summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/Kconfig6
-rw-r--r--drivers/ata/ahci.c21
-rw-r--r--drivers/ata/libata-sff.c5
-rw-r--r--drivers/ata/pata_marvell.c51
-rw-r--r--drivers/ata/pata_sil680.c3
-rw-r--r--drivers/ata/sata_mv.c3
-rw-r--r--drivers/ata/sata_nv.c19
-rw-r--r--drivers/s390/cio/chp.c7
-rw-r--r--drivers/s390/cio/cio.c4
-rw-r--r--drivers/s390/cio/css.c32
-rw-r--r--drivers/s390/cio/device_fsm.c7
-rw-r--r--drivers/usb/host/ohci-omap.c2
-rw-r--r--drivers/usb/serial/console.c2
-rw-r--r--drivers/xen/balloon.c2
14 files changed, 100 insertions, 64 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ae8494944c45..11c8c19f0fb7 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -448,8 +448,10 @@ config PATA_MARVELL
tristate "Marvell PATA support via legacy mode"
depends on PCI
help
- This option enables limited support for the Marvell 88SE6145 ATA
- controller.
+ This option enables limited support for the Marvell 88SE61xx ATA
+ controllers. If you wish to use only the SATA ports then select
+ the AHCI driver alone. If you wish to the use the PATA port or
+ both SATA and PATA include this driver.
If unsure, say N.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c729e6988bbb..2e1a7cb2ed5f 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = {
/* board_ahci_mv */
{
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
- AHCI_HFLAG_MV_PATA),
+ AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
.pio_mask = 0x1f, /* pio0-4 */
@@ -487,7 +487,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -610,6 +612,15 @@ module_param(ahci_em_messages, int, 0444);
MODULE_PARM_DESC(ahci_em_messages,
"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+static int marvell_enable;
+#else
+static int marvell_enable = 1;
+#endif
+module_param(marvell_enable, int, 0644);
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+
+
static inline int ahci_nr_ports(u32 cap)
{
return (cap & 0x1f) + 1;
@@ -732,6 +743,8 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
"MV_AHCI HACK: port_map %x -> %x\n",
port_map,
port_map & mv);
+ dev_printk(KERN_ERR, &pdev->dev,
+ "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
port_map &= mv;
}
@@ -2533,6 +2546,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ /* The AHCI driver can only drive the SATA ports, the PATA driver
+ can drive them all so if both drivers are selected make sure
+ AHCI stays out of the way */
+ if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
+ return -ENODEV;
+
/* acquire resources */
rc = pcim_enable_device(pdev);
if (rc)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 304fdc6f1dc2..2a4c516894f0 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1315,11 +1315,6 @@ fsm_start:
break;
case HSM_ST_ERR:
- /* make sure qc->err_mask is available to
- * know what's wrong and recover
- */
- WARN_ON(!(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM)));
-
ap->hsm_task_state = HSM_ST_IDLE;
/* complete taskfile transaction */
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 24a011b25024..0d87eec84966 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -20,29 +20,30 @@
#include <linux/ata.h>
#define DRV_NAME "pata_marvell"
-#define DRV_VERSION "0.1.4"
+#define DRV_VERSION "0.1.6"
/**
- * marvell_pre_reset - check for 40/80 pin
- * @link: link
- * @deadline: deadline jiffies for the operation
+ * marvell_pata_active - check if PATA is active
+ * @pdev: PCI device
*
- * Perform the PATA port setup we need.
+ * Returns 1 if the PATA port may be active. We know how to check this
+ * for the 6145 but not the other devices
*/
-static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+static int marvell_pata_active(struct pci_dev *pdev)
{
- struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int i;
u32 devices;
void __iomem *barp;
- int i;
- /* Check if our port is enabled */
+ /* We don't yet know how to do this for other devices */
+ if (pdev->device != 0x6145)
+ return 1;
barp = pci_iomap(pdev, 5, 0x10);
if (barp == NULL)
return -ENOMEM;
+
printk("BAR5:");
for(i = 0; i <= 0x0F; i++)
printk("%02X:%02X ", i, ioread8(barp + i));
@@ -51,9 +52,27 @@ static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
devices = ioread32(barp + 0x0C);
pci_iounmap(pdev, barp);
- if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
- (!(devices & 0x10))) /* PATA enable ? */
- return -ENOENT;
+ if (devices & 0x10)
+ return 1;
+ return 0;
+}
+
+/**
+ * marvell_pre_reset - check for 40/80 pin
+ * @link: link
+ * @deadline: deadline jiffies for the operation
+ *
+ * Perform the PATA port setup we need.
+ */
+
+static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (pdev->device == 0x6145 && ap->port_no == 0 &&
+ !marvell_pata_active(pdev)) /* PATA enable ? */
+ return -ENOENT;
return ata_sff_prereset(link, deadline);
}
@@ -128,6 +147,12 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
if (pdev->device == 0x6101)
ppi[1] = &ata_dummy_port_info;
+#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE)
+ if (!marvell_pata_active(pdev)) {
+ printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
+ return -ENODEV;
+ }
+#endif
return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
}
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 720b8645f58a..e970b227fbce 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -322,9 +322,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
/* Try to acquire MMIO resources and fallback to PIO if
* that fails
*/
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
if (rc)
goto use_ioports;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 13c1d2af18ac..c815f8ecf6e6 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -667,7 +667,8 @@ static const struct pci_device_id mv_pci_tbl[] = {
{ PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
{ PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
- /* RocketRAID 1740/174x have different identifiers */
+ /* RocketRAID 1720/174x have different identifiers */
+ { PCI_VDEVICE(TTI, 0x1720), chip_6042 },
{ PCI_VDEVICE(TTI, 0x1740), chip_508x },
{ PCI_VDEVICE(TTI, 0x1742), chip_508x },
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 858f70610eda..1e1f3f3757ae 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -309,8 +309,6 @@ static void nv_nf2_freeze(struct ata_port *ap);
static void nv_nf2_thaw(struct ata_port *ap);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static int nv_adma_slave_config(struct scsi_device *sdev);
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
@@ -407,7 +405,7 @@ static struct scsi_host_template nv_swncq_sht = {
static struct ata_port_operations nv_generic_ops = {
.inherits = &ata_bmdma_port_ops,
- .hardreset = nv_hardreset,
+ .hardreset = ATA_OP_NULL,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
};
@@ -1588,21 +1586,6 @@ static void nv_mcp55_thaw(struct ata_port *ap)
ata_sff_thaw(ap);
}
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- int rc;
-
- /* SATA hardreset fails to retrieve proper device signature on
- * some controllers. Request follow up SRST. For more info,
- * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
- */
- rc = sata_sff_hardreset(link, class, deadline);
- if (rc)
- return rc;
- return -EAGAIN;
-}
-
static void nv_adma_error_handler(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index db00b0591733..f1216cf6fa8f 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -423,7 +423,7 @@ int chp_new(struct chp_id chpid)
ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group);
if (ret) {
device_unregister(&chp->dev);
- goto out_free;
+ goto out;
}
mutex_lock(&channel_subsystems[chpid.cssid]->mutex);
if (channel_subsystems[chpid.cssid]->cm_enabled) {
@@ -432,14 +432,15 @@ int chp_new(struct chp_id chpid)
sysfs_remove_group(&chp->dev.kobj, &chp_attr_group);
device_unregister(&chp->dev);
mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
- goto out_free;
+ goto out;
}
}
channel_subsystems[chpid.cssid]->chps[chpid.id] = chp;
mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
- return ret;
+ goto out;
out_free:
kfree(chp);
+out:
return ret;
}
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 33bff8fec7d1..5954b905e3ca 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -208,8 +208,10 @@ cio_start_key (struct subchannel *sch, /* subchannel structure */
case 1: /* status pending */
case 2: /* busy */
return -EBUSY;
- default: /* device/path not operational */
+ case 3: /* device/path not operational */
return cio_start_handle_notoper(sch, lpm);
+ default:
+ return ccode;
}
}
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 51489eff6b0b..1261e1a9e8cd 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -633,6 +633,11 @@ channel_subsystem_release(struct device *dev)
css = to_css(dev);
mutex_destroy(&css->mutex);
+ if (css->pseudo_subchannel) {
+ /* Implies that it has been generated but never registered. */
+ css_subchannel_release(&css->pseudo_subchannel->dev);
+ css->pseudo_subchannel = NULL;
+ }
kfree(css);
}
@@ -785,11 +790,15 @@ init_channel_subsystem (void)
}
channel_subsystems[i] = css;
ret = setup_css(i);
- if (ret)
- goto out_free;
+ if (ret) {
+ kfree(channel_subsystems[i]);
+ goto out_unregister;
+ }
ret = device_register(&css->device);
- if (ret)
- goto out_free_all;
+ if (ret) {
+ put_device(&css->device);
+ goto out_unregister;
+ }
if (css_chsc_characteristics.secm) {
ret = device_create_file(&css->device,
&dev_attr_cm_enable);
@@ -802,7 +811,7 @@ init_channel_subsystem (void)
}
ret = register_reboot_notifier(&css_reboot_notifier);
if (ret)
- goto out_pseudo;
+ goto out_unregister;
css_init_done = 1;
/* Enable default isc for I/O subchannels. */
@@ -810,18 +819,12 @@ init_channel_subsystem (void)
for_each_subchannel(__init_channel_subsystem, NULL);
return 0;
-out_pseudo:
- device_unregister(&channel_subsystems[i]->pseudo_subchannel->dev);
out_file:
- device_remove_file(&channel_subsystems[i]->device,
- &dev_attr_cm_enable);
+ if (css_chsc_characteristics.secm)
+ device_remove_file(&channel_subsystems[i]->device,
+ &dev_attr_cm_enable);
out_device:
device_unregister(&channel_subsystems[i]->device);
-out_free_all:
- kfree(channel_subsystems[i]->pseudo_subchannel->lock);
- kfree(channel_subsystems[i]->pseudo_subchannel);
-out_free:
- kfree(channel_subsystems[i]);
out_unregister:
while (i > 0) {
struct channel_subsystem *css;
@@ -829,6 +832,7 @@ out_unregister:
i--;
css = channel_subsystems[i];
device_unregister(&css->pseudo_subchannel->dev);
+ css->pseudo_subchannel = NULL;
if (css_chsc_characteristics.secm)
device_remove_file(&css->device,
&dev_attr_cm_enable);
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 550508df952b..84cc9ea346db 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -658,6 +658,13 @@ ccw_device_offline(struct ccw_device *cdev)
{
struct subchannel *sch;
+ /* Allow ccw_device_offline while disconnected. */
+ if (cdev->private->state == DEV_STATE_DISCONNECTED ||
+ cdev->private->state == DEV_STATE_NOT_OPER) {
+ cdev->private->flags.donotify = 0;
+ ccw_device_done(cdev, DEV_STATE_NOT_OPER);
+ return 0;
+ }
if (ccw_device_is_orphan(cdev)) {
ccw_device_done(cdev, DEV_STATE_OFFLINE);
return 0;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 1eb64d08b60a..95b3ec89c126 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -208,7 +208,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
if (cpu_is_omap16xx())
ocpi_enable();
-#ifdef CONFIG_ARCH_OMAP_OTG
+#ifdef CONFIG_USB_OTG
if (need_transceiver) {
ohci->transceiver = otg_get_transceiver();
if (ohci->transceiver) {
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 7b74238ad1c7..e980766bb84b 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -161,7 +161,7 @@ static int usb_console_setup(struct console *co, char *options)
if (serial->type->set_termios) {
termios->c_cflag = cflag;
tty_termios_encode_baud_rate(termios, baud, baud);
- serial->type->set_termios(NULL, port, &dummy);
+ serial->type->set_termios(tty, port, &dummy);
port->port.tty = NULL;
kfree(termios);
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index d4427cb86979..2e15da5459cf 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -60,7 +60,7 @@
#define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10))
-#define BALLOON_CLASS_NAME "memory"
+#define BALLOON_CLASS_NAME "xen_memory"
struct balloon_stats {
/* We aim for 'current allocation' == 'target allocation'. */
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 20:56:11 +0100