diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/Makefile | 1 | ||||
| -rw-r--r-- | drivers/bcma/Kconfig | 33 | ||||
| -rw-r--r-- | drivers/bcma/Makefile | 7 | ||||
| -rw-r--r-- | drivers/bcma/README | 19 | ||||
| -rw-r--r-- | drivers/bcma/TODO | 3 | ||||
| -rw-r--r-- | drivers/bcma/bcma_private.h | 28 | ||||
| -rw-r--r-- | drivers/bcma/core.c | 51 | ||||
| -rw-r--r-- | drivers/bcma/driver_chipcommon.c | 87 | ||||
| -rw-r--r-- | drivers/bcma/driver_chipcommon_pmu.c | 134 | ||||
| -rw-r--r-- | drivers/bcma/driver_pci.c | 163 | ||||
| -rw-r--r-- | drivers/bcma/host_pci.c | 196 | ||||
| -rw-r--r-- | drivers/bcma/main.c | 247 | ||||
| -rw-r--r-- | drivers/bcma/scan.c | 360 | ||||
| -rw-r--r-- | drivers/bcma/scan.h | 56 |
15 files changed, 1387 insertions, 0 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index 177c7d156933..aca706751469 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -68,6 +68,8 @@ source "drivers/watchdog/Kconfig" source "drivers/ssb/Kconfig" +source "drivers/bcma/Kconfig" + source "drivers/mfd/Kconfig" source "drivers/regulator/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 3f135b6fb014..a29527f4ded6 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -110,6 +110,7 @@ obj-$(CONFIG_HID) += hid/ obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_OF) += of/ obj-$(CONFIG_SSB) += ssb/ +obj-$(CONFIG_BCMA) += bcma/ obj-$(CONFIG_VHOST_NET) += vhost/ obj-$(CONFIG_VLYNQ) += vlynq/ obj-$(CONFIG_STAGING) += staging/ diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig new file mode 100644 index 000000000000..353781b5b78b --- /dev/null +++ b/drivers/bcma/Kconfig @@ -0,0 +1,33 @@ +config BCMA_POSSIBLE + bool + depends on HAS_IOMEM && HAS_DMA + default y + +menu "Broadcom specific AMBA" + depends on BCMA_POSSIBLE + +config BCMA + tristate "BCMA support" + depends on BCMA_POSSIBLE + help + Bus driver for Broadcom specific Advanced Microcontroller Bus + Architecture. + +config BCMA_HOST_PCI_POSSIBLE + bool + depends on BCMA && PCI = y + default y + +config BCMA_HOST_PCI + bool "Support for BCMA on PCI-host bus" + depends on BCMA_HOST_PCI_POSSIBLE + +config BCMA_DEBUG + bool "BCMA debugging" + depends on BCMA + help + This turns on additional debugging messages. + + If unsure, say N + +endmenu diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile new file mode 100644 index 000000000000..0d56245bcb79 --- /dev/null +++ b/drivers/bcma/Makefile @@ -0,0 +1,7 @@ +bcma-y += main.o scan.o core.o +bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o +bcma-y += driver_pci.o +bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o +obj-$(CONFIG_BCMA) += bcma.o + +ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG diff --git a/drivers/bcma/README b/drivers/bcma/README new file mode 100644 index 000000000000..f7e7ce46c603 --- /dev/null +++ b/drivers/bcma/README @@ -0,0 +1,19 @@ +Broadcom introduced new bus as replacement for older SSB. It is based on AMBA, +however from programming point of view there is nothing AMBA specific we use. + +Standard AMBA drivers are platform specific, have hardcoded addresses and use +AMBA standard fields like CID and PID. + +In case of Broadcom's cards every device consists of: +1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated + as standard AMBA device. Reading it's CID or PID can cause machine lockup. +2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID) + and PIDs (0x103BB369), but we do not use that info for anything. One of that + devices is used for managing Broadcom specific core. + +Addresses of AMBA devices are not hardcoded in driver and have to be read from +EPROM. + +In this situation we decided to introduce separated bus. It can contain up to +16 devices identified by Broadcom specific fields: manufacturer, id, revision +and class. diff --git a/drivers/bcma/TODO b/drivers/bcma/TODO new file mode 100644 index 000000000000..da7aa99fe81c --- /dev/null +++ b/drivers/bcma/TODO @@ -0,0 +1,3 @@ +- Interrupts +- Defines for PCI core driver +- Create kernel Documentation (use info from README) diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h new file mode 100644 index 000000000000..2f72e9c585fd --- /dev/null +++ b/drivers/bcma/bcma_private.h @@ -0,0 +1,28 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + +#ifndef pr_fmt +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#endif + +#include <linux/bcma/bcma.h> +#include <linux/delay.h> + +#define BCMA_CORE_SIZE 0x1000 + +struct bcma_bus; + +/* main.c */ +extern int bcma_bus_register(struct bcma_bus *bus); +extern void bcma_bus_unregister(struct bcma_bus *bus); + +/* scan.c */ +int bcma_bus_scan(struct bcma_bus *bus); + +#ifdef CONFIG_BCMA_HOST_PCI +/* host_pci.c */ +extern int __init bcma_host_pci_init(void); +extern void __exit bcma_host_pci_exit(void); +#endif /* CONFIG_BCMA_HOST_PCI */ + +#endif diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c new file mode 100644 index 000000000000..ced379f7b371 --- /dev/null +++ b/drivers/bcma/core.c @@ -0,0 +1,51 @@ +/* + * Broadcom specific AMBA + * Core ops + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/bcma/bcma.h> + +bool bcma_core_is_enabled(struct bcma_device *core) +{ + if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC)) + != BCMA_IOCTL_CLK) + return false; + if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) + return false; + return true; +} +EXPORT_SYMBOL_GPL(bcma_core_is_enabled); + +static void bcma_core_disable(struct bcma_device *core, u32 flags) +{ + if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) + return; + + bcma_awrite32(core, BCMA_IOCTL, flags); + bcma_aread32(core, BCMA_IOCTL); + udelay(10); + + bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); + udelay(1); +} + +int bcma_core_enable(struct bcma_device *core, u32 flags) +{ + bcma_core_disable(core, flags); + + bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags)); + bcma_aread32(core, BCMA_IOCTL); + + bcma_awrite32(core, BCMA_RESET_CTL, 0); + udelay(1); + + bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags)); + bcma_aread32(core, BCMA_IOCTL); + udelay(1); + + return 0; +} +EXPORT_SYMBOL_GPL(bcma_core_enable); diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c new file mode 100644 index 000000000000..caf596091d4d --- /dev/null +++ b/drivers/bcma/driver_chipcommon.c @@ -0,0 +1,87 @@ +/* + * Broadcom specific AMBA + * ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/bcma/bcma.h> + +static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset, + u32 mask, u32 value) +{ + value &= mask; + value |= bcma_cc_read32(cc, offset) & ~mask; + bcma_cc_write32(cc, offset, value); + + return value; +} + +void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) +{ + if (cc->core->id.rev >= 11) + cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); + if (cc->core->id.rev >= 35) + cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT); + + bcma_cc_write32(cc, 0x58, 0); + bcma_cc_write32(cc, 0x5C, 0); + + if (cc->capabilities & BCMA_CC_CAP_PMU) + bcma_pmu_init(cc); + if (cc->capabilities & BCMA_CC_CAP_PCTL) + pr_err("Power control not implemented!\n"); +} + +/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ +void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks) +{ + /* instant NMI */ + bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks); +} + +void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + bcma_cc_write32_masked(cc, BCMA_CC_IRQMASK, mask, value); +} + +u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask) +{ + return bcma_cc_read32(cc, BCMA_CC_IRQSTAT) & mask; +} + +u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask) +{ + return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask; +} + +u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value); +} + +u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value); +} + +u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value); +} +EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control); + +u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value); +} + +u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); +} diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c new file mode 100644 index 000000000000..f44177a644c7 --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -0,0 +1,134 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver + * + * Copyright 2009, Michael Buesch <mb@bu3sch.de> + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/bcma/bcma.h> + +static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set) +{ + u32 value; + + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); + value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); + value &= mask; + value |= set; + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); +} + +static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4313: + case 0x4331: + case 43224: + case 43225: + break; + default: + pr_err("PLL init unknown for device 0x%04X\n", + bus->chipinfo.id); + } +} + +static void bcma_pmu_resources_init(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + u32 min_msk = 0, max_msk = 0; + + switch (bus->chipinfo.id) { + case 0x4313: + min_msk = 0x200D; + max_msk = 0xFFFF; + break; + case 43224: + break; + default: + pr_err("PMU resource config unknown for device 0x%04X\n", + bus->chipinfo.id); + } + + /* Set the resource masks. */ + if (min_msk) + bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk); + if (max_msk) + bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk); +} + +void bcma_pmu_swreg_init(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4313: + case 0x4331: + case 43224: + break; + default: + pr_err("PMU switch/regulators init unknown for device " + "0x%04X\n", bus->chipinfo.id); + } +} + +void bcma_pmu_workarounds(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4313: + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); + break; + case 0x4331: + pr_err("Enabling Ext PA lines not implemented\n"); + break; + case 43224: + if (bus->chipinfo.rev == 0) { + pr_err("Workarounds for 43224 rev 0 not fully " + "implemented\n"); + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); + } else { + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); + } + break; + default: + pr_err("Workarounds unknown for device 0x%04X\n", + bus->chipinfo.id); + } +} + +void bcma_pmu_init(struct bcma_drv_cc *cc) +{ + u32 pmucap; + + pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP); + cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION); + + pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, + pmucap); + + if (cc->pmu.rev == 1) + bcma_cc_mask32(cc, BCMA_CC_PMU_CTL, + ~BCMA_CC_PMU_CTL_NOILPONW); + else + bcma_cc_set32(cc, BCMA_CC_PMU_CTL, + BCMA_CC_PMU_CTL_NOILPONW); + + if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2) + pr_err("Fix for 4329b0 bad LPOM state not implemented!\n"); + + bcma_pmu_pll_init(cc); + bcma_pmu_resources_init(cc); + bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); +} diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c new file mode 100644 index 000000000000..b98b8359bef5 --- /dev/null +++ b/drivers/bcma/driver_pci.c @@ -0,0 +1,163 @@ +/* + * Broadcom specific AMBA + * PCI Core + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/bcma/bcma.h> + +/************************************************** + * R/W ops. + **************************************************/ + +static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) +{ + pcicore_write32(pc, 0x130, address); + pcicore_read32(pc, 0x130); + return pcicore_read32(pc, 0x134); +} + +#if 0 +static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) +{ + pcicore_write32(pc, 0x130, address); + pcicore_read32(pc, 0x130); + pcicore_write32(pc, 0x134, data); +} +#endif + +static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +{ + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + u32 v; + int i; + + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 28); /* Write Transaction */ + v |= (1 << 17); /* Turnaround */ + v |= (0x1F << 18); + v |= (phy << 4); + pcicore_write32(pc, mdio_data, v); + + udelay(10); + for (i = 0; i < 200; i++) { + v = pcicore_read32(pc, mdio_control); + if (v & 0x100 /* Trans complete */) + break; + msleep(1); + } +} + +static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) +{ + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + + v = 0x80; /* Enable Preamble Sequence */ + v |= 0x2; /* MDIO Clock Divisor */ + pcicore_write32(pc, mdio_control, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); + } + + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 29); /* Read Transaction */ + v |= (1 << 17); /* Turnaround */ + if (pc->core->id.rev < 10) + v |= (u32)device << 22; + v |= (u32)address << 18; + pcicore_write32(pc, mdio_data, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < 200; i++) { + v = pcicore_read32(pc, mdio_control); + if (v & 0x100 /* Trans complete */) { + udelay(10); + ret = pcicore_read32(pc, mdio_data); + break; + } + msleep(1); + } + pcicore_write32(pc, mdio_control, 0); + return ret; +} + +static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) +{ + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + + v = 0x80; /* Enable Preamble Sequence */ + v |= 0x2; /* MDIO Clock Divisor */ + pcicore_write32(pc, mdio_control, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); + } + + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 28); /* Write Transaction */ + v |= (1 << 17); /* Turnaround */ + if (pc->core->id.rev < 10) + v |= (u32)device << 22; + v |= (u32)address << 18; + v |= data; + pcicore_write32(pc, mdio_data, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { + v = pcicore_read32(pc, mdio_control); + if (v & 0x100 /* Trans complete */) + break; + msleep(1); + } + pcicore_write32(pc, mdio_control, 0); +} + +/************************************************** + * Workarounds. + **************************************************/ + +static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) +{ + return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; +} + +static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) +{ + const u8 serdes_pll_device = 0x1D; + const u8 serdes_rx_device = 0x1F; + u16 tmp; + + bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, + bcma_pcicore_polarity_workaround(pc)); + tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); + if (tmp & 0x4000) + bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); +} + +/************************************************** + * Init. + **************************************************/ + +void bcma_core_pci_init(struct bcma_drv_pci *pc) +{ + bcma_pcicore_serdes_workaround(pc); +} diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c new file mode 100644 index 000000000000..99dd36e8500b --- /dev/null +++ b/drivers/bcma/host_pci.c @@ -0,0 +1,196 @@ +/* + * Broadcom specific AMBA + * PCI Host + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/bcma/bcma.h> +#include <linux/pci.h> + +static void bcma_host_pci_switch_core(struct bcma_device *core) +{ + pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN, + core->addr); + pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2, + core->wrap); + core->bus->mapped_core = core; + pr_debug("Switched to core: 0x%X\n", core->id.id); +} + +static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + return ioread8(core->bus->mmio + offset); +} + +static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + return ioread16(core->bus->mmio + offset); +} + +static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + return ioread32(core->bus->mmio + offset); +} + +static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + iowrite8(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + iowrite16(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + iowrite32(value, core->bus->mmio + offset); +} + +static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); +} + +static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset, + u32 value) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); +} + +const struct bcma_host_ops bcma_host_pci_ops = { + .read8 = bcma_host_pci_read8, + .read16 = bcma_host_pci_read16, + .read32 = bcma_host_pci_read32, + .write8 = bcma_host_pci_write8, + .write16 = bcma_host_pci_write16, + .write32 = bcma_host_pci_write32, + .aread32 = bcma_host_pci_aread32, + .awrite32 = bcma_host_pci_awrite32, +}; + +static int bcma_host_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct bcma_bus *bus; + int err = -ENOMEM; + const char *name; + u32 val; + + /* Alloc */ + bus = kzalloc(sizeof(*bus), GFP_KERNEL); + if (!bus) + goto out; + + /* Basic PCI configuration */ + err = pci_enable_device(dev); + if (err) + goto err_kfree_bus; + + name = dev_name(&dev->dev); + if (dev->driver && dev->driver->name) + name = dev->driver->name; + err = pci_request_regions(dev, name); + if (err) + goto err_pci_disable; + pci_set_master(dev); + + /* Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_read_config_dword(dev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(dev, 0x40, val & 0xffff00ff); + + /* SSB needed additional powering up, do we have any AMBA PCI cards? */ + if (!pci_is_pcie(dev)) + pr_err("PCI card detected, report problems.\n"); + + /* Map MMIO */ + err = -ENOMEM; + bus->mmio = pci_iomap(dev, 0, ~0UL); + if (!bus->mmio) + goto err_pci_release_regions; + + /* Host specific */ + bus->host_pci = dev; + bus->hosttype = BCMA_HOSTTYPE_PCI; + bus->ops = &bcma_host_pci_ops; + + /* Register */ + err = bcma_bus_register(bus); + if (err) + goto err_pci_unmap_mmio; + + pci_set_drvdata(dev, bus); + +out: + return err; + +err_pci_unmap_mmio: + pci_iounmap(dev, bus->mmio); +err_pci_release_regions: + pci_release_regions(dev); +err_pci_disable: + pci_disable_device(dev); +err_kfree_bus: + kfree(bus); + return err; +} + +static void bcma_host_pci_remove(struct pci_dev *dev) +{ + struct bcma_bus *bus = pci_get_drvdata(dev); + + bcma_bus_unregister(bus); + pci_iounmap(dev, bus->mmio); + pci_release_regions(dev); + pci_disable_device(dev); + kfree(bus); + pci_set_drvdata(dev, NULL); +} + +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl); + +static struct pci_driver bcma_pci_bridge_driver = { + .name = "bcma-pci-bridge", + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, +}; + +int __init bcma_host_pci_init(void) +{ + return pci_register_driver(&bcma_pci_bridge_driver); +} + +void __exit bcma_host_pci_exit(void) +{ + pci_unregister_driver(&bcma_pci_bridge_driver); +} diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c new file mode 100644 index 000000000000..be52344ed19d --- /dev/null +++ b/drivers/bcma/main.c @@ -0,0 +1,247 @@ +/* + * Broadcom specific AMBA + * Bus subsystem + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/bcma/bcma.h> + +MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); +MODULE_LICENSE("GPL"); + +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); + +static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + return sprintf(buf, "0x%03X\n", core->id.manuf); +} +static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + return sprintf(buf, "0x%03X\n", core->id.id); +} +static ssize_t rev_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + return sprintf(buf, "0x%02X\n", core->id.rev); +} +static ssize_t class_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + return sprintf(buf, "0x%X\n", core->id.class); +} +static struct device_attribute bcma_device_attrs[] = { + __ATTR_RO(manuf), + __ATTR_RO(id), + __ATTR_RO(rev), + __ATTR_RO(class), + __ATTR_NULL, +}; + +static struct bus_type bcma_bus_type = { + .name = "bcma", + .match = bcma_bus_match, + .probe = bcma_device_probe, + .remove = bcma_device_remove, + .dev_attrs = bcma_device_attrs, +}; + +static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) +{ + struct bcma_device *core; + + list_for_each_entry(core, &bus->cores, list) { + if (core->id.id == coreid) + return core; + } + return NULL; +} + +static void bcma_release_core_dev(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + kfree(core); +} + +static int bcma_register_cores(struct bcma_bus *bus) +{ + struct bcma_device *core; + int err, dev_id = 0; + + list_for_each_entry(core, &bus->cores, list) { + /* We support that cores ourself */ + switch (core->id.id) { + case BCMA_CORE_CHIPCOMMON: + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: + continue; + } + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; + dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: + core->dev.parent = &bus->host_pci->dev; + break; + case BCMA_HOSTTYPE_NONE: + case BCMA_HOSTTYPE_SDIO: + break; + } + + err = device_register(&core->dev); + if (err) { + pr_err("Could not register dev for core 0x%03X\n", + core->id.id); + continue; + } + core->dev_registered = true; + dev_id++; + } + + return 0; +} + +static void bcma_unregister_cores(struct bcma_bus *bus) +{ + struct bcma_device *core; + + list_for_each_entry(core, &bus->cores, list) { + if (core->dev_registered) + device_unregister(&core->dev); + } +} + +int bcma_bus_register(struct bcma_bus *bus) +{ + int err; + struct bcma_device *core; + + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { + pr_err("Failed to scan: %d\n", err); + return -1; + } + + /* Init CC core */ + core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); + if (core) { + bus->drv_cc.core = core; + bcma_core_chipcommon_init(&bus->drv_cc); + } + + /* Init PCIE core */ + core = bcma_find_core(bus, BCMA_CORE_PCIE); + if (core) { + bus->drv_pci.core = core; + bcma_core_pci_init(&bus->drv_pci); + } + + /* Register found cores */ + bcma_register_cores(bus); + + pr_info("Bus registered\n"); + + return 0; +} +EXPORT_SYMBOL_GPL(bcma_bus_register); + +void bcma_bus_unregister(struct bcma_bus *bus) +{ + bcma_unregister_cores(bus); +} +EXPORT_SYMBOL_GPL(bcma_bus_unregister); + +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) +{ + drv->drv.name = drv->name; + drv->drv.bus = &bcma_bus_type; + drv->drv.owner = owner; + + return driver_register(&drv->drv); +} +EXPORT_SYMBOL_GPL(__bcma_driver_register); + +void bcma_driver_unregister(struct bcma_driver *drv) +{ + driver_unregister(&drv->drv); +} +EXPORT_SYMBOL_GPL(bcma_driver_unregister); + +static int bcma_bus_match(struct device *dev, struct device_driver *drv) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); + const struct bcma_device_id *cid = &core->id; + const struct bcma_device_id *did; + + for (did = adrv->id_table; did->manuf || did->id || did->rev; did++) { + if ((did->manuf == cid->manuf || did->manuf == BCMA_ANY_MANUF) && + (did->id == cid->id || did->id == BCMA_ANY_ID) && + (did->rev == cid->rev || did->rev == BCMA_ANY_REV) && + (did->class == cid->class || did->class == BCMA_ANY_CLASS)) + return 1; + } + return 0; +} + +static int bcma_device_probe(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver, + drv); + int err = 0; + + if (adrv->probe) + err = adrv->probe(core); + + return err; +} + +static int bcma_device_remove(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver, + drv); + + if (adrv->remove) + adrv->remove(core); + + return 0; +} + +static int __init bcma_modinit(void) +{ + int err; + + err = bus_register(&bcma_bus_type); + if (err) + return err; + +#ifdef CONFIG_BCMA_HOST_PCI + err = bcma_host_pci_init(); + if (err) { + pr_err("PCI host initialization failed\n"); + err = 0; + } +#endif + + return err; +} +fs_initcall(bcma_modinit); + +static void __exit bcma_modexit(void) +{ +#ifdef CONFIG_BCMA_HOST_PCI + bcma_host_pci_exit(); +#endif + bus_unregister(&bcma_bus_type); +} +module_exit(bcma_modexit) diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c new file mode 100644 index 000000000000..40d7dcce8933 --- /dev/null +++ b/drivers/bcma/scan.c @@ -0,0 +1,360 @@ +/* + * Broadcom specific AMBA + * Bus scanning + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "scan.h" +#include "bcma_private.h" + +#include <linux/bcma/bcma.h> +#include <linux/bcma/bcma_regs.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> + +struct bcma_device_id_name { + u16 id; + const char *name; +}; +struct bcma_device_id_name bcma_device_names[] = { + { BCMA_CORE_OOB_ROUTER, "OOB Router" }, + { BCMA_CORE_INVALID, "Invalid" }, + { BCMA_CORE_CHIPCOMMON, "ChipCommon" }, + { BCMA_CORE_ILINE20, "ILine 20" }, + { BCMA_CORE_SRAM, "SRAM" }, + { BCMA_CORE_SDRAM, "SDRAM" }, + { BCMA_CORE_PCI, "PCI" }, + { BCMA_CORE_MIPS, "MIPS" }, + { BCMA_CORE_ETHERNET, "Fast Ethernet" }, + { BCMA_CORE_V90, "V90" }, + { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" }, + { BCMA_CORE_ADSL, "ADSL" }, + { BCMA_CORE_ILINE100, "ILine 100" }, + { BCMA_CORE_IPSEC, "IPSEC" }, + { BCMA_CORE_UTOPIA, "UTOPIA" }, + { BCMA_CORE_PCMCIA, "PCMCIA" }, + { BCMA_CORE_INTERNAL_MEM, "Internal Memory" }, + { BCMA_CORE_MEMC_SDRAM, "MEMC SDRAM" }, + { BCMA_CORE_OFDM, "OFDM" }, + { BCMA_CORE_EXTIF, "EXTIF" }, + { BCMA_CORE_80211, "IEEE 802.11" }, + { BCMA_CORE_PHY_A, "PHY A" }, + { BCMA_CORE_PHY_B, "PHY B" }, + { BCMA_CORE_PHY_G, "PHY G" }, + { BCMA_CORE_MIPS_3302, "MIPS 3302" }, + { BCMA_CORE_USB11_HOST, "USB 1.1 Host" }, + { BCMA_CORE_USB11_DEV, "USB 1.1 Device" }, + { BCMA_CORE_USB20_HOST, "USB 2.0 Host" }, + { BCMA_CORE_USB20_DEV, "USB 2.0 Device" }, + { BCMA_CORE_SDIO_HOST, "SDIO Host" }, + { BCMA_CORE_ROBOSWITCH, "Roboswitch" }, + { BCMA_CORE_PARA_ATA, "PATA" }, + { BCMA_CORE_SATA_XORDMA, "SATA XOR-DMA" }, + { BCMA_CORE_ETHERNET_GBIT, "GBit Ethernet" }, + { BCMA_CORE_PCIE, "PCIe" }, + { BCMA_CORE_PHY_N, "PHY N" }, + { BCMA_CORE_SRAM_CTL, "SRAM Controller" }, + { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" }, + { BCMA_CORE_ARM_1176, "ARM 1176" }, + { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, + { BCMA_CORE_PHY_LP, "PHY LP" }, + { BCMA_CORE_PMU, "PMU" }, + { BCMA_CORE_PHY_SSN, "PHY SSN" }, + { BCMA_CORE_SDIO_DEV, "SDIO Device" }, + { BCMA_CORE_ARM_CM3, "ARM CM3" }, + { BCMA_CORE_PHY_HT, "PHY HT" }, + { BCMA_CORE_MIPS_74K, "MIPS 74K" }, + { BCMA_CORE_MAC_GBIT, "GBit MAC" }, + { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" }, + { BCMA_CORE_PCIE_RC, "PCIe Root Complex" }, + { BCMA_CORE_OCP_OCP_BRIDGE, "OCP to OCP Bridge" }, + { BCMA_CORE_SHARED_COMMON, "Common Shared" }, + { BCMA_CORE_OCP_AHB_BRIDGE, "OCP to AHB Bridge" }, + { BCMA_CORE_SPI_HOST, "SPI Host" }, + { BCMA_CORE_I2S, "I2S" }, + { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, + { BCMA_CORE_SHIM, "SHIM" }, + { BCMA_CORE_DEFAULT, "Default" }, +}; +const char *bcma_device_name(struct bcma_device_id *id) +{ + int i; + + if (id->manuf == BCMA_MANUF_BCM) { + for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) { + if (bcma_device_names[i].id == id->id) + return bcma_device_names[i].name; + } + } + return "UNKNOWN"; +} + +static u32 bcma_scan_read32(struct bcma_bus *bus, u8 current_coreidx, + u16 offset) +{ + return readl(bus->mmio + offset); +} + +static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr) +{ + if (bus->hosttype == BCMA_HOSTTYPE_PCI) + pci_write_config_dword(bus->host_pci, BCMA_PCI_BAR0_WIN, + addr); +} + +static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = readl(*eromptr); + (*eromptr)++; + return ent; +} + +static void bcma_erom_push_ent(u32 **eromptr) +{ + (*eromptr)--; +} + +static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = bcma_erom_get_ent(bus, eromptr); + if (!(ent & SCAN_ER_VALID)) + return -ENOENT; + if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_CI) + return -ENOENT; + return ent; +} + +static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = bcma_erom_get_ent(bus, eromptr); + bcma_erom_push_ent(eromptr); + return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID)); +} + +static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = bcma_erom_get_ent(bus, eromptr); + bcma_erom_push_ent(eromptr); + return (((ent & SCAN_ER_VALID)) && + ((ent & SCAN_ER_TAGX) == SCAN_ER_TAG_ADDR) && + ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE)); +} + +static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent; + while (1) { + ent = bcma_erom_get_ent(bus, eromptr); + if ((ent & SCAN_ER_VALID) && + ((ent & SCAN_ER_TAG) == SCAN_ER_TAG_CI)) + break; + if (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID)) + break; + } + bcma_erom_push_ent(eromptr); +} + +static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = bcma_erom_get_ent(bus, eromptr); + if (!(ent & SCAN_ER_VALID)) + return -ENOENT; + if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_MP) + return -ENOENT; + return ent; +} + +static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr, + u32 type, u8 port) +{ + u32 addrl, addrh, sizel, sizeh = 0; + u32 size; + + u32 ent = bcma_erom_get_ent(bus, eromptr); + if ((!(ent & SCAN_ER_VALID)) || + ((ent & SCAN_ER_TAGX) != SCAN_ER_TAG_ADDR) || + ((ent & SCAN_ADDR_TYPE) != type) || + (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { + bcma_erom_push_ent(eromptr); + return -EINVAL; + } + + addrl = ent & SCAN_ADDR_ADDR; + if (ent & SCAN_ADDR_AG32) + addrh = bcma_erom_get_ent(bus, eromptr); + else + addrh = 0; + + if ((ent & SCAN_ADDR_SZ) == SCAN_ADDR_SZ_SZD) { + size = bcma_erom_get_ent(bus, eromptr); + sizel = size & SCAN_SIZE_SZ; + if (size & SCAN_SIZE_SG32) + sizeh = bcma_erom_get_ent(bus, eromptr); + } else + sizel = SCAN_ADDR_SZ_BASE << + ((ent & SCAN_ADDR_SZ) >> SCAN_ADDR_SZ_SHIFT); + + return addrl; +} + +int bcma_bus_scan(struct bcma_bus *bus) +{ + u32 erombase; + u32 __iomem *eromptr, *eromend; + + s32 cia, cib; + u8 ports[2], wrappers[2]; + + s32 tmp; + u8 i, j; + + int err; + + INIT_LIST_HEAD(&bus->cores); + bus->nr_cores = 0; + + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); + bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); + eromptr = bus->mmio; + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; + INIT_LIST_HEAD(&core->list); + core->bus = bus; + + /* get CIs */ + cia = bcma_erom_get_ci(bus, &eromptr); + if (cia < 0) { + bcma_erom_push_ent(&eromptr); + if (bcma_erom_is_end(bus, &eromptr)) + break; + err= -EILSEQ; + goto out; + } + cib = bcma_erom_get_ci(bus, &eromptr); + if (cib < 0) { + err= -EILSEQ; + goto out; + } + + /* parse CIs */ + core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; + core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; + core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; + ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; + ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; + wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; + wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; + core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; + + if (((core->id.manuf == BCMA_MANUF_ARM) && + (core->id.id == 0xFFF)) || + (ports[1] == 0)) { + bcma_erom_skip_component(bus, &eromptr); + continue; + } + + /* check if component is a core at all */ + if (wrappers[0] + wrappers[1] == 0) { + /* we could save addrl of the router + if (cid == BCMA_CORE_OOB_ROUTER) + */ + bcma_erom_skip_component(bus, &eromptr); + continue; + } + + if (bcma_erom_is_bridge(bus, &eromptr)) { + bcma_erom_skip_component(bus, &eromptr); + continue; + } + + /* get & parse master ports */ + for (i = 0; i < ports[0]; i++) { + u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); + if (mst_port_d < 0) { + err= -EILSEQ; + goto out; + } + } + + /* get & parse slave ports */ + for (i = 0; i < ports[1]; i++) { + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, &eromptr, + SCAN_ADDR_TYPE_SLAVE, i); + if (tmp < 0) { + /* no more entries for port _i_ */ + /* pr_debug("erom: slave port %d " + * "has %d descriptors\n", i, j); */ + break; + } else { + if (i == 0 && j == 0) + core->addr = tmp; + } + } + } + + /* get & parse master wrappers */ + for (i = 0; i < wrappers[0]; i++) { + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, &eromptr, + SCAN_ADDR_TYPE_MWRAP, i); + if (tmp < 0) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * "has %d descriptors\n", i, j); */ + break; + } else { + if (i == 0 && j == 0) + core->wrap = tmp; + } + } + } + + /* get & parse slave wrappers */ + for (i = 0; i < wrappers[1]; i++) { + u8 hack = (ports[1] == 1) ? 0 : 1; + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, &eromptr, + SCAN_ADDR_TYPE_SWRAP, i + hack); + if (tmp < 0) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * has %d descriptors\n", i, j); */ + break; + } else { + if (wrappers[0] == 0 && !i && !j) + core->wrap = tmp; + } + } + } + + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", + bus->nr_cores, bcma_device_name(&core->id), + core->id.manuf, core->id.id, core->id.rev, + core->id.class); + + core->core_index = bus->nr_cores++; + list_add(&core->list, &bus->cores); + continue; +out: + return err; + } + + return 0; +} diff --git a/drivers/bcma/scan.h b/drivers/bcma/scan.h new file mode 100644 index 000000000000..113e6a66884c --- /dev/null +++ b/drivers/bcma/scan.h @@ -0,0 +1,56 @@ +#ifndef BCMA_SCAN_H_ +#define BCMA_SCAN_H_ + +#define BCMA_ADDR_BASE 0x18000000 +#define BCMA_WRAP_BASE 0x18100000 + +#define SCAN_ER_VALID 0x00000001 +#define SCAN_ER_TAGX 0x00000006 /* we have to ignore 0x8 bit when checking tag for SCAN_ER_TAG_ADDR */ +#define SCAN_ER_TAG 0x0000000E +#define SCAN_ER_TAG_CI 0x00000000 +#define SCAN_ER_TAG_MP 0x00000002 +#define SCAN_ER_TAG_ADDR 0x00000004 +#define SCAN_ER_TAG_END 0x0000000E +#define SCAN_ER_BAD 0xFFFFFFFF + +#define SCAN_CIA_CLASS 0x000000F0 +#define SCAN_CIA_CLASS_SHIFT 4 +#define SCAN_CIA_ID 0x000FFF00 +#define SCAN_CIA_ID_SHIFT 8 +#define SCAN_CIA_MANUF 0xFFF00000 +#define SCAN_CIA_MANUF_SHIFT 20 + +#define SCAN_CIB_NMP 0x000001F0 +#define SCAN_CIB_NMP_SHIFT 4 +#define SCAN_CIB_NSP 0x00003E00 +#define SCAN_CIB_NSP_SHIFT 9 +#define SCAN_CIB_NMW 0x0007C000 +#define SCAN_CIB_NMW_SHIFT 14 +#define SCAN_CIB_NSW 0x00F80000 +#define SCAN_CIB_NSW_SHIFT 17 +#define SCAN_CIB_REV 0xFF000000 +#define SCAN_CIB_REV_SHIFT 24 + +#define SCAN_ADDR_AG32 0x00000008 +#define SCAN_ADDR_SZ 0x00000030 +#define SCAN_ADDR_SZ_SHIFT 4 +#define SCAN_ADDR_SZ_4K 0x00000000 +#define SCAN_ADDR_SZ_8K 0x00000010 +#define SCAN_ADDR_SZ_16K 0x00000020 +#define SCAN_ADDR_SZ_SZD 0x00000030 +#define SCAN_ADDR_TYPE 0x000000C0 +#define SCAN_ADDR_TYPE_SLAVE 0x00000000 +#define SCAN_ADDR_TYPE_BRIDGE 0x00000040 +#define SCAN_ADDR_TYPE_SWRAP 0x00000080 +#define SCAN_ADDR_TYPE_MWRAP 0x000000C0 +#define SCAN_ADDR_PORT 0x00000F00 +#define SCAN_ADDR_PORT_SHIFT 8 +#define SCAN_ADDR_ADDR 0xFFFFF000 + +#define SCAN_ADDR_SZ_BASE 0x00001000 /* 4KB */ + +#define SCAN_SIZE_SZ_ALIGN 0x00000FFF +#define SCAN_SIZE_SZ 0xFFFFF000 +#define SCAN_SIZE_SG32 0x00000008 + +#endif /* BCMA_SCAN_H_ */ |