summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog/i6300esb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/watchdog/i6300esb.c')
-rw-r--r--drivers/watchdog/i6300esb.c132
1 files changed, 71 insertions, 61 deletions
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index 8a0ef65a0691..7ba0b11ec525 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -123,7 +123,7 @@ static int esb_timer_start(void)
esb_unlock_registers();
writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
/* Enable or Enable + Lock? */
- val = 0x02 | (nowayout ? 0x01 : 0x00);
+ val = ESB_WDT_ENABLE | (nowayout ? ESB_WDT_LOCK : 0x00);
pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
spin_unlock(&esb_lock);
return 0;
@@ -143,7 +143,7 @@ static int esb_timer_stop(void)
spin_unlock(&esb_lock);
/* Returns 0 if the timer was disabled, non-zero otherwise */
- return val & 0x01;
+ return val & ESB_WDT_ENABLE;
}
static void esb_timer_keepalive(void)
@@ -350,8 +350,6 @@ MODULE_DEVICE_TABLE(pci, esb_pci_tbl);
static unsigned char __devinit esb_getdevice(void)
{
- u8 val1;
- unsigned short val2;
/*
* Find the PCI device
*/
@@ -359,67 +357,79 @@ static unsigned char __devinit esb_getdevice(void)
esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_ESB_9, NULL);
- if (esb_pci) {
- if (pci_enable_device(esb_pci)) {
- printk(KERN_ERR PFX "failed to enable device\n");
- goto err_devput;
- }
+ if (!esb_pci)
+ return 0;
- if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
- printk(KERN_ERR PFX "failed to request region\n");
- goto err_disable;
- }
+ if (pci_enable_device(esb_pci)) {
+ printk(KERN_ERR PFX "failed to enable device\n");
+ goto err_devput;
+ }
- BASEADDR = pci_ioremap_bar(esb_pci, 0);
- if (BASEADDR == NULL) {
- /* Something's wrong here, BASEADDR has to be set */
- printk(KERN_ERR PFX "failed to get BASEADDR\n");
- goto err_release;
- }
+ if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
+ printk(KERN_ERR PFX "failed to request region\n");
+ goto err_disable;
+ }
- /*
- * The watchdog has two timers, it can be setup so that the
- * expiry of timer1 results in an interrupt and the expiry of
- * timer2 results in a reboot. We set it to not generate
- * any interrupts as there is not much we can do with it
- * right now.
- *
- * We also enable reboots and set the timer frequency to
- * the PCI clock divided by 2^15 (approx 1KHz).
- */
- pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
-
- /* Check that the WDT isn't already locked */
- pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
- if (val1 & ESB_WDT_LOCK)
- printk(KERN_WARNING PFX "nowayout already set\n");
-
- /* Set the timer to watchdog mode and disable it for now */
- pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
-
- /* Check if the watchdog was previously triggered */
- esb_unlock_registers();
- val2 = readw(ESB_RELOAD_REG);
- if (val2 & ESB_WDT_TIMEOUT)
- triggered = WDIOF_CARDRESET;
-
- /* Reset trigger flag and timers */
- esb_unlock_registers();
- writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG);
-
- /* Done */
- return 1;
+ BASEADDR = pci_ioremap_bar(esb_pci, 0);
+ if (BASEADDR == NULL) {
+ /* Something's wrong here, BASEADDR has to be set */
+ printk(KERN_ERR PFX "failed to get BASEADDR\n");
+ goto err_release;
+ }
+
+ /* Done */
+ return 1;
err_release:
- pci_release_region(esb_pci, 0);
+ pci_release_region(esb_pci, 0);
err_disable:
- pci_disable_device(esb_pci);
+ pci_disable_device(esb_pci);
err_devput:
- pci_dev_put(esb_pci);
- }
+ pci_dev_put(esb_pci);
return 0;
}
+static void __devinit esb_initdevice(void)
+{
+ u8 val1;
+ u16 val2;
+
+ /*
+ * Config register:
+ * Bit 5 : 0 = Enable WDT_OUTPUT
+ * Bit 2 : 0 = set the timer frequency to the PCI clock
+ * divided by 2^15 (approx 1KHz).
+ * Bits 1:0 : 11 = WDT_INT_TYPE Disabled.
+ * The watchdog has two timers, it can be setup so that the
+ * expiry of timer1 results in an interrupt and the expiry of
+ * timer2 results in a reboot. We set it to not generate
+ * any interrupts as there is not much we can do with it
+ * right now.
+ */
+ pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
+
+ /* Check that the WDT isn't already locked */
+ pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
+ if (val1 & ESB_WDT_LOCK)
+ printk(KERN_WARNING PFX "nowayout already set\n");
+
+ /* Set the timer to watchdog mode and disable it for now */
+ pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
+
+ /* Check if the watchdog was previously triggered */
+ esb_unlock_registers();
+ val2 = readw(ESB_RELOAD_REG);
+ if (val2 & ESB_WDT_TIMEOUT)
+ triggered = WDIOF_CARDRESET;
+
+ /* Reset WDT_TIMEOUT flag and timers */
+ esb_unlock_registers();
+ writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG);
+
+ /* And set the correct timeout value */
+ esb_timer_set_heartbeat(heartbeat);
+}
+
static int __devinit esb_probe(struct platform_device *dev)
{
int ret;
@@ -430,13 +440,17 @@ static int __devinit esb_probe(struct platform_device *dev)
/* Check that the heartbeat value is within it's range;
if not reset to the default */
- if (esb_timer_set_heartbeat(heartbeat)) {
- esb_timer_set_heartbeat(WATCHDOG_HEARTBEAT);
+ if (heartbeat < 0x1 || heartbeat > 2 * 0x03ff) {
+ heartbeat = WATCHDOG_HEARTBEAT;
printk(KERN_INFO PFX
"heartbeat value must be 1<heartbeat<2046, using %d\n",
heartbeat);
}
+ /* Initialize the watchdog and make sure it does not run */
+ esb_initdevice();
+
+ /* Register the watchdog so that userspace has access to it */
ret = misc_register(&esb_miscdev);
if (ret != 0) {
printk(KERN_ERR PFX
@@ -444,7 +458,6 @@ static int __devinit esb_probe(struct platform_device *dev)
WATCHDOG_MINOR, ret);
goto err_unmap;
}
- esb_timer_stop();
printk(KERN_INFO PFX
"initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
BASEADDR, heartbeat, nowayout);
@@ -452,11 +465,8 @@ static int __devinit esb_probe(struct platform_device *dev)
err_unmap:
iounmap(BASEADDR);
-/* err_release: */
pci_release_region(esb_pci, 0);
-/* err_disable: */
pci_disable_device(esb_pci);
-/* err_devput: */
pci_dev_put(esb_pci);
return ret;
}