diff options
Diffstat (limited to 'drivers')
46 files changed, 3415 insertions, 198 deletions
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index f4ebe39539af..35e8fbca10ad 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -520,7 +520,8 @@ static void acpi_thermal_check(void *data) if (!tz->tz_enabled) return; - thermal_zone_device_update(tz->thermal_zone); + thermal_zone_device_update(tz->thermal_zone, + THERMAL_EVENT_UNSPECIFIED); } /* sys I/F for generic thermal sysfs support */ diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 460fa6708bfc..2acdb0d6ea89 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -405,7 +405,7 @@ static inline void acerhdf_enable_kernelmode(void) kernelmode = 1; thz_dev->polling_delay = interval*1000; - thermal_zone_device_update(thz_dev); + thermal_zone_device_update(thz_dev, THERMAL_EVENT_UNSPECIFIED); pr_notice("kernel mode fan control ON\n"); } diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c index 3958f50c5975..e0c747aa9f85 100644 --- a/drivers/regulator/max8973-regulator.c +++ b/drivers/regulator/max8973-regulator.c @@ -495,7 +495,8 @@ static irqreturn_t max8973_thermal_irq(int irq, void *data) { struct max8973_chip *mchip = data; - thermal_zone_device_update(mchip->tz_device); + thermal_zone_device_update(mchip->tz_device, + THERMAL_EVENT_UNSPECIFIED); return IRQ_HANDLED; } diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 2d702ca6556f..a13541bdc726 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -186,7 +186,7 @@ config HISI_THERMAL config IMX_THERMAL tristate "Temperature sensor driver for Freescale i.MX SoCs" - depends on CPU_THERMAL + depends on (ARCH_MXC && CPU_THERMAL) || COMPILE_TEST depends on MFD_SYSCON depends on OF help @@ -195,6 +195,26 @@ config IMX_THERMAL cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed. +config MAX77620_THERMAL + tristate "Temperature sensor driver for Maxim MAX77620 PMIC" + depends on MFD_MAX77620 + depends on OF + help + Support for die junction temperature warning alarm for Maxim + Semiconductor PMIC MAX77620 device. Device generates two alarm + interrupts when PMIC die temperature cross the threshold of + 120 degC and 140 degC. + +config QORIQ_THERMAL + tristate "QorIQ Thermal Monitoring Unit" + depends on THERMAL_OF + depends on HAS_IOMEM + help + Support for Thermal Monitoring Unit (TMU) found on QorIQ platforms. + It supports one critical trip point and one passive trip point. The + cpufreq is used as the cooling device to throttle CPUs when the + passive trip is crossed. + config SPEAR_THERMAL tristate "SPEAr thermal sensor driver" depends on PLAT_SPEAR || COMPILE_TEST @@ -332,6 +352,16 @@ menu "ACPI INT340X thermal drivers" source drivers/thermal/int340x_thermal/Kconfig endmenu +config INTEL_BXT_PMIC_THERMAL + tristate "Intel Broxton PMIC thermal driver" + depends on X86 && INTEL_SOC_PMIC && REGMAP + help + Select this driver for Intel Broxton PMIC with ADC channels monitoring + system temperature measurements and alerts. + This driver is used for monitoring the ADC channels of PMIC and handles + the alert trip point interrupts and notifies the thermal framework with + the trip point and temperature details of the zone. + config INTEL_PCH_THERMAL tristate "Intel PCH Thermal Reporting Driver" depends on X86 && PCI @@ -399,4 +429,9 @@ config GENERIC_ADC_THERMAL to this driver. This driver reports the temperature by reading ADC channel and converts it to temperature based on lookup table. +menu "Qualcomm thermal drivers" +depends on (ARCH_QCOM && OF) || COMPILE_TEST +source "drivers/thermal/qcom/Kconfig" +endmenu + endif diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 10b07c14f8a9..c92eb22a41ff 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -37,6 +37,8 @@ obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o +obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o +obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o @@ -45,8 +47,10 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ +obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o obj-$(CONFIG_ST_THERMAL) += st/ +obj-$(CONFIG_QCOM_TSENS) += qcom/ obj-$(CONFIG_TEGRA_SOCTHERM) += tegra/ obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index a32b41783b77..9ce0e9eef923 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -74,7 +74,7 @@ struct power_table { * cpufreq frequencies. * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device. * @node: list_head to link all cpufreq_cooling_device together. - * @last_load: load measured by the latest call to cpufreq_get_actual_power() + * @last_load: load measured by the latest call to cpufreq_get_requested_power() * @time_in_idle: previous reading of the absolute time that this cpu was idle * @time_in_idle_timestamp: wall time of the last invocation of * get_cpu_idle_time_us() diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c index 652acd8fbe48..e776cea80cfc 100644 --- a/drivers/thermal/db8500_thermal.c +++ b/drivers/thermal/db8500_thermal.c @@ -306,7 +306,7 @@ static void db8500_thermal_work(struct work_struct *work) if (cur_mode == THERMAL_DEVICE_DISABLED) return; - thermal_zone_device_update(pzone->therm_dev); + thermal_zone_device_update(pzone->therm_dev, THERMAL_EVENT_UNSPECIFIED); dev_dbg(&pzone->therm_dev->device, "thermal work finished.\n"); } diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c index 01f0015f80dc..81631b110e17 100644 --- a/drivers/thermal/devfreq_cooling.c +++ b/drivers/thermal/devfreq_cooling.c @@ -312,7 +312,7 @@ static int devfreq_cooling_state2power(struct thermal_cooling_device *cdev, unsigned long freq; u32 static_power; - if (state < 0 || state >= dfc->freq_table_size) + if (state >= dfc->freq_table_size) return -EINVAL; freq = dfc->freq_table[state]; diff --git a/drivers/thermal/gov_bang_bang.c b/drivers/thermal/gov_bang_bang.c index bb118a152cbb..fc5e5057f0de 100644 --- a/drivers/thermal/gov_bang_bang.c +++ b/drivers/thermal/gov_bang_bang.c @@ -65,7 +65,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) if (instance->target == 0 && tz->temperature >= trip_temp) instance->target = 1; else if (instance->target == 1 && - tz->temperature < trip_temp - trip_hyst) + tz->temperature <= trip_temp - trip_hyst) instance->target = 0; dev_dbg(&instance->cdev->device, "target=%d\n", diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 97fad8f51e1c..f6429666a1cf 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -237,7 +237,8 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev) if (!data->sensors[i].tzd) continue; - thermal_zone_device_update(data->sensors[i].tzd); + thermal_zone_device_update(data->sensors[i].tzd, + THERMAL_EVENT_UNSPECIFIED); } return IRQ_HANDLED; diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index e473548b5d28..06912f0602b7 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -246,7 +246,7 @@ static int imx_set_mode(struct thermal_zone_device *tz, } data->mode = mode; - thermal_zone_device_update(tz); + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); return 0; } @@ -457,7 +457,7 @@ static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev) dev_dbg(&data->tz->device, "THERMAL ALARM: T > %d\n", data->alarm_temp / 1000); - thermal_zone_device_update(data->tz); + thermal_zone_device_update(data->tz, THERMAL_EVENT_UNSPECIFIED); return IRQ_HANDLED; } diff --git a/drivers/thermal/int340x_thermal/int3402_thermal.c b/drivers/thermal/int340x_thermal/int3402_thermal.c index 69df3d960303..8e90b3151a42 100644 --- a/drivers/thermal/int340x_thermal/int3402_thermal.c +++ b/drivers/thermal/int340x_thermal/int3402_thermal.c @@ -35,7 +35,8 @@ static void int3402_notify(acpi_handle handle, u32 event, void *data) case INT3402_PERF_CHANGED_EVENT: break; case INT3402_THERMAL_EVENT: - int340x_thermal_zone_device_update(priv->int340x_zone); + int340x_thermal_zone_device_update(priv->int340x_zone, + THERMAL_TRIP_VIOLATED); break; default: break; diff --git a/drivers/thermal/int340x_thermal/int3403_thermal.c b/drivers/thermal/int340x_thermal/int3403_thermal.c index 50a7a08e3a15..c4890c9437eb 100644 --- a/drivers/thermal/int340x_thermal/int3403_thermal.c +++ b/drivers/thermal/int340x_thermal/int3403_thermal.c @@ -25,6 +25,7 @@ #define INT3403_TYPE_CHARGER 0x0B #define INT3403_TYPE_BATTERY 0x0C #define INT3403_PERF_CHANGED_EVENT 0x80 +#define INT3403_PERF_TRIP_POINT_CHANGED 0x81 #define INT3403_THERMAL_EVENT 0x90 /* Preserved structure for future expandbility */ @@ -72,7 +73,13 @@ static void int3403_notify(acpi_handle handle, case INT3403_PERF_CHANGED_EVENT: break; case INT3403_THERMAL_EVENT: - int340x_thermal_zone_device_update(obj->int340x_zone); + int340x_thermal_zone_device_update(obj->int340x_zone, + THERMAL_TRIP_VIOLATED); + break; + case INT3403_PERF_TRIP_POINT_CHANGED: + int340x_thermal_read_trips(obj->int340x_zone); + int340x_thermal_zone_device_update(obj->int340x_zone, + THERMAL_TRIP_CHANGED); break; default: dev_err(&priv->pdev->dev, "Unsupported event [0x%x]\n", event); diff --git a/drivers/thermal/int340x_thermal/int340x_thermal_zone.c b/drivers/thermal/int340x_thermal/int340x_thermal_zone.c index b9b2666aa94c..145a5c53ff5c 100644 --- a/drivers/thermal/int340x_thermal/int340x_thermal_zone.c +++ b/drivers/thermal/int340x_thermal/int340x_thermal_zone.c @@ -177,6 +177,42 @@ static int int340x_thermal_get_trip_config(acpi_handle handle, char *name, return 0; } +int int340x_thermal_read_trips(struct int34x_thermal_zone *int34x_zone) +{ + int trip_cnt = int34x_zone->aux_trip_nr; + int i; + + int34x_zone->crt_trip_id = -1; + if (!int340x_thermal_get_trip_config(int34x_zone->adev->handle, "_CRT", + &int34x_zone->crt_temp)) + int34x_zone->crt_trip_id = trip_cnt++; + + int34x_zone->hot_trip_id = -1; + if (!int340x_thermal_get_trip_config(int34x_zone->adev->handle, "_HOT", + &int34x_zone->hot_temp)) + int34x_zone->hot_trip_id = trip_cnt++; + + int34x_zone->psv_trip_id = -1; + if (!int340x_thermal_get_trip_config(int34x_zone->adev->handle, "_PSV", + &int34x_zone->psv_temp)) + int34x_zone->psv_trip_id = trip_cnt++; + + for (i = 0; i < INT340X_THERMAL_MAX_ACT_TRIP_COUNT; i++) { + char name[5] = { '_', 'A', 'C', '0' + i, '\0' }; + + if (int340x_thermal_get_trip_config(int34x_zone->adev->handle, + name, + &int34x_zone->act_trips[i].temp)) + break; + + int34x_zone->act_trips[i].id = trip_cnt++; + int34x_zone->act_trips[i].valid = true; + } + + return trip_cnt; +} +EXPORT_SYMBOL_GPL(int340x_thermal_read_trips); + static struct thermal_zone_params int340x_thermal_params = { .governor_name = "user_space", .no_hwmon = true, @@ -188,7 +224,7 @@ struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *adev, struct int34x_thermal_zone *int34x_thermal_zone; acpi_status status; unsigned long long trip_cnt; - int trip_mask = 0, i; + int trip_mask = 0; int ret; int34x_thermal_zone = kzalloc(sizeof(*int34x_thermal_zone), @@ -214,28 +250,8 @@ struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *adev, int34x_thermal_zone->aux_trip_nr = trip_cnt; } - int34x_thermal_zone->crt_trip_id = -1; - if (!int340x_thermal_get_trip_config(adev->handle, "_CRT", - &int34x_thermal_zone->crt_temp)) - int34x_thermal_zone->crt_trip_id = trip_cnt++; - int34x_thermal_zone->hot_trip_id = -1; - if (!int340x_thermal_get_trip_config(adev->handle, "_HOT", - &int34x_thermal_zone->hot_temp)) - int34x_thermal_zone->hot_trip_id = trip_cnt++; - int34x_thermal_zone->psv_trip_id = -1; - if (!int340x_thermal_get_trip_config(adev->handle, "_PSV", - &int34x_thermal_zone->psv_temp)) - int34x_thermal_zone->psv_trip_id = trip_cnt++; - for (i = 0; i < INT340X_THERMAL_MAX_ACT_TRIP_COUNT; i++) { - char name[5] = { '_', 'A', 'C', '0' + i, '\0' }; + trip_cnt = int340x_thermal_read_trips(int34x_thermal_zone); - if (int340x_thermal_get_trip_config(adev->handle, name, - &int34x_thermal_zone->act_trips[i].temp)) - break; - - int34x_thermal_zone->act_trips[i].id = trip_cnt++; - int34x_thermal_zone->act_trips[i].valid = true; - } int34x_thermal_zone->lpat_table = acpi_lpat_get_conversion_table( adev->handle); diff --git a/drivers/thermal/int340x_thermal/int340x_thermal_zone.h b/drivers/thermal/int340x_thermal/int340x_thermal_zone.h index aaadf724ff2e..5f3ba4775c5c 100644 --- a/drivers/thermal/int340x_thermal/int340x_thermal_zone.h +++ b/drivers/thermal/int340x_thermal/int340x_thermal_zone.h @@ -46,6 +46,7 @@ struct int34x_thermal_zone { struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *, struct thermal_zone_device_ops *override_ops); void int340x_thermal_zone_remove(struct int34x_thermal_zone *); +int int340x_thermal_read_trips(struct int34x_thermal_zone *int34x_zone); static inline void int340x_thermal_zone_set_priv_data( struct int34x_thermal_zone *tzone, void *priv_data) @@ -60,9 +61,10 @@ static inline void *int340x_thermal_zone_get_priv_data( } static inline void int340x_thermal_zone_device_update( - struct int34x_thermal_zone *tzone) + struct int34x_thermal_zone *tzone, + enum thermal_notify_event event) { - thermal_zone_device_update(tzone->zone); + thermal_zone_device_update(tzone->zone, event); } #endif diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c index 42c1ac057bad..ff3b36f339e3 100644 --- a/drivers/thermal/int340x_thermal/processor_thermal_device.c +++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c @@ -258,7 +258,8 @@ static void proc_thermal_notify(acpi_handle handle, u32 event, void *data) switch (event) { case PROC_POWER_CAPABILITY_CHANGED: proc_thermal_read_ppcc(proc_priv); - int340x_thermal_zone_device_update(proc_priv->int340x_zone); + int340x_thermal_zone_device_update(proc_priv->int340x_zone, + THERMAL_DEVICE_POWER_CAPABILITY_CHANGED); break; default: dev_err(proc_priv->dev, "Unsupported event [0x%x]\n", event); diff --git a/drivers/thermal/intel_bxt_pmic_thermal.c b/drivers/thermal/intel_bxt_pmic_thermal.c new file mode 100644 index 000000000000..0f19a393ddd8 --- /dev/null +++ b/drivers/thermal/intel_bxt_pmic_thermal.c @@ -0,0 +1,300 @@ +/* + * Intel Broxton PMIC thermal driver + * + * Copyright (C) 2016 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/thermal.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/mfd/intel_soc_pmic.h> + +#define BXTWC_THRM0IRQ 0x4E04 +#define BXTWC_THRM1IRQ 0x4E05 +#define BXTWC_THRM2IRQ 0x4E06 +#define BXTWC_MTHRM0IRQ 0x4E12 +#define BXTWC_MTHRM1IRQ 0x4E13 +#define BXTWC_MTHRM2IRQ 0x4E14 +#define BXTWC_STHRM0IRQ 0x4F19 +#define BXTWC_STHRM1IRQ 0x4F1A +#define BXTWC_STHRM2IRQ 0x4F1B + +struct trip_config_map { + u16 irq_reg; + u16 irq_en; + u16 evt_stat; + u8 irq_mask; + u8 irq_en_mask; + u8 evt_mask; + u8 trip_num; +}; + +struct thermal_irq_map { + char handle[20]; + int num_trips; + const struct trip_config_map *trip_config; +}; + +struct pmic_thermal_data { + const struct thermal_irq_map *maps; + int num_maps; +}; + +static const struct trip_config_map bxtwc_str0_trip_config[] = { + { + .irq_reg = BXTWC_THRM0IRQ, + .irq_mask = 0x01, + .irq_en = BXTWC_MTHRM0IRQ, + .irq_en_mask = 0x01, + .evt_stat = BXTWC_STHRM0IRQ, + .evt_mask = 0x01, + .trip_num = 0 + }, + { + .irq_reg = BXTWC_THRM0IRQ, + .irq_mask = 0x10, + .irq_en = BXTWC_MTHRM0IRQ, + .irq_en_mask = 0x10, + .evt_stat = BXTWC_STHRM0IRQ, + .evt_mask = 0x10, + .trip_num = 1 + } +}; + +static const struct trip_config_map bxtwc_str1_trip_config[] = { + { + .irq_reg = BXTWC_THRM0IRQ, + .irq_mask = 0x02, + .irq_en = BXTWC_MTHRM0IRQ, + .irq_en_mask = 0x02, + .evt_stat = BXTWC_STHRM0IRQ, + .evt_mask = 0x02, + .trip_num = 0 + }, + { + .irq_reg = BXTWC_THRM0IRQ, + .irq_mask = 0x20, + .irq_en = BXTWC_MTHRM0IRQ, + .irq_en_mask = 0x20, + .evt_stat = BXTWC_STHRM0IRQ, + .evt_mask = 0x20, + .trip_num = 1 + }, +}; + +static const struct trip_config_map bxtwc_str2_trip_config[] = { + { + .irq_reg = BXTWC_THRM0IRQ, + .irq_mask = 0x04, + .irq_en = BXTWC_MTHRM0IRQ, + .irq_en_mask = 0x04, + .evt_stat = BXTWC_STHRM0IRQ, + .evt_mask = 0x04, + .trip_num = 0 + }, + { + .irq_reg = BXTWC_THRM0IRQ, + .irq_mask = 0x40, + .irq_en = BXTWC_MTHRM0IRQ, + .irq_en_mask = 0x40, + .evt_stat = BXTWC_STHRM0IRQ, + .evt_mask = 0x40, + .trip_num = 1 + }, +}; + +static const struct trip_config_map bxtwc_str3_trip_config[] = { + { + .irq_reg = BXTWC_THRM2IRQ, + .irq_mask = 0x10, + .irq_en = BXTWC_MTHRM2IRQ, + .irq_en_mask = 0x10, + .evt_stat = BXTWC_STHRM2IRQ, + .evt_mask = 0x10, + .trip_num = 0 + }, +}; + +static const struct thermal_irq_map bxtwc_thermal_irq_map[] = { + { + .handle = "STR0", + .trip_config = bxtwc_str0_trip_config, + .num_trips = ARRAY_SIZE(bxtwc_str0_trip_config), + }, + { + .handle = "STR1", + .trip_config = bxtwc_str1_trip_config, + .num_trips = ARRAY_SIZE(bxtwc_str1_trip_config), + }, + { + .handle = "STR2", + .trip_config = bxtwc_str2_trip_config, + .num_trips = ARRAY_SIZE(bxtwc_str2_trip_config), + }, + { + .handle = "STR3", + .trip_config = bxtwc_str3_trip_config, + .num_trips = ARRAY_SIZE(bxtwc_str3_trip_config), + }, +}; + +static const struct pmic_thermal_data bxtwc_thermal_data = { + .maps = bxtwc_thermal_irq_map, + .num_maps = ARRAY_SIZE(bxtwc_thermal_irq_map), +}; + +static irqreturn_t pmic_thermal_irq_handler(int irq, void *data) +{ + struct platform_device *pdev = data; + struct thermal_zone_device *tzd; + struct pmic_thermal_data *td; + struct intel_soc_pmic *pmic; + struct regmap *regmap; + u8 reg_val, mask, irq_stat, trip; + u16 reg, evt_stat_reg; + int i, j, ret; + + pmic = dev_get_drvdata(pdev->dev.parent); + regmap = pmic->regmap; + td = (struct pmic_thermal_data *) + platform_get_device_id(pdev)->driver_data; + + /* Resolve thermal irqs */ + for (i = 0; i < td->num_maps; i++) { + for (j = 0; j < td->maps[i].num_trips; j++) { + reg = td->maps[i].trip_config[j].irq_reg; + mask = td->maps[i].trip_config[j].irq_mask; + /* + * Read the irq register to resolve whether the + * interrupt was triggered for this sensor + */ + if (regmap_read(regmap, reg, &ret)) + return IRQ_HANDLED; + + reg_val = (u8)ret; + irq_stat = ((u8)ret & mask); + + if (!irq_stat) + continue; + + /* + * Read the status register to find out what + * event occurred i.e a high or a low + */ + evt_stat_reg = td->maps[i].trip_config[j].evt_stat; + if (regmap_read(regmap, evt_stat_reg, &ret)) + return IRQ_HANDLED; + + trip = td->maps[i].trip_config[j].trip_num; + tzd = thermal_zone_get_zone_by_name(td->maps[i].handle); + if (!IS_ERR(tzd)) + thermal_zone_device_update(tzd, + THERMAL_EVENT_UNSPECIFIED); + + /* Clear the appropriate irq */ + regmap_write(regmap, reg, reg_val & mask); + } + } + + return IRQ_HANDLED; +} + +static int pmic_thermal_probe(struct platform_device *pdev) +{ + struct regmap_irq_chip_data *regmap_irq_chip; + struct pmic_thermal_data *thermal_data; + int ret, irq, virq, i, j, pmic_irq_count; + struct intel_soc_pmic *pmic; + struct regmap *regmap; + struct device *dev; + u16 reg; + u8 mask; + + dev = &pdev->dev; + pmic = dev_get_drvdata(pdev->dev.parent); + if (!pmic) { + dev_err(dev, "Failed to get struct intel_soc_pmic pointer\n"); + return -ENODEV; + } + + thermal_data = (struct pmic_thermal_data *) + platform_get_device_id(pdev)->driver_data; + if (!thermal_data) { + dev_err(dev, "No thermal data initialized!!\n"); + return -ENODEV; + } + + regmap = pmic->regmap; + regmap_irq_chip = pmic->irq_chip_data_level2; + + pmic_irq_count = 0; + while ((irq = platform_get_irq(pdev, pmic_irq_count)) != -ENXIO) { + virq = regmap_irq_get_virq(regmap_irq_chip, irq); + if (virq < 0) { + dev_err(dev, "failed to get virq by irq %d\n", irq); + return virq; + } + + ret = devm_request_threaded_irq(&pdev->dev, virq, + NULL, pmic_thermal_irq_handler, + IRQF_ONESHOT, "pmic_thermal", pdev); + + if (ret) { + dev_err(dev, "request irq(%d) failed: %d\n", virq, ret); + return ret; + } + pmic_irq_count++; + } + + /* Enable thermal interrupts */ + for (i = 0; i < thermal_data->num_maps; i++) { + for (j = 0; j < thermal_data->maps[i].num_trips; j++) { + reg = thermal_data->maps[i].trip_config[j].irq_en; + mask = thermal_data->maps[i].trip_config[j].irq_en_mask; + ret = regmap_update_bits(regmap, reg, mask, 0x00); + if (ret) + return ret; + } + } + + return 0; +} + +static const struct platform_device_id pmic_thermal_id_table[] = { + { + .name = "bxt_wcove_thermal", + .driver_data = (kernel_ulong_t)&bxtwc_thermal_data, + }, + {}, +}; + +static struct platform_driver pmic_thermal_driver = { + .probe = pmic_thermal_probe, + .driver = { + .name = "pmic_thermal", + }, + .id_table = pmic_thermal_id_table, +}; + +MODULE_DEVICE_TABLE(platform, pmic_thermal_id_table); +module_platform_driver(pmic_thermal_driver); + +MODULE_AUTHOR("Yegnesh S Iyer <yegnesh.s.iyer@intel.com>"); +MODULE_DESCRIPTION("Intel Broxton PMIC Thermal Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/intel_soc_dts_iosf.c b/drivers/thermal/intel_soc_dts_iosf.c index f72e1db3216f..e0813dfaa278 100644 --- a/drivers/thermal/intel_soc_dts_iosf.c +++ b/drivers/thermal/intel_soc_dts_iosf.c @@ -391,7 +391,8 @@ void intel_soc_dts_iosf_interrupt_handler(struct intel_soc_dts_sensors *sensors) for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) { pr_debug("TZD update for zone %d\n", i); - thermal_zone_device_update(sensors->soc_dts[i].tzone); + thermal_zone_device_update(sensors->soc_dts[i].tzone, + THERMAL_EVENT_UNSPECIFIED); } } else spin_unlock_irqrestore(&sensors->intr_notify_lock, flags); diff --git a/drivers/thermal/max77620_thermal.c b/drivers/thermal/max77620_thermal.c new file mode 100644 index 000000000000..83905ff46e40 --- /dev/null +++ b/drivers/thermal/max77620_thermal.c @@ -0,0 +1,166 @@ +/* + * Junction temperature thermal driver for Maxim Max77620. + * + * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * Mallikarjun Kasoju <mkasoju@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/mfd/max77620.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/thermal.h> + +#define MAX77620_NORMAL_OPERATING_TEMP 100000 +#define MAX77620_TJALARM1_TEMP 120000 +#define MAX77620_TJALARM2_TEMP 140000 + +struct max77620_therm_info { + struct device *dev; + struct regmap *rmap; + struct thermal_zone_device *tz_device; + int irq_tjalarm1; + int irq_tjalarm2; +}; + +/** + * max77620_thermal_read_temp: Read PMIC die temperatue. + * @data: Device specific data. + * temp: Temperature in millidegrees Celsius + * + * The actual temperature of PMIC die is not available from PMIC. + * PMIC only tells the status if it has crossed or not the threshold level + * of 120degC or 140degC. + * If threshold has not been crossed then assume die temperature as 100degC + * else 120degC or 140deG based on the PMIC die temp threshold status. + * + * Return 0 on success otherwise error number to show reason of failure. + */ + +static int max77620_thermal_read_temp(void *data, int *temp) +{ + struct max77620_therm_info *mtherm = data; + unsigned int val; + int ret; + + ret = regmap_read(mtherm->rmap, MAX77620_REG_STATLBT, &val); + if (ret < 0) { + dev_err(mtherm->dev, "Failed to read STATLBT: %d\n", ret); + return ret; + } + + if (val & MAX77620_IRQ_TJALRM2_MASK) + *temp = MAX77620_TJALARM2_TEMP; + else if (val & MAX77620_IRQ_TJALRM1_MASK) + *temp = MAX77620_TJALARM1_TEMP; + else + *temp = MAX77620_NORMAL_OPERATING_TEMP; + + return 0; +} + +static const struct thermal_zone_of_device_ops max77620_thermal_ops = { + .get_temp = max77620_thermal_read_temp, +}; + +static irqreturn_t max77620_thermal_irq(int irq, void *data) +{ + struct max77620_therm_info *mtherm = data; + + if (irq == mtherm->irq_tjalarm1) + dev_warn(mtherm->dev, "Junction Temp Alarm1(120C) occurred\n"); + else if (irq == mtherm->irq_tjalarm2) + dev_crit(mtherm->dev, "Junction Temp Alarm2(140C) occurred\n"); + + thermal_zone_device_update(mtherm->tz_device, + THERMAL_EVENT_UNSPECIFIED); + + return IRQ_HANDLED; +} + +static int max77620_thermal_probe(struct platform_device *pdev) +{ + struct max77620_therm_info *mtherm; + int ret; + + mtherm = devm_kzalloc(&pdev->dev, sizeof(*mtherm), GFP_KERNEL); + if (!mtherm) + return -ENOMEM; + + mtherm->irq_tjalarm1 = platform_get_irq(pdev, 0); + mtherm->irq_tjalarm2 = platform_get_irq(pdev, 1); + if ((mtherm->irq_tjalarm1 < 0) || (mtherm->irq_tjalarm2 < 0)) { + dev_err(&pdev->dev, "Alarm irq number not available\n"); + return -EINVAL; + } + + pdev->dev.of_node = pdev->dev.parent->of_node; + + mtherm->dev = &pdev->dev; + mtherm->rmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!mtherm->rmap) { + dev_err(&pdev->dev, "Failed to get parent regmap\n"); + return -ENODEV; + } + + mtherm->tz_device = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, + mtherm, &max77620_thermal_ops); + if (IS_ERR(mtherm->tz_device)) { + ret = PTR_ERR(mtherm->tz_device); + dev_err(&pdev->dev, "Failed to register thermal zone: %d\n", + ret); + return ret; + } + + ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm1, NULL, + max77620_thermal_irq, + IRQF_ONESHOT | IRQF_SHARED, + dev_name(&pdev->dev), mtherm); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to request irq1: %d\n", ret); + return ret; + } + + ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm2, NULL, + max77620_thermal_irq, + IRQF_ONESHOT | IRQF_SHARED, + dev_name(&pdev->dev), mtherm); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to request irq2: %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, mtherm); + + return 0; +} + +static struct platform_device_id max77620_thermal_devtype[] = { + { .name = "max77620-thermal", }, + {}, +}; + +static struct platform_driver max77620_thermal_driver = { + .driver = { + .name = "max77620-thermal", + }, + .probe = max77620_thermal_probe, + .id_table = max77620_thermal_devtype, +}; + +module_platform_driver(max77620_thermal_driver); + +MODULE_DESCRIPTION("Max77620 Junction temperature Thermal driver"); +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@nvidia.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 262ab0a2266f..34169c32d495 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -2,6 +2,7 @@ * Copyright (c) 2015 MediaTek Inc. * Author: Hanyi Wu <hanyi.wu@mediatek.com> * Sascha Hauer <s.hauer@pengutronix.de> + * Dawei Chien <dawei.chien@mediatek.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,6 +22,7 @@ #include <linux/nvmem-consumer.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/io.h> @@ -88,6 +90,7 @@ #define TEMP_ADCVALIDMASK_VALID_HIGH BIT(5) #define TEMP_ADCVALIDMASK_VALID_POS(bit) (bit) +/* MT8173 thermal sensors */ #define MT8173_TS1 0 #define MT8173_TS2 1 #define MT8173_TS3 2 @@ -106,7 +109,12 @@ /* The number of sensing points per bank */ #define MT8173_NUM_SENSORS_PER_ZONE 4 -/* Layout of the fuses providing the calibration data */ +/* + * Layout of the fuses providing the calibration data + * These macros could be used for both MT8173 and MT2701. + * MT8173 has five sensors and need five VTS calibration data, + * and MT2701 has three sensors and need three VTS calibration data. + */ #define MT8173_CALIB_BUF0_VALID BIT(0) #define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff) #define MT8173_CALIB_BUF0_VTS_TS1(x) (((x) >> 17) & 0x1ff) @@ -117,24 +125,50 @@ #define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f) #define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f) +/* MT2701 thermal sensors */ +#define MT2701_TS1 0 +#define MT2701_TS2 1 +#define MT2701_TSABB 2 + +/* AUXADC channel 11 is used for the temperature sensors */ +#define MT2701_TEMP_AUXADC_CHANNEL 11 + +/* The total number of temperature sensors in the MT2701 */ +#define MT2701_NUM_SENSORS 3 + #define THERMAL_NAME "mtk-thermal" +/* The number of sensing points per bank */ +#define MT2701_NUM_SENSORS_PER_ZONE 3 + struct mtk_thermal; +struct thermal_bank_cfg { + unsigned int num_sensors; + const int *sensors; +}; + struct mtk_thermal_bank { struct mtk_thermal *mt; int id; }; +struct mtk_thermal_data { + s32 num_banks; + s32 num_sensors; + s32 auxadc_channel; + const int *sensor_mux_values; + const int *msr; + const int *adcpnp; + struct thermal_bank_cfg bank_data[]; +}; + struct mtk_thermal { struct device *dev; void __iomem *thermal_base; struct clk *clk_peri_therm; struct clk *clk_auxadc; - - struct mtk_thermal_bank banks[MT8173_NUM_ZONES]; - /* lock: for getting and putting banks */ struct mutex lock; @@ -144,16 +178,44 @@ struct mtk_thermal { s32 o_slope; s32 vts[MT8173_NUM_SENSORS]; + const struct mtk_thermal_data *conf; + struct mtk_thermal_bank banks[]; }; -struct mtk_thermal_bank_cfg { - unsigned int num_sensors; - unsigned int sensors[MT8173_NUM_SENSORS_PER_ZONE]; +/* MT8173 thermal sensor data */ +const int mt8173_bank_data[MT8173_NUM_ZONES][3] = { + { MT8173_TS2, MT8173_TS3 }, + { MT8173_TS2, MT8173_TS4 }, + { MT8173_TS1, MT8173_TS2, MT8173_TSABB }, + { MT8173_TS2 }, }; -static const int sensor_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; +const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = { + TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR2 +}; -/* +const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = { + TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 +}; + +const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; + +/* MT2701 thermal sensor data */ +const int mt2701_bank_data[MT2701_NUM_SENSORS] = { + MT2701_TS1, MT2701_TS2, MT2701_TSABB +}; + +const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = { + TEMP_MSR0, TEMP_MSR1, TEMP_MSR2 +}; + +const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = { + TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2 +}; + +const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 }; + +/** * The MT8173 thermal controller has four banks. Each bank can read up to * four temperature sensors simultaneously. The MT8173 has a total of 5 * temperature sensors. We use each bank to measure a certain area of the @@ -166,42 +228,53 @@ static const int sensor_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; * data, and this indeed needs the temperatures of the individual banks * for making better decisions. */ -static const struct mtk_thermal_bank_cfg bank_data[] = { - { - .num_sensors = 2, - .sensors = { MT8173_TS2, MT8173_TS3 }, - }, { - .num_sensors = 2, - .sensors = { MT8173_TS2, MT8173_TS4 }, - }, { - .num_sensors = 3, - .sensors = { MT8173_TS1, MT8173_TS2, MT8173_TSABB }, - }, { - .num_sensors = 1, - .sensors = { MT8173_TS2 }, +static const struct mtk_thermal_data mt8173_thermal_data = { + .auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL, + .num_banks = MT8173_NUM_ZONES, + .num_sensors = MT8173_NUM_SENSORS, + .bank_data = { + { + .num_sensors = 2, + .sensors = mt8173_bank_data[0], + }, { + .num_sensors = 2, + .sensors = mt8173_bank_data[1], + }, { + .num_sensors = 3, + .sensors = mt8173_bank_data[2], + }, { + .num_sensors = 1, + .sensors = mt8173_bank_data[3], + }, }, + .msr = mt8173_msr, + .adcpnp = mt8173_adcpnp, + .sensor_mux_values = mt8173_mux_values, }; -struct mtk_thermal_sense_point { - int msr; - int adcpnp; -}; - -static const struct mtk_thermal_sense_point - sensing_points[MT8173_NUM_SENSORS_PER_ZONE] = { - { - .msr = TEMP_MSR0, - .adcpnp = TEMP_ADCPNP0, - }, { - .msr = TEMP_MSR1, - .adcpnp = TEMP_ADCPNP1, - }, { - .msr = TEMP_MSR2, - .adcpnp = TEMP_ADCPNP2, - }, { - .msr = TEMP_MSR3, - .adcpnp = TEMP_ADCPNP3, +/** + * The MT2701 thermal controller has one bank, which can read up to + * three temperature sensors simultaneously. The MT2701 has a total of 3 + * temperature sensors. + * + * The thermal core only gets the maximum temperature of this one bank, + * so the bank concept wouldn't be necessary here. However, the SVS (Smart + * Voltage Scaling) unit makes its decisions based on the same bank + * data. + */ +static const struct mtk_thermal_data mt2701_thermal_data = { + .auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL, + .num_banks = 1, + .num_sensors = MT2701_NUM_SENSORS, + .bank_data = { + { + .num_sensors = 3, + .sensors = mt2701_bank_data, + }, }, + .msr = mt2701_msr, + .adcpnp = mt2701_adcpnp, + .sensor_mux_values = mt2701_mux_values, }; /** @@ -270,13 +343,16 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank) static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) { struct mtk_thermal *mt = bank->mt; + const struct mtk_thermal_data *conf = mt->conf; int i, temp = INT_MIN, max = INT_MIN; u32 raw; - for (i = 0; i < bank_data[bank->id].num_sensors; i++) { - raw = readl(mt->thermal_base + sensing_points[i].msr); + for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { + raw = readl(mt->thermal_base + conf->msr[i]); - temp = raw_to_mcelsius(mt, bank_data[bank->id].sensors[i], raw); + temp = raw_to_mcelsius(mt, + conf->bank_data[bank->id].sensors[i], + raw); /* * The first read of a sensor often contains very high bogus @@ -299,7 +375,7 @@ static int mtk_read_temp(void *data, int *temperature) int i; int tempmax = INT_MIN; - for (i = 0; i < MT8173_NUM_ZONES; i++) { + for (i = 0; i < mt->conf->num_banks; i++) { struct mtk_thermal_bank *bank = &mt->banks[i]; mtk_thermal_get_bank(bank); @@ -322,7 +398,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, u32 apmixed_phys_base, u32 auxadc_phys_base) { struct mtk_thermal_bank *bank = &mt->banks[num]; - const struct mtk_thermal_bank_cfg *cfg = &bank_data[num]; + const struct mtk_thermal_data *conf = mt->conf; int i; bank->id = num; @@ -368,7 +444,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, * this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0) * automatically by hw */ - writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCMUX); + writel(BIT(conf->auxadc_channel), mt->thermal_base + TEMP_ADCMUX); /* AHB address for auxadc mux selection */ writel(auxadc_phys_base + AUXADC_CON1_CLR_V, @@ -379,18 +455,18 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, mt->thermal_base + TEMP_PNPMUXADDR); /* AHB value for auxadc enable */ - writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCEN); + writel(BIT(conf->auxadc_channel), mt->thermal_base + TEMP_ADCEN); /* AHB address for auxadc enable (channel 0 immediate mode selected) */ writel(auxadc_phys_base + AUXADC_CON1_SET_V, mt->thermal_base + TEMP_ADCENADDR); /* AHB address for auxadc valid bit */ - writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL), + writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel), mt->thermal_base + TEMP_ADCVALIDADDR); /* AHB address for auxadc voltage output */ - writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL), + writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel), mt->thermal_base + TEMP_ADCVOLTADDR); /* read valid & voltage are at the same register */ @@ -407,11 +483,12 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE, mt->thermal_base + TEMP_ADCWRITECTRL); - for (i = 0; i < cfg->num_sensors; i++) - writel(sensor_mux_values[cfg->sensors[i]], - mt->thermal_base + sensing_points[i].adcpnp); + for (i = 0; i < conf->bank_data[num].num_sensors; i++) + writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]], + mt->thermal_base + conf->adcpnp[i]); - writel((1 << cfg->num_sensors) - 1, mt->thermal_base + TEMP_MONCTL0); + writel((1 << conf->bank_data[num].num_sensors) - 1, + mt->thermal_base + TEMP_MONCTL0); writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | TEMP_ADCWRITECTRL_ADC_MUX_WRITE, @@ -442,7 +519,7 @@ static int mtk_thermal_get_calibration_data(struct device *dev, /* Start with default values */ mt->adc_ge = 512; - for (i = 0; i < MT8173_NUM_SENSORS; i++) + for (i = 0; i < mt->conf->num_sensors; i++) mt->vts[i] = 260; mt->degc_cali = 40; mt->o_slope = 0; @@ -486,18 +563,37 @@ out: return ret; } +static const struct of_device_id mtk_thermal_of_match[] = { + { + .compatible = "mediatek,mt8173-thermal", + .data = (void *)&mt8173_thermal_data, + }, + { + .compatible = "mediatek,mt2701-thermal", + .data = (void *)&mt2701_thermal_data, + }, { + }, +}; +MODULE_DEVICE_TABLE(of, mtk_thermal_of_match); + static int mtk_thermal_probe(struct platform_device *pdev) { int ret, i; struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node; struct mtk_thermal *mt; struct resource *res; + const struct of_device_id *of_id; u64 auxadc_phys_base, apmixed_phys_base; + struct thermal_zone_device *tzdev; mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL); if (!mt) return -ENOMEM; + of_id = of_match_device(mtk_thermal_of_match, &pdev->dev); + if (of_id) + mt->conf = (const struct mtk_thermal_data *)of_id->data; + mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm"); if (IS_ERR(mt->clk_peri_therm)) return PTR_ERR(mt->clk_peri_therm); @@ -565,17 +661,23 @@ static int mtk_thermal_probe(struct platform_device *pdev) goto err_disable_clk_auxadc; } - for (i = 0; i < MT8173_NUM_ZONES; i++) + for (i = 0; i < mt->conf->num_banks; i++) mtk_thermal_init_bank(mt, i, apmixed_phys_base, auxadc_phys_base); platform_set_drvdata(pdev, mt); - devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mt, - &mtk_thermal_ops); + tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mt, + &mtk_thermal_ops); + if (IS_ERR(tzdev)) { + ret = PTR_ERR(tzdev); + goto err_disable_clk_peri_therm; + } return 0; +err_disable_clk_peri_therm: + clk_disable_unprepare(mt->clk_peri_therm); err_disable_clk_auxadc: clk_disable_unprepare(mt->clk_auxadc); @@ -592,13 +694,6 @@ static int mtk_thermal_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id mtk_thermal_of_match[] = { - { - .compatible = "mediatek,mt8173-thermal", - }, { - }, -}; - static struct platform_driver mtk_thermal_driver = { .probe = mtk_thermal_probe, .remove = mtk_thermal_remove, @@ -610,6 +705,7 @@ static struct platform_driver mtk_thermal_driver = { module_platform_driver(mtk_thermal_driver); +MODULE_AUTHOR("Dawei Chien <dawei.chien@mediatek.com>"); MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); MODULE_AUTHOR("Hanyi Wu <hanyi.wu@mediatek.com>"); MODULE_DESCRIPTION("Mediatek thermal driver"); diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index b8e509c60848..d04ec3b9e5ff 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -101,6 +101,17 @@ static int of_thermal_get_temp(struct thermal_zone_device *tz, return data->ops->get_temp(data->sensor_data, temp); } +static int of_thermal_set_trips(struct thermal_zone_device *tz, + int low, int high) +{ + struct __thermal_zone *data = tz->devdata; + + if (!data->ops || !data->ops->set_trips) + return -EINVAL; + + return data->ops->set_trips(data->sensor_data, low, high); +} + /** * of_thermal_get_ntrips - function to export number of available trip * points. @@ -181,9 +192,6 @@ static int of_thermal_set_emul_temp(struct thermal_zone_device *tz, { struct __thermal_zone *data = tz->devdata; - if (!data->ops || !data->ops->set_emul_temp) - return -EINVAL; - return data->ops->set_emul_temp(data->sensor_data, temp); } @@ -191,25 +199,11 @@ static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip, enum thermal_trend *trend) { struct __thermal_zone *data = tz->devdata; - long dev_trend; - int r; if (!data->ops->get_trend) return -EINVAL; - r = data->ops->get_trend(data->sensor_data, &dev_trend); - if (r) - return r; - - /* TODO: These intervals might have some thresholds, but in core code */ - if (dev_trend > 0) - *trend = THERMAL_TREND_RAISING; - else if (dev_trend < 0) - *trend = THERMAL_TREND_DROPPING; - else - *trend = THERMAL_TREND_STABLE; - - return 0; + return data->ops->get_trend(data->sensor_data, trip, trend); } static int of_thermal_bind(struct thermal_zone_device *thermal, @@ -292,7 +286,7 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz, mutex_unlock(&tz->lock); data->mode = mode; - thermal_zone_device_update(tz); + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); return 0; } @@ -427,7 +421,17 @@ thermal_zone_of_add_sensor(struct device_node *zone, tzd->ops->get_temp = of_thermal_get_temp; tzd->ops->get_trend = of_thermal_get_trend; - tzd->ops->set_emul_temp = of_thermal_set_emul_temp; + + /* + * The thermal zone core will calculate the window if they have set the + * optional set_trips pointer. + */ + if (ops->set_trips) + tzd->ops->set_trips = of_thermal_set_trips; + + if (ops->set_emul_temp) + tzd->ops->set_emul_temp = of_thermal_set_emul_temp; + mutex_unlock(&tzd->lock); return tzd; @@ -596,7 +600,7 @@ static int devm_thermal_zone_of_sensor_match(struct device *dev, void *res, * Return: On success returns a valid struct thermal_zone_device, * otherwise, it returns a corresponding ERR_PTR(). Caller must * check the return value with help of IS_ERR() helper. - * Registered hermal_zone_device device will automatically be + * Registered thermal_zone_device device will automatically be * released when device is unbounded. */ struct thermal_zone_device *devm_thermal_zone_of_sensor_register( diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom-spmi-temp-alarm.c index f8a3c60bef94..819c6d5d7aa7 100644 --- a/drivers/thermal/qcom-spmi-temp-alarm.c +++ b/drivers/thermal/qcom-spmi-temp-alarm.c @@ -150,7 +150,7 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data) { struct qpnp_tm_chip *chip = data; - thermal_zone_device_update(chip->tz_dev); + thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED); return IRQ_HANDLED; } diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig new file mode 100644 index 000000000000..be32e5abce3c --- /dev/null +++ b/drivers/thermal/qcom/Kconfig @@ -0,0 +1,11 @@ +config QCOM_TSENS + tristate "Qualcomm TSENS Temperature Alarm" + depends on THERMAL + depends on QCOM_QFPROM + depends on ARCH_QCOM || COMPILE_TEST + help + This enables the thermal sysfs driver for the TSENS device. It shows + up in Sysfs as a thermal zone with multiple trip points. Disabling the + thermal zone device via the mode file results in disabling the sensor. + Also able to set threshold temperature for both hot and cold and update + when a threshold is reached. diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile new file mode 100644 index 000000000000..2cc2193637e7 --- /dev/null +++ b/drivers/thermal/qcom/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o +qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o diff --git a/drivers/thermal/qcom/tsens-8916.c b/drivers/thermal/qcom/tsens-8916.c new file mode 100644 index 000000000000..fdf561b8b81d --- /dev/null +++ b/drivers/thermal/qcom/tsens-8916.c @@ -0,0 +1,113 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include "tsens.h" + +/* eeprom layout data for 8916 */ +#define BASE0_MASK 0x0000007f +#define BASE1_MASK 0xfe000000 +#define BASE0_SHIFT 0 +#define BASE1_SHIFT 25 + +#define S0_P1_MASK 0x00000f80 +#define S1_P1_MASK 0x003e0000 +#define S2_P1_MASK 0xf8000000 +#define S3_P1_MASK 0x000003e0 +#define S4_P1_MASK 0x000f8000 + +#define S0_P2_MASK 0x0001f000 +#define S1_P2_MASK 0x07c00000 +#define S2_P2_MASK 0x0000001f +#define S3_P2_MASK 0x00007c00 +#define S4_P2_MASK 0x01f00000 + +#define S0_P1_SHIFT 7 +#define S1_P1_SHIFT 17 +#define S2_P1_SHIFT 27 +#define S3_P1_SHIFT 5 +#define S4_P1_SHIFT 15 + +#define S0_P2_SHIFT 12 +#define S1_P2_SHIFT 22 +#define S2_P2_SHIFT 0 +#define S3_P2_SHIFT 10 +#define S4_P2_SHIFT 20 + +#define CAL_SEL_MASK 0xe0000000 +#define CAL_SEL_SHIFT 29 + +static int calibrate_8916(struct tsens_device *tmdev) +{ + int base0 = 0, base1 = 0, i; + u32 p1[5], p2[5]; + int mode = 0; + u32 *qfprom_cdata, *qfprom_csel; + + qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + qfprom_csel = (u32 *)qfprom_read(tmdev->dev, "calib_sel"); + if (IS_ERR(qfprom_csel)) + return PTR_ERR(qfprom_csel); + + mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT; + dev_dbg(tmdev->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT; + p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT; + for (i = 0; i < tmdev->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 3); + /* Fall through */ + case ONE_PT_CALIB2: + base0 = (qfprom_cdata[0] & BASE0_MASK); + p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT; + for (i = 0; i < tmdev->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 3); + break; + default: + for (i = 0; i < tmdev->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(tmdev, p1, p2, mode); + + return 0; +} + +static const struct tsens_ops ops_8916 = { + .init = init_common, + .calibrate = calibrate_8916, + .get_temp = get_temp_common, +}; + +const struct tsens_data data_8916 = { + .num_sensors = 5, + .ops = &ops_8916, + .hw_ids = (unsigned int []){0, 1, 2, 4, 5 }, +}; diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c new file mode 100644 index 000000000000..0451277d3a8f --- /dev/null +++ b/drivers/thermal/qcom/tsens-8960.c @@ -0,0 +1,292 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <linux/thermal.h> +#include "tsens.h" + +#define CAL_MDEGC 30000 + +#define CONFIG_ADDR 0x3640 +#define CONFIG_ADDR_8660 0x3620 +/* CONFIG_ADDR bitmasks */ +#define CONFIG 0x9b +#define CONFIG_MASK 0xf +#define CONFIG_8660 1 +#define CONFIG_SHIFT_8660 28 +#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660) + +#define STATUS_CNTL_ADDR_8064 0x3660 +#define CNTL_ADDR 0x3620 +/* CNTL_ADDR bitmasks */ +#define EN BIT(0) +#define SW_RST BIT(1) +#define SENSOR0_EN BIT(3) +#define SLP_CLK_ENA BIT(26) +#define SLP_CLK_ENA_8660 BIT(24) +#define MEASURE_PERIOD 1 +#define SENSOR0_SHIFT 3 + +/* INT_STATUS_ADDR bitmasks */ +#define MIN_STATUS_MASK BIT(0) +#define LOWER_STATUS_CLR BIT(1) +#define UPPER_STATUS_CLR BIT(2) +#define MAX_STATUS_MASK BIT(3) + +#define THRESHOLD_ADDR 0x3624 +/* THRESHOLD_ADDR bitmasks */ +#define THRESHOLD_MAX_LIMIT_SHIFT 24 +#define THRESHOLD_MIN_LIMIT_SHIFT 16 +#define THRESHOLD_UPPER_LIMIT_SHIFT 8 +#define THRESHOLD_LOWER_LIMIT_SHIFT 0 + +/* Initial temperature threshold values */ +#define LOWER_LIMIT_TH 0x50 +#define UPPER_LIMIT_TH 0xdf +#define MIN_LIMIT_TH 0x0 +#define MAX_LIMIT_TH 0xff + +#define S0_STATUS_ADDR 0x3628 +#define INT_STATUS_ADDR 0x363c +#define TRDY_MASK BIT(7) +#define TIMEOUT_US 100 + +static int suspend_8960(struct tsens_device *tmdev) +{ + int ret; + unsigned int mask; + struct regmap *map = tmdev->map; + + ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold); + if (ret) + return ret; + + ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control); + if (ret) + return ret; + + if (tmdev->num_sensors > 1) + mask = SLP_CLK_ENA | EN; + else + mask = SLP_CLK_ENA_8660 | EN; + + ret = regmap_update_bits(map, CNTL_ADDR, mask, 0); + if (ret) + return ret; + + return 0; +} + +static int resume_8960(struct tsens_device *tmdev) +{ + int ret; + struct regmap *map = tmdev->map; + + ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); + if (ret) + return ret; + + /* + * Separate CONFIG restore is not needed only for 8660 as + * config is part of CTRL Addr and its restored as such + */ + if (tmdev->num_sensors > 1) { + ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG); + if (ret) + return ret; + } + + ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold); + if (ret) + return ret; + + ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control); + if (ret) + return ret; + + return 0; +} + +static int enable_8960(struct tsens_device *tmdev, int id) +{ + int ret; + u32 reg, mask; + + ret = regmap_read(tmdev->map, CNTL_ADDR, ®); + if (ret) + return ret; + + mask = BIT(id + SENSOR0_SHIFT); + ret = regmap_write(tmdev->map, CNTL_ADDR, reg | SW_RST); + if (ret) + return ret; + + if (tmdev->num_sensors > 1) + reg |= mask | SLP_CLK_ENA | EN; + else + reg |= mask | SLP_CLK_ENA_8660 | EN; + + ret = regmap_write(tmdev->map, CNTL_ADDR, reg); + if (ret) + return ret; + + return 0; +} + +static void disable_8960(struct tsens_device *tmdev) +{ + int ret; + u32 reg_cntl; + u32 mask; + + mask = GENMASK(tmdev->num_sensors - 1, 0); + mask <<= SENSOR0_SHIFT; + mask |= EN; + + ret = regmap_read(tmdev->map, CNTL_ADDR, ®_cntl); + if (ret) + return; + + reg_cntl &= ~mask; + + if (tmdev->num_sensors > 1) + reg_cntl &= ~SLP_CLK_ENA; + else + reg_cntl &= ~SLP_CLK_ENA_8660; + + regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); +} + +static int init_8960(struct tsens_device *tmdev) +{ + int ret, i; + u32 reg_cntl; + + tmdev->map = dev_get_regmap(tmdev->dev, NULL); + if (!tmdev->map) + return -ENODEV; + + /* + * The status registers for each sensor are discontiguous + * because some SoCs have 5 sensors while others have more + * but the control registers stay in the same place, i.e + * directly after the first 5 status registers. + */ + for (i = 0; i < tmdev->num_sensors; i++) { + if (i >= 5) + tmdev->sensor[i].status = S0_STATUS_ADDR + 40; + tmdev->sensor[i].status += i * 4; + } + + reg_cntl = SW_RST; + ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl); + if (ret) + return ret; + + if (tmdev->num_sensors > 1) { + reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); + reg_cntl &= ~SW_RST; + ret = regmap_update_bits(tmdev->map, CONFIG_ADDR, + CONFIG_MASK, CONFIG); + } else { + reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16); + reg_cntl &= ~CONFIG_MASK_8660; + reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660; + } + + reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT; + ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); + if (ret) + return ret; + + reg_cntl |= EN; + ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); + if (ret) + return ret; + + return 0; +} + +static int calibrate_8960(struct tsens_device *tmdev) +{ + int i; + char *data; + + ssize_t num_read = tmdev->num_sensors; + struct tsens_sensor *s = tmdev->sensor; + + data = qfprom_read(tmdev->dev, "calib"); + if (IS_ERR(data)) + data = qfprom_read(tmdev->dev, "calib_backup"); + if (IS_ERR(data)) + return PTR_ERR(data); + + for (i = 0; i < num_read; i++, s++) + s->offset = data[i]; + + return 0; +} + +/* Temperature on y axis and ADC-code on x-axis */ +static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s) +{ + int slope, offset; + + slope = thermal_zone_get_slope(s->tzd); + offset = CAL_MDEGC - slope * s->offset; + + return adc_code * slope + offset; +} + +static int get_temp_8960(struct tsens_device *tmdev, int id, int *temp) +{ + int ret; + u32 code, trdy; + const struct tsens_sensor *s = &tmdev->sensor[id]; + unsigned long timeout; + + timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); + do { + ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy); + if (ret) + return ret; + if (!(trdy & TRDY_MASK)) + continue; + ret = regmap_read(tmdev->map, s->status, &code); + if (ret) + return ret; + *temp = code_to_mdegC(code, s); + return 0; + } while (time_before(jiffies, timeout)); + + return -ETIMEDOUT; +} + +static const struct tsens_ops ops_8960 = { + .init = init_8960, + .calibrate = calibrate_8960, + .get_temp = get_temp_8960, + .enable = enable_8960, + .disable = disable_8960, + .suspend = suspend_8960, + .resume = resume_8960, +}; + +const struct tsens_data data_8960 = { + .num_sensors = 11, + .ops = &ops_8960, +}; diff --git a/drivers/thermal/qcom/tsens-8974.c b/drivers/thermal/qcom/tsens-8974.c new file mode 100644 index 000000000000..9baf77e8cbe3 --- /dev/null +++ b/drivers/thermal/qcom/tsens-8974.c @@ -0,0 +1,244 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include "tsens.h" + +/* eeprom layout data for 8974 */ +#define BASE1_MASK 0xff +#define S0_P1_MASK 0x3f00 +#define S1_P1_MASK 0xfc000 +#define S2_P1_MASK 0x3f00000 +#define S3_P1_MASK 0xfc000000 +#define S4_P1_MASK 0x3f +#define S5_P1_MASK 0xfc0 +#define S6_P1_MASK 0x3f000 +#define S7_P1_MASK 0xfc0000 +#define S8_P1_MASK 0x3f000000 +#define S8_P1_MASK_BKP 0x3f +#define S9_P1_MASK 0x3f +#define S9_P1_MASK_BKP 0xfc0 +#define S10_P1_MASK 0xfc0 +#define S10_P1_MASK_BKP 0x3f000 +#define CAL_SEL_0_1 0xc0000000 +#define CAL_SEL_2 0x40000000 +#define CAL_SEL_SHIFT 30 +#define CAL_SEL_SHIFT_2 28 + +#define S0_P1_SHIFT 8 +#define S1_P1_SHIFT 14 +#define S2_P1_SHIFT 20 +#define S3_P1_SHIFT 26 +#define S5_P1_SHIFT 6 +#define S6_P1_SHIFT 12 +#define S7_P1_SHIFT 18 +#define S8_P1_SHIFT 24 +#define S9_P1_BKP_SHIFT 6 +#define S10_P1_SHIFT 6 +#define S10_P1_BKP_SHIFT 12 + +#define BASE2_SHIFT 12 +#define BASE2_BKP_SHIFT 18 +#define S0_P2_SHIFT 20 +#define S0_P2_BKP_SHIFT 26 +#define S1_P2_SHIFT 26 +#define S2_P2_BKP_SHIFT 6 +#define S3_P2_SHIFT 6 +#define S3_P2_BKP_SHIFT 12 +#define S4_P2_SHIFT 12 +#define S4_P2_BKP_SHIFT 18 +#define S5_P2_SHIFT 18 +#define S5_P2_BKP_SHIFT 24 +#define S6_P2_SHIFT 24 +#define S7_P2_BKP_SHIFT 6 +#define S8_P2_SHIFT 6 +#define S8_P2_BKP_SHIFT 12 +#define S9_P2_SHIFT 12 +#define S9_P2_BKP_SHIFT 18 +#define S10_P2_SHIFT 18 +#define S10_P2_BKP_SHIFT 24 + +#define BASE2_MASK 0xff000 +#define BASE2_BKP_MASK 0xfc0000 +#define S0_P2_MASK 0x3f00000 +#define S0_P2_BKP_MASK 0xfc000000 +#define S1_P2_MASK 0xfc000000 +#define S1_P2_BKP_MASK 0x3f +#define S2_P2_MASK 0x3f +#define S2_P2_BKP_MASK 0xfc0 +#define S3_P2_MASK 0xfc0 +#define S3_P2_BKP_MASK 0x3f000 +#define S4_P2_MASK 0x3f000 +#define S4_P2_BKP_MASK 0xfc0000 +#define S5_P2_MASK 0xfc0000 +#define S5_P2_BKP_MASK 0x3f000000 +#define S6_P2_MASK 0x3f000000 +#define S6_P2_BKP_MASK 0x3f +#define S7_P2_MASK 0x3f +#define S7_P2_BKP_MASK 0xfc0 +#define S8_P2_MASK 0xfc0 +#define S8_P2_BKP_MASK 0x3f000 +#define S9_P2_MASK 0x3f000 +#define S9_P2_BKP_MASK 0xfc0000 +#define S10_P2_MASK 0xfc0000 +#define S10_P2_BKP_MASK 0x3f000000 + +#define BKP_SEL 0x3 +#define BKP_REDUN_SEL 0xe0000000 +#define BKP_REDUN_SHIFT 29 + +#define BIT_APPEND 0x3 + +static int calibrate_8974(struct tsens_device *tmdev) +{ + int base1 = 0, base2 = 0, i; + u32 p1[11], p2[11]; + int mode = 0; + u32 *calib, *bkp; + u32 calib_redun_sel; + + calib = (u32 *)qfprom_read(tmdev->dev, "calib"); + if (IS_ERR(calib)) + return PTR_ERR(calib); + + bkp = (u32 *)qfprom_read(tmdev->dev, "calib_backup"); + if (IS_ERR(bkp)) + return PTR_ERR(bkp); + + calib_redun_sel = bkp[1] & BKP_REDUN_SEL; + calib_redun_sel >>= BKP_REDUN_SHIFT; + + if (calib_redun_sel == BKP_SEL) { + mode = (calib[4] & CAL_SEL_0_1) >> CAL_SEL_SHIFT; + mode |= (calib[5] & CAL_SEL_2) >> CAL_SEL_SHIFT_2; + + switch (mode) { + case TWO_PT_CALIB: + base2 = (bkp[2] & BASE2_BKP_MASK) >> BASE2_BKP_SHIFT; + p2[0] = (bkp[2] & S0_P2_BKP_MASK) >> S0_P2_BKP_SHIFT; + p2[1] = (bkp[3] & S1_P2_BKP_MASK); + p2[2] = (bkp[3] & S2_P2_BKP_MASK) >> S2_P2_BKP_SHIFT; + p2[3] = (bkp[3] & S3_P2_BKP_MASK) >> S3_P2_BKP_SHIFT; + p2[4] = (bkp[3] & S4_P2_BKP_MASK) >> S4_P2_BKP_SHIFT; + p2[5] = (calib[4] & S5_P2_BKP_MASK) >> S5_P2_BKP_SHIFT; + p2[6] = (calib[5] & S6_P2_BKP_MASK); + p2[7] = (calib[5] & S7_P2_BKP_MASK) >> S7_P2_BKP_SHIFT; + p2[8] = (calib[5] & S8_P2_BKP_MASK) >> S8_P2_BKP_SHIFT; + p2[9] = (calib[5] & S9_P2_BKP_MASK) >> S9_P2_BKP_SHIFT; + p2[10] = (calib[5] & S10_P2_BKP_MASK) >> S10_P2_BKP_SHIFT; + /* Fall through */ + case ONE_PT_CALIB: + case ONE_PT_CALIB2: + base1 = bkp[0] & BASE1_MASK; + p1[0] = (bkp[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (bkp[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (bkp[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (bkp[0] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (bkp[1] & S4_P1_MASK); + p1[5] = (bkp[1] & S5_P1_MASK) >> S5_P1_SHIFT; + p1[6] = (bkp[1] & S6_P1_MASK) >> S6_P1_SHIFT; + p1[7] = (bkp[1] & S7_P1_MASK) >> S7_P1_SHIFT; + p1[8] = (bkp[2] & S8_P1_MASK_BKP) >> S8_P1_SHIFT; + p1[9] = (bkp[2] & S9_P1_MASK_BKP) >> S9_P1_BKP_SHIFT; + p1[10] = (bkp[2] & S10_P1_MASK_BKP) >> S10_P1_BKP_SHIFT; + break; + } + } else { + mode = (calib[1] & CAL_SEL_0_1) >> CAL_SEL_SHIFT; + mode |= (calib[3] & CAL_SEL_2) >> CAL_SEL_SHIFT_2; + + switch (mode) { + case TWO_PT_CALIB: + base2 = (calib[2] & BASE2_MASK) >> BASE2_SHIFT; + p2[0] = (calib[2] & S0_P2_MASK) >> S0_P2_SHIFT; + p2[1] = (calib[2] & S1_P2_MASK) >> S1_P2_SHIFT; + p2[2] = (calib[3] & S2_P2_MASK); + p2[3] = (calib[3] & S3_P2_MASK) >> S3_P2_SHIFT; + p2[4] = (calib[3] & S4_P2_MASK) >> S4_P2_SHIFT; + p2[5] = (calib[3] & S5_P2_MASK) >> S5_P2_SHIFT; + p2[6] = (calib[3] & S6_P2_MASK) >> S6_P2_SHIFT; + p2[7] = (calib[4] & S7_P2_MASK); + p2[8] = (calib[4] & S8_P2_MASK) >> S8_P2_SHIFT; + p2[9] = (calib[4] & S9_P2_MASK) >> S9_P2_SHIFT; + p2[10] = (calib[4] & S10_P2_MASK) >> S10_P2_SHIFT; + /* Fall through */ + case ONE_PT_CALIB: + case ONE_PT_CALIB2: + base1 = calib[0] & BASE1_MASK; + p1[0] = (calib[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (calib[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (calib[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (calib[0] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (calib[1] & S4_P1_MASK); + p1[5] = (calib[1] & S5_P1_MASK) >> S5_P1_SHIFT; + p1[6] = (calib[1] & S6_P1_MASK) >> S6_P1_SHIFT; + p1[7] = (calib[1] & S7_P1_MASK) >> S7_P1_SHIFT; + p1[8] = (calib[1] & S8_P1_MASK) >> S8_P1_SHIFT; + p1[9] = (calib[2] & S9_P1_MASK); + p1[10] = (calib[2] & S10_P1_MASK) >> S10_P1_SHIFT; + break; + } + } + + switch (mode) { + case ONE_PT_CALIB: + for (i = 0; i < tmdev->num_sensors; i++) + p1[i] += (base1 << 2) | BIT_APPEND; + break; + case TWO_PT_CALIB: + for (i = 0; i < tmdev->num_sensors; i++) { + p2[i] += base2; + p2[i] <<= 2; + p2[i] |= BIT_APPEND; + } + /* Fall through */ + case ONE_PT_CALIB2: + for (i = 0; i < tmdev->num_sensors; i++) { + p1[i] += base1; + p1[i] <<= 2; + p1[i] |= BIT_APPEND; + } + break; + default: + for (i = 0; i < tmdev->num_sensors; i++) + p2[i] = 780; + p1[0] = 502; + p1[1] = 509; + p1[2] = 503; + p1[3] = 509; + p1[4] = 505; + p1[5] = 509; + p1[6] = 507; + p1[7] = 510; + p1[8] = 508; + p1[9] = 509; + p1[10] = 508; + break; + } + + compute_intercept_slope(tmdev, p1, p2, mode); + + return 0; +} + +static const struct tsens_ops ops_8974 = { + .init = init_common, + .calibrate = calibrate_8974, + .get_temp = get_temp_common, +}; + +const struct tsens_data data_8974 = { + .num_sensors = 11, + .ops = &ops_8974, +}; diff --git a/drivers/thermal/qcom/tsens-8996.c b/drivers/thermal/qcom/tsens-8996.c new file mode 100644 index 000000000000..e1f77818d8fa --- /dev/null +++ b/drivers/thermal/qcom/tsens-8996.c @@ -0,0 +1,84 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include "tsens.h" + +#define STATUS_OFFSET 0x10a0 +#define LAST_TEMP_MASK 0xfff +#define STATUS_VALID_BIT BIT(21) +#define CODE_SIGN_BIT BIT(11) + +static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp) +{ + struct tsens_sensor *s = &tmdev->sensor[id]; + u32 code; + unsigned int sensor_addr; + int last_temp = 0, last_temp2 = 0, last_temp3 = 0, ret; + + sensor_addr = STATUS_OFFSET + s->hw_id * 4; + ret = regmap_read(tmdev->map, sensor_addr, &code); + if (ret) + return ret; + last_temp = code & LAST_TEMP_MASK; + if (code & STATUS_VALID_BIT) + goto done; + + /* Try a second time */ + ret = regmap_read(tmdev->map, sensor_addr, &code); + if (ret) + return ret; + if (code & STATUS_VALID_BIT) { + last_temp = code & LAST_TEMP_MASK; + goto done; + } else { + last_temp2 = code & LAST_TEMP_MASK; + } + + /* Try a third/last time */ + ret = regmap_read(tmdev->map, sensor_addr, &code); + if (ret) + return ret; + if (code & STATUS_VALID_BIT) { + last_temp = code & LAST_TEMP_MASK; + goto done; + } else { + last_temp3 = code & LAST_TEMP_MASK; + } + + if (last_temp == last_temp2) + last_temp = last_temp2; + else if (last_temp2 == last_temp3) + last_temp = last_temp3; +done: + /* Code sign bit is the sign extension for a negative value */ + if (last_temp & CODE_SIGN_BIT) + last_temp |= ~CODE_SIGN_BIT; + + /* Temperatures are in deciCelicius */ + *temp = last_temp * 100; + + return 0; +} + +static const struct tsens_ops ops_8996 = { + .init = init_common, + .get_temp = get_temp_8996, +}; + +const struct tsens_data data_8996 = { + .num_sensors = 13, + .ops = &ops_8996, +}; diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c new file mode 100644 index 000000000000..b1449ad67fc0 --- /dev/null +++ b/drivers/thermal/qcom/tsens-common.c @@ -0,0 +1,141 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/nvmem-consumer.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include "tsens.h" + +#define S0_ST_ADDR 0x1030 +#define SN_ADDR_OFFSET 0x4 +#define SN_ST_TEMP_MASK 0x3ff +#define CAL_DEGC_PT1 30 +#define CAL_DEGC_PT2 120 +#define SLOPE_FACTOR 1000 +#define SLOPE_DEFAULT 3200 + +char *qfprom_read(struct device *dev, const char *cname) +{ + struct nvmem_cell *cell; + ssize_t data; + char *ret; + + cell = nvmem_cell_get(dev, cname); + if (IS_ERR(cell)) + return ERR_CAST(cell); + + ret = nvmem_cell_read(cell, &data); + nvmem_cell_put(cell); + + return ret; +} + +/* + * Use this function on devices where slope and offset calculations + * depend on calibration data read from qfprom. On others the slope + * and offset values are derived from tz->tzp->slope and tz->tzp->offset + * resp. + */ +void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1, + u32 *p2, u32 mode) +{ + int i; + int num, den; + + for (i = 0; i < tmdev->num_sensors; i++) { + dev_dbg(tmdev->dev, + "sensor%d - data_point1:%#x data_point2:%#x\n", + i, p1[i], p2[i]); + + tmdev->sensor[i].slope = SLOPE_DEFAULT; + if (mode == TWO_PT_CALIB) { + /* + * slope (m) = adc_code2 - adc_code1 (y2 - y1)/ + * temp_120_degc - temp_30_degc (x2 - x1) + */ + num = p2[i] - p1[i]; + num *= SLOPE_FACTOR; + den = CAL_DEGC_PT2 - CAL_DEGC_PT1; + tmdev->sensor[i].slope = num / den; + } + + tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - + (CAL_DEGC_PT1 * + tmdev->sensor[i].slope); + dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset); + } +} + +static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) +{ + int degc, num, den; + + num = (adc_code * SLOPE_FACTOR) - s->offset; + den = s->slope; + + if (num > 0) + degc = num + (den / 2); + else if (num < 0) + degc = num - (den / 2); + else + degc = num; + + degc /= den; + + return degc; +} + +int get_temp_common(struct tsens_device *tmdev, int id, int *temp) +{ + struct tsens_sensor *s = &tmdev->sensor[id]; + u32 code; + unsigned int sensor_addr; + int last_temp = 0, ret; + + sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET; + ret = regmap_read(tmdev->map, sensor_addr, &code); + if (ret) + return ret; + last_temp = code & SN_ST_TEMP_MASK; + + *temp = code_to_degc(last_temp, s) * 1000; + + return 0; +} + +static const struct regmap_config tsens_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +int __init init_common(struct tsens_device *tmdev) +{ + void __iomem *base; + + base = of_iomap(tmdev->dev->of_node, 0); + if (!base) + return -EINVAL; + + tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config); + if (IS_ERR(tmdev->map)) { + iounmap(base); + return PTR_ERR(tmdev->map); + } + + return 0; +} diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c new file mode 100644 index 000000000000..3f9fe6aa51cc --- /dev/null +++ b/drivers/thermal/qcom/tsens.c @@ -0,0 +1,200 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/thermal.h> +#include "tsens.h" + +static int tsens_get_temp(void *data, int *temp) +{ + const struct tsens_sensor *s = data; + struct tsens_device *tmdev = s->tmdev; + + return tmdev->ops->get_temp(tmdev, s->id, temp); +} + +static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend) +{ + const struct tsens_sensor *s = p; + struct tsens_device *tmdev = s->tmdev; + + if (tmdev->ops->get_trend) + return tmdev->ops->get_trend(tmdev, s->id, trend); + + return -ENOTSUPP; +} + +static int __maybe_unused tsens_suspend(struct device *dev) +{ + struct tsens_device *tmdev = dev_get_drvdata(dev); + + if (tmdev->ops && tmdev->ops->suspend) + return tmdev->ops->suspend(tmdev); + + return 0; +} + +static int __maybe_unused tsens_resume(struct device *dev) +{ + struct tsens_device *tmdev = dev_get_drvdata(dev); + + if (tmdev->ops && tmdev->ops->resume) + return tmdev->ops->resume(tmdev); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); + +static const struct of_device_id tsens_table[] = { + { + .compatible = "qcom,msm8916-tsens", + .data = &data_8916, + }, { + .compatible = "qcom,msm8974-tsens", + .data = &data_8974, + }, { + .compatible = "qcom,msm8996-tsens", + .data = &data_8996, + }, + {} +}; +MODULE_DEVICE_TABLE(of, tsens_table); + +static const struct thermal_zone_of_device_ops tsens_of_ops = { + .get_temp = tsens_get_temp, + .get_trend = tsens_get_trend, +}; + +static int tsens_register(struct tsens_device *tmdev) +{ + int i; + struct thermal_zone_device *tzd; + u32 *hw_id, n = tmdev->num_sensors; + + hw_id = devm_kcalloc(tmdev->dev, n, sizeof(u32), GFP_KERNEL); + if (!hw_id) + return -ENOMEM; + + for (i = 0; i < tmdev->num_sensors; i++) { + tmdev->sensor[i].tmdev = tmdev; + tmdev->sensor[i].id = i; + tzd = devm_thermal_zone_of_sensor_register(tmdev->dev, i, + &tmdev->sensor[i], + &tsens_of_ops); + if (IS_ERR(tzd)) + continue; + tmdev->sensor[i].tzd = tzd; + if (tmdev->ops->enable) + tmdev->ops->enable(tmdev, i); + } + return 0; +} + +static int tsens_probe(struct platform_device *pdev) +{ + int ret, i; + struct device *dev; + struct device_node *np; + struct tsens_sensor *s; + struct tsens_device *tmdev; + const struct tsens_data *data; + const struct of_device_id *id; + + if (pdev->dev.of_node) + dev = &pdev->dev; + else + dev = pdev->dev.parent; + + np = dev->of_node; + + id = of_match_node(tsens_table, np); + if (id) + data = id->data; + else + data = &data_8960; + + if (data->num_sensors <= 0) { + dev_err(dev, "invalid number of sensors\n"); + return -EINVAL; + } + + tmdev = devm_kzalloc(dev, sizeof(*tmdev) + + data->num_sensors * sizeof(*s), GFP_KERNEL); + if (!tmdev) + return -ENOMEM; + + tmdev->dev = dev; + tmdev->num_sensors = data->num_sensors; + tmdev->ops = data->ops; + for (i = 0; i < tmdev->num_sensors; i++) { + if (data->hw_ids) + tmdev->sensor[i].hw_id = data->hw_ids[i]; + else + tmdev->sensor[i].hw_id = i; + } + + if (!tmdev->ops || !tmdev->ops->init || !tmdev->ops->get_temp) + return -EINVAL; + + ret = tmdev->ops->init(tmdev); + if (ret < 0) { + dev_err(dev, "tsens init failed\n"); + return ret; + } + + if (tmdev->ops->calibrate) { + ret = tmdev->ops->calibrate(tmdev); + if (ret < 0) { + dev_err(dev, "tsens calibration failed\n"); + return ret; + } + } + + ret = tsens_register(tmdev); + + platform_set_drvdata(pdev, tmdev); + + return ret; +} + +static int tsens_remove(struct platform_device *pdev) +{ + struct tsens_device *tmdev = platform_get_drvdata(pdev); + + if (tmdev->ops->disable) + tmdev->ops->disable(tmdev); + + return 0; +} + +static struct platform_driver tsens_driver = { + .probe = tsens_probe, + .remove = tsens_remove, + .driver = { + .name = "qcom-tsens", + .pm = &tsens_pm_ops, + .of_match_table = tsens_table, + }, +}; +module_platform_driver(tsens_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("QCOM Temperature Sensor driver"); +MODULE_ALIAS("platform:qcom-tsens"); diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h new file mode 100644 index 000000000000..911c1978892b --- /dev/null +++ b/drivers/thermal/qcom/tsens.h @@ -0,0 +1,94 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __QCOM_TSENS_H__ +#define __QCOM_TSENS_H__ + +#define ONE_PT_CALIB 0x1 +#define ONE_PT_CALIB2 0x2 +#define TWO_PT_CALIB 0x3 + +#include <linux/thermal.h> + +struct tsens_device; + +struct tsens_sensor { + struct tsens_device *tmdev; + struct thermal_zone_device *tzd; + int offset; + int id; + int hw_id; + int slope; + u32 status; +}; + +/** + * struct tsens_ops - operations as supported by the tsens device + * @init: Function to initialize the tsens device + * @calibrate: Function to calibrate the tsens device + * @get_temp: Function which returns the temp in millidegC + * @enable: Function to enable (clocks/power) tsens device + * @disable: Function to disable the tsens device + * @suspend: Function to suspend the tsens device + * @resume: Function to resume the tsens device + * @get_trend: Function to get the thermal/temp trend + */ +struct tsens_ops { + /* mandatory callbacks */ + int (*init)(struct tsens_device *); + int (*calibrate)(struct tsens_device *); + int (*get_temp)(struct tsens_device *, int, int *); + /* optional callbacks */ + int (*enable)(struct tsens_device *, int); + void (*disable)(struct tsens_device *); + int (*suspend)(struct tsens_device *); + int (*resume)(struct tsens_device *); + int (*get_trend)(struct tsens_device *, int, enum thermal_trend *); +}; + +/** + * struct tsens_data - tsens instance specific data + * @num_sensors: Max number of sensors supported by platform + * @ops: operations the tsens instance supports + * @hw_ids: Subset of sensors ids supported by platform, if not the first n + */ +struct tsens_data { + const u32 num_sensors; + const struct tsens_ops *ops; + unsigned int *hw_ids; +}; + +/* Registers to be saved/restored across a context loss */ +struct tsens_context { + int threshold; + int control; +}; + +struct tsens_device { + struct device *dev; + u32 num_sensors; + struct regmap *map; + struct regmap_field *status_field; + struct tsens_context ctx; + bool trdy; + const struct tsens_ops *ops; + struct tsens_sensor sensor[0]; +}; + +char *qfprom_read(struct device *, const char *); +void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32); +int init_common(struct tsens_device *); +int get_temp_common(struct tsens_device *, int, int *); + +extern const struct tsens_data data_8916, data_8974, data_8960, data_8996; + +#endif /* __QCOM_TSENS_H__ */ diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c new file mode 100644 index 000000000000..644ba526d9ea --- /dev/null +++ b/drivers/thermal/qoriq_thermal.c @@ -0,0 +1,328 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/thermal.h> + +#include "thermal_core.h" + +#define SITES_MAX 16 + +/* + * QorIQ TMU Registers + */ +struct qoriq_tmu_site_regs { + u32 tritsr; /* Immediate Temperature Site Register */ + u32 tratsr; /* Average Temperature Site Register */ + u8 res0[0x8]; +}; + +struct qoriq_tmu_regs { + u32 tmr; /* Mode Register */ +#define TMR_DISABLE 0x0 +#define TMR_ME 0x80000000 +#define TMR_ALPF 0x0c000000 + u32 tsr; /* Status Register */ + u32 tmtmir; /* Temperature measurement interval Register */ +#define TMTMIR_DEFAULT 0x0000000f + u8 res0[0x14]; + u32 tier; /* Interrupt Enable Register */ +#define TIER_DISABLE 0x0 + u32 tidr; /* Interrupt Detect Register */ + u32 tiscr; /* Interrupt Site Capture Register */ + u32 ticscr; /* Interrupt Critical Site Capture Register */ + u8 res1[0x10]; + u32 tmhtcrh; /* High Temperature Capture Register */ + u32 tmhtcrl; /* Low Temperature Capture Register */ + u8 res2[0x8]; + u32 tmhtitr; /* High Temperature Immediate Threshold */ + u32 tmhtatr; /* High Temperature Average Threshold */ + u32 tmhtactr; /* High Temperature Average Crit Threshold */ + u8 res3[0x24]; + u32 ttcfgr; /* Temperature Configuration Register */ + u32 tscfgr; /* Sensor Configuration Register */ + u8 res4[0x78]; + struct qoriq_tmu_site_regs site[SITES_MAX]; + u8 res5[0x9f8]; + u32 ipbrr0; /* IP Block Revision Register 0 */ + u32 ipbrr1; /* IP Block Revision Register 1 */ + u8 res6[0x310]; + u32 ttr0cr; /* Temperature Range 0 Control Register */ + u32 ttr1cr; /* Temperature Range 1 Control Register */ + u32 ttr2cr; /* Temperature Range 2 Control Register */ + u32 ttr3cr; /* Temperature Range 3 Control Register */ +}; + +/* + * Thermal zone data + */ +struct qoriq_tmu_data { + struct thermal_zone_device *tz; + struct qoriq_tmu_regs __iomem *regs; + int sensor_id; + bool little_endian; +}; + +static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr) +{ + if (p->little_endian) + iowrite32(val, addr); + else + iowrite32be(val, addr); +} + +static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr) +{ + if (p->little_endian) + return ioread32(addr); + else + return ioread32be(addr); +} + +static int tmu_get_temp(void *p, int *temp) +{ + u32 val; + struct qoriq_tmu_data *data = p; + + val = tmu_read(data, &data->regs->site[data->sensor_id].tritsr); + *temp = (val & 0xff) * 1000; + + return 0; +} + +static int qoriq_tmu_get_sensor_id(void) +{ + int ret, id; + struct of_phandle_args sensor_specs; + struct device_node *np, *sensor_np; + + np = of_find_node_by_name(NULL, "thermal-zones"); + if (!np) + return -ENODEV; + + sensor_np = of_get_next_child(np, NULL); + ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors", + "#thermal-sensor-cells", + 0, &sensor_specs); + if (ret) { + of_node_put(np); + of_node_put(sensor_np); + return ret; + } + + if (sensor_specs.args_count >= 1) { + id = sensor_specs.args[0]; + WARN(sensor_specs.args_count > 1, + "%s: too many cells in sensor specifier %d\n", + sensor_specs.np->name, sensor_specs.args_count); + } else { + id = 0; + } + + of_node_put(np); + of_node_put(sensor_np); + + return id; +} + +static int qoriq_tmu_calibration(struct platform_device *pdev) +{ + int i, val, len; + u32 range[4]; + const u32 *calibration; + struct device_node *np = pdev->dev.of_node; + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); + + if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) { + dev_err(&pdev->dev, "missing calibration range.\n"); + return -ENODEV; + } + + /* Init temperature range registers */ + tmu_write(data, range[0], &data->regs->ttr0cr); + tmu_write(data, range[1], &data->regs->ttr1cr); + tmu_write(data, range[2], &data->regs->ttr2cr); + tmu_write(data, range[3], &data->regs->ttr3cr); + + calibration = of_get_property(np, "fsl,tmu-calibration", &len); + if (calibration == NULL || len % 8) { + dev_err(&pdev->dev, "invalid calibration data.\n"); + return -ENODEV; + } + + for (i = 0; i < len; i += 8, calibration += 2) { + val = of_read_number(calibration, 1); + tmu_write(data, val, &data->regs->ttcfgr); + val = of_read_number(calibration + 1, 1); + tmu_write(data, val, &data->regs->tscfgr); + } + + return 0; +} + +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) +{ + /* Disable interrupt, using polling instead */ + tmu_write(data, TIER_DISABLE, &data->regs->tier); + + /* Set update_interval */ + tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir); + + /* Disable monitoring */ + tmu_write(data, TMR_DISABLE, &data->regs->tmr); +} + +static struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int qoriq_tmu_probe(struct platform_device *pdev) +{ + int ret; + const struct thermal_trip *trip; + struct qoriq_tmu_data *data; + struct device_node *np = pdev->dev.of_node; + u32 site = 0; + + if (!np) { + dev_err(&pdev->dev, "Device OF-Node is NULL"); + return -ENODEV; + } + + data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + platform_set_drvdata(pdev, data); + + data->little_endian = of_property_read_bool(np, "little-endian"); + + data->sensor_id = qoriq_tmu_get_sensor_id(); + if (data->sensor_id < 0) { + dev_err(&pdev->dev, "Failed to get sensor id\n"); + ret = -ENODEV; + goto err_iomap; + } + + data->regs = of_iomap(np, 0); + if (!data->regs) { + dev_err(&pdev->dev, "Failed to get memory region\n"); + ret = -ENODEV; + goto err_iomap; + } + + qoriq_tmu_init_device(data); /* TMU initialization */ + + ret = qoriq_tmu_calibration(pdev); /* TMU calibration */ + if (ret < 0) + goto err_tmu; + + data->tz = thermal_zone_of_sensor_register(&pdev->dev, data->sensor_id, + data, &tmu_tz_ops); + if (IS_ERR(data->tz)) { + ret = PTR_ERR(data->tz); + dev_err(&pdev->dev, + "Failed to register thermal zone device %d\n", ret); + goto err_tmu; + } + + trip = of_thermal_get_trip_points(data->tz); + + /* Enable monitoring */ + site |= 0x1 << (15 - data->sensor_id); + tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr); + + return 0; + +err_tmu: + iounmap(data->regs); + +err_iomap: + platform_set_drvdata(pdev, NULL); + + return ret; +} + +static int qoriq_tmu_remove(struct platform_device *pdev) +{ + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); + + thermal_zone_of_sensor_unregister(&pdev->dev, data->tz); + + /* Disable monitoring */ + tmu_write(data, TMR_DISABLE, &data->regs->tmr); + + iounmap(data->regs); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int qoriq_tmu_suspend(struct device *dev) +{ + u32 tmr; + struct qoriq_tmu_data *data = dev_get_drvdata(dev); + + /* Disable monitoring */ + tmr = tmu_read(data, &data->regs->tmr); + tmr &= ~TMR_ME; + tmu_write(data, tmr, &data->regs->tmr); + + return 0; +} + +static int qoriq_tmu_resume(struct device *dev) +{ + u32 tmr; + struct qoriq_tmu_data *data = dev_get_drvdata(dev); + + /* Enable monitoring */ + tmr = tmu_read(data, &data->regs->tmr); + tmr |= TMR_ME; + tmu_write(data, tmr, &data->regs->tmr); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops, + qoriq_tmu_suspend, qoriq_tmu_resume); + +static const struct of_device_id qoriq_tmu_match[] = { + { .compatible = "fsl,qoriq-tmu", }, + {}, +}; +MODULE_DEVICE_TABLE(of, qoriq_tmu_match); + +static struct platform_driver qoriq_tmu = { + .driver = { + .name = "qoriq_thermal", + .pm = &qoriq_tmu_pm_ops, + .of_match_table = qoriq_tmu_match, + }, + .probe = qoriq_tmu_probe, + .remove = qoriq_tmu_remove, +}; +module_platform_driver(qoriq_tmu); + +MODULE_AUTHOR("Jia Hongtao <hongtao.jia@nxp.com>"); +MODULE_DESCRIPTION("QorIQ Thermal Monitoring Unit driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index 5f817923f374..73e5fee6cf1d 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -31,6 +31,8 @@ #include <linux/spinlock.h> #include <linux/thermal.h> +#include "thermal_hwmon.h" + #define IDLE_INTERVAL 5000 #define COMMON_STR 0x00 @@ -75,6 +77,8 @@ struct rcar_thermal_priv { #define rcar_priv_to_dev(priv) ((priv)->common->dev) #define rcar_has_irq_support(priv) ((priv)->common->base) #define rcar_id_to_shift(priv) ((priv)->id * 8) +#define rcar_of_data(dev) ((unsigned long)of_device_get_match_data(dev)) +#define rcar_use_of_thermal(dev) (rcar_of_data(dev) == USE_OF_THERMAL) #define USE_OF_THERMAL 1 static const struct of_device_id rcar_thermal_dt_ids[] = { @@ -354,7 +358,8 @@ static void rcar_thermal_work(struct work_struct *work) return; if (nctemp != cctemp) - thermal_zone_device_update(priv->zone); + thermal_zone_device_update(priv->zone, + THERMAL_EVENT_UNSPECIFIED); } static u32 rcar_thermal_had_changed(struct rcar_thermal_priv *priv, u32 status) @@ -415,7 +420,10 @@ static int rcar_thermal_remove(struct platform_device *pdev) rcar_thermal_for_each_priv(priv, common) { rcar_thermal_irq_disable(priv); - thermal_zone_device_unregister(priv->zone); + if (rcar_use_of_thermal(dev)) + thermal_remove_hwmon_sysfs(priv->zone); + else + thermal_zone_device_unregister(priv->zone); } pm_runtime_put(dev); @@ -430,7 +438,6 @@ static int rcar_thermal_probe(struct platform_device *pdev) struct rcar_thermal_priv *priv; struct device *dev = &pdev->dev; struct resource *res, *irq; - unsigned long of_data = (unsigned long)of_device_get_match_data(dev); int mres = 0; int i; int ret = -ENODEV; @@ -491,7 +498,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) if (ret < 0) goto error_unregister; - if (of_data == USE_OF_THERMAL) + if (rcar_use_of_thermal(dev)) priv->zone = devm_thermal_zone_of_sensor_register( dev, i, priv, &rcar_thermal_zone_of_ops); @@ -508,6 +515,17 @@ static int rcar_thermal_probe(struct platform_device *pdev) goto error_unregister; } + if (rcar_use_of_thermal(dev)) { + /* + * thermal_zone doesn't enable hwmon as default, + * but, enable it here to keep compatible + */ + priv->zone->tzp->no_hwmon = false; + ret = thermal_add_hwmon_sysfs(priv->zone); + if (ret) + goto error_unregister; + } + rcar_thermal_irq_enable(priv); list_move_tail(&priv->list, &common->head); diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 5d491f16a866..e227a9f0acf7 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -96,6 +96,7 @@ struct chip_tsadc_table { * @initialize: SoC special initialize tsadc controller method * @irq_ack: clear the interrupt * @get_temp: get the temperature + * @set_alarm_temp: set the high temperature interrupt * @set_tshut_temp: set the hardware-controlled shutdown temperature * @set_tshut_mode: set the hardware-controlled shutdown mode * @table: the chip-specific conversion table @@ -119,6 +120,8 @@ struct rockchip_tsadc_chip { /* Per-sensor methods */ int (*get_temp)(struct chip_tsadc_table table, int chn, void __iomem *reg, int *temp); + void (*set_alarm_temp)(struct chip_tsadc_table table, + int chn, void __iomem *reg, int temp); void (*set_tshut_temp)(struct chip_tsadc_table table, int chn, void __iomem *reg, int temp); void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m); @@ -183,6 +186,7 @@ struct rockchip_thermal_data { #define TSADCV2_INT_EN 0x08 #define TSADCV2_INT_PD 0x0c #define TSADCV2_DATA(chn) (0x20 + (chn) * 0x04) +#define TSADCV2_COMP_INT(chn) (0x30 + (chn) * 0x04) #define TSADCV2_COMP_SHUT(chn) (0x40 + (chn) * 0x04) #define TSADCV2_HIGHT_INT_DEBOUNCE 0x60 #define TSADCV2_HIGHT_TSHUT_DEBOUNCE 0x64 @@ -207,18 +211,21 @@ struct rockchip_thermal_data { #define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT 4 #define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT 4 -#define TSADCV2_AUTO_PERIOD_TIME 250 /* msec */ -#define TSADCV2_AUTO_PERIOD_HT_TIME 50 /* msec */ +#define TSADCV2_AUTO_PERIOD_TIME 250 /* 250ms */ +#define TSADCV2_AUTO_PERIOD_HT_TIME 50 /* 50ms */ +#define TSADCV3_AUTO_PERIOD_TIME 1875 /* 2.5ms */ +#define TSADCV3_AUTO_PERIOD_HT_TIME 1875 /* 2.5ms */ + #define TSADCV2_USER_INTER_PD_SOC 0x340 /* 13 clocks */ #define GRF_SARADC_TESTBIT 0x0e644 #define GRF_TSADC_TESTBIT_L 0x0e648 #define GRF_TSADC_TESTBIT_H 0x0e64c -#define GRF_TSADC_TSEN_PD_ON (0x30003 << 0) -#define GRF_TSADC_TSEN_PD_OFF (0x30000 << 0) #define GRF_SARADC_TESTBIT_ON (0x10001 << 2) #define GRF_TSADC_TESTBIT_H_ON (0x10001 << 2) +#define GRF_TSADC_VCM_EN_L (0x10001 << 7) +#define GRF_TSADC_VCM_EN_H (0x10001 << 7) /** * struct tsadc_table - code to temperature conversion table @@ -394,13 +401,17 @@ static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table, int temp) { int high, low, mid; + u32 error = 0; low = 0; high = table.length - 1; mid = (high + low) / 2; - if (temp < table.id[low].temp || temp > table.id[high].temp) - return 0; + /* Return mask code data when the temp is over table range */ + if (temp < table.id[low].temp || temp > table.id[high].temp) { + error = table.data_mask; + goto exit; + } while (low <= high) { if (temp == table.id[mid].temp) @@ -412,7 +423,9 @@ static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table, mid = (low + high) / 2; } - return 0; +exit: + pr_err("Invalid the conversion, error=%d\n", error); + return error; } static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, @@ -543,14 +556,34 @@ static void rk_tsadcv3_initialize(struct regmap *grf, void __iomem *regs, /* Set interleave value to workround ic time sync issue */ writel_relaxed(TSADCV2_USER_INTER_PD_SOC, regs + TSADCV2_USER_CON); + + writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, + regs + TSADCV2_AUTO_PERIOD); + writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT, + regs + TSADCV2_HIGHT_INT_DEBOUNCE); + writel_relaxed(TSADCV2_AUTO_PERIOD_HT_TIME, + regs + TSADCV2_AUTO_PERIOD_HT); + writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT, + regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE); + } else { - regmap_write(grf, GRF_TSADC_TESTBIT_L, GRF_TSADC_TSEN_PD_ON); - mdelay(10); - regmap_write(grf, GRF_TSADC_TESTBIT_L, GRF_TSADC_TSEN_PD_OFF); + /* Enable the voltage common mode feature */ + regmap_write(grf, GRF_TSADC_TESTBIT_L, GRF_TSADC_VCM_EN_L); + regmap_write(grf, GRF_TSADC_TESTBIT_H, GRF_TSADC_VCM_EN_H); + usleep_range(15, 100); /* The spec note says at least 15 us */ regmap_write(grf, GRF_SARADC_TESTBIT, GRF_SARADC_TESTBIT_ON); regmap_write(grf, GRF_TSADC_TESTBIT_H, GRF_TSADC_TESTBIT_H_ON); usleep_range(90, 200); /* The spec note says at least 90 us */ + + writel_relaxed(TSADCV3_AUTO_PERIOD_TIME, + regs + TSADCV2_AUTO_PERIOD); + writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT, + regs + TSADCV2_HIGHT_INT_DEBOUNCE); + writel_relaxed(TSADCV3_AUTO_PERIOD_HT_TIME, + regs + TSADCV2_AUTO_PERIOD_HT); + writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT, + regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE); } if (tshut_polarity == TSHUT_HIGH_ACTIVE) @@ -559,14 +592,6 @@ static void rk_tsadcv3_initialize(struct regmap *grf, void __iomem *regs, else writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH, regs + TSADCV2_AUTO_CON); - - writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD); - writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT, - regs + TSADCV2_HIGHT_INT_DEBOUNCE); - writel_relaxed(TSADCV2_AUTO_PERIOD_HT_TIME, - regs + TSADCV2_AUTO_PERIOD_HT); - writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT, - regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE); } static void rk_tsadcv2_irq_ack(void __iomem *regs) @@ -628,12 +653,34 @@ static int rk_tsadcv2_get_temp(struct chip_tsadc_table table, return rk_tsadcv2_code_to_temp(table, val, temp); } +static void rk_tsadcv2_alarm_temp(struct chip_tsadc_table table, + int chn, void __iomem *regs, int temp) +{ + u32 alarm_value, int_en; + + /* Make sure the value is valid */ + alarm_value = rk_tsadcv2_temp_to_code(table, temp); + if (alarm_value == table.data_mask) + return; + + writel_relaxed(alarm_value & table.data_mask, + regs + TSADCV2_COMP_INT(chn)); + + int_en = readl_relaxed(regs + TSADCV2_INT_EN); + int_en |= TSADCV2_INT_SRC_EN(chn); + writel_relaxed(int_en, regs + TSADCV2_INT_EN); +} + static void rk_tsadcv2_tshut_temp(struct chip_tsadc_table table, int chn, void __iomem *regs, int temp) { u32 tshut_value, val; + /* Make sure the value is valid */ tshut_value = rk_tsadcv2_temp_to_code(table, temp); + if (tshut_value == table.data_mask) + return; + writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn)); /* TSHUT will be valid */ @@ -670,6 +717,7 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = { .irq_ack = rk_tsadcv3_irq_ack, .control = rk_tsadcv3_control, .get_temp = rk_tsadcv2_get_temp, + .set_alarm_temp = rk_tsadcv2_alarm_temp, .set_tshut_temp = rk_tsadcv2_tshut_temp, .set_tshut_mode = rk_tsadcv2_tshut_mode, @@ -694,6 +742,7 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = { .irq_ack = rk_tsadcv2_irq_ack, .control = rk_tsadcv2_control, .get_temp = rk_tsadcv2_get_temp, + .set_alarm_temp = rk_tsadcv2_alarm_temp, .set_tshut_temp = rk_tsadcv2_tshut_temp, .set_tshut_mode = rk_tsadcv2_tshut_mode, @@ -718,6 +767,7 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = { .irq_ack = rk_tsadcv3_irq_ack, .control = rk_tsadcv3_control, .get_temp = rk_tsadcv2_get_temp, + .set_alarm_temp = rk_tsadcv2_alarm_temp, .set_tshut_temp = rk_tsadcv2_tshut_temp, .set_tshut_mode = rk_tsadcv2_tshut_mode, @@ -742,6 +792,7 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = { .irq_ack = rk_tsadcv2_irq_ack, .control = rk_tsadcv2_control, .get_temp = rk_tsadcv2_get_temp, + .set_alarm_temp = rk_tsadcv2_alarm_temp, .set_tshut_temp = rk_tsadcv2_tshut_temp, .set_tshut_mode = rk_tsadcv2_tshut_mode, @@ -766,6 +817,7 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = { .irq_ack = rk_tsadcv3_irq_ack, .control = rk_tsadcv3_control, .get_temp = rk_tsadcv2_get_temp, + .set_alarm_temp = rk_tsadcv2_alarm_temp, .set_tshut_temp = rk_tsadcv2_tshut_temp, .set_tshut_mode = rk_tsadcv2_tshut_mode, @@ -821,11 +873,27 @@ static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev) thermal->chip->irq_ack(thermal->regs); for (i = 0; i < thermal->chip->chn_num; i++) - thermal_zone_device_update(thermal->sensors[i].tzd); + thermal_zone_device_update(thermal->sensors[i].tzd, + THERMAL_EVENT_UNSPECIFIED); return IRQ_HANDLED; } +static int rockchip_thermal_set_trips(void *_sensor, int low, int high) +{ + struct rockchip_thermal_sensor *sensor = _sensor; + struct rockchip_thermal_data *thermal = sensor->thermal; + const struct rockchip_tsadc_chip *tsadc = thermal->chip; + + dev_dbg(&thermal->pdev->dev, "%s: sensor %d: low: %d, high %d\n", + __func__, sensor->id, low, high); + + tsadc->set_alarm_temp(tsadc->table, + sensor->id, thermal->regs, high); + + return 0; +} + static int rockchip_thermal_get_temp(void *_sensor, int *out_temp) { struct rockchip_thermal_sensor *sensor = _sensor; @@ -843,6 +911,7 @@ static int rockchip_thermal_get_temp(void *_sensor, int *out_temp) static const struct thermal_zone_of_device_ops rockchip_of_thermal_ops = { .get_temp = rockchip_thermal_get_temp, + .set_trips = rockchip_thermal_set_trips, }; static int rockchip_configure_from_dt(struct device *dev, diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index f3ce94ec73b5..ad1186dd6132 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -225,7 +225,7 @@ static void exynos_report_trigger(struct exynos_tmu_data *p) return; } - thermal_zone_device_update(tz); + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); mutex_lock(&tz->lock); /* Find the level for which trip happened */ diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c index fc0c9e198710..91d42319de27 100644 --- a/drivers/thermal/st/st_thermal_memmap.c +++ b/drivers/thermal/st/st_thermal_memmap.c @@ -42,7 +42,8 @@ static irqreturn_t st_mmap_thermal_trip_handler(int irq, void *sdata) { struct st_thermal_sensor *sensor = sdata; - thermal_zone_device_update(sensor->thermal_dev); + thermal_zone_device_update(sensor->thermal_dev, + THERMAL_EVENT_UNSPECIFIED); return IRQ_HANDLED; } diff --git a/drivers/thermal/tango_thermal.c b/drivers/thermal/tango_thermal.c index 70e0d9f406e9..201304aeafeb 100644 --- a/drivers/thermal/tango_thermal.c +++ b/drivers/thermal/tango_thermal.c @@ -64,6 +64,12 @@ static const struct thermal_zone_of_device_ops ops = { .get_temp = tango_get_temp, }; +static void tango_thermal_init(struct tango_thermal_priv *priv) +{ + writel(0, priv->base + TEMPSI_CFG); + writel(CMD_ON, priv->base + TEMPSI_CMD); +} + static int tango_thermal_probe(struct platform_device *pdev) { struct resource *res; @@ -79,14 +85,22 @@ static int tango_thermal_probe(struct platform_device *pdev) if (IS_ERR(priv->base)) return PTR_ERR(priv->base); + platform_set_drvdata(pdev, priv); priv->thresh_idx = IDX_MIN; - writel(0, priv->base + TEMPSI_CFG); - writel(CMD_ON, priv->base + TEMPSI_CMD); + tango_thermal_init(priv); tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &ops); return PTR_ERR_OR_ZERO(tzdev); } +static int __maybe_unused tango_thermal_resume(struct device *dev) +{ + tango_thermal_init(dev_get_drvdata(dev)); + return 0; +} + +static SIMPLE_DEV_PM_OPS(tango_thermal_pm, NULL, tango_thermal_resume); + static const struct of_device_id tango_sensor_ids[] = { { .compatible = "sigma,smp8758-thermal", @@ -99,6 +113,7 @@ static struct platform_driver tango_thermal_driver = { .driver = { .name = "tango-thermal", .of_match_table = tango_sensor_ids, + .pm = &tango_thermal_pm, }, }; diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c index b8651726201e..7d2db23d71a3 100644 --- a/drivers/thermal/tegra/soctherm.c +++ b/drivers/thermal/tegra/soctherm.c @@ -30,6 +30,7 @@ #include <dt-bindings/thermal/tegra124-soctherm.h> +#include "../thermal_core.h" #include "soctherm.h" #define SENSOR_CONFIG0 0 @@ -67,35 +68,228 @@ #define READBACK_ADD_HALF BIT(7) #define READBACK_NEGATE BIT(0) +/* + * THERMCTL_LEVEL0_GROUP_CPU is defined in soctherm.h + * because it will be used by tegraxxx_soctherm.c + */ +#define THERMCTL_LVL0_CPU0_EN_MASK BIT(8) +#define THERMCTL_LVL0_CPU0_CPU_THROT_MASK (0x3 << 5) +#define THERMCTL_LVL0_CPU0_CPU_THROT_LIGHT 0x1 +#define THERMCTL_LVL0_CPU0_CPU_THROT_HEAVY 0x2 +#define THERMCTL_LVL0_CPU0_GPU_THROT_MASK (0x3 << 3) +#define THERMCTL_LVL0_CPU0_GPU_THROT_LIGHT 0x1 +#define THERMCTL_LVL0_CPU0_GPU_THROT_HEAVY 0x2 +#define THERMCTL_LVL0_CPU0_MEM_THROT_MASK BIT(2) +#define THERMCTL_LVL0_CPU0_STATUS_MASK 0x3 + +#define THERMCTL_LVL0_UP_STATS 0x10 +#define THERMCTL_LVL0_DN_STATS 0x14 + +#define THERMCTL_STATS_CTL 0x94 +#define STATS_CTL_CLR_DN 0x8 +#define STATS_CTL_EN_DN 0x4 +#define STATS_CTL_CLR_UP 0x2 +#define STATS_CTL_EN_UP 0x1 + +#define THROT_GLOBAL_CFG 0x400 +#define THROT_GLOBAL_ENB_MASK BIT(0) + +#define CPU_PSKIP_STATUS 0x418 +#define XPU_PSKIP_STATUS_M_MASK (0xff << 12) +#define XPU_PSKIP_STATUS_N_MASK (0xff << 4) +#define XPU_PSKIP_STATUS_SW_OVERRIDE_MASK BIT(1) +#define XPU_PSKIP_STATUS_ENABLED_MASK BIT(0) + +#define THROT_PRIORITY_LOCK 0x424 +#define THROT_PRIORITY_LOCK_PRIORITY_MASK 0xff + +#define THROT_STATUS 0x428 +#define THROT_STATUS_BREACH_MASK BIT(12) +#define THROT_STATUS_STATE_MASK (0xff << 4) +#define THROT_STATUS_ENABLED_MASK BIT(0) + +#define THROT_PSKIP_CTRL_LITE_CPU 0x430 +#define THROT_PSKIP_CTRL_ENABLE_MASK BIT(31) +#define THROT_PSKIP_CTRL_DIVIDEND_MASK (0xff << 8) +#define THROT_PSKIP_CTRL_DIVISOR_MASK 0xff +#define THROT_PSKIP_CTRL_VECT_GPU_MASK (0x7 << 16) +#define THROT_PSKIP_CTRL_VECT_CPU_MASK (0x7 << 8) +#define THROT_PSKIP_CTRL_VECT2_CPU_MASK 0x7 + +#define THROT_VECT_NONE 0x0 /* 3'b000 */ +#define THROT_VECT_LOW 0x1 /* 3'b001 */ +#define THROT_VECT_MED 0x3 /* 3'b011 */ +#define THROT_VECT_HIGH 0x7 /* 3'b111 */ + +#define THROT_PSKIP_RAMP_LITE_CPU 0x434 +#define THROT_PSKIP_RAMP_SEQ_BYPASS_MODE_MASK BIT(31) +#define THROT_PSKIP_RAMP_DURATION_MASK (0xffff << 8) +#define THROT_PSKIP_RAMP_STEP_MASK 0xff + +#define THROT_PRIORITY_LITE 0x444 +#define THROT_PRIORITY_LITE_PRIO_MASK 0xff + +#define THROT_DELAY_LITE 0x448 +#define THROT_DELAY_LITE_DELAY_MASK 0xff + +/* car register offsets needed for enabling HW throttling */ +#define CAR_SUPER_CCLKG_DIVIDER 0x36c +#define CDIVG_USE_THERM_CONTROLS_MASK BIT(30) + +/* ccroc register offsets needed for enabling HW throttling for Tegra132 */ +#define CCROC_SUPER_CCLKG_DIVIDER 0x024 + +#define CCROC_GLOBAL_CFG 0x148 + +#define CCROC_THROT_PSKIP_RAMP_CPU 0x150 +#define CCROC_THROT_PSKIP_RAMP_SEQ_BYPASS_MODE_MASK BIT(31) +#define CCROC_THROT_PSKIP_RAMP_DURATION_MASK (0xffff << 8) +#define CCROC_THROT_PSKIP_RAMP_STEP_MASK 0xff + +#define CCROC_THROT_PSKIP_CTRL_CPU 0x154 +#define CCROC_THROT_PSKIP_CTRL_ENB_MASK BIT(31) +#define CCROC_THROT_PSKIP_CTRL_DIVIDEND_MASK (0xff << 8) +#define CCROC_THROT_PSKIP_CTRL_DIVISOR_MASK 0xff + /* get val from register(r) mask bits(m) */ #define REG_GET_MASK(r, m) (((r) & (m)) >> (ffs(m) - 1)) /* set val(v) to mask bits(m) of register(r) */ #define REG_SET_MASK(r, m, v) (((r) & ~(m)) | \ (((v) & (m >> (ffs(m) - 1))) << (ffs(m) - 1))) +/* get dividend from the depth */ +#define THROT_DEPTH_DIVIDEND(depth) ((256 * (100 - (depth)) / 100) - 1) + +/* get THROT_PSKIP_xxx offset per LIGHT/HEAVY throt and CPU/GPU dev */ +#define THROT_OFFSET 0x30 +#define THROT_PSKIP_CTRL(throt, dev) (THROT_PSKIP_CTRL_LITE_CPU + \ + (THROT_OFFSET * throt) + (8 * dev)) +#define THROT_PSKIP_RAMP(throt, dev) (THROT_PSKIP_RAMP_LITE_CPU + \ + (THROT_OFFSET * throt) + (8 * dev)) + +/* get THROT_xxx_CTRL offset per LIGHT/HEAVY throt */ +#define THROT_PRIORITY_CTRL(throt) (THROT_PRIORITY_LITE + \ + (THROT_OFFSET * throt)) +#define THROT_DELAY_CTRL(throt) (THROT_DELAY_LITE + \ + (THROT_OFFSET * throt)) + +/* get CCROC_THROT_PSKIP_xxx offset per HIGH/MED/LOW vect*/ +#define CCROC_THROT_OFFSET 0x0c +#define CCROC_THROT_PSKIP_CTRL_CPU_REG(vect) (CCROC_THROT_PSKIP_CTRL_CPU + \ + (CCROC_THROT_OFFSET * vect)) +#define CCROC_THROT_PSKIP_RAMP_CPU_REG(vect) (CCROC_THROT_PSKIP_RAMP_CPU + \ + (CCROC_THROT_OFFSET * vect)) + +/* get THERMCTL_LEVELx offset per CPU/GPU/MEM/TSENSE rg and LEVEL0~3 lv */ +#define THERMCTL_LVL_REGS_SIZE 0x20 +#define THERMCTL_LVL_REG(rg, lv) ((rg) + ((lv) * THERMCTL_LVL_REGS_SIZE)) + static const int min_low_temp = -127000; static const int max_high_temp = 127000; +enum soctherm_throttle_id { + THROTTLE_LIGHT = 0, + THROTTLE_HEAVY, + THROTTLE_SIZE, +}; + +enum soctherm_throttle_dev_id { + THROTTLE_DEV_CPU = 0, + THROTTLE_DEV_GPU, + THROTTLE_DEV_SIZE, +}; + +static const char *const throt_names[] = { + [THROTTLE_LIGHT] = "light", + [THROTTLE_HEAVY] = "heavy", +}; + +struct tegra_soctherm; struct tegra_thermctl_zone { void __iomem *reg; struct device *dev; + struct tegra_soctherm *ts; struct thermal_zone_device *tz; const struct tegra_tsensor_group *sg; }; +struct soctherm_throt_cfg { + const char *name; + unsigned int id; + u8 priority; + u8 cpu_throt_level; + u32 cpu_throt_depth; + struct thermal_cooling_device *cdev; + bool init; +}; + struct tegra_soctherm { struct reset_control *reset; struct clk *clock_tsensor; struct clk *clock_soctherm; void __iomem *regs; - struct thermal_zone_device **thermctl_tzs; + void __iomem *clk_regs; + void __iomem *ccroc_regs; u32 *calib; + struct thermal_zone_device **thermctl_tzs; struct tegra_soctherm_soc *soc; + struct soctherm_throt_cfg throt_cfgs[THROTTLE_SIZE]; + struct dentry *debugfs_dir; }; +/** + * clk_writel() - writes a value to a CAR register + * @ts: pointer to a struct tegra_soctherm + * @v: the value to write + * @reg: the register offset + * + * Writes @v to @reg. No return value. + */ +static inline void clk_writel(struct tegra_soctherm *ts, u32 value, u32 reg) +{ + writel(value, (ts->clk_regs + reg)); +} + +/** + * clk_readl() - reads specified register from CAR IP block + * @ts: pointer to a struct tegra_soctherm + * @reg: register address to be read + * + * Return: the value of the register + */ +static inline u32 clk_readl(struct tegra_soctherm *ts, u32 reg) +{ + return readl(ts->clk_regs + reg); +} + +/** + * ccroc_writel() - writes a value to a CCROC register + * @ts: pointer to a struct tegra_soctherm + * @v: the value to write + * @reg: the register offset + * + * Writes @v to @reg. No return value. + */ +static inline void ccroc_writel(struct tegra_soctherm *ts, u32 value, u32 reg) +{ + writel(value, (ts->ccroc_regs + reg)); +} + +/** + * ccroc_readl() - reads specified register from CCROC IP block + * @ts: pointer to a struct tegra_soctherm + * @reg: register address to be read + * + * Return: the value of the register + */ +static inline u32 ccroc_readl(struct tegra_soctherm *ts, u32 reg) +{ + return readl(ts->ccroc_regs + reg); +} + static void enable_tsensor(struct tegra_soctherm *tegra, unsigned int i) { const struct tegra_tsensor *sensor = &tegra->soc->tsensors[i]; @@ -150,11 +344,17 @@ static int tegra_thermctl_get_temp(void *data, int *out_temp) static int thermtrip_program(struct device *dev, const struct tegra_tsensor_group *sg, int trip_temp); +static int +throttrip_program(struct device *dev, const struct tegra_tsensor_group *sg, + struct soctherm_throt_cfg *stc, int trip_temp); +static struct soctherm_throt_cfg * +find_throttle_cfg_by_name(struct tegra_soctherm *ts, const char *name); static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp) { struct tegra_thermctl_zone *zone = data; struct thermal_zone_device *tz = zone->tz; + struct tegra_soctherm *ts = zone->ts; const struct tegra_tsensor_group *sg = zone->sg; struct device *dev = zone->dev; enum thermal_trip_type type; @@ -167,10 +367,29 @@ static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp) if (ret) return ret; - if (type != THERMAL_TRIP_CRITICAL) - return 0; + if (type == THERMAL_TRIP_CRITICAL) { + return thermtrip_program(dev, sg, temp); + } else if (type == THERMAL_TRIP_HOT) { + int i; + + for (i = 0; i < THROTTLE_SIZE; i++) { + struct thermal_cooling_device *cdev; + struct soctherm_throt_cfg *stc; + + if (!ts->throt_cfgs[i].init) + continue; + + cdev = ts->throt_cfgs[i].cdev; + if (get_thermal_instance(tz, cdev, trip)) + stc = find_throttle_cfg_by_name(ts, cdev->type); + else + continue; + + return throttrip_program(dev, sg, stc, temp); + } + } - return thermtrip_program(dev, sg, temp); + return 0; } static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = { @@ -238,14 +457,110 @@ static int thermtrip_program(struct device *dev, } /** + * throttrip_program() - Configures the hardware to throttle the + * pulse if a given sensor group reaches a given temperature + * @dev: ptr to the struct device for the SOC_THERM IP block + * @sg: pointer to the sensor group to set the thermtrip temperature for + * @stc: pointer to the throttle need to be triggered + * @trip_temp: the temperature in millicelsius to trigger the thermal trip at + * + * Sets the thermal trip threshold and throttle event of the given sensor + * group. If this threshold is crossed, the hardware will trigger the + * throttle. + * + * Note that, although @trip_temp is specified in millicelsius, the + * hardware is programmed in degrees Celsius. + * + * Return: 0 upon success, or %-EINVAL upon failure. + */ +static int throttrip_program(struct device *dev, + const struct tegra_tsensor_group *sg, + struct soctherm_throt_cfg *stc, + int trip_temp) +{ + struct tegra_soctherm *ts = dev_get_drvdata(dev); + int temp, cpu_throt, gpu_throt; + unsigned int throt; + u32 r, reg_off; + + if (!dev || !sg || !stc || !stc->init) + return -EINVAL; + + temp = enforce_temp_range(dev, trip_temp) / ts->soc->thresh_grain; + + /* Hardcode LIGHT on LEVEL1 and HEAVY on LEVEL2 */ + throt = stc->id; + reg_off = THERMCTL_LVL_REG(sg->thermctl_lvl0_offset, throt + 1); + + if (throt == THROTTLE_LIGHT) { + cpu_throt = THERMCTL_LVL0_CPU0_CPU_THROT_LIGHT; + gpu_throt = THERMCTL_LVL0_CPU0_GPU_THROT_LIGHT; + } else { + cpu_throt = THERMCTL_LVL0_CPU0_CPU_THROT_HEAVY; + gpu_throt = THERMCTL_LVL0_CPU0_GPU_THROT_HEAVY; + if (throt != THROTTLE_HEAVY) + dev_warn(dev, + "invalid throt id %d - assuming HEAVY", + throt); + } + + r = readl(ts->regs + reg_off); + r = REG_SET_MASK(r, sg->thermctl_lvl0_up_thresh_mask, temp); + r = REG_SET_MASK(r, sg->thermctl_lvl0_dn_thresh_mask, temp); + r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_CPU_THROT_MASK, cpu_throt); + r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_GPU_THROT_MASK, gpu_throt); + r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_EN_MASK, 1); + writel(r, ts->regs + reg_off); + + return 0; +} + +static struct soctherm_throt_cfg * +find_throttle_cfg_by_name(struct tegra_soctherm *ts, const char *name) +{ + unsigned int i; + + for (i = 0; ts->throt_cfgs[i].name; i++) + if (!strcmp(ts->throt_cfgs[i].name, name)) + return &ts->throt_cfgs[i]; + + return NULL; +} + +static int get_hot_temp(struct thermal_zone_device *tz, int *trip, int *temp) +{ + int ntrips, i, ret; + enum thermal_trip_type type; + + ntrips = of_thermal_get_ntrips(tz); + if (ntrips <= 0) + return -EINVAL; + + for (i = 0; i < ntrips; i++) { + ret = tz->ops->get_trip_type(tz, i, &type); + if (ret) + return -EINVAL; + if (type == THERMAL_TRIP_HOT) { + ret = tz->ops->get_trip_temp(tz, i, temp); + if (!ret) + *trip = i; + + return ret; + } + } + + return -EINVAL; +} + +/** * tegra_soctherm_set_hwtrips() - set HW trip point from DT data * @dev: struct device * of the SOC_THERM instance * * Configure the SOC_THERM HW trip points, setting "THERMTRIP" - * trip points , using "critical" type trip_temp from thermal - * zone. - * After they have been configured, THERMTRIP will take action - * when the configured SoC thermal sensor group reaches a + * "THROTTLE" trip points , using "critical" or "hot" type trip_temp + * from thermal zone. + * After they have been configured, THERMTRIP or THROTTLE will take + * action when the configured SoC thermal sensor group reaches a * certain temperature. * * Return: 0 upon success, or a negative error code on failure. @@ -254,19 +569,24 @@ static int thermtrip_program(struct device *dev, * THERMTRIP has been enabled successfully when a message similar to * this one appears on the serial console: * "thermtrip: will shut down when sensor group XXX reaches YYYYYY mC" + * THROTTLE has been enabled successfully when a message similar to + * this one appears on the serial console: + * ""throttrip: will throttle when sensor group XXX reaches YYYYYY mC" */ static int tegra_soctherm_set_hwtrips(struct device *dev, const struct tegra_tsensor_group *sg, struct thermal_zone_device *tz) { - int temperature; + struct tegra_soctherm *ts = dev_get_drvdata(dev); + struct soctherm_throt_cfg *stc; + int i, trip, temperature; int ret; ret = tz->ops->get_crit_temp(tz, &temperature); if (ret) { dev_warn(dev, "thermtrip: %s: missing critical temperature\n", sg->name); - return ret; + goto set_throttle; } ret = thermtrip_program(dev, sg, temperature); @@ -280,6 +600,43 @@ static int tegra_soctherm_set_hwtrips(struct device *dev, "thermtrip: will shut down when %s reaches %d mC\n", sg->name, temperature); +set_throttle: + ret = get_hot_temp(tz, &trip, &temperature); + if (ret) { + dev_warn(dev, "throttrip: %s: missing hot temperature\n", + sg->name); + return 0; + } + + for (i = 0; i < THROTTLE_SIZE; i++) { + struct thermal_cooling_device *cdev; + + if (!ts->throt_cfgs[i].init) + continue; + + cdev = ts->throt_cfgs[i].cdev; + if (get_thermal_instance(tz, cdev, trip)) + stc = find_throttle_cfg_by_name(ts, cdev->type); + else + continue; + + ret = throttrip_program(dev, sg, stc, temperature); + if (ret) { + dev_err(dev, "throttrip: %s: error during enable\n", + sg->name); + return ret; + } + + dev_info(dev, + "throttrip: will throttle when %s reaches %d mC\n", + sg->name, temperature); + break; + } + + if (i == THROTTLE_SIZE) + dev_warn(dev, "throttrip: %s: missing throttle cdev\n", + sg->name); + return 0; } @@ -291,7 +648,7 @@ static int regs_show(struct seq_file *s, void *data) const struct tegra_tsensor *tsensors = ts->soc->tsensors; const struct tegra_tsensor_group **ttgs = ts->soc->ttgs; u32 r, state; - int i; + int i, level; seq_puts(s, "-----TSENSE (convert HW)-----\n"); @@ -365,6 +722,81 @@ static int regs_show(struct seq_file *s, void *data) state = REG_GET_MASK(r, SENSOR_TEMP2_MEM_TEMP_MASK); seq_printf(s, " MEM(%d)\n", translate_temp(state)); + for (i = 0; i < ts->soc->num_ttgs; i++) { + seq_printf(s, "%s:\n", ttgs[i]->name); + for (level = 0; level < 4; level++) { + s32 v; + u32 mask; + u16 off = ttgs[i]->thermctl_lvl0_offset; + + r = readl(ts->regs + THERMCTL_LVL_REG(off, level)); + + mask = ttgs[i]->thermctl_lvl0_up_thresh_mask; + state = REG_GET_MASK(r, mask); + v = sign_extend32(state, ts->soc->bptt - 1); + v *= ts->soc->thresh_grain; + seq_printf(s, " %d: Up/Dn(%d /", level, v); + + mask = ttgs[i]->thermctl_lvl0_dn_thresh_mask; + state = REG_GET_MASK(r, mask); + v = sign_extend32(state, ts->soc->bptt - 1); + v *= ts->soc->thresh_grain; + seq_printf(s, "%d ) ", v); + + mask = THERMCTL_LVL0_CPU0_EN_MASK; + state = REG_GET_MASK(r, mask); + seq_printf(s, "En(%d) ", state); + + mask = THERMCTL_LVL0_CPU0_CPU_THROT_MASK; + state = REG_GET_MASK(r, mask); + seq_puts(s, "CPU Throt"); + if (!state) + seq_printf(s, "(%s) ", "none"); + else if (state == THERMCTL_LVL0_CPU0_CPU_THROT_LIGHT) + seq_printf(s, "(%s) ", "L"); + else if (state == THERMCTL_LVL0_CPU0_CPU_THROT_HEAVY) + seq_printf(s, "(%s) ", "H"); + else + seq_printf(s, "(%s) ", "H+L"); + + mask = THERMCTL_LVL0_CPU0_GPU_THROT_MASK; + state = REG_GET_MASK(r, mask); + seq_puts(s, "GPU Throt"); + if (!state) + seq_printf(s, "(%s) ", "none"); + else if (state == THERMCTL_LVL0_CPU0_GPU_THROT_LIGHT) + seq_printf(s, "(%s) ", "L"); + else if (state == THERMCTL_LVL0_CPU0_GPU_THROT_HEAVY) + seq_printf(s, "(%s) ", "H"); + else + seq_printf(s, "(%s) ", "H+L"); + + mask = THERMCTL_LVL0_CPU0_STATUS_MASK; + state = REG_GET_MASK(r, mask); + seq_printf(s, "Status(%s)\n", + state == 0 ? "LO" : + state == 1 ? "In" : + state == 2 ? "Res" : "HI"); + } + } + + r = readl(ts->regs + THERMCTL_STATS_CTL); + seq_printf(s, "STATS: Up(%s) Dn(%s)\n", + r & STATS_CTL_EN_UP ? "En" : "--", + r & STATS_CTL_EN_DN ? "En" : "--"); + + for (level = 0; level < 4; level++) { + u16 off; + + off = THERMCTL_LVL0_UP_STATS; + r = readl(ts->regs + THERMCTL_LVL_REG(off, level)); + seq_printf(s, " Level_%d Up(%d) ", level, r); + + off = THERMCTL_LVL0_DN_STATS; + r = readl(ts->regs + THERMCTL_LVL_REG(off, level)); + seq_printf(s, "Dn(%d)\n", r); + } + r = readl(ts->regs + THERMCTL_THERMTRIP_CTL); state = REG_GET_MASK(r, ttgs[0]->thermtrip_any_en_mask); seq_printf(s, "Thermtrip Any En(%d)\n", state); @@ -376,6 +808,32 @@ static int regs_show(struct seq_file *s, void *data) seq_printf(s, "Thresh(%d)\n", state); } + r = readl(ts->regs + THROT_GLOBAL_CFG); + seq_puts(s, "\n"); + seq_printf(s, "GLOBAL THROTTLE CONFIG: 0x%08x\n", r); + + seq_puts(s, "---------------------------------------------------\n"); + r = readl(ts->regs + THROT_STATUS); + state = REG_GET_MASK(r, THROT_STATUS_BREACH_MASK); + seq_printf(s, "THROT STATUS: breach(%d) ", state); + state = REG_GET_MASK(r, THROT_STATUS_STATE_MASK); + seq_printf(s, "state(%d) ", state); + state = REG_GET_MASK(r, THROT_STATUS_ENABLED_MASK); + seq_printf(s, "enabled(%d)\n", state); + + r = readl(ts->regs + CPU_PSKIP_STATUS); + if (ts->soc->use_ccroc) { + state = REG_GET_MASK(r, XPU_PSKIP_STATUS_ENABLED_MASK); + seq_printf(s, "CPU PSKIP STATUS: enabled(%d)\n", state); + } else { + state = REG_GET_MASK(r, XPU_PSKIP_STATUS_M_MASK); + seq_printf(s, "CPU PSKIP STATUS: M(%d) ", state); + state = REG_GET_MASK(r, XPU_PSKIP_STATUS_N_MASK); + seq_printf(s, "N(%d) ", state); + state = REG_GET_MASK(r, XPU_PSKIP_STATUS_ENABLED_MASK); + seq_printf(s, "enabled(%d)\n", state); + } + return 0; } @@ -449,6 +907,326 @@ static int soctherm_clk_enable(struct platform_device *pdev, bool enable) return 0; } +static int throt_get_cdev_max_state(struct thermal_cooling_device *cdev, + unsigned long *max_state) +{ + *max_state = 1; + return 0; +} + +static int throt_get_cdev_cur_state(struct thermal_cooling_device *cdev, + unsigned long *cur_state) +{ + struct tegra_soctherm *ts = cdev->devdata; + u32 r; + + r = readl(ts->regs + THROT_STATUS); + if (REG_GET_MASK(r, THROT_STATUS_STATE_MASK)) + *cur_state = 1; + else + *cur_state = 0; + + return 0; +} + +static int throt_set_cdev_state(struct thermal_cooling_device *cdev, + unsigned long cur_state) +{ + return 0; +} + +static struct thermal_cooling_device_ops throt_cooling_ops = { + .get_max_state = throt_get_cdev_max_state, + .get_cur_state = throt_get_cdev_cur_state, + .set_cur_state = throt_set_cdev_state, +}; + +/** + * soctherm_init_hw_throt_cdev() - Parse the HW throttle configurations + * and register them as cooling devices. + */ +static void soctherm_init_hw_throt_cdev(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct tegra_soctherm *ts = dev_get_drvdata(dev); + struct device_node *np_stc, *np_stcc; + const char *name; + u32 val; + int i, r; + + for (i = 0; i < THROTTLE_SIZE; i++) { + ts->throt_cfgs[i].name = throt_names[i]; + ts->throt_cfgs[i].id = i; + ts->throt_cfgs[i].init = false; + } + + np_stc = of_get_child_by_name(dev->of_node, "throttle-cfgs"); + if (!np_stc) { + dev_info(dev, + "throttle-cfg: no throttle-cfgs - not enabling\n"); + return; + } + + for_each_child_of_node(np_stc, np_stcc) { + struct soctherm_throt_cfg *stc; + struct thermal_cooling_device *tcd; + + name = np_stcc->name; + stc = find_throttle_cfg_by_name(ts, name); + if (!stc) { + dev_err(dev, + "throttle-cfg: could not find %s\n", name); + continue; + } + + r = of_property_read_u32(np_stcc, "nvidia,priority", &val); + if (r) { + dev_info(dev, + "throttle-cfg: %s: missing priority\n", name); + continue; + } + stc->priority = val; + + if (ts->soc->use_ccroc) { + r = of_property_read_u32(np_stcc, + "nvidia,cpu-throt-level", + &val); + if (r) { + dev_info(dev, + "throttle-cfg: %s: missing cpu-throt-level\n", + name); + continue; + } + stc->cpu_throt_level = val; + } else { + r = of_property_read_u32(np_stcc, + "nvidia,cpu-throt-percent", + &val); + if (r) { + dev_info(dev, + "throttle-cfg: %s: missing cpu-throt-percent\n", + name); + continue; + } + stc->cpu_throt_depth = val; + } + + tcd = thermal_of_cooling_device_register(np_stcc, + (char *)name, ts, + &throt_cooling_ops); + of_node_put(np_stcc); + if (IS_ERR_OR_NULL(tcd)) { + dev_err(dev, + "throttle-cfg: %s: failed to register cooling device\n", + name); + continue; + } + + stc->cdev = tcd; + stc->init = true; + } + + of_node_put(np_stc); +} + +/** + * throttlectl_cpu_level_cfg() - programs CCROC NV_THERM level config + * @level: describing the level LOW/MED/HIGH of throttling + * + * It's necessary to set up the CPU-local CCROC NV_THERM instance with + * the M/N values desired for each level. This function does this. + * + * This function pre-programs the CCROC NV_THERM levels in terms of + * pre-configured "Low", "Medium" or "Heavy" throttle levels which are + * mapped to THROT_LEVEL_LOW, THROT_LEVEL_MED and THROT_LEVEL_HVY. + */ +static void throttlectl_cpu_level_cfg(struct tegra_soctherm *ts, int level) +{ + u8 depth, dividend; + u32 r; + + switch (level) { + case TEGRA_SOCTHERM_THROT_LEVEL_LOW: + depth = 50; + break; + case TEGRA_SOCTHERM_THROT_LEVEL_MED: + depth = 75; + break; + case TEGRA_SOCTHERM_THROT_LEVEL_HIGH: + depth = 80; + break; + case TEGRA_SOCTHERM_THROT_LEVEL_NONE: + return; + default: + return; + } + + dividend = THROT_DEPTH_DIVIDEND(depth); + + /* setup PSKIP in ccroc nv_therm registers */ + r = ccroc_readl(ts, CCROC_THROT_PSKIP_RAMP_CPU_REG(level)); + r = REG_SET_MASK(r, CCROC_THROT_PSKIP_RAMP_DURATION_MASK, 0xff); + r = REG_SET_MASK(r, CCROC_THROT_PSKIP_RAMP_STEP_MASK, 0xf); + ccroc_writel(ts, r, CCROC_THROT_PSKIP_RAMP_CPU_REG(level)); + + r = ccroc_readl(ts, CCROC_THROT_PSKIP_CTRL_CPU_REG(level)); + r = REG_SET_MASK(r, CCROC_THROT_PSKIP_CTRL_ENB_MASK, 1); + r = REG_SET_MASK(r, CCROC_THROT_PSKIP_CTRL_DIVIDEND_MASK, dividend); + r = REG_SET_MASK(r, CCROC_THROT_PSKIP_CTRL_DIVISOR_MASK, 0xff); + ccroc_writel(ts, r, CCROC_THROT_PSKIP_CTRL_CPU_REG(level)); +} + +/** + * throttlectl_cpu_level_select() - program CPU pulse skipper config + * @throt: the LIGHT/HEAVY of throttle event id + * + * Pulse skippers are used to throttle clock frequencies. This + * function programs the pulse skippers based on @throt and platform + * data. This function is used on SoCs which have CPU-local pulse + * skipper control, such as T13x. It programs soctherm's interface to + * Denver:CCROC NV_THERM in terms of Low, Medium and HIGH throttling + * vectors. PSKIP_BYPASS mode is set as required per HW spec. + */ +static void throttlectl_cpu_level_select(struct tegra_soctherm *ts, + enum soctherm_throttle_id throt) +{ + u32 r, throt_vect; + + /* Denver:CCROC NV_THERM interface N:3 Mapping */ + switch (ts->throt_cfgs[throt].cpu_throt_level) { + case TEGRA_SOCTHERM_THROT_LEVEL_LOW: + throt_vect = THROT_VECT_LOW; + break; + case TEGRA_SOCTHERM_THROT_LEVEL_MED: + throt_vect = THROT_VECT_MED; + break; + case TEGRA_SOCTHERM_THROT_LEVEL_HIGH: + throt_vect = THROT_VECT_HIGH; + break; + default: + throt_vect = THROT_VECT_NONE; + break; + } + + r = readl(ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU)); + r = REG_SET_MASK(r, THROT_PSKIP_CTRL_ENABLE_MASK, 1); + r = REG_SET_MASK(r, THROT_PSKIP_CTRL_VECT_CPU_MASK, throt_vect); + r = REG_SET_MASK(r, THROT_PSKIP_CTRL_VECT2_CPU_MASK, throt_vect); + writel(r, ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU)); + + /* bypass sequencer in soc_therm as it is programmed in ccroc */ + r = REG_SET_MASK(0, THROT_PSKIP_RAMP_SEQ_BYPASS_MODE_MASK, 1); + writel(r, ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU)); +} + +/** + * throttlectl_cpu_mn() - program CPU pulse skipper configuration + * @throt: the LIGHT/HEAVY of throttle event id + * + * Pulse skippers are used to throttle clock frequencies. This + * function programs the pulse skippers based on @throt and platform + * data. This function is used for CPUs that have "remote" pulse + * skipper control, e.g., the CPU pulse skipper is controlled by the + * SOC_THERM IP block. (SOC_THERM is located outside the CPU + * complex.) + */ +static void throttlectl_cpu_mn(struct tegra_soctherm *ts, + enum soctherm_throttle_id throt) +{ + u32 r; + int depth; + u8 dividend; + + depth = ts->throt_cfgs[throt].cpu_throt_depth; + dividend = THROT_DEPTH_DIVIDEND(depth); + + r = readl(ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU)); + r = REG_SET_MASK(r, THROT_PSKIP_CTRL_ENABLE_MASK, 1); + r = REG_SET_MASK(r, THROT_PSKIP_CTRL_DIVIDEND_MASK, dividend); + r = REG_SET_MASK(r, THROT_PSKIP_CTRL_DIVISOR_MASK, 0xff); + writel(r, ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU)); + + r = readl(ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU)); + r = REG_SET_MASK(r, THROT_PSKIP_RAMP_DURATION_MASK, 0xff); + r = REG_SET_MASK(r, THROT_PSKIP_RAMP_STEP_MASK, 0xf); + writel(r, ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU)); +} + +/** + * soctherm_throttle_program() - programs pulse skippers' configuration + * @throt: the LIGHT/HEAVY of the throttle event id. + * + * Pulse skippers are used to throttle clock frequencies. + * This function programs the pulse skippers. + */ +static void soctherm_throttle_program(struct tegra_soctherm *ts, + enum soctherm_throttle_id throt) +{ + u32 r; + struct soctherm_throt_cfg stc = ts->throt_cfgs[throt]; + + if (!stc.init) + return; + + /* Setup PSKIP parameters */ + if (ts->soc->use_ccroc) + throttlectl_cpu_level_select(ts, throt); + else + throttlectl_cpu_mn(ts, throt); + + r = REG_SET_MASK(0, THROT_PRIORITY_LITE_PRIO_MASK, stc.priority); + writel(r, ts->regs + THROT_PRIORITY_CTRL(throt)); + + r = REG_SET_MASK(0, THROT_DELAY_LITE_DELAY_MASK, 0); + writel(r, ts->regs + THROT_DELAY_CTRL(throt)); + + r = readl(ts->regs + THROT_PRIORITY_LOCK); + r = REG_GET_MASK(r, THROT_PRIORITY_LOCK_PRIORITY_MASK); + if (r >= stc.priority) + return; + r = REG_SET_MASK(0, THROT_PRIORITY_LOCK_PRIORITY_MASK, + stc.priority); + writel(r, ts->regs + THROT_PRIORITY_LOCK); +} + +static void tegra_soctherm_throttle(struct device *dev) +{ + struct tegra_soctherm *ts = dev_get_drvdata(dev); + u32 v; + int i; + + /* configure LOW, MED and HIGH levels for CCROC NV_THERM */ + if (ts->soc->use_ccroc) { + throttlectl_cpu_level_cfg(ts, TEGRA_SOCTHERM_THROT_LEVEL_LOW); + throttlectl_cpu_level_cfg(ts, TEGRA_SOCTHERM_THROT_LEVEL_MED); + throttlectl_cpu_level_cfg(ts, TEGRA_SOCTHERM_THROT_LEVEL_HIGH); + } + + /* Thermal HW throttle programming */ + for (i = 0; i < THROTTLE_SIZE; i++) + soctherm_throttle_program(ts, i); + + v = REG_SET_MASK(0, THROT_GLOBAL_ENB_MASK, 1); + if (ts->soc->use_ccroc) { + ccroc_writel(ts, v, CCROC_GLOBAL_CFG); + + v = ccroc_readl(ts, CCROC_SUPER_CCLKG_DIVIDER); + v = REG_SET_MASK(v, CDIVG_USE_THERM_CONTROLS_MASK, 1); + ccroc_writel(ts, v, CCROC_SUPER_CCLKG_DIVIDER); + } else { + writel(v, ts->regs + THROT_GLOBAL_CFG); + + v = clk_readl(ts, CAR_SUPER_CCLKG_DIVIDER); + v = REG_SET_MASK(v, CDIVG_USE_THERM_CONTROLS_MASK, 1); + clk_writel(ts, v, CAR_SUPER_CCLKG_DIVIDER); + } + + /* initialize stats collection */ + v = STATS_CTL_CLR_DN | STATS_CTL_EN_DN | + STATS_CTL_CLR_UP | STATS_CTL_EN_UP; + writel(v, ts->regs + THERMCTL_STATS_CTL); +} + static void soctherm_init(struct platform_device *pdev) { struct tegra_soctherm *tegra = platform_get_drvdata(pdev); @@ -475,6 +1253,9 @@ static void soctherm_init(struct platform_device *pdev) } writel(pdiv, tegra->regs + SENSOR_PDIV); writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF); + + /* Configure hw throttle */ + tegra_soctherm_throttle(&pdev->dev); } static const struct of_device_id tegra_soctherm_of_match[] = { @@ -527,10 +1308,31 @@ static int tegra_soctherm_probe(struct platform_device *pdev) tegra->soc = soc; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "soctherm-reg"); tegra->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(tegra->regs)) + if (IS_ERR(tegra->regs)) { + dev_err(&pdev->dev, "can't get soctherm registers"); return PTR_ERR(tegra->regs); + } + + if (!tegra->soc->use_ccroc) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "car-reg"); + tegra->clk_regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(tegra->clk_regs)) { + dev_err(&pdev->dev, "can't get car clk registers"); + return PTR_ERR(tegra->clk_regs); + } + } else { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "ccroc-reg"); + tegra->ccroc_regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(tegra->ccroc_regs)) { + dev_err(&pdev->dev, "can't get ccroc registers"); + return PTR_ERR(tegra->ccroc_regs); + } + } tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm"); if (IS_ERR(tegra->reset)) { @@ -580,6 +1382,8 @@ static int tegra_soctherm_probe(struct platform_device *pdev) if (err) return err; + soctherm_init_hw_throt_cdev(pdev); + soctherm_init(pdev); for (i = 0; i < soc->num_ttgs; ++i) { @@ -593,6 +1397,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev) zone->reg = tegra->regs + soc->ttgs[i]->sensor_temp_offset; zone->dev = &pdev->dev; zone->sg = soc->ttgs[i]; + zone->ts = tegra; z = devm_thermal_zone_of_sensor_register(&pdev->dev, soc->ttgs[i]->id, zone, @@ -608,7 +1413,9 @@ static int tegra_soctherm_probe(struct platform_device *pdev) tegra->thermctl_tzs[soc->ttgs[i]->id] = z; /* Configure hw trip points */ - tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z); + err = tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z); + if (err) + goto disable_clocks; } soctherm_debug_init(pdev); @@ -661,7 +1468,12 @@ static int __maybe_unused soctherm_resume(struct device *dev) struct thermal_zone_device *tz; tz = tegra->thermctl_tzs[soc->ttgs[i]->id]; - tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz); + err = tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz); + if (err) { + dev_err(&pdev->dev, + "Resume failed: set hwtrips failed\n"); + return err; + } } return 0; diff --git a/drivers/thermal/tegra/soctherm.h b/drivers/thermal/tegra/soctherm.h index 28e18ec4b4c3..e96ca73fd780 100644 --- a/drivers/thermal/tegra/soctherm.h +++ b/drivers/thermal/tegra/soctherm.h @@ -15,6 +15,11 @@ #ifndef __DRIVERS_THERMAL_TEGRA_SOCTHERM_H #define __DRIVERS_THERMAL_TEGRA_SOCTHERM_H +#define THERMCTL_LEVEL0_GROUP_CPU 0x0 +#define THERMCTL_LEVEL0_GROUP_GPU 0x4 +#define THERMCTL_LEVEL0_GROUP_MEM 0x8 +#define THERMCTL_LEVEL0_GROUP_TSENSE 0xc + #define SENSOR_CONFIG2 8 #define SENSOR_CONFIG2_THERMA_MASK (0xffff << 16) #define SENSOR_CONFIG2_THERMA_SHIFT 16 @@ -65,6 +70,9 @@ struct tegra_tsensor_group { u32 thermtrip_enable_mask; u32 thermtrip_any_en_mask; u32 thermtrip_threshold_mask; + u16 thermctl_lvl0_offset; + u32 thermctl_lvl0_up_thresh_mask; + u32 thermctl_lvl0_dn_thresh_mask; }; struct tegra_tsensor_configuration { @@ -103,6 +111,8 @@ struct tegra_soctherm_soc { const unsigned int num_ttgs; const struct tegra_soctherm_fuse *tfuse; const int thresh_grain; + const unsigned int bptt; + const bool use_ccroc; }; int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse, diff --git a/drivers/thermal/tegra/tegra124-soctherm.c b/drivers/thermal/tegra/tegra124-soctherm.c index beb9d36b9c8a..36768630f78c 100644 --- a/drivers/thermal/tegra/tegra124-soctherm.c +++ b/drivers/thermal/tegra/tegra124-soctherm.c @@ -28,7 +28,11 @@ #define TEGRA124_THERMTRIP_CPU_THRESH_MASK (0xff << 8) #define TEGRA124_THERMTRIP_TSENSE_THRESH_MASK 0xff +#define TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK (0xff << 17) +#define TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK (0xff << 9) + #define TEGRA124_THRESH_GRAIN 1000 +#define TEGRA124_BPTT 8 static const struct tegra_tsensor_configuration tegra124_tsensor_config = { .tall = 16300, @@ -51,6 +55,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_cpu = { .thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK, .thermtrip_enable_mask = TEGRA124_THERMTRIP_CPU_EN_MASK, .thermtrip_threshold_mask = TEGRA124_THERMTRIP_CPU_THRESH_MASK, + .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU, + .thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK, + .thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK, }; static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = { @@ -66,6 +73,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = { .thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK, .thermtrip_enable_mask = TEGRA124_THERMTRIP_GPU_EN_MASK, .thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK, + .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU, + .thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK, + .thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK, }; static const struct tegra_tsensor_group tegra124_tsensor_group_pll = { @@ -79,6 +89,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_pll = { .thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK, .thermtrip_enable_mask = TEGRA124_THERMTRIP_TSENSE_EN_MASK, .thermtrip_threshold_mask = TEGRA124_THERMTRIP_TSENSE_THRESH_MASK, + .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE, + .thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK, + .thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK, }; static const struct tegra_tsensor_group tegra124_tsensor_group_mem = { @@ -94,6 +107,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_mem = { .thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK, .thermtrip_enable_mask = TEGRA124_THERMTRIP_MEM_EN_MASK, .thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK, + .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM, + .thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK, + .thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK, }; static const struct tegra_tsensor_group *tegra124_tsensor_groups[] = { @@ -193,4 +209,6 @@ const struct tegra_soctherm_soc tegra124_soctherm = { .num_ttgs = ARRAY_SIZE(tegra124_tsensor_groups), .tfuse = &tegra124_soctherm_fuse, .thresh_grain = TEGRA124_THRESH_GRAIN, + .bptt = TEGRA124_BPTT, + .use_ccroc = false, }; diff --git a/drivers/thermal/tegra/tegra132-soctherm.c b/drivers/thermal/tegra/tegra132-soctherm.c index e2aa84e1b307..97fa30501eb1 100644 --- a/drivers/thermal/tegra/tegra132-soctherm.c +++ b/drivers/thermal/tegra/tegra132-soctherm.c @@ -28,7 +28,11 @@ #define TEGRA132_THERMTRIP_CPU_THRESH_MASK (0xff << 8) #define TEGRA132_THERMTRIP_TSENSE_THRESH_MASK 0xff +#define TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK (0xff << 17) +#define TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK (0xff << 9) + #define TEGRA132_THRESH_GRAIN 1000 +#define TEGRA132_BPTT 8 static const struct tegra_tsensor_configuration tegra132_tsensor_config = { .tall = 16300, @@ -51,6 +55,9 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_cpu = { .thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK, .thermtrip_enable_mask = TEGRA132_THERMTRIP_CPU_EN_MASK, .thermtrip_threshold_mask = TEGRA132_THERMTRIP_CPU_THRESH_MASK, + .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU, + .thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK, + .thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK, }; static const struct tegra_tsensor_group tegra132_tsensor_group_gpu = { @@ -66,6 +73,9 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_gpu = { .thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK, .thermtrip_enable_mask = TEGRA132_THERMTRIP_GPU_EN_MASK, .thermtrip_threshold_mask = TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK, + .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU, + .thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK, + .thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK, }; static const struct tegra_tsensor_group tegra132_tsensor_group_pll = { @@ -79,6 +89,9 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_pll = { .thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK, .thermtrip_enable_mask = TEGRA132_THERMTRIP_TSENSE_EN_MASK, .thermtrip_threshold_mask = TEGRA132_THERMTRIP_TSENSE_THRESH_MASK, + .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE, + .thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK, + .thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK, }; static const struct tegra_tsensor_group tegra132_tsensor_group_mem = { @@ -94,6 +107,9 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_mem = { .thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK, .thermtrip_enable_mask = TEGRA132_THERMTRIP_MEM_EN_MASK, .thermtrip_threshold_mask = TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK, + .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM, + .thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK, + .thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK, }; static const struct tegra_tsensor_group *tegra132_tsensor_groups[] = { @@ -193,4 +209,6 @@ const struct tegra_soctherm_soc tegra132_soctherm = { .num_ttgs = ARRAY_SIZE(tegra132_tsensor_groups), .tfuse = &tegra132_soctherm_fuse, .thresh_grain = TEGRA132_THRESH_GRAIN, + .bptt = TEGRA132_BPTT, + .use_ccroc = true, }; diff --git a/drivers/thermal/tegra/tegra210-soctherm.c b/drivers/thermal/tegra/tegra210-soctherm.c index 19cc0ab66f0e..ad53169a8e95 100644 --- a/drivers/thermal/tegra/tegra210-soctherm.c +++ b/drivers/thermal/tegra/tegra210-soctherm.c @@ -29,7 +29,11 @@ #define TEGRA210_THERMTRIP_CPU_THRESH_MASK (0x1ff << 9) #define TEGRA210_THERMTRIP_TSENSE_THRESH_MASK 0x1ff +#define TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK (0x1ff << 18) +#define TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK (0x1ff << 9) + #define TEGRA210_THRESH_GRAIN 500 +#define TEGRA210_BPTT 9 static const struct tegra_tsensor_configuration tegra210_tsensor_config = { .tall = 16300, @@ -52,6 +56,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_cpu = { .thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK, .thermtrip_enable_mask = TEGRA210_THERMTRIP_CPU_EN_MASK, .thermtrip_threshold_mask = TEGRA210_THERMTRIP_CPU_THRESH_MASK, + .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU, + .thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK, + .thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK, }; static const struct tegra_tsensor_group tegra210_tsensor_group_gpu = { @@ -67,6 +74,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_gpu = { .thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK, .thermtrip_enable_mask = TEGRA210_THERMTRIP_GPU_EN_MASK, .thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK, + .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU, + .thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK, + .thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK, }; static const struct tegra_tsensor_group tegra210_tsensor_group_pll = { @@ -80,6 +90,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_pll = { .thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK, .thermtrip_enable_mask = TEGRA210_THERMTRIP_TSENSE_EN_MASK, .thermtrip_threshold_mask = TEGRA210_THERMTRIP_TSENSE_THRESH_MASK, + .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE, + .thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK, + .thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK, }; static const struct tegra_tsensor_group tegra210_tsensor_group_mem = { @@ -95,6 +108,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_mem = { .thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK, .thermtrip_enable_mask = TEGRA210_THERMTRIP_MEM_EN_MASK, .thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK, + .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM, + .thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK, + .thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK, }; static const struct tegra_tsensor_group *tegra210_tsensor_groups[] = { @@ -194,4 +210,6 @@ const struct tegra_soctherm_soc tegra210_soctherm = { .num_ttgs = ARRAY_SIZE(tegra210_tsensor_groups), .tfuse = &tegra210_soctherm_fuse, .thresh_grain = TEGRA210_THRESH_GRAIN, + .bptt = TEGRA210_BPTT, + .use_ccroc = false, }; diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index e2fc6161dded..226b0b4aced6 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -520,6 +520,56 @@ exit: } EXPORT_SYMBOL_GPL(thermal_zone_get_temp); +void thermal_zone_set_trips(struct thermal_zone_device *tz) +{ + int low = -INT_MAX; + int high = INT_MAX; + int trip_temp, hysteresis; + int i, ret; + + mutex_lock(&tz->lock); + + if (!tz->ops->set_trips || !tz->ops->get_trip_hyst) + goto exit; + + for (i = 0; i < tz->trips; i++) { + int trip_low; + + tz->ops->get_trip_temp(tz, i, &trip_temp); + tz->ops->get_trip_hyst(tz, i, &hysteresis); + + trip_low = trip_temp - hysteresis; + + if (trip_low < tz->temperature && trip_low > low) + low = trip_low; + + if (trip_temp > tz->temperature && trip_temp < high) + high = trip_temp; + } + + /* No need to change trip points */ + if (tz->prev_low_trip == low && tz->prev_high_trip == high) + goto exit; + + tz->prev_low_trip = low; + tz->prev_high_trip = high; + + dev_dbg(&tz->device, + "new temperature boundaries: %d < x < %d\n", low, high); + + /* + * Set a temperature window. When this window is left the driver + * must inform the thermal core via thermal_zone_device_update. + */ + ret = tz->ops->set_trips(tz, low, high); + if (ret) + dev_err(&tz->device, "Failed to set trips: %d\n", ret); + +exit: + mutex_unlock(&tz->lock); +} +EXPORT_SYMBOL_GPL(thermal_zone_set_trips); + static void update_temperature(struct thermal_zone_device *tz) { int temp, ret; @@ -557,7 +607,8 @@ static void thermal_zone_device_reset(struct thermal_zone_device *tz) pos->initialized = false; } -void thermal_zone_device_update(struct thermal_zone_device *tz) +void thermal_zone_device_update(struct thermal_zone_device *tz, + enum thermal_notify_event event) { int count; @@ -569,6 +620,10 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) update_temperature(tz); + thermal_zone_set_trips(tz); + + tz->notify_event = event; + for (count = 0; count < tz->trips; count++) handle_thermal_trip(tz, count); } @@ -579,7 +634,7 @@ static void thermal_zone_device_check(struct work_struct *work) struct thermal_zone_device *tz = container_of(work, struct thermal_zone_device, poll_queue.work); - thermal_zone_device_update(tz); + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); } /* sys I/F for thermal zone */ @@ -703,7 +758,7 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr, if (ret) return ret; - thermal_zone_device_update(tz); + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); return count; } @@ -754,6 +809,9 @@ trip_point_hyst_store(struct device *dev, struct device_attribute *attr, */ ret = tz->ops->set_trip_hyst(tz, trip, temperature); + if (!ret) + thermal_zone_set_trips(tz); + return ret ? ret : count; } @@ -822,7 +880,7 @@ passive_store(struct device *dev, struct device_attribute *attr, tz->forced_passive = state; - thermal_zone_device_update(tz); + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); return count; } @@ -913,7 +971,7 @@ emul_temp_store(struct device *dev, struct device_attribute *attr, } if (!ret) - thermal_zone_device_update(tz); + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); return ret ? ret : count; } @@ -1509,7 +1567,8 @@ __thermal_cooling_device_register(struct device_node *np, mutex_lock(&thermal_list_lock); list_for_each_entry(pos, &thermal_tz_list, node) if (atomic_cmpxchg(&pos->need_update, 1, 0)) - thermal_zone_device_update(pos); + thermal_zone_device_update(pos, + THERMAL_EVENT_UNSPECIFIED); mutex_unlock(&thermal_list_lock); return cdev; @@ -1952,7 +2011,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, thermal_zone_device_reset(tz); /* Update the new thermal zone and mark it as already updated. */ if (atomic_cmpxchg(&tz->need_update, 1, 0)) - thermal_zone_device_update(tz); + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); return tz; @@ -2069,6 +2128,36 @@ exit: } EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name); +/** + * thermal_zone_get_slope - return the slope attribute of the thermal zone + * @tz: thermal zone device with the slope attribute + * + * Return: If the thermal zone device has a slope attribute, return it, else + * return 1. + */ +int thermal_zone_get_slope(struct thermal_zone_device *tz) +{ + if (tz && tz->tzp) + return tz->tzp->slope; + return 1; +} +EXPORT_SYMBOL_GPL(thermal_zone_get_slope); + +/** + * thermal_zone_get_offset - return the offset attribute of the thermal zone + * @tz: thermal zone device with the offset attribute + * + * Return: If the thermal zone device has a offset attribute, return it, else + * return 0. + */ +int thermal_zone_get_offset(struct thermal_zone_device *tz) +{ + if (tz && tz->tzp) + return tz->tzp->offset; + return 0; +} +EXPORT_SYMBOL_GPL(thermal_zone_get_offset); + #ifdef CONFIG_NET static const struct genl_multicast_group thermal_event_mcgrps[] = { { .name = THERMAL_GENL_MCAST_GROUP_NAME, }, @@ -2209,7 +2298,8 @@ static int thermal_pm_notify(struct notifier_block *nb, atomic_set(&in_suspend, 0); list_for_each_entry(tz, &thermal_tz_list, node) { thermal_zone_device_reset(tz); - thermal_zone_device_update(tz); + thermal_zone_device_update(tz, + THERMAL_EVENT_UNSPECIFIED); } break; default: diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 15c0a9ac2209..0586bd0f2bab 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -52,7 +52,7 @@ static void ti_thermal_work(struct work_struct *work) struct ti_thermal_data *data = container_of(work, struct ti_thermal_data, thermal_wq); - thermal_zone_device_update(data->ti_thermal); + thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED); dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n", data->ti_thermal->type); @@ -205,7 +205,7 @@ static int ti_thermal_set_mode(struct thermal_zone_device *thermal, data->mode = mode; ti_bandgap_write_update_interval(bgp, data->sensor_id, data->ti_thermal->polling_delay); - thermal_zone_device_update(data->ti_thermal); + thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED); dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n", data->ti_thermal->polling_delay); @@ -239,7 +239,7 @@ static int ti_thermal_get_trip_temp(struct thermal_zone_device *thermal, return 0; } -static int __ti_thermal_get_trend(void *p, long *trend) +static int __ti_thermal_get_trend(void *p, int trip, enum thermal_trend *trend) { struct ti_thermal_data *data = p; struct ti_bandgap *bgp; @@ -252,22 +252,6 @@ static int __ti_thermal_get_trend(void *p, long *trend) if (ret) return ret; - *trend = tr; - - return 0; -} - -/* Get the temperature trend callback functions for thermal zone */ -static int ti_thermal_get_trend(struct thermal_zone_device *thermal, - int trip, enum thermal_trend *trend) -{ - int ret; - long tr; - - ret = __ti_thermal_get_trend(thermal->devdata, &tr); - if (ret) - return ret; - if (tr > 0) *trend = THERMAL_TREND_RAISING; else if (tr < 0) @@ -278,6 +262,13 @@ static int ti_thermal_get_trend(struct thermal_zone_device *thermal, return 0; } +/* Get the temperature trend callback functions for thermal zone */ +static int ti_thermal_get_trend(struct thermal_zone_device *thermal, + int trip, enum thermal_trend *trend) +{ + return __ti_thermal_get_trend(thermal->devdata, trip, trend); +} + /* Get critical temperature callback functions for thermal zone */ static int ti_thermal_get_crit_temp(struct thermal_zone_device *thermal, int *temp) diff --git a/drivers/thermal/user_space.c b/drivers/thermal/user_space.c index 10adcddc8821..c908150c268d 100644 --- a/drivers/thermal/user_space.c +++ b/drivers/thermal/user_space.c @@ -23,19 +23,30 @@ */ #include <linux/thermal.h> - +#include <linux/slab.h> #include "thermal_core.h" /** * notify_user_space - Notifies user space about thermal events * @tz - thermal_zone_device + * @trip - Trip point index * * This function notifies the user space through UEvents. */ static int notify_user_space(struct thermal_zone_device *tz, int trip) { + char *thermal_prop[5]; + int i; + mutex_lock(&tz->lock); - kobject_uevent(&tz->device.kobj, KOBJ_CHANGE); + thermal_prop[0] = kasprintf(GFP_KERNEL, "NAME=%s", tz->type); + thermal_prop[1] = kasprintf(GFP_KERNEL, "TEMP=%d", tz->temperature); + thermal_prop[2] = kasprintf(GFP_KERNEL, "TRIP=%d", trip); + thermal_prop[3] = kasprintf(GFP_KERNEL, "EVENT=%d", tz->notify_event); + thermal_prop[4] = NULL; + kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, thermal_prop); + for (i = 0; i < 4; ++i) + kfree(thermal_prop[i]); mutex_unlock(&tz->lock); return 0; } diff --git a/drivers/thermal/x86_pkg_temp_thermal.c b/drivers/thermal/x86_pkg_temp_thermal.c index 97f0a2bd93ed..95f4c1bcdb4c 100644 --- a/drivers/thermal/x86_pkg_temp_thermal.c +++ b/drivers/thermal/x86_pkg_temp_thermal.c @@ -348,7 +348,8 @@ static void pkg_temp_thermal_threshold_work_fn(struct work_struct *work) } if (notify) { pr_debug("thermal_zone_device_update\n"); - thermal_zone_device_update(phdev->tzone); + thermal_zone_device_update(phdev->tzone, + THERMAL_EVENT_UNSPECIFIED); } } |