diff options
Diffstat (limited to 'drivers')
33 files changed, 14261 insertions, 0 deletions
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 84832feb56f6..4c3789d61a81 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -23,5 +23,6 @@ menuconfig STAGING if STAGING +source "drivers/staging/et131x/Kconfig" endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index ceb0328a64a8..933b984b5235 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -1,2 +1,3 @@ # Makefile for staging directory +obj-$(CONFIG_ET131X) += et131x/ diff --git a/drivers/staging/et131x/Kconfig b/drivers/staging/et131x/Kconfig new file mode 100644 index 000000000000..e11cf340856a --- /dev/null +++ b/drivers/staging/et131x/Kconfig @@ -0,0 +1,18 @@ +config ET131X + tristate "Agere ET-1310 Gigabit Ethernet support" + depends on NETDEV_1000 && PCI + default n + ---help--- + This driver supports Agere ET-1310 ethernet adapters. + + To compile this driver as a module, choose M here. The module + will be called et131x. + +config ET131X_DEBUG + bool "Enable et131x debugging" + depends on ET131X + default n + ---help--- + Say Y for detailed debug information. + + If in doubt, say N. diff --git a/drivers/staging/et131x/Makefile b/drivers/staging/et131x/Makefile new file mode 100644 index 000000000000..3ad571d8a684 --- /dev/null +++ b/drivers/staging/et131x/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for the Agere ET-131x ethernet driver +# + +obj-$(CONFIG_ET131X) += et131x.o + +et131x-objs := et1310_eeprom.o \ + et1310_jagcore.o \ + et1310_mac.o \ + et1310_phy.o \ + et1310_pm.o \ + et1310_rx.o \ + et1310_tx.o \ + et131x_config.o \ + et131x_debug.o \ + et131x_initpci.o \ + et131x_isr.o \ + et131x_netdev.o diff --git a/drivers/staging/et131x/README b/drivers/staging/et131x/README new file mode 100644 index 000000000000..28752a502312 --- /dev/null +++ b/drivers/staging/et131x/README @@ -0,0 +1,25 @@ +This is a driver for the ET1310 network device. + +Based on the driver found at https://sourceforge.net/projects/et131x/ + +Cleaned up immensely by Olaf Hartman <o.hartmann@telovital.com> and Christoph +Hellwig <hch@infradead.org> + +Note, the powermanagement options were removed from the vendor provided +driver as they did not build properly at the time. + +TODO: + - kernel coding style cleanups + - forward port for latest network driver changes + - kill useless typecasts (e.g. in et1310_phy.c) + - alloc_etherdev is initializing memory with zero?!? + - add_timer call in et131x_netdev.c is correct? + - Add power saving functionality (suspend, sleep, resume) + - Implement a few more kernel Parameter (set mac ) + +Please send patches to: + Greg Kroah-Hartman <gregkh@suse.de> + +And Cc: Olaf Hartmann <o.hartmann@telovital.com> as he has this device and can +test any changes. + diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h new file mode 100644 index 000000000000..3c85999d64db --- /dev/null +++ b/drivers/staging/et131x/et1310_address_map.h @@ -0,0 +1,2399 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_address_map.h - Contains the register mapping for the ET1310 + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef _ET1310_ADDRESS_MAP_H_ +#define _ET1310_ADDRESS_MAP_H_ + + +/* START OF GLOBAL REGISTER ADDRESS MAP */ + +typedef union _Q_ADDR_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:22; // bits 10-31 + u32 addr:10; // bits 0-9 +#else + u32 addr:10; // bits 0-9 + u32 unused:22; // bits 10-31 +#endif + } bits; +} Q_ADDR_t, *PQ_ADDR_t; + +/* + * structure for tx queue start address reg in global address map + * located at address 0x0000 + * Defined earlier (Q_ADDR_t) + */ + +/* + * structure for tx queue end address reg in global address map + * located at address 0x0004 + * Defined earlier (Q_ADDR_t) + */ + +/* + * structure for rx queue start address reg in global address map + * located at address 0x0008 + * Defined earlier (Q_ADDR_t) + */ + +/* + * structure for rx queue end address reg in global address map + * located at address 0x000C + * Defined earlier (Q_ADDR_t) + */ + +/* + * structure for power management control status reg in global address map + * located at address 0x0010 + */ +typedef union _PM_CSR_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:22; // bits 10-31 + u32 pm_jagcore_rx_rdy:1; // bit 9 + u32 pm_jagcore_tx_rdy:1; // bit 8 + u32 pm_phy_lped_en:1; // bit 7 + u32 pm_phy_sw_coma:1; // bit 6 + u32 pm_rxclk_gate:1; // bit 5 + u32 pm_txclk_gate:1; // bit 4 + u32 pm_sysclk_gate:1; // bit 3 + u32 pm_jagcore_rx_en:1; // bit 2 + u32 pm_jagcore_tx_en:1; // bit 1 + u32 pm_gigephy_en:1; // bit 0 +#else + u32 pm_gigephy_en:1; // bit 0 + u32 pm_jagcore_tx_en:1; // bit 1 + u32 pm_jagcore_rx_en:1; // bit 2 + u32 pm_sysclk_gate:1; // bit 3 + u32 pm_txclk_gate:1; // bit 4 + u32 pm_rxclk_gate:1; // bit 5 + u32 pm_phy_sw_coma:1; // bit 6 + u32 pm_phy_lped_en:1; // bit 7 + u32 pm_jagcore_tx_rdy:1; // bit 8 + u32 pm_jagcore_rx_rdy:1; // bit 9 + u32 unused:22; // bits 10-31 +#endif + } bits; +} PM_CSR_t, *PPM_CSR_t; + +/* + * structure for interrupt status reg in global address map + * located at address 0x0018 + */ +typedef union _INTERRUPT_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused5:11; // bits 21-31 + u32 slv_timeout:1; // bit 20 + u32 mac_stat_interrupt:1; // bit 19 + u32 rxmac_interrupt:1; // bit 18 + u32 txmac_interrupt:1; // bit 17 + u32 phy_interrupt:1; // bit 16 + u32 wake_on_lan:1; // bit 15 + u32 watchdog_interrupt:1; // bit 14 + u32 unused4:4; // bits 10-13 + u32 rxdma_err:1; // bit 9 + u32 rxdma_pkt_stat_ring_low:1; // bit 8 + u32 rxdma_fb_ring1_low:1; // bit 7 + u32 rxdma_fb_ring0_low:1; // bit 6 + u32 rxdma_xfr_done:1; // bit 5 + u32 txdma_err:1; // bit 4 + u32 txdma_isr:1; // bit 3 + u32 unused3:1; // bit 2 + u32 unused2:1; // bit 1 + u32 unused1:1; // bit 0 +#else + u32 unused1:1; // bit 0 + u32 unused2:1; // bit 1 + u32 unused3:1; // bit 2 + u32 txdma_isr:1; // bit 3 + u32 txdma_err:1; // bit 4 + u32 rxdma_xfr_done:1; // bit 5 + u32 rxdma_fb_ring0_low:1; // bit 6 + u32 rxdma_fb_ring1_low:1; // bit 7 + u32 rxdma_pkt_stat_ring_low:1; // bit 8 + u32 rxdma_err:1; // bit 9 + u32 unused4:4; // bits 10-13 + u32 watchdog_interrupt:1; // bit 14 + u32 wake_on_lan:1; // bit 15 + u32 phy_interrupt:1; // bit 16 + u32 txmac_interrupt:1; // bit 17 + u32 rxmac_interrupt:1; // bit 18 + u32 mac_stat_interrupt:1; // bit 19 + u32 slv_timeout:1; // bit 20 + u32 unused5:11; // bits 21-31 +#endif + } bits; +} INTERRUPT_t, *PINTERRUPT_t; + +/* + * structure for interrupt mask reg in global address map + * located at address 0x001C + * Defined earlier (INTERRUPT_t), but 'watchdog_interrupt' is not used. + */ + +/* + * structure for interrupt alias clear mask reg in global address map + * located at address 0x0020 + * Defined earlier (INTERRUPT_t) + */ + +/* + * structure for interrupt status alias reg in global address map + * located at address 0x0024 + * Defined earlier (INTERRUPT_t) + */ + +/* + * structure for software reset reg in global address map + * located at address 0x0028 + */ +typedef union _SW_RESET_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 selfclr_disable:1; // bit 31 + u32 unused:24; // bits 7-30 + u32 mmc_sw_reset:1; // bit 6 + u32 mac_stat_sw_reset:1; // bit 5 + u32 mac_sw_reset:1; // bit 4 + u32 rxmac_sw_reset:1; // bit 3 + u32 txmac_sw_reset:1; // bit 2 + u32 rxdma_sw_reset:1; // bit 1 + u32 txdma_sw_reset:1; // bit 0 +#else + u32 txdma_sw_reset:1; // bit 0 + u32 rxdma_sw_reset:1; // bit 1 + u32 txmac_sw_reset:1; // bit 2 + u32 rxmac_sw_reset:1; // bit 3 + u32 mac_sw_reset:1; // bit 4 + u32 mac_stat_sw_reset:1; // bit 5 + u32 mmc_sw_reset:1; // bit 6 + u32 unused:24; // bits 7-30 + u32 selfclr_disable:1; // bit 31 +#endif + } bits; +} SW_RESET_t, *PSW_RESET_t; + +/* + * structure for SLV Timer reg in global address map + * located at address 0x002C + */ +typedef union _SLV_TIMER_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:8; // bits 24-31 + u32 timer_ini:24; // bits 0-23 +#else + u32 timer_ini:24; // bits 0-23 + u32 unused:8; // bits 24-31 +#endif + } bits; +} SLV_TIMER_t, *PSLV_TIMER_t; + +/* + * structure for MSI Configuration reg in global address map + * located at address 0x0030 + */ +typedef union _MSI_CONFIG_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused1:13; // bits 19-31 + u32 msi_tc:3; // bits 16-18 + u32 unused2:11; // bits 5-15 + u32 msi_vector:5; // bits 0-4 +#else + u32 msi_vector:5; // bits 0-4 + u32 unused2:11; // bits 5-15 + u32 msi_tc:3; // bits 16-18 + u32 unused1:13; // bits 19-31 +#endif + } bits; +} MSI_CONFIG_t, *PMSI_CONFIG_t; + +/* + * structure for Loopback reg in global address map + * located at address 0x0034 + */ +typedef union _LOOPBACK_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:30; // bits 2-31 + u32 dma_loopback:1; // bit 1 + u32 mac_loopback:1; // bit 0 +#else + u32 mac_loopback:1; // bit 0 + u32 dma_loopback:1; // bit 1 + u32 unused:30; // bits 2-31 +#endif + } bits; +} LOOPBACK_t, *PLOOPBACK_t; + +/* + * GLOBAL Module of JAGCore Address Mapping + * Located at address 0x0000 + */ +typedef struct _GLOBAL_t { // Location: + Q_ADDR_t txq_start_addr; // 0x0000 + Q_ADDR_t txq_end_addr; // 0x0004 + Q_ADDR_t rxq_start_addr; // 0x0008 + Q_ADDR_t rxq_end_addr; // 0x000C + PM_CSR_t pm_csr; // 0x0010 + u32 unused; // 0x0014 + INTERRUPT_t int_status; // 0x0018 + INTERRUPT_t int_mask; // 0x001C + INTERRUPT_t int_alias_clr_en; // 0x0020 + INTERRUPT_t int_status_alias; // 0x0024 + SW_RESET_t sw_reset; // 0x0028 + SLV_TIMER_t slv_timer; // 0x002C + MSI_CONFIG_t msi_config; // 0x0030 + LOOPBACK_t loopback; // 0x0034 + u32 watchdog_timer; // 0x0038 +} GLOBAL_t, *PGLOBAL_t; + +/* END OF GLOBAL REGISTER ADDRESS MAP */ + + +/* START OF TXDMA REGISTER ADDRESS MAP */ + +/* + * structure for txdma control status reg in txdma address map + * located at address 0x1000 + */ +typedef union _TXDMA_CSR_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused2:19; // bits 13-31 + u32 traffic_class:4; // bits 9-12 + u32 sngl_epkt_mode:1; // bit 8 + u32 cache_thrshld:4; // bits 4-7 + u32 unused1:2; // bits 2-3 + u32 drop_TLP_disable:1; // bit 1 + u32 halt:1; // bit 0 +#else + u32 halt:1; // bit 0 + u32 drop_TLP_disable:1; // bit 1 + u32 unused1:2; // bits 2-3 + u32 cache_thrshld:4; // bits 4-7 + u32 sngl_epkt_mode:1; // bit 8 + u32 traffic_class:4; // bits 9-12 + u32 unused2:19; // bits 13-31 +#endif + } bits; +} TXDMA_CSR_t, *PTXDMA_CSR_t; + +/* + * structure for txdma packet ring base address hi reg in txdma address map + * located at address 0x1004 + * Defined earlier (u32) + */ + +/* + * structure for txdma packet ring base address low reg in txdma address map + * located at address 0x1008 + * Defined earlier (u32) + */ + +/* + * structure for txdma packet ring number of descriptor reg in txdma address + * map. Located at address 0x100C + */ +typedef union _TXDMA_PR_NUM_DES_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:22; // bits 10-31 + u32 pr_ndes:10; // bits 0-9 +#else + u32 pr_ndes:10; // bits 0-9 + u32 unused:22; // bits 10-31 +#endif + } bits; +} TXDMA_PR_NUM_DES_t, *PTXDMA_PR_NUM_DES_t; + + +typedef union _DMA10W_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:21; // bits 11-31 + u32 wrap:1; // bit 10 + u32 val:10; // bits 0-9 +#else + u32 val:10; // bits 0-9 + u32 wrap:1; // bit 10 + u32 unused:21; // bits 11-31 +#endif + } bits; +} DMA10W_t, *PDMA10W_t; + +/* + * structure for txdma tx queue write address reg in txdma address map + * located at address 0x1010 + * Defined earlier (DMA10W_t) + */ + +/* + * structure for txdma tx queue write address external reg in txdma address map + * located at address 0x1014 + * Defined earlier (DMA10W_t) + */ + +/* + * structure for txdma tx queue read address reg in txdma address map + * located at address 0x1018 + * Defined earlier (DMA10W_t) + */ + +/* + * structure for txdma status writeback address hi reg in txdma address map + * located at address 0x101C + * Defined earlier (u32) + */ + +/* + * structure for txdma status writeback address lo reg in txdma address map + * located at address 0x1020 + * Defined earlier (u32) + */ + +/* + * structure for txdma service request reg in txdma address map + * located at address 0x1024 + * Defined earlier (DMA10W_t) + */ + +/* + * structure for txdma service complete reg in txdma address map + * located at address 0x1028 + * Defined earlier (DMA10W_t) + */ + +typedef union _DMA4W_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:27; // bits 5-31 + u32 wrap:1; // bit 4 + u32 val:4; // bit 0-3 +#else + u32 val:4; // bits 0-3 + u32 wrap:1; // bit 4 + u32 unused:27; // bits 5-31 +#endif + } bits; +} DMA4W_t, *PDMA4W_t; + +/* + * structure for txdma tx descriptor cache read index reg in txdma address map + * located at address 0x102C + * Defined earlier (DMA4W_t) + */ + +/* + * structure for txdma tx descriptor cache write index reg in txdma address map + * located at address 0x1030 + * Defined earlier (DMA4W_t) + */ + +/* + * structure for txdma error reg in txdma address map + * located at address 0x1034 + */ +typedef union _TXDMA_ERROR_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused3:22; // bits 10-31 + u32 WrbkRewind:1; // bit 9 + u32 WrbkResend:1; // bit 8 + u32 unused2:2; // bits 6-7 + u32 DescrRewind:1; // bit 5 + u32 DescrResend:1; // bit 4 + u32 unused1:2; // bits 2-3 + u32 PyldRewind:1; // bit 1 + u32 PyldResend:1; // bit 0 +#else + u32 PyldResend:1; // bit 0 + u32 PyldRewind:1; // bit 1 + u32 unused1:2; // bits 2-3 + u32 DescrResend:1; // bit 4 + u32 DescrRewind:1; // bit 5 + u32 unused2:2; // bits 6-7 + u32 WrbkResend:1; // bit 8 + u32 WrbkRewind:1; // bit 9 + u32 unused3:22; // bits 10-31 +#endif + } bits; +} TXDMA_ERROR_t, *PTXDMA_ERROR_t; + +/* + * Tx DMA Module of JAGCore Address Mapping + * Located at address 0x1000 + */ +typedef struct _TXDMA_t { // Location: + TXDMA_CSR_t csr; // 0x1000 + u32 pr_base_hi; // 0x1004 + u32 pr_base_lo; // 0x1008 + TXDMA_PR_NUM_DES_t pr_num_des; // 0x100C + DMA10W_t txq_wr_addr; // 0x1010 + DMA10W_t txq_wr_addr_ext; // 0x1014 + DMA10W_t txq_rd_addr; // 0x1018 + u32 dma_wb_base_hi; // 0x101C + u32 dma_wb_base_lo; // 0x1020 + DMA10W_t service_request; // 0x1024 + DMA10W_t service_complete; // 0x1028 + DMA4W_t cache_rd_index; // 0x102C + DMA4W_t cache_wr_index; // 0x1030 + TXDMA_ERROR_t TxDmaError; // 0x1034 + u32 DescAbortCount; // 0x1038 + u32 PayloadAbortCnt; // 0x103c + u32 WriteBackAbortCnt; // 0x1040 + u32 DescTimeoutCnt; // 0x1044 + u32 PayloadTimeoutCnt; // 0x1048 + u32 WriteBackTimeoutCnt; // 0x104c + u32 DescErrorCount; // 0x1050 + u32 PayloadErrorCnt; // 0x1054 + u32 WriteBackErrorCnt; // 0x1058 + u32 DroppedTLPCount; // 0x105c + DMA10W_t NewServiceComplete; // 0x1060 + u32 EthernetPacketCount; // 0x1064 +} TXDMA_t, *PTXDMA_t; + +/* END OF TXDMA REGISTER ADDRESS MAP */ + + +/* START OF RXDMA REGISTER ADDRESS MAP */ + +/* + * structure for control status reg in rxdma address map + * Located at address 0x2000 + */ +typedef union _RXDMA_CSR_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused2:14; // bits 18-31 + u32 halt_status:1; // bit 17 + u32 pkt_done_flush:1; // bit 16 + u32 pkt_drop_disable:1; // bit 15 + u32 unused1:1; // bit 14 + u32 fbr1_enable:1; // bit 13 + u32 fbr1_size:2; // bits 11-12 + u32 fbr0_enable:1; // bit 10 + u32 fbr0_size:2; // bits 8-9 + u32 dma_big_endian:1; // bit 7 + u32 pkt_big_endian:1; // bit 6 + u32 psr_big_endian:1; // bit 5 + u32 fbr_big_endian:1; // bit 4 + u32 tc:3; // bits 1-3 + u32 halt:1; // bit 0 +#else + u32 halt:1; // bit 0 + u32 tc:3; // bits 1-3 + u32 fbr_big_endian:1; // bit 4 + u32 psr_big_endian:1; // bit 5 + u32 pkt_big_endian:1; // bit 6 + u32 dma_big_endian:1; // bit 7 + u32 fbr0_size:2; // bits 8-9 + u32 fbr0_enable:1; // bit 10 + u32 fbr1_size:2; // bits 11-12 + u32 fbr1_enable:1; // bit 13 + u32 unused1:1; // bit 14 + u32 pkt_drop_disable:1; // bit 15 + u32 pkt_done_flush:1; // bit 16 + u32 halt_status:1; // bit 17 + u32 unused2:14; // bits 18-31 +#endif + } bits; +} RXDMA_CSR_t, *PRXDMA_CSR_t; + +/* + * structure for dma writeback lo reg in rxdma address map + * located at address 0x2004 + * Defined earlier (u32) + */ + +/* + * structure for dma writeback hi reg in rxdma address map + * located at address 0x2008 + * Defined earlier (u32) + */ + +/* + * structure for number of packets done reg in rxdma address map + * located at address 0x200C + */ +typedef union _RXDMA_NUM_PKT_DONE_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:24; // bits 8-31 + u32 num_done:8; // bits 0-7 +#else + u32 num_done:8; // bits 0-7 + u32 unused:24; // bits 8-31 +#endif + } bits; +} RXDMA_NUM_PKT_DONE_t, *PRXDMA_NUM_PKT_DONE_t; + +/* + * structure for max packet time reg in rxdma address map + * located at address 0x2010 + */ +typedef union _RXDMA_MAX_PKT_TIME_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:14; // bits 18-31 + u32 time_done:18; // bits 0-17 +#else + u32 time_done:18; // bits 0-17 + u32 unused:14; // bits 18-31 +#endif + } bits; +} RXDMA_MAX_PKT_TIME_t, *PRXDMA_MAX_PKT_TIME_t; + +/* + * structure for rx queue read address reg in rxdma address map + * located at address 0x2014 + * Defined earlier (DMA10W_t) + */ + +/* + * structure for rx queue read address external reg in rxdma address map + * located at address 0x2018 + * Defined earlier (DMA10W_t) + */ + +/* + * structure for rx queue write address reg in rxdma address map + * located at address 0x201C + * Defined earlier (DMA10W_t) + */ + +/* + * structure for packet status ring base address lo reg in rxdma address map + * located at address 0x2020 + * Defined earlier (u32) + */ + +/* + * structure for packet status ring base address hi reg in rxdma address map + * located at address 0x2024 + * Defined earlier (u32) + */ + +/* + * structure for packet status ring number of descriptors reg in rxdma address + * map. Located at address 0x2028 + */ +typedef union _RXDMA_PSR_NUM_DES_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:20; // bits 12-31 + u32 psr_ndes:12; // bit 0-11 +#else + u32 psr_ndes:12; // bit 0-11 + u32 unused:20; // bits 12-31 +#endif + } bits; +} RXDMA_PSR_NUM_DES_t, *PRXDMA_PSR_NUM_DES_t; + +/* + * structure for packet status ring available offset reg in rxdma address map + * located at address 0x202C + */ +typedef union _RXDMA_PSR_AVAIL_OFFSET_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:19; // bits 13-31 + u32 psr_avail_wrap:1; // bit 12 + u32 psr_avail:12; // bit 0-11 +#else + u32 psr_avail:12; // bit 0-11 + u32 psr_avail_wrap:1; // bit 12 + u32 unused:19; // bits 13-31 +#endif + } bits; +} RXDMA_PSR_AVAIL_OFFSET_t, *PRXDMA_PSR_AVAIL_OFFSET_t; + +/* + * structure for packet status ring full offset reg in rxdma address map + * located at address 0x2030 + */ +typedef union _RXDMA_PSR_FULL_OFFSET_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:19; // bits 13-31 + u32 psr_full_wrap:1; // bit 12 + u32 psr_full:12; // bit 0-11 +#else + u32 psr_full:12; // bit 0-11 + u32 psr_full_wrap:1; // bit 12 + u32 unused:19; // bits 13-31 +#endif + } bits; +} RXDMA_PSR_FULL_OFFSET_t, *PRXDMA_PSR_FULL_OFFSET_t; + +/* + * structure for packet status ring access index reg in rxdma address map + * located at address 0x2034 + */ +typedef union _RXDMA_PSR_ACCESS_INDEX_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:27; // bits 5-31 + u32 psr_ai:5; // bits 0-4 +#else + u32 psr_ai:5; // bits 0-4 + u32 unused:27; // bits 5-31 +#endif + } bits; +} RXDMA_PSR_ACCESS_INDEX_t, *PRXDMA_PSR_ACCESS_INDEX_t; + +/* + * structure for packet status ring minimum descriptors reg in rxdma address + * map. Located at address 0x2038 + */ +typedef union _RXDMA_PSR_MIN_DES_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:20; // bits 12-31 + u32 psr_min:12; // bits 0-11 +#else + u32 psr_min:12; // bits 0-11 + u32 unused:20; // bits 12-31 +#endif + } bits; +} RXDMA_PSR_MIN_DES_t, *PRXDMA_PSR_MIN_DES_t; + +/* + * structure for free buffer ring base lo address reg in rxdma address map + * located at address 0x203C + * Defined earlier (u32) + */ + +/* + * structure for free buffer ring base hi address reg in rxdma address map + * located at address 0x2040 + * Defined earlier (u32) + */ + +/* + * structure for free buffer ring number of descriptors reg in rxdma address + * map. Located at address 0x2044 + */ +typedef union _RXDMA_FBR_NUM_DES_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:22; // bits 10-31 + u32 fbr_ndesc:10; // bits 0-9 +#else + u32 fbr_ndesc:10; // bits 0-9 + u32 unused:22; // bits 10-31 +#endif + } bits; +} RXDMA_FBR_NUM_DES_t, *PRXDMA_FBR_NUM_DES_t; + +/* + * structure for free buffer ring 0 available offset reg in rxdma address map + * located at address 0x2048 + * Defined earlier (DMA10W_t) + */ + +/* + * structure for free buffer ring 0 full offset reg in rxdma address map + * located at address 0x204C + * Defined earlier (DMA10W_t) + */ + +/* + * structure for free buffer cache 0 full offset reg in rxdma address map + * located at address 0x2050 + */ +typedef union _RXDMA_FBC_RD_INDEX_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:27; // bits 5-31 + u32 fbc_rdi:5; // bit 0-4 +#else + u32 fbc_rdi:5; // bit 0-4 + u32 unused:27; // bits 5-31 +#endif + } bits; +} RXDMA_FBC_RD_INDEX_t, *PRXDMA_FBC_RD_INDEX_t; + +/* + * structure for free buffer ring 0 minimum descriptor reg in rxdma address map + * located at address 0x2054 + */ +typedef union _RXDMA_FBR_MIN_DES_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:22; // bits 10-31 + u32 fbr_min:10; // bits 0-9 +#else + u32 fbr_min:10; // bits 0-9 + u32 unused:22; // bits 10-31 +#endif + } bits; +} RXDMA_FBR_MIN_DES_t, *PRXDMA_FBR_MIN_DES_t; + +/* + * structure for free buffer ring 1 base address lo reg in rxdma address map + * located at address 0x2058 - 0x205C + * Defined earlier (RXDMA_FBR_BASE_LO_t and RXDMA_FBR_BASE_HI_t) + */ + +/* + * structure for free buffer ring 1 number of descriptors reg in rxdma address + * map. Located at address 0x2060 + * Defined earlier (RXDMA_FBR_NUM_DES_t) + */ + +/* + * structure for free buffer ring 1 available offset reg in rxdma address map + * located at address 0x2064 + * Defined Earlier (RXDMA_FBR_AVAIL_OFFSET_t) + */ + +/* + * structure for free buffer ring 1 full offset reg in rxdma address map + * located at address 0x2068 + * Defined Earlier (RXDMA_FBR_FULL_OFFSET_t) + */ + +/* + * structure for free buffer cache 1 read index reg in rxdma address map + * located at address 0x206C + * Defined Earlier (RXDMA_FBC_RD_INDEX_t) + */ + +/* + * structure for free buffer ring 1 minimum descriptor reg in rxdma address map + * located at address 0x2070 + * Defined Earlier (RXDMA_FBR_MIN_DES_t) + */ + +/* + * Rx DMA Module of JAGCore Address Mapping + * Located at address 0x2000 + */ +typedef struct _RXDMA_t { // Location: + RXDMA_CSR_t csr; // 0x2000 + u32 dma_wb_base_lo; // 0x2004 + u32 dma_wb_base_hi; // 0x2008 + RXDMA_NUM_PKT_DONE_t num_pkt_done; // 0x200C + RXDMA_MAX_PKT_TIME_t max_pkt_time; // 0x2010 + DMA10W_t rxq_rd_addr; // 0x2014 + DMA10W_t rxq_rd_addr_ext; // 0x2018 + DMA10W_t rxq_wr_addr; // 0x201C + u32 psr_base_lo; // 0x2020 + u32 psr_base_hi; // 0x2024 + RXDMA_PSR_NUM_DES_t psr_num_des; // 0x2028 + RXDMA_PSR_AVAIL_OFFSET_t psr_avail_offset; // 0x202C + RXDMA_PSR_FULL_OFFSET_t psr_full_offset; // 0x2030 + RXDMA_PSR_ACCESS_INDEX_t psr_access_index; // 0x2034 + RXDMA_PSR_MIN_DES_t psr_min_des; // 0x2038 + u32 fbr0_base_lo; // 0x203C + u32 fbr0_base_hi; // 0x2040 + RXDMA_FBR_NUM_DES_t fbr0_num_des; // 0x2044 + DMA10W_t fbr0_avail_offset; // 0x2048 + DMA10W_t fbr0_full_offset; // 0x204C + RXDMA_FBC_RD_INDEX_t fbr0_rd_index; // 0x2050 + RXDMA_FBR_MIN_DES_t fbr0_min_des; // 0x2054 + u32 fbr1_base_lo; // 0x2058 + u32 fbr1_base_hi; // 0x205C + RXDMA_FBR_NUM_DES_t fbr1_num_des; // 0x2060 + DMA10W_t fbr1_avail_offset; // 0x2064 + DMA10W_t fbr1_full_offset; // 0x2068 + RXDMA_FBC_RD_INDEX_t fbr1_rd_index; // 0x206C + RXDMA_FBR_MIN_DES_t fbr1_min_des; // 0x2070 +} RXDMA_t, *PRXDMA_t; + +/* END OF RXDMA REGISTER ADDRESS MAP */ + + +/* START OF TXMAC REGISTER ADDRESS MAP */ + +/* + * structure for control reg in txmac address map + * located at address 0x3000 + */ +typedef union _TXMAC_CTL_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:24; // bits 8-31 + u32 cklseg_diable:1; // bit 7 + u32 ckbcnt_disable:1; // bit 6 + u32 cksegnum:1; // bit 5 + u32 async_disable:1; // bit 4 + u32 fc_disable:1; // bit 3 + u32 mcif_disable:1; // bit 2 + u32 mif_disable:1; // bit 1 + u32 txmac_en:1; // bit 0 +#else + u32 txmac_en:1; // bit 0 + u32 mif_disable:1; // bit 1 mac interface + u32 mcif_disable:1; // bit 2 mem. contr. interface + u32 fc_disable:1; // bit 3 + u32 async_disable:1; // bit 4 + u32 cksegnum:1; // bit 5 + u32 ckbcnt_disable:1; // bit 6 + u32 cklseg_diable:1; // bit 7 + u32 unused:24; // bits 8-31 +#endif + } bits; +} TXMAC_CTL_t, *PTXMAC_CTL_t; + +/* + * structure for shadow pointer reg in txmac address map + * located at address 0x3004 + */ +typedef union _TXMAC_SHADOW_PTR_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved2:5; // bits 27-31 + u32 txq_rd_ptr:11; // bits 16-26 + u32 reserved:5; // bits 11-15 + u32 txq_wr_ptr:11; // bits 0-10 +#else + u32 txq_wr_ptr:11; // bits 0-10 + u32 reserved:5; // bits 11-15 + u32 txq_rd_ptr:11; // bits 16-26 + u32 reserved2:5; // bits 27-31 +#endif + } bits; +} TXMAC_SHADOW_PTR_t, *PTXMAC_SHADOW_PTR_t; + +/* + * structure for error count reg in txmac address map + * located at address 0x3008 + */ +typedef union _TXMAC_ERR_CNT_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:20; // bits 12-31 + u32 reserved:4; // bits 8-11 + u32 txq_underrun:4; // bits 4-7 + u32 fifo_underrun:4; // bits 0-3 +#else + u32 fifo_underrun:4; // bits 0-3 + u32 txq_underrun:4; // bits 4-7 + u32 reserved:4; // bits 8-11 + u32 unused:20; // bits 12-31 +#endif + } bits; +} TXMAC_ERR_CNT_t, *PTXMAC_ERR_CNT_t; + +/* + * structure for max fill reg in txmac address map + * located at address 0x300C + */ +typedef union _TXMAC_MAX_FILL_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:20; // bits 12-31 + u32 max_fill:12; // bits 0-11 +#else + u32 max_fill:12; // bits 0-11 + u32 unused:20; // bits 12-31 +#endif + } bits; +} TXMAC_MAX_FILL_t, *PTXMAC_MAX_FILL_t; + +/* + * structure for cf parameter reg in txmac address map + * located at address 0x3010 + */ +typedef union _TXMAC_CF_PARAM_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 cfep:16; // bits 16-31 + u32 cfpt:16; // bits 0-15 +#else + u32 cfpt:16; // bits 0-15 + u32 cfep:16; // bits 16-31 +#endif + } bits; +} TXMAC_CF_PARAM_t, *PTXMAC_CF_PARAM_t; + +/* + * structure for tx test reg in txmac address map + * located at address 0x3014 + */ +typedef union _TXMAC_TXTEST_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused2:15; // bits 17-31 + u32 reserved1:1; // bit 16 + u32 txtest_en:1; // bit 15 + u32 unused1:4; // bits 11-14 + u32 txqtest_ptr:11; // bits 0-11 +#else + u32 txqtest_ptr:11; // bits 0-10 + u32 unused1:4; // bits 11-14 + u32 txtest_en:1; // bit 15 + u32 reserved1:1; // bit 16 + u32 unused2:15; // bits 17-31 +#endif + } bits; +} TXMAC_TXTEST_t, *PTXMAC_TXTEST_t; + +/* + * structure for error reg in txmac address map + * located at address 0x3018 + */ +typedef union _TXMAC_ERR_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused2:23; // bits 9-31 + u32 fifo_underrun:1; // bit 8 + u32 unused1:2; // bits 6-7 + u32 ctrl2_err:1; // bit 5 + u32 txq_underrun:1; // bit 4 + u32 bcnt_err:1; // bit 3 + u32 lseg_err:1; // bit 2 + u32 segnum_err:1; // bit 1 + u32 seg0_err:1; // bit 0 +#else + u32 seg0_err:1; // bit 0 + u32 segnum_err:1; // bit 1 + u32 lseg_err:1; // bit 2 + u32 bcnt_err:1; // bit 3 + u32 txq_underrun:1; // bit 4 + u32 ctrl2_err:1; // bit 5 + u32 unused1:2; // bits 6-7 + u32 fifo_underrun:1; // bit 8 + u32 unused2:23; // bits 9-31 +#endif + } bits; +} TXMAC_ERR_t, *PTXMAC_ERR_t; + +/* + * structure for error interrupt reg in txmac address map + * located at address 0x301C + */ +typedef union _TXMAC_ERR_INT_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused2:23; // bits 9-31 + u32 fifo_underrun:1; // bit 8 + u32 unused1:2; // bits 6-7 + u32 ctrl2_err:1; // bit 5 + u32 txq_underrun:1; // bit 4 + u32 bcnt_err:1; // bit 3 + u32 lseg_err:1; // bit 2 + u32 segnum_err:1; // bit 1 + u32 seg0_err:1; // bit 0 +#else + u32 seg0_err:1; // bit 0 + u32 segnum_err:1; // bit 1 + u32 lseg_err:1; // bit 2 + u32 bcnt_err:1; // bit 3 + u32 txq_underrun:1; // bit 4 + u32 ctrl2_err:1; // bit 5 + u32 unused1:2; // bits 6-7 + u32 fifo_underrun:1; // bit 8 + u32 unused2:23; // bits 9-31 +#endif + } bits; +} TXMAC_ERR_INT_t, *PTXMAC_ERR_INT_t; + +/* + * structure for error interrupt reg in txmac address map + * located at address 0x3020 + */ +typedef union _TXMAC_CP_CTRL_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:30; // bits 2-31 + u32 bp_req:1; // bit 1 + u32 bp_xonxoff:1; // bit 0 +#else + u32 bp_xonxoff:1; // bit 0 + u32 bp_req:1; // bit 1 + u32 unused:30; // bits 2-31 +#endif + } bits; +} TXMAC_BP_CTRL_t, *PTXMAC_BP_CTRL_t; + +/* + * Tx MAC Module of JAGCore Address Mapping + */ +typedef struct _TXMAC_t { // Location: + TXMAC_CTL_t ctl; // 0x3000 + TXMAC_SHADOW_PTR_t shadow_ptr; // 0x3004 + TXMAC_ERR_CNT_t err_cnt; // 0x3008 + TXMAC_MAX_FILL_t max_fill; // 0x300C + TXMAC_CF_PARAM_t cf_param; // 0x3010 + TXMAC_TXTEST_t tx_test; // 0x3014 + TXMAC_ERR_t err; // 0x3018 + TXMAC_ERR_INT_t err_int; // 0x301C + TXMAC_BP_CTRL_t bp_ctrl; // 0x3020 +} TXMAC_t, *PTXMAC_t; + +/* END OF TXMAC REGISTER ADDRESS MAP */ + +/* START OF RXMAC REGISTER ADDRESS MAP */ + +/* + * structure for rxmac control reg in rxmac address map + * located at address 0x4000 + */ +typedef union _RXMAC_CTRL_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved:25; // bits 7-31 + u32 rxmac_int_disable:1; // bit 6 + u32 async_disable:1; // bit 5 + u32 mif_disable:1; // bit 4 + u32 wol_disable:1; // bit 3 + u32 pkt_filter_disable:1; // bit 2 + u32 mcif_disable:1; // bit 1 + u32 rxmac_en:1; // bit 0 +#else + u32 rxmac_en:1; // bit 0 + u32 mcif_disable:1; // bit 1 + u32 pkt_filter_disable:1; // bit 2 + u32 wol_disable:1; // bit 3 + u32 mif_disable:1; // bit 4 + u32 async_disable:1; // bit 5 + u32 rxmac_int_disable:1; // bit 6 + u32 reserved:25; // bits 7-31 +#endif + } bits; +} RXMAC_CTRL_t, *PRXMAC_CTRL_t; + +/* + * structure for Wake On Lan Control and CRC 0 reg in rxmac address map + * located at address 0x4004 + */ +typedef union _RXMAC_WOL_CTL_CRC0_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 crc0:16; // bits 16-31 + u32 reserve:4; // bits 12-15 + u32 ignore_pp:1; // bit 11 + u32 ignore_mp:1; // bit 10 + u32 clr_intr:1; // bit 9 + u32 ignore_link_chg:1; // bit 8 + u32 ignore_uni:1; // bit 7 + u32 ignore_multi:1; // bit 6 + u32 ignore_broad:1; // bit 5 + u32 valid_crc4:1; // bit 4 + u32 valid_crc3:1; // bit 3 + u32 valid_crc2:1; // bit 2 + u32 valid_crc1:1; // bit 1 + u32 valid_crc0:1; // bit 0 +#else + u32 valid_crc0:1; // bit 0 + u32 valid_crc1:1; // bit 1 + u32 valid_crc2:1; // bit 2 + u32 valid_crc3:1; // bit 3 + u32 valid_crc4:1; // bit 4 + u32 ignore_broad:1; // bit 5 + u32 ignore_multi:1; // bit 6 + u32 ignore_uni:1; // bit 7 + u32 ignore_link_chg:1; // bit 8 + u32 clr_intr:1; // bit 9 + u32 ignore_mp:1; // bit 10 + u32 ignore_pp:1; // bit 11 + u32 reserve:4; // bits 12-15 + u32 crc0:16; // bits 16-31 +#endif + } bits; +} RXMAC_WOL_CTL_CRC0_t, *PRXMAC_WOL_CTL_CRC0_t; + +/* + * structure for CRC 1 and CRC 2 reg in rxmac address map + * located at address 0x4008 + */ +typedef union _RXMAC_WOL_CRC12_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 crc2:16; // bits 16-31 + u32 crc1:16; // bits 0-15 +#else + u32 crc1:16; // bits 0-15 + u32 crc2:16; // bits 16-31 +#endif + } bits; +} RXMAC_WOL_CRC12_t, *PRXMAC_WOL_CRC12_t; + +/* + * structure for CRC 3 and CRC 4 reg in rxmac address map + * located at address 0x400C + */ +typedef union _RXMAC_WOL_CRC34_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 crc4:16; // bits 16-31 + u32 crc3:16; // bits 0-15 +#else + u32 crc3:16; // bits 0-15 + u32 crc4:16; // bits 16-31 +#endif + } bits; +} RXMAC_WOL_CRC34_t, *PRXMAC_WOL_CRC34_t; + +/* + * structure for Wake On Lan Source Address Lo reg in rxmac address map + * located at address 0x4010 + */ +typedef union _RXMAC_WOL_SA_LO_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 sa3:8; // bits 24-31 + u32 sa4:8; // bits 16-23 + u32 sa5:8; // bits 8-15 + u32 sa6:8; // bits 0-7 +#else + u32 sa6:8; // bits 0-7 + u32 sa5:8; // bits 8-15 + u32 sa4:8; // bits 16-23 + u32 sa3:8; // bits 24-31 +#endif + } bits; +} RXMAC_WOL_SA_LO_t, *PRXMAC_WOL_SA_LO_t; + +/* + * structure for Wake On Lan Source Address Hi reg in rxmac address map + * located at address 0x4014 + */ +typedef union _RXMAC_WOL_SA_HI_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved:16; // bits 16-31 + u32 sa1:8; // bits 8-15 + u32 sa2:8; // bits 0-7 +#else + u32 sa2:8; // bits 0-7 + u32 sa1:8; // bits 8-15 + u32 reserved:16; // bits 16-31 +#endif + } bits; +} RXMAC_WOL_SA_HI_t, *PRXMAC_WOL_SA_HI_t; + +/* + * structure for Wake On Lan mask reg in rxmac address map + * located at address 0x4018 - 0x4064 + * Defined earlier (u32) + */ + +/* + * structure for Unicast Paket Filter Address 1 reg in rxmac address map + * located at address 0x4068 + */ +typedef union _RXMAC_UNI_PF_ADDR1_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 addr1_3:8; // bits 24-31 + u32 addr1_4:8; // bits 16-23 + u32 addr1_5:8; // bits 8-15 + u32 addr1_6:8; // bits 0-7 +#else + u32 addr1_6:8; // bits 0-7 + u32 addr1_5:8; // bits 8-15 + u32 addr1_4:8; // bits 16-23 + u32 addr1_3:8; // bits 24-31 +#endif + } bits; +} RXMAC_UNI_PF_ADDR1_t, *PRXMAC_UNI_PF_ADDR1_t; + +/* + * structure for Unicast Paket Filter Address 2 reg in rxmac address map + * located at address 0x406C + */ +typedef union _RXMAC_UNI_PF_ADDR2_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 addr2_3:8; // bits 24-31 + u32 addr2_4:8; // bits 16-23 + u32 addr2_5:8; // bits 8-15 + u32 addr2_6:8; // bits 0-7 +#else + u32 addr2_6:8; // bits 0-7 + u32 addr2_5:8; // bits 8-15 + u32 addr2_4:8; // bits 16-23 + u32 addr2_3:8; // bits 24-31 +#endif + } bits; +} RXMAC_UNI_PF_ADDR2_t, *PRXMAC_UNI_PF_ADDR2_t; + +/* + * structure for Unicast Paket Filter Address 1 & 2 reg in rxmac address map + * located at address 0x4070 + */ +typedef union _RXMAC_UNI_PF_ADDR3_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 addr2_1:8; // bits 24-31 + u32 addr2_2:8; // bits 16-23 + u32 addr1_1:8; // bits 8-15 + u32 addr1_2:8; // bits 0-7 +#else + u32 addr1_2:8; // bits 0-7 + u32 addr1_1:8; // bits 8-15 + u32 addr2_2:8; // bits 16-23 + u32 addr2_1:8; // bits 24-31 +#endif + } bits; +} RXMAC_UNI_PF_ADDR3_t, *PRXMAC_UNI_PF_ADDR3_t; + +/* + * structure for Multicast Hash reg in rxmac address map + * located at address 0x4074 - 0x4080 + * Defined earlier (u32) + */ + +/* + * structure for Packet Filter Control reg in rxmac address map + * located at address 0x4084 + */ +typedef union _RXMAC_PF_CTRL_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused2:9; // bits 23-31 + u32 min_pkt_size:7; // bits 16-22 + u32 unused1:12; // bits 4-15 + u32 filter_frag_en:1; // bit 3 + u32 filter_uni_en:1; // bit 2 + u32 filter_multi_en:1; // bit 1 + u32 filter_broad_en:1; // bit 0 +#else + u32 filter_broad_en:1; // bit 0 + u32 filter_multi_en:1; // bit 1 + u32 filter_uni_en:1; // bit 2 + u32 filter_frag_en:1; // bit 3 + u32 unused1:12; // bits 4-15 + u32 min_pkt_size:7; // bits 16-22 + u32 unused2:9; // bits 23-31 +#endif + } bits; +} RXMAC_PF_CTRL_t, *PRXMAC_PF_CTRL_t; + +/* + * structure for Memory Controller Interface Control Max Segment reg in rxmac + * address map. Located at address 0x4088 + */ +typedef union _RXMAC_MCIF_CTRL_MAX_SEG_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved:22; // bits 10-31 + u32 max_size:8; // bits 2-9 + u32 fc_en:1; // bit 1 + u32 seg_en:1; // bit 0 +#else + u32 seg_en:1; // bit 0 + u32 fc_en:1; // bit 1 + u32 max_size:8; // bits 2-9 + u32 reserved:22; // bits 10-31 +#endif + } bits; +} RXMAC_MCIF_CTRL_MAX_SEG_t, *PRXMAC_MCIF_CTRL_MAX_SEG_t; + +/* + * structure for Memory Controller Interface Water Mark reg in rxmac address + * map. Located at address 0x408C + */ +typedef union _RXMAC_MCIF_WATER_MARK_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved2:6; // bits 26-31 + u32 mark_hi:10; // bits 16-25 + u32 reserved1:6; // bits 10-15 + u32 mark_lo:10; // bits 0-9 +#else + u32 mark_lo:10; // bits 0-9 + u32 reserved1:6; // bits 10-15 + u32 mark_hi:10; // bits 16-25 + u32 reserved2:6; // bits 26-31 +#endif + } bits; +} RXMAC_MCIF_WATER_MARK_t, *PRXMAC_MCIF_WATER_MARK_t; + +/* + * structure for Rx Queue Dialog reg in rxmac address map. + * located at address 0x4090 + */ +typedef union _RXMAC_RXQ_DIAG_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved2:6; // bits 26-31 + u32 rd_ptr:10; // bits 16-25 + u32 reserved1:6; // bits 10-15 + u32 wr_ptr:10; // bits 0-9 +#else + u32 wr_ptr:10; // bits 0-9 + u32 reserved1:6; // bits 10-15 + u32 rd_ptr:10; // bits 16-25 + u32 reserved2:6; // bits 26-31 +#endif + } bits; +} RXMAC_RXQ_DIAG_t, *PRXMAC_RXQ_DIAG_t; + +/* + * structure for space availiable reg in rxmac address map. + * located at address 0x4094 + */ +typedef union _RXMAC_SPACE_AVAIL_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved2:15; // bits 17-31 + u32 space_avail_en:1; // bit 16 + u32 reserved1:6; // bits 10-15 + u32 space_avail:10; // bits 0-9 +#else + u32 space_avail:10; // bits 0-9 + u32 reserved1:6; // bits 10-15 + u32 space_avail_en:1; // bit 16 + u32 reserved2:15; // bits 17-31 +#endif + } bits; +} RXMAC_SPACE_AVAIL_t, *PRXMAC_SPACE_AVAIL_t; + +/* + * structure for management interface reg in rxmac address map. + * located at address 0x4098 + */ +typedef union _RXMAC_MIF_CTL_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserve:14; // bits 18-31 + u32 drop_pkt_en:1; // bit 17 + u32 drop_pkt_mask:17; // bits 0-16 +#else + u32 drop_pkt_mask:17; // bits 0-16 + u32 drop_pkt_en:1; // bit 17 + u32 reserve:14; // bits 18-31 +#endif + } bits; +} RXMAC_MIF_CTL_t, *PRXMAC_MIF_CTL_t; + +/* + * structure for Error reg in rxmac address map. + * located at address 0x409C + */ +typedef union _RXMAC_ERROR_REG_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserve:28; // bits 4-31 + u32 mif:1; // bit 3 + u32 async:1; // bit 2 + u32 pkt_filter:1; // bit 1 + u32 mcif:1; // bit 0 +#else + u32 mcif:1; // bit 0 + u32 pkt_filter:1; // bit 1 + u32 async:1; // bit 2 + u32 mif:1; // bit 3 + u32 reserve:28; // bits 4-31 +#endif + } bits; +} RXMAC_ERROR_REG_t, *PRXMAC_ERROR_REG_t; + +/* + * Rx MAC Module of JAGCore Address Mapping + */ +typedef struct _RXMAC_t { // Location: + RXMAC_CTRL_t ctrl; // 0x4000 + RXMAC_WOL_CTL_CRC0_t crc0; // 0x4004 + RXMAC_WOL_CRC12_t crc12; // 0x4008 + RXMAC_WOL_CRC34_t crc34; // 0x400C + RXMAC_WOL_SA_LO_t sa_lo; // 0x4010 + RXMAC_WOL_SA_HI_t sa_hi; // 0x4014 + u32 mask0_word0; // 0x4018 + u32 mask0_word1; // 0x401C + u32 mask0_word2; // 0x4020 + u32 mask0_word3; // 0x4024 + u32 mask1_word0; // 0x4028 + u32 mask1_word1; // 0x402C + u32 mask1_word2; // 0x4030 + u32 mask1_word3; // 0x4034 + u32 mask2_word0; // 0x4038 + u32 mask2_word1; // 0x403C + u32 mask2_word2; // 0x4040 + u32 mask2_word3; // 0x4044 + u32 mask3_word0; // 0x4048 + u32 mask3_word1; // 0x404C + u32 mask3_word2; // 0x4050 + u32 mask3_word3; // 0x4054 + u32 mask4_word0; // 0x4058 + u32 mask4_word1; // 0x405C + u32 mask4_word2; // 0x4060 + u32 mask4_word3; // 0x4064 + RXMAC_UNI_PF_ADDR1_t uni_pf_addr1; // 0x4068 + RXMAC_UNI_PF_ADDR2_t uni_pf_addr2; // 0x406C + RXMAC_UNI_PF_ADDR3_t uni_pf_addr3; // 0x4070 + u32 multi_hash1; // 0x4074 + u32 multi_hash2; // 0x4078 + u32 multi_hash3; // 0x407C + u32 multi_hash4; // 0x4080 + RXMAC_PF_CTRL_t pf_ctrl; // 0x4084 + RXMAC_MCIF_CTRL_MAX_SEG_t mcif_ctrl_max_seg; // 0x4088 + RXMAC_MCIF_WATER_MARK_t mcif_water_mark; // 0x408C + RXMAC_RXQ_DIAG_t rxq_diag; // 0x4090 + RXMAC_SPACE_AVAIL_t space_avail; // 0x4094 + + RXMAC_MIF_CTL_t mif_ctrl; // 0x4098 + RXMAC_ERROR_REG_t err_reg; // 0x409C +} RXMAC_t, *PRXMAC_t; + +/* END OF TXMAC REGISTER ADDRESS MAP */ + + +/* START OF MAC REGISTER ADDRESS MAP */ + +/* + * structure for configuration #1 reg in mac address map. + * located at address 0x5000 + */ +typedef union _MAC_CFG1_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 soft_reset:1; // bit 31 + u32 sim_reset:1; // bit 30 + u32 reserved3:10; // bits 20-29 + u32 reset_rx_mc:1; // bit 19 + u32 reset_tx_mc:1; // bit 18 + u32 reset_rx_fun:1; // bit 17 + u32 reset_tx_fun:1; // bit 16 + u32 reserved2:7; // bits 9-15 + u32 loop_back:1; // bit 8 + u32 reserved1:2; // bits 6-7 + u32 rx_flow:1; // bit 5 + u32 tx_flow:1; // bit 4 + u32 syncd_rx_en:1; // bit 3 + u32 rx_enable:1; // bit 2 + u32 syncd_tx_en:1; // bit 1 + u32 tx_enable:1; // bit 0 +#else + u32 tx_enable:1; // bit 0 + u32 syncd_tx_en:1; // bit 1 + u32 rx_enable:1; // bit 2 + u32 syncd_rx_en:1; // bit 3 + u32 tx_flow:1; // bit 4 + u32 rx_flow:1; // bit 5 + u32 reserved1:2; // bits 6-7 + u32 loop_back:1; // bit 8 + u32 reserved2:7; // bits 9-15 + u32 reset_tx_fun:1; // bit 16 + u32 reset_rx_fun:1; // bit 17 + u32 reset_tx_mc:1; // bit 18 + u32 reset_rx_mc:1; // bit 19 + u32 reserved3:10; // bits 20-29 + u32 sim_reset:1; // bit 30 + u32 soft_reset:1; // bit 31 +#endif + } bits; +} MAC_CFG1_t, *PMAC_CFG1_t; + +/* + * structure for configuration #2 reg in mac address map. + * located at address 0x5004 + */ +typedef union _MAC_CFG2_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved3:16; // bits 16-31 + u32 preamble_len:4; // bits 12-15 + u32 reserved2:2; // bits 10-11 + u32 if_mode:2; // bits 8-9 + u32 reserved1:2; // bits 6-7 + u32 huge_frame:1; // bit 5 + u32 len_check:1; // bit 4 + u32 undefined:1; // bit 3 + u32 pad_crc:1; // bit 2 + u32 crc_enable:1; // bit 1 + u32 full_duplex:1; // bit 0 +#else + u32 full_duplex:1; // bit 0 + u32 crc_enable:1; // bit 1 + u32 pad_crc:1; // bit 2 + u32 undefined:1; // bit 3 + u32 len_check:1; // bit 4 + u32 huge_frame:1; // bit 5 + u32 reserved1:2; // bits 6-7 + u32 if_mode:2; // bits 8-9 + u32 reserved2:2; // bits 10-11 + u32 preamble_len:4; // bits 12-15 + u32 reserved3:16; // bits 16-31 +#endif + } bits; +} MAC_CFG2_t, *PMAC_CFG2_t; + +/* + * structure for Interpacket gap reg in mac address map. + * located at address 0x5008 + */ +typedef union _MAC_IPG_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved:1; // bit 31 + u32 non_B2B_ipg_1:7; // bits 24-30 + u32 undefined2:1; // bit 23 + u32 non_B2B_ipg_2:7; // bits 16-22 + u32 min_ifg_enforce:8; // bits 8-15 + u32 undefined1:1; // bit 7 + u32 B2B_ipg:7; // bits 0-6 +#else + u32 B2B_ipg:7; // bits 0-6 + u32 undefined1:1; // bit 7 + u32 min_ifg_enforce:8; // bits 8-15 + u32 non_B2B_ipg_2:7; // bits 16-22 + u32 undefined2:1; // bit 23 + u32 non_B2B_ipg_1:7; // bits 24-30 + u32 reserved:1; // bit 31 +#endif + } bits; +} MAC_IPG_t, *PMAC_IPG_t; + +/* + * structure for half duplex reg in mac address map. + * located at address 0x500C + */ +typedef union _MAC_HFDP_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved2:8; // bits 24-31 + u32 alt_beb_trunc:4; // bits 23-20 + u32 alt_beb_enable:1; // bit 19 + u32 bp_no_backoff:1; // bit 18 + u32 no_backoff:1; // bit 17 + u32 excess_defer:1; // bit 16 + u32 rexmit_max:4; // bits 12-15 + u32 reserved1:2; // bits 10-11 + u32 coll_window:10; // bits 0-9 +#else + u32 coll_window:10; // bits 0-9 + u32 reserved1:2; // bits 10-11 + u32 rexmit_max:4; // bits 12-15 + u32 excess_defer:1; // bit 16 + u32 no_backoff:1; // bit 17 + u32 bp_no_backoff:1; // bit 18 + u32 alt_beb_enable:1; // bit 19 + u32 alt_beb_trunc:4; // bits 23-20 + u32 reserved2:8; // bits 24-31 +#endif + } bits; +} MAC_HFDP_t, *PMAC_HFDP_t; + +/* + * structure for Maximum Frame Length reg in mac address map. + * located at address 0x5010 + */ +typedef union _MAC_MAX_FM_LEN_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved:16; // bits 16-31 + u32 max_len:16; // bits 0-15 +#else + u32 max_len:16; // bits 0-15 + u32 reserved:16; // bits 16-31 +#endif + } bits; +} MAC_MAX_FM_LEN_t, *PMAC_MAX_FM_LEN_t; + +/* + * structure for Reserve 1 reg in mac address map. + * located at address 0x5014 - 0x5018 + * Defined earlier (u32) + */ + +/* + * structure for Test reg in mac address map. + * located at address 0x501C + */ +typedef union _MAC_TEST_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:29; // bits 3-31 + u32 mac_test:3; // bits 0-2 +#else + u32 mac_test:3; // bits 0-2 + u32 unused:29; // bits 3-31 +#endif + } bits; +} MAC_TEST_t, *PMAC_TEST_t; + +/* + * structure for MII Management Configuration reg in mac address map. + * located at address 0x5020 + */ +typedef union _MII_MGMT_CFG_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reset_mii_mgmt:1; // bit 31 + u32 reserved:25; // bits 6-30 + u32 scan_auto_incremt:1; // bit 5 + u32 preamble_suppress:1; // bit 4 + u32 undefined:1; // bit 3 + u32 mgmt_clk_reset:3; // bits 0-2 +#else + u32 mgmt_clk_reset:3; // bits 0-2 + u32 undefined:1; // bit 3 + u32 preamble_suppress:1; // bit 4 + u32 scan_auto_incremt:1; // bit 5 + u32 reserved:25; // bits 6-30 + u32 reset_mii_mgmt:1; // bit 31 +#endif + } bits; +} MII_MGMT_CFG_t, *PMII_MGMT_CFG_t; + +/* + * structure for MII Management Command reg in mac address map. + * located at address 0x5024 + */ +typedef union _MII_MGMT_CMD_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved:30; // bits 2-31 + u32 scan_cycle:1; // bit 1 + u32 read_cycle:1; // bit 0 +#else + u32 read_cycle:1; // bit 0 + u32 scan_cycle:1; // bit 1 + u32 reserved:30; // bits 2-31 +#endif + } bits; +} MII_MGMT_CMD_t, *PMII_MGMT_CMD_t; + +/* + * structure for MII Management Address reg in mac address map. + * located at address 0x5028 + */ +typedef union _MII_MGMT_ADDR_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved2:19; // bit 13-31 + u32 phy_addr:5; // bits 8-12 + u32 reserved1:3; // bits 5-7 + u32 reg_addr:5; // bits 0-4 +#else + u32 reg_addr:5; // bits 0-4 + u32 reserved1:3; // bits 5-7 + u32 phy_addr:5; // bits 8-12 + u32 reserved2:19; // bit 13-31 +#endif + } bits; +} MII_MGMT_ADDR_t, *PMII_MGMT_ADDR_t; + +/* + * structure for MII Management Control reg in mac address map. + * located at address 0x502C + */ +typedef union _MII_MGMT_CTRL_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved:16; // bits 16-31 + u32 phy_ctrl:16; // bits 0-15 +#else + u32 phy_ctrl:16; // bits 0-15 + u32 reserved:16; // bits 16-31 +#endif + } bits; +} MII_MGMT_CTRL_t, *PMII_MGMT_CTRL_t; + +/* + * structure for MII Management Status reg in mac address map. + * located at address 0x5030 + */ +typedef union _MII_MGMT_STAT_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved:16; // bits 16-31 + u32 phy_stat:16; // bits 0-15 +#else + u32 phy_stat:16; // bits 0-15 + u32 reserved:16; // bits 16-31 +#endif + } bits; +} MII_MGMT_STAT_t, *PMII_MGMT_STAT_t; + +/* + * structure for MII Management Indicators reg in mac address map. + * located at address 0x5034 + */ +typedef union _MII_MGMT_INDICATOR_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved:29; // bits 3-31 + u32 not_valid:1; // bit 2 + u32 scanning:1; // bit 1 + u32 busy:1; // bit 0 +#else + u32 busy:1; // bit 0 + u32 scanning:1; // bit 1 + u32 not_valid:1; // bit 2 + u32 reserved:29; // bits 3-31 +#endif + } bits; +} MII_MGMT_INDICATOR_t, *PMII_MGMT_INDICATOR_t; + +/* + * structure for Interface Control reg in mac address map. + * located at address 0x5038 + */ +typedef union _MAC_IF_CTRL_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reset_if_module:1; // bit 31 + u32 reserved4:3; // bit 28-30 + u32 tbi_mode:1; // bit 27 + u32 ghd_mode:1; // bit 26 + u32 lhd_mode:1; // bit 25 + u32 phy_mode:1; // bit 24 + u32 reset_per_mii:1; // bit 23 + u32 reserved3:6; // bits 17-22 + u32 speed:1; // bit 16 + u32 reset_pe100x:1; // bit 15 + u32 reserved2:4; // bits 11-14 + u32 force_quiet:1; // bit 10 + u32 no_cipher:1; // bit 9 + u32 disable_link_fail:1; // bit 8 + u32 reset_gpsi:1; // bit 7 + u32 reserved1:6; // bits 1-6 + u32 enab_jab_protect:1; // bit 0 +#else + u32 enab_jab_protect:1; // bit 0 + u32 reserved1:6; // bits 1-6 + u32 reset_gpsi:1; // bit 7 + u32 disable_link_fail:1; // bit 8 + u32 no_cipher:1; // bit 9 + u32 force_quiet:1; // bit 10 + u32 reserved2:4; // bits 11-14 + u32 reset_pe100x:1; // bit 15 + u32 speed:1; // bit 16 + u32 reserved3:6; // bits 17-22 + u32 reset_per_mii:1; // bit 23 + u32 phy_mode:1; // bit 24 + u32 lhd_mode:1; // bit 25 + u32 ghd_mode:1; // bit 26 + u32 tbi_mode:1; // bit 27 + u32 reserved4:3; // bit 28-30 + u32 reset_if_module:1; // bit 31 +#endif + } bits; +} MAC_IF_CTRL_t, *PMAC_IF_CTRL_t; + +/* + * structure for Interface Status reg in mac address map. + * located at address 0x503C + */ +typedef union _MAC_IF_STAT_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved:22; // bits 10-31 + u32 excess_defer:1; // bit 9 + u32 clash:1; // bit 8 + u32 phy_jabber:1; // bit 7 + u32 phy_link_ok:1; // bit 6 + u32 phy_full_duplex:1; // bit 5 + u32 phy_speed:1; // bit 4 + u32 pe100x_link_fail:1; // bit 3 + u32 pe10t_loss_carrie:1; // bit 2 + u32 pe10t_sqe_error:1; // bit 1 + u32 pe10t_jabber:1; // bit 0 +#else + u32 pe10t_jabber:1; // bit 0 + u32 pe10t_sqe_error:1; // bit 1 + u32 pe10t_loss_carrie:1; // bit 2 + u32 pe100x_link_fail:1; // bit 3 + u32 phy_speed:1; // bit 4 + u32 phy_full_duplex:1; // bit 5 + u32 phy_link_ok:1; // bit 6 + u32 phy_jabber:1; // bit 7 + u32 clash:1; // bit 8 + u32 excess_defer:1; // bit 9 + u32 reserved:22; // bits 10-31 +#endif + } bits; +} MAC_IF_STAT_t, *PMAC_IF_STAT_t; + +/* + * structure for Mac Station Address, Part 1 reg in mac address map. + * located at address 0x5040 + */ +typedef union _MAC_STATION_ADDR1_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 Octet6:8; // bits 24-31 + u32 Octet5:8; // bits 16-23 + u32 Octet4:8; // bits 8-15 + u32 Octet3:8; // bits 0-7 +#else + u32 Octet3:8; // bits 0-7 + u32 Octet4:8; // bits 8-15 + u32 Octet5:8; // bits 16-23 + u32 Octet6:8; // bits 24-31 +#endif + } bits; +} MAC_STATION_ADDR1_t, *PMAC_STATION_ADDR1_t; + +/* + * structure for Mac Station Address, Part 2 reg in mac address map. + * located at address 0x5044 + */ +typedef union _MAC_STATION_ADDR2_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 Octet2:8; // bits 24-31 + u32 Octet1:8; // bits 16-23 + u32 reserved:16; // bits 0-15 +#else + u32 reserved:16; // bit 0-15 + u32 Octet1:8; // bits 16-23 + u32 Octet2:8; // bits 24-31 +#endif + } bits; +} MAC_STATION_ADDR2_t, *PMAC_STATION_ADDR2_t; + +/* + * MAC Module of JAGCore Address Mapping + */ +typedef struct _MAC_t { // Location: + MAC_CFG1_t cfg1; // 0x5000 + MAC_CFG2_t cfg2; // 0x5004 + MAC_IPG_t ipg; // 0x5008 + MAC_HFDP_t hfdp; // 0x500C + MAC_MAX_FM_LEN_t max_fm_len; // 0x5010 + u32 rsv1; // 0x5014 + u32 rsv2; // 0x5018 + MAC_TEST_t mac_test; // 0x501C + MII_MGMT_CFG_t mii_mgmt_cfg; // 0x5020 + MII_MGMT_CMD_t mii_mgmt_cmd; // 0x5024 + MII_MGMT_ADDR_t mii_mgmt_addr; // 0x5028 + MII_MGMT_CTRL_t mii_mgmt_ctrl; // 0x502C + MII_MGMT_STAT_t mii_mgmt_stat; // 0x5030 + MII_MGMT_INDICATOR_t mii_mgmt_indicator; // 0x5034 + MAC_IF_CTRL_t if_ctrl; // 0x5038 + MAC_IF_STAT_t if_stat; // 0x503C + MAC_STATION_ADDR1_t station_addr_1; // 0x5040 + MAC_STATION_ADDR2_t station_addr_2; // 0x5044 +} MAC_t, *PMAC_t; + +/* END OF MAC REGISTER ADDRESS MAP */ + +/* START OF MAC STAT REGISTER ADDRESS MAP */ + +/* + * structure for Carry Register One and it's Mask Register reg located in mac + * stat address map address 0x6130 and 0x6138. + */ +typedef union _MAC_STAT_REG_1_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 tr64:1; // bit 31 + u32 tr127:1; // bit 30 + u32 tr255:1; // bit 29 + u32 tr511:1; // bit 28 + u32 tr1k:1; // bit 27 + u32 trmax:1; // bit 26 + u32 trmgv:1; // bit 25 + u32 unused:8; // bits 17-24 + u32 rbyt:1; // bit 16 + u32 rpkt:1; // bit 15 + u32 rfcs:1; // bit 14 + u32 rmca:1; // bit 13 + u32 rbca:1; // bit 12 + u32 rxcf:1; // bit 11 + u32 rxpf:1; // bit 10 + u32 rxuo:1; // bit 9 + u32 raln:1; // bit 8 + u32 rflr:1; // bit 7 + u32 rcde:1; // bit 6 + u32 rcse:1; // bit 5 + u32 rund:1; // bit 4 + u32 rovr:1; // bit 3 + u32 rfrg:1; // bit 2 + u32 rjbr:1; // bit 1 + u32 rdrp:1; // bit 0 +#else + u32 rdrp:1; // bit 0 + u32 rjbr:1; // bit 1 + u32 rfrg:1; // bit 2 + u32 rovr:1; // bit 3 + u32 rund:1; // bit 4 + u32 rcse:1; // bit 5 + u32 rcde:1; // bit 6 + u32 rflr:1; // bit 7 + u32 raln:1; // bit 8 + u32 rxuo:1; // bit 9 + u32 rxpf:1; // bit 10 + u32 rxcf:1; // bit 11 + u32 rbca:1; // bit 12 + u32 rmca:1; // bit 13 + u32 rfcs:1; // bit 14 + u32 rpkt:1; // bit 15 + u32 rbyt:1; // bit 16 + u32 unused:8; // bits 17-24 + u32 trmgv:1; // bit 25 + u32 trmax:1; // bit 26 + u32 tr1k:1; // bit 27 + u32 tr511:1; // bit 28 + u32 tr255:1; // bit 29 + u32 tr127:1; // bit 30 + u32 tr64:1; // bit 31 +#endif + } bits; +} MAC_STAT_REG_1_t, *PMAC_STAT_REG_1_t; + +/* + * structure for Carry Register Two Mask Register reg in mac stat address map. + * located at address 0x613C + */ +typedef union _MAC_STAT_REG_2_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:12; // bit 20-31 + u32 tjbr:1; // bit 19 + u32 tfcs:1; // bit 18 + u32 txcf:1; // bit 17 + u32 tovr:1; // bit 16 + u32 tund:1; // bit 15 + u32 tfrg:1; // bit 14 + u32 tbyt:1; // bit 13 + u32 tpkt:1; // bit 12 + u32 tmca:1; // bit 11 + u32 tbca:1; // bit 10 + u32 txpf:1; // bit 9 + u32 tdfr:1; // bit 8 + u32 tedf:1; // bit 7 + u32 tscl:1; // bit 6 + u32 tmcl:1; // bit 5 + u32 tlcl:1; // bit 4 + u32 txcl:1; // bit 3 + u32 tncl:1; // bit 2 + u32 tpfh:1; // bit 1 + u32 tdrp:1; // bit 0 +#else + u32 tdrp:1; // bit 0 + u32 tpfh:1; // bit 1 + u32 tncl:1; // bit 2 + u32 txcl:1; // bit 3 + u32 tlcl:1; // bit 4 + u32 tmcl:1; // bit 5 + u32 tscl:1; // bit 6 + u32 tedf:1; // bit 7 + u32 tdfr:1; // bit 8 + u32 txpf:1; // bit 9 + u32 tbca:1; // bit 10 + u32 tmca:1; // bit 11 + u32 tpkt:1; // bit 12 + u32 tbyt:1; // bit 13 + u32 tfrg:1; // bit 14 + u32 tund:1; // bit 15 + u32 tovr:1; // bit 16 + u32 txcf:1; // bit 17 + u32 tfcs:1; // bit 18 + u32 tjbr:1; // bit 19 + u32 unused:12; // bit 20-31 +#endif + } bits; +} MAC_STAT_REG_2_t, *PMAC_STAT_REG_2_t; + +/* + * MAC STATS Module of JAGCore Address Mapping + */ +typedef struct _MAC_STAT_t { // Location: + u32 pad[32]; // 0x6000 - 607C + + // Tx/Rx 0-64 Byte Frame Counter + u32 TR64; // 0x6080 + + // Tx/Rx 65-127 Byte Frame Counter + u32 TR127; // 0x6084 + + // Tx/Rx 128-255 Byte Frame Counter + u32 TR255; // 0x6088 + + // Tx/Rx 256-511 Byte Frame Counter + u32 TR511; // 0x608C + + // Tx/Rx 512-1023 Byte Frame Counter + u32 TR1K; // 0x6090 + + // Tx/Rx 1024-1518 Byte Frame Counter + u32 TRMax; // 0x6094 + + // Tx/Rx 1519-1522 Byte Good VLAN Frame Count + u32 TRMgv; // 0x6098 + + // Rx Byte Counter + u32 RByt; // 0x609C + + // Rx Packet Counter + u32 RPkt; // 0x60A0 + + // Rx FCS Error Counter + u32 RFcs; // 0x60A4 + + // Rx Multicast Packet Counter + u32 RMca; // 0x60A8 + + // Rx Broadcast Packet Counter + u32 RBca; // 0x60AC + + // Rx Control Frame Packet Counter + u32 RxCf; // 0x60B0 + + // Rx Pause Frame Packet Counter + u32 RxPf; // 0x60B4 + + // Rx Unknown OP Code Counter + u32 RxUo; // 0x60B8 + + // Rx Alignment Error Counter + u32 RAln; // 0x60BC + + // Rx Frame Length Error Counter + u32 RFlr; // 0x60C0 + + // Rx Code Error Counter + u32 RCde; // 0x60C4 + + // Rx Carrier Sense Error Counter + u32 RCse; // 0x60C8 + + // Rx Undersize Packet Counter + u32 RUnd; // 0x60CC + + // Rx Oversize Packet Counter + u32 ROvr; // 0x60D0 + + // Rx Fragment Counter + u32 RFrg; // 0x60D4 + + // Rx Jabber Counter + u32 RJbr; // 0x60D8 + + // Rx Drop + u32 RDrp; // 0x60DC + + // Tx Byte Counter + u32 TByt; // 0x60E0 + + // Tx Packet Counter + u32 TPkt; // 0x60E4 + + // Tx Multicast Packet Counter + u32 TMca; // 0x60E8 + + // Tx Broadcast Packet Counter + u32 TBca; // 0x60EC + + // Tx Pause Control Frame Counter + u32 TxPf; // 0x60F0 + + // Tx Deferral Packet Counter + u32 TDfr; // 0x60F4 + + // Tx Excessive Deferral Packet Counter + u32 TEdf; // 0x60F8 + + // Tx Single Collision Packet Counter + u32 TScl; // 0x60FC + + // Tx Multiple Collision Packet Counter + u32 TMcl; // 0x6100 + + // Tx Late Collision Packet Counter + u32 TLcl; // 0x6104 + + // Tx Excessive Collision Packet Counter + u32 TXcl; // 0x6108 + + // Tx Total Collision Packet Counter + u32 TNcl; // 0x610C + + // Tx Pause Frame Honored Counter + u32 TPfh; // 0x6110 + + // Tx Drop Frame Counter + u32 TDrp; // 0x6114 + + // Tx Jabber Frame Counter + u32 TJbr; // 0x6118 + + // Tx FCS Error Counter + u32 TFcs; // 0x611C + + // Tx Control Frame Counter + u32 TxCf; // 0x6120 + + // Tx Oversize Frame Counter + u32 TOvr; // 0x6124 + + // Tx Undersize Frame Counter + u32 TUnd; // 0x6128 + + // Tx Fragments Frame Counter + u32 TFrg; // 0x612C + + // Carry Register One Register + MAC_STAT_REG_1_t Carry1; // 0x6130 + + // Carry Register Two Register + MAC_STAT_REG_2_t Carry2; // 0x6134 + + // Carry Register One Mask Register + MAC_STAT_REG_1_t Carry1M; // 0x6138 + + // Carry Register Two Mask Register + MAC_STAT_REG_2_t Carry2M; // 0x613C +} MAC_STAT_t, *PMAC_STAT_t; + +/* END OF MAC STAT REGISTER ADDRESS MAP */ + + +/* START OF MMC REGISTER ADDRESS MAP */ + +/* + * structure for Main Memory Controller Control reg in mmc address map. + * located at address 0x7000 + */ +typedef union _MMC_CTRL_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved:25; // bits 7-31 + u32 force_ce:1; // bit 6 + u32 rxdma_disable:1; // bit 5 + u32 txdma_disable:1; // bit 4 + u32 txmac_disable:1; // bit 3 + u32 rxmac_disable:1; // bit 2 + u32 arb_disable:1; // bit 1 + u32 mmc_enable:1; // bit 0 +#else + u32 mmc_enable:1; // bit 0 + u32 arb_disable:1; // bit 1 + u32 rxmac_disable:1; // bit 2 + u32 txmac_disable:1; // bit 3 + u32 txdma_disable:1; // bit 4 + u32 rxdma_disable:1; // bit 5 + u32 force_ce:1; // bit 6 + u32 reserved:25; // bits 7-31 +#endif + } bits; +} MMC_CTRL_t, *PMMC_CTRL_t; + +/* + * structure for Main Memory Controller Host Memory Access Address reg in mmc + * address map. Located at address 0x7004 + */ +typedef union _MMC_SRAM_ACCESS_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 byte_enable:16; // bits 16-31 + u32 reserved2:2; // bits 14-15 + u32 req_addr:10; // bits 4-13 + u32 reserved1:1; // bit 3 + u32 is_ctrl_word:1; // bit 2 + u32 wr_access:1; // bit 1 + u32 req_access:1; // bit 0 +#else + u32 req_access:1; // bit 0 + u32 wr_access:1; // bit 1 + u32 is_ctrl_word:1; // bit 2 + u32 reserved1:1; // bit 3 + u32 req_addr:10; // bits 4-13 + u32 reserved2:2; // bits 14-15 + u32 byte_enable:16; // bits 16-31 +#endif + } bits; +} MMC_SRAM_ACCESS_t, *PMMC_SRAM_ACCESS_t; + +/* + * structure for Main Memory Controller Host Memory Access Data reg in mmc + * address map. Located at address 0x7008 - 0x7014 + * Defined earlier (u32) + */ + +/* + * Memory Control Module of JAGCore Address Mapping + */ +typedef struct _MMC_t { // Location: + MMC_CTRL_t mmc_ctrl; // 0x7000 + MMC_SRAM_ACCESS_t sram_access; // 0x7004 + u32 sram_word1; // 0x7008 + u32 sram_word2; // 0x700C + u32 sram_word3; // 0x7010 + u32 sram_word4; // 0x7014 +} MMC_t, *PMMC_t; + +/* END OF MMC REGISTER ADDRESS MAP */ + + +/* START OF EXP ROM REGISTER ADDRESS MAP */ + +/* + * Expansion ROM Module of JAGCore Address Mapping + */ + +/* Take this out until it is not empty */ +#if 0 +typedef struct _EXP_ROM_t { + +} EXP_ROM_t, *PEXP_ROM_t; +#endif + +/* END OF EXP ROM REGISTER ADDRESS MAP */ + + +/* + * JAGCore Address Mapping + */ +typedef struct _ADDRESS_MAP_t { + GLOBAL_t global; + // unused section of global address map + u8 unused_global[4096 - sizeof(GLOBAL_t)]; + TXDMA_t txdma; + // unused section of txdma address map + u8 unused_txdma[4096 - sizeof(TXDMA_t)]; + RXDMA_t rxdma; + // unused section of rxdma address map + u8 unused_rxdma[4096 - sizeof(RXDMA_t)]; + TXMAC_t txmac; + // unused section of txmac address map + u8 unused_txmac[4096 - sizeof(TXMAC_t)]; + RXMAC_t rxmac; + // unused section of rxmac address map + u8 unused_rxmac[4096 - sizeof(RXMAC_t)]; + MAC_t mac; + // unused section of mac address map + u8 unused_mac[4096 - sizeof(MAC_t)]; + MAC_STAT_t macStat; + // unused section of mac stat address map + u8 unused_mac_stat[4096 - sizeof(MAC_STAT_t)]; + MMC_t mmc; + // unused section of mmc address map + u8 unused_mmc[4096 - sizeof(MMC_t)]; + // unused section of address map + u8 unused_[1015808]; + +/* Take this out until it is not empty */ +#if 0 + EXP_ROM_t exp_rom; +#endif + + u8 unused_exp_rom[4096]; // MGS-size TBD + u8 unused__[524288]; // unused section of address map +} ADDRESS_MAP_t, *PADDRESS_MAP_t; + +#endif /* _ET1310_ADDRESS_MAP_H_ */ diff --git a/drivers/staging/et131x/et1310_eeprom.c b/drivers/staging/et131x/et1310_eeprom.c new file mode 100644 index 000000000000..c2b194e6a54c --- /dev/null +++ b/drivers/staging/et131x/et1310_eeprom.c @@ -0,0 +1,480 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_eeprom.c - Code used to access the device's EEPROM + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#include "et131x_version.h" +#include "et131x_debug.h" +#include "et131x_defs.h" + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/bitops.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> + +#include "et1310_phy.h" +#include "et1310_pm.h" +#include "et1310_jagcore.h" +#include "et1310_eeprom.h" + +#include "et131x_adapter.h" +#include "et131x_initpci.h" +#include "et131x_isr.h" + +#include "et1310_tx.h" + + +/* + * EEPROM Defines + */ + +/* LBCIF Register Groups (addressed via 32-bit offsets) */ +#define LBCIF_DWORD0_GROUP_OFFSET 0xAC +#define LBCIF_DWORD1_GROUP_OFFSET 0xB0 + +/* LBCIF Registers (addressed via 8-bit offsets) */ +#define LBCIF_ADDRESS_REGISTER_OFFSET 0xAC +#define LBCIF_DATA_REGISTER_OFFSET 0xB0 +#define LBCIF_CONTROL_REGISTER_OFFSET 0xB1 +#define LBCIF_STATUS_REGISTER_OFFSET 0xB2 + +/* LBCIF Control Register Bits */ +#define LBCIF_CONTROL_SEQUENTIAL_READ 0x01 +#define LBCIF_CONTROL_PAGE_WRITE 0x02 +#define LBCIF_CONTROL_UNUSED1 0x04 +#define LBCIF_CONTROL_EEPROM_RELOAD 0x08 +#define LBCIF_CONTROL_UNUSED2 0x10 +#define LBCIF_CONTROL_TWO_BYTE_ADDR 0x20 +#define LBCIF_CONTROL_I2C_WRITE 0x40 +#define LBCIF_CONTROL_LBCIF_ENABLE 0x80 + +/* LBCIF Status Register Bits */ +#define LBCIF_STATUS_PHY_QUEUE_AVAIL 0x01 +#define LBCIF_STATUS_I2C_IDLE 0x02 +#define LBCIF_STATUS_ACK_ERROR 0x04 +#define LBCIF_STATUS_GENERAL_ERROR 0x08 +#define LBCIF_STATUS_UNUSED 0x30 +#define LBCIF_STATUS_CHECKSUM_ERROR 0x40 +#define LBCIF_STATUS_EEPROM_PRESENT 0x80 + +/* Miscellaneous Constraints */ +#define MAX_NUM_REGISTER_POLLS 1000 +#define MAX_NUM_WRITE_RETRIES 2 + +/* + * Define macros that allow individual register values to be extracted from a + * DWORD1 register grouping + */ +#define EXTRACT_DATA_REGISTER(x) (uint8_t)(x & 0xFF) +#define EXTRACT_STATUS_REGISTER(x) (uint8_t)((x >> 16) & 0xFF) +#define EXTRACT_CONTROL_REG(x) (uint8_t)((x >> 8) & 0xFF) + +/** + * EepromWriteByte - Write a byte to the ET1310's EEPROM + * @pAdapter: pointer to our private adapter structure + * @unAddress: the address to write + * @bData: the value to write + * @unEepronId: the ID of the EEPROM + * @unAddressingMode: how the EEPROM is to be accessed + * + * Returns SUCCESS or FAILURE + */ +int32_t EepromWriteByte(struct et131x_adapter *pAdapter, uint32_t unAddress, + uint8_t bData, uint32_t unEepromId, + uint32_t unAddressingMode) +{ + struct pci_dev *pdev = pAdapter->pdev; + int32_t nIndex; + int32_t nRetries; + int32_t nError = false; + int32_t nI2CWriteActive = 0; + int32_t nWriteSuccessful = 0; + uint8_t bControl; + uint8_t bStatus = 0; + uint32_t unDword1 = 0; + uint32_t unData = 0; + + /* + * The following excerpt is from "Serial EEPROM HW Design + * Specification" Version 0.92 (9/20/2004): + * + * Single Byte Writes + * + * For an EEPROM, an I2C single byte write is defined as a START + * condition followed by the device address, EEPROM address, one byte + * of data and a STOP condition. The STOP condition will trigger the + * EEPROM's internally timed write cycle to the nonvolatile memory. + * All inputs are disabled during this write cycle and the EEPROM will + * not respond to any access until the internal write is complete. + * The steps to execute a single byte write are as follows: + * + * 1. Check LBCIF Status Register for bits 6 & 3:2 all equal to 0 and + * bits 7,1:0 both equal to 1, at least once after reset. + * Subsequent operations need only to check that bits 1:0 are + * equal to 1 prior to starting a single byte write. + * + * 2. Write to the LBCIF Control Register: bit 7=1, bit 6=1, bit 3=0, + * and bits 1:0 both =0. Bit 5 should be set according to the + * type of EEPROM being accessed (1=two byte addressing, 0=one + * byte addressing). + * + * 3. Write the address to the LBCIF Address Register. + * + * 4. Write the data to the LBCIF Data Register (the I2C write will + * begin). + * + * 5. Monitor bit 1:0 of the LBCIF Status Register. When bits 1:0 are + * both equal to 1, the I2C write has completed and the internal + * write cycle of the EEPROM is about to start. (bits 1:0 = 01 is + * a legal state while waiting from both equal to 1, but bits + * 1:0 = 10 is invalid and implies that something is broken). + * + * 6. Check bit 3 of the LBCIF Status Register. If equal to 1, an + * error has occurred. + * + * 7. Check bit 2 of the LBCIF Status Register. If equal to 1 an ACK + * error has occurred on the address phase of the write. This + * could be due to an actual hardware failure or the EEPROM may + * still be in its internal write cycle from a previous write. + * This write operation was ignored and must be repeated later. + * + * 8. Set bit 6 of the LBCIF Control Register = 0. If another write is + * required, go to step 1. + */ + + /* Step 1: */ + for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) { + /* Read registers grouped in DWORD1 */ + if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET, + &unDword1)) { + nError = 1; + break; + } + + bStatus = EXTRACT_STATUS_REGISTER(unDword1); + + if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL && + bStatus & LBCIF_STATUS_I2C_IDLE) { + /* bits 1:0 are equal to 1 */ + break; + } + } + + if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) { + return FAILURE; + } + + /* Step 2: */ + bControl = 0; + bControl |= LBCIF_CONTROL_LBCIF_ENABLE | LBCIF_CONTROL_I2C_WRITE; + + if (unAddressingMode == DUAL_BYTE) { + bControl |= LBCIF_CONTROL_TWO_BYTE_ADDR; + } + + if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER_OFFSET, + bControl)) { + return FAILURE; + } + + nI2CWriteActive = 1; + + /* Prepare EEPROM address for Step 3 */ + unAddress |= (unAddressingMode == DUAL_BYTE) ? + (unEepromId << 16) : (unEepromId << 8); + + for (nRetries = 0; nRetries < MAX_NUM_WRITE_RETRIES; nRetries++) { + /* Step 3:*/ + if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER_OFFSET, + unAddress)) { + break; + } + + /* Step 4: */ + if (pci_write_config_byte(pdev, LBCIF_DATA_REGISTER_OFFSET, + bData)) { + break; + } + + /* Step 5: */ + for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) { + /* Read registers grouped in DWORD1 */ + if (pci_read_config_dword(pdev, + LBCIF_DWORD1_GROUP_OFFSET, + &unDword1)) { + nError = 1; + break; + } + + bStatus = EXTRACT_STATUS_REGISTER(unDword1); + + if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL && + bStatus & LBCIF_STATUS_I2C_IDLE) { + /* I2C write complete */ + break; + } + } + + if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) { + break; + } + + /* + * Step 6: Don't break here if we are revision 1, this is + * so we do a blind write for load bug. + */ + if (bStatus & LBCIF_STATUS_GENERAL_ERROR + && pAdapter->RevisionID == 0) { + break; + } + + /* Step 7 */ + if (bStatus & LBCIF_STATUS_ACK_ERROR) { + /* + * This could be due to an actual hardware failure + * or the EEPROM may still be in its internal write + * cycle from a previous write. This write operation + * was ignored and must be repeated later. + */ + udelay(10); + continue; + } + + nWriteSuccessful = 1; + break; + } + + /* Step 8: */ + udelay(10); + nIndex = 0; + while (nI2CWriteActive) { + bControl &= ~LBCIF_CONTROL_I2C_WRITE; + + if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER_OFFSET, + bControl)) { + nWriteSuccessful = 0; + } + + /* Do read until internal ACK_ERROR goes away meaning write + * completed + */ + do { + pci_write_config_dword(pdev, + LBCIF_ADDRESS_REGISTER_OFFSET, + unAddress); + do { + pci_read_config_dword(pdev, + LBCIF_DATA_REGISTER_OFFSET, &unData); + } while ((unData & 0x00010000) == 0); + } while (unData & 0x00040000); + + bControl = EXTRACT_CONTROL_REG(unData); + + if (bControl != 0xC0 || nIndex == 10000) { + break; + } + + nIndex++; + } + + return nWriteSuccessful ? SUCCESS : FAILURE; +} + +/** + * EepromReadByte - Read a byte from the ET1310's EEPROM + * @pAdapter: pointer to our private adapter structure + * @unAddress: the address from which to read + * @pbData: a pointer to a byte in which to store the value of the read + * @unEepronId: the ID of the EEPROM + * @unAddressingMode: how the EEPROM is to be accessed + * + * Returns SUCCESS or FAILURE + */ +int32_t EepromReadByte(struct et131x_adapter *pAdapter, uint32_t unAddress, + uint8_t *pbData, uint32_t unEepromId, + uint32_t unAddressingMode) +{ + struct pci_dev *pdev = pAdapter->pdev; + int32_t nIndex; + int32_t nError = 0; + uint8_t bControl; + uint8_t bStatus = 0; + uint32_t unDword1 = 0; + + /* + * The following excerpt is from "Serial EEPROM HW Design + * Specification" Version 0.92 (9/20/2004): + * + * Single Byte Reads + * + * A single byte read is similar to the single byte write, with the + * exception of the data flow: + * + * 1. Check LBCIF Status Register for bits 6 & 3:2 all equal to 0 and + * bits 7,1:0 both equal to 1, at least once after reset. + * Subsequent operations need only to check that bits 1:0 are equal + * to 1 prior to starting a single byte read. + * + * 2. Write to the LBCIF Control Register: bit 7=1, bit 6=0, bit 3=0, + * and bits 1:0 both =0. Bit 5 should be set according to the type + * of EEPROM being accessed (1=two byte addressing, 0=one byte + * addressing). + * + * 3. Write the address to the LBCIF Address Register (I2C read will + * begin). + * + * 4. Monitor bit 0 of the LBCIF Status Register. When =1, I2C read + * is complete. (if bit 1 =1 and bit 0 stays =0, a hardware failure + * has occurred). + * + * 5. Check bit 2 of the LBCIF Status Register. If =1, then an error + * has occurred. The data that has been returned from the PHY may + * be invalid. + * + * 6. Regardless of error status, read data byte from LBCIF Data + * Register. If another byte is required, go to step 1. + */ + + /* Step 1: */ + for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) { + /* Read registers grouped in DWORD1 */ + if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET, + &unDword1)) { + nError = 1; + break; + } + + bStatus = EXTRACT_STATUS_REGISTER(unDword1); + + if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL && + bStatus & LBCIF_STATUS_I2C_IDLE) { + /* bits 1:0 are equal to 1 */ + break; + } + } + + if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) { + return FAILURE; + } + + /* Step 2: */ + bControl = 0; + bControl |= LBCIF_CONTROL_LBCIF_ENABLE; + + if (unAddressingMode == DUAL_BYTE) { + bControl |= LBCIF_CONTROL_TWO_BYTE_ADDR; + } + + if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER_OFFSET, + bControl)) { + return FAILURE; + } + + /* Step 3: */ + unAddress |= (unAddressingMode == DUAL_BYTE) ? + (unEepromId << 16) : (unEepromId << 8); + + if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER_OFFSET, + unAddress)) { + return FAILURE; + } + + /* Step 4: */ + for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) { + /* Read registers grouped in DWORD1 */ + if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET, + &unDword1)) { + nError = 1; + break; + } + + bStatus = EXTRACT_STATUS_REGISTER(unDword1); + + if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL + && bStatus & LBCIF_STATUS_I2C_IDLE) { + /* I2C read complete */ + break; + } + } + + if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) { + return FAILURE; + } + + /* Step 6: */ + *pbData = EXTRACT_DATA_REGISTER(unDword1); + + return (bStatus & LBCIF_STATUS_ACK_ERROR) ? FAILURE : SUCCESS; +} diff --git a/drivers/staging/et131x/et1310_eeprom.h b/drivers/staging/et131x/et1310_eeprom.h new file mode 100644 index 000000000000..9b6f8ad77b49 --- /dev/null +++ b/drivers/staging/et131x/et1310_eeprom.h @@ -0,0 +1,89 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_eeprom.h - Defines, structs, enums, prototypes, etc. used for EEPROM + * access routines + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef __ET1310_EEPROM_H__ +#define __ET1310_EEPROM_H__ + +#include "et1310_address_map.h" + +#ifndef SUCCESS +#define SUCCESS 0 +#define FAILURE 1 +#endif + +#ifndef READ +#define READ 0 +#define WRITE 1 +#endif + +#ifndef SINGLE_BYTE +#define SINGLE_BYTE 0 +#define DUAL_BYTE 1 +#endif + +/* Forward declaration of the private adapter structure */ +struct et131x_adapter; + +int32_t EepromWriteByte(struct et131x_adapter *adapter, u32 unAddress, + u8 bData, u32 unEepromId, + u32 unAddressingMode); +int32_t EepromReadByte(struct et131x_adapter *adapter, u32 unAddress, + u8 *pbData, u32 unEepromId, + u32 unAddressingMode); + +#endif /* _ET1310_EEPROM_H_ */ diff --git a/drivers/staging/et131x/et1310_jagcore.c b/drivers/staging/et131x/et1310_jagcore.c new file mode 100644 index 000000000000..993b30ea71e2 --- /dev/null +++ b/drivers/staging/et131x/et1310_jagcore.c @@ -0,0 +1,220 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_jagcore.c - All code pertaining to the ET1301/ET131x's JAGcore + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#include "et131x_version.h" +#include "et131x_debug.h" +#include "et131x_defs.h" + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/bitops.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> + +#include "et1310_phy.h" +#include "et1310_pm.h" +#include "et1310_jagcore.h" + +#include "et131x_adapter.h" +#include "et131x_initpci.h" + +/* Data for debugging facilities */ +#ifdef CONFIG_ET131X_DEBUG +extern dbg_info_t *et131x_dbginfo; +#endif /* CONFIG_ET131X_DEBUG */ + +/** + * ConfigGlobalRegs - Used to configure the global registers on the JAGCore + * @pAdpater: pointer to our adapter structure + */ +void ConfigGlobalRegs(struct et131x_adapter *pAdapter) +{ + struct _GLOBAL_t __iomem *pGbl = &pAdapter->CSRAddress->global; + + DBG_ENTER(et131x_dbginfo); + + if (pAdapter->RegistryPhyLoopbk == false) { + if (pAdapter->RegistryJumboPacket < 2048) { + /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word + * block of RAM that the driver can split between Tx + * and Rx as it desires. Our default is to split it + * 50/50: + */ + writel(0, &pGbl->rxq_start_addr.value); + writel(pAdapter->RegistryRxMemEnd, + &pGbl->rxq_end_addr.value); + writel(pAdapter->RegistryRxMemEnd + 1, + &pGbl->txq_start_addr.value); + writel(INTERNAL_MEM_SIZE - 1, + &pGbl->txq_end_addr.value); + } else if (pAdapter->RegistryJumboPacket < 8192) { + /* For jumbo packets > 2k but < 8k, split 50-50. */ + writel(0, &pGbl->rxq_start_addr.value); + writel(INTERNAL_MEM_RX_OFFSET, + &pGbl->rxq_end_addr.value); + writel(INTERNAL_MEM_RX_OFFSET + 1, + &pGbl->txq_start_addr.value); + writel(INTERNAL_MEM_SIZE - 1, + &pGbl->txq_end_addr.value); + } else { + /* 9216 is the only packet size greater than 8k that + * is available. The Tx buffer has to be big enough + * for one whole packet on the Tx side. We'll make + * the Tx 9408, and give the rest to Rx + */ + writel(0x0000, &pGbl->rxq_start_addr.value); + writel(0x01b3, &pGbl->rxq_end_addr.value); + writel(0x01b4, &pGbl->txq_start_addr.value); + writel(INTERNAL_MEM_SIZE - 1, + &pGbl->txq_end_addr.value); + } + + /* Initialize the loopback register. Disable all loopbacks. */ + writel(0, &pGbl->loopback.value); + } else { + /* For PHY Line loopback, the memory is configured as if Tx + * and Rx both have all the memory. This is because the + * RxMAC will write data into the space, and the TxMAC will + * read it out. + */ + writel(0, &pGbl->rxq_start_addr.value); + writel(INTERNAL_MEM_SIZE - 1, &pGbl->rxq_end_addr.value); + writel(0, &pGbl->txq_start_addr.value); + writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr.value); + + /* Initialize the loopback register (MAC loopback). */ + writel(1, &pGbl->loopback.value); + } + + /* MSI Register */ + writel(0, &pGbl->msi_config.value); + + /* By default, disable the watchdog timer. It will be enabled when + * a packet is queued. + */ + writel(0, &pGbl->watchdog_timer); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * ConfigMMCRegs - Used to configure the main memory registers in the JAGCore + * @pAdapter: pointer to our adapter structure + */ +void ConfigMMCRegs(struct et131x_adapter *pAdapter) +{ + MMC_CTRL_t mmc_ctrl = { 0 }; + + DBG_ENTER(et131x_dbginfo); + + /* All we need to do is initialize the Memory Control Register */ + mmc_ctrl.bits.force_ce = 0x0; + mmc_ctrl.bits.rxdma_disable = 0x0; + mmc_ctrl.bits.txdma_disable = 0x0; + mmc_ctrl.bits.txmac_disable = 0x0; + mmc_ctrl.bits.rxmac_disable = 0x0; + mmc_ctrl.bits.arb_disable = 0x0; + mmc_ctrl.bits.mmc_enable = 0x1; + + writel(mmc_ctrl.value, &pAdapter->CSRAddress->mmc.mmc_ctrl.value); + + DBG_LEAVE(et131x_dbginfo); +} + +void et131x_enable_interrupts(struct et131x_adapter *adapter) +{ + uint32_t MaskValue; + + /* Enable all global interrupts */ + if ((adapter->FlowControl == TxOnly) || (adapter->FlowControl == Both)) { + MaskValue = INT_MASK_ENABLE; + } else { + MaskValue = INT_MASK_ENABLE_NO_FLOW; + } + + if (adapter->DriverNoPhyAccess) { + MaskValue |= 0x10000; + } + + adapter->CachedMaskValue.value = MaskValue; + writel(MaskValue, &adapter->CSRAddress->global.int_mask.value); +} + +void et131x_disable_interrupts(struct et131x_adapter * adapter) +{ + /* Disable all global interrupts */ + adapter->CachedMaskValue.value = INT_MASK_DISABLE; + writel(INT_MASK_DISABLE, &adapter->CSRAddress->global.int_mask.value); +} diff --git a/drivers/staging/et131x/et1310_jagcore.h b/drivers/staging/et131x/et1310_jagcore.h new file mode 100644 index 000000000000..9fc829336df1 --- /dev/null +++ b/drivers/staging/et131x/et1310_jagcore.h @@ -0,0 +1,112 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_jagcore.h - Defines, structs, enums, prototypes, etc. pertaining to + * the JAGCore + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef __ET1310_JAGCORE_H__ +#define __ET1310_JAGCORE_H__ + +#include "et1310_address_map.h" + + +#define INTERNAL_MEM_SIZE 0x400 //1024 of internal memory +#define INTERNAL_MEM_RX_OFFSET 0x1FF //50% Tx, 50% Rx + +#define REGS_MAX_ARRAY 4096 + +/* + * For interrupts, normal running is: + * rxdma_xfr_done, phy_interrupt, mac_stat_interrupt, + * watchdog_interrupt & txdma_xfer_done + * + * In both cases, when flow control is enabled for either Tx or bi-direction, + * we additional enable rx_fbr0_low and rx_fbr1_low, so we know when the + * buffer rings are running low. + */ +#define INT_MASK_DISABLE 0xffffffff + +// NOTE: Masking out MAC_STAT Interrupt for now... +//#define INT_MASK_ENABLE 0xfff6bf17 +//#define INT_MASK_ENABLE_NO_FLOW 0xfff6bfd7 +#define INT_MASK_ENABLE 0xfffebf17 +#define INT_MASK_ENABLE_NO_FLOW 0xfffebfd7 + +/* DATA STRUCTURES FOR DIRECT REGISTER ACCESS */ + +typedef struct { + u8 bReadWrite; + u32 nRegCount; + u32 nData[REGS_MAX_ARRAY]; + u32 nOffsets[REGS_MAX_ARRAY]; +} JAGCORE_ACCESS_REGS, *PJAGCORE_ACCESS_REGS; + +typedef struct { + u8 bReadWrite; + u32 nDataWidth; + u32 nRegCount; + u32 nOffsets[REGS_MAX_ARRAY]; + u32 nData[REGS_MAX_ARRAY]; +} PCI_CFG_SPACE_REGS, *PPCI_CFG_SPACE_REGS; + +/* Forward declaration of the private adapter structure */ +struct et131x_adapter; + +void ConfigGlobalRegs(struct et131x_adapter *pAdapter); +void ConfigMMCRegs(struct et131x_adapter *pAdapter); +void et131x_enable_interrupts(struct et131x_adapter *adapter); +void et131x_disable_interrupts(struct et131x_adapter *adapter); + +#endif /* __ET1310_JAGCORE_H__ */ diff --git a/drivers/staging/et131x/et1310_mac.c b/drivers/staging/et131x/et1310_mac.c new file mode 100644 index 000000000000..1924968ab24f --- /dev/null +++ b/drivers/staging/et131x/et1310_mac.c @@ -0,0 +1,792 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_mac.c - All code and routines pertaining to the MAC + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#include "et131x_version.h" +#include "et131x_debug.h" +#include "et131x_defs.h" + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/bitops.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/crc32.h> + +#include "et1310_phy.h" +#include "et1310_pm.h" +#include "et1310_jagcore.h" +#include "et1310_mac.h" + +#include "et131x_adapter.h" +#include "et131x_initpci.h" + +/* Data for debugging facilities */ +#ifdef CONFIG_ET131X_DEBUG +extern dbg_info_t *et131x_dbginfo; +#endif /* CONFIG_ET131X_DEBUG */ + +/** + * ConfigMacRegs1 - Initialize the first part of MAC regs + * @pAdpater: pointer to our adapter structure + */ +void ConfigMACRegs1(struct et131x_adapter *pAdapter) +{ + struct _MAC_t __iomem *pMac = &pAdapter->CSRAddress->mac; + MAC_STATION_ADDR1_t station1; + MAC_STATION_ADDR2_t station2; + MAC_IPG_t ipg; + MAC_HFDP_t hfdp; + MII_MGMT_CFG_t mii_mgmt_cfg; + + DBG_ENTER(et131x_dbginfo); + + /* First we need to reset everything. Write to MAC configuration + * register 1 to perform reset. + */ + writel(0xC00F0000, &pMac->cfg1.value); + + /* Next lets configure the MAC Inter-packet gap register */ + ipg.bits.non_B2B_ipg_1 = 0x38; // 58d + ipg.bits.non_B2B_ipg_2 = 0x58; // 88d + ipg.bits.min_ifg_enforce = 0x50; // 80d + ipg.bits.B2B_ipg = 0x60; // 96d + writel(ipg.value, &pMac->ipg.value); + + /* Next lets configure the MAC Half Duplex register */ + hfdp.bits.alt_beb_trunc = 0xA; + hfdp.bits.alt_beb_enable = 0x0; + hfdp.bits.bp_no_backoff = 0x0; + hfdp.bits.no_backoff = 0x0; + hfdp.bits.excess_defer = 0x1; + hfdp.bits.rexmit_max = 0xF; + hfdp.bits.coll_window = 0x37; // 55d + writel(hfdp.value, &pMac->hfdp.value); + + /* Next lets configure the MAC Interface Control register */ + writel(0, &pMac->if_ctrl.value); + + /* Let's move on to setting up the mii managment configuration */ + mii_mgmt_cfg.bits.reset_mii_mgmt = 0; + mii_mgmt_cfg.bits.scan_auto_incremt = 0; + mii_mgmt_cfg.bits.preamble_suppress = 0; + mii_mgmt_cfg.bits.mgmt_clk_reset = 0x7; + writel(mii_mgmt_cfg.value, &pMac->mii_mgmt_cfg.value); + + /* Next lets configure the MAC Station Address register. These + * values are read from the EEPROM during initialization and stored + * in the adapter structure. We write what is stored in the adapter + * structure to the MAC Station Address registers high and low. This + * station address is used for generating and checking pause control + * packets. + */ + station2.bits.Octet1 = pAdapter->CurrentAddress[0]; + station2.bits.Octet2 = pAdapter->CurrentAddress[1]; + station1.bits.Octet3 = pAdapter->CurrentAddress[2]; + station1.bits.Octet4 = pAdapter->CurrentAddress[3]; + station1.bits.Octet5 = pAdapter->CurrentAddress[4]; + station1.bits.Octet6 = pAdapter->CurrentAddress[5]; + writel(station1.value, &pMac->station_addr_1.value); + writel(station2.value, &pMac->station_addr_2.value); + + /* Max ethernet packet in bytes that will passed by the mac without + * being truncated. Allow the MAC to pass 4 more than our max packet + * size. This is 4 for the Ethernet CRC. + * + * Packets larger than (RegistryJumboPacket) that do not contain a + * VLAN ID will be dropped by the Rx function. + */ + writel(pAdapter->RegistryJumboPacket + 4, &pMac->max_fm_len.value); + + /* clear out MAC config reset */ + writel(0, &pMac->cfg1.value); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * ConfigMacRegs2 - Initialize the second part of MAC regs + * @pAdpater: pointer to our adapter structure + */ +void ConfigMACRegs2(struct et131x_adapter *pAdapter) +{ + int32_t delay = 0; + struct _MAC_t __iomem *pMac = &pAdapter->CSRAddress->mac; + MAC_CFG1_t cfg1; + MAC_CFG2_t cfg2; + MAC_IF_CTRL_t ifctrl; + TXMAC_CTL_t ctl; + + DBG_ENTER(et131x_dbginfo); + + ctl.value = readl(&pAdapter->CSRAddress->txmac.ctl.value); + cfg1.value = readl(&pMac->cfg1.value); + cfg2.value = readl(&pMac->cfg2.value); + ifctrl.value = readl(&pMac->if_ctrl.value); + + if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { + cfg2.bits.if_mode = 0x2; + ifctrl.bits.phy_mode = 0x0; + } else { + cfg2.bits.if_mode = 0x1; + ifctrl.bits.phy_mode = 0x1; + } + + /* We need to enable Rx/Tx */ + cfg1.bits.rx_enable = 0x1; + cfg1.bits.tx_enable = 0x1; + + /* Set up flow control */ + cfg1.bits.tx_flow = 0x1; + + if ((pAdapter->FlowControl == RxOnly) || + (pAdapter->FlowControl == Both)) { + cfg1.bits.rx_flow = 0x1; + } else { + cfg1.bits.rx_flow = 0x0; + } + + /* Initialize loop back to off */ + cfg1.bits.loop_back = 0; + + writel(cfg1.value, &pMac->cfg1.value); + + /* Now we need to initialize the MAC Configuration 2 register */ + cfg2.bits.preamble_len = 0x7; + cfg2.bits.huge_frame = 0x0; + /* LENGTH FIELD CHECKING bit4: Set this bit to cause the MAC to check + * the frame's length field to ensure it matches the actual data + * field length. Clear this bit if no length field checking is + * desired. Its default is 0. + */ + cfg2.bits.len_check = 0x1; + + if (pAdapter->RegistryPhyLoopbk == false) { + cfg2.bits.pad_crc = 0x1; + cfg2.bits.crc_enable = 0x1; + } else { + cfg2.bits.pad_crc = 0; + cfg2.bits.crc_enable = 0; + } + + /* 1 - full duplex, 0 - half-duplex */ + cfg2.bits.full_duplex = pAdapter->uiDuplexMode; + ifctrl.bits.ghd_mode = !pAdapter->uiDuplexMode; + + writel(ifctrl.value, &pMac->if_ctrl.value); + writel(cfg2.value, &pMac->cfg2.value); + + do { + udelay(10); + delay++; + cfg1.value = readl(&pMac->cfg1.value); + } while ((!cfg1.bits.syncd_rx_en || + !cfg1.bits.syncd_tx_en) && + delay < 100); + + if (delay == 100) { + DBG_ERROR(et131x_dbginfo, + "Syncd bits did not respond correctly cfg1 word 0x%08x\n", + cfg1.value); + } + + DBG_TRACE(et131x_dbginfo, + "Speed %d, Dup %d, CFG1 0x%08x, CFG2 0x%08x, if_ctrl 0x%08x\n", + pAdapter->uiLinkSpeed, pAdapter->uiDuplexMode, + readl(&pMac->cfg1.value), readl(&pMac->cfg2.value), + readl(&pMac->if_ctrl.value)); + + /* Enable TXMAC */ + ctl.bits.txmac_en = 0x1; + ctl.bits.fc_disable = 0x1; + writel(ctl.value, &pAdapter->CSRAddress->txmac.ctl.value); + + /* Ready to start the RXDMA/TXDMA engine */ + if (!MP_TEST_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER)) { + et131x_rx_dma_enable(pAdapter); + et131x_tx_dma_enable(pAdapter); + } else { + DBG_WARNING(et131x_dbginfo, + "Didn't enable Rx/Tx due to low-power mode\n"); + } + + DBG_LEAVE(et131x_dbginfo); +} + +void ConfigRxMacRegs(struct et131x_adapter *pAdapter) +{ + struct _RXMAC_t __iomem *pRxMac = &pAdapter->CSRAddress->rxmac; + RXMAC_WOL_SA_LO_t sa_lo; + RXMAC_WOL_SA_HI_t sa_hi; + RXMAC_PF_CTRL_t pf_ctrl = { 0 }; + + DBG_ENTER(et131x_dbginfo); + + /* Disable the MAC while it is being configured (also disable WOL) */ + writel(0x8, &pRxMac->ctrl.value); + + /* Initialize WOL to disabled. */ + writel(0, &pRxMac->crc0.value); + writel(0, &pRxMac->crc12.value); + writel(0, &pRxMac->crc34.value); + + /* We need to set the WOL mask0 - mask4 next. We initialize it to + * its default Values of 0x00000000 because there are not WOL masks + * as of this time. + */ + writel(0, &pRxMac->mask0_word0); + writel(0, &pRxMac->mask0_word1); + writel(0, &pRxMac->mask0_word2); + writel(0, &pRxMac->mask0_word3); + + writel(0, &pRxMac->mask1_word0); + writel(0, &pRxMac->mask1_word1); + writel(0, &pRxMac->mask1_word2); + writel(0, &pRxMac->mask1_word3); + + writel(0, &pRxMac->mask2_word0); + writel(0, &pRxMac->mask2_word1); + writel(0, &pRxMac->mask2_word2); + writel(0, &pRxMac->mask2_word3); + + writel(0, &pRxMac->mask3_word0); + writel(0, &pRxMac->mask3_word1); + writel(0, &pRxMac->mask3_word2); + writel(0, &pRxMac->mask3_word3); + + writel(0, &pRxMac->mask4_word0); + writel(0, &pRxMac->mask4_word1); + writel(0, &pRxMac->mask4_word2); + writel(0, &pRxMac->mask4_word3); + + /* Lets setup the WOL Source Address */ + sa_lo.bits.sa3 = pAdapter->CurrentAddress[2]; + sa_lo.bits.sa4 = pAdapter->CurrentAddress[3]; + sa_lo.bits.sa5 = pAdapter->CurrentAddress[4]; + sa_lo.bits.sa6 = pAdapter->CurrentAddress[5]; + writel(sa_lo.value, &pRxMac->sa_lo.value); + + sa_hi.bits.sa1 = pAdapter->CurrentAddress[0]; + sa_hi.bits.sa2 = pAdapter->CurrentAddress[1]; + writel(sa_hi.value, &pRxMac->sa_hi.value); + + /* Disable all Packet Filtering */ + writel(0, &pRxMac->pf_ctrl.value); + + /* Let's initialize the Unicast Packet filtering address */ + if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_DIRECTED) { + SetupDeviceForUnicast(pAdapter); + pf_ctrl.bits.filter_uni_en = 1; + } else { + writel(0, &pRxMac->uni_pf_addr1.value); + writel(0, &pRxMac->uni_pf_addr2.value); + writel(0, &pRxMac->uni_pf_addr3.value); + } + + /* Let's initialize the Multicast hash */ + if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST) { + pf_ctrl.bits.filter_multi_en = 0; + } else { + pf_ctrl.bits.filter_multi_en = 1; + SetupDeviceForMulticast(pAdapter); + } + + /* Runt packet filtering. Didn't work in version A silicon. */ + pf_ctrl.bits.min_pkt_size = NIC_MIN_PACKET_SIZE + 4; + pf_ctrl.bits.filter_frag_en = 1; + + if (pAdapter->RegistryJumboPacket > 8192) { + RXMAC_MCIF_CTRL_MAX_SEG_t mcif_ctrl_max_seg; + + /* In order to transmit jumbo packets greater than 8k, the + * FIFO between RxMAC and RxDMA needs to be reduced in size + * to (16k - Jumbo packet size). In order to implement this, + * we must use "cut through" mode in the RxMAC, which chops + * packets down into segments which are (max_size * 16). In + * this case we selected 256 bytes, since this is the size of + * the PCI-Express TLP's that the 1310 uses. + */ + mcif_ctrl_max_seg.bits.seg_en = 0x1; + mcif_ctrl_max_seg.bits.fc_en = 0x0; + mcif_ctrl_max_seg.bits.max_size = 0x10; + + writel(mcif_ctrl_max_seg.value, + &pRxMac->mcif_ctrl_max_seg.value); + } else { + writel(0, &pRxMac->mcif_ctrl_max_seg.value); + } + + /* Initialize the MCIF water marks */ + writel(0, &pRxMac->mcif_water_mark.value); + + /* Initialize the MIF control */ + writel(0, &pRxMac->mif_ctrl.value); + + /* Initialize the Space Available Register */ + writel(0, &pRxMac->space_avail.value); + + /* Initialize the the mif_ctrl register + * bit 3: Receive code error. One or more nibbles were signaled as + * errors during the reception of the packet. Clear this + * bit in Gigabit, set it in 100Mbit. This was derived + * experimentally at UNH. + * bit 4: Receive CRC error. The packet's CRC did not match the + * internally generated CRC. + * bit 5: Receive length check error. Indicates that frame length + * field value in the packet does not match the actual data + * byte length and is not a type field. + * bit 16: Receive frame truncated. + * bit 17: Drop packet enable + */ + if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) { + writel(0x30038, &pRxMac->mif_ctrl.value); + } else { + writel(0x30030, &pRxMac->mif_ctrl.value); + } + + /* Finally we initialize RxMac to be enabled & WOL disabled. Packet + * filter is always enabled since it is where the runt packets are + * supposed to be dropped. For version A silicon, runt packet + * dropping doesn't work, so it is disabled in the pf_ctrl register, + * but we still leave the packet filter on. + */ + writel(pf_ctrl.value, &pRxMac->pf_ctrl.value); + writel(0x9, &pRxMac->ctrl.value); + + DBG_LEAVE(et131x_dbginfo); +} + +void ConfigTxMacRegs(struct et131x_adapter *pAdapter) +{ + struct _TXMAC_t __iomem *pTxMac = &pAdapter->CSRAddress->txmac; + TXMAC_CF_PARAM_t Local; + + DBG_ENTER(et131x_dbginfo); + + /* We need to update the Control Frame Parameters + * cfpt - control frame pause timer set to 64 (0x40) + * cfep - control frame extended pause timer set to 0x0 + */ + if (pAdapter->FlowControl == None) { + writel(0, &pTxMac->cf_param.value); + } else { + Local.bits.cfpt = 0x40; + Local.bits.cfep = 0x0; + writel(Local.value, &pTxMac->cf_param.value); + } + + DBG_LEAVE(et131x_dbginfo); +} + +void ConfigMacStatRegs(struct et131x_adapter *pAdapter) +{ + struct _MAC_STAT_t __iomem *pDevMacStat = + &pAdapter->CSRAddress->macStat; + + DBG_ENTER(et131x_dbginfo); + + /* Next we need to initialize all the MAC_STAT registers to zero on + * the device. + */ + writel(0, &pDevMacStat->RFcs); + writel(0, &pDevMacStat->RAln); + writel(0, &pDevMacStat->RFlr); + writel(0, &pDevMacStat->RDrp); + writel(0, &pDevMacStat->RCde); + writel(0, &pDevMacStat->ROvr); + writel(0, &pDevMacStat->RFrg); + + writel(0, &pDevMacStat->TScl); + writel(0, &pDevMacStat->TDfr); + writel(0, &pDevMacStat->TMcl); + writel(0, &pDevMacStat->TLcl); + writel(0, &pDevMacStat->TNcl); + writel(0, &pDevMacStat->TOvr); + writel(0, &pDevMacStat->TUnd); + + /* Unmask any counters that we want to track the overflow of. + * Initially this will be all counters. It may become clear later + * that we do not need to track all counters. + */ + { + MAC_STAT_REG_1_t Carry1M = { 0xffffffff }; + + Carry1M.bits.rdrp = 0; + Carry1M.bits.rjbr = 1; + Carry1M.bits.rfrg = 0; + Carry1M.bits.rovr = 0; + Carry1M.bits.rund = 1; + Carry1M.bits.rcse = 1; + Carry1M.bits.rcde = 0; + Carry1M.bits.rflr = 0; + Carry1M.bits.raln = 0; + Carry1M.bits.rxuo = 1; + Carry1M.bits.rxpf = 1; + Carry1M.bits.rxcf = 1; + Carry1M.bits.rbca = 1; + Carry1M.bits.rmca = 1; + Carry1M.bits.rfcs = 0; + Carry1M.bits.rpkt = 1; + Carry1M.bits.rbyt = 1; + Carry1M.bits.trmgv = 1; + Carry1M.bits.trmax = 1; + Carry1M.bits.tr1k = 1; + Carry1M.bits.tr511 = 1; + Carry1M.bits.tr255 = 1; + Carry1M.bits.tr127 = 1; + Carry1M.bits.tr64 = 1; + + writel(Carry1M.value, &pDevMacStat->Carry1M.value); + } + + { + MAC_STAT_REG_2_t Carry2M = { 0xffffffff }; + + Carry2M.bits.tdrp = 1; + Carry2M.bits.tpfh = 1; + Carry2M.bits.tncl = 0; + Carry2M.bits.txcl = 1; + Carry2M.bits.tlcl = 0; + Carry2M.bits.tmcl = 0; + Carry2M.bits.tscl = 0; + Carry2M.bits.tedf = 1; + Carry2M.bits.tdfr = 0; + Carry2M.bits.txpf = 1; + Carry2M.bits.tbca = 1; + Carry2M.bits.tmca = 1; + Carry2M.bits.tpkt = 1; + Carry2M.bits.tbyt = 1; + Carry2M.bits.tfrg = 1; + Carry2M.bits.tund = 0; + Carry2M.bits.tovr = 0; + Carry2M.bits.txcf = 1; + Carry2M.bits.tfcs = 1; + Carry2M.bits.tjbr = 1; + + writel(Carry2M.value, &pDevMacStat->Carry2M.value); + } + + DBG_LEAVE(et131x_dbginfo); +} + +void ConfigFlowControl(struct et131x_adapter * pAdapter) +{ + if (pAdapter->uiDuplexMode == 0) { + pAdapter->FlowControl = None; + } else { + char RemotePause, RemoteAsyncPause; + + ET1310_PhyAccessMiBit(pAdapter, + TRUEPHY_BIT_READ, 5, 10, &RemotePause); + ET1310_PhyAccessMiBit(pAdapter, + TRUEPHY_BIT_READ, 5, 11, + &RemoteAsyncPause); + + if ((RemotePause == TRUEPHY_BIT_SET) && + (RemoteAsyncPause == TRUEPHY_BIT_SET)) { + pAdapter->FlowControl = pAdapter->RegistryFlowControl; + } else if ((RemotePause == TRUEPHY_BIT_SET) && + (RemoteAsyncPause == TRUEPHY_BIT_CLEAR)) { + if (pAdapter->RegistryFlowControl == Both) { + pAdapter->FlowControl = Both; + } else { + pAdapter->FlowControl = None; + } + } else if ((RemotePause == TRUEPHY_BIT_CLEAR) && + (RemoteAsyncPause == TRUEPHY_BIT_CLEAR)) { + pAdapter->FlowControl = None; + } else {/* if (RemotePause == TRUEPHY_CLEAR_BIT && + RemoteAsyncPause == TRUEPHY_SET_BIT) */ + if (pAdapter->RegistryFlowControl == Both) { + pAdapter->FlowControl = RxOnly; + } else { + pAdapter->FlowControl = None; + } + } + } +} + +/** + * UpdateMacStatHostCounters - Update the local copy of the statistics + * @pAdapter: pointer to the adapter structure + */ +void UpdateMacStatHostCounters(struct et131x_adapter *pAdapter) +{ + struct _ce_stats_t *stats = &pAdapter->Stats; + struct _MAC_STAT_t __iomem *pDevMacStat = + &pAdapter->CSRAddress->macStat; + + stats->collisions += readl(&pDevMacStat->TNcl); + stats->first_collision += readl(&pDevMacStat->TScl); + stats->tx_deferred += readl(&pDevMacStat->TDfr); + stats->excessive_collisions += readl(&pDevMacStat->TMcl); + stats->late_collisions += readl(&pDevMacStat->TLcl); + stats->tx_uflo += readl(&pDevMacStat->TUnd); + stats->max_pkt_error += readl(&pDevMacStat->TOvr); + + stats->alignment_err += readl(&pDevMacStat->RAln); + stats->crc_err += readl(&pDevMacStat->RCde); + stats->norcvbuf += readl(&pDevMacStat->RDrp); + stats->rx_ov_flow += readl(&pDevMacStat->ROvr); + stats->code_violations += readl(&pDevMacStat->RFcs); + stats->length_err += readl(&pDevMacStat->RFlr); + + stats->other_errors += readl(&pDevMacStat->RFrg); +} + +/** + * HandleMacStatInterrupt + * @pAdapter: pointer to the adapter structure + * + * One of the MACSTAT counters has wrapped. Update the local copy of + * the statistics held in the adapter structure, checking the "wrap" + * bit for each counter. + */ +void HandleMacStatInterrupt(struct et131x_adapter *pAdapter) +{ + MAC_STAT_REG_1_t Carry1; + MAC_STAT_REG_2_t Carry2; + + DBG_ENTER(et131x_dbginfo); + + /* Read the interrupt bits from the register(s). These are Clear On + * Write. + */ + Carry1.value = readl(&pAdapter->CSRAddress->macStat.Carry1.value); + Carry2.value = readl(&pAdapter->CSRAddress->macStat.Carry2.value); + + writel(Carry1.value, &pAdapter->CSRAddress->macStat.Carry1.value); + writel(Carry2.value, &pAdapter->CSRAddress->macStat.Carry2.value); + + /* We need to do update the host copy of all the MAC_STAT counters. + * For each counter, check it's overflow bit. If the overflow bit is + * set, then increment the host version of the count by one complete + * revolution of the counter. This routine is called when the counter + * block indicates that one of the counters has wrapped. + */ + if (Carry1.bits.rfcs) { + pAdapter->Stats.code_violations += COUNTER_WRAP_16_BIT; + } + if (Carry1.bits.raln) { + pAdapter->Stats.alignment_err += COUNTER_WRAP_12_BIT; + } + if (Carry1.bits.rflr) { + pAdapter->Stats.length_err += COUNTER_WRAP_16_BIT; + } + if (Carry1.bits.rfrg) { + pAdapter->Stats.other_errors += COUNTER_WRAP_16_BIT; + } + if (Carry1.bits.rcde) { + pAdapter->Stats.crc_err += COUNTER_WRAP_16_BIT; + } + if (Carry1.bits.rovr) { + pAdapter->Stats.rx_ov_flow += COUNTER_WRAP_16_BIT; + } + if (Carry1.bits.rdrp) { + pAdapter->Stats.norcvbuf += COUNTER_WRAP_16_BIT; + } + if (Carry2.bits.tovr) { + pAdapter->Stats.max_pkt_error += COUNTER_WRAP_12_BIT; + } + if (Carry2.bits.tund) { + pAdapter->Stats.tx_uflo += COUNTER_WRAP_12_BIT; + } + if (Carry2.bits.tscl) { + pAdapter->Stats.first_collision += COUNTER_WRAP_12_BIT; + } + if (Carry2.bits.tdfr) { + pAdapter->Stats.tx_deferred += COUNTER_WRAP_12_BIT; + } + if (Carry2.bits.tmcl) { + pAdapter->Stats.excessive_collisions += COUNTER_WRAP_12_BIT; + } + if (Carry2.bits.tlcl) { + pAdapter->Stats.late_collisions += COUNTER_WRAP_12_BIT; + } + if (Carry2.bits.tncl) { + pAdapter->Stats.collisions += COUNTER_WRAP_12_BIT; + } + + DBG_LEAVE(et131x_dbginfo); +} + +void SetupDeviceForMulticast(struct et131x_adapter *pAdapter) +{ + struct _RXMAC_t __iomem *rxmac = &pAdapter->CSRAddress->rxmac; + uint32_t nIndex; + uint32_t result; + uint32_t hash1 = 0; + uint32_t hash2 = 0; + uint32_t hash3 = 0; + uint32_t hash4 = 0; + PM_CSR_t pm_csr; + + DBG_ENTER(et131x_dbginfo); + + /* If ET131X_PACKET_TYPE_MULTICAST is specified, then we provision + * the multi-cast LIST. If it is NOT specified, (and "ALL" is not + * specified) then we should pass NO multi-cast addresses to the + * driver. + */ + if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_MULTICAST) { + DBG_VERBOSE(et131x_dbginfo, + "MULTICAST flag is set, MCCount: %d\n", + pAdapter->MCAddressCount); + + /* Loop through our multicast array and set up the device */ + for (nIndex = 0; nIndex < pAdapter->MCAddressCount; nIndex++) { + DBG_VERBOSE(et131x_dbginfo, + "MCList[%d]: %02x:%02x:%02x:%02x:%02x:%02x\n", + nIndex, + pAdapter->MCList[nIndex][0], + pAdapter->MCList[nIndex][1], + pAdapter->MCList[nIndex][2], + pAdapter->MCList[nIndex][3], + pAdapter->MCList[nIndex][4], + pAdapter->MCList[nIndex][5]); + + result = ether_crc(6, pAdapter->MCList[nIndex]); + + result = (result & 0x3F800000) >> 23; + + if (result < 32) { + hash1 |= (1 << result); + } else if ((31 < result) && (result < 64)) { + result -= 32; + hash2 |= (1 << result); + } else if ((63 < result) && (result < 96)) { + result -= 64; + hash3 |= (1 << result); + } else { + result -= 96; + hash4 |= (1 << result); + } + } + } + + /* Write out the new hash to the device */ + pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + if (pm_csr.bits.pm_phy_sw_coma == 0) { + writel(hash1, &rxmac->multi_hash1); + writel(hash2, &rxmac->multi_hash2); + writel(hash3, &rxmac->multi_hash3); + writel(hash4, &rxmac->multi_hash4); + } + + DBG_LEAVE(et131x_dbginfo); +} + +void SetupDeviceForUnicast(struct et131x_adapter *pAdapter) +{ + struct _RXMAC_t __iomem *rxmac = &pAdapter->CSRAddress->rxmac; + RXMAC_UNI_PF_ADDR1_t uni_pf1; + RXMAC_UNI_PF_ADDR2_t uni_pf2; + RXMAC_UNI_PF_ADDR3_t uni_pf3; + PM_CSR_t pm_csr; + + DBG_ENTER(et131x_dbginfo); + + /* Set up unicast packet filter reg 3 to be the first two octets of + * the MAC address for both address + * + * Set up unicast packet filter reg 2 to be the octets 2 - 5 of the + * MAC address for second address + * + * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the + * MAC address for first address + */ + uni_pf3.bits.addr1_1 = pAdapter->CurrentAddress[0]; + uni_pf3.bits.addr1_2 = pAdapter->CurrentAddress[1]; + uni_pf3.bits.addr2_1 = pAdapter->CurrentAddress[0]; + uni_pf3.bits.addr2_2 = pAdapter->CurrentAddress[1]; + + uni_pf2.bits.addr2_3 = pAdapter->CurrentAddress[2]; + uni_pf2.bits.addr2_4 = pAdapter->CurrentAddress[3]; + uni_pf2.bits.addr2_5 = pAdapter->CurrentAddress[4]; + uni_pf2.bits.addr2_6 = pAdapter->CurrentAddress[5]; + + uni_pf1.bits.addr1_3 = pAdapter->CurrentAddress[2]; + uni_pf1.bits.addr1_4 = pAdapter->CurrentAddress[3]; + uni_pf1.bits.addr1_5 = pAdapter->CurrentAddress[4]; + uni_pf1.bits.addr1_6 = pAdapter->CurrentAddress[5]; + + pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + if (pm_csr.bits.pm_phy_sw_coma == 0) { + writel(uni_pf1.value, &rxmac->uni_pf_addr1.value); + writel(uni_pf2.value, &rxmac->uni_pf_addr2.value); + writel(uni_pf3.value, &rxmac->uni_pf_addr3.value); + } + + DBG_LEAVE(et131x_dbginfo); +} diff --git a/drivers/staging/et131x/et1310_mac.h b/drivers/staging/et131x/et1310_mac.h new file mode 100644 index 000000000000..bd26cd351780 --- /dev/null +++ b/drivers/staging/et131x/et1310_mac.h @@ -0,0 +1,93 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_mac.h - Defines, structs, enums, prototypes, etc. pertaining to the + * MAC. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef _ET1310_MAC_H_ +#define _ET1310_MAC_H_ + + +#include "et1310_address_map.h" + + +#define COUNTER_WRAP_28_BIT 0x10000000 +#define COUNTER_WRAP_22_BIT 0x400000 +#define COUNTER_WRAP_16_BIT 0x10000 +#define COUNTER_WRAP_12_BIT 0x1000 + +#define COUNTER_MASK_28_BIT (COUNTER_WRAP_28_BIT - 1) +#define COUNTER_MASK_22_BIT (COUNTER_WRAP_22_BIT - 1) +#define COUNTER_MASK_16_BIT (COUNTER_WRAP_16_BIT - 1) +#define COUNTER_MASK_12_BIT (COUNTER_WRAP_12_BIT - 1) + +#define UPDATE_COUNTER(HostCnt,DevCnt) \ + HostCnt = HostCnt + DevCnt; + +/* Forward declaration of the private adapter structure */ +struct et131x_adapter; + +void ConfigMACRegs1(struct et131x_adapter *adapter); +void ConfigMACRegs2(struct et131x_adapter *adapter); +void ConfigRxMacRegs(struct et131x_adapter *adapter); +void ConfigTxMacRegs(struct et131x_adapter *adapter); +void ConfigMacStatRegs(struct et131x_adapter *adapter); +void ConfigFlowControl(struct et131x_adapter *adapter); +void UpdateMacStatHostCounters(struct et131x_adapter *adapter); +void HandleMacStatInterrupt(struct et131x_adapter *adapter); +void SetupDeviceForMulticast(struct et131x_adapter *adapter); +void SetupDeviceForUnicast(struct et131x_adapter *adapter); + +#endif /* _ET1310_MAC_H_ */ diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c new file mode 100644 index 000000000000..6c4fa54419ea --- /dev/null +++ b/drivers/staging/et131x/et1310_phy.c @@ -0,0 +1,1281 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_phy.c - Routines for configuring and accessing the PHY + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#include "et131x_version.h" +#include "et131x_debug.h" +#include "et131x_defs.h" + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/bitops.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/random.h> +#include <linux/delay.h> + +#include "et1310_phy.h" +#include "et1310_pm.h" +#include "et1310_jagcore.h" + +#include "et131x_adapter.h" +#include "et131x_netdev.h" +#include "et131x_initpci.h" + +#include "et1310_address_map.h" +#include "et1310_jagcore.h" +#include "et1310_tx.h" +#include "et1310_rx.h" +#include "et1310_mac.h" + +/* Data for debugging facilities */ +#ifdef CONFIG_ET131X_DEBUG +extern dbg_info_t *et131x_dbginfo; +#endif /* CONFIG_ET131X_DEBUG */ + +/* Prototypes for functions with local scope */ +static int et131x_xcvr_init(struct et131x_adapter *adapter); + +/** + * PhyMiRead - Read from the PHY through the MII Interface on the MAC + * @adapter: pointer to our private adapter structure + * @xcvrAddr: the address of the transciever + * @xcvrReg: the register to read + * @value: pointer to a 16-bit value in which the value will be stored + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +int PhyMiRead(struct et131x_adapter *adapter, uint8_t xcvrAddr, + uint8_t xcvrReg, uint16_t *value) +{ + struct _MAC_t __iomem *mac = &adapter->CSRAddress->mac; + int status = 0; + uint32_t delay; + MII_MGMT_ADDR_t miiAddr; + MII_MGMT_CMD_t miiCmd; + MII_MGMT_INDICATOR_t miiIndicator; + + /* Save a local copy of the registers we are dealing with so we can + * set them back + */ + miiAddr.value = readl(&mac->mii_mgmt_addr.value); + miiCmd.value = readl(&mac->mii_mgmt_cmd.value); + + /* Stop the current operation */ + writel(0, &mac->mii_mgmt_cmd.value); + + /* Set up the register we need to read from on the correct PHY */ + { + MII_MGMT_ADDR_t mii_mgmt_addr = { 0 }; + + mii_mgmt_addr.bits.phy_addr = xcvrAddr; + mii_mgmt_addr.bits.reg_addr = xcvrReg; + writel(mii_mgmt_addr.value, &mac->mii_mgmt_addr.value); + } + + /* Kick the read cycle off */ + delay = 0; + + writel(0x1, &mac->mii_mgmt_cmd.value); + + do { + udelay(50); + delay++; + miiIndicator.value = readl(&mac->mii_mgmt_indicator.value); + } while ((miiIndicator.bits.not_valid || miiIndicator.bits.busy) && + delay < 50); + + /* If we hit the max delay, we could not read the register */ + if (delay >= 50) { + DBG_WARNING(et131x_dbginfo, + "xcvrReg 0x%08x could not be read\n", xcvrReg); + DBG_WARNING(et131x_dbginfo, "status is 0x%08x\n", + miiIndicator.value); + + status = -EIO; + } + + /* If we hit here we were able to read the register and we need to + * return the value to the caller + */ + /* TODO: make this stuff a simple readw()?! */ + { + MII_MGMT_STAT_t mii_mgmt_stat; + + mii_mgmt_stat.value = readl(&mac->mii_mgmt_stat.value); + *value = (uint16_t) mii_mgmt_stat.bits.phy_stat; + } + + /* Stop the read operation */ + writel(0, &mac->mii_mgmt_cmd.value); + + DBG_VERBOSE(et131x_dbginfo, " xcvr_addr = 0x%02x, " + "xcvr_reg = 0x%02x, " + "value = 0x%04x.\n", xcvrAddr, xcvrReg, *value); + + /* set the registers we touched back to the state at which we entered + * this function + */ + writel(miiAddr.value, &mac->mii_mgmt_addr.value); + writel(miiCmd.value, &mac->mii_mgmt_cmd.value); + + return status; +} + +/** + * MiWrite - Write to a PHY register through the MII interface of the MAC + * @adapter: pointer to our private adapter structure + * @xcvrReg: the register to read + * @value: 16-bit value to write + * + * Return 0 on success, errno on failure (as defined in errno.h) + */ +int MiWrite(struct et131x_adapter *adapter, uint8_t xcvrReg, uint16_t value) +{ + struct _MAC_t __iomem *mac = &adapter->CSRAddress->mac; + int status = 0; + uint8_t xcvrAddr = adapter->Stats.xcvr_addr; + uint32_t delay; + MII_MGMT_ADDR_t miiAddr; + MII_MGMT_CMD_t miiCmd; + MII_MGMT_INDICATOR_t miiIndicator; + + /* Save a local copy of the registers we are dealing with so we can + * set them back + */ + miiAddr.value = readl(&mac->mii_mgmt_addr.value); + miiCmd.value = readl(&mac->mii_mgmt_cmd.value); + + /* Stop the current operation */ + writel(0, &mac->mii_mgmt_cmd.value); + + /* Set up the register we need to write to on the correct PHY */ + { + MII_MGMT_ADDR_t mii_mgmt_addr; + + mii_mgmt_addr.bits.phy_addr = xcvrAddr; + mii_mgmt_addr.bits.reg_addr = xcvrReg; + writel(mii_mgmt_addr.value, &mac->mii_mgmt_addr.value); + } + + /* Add the value to write to the registers to the mac */ + writel(value, &mac->mii_mgmt_ctrl.value); + delay = 0; + + do { + udelay(50); + delay++; + miiIndicator.value = readl(&mac->mii_mgmt_indicator.value); + } while (miiIndicator.bits.busy && delay < 100); + + /* If we hit the max delay, we could not write the register */ + if (delay == 100) { + uint16_t TempValue; + + DBG_WARNING(et131x_dbginfo, + "xcvrReg 0x%08x could not be written", xcvrReg); + DBG_WARNING(et131x_dbginfo, "status is 0x%08x\n", + miiIndicator.value); + DBG_WARNING(et131x_dbginfo, "command is 0x%08x\n", + readl(&mac->mii_mgmt_cmd.value)); + + MiRead(adapter, xcvrReg, &TempValue); + + status = -EIO; + } + + /* Stop the write operation */ + writel(0, &mac->mii_mgmt_cmd.value); + + /* set the registers we touched back to the state at which we entered + * this function + */ + writel(miiAddr.value, &mac->mii_mgmt_addr.value); + writel(miiCmd.value, &mac->mii_mgmt_cmd.value); + + DBG_VERBOSE(et131x_dbginfo, " xcvr_addr = 0x%02x, " + "xcvr_reg = 0x%02x, " + "value = 0x%04x.\n", xcvrAddr, xcvrReg, value); + + return status; +} + +/** + * et131x_xcvr_find - Find the PHY ID + * @adapter: pointer to our private adapter structure + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +int et131x_xcvr_find(struct et131x_adapter *adapter) +{ + int status = -ENODEV; + uint8_t xcvr_addr; + MI_IDR1_t idr1; + MI_IDR2_t idr2; + uint32_t xcvr_id; + + DBG_ENTER(et131x_dbginfo); + + /* We need to get xcvr id and address we just get the first one */ + for (xcvr_addr = 0; xcvr_addr < 32; xcvr_addr++) { + /* Read the ID from the PHY */ + PhyMiRead(adapter, xcvr_addr, + (uint8_t) offsetof(MI_REGS_t, idr1), + &idr1.value); + PhyMiRead(adapter, xcvr_addr, + (uint8_t) offsetof(MI_REGS_t, idr2), + &idr2.value); + + xcvr_id = (uint32_t) ((idr1.value << 16) | idr2.value); + + if ((idr1.value != 0) && (idr1.value != 0xffff)) { + DBG_TRACE(et131x_dbginfo, + "Xcvr addr: 0x%02x\tXcvr_id: 0x%08x\n", + xcvr_addr, xcvr_id); + + adapter->Stats.xcvr_id = xcvr_id; + adapter->Stats.xcvr_addr = xcvr_addr; + + status = 0; + break; + } + } + + DBG_LEAVE(et131x_dbginfo); + return status; +} + +/** + * et131x_setphy_normal - Set PHY for normal operation. + * @adapter: pointer to our private adapter structure + * + * Used by Power Management to force the PHY into 10 Base T half-duplex mode, + * when going to D3 in WOL mode. Also used during initialization to set the + * PHY for normal operation. + */ +int et131x_setphy_normal(struct et131x_adapter *adapter) +{ + int status; + + DBG_ENTER(et131x_dbginfo); + + /* Make sure the PHY is powered up */ + ET1310_PhyPowerDown(adapter, 0); + status = et131x_xcvr_init(adapter); + + DBG_LEAVE(et131x_dbginfo); + return status; +} + +/** + * et131x_xcvr_init - Init the phy if we are setting it into force mode + * @adapter: pointer to our private adapter structure + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +static int et131x_xcvr_init(struct et131x_adapter *adapter) +{ + int status = 0; + MI_IMR_t imr; + MI_ISR_t isr; + MI_LCR2_t lcr2; + + DBG_ENTER(et131x_dbginfo); + + /* Zero out the adapter structure variable representing BMSR */ + adapter->Bmsr.value = 0; + + MiRead(adapter, (uint8_t) offsetof(MI_REGS_t, isr), &isr.value); + + MiRead(adapter, (uint8_t) offsetof(MI_REGS_t, imr), &imr.value); + + /* Set the link status interrupt only. Bad behavior when link status + * and auto neg are set, we run into a nested interrupt problem + */ + imr.bits.int_en = 0x1; + imr.bits.link_status = 0x1; + imr.bits.autoneg_status = 0x1; + + MiWrite(adapter, (uint8_t) offsetof(MI_REGS_t, imr), imr.value); + + /* Set the LED behavior such that LED 1 indicates speed (off = + * 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates + * link and activity (on for link, blink off for activity). + * + * NOTE: Some customizations have been added here for specific + * vendors; The LED behavior is now determined by vendor data in the + * EEPROM. However, the above description is the default. + */ + if ((adapter->eepromData[1] & 0x4) == 0) { + MiRead(adapter, (uint8_t) offsetof(MI_REGS_t, lcr2), + &lcr2.value); + if ((adapter->eepromData[1] & 0x8) == 0) + lcr2.bits.led_tx_rx = 0x3; + else + lcr2.bits.led_tx_rx = 0x4; + lcr2.bits.led_link = 0xa; + MiWrite(adapter, (uint8_t) offsetof(MI_REGS_t, lcr2), + lcr2.value); + } + + /* Determine if we need to go into a force mode and set it */ + if (adapter->AiForceSpeed == 0 && adapter->AiForceDpx == 0) { + if ((adapter->RegistryFlowControl == TxOnly) || + (adapter->RegistryFlowControl == Both)) { + ET1310_PhyAccessMiBit(adapter, + TRUEPHY_BIT_SET, 4, 11, NULL); + } else { + ET1310_PhyAccessMiBit(adapter, + TRUEPHY_BIT_CLEAR, 4, 11, NULL); + } + + if (adapter->RegistryFlowControl == Both) { + ET1310_PhyAccessMiBit(adapter, + TRUEPHY_BIT_SET, 4, 10, NULL); + } else { + ET1310_PhyAccessMiBit(adapter, + TRUEPHY_BIT_CLEAR, 4, 10, NULL); + } + + /* Set the phy to autonegotiation */ + ET1310_PhyAutoNeg(adapter, true); + + /* NOTE - Do we need this? */ + ET1310_PhyAccessMiBit(adapter, TRUEPHY_BIT_SET, 0, 9, NULL); + + DBG_LEAVE(et131x_dbginfo); + return status; + } else { + ET1310_PhyAutoNeg(adapter, false); + + /* Set to the correct force mode. */ + if (adapter->AiForceDpx != 1) { + if ((adapter->RegistryFlowControl == TxOnly) || + (adapter->RegistryFlowControl == Both)) { + ET1310_PhyAccessMiBit(adapter, + TRUEPHY_BIT_SET, 4, 11, + NULL); + } else { + ET1310_PhyAccessMiBit(adapter, + TRUEPHY_BIT_CLEAR, 4, 11, + NULL); + } + + if (adapter->RegistryFlowControl == Both) { + ET1310_PhyAccessMiBit(adapter, + TRUEPHY_BIT_SET, 4, 10, + NULL); + } else { + ET1310_PhyAccessMiBit(adapter, + TRUEPHY_BIT_CLEAR, 4, 10, + NULL); + } + } else { + ET1310_PhyAccessMiBit(adapter, + TRUEPHY_BIT_CLEAR, 4, 10, NULL); + ET1310_PhyAccessMiBit(adapter, + TRUEPHY_BIT_CLEAR, 4, 11, NULL); + } + + switch (adapter->AiForceSpeed) { + case 10: + if (adapter->AiForceDpx == 1) { + TPAL_SetPhy10HalfDuplex(adapter); + } else if (adapter->AiForceDpx == 2) { + TPAL_SetPhy10FullDuplex(adapter); + } else { + TPAL_SetPhy10Force(adapter); + } + break; + case 100: + if (adapter->AiForceDpx == 1) { + TPAL_SetPhy100HalfDuplex(adapter); + } else if (adapter->AiForceDpx == 2) { + TPAL_SetPhy100FullDuplex(adapter); + } else { + TPAL_SetPhy100Force(adapter); + } + break; + case 1000: + TPAL_SetPhy1000FullDuplex(adapter); + break; + } + + DBG_LEAVE(et131x_dbginfo); + return status; + } +} + +void et131x_Mii_check(struct et131x_adapter *pAdapter, + MI_BMSR_t bmsr, MI_BMSR_t bmsr_ints) +{ + uint8_t ucLinkStatus; + uint32_t uiAutoNegStatus; + uint32_t uiSpeed; + uint32_t uiDuplex; + uint32_t uiMdiMdix; + uint32_t uiMasterSlave; + uint32_t uiPolarity; + unsigned long lockflags; + + DBG_ENTER(et131x_dbginfo); + + if (bmsr_ints.bits.link_status) { + if (bmsr.bits.link_status) { + pAdapter->PoMgmt.TransPhyComaModeOnBoot = 20; + + /* Update our state variables and indicate the + * connected state + */ + spin_lock_irqsave(&pAdapter->Lock, lockflags); + + pAdapter->MediaState = NETIF_STATUS_MEDIA_CONNECT; + MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION); + + spin_unlock_irqrestore(&pAdapter->Lock, lockflags); + + /* Don't indicate state if we're in loopback mode */ + if (pAdapter->RegistryPhyLoopbk == false) { + netif_carrier_on(pAdapter->netdev); + } + } else { + DBG_WARNING(et131x_dbginfo, + "Link down cable problem\n"); + + if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS) { + // NOTE - Is there a way to query this without TruePHY? + // && TRU_QueryCoreType(pAdapter->hTruePhy, 0) == EMI_TRUEPHY_A13O) { + uint16_t Register18; + + MiRead(pAdapter, 0x12, &Register18); + MiWrite(pAdapter, 0x12, Register18 | 0x4); + MiWrite(pAdapter, 0x10, Register18 | 0x8402); + MiWrite(pAdapter, 0x11, Register18 | 511); + MiWrite(pAdapter, 0x12, Register18); + } + + /* For the first N seconds of life, we are in "link + * detection" When we are in this state, we should + * only report "connected". When the LinkDetection + * Timer expires, we can report disconnected (handled + * in the LinkDetectionDPC). + */ + if ((MP_IS_FLAG_CLEAR + (pAdapter, fMP_ADAPTER_LINK_DETECTION)) + || (pAdapter->MediaState == + NETIF_STATUS_MEDIA_DISCONNECT)) { + spin_lock_irqsave(&pAdapter->Lock, lockflags); + pAdapter->MediaState = + NETIF_STATUS_MEDIA_DISCONNECT; + spin_unlock_irqrestore(&pAdapter->Lock, + lockflags); + + /* Only indicate state if we're in loopback + * mode + */ + if (pAdapter->RegistryPhyLoopbk == false) { + netif_carrier_off(pAdapter->netdev); + } + } + + pAdapter->uiLinkSpeed = 0; + pAdapter->uiDuplexMode = 0; + + /* Free the packets being actively sent & stopped */ + et131x_free_busy_send_packets(pAdapter); + + /* Re-initialize the send structures */ + et131x_init_send(pAdapter); + + /* Reset the RFD list and re-start RU */ + et131x_reset_recv(pAdapter); + + /* + * Bring the device back to the state it was during + * init prior to autonegotiation being complete. This + * way, when we get the auto-neg complete interrupt, + * we can complete init by calling ConfigMacREGS2. + */ + et131x_soft_reset(pAdapter); + + /* Setup ET1310 as per the documentation */ + et131x_adapter_setup(pAdapter); + + /* Setup the PHY into coma mode until the cable is + * plugged back in + */ + if (pAdapter->RegistryPhyComa == 1) { + EnablePhyComa(pAdapter); + } + } + } + + if (bmsr_ints.bits.auto_neg_complete || + ((pAdapter->AiForceDpx == 3) && (bmsr_ints.bits.link_status))) { + if (bmsr.bits.auto_neg_complete || (pAdapter->AiForceDpx == 3)) { + ET1310_PhyLinkStatus(pAdapter, + &ucLinkStatus, &uiAutoNegStatus, + &uiSpeed, &uiDuplex, &uiMdiMdix, + &uiMasterSlave, &uiPolarity); + + pAdapter->uiLinkSpeed = uiSpeed; + pAdapter->uiDuplexMode = uiDuplex; + + DBG_TRACE(et131x_dbginfo, + "pAdapter->uiLinkSpeed 0x%04x, pAdapter->uiDuplex 0x%08x\n", + pAdapter->uiLinkSpeed, + pAdapter->uiDuplexMode); + + pAdapter->PoMgmt.TransPhyComaModeOnBoot = 20; + + if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS) { + // NOTE - Is there a way to query this without TruePHY? + // && TRU_QueryCoreType(pAdapter->hTruePhy, 0) == EMI_TRUEPHY_A13O) { + uint16_t Register18; + + MiRead(pAdapter, 0x12, &Register18); + MiWrite(pAdapter, 0x12, Register18 | 0x4); + MiWrite(pAdapter, 0x10, Register18 | 0x8402); + MiWrite(pAdapter, 0x11, Register18 | 511); + MiWrite(pAdapter, 0x12, Register18); + } + + ConfigFlowControl(pAdapter); + + if ((pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) && + (pAdapter->RegistryJumboPacket > 2048)) + { + ET1310_PhyAndOrReg(pAdapter, 0x16, 0xcfff, + 0x2000); + } + + SetRxDmaTimer(pAdapter); + ConfigMACRegs2(pAdapter); + } + } + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * TPAL_SetPhy10HalfDuplex - Force the phy into 10 Base T Half Duplex mode. + * @pAdapter: pointer to the adapter structure + * + * Also sets the MAC so it is syncd up properly + */ +void TPAL_SetPhy10HalfDuplex(struct et131x_adapter *pAdapter) +{ + DBG_ENTER(et131x_dbginfo); + + /* Power down PHY */ + ET1310_PhyPowerDown(pAdapter, 1); + + /* First we need to turn off all other advertisement */ + ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + + ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + + /* Set our advertise values accordingly */ + ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_HALF); + + /* Power up PHY */ + ET1310_PhyPowerDown(pAdapter, 0); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * TPAL_SetPhy10FullDuplex - Force the phy into 10 Base T Full Duplex mode. + * @pAdapter: pointer to the adapter structure + * + * Also sets the MAC so it is syncd up properly + */ +void TPAL_SetPhy10FullDuplex(struct et131x_adapter *pAdapter) +{ + DBG_ENTER(et131x_dbginfo); + + /* Power down PHY */ + ET1310_PhyPowerDown(pAdapter, 1); + + /* First we need to turn off all other advertisement */ + ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + + ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + + /* Set our advertise values accordingly */ + ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + + /* Power up PHY */ + ET1310_PhyPowerDown(pAdapter, 0); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * TPAL_SetPhy10Force - Force Base-T FD mode WITHOUT using autonegotiation + * @pAdapter: pointer to the adapter structure + */ +void TPAL_SetPhy10Force(struct et131x_adapter *pAdapter) +{ + DBG_ENTER(et131x_dbginfo); + + /* Power down PHY */ + ET1310_PhyPowerDown(pAdapter, 1); + + /* Disable autoneg */ + ET1310_PhyAutoNeg(pAdapter, false); + + /* Disable all advertisement */ + ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + + /* Force 10 Mbps */ + ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_10MBPS); + + /* Force Full duplex */ + ET1310_PhyDuplexMode(pAdapter, TRUEPHY_DUPLEX_FULL); + + /* Power up PHY */ + ET1310_PhyPowerDown(pAdapter, 0); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * TPAL_SetPhy100HalfDuplex - Force 100 Base T Half Duplex mode. + * @pAdapter: pointer to the adapter structure + * + * Also sets the MAC so it is syncd up properly. + */ +void TPAL_SetPhy100HalfDuplex(struct et131x_adapter *pAdapter) +{ + DBG_ENTER(et131x_dbginfo); + + /* Power down PHY */ + ET1310_PhyPowerDown(pAdapter, 1); + + /* first we need to turn off all other advertisement */ + ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + + ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + + /* Set our advertise values accordingly */ + ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_HALF); + + /* Set speed */ + ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_100MBPS); + + /* Power up PHY */ + ET1310_PhyPowerDown(pAdapter, 0); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * TPAL_SetPhy100FullDuplex - Force 100 Base T Full Duplex mode. + * @pAdapter: pointer to the adapter structure + * + * Also sets the MAC so it is syncd up properly + */ +void TPAL_SetPhy100FullDuplex(struct et131x_adapter *pAdapter) +{ + DBG_ENTER(et131x_dbginfo); + + /* Power down PHY */ + ET1310_PhyPowerDown(pAdapter, 1); + + /* First we need to turn off all other advertisement */ + ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + + ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + + /* Set our advertise values accordingly */ + ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + + /* Power up PHY */ + ET1310_PhyPowerDown(pAdapter, 0); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * TPAL_SetPhy100Force - Force 100 BaseT FD mode WITHOUT using autonegotiation + * @pAdapter: pointer to the adapter structure + */ +void TPAL_SetPhy100Force(struct et131x_adapter *pAdapter) +{ + DBG_ENTER(et131x_dbginfo); + + /* Power down PHY */ + ET1310_PhyPowerDown(pAdapter, 1); + + /* Disable autoneg */ + ET1310_PhyAutoNeg(pAdapter, false); + + /* Disable all advertisement */ + ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + + /* Force 100 Mbps */ + ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_100MBPS); + + /* Force Full duplex */ + ET1310_PhyDuplexMode(pAdapter, TRUEPHY_DUPLEX_FULL); + + /* Power up PHY */ + ET1310_PhyPowerDown(pAdapter, 0); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * TPAL_SetPhy1000FullDuplex - Force 1000 Base T Full Duplex mode + * @pAdapter: pointer to the adapter structure + * + * Also sets the MAC so it is syncd up properly. + */ +void TPAL_SetPhy1000FullDuplex(struct et131x_adapter *pAdapter) +{ + DBG_ENTER(et131x_dbginfo); + + /* Power down PHY */ + ET1310_PhyPowerDown(pAdapter, 1); + + /* first we need to turn off all other advertisement */ + ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + + ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + + /* set our advertise values accordingly */ + ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + + /* power up PHY */ + ET1310_PhyPowerDown(pAdapter, 0); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * TPAL_SetPhyAutoNeg - Set phy to autonegotiation mode. + * @pAdapter: pointer to the adapter structure + */ +void TPAL_SetPhyAutoNeg(struct et131x_adapter *pAdapter) +{ + DBG_ENTER(et131x_dbginfo); + + /* Power down PHY */ + ET1310_PhyPowerDown(pAdapter, 1); + + /* Turn on advertisement of all capabilities */ + ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_BOTH); + + ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_BOTH); + + if (pAdapter->DeviceID != ET131X_PCI_DEVICE_ID_FAST) { + ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + } else { + ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + } + + /* Make sure auto-neg is ON (it is disabled in FORCE modes) */ + ET1310_PhyAutoNeg(pAdapter, true); + + /* Power up PHY */ + ET1310_PhyPowerDown(pAdapter, 0); + + DBG_LEAVE(et131x_dbginfo); +} + + +/* + * The routines which follow provide low-level access to the PHY, and are used + * primarily by the routines above (although there are a few places elsewhere + * in the driver where this level of access is required). + */ + +static const uint16_t ConfigPhy[25][2] = { + /* Reg Value Register */ + /* Addr */ + {0x880B, 0x0926}, /* AfeIfCreg4B1000Msbs */ + {0x880C, 0x0926}, /* AfeIfCreg4B100Msbs */ + {0x880D, 0x0926}, /* AfeIfCreg4B10Msbs */ + + {0x880E, 0xB4D3}, /* AfeIfCreg4B1000Lsbs */ + {0x880F, 0xB4D3}, /* AfeIfCreg4B100Lsbs */ + {0x8810, 0xB4D3}, /* AfeIfCreg4B10Lsbs */ + + {0x8805, 0xB03E}, /* AfeIfCreg3B1000Msbs */ + {0x8806, 0xB03E}, /* AfeIfCreg3B100Msbs */ + {0x8807, 0xFF00}, /* AfeIfCreg3B10Msbs */ + + {0x8808, 0xE090}, /* AfeIfCreg3B1000Lsbs */ + {0x8809, 0xE110}, /* AfeIfCreg3B100Lsbs */ + {0x880A, 0x0000}, /* AfeIfCreg3B10Lsbs */ + + {0x300D, 1}, /* DisableNorm */ + + {0x280C, 0x0180}, /* LinkHoldEnd */ + + {0x1C21, 0x0002}, /* AlphaM */ + + {0x3821, 6}, /* FfeLkgTx0 */ + {0x381D, 1}, /* FfeLkg1g4 */ + {0x381E, 1}, /* FfeLkg1g5 */ + {0x381F, 1}, /* FfeLkg1g6 */ + {0x3820, 1}, /* FfeLkg1g7 */ + + {0x8402, 0x01F0}, /* Btinact */ + {0x800E, 20}, /* LftrainTime */ + {0x800F, 24}, /* DvguardTime */ + {0x8010, 46}, /* IdlguardTime */ + + {0, 0} + +}; + +/* condensed version of the phy initialization routine */ +void ET1310_PhyInit(struct et131x_adapter *pAdapter) +{ + uint16_t usData, usIndex; + + if (pAdapter == NULL) { + return; + } + + // get the identity (again ?) + MiRead(pAdapter, PHY_ID_1, &usData); + MiRead(pAdapter, PHY_ID_2, &usData); + + // what does this do/achieve ? + MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); // should read 0002 + MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0006); + + // read modem register 0402, should I do something with the return data ? + MiWrite(pAdapter, PHY_INDEX_REG, 0x0402); + MiRead(pAdapter, PHY_DATA_REG, &usData); + + // what does this do/achieve ? + MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002); + + // get the identity (again ?) + MiRead(pAdapter, PHY_ID_1, &usData); + MiRead(pAdapter, PHY_ID_2, &usData); + + // what does this achieve ? + MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); // should read 0002 + MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0006); + + // read modem register 0402, should I do something with the return data? + MiWrite(pAdapter, PHY_INDEX_REG, 0x0402); + MiRead(pAdapter, PHY_DATA_REG, &usData); + + MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002); + + // what does this achieve (should return 0x1040) + MiRead(pAdapter, PHY_CONTROL, &usData); + MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); // should read 0002 + MiWrite(pAdapter, PHY_CONTROL, 0x1840); + + MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0007); + + // here the writing of the array starts.... + usIndex = 0; + while (ConfigPhy[usIndex][0] != 0x0000) { + // write value + MiWrite(pAdapter, PHY_INDEX_REG, ConfigPhy[usIndex][0]); + MiWrite(pAdapter, PHY_DATA_REG, ConfigPhy[usIndex][1]); + + // read it back + MiWrite(pAdapter, PHY_INDEX_REG, ConfigPhy[usIndex][0]); + MiRead(pAdapter, PHY_DATA_REG, &usData); + + // do a check on the value read back ? + usIndex++; + } + // here the writing of the array ends... + + MiRead(pAdapter, PHY_CONTROL, &usData); // 0x1840 + MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); // should read 0007 + MiWrite(pAdapter, PHY_CONTROL, 0x1040); + MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002); +} + +void ET1310_PhyReset(struct et131x_adapter *pAdapter) +{ + MiWrite(pAdapter, PHY_CONTROL, 0x8000); +} + +void ET1310_PhyPowerDown(struct et131x_adapter *pAdapter, bool down) +{ + uint16_t usData; + + MiRead(pAdapter, PHY_CONTROL, &usData); + + if (down == false) { + // Power UP + usData &= ~0x0800; + MiWrite(pAdapter, PHY_CONTROL, usData); + } else { + // Power DOWN + usData |= 0x0800; + MiWrite(pAdapter, PHY_CONTROL, usData); + } +} + +void ET1310_PhyAutoNeg(struct et131x_adapter *pAdapter, bool enable) +{ + uint16_t usData; + + MiRead(pAdapter, PHY_CONTROL, &usData); + + if (enable == true) { + // Autonegotiation ON + usData |= 0x1000; + MiWrite(pAdapter, PHY_CONTROL, usData); + } else { + // Autonegotiation OFF + usData &= ~0x1000; + MiWrite(pAdapter, PHY_CONTROL, usData); + } +} + +void ET1310_PhyDuplexMode(struct et131x_adapter *pAdapter, uint16_t duplex) +{ + uint16_t usData; + + MiRead(pAdapter, PHY_CONTROL, &usData); + + if (duplex == TRUEPHY_DUPLEX_FULL) { + // Set Full Duplex + usData |= 0x100; + MiWrite(pAdapter, PHY_CONTROL, usData); + } else { + // Set Half Duplex + usData &= ~0x100; + MiWrite(pAdapter, PHY_CONTROL, usData); + } +} + +void ET1310_PhySpeedSelect(struct et131x_adapter *pAdapter, uint16_t speed) +{ + uint16_t usData; + + // Read the PHY control register + MiRead(pAdapter, PHY_CONTROL, &usData); + + // Clear all Speed settings (Bits 6, 13) + usData &= ~0x2040; + + // Reset the speed bits based on user selection + switch (speed) { + case TRUEPHY_SPEED_10MBPS: + // Bits already cleared above, do nothing + break; + + case TRUEPHY_SPEED_100MBPS: + // 100M == Set bit 13 + usData |= 0x2000; + break; + + case TRUEPHY_SPEED_1000MBPS: + default: + usData |= 0x0040; + break; + } + + // Write back the new speed + MiWrite(pAdapter, PHY_CONTROL, usData); +} + +void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *pAdapter, + uint16_t duplex) +{ + uint16_t usData; + + // Read the PHY 1000 Base-T Control Register + MiRead(pAdapter, PHY_1000_CONTROL, &usData); + + // Clear Bits 8,9 + usData &= ~0x0300; + + switch (duplex) { + case TRUEPHY_ADV_DUPLEX_NONE: + // Duplex already cleared, do nothing + break; + + case TRUEPHY_ADV_DUPLEX_FULL: + // Set Bit 9 + usData |= 0x0200; + break; + + case TRUEPHY_ADV_DUPLEX_HALF: + // Set Bit 8 + usData |= 0x0100; + break; + + case TRUEPHY_ADV_DUPLEX_BOTH: + default: + usData |= 0x0300; + break; + } + + // Write back advertisement + MiWrite(pAdapter, PHY_1000_CONTROL, usData); +} + +void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *pAdapter, + uint16_t duplex) +{ + uint16_t usData; + + // Read the Autonegotiation Register (10/100) + MiRead(pAdapter, PHY_AUTO_ADVERTISEMENT, &usData); + + // Clear bits 7,8 + usData &= ~0x0180; + + switch (duplex) { + case TRUEPHY_ADV_DUPLEX_NONE: + // Duplex already cleared, do nothing + break; + + case TRUEPHY_ADV_DUPLEX_FULL: + // Set Bit 8 + usData |= 0x0100; + break; + + case TRUEPHY_ADV_DUPLEX_HALF: + // Set Bit 7 + usData |= 0x0080; + break; + + case TRUEPHY_ADV_DUPLEX_BOTH: + default: + // Set Bits 7,8 + usData |= 0x0180; + break; + } + + // Write back advertisement + MiWrite(pAdapter, PHY_AUTO_ADVERTISEMENT, usData); +} + +void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *pAdapter, + uint16_t duplex) +{ + uint16_t usData; + + // Read the Autonegotiation Register (10/100) + MiRead(pAdapter, PHY_AUTO_ADVERTISEMENT, &usData); + + // Clear bits 5,6 + usData &= ~0x0060; + + switch (duplex) { + case TRUEPHY_ADV_DUPLEX_NONE: + // Duplex already cleared, do nothing + break; + + case TRUEPHY_ADV_DUPLEX_FULL: + // Set Bit 6 + usData |= 0x0040; + break; + + case TRUEPHY_ADV_DUPLEX_HALF: + // Set Bit 5 + usData |= 0x0020; + break; + + case TRUEPHY_ADV_DUPLEX_BOTH: + default: + // Set Bits 5,6 + usData |= 0x0060; + break; + } + + // Write back advertisement + MiWrite(pAdapter, PHY_AUTO_ADVERTISEMENT, usData); +} + +void ET1310_PhyLinkStatus(struct et131x_adapter *pAdapter, + uint8_t *ucLinkStatus, + uint32_t *uiAutoNeg, + uint32_t *uiLinkSpeed, + uint32_t *uiDuplexMode, + uint32_t *uiMdiMdix, + uint32_t *uiMasterSlave, uint32_t *uiPolarity) +{ + uint16_t usMiStatus = 0; + uint16_t us1000BaseT = 0; + uint16_t usVmiPhyStatus = 0; + uint16_t usControl = 0; + + MiRead(pAdapter, PHY_STATUS, &usMiStatus); + MiRead(pAdapter, PHY_1000_STATUS, &us1000BaseT); + MiRead(pAdapter, PHY_PHY_STATUS, &usVmiPhyStatus); + MiRead(pAdapter, PHY_CONTROL, &usControl); + + if (ucLinkStatus) { + *ucLinkStatus = + (unsigned char)((usVmiPhyStatus & 0x0040) ? 1 : 0); + } + + if (uiAutoNeg) { + *uiAutoNeg = + (usControl & 0x1000) ? ((usVmiPhyStatus & 0x0020) ? + TRUEPHY_ANEG_COMPLETE : + TRUEPHY_ANEG_NOT_COMPLETE) : + TRUEPHY_ANEG_DISABLED; + } + + if (uiLinkSpeed) { + *uiLinkSpeed = (usVmiPhyStatus & 0x0300) >> 8; + } + + if (uiDuplexMode) { + *uiDuplexMode = (usVmiPhyStatus & 0x0080) >> 7; + } + + if (uiMdiMdix) { + /* NOTE: Need to complete this */ + *uiMdiMdix = 0; + } + + if (uiMasterSlave) { + *uiMasterSlave = + (us1000BaseT & 0x4000) ? TRUEPHY_CFG_MASTER : + TRUEPHY_CFG_SLAVE; + } + + if (uiPolarity) { + *uiPolarity = + (usVmiPhyStatus & 0x0400) ? TRUEPHY_POLARITY_INVERTED : + TRUEPHY_POLARITY_NORMAL; + } +} + +void ET1310_PhyAndOrReg(struct et131x_adapter *pAdapter, + uint16_t regnum, uint16_t andMask, uint16_t orMask) +{ + uint16_t reg; + + // Read the requested register + MiRead(pAdapter, regnum, ®); + + // Apply the AND mask + reg &= andMask; + + // Apply the OR mask + reg |= orMask; + + // Write the value back to the register + MiWrite(pAdapter, regnum, reg); +} + +void ET1310_PhyAccessMiBit(struct et131x_adapter *pAdapter, uint16_t action, + uint16_t regnum, uint16_t bitnum, uint8_t *value) +{ + uint16_t reg; + uint16_t mask = 0; + + // Create a mask to isolate the requested bit + mask = 0x0001 << bitnum; + + // Read the requested register + MiRead(pAdapter, regnum, ®); + + switch (action) { + case TRUEPHY_BIT_READ: + if (value != NULL) { + *value = (reg & mask) >> bitnum; + } + break; + + case TRUEPHY_BIT_SET: + reg |= mask; + MiWrite(pAdapter, regnum, reg); + break; + + case TRUEPHY_BIT_CLEAR: + reg &= ~mask; + MiWrite(pAdapter, regnum, reg); + break; + + default: + break; + } +} diff --git a/drivers/staging/et131x/et1310_phy.h b/drivers/staging/et131x/et1310_phy.h new file mode 100644 index 000000000000..d624cbbadbd7 --- /dev/null +++ b/drivers/staging/et131x/et1310_phy.h @@ -0,0 +1,910 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_phy.h - Defines, structs, enums, prototypes, etc. pertaining to the + * PHY. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef _ET1310_PHY_H_ +#define _ET1310_PHY_H_ + +#include "et1310_address_map.h" + +#define TRUEPHY_SUCCESS 0 +#define TRUEPHY_FAILURE 1 +typedef void *TRUEPHY_HANDLE; +typedef void *TRUEPHY_PLATFORM_HANDLE; +typedef void *TRUEPHY_OSAL_HANDLE; + +/* MI Register Addresses */ +#define MI_CONTROL_REG 0 +#define MI_STATUS_REG 1 +#define MI_PHY_IDENTIFIER_1_REG 2 +#define MI_PHY_IDENTIFIER_2_REG 3 +#define MI_AUTONEG_ADVERTISEMENT_REG 4 +#define MI_AUTONEG_LINK_PARTNER_ABILITY_REG 5 +#define MI_AUTONEG_EXPANSION_REG 6 +#define MI_AUTONEG_NEXT_PAGE_TRANSMIT_REG 7 +#define MI_LINK_PARTNER_NEXT_PAGE_REG 8 +#define MI_1000BASET_CONTROL_REG 9 +#define MI_1000BASET_STATUS_REG 10 +#define MI_RESERVED11_REG 11 +#define MI_RESERVED12_REG 12 +#define MI_RESERVED13_REG 13 +#define MI_RESERVED14_REG 14 +#define MI_EXTENDED_STATUS_REG 15 + +/* VMI Register Addresses */ +#define VMI_RESERVED16_REG 16 +#define VMI_RESERVED17_REG 17 +#define VMI_RESERVED18_REG 18 +#define VMI_LOOPBACK_CONTROL_REG 19 +#define VMI_RESERVED20_REG 20 +#define VMI_MI_CONTROL_REG 21 +#define VMI_PHY_CONFIGURATION_REG 22 +#define VMI_PHY_CONTROL_REG 23 +#define VMI_INTERRUPT_MASK_REG 24 +#define VMI_INTERRUPT_STATUS_REG 25 +#define VMI_PHY_STATUS_REG 26 +#define VMI_LED_CONTROL_1_REG 27 +#define VMI_LED_CONTROL_2_REG 28 +#define VMI_RESERVED29_REG 29 +#define VMI_RESERVED30_REG 30 +#define VMI_RESERVED31_REG 31 + +/* PHY Register Mapping(MI) Management Interface Regs */ +typedef struct _MI_REGS_t { + u8 bmcr; // Basic mode control reg(Reg 0x00) + u8 bmsr; // Basic mode status reg(Reg 0x01) + u8 idr1; // Phy identifier reg 1(Reg 0x02) + u8 idr2; // Phy identifier reg 2(Reg 0x03) + u8 anar; // Auto-Negotiation advertisement(Reg 0x04) + u8 anlpar; // Auto-Negotiation link Partner Ability(Reg 0x05) + u8 aner; // Auto-Negotiation expansion reg(Reg 0x06) + u8 annptr; // Auto-Negotiation next page transmit reg(Reg 0x07) + u8 lpnpr; // link partner next page reg(Reg 0x08) + u8 gcr; // Gigabit basic mode control reg(Reg 0x09) + u8 gsr; // Gigabit basic mode status reg(Reg 0x0A) + u8 mi_res1[4]; // Future use by MI working group(Reg 0x0B - 0x0E) + u8 esr; // Extended status reg(Reg 0x0F) + u8 mi_res2[3]; // Future use by MI working group(Reg 0x10 - 0x12) + u8 loop_ctl; // Loopback Control Reg(Reg 0x13) + u8 mi_res3; // Future use by MI working group(Reg 0x14) + u8 mcr; // MI Control Reg(Reg 0x15) + u8 pcr; // Configuration Reg(Reg 0x16) + u8 phy_ctl; // PHY Control Reg(Reg 0x17) + u8 imr; // Interrupt Mask Reg(Reg 0x18) + u8 isr; // Interrupt Status Reg(Reg 0x19) + u8 psr; // PHY Status Reg(Reg 0x1A) + u8 lcr1; // LED Control 1 Reg(Reg 0x1B) + u8 lcr2; // LED Control 2 Reg(Reg 0x1C) + u8 mi_res4[3]; // Future use by MI working group(Reg 0x1D - 0x1F) +} MI_REGS_t, *PMI_REGS_t; + +/* MI Register 0: Basic mode control register */ +typedef union _MI_BMCR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 reset:1; // bit 15 + u16 loopback:1; // bit 14 + u16 speed_sel:1; // bit 13 + u16 enable_autoneg:1; // bit 12 + u16 power_down:1; // bit 11 + u16 isolate:1; // bit 10 + u16 restart_autoneg:1; // bit 9 + u16 duplex_mode:1; // bit 8 + u16 col_test:1; // bit 7 + u16 speed_1000_sel:1; // bit 6 + u16 res1:6; // bits 0-5 +#else + u16 res1:6; // bits 0-5 + u16 speed_1000_sel:1; // bit 6 + u16 col_test:1; // bit 7 + u16 duplex_mode:1; // bit 8 + u16 restart_autoneg:1; // bit 9 + u16 isolate:1; // bit 10 + u16 power_down:1; // bit 11 + u16 enable_autoneg:1; // bit 12 + u16 speed_sel:1; // bit 13 + u16 loopback:1; // bit 14 + u16 reset:1; // bit 15 +#endif + } bits; +} MI_BMCR_t, *PMI_BMCR_t; + +/* MI Register 1: Basic mode status register */ +typedef union _MI_BMSR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 link_100T4:1; // bit 15 + u16 link_100fdx:1; // bit 14 + u16 link_100hdx:1; // bit 13 + u16 link_10fdx:1; // bit 12 + u16 link_10hdx:1; // bit 11 + u16 link_100T2fdx:1; // bit 10 + u16 link_100T2hdx:1; // bit 9 + u16 extend_status:1; // bit 8 + u16 res1:1; // bit 7 + u16 preamble_supress:1; // bit 6 + u16 auto_neg_complete:1; // bit 5 + u16 remote_fault:1; // bit 4 + u16 auto_neg_able:1; // bit 3 + u16 link_status:1; // bit 2 + u16 jabber_detect:1; // bit 1 + u16 ext_cap:1; // bit 0 +#else + u16 ext_cap:1; // bit 0 + u16 jabber_detect:1; // bit 1 + u16 link_status:1; // bit 2 + u16 auto_neg_able:1; // bit 3 + u16 remote_fault:1; // bit 4 + u16 auto_neg_complete:1; // bit 5 + u16 preamble_supress:1; // bit 6 + u16 res1:1; // bit 7 + u16 extend_status:1; // bit 8 + u16 link_100T2hdx:1; // bit 9 + u16 link_100T2fdx:1; // bit 10 + u16 link_10hdx:1; // bit 11 + u16 link_10fdx:1; // bit 12 + u16 link_100hdx:1; // bit 13 + u16 link_100fdx:1; // bit 14 + u16 link_100T4:1; // bit 15 +#endif + } bits; +} MI_BMSR_t, *PMI_BMSR_t; + +/* MI Register 2: Physical Identifier 1 */ +typedef union _MI_IDR1_t { + u16 value; + struct { + u16 ieee_address:16; // 0x0282 default(bits 0-15) + } bits; +} MI_IDR1_t, *PMI_IDR1_t; + +/* MI Register 3: Physical Identifier 2 */ +typedef union _MI_IDR2_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 ieee_address:6; // 111100 default(bits 10-15) + u16 model_no:6; // 000001 default(bits 4-9) + u16 rev_no:4; // 0010 default(bits 0-3) +#else + u16 rev_no:4; // 0010 default(bits 0-3) + u16 model_no:6; // 000001 default(bits 4-9) + u16 ieee_address:6; // 111100 default(bits 10-15) +#endif + } bits; +} MI_IDR2_t, *PMI_IDR2_t; + +/* MI Register 4: Auto-negotiation advertisement register */ +typedef union _MI_ANAR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 np_indication:1; // bit 15 + u16 res2:1; // bit 14 + u16 remote_fault:1; // bit 13 + u16 res1:1; // bit 12 + u16 cap_asmpause:1; // bit 11 + u16 cap_pause:1; // bit 10 + u16 cap_100T4:1; // bit 9 + u16 cap_100fdx:1; // bit 8 + u16 cap_100hdx:1; // bit 7 + u16 cap_10fdx:1; // bit 6 + u16 cap_10hdx:1; // bit 5 + u16 selector:5; // bits 0-4 +#else + u16 selector:5; // bits 0-4 + u16 cap_10hdx:1; // bit 5 + u16 cap_10fdx:1; // bit 6 + u16 cap_100hdx:1; // bit 7 + u16 cap_100fdx:1; // bit 8 + u16 cap_100T4:1; // bit 9 + u16 cap_pause:1; // bit 10 + u16 cap_asmpause:1; // bit 11 + u16 res1:1; // bit 12 + u16 remote_fault:1; // bit 13 + u16 res2:1; // bit 14 + u16 np_indication:1; // bit 15 +#endif + } bits; +} MI_ANAR_t, *PMI_ANAR_t; + +/* MI Register 5: Auto-negotiation link partner advertisement register */ +typedef struct _MI_ANLPAR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 np_indication:1; // bit 15 + u16 acknowledge:1; // bit 14 + u16 remote_fault:1; // bit 13 + u16 res1:1; // bit 12 + u16 cap_asmpause:1; // bit 11 + u16 cap_pause:1; // bit 10 + u16 cap_100T4:1; // bit 9 + u16 cap_100fdx:1; // bit 8 + u16 cap_100hdx:1; // bit 7 + u16 cap_10fdx:1; // bit 6 + u16 cap_10hdx:1; // bit 5 + u16 selector:5; // bits 0-4 +#else + u16 selector:5; // bits 0-4 + u16 cap_10hdx:1; // bit 5 + u16 cap_10fdx:1; // bit 6 + u16 cap_100hdx:1; // bit 7 + u16 cap_100fdx:1; // bit 8 + u16 cap_100T4:1; // bit 9 + u16 cap_pause:1; // bit 10 + u16 cap_asmpause:1; // bit 11 + u16 res1:1; // bit 12 + u16 remote_fault:1; // bit 13 + u16 acknowledge:1; // bit 14 + u16 np_indication:1; // bit 15 +#endif + } bits; +} MI_ANLPAR_t, *PMI_ANLPAR_t; + +/* MI Register 6: Auto-negotiation expansion register */ +typedef union _MI_ANER_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 res:11; // bits 5-15 + u16 pdf:1; // bit 4 + u16 lp_np_able:1; // bit 3 + u16 np_able:1; // bit 2 + u16 page_rx:1; // bit 1 + u16 lp_an_able:1; // bit 0 +#else + u16 lp_an_able:1; // bit 0 + u16 page_rx:1; // bit 1 + u16 np_able:1; // bit 2 + u16 lp_np_able:1; // bit 3 + u16 pdf:1; // bit 4 + u16 res:11; // bits 5-15 +#endif + } bits; +} MI_ANER_t, *PMI_ANER_t; + +/* MI Register 7: Auto-negotiation next page transmit reg(0x07) */ +typedef union _MI_ANNPTR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 np:1; // bit 15 + u16 res1:1; // bit 14 + u16 msg_page:1; // bit 13 + u16 ack2:1; // bit 12 + u16 toggle:1; // bit 11 + u16 msg:11; // bits 0-10 +#else + u16 msg:11; // bits 0-10 + u16 toggle:1; // bit 11 + u16 ack2:1; // bit 12 + u16 msg_page:1; // bit 13 + u16 res1:1; // bit 14 + u16 np:1; // bit 15 +#endif + } bits; +} MI_ANNPTR_t, *PMI_ANNPTR_t; + +/* MI Register 8: Link Partner Next Page Reg(0x08) */ +typedef union _MI_LPNPR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 np:1; // bit 15 + u16 ack:1; // bit 14 + u16 msg_page:1; // bit 13 + u16 ack2:1; // bit 12 + u16 toggle:1; // bit 11 + u16 msg:11; // bits 0-10 +#else + u16 msg:11; // bits 0-10 + u16 toggle:1; // bit 11 + u16 ack2:1; // bit 12 + u16 msg_page:1; // bit 13 + u16 ack:1; // bit 14 + u16 np:1; // bit 15 +#endif + } bits; +} MI_LPNPR_t, *PMI_LPNPR_t; + +/* MI Register 9: 1000BaseT Control Reg(0x09) */ +typedef union _MI_GCR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 test_mode:3; // bits 13-15 + u16 ms_config_en:1; // bit 12 + u16 ms_value:1; // bit 11 + u16 port_type:1; // bit 10 + u16 link_1000fdx:1; // bit 9 + u16 link_1000hdx:1; // bit 8 + u16 res:8; // bit 0-7 +#else + u16 res:8; // bit 0-7 + u16 link_1000hdx:1; // bit 8 + u16 link_1000fdx:1; // bit 9 + u16 port_type:1; // bit 10 + u16 ms_value:1; // bit 11 + u16 ms_config_en:1; // bit 12 + u16 test_mode:3; // bits 13-15 +#endif + } bits; +} MI_GCR_t, *PMI_GCR_t; + +/* MI Register 10: 1000BaseT Status Reg(0x0A) */ +typedef union _MI_GSR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 ms_config_fault:1; // bit 15 + u16 ms_resolve:1; // bit 14 + u16 local_rx_status:1; // bit 13 + u16 remote_rx_status:1; // bit 12 + u16 link_1000fdx:1; // bit 11 + u16 link_1000hdx:1; // bit 10 + u16 res:2; // bits 8-9 + u16 idle_err_cnt:8; // bits 0-7 +#else + u16 idle_err_cnt:8; // bits 0-7 + u16 res:2; // bits 8-9 + u16 link_1000hdx:1; // bit 10 + u16 link_1000fdx:1; // bit 11 + u16 remote_rx_status:1; // bit 12 + u16 local_rx_status:1; // bit 13 + u16 ms_resolve:1; // bit 14 + u16 ms_config_fault:1; // bit 15 +#endif + } bits; +} MI_GSR_t, *PMI_GSR_t; + +/* MI Register 11 - 14: Reserved Regs(0x0B - 0x0E) */ +typedef union _MI_RES_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 res15:1; // bit 15 + u16 res14:1; // bit 14 + u16 res13:1; // bit 13 + u16 res12:1; // bit 12 + u16 res11:1; // bit 11 + u16 res10:1; // bit 10 + u16 res9:1; // bit 9 + u16 res8:1; // bit 8 + u16 res7:1; // bit 7 + u16 res6:1; // bit 6 + u16 res5:1; // bit 5 + u16 res4:1; // bit 4 + u16 res3:1; // bit 3 + u16 res2:1; // bit 2 + u16 res1:1; // bit 1 + u16 res0:1; // bit 0 +#else + u16 res0:1; // bit 0 + u16 res1:1; // bit 1 + u16 res2:1; // bit 2 + u16 res3:1; // bit 3 + u16 res4:1; // bit 4 + u16 res5:1; // bit 5 + u16 res6:1; // bit 6 + u16 res7:1; // bit 7 + u16 res8:1; // bit 8 + u16 res9:1; // bit 9 + u16 res10:1; // bit 10 + u16 res11:1; // bit 11 + u16 res12:1; // bit 12 + u16 res13:1; // bit 13 + u16 res14:1; // bit 14 + u16 res15:1; // bit 15 +#endif + } bits; +} MI_RES_t, *PMI_RES_t; + +/* MI Register 15: Extended status Reg(0x0F) */ +typedef union _MI_ESR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 link_1000Xfdx:1; // bit 15 + u16 link_1000Xhdx:1; // bit 14 + u16 link_1000fdx:1; // bit 13 + u16 link_1000hdx:1; // bit 12 + u16 res:12; // bit 0-11 +#else + u16 res:12; // bit 0-11 + u16 link_1000hdx:1; // bit 12 + u16 link_1000fdx:1; // bit 13 + u16 link_1000Xhdx:1; // bit 14 + u16 link_1000Xfdx:1; // bit 15 +#endif + } bits; +} MI_ESR_t, *PMI_ESR_t; + +/* MI Register 16 - 18: Reserved Reg(0x10-0x12) */ + +/* MI Register 19: Loopback Control Reg(0x13) */ +typedef union _MI_LCR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 mii_en:1; // bit 15 + u16 pcs_en:1; // bit 14 + u16 pmd_en:1; // bit 13 + u16 all_digital_en:1; // bit 12 + u16 replica_en:1; // bit 11 + u16 line_driver_en:1; // bit 10 + u16 res:10; // bit 0-9 +#else + u16 res:10; // bit 0-9 + u16 line_driver_en:1; // bit 10 + u16 replica_en:1; // bit 11 + u16 all_digital_en:1; // bit 12 + u16 pmd_en:1; // bit 13 + u16 pcs_en:1; // bit 14 + u16 mii_en:1; // bit 15 +#endif + } bits; +} MI_LCR_t, *PMI_LCR_t; + +/* MI Register 20: Reserved Reg(0x14) */ + +/* MI Register 21: Management Interface Control Reg(0x15) */ +typedef union _MI_MICR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 res1:5; // bits 11-15 + u16 mi_error_count:7; // bits 4-10 + u16 res2:1; // bit 3 + u16 ignore_10g_fr:1; // bit 2 + u16 res3:1; // bit 1 + u16 preamble_supress_en:1; // bit 0 +#else + u16 preamble_supress_en:1; // bit 0 + u16 res3:1; // bit 1 + u16 ignore_10g_fr:1; // bit 2 + u16 res2:1; // bit 3 + u16 mi_error_count:7; // bits 4-10 + u16 res1:5; // bits 11-15 +#endif + } bits; +} MI_MICR_t, *PMI_MICR_t; + +/* MI Register 22: PHY Configuration Reg(0x16) */ +typedef union _MI_PHY_CONFIG_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 crs_tx_en:1; // bit 15 + u16 res1:1; // bit 14 + u16 tx_fifo_depth:2; // bits 12-13 + u16 speed_downshift:2; // bits 10-11 + u16 pbi_detect:1; // bit 9 + u16 tbi_rate:1; // bit 8 + u16 alternate_np:1; // bit 7 + u16 group_mdio_en:1; // bit 6 + u16 tx_clock_en:1; // bit 5 + u16 sys_clock_en:1; // bit 4 + u16 res2:1; // bit 3 + u16 mac_if_mode:3; // bits 0-2 +#else + u16 mac_if_mode:3; // bits 0-2 + u16 res2:1; // bit 3 + u16 sys_clock_en:1; // bit 4 + u16 tx_clock_en:1; // bit 5 + u16 group_mdio_en:1; // bit 6 + u16 alternate_np:1; // bit 7 + u16 tbi_rate:1; // bit 8 + u16 pbi_detect:1; // bit 9 + u16 speed_downshift:2; // bits 10-11 + u16 tx_fifo_depth:2; // bits 12-13 + u16 res1:1; // bit 14 + u16 crs_tx_en:1; // bit 15 +#endif + } bits; +} MI_PHY_CONFIG_t, *PMI_PHY_CONFIG_t; + +/* MI Register 23: PHY CONTROL Reg(0x17) */ +typedef union _MI_PHY_CONTROL_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 res1:1; // bit 15 + u16 tdr_en:1; // bit 14 + u16 res2:1; // bit 13 + u16 downshift_attempts:2; // bits 11-12 + u16 res3:5; // bit 6-10 + u16 jabber_10baseT:1; // bit 5 + u16 sqe_10baseT:1; // bit 4 + u16 tp_loopback_10baseT:1; // bit 3 + u16 preamble_gen_en:1; // bit 2 + u16 res4:1; // bit 1 + u16 force_int:1; // bit 0 +#else + u16 force_int:1; // bit 0 + u16 res4:1; // bit 1 + u16 preamble_gen_en:1; // bit 2 + u16 tp_loopback_10baseT:1; // bit 3 + u16 sqe_10baseT:1; // bit 4 + u16 jabber_10baseT:1; // bit 5 + u16 res3:5; // bit 6-10 + u16 downshift_attempts:2; // bits 11-12 + u16 res2:1; // bit 13 + u16 tdr_en:1; // bit 14 + u16 res1:1; // bit 15 +#endif + } bits; +} MI_PHY_CONTROL_t, *PMI_PHY_CONTROL_t; + +/* MI Register 24: Interrupt Mask Reg(0x18) */ +typedef union _MI_IMR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 res1:6; // bits 10-15 + u16 mdio_sync_lost:1; // bit 9 + u16 autoneg_status:1; // bit 8 + u16 hi_bit_err:1; // bit 7 + u16 np_rx:1; // bit 6 + u16 err_counter_full:1; // bit 5 + u16 fifo_over_underflow:1; // bit 4 + u16 rx_status:1; // bit 3 + u16 link_status:1; // bit 2 + u16 automatic_speed:1; // bit 1 + u16 int_en:1; // bit 0 +#else + u16 int_en:1; // bit 0 + u16 automatic_speed:1; // bit 1 + u16 link_status:1; // bit 2 + u16 rx_status:1; // bit 3 + u16 fifo_over_underflow:1; // bit 4 + u16 err_counter_full:1; // bit 5 + u16 np_rx:1; // bit 6 + u16 hi_bit_err:1; // bit 7 + u16 autoneg_status:1; // bit 8 + u16 mdio_sync_lost:1; // bit 9 + u16 res1:6; // bits 10-15 +#endif + } bits; +} MI_IMR_t, *PMI_IMR_t; + +/* MI Register 25: Interrupt Status Reg(0x19) */ +typedef union _MI_ISR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 res1:6; // bits 10-15 + u16 mdio_sync_lost:1; // bit 9 + u16 autoneg_status:1; // bit 8 + u16 hi_bit_err:1; // bit 7 + u16 np_rx:1; // bit 6 + u16 err_counter_full:1; // bit 5 + u16 fifo_over_underflow:1; // bit 4 + u16 rx_status:1; // bit 3 + u16 link_status:1; // bit 2 + u16 automatic_speed:1; // bit 1 + u16 int_en:1; // bit 0 +#else + u16 int_en:1; // bit 0 + u16 automatic_speed:1; // bit 1 + u16 link_status:1; // bit 2 + u16 rx_status:1; // bit 3 + u16 fifo_over_underflow:1; // bit 4 + u16 err_counter_full:1; // bit 5 + u16 np_rx:1; // bit 6 + u16 hi_bit_err:1; // bit 7 + u16 autoneg_status:1; // bit 8 + u16 mdio_sync_lost:1; // bit 9 + u16 res1:6; // bits 10-15 +#endif + } bits; +} MI_ISR_t, *PMI_ISR_t; + +/* MI Register 26: PHY Status Reg(0x1A) */ +typedef union _MI_PSR_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 res1:1; // bit 15 + u16 autoneg_fault:2; // bit 13-14 + u16 autoneg_status:1; // bit 12 + u16 mdi_x_status:1; // bit 11 + u16 polarity_status:1; // bit 10 + u16 speed_status:2; // bits 8-9 + u16 duplex_status:1; // bit 7 + u16 link_status:1; // bit 6 + u16 tx_status:1; // bit 5 + u16 rx_status:1; // bit 4 + u16 collision_status:1; // bit 3 + u16 autoneg_en:1; // bit 2 + u16 pause_en:1; // bit 1 + u16 asymmetric_dir:1; // bit 0 +#else + u16 asymmetric_dir:1; // bit 0 + u16 pause_en:1; // bit 1 + u16 autoneg_en:1; // bit 2 + u16 collision_status:1; // bit 3 + u16 rx_status:1; // bit 4 + u16 tx_status:1; // bit 5 + u16 link_status:1; // bit 6 + u16 duplex_status:1; // bit 7 + u16 speed_status:2; // bits 8-9 + u16 polarity_status:1; // bit 10 + u16 mdi_x_status:1; // bit 11 + u16 autoneg_status:1; // bit 12 + u16 autoneg_fault:2; // bit 13-14 + u16 res1:1; // bit 15 +#endif + } bits; +} MI_PSR_t, *PMI_PSR_t; + +/* MI Register 27: LED Control Reg 1(0x1B) */ +typedef union _MI_LCR1_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 res1:2; // bits 14-15 + u16 led_dup_indicate:2; // bits 12-13 + u16 led_10baseT:2; // bits 10-11 + u16 led_collision:2; // bits 8-9 + u16 res2:2; // bits 6-7 + u16 res3:2; // bits 4-5 + u16 pulse_dur:2; // bits 2-3 + u16 pulse_stretch1:1; // bit 1 + u16 pulse_stretch0:1; // bit 0 +#else + u16 pulse_stretch0:1; // bit 0 + u16 pulse_stretch1:1; // bit 1 + u16 pulse_dur:2; // bits 2-3 + u16 res3:2; // bits 4-5 + u16 res2:2; // bits 6-7 + u16 led_collision:2; // bits 8-9 + u16 led_10baseT:2; // bits 10-11 + u16 led_dup_indicate:2; // bits 12-13 + u16 res1:2; // bits 14-15 +#endif + } bits; +} MI_LCR1_t, *PMI_LCR1_t; + +/* MI Register 28: LED Control Reg 2(0x1C) */ +typedef union _MI_LCR2_t { + u16 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u16 led_link:4; // bits 12-15 + u16 led_tx_rx:4; // bits 8-11 + u16 led_100BaseTX:4; // bits 4-7 + u16 led_1000BaseT:4; // bits 0-3 +#else + u16 led_1000BaseT:4; // bits 0-3 + u16 led_100BaseTX:4; // bits 4-7 + u16 led_tx_rx:4; // bits 8-11 + u16 led_link:4; // bits 12-15 +#endif + } bits; +} MI_LCR2_t, *PMI_LCR2_t; + +/* MI Register 29 - 31: Reserved Reg(0x1D - 0x1E) */ + +/* TruePHY headers */ +typedef struct _TRUEPHY_ACCESS_MI_REGS_ { + TRUEPHY_HANDLE hTruePhy; + int32_t nPhyId; + u8 bReadWrite; + u8 *pbyRegs; + u8 *pwData; + int32_t nRegCount; +} TRUEPHY_ACCESS_MI_REGS, *PTRUEPHY_ACCESS_MI_REGS; + +/* TruePHY headers */ +typedef struct _TAG_TPAL_ACCESS_MI_REGS_ { + u32 nPhyId; + u8 bReadWrite; + u32 nRegCount; + u16 Data[4096]; + u8 Regs[4096]; +} TPAL_ACCESS_MI_REGS, *PTPAL_ACCESS_MI_REGS; + + +typedef TRUEPHY_HANDLE TPAL_HANDLE; + +/* Forward declaration of the private adapter structure */ +struct et131x_adapter; + +/* OS Specific Functions*/ +void TPAL_SetPhy10HalfDuplex(struct et131x_adapter *adapter); +void TPAL_SetPhy10FullDuplex(struct et131x_adapter *adapter); +void TPAL_SetPhy10Force(struct et131x_adapter *pAdapter); +void TPAL_SetPhy100HalfDuplex(struct et131x_adapter *adapter); +void TPAL_SetPhy100FullDuplex(struct et131x_adapter *adapter); +void TPAL_SetPhy100Force(struct et131x_adapter *pAdapter); +void TPAL_SetPhy1000FullDuplex(struct et131x_adapter *adapter); +void TPAL_SetPhyAutoNeg(struct et131x_adapter *adapter); + +/* Prototypes for ET1310_phy.c */ +int et131x_xcvr_find(struct et131x_adapter *adapter); +int et131x_setphy_normal(struct et131x_adapter *adapter); +int32_t PhyMiRead(struct et131x_adapter *adapter, + u8 xcvrAddr, u8 xcvrReg, u16 *value); + +/* static inline function does not work because et131x_adapter is not always + * defined + */ +#define MiRead(adapter, xcvrReg, value) \ + PhyMiRead((adapter), (adapter)->Stats.xcvr_addr, (xcvrReg), (value)) + +int32_t MiWrite(struct et131x_adapter *adapter, + u8 xcvReg, u16 value); +void et131x_Mii_check(struct et131x_adapter *pAdapter, + MI_BMSR_t bmsr, MI_BMSR_t bmsr_ints); + +/* This last is not strictly required (the driver could call the TPAL + * version instead), but this sets the adapter up correctly, and calls the + * access routine indirectly. This protects the driver from changes in TPAL. + */ +void SetPhy_10BaseTHalfDuplex(struct et131x_adapter *adapter); + +/* Defines for PHY access routines */ + +// Define bit operation flags +#define TRUEPHY_BIT_CLEAR 0 +#define TRUEPHY_BIT_SET 1 +#define TRUEPHY_BIT_READ 2 + +// Define read/write operation flags +#ifndef TRUEPHY_READ +#define TRUEPHY_READ 0 +#define TRUEPHY_WRITE 1 +#define TRUEPHY_MASK 2 +#endif + +// Define speeds +#define TRUEPHY_SPEED_10MBPS 0 +#define TRUEPHY_SPEED_100MBPS 1 +#define TRUEPHY_SPEED_1000MBPS 2 + +// Define duplex modes +#define TRUEPHY_DUPLEX_HALF 0 +#define TRUEPHY_DUPLEX_FULL 1 + +// Define master/slave configuration values +#define TRUEPHY_CFG_SLAVE 0 +#define TRUEPHY_CFG_MASTER 1 + +// Define MDI/MDI-X settings +#define TRUEPHY_MDI 0 +#define TRUEPHY_MDIX 1 +#define TRUEPHY_AUTO_MDI_MDIX 2 + +// Define 10Base-T link polarities +#define TRUEPHY_POLARITY_NORMAL 0 +#define TRUEPHY_POLARITY_INVERTED 1 + +// Define auto-negotiation results +#define TRUEPHY_ANEG_NOT_COMPLETE 0 +#define TRUEPHY_ANEG_COMPLETE 1 +#define TRUEPHY_ANEG_DISABLED 2 + +/* Define duplex advertisment flags */ +#define TRUEPHY_ADV_DUPLEX_NONE 0x00 +#define TRUEPHY_ADV_DUPLEX_FULL 0x01 +#define TRUEPHY_ADV_DUPLEX_HALF 0x02 +#define TRUEPHY_ADV_DUPLEX_BOTH \ + (TRUEPHY_ADV_DUPLEX_FULL | TRUEPHY_ADV_DUPLEX_HALF) + +#define PHY_CONTROL 0x00 //#define TRU_MI_CONTROL_REGISTER 0 +#define PHY_STATUS 0x01 //#define TRU_MI_STATUS_REGISTER 1 +#define PHY_ID_1 0x02 //#define TRU_MI_PHY_IDENTIFIER_1_REGISTER 2 +#define PHY_ID_2 0x03 //#define TRU_MI_PHY_IDENTIFIER_2_REGISTER 3 +#define PHY_AUTO_ADVERTISEMENT 0x04 //#define TRU_MI_ADVERTISEMENT_REGISTER 4 +#define PHY_AUTO_LINK_PARTNER 0x05 //#define TRU_MI_LINK_PARTNER_ABILITY_REGISTER 5 +#define PHY_AUTO_EXPANSION 0x06 //#define TRU_MI_EXPANSION_REGISTER 6 +#define PHY_AUTO_NEXT_PAGE_TX 0x07 //#define TRU_MI_NEXT_PAGE_TRANSMIT_REGISTER 7 +#define PHY_LINK_PARTNER_NEXT_PAGE 0x08 //#define TRU_MI_LINK_PARTNER_NEXT_PAGE_REGISTER 8 +#define PHY_1000_CONTROL 0x09 //#define TRU_MI_1000BASET_CONTROL_REGISTER 9 +#define PHY_1000_STATUS 0x0A //#define TRU_MI_1000BASET_STATUS_REGISTER 10 + +#define PHY_EXTENDED_STATUS 0x0F //#define TRU_MI_EXTENDED_STATUS_REGISTER 15 + +// some defines for modem registers that seem to be 'reserved' +#define PHY_INDEX_REG 0x10 +#define PHY_DATA_REG 0x11 + +#define PHY_MPHY_CONTROL_REG 0x12 //#define TRU_VMI_MPHY_CONTROL_REGISTER 18 + +#define PHY_LOOPBACK_CONTROL 0x13 //#define TRU_VMI_LOOPBACK_CONTROL_1_REGISTER 19 + //#define TRU_VMI_LOOPBACK_CONTROL_2_REGISTER 20 +#define PHY_REGISTER_MGMT_CONTROL 0x15 //#define TRU_VMI_MI_SEQ_CONTROL_REGISTER 21 +#define PHY_CONFIG 0x16 //#define TRU_VMI_CONFIGURATION_REGISTER 22 +#define PHY_PHY_CONTROL 0x17 //#define TRU_VMI_PHY_CONTROL_REGISTER 23 +#define PHY_INTERRUPT_MASK 0x18 //#define TRU_VMI_INTERRUPT_MASK_REGISTER 24 +#define PHY_INTERRUPT_STATUS 0x19 //#define TRU_VMI_INTERRUPT_STATUS_REGISTER 25 +#define PHY_PHY_STATUS 0x1A //#define TRU_VMI_PHY_STATUS_REGISTER 26 +#define PHY_LED_1 0x1B //#define TRU_VMI_LED_CONTROL_1_REGISTER 27 +#define PHY_LED_2 0x1C //#define TRU_VMI_LED_CONTROL_2_REGISTER 28 + //#define TRU_VMI_LINK_CONTROL_REGISTER 29 + //#define TRU_VMI_TIMING_CONTROL_REGISTER + +/* Prototypes for PHY access routines */ +void ET1310_PhyInit(struct et131x_adapter *adapter); +void ET1310_PhyReset(struct et131x_adapter *adapter); +void ET1310_PhyPowerDown(struct et131x_adapter *adapter, bool down); +void ET1310_PhyAutoNeg(struct et131x_adapter *adapter, bool enable); +void ET1310_PhyDuplexMode(struct et131x_adapter *adapter, u16 duplex); +void ET1310_PhySpeedSelect(struct et131x_adapter *adapter, u16 speed); +void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *adapter, + u16 duplex); +void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *adapter, + u16 duplex); +void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *adapter, + u16 duplex); +void ET1310_PhyLinkStatus(struct et131x_adapter *adapter, + u8 *ucLinkStatus, + u32 *uiAutoNeg, + u32 *uiLinkSpeed, + u32 *uiDuplexMode, + u32 *uiMdiMdix, + u32 *uiMasterSlave, u32 *uiPolarity); +void ET1310_PhyAndOrReg(struct et131x_adapter *adapter, + u16 regnum, u16 andMask, u16 orMask); +void ET1310_PhyAccessMiBit(struct et131x_adapter *adapter, + u16 action, + u16 regnum, u16 bitnum, u8 *value); + +#endif /* _ET1310_PHY_H_ */ diff --git a/drivers/staging/et131x/et1310_pm.c b/drivers/staging/et131x/et1310_pm.c new file mode 100644 index 000000000000..9539bc628cae --- /dev/null +++ b/drivers/staging/et131x/et1310_pm.c @@ -0,0 +1,207 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_pm.c - All power management related code (not completely implemented) + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#include "et131x_version.h" +#include "et131x_debug.h" +#include "et131x_defs.h" + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/bitops.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> + +#include "et1310_phy.h" +#include "et1310_pm.h" +#include "et1310_jagcore.h" +#include "et1310_mac.h" +#include "et1310_rx.h" + +#include "et131x_adapter.h" +#include "et131x_initpci.h" + +/* Data for debugging facilities */ +#ifdef CONFIG_ET131X_DEBUG +extern dbg_info_t *et131x_dbginfo; +#endif /* CONFIG_ET131X_DEBUG */ + +/** + * EnablePhyComa - called when network cable is unplugged + * @pAdapter: pointer to our adapter structure + * + * driver receive an phy status change interrupt while in D0 and check that + * phy_status is down. + * + * -- gate off JAGCore; + * -- set gigE PHY in Coma mode + * -- wake on phy_interrupt; Perform software reset JAGCore, + * re-initialize jagcore and gigE PHY + * + * Add D0-ASPM-PhyLinkDown Support: + * -- while in D0, when there is a phy_interrupt indicating phy link + * down status, call the MPSetPhyComa routine to enter this active + * state power saving mode + * -- while in D0-ASPM-PhyLinkDown mode, when there is a phy_interrupt + * indicating linkup status, call the MPDisablePhyComa routine to + * restore JAGCore and gigE PHY + */ +void EnablePhyComa(struct et131x_adapter *pAdapter) +{ + unsigned long lockflags; + PM_CSR_t GlobalPmCSR; + int32_t LoopCounter = 10; + + DBG_ENTER(et131x_dbginfo); + + GlobalPmCSR.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + + /* Save the GbE PHY speed and duplex modes. Need to restore this + * when cable is plugged back in + */ + pAdapter->PoMgmt.PowerDownSpeed = pAdapter->AiForceSpeed; + pAdapter->PoMgmt.PowerDownDuplex = pAdapter->AiForceDpx; + + /* Stop sending packets. */ + spin_lock_irqsave(&pAdapter->SendHWLock, lockflags); + MP_SET_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER); + spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags); + + /* Wait for outstanding Receive packets */ + while ((MP_GET_RCV_REF(pAdapter) != 0) && (LoopCounter-- > 0)) { + mdelay(2); + } + + /* Gate off JAGCore 3 clock domains */ + GlobalPmCSR.bits.pm_sysclk_gate = 0; + GlobalPmCSR.bits.pm_txclk_gate = 0; + GlobalPmCSR.bits.pm_rxclk_gate = 0; + writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value); + + /* Program gigE PHY in to Coma mode */ + GlobalPmCSR.bits.pm_phy_sw_coma = 1; + writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * DisablePhyComa - Disable the Phy Coma Mode + * @pAdapter: pointer to our adapter structure + */ +void DisablePhyComa(struct et131x_adapter *pAdapter) +{ + PM_CSR_t GlobalPmCSR; + + DBG_ENTER(et131x_dbginfo); + + GlobalPmCSR.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + + /* Disable phy_sw_coma register and re-enable JAGCore clocks */ + GlobalPmCSR.bits.pm_sysclk_gate = 1; + GlobalPmCSR.bits.pm_txclk_gate = 1; + GlobalPmCSR.bits.pm_rxclk_gate = 1; + GlobalPmCSR.bits.pm_phy_sw_coma = 0; + writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value); + + /* Restore the GbE PHY speed and duplex modes; + * Reset JAGCore; re-configure and initialize JAGCore and gigE PHY + */ + pAdapter->AiForceSpeed = pAdapter->PoMgmt.PowerDownSpeed; + pAdapter->AiForceDpx = pAdapter->PoMgmt.PowerDownDuplex; + + /* Re-initialize the send structures */ + et131x_init_send(pAdapter); + + /* Reset the RFD list and re-start RU */ + et131x_reset_recv(pAdapter); + + /* Bring the device back to the state it was during init prior to + * autonegotiation being complete. This way, when we get the auto-neg + * complete interrupt, we can complete init by calling ConfigMacREGS2. + */ + et131x_soft_reset(pAdapter); + + /* setup et1310 as per the documentation ?? */ + et131x_adapter_setup(pAdapter); + + /* Allow Tx to restart */ + MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER); + + /* Need to re-enable Rx. */ + et131x_rx_dma_enable(pAdapter); + + DBG_LEAVE(et131x_dbginfo); +} + diff --git a/drivers/staging/et131x/et1310_pm.h b/drivers/staging/et131x/et1310_pm.h new file mode 100644 index 000000000000..6802338e29d9 --- /dev/null +++ b/drivers/staging/et131x/et1310_pm.h @@ -0,0 +1,125 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_pm.h - Defines, structs, enums, prototypes, etc. pertaining to power + * management. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef _ET1310_PM_H_ +#define _ET1310_PM_H_ + +#include "et1310_address_map.h" + +#define MAX_WOL_PACKET_SIZE 0x80 +#define MAX_WOL_MASK_SIZE ( MAX_WOL_PACKET_SIZE / 8 ) +#define NUM_WOL_PATTERNS 0x5 +#define CRC16_POLY 0x1021 + +/* Definition of NDIS_DEVICE_POWER_STATE */ +typedef enum { + NdisDeviceStateUnspecified = 0, + NdisDeviceStateD0, + NdisDeviceStateD1, + NdisDeviceStateD2, + NdisDeviceStateD3 +} NDIS_DEVICE_POWER_STATE; + +typedef struct _MP_POWER_MGMT { + /* variable putting the phy into coma mode when boot up with no cable + * plugged in after 5 seconds + */ + u8 TransPhyComaModeOnBoot; + + /* Array holding the five CRC values that the device is currently + * using for WOL. This will be queried when a pattern is to be + * removed. + */ + u32 localWolAndCrc0; + u16 WOLPatternList[NUM_WOL_PATTERNS]; + u8 WOLMaskList[NUM_WOL_PATTERNS][MAX_WOL_MASK_SIZE]; + u32 WOLMaskSize[NUM_WOL_PATTERNS]; + + /* IP address */ + union { + u32 u32; + u8 u8[4]; + } IPAddress; + + /* Current Power state of the adapter. */ + NDIS_DEVICE_POWER_STATE PowerState; + bool WOLState; + bool WOLEnabled; + bool Failed10Half; + bool bFailedStateTransition; + + /* Next two used to save power information at power down. This + * information will be used during power up to set up parts of Power + * Management in JAGCore + */ + u32 tx_en; + u32 rx_en; + u16 PowerDownSpeed; + u8 PowerDownDuplex; +} MP_POWER_MGMT, *PMP_POWER_MGMT; + +/* Forward declaration of the private adapter structure + * ( IS THERE A WAY TO DO THIS WITH A TYPEDEF??? ) + */ +struct et131x_adapter; + +u16 CalculateCCITCRC16(u8 *Pattern, u8 *Mask, u32 MaskSize); +void EnablePhyComa(struct et131x_adapter *adapter); +void DisablePhyComa(struct et131x_adapter *adapter); + +#endif /* _ET1310_PM_H_ */ diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c new file mode 100644 index 000000000000..ec98da5da5bc --- /dev/null +++ b/drivers/staging/et131x/et1310_rx.c @@ -0,0 +1,1391 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_rx.c - Routines used to perform data reception + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#include "et131x_version.h" +#include "et131x_debug.h" +#include "et131x_defs.h" + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/bitops.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> + +#include "et1310_phy.h" +#include "et1310_pm.h" +#include "et1310_jagcore.h" + +#include "et131x_adapter.h" +#include "et131x_initpci.h" + +#include "et1310_rx.h" + +/* Data for debugging facilities */ +#ifdef CONFIG_ET131X_DEBUG +extern dbg_info_t *et131x_dbginfo; +#endif /* CONFIG_ET131X_DEBUG */ + + +void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd); + +/** + * et131x_rx_dma_memory_alloc + * @adapter: pointer to our private adapter structure + * + * Returns 0 on success and errno on failure (as defined in errno.h) + * + * Allocates Free buffer ring 1 for sure, free buffer ring 0 if required, + * and the Packet Status Ring. + */ +int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) +{ + uint32_t OuterLoop, InnerLoop; + uint32_t bufsize; + uint32_t pktStatRingSize, FBRChunkSize; + RX_RING_t *rx_ring; + + DBG_ENTER(et131x_dbginfo); + + /* Setup some convenience pointers */ + rx_ring = (RX_RING_t *) & adapter->RxRing; + + /* Alloc memory for the lookup table */ +#ifdef USE_FBR0 + rx_ring->Fbr[0] = kmalloc(sizeof(FBRLOOKUPTABLE), GFP_KERNEL); +#endif + + rx_ring->Fbr[1] = kmalloc(sizeof(FBRLOOKUPTABLE), GFP_KERNEL); + + /* The first thing we will do is configure the sizes of the buffer + * rings. These will change based on jumbo packet support. Larger + * jumbo packets increases the size of each entry in FBR0, and the + * number of entries in FBR0, while at the same time decreasing the + * number of entries in FBR1. + * + * FBR1 holds "large" frames, FBR0 holds "small" frames. If FBR1 + * entries are huge in order to accomodate a "jumbo" frame, then it + * will have less entries. Conversely, FBR1 will now be relied upon + * to carry more "normal" frames, thus it's entry size also increases + * and the number of entries goes up too (since it now carries + * "small" + "regular" packets. + * + * In this scheme, we try to maintain 512 entries between the two + * rings. Also, FBR1 remains a constant size - when it's size doubles + * the number of entries halves. FBR0 increases in size, however. + */ + + if (adapter->RegistryJumboPacket < 2048) { +#ifdef USE_FBR0 + rx_ring->Fbr0BufferSize = 256; + rx_ring->Fbr0NumEntries = 512; +#endif + rx_ring->Fbr1BufferSize = 2048; + rx_ring->Fbr1NumEntries = 512; + } else if (adapter->RegistryJumboPacket < 4096) { +#ifdef USE_FBR0 + rx_ring->Fbr0BufferSize = 512; + rx_ring->Fbr0NumEntries = 1024; +#endif + rx_ring->Fbr1BufferSize = 4096; + rx_ring->Fbr1NumEntries = 512; + } else { +#ifdef USE_FBR0 + rx_ring->Fbr0BufferSize = 1024; + rx_ring->Fbr0NumEntries = 768; +#endif + rx_ring->Fbr1BufferSize = 16384; + rx_ring->Fbr1NumEntries = 128; + } + +#ifdef USE_FBR0 + adapter->RxRing.PsrNumEntries = adapter->RxRing.Fbr0NumEntries + + adapter->RxRing.Fbr1NumEntries; +#else + adapter->RxRing.PsrNumEntries = adapter->RxRing.Fbr1NumEntries; +#endif + + /* Allocate an area of memory for Free Buffer Ring 1 */ + bufsize = (sizeof(FBR_DESC_t) * rx_ring->Fbr1NumEntries) + 0xfff; + rx_ring->pFbr1RingVa = pci_alloc_consistent(adapter->pdev, + bufsize, + &rx_ring->pFbr1RingPa); + if (!rx_ring->pFbr1RingVa) { + DBG_ERROR(et131x_dbginfo, + "Cannot alloc memory for Free Buffer Ring 1\n"); + DBG_LEAVE(et131x_dbginfo); + return -ENOMEM; + } + + /* Save physical address + * + * NOTE: pci_alloc_consistent(), used above to alloc DMA regions, + * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses + * are ever returned, make sure the high part is retrieved here + * before storing the adjusted address. + */ + rx_ring->Fbr1Realpa = rx_ring->pFbr1RingPa; + + /* Align Free Buffer Ring 1 on a 4K boundary */ + et131x_align_allocated_memory(adapter, + &rx_ring->Fbr1Realpa, + &rx_ring->Fbr1offset, 0x0FFF); + + rx_ring->pFbr1RingVa = (void *)((uint8_t *) rx_ring->pFbr1RingVa + + rx_ring->Fbr1offset); + +#ifdef USE_FBR0 + /* Allocate an area of memory for Free Buffer Ring 0 */ + bufsize = (sizeof(FBR_DESC_t) * rx_ring->Fbr0NumEntries) + 0xfff; + rx_ring->pFbr0RingVa = pci_alloc_consistent(adapter->pdev, + bufsize, + &rx_ring->pFbr0RingPa); + if (!rx_ring->pFbr0RingVa) { + DBG_ERROR(et131x_dbginfo, + "Cannot alloc memory for Free Buffer Ring 0\n"); + DBG_LEAVE(et131x_dbginfo); + return -ENOMEM; + } + + /* Save physical address + * + * NOTE: pci_alloc_consistent(), used above to alloc DMA regions, + * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses + * are ever returned, make sure the high part is retrieved here before + * storing the adjusted address. + */ + rx_ring->Fbr0Realpa = rx_ring->pFbr0RingPa; + + /* Align Free Buffer Ring 0 on a 4K boundary */ + et131x_align_allocated_memory(adapter, + &rx_ring->Fbr0Realpa, + &rx_ring->Fbr0offset, 0x0FFF); + + rx_ring->pFbr0RingVa = (void *)((uint8_t *) rx_ring->pFbr0RingVa + + rx_ring->Fbr0offset); +#endif + + for (OuterLoop = 0; OuterLoop < (rx_ring->Fbr1NumEntries / FBR_CHUNKS); + OuterLoop++) { + uint64_t Fbr1Offset; + uint64_t Fbr1TempPa; + uint32_t Fbr1Align; + + /* This code allocates an area of memory big enough for N + * free buffers + (buffer_size - 1) so that the buffers can + * be aligned on 4k boundaries. If each buffer were aligned + * to a buffer_size boundary, the effect would be to double + * the size of FBR0. By allocating N buffers at once, we + * reduce this overhead. + */ + if (rx_ring->Fbr1BufferSize > 4096) { + Fbr1Align = 4096; + } else { + Fbr1Align = rx_ring->Fbr1BufferSize; + } + + FBRChunkSize = + (FBR_CHUNKS * rx_ring->Fbr1BufferSize) + Fbr1Align - 1; + rx_ring->Fbr1MemVa[OuterLoop] = + pci_alloc_consistent(adapter->pdev, FBRChunkSize, + &rx_ring->Fbr1MemPa[OuterLoop]); + + if (!rx_ring->Fbr1MemVa[OuterLoop]) { + DBG_ERROR(et131x_dbginfo, "Could not alloc memory\n"); + DBG_LEAVE(et131x_dbginfo); + return -ENOMEM; + } + + /* See NOTE in "Save Physical Address" comment above */ + Fbr1TempPa = rx_ring->Fbr1MemPa[OuterLoop]; + + et131x_align_allocated_memory(adapter, + &Fbr1TempPa, + &Fbr1Offset, (Fbr1Align - 1)); + + for (InnerLoop = 0; InnerLoop < FBR_CHUNKS; InnerLoop++) { + uint32_t index = (OuterLoop * FBR_CHUNKS) + InnerLoop; + + /* Save the Virtual address of this index for quick + * access later + */ + rx_ring->Fbr[1]->Va[index] = + (uint8_t *) rx_ring->Fbr1MemVa[OuterLoop] + + (InnerLoop * rx_ring->Fbr1BufferSize) + Fbr1Offset; + + /* now store the physical address in the descriptor + * so the device can access it + */ + rx_ring->Fbr[1]->PAHigh[index] = + (uint32_t) (Fbr1TempPa >> 32); + rx_ring->Fbr[1]->PALow[index] = (uint32_t) Fbr1TempPa; + + Fbr1TempPa += rx_ring->Fbr1BufferSize; + + rx_ring->Fbr[1]->Buffer1[index] = + rx_ring->Fbr[1]->Va[index]; + rx_ring->Fbr[1]->Buffer2[index] = + rx_ring->Fbr[1]->Va[index] - 4; + } + } + +#ifdef USE_FBR0 + /* Same for FBR0 (if in use) */ + for (OuterLoop = 0; OuterLoop < (rx_ring->Fbr0NumEntries / FBR_CHUNKS); + OuterLoop++) { + uint64_t Fbr0Offset; + uint64_t Fbr0TempPa; + + FBRChunkSize = ((FBR_CHUNKS + 1) * rx_ring->Fbr0BufferSize) - 1; + rx_ring->Fbr0MemVa[OuterLoop] = + pci_alloc_consistent(adapter->pdev, FBRChunkSize, + &rx_ring->Fbr0MemPa[OuterLoop]); + + if (!rx_ring->Fbr0MemVa[OuterLoop]) { + DBG_ERROR(et131x_dbginfo, "Could not alloc memory\n"); + DBG_LEAVE(et131x_dbginfo); + return -ENOMEM; + } + + /* See NOTE in "Save Physical Address" comment above */ + Fbr0TempPa = rx_ring->Fbr0MemPa[OuterLoop]; + + et131x_align_allocated_memory(adapter, + &Fbr0TempPa, + &Fbr0Offset, + rx_ring->Fbr0BufferSize - 1); + + for (InnerLoop = 0; InnerLoop < FBR_CHUNKS; InnerLoop++) { + uint32_t index = (OuterLoop * FBR_CHUNKS) + InnerLoop; + + rx_ring->Fbr[0]->Va[index] = + (uint8_t *) rx_ring->Fbr0MemVa[OuterLoop] + + (InnerLoop * rx_ring->Fbr0BufferSize) + Fbr0Offset; + + rx_ring->Fbr[0]->PAHigh[index] = + (uint32_t) (Fbr0TempPa >> 32); + rx_ring->Fbr[0]->PALow[index] = (uint32_t) Fbr0TempPa; + + Fbr0TempPa += rx_ring->Fbr0BufferSize; + + rx_ring->Fbr[0]->Buffer1[index] = + rx_ring->Fbr[0]->Va[index]; + rx_ring->Fbr[0]->Buffer2[index] = + rx_ring->Fbr[0]->Va[index] - 4; + } + } +#endif + + /* Allocate an area of memory for FIFO of Packet Status ring entries */ + pktStatRingSize = + sizeof(PKT_STAT_DESC_t) * adapter->RxRing.PsrNumEntries; + + rx_ring->pPSRingVa = pci_alloc_consistent(adapter->pdev, + pktStatRingSize + 0x0fff, + &rx_ring->pPSRingPa); + + if (!rx_ring->pPSRingVa) { + DBG_ERROR(et131x_dbginfo, + "Cannot alloc memory for Packet Status Ring\n"); + DBG_LEAVE(et131x_dbginfo); + return -ENOMEM; + } + + /* Save physical address + * + * NOTE : pci_alloc_consistent(), used above to alloc DMA regions, + * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses + * are ever returned, make sure the high part is retrieved here before + * storing the adjusted address. + */ + rx_ring->pPSRingRealPa = rx_ring->pPSRingPa; + + /* Align Packet Status Ring on a 4K boundary */ + et131x_align_allocated_memory(adapter, + &rx_ring->pPSRingRealPa, + &rx_ring->pPSRingOffset, 0x0FFF); + + rx_ring->pPSRingVa = (void *)((uint8_t *) rx_ring->pPSRingVa + + rx_ring->pPSRingOffset); + + /* Allocate an area of memory for writeback of status information */ + rx_ring->pRxStatusVa = pci_alloc_consistent(adapter->pdev, + sizeof(RX_STATUS_BLOCK_t) + + 0x7, &rx_ring->pRxStatusPa); + if (!rx_ring->pRxStatusVa) { + DBG_ERROR(et131x_dbginfo, + "Cannot alloc memory for Status Block\n"); + DBG_LEAVE(et131x_dbginfo); + return -ENOMEM; + } + + /* Save physical address */ + rx_ring->RxStatusRealPA = rx_ring->pRxStatusPa; + + /* Align write back on an 8 byte boundary */ + et131x_align_allocated_memory(adapter, + &rx_ring->RxStatusRealPA, + &rx_ring->RxStatusOffset, 0x07); + + rx_ring->pRxStatusVa = (void *)((uint8_t *) rx_ring->pRxStatusVa + + rx_ring->RxStatusOffset); + rx_ring->NumRfd = NIC_DEFAULT_NUM_RFD; + + /* Recv + * pci_pool_create initializes a lookaside list. After successful + * creation, nonpaged fixed-size blocks can be allocated from and + * freed to the lookaside list. + * RFDs will be allocated from this pool. + */ + rx_ring->RecvLookaside = kmem_cache_create(adapter->netdev->name, + sizeof(MP_RFD), + 0, + SLAB_CACHE_DMA | + SLAB_HWCACHE_ALIGN, + NULL); + + MP_SET_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE); + + /* The RFDs are going to be put on lists later on, so initialize the + * lists now. + */ + INIT_LIST_HEAD(&rx_ring->RecvList); + INIT_LIST_HEAD(&rx_ring->RecvPendingList); + + DBG_LEAVE(et131x_dbginfo); + return 0; +} + +/** + * et131x_rx_dma_memory_free - Free all memory allocated within this module. + * @adapter: pointer to our private adapter structure + */ +void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) +{ + uint32_t index; + uint32_t bufsize; + uint32_t pktStatRingSize; + PMP_RFD pMpRfd; + RX_RING_t *rx_ring; + + DBG_ENTER(et131x_dbginfo); + + /* Setup some convenience pointers */ + rx_ring = (RX_RING_t *) & adapter->RxRing; + + /* Free RFDs and associated packet descriptors */ + DBG_ASSERT(rx_ring->nReadyRecv == rx_ring->NumRfd); + + while (!list_empty(&rx_ring->RecvList)) { + pMpRfd = (MP_RFD *) list_entry(rx_ring->RecvList.next, + MP_RFD, list_node); + + list_del(&pMpRfd->list_node); + et131x_rfd_resources_free(adapter, pMpRfd); + } + + while (!list_empty(&rx_ring->RecvPendingList)) { + pMpRfd = (MP_RFD *) list_entry(rx_ring->RecvPendingList.next, + MP_RFD, list_node); + list_del(&pMpRfd->list_node); + et131x_rfd_resources_free(adapter, pMpRfd); + } + + /* Free Free Buffer Ring 1 */ + if (rx_ring->pFbr1RingVa) { + /* First the packet memory */ + for (index = 0; index < + (rx_ring->Fbr1NumEntries / FBR_CHUNKS); index++) { + if (rx_ring->Fbr1MemVa[index]) { + uint32_t Fbr1Align; + + if (rx_ring->Fbr1BufferSize > 4096) { + Fbr1Align = 4096; + } else { + Fbr1Align = rx_ring->Fbr1BufferSize; + } + + bufsize = + (rx_ring->Fbr1BufferSize * FBR_CHUNKS) + + Fbr1Align - 1; + + pci_free_consistent(adapter->pdev, + bufsize, + rx_ring->Fbr1MemVa[index], + rx_ring->Fbr1MemPa[index]); + + rx_ring->Fbr1MemVa[index] = NULL; + } + } + + /* Now the FIFO itself */ + rx_ring->pFbr1RingVa = (void *)((uint8_t *) rx_ring->pFbr1RingVa - + rx_ring->Fbr1offset); + + bufsize = + (sizeof(FBR_DESC_t) * rx_ring->Fbr1NumEntries) + 0xfff; + + pci_free_consistent(adapter->pdev, + bufsize, + rx_ring->pFbr1RingVa, rx_ring->pFbr1RingPa); + + rx_ring->pFbr1RingVa = NULL; + } + +#ifdef USE_FBR0 + /* Now the same for Free Buffer Ring 0 */ + if (rx_ring->pFbr0RingVa) { + /* First the packet memory */ + for (index = 0; index < + (rx_ring->Fbr0NumEntries / FBR_CHUNKS); index++) { + if (rx_ring->Fbr0MemVa[index]) { + bufsize = + (rx_ring->Fbr0BufferSize * + (FBR_CHUNKS + 1)) - 1; + + pci_free_consistent(adapter->pdev, + bufsize, + rx_ring->Fbr0MemVa[index], + rx_ring->Fbr0MemPa[index]); + + rx_ring->Fbr0MemVa[index] = NULL; + } + } + + /* Now the FIFO itself */ + rx_ring->pFbr0RingVa = (void *)((uint8_t *) rx_ring->pFbr0RingVa - + rx_ring->Fbr0offset); + + bufsize = + (sizeof(FBR_DESC_t) * rx_ring->Fbr0NumEntries) + 0xfff; + + pci_free_consistent(adapter->pdev, + bufsize, + rx_ring->pFbr0RingVa, rx_ring->pFbr0RingPa); + + rx_ring->pFbr0RingVa = NULL; + } +#endif + + /* Free Packet Status Ring */ + if (rx_ring->pPSRingVa) { + rx_ring->pPSRingVa = (void *)((uint8_t *) rx_ring->pPSRingVa - + rx_ring->pPSRingOffset); + + pktStatRingSize = + sizeof(PKT_STAT_DESC_t) * adapter->RxRing.PsrNumEntries; + + pci_free_consistent(adapter->pdev, + pktStatRingSize + 0x0fff, + rx_ring->pPSRingVa, rx_ring->pPSRingPa); + + rx_ring->pPSRingVa = NULL; + } + + /* Free area of memory for the writeback of status information */ + if (rx_ring->pRxStatusVa) { + rx_ring->pRxStatusVa = (void *)((uint8_t *) rx_ring->pRxStatusVa - + rx_ring->RxStatusOffset); + + pci_free_consistent(adapter->pdev, + sizeof(RX_STATUS_BLOCK_t) + 0x7, + rx_ring->pRxStatusVa, rx_ring->pRxStatusPa); + + rx_ring->pRxStatusVa = NULL; + } + + /* Free receive buffer pool */ + + /* Free receive packet pool */ + + /* Destroy the lookaside (RFD) pool */ + if (MP_TEST_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE)) { + kmem_cache_destroy(rx_ring->RecvLookaside); + MP_CLEAR_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE); + } + + /* Free the FBR Lookup Table */ +#ifdef USE_FBR0 + kfree(rx_ring->Fbr[0]); +#endif + + kfree(rx_ring->Fbr[1]); + + /* Reset Counters */ + rx_ring->nReadyRecv = 0; + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_init_recv - Initialize receive data structures. + * @adapter: pointer to our private adapter structure + * + * Returns 0 on success and errno on failure (as defined in errno.h) + */ +int et131x_init_recv(struct et131x_adapter *adapter) +{ + int status = -ENOMEM; + PMP_RFD pMpRfd = NULL; + uint32_t RfdCount; + uint32_t TotalNumRfd = 0; + RX_RING_t *rx_ring = NULL; + + DBG_ENTER(et131x_dbginfo); + + /* Setup some convenience pointers */ + rx_ring = (RX_RING_t *) & adapter->RxRing; + + /* Setup each RFD */ + for (RfdCount = 0; RfdCount < rx_ring->NumRfd; RfdCount++) { + pMpRfd = (MP_RFD *) kmem_cache_alloc(rx_ring->RecvLookaside, + GFP_ATOMIC | GFP_DMA); + + if (!pMpRfd) { + DBG_ERROR(et131x_dbginfo, + "Couldn't alloc RFD out of kmem_cache\n"); + status = -ENOMEM; + continue; + } + + status = et131x_rfd_resources_alloc(adapter, pMpRfd); + if (status != 0) { + DBG_ERROR(et131x_dbginfo, + "Couldn't alloc packet for RFD\n"); + kmem_cache_free(rx_ring->RecvLookaside, pMpRfd); + continue; + } + + /* Add this RFD to the RecvList */ + list_add_tail(&pMpRfd->list_node, &rx_ring->RecvList); + + /* Increment both the available RFD's, and the total RFD's. */ + rx_ring->nReadyRecv++; + TotalNumRfd++; + } + + if (TotalNumRfd > NIC_MIN_NUM_RFD) { + status = 0; + } + + rx_ring->NumRfd = TotalNumRfd; + + if (status != 0) { + kmem_cache_free(rx_ring->RecvLookaside, pMpRfd); + DBG_ERROR(et131x_dbginfo, + "Allocation problems in et131x_init_recv\n"); + } + + DBG_LEAVE(et131x_dbginfo); + return status; +} + +/** + * et131x_rfd_resources_alloc + * @adapter: pointer to our private adapter structure + * @pMpRfd: pointer to a RFD + * + * Returns 0 on success and errno on failure (as defined in errno.h) + */ +int et131x_rfd_resources_alloc(struct et131x_adapter *adapter, MP_RFD *pMpRfd) +{ + pMpRfd->Packet = NULL; + + return 0; +} + +/** + * et131x_rfd_resources_free - Free the packet allocated for the given RFD + * @adapter: pointer to our private adapter structure + * @pMpRfd: pointer to a RFD + */ +void et131x_rfd_resources_free(struct et131x_adapter *adapter, MP_RFD *pMpRfd) +{ + pMpRfd->Packet = NULL; + kmem_cache_free(adapter->RxRing.RecvLookaside, pMpRfd); +} + +/** + * ConfigRxDmaRegs - Start of Rx_DMA init sequence + * @pAdapter: pointer to our adapter structure + */ +void ConfigRxDmaRegs(struct et131x_adapter *pAdapter) +{ + struct _RXDMA_t __iomem *pRxDma = &pAdapter->CSRAddress->rxdma; + struct _rx_ring_t *pRxLocal = &pAdapter->RxRing; + PFBR_DESC_t pFbrEntry; + uint32_t iEntry; + RXDMA_PSR_NUM_DES_t psr_num_des; + unsigned long lockflags; + + DBG_ENTER(et131x_dbginfo); + + /* Halt RXDMA to perform the reconfigure. */ + et131x_rx_dma_disable(pAdapter); + + /* Load the completion writeback physical address + * + * NOTE : pci_alloc_consistent(), used above to alloc DMA regions, + * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses + * are ever returned, make sure the high part is retrieved here + * before storing the adjusted address. + */ + writel((uint32_t) (pRxLocal->RxStatusRealPA >> 32), + &pRxDma->dma_wb_base_hi); + writel((uint32_t) pRxLocal->RxStatusRealPA, &pRxDma->dma_wb_base_lo); + + memset(pRxLocal->pRxStatusVa, 0, sizeof(RX_STATUS_BLOCK_t)); + + /* Set the address and parameters of the packet status ring into the + * 1310's registers + */ + writel((uint32_t) (pRxLocal->pPSRingRealPa >> 32), + &pRxDma->psr_base_hi); + writel((uint32_t) pRxLocal->pPSRingRealPa, &pRxDma->psr_base_lo); + writel(pRxLocal->PsrNumEntries - 1, &pRxDma->psr_num_des.value); + writel(0, &pRxDma->psr_full_offset.value); + + psr_num_des.value = readl(&pRxDma->psr_num_des.value); + writel((psr_num_des.bits.psr_ndes * LO_MARK_PERCENT_FOR_PSR) / 100, + &pRxDma->psr_min_des.value); + + spin_lock_irqsave(&pAdapter->RcvLock, lockflags); + + /* These local variables track the PSR in the adapter structure */ + pRxLocal->local_psr_full.bits.psr_full = 0; + pRxLocal->local_psr_full.bits.psr_full_wrap = 0; + + /* Now's the best time to initialize FBR1 contents */ + pFbrEntry = (PFBR_DESC_t) pRxLocal->pFbr1RingVa; + for (iEntry = 0; iEntry < pRxLocal->Fbr1NumEntries; iEntry++) { + pFbrEntry->addr_hi = pRxLocal->Fbr[1]->PAHigh[iEntry]; + pFbrEntry->addr_lo = pRxLocal->Fbr[1]->PALow[iEntry]; + pFbrEntry->word2.bits.bi = iEntry; + pFbrEntry++; + } + + /* Set the address and parameters of Free buffer ring 1 (and 0 if + * required) into the 1310's registers + */ + writel((uint32_t) (pRxLocal->Fbr1Realpa >> 32), &pRxDma->fbr1_base_hi); + writel((uint32_t) pRxLocal->Fbr1Realpa, &pRxDma->fbr1_base_lo); + writel(pRxLocal->Fbr1NumEntries - 1, &pRxDma->fbr1_num_des.value); + + { + DMA10W_t fbr1_full = { 0 }; + + fbr1_full.bits.val = 0; + fbr1_full.bits.wrap = 1; + writel(fbr1_full.value, &pRxDma->fbr1_full_offset.value); + } + + /* This variable tracks the free buffer ring 1 full position, so it + * has to match the above. + */ + pRxLocal->local_Fbr1_full.bits.val = 0; + pRxLocal->local_Fbr1_full.bits.wrap = 1; + writel(((pRxLocal->Fbr1NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1, + &pRxDma->fbr1_min_des.value); + +#ifdef USE_FBR0 + /* Now's the best time to initialize FBR0 contents */ + pFbrEntry = (PFBR_DESC_t) pRxLocal->pFbr0RingVa; + for (iEntry = 0; iEntry < pRxLocal->Fbr0NumEntries; iEntry++) { + pFbrEntry->addr_hi = pRxLocal->Fbr[0]->PAHigh[iEntry]; + pFbrEntry->addr_lo = pRxLocal->Fbr[0]->PALow[iEntry]; + pFbrEntry->word2.bits.bi = iEntry; + pFbrEntry++; + } + + writel((uint32_t) (pRxLocal->Fbr0Realpa >> 32), &pRxDma->fbr0_base_hi); + writel((uint32_t) pRxLocal->Fbr0Realpa, &pRxDma->fbr0_base_lo); + writel(pRxLocal->Fbr0NumEntries - 1, &pRxDma->fbr0_num_des.value); + + { + DMA10W_t fbr0_full = { 0 }; + + fbr0_full.bits.val = 0; + fbr0_full.bits.wrap = 1; + writel(fbr0_full.value, &pRxDma->fbr0_full_offset.value); + } + + /* This variable tracks the free buffer ring 0 full position, so it + * has to match the above. + */ + pRxLocal->local_Fbr0_full.bits.val = 0; + pRxLocal->local_Fbr0_full.bits.wrap = 1; + writel(((pRxLocal->Fbr0NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1, + &pRxDma->fbr0_min_des.value); +#endif + + /* Program the number of packets we will receive before generating an + * interrupt. + * For version B silicon, this value gets updated once autoneg is + *complete. + */ + writel(pAdapter->RegistryRxNumBuffers, &pRxDma->num_pkt_done.value); + + /* The "time_done" is not working correctly to coalesce interrupts + * after a given time period, but rather is giving us an interrupt + * regardless of whether we have received packets. + * This value gets updated once autoneg is complete. + */ + writel(pAdapter->RegistryRxTimeInterval, &pRxDma->max_pkt_time.value); + + spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * SetRxDmaTimer - Set the heartbeat timer according to line rate. + * @pAdapter: pointer to our adapter structure + */ +void SetRxDmaTimer(struct et131x_adapter *pAdapter) +{ + /* For version B silicon, we do not use the RxDMA timer for 10 and 100 + * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing. + */ + if ((pAdapter->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) || + (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS)) { + writel(0, &pAdapter->CSRAddress->rxdma.max_pkt_time.value); + writel(1, &pAdapter->CSRAddress->rxdma.num_pkt_done.value); + } +} + +/** + * et131x_rx_dma_disable - Stop of Rx_DMA on the ET1310 + * @pAdapter: pointer to our adapter structure + */ +void et131x_rx_dma_disable(struct et131x_adapter *pAdapter) +{ + RXDMA_CSR_t csr; + + DBG_ENTER(et131x_dbginfo); + + /* Setup the receive dma configuration register */ + writel(0x00002001, &pAdapter->CSRAddress->rxdma.csr.value); + csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value); + if (csr.bits.halt_status != 1) { + udelay(5); + csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value); + if (csr.bits.halt_status != 1) { + DBG_ERROR(et131x_dbginfo, + "RX Dma failed to enter halt state. CSR 0x%08x\n", + csr.value); + } + } + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_rx_dma_enable - re-start of Rx_DMA on the ET1310. + * @pAdapter: pointer to our adapter structure + */ +void et131x_rx_dma_enable(struct et131x_adapter *pAdapter) +{ + DBG_RX_ENTER(et131x_dbginfo); + + if (pAdapter->RegistryPhyLoopbk) { + /* RxDMA is disabled for loopback operation. */ + writel(0x1, &pAdapter->CSRAddress->rxdma.csr.value); + } else { + /* Setup the receive dma configuration register for normal operation */ + RXDMA_CSR_t csr = { 0 }; + + csr.bits.fbr1_enable = 1; + if (pAdapter->RxRing.Fbr1BufferSize == 4096) { + csr.bits.fbr1_size = 1; + } else if (pAdapter->RxRing.Fbr1BufferSize == 8192) { + csr.bits.fbr1_size = 2; + } else if (pAdapter->RxRing.Fbr1BufferSize == 16384) { + csr.bits.fbr1_size = 3; + } +#ifdef USE_FBR0 + csr.bits.fbr0_enable = 1; + if (pAdapter->RxRing.Fbr0BufferSize == 256) { + csr.bits.fbr0_size = 1; + } else if (pAdapter->RxRing.Fbr0BufferSize == 512) { + csr.bits.fbr0_size = 2; + } else if (pAdapter->RxRing.Fbr0BufferSize == 1024) { + csr.bits.fbr0_size = 3; + } +#endif + writel(csr.value, &pAdapter->CSRAddress->rxdma.csr.value); + + csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value); + if (csr.bits.halt_status != 0) { + udelay(5); + csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value); + if (csr.bits.halt_status != 0) { + DBG_ERROR(et131x_dbginfo, + "RX Dma failed to exit halt state. CSR 0x%08x\n", + csr.value); + } + } + } + + DBG_RX_LEAVE(et131x_dbginfo); +} + +/** + * nic_rx_pkts - Checks the hardware for available packets + * @pAdapter: pointer to our adapter + * + * Returns pMpRfd, a pointer to our MPRFD. + * + * Checks the hardware for available packets, using completion ring + * If packets are available, it gets an RFD from the RecvList, attaches + * the packet to it, puts the RFD in the RecvPendList, and also returns + * the pointer to the RFD. + */ +PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) +{ + struct _rx_ring_t *pRxLocal = &pAdapter->RxRing; + PRX_STATUS_BLOCK_t pRxStatusBlock; + PPKT_STAT_DESC_t pPSREntry; + PMP_RFD pMpRfd; + uint32_t nIndex; + uint8_t *pBufVa; + unsigned long lockflags; + struct list_head *element; + uint8_t ringIndex; + uint16_t bufferIndex; + uint32_t localLen; + PKT_STAT_DESC_WORD0_t Word0; + + + DBG_RX_ENTER(et131x_dbginfo); + + /* RX Status block is written by the DMA engine prior to every + * interrupt. It contains the next to be used entry in the Packet + * Status Ring, and also the two Free Buffer rings. + */ + pRxStatusBlock = (PRX_STATUS_BLOCK_t) pRxLocal->pRxStatusVa; + + if (pRxStatusBlock->Word1.bits.PSRoffset == + pRxLocal->local_psr_full.bits.psr_full && + pRxStatusBlock->Word1.bits.PSRwrap == + pRxLocal->local_psr_full.bits.psr_full_wrap) { + /* Looks like this ring is not updated yet */ + DBG_RX(et131x_dbginfo, "(0)\n"); + DBG_RX_LEAVE(et131x_dbginfo); + return NULL; + } + + /* The packet status ring indicates that data is available. */ + pPSREntry = (PPKT_STAT_DESC_t) (pRxLocal->pPSRingVa) + + pRxLocal->local_psr_full.bits.psr_full; + + /* Grab any information that is required once the PSR is + * advanced, since we can no longer rely on the memory being + * accurate + */ + localLen = pPSREntry->word1.bits.length; + ringIndex = (uint8_t) pPSREntry->word1.bits.ri; + bufferIndex = (uint16_t) pPSREntry->word1.bits.bi; + Word0 = pPSREntry->word0; + + DBG_RX(et131x_dbginfo, "RX PACKET STATUS\n"); + DBG_RX(et131x_dbginfo, "\tlength : %d\n", localLen); + DBG_RX(et131x_dbginfo, "\tringIndex : %d\n", ringIndex); + DBG_RX(et131x_dbginfo, "\tbufferIndex : %d\n", bufferIndex); + DBG_RX(et131x_dbginfo, "\tword0 : 0x%08x\n", Word0.value); + +#if 0 + /* Check the Status Word that the MAC has appended to the PSR + * entry in case the MAC has detected errors. + */ + if (Word0.value & ALCATEL_BAD_STATUS) { + DBG_ERROR(et131x_dbginfo, + "NICRxPkts >> Alcatel Status Word error." + "Value 0x%08x\n", pPSREntry->word0.value); + } +#endif + + /* Indicate that we have used this PSR entry. */ + if (++pRxLocal->local_psr_full.bits.psr_full > + pRxLocal->PsrNumEntries - 1) { + pRxLocal->local_psr_full.bits.psr_full = 0; + pRxLocal->local_psr_full.bits.psr_full_wrap ^= 1; + } + + writel(pRxLocal->local_psr_full.value, + &pAdapter->CSRAddress->rxdma.psr_full_offset.value); + +#ifndef USE_FBR0 + if (ringIndex != 1) { + DBG_ERROR(et131x_dbginfo, + "NICRxPkts PSR Entry %d indicates " + "Buffer Ring 0 in use\n", + pRxLocal->local_psr_full.bits.psr_full); + DBG_RX_LEAVE(et131x_dbginfo); + return NULL; + } +#endif + +#ifdef USE_FBR0 + if (ringIndex > 1 || + (ringIndex == 0 && + bufferIndex > pRxLocal->Fbr0NumEntries - 1) || + (ringIndex == 1 && + bufferIndex > pRxLocal->Fbr1NumEntries - 1)) +#else + if (ringIndex != 1 || + bufferIndex > pRxLocal->Fbr1NumEntries - 1) +#endif + { + /* Illegal buffer or ring index cannot be used by S/W*/ + DBG_ERROR(et131x_dbginfo, + "NICRxPkts PSR Entry %d indicates " + "length of %d and/or bad bi(%d)\n", + pRxLocal->local_psr_full.bits.psr_full, + localLen, bufferIndex); + DBG_RX_LEAVE(et131x_dbginfo); + return NULL; + } + + /* Get and fill the RFD. */ + spin_lock_irqsave(&pAdapter->RcvLock, lockflags); + + pMpRfd = NULL; + element = pRxLocal->RecvList.next; + pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node); + + if (pMpRfd == NULL) { + DBG_RX(et131x_dbginfo, + "NULL RFD returned from RecvList via list_entry()\n"); + DBG_RX_LEAVE(et131x_dbginfo); + spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags); + return NULL; + } + + list_del(&pMpRfd->list_node); + pRxLocal->nReadyRecv--; + + spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags); + + pMpRfd->iBufferIndex = bufferIndex; + pMpRfd->iRingIndex = ringIndex; + + /* In V1 silicon, there is a bug which screws up filtering of + * runt packets. Therefore runt packet filtering is disabled + * in the MAC and the packets are dropped here. They are + * also counted here. + */ + if (localLen < (NIC_MIN_PACKET_SIZE + 4)) { + pAdapter->Stats.other_errors++; + localLen = 0; + } + + if (localLen) { + if (pAdapter->ReplicaPhyLoopbk == 1) { + pBufVa = pRxLocal->Fbr[ringIndex]->Va[bufferIndex]; + + if (memcmp(&pBufVa[6], &pAdapter->CurrentAddress[0], + ETH_ALEN) == 0) { + if (memcmp(&pBufVa[42], "Replica packet", + ETH_HLEN)) { + pAdapter->ReplicaPhyLoopbkPF = 1; + } + } + DBG_WARNING(et131x_dbginfo, + "pBufVa:\t%02x:%02x:%02x:%02x:%02x:%02x\n", + pBufVa[6], pBufVa[7], pBufVa[8], + pBufVa[9], pBufVa[10], pBufVa[11]); + + DBG_WARNING(et131x_dbginfo, + "CurrentAddr:\t%02x:%02x:%02x:%02x:%02x:%02x\n", + pAdapter->CurrentAddress[0], + pAdapter->CurrentAddress[1], + pAdapter->CurrentAddress[2], + pAdapter->CurrentAddress[3], + pAdapter->CurrentAddress[4], + pAdapter->CurrentAddress[5]); + } + + /* Determine if this is a multicast packet coming in */ + if ((Word0.value & ALCATEL_MULTICAST_PKT) && + !(Word0.value & ALCATEL_BROADCAST_PKT)) { + /* Promiscuous mode and Multicast mode are + * not mutually exclusive as was first + * thought. I guess Promiscuous is just + * considered a super-set of the other + * filters. Generally filter is 0x2b when in + * promiscuous mode. + */ + if ((pAdapter->PacketFilter & ET131X_PACKET_TYPE_MULTICAST) + && !(pAdapter->PacketFilter & ET131X_PACKET_TYPE_PROMISCUOUS) + && !(pAdapter->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST)) { + pBufVa = pRxLocal->Fbr[ringIndex]-> + Va[bufferIndex]; + + /* Loop through our list to see if the + * destination address of this packet + * matches one in our list. + */ + for (nIndex = 0; + nIndex < pAdapter->MCAddressCount; + nIndex++) { + if (pBufVa[0] == + pAdapter->MCList[nIndex][0] + && pBufVa[1] == + pAdapter->MCList[nIndex][1] + && pBufVa[2] == + pAdapter->MCList[nIndex][2] + && pBufVa[3] == + pAdapter->MCList[nIndex][3] + && pBufVa[4] == + pAdapter->MCList[nIndex][4] + && pBufVa[5] == + pAdapter->MCList[nIndex][5]) { + break; + } + } + + /* If our index is equal to the number + * of Multicast address we have, then + * this means we did not find this + * packet's matching address in our + * list. Set the PacketSize to zero, + * so we free our RFD when we return + * from this function. + */ + if (nIndex == pAdapter->MCAddressCount) { + localLen = 0; + } + } + + if (localLen > 0) { + pAdapter->Stats.multircv++; + } + } else if (Word0.value & ALCATEL_BROADCAST_PKT) { + pAdapter->Stats.brdcstrcv++; + } else { + /* Not sure what this counter measures in + * promiscuous mode. Perhaps we should check + * the MAC address to see if it is directed + * to us in promiscuous mode. + */ + pAdapter->Stats.unircv++; + } + } + + if (localLen > 0) { + struct sk_buff *skb = NULL; + + //pMpRfd->PacketSize = localLen - 4; + pMpRfd->PacketSize = localLen; + + skb = dev_alloc_skb(pMpRfd->PacketSize + 2); + if (!skb) { + DBG_ERROR(et131x_dbginfo, + "Couldn't alloc an SKB for Rx\n"); + DBG_RX_LEAVE(et131x_dbginfo); + return NULL; + } + + pAdapter->net_stats.rx_bytes += pMpRfd->PacketSize; + + memcpy(skb_put(skb, pMpRfd->PacketSize), + pRxLocal->Fbr[ringIndex]->Va[bufferIndex], + pMpRfd->PacketSize); + + skb->dev = pAdapter->netdev; + skb->protocol = eth_type_trans(skb, pAdapter->netdev); + skb->ip_summed = CHECKSUM_NONE; + + netif_rx(skb); + } else { + pMpRfd->PacketSize = 0; + } + + nic_return_rfd(pAdapter, pMpRfd); + + DBG_RX(et131x_dbginfo, "(1)\n"); + DBG_RX_LEAVE(et131x_dbginfo); + return pMpRfd; +} + +/** + * et131x_reset_recv - Reset the receive list + * @pAdapter: pointer to our adapter + * + * Assumption, Rcv spinlock has been acquired. + */ +void et131x_reset_recv(struct et131x_adapter *pAdapter) +{ + PMP_RFD pMpRfd; + struct list_head *element; + + DBG_ENTER(et131x_dbginfo); + + DBG_ASSERT(!list_empty(&pAdapter->RxRing.RecvList)); + + /* Take all the RFD's from the pending list, and stick them on the + * RecvList. + */ + while (!list_empty(&pAdapter->RxRing.RecvPendingList)) { + element = pAdapter->RxRing.RecvPendingList.next; + + pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node); + + list_del(&pMpRfd->list_node); + list_add_tail(&pMpRfd->list_node, &pAdapter->RxRing.RecvList); + } + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_handle_recv_interrupt - Interrupt handler for receive processing + * @pAdapter: pointer to our adapter + * + * Assumption, Rcv spinlock has been acquired. + */ +void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter) +{ + PMP_RFD pMpRfd = NULL; + struct sk_buff *PacketArray[NUM_PACKETS_HANDLED]; + PMP_RFD RFDFreeArray[NUM_PACKETS_HANDLED]; + uint32_t PacketArrayCount = 0; + uint32_t PacketsToHandle; + uint32_t PacketFreeCount = 0; + bool TempUnfinishedRec = false; + + DBG_RX_ENTER(et131x_dbginfo); + + PacketsToHandle = NUM_PACKETS_HANDLED; + + /* Process up to available RFD's */ + while (PacketArrayCount < PacketsToHandle) { + if (list_empty(&pAdapter->RxRing.RecvList)) { + DBG_ASSERT(pAdapter->RxRing.nReadyRecv == 0); + DBG_ERROR(et131x_dbginfo, "NO RFD's !!!!!!!!!!!!!\n"); + TempUnfinishedRec = true; + break; + } + + pMpRfd = nic_rx_pkts(pAdapter); + + if (pMpRfd == NULL) { + break; + } + + /* Do not receive any packets until a filter has been set. + * Do not receive any packets until we are at D0. + * Do not receive any packets until we have link. + * If length is zero, return the RFD in order to advance the + * Free buffer ring. + */ + if ((!pAdapter->PacketFilter) || + (pAdapter->PoMgmt.PowerState != NdisDeviceStateD0) || + (!MP_LINK_DETECTED(pAdapter)) || + (pMpRfd->PacketSize == 0)) { + continue; + } + + /* Increment the number of packets we received */ + pAdapter->Stats.ipackets++; + + /* Set the status on the packet, either resources or success */ + if (pAdapter->RxRing.nReadyRecv >= RFD_LOW_WATER_MARK) { + /* Put this RFD on the pending list + * + * NOTE: nic_rx_pkts() above is already returning the + * RFD to the RecvList, so don't additionally do that + * here. + * Besides, we don't really need (at this point) the + * pending list anyway. + */ + //spin_lock_irqsave( &pAdapter->RcvPendLock, lockflags ); + //list_add_tail( &pMpRfd->list_node, &pAdapter->RxRing.RecvPendingList ); + //spin_unlock_irqrestore( &pAdapter->RcvPendLock, lockflags ); + + /* Update the number of outstanding Recvs */ + //MP_INC_RCV_REF( pAdapter ); + } else { + RFDFreeArray[PacketFreeCount] = pMpRfd; + PacketFreeCount++; + + DBG_WARNING(et131x_dbginfo, + "RFD's are running out !!!!!!!!!!!!!\n"); + } + + PacketArray[PacketArrayCount] = pMpRfd->Packet; + PacketArrayCount++; + } + + if ((PacketArrayCount == NUM_PACKETS_HANDLED) || TempUnfinishedRec) { + pAdapter->RxRing.UnfinishedReceives = true; + writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO, + &pAdapter->CSRAddress->global.watchdog_timer); + } else { + /* Watchdog timer will disable itself if appropriate. */ + pAdapter->RxRing.UnfinishedReceives = false; + } + + DBG_RX_LEAVE(et131x_dbginfo); +} + +/** + * NICReturnRFD - Recycle a RFD and put it back onto the receive list + * @pAdapter: pointer to our adapter + * @pMpRfd: pointer to the RFD + */ +void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd) +{ + struct _rx_ring_t *pRxLocal = &pAdapter->RxRing; + struct _RXDMA_t __iomem *pRxDma = &pAdapter->CSRAddress->rxdma; + uint16_t bi = pMpRfd->iBufferIndex; + uint8_t ri = pMpRfd->iRingIndex; + unsigned long lockflags; + + DBG_RX_ENTER(et131x_dbginfo); + + /* We don't use any of the OOB data besides status. Otherwise, we + * need to clean up OOB data + */ + if ( +#ifdef USE_FBR0 + (ri == 0 && bi < pRxLocal->Fbr0NumEntries) || +#endif + (ri == 1 && bi < pRxLocal->Fbr1NumEntries)) { + spin_lock_irqsave(&pAdapter->FbrLock, lockflags); + + if (ri == 1) { + PFBR_DESC_t pNextDesc = + (PFBR_DESC_t) (pRxLocal->pFbr1RingVa) + + pRxLocal->local_Fbr1_full.bits.val; + + /* Handle the Free Buffer Ring advancement here. Write + * the PA / Buffer Index for the returned buffer into + * the oldest (next to be freed)FBR entry + */ + pNextDesc->addr_hi = pRxLocal->Fbr[1]->PAHigh[bi]; + pNextDesc->addr_lo = pRxLocal->Fbr[1]->PALow[bi]; + pNextDesc->word2.value = bi; + + if (++pRxLocal->local_Fbr1_full.bits.val > + (pRxLocal->Fbr1NumEntries - 1)) { + pRxLocal->local_Fbr1_full.bits.val = 0; + pRxLocal->local_Fbr1_full.bits.wrap ^= 1; + } + + writel(pRxLocal->local_Fbr1_full.value, + &pRxDma->fbr1_full_offset.value); + } +#ifdef USE_FBR0 + else { + PFBR_DESC_t pNextDesc = + (PFBR_DESC_t) pRxLocal->pFbr0RingVa + + pRxLocal->local_Fbr0_full.bits.val; + + /* Handle the Free Buffer Ring advancement here. Write + * the PA / Buffer Index for the returned buffer into + * the oldest (next to be freed) FBR entry + */ + pNextDesc->addr_hi = pRxLocal->Fbr[0]->PAHigh[bi]; + pNextDesc->addr_lo = pRxLocal->Fbr[0]->PALow[bi]; + pNextDesc->word2.value = bi; + + if (++pRxLocal->local_Fbr0_full.bits.val > + (pRxLocal->Fbr0NumEntries - 1)) { + pRxLocal->local_Fbr0_full.bits.val = 0; + pRxLocal->local_Fbr0_full.bits.wrap ^= 1; + } + + writel(pRxLocal->local_Fbr0_full.value, + &pRxDma->fbr0_full_offset.value); + } +#endif + spin_unlock_irqrestore(&pAdapter->FbrLock, lockflags); + } else { + DBG_ERROR(et131x_dbginfo, + "NICReturnRFD illegal Buffer Index returned\n"); + } + + /* The processing on this RFD is done, so put it back on the tail of + * our list + */ + spin_lock_irqsave(&pAdapter->RcvLock, lockflags); + list_add_tail(&pMpRfd->list_node, &pRxLocal->RecvList); + pRxLocal->nReadyRecv++; + spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags); + + DBG_ASSERT(pRxLocal->nReadyRecv <= pRxLocal->NumRfd); + DBG_RX_LEAVE(et131x_dbginfo); +} diff --git a/drivers/staging/et131x/et1310_rx.h b/drivers/staging/et131x/et1310_rx.h new file mode 100644 index 000000000000..ea66dbcd8dfc --- /dev/null +++ b/drivers/staging/et131x/et1310_rx.h @@ -0,0 +1,373 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_rx.h - Defines, structs, enums, prototypes, etc. pertaining to data + * reception. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef __ET1310_RX_H__ +#define __ET1310_RX_H__ + +#include "et1310_address_map.h" + +#define USE_FBR0 true + +#ifdef USE_FBR0 +//#define FBR0_BUFFER_SIZE 256 +#endif + +//#define FBR1_BUFFER_SIZE 2048 + +#define FBR_CHUNKS 32 + +#define MAX_DESC_PER_RING_RX 1024 + +/* number of RFDs - default and min */ +#ifdef USE_FBR0 +#define RFD_LOW_WATER_MARK 40 +#define NIC_MIN_NUM_RFD 64 +#define NIC_DEFAULT_NUM_RFD 1024 +#else +#define RFD_LOW_WATER_MARK 20 +#define NIC_MIN_NUM_RFD 64 +#define NIC_DEFAULT_NUM_RFD 256 +#endif + +#define NUM_PACKETS_HANDLED 256 + +#define ALCATEL_BAD_STATUS 0xe47f0000 +#define ALCATEL_MULTICAST_PKT 0x01000000 +#define ALCATEL_BROADCAST_PKT 0x02000000 + +/* typedefs for Free Buffer Descriptors */ +typedef union _FBR_WORD2_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 reserved:22; // bits 10-31 + u32 bi:10; // bits 0-9(Buffer Index) +#else + u32 bi:10; // bits 0-9(Buffer Index) + u32 reserved:22; // bit 10-31 +#endif + } bits; +} FBR_WORD2_t, *PFBR_WORD2_t; + +typedef struct _FBR_DESC_t { + u32 addr_lo; + u32 addr_hi; + FBR_WORD2_t word2; +} FBR_DESC_t, *PFBR_DESC_t; + +/* Typedefs for Packet Status Ring Descriptors */ +typedef union _PKT_STAT_DESC_WORD0_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + // top 16 bits are from the Alcatel Status Word as enumerated in + // PE-MCXMAC Data Sheet IPD DS54 0210-1 (also IPD-DS80 0205-2) +#if 0 + u32 asw_trunc:1; // bit 31(Rx frame truncated) +#endif + u32 asw_long_evt:1; // bit 31(Rx long event) + u32 asw_VLAN_tag:1; // bit 30(VLAN tag detected) + u32 asw_unsupported_op:1; // bit 29(unsupported OP code) + u32 asw_pause_frame:1; // bit 28(is a pause frame) + u32 asw_control_frame:1; // bit 27(is a control frame) + u32 asw_dribble_nibble:1; // bit 26(spurious bits after EOP) + u32 asw_broadcast:1; // bit 25(has a broadcast address) + u32 asw_multicast:1; // bit 24(has a multicast address) + u32 asw_OK:1; // bit 23(valid CRC + no code error) + u32 asw_too_long:1; // bit 22(frame length > 1518 bytes) + u32 asw_len_chk_err:1; // bit 21(frame length field incorrect) + u32 asw_CRC_err:1; // bit 20(CRC error) + u32 asw_code_err:1; // bit 19(one or more nibbles signalled as errors) + u32 asw_false_carrier_event:1; // bit 18(bad carrier since last good packet) + u32 asw_RX_DV_event:1; // bit 17(short receive event detected) + u32 asw_prev_pkt_dropped:1;// bit 16(e.g. IFG too small on previous) + u32 unused:5; // bits 11-15 + u32 vp:1; // bit 10(VLAN Packet) + u32 jp:1; // bit 9(Jumbo Packet) + u32 ft:1; // bit 8(Frame Truncated) + u32 drop:1; // bit 7(Drop packet) + u32 rxmac_error:1; // bit 6(RXMAC Error Indicator) + u32 wol:1; // bit 5(WOL Event) + u32 tcpp:1; // bit 4(TCP checksum pass) + u32 tcpa:1; // bit 3(TCP checksum assist) + u32 ipp:1; // bit 2(IP checksum pass) + u32 ipa:1; // bit 1(IP checksum assist) + u32 hp:1; // bit 0(hash pass) +#else + u32 hp:1; // bit 0(hash pass) + u32 ipa:1; // bit 1(IP checksum assist) + u32 ipp:1; // bit 2(IP checksum pass) + u32 tcpa:1; // bit 3(TCP checksum assist) + u32 tcpp:1; // bit 4(TCP checksum pass) + u32 wol:1; // bit 5(WOL Event) + u32 rxmac_error:1; // bit 6(RXMAC Error Indicator) + u32 drop:1; // bit 7(Drop packet) + u32 ft:1; // bit 8(Frame Truncated) + u32 jp:1; // bit 9(Jumbo Packet) + u32 vp:1; // bit 10(VLAN Packet) + u32 unused:5; // bits 11-15 + u32 asw_prev_pkt_dropped:1;// bit 16(e.g. IFG too small on previous) + u32 asw_RX_DV_event:1; // bit 17(short receive event detected) + u32 asw_false_carrier_event:1; // bit 18(bad carrier since last good packet) + u32 asw_code_err:1; // bit 19(one or more nibbles signalled as errors) + u32 asw_CRC_err:1; // bit 20(CRC error) + u32 asw_len_chk_err:1; // bit 21(frame length field incorrect) + u32 asw_too_long:1; // bit 22(frame length > 1518 bytes) + u32 asw_OK:1; // bit 23(valid CRC + no code error) + u32 asw_multicast:1; // bit 24(has a multicast address) + u32 asw_broadcast:1; // bit 25(has a broadcast address) + u32 asw_dribble_nibble:1; // bit 26(spurious bits after EOP) + u32 asw_control_frame:1; // bit 27(is a control frame) + u32 asw_pause_frame:1; // bit 28(is a pause frame) + u32 asw_unsupported_op:1; // bit 29(unsupported OP code) + u32 asw_VLAN_tag:1; // bit 30(VLAN tag detected) + u32 asw_long_evt:1; // bit 31(Rx long event) +#if 0 + u32 asw_trunc:1; // bit 31(Rx frame truncated) +#endif +#endif + } bits; +} PKT_STAT_DESC_WORD0_t, *PPKT_STAT_WORD0_t; + +typedef union _PKT_STAT_DESC_WORD1_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:4; // bits 28-31 + u32 ri:2; // bits 26-27(Ring Index) + u32 bi:10; // bits 16-25(Buffer Index) + u32 length:16; // bit 0-15(length in bytes) +#else + u32 length:16; // bit 0-15(length in bytes) + u32 bi:10; // bits 16-25(Buffer Index) + u32 ri:2; // bits 26-27(Ring Index) + u32 unused:4; // bits 28-31 +#endif + } bits; +} PKT_STAT_DESC_WORD1_t, *PPKT_STAT_WORD1_t; + +typedef struct _PKT_STAT_DESC_t { + PKT_STAT_DESC_WORD0_t word0; + PKT_STAT_DESC_WORD1_t word1; +} PKT_STAT_DESC_t, *PPKT_STAT_DESC_t; + +/* Typedefs for the RX DMA status word */ + +/* + * RXSTAT_WORD0_t structure holds part of the status bits of the Rx DMA engine + * that get copied out to memory by the ET-1310. Word 0 is a 32 bit word + * whichcontains Free Buffer ring 0 and 1 available offset. + */ +typedef union _rxstat_word0_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 FBR1unused:5; // bits 27-31 + u32 FBR1wrap:1; // bit 26 + u32 FBR1offset:10; // bits 16-25 + u32 FBR0unused:5; // bits 11-15 + u32 FBR0wrap:1; // bit 10 + u32 FBR0offset:10; // bits 0-9 +#else + u32 FBR0offset:10; // bits 0-9 + u32 FBR0wrap:1; // bit 10 + u32 FBR0unused:5; // bits 11-15 + u32 FBR1offset:10; // bits 16-25 + u32 FBR1wrap:1; // bit 26 + u32 FBR1unused:5; // bits 27-31 +#endif + } bits; +} RXSTAT_WORD0_t, *PRXSTAT_WORD0_t; + +/* + * RXSTAT_WORD1_t structure holds part of the status bits of the Rx DMA engine + * that get copied out to memory by the ET-1310. Word 3 is a 32 bit word + * which contains the Packet Status Ring available offset. + */ +typedef union _rxstat_word1_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 PSRunused:3; // bits 29-31 + u32 PSRwrap:1; // bit 28 + u32 PSRoffset:12; // bits 16-27 + u32 reserved:16; // bits 0-15 +#else + u32 reserved:16; // bits 0-15 + u32 PSRoffset:12; // bits 16-27 + u32 PSRwrap:1; // bit 28 + u32 PSRunused:3; // bits 29-31 +#endif + } bits; +} RXSTAT_WORD1_t, *PRXSTAT_WORD1_t; + +/* + * RX_STATUS_BLOCK_t is sructure representing the status of the Rx DMA engine + * it sits in free memory, and is pointed to by 0x101c / 0x1020 + */ +typedef struct _rx_status_block_t { + RXSTAT_WORD0_t Word0; + RXSTAT_WORD1_t Word1; +} RX_STATUS_BLOCK_t, *PRX_STATUS_BLOCK_t; + +/* + * Structure for look-up table holding free buffer ring pointers + */ +typedef struct _FbrLookupTable { + void *Va[MAX_DESC_PER_RING_RX]; + void *Buffer1[MAX_DESC_PER_RING_RX]; + void *Buffer2[MAX_DESC_PER_RING_RX]; + u32 PAHigh[MAX_DESC_PER_RING_RX]; + u32 PALow[MAX_DESC_PER_RING_RX]; +} FBRLOOKUPTABLE, *PFBRLOOKUPTABLE; + +typedef enum { + ONE_PACKET_INTERRUPT, + FOUR_PACKET_INTERRUPT +} eRX_INTERRUPT_STATE_t, *PeRX_INTERRUPT_STATE_t; + +/* + * Structure to hold the skb's in a list + */ +typedef struct rx_skb_list_elem { + struct list_head skb_list_elem; + dma_addr_t dma_addr; + struct sk_buff *skb; +} RX_SKB_LIST_ELEM, *PRX_SKB_LIST_ELEM; + +/* + * RX_RING_t is sructure representing the adaptor's local reference(s) to the + * rings + */ +typedef struct _rx_ring_t { +#ifdef USE_FBR0 + void *pFbr0RingVa; + dma_addr_t pFbr0RingPa; + void *Fbr0MemVa[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; + dma_addr_t Fbr0MemPa[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; + uint64_t Fbr0Realpa; + uint64_t Fbr0offset; + DMA10W_t local_Fbr0_full; + u32 Fbr0NumEntries; + u32 Fbr0BufferSize; +#endif + void *pFbr1RingVa; + dma_addr_t pFbr1RingPa; + void *Fbr1MemVa[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; + dma_addr_t Fbr1MemPa[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; + uint64_t Fbr1Realpa; + uint64_t Fbr1offset; + FBRLOOKUPTABLE *Fbr[2]; + DMA10W_t local_Fbr1_full; + u32 Fbr1NumEntries; + u32 Fbr1BufferSize; + + void *pPSRingVa; + dma_addr_t pPSRingPa; + uint64_t pPSRingRealPa; + uint64_t pPSRingOffset; + RXDMA_PSR_FULL_OFFSET_t local_psr_full; + u32 PsrNumEntries; + + void *pRxStatusVa; + dma_addr_t pRxStatusPa; + uint64_t RxStatusRealPA; + uint64_t RxStatusOffset; + + struct list_head RecvBufferPool; + + /* RECV */ + struct list_head RecvList; + struct list_head RecvPendingList; + u32 nReadyRecv; + + u32 NumRfd; + + bool UnfinishedReceives; + + struct list_head RecvPacketPool; + + /* lookaside lists */ + struct kmem_cache *RecvLookaside; +} RX_RING_t, *PRX_RING_t; + +/* Forward reference of RFD */ +struct _MP_RFD; + +/* Forward declaration of the private adapter structure */ +struct et131x_adapter; + +/* PROTOTYPES for Initialization */ +int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter); +void et131x_rx_dma_memory_free(struct et131x_adapter *adapter); +int et131x_rfd_resources_alloc(struct et131x_adapter *adapter, + struct _MP_RFD *pMpRfd); +void et131x_rfd_resources_free(struct et131x_adapter *adapter, + struct _MP_RFD *pMpRfd); +int et131x_init_recv(struct et131x_adapter *adapter); + +void ConfigRxDmaRegs(struct et131x_adapter *adapter); +void SetRxDmaTimer(struct et131x_adapter *adapter); +void et131x_rx_dma_disable(struct et131x_adapter *adapter); +void et131x_rx_dma_enable(struct et131x_adapter *adapter); + +void et131x_reset_recv(struct et131x_adapter *adapter); + +void et131x_handle_recv_interrupt(struct et131x_adapter *adapter); + +#endif /* __ET1310_RX_H__ */ diff --git a/drivers/staging/et131x/et1310_tx.c b/drivers/staging/et131x/et1310_tx.c new file mode 100644 index 000000000000..a95c2608a0c0 --- /dev/null +++ b/drivers/staging/et131x/et1310_tx.c @@ -0,0 +1,1525 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_tx.c - Routines used to perform data transmission. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#include "et131x_version.h" +#include "et131x_debug.h" +#include "et131x_defs.h" + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/bitops.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> + +#include "et1310_phy.h" +#include "et1310_pm.h" +#include "et1310_jagcore.h" + +#include "et131x_adapter.h" +#include "et131x_initpci.h" +#include "et131x_isr.h" + +#include "et1310_tx.h" + +/* Data for debugging facilities */ +#ifdef CONFIG_ET131X_DEBUG +extern dbg_info_t *et131x_dbginfo; +#endif /* CONFIG_ET131X_DEBUG */ + +static void et131x_update_tcb_list(struct et131x_adapter *pAdapter); +static void et131x_check_send_wait_list(struct et131x_adapter *pAdapter); +static inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, + PMP_TCB pMpTcb); +static int et131x_send_packet(struct sk_buff *skb, + struct et131x_adapter *pAdapter); +static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb); + +/** + * et131x_tx_dma_memory_alloc + * @adapter: pointer to our private adapter structure + * + * Returns 0 on success and errno on failure (as defined in errno.h). + * + * Allocates memory that will be visible both to the device and to the CPU. + * The OS will pass us packets, pointers to which we will insert in the Tx + * Descriptor queue. The device will read this queue to find the packets in + * memory. The device will update the "status" in memory each time it xmits a + * packet. + */ +int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) +{ + int desc_size = 0; + TX_RING_t *tx_ring = &adapter->TxRing; + + DBG_ENTER(et131x_dbginfo); + + /* Allocate memory for the TCB's (Transmit Control Block) */ + adapter->TxRing.MpTcbMem = (MP_TCB *) kcalloc(NUM_TCB, sizeof(MP_TCB), + GFP_ATOMIC | GFP_DMA); + if (!adapter->TxRing.MpTcbMem) { + DBG_ERROR(et131x_dbginfo, "Cannot alloc memory for TCBs\n"); + DBG_LEAVE(et131x_dbginfo); + return -ENOMEM; + } + + /* Allocate enough memory for the Tx descriptor ring, and allocate + * some extra so that the ring can be aligned on a 4k boundary. + */ + desc_size = (sizeof(TX_DESC_ENTRY_t) * NUM_DESC_PER_RING_TX) + 4096 - 1; + tx_ring->pTxDescRingVa = + (PTX_DESC_ENTRY_t) pci_alloc_consistent(adapter->pdev, desc_size, + &tx_ring->pTxDescRingPa); + if (!adapter->TxRing.pTxDescRingVa) { + DBG_ERROR(et131x_dbginfo, "Cannot alloc memory for Tx Ring\n"); + DBG_LEAVE(et131x_dbginfo); + return -ENOMEM; + } + + /* Save physical address + * + * NOTE: pci_alloc_consistent(), used above to alloc DMA regions, + * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses + * are ever returned, make sure the high part is retrieved here before + * storing the adjusted address. + */ + tx_ring->pTxDescRingAdjustedPa = tx_ring->pTxDescRingPa; + + /* Align Tx Descriptor Ring on a 4k (0x1000) byte boundary */ + et131x_align_allocated_memory(adapter, + &tx_ring->pTxDescRingAdjustedPa, + &tx_ring->TxDescOffset, 0x0FFF); + + tx_ring->pTxDescRingVa += tx_ring->TxDescOffset; + + /* Allocate memory for the Tx status block */ + tx_ring->pTxStatusVa = pci_alloc_consistent(adapter->pdev, + sizeof(TX_STATUS_BLOCK_t), + &tx_ring->pTxStatusPa); + if (!adapter->TxRing.pTxStatusPa) { + DBG_ERROR(et131x_dbginfo, + "Cannot alloc memory for Tx status block\n"); + DBG_LEAVE(et131x_dbginfo); + return -ENOMEM; + } + + /* Allocate memory for a dummy buffer */ + tx_ring->pTxDummyBlkVa = pci_alloc_consistent(adapter->pdev, + NIC_MIN_PACKET_SIZE, + &tx_ring->pTxDummyBlkPa); + if (!adapter->TxRing.pTxDummyBlkPa) { + DBG_ERROR(et131x_dbginfo, + "Cannot alloc memory for Tx dummy buffer\n"); + DBG_LEAVE(et131x_dbginfo); + return -ENOMEM; + } + + DBG_LEAVE(et131x_dbginfo); + return 0; +} + +/** + * et131x_tx_dma_memory_free - Free all memory allocated within this module + * @adapter: pointer to our private adapter structure + * + * Returns 0 on success and errno on failure (as defined in errno.h). + */ +void et131x_tx_dma_memory_free(struct et131x_adapter *adapter) +{ + int desc_size = 0; + + DBG_ENTER(et131x_dbginfo); + + if (adapter->TxRing.pTxDescRingVa) { + /* Free memory relating to Tx rings here */ + adapter->TxRing.pTxDescRingVa -= adapter->TxRing.TxDescOffset; + + desc_size = + (sizeof(TX_DESC_ENTRY_t) * NUM_DESC_PER_RING_TX) + 4096 - 1; + + pci_free_consistent(adapter->pdev, + desc_size, + adapter->TxRing.pTxDescRingVa, + adapter->TxRing.pTxDescRingPa); + + adapter->TxRing.pTxDescRingVa = NULL; + } + + /* Free memory for the Tx status block */ + if (adapter->TxRing.pTxStatusVa) { + pci_free_consistent(adapter->pdev, + sizeof(TX_STATUS_BLOCK_t), + adapter->TxRing.pTxStatusVa, + adapter->TxRing.pTxStatusPa); + + adapter->TxRing.pTxStatusVa = NULL; + } + + /* Free memory for the dummy buffer */ + if (adapter->TxRing.pTxDummyBlkVa) { + pci_free_consistent(adapter->pdev, + NIC_MIN_PACKET_SIZE, + adapter->TxRing.pTxDummyBlkVa, + adapter->TxRing.pTxDummyBlkPa); + + adapter->TxRing.pTxDummyBlkVa = NULL; + } + + /* Free the memory for MP_TCB structures */ + if (adapter->TxRing.MpTcbMem) { + kfree(adapter->TxRing.MpTcbMem); + adapter->TxRing.MpTcbMem = NULL; + } + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * ConfigTxDmaRegs - Set up the tx dma section of the JAGCore. + * @adapter: pointer to our private adapter structure + */ +void ConfigTxDmaRegs(struct et131x_adapter *pAdapter) +{ + struct _TXDMA_t __iomem *pTxDma = &pAdapter->CSRAddress->txdma; + + DBG_ENTER(et131x_dbginfo); + + /* Load the hardware with the start of the transmit descriptor ring. */ + writel((uint32_t) (pAdapter->TxRing.pTxDescRingAdjustedPa >> 32), + &pTxDma->pr_base_hi); + writel((uint32_t) pAdapter->TxRing.pTxDescRingAdjustedPa, + &pTxDma->pr_base_lo); + + /* Initialise the transmit DMA engine */ + writel(NUM_DESC_PER_RING_TX - 1, &pTxDma->pr_num_des.value); + + /* Load the completion writeback physical address + * + * NOTE: pci_alloc_consistent(), used above to alloc DMA regions, + * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses + * are ever returned, make sure the high part is retrieved here before + * storing the adjusted address. + */ + writel(0, &pTxDma->dma_wb_base_hi); + writel(pAdapter->TxRing.pTxStatusPa, &pTxDma->dma_wb_base_lo); + + memset(pAdapter->TxRing.pTxStatusVa, 0, sizeof(TX_STATUS_BLOCK_t)); + + writel(0, &pTxDma->service_request.value); + pAdapter->TxRing.txDmaReadyToSend.value = 0; + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310 + * @pAdapter: pointer to our adapter structure + */ +void et131x_tx_dma_disable(struct et131x_adapter *pAdapter) +{ + DBG_ENTER(et131x_dbginfo); + + /* Setup the tramsmit dma configuration register */ + writel(0x101, &pAdapter->CSRAddress->txdma.csr.value); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_tx_dma_enable - re-start of Tx_DMA on the ET1310. + * @pAdapter: pointer to our adapter structure + * + * Mainly used after a return to the D0 (full-power) state from a lower state. + */ +void et131x_tx_dma_enable(struct et131x_adapter *pAdapter) +{ + DBG_ENTER(et131x_dbginfo); + + if (pAdapter->RegistryPhyLoopbk) { + /* TxDMA is disabled for loopback operation. */ + writel(0x101, &pAdapter->CSRAddress->txdma.csr.value); + } else { + TXDMA_CSR_t csr = { 0 }; + + /* Setup the transmit dma configuration register for normal + * operation + */ + csr.bits.sngl_epkt_mode = 1; + csr.bits.halt = 0; + csr.bits.cache_thrshld = pAdapter->RegistryDMACache; + writel(csr.value, &pAdapter->CSRAddress->txdma.csr.value); + } + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_init_send - Initialize send data structures + * @adapter: pointer to our private adapter structure + */ +void et131x_init_send(struct et131x_adapter *adapter) +{ + PMP_TCB pMpTcb; + uint32_t TcbCount; + TX_RING_t *tx_ring; + + DBG_ENTER(et131x_dbginfo); + + /* Setup some convenience pointers */ + tx_ring = &adapter->TxRing; + pMpTcb = adapter->TxRing.MpTcbMem; + + tx_ring->TCBReadyQueueHead = pMpTcb; + + /* Go through and set up each TCB */ + for (TcbCount = 0; TcbCount < NUM_TCB; TcbCount++) { + memset(pMpTcb, 0, sizeof(MP_TCB)); + + /* Set the link pointer in HW TCB to the next TCB in the + * chain. If this is the last TCB in the chain, also set the + * tail pointer. + */ + if (TcbCount < NUM_TCB - 1) { + pMpTcb->Next = pMpTcb + 1; + } else { + tx_ring->TCBReadyQueueTail = pMpTcb; + pMpTcb->Next = (PMP_TCB) NULL; + } + + pMpTcb++; + } + + /* Curr send queue should now be empty */ + tx_ring->CurrSendHead = (PMP_TCB) NULL; + tx_ring->CurrSendTail = (PMP_TCB) NULL; + + INIT_LIST_HEAD(&adapter->TxRing.SendWaitQueue); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_send_packets - This function is called by the OS to send packets + * @skb: the packet(s) to send + * @netdev:device on which to TX the above packet(s) + * + * Return 0 in almost all cases; non-zero value in extreme hard failure only + */ +int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) +{ + int status = 0; + struct et131x_adapter *pAdapter = NULL; + + DBG_TX_ENTER(et131x_dbginfo); + + pAdapter = netdev_priv(netdev); + + /* Send these packets + * + * NOTE: The Linux Tx entry point is only given one packet at a time + * to Tx, so the PacketCount and it's array used makes no sense here + */ + + /* Queue is not empty or TCB is not available */ + if (!list_empty(&pAdapter->TxRing.SendWaitQueue) || + MP_TCB_RESOURCES_NOT_AVAILABLE(pAdapter)) { + /* NOTE: If there's an error on send, no need to queue the + * packet under Linux; if we just send an error up to the + * netif layer, it will resend the skb to us. + */ + DBG_VERBOSE(et131x_dbginfo, "TCB Resources Not Available\n"); + status = -ENOMEM; + } else { + /* We need to see if the link is up; if it's not, make the + * netif layer think we're good and drop the packet + */ + //if( MP_SHOULD_FAIL_SEND( pAdapter ) || pAdapter->DriverNoPhyAccess ) + if (MP_SHOULD_FAIL_SEND(pAdapter) || pAdapter->DriverNoPhyAccess + || !netif_carrier_ok(netdev)) { + DBG_VERBOSE(et131x_dbginfo, + "Can't Tx, Link is DOWN; drop the packet\n"); + + dev_kfree_skb_any(skb); + skb = NULL; + + pAdapter->net_stats.tx_dropped++; + } else { + status = et131x_send_packet(skb, pAdapter); + + if (status == -ENOMEM) { + + /* NOTE: If there's an error on send, no need + * to queue the packet under Linux; if we just + * send an error up to the netif layer, it + * will resend the skb to us. + */ + DBG_WARNING(et131x_dbginfo, + "Resources problem, Queue tx packet\n"); + } else if (status != 0) { + /* On any other error, make netif think we're + * OK and drop the packet + */ + DBG_WARNING(et131x_dbginfo, + "General error, drop packet\n"); + + dev_kfree_skb_any(skb); + skb = NULL; + + pAdapter->net_stats.tx_dropped++; + } + } + } + + DBG_TX_LEAVE(et131x_dbginfo); + return status; +} + +/** + * et131x_send_packet - Do the work to send a packet + * @skb: the packet(s) to send + * @pAdapter: a pointer to the device's private adapter structure + * + * Return 0 in almost all cases; non-zero value in extreme hard failure only. + * + * Assumption: Send spinlock has been acquired + */ +static int et131x_send_packet(struct sk_buff *skb, + struct et131x_adapter *pAdapter) +{ + int status = 0; + PMP_TCB pMpTcb = NULL; + uint16_t *pShBufVa; + unsigned long lockflags; + + DBG_TX_ENTER(et131x_dbginfo); + + /* Is our buffer scattered, or continuous? */ + if (skb_shinfo(skb)->nr_frags == 0) { + DBG_TX(et131x_dbginfo, "Scattered buffer: NO\n"); + } else { + DBG_TX(et131x_dbginfo, "Scattered buffer: YES, Num Frags: %d\n", + skb_shinfo(skb)->nr_frags); + } + + /* All packets must have at least a MAC address and a protocol type */ + if (skb->len < ETH_HLEN) { + DBG_ERROR(et131x_dbginfo, + "Packet size < ETH_HLEN (14 bytes)\n"); + DBG_LEAVE(et131x_dbginfo); + return -EIO; + } + + /* Get a TCB for this packet */ + spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags); + + pMpTcb = pAdapter->TxRing.TCBReadyQueueHead; + + if (pMpTcb == NULL) { + spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags); + + DBG_WARNING(et131x_dbginfo, "Can't obtain a TCB\n"); + DBG_TX_LEAVE(et131x_dbginfo); + return -ENOMEM; + } + + pAdapter->TxRing.TCBReadyQueueHead = pMpTcb->Next; + + if (pAdapter->TxRing.TCBReadyQueueHead == NULL) { + pAdapter->TxRing.TCBReadyQueueTail = NULL; + } + + spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags); + + pMpTcb->PacketLength = skb->len; + pMpTcb->Packet = skb; + + if ((skb->data != NULL) && ((skb->len - skb->data_len) >= 6)) { + pShBufVa = (uint16_t *) skb->data; + + if ((pShBufVa[0] == 0xffff) && + (pShBufVa[1] == 0xffff) && (pShBufVa[2] == 0xffff)) { + MP_SET_FLAG(pMpTcb, fMP_DEST_BROAD); + } else if ((pShBufVa[0] & 0x3) == 0x0001) { + MP_SET_FLAG(pMpTcb, fMP_DEST_MULTI); + } + } + + pMpTcb->Next = NULL; + + /* Call the NIC specific send handler. */ + if (status == 0) { + status = nic_send_packet(pAdapter, pMpTcb); + } + + if (status != 0) { + spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags); + + if (pAdapter->TxRing.TCBReadyQueueTail) { + pAdapter->TxRing.TCBReadyQueueTail->Next = pMpTcb; + } else { + /* Apparently ready Q is empty. */ + pAdapter->TxRing.TCBReadyQueueHead = pMpTcb; + } + + pAdapter->TxRing.TCBReadyQueueTail = pMpTcb; + + spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags); + + DBG_TX_LEAVE(et131x_dbginfo); + return status; + } + + DBG_ASSERT(pAdapter->TxRing.nBusySend <= NUM_TCB); + + DBG_TX_LEAVE(et131x_dbginfo); + return 0; +} + +/** + * nic_send_packet - NIC specific send handler for version B silicon. + * @pAdapter: pointer to our adapter + * @pMpTcb: pointer to MP_TCB + * + * Returns 0 or errno. + */ +static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) +{ + uint32_t loopIndex; + TX_DESC_ENTRY_t CurDesc[24]; + uint32_t FragmentNumber = 0; + uint32_t iThisCopy, iRemainder; + struct sk_buff *pPacket = pMpTcb->Packet; + uint32_t FragListCount = skb_shinfo(pPacket)->nr_frags + 1; + struct skb_frag_struct *pFragList = &skb_shinfo(pPacket)->frags[0]; + unsigned long lockflags1, lockflags2; + + DBG_TX_ENTER(et131x_dbginfo); + + /* Part of the optimizations of this send routine restrict us to + * sending 24 fragments at a pass. In practice we should never see + * more than 5 fragments. + * + * NOTE: The older version of this function (below) can handle any + * number of fragments. If needed, we can call this function, + * although it is less efficient. + */ + if (FragListCount > 23) { + DBG_TX_LEAVE(et131x_dbginfo); + return -EIO; + } + + memset(CurDesc, 0, sizeof(TX_DESC_ENTRY_t) * (FragListCount + 1)); + + for (loopIndex = 0; loopIndex < FragListCount; loopIndex++) { + /* If there is something in this element, lets get a + * descriptor from the ring and get the necessary data + */ + if (loopIndex == 0) { + /* If the fragments are smaller than a standard MTU, + * then map them to a single descriptor in the Tx + * Desc ring. However, if they're larger, as is + * possible with support for jumbo packets, then + * split them each across 2 descriptors. + * + * This will work until we determine why the hardware + * doesn't seem to like large fragments. + */ + if ((pPacket->len - pPacket->data_len) <= 1514) { + DBG_TX(et131x_dbginfo, + "Got packet of length %d, " + "filling desc entry %d, " + "TCB: 0x%p\n", + (pPacket->len - pPacket->data_len), + pAdapter->TxRing.txDmaReadyToSend.bits. + val, pMpTcb); + + CurDesc[FragmentNumber].DataBufferPtrHigh = 0; + + CurDesc[FragmentNumber].word2.bits. + length_in_bytes = + pPacket->len - pPacket->data_len; + + /* NOTE: Here, the dma_addr_t returned from + * pci_map_single() is implicitly cast as a + * uint32_t. Although dma_addr_t can be + * 64-bit, the address returned by + * pci_map_single() is always 32-bit + * addressable (as defined by the pci/dma + * subsystem) + */ + CurDesc[FragmentNumber++].DataBufferPtrLow = + pci_map_single(pAdapter->pdev, + pPacket->data, + pPacket->len - + pPacket->data_len, + PCI_DMA_TODEVICE); + } else { + DBG_TX(et131x_dbginfo, + "Got packet of length %d, " + "filling desc entry %d, " + "TCB: 0x%p\n", + (pPacket->len - pPacket->data_len), + pAdapter->TxRing.txDmaReadyToSend.bits. + val, pMpTcb); + + CurDesc[FragmentNumber].DataBufferPtrHigh = 0; + + CurDesc[FragmentNumber].word2.bits. + length_in_bytes = + ((pPacket->len - pPacket->data_len) / 2); + + /* NOTE: Here, the dma_addr_t returned from + * pci_map_single() is implicitly cast as a + * uint32_t. Although dma_addr_t can be + * 64-bit, the address returned by + * pci_map_single() is always 32-bit + * addressable (as defined by the pci/dma + * subsystem) + */ + CurDesc[FragmentNumber++].DataBufferPtrLow = + pci_map_single(pAdapter->pdev, + pPacket->data, + ((pPacket->len - + pPacket->data_len) / 2), + PCI_DMA_TODEVICE); + CurDesc[FragmentNumber].DataBufferPtrHigh = 0; + + CurDesc[FragmentNumber].word2.bits. + length_in_bytes = + ((pPacket->len - pPacket->data_len) / 2); + + /* NOTE: Here, the dma_addr_t returned from + * pci_map_single() is implicitly cast as a + * uint32_t. Although dma_addr_t can be + * 64-bit, the address returned by + * pci_map_single() is always 32-bit + * addressable (as defined by the pci/dma + * subsystem) + */ + CurDesc[FragmentNumber++].DataBufferPtrLow = + pci_map_single(pAdapter->pdev, + pPacket->data + + ((pPacket->len - + pPacket->data_len) / 2), + ((pPacket->len - + pPacket->data_len) / 2), + PCI_DMA_TODEVICE); + } + } else { + DBG_TX(et131x_dbginfo, + "Got packet of length %d," + "filling desc entry %d\n" + "TCB: 0x%p\n", + pFragList[loopIndex].size, + pAdapter->TxRing.txDmaReadyToSend.bits.val, + pMpTcb); + + CurDesc[FragmentNumber].DataBufferPtrHigh = 0; + + CurDesc[FragmentNumber].word2.bits.length_in_bytes = + pFragList[loopIndex - 1].size; + + /* NOTE: Here, the dma_addr_t returned from + * pci_map_page() is implicitly cast as a uint32_t. + * Although dma_addr_t can be 64-bit, the address + * returned by pci_map_page() is always 32-bit + * addressable (as defined by the pci/dma subsystem) + */ + CurDesc[FragmentNumber++].DataBufferPtrLow = + pci_map_page(pAdapter->pdev, + pFragList[loopIndex - 1].page, + pFragList[loopIndex - 1].page_offset, + pFragList[loopIndex - 1].size, + PCI_DMA_TODEVICE); + } + } + + if (FragmentNumber == 0) { + DBG_WARNING(et131x_dbginfo, "No. frags is 0\n"); + return -EIO; + } + + if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { + if (++pAdapter->TxRing.TxPacketsSinceLastinterrupt == + pAdapter->RegistryTxNumBuffers) { + CurDesc[FragmentNumber - 1].word3.value = 0x5; + pAdapter->TxRing.TxPacketsSinceLastinterrupt = 0; + } else { + CurDesc[FragmentNumber - 1].word3.value = 0x1; + } + } else { + CurDesc[FragmentNumber - 1].word3.value = 0x5; + } + + CurDesc[0].word3.bits.f = 1; + + pMpTcb->WrIndexStart = pAdapter->TxRing.txDmaReadyToSend; + pMpTcb->PacketStaleCount = 0; + + spin_lock_irqsave(&pAdapter->SendHWLock, lockflags1); + + iThisCopy = + NUM_DESC_PER_RING_TX - pAdapter->TxRing.txDmaReadyToSend.bits.val; + + if (iThisCopy >= FragmentNumber) { + iRemainder = 0; + iThisCopy = FragmentNumber; + } else { + iRemainder = FragmentNumber - iThisCopy; + } + + memcpy(pAdapter->TxRing.pTxDescRingVa + + pAdapter->TxRing.txDmaReadyToSend.bits.val, CurDesc, + sizeof(TX_DESC_ENTRY_t) * iThisCopy); + + pAdapter->TxRing.txDmaReadyToSend.bits.val += iThisCopy; + + if ((pAdapter->TxRing.txDmaReadyToSend.bits.val == 0) || + (pAdapter->TxRing.txDmaReadyToSend.bits.val == + NUM_DESC_PER_RING_TX)) { + if (pAdapter->TxRing.txDmaReadyToSend.bits.wrap) { + pAdapter->TxRing.txDmaReadyToSend.value = 0; + } else { + pAdapter->TxRing.txDmaReadyToSend.value = 0x400; + } + } + + if (iRemainder) { + memcpy(pAdapter->TxRing.pTxDescRingVa, + CurDesc + iThisCopy, + sizeof(TX_DESC_ENTRY_t) * iRemainder); + + pAdapter->TxRing.txDmaReadyToSend.bits.val += iRemainder; + } + + if (pAdapter->TxRing.txDmaReadyToSend.bits.val == 0) { + if (pAdapter->TxRing.txDmaReadyToSend.value) { + pMpTcb->WrIndex.value = NUM_DESC_PER_RING_TX - 1; + } else { + pMpTcb->WrIndex.value = + 0x400 | (NUM_DESC_PER_RING_TX - 1); + } + } else { + pMpTcb->WrIndex.value = + pAdapter->TxRing.txDmaReadyToSend.value - 1; + } + + spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags2); + + if (pAdapter->TxRing.CurrSendTail) { + pAdapter->TxRing.CurrSendTail->Next = pMpTcb; + } else { + pAdapter->TxRing.CurrSendHead = pMpTcb; + } + + pAdapter->TxRing.CurrSendTail = pMpTcb; + + DBG_ASSERT(pMpTcb->Next == NULL); + + pAdapter->TxRing.nBusySend++; + + spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags2); + + /* Write the new write pointer back to the device. */ + writel(pAdapter->TxRing.txDmaReadyToSend.value, + &pAdapter->CSRAddress->txdma.service_request.value); + + /* For Gig only, we use Tx Interrupt coalescing. Enable the software + * timer to wake us up if this packet isn't followed by N more. + */ + if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { + writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO, + &pAdapter->CSRAddress->global.watchdog_timer); + } + + spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1); + + DBG_TX_LEAVE(et131x_dbginfo); + return 0; +} + +/* + * NOTE: For now, keep this older version of NICSendPacket around for + * reference, even though it's not used + */ +#if 0 + +/** + * NICSendPacket - NIC specific send handler. + * @pAdapter: pointer to our adapter + * @pMpTcb: pointer to MP_TCB + * + * Returns 0 on succes, errno on failure. + * + * This version of the send routine is designed for version A silicon. + * Assumption - Send spinlock has been acquired. + */ +static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) +{ + uint32_t loopIndex, fragIndex, loopEnd; + uint32_t iSplitFirstElement = 0; + uint32_t SegmentSize = 0; + TX_DESC_ENTRY_t CurDesc; + TX_DESC_ENTRY_t *CurDescPostCopy = NULL; + uint32_t SlotsAvailable; + DMA10W_t ServiceComplete; + unsigned int lockflags1, lockflags2; + struct sk_buff *pPacket = pMpTcb->Packet; + uint32_t FragListCount = skb_shinfo(pPacket)->nr_frags + 1; + struct skb_frag_struct *pFragList = &skb_shinfo(pPacket)->frags[0]; + + DBG_TX_ENTER(et131x_dbginfo); + + ServiceComplete.value = + readl(&pAdapter->CSRAddress->txdma.NewServiceComplete.value); + + /* + * Attempt to fix TWO hardware bugs: + * 1) NEVER write an odd number of descriptors. + * 2) If packet length is less than NIC_MIN_PACKET_SIZE, then pad the + * packet to NIC_MIN_PACKET_SIZE bytes by adding a new last + * descriptor IN HALF DUPLEX MODE ONLY + * NOTE that (2) interacts with (1). If the packet is less than + * NIC_MIN_PACKET_SIZE bytes then we will append a descriptor. + * Therefore if it is even now, it will eventually end up odd, and + * so will need adjusting. + * + * VLAN tags get involved since VLAN tags add another one or two + * segments. + */ + DBG_TX(et131x_dbginfo, + "pMpTcb->PacketLength: %d\n", pMpTcb->PacketLength); + + if ((pAdapter->uiDuplexMode == 0) + && (pMpTcb->PacketLength < NIC_MIN_PACKET_SIZE)) { + DBG_TX(et131x_dbginfo, + "HALF DUPLEX mode AND len < MIN_PKT_SIZE\n"); + if ((FragListCount & 0x1) == 0) { + DBG_TX(et131x_dbginfo, + "Even number of descs, split 1st elem\n"); + iSplitFirstElement = 1; + //SegmentSize = pFragList[0].size / 2; + SegmentSize = (pPacket->len - pPacket->data_len) / 2; + } + } else if (FragListCount & 0x1) { + DBG_TX(et131x_dbginfo, "Odd number of descs, split 1st elem\n"); + + iSplitFirstElement = 1; + //SegmentSize = pFragList[0].size / 2; + SegmentSize = (pPacket->len - pPacket->data_len) / 2; + } + + spin_lock_irqsave(&pAdapter->SendHWLock, lockflags1); + + if (pAdapter->TxRing.txDmaReadyToSend.bits.serv_req_wrap == + ServiceComplete.bits.serv_cpl_wrap) { + /* The ring hasn't wrapped. Slots available should be + * (RING_SIZE) - the difference between the two pointers. + */ + SlotsAvailable = NUM_DESC_PER_RING_TX - + (pAdapter->TxRing.txDmaReadyToSend.bits.serv_req - + ServiceComplete.bits.serv_cpl); + } else { + /* The ring has wrapped. Slots available should be the + * difference between the two pointers. + */ + SlotsAvailable = ServiceComplete.bits.serv_cpl - + pAdapter->TxRing.txDmaReadyToSend.bits.serv_req; + } + + if ((FragListCount + iSplitFirstElement) > SlotsAvailable) { + DBG_WARNING(et131x_dbginfo, + "Not Enough Space in Tx Desc Ring\n"); + spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1); + return -ENOMEM; + } + + loopEnd = (FragListCount) + iSplitFirstElement; + fragIndex = 0; + + DBG_TX(et131x_dbginfo, + "TCB : 0x%p\n" + "Packet (SKB) : 0x%p\t Packet->len: %d\t Packet->data_len: %d\n" + "FragListCount : %d\t iSplitFirstElement: %d\t loopEnd:%d\n", + pMpTcb, + pPacket, pPacket->len, pPacket->data_len, + FragListCount, iSplitFirstElement, loopEnd); + + for (loopIndex = 0; loopIndex < loopEnd; loopIndex++) { + if (loopIndex > iSplitFirstElement) { + fragIndex++; + } + + DBG_TX(et131x_dbginfo, + "In loop, loopIndex: %d\t fragIndex: %d\n", loopIndex, + fragIndex); + + /* If there is something in this element, let's get a + * descriptor from the ring and get the necessary data + */ + DBG_TX(et131x_dbginfo, + "Packet Length %d," + "filling desc entry %d\n", + pPacket->len, + pAdapter->TxRing.txDmaReadyToSend.bits.serv_req); + + // NOTE - Should we do a paranoia check here to make sure the fragment + // actually has a length? It's HIGHLY unlikely the fragment would + // contain no data... + if (1) { + // NOTE - Currently always getting 32-bit addrs, and dma_addr_t is + // only 32-bit, so leave "high" ptr value out for now + CurDesc.DataBufferPtrHigh = 0; + + CurDesc.word2.value = 0; + CurDesc.word3.value = 0; + + if (fragIndex == 0) { + if (iSplitFirstElement) { + DBG_TX(et131x_dbginfo, + "Split first element: YES\n"); + + if (loopIndex == 0) { + DBG_TX(et131x_dbginfo, + "Got fragment of length %d, fragIndex: %d\n", + pPacket->len - + pPacket->data_len, + fragIndex); + DBG_TX(et131x_dbginfo, + "SegmentSize: %d\n", + SegmentSize); + + CurDesc.word2.bits. + length_in_bytes = + SegmentSize; + CurDesc.DataBufferPtrLow = + pci_map_single(pAdapter-> + pdev, + pPacket-> + data, + SegmentSize, + PCI_DMA_TODEVICE); + DBG_TX(et131x_dbginfo, + "pci_map_single() returns: 0x%08x\n", + CurDesc. + DataBufferPtrLow); + } else { + DBG_TX(et131x_dbginfo, + "Got fragment of length %d, fragIndex: %d\n", + pPacket->len - + pPacket->data_len, + fragIndex); + DBG_TX(et131x_dbginfo, + "Leftover Size: %d\n", + (pPacket->len - + pPacket->data_len - + SegmentSize)); + + CurDesc.word2.bits. + length_in_bytes = + ((pPacket->len - + pPacket->data_len) - + SegmentSize); + CurDesc.DataBufferPtrLow = + pci_map_single(pAdapter-> + pdev, + (pPacket-> + data + + SegmentSize), + (pPacket-> + len - + pPacket-> + data_len - + SegmentSize), + PCI_DMA_TODEVICE); + DBG_TX(et131x_dbginfo, + "pci_map_single() returns: 0x%08x\n", + CurDesc. + DataBufferPtrLow); + } + } else { + DBG_TX(et131x_dbginfo, + "Split first element: NO\n"); + + CurDesc.word2.bits.length_in_bytes = + pPacket->len - pPacket->data_len; + + CurDesc.DataBufferPtrLow = + pci_map_single(pAdapter->pdev, + pPacket->data, + (pPacket->len - + pPacket->data_len), + PCI_DMA_TODEVICE); + DBG_TX(et131x_dbginfo, + "pci_map_single() returns: 0x%08x\n", + CurDesc.DataBufferPtrLow); + } + } else { + + CurDesc.word2.bits.length_in_bytes = + pFragList[fragIndex - 1].size; + CurDesc.DataBufferPtrLow = + pci_map_page(pAdapter->pdev, + pFragList[fragIndex - 1].page, + pFragList[fragIndex - + 1].page_offset, + pFragList[fragIndex - 1].size, + PCI_DMA_TODEVICE); + DBG_TX(et131x_dbginfo, + "pci_map_page() returns: 0x%08x\n", + CurDesc.DataBufferPtrLow); + } + + if (loopIndex == 0) { + /* This is the first descriptor of the packet + * + * Set the "f" bit to indicate this is the + * first descriptor in the packet. + */ + DBG_TX(et131x_dbginfo, + "This is our FIRST descriptor\n"); + CurDesc.word3.bits.f = 1; + + pMpTcb->WrIndexStart = + pAdapter->TxRing.txDmaReadyToSend; + } + + if ((loopIndex == (loopEnd - 1)) && + (pAdapter->uiDuplexMode || + (pMpTcb->PacketLength >= NIC_MIN_PACKET_SIZE))) { + /* This is the Last descriptor of the packet */ + DBG_TX(et131x_dbginfo, + "THIS is our LAST descriptor\n"); + + if (pAdapter->uiLinkSpeed == + TRUEPHY_SPEED_1000MBPS) { + if (++pAdapter->TxRing. + TxPacketsSinceLastinterrupt >= + pAdapter->RegistryTxNumBuffers) { + CurDesc.word3.value = 0x5; + pAdapter->TxRing. + TxPacketsSinceLastinterrupt + = 0; + } else { + CurDesc.word3.value = 0x1; + } + } else { + CurDesc.word3.value = 0x5; + } + + /* Following index will be used during freeing + * of packet + */ + pMpTcb->WrIndex = + pAdapter->TxRing.txDmaReadyToSend; + pMpTcb->PacketStaleCount = 0; + } + + /* Copy the descriptor (filled above) into the + * descriptor ring at the next free entry. Advance + * the "next free entry" variable + */ + memcpy(pAdapter->TxRing.pTxDescRingVa + + pAdapter->TxRing.txDmaReadyToSend.bits.serv_req, + &CurDesc, sizeof(TX_DESC_ENTRY_t)); + + CurDescPostCopy = + pAdapter->TxRing.pTxDescRingVa + + pAdapter->TxRing.txDmaReadyToSend.bits.serv_req; + + DBG_TX(et131x_dbginfo, + "CURRENT DESCRIPTOR\n" + "\tAddress : 0x%p\n" + "\tDataBufferPtrHigh : 0x%08x\n" + "\tDataBufferPtrLow : 0x%08x\n" + "\tword2 : 0x%08x\n" + "\tword3 : 0x%08x\n", + CurDescPostCopy, + CurDescPostCopy->DataBufferPtrHigh, + CurDescPostCopy->DataBufferPtrLow, + CurDescPostCopy->word2.value, + CurDescPostCopy->word3.value); + + if (++pAdapter->TxRing.txDmaReadyToSend.bits.serv_req >= + NUM_DESC_PER_RING_TX) { + if (pAdapter->TxRing.txDmaReadyToSend.bits. + serv_req_wrap) { + pAdapter->TxRing.txDmaReadyToSend. + value = 0; + } else { + pAdapter->TxRing.txDmaReadyToSend. + value = 0x400; + } + } + } + } + + if (pAdapter->uiDuplexMode == 0 && + pMpTcb->PacketLength < NIC_MIN_PACKET_SIZE) { + // NOTE - Same 32/64-bit issue as above... + CurDesc.DataBufferPtrHigh = 0x0; + CurDesc.DataBufferPtrLow = pAdapter->TxRing.pTxDummyBlkPa; + CurDesc.word2.value = 0; + + if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { + if (++pAdapter->TxRing.TxPacketsSinceLastinterrupt >= + pAdapter->RegistryTxNumBuffers) { + CurDesc.word3.value = 0x5; + pAdapter->TxRing.TxPacketsSinceLastinterrupt = + 0; + } else { + CurDesc.word3.value = 0x1; + } + } else { + CurDesc.word3.value = 0x5; + } + + CurDesc.word2.bits.length_in_bytes = + NIC_MIN_PACKET_SIZE - pMpTcb->PacketLength; + + pMpTcb->WrIndex = pAdapter->TxRing.txDmaReadyToSend; + + memcpy(pAdapter->TxRing.pTxDescRingVa + + pAdapter->TxRing.txDmaReadyToSend.bits.serv_req, + &CurDesc, sizeof(TX_DESC_ENTRY_t)); + + CurDescPostCopy = + pAdapter->TxRing.pTxDescRingVa + + pAdapter->TxRing.txDmaReadyToSend.bits.serv_req; + + DBG_TX(et131x_dbginfo, + "CURRENT DESCRIPTOR\n" + "\tAddress : 0x%p\n" + "\tDataBufferPtrHigh : 0x%08x\n" + "\tDataBufferPtrLow : 0x%08x\n" + "\tword2 : 0x%08x\n" + "\tword3 : 0x%08x\n", + CurDescPostCopy, + CurDescPostCopy->DataBufferPtrHigh, + CurDescPostCopy->DataBufferPtrLow, + CurDescPostCopy->word2.value, + CurDescPostCopy->word3.value); + + if (++pAdapter->TxRing.txDmaReadyToSend.bits.serv_req >= + NUM_DESC_PER_RING_TX) { + if (pAdapter->TxRing.txDmaReadyToSend.bits. + serv_req_wrap) { + pAdapter->TxRing.txDmaReadyToSend.value = 0; + } else { + pAdapter->TxRing.txDmaReadyToSend.value = 0x400; + } + } + + DBG_TX(et131x_dbginfo, "Padding descriptor %d by %d bytes\n", + //pAdapter->TxRing.txDmaReadyToSend.value, + pAdapter->TxRing.txDmaReadyToSend.bits.serv_req, + NIC_MIN_PACKET_SIZE - pMpTcb->PacketLength); + } + + spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags2); + + if (pAdapter->TxRing.CurrSendTail) { + pAdapter->TxRing.CurrSendTail->Next = pMpTcb; + } else { + pAdapter->TxRing.CurrSendHead = pMpTcb; + } + + pAdapter->TxRing.CurrSendTail = pMpTcb; + + DBG_ASSERT(pMpTcb->Next == NULL); + + pAdapter->TxRing.nBusySend++; + + spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags2); + + /* Write the new write pointer back to the device. */ + writel(pAdapter->TxRing.txDmaReadyToSend.value, + &pAdapter->CSRAddress->txdma.service_request.value); + +#ifdef CONFIG_ET131X_DEBUG + DumpDeviceBlock(DBG_TX_ON, pAdapter, 1); +#endif + + /* For Gig only, we use Tx Interrupt coalescing. Enable the software + * timer to wake us up if this packet isn't followed by N more. + */ + if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { + writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO, + &pAdapter->CSRAddress->global.watchdog_timer); + } + + spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1); + + DBG_TX_LEAVE(et131x_dbginfo); + return 0; +} + +#endif + +/** + * et131x_free_send_packet - Recycle a MP_TCB, complete the packet if necessary + * @pAdapter: pointer to our adapter + * @pMpTcb: pointer to MP_TCB + * + * Assumption - Send spinlock has been acquired + */ +__inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) +{ + unsigned long lockflags; + TX_DESC_ENTRY_t *desc = NULL; + struct net_device_stats *stats = &pAdapter->net_stats; + + if (MP_TEST_FLAG(pMpTcb, fMP_DEST_BROAD)) { + atomic_inc(&pAdapter->Stats.brdcstxmt); + } else if (MP_TEST_FLAG(pMpTcb, fMP_DEST_MULTI)) { + atomic_inc(&pAdapter->Stats.multixmt); + } else { + atomic_inc(&pAdapter->Stats.unixmt); + } + + if (pMpTcb->Packet) { + stats->tx_bytes += pMpTcb->Packet->len; + + /* Iterate through the TX descriptors on the ring + * corresponding to this packet and umap the fragments + * they point to + */ + DBG_TX(et131x_dbginfo, + "Unmap descriptors Here\n" + "TCB : 0x%p\n" + "TCB Next : 0x%p\n" + "TCB PacketLength : %d\n" + "TCB WrIndex.value : 0x%08x\n" + "TCB WrIndex.bits.val : %d\n" + "TCB WrIndex.value : 0x%08x\n" + "TCB WrIndex.bits.val : %d\n", + pMpTcb, + pMpTcb->Next, + pMpTcb->PacketLength, + pMpTcb->WrIndexStart.value, + pMpTcb->WrIndexStart.bits.val, + pMpTcb->WrIndex.value, + pMpTcb->WrIndex.bits.val); + + do { + desc = + (TX_DESC_ENTRY_t *) (pAdapter->TxRing. + pTxDescRingVa + + pMpTcb->WrIndexStart.bits.val); + + DBG_TX(et131x_dbginfo, + "CURRENT DESCRIPTOR\n" + "\tAddress : 0x%p\n" + "\tDataBufferPtrHigh : 0x%08x\n" + "\tDataBufferPtrLow : 0x%08x\n" + "\tword2 : 0x%08x\n" + "\tword3 : 0x%08x\n", + desc, + desc->DataBufferPtrHigh, + desc->DataBufferPtrLow, + desc->word2.value, + desc->word3.value); + + pci_unmap_single(pAdapter->pdev, + desc->DataBufferPtrLow, + desc->word2.value, PCI_DMA_TODEVICE); + + if (++pMpTcb->WrIndexStart.bits.val >= + NUM_DESC_PER_RING_TX) { + if (pMpTcb->WrIndexStart.bits.wrap) { + pMpTcb->WrIndexStart.value = 0; + } else { + pMpTcb->WrIndexStart.value = 0x400; + } + } + } + while (desc != (pAdapter->TxRing.pTxDescRingVa + + pMpTcb->WrIndex.bits.val)); + + DBG_TX(et131x_dbginfo, + "Free Packet (SKB) : 0x%p\n", pMpTcb->Packet); + + dev_kfree_skb_any(pMpTcb->Packet); + } + + memset(pMpTcb, 0, sizeof(MP_TCB)); + + /* Add the TCB to the Ready Q */ + spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags); + + pAdapter->Stats.opackets++; + + if (pAdapter->TxRing.TCBReadyQueueTail) { + pAdapter->TxRing.TCBReadyQueueTail->Next = pMpTcb; + } else { + /* Apparently ready Q is empty. */ + pAdapter->TxRing.TCBReadyQueueHead = pMpTcb; + } + + pAdapter->TxRing.TCBReadyQueueTail = pMpTcb; + + spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags); + + DBG_ASSERT(pAdapter->TxRing.nBusySend >= 0); +} + +/** + * et131x_free_busy_send_packets - Free and complete the stopped active sends + * @pAdapter: pointer to our adapter + * + * Assumption - Send spinlock has been acquired + */ +void et131x_free_busy_send_packets(struct et131x_adapter *pAdapter) +{ + PMP_TCB pMpTcb; + struct list_head *pEntry; + struct sk_buff *pPacket = NULL; + unsigned long lockflags; + uint32_t FreeCounter = 0; + + DBG_ENTER(et131x_dbginfo); + + while (!list_empty(&pAdapter->TxRing.SendWaitQueue)) { + spin_lock_irqsave(&pAdapter->SendWaitLock, lockflags); + + pAdapter->TxRing.nWaitSend--; + spin_unlock_irqrestore(&pAdapter->SendWaitLock, lockflags); + + pEntry = pAdapter->TxRing.SendWaitQueue.next; + + pPacket = NULL; + } + + pAdapter->TxRing.nWaitSend = 0; + + /* Any packets being sent? Check the first TCB on the send list */ + spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + + pMpTcb = pAdapter->TxRing.CurrSendHead; + + while ((pMpTcb != NULL) && (FreeCounter < NUM_TCB)) { + PMP_TCB pNext = pMpTcb->Next; + + pAdapter->TxRing.CurrSendHead = pNext; + + if (pNext == NULL) { + pAdapter->TxRing.CurrSendTail = NULL; + } + + pAdapter->TxRing.nBusySend--; + + spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); + + DBG_VERBOSE(et131x_dbginfo, "pMpTcb = 0x%p\n", pMpTcb); + + FreeCounter++; + MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb); + + spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + + pMpTcb = pAdapter->TxRing.CurrSendHead; + } + + if (FreeCounter == NUM_TCB) { + DBG_ERROR(et131x_dbginfo, + "MpFreeBusySendPackets exitted loop for a bad reason\n"); + BUG(); + } + + spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); + + pAdapter->TxRing.nBusySend = 0; + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_handle_send_interrupt - Interrupt handler for sending processing + * @pAdapter: pointer to our adapter + * + * Re-claim the send resources, complete sends and get more to send from + * the send wait queue. + * + * Assumption - Send spinlock has been acquired + */ +void et131x_handle_send_interrupt(struct et131x_adapter *pAdapter) +{ + DBG_TX_ENTER(et131x_dbginfo); + + /* Mark as completed any packets which have been sent by the device. */ + et131x_update_tcb_list(pAdapter); + + /* If we queued any transmits because we didn't have any TCBs earlier, + * dequeue and send those packets now, as long as we have free TCBs. + */ + et131x_check_send_wait_list(pAdapter); + + DBG_TX_LEAVE(et131x_dbginfo); +} + +/** + * et131x_update_tcb_list - Helper routine for Send Interrupt handler + * @pAdapter: pointer to our adapter + * + * Re-claims the send resources and completes sends. Can also be called as + * part of the NIC send routine when the "ServiceComplete" indication has + * wrapped. + */ +static void et131x_update_tcb_list(struct et131x_adapter *pAdapter) +{ + unsigned long lockflags; + DMA10W_t ServiceComplete; + PMP_TCB pMpTcb; + + ServiceComplete.value = + readl(&pAdapter->CSRAddress->txdma.NewServiceComplete.value); + + /* Has the ring wrapped? Process any descriptors that do not have + * the same "wrap" indicator as the current completion indicator + */ + spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + + pMpTcb = pAdapter->TxRing.CurrSendHead; + while (pMpTcb && + ServiceComplete.bits.wrap != pMpTcb->WrIndex.bits.wrap && + ServiceComplete.bits.val < pMpTcb->WrIndex.bits.val) { + pAdapter->TxRing.nBusySend--; + pAdapter->TxRing.CurrSendHead = pMpTcb->Next; + if (pMpTcb->Next == NULL) { + pAdapter->TxRing.CurrSendTail = NULL; + } + + spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); + MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb); + spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + + /* Goto the next packet */ + pMpTcb = pAdapter->TxRing.CurrSendHead; + } + while (pMpTcb && + ServiceComplete.bits.wrap == pMpTcb->WrIndex.bits.wrap && + ServiceComplete.bits.val > pMpTcb->WrIndex.bits.val) { + pAdapter->TxRing.nBusySend--; + pAdapter->TxRing.CurrSendHead = pMpTcb->Next; + if (pMpTcb->Next == NULL) { + pAdapter->TxRing.CurrSendTail = NULL; + } + + spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); + MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb); + spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + + /* Goto the next packet */ + pMpTcb = pAdapter->TxRing.CurrSendHead; + } + + /* Wake up the queue when we hit a low-water mark */ + if (pAdapter->TxRing.nBusySend <= (NUM_TCB / 3)) { + netif_wake_queue(pAdapter->netdev); + } + + spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); +} + +/** + * et131x_check_send_wait_list - Helper routine for the interrupt handler + * @pAdapter: pointer to our adapter + * + * Takes packets from the send wait queue and posts them to the device (if + * room available). + */ +static void et131x_check_send_wait_list(struct et131x_adapter *pAdapter) +{ + unsigned long lockflags; + + spin_lock_irqsave(&pAdapter->SendWaitLock, lockflags); + + while (!list_empty(&pAdapter->TxRing.SendWaitQueue) && + MP_TCB_RESOURCES_AVAILABLE(pAdapter)) { + struct list_head *pEntry; + + DBG_VERBOSE(et131x_dbginfo, "Tx packets on the wait queue\n"); + + pEntry = pAdapter->TxRing.SendWaitQueue.next; + + pAdapter->TxRing.nWaitSend--; + + DBG_WARNING(et131x_dbginfo, + "MpHandleSendInterrupt - sent a queued pkt. Waiting %d\n", + pAdapter->TxRing.nWaitSend); + } + + spin_unlock_irqrestore(&pAdapter->SendWaitLock, lockflags); +} diff --git a/drivers/staging/et131x/et1310_tx.h b/drivers/staging/et131x/et1310_tx.h new file mode 100644 index 000000000000..2819c7843d21 --- /dev/null +++ b/drivers/staging/et131x/et1310_tx.h @@ -0,0 +1,242 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et1310_tx.h - Defines, structs, enums, prototypes, etc. pertaining to data + * transmission. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef __ET1310_TX_H__ +#define __ET1310_TX_H__ + + +/* Typedefs for Tx Descriptor Ring */ + +/* + * TXDESC_WORD2_t structure holds part of the control bits in the Tx Descriptor + * ring for the ET-1310 + */ +typedef union _txdesc_word2_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 vlan_prio:3; // bits 29-31(VLAN priority) + u32 vlan_cfi:1; // bit 28(cfi) + u32 vlan_tag:12; // bits 16-27(VLAN tag) + u32 length_in_bytes:16; // bits 0-15(packet length) +#else + u32 length_in_bytes:16; // bits 0-15(packet length) + u32 vlan_tag:12; // bits 16-27(VLAN tag) + u32 vlan_cfi:1; // bit 28(cfi) + u32 vlan_prio:3; // bits 29-31(VLAN priority) +#endif /* _BIT_FIELDS_HTOL */ + } bits; +} TXDESC_WORD2_t, *PTXDESC_WORD2_t; + +/* + * TXDESC_WORD3_t structure holds part of the control bits in the Tx Descriptor + * ring for the ET-1310 + */ +typedef union _txdesc_word3_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:17; // bits 15-31 + u32 udpa:1; // bit 14(UDP checksum assist) + u32 tcpa:1; // bit 13(TCP checksum assist) + u32 ipa:1; // bit 12(IP checksum assist) + u32 vlan:1; // bit 11(append VLAN tag) + u32 hp:1; // bit 10(Packet is a Huge packet) + u32 pp:1; // bit 9(pad packet) + u32 mac:1; // bit 8(MAC override) + u32 crc:1; // bit 7(append CRC) + u32 e:1; // bit 6(Tx frame has error) + u32 pf:1; // bit 5(send pause frame) + u32 bp:1; // bit 4(Issue half-duplex backpressure (XON/XOFF) + u32 cw:1; // bit 3(Control word - no packet data) + u32 ir:1; // bit 2(interrupt the processor when this pkt sent) + u32 f:1; // bit 1(first packet in the sequence) + u32 l:1; // bit 0(last packet in the sequence) +#else + u32 l:1; // bit 0(last packet in the sequence) + u32 f:1; // bit 1(first packet in the sequence) + u32 ir:1; // bit 2(interrupt the processor when this pkt sent) + u32 cw:1; // bit 3(Control word - no packet data) + u32 bp:1; // bit 4(Issue half-duplex backpressure (XON/XOFF) + u32 pf:1; // bit 5(send pause frame) + u32 e:1; // bit 6(Tx frame has error) + u32 crc:1; // bit 7(append CRC) + u32 mac:1; // bit 8(MAC override) + u32 pp:1; // bit 9(pad packet) + u32 hp:1; // bit 10(Packet is a Huge packet) + u32 vlan:1; // bit 11(append VLAN tag) + u32 ipa:1; // bit 12(IP checksum assist) + u32 tcpa:1; // bit 13(TCP checksum assist) + u32 udpa:1; // bit 14(UDP checksum assist) + u32 unused:17; // bits 15-31 +#endif /* _BIT_FIELDS_HTOL */ + } bits; +} TXDESC_WORD3_t, *PTXDESC_WORD3_t; + +/* TX_DESC_ENTRY_t is sructure representing each descriptor on the ring */ +typedef struct _tx_desc_entry_t { + u32 DataBufferPtrHigh; + u32 DataBufferPtrLow; + TXDESC_WORD2_t word2; // control words how to xmit the + TXDESC_WORD3_t word3; // data (detailed above) +} TX_DESC_ENTRY_t, *PTX_DESC_ENTRY_t; + + +/* Typedefs for Tx DMA engine status writeback */ + +/* + * TX_STATUS_BLOCK_t is sructure representing the status of the Tx DMA engine + * it sits in free memory, and is pointed to by 0x101c / 0x1020 + */ +typedef union _tx_status_block_t { + u32 value; + struct { +#ifdef _BIT_FIELDS_HTOL + u32 unused:21; // bits 11-31 + u32 serv_cpl_wrap:1; // bit 10 + u32 serv_cpl:10; // bits 0-9 +#else + u32 serv_cpl:10; // bits 0-9 + u32 serv_cpl_wrap:1; // bit 10 + u32 unused:21; // bits 11-31 +#endif + } bits; +} TX_STATUS_BLOCK_t, *PTX_STATUS_BLOCK_t; + +/* TCB (Transmit Control Block) */ +typedef struct _MP_TCB { + struct _MP_TCB *Next; + u32 Flags; + u32 Count; + u32 PacketStaleCount; + struct sk_buff *Packet; + u32 PacketLength; + DMA10W_t WrIndex; + DMA10W_t WrIndexStart; +} MP_TCB, *PMP_TCB; + +/* Structure to hold the skb's in a list */ +typedef struct tx_skb_list_elem { + struct list_head skb_list_elem; + struct sk_buff *skb; +} TX_SKB_LIST_ELEM, *PTX_SKB_LIST_ELEM; + +/* TX_RING_t is sructure representing our local reference(s) to the ring */ +typedef struct _tx_ring_t { + /* TCB (Transmit Control Block) memory and lists */ + PMP_TCB MpTcbMem; + + /* List of TCBs that are ready to be used */ + PMP_TCB TCBReadyQueueHead; + PMP_TCB TCBReadyQueueTail; + + /* list of TCBs that are currently being sent. NOTE that access to all + * three of these (including nBusySend) are controlled via the + * TCBSendQLock. This lock should be secured prior to incementing / + * decrementing nBusySend, or any queue manipulation on CurrSendHead / + * Tail + */ + PMP_TCB CurrSendHead; + PMP_TCB CurrSendTail; + int32_t nBusySend; + + /* List of packets (not TCBs) that were queued for lack of resources */ + struct list_head SendWaitQueue; + int32_t nWaitSend; + + /* The actual descriptor ring */ + PTX_DESC_ENTRY_t pTxDescRingVa; + dma_addr_t pTxDescRingPa; + uint64_t pTxDescRingAdjustedPa; + uint64_t TxDescOffset; + + /* ReadyToSend indicates where we last wrote to in the descriptor ring. */ + DMA10W_t txDmaReadyToSend; + + /* The location of the write-back status block */ + PTX_STATUS_BLOCK_t pTxStatusVa; + dma_addr_t pTxStatusPa; + + /* A Block of zeroes used to pad packets that are less than 60 bytes */ + void *pTxDummyBlkVa; + dma_addr_t pTxDummyBlkPa; + + TXMAC_ERR_t TxMacErr; + + /* Variables to track the Tx interrupt coalescing features */ + int32_t TxPacketsSinceLastinterrupt; +} TX_RING_t, *PTX_RING_t; + +/* Forward declaration of the frag-list for the following prototypes */ +typedef struct _MP_FRAG_LIST MP_FRAG_LIST, *PMP_FRAG_LIST; + +/* Forward declaration of the private adapter structure */ +struct et131x_adapter; + +/* PROTOTYPES for et1310_tx.c */ +int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter); +void et131x_tx_dma_memory_free(struct et131x_adapter *adapter); +void ConfigTxDmaRegs(struct et131x_adapter *pAdapter); +void et131x_init_send(struct et131x_adapter *adapter); +void et131x_tx_dma_disable(struct et131x_adapter *pAdapter); +void et131x_tx_dma_enable(struct et131x_adapter *pAdapter); +void et131x_handle_send_interrupt(struct et131x_adapter *pAdapter); +void et131x_free_busy_send_packets(struct et131x_adapter *pAdapter); +int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev); + +#endif /* __ET1310_TX_H__ */ diff --git a/drivers/staging/et131x/et131x_adapter.h b/drivers/staging/et131x/et131x_adapter.h new file mode 100644 index 000000000000..36e61a47ae27 --- /dev/null +++ b/drivers/staging/et131x/et131x_adapter.h @@ -0,0 +1,347 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_adapter.h - Header which includes the private adapter structure, along + * with related support structures, macros, definitions, etc. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef __ET131X_ADAPTER_H__ +#define __ET131X_ADAPTER_H__ + +#include "et1310_address_map.h" +#include "et1310_tx.h" +#include "et1310_rx.h" + +/* + * Do not change these values: if changed, then change also in respective + * TXdma and Rxdma engines + */ +#define NUM_DESC_PER_RING_TX 512 // TX Do not change these values +#define NUM_TCB 64 + +/* + * These values are all superseded by registry entries to facilitate tuning. + * Once the desired performance has been achieved, the optimal registry values + * should be re-populated to these #defines: + */ +#define NUM_TRAFFIC_CLASSES 1 + +/* + * There are three ways of counting errors - if there are more than X errors + * in Y packets (represented by the "SAMPLE" macros), if there are more than + * N errors in a S mSec time period (the "PERIOD" macros), or if there are + * consecutive packets with errors (CONSEC_ERRORED_THRESH). This last covers + * for "Bursty" errors, and the errored packets may well not be contiguous, + * but several errors where the packet counter has changed by less than a + * small amount will cause this count to increment. + */ +#define TX_PACKETS_IN_SAMPLE 10000 +#define TX_MAX_ERRORS_IN_SAMPLE 50 + +#define TX_ERROR_PERIOD 1000 +#define TX_MAX_ERRORS_IN_PERIOD 10 + +#define LINK_DETECTION_TIMER 5000 + +#define TX_CONSEC_RANGE 5 +#define TX_CONSEC_ERRORED_THRESH 10 + +#define LO_MARK_PERCENT_FOR_PSR 15 +#define LO_MARK_PERCENT_FOR_RX 15 + +/* Macros for flag and ref count operations */ +#define MP_SET_FLAG(_M, _F) ((_M)->Flags |= (_F)) +#define MP_CLEAR_FLAG(_M, _F) ((_M)->Flags &= ~(_F)) +#define MP_CLEAR_FLAGS(_M) ((_M)->Flags = 0) +#define MP_TEST_FLAG(_M, _F) (((_M)->Flags & (_F)) != 0) +#define MP_TEST_FLAGS(_M, _F) (((_M)->Flags & (_F)) == (_F)) +#define MP_IS_FLAG_CLEAR(_M, _F) (((_M)->Flags & (_F)) == 0) + +#define MP_INC_RCV_REF(_A) atomic_inc(&(_A)->RcvRefCount) +#define MP_DEC_RCV_REF(_A) atomic_dec(&(_A)->RcvRefCount) +#define MP_GET_RCV_REF(_A) atomic_read(&(_A)->RcvRefCount) + +/* Macros specific to the private adapter structure */ +#define MP_TCB_RESOURCES_AVAILABLE(_M) ((_M)->TxRing.nBusySend < NUM_TCB) +#define MP_TCB_RESOURCES_NOT_AVAILABLE(_M) ((_M)->TxRing.nBusySend >= NUM_TCB) + +#define MP_SHOULD_FAIL_SEND(_M) ((_M)->Flags & fMP_ADAPTER_FAIL_SEND_MASK) +#define MP_IS_NOT_READY(_M) ((_M)->Flags & fMP_ADAPTER_NOT_READY_MASK) +#define MP_IS_READY(_M) !((_M)->Flags & fMP_ADAPTER_NOT_READY_MASK) + +#define MP_HAS_CABLE(_M) !((_M)->Flags & fMP_ADAPTER_NO_CABLE) +#define MP_LINK_DETECTED(_M) !((_M)->Flags & fMP_ADAPTER_LINK_DETECTION) + +/* Counters for error rate monitoring */ +typedef struct _MP_ERR_COUNTERS { + u32 PktCountTxPackets; + u32 PktCountTxErrors; + u32 TimerBasedTxErrors; + u32 PktCountLastError; + u32 ErredConsecPackets; +} MP_ERR_COUNTERS, *PMP_ERR_COUNTERS; + +/* RFD (Receive Frame Descriptor) */ +typedef struct _MP_RFD { + struct list_head list_node; + struct sk_buff *Packet; + u32 PacketSize; // total size of receive frame + u16 iBufferIndex; + u8 iRingIndex; +} MP_RFD, *PMP_RFD; + +/* Enum for Flow Control */ +typedef enum _eflow_control_t { + Both = 0, + TxOnly = 1, + RxOnly = 2, + None = 3 +} eFLOW_CONTROL_t, *PeFLOW_CONTROL_t; + +/* Struct to define some device statistics */ +typedef struct _ce_stats_t { + /* Link Input/Output stats */ + uint64_t ipackets; // # of in packets + uint64_t opackets; // # of out packets + + /* MIB II variables + * + * NOTE: atomic_t types are only guaranteed to store 24-bits; if we + * MUST have 32, then we'll need another way to perform atomic + * operations + */ + u32 unircv; // # multicast packets received + atomic_t unixmt; // # multicast packets for Tx + u32 multircv; // # multicast packets received + atomic_t multixmt; // # multicast packets for Tx + u32 brdcstrcv; // # broadcast packets received + atomic_t brdcstxmt; // # broadcast packets for Tx + u32 norcvbuf; // # Rx packets discarded + u32 noxmtbuf; // # Tx packets discarded + + /* Transciever state informations. */ + u8 xcvr_addr; + u32 xcvr_id; + + /* Tx Statistics. */ + u32 tx_uflo; // Tx Underruns + + u32 collisions; + u32 excessive_collisions; + u32 first_collision; + u32 late_collisions; + u32 max_pkt_error; + u32 tx_deferred; + + /* Rx Statistics. */ + u32 rx_ov_flow; // Rx Over Flow + + u32 length_err; + u32 alignment_err; + u32 crc_err; + u32 code_violations; + u32 other_errors; + +#ifdef CONFIG_ET131X_DEBUG + u32 UnhandledInterruptsPerSec; + u32 RxDmaInterruptsPerSec; + u32 TxDmaInterruptsPerSec; + u32 WatchDogInterruptsPerSec; +#endif /* CONFIG_ET131X_DEBUG */ + + u32 SynchrounousIterations; + INTERRUPT_t InterruptStatus; +} CE_STATS_t, *PCE_STATS_t; + +/* The private adapter structure */ +struct et131x_adapter { + struct net_device *netdev; + struct pci_dev *pdev; + + struct work_struct task; + + /* Flags that indicate current state of the adapter */ + u32 Flags; + u32 HwErrCount; + + /* Configuration */ + u8 PermanentAddress[ETH_ALEN]; + u8 CurrentAddress[ETH_ALEN]; + bool bOverrideAddress; + bool bEepromPresent; + u8 eepromData[2]; + + /* Spinlocks */ + spinlock_t Lock; + + spinlock_t TCBSendQLock; + spinlock_t TCBReadyQLock; + spinlock_t SendHWLock; + spinlock_t SendWaitLock; + + spinlock_t RcvLock; + spinlock_t RcvPendLock; + spinlock_t FbrLock; + + spinlock_t PHYLock; + + /* Packet Filter and look ahead size */ + u32 PacketFilter; + u32 ulLookAhead; + u32 uiLinkSpeed; + u32 uiDuplexMode; + u32 uiAutoNegStatus; + u8 ucLinkStatus; + + /* multicast list */ + u32 MCAddressCount; + u8 MCList[NIC_MAX_MCAST_LIST][ETH_ALEN]; + + /* MAC test */ + TXMAC_TXTEST_t TxMacTest; + + /* Pointer to the device's PCI register space */ + ADDRESS_MAP_t __iomem *CSRAddress; + + /* PCI config space info, for debug purposes only. */ + u8 RevisionID; + u16 VendorID; + u16 DeviceID; + u16 SubVendorID; + u16 SubSystemID; + u32 CacheFillSize; + u16 PciXDevCtl; + u8 pci_lat_timer; + u8 pci_hdr_type; + u8 pci_bist; + u32 pci_cfg_state[64 / sizeof(u32)]; + + /* Registry parameters */ + u8 SpeedDuplex; // speed/duplex + eFLOW_CONTROL_t RegistryFlowControl; // for 802.3x flow control + u8 RegistryWOLMatch; // Enable WOL pattern-matching + u8 RegistryWOLLink; // Link state change is independant + u8 RegistryPhyComa; // Phy Coma mode enable/disable + + u32 RegistryRxMemEnd; // Size of internal rx memory + u8 RegistryMACStat; // If set, read MACSTAT, else don't + u32 RegistryVlanTag; // 802.1q Vlan TAG + u32 RegistryJumboPacket; // Max supported ethernet packet size + + u32 RegistryTxNumBuffers; + u32 RegistryTxTimeInterval; + + u32 RegistryRxNumBuffers; + u32 RegistryRxTimeInterval; + + /* Validation helpers */ + u8 RegistryPMWOL; + u8 RegistryNMIDisable; + u32 RegistryDMACache; + u32 RegistrySCGain; + u8 RegistryPhyLoopbk; // Enable Phy loopback + + /* Derived from the registry: */ + u8 AiForceDpx; // duplex setting + u16 AiForceSpeed; // 'Speed', user over-ride of line speed + eFLOW_CONTROL_t FlowControl; // flow control validated by the far-end + enum { + NETIF_STATUS_INVALID = 0, + NETIF_STATUS_MEDIA_CONNECT, + NETIF_STATUS_MEDIA_DISCONNECT, + NETIF_STATUS_MAX + } MediaState; + u8 DriverNoPhyAccess; + + /* Minimize init-time */ + bool bQueryPending; + bool bSetPending; + bool bResetPending; + struct timer_list ErrorTimer; + bool bLinkTimerActive; + MP_POWER_MGMT PoMgmt; + INTERRUPT_t CachedMaskValue; + + atomic_t RcvRefCount; // Num packets not yet returned + + /* Xcvr status at last poll */ + MI_BMSR_t Bmsr; + + /* Tx Memory Variables */ + TX_RING_t TxRing; + + /* Rx Memory Variables */ + RX_RING_t RxRing; + + /* ET1310 register Access */ + JAGCORE_ACCESS_REGS JagCoreRegs; + PCI_CFG_SPACE_REGS PciCfgRegs; + + /* Loopback specifics */ + u8 ReplicaPhyLoopbk; // Replica Enable + u8 ReplicaPhyLoopbkPF; // Replica Enable Pass/Fail + + /* Stats */ + CE_STATS_t Stats; + + struct net_device_stats net_stats; + struct net_device_stats net_stats_prev; +}; + +#define MPSendPacketsHandler MPSendPackets +#define MP_FREE_SEND_PACKET_FUN(Adapter, pMpTcb) \ + et131x_free_send_packet(Adapter, pMpTcb) +#define MpSendPacketFun(Adapter, Packet) MpSendPacket(Adapter, Packet) + +#endif /* __ET131X_ADAPTER_H__ */ diff --git a/drivers/staging/et131x/et131x_config.c b/drivers/staging/et131x/et131x_config.c new file mode 100644 index 000000000000..0adbaa6ca078 --- /dev/null +++ b/drivers/staging/et131x/et131x_config.c @@ -0,0 +1,325 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_config.c - Handles parsing of configuration data during + * initialization. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#include "et131x_version.h" +#include "et131x_debug.h" +#include "et131x_defs.h" + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/bitops.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> + +#include "et1310_phy.h" +#include "et1310_pm.h" +#include "et1310_jagcore.h" + +#include "et131x_adapter.h" +#include "et131x_initpci.h" +#include "et131x_config.h" + +#include "et1310_tx.h" + +/* Data for debugging facilities */ +#ifdef CONFIG_ET131X_DEBUG +extern dbg_info_t *et131x_dbginfo; +#endif /* CONFIG_ET131X_DEBUG */ + +/* Defines for Parameter Default/Min/Max vaules */ +#define PARM_SPEED_DUPLEX_DEF 0 +#define PARM_SPEED_DUPLEX_MIN 0 +#define PARM_SPEED_DUPLEX_MAX 5 + +#define PARM_VLAN_TAG_DEF 0 +#define PARM_VLAN_TAG_MIN 0 +#define PARM_VLAN_TAG_MAX 4095 + +#define PARM_FLOW_CTL_DEF 0 +#define PARM_FLOW_CTL_MIN 0 +#define PARM_FLOW_CTL_MAX 3 + +#define PARM_WOL_LINK_DEF 3 +#define PARM_WOL_LINK_MIN 0 +#define PARM_WOL_LINK_MAX 3 + +#define PARM_WOL_MATCH_DEF 7 +#define PARM_WOL_MATCH_MIN 0 +#define PARM_WOL_MATCH_MAX 7 + +#define PARM_JUMBO_PKT_DEF 1514 +#define PARM_JUMBO_PKT_MIN 1514 +#define PARM_JUMBO_PKT_MAX 9216 + +#define PARM_PHY_COMA_DEF 0 +#define PARM_PHY_COMA_MIN 0 +#define PARM_PHY_COMA_MAX 1 + +#define PARM_RX_NUM_BUFS_DEF 4 +#define PARM_RX_NUM_BUFS_MIN 1 +#define PARM_RX_NUM_BUFS_MAX 64 + +#define PARM_RX_TIME_INT_DEF 10 +#define PARM_RX_TIME_INT_MIN 2 +#define PARM_RX_TIME_INT_MAX 320 + +#define PARM_TX_NUM_BUFS_DEF 4 +#define PARM_TX_NUM_BUFS_MIN 1 +#define PARM_TX_NUM_BUFS_MAX 40 + +#define PARM_TX_TIME_INT_DEF 40 +#define PARM_TX_TIME_INT_MIN 1 +#define PARM_TX_TIME_INT_MAX 140 + +#define PARM_RX_MEM_END_DEF 0x2bc +#define PARM_RX_MEM_END_MIN 0 +#define PARM_RX_MEM_END_MAX 0x3ff + +#define PARM_MAC_STAT_DEF 1 +#define PARM_MAC_STAT_MIN 0 +#define PARM_MAC_STAT_MAX 1 + +#define PARM_SC_GAIN_DEF 7 +#define PARM_SC_GAIN_MIN 0 +#define PARM_SC_GAIN_MAX 7 + +#define PARM_PM_WOL_DEF 0 +#define PARM_PM_WOL_MIN 0 +#define PARM_PM_WOL_MAX 1 + +#define PARM_NMI_DISABLE_DEF 0 +#define PARM_NMI_DISABLE_MIN 0 +#define PARM_NMI_DISABLE_MAX 2 + +#define PARM_DMA_CACHE_DEF 0 +#define PARM_DMA_CACHE_MIN 0 +#define PARM_DMA_CACHE_MAX 15 + +#define PARM_PHY_LOOPBK_DEF 0 +#define PARM_PHY_LOOPBK_MIN 0 +#define PARM_PHY_LOOPBK_MAX 1 + +#define PARM_MAC_ADDRESS_DEF { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 } + +/* Module parameter for disabling NMI + * et131x_speed_set : + * Set Link speed and dublex manually (0-5) [0] + * 1 : 10Mb Half-Duplex + * 2 : 10Mb Full-Duplex + * 3 : 100Mb Half-Duplex + * 4 : 100Mb Full-Duplex + * 5 : 1000Mb Full-Duplex + * 0 : Auto Speed Auto Dublex // default + */ +static u32 et131x_nmi_disable = PARM_NMI_DISABLE_DEF; +module_param(et131x_nmi_disable, uint, 0); +MODULE_PARM_DESC(et131x_nmi_disable, "Disable NMI (0-2) [0]"); + +/* Module parameter for manual speed setting + * et131x_nmi_disable : + * Disable NMI (0-2) [0] + * 0 : + * 1 : + * 2 : + */ +static u32 et131x_speed_set = PARM_SPEED_DUPLEX_DEF; +module_param(et131x_speed_set, uint, 0); +MODULE_PARM_DESC(et131x_speed_set, + "Set Link speed and dublex manually (0-5) [0] \n 1 : 10Mb Half-Duplex \n 2 : 10Mb Full-Duplex \n 3 : 100Mb Half-Duplex \n 4 : 100Mb Full-Duplex \n 5 : 1000Mb Full-Duplex \n 0 : Auto Speed Auto Dublex"); + +/** + * et131x_config_parse + * @pAdapter: pointer to the private adapter struct + * + * Parses a configuration from some location (module parameters, for example) + * into the private adapter struct + */ +void et131x_config_parse(struct et131x_adapter *pAdapter) +{ + uint8_t macAddrDef[] = PARM_MAC_ADDRESS_DEF; + + DBG_ENTER(et131x_dbginfo); + + /* + * The NDIS driver uses the registry to store persistent per-device + * configuration, and reads this configuration into the appropriate + * elements of the private adapter structure on initialization. + * Because Linux has no analog to the registry, use this function to + * initialize the private adapter structure with a default + * configuration. + * + * One other possibility is to use a series of module parameters which + * can be passed in by the caller when the module is initialized. + * However, this implementation does not allow for seperate + * configurations in the event multiple devices are present, and hence + * will not suffice. + * + * If another method is derived which addresses this problem, this is + * where it should be implemented. + */ + + /* Set the private adapter struct with default values for the + * corresponding parameters + */ + if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF) { + DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n", + et131x_speed_set); + pAdapter->SpeedDuplex = et131x_speed_set; + } else { + pAdapter->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; + } + + // pAdapter->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; + + pAdapter->RegistryVlanTag = PARM_VLAN_TAG_DEF; + pAdapter->RegistryFlowControl = PARM_FLOW_CTL_DEF; + pAdapter->RegistryWOLLink = PARM_WOL_LINK_DEF; + pAdapter->RegistryWOLMatch = PARM_WOL_MATCH_DEF; + pAdapter->RegistryJumboPacket = PARM_JUMBO_PKT_DEF; + pAdapter->RegistryPhyComa = PARM_PHY_COMA_DEF; + pAdapter->RegistryRxNumBuffers = PARM_RX_NUM_BUFS_DEF; + pAdapter->RegistryRxTimeInterval = PARM_RX_TIME_INT_DEF; + pAdapter->RegistryTxNumBuffers = PARM_TX_NUM_BUFS_DEF; + pAdapter->RegistryTxTimeInterval = PARM_TX_TIME_INT_DEF; + pAdapter->RegistryRxMemEnd = PARM_RX_MEM_END_DEF; + pAdapter->RegistryMACStat = PARM_MAC_STAT_DEF; + pAdapter->RegistrySCGain = PARM_SC_GAIN_DEF; + pAdapter->RegistryPMWOL = PARM_PM_WOL_DEF; + + if (et131x_nmi_disable != PARM_NMI_DISABLE_DEF) { + pAdapter->RegistryNMIDisable = et131x_nmi_disable; + } else { + pAdapter->RegistryNMIDisable = PARM_NMI_DISABLE_DEF; + } + + pAdapter->RegistryDMACache = PARM_DMA_CACHE_DEF; + pAdapter->RegistryPhyLoopbk = PARM_PHY_LOOPBK_DEF; + + /* Set the MAC address to a default */ + memcpy(pAdapter->CurrentAddress, macAddrDef, ETH_ALEN); + pAdapter->bOverrideAddress = false; + + DBG_TRACE(et131x_dbginfo, + "Default MAC Address : %02x:%02x:%02x:%02x:%02x:%02x\n", + pAdapter->CurrentAddress[0], pAdapter->CurrentAddress[1], + pAdapter->CurrentAddress[2], pAdapter->CurrentAddress[3], + pAdapter->CurrentAddress[4], pAdapter->CurrentAddress[5]); + + /* Decode SpeedDuplex + * + * Set up as if we are auto negotiating always and then change if we + * go into force mode + */ + pAdapter->AiForceSpeed = 0; // Auto speed + pAdapter->AiForceDpx = 0; // Auto FDX + + /* If we are the 10/100 device, and gigabit is somehow requested then + * knock it down to 100 full. + */ + if ((pAdapter->DeviceID == ET131X_PCI_DEVICE_ID_FAST) && + (pAdapter->SpeedDuplex == 5)) { + pAdapter->SpeedDuplex = 4; + } + + switch (pAdapter->SpeedDuplex) { + case 1: // 10Mb Half-Duplex + pAdapter->AiForceSpeed = 10; + pAdapter->AiForceDpx = 1; + break; + + case 2: // 10Mb Full-Duplex + pAdapter->AiForceSpeed = 10; + pAdapter->AiForceDpx = 2; + break; + + case 3: // 100Mb Half-Duplex + pAdapter->AiForceSpeed = 100; + pAdapter->AiForceDpx = 1; + break; + + case 4: // 100Mb Full-Duplex + pAdapter->AiForceSpeed = 100; + pAdapter->AiForceDpx = 2; + break; + + case 5: // 1000Mb Full-Duplex + pAdapter->AiForceSpeed = 1000; + pAdapter->AiForceDpx = 2; + break; + } + + DBG_LEAVE(et131x_dbginfo); +} diff --git a/drivers/staging/et131x/et131x_config.h b/drivers/staging/et131x/et131x_config.h new file mode 100644 index 000000000000..642c0f6dd6f3 --- /dev/null +++ b/drivers/staging/et131x/et131x_config.h @@ -0,0 +1,67 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_config.h - Defines, structs, enums, prototypes, etc. to support + * et131x_config.c + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef __ET131X_CONFIG_H__ +#define __ET131X_CONFIG_H__ + +/* Forward declaration of the private adapter structure */ +struct et131x_adapter; + +void et131x_config_parse(struct et131x_adapter *adapter); + +#endif /* __ET131X_CONFIG_H__ */ diff --git a/drivers/staging/et131x/et131x_debug.c b/drivers/staging/et131x/et131x_debug.c new file mode 100644 index 000000000000..9ee5bce92c27 --- /dev/null +++ b/drivers/staging/et131x/et131x_debug.c @@ -0,0 +1,218 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_debug.c - Routines used for debugging. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifdef CONFIG_ET131X_DEBUG + +#include "et131x_version.h" +#include "et131x_debug.h" +#include "et131x_defs.h" + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/bitops.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/random.h> + +#include "et1310_phy.h" +#include "et1310_pm.h" +#include "et1310_jagcore.h" + +#include "et131x_adapter.h" +#include "et131x_netdev.h" +#include "et131x_config.h" +#include "et131x_isr.h" + +#include "et1310_address_map.h" +#include "et1310_jagcore.h" +#include "et1310_tx.h" +#include "et1310_rx.h" +#include "et1310_mac.h" + +/* Data for debugging facilities */ +extern dbg_info_t *et131x_dbginfo; + +/** + * DumpTxQueueContents - Dump out the tx queue and the shadow pointers + * @pAdapter: pointer to our adapter structure + */ +void DumpTxQueueContents(int dbgLvl, struct et131x_adapter *pAdapter) +{ + MMC_t __iomem *mmc = &pAdapter->CSRAddress->mmc; + uint32_t TxQueueAddr; + + if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) { + for (TxQueueAddr = 0x200; TxQueueAddr < 0x3ff; TxQueueAddr++) { + MMC_SRAM_ACCESS_t sram_access; + + sram_access.value = readl(&mmc->sram_access.value); + sram_access.bits.req_addr = TxQueueAddr; + sram_access.bits.req_access = 1; + writel(sram_access.value, &mmc->sram_access.value); + + DBG_PRINT("Addr 0x%x, Access 0x%08x\t" + "Value 1 0x%08x, Value 2 0x%08x, " + "Value 3 0x%08x, Value 4 0x%08x, \n", + TxQueueAddr, + readl(&mmc->sram_access.value), + readl(&mmc->sram_word1), + readl(&mmc->sram_word2), + readl(&mmc->sram_word3), + readl(&mmc->sram_word4)); + } + + DBG_PRINT("Shadow Pointers 0x%08x\n", + readl(&pAdapter->CSRAddress->txmac.shadow_ptr.value)); + } +} + +/** + * DumpDeviceBlock + * @pAdapter: pointer to our adapter + * + * Dumps the first 64 regs of each block of the et-1310 (each block is + * mapped to a new page, each page is 4096 bytes). + */ +#define NUM_BLOCKS 8 +void DumpDeviceBlock(int dbgLvl, struct et131x_adapter *pAdapter, + uint32_t Block) +{ + uint32_t Address1, Address2; + uint32_t __iomem *BigDevicePointer = + (uint32_t __iomem *) pAdapter->CSRAddress; + const char *BlockNames[NUM_BLOCKS] = { + "Global", "Tx DMA", "Rx DMA", "Tx MAC", + "Rx MAC", "MAC", "MAC Stat", "MMC" + }; + + /* Output the debug counters to the debug terminal */ + if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) { + DBG_PRINT("%s block\n", BlockNames[Block]); + BigDevicePointer += Block * 1024; + for (Address1 = 0; Address1 < 8; Address1++) { + for (Address2 = 0; Address2 < 8; Address2++) { + if (Block == 0 && + (Address1 * 8 + Address2) == 6) { + DBG_PRINT(" ISR , "); + } else { + DBG_PRINT("0x%08x, ", + readl(BigDevicePointer++)); + } + } + DBG_PRINT("\n"); + } + DBG_PRINT("\n"); + } +} + +/** + * DumpDeviceReg + * @pAdapter: pointer to our adapter + * + * Dumps the first 64 regs of each block of the et-1310 (each block is + * mapped to a new page, each page is 4096 bytes). + */ +void DumpDeviceReg(int dbgLvl, struct et131x_adapter *pAdapter) +{ + uint32_t Address1, Address2; + uint32_t Block; + uint32_t __iomem *BigDevicePointer = + (uint32_t __iomem *) pAdapter->CSRAddress; + uint32_t __iomem *Pointer; + const char *BlockNames[NUM_BLOCKS] = { + "Global", "Tx DMA", "Rx DMA", "Tx MAC", + "Rx MAC", "MAC", "MAC Stat", "MMC" + }; + + /* Output the debug counters to the debug terminal */ + if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) { + for (Block = 0; Block < NUM_BLOCKS; Block++) { + DBG_PRINT("%s block\n", BlockNames[Block]); + Pointer = BigDevicePointer + (Block * 1024); + + for (Address1 = 0; Address1 < 8; Address1++) { + for (Address2 = 0; Address2 < 8; Address2++) { + DBG_PRINT("0x%08x, ", + readl(Pointer++)); + } + DBG_PRINT("\n"); + } + DBG_PRINT("\n"); + } + } +} + +#endif // CONFIG_ET131X_DEBUG diff --git a/drivers/staging/et131x/et131x_debug.h b/drivers/staging/et131x/et131x_debug.h new file mode 100644 index 000000000000..dab608031d0b --- /dev/null +++ b/drivers/staging/et131x/et131x_debug.h @@ -0,0 +1,201 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_debug.h - Defines, structs, enums, prototypes, etc. used for + * outputting debug messages to the system logging facility + * (ksyslogd) + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef __ET131X_DBG_H__ +#define __ET131X_DBG_H__ + +/* Define Masks for debugging types/levels */ +#define DBG_ERROR_ON 0x00000001L +#define DBG_WARNING_ON 0x00000002L +#define DBG_NOTICE_ON 0x00000004L +#define DBG_TRACE_ON 0x00000008L +#define DBG_VERBOSE_ON 0x00000010L +#define DBG_PARAM_ON 0x00000020L +#define DBG_BREAK_ON 0x00000040L +#define DBG_RX_ON 0x00000100L +#define DBG_TX_ON 0x00000200L + +#ifdef CONFIG_ET131X_DEBUG + +/* + * Set the level of debugging if not done with a preprocessor define. See + * et131x_main.c, function et131x_init_module() for how the debug level + * translates into the types of messages displayed. + */ +#ifndef DBG_LVL +#define DBG_LVL 3 +#endif /* DBG_LVL */ + +#define DBG_DEFAULTS (DBG_ERROR_ON | DBG_WARNING_ON | DBG_BREAK_ON ) + +#define DBG_FLAGS(A) (A)->dbgFlags +#define DBG_NAME(A) (A)->dbgName +#define DBG_LEVEL(A) (A)->dbgLevel + +#ifndef DBG_PRINT +#define DBG_PRINT(S...) printk(KERN_DEBUG S) +#endif /* DBG_PRINT */ + +#ifndef DBG_PRINTC +#define DBG_PRINTC(S...) printk(S) +#endif /* DBG_PRINTC */ + +#ifndef DBG_TRAP +#define DBG_TRAP {} /* BUG() */ +#endif /* DBG_TRAP */ + +#define _ENTER_STR ">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>" +#define _LEAVE_STR "<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<" + +#define _DBG_ENTER(A) printk(KERN_DEBUG "%s:%.*s:%s\n", DBG_NAME(A), \ + ++DBG_LEVEL(A), _ENTER_STR, __func__) +#define _DBG_LEAVE(A) printk(KERN_DEBUG "%s:%.*s:%s\n", DBG_NAME(A), \ + DBG_LEVEL(A)--, _LEAVE_STR, __func__) + +#define DBG_ENTER(A) {if (DBG_FLAGS(A) & DBG_TRACE_ON) \ + _DBG_ENTER(A);} + +#define DBG_LEAVE(A) {if (DBG_FLAGS(A) & DBG_TRACE_ON) \ + _DBG_LEAVE(A);} + +#define DBG_PARAM(A,N,F,S...) {if (DBG_FLAGS(A) & DBG_PARAM_ON) \ + DBG_PRINT(" %s -- "F"\n",N,S);} + +#define DBG_ERROR(A,S...) \ + if (DBG_FLAGS(A) & DBG_ERROR_ON) { \ + DBG_PRINT("%s:ERROR:%s ",DBG_NAME(A), __func__); \ + DBG_PRINTC(S); \ + DBG_TRAP; \ + } + +#define DBG_WARNING(A,S...) {if (DBG_FLAGS(A) & DBG_WARNING_ON) \ + {DBG_PRINT("%s:WARNING:%s ",DBG_NAME(A),__func__);DBG_PRINTC(S);}} + +#define DBG_NOTICE(A,S...) {if (DBG_FLAGS(A) & DBG_NOTICE_ON) \ + {DBG_PRINT("%s:NOTICE:%s ",DBG_NAME(A),__func__);DBG_PRINTC(S);}} + +#define DBG_TRACE(A,S...) {if (DBG_FLAGS(A) & DBG_TRACE_ON) \ + {DBG_PRINT("%s:TRACE:%s ",DBG_NAME(A), __func__);DBG_PRINTC(S);}} + +#define DBG_VERBOSE(A,S...) {if (DBG_FLAGS(A) & DBG_VERBOSE_ON) \ + {DBG_PRINT("%s:VERBOSE:%s ",DBG_NAME(A), __func__);DBG_PRINTC(S);}} + +#define DBG_RX(A,S...) {if (DBG_FLAGS(A) & DBG_RX_ON) \ + {DBG_PRINT(S);}} + +#define DBG_RX_ENTER(A) {if (DBG_FLAGS(A) & DBG_RX_ON) \ + _DBG_ENTER(A);} + +#define DBG_RX_LEAVE(A) {if (DBG_FLAGS(A) & DBG_RX_ON) \ + _DBG_LEAVE(A);} + +#define DBG_TX(A,S...) {if (DBG_FLAGS(A) & DBG_TX_ON) \ + {DBG_PRINT(S);}} + +#define DBG_TX_ENTER(A) {if (DBG_FLAGS(A) & DBG_TX_ON) \ + _DBG_ENTER(A);} + +#define DBG_TX_LEAVE(A) {if (DBG_FLAGS(A) & DBG_TX_ON) \ + _DBG_LEAVE(A);} + +#define DBG_ASSERT(C) {if (!(C)) \ + {DBG_PRINT("ASSERT(%s) -- %s#%d (%s)\n", \ + #C,__FILE__,__LINE__,__func__); \ + DBG_TRAP;}} +#define STATIC + +typedef struct { + char *dbgName; + int dbgLevel; + unsigned long dbgFlags; +} dbg_info_t; + +#else /* CONFIG_ET131X_DEBUG */ + +#define DBG_DEFN +#define DBG_TRAP +#define DBG_PRINT(S...) +#define DBG_ENTER(A) +#define DBG_LEAVE(A) +#define DBG_PARAM(A,N,F,S...) +#define DBG_ERROR(A,S...) +#define DBG_WARNING(A,S...) +#define DBG_NOTICE(A,S...) +#define DBG_TRACE(A,S...) +#define DBG_VERBOSE(A,S...) +#define DBG_RX(A,S...) +#define DBG_RX_ENTER(A) +#define DBG_RX_LEAVE(A) +#define DBG_TX(A,S...) +#define DBG_TX_ENTER(A) +#define DBG_TX_LEAVE(A) +#define DBG_ASSERT(C) +#define STATIC static + +#endif /* CONFIG_ET131X_DEBUG */ + +/* Forward declaration of the private adapter structure */ +struct et131x_adapter; + +void DumpTxQueueContents(int dbgLvl, struct et131x_adapter *adapter); +void DumpDeviceBlock(int dbgLvl, struct et131x_adapter *adapter, + unsigned int Block); +void DumpDeviceReg(int dbgLvl, struct et131x_adapter *adapter); + +#endif /* __ET131X_DBG_H__ */ diff --git a/drivers/staging/et131x/et131x_defs.h b/drivers/staging/et131x/et131x_defs.h new file mode 100644 index 000000000000..886cb78698ef --- /dev/null +++ b/drivers/staging/et131x/et131x_defs.h @@ -0,0 +1,128 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_defs.h - Defines, structs, enums, prototypes, etc. to assist with OS + * compatibility + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef __ET131X_DEFS_H__ +#define __ET131X_DEFS_H__ + +/* Packet and header sizes */ +#define NIC_MIN_PACKET_SIZE 60 +#define NIC_HEADER_SIZE ETH_HLEN /* 14 */ + +/* Multicast list size */ +#define NIC_MAX_MCAST_LIST 128 + +/* Supported Filters */ +#define ET131X_PACKET_TYPE_DIRECTED 0x0001 +#define ET131X_PACKET_TYPE_MULTICAST 0x0002 +#define ET131X_PACKET_TYPE_BROADCAST 0x0004 +#define ET131X_PACKET_TYPE_PROMISCUOUS 0x0008 +#define ET131X_PACKET_TYPE_ALL_MULTICAST 0x0010 + +/* Tx Timeout */ +#define ET131X_TX_TIMEOUT (1 * HZ) +#define NIC_SEND_HANG_THRESHOLD 0 + +/* MP_TCB flags */ +#define fMP_DEST_MULTI 0x00000001 +#define fMP_DEST_BROAD 0x00000002 + +/* MP_ADAPTER flags */ +#define fMP_ADAPTER_RECV_LOOKASIDE 0x00000004 +#define fMP_ADAPTER_INTERRUPT_IN_USE 0x00000008 +#define fMP_ADAPTER_SECONDARY 0x00000010 + +/* MP_SHARED flags */ +#define fMP_ADAPTER_SHUTDOWN 0x00100000 +#define fMP_ADAPTER_LOWER_POWER 0x00200000 + +#define fMP_ADAPTER_NON_RECOVER_ERROR 0x00800000 +#define fMP_ADAPTER_RESET_IN_PROGRESS 0x01000000 +#define fMP_ADAPTER_NO_CABLE 0x02000000 +#define fMP_ADAPTER_HARDWARE_ERROR 0x04000000 +#define fMP_ADAPTER_REMOVE_IN_PROGRESS 0x08000000 +#define fMP_ADAPTER_HALT_IN_PROGRESS 0x10000000 +#define fMP_ADAPTER_LINK_DETECTION 0x20000000 + +#define fMP_ADAPTER_FAIL_SEND_MASK 0x3ff00000 +#define fMP_ADAPTER_NOT_READY_MASK 0x3ff00000 + +/* Some offsets in PCI config space that are actually used. */ +#define ET1310_PCI_PM_CAPABILITY 0x40 +#define ET1310_PCI_PM_CSR 0x44 +#define ET1310_PCI_MAX_PYLD 0x4C +#define ET1310_PCI_DEV_CTRL 0x50 +#define ET1310_PCI_DEV_STAT 0x52 +#define ET1310_NMI_DISABLE 0x61 +#define ET1310_PCI_MAC_ADDRESS 0xA4 +#define ET1310_PCI_EEPROM_STATUS 0xB2 +#define ET1310_PCI_PHY_INDEX_REG 0xB4 +#define ET1310_PCI_ACK_NACK 0xC0 +#define ET1310_PCI_REPLAY 0xC2 +#define ET1310_PCI_L0L1LATENCY 0xCF +#define ET1310_PCI_SEL_PHY_CTRL 0xE4 +#define ET1310_PCI_ADVANCED_ERR 0x100 + +/* PCI Vendor/Product IDs */ +#define ET131X_PCI_VENDOR_ID 0x11C1 // Agere Systems +#define ET131X_PCI_DEVICE_ID_GIG 0xED00 // ET1310 1000 Base-T +#define ET131X_PCI_DEVICE_ID_FAST 0xED01 // ET1310 100 Base-T + +/* Define order of magnitude converter */ +#define NANO_IN_A_MICRO 1000 + +#endif /* __ET131X_DEFS_H__ */ diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c new file mode 100644 index 000000000000..4c6f171f5b7c --- /dev/null +++ b/drivers/staging/et131x/et131x_initpci.c @@ -0,0 +1,1046 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_initpci.c - Routines and data used to register the driver with the + * PCI (and PCI Express) subsystem, as well as basic driver + * init and startup. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#include "et131x_version.h" +#include "et131x_debug.h" +#include "et131x_defs.h" + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/bitops.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/random.h> + +#include "et1310_phy.h" +#include "et1310_pm.h" +#include "et1310_jagcore.h" + +#include "et131x_adapter.h" +#include "et131x_netdev.h" +#include "et131x_config.h" +#include "et131x_isr.h" + +#include "et1310_address_map.h" +#include "et1310_jagcore.h" +#include "et1310_tx.h" +#include "et1310_rx.h" +#include "et1310_mac.h" +#include "et1310_eeprom.h" + + +int __devinit et131x_pci_setup(struct pci_dev *pdev, + const struct pci_device_id *ent); +void __devexit et131x_pci_remove(struct pci_dev *pdev); + + +/* Modinfo parameters (filled out using defines from et131x_version.h) */ +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_INFO); +MODULE_LICENSE(DRIVER_LICENSE); + +/* Module Parameters and related data for debugging facilities */ +#ifdef CONFIG_ET131X_DEBUG +static u32 et131x_debug_level = DBG_LVL; +static u32 et131x_debug_flags = DBG_DEFAULTS; + +/* +et131x_debug_level : + Level of debugging desired (0-7) + 7 : DBG_RX_ON | DBG_TX_ON + 6 : DBG_PARAM_ON + 5 : DBG_VERBOSE_ON + 4 : DBG_TRACE_ON + 3 : DBG_NOTICE_ON + 2 : no debug info + 1 : no debug info + 0 : no debug info +*/ + +module_param(et131x_debug_level, uint, 0); +module_param(et131x_debug_flags, uint, 0); + +MODULE_PARM_DESC(et131x_debug_level, "Level of debugging desired (0-7)"); + +static dbg_info_t et131x_info = { DRIVER_NAME_EXT, 0, 0 }; +dbg_info_t *et131x_dbginfo = &et131x_info; +#endif /* CONFIG_ET131X_DEBUG */ + +static struct pci_device_id et131x_pci_table[] __devinitdata = { + {ET131X_PCI_VENDOR_ID, ET131X_PCI_DEVICE_ID_GIG, PCI_ANY_ID, + PCI_ANY_ID, 0, 0, 0UL}, + {ET131X_PCI_VENDOR_ID, ET131X_PCI_DEVICE_ID_FAST, PCI_ANY_ID, + PCI_ANY_ID, 0, 0, 0UL}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, et131x_pci_table); + +static struct pci_driver et131x_driver = { + .name = DRIVER_NAME, + .id_table = et131x_pci_table, + .probe = et131x_pci_setup, + .remove = __devexit_p(et131x_pci_remove), + .suspend = NULL, //et131x_pci_suspend, + .resume = NULL, //et131x_pci_resume, +}; + + +/** + * et131x_init_module - The "main" entry point called on driver initialization + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +int et131x_init_module(void) +{ + int result; + +#ifdef CONFIG_ET131X_DEBUG + /* Set the level of debug messages displayed using the module + * parameter + */ + et131x_dbginfo->dbgFlags = et131x_debug_flags; + + switch (et131x_debug_level) { + case 7: + et131x_dbginfo->dbgFlags |= (DBG_RX_ON | DBG_TX_ON); + + case 6: + et131x_dbginfo->dbgFlags |= DBG_PARAM_ON; + + case 5: + et131x_dbginfo->dbgFlags |= DBG_VERBOSE_ON; + + case 4: + et131x_dbginfo->dbgFlags |= DBG_TRACE_ON; + + case 3: + et131x_dbginfo->dbgFlags |= DBG_NOTICE_ON; + + case 2: + case 1: + case 0: + default: + break; + } +#endif /* CONFIG_ET131X_DEBUG */ + + DBG_ENTER(et131x_dbginfo); + DBG_PRINT("%s\n", DRIVER_INFO); + + result = pci_register_driver(&et131x_driver); + + DBG_LEAVE(et131x_dbginfo); + return result; +} + +/** + * et131x_cleanup_module - The entry point called on driver cleanup + */ +void et131x_cleanup_module(void) +{ + DBG_ENTER(et131x_dbginfo); + + pci_unregister_driver(&et131x_driver); + + DBG_LEAVE(et131x_dbginfo); +} + +/* + * These macros map the driver-specific init_module() and cleanup_module() + * routines so they can be called by the kernel. + */ +module_init(et131x_init_module); +module_exit(et131x_cleanup_module); + + +/** + * et131x_find_adapter - Find the adapter and get all the assigned resources + * @adapter: pointer to our private adapter structure + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) +{ + int result; + uint8_t eepromStat; + uint8_t maxPayload = 0; + uint8_t read_size_reg; + + DBG_ENTER(et131x_dbginfo); + + /* Allow disabling of Non-Maskable Interrupts in I/O space, to + * support validation. + */ + if (adapter->RegistryNMIDisable) { + uint8_t RegisterVal; + + RegisterVal = inb(ET1310_NMI_DISABLE); + RegisterVal &= 0xf3; + + if (adapter->RegistryNMIDisable == 2) { + RegisterVal |= 0xc; + } + + outb(ET1310_NMI_DISABLE, RegisterVal); + } + + /* We first need to check the EEPROM Status code located at offset + * 0xB2 of config space + */ + result = pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, + &eepromStat); + + /* THIS IS A WORKAROUND: + * I need to call this function twice to get my card in a + * LG M1 Express Dual running. I tried also a msleep before this + * function, because I thougth there could be some time condidions + * but it didn't work. Call the whole function twice also work. + */ + result = pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, + &eepromStat); + if (result != PCIBIOS_SUCCESSFUL) { + DBG_ERROR(et131x_dbginfo, "Could not read PCI config space for " + "EEPROM Status\n"); + DBG_LEAVE(et131x_dbginfo); + return -EIO; + } + + /* Determine if the error(s) we care about are present. If they are + * present, we need to fail. + */ + if (eepromStat & 0x4C) { + result = pci_read_config_byte(pdev, PCI_REVISION_ID, + &adapter->RevisionID); + if (result != PCIBIOS_SUCCESSFUL) { + DBG_ERROR(et131x_dbginfo, + "Could not read PCI config space for " + "Revision ID\n"); + DBG_LEAVE(et131x_dbginfo); + return -EIO; + } else if (adapter->RevisionID == 0x01) { + int32_t nLoop; + uint8_t ucTemp[4] = { 0xFE, 0x13, 0x10, 0xFF }; + + /* Re-write the first 4 bytes if we have an eeprom + * present and the revision id is 1, this fixes the + * corruption seen with 1310 B Silicon + */ + for (nLoop = 0; nLoop < 3; nLoop++) { + EepromWriteByte(adapter, nLoop, ucTemp[nLoop], + 0, SINGLE_BYTE); + } + } + + DBG_ERROR(et131x_dbginfo, + "Fatal EEPROM Status Error - 0x%04x\n", eepromStat); + + /* This error could mean that there was an error reading the + * eeprom or that the eeprom doesn't exist. We will treat + * each case the same and not try to gather additional + * information that normally would come from the eeprom, like + * MAC Address + */ + adapter->bEepromPresent = false; + + DBG_LEAVE(et131x_dbginfo); + return -EIO; + } else { + DBG_TRACE(et131x_dbginfo, "EEPROM Status Code - 0x%04x\n", + eepromStat); + adapter->bEepromPresent = true; + } + + /* Read the EEPROM for information regarding LED behavior. Refer to + * ET1310_phy.c, et131x_xcvr_init(), for its use. + */ + EepromReadByte(adapter, 0x70, &adapter->eepromData[0], 0, SINGLE_BYTE); + EepromReadByte(adapter, 0x71, &adapter->eepromData[1], 0, SINGLE_BYTE); + + if (adapter->eepromData[0] != 0xcd) { + adapter->eepromData[1] = 0x00; // Disable all optional features + } + + /* Let's set up the PORT LOGIC Register. First we need to know what + * the max_payload_size is + */ + result = pci_read_config_byte(pdev, ET1310_PCI_MAX_PYLD, &maxPayload); + if (result != PCIBIOS_SUCCESSFUL) { + DBG_ERROR(et131x_dbginfo, "Could not read PCI config space for " + "Max Payload Size\n"); + DBG_LEAVE(et131x_dbginfo); + return -EIO; + } + + /* Program the Ack/Nak latency and replay timers */ + maxPayload &= 0x07; // Only the lower 3 bits are valid + + if (maxPayload < 2) { + const uint16_t AckNak[2] = { 0x76, 0xD0 }; + const uint16_t Replay[2] = { 0x1E0, 0x2ED }; + + result = pci_write_config_word(pdev, ET1310_PCI_ACK_NACK, + AckNak[maxPayload]); + if (result != PCIBIOS_SUCCESSFUL) { + DBG_ERROR(et131x_dbginfo, + "Could not write PCI config space " + "for ACK/NAK\n"); + DBG_LEAVE(et131x_dbginfo); + return -EIO; + } + + result = pci_write_config_word(pdev, ET1310_PCI_REPLAY, + Replay[maxPayload]); + if (result != PCIBIOS_SUCCESSFUL) { + DBG_ERROR(et131x_dbginfo, + "Could not write PCI config space " + "for Replay Timer\n"); + DBG_LEAVE(et131x_dbginfo); + return -EIO; + } + } + + /* l0s and l1 latency timers. We are using default values. + * Representing 001 for L0s and 010 for L1 + */ + result = pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11); + if (result != PCIBIOS_SUCCESSFUL) { + DBG_ERROR(et131x_dbginfo, + "Could not write PCI config space for " + "Latency Timers\n"); + DBG_LEAVE(et131x_dbginfo); + return -EIO; + } + + /* Change the max read size to 2k */ + result = pci_read_config_byte(pdev, 0x51, &read_size_reg); + if (result != PCIBIOS_SUCCESSFUL) { + DBG_ERROR(et131x_dbginfo, + "Could not read PCI config space for Max read size\n"); + DBG_LEAVE(et131x_dbginfo); + return -EIO; + } + + read_size_reg &= 0x8f; + read_size_reg |= 0x40; + + result = pci_write_config_byte(pdev, 0x51, read_size_reg); + if (result != PCIBIOS_SUCCESSFUL) { + DBG_ERROR(et131x_dbginfo, + "Could not write PCI config space for Max read size\n"); + DBG_LEAVE(et131x_dbginfo); + return -EIO; + } + + /* PCI Express Configuration registers 0x48-0x5B (Device Control) */ + result = pci_read_config_word(pdev, ET1310_PCI_DEV_CTRL, + &adapter->PciXDevCtl); + if (result != PCIBIOS_SUCCESSFUL) { + DBG_ERROR(et131x_dbginfo, + "Could not read PCI config space for PCI Express Dev Ctl\n"); + DBG_LEAVE(et131x_dbginfo); + return -EIO; + } + + /* Get MAC address from config space if an eeprom exists, otherwise + * the MAC address there will not be valid + */ + if (adapter->bEepromPresent) { + int i; + + for (i = 0; i < ETH_ALEN; i++) { + result = pci_read_config_byte( + pdev, ET1310_PCI_MAC_ADDRESS + i, + adapter->PermanentAddress + i); + if (result != PCIBIOS_SUCCESSFUL) { + DBG_ERROR(et131x_dbginfo, + "Could not read PCI config space for MAC address\n"); + DBG_LEAVE(et131x_dbginfo); + return -EIO; + } + } + } + + DBG_LEAVE(et131x_dbginfo); + return 0; +} + +/** + * et131x_error_timer_handler + * @data: timer-specific variable; here a pointer to our adapter structure + * + * The routine called when the error timer expires, to track the number of + * recurring errors. + */ +void et131x_error_timer_handler(unsigned long data) +{ + struct et131x_adapter *pAdapter = (struct et131x_adapter *) data; + PM_CSR_t pm_csr; + + pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + + if (pm_csr.bits.pm_phy_sw_coma == 0) { + if (pAdapter->RegistryMACStat) { + UpdateMacStatHostCounters(pAdapter); + } + } else { + DBG_VERBOSE(et131x_dbginfo, + "No interrupts, in PHY coma, pm_csr = 0x%x\n", + pm_csr.value); + } + + if (!pAdapter->Bmsr.bits.link_status && + pAdapter->RegistryPhyComa && + pAdapter->PoMgmt.TransPhyComaModeOnBoot < 11) { + pAdapter->PoMgmt.TransPhyComaModeOnBoot++; + } + + if (pAdapter->PoMgmt.TransPhyComaModeOnBoot == 10) { + if (!pAdapter->Bmsr.bits.link_status + && pAdapter->RegistryPhyComa) { + if (pm_csr.bits.pm_phy_sw_coma == 0) { + // NOTE - This was originally a 'sync with interrupt'. How + // to do that under Linux? + et131x_enable_interrupts(pAdapter); + EnablePhyComa(pAdapter); + } + } + } + + /* This is a periodic timer, so reschedule */ + mod_timer(&pAdapter->ErrorTimer, jiffies + + TX_ERROR_PERIOD * HZ / 1000); +} + +/** + * et131x_link_detection_handler + * + * Timer function for link up at driver load time + */ +void et131x_link_detection_handler(unsigned long data) +{ + struct et131x_adapter *pAdapter = (struct et131x_adapter *) data; + unsigned long lockflags; + + /* Let everyone know that we have run */ + pAdapter->bLinkTimerActive = false; + + if (pAdapter->MediaState == 0) { + spin_lock_irqsave(&pAdapter->Lock, lockflags); + + pAdapter->MediaState = NETIF_STATUS_MEDIA_DISCONNECT; + MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION); + + spin_unlock_irqrestore(&pAdapter->Lock, lockflags); + + netif_carrier_off(pAdapter->netdev); + + pAdapter->bSetPending = false; + } +} + +/** + * et131x_adapter_setup - Set the adapter up as per cassini+ documentation + * @adapter: pointer to our private adapter structure + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +int et131x_adapter_setup(struct et131x_adapter *pAdapter) +{ + int status = 0; + + DBG_ENTER(et131x_dbginfo); + + /* Configure the JAGCore */ + ConfigGlobalRegs(pAdapter); + + ConfigMACRegs1(pAdapter); + ConfigMMCRegs(pAdapter); + + ConfigRxMacRegs(pAdapter); + ConfigTxMacRegs(pAdapter); + + ConfigRxDmaRegs(pAdapter); + ConfigTxDmaRegs(pAdapter); + + ConfigMacStatRegs(pAdapter); + + /* Move the following code to Timer function?? */ + status = et131x_xcvr_find(pAdapter); + + if (status != 0) { + DBG_WARNING(et131x_dbginfo, "Could not find the xcvr\n"); + } + + /* Prepare the TRUEPHY library. */ + ET1310_PhyInit(pAdapter); + + /* Reset the phy now so changes take place */ + ET1310_PhyReset(pAdapter); + + /* Power down PHY */ + ET1310_PhyPowerDown(pAdapter, 1); + + /* + * We need to turn off 1000 base half dulplex, the mac does not + * support it. For the 10/100 part, turn off all gig advertisement + */ + if (pAdapter->DeviceID != ET131X_PCI_DEVICE_ID_FAST) { + ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + } else { + ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + } + + /* Power up PHY */ + ET1310_PhyPowerDown(pAdapter, 0); + + et131x_setphy_normal(pAdapter); + + DBG_LEAVE(et131x_dbginfo); + return status; +} + +/** + * et131x_setup_hardware_properties - set up the MAC Address on the ET1310 + * @adapter: pointer to our private adapter structure + */ +void et131x_setup_hardware_properties(struct et131x_adapter *adapter) +{ + DBG_ENTER(et131x_dbginfo); + + /* If have our default mac from registry and no mac address from + * EEPROM then we need to generate the last octet and set it on the + * device + */ + if (!adapter->bOverrideAddress) { + if (adapter->PermanentAddress[0] == 0x00 && + adapter->PermanentAddress[1] == 0x00 && + adapter->PermanentAddress[2] == 0x00 && + adapter->PermanentAddress[3] == 0x00 && + adapter->PermanentAddress[4] == 0x00 && + adapter->PermanentAddress[5] == 0x00) { + /* + * We need to randomly generate the last octet so we + * decrease our chances of setting the mac address to + * same as another one of our cards in the system + */ + get_random_bytes(&adapter->CurrentAddress[5], 1); + + /* + * We have the default value in the register we are + * working with so we need to copy the current + * address into the permanent address + */ + memcpy(adapter->PermanentAddress, + adapter->CurrentAddress, ETH_ALEN); + } else { + /* We do not have an override address, so set the + * current address to the permanent address and add + * it to the device + */ + memcpy(adapter->CurrentAddress, + adapter->PermanentAddress, ETH_ALEN); + } + } + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_soft_reset - Issue a soft reset to the hardware, complete for ET1310 + * @adapter: pointer to our private adapter structure + */ +void et131x_soft_reset(struct et131x_adapter *adapter) +{ + DBG_ENTER(et131x_dbginfo); + + /* Disable MAC Core */ + writel(0xc00f0000, &adapter->CSRAddress->mac.cfg1.value); + + /* Set everything to a reset value */ + writel(0x7F, &adapter->CSRAddress->global.sw_reset.value); + writel(0x000f0000, &adapter->CSRAddress->mac.cfg1.value); + writel(0x00000000, &adapter->CSRAddress->mac.cfg1.value); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_align_allocated_memory - Align allocated memory on a given boundary + * @adapter: pointer to our adapter structure + * @phys_addr: pointer to Physical address + * @offset: pointer to the offset variable + * @mask: correct mask + */ +void et131x_align_allocated_memory(struct et131x_adapter *adapter, + uint64_t *phys_addr, + uint64_t *offset, uint64_t mask) +{ + uint64_t new_addr; + + DBG_ENTER(et131x_dbginfo); + + *offset = 0; + + new_addr = *phys_addr & ~mask; + + if (new_addr != *phys_addr) { + /* Move to next aligned block */ + new_addr += mask + 1; + /* Return offset for adjusting virt addr */ + *offset = new_addr - *phys_addr; + /* Return new physical address */ + *phys_addr = new_addr; + } + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_adapter_memory_alloc + * @adapter: pointer to our private adapter structure + * + * Returns 0 on success, errno on failure (as defined in errno.h). + * + * Allocate all the memory blocks for send, receive and others. + */ +int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) +{ + int status = 0; + + DBG_ENTER(et131x_dbginfo); + + do { + /* Allocate memory for the Tx Ring */ + status = et131x_tx_dma_memory_alloc(adapter); + if (status != 0) { + DBG_ERROR(et131x_dbginfo, + "et131x_tx_dma_memory_alloc FAILED\n"); + break; + } + + /* Receive buffer memory allocation */ + status = et131x_rx_dma_memory_alloc(adapter); + if (status != 0) { + DBG_ERROR(et131x_dbginfo, + "et131x_rx_dma_memory_alloc FAILED\n"); + et131x_tx_dma_memory_free(adapter); + break; + } + + /* Init receive data structures */ + status = et131x_init_recv(adapter); + if (status != 0) { + DBG_ERROR(et131x_dbginfo, "et131x_init_recv FAILED\n"); + et131x_tx_dma_memory_free(adapter); + et131x_rx_dma_memory_free(adapter); + break; + } + } while (0); + + DBG_LEAVE(et131x_dbginfo); + return status; +} + +/** + * et131x_adapter_memory_free - Free all memory allocated for use by Tx & Rx + * @adapter: pointer to our private adapter structure + */ +void et131x_adapter_memory_free(struct et131x_adapter *adapter) +{ + DBG_ENTER(et131x_dbginfo); + + /* Free DMA memory */ + et131x_tx_dma_memory_free(adapter); + et131x_rx_dma_memory_free(adapter); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_pci_remove + * @pdev: a pointer to the device's pci_dev structure + * + * Registered in the pci_driver structure, this function is called when the + * PCI subsystem detects that a PCI device which matches the information + * contained in the pci_device_id table has been removed. + */ +void __devexit et131x_pci_remove(struct pci_dev *pdev) +{ + struct net_device *netdev; + struct et131x_adapter *adapter; + + DBG_ENTER(et131x_dbginfo); + + /* Retrieve the net_device pointer from the pci_dev struct, as well + * as the private adapter struct + */ + netdev = (struct net_device *) pci_get_drvdata(pdev); + adapter = netdev_priv(netdev); + + /* Perform device cleanup */ + unregister_netdev(netdev); + et131x_adapter_memory_free(adapter); + iounmap(adapter->CSRAddress); + free_netdev(netdev); + pci_release_regions(pdev); + pci_disable_device(pdev); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_pci_setup - Perform device initialization + * @pdev: a pointer to the device's pci_dev structure + * @ent: this device's entry in the pci_device_id table + * + * Returns 0 on success, errno on failure (as defined in errno.h) + * + * Registered in the pci_driver structure, this function is called when the + * PCI subsystem finds a new PCI device which matches the information + * contained in the pci_device_id table. This routine is the equivalent to + * a device insertion routine. + */ +int __devinit et131x_pci_setup(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int result = 0; + int pm_cap; + bool pci_using_dac; + struct net_device *netdev = NULL; + struct et131x_adapter *adapter = NULL; + + DBG_ENTER(et131x_dbginfo); + + /* Enable the device via the PCI subsystem */ + result = pci_enable_device(pdev); + if (result != 0) { + DBG_ERROR(et131x_dbginfo, "pci_enable_device() failed\n"); + goto out; + } + + /* Perform some basic PCI checks */ + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + DBG_ERROR(et131x_dbginfo, + "Can't find PCI device's base address\n"); + result = -ENODEV; + goto out; + } + + result = pci_request_regions(pdev, DRIVER_NAME); + if (result != 0) { + DBG_ERROR(et131x_dbginfo, "Can't get PCI resources\n"); + goto err_disable; + } + + /* Enable PCI bus mastering */ + DBG_TRACE(et131x_dbginfo, "Setting PCI Bus Mastering...\n"); + pci_set_master(pdev); + + /* Query PCI for Power Mgmt Capabilities + * + * NOTE: Now reading PowerMgmt in another location; is this still + * needed? + */ + pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pm_cap == 0) { + DBG_ERROR(et131x_dbginfo, + "Cannot find Power Management capabilities\n"); + result = -EIO; + goto err_release_res; + } + + /* Check the DMA addressing support of this device */ + if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) { + DBG_TRACE(et131x_dbginfo, "64-bit DMA addressing supported\n"); + pci_using_dac = true; + + result = + pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL); + if (result != 0) { + DBG_ERROR(et131x_dbginfo, + "Unable to obtain 64 bit DMA for consistent allocations\n"); + goto err_release_res; + } + } else if (!pci_set_dma_mask(pdev, 0xffffffffULL)) { + DBG_TRACE(et131x_dbginfo, + "64-bit DMA addressing NOT supported\n"); + DBG_TRACE(et131x_dbginfo, + "32-bit DMA addressing will be used\n"); + pci_using_dac = false; + } else { + DBG_ERROR(et131x_dbginfo, "No usable DMA addressing method\n"); + result = -EIO; + goto err_release_res; + } + + /* Allocate netdev and private adapter structs */ + DBG_TRACE(et131x_dbginfo, + "Allocate netdev and private adapter structs...\n"); + netdev = et131x_device_alloc(); + if (netdev == NULL) { + DBG_ERROR(et131x_dbginfo, "Couldn't alloc netdev struct\n"); + result = -ENOMEM; + goto err_release_res; + } + + /* Setup the fundamental net_device and private adapter structure elements */ + DBG_TRACE(et131x_dbginfo, "Setting fundamental net_device info...\n"); + SET_NETDEV_DEV(netdev, &pdev->dev); + if (pci_using_dac) { + //netdev->features |= NETIF_F_HIGHDMA; + } + + /* + * NOTE - Turn this on when we're ready to deal with SG-DMA + * + * NOTE: According to "Linux Device Drivers", 3rd ed, Rubini et al, + * if checksumming is not performed in HW, then the kernel will not + * use SG. + * From pp 510-511: + * + * "Note that the kernel does not perform scatter/gather I/O to your + * device if it does not also provide some form of checksumming as + * well. The reason is that, if the kernel has to make a pass over a + * fragmented ("nonlinear") packet to calculate the checksum, it + * might as well copy the data and coalesce the packet at the same + * time." + * + * This has been verified by setting the flags below and still not + * receiving a scattered buffer from the network stack, so leave it + * off until checksums are calculated in HW. + */ + //netdev->features |= NETIF_F_SG; + //netdev->features |= NETIF_F_NO_CSUM; + //netdev->features |= NETIF_F_LLTX; + + /* Allocate private adapter struct and copy in relevant information */ + adapter = netdev_priv(netdev); + adapter->pdev = pdev; + adapter->netdev = netdev; + adapter->VendorID = pdev->vendor; + adapter->DeviceID = pdev->device; + + /* Do the same for the netdev struct */ + netdev->irq = pdev->irq; + netdev->base_addr = pdev->resource[0].start; + + /* Initialize spinlocks here */ + DBG_TRACE(et131x_dbginfo, "Initialize spinlocks...\n"); + + spin_lock_init(&adapter->Lock); + spin_lock_init(&adapter->TCBSendQLock); + spin_lock_init(&adapter->TCBReadyQLock); + spin_lock_init(&adapter->SendHWLock); + spin_lock_init(&adapter->SendWaitLock); + spin_lock_init(&adapter->RcvLock); + spin_lock_init(&adapter->RcvPendLock); + spin_lock_init(&adapter->FbrLock); + spin_lock_init(&adapter->PHYLock); + + /* Parse configuration parameters into the private adapter struct */ + et131x_config_parse(adapter); + + /* Find the physical adapter + * + * NOTE: This is the equivalent of the MpFindAdapter() routine; can we + * lump it's init with the device specific init below into a + * single init function? + */ + //while (et131x_find_adapter(adapter, pdev) != 0); + et131x_find_adapter(adapter, pdev); + + /* Map the bus-relative registers to system virtual memory */ + DBG_TRACE(et131x_dbginfo, + "Mapping bus-relative registers to virtual memory...\n"); + + adapter->CSRAddress = ioremap_nocache(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (adapter->CSRAddress == NULL) { + DBG_ERROR(et131x_dbginfo, "Cannot map device registers\n"); + result = -ENOMEM; + goto err_free_dev; + } + + /* Perform device-specific initialization here (See code below) */ + + /* If Phy COMA mode was enabled when we went down, disable it here. */ + { + PM_CSR_t GlobalPmCSR = { 0 }; + + GlobalPmCSR.bits.pm_sysclk_gate = 1; + GlobalPmCSR.bits.pm_txclk_gate = 1; + GlobalPmCSR.bits.pm_rxclk_gate = 1; + writel(GlobalPmCSR.value, + &adapter->CSRAddress->global.pm_csr.value); + } + + /* Issue a global reset to the et1310 */ + DBG_TRACE(et131x_dbginfo, "Issuing soft reset...\n"); + et131x_soft_reset(adapter); + + /* Disable all interrupts (paranoid) */ + DBG_TRACE(et131x_dbginfo, "Disable device interrupts...\n"); + et131x_disable_interrupts(adapter); + + /* Allocate DMA memory */ + result = et131x_adapter_memory_alloc(adapter); + if (result != 0) { + DBG_ERROR(et131x_dbginfo, + "Could not alloc adapater memory (DMA)\n"); + goto err_iounmap; + } + + /* Init send data structures */ + DBG_TRACE(et131x_dbginfo, "Init send data structures...\n"); + et131x_init_send(adapter); + + adapter->PoMgmt.PowerState = NdisDeviceStateD0; + + /* Register the interrupt + * + * NOTE - This is being done in the open routine, where most other + * Linux drivers setup IRQ handlers. Make sure device + * interrupts are not turned on before the IRQ is registered!! + * + * What we will do here is setup the task structure for the + * ISR's deferred handler + */ + INIT_WORK(&adapter->task, et131x_isr_handler); + + /* Determine MAC Address, and copy into the net_device struct */ + DBG_TRACE(et131x_dbginfo, "Retrieve MAC address...\n"); + et131x_setup_hardware_properties(adapter); + + memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN); + + /* Setup et1310 as per the documentation */ + DBG_TRACE(et131x_dbginfo, "Setup the adapter...\n"); + et131x_adapter_setup(adapter); + + /* Create a timer to count errors received by the NIC */ + init_timer(&adapter->ErrorTimer); + + adapter->ErrorTimer.expires = jiffies + TX_ERROR_PERIOD * HZ / 1000; + adapter->ErrorTimer.function = et131x_error_timer_handler; + adapter->ErrorTimer.data = (unsigned long)adapter; + + /* Initialize link state */ + et131x_link_detection_handler((unsigned long)adapter); + + /* Intialize variable for counting how long we do not have link status */ + adapter->PoMgmt.TransPhyComaModeOnBoot = 0; + + /* We can enable interrupts now + * + * NOTE - Because registration of interrupt handler is done in the + * device's open(), defer enabling device interrupts to that + * point + */ + + /* Register the net_device struct with the Linux network layer */ + DBG_TRACE(et131x_dbginfo, "Registering net_device...\n"); + if ((result = register_netdev(netdev)) != 0) { + DBG_ERROR(et131x_dbginfo, "register_netdev() failed\n"); + goto err_mem_free; + } + + /* Register the net_device struct with the PCI subsystem. Save a copy + * of the PCI config space for this device now that the device has + * been initialized, just in case it needs to be quickly restored. + */ + pci_set_drvdata(pdev, netdev); + + pci_save_state(adapter->pdev); + +out: + DBG_LEAVE(et131x_dbginfo); + return result; + +err_mem_free: + et131x_adapter_memory_free(adapter); +err_iounmap: + iounmap(adapter->CSRAddress); +err_free_dev: + free_netdev(netdev); +err_release_res: + pci_release_regions(pdev); +err_disable: + pci_disable_device(pdev); + goto out; +} diff --git a/drivers/staging/et131x/et131x_initpci.h b/drivers/staging/et131x/et131x_initpci.h new file mode 100644 index 000000000000..bbacb6277595 --- /dev/null +++ b/drivers/staging/et131x/et131x_initpci.h @@ -0,0 +1,73 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_initpci.h - Header which includes common data and function prototypes + * related to the driver's PCI (and PCI Express) information. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef __ET131X_INITPCI_H__ +#define __ET131X_INITPCI_H__ + +/* Function Prototypes */ +void et131x_align_allocated_memory(struct et131x_adapter *adapter, + u64 *phys_addr, + u64 *offset, u64 mask); + +int et131x_adapter_setup(struct et131x_adapter *adapter); +int et131x_adapter_memory_alloc(struct et131x_adapter *adapter); +void et131x_adapter_memory_free(struct et131x_adapter *adapter); +void et131x_setup_hardware_properties(struct et131x_adapter *adapter); +void et131x_soft_reset(struct et131x_adapter *adapter); + +#endif /* __ET131X_INITPCI_H__ */ diff --git a/drivers/staging/et131x/et131x_isr.c b/drivers/staging/et131x/et131x_isr.c new file mode 100644 index 000000000000..00afad174a62 --- /dev/null +++ b/drivers/staging/et131x/et131x_isr.c @@ -0,0 +1,488 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_isr.c - File which contains the ISR, ISR handler, and related routines + * for processing interrupts from the device. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#include "et131x_version.h" +#include "et131x_debug.h" +#include "et131x_defs.h" + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/bitops.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> + +#include "et1310_phy.h" +#include "et1310_pm.h" +#include "et1310_jagcore.h" +#include "et1310_mac.h" + +#include "et131x_adapter.h" + +/* Data for debugging facilities */ +#ifdef CONFIG_ET131X_DEBUG +extern dbg_info_t *et131x_dbginfo; +#endif /* CONFIG_ET131X_DEBUG */ + +/** + * et131x_isr - The Interrupt Service Routine for the driver. + * @irq: the IRQ on which the interrupt was received. + * @dev_id: device-specific info (here a pointer to a net_device struct) + * + * Returns a value indicating if the interrupt was handled. + */ +irqreturn_t et131x_isr(int irq, void *dev_id) +{ + bool handled = true; + struct net_device *netdev = (struct net_device *)dev_id; + struct et131x_adapter *adapter = NULL; + INTERRUPT_t status; + + if (netdev == NULL || !netif_device_present(netdev)) { + DBG_WARNING(et131x_dbginfo, + "No net_device struct or device not present\n"); + handled = false; + goto out; + } + + adapter = netdev_priv(netdev); + + /* If the adapter is in low power state, then it should not + * recognize any interrupt + */ + + /* Disable Device Interrupts */ + et131x_disable_interrupts(adapter); + + /* Get a copy of the value in the interrupt status register + * so we can process the interrupting section + */ + status.value = readl(&adapter->CSRAddress->global.int_status.value); + + if (adapter->FlowControl == TxOnly || + adapter->FlowControl == Both) { + status.value &= ~INT_MASK_ENABLE; + } else { + status.value &= ~INT_MASK_ENABLE_NO_FLOW; + } + + /* Make sure this is our interrupt */ + if (!status.value) { +#ifdef CONFIG_ET131X_DEBUG + adapter->Stats.UnhandledInterruptsPerSec++; +#endif + handled = false; + DBG_VERBOSE(et131x_dbginfo, "NOT OUR INTERRUPT\n"); + et131x_enable_interrupts(adapter); + goto out; + } + + /* This is our interrupt, so process accordingly */ +#ifdef CONFIG_ET131X_DEBUG + if (status.bits.rxdma_xfr_done) { + adapter->Stats.RxDmaInterruptsPerSec++; + } + + if (status.bits.txdma_isr) { + adapter->Stats.TxDmaInterruptsPerSec++; + } +#endif + + if (status.bits.watchdog_interrupt) { + PMP_TCB pMpTcb = adapter->TxRing.CurrSendHead; + + if (pMpTcb) { + if (++pMpTcb->PacketStaleCount > 1) { + status.bits.txdma_isr = 1; + } + } + + if (adapter->RxRing.UnfinishedReceives) { + status.bits.rxdma_xfr_done = 1; + } else if (pMpTcb == NULL) { + writel(0, &adapter->CSRAddress->global.watchdog_timer); + } + + status.bits.watchdog_interrupt = 0; +#ifdef CONFIG_ET131X_DEBUG + adapter->Stats.WatchDogInterruptsPerSec++; +#endif + } + + if (status.value == 0) { + /* This interrupt has in some way been "handled" by + * the ISR. Either it was a spurious Rx interrupt, or + * it was a Tx interrupt that has been filtered by + * the ISR. + */ + et131x_enable_interrupts(adapter); + goto out; + } + + /* We need to save the interrupt status value for use in our + * DPC. We will clear the software copy of that in that + * routine. + */ + adapter->Stats.InterruptStatus = status; + + /* Schedule the ISR handler as a bottom-half task in the + * kernel's tq_immediate queue, and mark the queue for + * execution + */ + schedule_work(&adapter->task); + +out: + return IRQ_RETVAL(handled); +} + +/** + * et131x_isr_handler - The ISR handler + * @p_adapter, a pointer to the device's private adapter structure + * + * scheduled to run in a deferred context by the ISR. This is where the ISR's + * work actually gets done. + */ +void et131x_isr_handler(struct work_struct *work) +{ + struct et131x_adapter *pAdapter = + container_of(work, struct et131x_adapter, task); + INTERRUPT_t GlobStatus = pAdapter->Stats.InterruptStatus; + ADDRESS_MAP_t __iomem *iomem = pAdapter->CSRAddress; + + /* + * These first two are by far the most common. Once handled, we clear + * their two bits in the status word. If the word is now zero, we + * exit. + */ + /* Handle all the completed Transmit interrupts */ + if (GlobStatus.bits.txdma_isr) { + DBG_TX(et131x_dbginfo, "TXDMA_ISR interrupt\n"); + et131x_handle_send_interrupt(pAdapter); + } + + /* Handle all the completed Receives interrupts */ + if (GlobStatus.bits.rxdma_xfr_done) { + DBG_RX(et131x_dbginfo, "RXDMA_XFR_DONE interrupt\n"); + et131x_handle_recv_interrupt(pAdapter); + } + + GlobStatus.value &= 0xffffffd7; + + if (GlobStatus.value) { + /* Handle the TXDMA Error interrupt */ + if (GlobStatus.bits.txdma_err) { + TXDMA_ERROR_t TxDmaErr; + + /* Following read also clears the register (COR) */ + TxDmaErr.value = readl(&iomem->txdma.TxDmaError.value); + + DBG_WARNING(et131x_dbginfo, + "TXDMA_ERR interrupt, error = %d\n", + TxDmaErr.value); + } + + /* Handle Free Buffer Ring 0 and 1 Low interrupt */ + if (GlobStatus.bits.rxdma_fb_ring0_low || + GlobStatus.bits.rxdma_fb_ring1_low) { + /* + * This indicates the number of unused buffers in + * RXDMA free buffer ring 0 is <= the limit you + * programmed. Free buffer resources need to be + * returned. Free buffers are consumed as packets + * are passed from the network to the host. The host + * becomes aware of the packets from the contents of + * the packet status ring. This ring is queried when + * the packet done interrupt occurs. Packets are then + * passed to the OS. When the OS is done with the + * packets the resources can be returned to the + * ET1310 for re-use. This interrupt is one method of + * returning resources. + */ + DBG_WARNING(et131x_dbginfo, + "RXDMA_FB_RING0_LOW or " + "RXDMA_FB_RING1_LOW interrupt\n"); + + /* If the user has flow control on, then we will + * send a pause packet, otherwise just exit + */ + if (pAdapter->FlowControl == TxOnly || + pAdapter->FlowControl == Both) { + PM_CSR_t pm_csr; + + /* Tell the device to send a pause packet via + * the back pressure register + */ + pm_csr.value = readl(&iomem->global.pm_csr.value); + if (pm_csr.bits.pm_phy_sw_coma == 0) { + TXMAC_BP_CTRL_t bp_ctrl = { 0 }; + + bp_ctrl.bits.bp_req = 1; + bp_ctrl.bits.bp_xonxoff = 1; + writel(bp_ctrl.value, + &iomem->txmac.bp_ctrl.value); + } + } + } + + /* Handle Packet Status Ring Low Interrupt */ + if (GlobStatus.bits.rxdma_pkt_stat_ring_low) { + DBG_WARNING(et131x_dbginfo, + "RXDMA_PKT_STAT_RING_LOW interrupt\n"); + + /* + * Same idea as with the two Free Buffer Rings. + * Packets going from the network to the host each + * consume a free buffer resource and a packet status + * resource. These resoures are passed to the OS. + * When the OS is done with the resources, they need + * to be returned to the ET1310. This is one method + * of returning the resources. + */ + } + + /* Handle RXDMA Error Interrupt */ + if (GlobStatus.bits.rxdma_err) { + /* + * The rxdma_error interrupt is sent when a time-out + * on a request issued by the JAGCore has occurred or + * a completion is returned with an un-successful + * status. In both cases the request is considered + * complete. The JAGCore will automatically re-try the + * request in question. Normally information on events + * like these are sent to the host using the "Advanced + * Error Reporting" capability. This interrupt is + * another way of getting similar information. The + * only thing required is to clear the interrupt by + * reading the ISR in the global resources. The + * JAGCore will do a re-try on the request. Normally + * you should never see this interrupt. If you start + * to see this interrupt occurring frequently then + * something bad has occurred. A reset might be the + * thing to do. + */ + // TRAP(); + + pAdapter->TxMacTest.value = + readl(&iomem->txmac.tx_test.value); + DBG_WARNING(et131x_dbginfo, + "RxDMA_ERR interrupt, error %x\n", + pAdapter->TxMacTest.value); + } + + /* Handle the Wake on LAN Event */ + if (GlobStatus.bits.wake_on_lan) { + /* + * This is a secondary interrupt for wake on LAN. + * The driver should never see this, if it does, + * something serious is wrong. We will TRAP the + * message when we are in DBG mode, otherwise we + * will ignore it. + */ + DBG_ERROR(et131x_dbginfo, "WAKE_ON_LAN interrupt\n"); + } + + /* Handle the PHY interrupt */ + if (GlobStatus.bits.phy_interrupt) { + PM_CSR_t pm_csr; + MI_BMSR_t BmsrInts, BmsrData; + MI_ISR_t myIsr; + + DBG_VERBOSE(et131x_dbginfo, "PHY interrupt\n"); + + /* If we are in coma mode when we get this interrupt, + * we need to disable it. + */ + pm_csr.value = readl(&iomem->global.pm_csr.value); + if (pm_csr.bits.pm_phy_sw_coma == 1) { + /* + * Check to see if we are in coma mode and if + * so, disable it because we will not be able + * to read PHY values until we are out. + */ + DBG_VERBOSE(et131x_dbginfo, + "Device is in COMA mode, " + "need to wake up\n"); + DisablePhyComa(pAdapter); + } + + /* Read the PHY ISR to clear the reason for the + * interrupt. + */ + MiRead(pAdapter, (uint8_t) offsetof(MI_REGS_t, isr), + &myIsr.value); + + if (!pAdapter->ReplicaPhyLoopbk) { + MiRead(pAdapter, + (uint8_t) offsetof(MI_REGS_t, bmsr), + &BmsrData.value); + + BmsrInts.value = + pAdapter->Bmsr.value ^ BmsrData.value; + pAdapter->Bmsr.value = BmsrData.value; + + DBG_VERBOSE(et131x_dbginfo, + "Bmsr.value = 0x%04x," + "Bmsr_ints.value = 0x%04x\n", + BmsrData.value, BmsrInts.value); + + /* Do all the cable in / cable out stuff */ + et131x_Mii_check(pAdapter, BmsrData, BmsrInts); + } + } + + /* Let's move on to the TxMac */ + if (GlobStatus.bits.txmac_interrupt) { + pAdapter->TxRing.TxMacErr.value = + readl(&iomem->txmac.err.value); + + /* + * When any of the errors occur and TXMAC generates + * an interrupt to report these errors, it usually + * means that TXMAC has detected an error in the data + * stream retrieved from the on-chip Tx Q. All of + * these errors are catastrophic and TXMAC won't be + * able to recover data when these errors occur. In + * a nutshell, the whole Tx path will have to be reset + * and re-configured afterwards. + */ + DBG_WARNING(et131x_dbginfo, + "TXMAC interrupt, error 0x%08x\n", + pAdapter->TxRing.TxMacErr.value); + + /* If we are debugging, we want to see this error, + * otherwise we just want the device to be reset and + * continue + */ + //DBG_TRAP(); + } + + /* Handle RXMAC Interrupt */ + if (GlobStatus.bits.rxmac_interrupt) { + /* + * These interrupts are catastrophic to the device, + * what we need to do is disable the interrupts and + * set the flag to cause us to reset so we can solve + * this issue. + */ + // MP_SET_FLAG( pAdapter, fMP_ADAPTER_HARDWARE_ERROR ); + + DBG_WARNING(et131x_dbginfo, + "RXMAC interrupt, error 0x%08x. Requesting reset\n", + readl(&iomem->rxmac.err_reg.value)); + + DBG_WARNING(et131x_dbginfo, + "Enable 0x%08x, Diag 0x%08x\n", + readl(&iomem->rxmac.ctrl.value), + readl(&iomem->rxmac.rxq_diag.value)); + + /* + * If we are debugging, we want to see this error, + * otherwise we just want the device to be reset and + * continue + */ + // TRAP(); + } + + /* Handle MAC_STAT Interrupt */ + if (GlobStatus.bits.mac_stat_interrupt) { + /* + * This means at least one of the un-masked counters + * in the MAC_STAT block has rolled over. Use this + * to maintain the top, software managed bits of the + * counter(s). + */ + DBG_VERBOSE(et131x_dbginfo, "MAC_STAT interrupt\n"); + HandleMacStatInterrupt(pAdapter); + } + + /* Handle SLV Timeout Interrupt */ + if (GlobStatus.bits.slv_timeout) { + /* + * This means a timeout has occured on a read or + * write request to one of the JAGCore registers. The + * Global Resources block has terminated the request + * and on a read request, returned a "fake" value. + * The most likely reasons are: Bad Address or the + * addressed module is in a power-down state and + * can't respond. + */ + DBG_VERBOSE(et131x_dbginfo, "SLV_TIMEOUT interrupt\n"); + } + } + + if (pAdapter->PoMgmt.PowerState == NdisDeviceStateD0) { + et131x_enable_interrupts(pAdapter); + } +} diff --git a/drivers/staging/et131x/et131x_isr.h b/drivers/staging/et131x/et131x_isr.h new file mode 100644 index 000000000000..76a51d56551e --- /dev/null +++ b/drivers/staging/et131x/et131x_isr.h @@ -0,0 +1,65 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_isr.h - Defines, structs, enums, prototypes, etc. pertaining to the + * ISR processing code. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef __ET131X_ISR_H__ +#define __ET131X_ISR_H__ + +irqreturn_t et131x_isr(int irq, void *dev_id); +void et131x_isr_handler(struct work_struct *work); + +#endif /* __ET131X_ISR_H__ */ diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c new file mode 100644 index 000000000000..de65972ff362 --- /dev/null +++ b/drivers/staging/et131x/et131x_netdev.c @@ -0,0 +1,856 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_netdev.c - Routines and data required by all Linux network devices. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#include "et131x_version.h" +#include "et131x_debug.h" +#include "et131x_defs.h" + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/bitops.h> + +#include <linux/mii.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> + +#include "et1310_phy.h" +#include "et1310_pm.h" +#include "et1310_jagcore.h" +#include "et1310_mac.h" +#include "et1310_tx.h" + +#include "et131x_adapter.h" +#include "et131x_isr.h" +#include "et131x_initpci.h" + +/* Data for debugging facilities */ +#ifdef CONFIG_ET131X_DEBUG +extern dbg_info_t *et131x_dbginfo; +#endif /* CONFIG_ET131X_DEBUG */ + +struct net_device_stats *et131x_stats(struct net_device *netdev); +int et131x_open(struct net_device *netdev); +int et131x_close(struct net_device *netdev); +int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd); +void et131x_multicast(struct net_device *netdev); +int et131x_tx(struct sk_buff *skb, struct net_device *netdev); +void et131x_tx_timeout(struct net_device *netdev); +int et131x_change_mtu(struct net_device *netdev, int new_mtu); +int et131x_set_mac_addr(struct net_device *netdev, void *new_mac); +void et131x_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp); +void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid); +void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); + +/** + * et131x_device_alloc + * + * Returns pointer to the allocated and initialized net_device struct for + * this device. + * + * Create instances of net_device and wl_private for the new adapter and + * register the device's entry points in the net_device structure. + */ +struct net_device *et131x_device_alloc(void) +{ + struct net_device *netdev; + + DBG_ENTER(et131x_dbginfo); + + /* Alloc net_device and adapter structs */ + netdev = alloc_etherdev(sizeof(struct et131x_adapter)); + + if (netdev == NULL) { + DBG_ERROR(et131x_dbginfo, + "Alloc of net_device struct failed\n"); + DBG_LEAVE(et131x_dbginfo); + return NULL; + } + + /* Setup the function registration table (and other data) for a + * net_device + */ + //netdev->init = &et131x_init; + //netdev->set_config = &et131x_config; + netdev->get_stats = &et131x_stats; + netdev->open = &et131x_open; + netdev->stop = &et131x_close; + netdev->do_ioctl = &et131x_ioctl; + netdev->set_multicast_list = &et131x_multicast; + netdev->hard_start_xmit = &et131x_tx; + netdev->tx_timeout = &et131x_tx_timeout; + netdev->watchdog_timeo = ET131X_TX_TIMEOUT; + netdev->change_mtu = &et131x_change_mtu; + netdev->set_mac_address = &et131x_set_mac_addr; + + //netdev->ethtool_ops = &et131x_ethtool_ops; + + // Poll? + //netdev->poll = &et131x_poll; + //netdev->poll_controller = &et131x_poll_controller; + + DBG_LEAVE(et131x_dbginfo); + return netdev; +} + +/** + * et131x_stats - Return the current device statistics. + * @netdev: device whose stats are being queried + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +struct net_device_stats *et131x_stats(struct net_device *netdev) +{ + struct et131x_adapter *adapter = netdev_priv(netdev); + struct net_device_stats *stats = &adapter->net_stats; + CE_STATS_t *devstat = &adapter->Stats; + + DBG_ENTER(et131x_dbginfo); + + stats->rx_packets = devstat->ipackets; + stats->tx_packets = devstat->opackets; + stats->rx_errors = devstat->length_err + devstat->alignment_err + + devstat->crc_err + devstat->code_violations + devstat->other_errors; + stats->tx_errors = devstat->max_pkt_error; + stats->multicast = devstat->multircv; + stats->collisions = devstat->collisions; + + stats->rx_length_errors = devstat->length_err; + stats->rx_over_errors = devstat->rx_ov_flow; + stats->rx_crc_errors = devstat->crc_err; + + // NOTE: These stats don't have corresponding values in CE_STATS, so we're + // going to have to update these directly from within the TX/RX code + //stats->rx_bytes = 20; //devstat->; + //stats->tx_bytes = 20; //devstat->; + //stats->rx_dropped = devstat->; + //stats->tx_dropped = devstat->; + + // NOTE: Not used, can't find analogous statistics + //stats->rx_frame_errors = devstat->; + //stats->rx_fifo_errors = devstat->; + //stats->rx_missed_errors = devstat->; + + //stats->tx_aborted_errors = devstat->; + //stats->tx_carrier_errors = devstat->; + //stats->tx_fifo_errors = devstat->; + //stats->tx_heartbeat_errors = devstat->; + //stats->tx_window_errors = devstat->; + + DBG_LEAVE(et131x_dbginfo); + return stats; +} + +/** + * et131x_open - Open the device for use. + * @netdev: device to be opened + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +int et131x_open(struct net_device *netdev) +{ + int result = 0; + struct et131x_adapter *adapter = netdev_priv(netdev); + + DBG_ENTER(et131x_dbginfo); + + /* Start the timer to track NIC errors */ + add_timer(&adapter->ErrorTimer); + + /* Register our ISR */ + DBG_TRACE(et131x_dbginfo, "Registering ISR...\n"); + + result = + request_irq(netdev->irq, et131x_isr, IRQF_SHARED, netdev->name, + netdev); + if (result) { + DBG_ERROR(et131x_dbginfo, "Could not register ISR\n"); + DBG_LEAVE(et131x_dbginfo); + return result; + } + + /* Enable the Tx and Rx DMA engines (if not already enabled) */ + et131x_rx_dma_enable(adapter); + et131x_tx_dma_enable(adapter); + + /* Enable device interrupts */ + et131x_enable_interrupts(adapter); + + MP_SET_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE); + + /* We're ready to move some data, so start the queue */ + netif_start_queue(netdev); + + DBG_LEAVE(et131x_dbginfo); + return result; +} + +/** + * et131x_close - Close the device + * @netdev: device to be closed + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +int et131x_close(struct net_device *netdev) +{ + struct et131x_adapter *adapter = netdev_priv(netdev); + + DBG_ENTER(et131x_dbginfo); + + /* First thing is to stop the queue */ + netif_stop_queue(netdev); + + /* Stop the Tx and Rx DMA engines */ + et131x_rx_dma_disable(adapter); + et131x_tx_dma_disable(adapter); + + /* Disable device interrupts */ + et131x_disable_interrupts(adapter); + + /* Deregistering ISR */ + MP_CLEAR_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE); + + DBG_TRACE(et131x_dbginfo, "Deregistering ISR...\n"); + free_irq(netdev->irq, netdev); + + /* Stop the error timer */ + del_timer_sync(&adapter->ErrorTimer); + + DBG_LEAVE(et131x_dbginfo); + return 0; +} + +/** + * et131x_ioctl_mii - The function which handles MII IOCTLs + * @netdev: device on which the query is being made + * @reqbuf: the request-specific data buffer + * @cmd: the command request code + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd) +{ + int status = 0; + struct et131x_adapter *pAdapter = netdev_priv(netdev); + struct mii_ioctl_data *data = if_mii(reqbuf); + + DBG_ENTER(et131x_dbginfo); + + switch (cmd) { + case SIOCGMIIPHY: + DBG_VERBOSE(et131x_dbginfo, "SIOCGMIIPHY\n"); + data->phy_id = pAdapter->Stats.xcvr_addr; + break; + + case SIOCGMIIREG: + DBG_VERBOSE(et131x_dbginfo, "SIOCGMIIREG\n"); + if (!capable(CAP_NET_ADMIN)) { + status = -EPERM; + } else { + status = MiRead(pAdapter, + data->reg_num, &data->val_out); + } + break; + + case SIOCSMIIREG: + DBG_VERBOSE(et131x_dbginfo, "SIOCSMIIREG\n"); + if (!capable(CAP_NET_ADMIN)) { + status = -EPERM; + } else { + status = MiWrite(pAdapter, data->reg_num, + data->val_in); + } + break; + + default: + status = -EOPNOTSUPP; + } + + DBG_LEAVE(et131x_dbginfo); + return status; +} + +/** + * et131x_ioctl - The I/O Control handler for the driver + * @netdev: device on which the control request is being made + * @reqbuf: a pointer to the IOCTL request buffer + * @cmd: the IOCTL command code + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd) +{ + int status = 0; + + DBG_ENTER(et131x_dbginfo); + + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + status = et131x_ioctl_mii(netdev, reqbuf, cmd); + break; + + default: + DBG_WARNING(et131x_dbginfo, "Unhandled IOCTL Code: 0x%04x\n", + cmd); + status = -EOPNOTSUPP; + } + + DBG_LEAVE(et131x_dbginfo); + return status; +} + +/** + * et131x_set_packet_filter - Configures the Rx Packet filtering on the device + * @adapter: pointer to our private adapter structure + * + * Returns 0 on success, errno on failure + */ +int et131x_set_packet_filter(struct et131x_adapter *adapter) +{ + int status = 0; + uint32_t filter = adapter->PacketFilter; + RXMAC_CTRL_t ctrl; + RXMAC_PF_CTRL_t pf_ctrl; + + DBG_ENTER(et131x_dbginfo); + + ctrl.value = readl(&adapter->CSRAddress->rxmac.ctrl.value); + pf_ctrl.value = readl(&adapter->CSRAddress->rxmac.pf_ctrl.value); + + /* Default to disabled packet filtering. Enable it in the individual + * case statements that require the device to filter something + */ + ctrl.bits.pkt_filter_disable = 1; + + /* Set us to be in promiscuous mode so we receive everything, this + * is also true when we get a packet filter of 0 + */ + if ((filter & ET131X_PACKET_TYPE_PROMISCUOUS) || filter == 0) { + pf_ctrl.bits.filter_broad_en = 0; + pf_ctrl.bits.filter_multi_en = 0; + pf_ctrl.bits.filter_uni_en = 0; + } else { + /* + * Set us up with Multicast packet filtering. Three cases are + * possible - (1) we have a multi-cast list, (2) we receive ALL + * multicast entries or (3) we receive none. + */ + if (filter & ET131X_PACKET_TYPE_ALL_MULTICAST) { + DBG_VERBOSE(et131x_dbginfo, + "Multicast filtering OFF (Rx ALL MULTICAST)\n"); + pf_ctrl.bits.filter_multi_en = 0; + } else { + DBG_VERBOSE(et131x_dbginfo, "Multicast filtering ON\n"); + SetupDeviceForMulticast(adapter); + pf_ctrl.bits.filter_multi_en = 1; + ctrl.bits.pkt_filter_disable = 0; + } + + /* Set us up with Unicast packet filtering */ + if (filter & ET131X_PACKET_TYPE_DIRECTED) { + DBG_VERBOSE(et131x_dbginfo, "Unicast Filtering ON\n"); + SetupDeviceForUnicast(adapter); + pf_ctrl.bits.filter_uni_en = 1; + ctrl.bits.pkt_filter_disable = 0; + } + + /* Set us up with Broadcast packet filtering */ + if (filter & ET131X_PACKET_TYPE_BROADCAST) { + DBG_VERBOSE(et131x_dbginfo, "Broadcast Filtering ON\n"); + pf_ctrl.bits.filter_broad_en = 1; + ctrl.bits.pkt_filter_disable = 0; + } else { + DBG_VERBOSE(et131x_dbginfo, + "Broadcast Filtering OFF\n"); + pf_ctrl.bits.filter_broad_en = 0; + } + + /* Setup the receive mac configuration registers - Packet + * Filter control + the enable / disable for packet filter + * in the control reg. + */ + writel(pf_ctrl.value, + &adapter->CSRAddress->rxmac.pf_ctrl.value); + writel(ctrl.value, &adapter->CSRAddress->rxmac.ctrl.value); + } + + DBG_LEAVE(et131x_dbginfo); + return status; +} + +/** + * et131x_multicast - The handler to configure multicasting on the interface + * @netdev: a pointer to a net_device struct representing the device + */ +void et131x_multicast(struct net_device *netdev) +{ + struct et131x_adapter *adapter = netdev_priv(netdev); + uint32_t PacketFilter = 0; + uint32_t count; + unsigned long lockflags; + struct dev_mc_list *mclist = netdev->mc_list; + + DBG_ENTER(et131x_dbginfo); + + spin_lock_irqsave(&adapter->Lock, lockflags); + + /* Before we modify the platform-independent filter flags, store them + * locally. This allows us to determine if anything's changed and if + * we even need to bother the hardware + */ + PacketFilter = adapter->PacketFilter; + + /* Clear the 'multicast' flag locally; becuase we only have a single + * flag to check multicast, and multiple multicast addresses can be + * set, this is the easiest way to determine if more than one + * multicast address is being set. + */ + PacketFilter &= ~ET131X_PACKET_TYPE_MULTICAST; + + /* Check the net_device flags and set the device independent flags + * accordingly + */ + DBG_VERBOSE(et131x_dbginfo, + "MULTICAST ADDR COUNT: %d\n", netdev->mc_count); + + if (netdev->flags & IFF_PROMISC) { + DBG_VERBOSE(et131x_dbginfo, "Request: PROMISCUOUS MODE ON\n"); + adapter->PacketFilter |= ET131X_PACKET_TYPE_PROMISCUOUS; + } else { + DBG_VERBOSE(et131x_dbginfo, "Request: PROMISCUOUS MODE OFF\n"); + adapter->PacketFilter &= ~ET131X_PACKET_TYPE_PROMISCUOUS; + } + + if (netdev->flags & IFF_ALLMULTI) { + DBG_VERBOSE(et131x_dbginfo, "Request: ACCEPT ALL MULTICAST\n"); + adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST; + } + + if (netdev->mc_count > NIC_MAX_MCAST_LIST) { + DBG_WARNING(et131x_dbginfo, + "ACCEPT ALL MULTICAST for now, as there's more Multicast " + "addresses than the HW supports\n"); + + adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST; + } + + if (netdev->mc_count < 1) { + DBG_VERBOSE(et131x_dbginfo, "Request: REJECT ALL MULTICAST\n"); + adapter->PacketFilter &= ~ET131X_PACKET_TYPE_ALL_MULTICAST; + adapter->PacketFilter &= ~ET131X_PACKET_TYPE_MULTICAST; + } else { + DBG_VERBOSE(et131x_dbginfo, + "Request: SET MULTICAST FILTER(S)\n"); + adapter->PacketFilter |= ET131X_PACKET_TYPE_MULTICAST; + } + + /* Set values in the private adapter struct */ + adapter->MCAddressCount = netdev->mc_count; + + if (netdev->mc_count) { + if (mclist->dmi_addrlen != ETH_ALEN) { + DBG_WARNING(et131x_dbginfo, + "Multicast addrs are not ETH_ALEN in size\n"); + } else { + count = netdev->mc_count - 1; + memcpy(adapter->MCList[count], mclist->dmi_addr, + ETH_ALEN); + } + } + + /* Are the new flags different from the previous ones? If not, then no + * action is required + * + * NOTE - This block will always update the MCList with the hardware, + * even if the addresses aren't the same. + */ + if (PacketFilter != adapter->PacketFilter) { + /* Call the device's filter function */ + DBG_VERBOSE(et131x_dbginfo, "UPDATE REQUIRED, FLAGS changed\n"); + + et131x_set_packet_filter(adapter); + } else { + DBG_VERBOSE(et131x_dbginfo, + "NO UPDATE REQUIRED, FLAGS didn't change\n"); + } + + spin_unlock_irqrestore(&adapter->Lock, lockflags); + + DBG_LEAVE(et131x_dbginfo); +} + +/** + * et131x_tx - The handler to tx a packet on the device + * @skb: data to be Tx'd + * @netdev: device on which data is to be Tx'd + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +int et131x_tx(struct sk_buff *skb, struct net_device *netdev) +{ + int status = 0; + + DBG_TX_ENTER(et131x_dbginfo); + + /* Save the timestamp for the TX timeout watchdog */ + netdev->trans_start = jiffies; + + /* Call the device-specific data Tx routine */ + status = et131x_send_packets(skb, netdev); + + /* Check status and manage the netif queue if necessary */ + if (status != 0) { + if (status == -ENOMEM) { + DBG_VERBOSE(et131x_dbginfo, + "OUT OF TCBs; STOP NETIF QUEUE\n"); + + /* Put the queue to sleep until resources are + * available + */ + netif_stop_queue(netdev); + status = 1; + } else { + DBG_WARNING(et131x_dbginfo, + "Misc error; drop packet\n"); + status = 0; + } + } + + DBG_TX_LEAVE(et131x_dbginfo); + return status; +} + +/** + * et131x_tx_timeout - Timeout handler + * @netdev: a pointer to a net_device struct representing the device + * + * The handler called when a Tx request times out. The timeout period is + * specified by the 'tx_timeo" element in the net_device structure (see + * et131x_alloc_device() to see how this value is set). + */ +void et131x_tx_timeout(struct net_device *netdev) +{ + struct et131x_adapter *pAdapter = netdev_priv(netdev); + PMP_TCB pMpTcb; + unsigned long lockflags; + + DBG_WARNING(et131x_dbginfo, "TX TIMEOUT\n"); + + /* Just skip this part if the adapter is doing link detection */ + if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION)) { + DBG_ERROR(et131x_dbginfo, "Still doing link detection\n"); + return; + } + + /* Any nonrecoverable hardware error? + * Checks adapter->flags for any failure in phy reading + */ + if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_NON_RECOVER_ERROR)) { + DBG_WARNING(et131x_dbginfo, "Non recoverable error - remove\n"); + return; + } + + /* Hardware failure? */ + if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_HARDWARE_ERROR)) { + DBG_WARNING(et131x_dbginfo, "hardware error - reset\n"); + return; + } + + /* Is send stuck? */ + spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + + pMpTcb = pAdapter->TxRing.CurrSendHead; + + if (pMpTcb != NULL) { + pMpTcb->Count++; + + if (pMpTcb->Count > NIC_SEND_HANG_THRESHOLD) { +#ifdef CONFIG_ET131X_DEBUG + TX_STATUS_BLOCK_t txDmaComplete = + *(pAdapter->TxRing.pTxStatusVa); + PTX_DESC_ENTRY_t pDesc = + pAdapter->TxRing.pTxDescRingVa + + pMpTcb->WrIndex.bits.val; +#endif + TX_DESC_ENTRY_t StuckDescriptors[10]; + + if (pMpTcb->WrIndex.bits.val > 7) { + memcpy(StuckDescriptors, + pAdapter->TxRing.pTxDescRingVa + + pMpTcb->WrIndex.bits.val - 6, + sizeof(TX_DESC_ENTRY_t) * 10); + } + + spin_unlock_irqrestore(&pAdapter->TCBSendQLock, + lockflags); + + DBG_WARNING(et131x_dbginfo, + "Send stuck - reset. pMpTcb->WrIndex %x, Flags 0x%08x\n", + pMpTcb->WrIndex.bits.val, + pMpTcb->Flags); + + DBG_WARNING(et131x_dbginfo, + "pDesc 0x%08x, 0x%08x, 0x%08x, 0x%08x\n", + pDesc->DataBufferPtrHigh, + pDesc->DataBufferPtrLow, pDesc->word2.value, + pDesc->word3.value); + + DBG_WARNING(et131x_dbginfo, + "WbStatus 0x%08x\n", txDmaComplete.value); + +#ifdef CONFIG_ET131X_DEBUG + DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 0); + DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 1); + DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 3); + DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 5); +#endif + et131x_close(netdev); + et131x_open(netdev); + + return; + } + } + + spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); +} + +/** + * et131x_change_mtu - The handler called to change the MTU for the device + * @netdev: device whose MTU is to be changed + * @new_mtu: the desired MTU + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +int et131x_change_mtu(struct net_device *netdev, int new_mtu) +{ + int result = 0; + struct et131x_adapter *adapter = netdev_priv(netdev); + + DBG_ENTER(et131x_dbginfo); + + /* Make sure the requested MTU is valid */ + if (new_mtu == 0 || new_mtu > 9216) { + DBG_LEAVE(et131x_dbginfo); + return -EINVAL; + } + + /* Stop the netif queue */ + netif_stop_queue(netdev); + + /* Stop the Tx and Rx DMA engines */ + et131x_rx_dma_disable(adapter); + et131x_tx_dma_disable(adapter); + + /* Disable device interrupts */ + et131x_disable_interrupts(adapter); + et131x_handle_send_interrupt(adapter); + et131x_handle_recv_interrupt(adapter); + + /* Set the new MTU */ + netdev->mtu = new_mtu; + + /* Free Rx DMA memory */ + et131x_adapter_memory_free(adapter); + + /* Set the config parameter for Jumbo Packet support */ + adapter->RegistryJumboPacket = new_mtu + 14; + et131x_soft_reset(adapter); + + /* Alloc and init Rx DMA memory */ + result = et131x_adapter_memory_alloc(adapter); + if (result != 0) { + DBG_WARNING(et131x_dbginfo, + "Change MTU failed; couldn't re-alloc DMA memory\n"); + return result; + } + + et131x_init_send(adapter); + + et131x_setup_hardware_properties(adapter); + memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN); + + /* Init the device with the new settings */ + et131x_adapter_setup(adapter); + + /* Enable interrupts */ + if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE)) { + et131x_enable_interrupts(adapter); + } + + /* Restart the Tx and Rx DMA engines */ + et131x_rx_dma_enable(adapter); + et131x_tx_dma_enable(adapter); + + /* Restart the netif queue */ + netif_wake_queue(netdev); + + DBG_LEAVE(et131x_dbginfo); + return result; +} + +/** + * et131x_set_mac_addr - handler to change the MAC address for the device + * @netdev: device whose MAC is to be changed + * @new_mac: the desired MAC address + * + * Returns 0 on success, errno on failure (as defined in errno.h) + * + * IMPLEMENTED BY : blux http://berndlux.de 22.01.2007 21:14 + */ +int et131x_set_mac_addr(struct net_device *netdev, void *new_mac) +{ + int result = 0; + struct et131x_adapter *adapter = netdev_priv(netdev); + struct sockaddr *address = new_mac; + + DBG_ENTER(et131x_dbginfo); + // begin blux + // DBG_VERBOSE( et131x_dbginfo, "Function not implemented!!\n" ); + + if (adapter == NULL) { + DBG_LEAVE(et131x_dbginfo); + return -ENODEV; + } + + /* Make sure the requested MAC is valid */ + if (!is_valid_ether_addr(address->sa_data)) { + DBG_LEAVE(et131x_dbginfo); + return -EINVAL; + } + + /* Stop the netif queue */ + netif_stop_queue(netdev); + + /* Stop the Tx and Rx DMA engines */ + et131x_rx_dma_disable(adapter); + et131x_tx_dma_disable(adapter); + + /* Disable device interrupts */ + et131x_disable_interrupts(adapter); + et131x_handle_send_interrupt(adapter); + et131x_handle_recv_interrupt(adapter); + + /* Set the new MAC */ + // netdev->set_mac_address = &new_mac; + // netdev->mtu = new_mtu; + + memcpy(netdev->dev_addr, address->sa_data, netdev->addr_len); + + printk("%s: Setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n", + netdev->name, netdev->dev_addr[0], netdev->dev_addr[1], + netdev->dev_addr[2], netdev->dev_addr[3], netdev->dev_addr[4], + netdev->dev_addr[5]); + + /* Free Rx DMA memory */ + et131x_adapter_memory_free(adapter); + + /* Set the config parameter for Jumbo Packet support */ + // adapter->RegistryJumboPacket = new_mtu + 14; + // blux: not needet here, w'll change the MAC + + et131x_soft_reset(adapter); + + /* Alloc and init Rx DMA memory */ + result = et131x_adapter_memory_alloc(adapter); + if (result != 0) { + DBG_WARNING(et131x_dbginfo, + "Change MAC failed; couldn't re-alloc DMA memory\n"); + return result; + } + + et131x_init_send(adapter); + + et131x_setup_hardware_properties(adapter); + // memcpy( netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN ); + // blux: no, do not override our nice address + + /* Init the device with the new settings */ + et131x_adapter_setup(adapter); + + /* Enable interrupts */ + if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE)) { + et131x_enable_interrupts(adapter); + } + + /* Restart the Tx and Rx DMA engines */ + et131x_rx_dma_enable(adapter); + et131x_tx_dma_enable(adapter); + + /* Restart the netif queue */ + netif_wake_queue(netdev); + + DBG_LEAVE(et131x_dbginfo); + return result; +} diff --git a/drivers/staging/et131x/et131x_netdev.h b/drivers/staging/et131x/et131x_netdev.h new file mode 100644 index 000000000000..b8acd14ff830 --- /dev/null +++ b/drivers/staging/et131x/et131x_netdev.h @@ -0,0 +1,64 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_netdev.h - Defines, structs, enums, prototypes, etc. related to the + * driver's net_device support. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef __ET131X_NETDEV_H__ +#define __ET131X_NETDEV_H__ + +struct net_device *et131x_device_alloc(void); + +#endif /* __ET131X_NETDEV_H__ */ diff --git a/drivers/staging/et131x/et131x_version.h b/drivers/staging/et131x/et131x_version.h new file mode 100644 index 000000000000..2ea645e1066e --- /dev/null +++ b/drivers/staging/et131x/et131x_version.h @@ -0,0 +1,81 @@ +/* + * Agere Systems Inc. + * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * http://www.agere.com + * + *------------------------------------------------------------------------------ + * + * et131x_version.h - This file provides system and device version information. + * + *------------------------------------------------------------------------------ + * + * SOFTWARE LICENSE + * + * This software is provided subject to the following terms and conditions, + * which you should read carefully before using the software. Using this + * software indicates your acceptance of these terms and conditions. If you do + * not agree with these terms and conditions, do not use the software. + * + * Copyright © 2005 Agere Systems Inc. + * All rights reserved. + * + * Redistribution and use in source or binary forms, with or without + * modifications, are permitted provided that the following conditions are met: + * + * . Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following Disclaimer as comments in the code as + * well as in the documentation and/or other materials provided with the + * distribution. + * + * . Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following Disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * . Neither the name of Agere Systems Inc. nor the names of the contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Disclaimer + * + * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY + * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN + * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef __ET131X_VERSION_H__ +#define __ET131X_VERSION_H__ + +#define DRIVER_AUTHOR "Victor Soriano (vjsoriano@agere.com)" +#define DRIVER_LICENSE "Dual BSD/GPL" +#define DRIVER_DEVICE_STRING "ET1310" +#define DRIVER_NAME "et131x" +#define DRIVER_MAJOR_VERSION 1 +#define DRIVER_MINOR_VERSION 2 +#define DRIVER_PATCH_VERSION 3 +#define DRIVER_VERSION_STRING "1.2.3" +#define DRIVER_VENDOR "Agere Systems, http://www.agere.com" +#define DRIVER_DESC "10/100/1000 Base-T Ethernet Driver" + +#define STRUCT_MODULE "net" /* blux: missed by the kernel */ + +#define DRIVER_INFO DRIVER_DESC " for the "\ + DRIVER_DEVICE_STRING ", v" \ + DRIVER_VERSION_STRING " by " \ + DRIVER_VENDOR + +#define DRIVER_NAME_EXT "et131x.ko" + +#endif /* __ET131X_VERSION_H__ */ |