pci_dev_put(lpc_dev); - return -ENODEV; - } - - memset(&props, 0, sizeof(struct backlight_properties)); - props.type = BACKLIGHT_RAW; - bdp = devm_backlight_device_register(&pdev->dev, "cr-backlight", - &pdev->dev, NULL, &cr_backlight_ops, - &props); - if (IS_ERR(bdp)) { - pci_dev_put(lpc_dev); - return PTR_ERR(bdp); - } - - ldp = devm_lcd_device_register(&pdev->dev, "cr-lcd", &pdev->dev, NULL, - &cr_lcd_ops); - if (IS_ERR(ldp)) { - pci_dev_put(lpc_dev); - return PTR_ERR(ldp); - } - - pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR, - &gpio_bar); - gpio_bar &= ~0x3F; - - crp = devm_kzalloc(&pdev->dev, sizeof(*crp), GFP_KERNEL); - if (!crp) { - pci_dev_put(lpc_dev); - return -ENOMEM; - } - - crp->cr_backlight_device = bdp; - crp->cr_lcd_device = ldp; - crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK; - crp->cr_backlight_device->props.brightness = 0; - cr_backlight_set_intensity(crp->cr_backlight_device); - cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK); - - platform_set_drvdata(pdev, crp); - - return 0; -} - -static void cr_backlight_remove(struct platform_device *pdev) -{ - struct cr_panel *crp = platform_get_drvdata(pdev); - - crp->cr_backlight_device->props.power = FB_BLANK_POWERDOWN; - crp->cr_backlight_device->props.brightness = 0; - crp->cr_backlight_device->props.max_brightness = 0; - cr_backlight_set_intensity(crp->cr_backlight_device); - cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN); - pci_dev_put(lpc_dev); -} - -static struct platform_driver cr_backlight_driver = { - .probe = cr_backlight_probe, - .remove_new = cr_backlight_remove, - .driver = { - .name = "cr_backlight", - }, -}; - -static struct platform_device *crp; - -static int __init cr_backlight_init(void) -{ - int ret = platform_driver_register(&cr_backlight_driver); - - if (ret) - return ret; - - crp = platform_device_register_simple("cr_backlight", -1, NULL, 0); - if (IS_ERR(crp)) { - platform_driver_unregister(&cr_backlight_driver); - return PTR_ERR(crp); - } - - pr_info("Carillo Ranch Backlight Driver Initialized.\n"); - - return 0; -} - -static void __exit cr_backlight_exit(void) -{ - platform_device_unregister(crp); - platform_driver_unregister(&cr_backlight_driver); -} - -module_init(cr_backlight_init); -module_exit(cr_backlight_exit); - -MODULE_AUTHOR("Tungsten Graphics Inc."); -MODULE_DESCRIPTION("Carillo Ranch Backlight Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c index 8fcb62be597b..a3412c936ca2 100644 --- a/drivers/video/backlight/lm3630a_bl.c +++ b/drivers/video/backlight/lm3630a_bl.c @@ -180,7 +180,7 @@ static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max) pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false; - return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state); + return pwm_apply_might_sleep(pchip->pwmd, &pchip->pwmd_state); } /* update and get brightness */ diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c index da1f124db69c..7075bfab59c4 100644 --- a/drivers/video/backlight/lp855x_bl.c +++ b/drivers/video/backlight/lp855x_bl.c @@ -234,7 +234,7 @@ static int lp855x_pwm_ctrl(struct lp855x *lp, int br, int max_br) state.duty_cycle = div_u64(br * state.period, max_br); state.enabled = state.duty_cycle; - return pwm_apply_state(lp->pwm, &state); + return pwm_apply_might_sleep(lp->pwm, &state); } static int lp855x_bl_update_status(struct backlight_device *bl) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 289bd9ce4d36..35c716e9043c 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -103,7 +103,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl) pwm_get_state(pb->pwm, &state); state.duty_cycle = compute_duty_cycle(pb, brightness, &state); state.enabled = true; - pwm_apply_state(pb->pwm, &state); + pwm_apply_might_sleep(pb->pwm, &state); pwm_backlight_power_on(pb); } else { @@ -120,7 +120,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl) * inactive output. */ state.enabled = !pb->power_supply && !pb->enable_gpio; - pwm_apply_state(pb->pwm, &state); + pwm_apply_might_sleep(pb->pwm, &state); } if (pb->notify_after) @@ -528,7 +528,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) if (!state.period && (data->pwm_period_ns > 0)) state.period = data->pwm_period_ns; - ret = pwm_apply_state(pb->pwm, &state); + ret = pwm_apply_might_sleep(pb->pwm, &state); if (ret) { dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n", ret); @@ -633,7 +633,7 @@ static void pwm_backlight_remove(struct platform_device *pdev) pwm_get_state(pb->pwm, &state); state.duty_cycle = 0; state.enabled = false; - pwm_apply_state(pb->pwm, &state); + pwm_apply_might_sleep(pb->pwm, &state); if (pb->exit) pb->exit(&pdev->dev); @@ -649,7 +649,7 @@ static void pwm_backlight_shutdown(struct platform_device *pdev) pwm_get_state(pb->pwm, &state); state.duty_cycle = 0; state.enabled = false; - pwm_apply_state(pb->pwm, &state); + pwm_apply_might_sleep(pb->pwm, &state); } #ifdef CONFIG_PM_SLEEP @@ -673,7 +673,7 @@ static int pwm_backlight_suspend(struct device *dev) pwm_get_state(pb->pwm, &state); state.duty_cycle = 0; state.enabled = false; - pwm_apply_state(pb->pwm, &state); + pwm_apply_might_sleep(pb->pwm, &state); if (pb->notify_after) pb->notify_after(pb->dev, 0); |