summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/char/agp/parisc-agp.c2
-rw-r--r--drivers/net/Kconfig6
-rw-r--r--drivers/net/lasi_82596.c34
-rw-r--r--drivers/parisc/hppb.c14
-rw-r--r--drivers/parisc/iosapic_private.h2
-rw-r--r--drivers/parisc/lba_pci.c34
-rw-r--r--drivers/parisc/led.c12
-rw-r--r--drivers/parisc/power.c4
-rw-r--r--drivers/parisc/sba_iommu.c4
-rw-r--r--drivers/serial/mux.c167
10 files changed, 180 insertions, 99 deletions
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index 17c50b0f83f0..30cc7aeae9ab 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -235,7 +235,7 @@ static int __init
agp_ioc_init(void __iomem *ioc_regs)
{
struct _parisc_agp_info *info = &parisc_agp_info;
- u64 *iova_base, *io_pdir, io_tlb_ps;
+ u64 iova_base, *io_pdir, io_tlb_ps;
int io_tlb_shift;
printk(KERN_INFO DRVPFX "IO PDIR shared with sba_iommu\n");
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8aa8dd02b910..79eade7e9d91 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -440,10 +440,10 @@ config HPLANCE
config LASI_82596
tristate "Lasi ethernet"
- depends on NET_ETHERNET && PARISC && GSC_LASI
+ depends on NET_ETHERNET && GSC
help
- Say Y here to support the on-board Intel 82596 ethernet controller
- built into Hewlett-Packard PA-RISC machines.
+ Say Y here to support the builtin Intel 82596 ethernet controller
+ found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
config MIPS_JAZZ_SONIC
tristate "MIPS JAZZ onboard SONIC Ethernet support"
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index ea392f2a5aa2..452863d5d498 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -384,7 +384,7 @@ struct i596_private {
struct device *dev;
};
-static char init_setup[] =
+static const char init_setup[] =
{
0x8E, /* length, prefetch on */
0xC8, /* fifo to 8, monitor off */
@@ -683,7 +683,7 @@ static int init_i596_mem(struct net_device *dev)
enable_irq(dev->irq); /* enable IRQs from LAN */
DEB(DEB_INIT, printk("%s: queuing CmdConfigure\n", dev->name));
- memcpy(lp->cf_cmd.i596_config, init_setup, 14);
+ memcpy(lp->cf_cmd.i596_config, init_setup, sizeof(init_setup));
lp->cf_cmd.cmd.command = CmdConfigure;
CHECK_WBACK(lp, &(lp->cf_cmd), sizeof(struct cf_cmd));
i596_add_cmd(dev, &lp->cf_cmd.cmd);
@@ -1156,32 +1156,12 @@ static int __devinit i82596_probe(struct net_device *dev,
dma_addr_t dma_addr;
/* This lot is ensure things have been cache line aligned. */
- if (sizeof(struct i596_rfd) != 32) {
- printk("82596: sizeof(struct i596_rfd) = %d\n",
- (int)sizeof(struct i596_rfd));
- return -ENODEV;
- }
- if ((sizeof(struct i596_rbd) % 32) != 0) {
- printk("82596: sizeof(struct i596_rbd) = %d\n",
- (int)sizeof(struct i596_rbd));
- return -ENODEV;
- }
- if ((sizeof(struct tx_cmd) % 32) != 0) {
- printk("82596: sizeof(struct tx_cmd) = %d\n",
- (int)sizeof(struct tx_cmd));
- return -ENODEV;
- }
- if (sizeof(struct i596_tbd) != 32) {
- printk("82596: sizeof(struct i596_tbd) = %d\n",
- (int)sizeof(struct i596_tbd));
- return -ENODEV;
- }
+ BUILD_BUG_ON(sizeof(struct i596_rfd) != 32);
+ BUILD_BUG_ON(sizeof(struct i596_rbd) & 31);
+ BUILD_BUG_ON(sizeof(struct tx_cmd) & 31);
+ BUILD_BUG_ON(sizeof(struct i596_tbd) != 32);
#ifndef __LP64__
- if (sizeof(struct i596_private) > 4096) {
- printk("82596: sizeof(struct i596_private) = %d\n",
- (int)sizeof(struct i596_private));
- return -ENODEV;
- }
+ BUILD_BUG_ON(sizeof(struct i596_private) > 4096);
#endif
if (!dev->base_addr || !dev->irq)
diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c
index 07dc2b6d4e93..9bb4db552f3c 100644
--- a/drivers/parisc/hppb.c
+++ b/drivers/parisc/hppb.c
@@ -10,10 +10,6 @@
** the Free Software Foundation; either version 2 of the License, or
** (at your option) any later version.
**
-** This Driver currently only supports the console (port 0) on the MUX.
-** Additional work will be needed on this driver to enable the full
-** functionality of the MUX.
-**
*/
#include <linux/types.h>
@@ -67,7 +63,7 @@ static int hppb_probe(struct parisc_device *dev)
}
card = card->next;
}
- printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa.start);
+ printk(KERN_INFO "Found GeckoBoa at 0x%x\n", dev->hpa.start);
card->hpa = dev->hpa.start;
card->mmio_region.name = "HP-PB Bus";
@@ -78,16 +74,18 @@ static int hppb_probe(struct parisc_device *dev)
status = ccio_request_resource(dev, &card->mmio_region);
if(status < 0) {
- printk(KERN_ERR "%s: failed to claim HP-PB bus space (%08lx, %08lx)\n",
+ printk(KERN_ERR "%s: failed to claim HP-PB bus space (%08x, %08x)\n",
__FILE__, card->mmio_region.start, card->mmio_region.end);
}
return 0;
}
-
static struct parisc_device_id hppb_tbl[] = {
- { HPHW_BCPORT, HVERSION_REV_ANY_ID, 0x500, 0xc },
+ { HPHW_BCPORT, HVERSION_REV_ANY_ID, 0x500, 0xc }, /* E25 and K */
+ { HPHW_BCPORT, 0x0, 0x501, 0xc }, /* E35 */
+ { HPHW_BCPORT, 0x0, 0x502, 0xc }, /* E45 */
+ { HPHW_BCPORT, 0x0, 0x503, 0xc }, /* E55 */
{ 0, }
};
diff --git a/drivers/parisc/iosapic_private.h b/drivers/parisc/iosapic_private.h
index 41e7ec2a44aa..6e05e30a2450 100644
--- a/drivers/parisc/iosapic_private.h
+++ b/drivers/parisc/iosapic_private.h
@@ -132,7 +132,7 @@ struct iosapic_irt {
struct vector_info {
struct iosapic_info *iosapic; /* I/O SAPIC this vector is on */
struct irt_entry *irte; /* IRT entry */
- u32 *eoi_addr; /* precalculate EOI reg address */
+ u32 __iomem *eoi_addr; /* precalculate EOI reg address */
u32 eoi_data; /* IA64: ? PA: swapped txn_data */
int txn_irq; /* virtual IRQ number for processor */
ulong txn_addr; /* IA64: id_eid PA: partial HPA */
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index ba6769934c77..eae0812f01a5 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -980,7 +980,7 @@ LBA_PORT_IN(32, 0)
#define LBA_PORT_OUT(size, mask) \
static void lba_pat_out##size (struct pci_hba_data *l, u16 addr, u##size val) \
{ \
- void *where = (void *) PIOP_TO_GMMIO(LBA_DEV(l), addr); \
+ void __iomem *where = PIOP_TO_GMMIO(LBA_DEV(l), addr); \
DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __FUNCTION__, l, addr, val); \
WRITE_REG##size(val, where); \
/* flush the I/O down to the elroy at least */ \
@@ -1406,13 +1406,20 @@ lba_hw_init(struct lba_device *d)
return 0;
}
-
+/*
+ * Unfortunately, when firmware numbers busses, it doesn't take into account
+ * Cardbus bridges. So we have to renumber the busses to suit ourselves.
+ * Elroy/Mercury don't actually know what bus number they're attached to;
+ * we use bus 0 to indicate the directly attached bus and any other bus
+ * number will be taken care of by the PCI-PCI bridge.
+ */
+static unsigned int lba_next_bus = 0;
/*
-** Determine if lba should claim this chip (return 0) or not (return 1).
-** If so, initialize the chip and tell other partners in crime they
-** have work to do.
-*/
+ * Determine if lba should claim this chip (return 0) or not (return 1).
+ * If so, initialize the chip and tell other partners in crime they
+ * have work to do.
+ */
static int __init
lba_driver_probe(struct parisc_device *dev)
{
@@ -1478,9 +1485,7 @@ lba_driver_probe(struct parisc_device *dev)
return -ENODEV;
}
- /*
- ** Tell I/O SAPIC driver we have a IRQ handler/region.
- */
+ /* Tell I/O SAPIC driver we have a IRQ handler/region. */
tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE);
/* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't
@@ -1529,16 +1534,17 @@ lba_driver_probe(struct parisc_device *dev)
lba_legacy_resources(dev, lba_dev);
}
- /*
- ** Tell PCI support another PCI bus was found.
- ** Walks PCI bus for us too.
- */
+ if (lba_dev->hba.bus_num.start < lba_next_bus)
+ lba_dev->hba.bus_num.start = lba_next_bus;
+
dev->dev.platform_data = lba_dev;
lba_bus = lba_dev->hba.hba_bus =
pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start,
cfg_ops, NULL);
- if (lba_bus)
+ if (lba_bus) {
+ lba_next_bus = lba_bus->subordinate + 1;
pci_bus_add_devices(lba_bus);
+ }
/* This is in lieu of calling pci_assign_unassigned_resources() */
if (is_pdc_pat()) {
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 8dac2ba82bb9..6818c10c0c46 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -66,8 +66,8 @@ static char lcd_text_default[32] __read_mostly;
static struct workqueue_struct *led_wq;
-static void led_work_func(void *);
-static DECLARE_WORK(led_task, led_work_func, NULL);
+static void led_work_func(struct work_struct *);
+static DECLARE_DELAYED_WORK(led_task, led_work_func);
#if 0
#define DPRINTK(x) printk x
@@ -136,7 +136,7 @@ static int start_task(void)
/* Create the work queue and queue the LED task */
led_wq = create_singlethread_workqueue("led_wq");
- queue_work(led_wq, &led_task);
+ queue_delayed_work(led_wq, &led_task, 0);
return 0;
}
@@ -443,7 +443,7 @@ static __inline__ int led_get_diskio_activity(void)
#define LED_UPDATE_INTERVAL (1 + (HZ*19/1000))
-static void led_work_func (void *unused)
+static void led_work_func (struct work_struct *unused)
{
static unsigned long last_jiffies;
static unsigned long count_HZ; /* counter in range 0..HZ */
@@ -590,7 +590,7 @@ int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long d
/* Ensure the work is queued */
if (led_wq) {
- queue_work(led_wq, &led_task);
+ queue_delayed_work(led_wq, &led_task, 0);
}
return 0;
@@ -660,7 +660,7 @@ int lcd_print( char *str )
/* re-queue the work */
if (led_wq) {
- queue_work(led_wq, &led_task);
+ queue_delayed_work(led_wq, &led_task, 0);
}
return lcd_info.lcd_width;
diff --git a/drivers/parisc/power.c b/drivers/parisc/power.c
index 97e9dc066f95..9228e210c3bb 100644
--- a/drivers/parisc/power.c
+++ b/drivers/parisc/power.c
@@ -82,7 +82,7 @@
} )
-static void deferred_poweroff(void *dummy)
+static void deferred_poweroff(struct work_struct *unused)
{
if (kill_cad_pid(SIGINT, 1)) {
/* just in case killing init process failed */
@@ -96,7 +96,7 @@ static void deferred_poweroff(void *dummy)
* use schedule_work().
*/
-static DECLARE_WORK(poweroff_work, deferred_poweroff, NULL);
+static DECLARE_WORK(poweroff_work, deferred_poweroff);
static void poweroff(void)
{
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index f1e7ccd5475b..26fece45e737 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -109,7 +109,7 @@ static unsigned long piranha_bad_128k = 0;
#ifdef SBA_AGP_SUPPORT
static int sba_reserve_agpgart = 1;
-module_param(sba_reserve_agpgart, int, 1);
+module_param(sba_reserve_agpgart, int, 0444);
MODULE_PARM_DESC(sba_reserve_agpgart, "Reserve half of IO pdir as AGPGART");
#endif
@@ -846,7 +846,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size,
if (!hwdev) {
/* only support PCI */
*dma_handle = 0;
- return 0;
+ return NULL;
}
ret = (void *) __get_free_pages(gfp, get_order(size));
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index ccb8fa1800a5..83211013deb8 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -51,7 +51,11 @@
#define MUX_NR 256
static unsigned int port_cnt __read_mostly;
-static struct uart_port mux_ports[MUX_NR];
+struct mux_port {
+ struct uart_port port;
+ int enabled;
+};
+static struct mux_port mux_ports[MUX_NR];
static struct uart_driver mux_driver = {
.owner = THIS_MODULE,
@@ -66,7 +70,36 @@ static struct timer_list mux_timer;
#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET)
#define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET)
-#define GET_MUX_PORTS(iodc_data) ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8
+
+/**
+ * get_mux_port_count - Get the number of available ports on the Mux.
+ * @dev: The parisc device.
+ *
+ * This function is used to determine the number of ports the Mux
+ * supports. The IODC data reports the number of ports the Mux
+ * can support, but there are cases where not all the Mux ports
+ * are connected. This function can override the IODC and
+ * return the true port count.
+ */
+static int __init get_mux_port_count(struct parisc_device *dev)
+{
+ int status;
+ u8 iodc_data[32];
+ unsigned long bytecnt;
+
+ /* If this is the built-in Mux for the K-Class (Eole CAP/MUX),
+ * we only need to allocate resources for 1 port since the
+ * other 7 ports are not connected.
+ */
+ if(dev->id.hversion == 0x15)
+ return 1;
+
+ status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32);
+ BUG_ON(status != PDC_OK);
+
+ /* Return the number of ports specified in the iodc data. */
+ return ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8;
+}
/**
* mux_tx_empty - Check if the transmitter fifo is empty.
@@ -250,7 +283,7 @@ static void mux_read(struct uart_port *port)
*/
static int mux_startup(struct uart_port *port)
{
- mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
+ mux_ports[port->line].enabled = 1;
return 0;
}
@@ -262,6 +295,7 @@ static int mux_startup(struct uart_port *port)
*/
static void mux_shutdown(struct uart_port *port)
{
+ mux_ports[port->line].enabled = 0;
}
/**
@@ -319,7 +353,7 @@ static int mux_request_port(struct uart_port *port)
* @port: Ptr to the uart_port.
* @type: Bitmask of required configurations.
*
- * Perform any autoconfiguration steps for the port. This functino is
+ * Perform any autoconfiguration steps for the port. This function is
* called if the UPF_BOOT_AUTOCONF flag is specified for the port.
* [Note: This is required for now because of a bug in the Serial core.
* rmk has already submitted a patch to linus, should be available for
@@ -357,11 +391,11 @@ static void mux_poll(unsigned long unused)
int i;
for(i = 0; i < port_cnt; ++i) {
- if(!mux_ports[i].info)
+ if(!mux_ports[i].enabled)
continue;
- mux_read(&mux_ports[i]);
- mux_write(&mux_ports[i]);
+ mux_read(&mux_ports[i].port);
+ mux_write(&mux_ports[i].port);
}
mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
@@ -371,8 +405,17 @@ static void mux_poll(unsigned long unused)
#ifdef CONFIG_SERIAL_MUX_CONSOLE
static void mux_console_write(struct console *co, const char *s, unsigned count)
{
- while(count--)
- pdc_iodc_putc(*s++);
+ /* Wait until the FIFO drains. */
+ while(UART_GET_FIFO_CNT(&mux_ports[0].port))
+ udelay(1);
+
+ while(count--) {
+ if(*s == '\n') {
+ UART_PUT_CHAR(&mux_ports[0].port, '\r');
+ }
+ UART_PUT_CHAR(&mux_ports[0].port, *s++);
+ }
+
}
static int mux_console_setup(struct console *co, char *options)
@@ -428,19 +471,14 @@ static struct uart_ops mux_pops = {
*/
static int __init mux_probe(struct parisc_device *dev)
{
- int i, status, ports;
- u8 iodc_data[32];
- unsigned long bytecnt;
- struct uart_port *port;
+ int i, status;
- status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32);
- if(status != PDC_OK) {
- printk(KERN_ERR "Serial mux: Unable to read IODC.\n");
- return 1;
- }
+ int port_count = get_mux_port_count(dev);
+ printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count);
- ports = GET_MUX_PORTS(iodc_data);
- printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.3\n", ports);
+ dev_set_drvdata(&dev->dev, (void *)(long)port_count);
+ request_mem_region(dev->hpa.start + MUX_OFFSET,
+ port_count * MUX_LINE_OFFSET, "Mux");
if(!port_cnt) {
mux_driver.cons = MUX_CONSOLE;
@@ -450,13 +488,10 @@ static int __init mux_probe(struct parisc_device *dev)
printk(KERN_ERR "Serial mux: Unable to register driver.\n");
return 1;
}
-
- init_timer(&mux_timer);
- mux_timer.function = mux_poll;
}
- for(i = 0; i < ports; ++i, ++port_cnt) {
- port = &mux_ports[port_cnt];
+ for(i = 0; i < port_count; ++i, ++port_cnt) {
+ struct uart_port *port = &mux_ports[port_cnt].port;
port->iobase = 0;
port->mapbase = dev->hpa.start + MUX_OFFSET +
(i * MUX_LINE_OFFSET);
@@ -477,27 +512,73 @@ static int __init mux_probe(struct parisc_device *dev)
*/
port->timeout = HZ / 50;
spin_lock_init(&port->lock);
+
status = uart_add_one_port(&mux_driver, port);
BUG_ON(status);
}
-#ifdef CONFIG_SERIAL_MUX_CONSOLE
- register_console(&mux_console);
-#endif
return 0;
}
+static int __devexit mux_remove(struct parisc_device *dev)
+{
+ int i, j;
+ int port_count = (long)dev_get_drvdata(&dev->dev);
+
+ /* Find Port 0 for this card in the mux_ports list. */
+ for(i = 0; i < port_cnt; ++i) {
+ if(mux_ports[i].port.mapbase == dev->hpa.start + MUX_OFFSET)
+ break;
+ }
+ BUG_ON(i + port_count > port_cnt);
+
+ /* Release the resources associated with each port on the device. */
+ for(j = 0; j < port_count; ++j, ++i) {
+ struct uart_port *port = &mux_ports[i].port;
+
+ uart_remove_one_port(&mux_driver, port);
+ if(port->membase)
+ iounmap(port->membase);
+ }
+
+ release_mem_region(dev->hpa.start + MUX_OFFSET, port_count * MUX_LINE_OFFSET);
+ return 0;
+}
+
+/* Hack. This idea was taken from the 8250_gsc.c on how to properly order
+ * the serial port detection in the proper order. The idea is we always
+ * want the builtin mux to be detected before addin mux cards, so we
+ * specifically probe for the builtin mux cards first.
+ *
+ * This table only contains the parisc_device_id of known builtin mux
+ * devices. All other mux cards will be detected by the generic mux_tbl.
+ */
+static struct parisc_device_id builtin_mux_tbl[] = {
+ { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x15, 0x0000D }, /* All K-class */
+ { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x44, 0x0000D }, /* E35, E45, and E55 */
+ { 0, }
+};
+
static struct parisc_device_id mux_tbl[] = {
{ HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D },
{ 0, }
};
+MODULE_DEVICE_TABLE(parisc, builtin_mux_tbl);
MODULE_DEVICE_TABLE(parisc, mux_tbl);
+static struct parisc_driver builtin_serial_mux_driver = {
+ .name = "builtin_serial_mux",
+ .id_table = builtin_mux_tbl,
+ .probe = mux_probe,
+ .remove = __devexit_p(mux_remove),
+};
+
static struct parisc_driver serial_mux_driver = {
.name = "serial_mux",
.id_table = mux_tbl,
.probe = mux_probe,
+ .remove = __devexit_p(mux_remove),
};
/**
@@ -507,7 +588,21 @@ static struct parisc_driver serial_mux_driver = {
*/
static int __init mux_init(void)
{
- return register_parisc_driver(&serial_mux_driver);
+ register_parisc_driver(&builtin_serial_mux_driver);
+ register_parisc_driver(&serial_mux_driver);
+
+ if(port_cnt > 0) {
+ /* Start the Mux timer */
+ init_timer(&mux_timer);
+ mux_timer.function = mux_poll;
+ mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
+
+#ifdef CONFIG_SERIAL_MUX_CONSOLE
+ register_console(&mux_console);
+#endif
+ }
+
+ return 0;
}
/**
@@ -517,14 +612,16 @@ static int __init mux_init(void)
*/
static void __exit mux_exit(void)
{
- int i;
-
- for (i = 0; i < port_cnt; i++) {
- uart_remove_one_port(&mux_driver, &mux_ports[i]);
- if (mux_ports[i].membase)
- iounmap(mux_ports[i].membase);
+ /* Delete the Mux timer. */
+ if(port_cnt > 0) {
+ del_timer(&mux_timer);
+#ifdef CONFIG_SERIAL_MUX_CONSOLE
+ unregister_console(&mux_console);
+#endif
}
+ unregister_parisc_driver(&builtin_serial_mux_driver);
+ unregister_parisc_driver(&serial_mux_driver);
uart_unregister_driver(&mux_driver);
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 11:19:50 +0100