summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/char/viotape.c2
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c6
-rw-r--r--drivers/macintosh/therm_adt746x.c4
-rw-r--r--drivers/net/ucc_geth.c24
-rw-r--r--drivers/net/ucc_geth.h4
-rw-r--r--drivers/of/base.c1
-rw-r--r--drivers/pci/Makefile1
-rw-r--r--drivers/rapidio/rio-scan.c6
-rw-r--r--drivers/regulator/Kconfig26
-rw-r--r--drivers/regulator/Makefile3
-rw-r--r--drivers/regulator/da903x.c2
-rw-r--r--drivers/regulator/fixed.c18
-rw-r--r--drivers/regulator/lp3971.c562
-rw-r--r--drivers/regulator/max1586.c282
-rw-r--r--drivers/regulator/pcf50633-regulator.c2
-rw-r--r--drivers/regulator/userspace-consumer.c200
-rw-r--r--drivers/regulator/virtual.c1
-rw-r--r--drivers/regulator/wm8350-regulator.c1
-rw-r--r--drivers/regulator/wm8400-regulator.c8
-rw-r--r--drivers/video/xilinxfb.c290
20 files changed, 1281 insertions, 162 deletions
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index ffc9254f7e02..042c8149a6d1 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -867,7 +867,7 @@ static int viotape_probe(struct vio_dev *vdev, const struct vio_device_id *id)
int j;
struct device_node *node = vdev->dev.archdata.of_node;
- if (i > VIOTAPE_MAX_TAPE)
+ if (i >= VIOTAPE_MAX_TAPE)
return -ENODEV;
if (!node)
return -ENODEV;
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 8b92a4666e02..e4476743f203 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -756,12 +756,12 @@ static int __devinit iic_probe(struct of_device *ofdev,
goto error_cleanup;
}
- /* Now register all the child nodes */
- of_register_i2c_devices(adap, np);
-
dev_info(&ofdev->dev, "using %s mode\n",
dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
+ /* Now register all the child nodes */
+ of_register_i2c_devices(adap, np);
+
return 0;
error_cleanup:
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index c0621d50c8a0..0ddf9044948a 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -37,6 +37,7 @@
#define CONFIG_REG 0x40
#define MANUAL_MASK 0xe0
#define AUTO_MASK 0x20
+#define INVERT_MASK 0x10
static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */
static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */
@@ -229,7 +230,8 @@ static void write_fan_speed(struct thermostat *th, int speed, int fan)
if (speed >= 0) {
manual = read_reg(th, MANUAL_MODE[fan]);
- write_reg(th, MANUAL_MODE[fan], manual|MANUAL_MASK);
+ write_reg(th, MANUAL_MODE[fan],
+ (manual|MANUAL_MASK) & (~INVERT_MASK));
write_reg(th, FAN_SPD_SET[fan], speed);
} else {
/* back to automatic */
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index fd6140bd9aae..e2f2e91cfdd2 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -273,7 +273,7 @@ static int fill_init_enet_entries(struct ucc_geth_private *ugeth,
u8 num_entries,
u32 thread_size,
u32 thread_alignment,
- enum qe_risc_allocation risc,
+ unsigned int risc,
int skip_page_for_first_entry)
{
u32 init_enet_offset;
@@ -310,7 +310,7 @@ static int fill_init_enet_entries(struct ucc_geth_private *ugeth,
static int return_init_enet_entries(struct ucc_geth_private *ugeth,
u32 *p_start,
u8 num_entries,
- enum qe_risc_allocation risc,
+ unsigned int risc,
int skip_page_for_first_entry)
{
u32 init_enet_offset;
@@ -345,7 +345,7 @@ static int dump_init_enet_entries(struct ucc_geth_private *ugeth,
u32 __iomem *p_start,
u8 num_entries,
u32 thread_size,
- enum qe_risc_allocation risc,
+ unsigned int risc,
int skip_page_for_first_entry)
{
u32 init_enet_offset;
@@ -2180,6 +2180,14 @@ static int ucc_struct_init(struct ucc_geth_private *ugeth)
return -ENOMEM;
}
+ /* read the number of risc engines, update the riscTx and riscRx
+ * if there are 4 riscs in QE
+ */
+ if (qe_get_num_of_risc() == 4) {
+ ug_info->riscTx = QE_RISC_ALLOCATION_FOUR_RISCS;
+ ug_info->riscRx = QE_RISC_ALLOCATION_FOUR_RISCS;
+ }
+
ugeth->ug_regs = ioremap(uf_info->regs, sizeof(*ugeth->ug_regs));
if (!ugeth->ug_regs) {
if (netif_msg_probe(ugeth))
@@ -3744,7 +3752,15 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ug_info->uf_info.utfet = UCC_GETH_UTFET_GIGA_INIT;
ug_info->uf_info.utftt = UCC_GETH_UTFTT_GIGA_INIT;
ug_info->numThreadsTx = UCC_GETH_NUM_OF_THREADS_4;
- ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
+
+ /* If QE's snum number is 46 which means we need to support
+ * 4 UECs at 1000Base-T simultaneously, we need to allocate
+ * more Threads to Rx.
+ */
+ if (qe_get_num_of_snums() == 46)
+ ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_6;
+ else
+ ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
}
if (netif_msg_probe(&debug))
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index deb962bb68ef..5beba4c14532 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1144,8 +1144,8 @@ struct ucc_geth_info {
enum ucc_geth_maccfg2_pad_and_crc_mode padAndCrc;
enum ucc_geth_num_of_threads numThreadsTx;
enum ucc_geth_num_of_threads numThreadsRx;
- enum qe_risc_allocation riscTx;
- enum qe_risc_allocation riscRx;
+ unsigned int riscTx;
+ unsigned int riscRx;
};
/* structure representing UCC GETH */
diff --git a/drivers/of/base.c b/drivers/of/base.c
index ddf224d456b2..69f85c07d17f 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -447,6 +447,7 @@ struct of_modalias_table {
static struct of_modalias_table of_modalias_table[] = {
{ "fsl,mcu-mpc8349emitx", "mcu-mpc8349emitx" },
{ "mmc-spi-slot", "mmc_spi" },
+ { "stm,m25p40", "m25p80" },
};
/**
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index ba6af162fd39..b77ae6794275 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -39,7 +39,6 @@ obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o
obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o
obj-$(CONFIG_PARISC) += setup-bus.o
obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
-obj-$(CONFIG_PPC32) += setup-irq.o
obj-$(CONFIG_PPC) += setup-bus.o
obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
obj-$(CONFIG_X86_VISWS) += setup-irq.o
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 74d0bfa3f310..3b78540288c7 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -290,7 +290,7 @@ static void __devinit rio_add_device(struct rio_dev *rdev)
* to a RIO device on success or NULL on failure.
*
*/
-static struct rio_dev *rio_setup_device(struct rio_net *net,
+static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
struct rio_mport *port, u16 destid,
u8 hopcount, int do_enum)
{
@@ -559,7 +559,7 @@ static void rio_net_add_mport(struct rio_net *net, struct rio_mport *port)
* Recursively enumerates a RIO network. Transactions are sent via the
* master port passed in @port.
*/
-static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
+static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
u8 hopcount)
{
int port_num;
@@ -718,7 +718,7 @@ static int rio_enum_complete(struct rio_mport *port)
* Recursively discovers a RIO network. Transactions are sent via the
* master port passed in @port.
*/
-static int
+static int __devinit
rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
u8 hopcount)
{
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index e58c0ce65aa6..f4317798e47c 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -47,6 +47,16 @@ config REGULATOR_VIRTUAL_CONSUMER
If unsure, say no.
+config REGULATOR_USERSPACE_CONSUMER
+ tristate "Userspace regulator consumer support"
+ default n
+ help
+ There are some classes of devices that are controlled entirely
+ from user space. Usersapce consumer driver provides ability to
+ control power supplies for such devices.
+
+ If unsure, say no.
+
config REGULATOR_BQ24022
tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
default n
@@ -56,6 +66,15 @@ config REGULATOR_BQ24022
charging select between 100 mA and 500 mA charging current
limit.
+config REGULATOR_MAX1586
+ tristate "Maxim 1586/1587 voltage regulator"
+ depends on I2C
+ default n
+ help
+ This driver controls a Maxim 1586 or 1587 voltage output
+ regulator via I2C bus. The provided regulator is suitable
+ for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
+
config REGULATOR_TWL4030
bool "TI TWL4030/TWL5030/TPS695x0 PMIC"
depends on TWL4030_CORE
@@ -91,4 +110,11 @@ config REGULATOR_PCF50633
Say Y here to support the voltage regulators and convertors
on PCF50633
+config REGULATOR_LP3971
+ tristate "National Semiconductors LP3971 PMIC regulator driver"
+ depends on I2C
+ help
+ Say Y here to support the voltage regulators and convertors
+ on National Semiconductors LP3971 PMIC
+
endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bac133afc061..4d762c4cccfd 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -6,8 +6,11 @@
obj-$(CONFIG_REGULATOR) += core.o
obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
+obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
+obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
+obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index c6628f5a0af7..b8b89ef10a84 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -504,7 +504,7 @@ static int __init da903x_regulator_init(void)
{
return platform_driver_register(&da903x_regulator_driver);
}
-module_init(da903x_regulator_init);
+subsys_initcall(da903x_regulator_init);
static void __exit da903x_regulator_exit(void)
{
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 23d554628a76..cdc674fb46c3 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -44,10 +44,22 @@ static int fixed_voltage_get_voltage(struct regulator_dev *dev)
return data->microvolts;
}
+static int fixed_voltage_list_voltage(struct regulator_dev *dev,
+ unsigned selector)
+{
+ struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+ if (selector != 0)
+ return -EINVAL;
+
+ return data->microvolts;
+}
+
static struct regulator_ops fixed_voltage_ops = {
.is_enabled = fixed_voltage_is_enabled,
.enable = fixed_voltage_enable,
.get_voltage = fixed_voltage_get_voltage,
+ .list_voltage = fixed_voltage_list_voltage,
};
static int regulator_fixed_voltage_probe(struct platform_device *pdev)
@@ -69,7 +81,8 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev)
}
drvdata->desc.type = REGULATOR_VOLTAGE;
drvdata->desc.owner = THIS_MODULE;
- drvdata->desc.ops = &fixed_voltage_ops,
+ drvdata->desc.ops = &fixed_voltage_ops;
+ drvdata->desc.n_voltages = 1;
drvdata->microvolts = config->microvolts;
@@ -117,7 +130,7 @@ static int __init regulator_fixed_voltage_init(void)
{
return platform_driver_register(&regulator_fixed_voltage_driver);
}
-module_init(regulator_fixed_voltage_init);
+subsys_initcall(regulator_fixed_voltage_init);
static void __exit regulator_fixed_voltage_exit(void)
{
@@ -128,3 +141,4 @@ module_exit(regulator_fixed_voltage_exit);
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("Fixed voltage regulator");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:reg-fixed-voltage");
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
new file mode 100644
index 000000000000..a61018a27698
--- /dev/null
+++ b/drivers/regulator/lp3971.c
@@ -0,0 +1,562 @@
+/*
+ * Regulator driver for National Semiconductors LP3971 PMIC chip
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Based on wm8350.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/lp3971.h>
+
+struct lp3971 {
+ struct device *dev;
+ struct mutex io_lock;
+ struct i2c_client *i2c;
+ int num_regulators;
+ struct regulator_dev **rdev;
+};
+
+static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg);
+static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val);
+
+#define LP3971_SYS_CONTROL1_REG 0x07
+
+/* System control register 1 initial value,
+ bits 4 and 5 are EPROM programmable */
+#define SYS_CONTROL1_INIT_VAL 0x40
+#define SYS_CONTROL1_INIT_MASK 0xCF
+
+#define LP3971_BUCK_VOL_ENABLE_REG 0x10
+#define LP3971_BUCK_VOL_CHANGE_REG 0x20
+
+/* Voltage control registers shift:
+ LP3971_BUCK1 -> 0
+ LP3971_BUCK2 -> 4
+ LP3971_BUCK3 -> 6
+*/
+#define BUCK_VOL_CHANGE_SHIFT(x) (((1 << x) & ~0x01) << 1)
+#define BUCK_VOL_CHANGE_FLAG_GO 0x01
+#define BUCK_VOL_CHANGE_FLAG_TARGET 0x02
+#define BUCK_VOL_CHANGE_FLAG_MASK 0x03
+
+#define LP3971_BUCK1_BASE 0x23
+#define LP3971_BUCK2_BASE 0x29
+#define LP3971_BUCK3_BASE 0x32
+
+const static int buck_base_addr[] = {
+ LP3971_BUCK1_BASE,
+ LP3971_BUCK2_BASE,
+ LP3971_BUCK3_BASE,
+};
+
+#define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x])
+#define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1)
+
+const static int buck_voltage_map[] = {
+ 0, 800, 850, 900, 950, 1000, 1050, 1100,
+ 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
+ 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
+ 3000, 3300,
+};
+
+#define BUCK_TARGET_VOL_MASK 0x3f
+#define BUCK_TARGET_VOL_MIN_IDX 0x01
+#define BUCK_TARGET_VOL_MAX_IDX 0x19
+
+#define LP3971_BUCK_RAMP_REG(x) (buck_base_addr[x]+2)
+
+#define LP3971_LDO_ENABLE_REG 0x12
+#define LP3971_LDO_VOL_CONTR_BASE 0x39
+
+/* Voltage control registers:
+ LP3971_LDO1 -> LP3971_LDO_VOL_CONTR_BASE + 0
+ LP3971_LDO2 -> LP3971_LDO_VOL_CONTR_BASE + 0
+ LP3971_LDO3 -> LP3971_LDO_VOL_CONTR_BASE + 1
+ LP3971_LDO4 -> LP3971_LDO_VOL_CONTR_BASE + 1
+ LP3971_LDO5 -> LP3971_LDO_VOL_CONTR_BASE + 2
+*/
+#define LP3971_LDO_VOL_CONTR_REG(x) (LP3971_LDO_VOL_CONTR_BASE + (x >> 1))
+
+/* Voltage control registers shift:
+ LP3971_LDO1 -> 0, LP3971_LDO2 -> 4
+ LP3971_LDO3 -> 0, LP3971_LDO4 -> 4
+ LP3971_LDO5 -> 0
+*/
+#define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2)
+#define LDO_VOL_CONTR_MASK 0x0f
+
+const static int ldo45_voltage_map[] = {
+ 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
+ 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
+};
+
+const static int ldo123_voltage_map[] = {
+ 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
+ 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
+};
+
+const static int *ldo_voltage_map[] = {
+ ldo123_voltage_map, /* LDO1 */
+ ldo123_voltage_map, /* LDO2 */
+ ldo123_voltage_map, /* LDO3 */
+ ldo45_voltage_map, /* LDO4 */
+ ldo45_voltage_map, /* LDO5 */
+};
+
+#define LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[(x - LP3971_LDO1)])
+
+#define LDO_VOL_MIN_IDX 0x00
+#define LDO_VOL_MAX_IDX 0x0f
+
+static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
+{
+ int ldo = rdev_get_id(dev) - LP3971_LDO1;
+ return 1000 * LDO_VOL_VALUE_MAP(ldo)[index];
+}
+
+static int lp3971_ldo_is_enabled(struct regulator_dev *dev)
+{
+ struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+ int ldo = rdev_get_id(dev) - LP3971_LDO1;
+ u16 mask = 1 << (1 + ldo);
+ u16 val;
+
+ val = lp3971_reg_read(lp3971, LP3971_LDO_ENABLE_REG);
+ return (val & mask) != 0;
+}
+
+static int lp3971_ldo_enable(struct regulator_dev *dev)
+{
+ struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+ int ldo = rdev_get_id(dev) - LP3971_LDO1;
+ u16 mask = 1 << (1 + ldo);
+
+ return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, mask);
+}
+
+static int lp3971_ldo_disable(struct regulator_dev *dev)
+{
+ struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+ int ldo = rdev_get_id(dev) - LP3971_LDO1;
+ u16 mask = 1 << (1 + ldo);
+
+ return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0);
+}
+
+static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
+{
+ struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+ int ldo = rdev_get_id(dev) - LP3971_LDO1;
+ u16 val, reg;
+
+ reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
+ val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
+
+ return 1000 * LDO_VOL_VALUE_MAP(ldo)[val];
+}
+
+static int lp3971_ldo_set_voltage(struct regulator_dev *dev,
+ int min_uV, int max_uV)
+{
+ struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+ int ldo = rdev_get_id(dev) - LP3971_LDO1;
+ int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
+ const int *vol_map = LDO_VOL_VALUE_MAP(ldo);
+ u16 val;
+
+ if (min_vol < vol_map[LDO_VOL_MIN_IDX] ||
+ min_vol > vol_map[LDO_VOL_MAX_IDX])
+ return -EINVAL;
+
+ for (val = LDO_VOL_MIN_IDX; val <= LDO_VOL_MAX_IDX; val++)
+ if (vol_map[val] >= min_vol)
+ break;
+
+ if (vol_map[val] > max_vol)
+ return -EINVAL;
+
+ return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo),
+ LDO_VOL_CONTR_MASK << LDO_VOL_CONTR_SHIFT(ldo), val);
+}
+
+static struct regulator_ops lp3971_ldo_ops = {
+ .list_voltage = lp3971_ldo_list_voltage,
+ .is_enabled = lp3971_ldo_is_enabled,
+ .enable = lp3971_ldo_enable,
+ .disable = lp3971_ldo_disable,
+ .get_voltage = lp3971_ldo_get_voltage,
+ .set_voltage = lp3971_ldo_set_voltage,
+};
+
+static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
+{
+ return 1000 * buck_voltage_map[index];
+}
+
+static int lp3971_dcdc_is_enabled(struct regulator_dev *dev)
+{
+ struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+ int buck = rdev_get_id(dev) - LP3971_DCDC1;
+ u16 mask = 1 << (buck * 2);
+ u16 val;
+
+ val = lp3971_reg_read(lp3971, LP3971_BUCK_VOL_ENABLE_REG);
+ return (val & mask) != 0;
+}
+
+static int lp3971_dcdc_enable(struct regulator_dev *dev)
+{
+ struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+ int buck = rdev_get_id(dev) - LP3971_DCDC1;
+ u16 mask = 1 << (buck * 2);
+
+ return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, mask);
+}
+
+static int lp3971_dcdc_disable(struct regulator_dev *dev)
+{
+ struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+ int buck = rdev_get_id(dev) - LP3971_DCDC1;
+ u16 mask = 1 << (buck * 2);
+
+ return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0);
+}
+
+static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
+{
+ struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+ int buck = rdev_get_id(dev) - LP3971_DCDC1;
+ u16 reg;
+ int val;
+
+ reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck));
+ reg &= BUCK_TARGET_VOL_MASK;
+
+ if (reg <= BUCK_TARGET_VOL_MAX_IDX)
+ val = 1000 * buck_voltage_map[reg];
+ else {
+ val = 0;
+ dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
+ }
+
+ return val;
+}
+
+static int lp3971_dcdc_set_voltage(struct regulator_dev *dev,
+ int min_uV, int max_uV)
+{
+ struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+ int buck = rdev_get_id(dev) - LP3971_DCDC1;
+ int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
+ const int *vol_map = buck_voltage_map;
+ u16 val;
+ int ret;
+
+ if (min_vol < vol_map[BUCK_TARGET_VOL_MIN_IDX] ||
+ min_vol > vol_map[BUCK_TARGET_VOL_MAX_IDX])
+ return -EINVAL;
+
+ for (val = BUCK_TARGET_VOL_MIN_IDX; val <= BUCK_TARGET_VOL_MAX_IDX;
+ val++)
+ if (vol_map[val] >= min_vol)
+ break;
+
+ if (vol_map[val] > max_vol)
+ return -EINVAL;
+
+ ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck),
+ BUCK_TARGET_VOL_MASK, val);
+ if (ret)
+ return ret;
+
+ ret = lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG,
+ BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck),
+ BUCK_VOL_CHANGE_FLAG_GO << BUCK_VOL_CHANGE_SHIFT(buck));
+ if (ret)
+ return ret;
+
+ return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG,
+ BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck),
+ 0 << BUCK_VOL_CHANGE_SHIFT(buck));
+}
+
+static struct regulator_ops lp3971_dcdc_ops = {
+ .list_voltage = lp3971_dcdc_list_voltage,
+ .is_enabled = lp3971_dcdc_is_enabled,
+ .enable = lp3971_dcdc_enable,
+ .disable = lp3971_dcdc_disable,
+ .get_voltage = lp3971_dcdc_get_voltage,
+ .set_voltage = lp3971_dcdc_set_voltage,
+};
+
+static struct regulator_desc regulators[] = {
+ {
+ .name = "LDO1",
+ .id = LP3971_LDO1,
+ .ops = &lp3971_ldo_ops,
+ .n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "LDO2",
+ .id = LP3971_LDO2,
+ .ops = &lp3971_ldo_ops,
+ .n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "LDO3",
+ .id = LP3971_LDO3,
+ .ops = &lp3971_ldo_ops,
+ .n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "LDO4",
+ .id = LP3971_LDO4,
+ .ops = &lp3971_ldo_ops,
+ .n_voltages = ARRAY_SIZE(ldo45_voltage_map),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "LDO5",
+ .id = LP3971_LDO5,
+ .ops = &lp3971_ldo_ops,
+ .n_voltages = ARRAY_SIZE(ldo45_voltage_map),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "DCDC1",
+ .id = LP3971_DCDC1,
+ .ops = &lp3971_dcdc_ops,
+ .n_voltages = ARRAY_SIZE(buck_voltage_map),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "DCDC2",
+ .id = LP3971_DCDC2,
+ .ops = &lp3971_dcdc_ops,
+ .n_voltages = ARRAY_SIZE(buck_voltage_map),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "DCDC3",
+ .id = LP3971_DCDC3,
+ .ops = &lp3971_dcdc_ops,
+ .n_voltages = ARRAY_SIZE(buck_voltage_map),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count,
+ u16 *dest)
+{
+ int ret;
+
+ if (count != 1)
+ return -EIO;
+ ret = i2c_smbus_read_byte_data(i2c, reg);
+ if (ret < 0 || count != 1)
+ return -EIO;
+
+ *dest = ret;
+ return 0;
+}
+
+static int lp3971_i2c_write(struct i2c_client *i2c, char reg, int count,
+ const u16 *src)
+{
+ int ret;
+
+ if (count != 1)
+ return -EIO;
+ ret = i2c_smbus_write_byte_data(i2c, reg, *src);
+ if (ret >= 0)
+ return 0;
+
+ return ret;
+}
+
+static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg)
+{
+ u16 val = 0;
+
+ mutex_lock(&lp3971->io_lock);
+
+ lp3971_i2c_read(lp3971->i2c, reg, 1, &val);
+
+ dev_dbg(lp3971->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg,
+ (unsigned)val&0xff);
+
+ mutex_unlock(&lp3971->io_lock);
+
+ return val & 0xff;
+}
+
+static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val)
+{
+ u16 tmp;
+ int ret;
+
+ mutex_lock(&lp3971->io_lock);
+
+ ret = lp3971_i2c_read(lp3971->i2c, reg, 1, &tmp);
+ tmp = (tmp & ~mask) | val;
+ if (ret == 0) {
+ ret = lp3971_i2c_write(lp3971->i2c, reg, 1, &tmp);
+ dev_dbg(lp3971->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg,
+ (unsigned)val&0xff);
+ }
+ mutex_unlock(&lp3971->io_lock);
+
+ return ret;
+}
+
+static int setup_regulators(struct lp3971 *lp3971,
+ struct lp3971_platform_data *pdata)
+{
+ int i, err;
+ int num_regulators = pdata->num_regulators;
+ lp3971->num_regulators = num_regulators;
+ lp3971->rdev = kzalloc(sizeof(struct regulator_dev *) * num_regulators,
+ GFP_KERNEL);
+
+ /* Instantiate the regulators */
+ for (i = 0; i < num_regulators; i++) {
+ int id = pdata->regulators[i].id;
+ lp3971->rdev[i] = regulator_register(&regulators[id],
+ lp3971->dev, pdata->regulators[i].initdata, lp3971);
+
+ err = IS_ERR(lp3971->rdev[i]);
+ if (err) {
+ dev_err(lp3971->dev, "regulator init failed: %d\n",
+ err);
+ goto error;
+ }
+ }
+
+ return 0;
+error:
+ for (i = 0; i < num_regulators; i++)
+ if (lp3971->rdev[i])
+ regulator_unregister(lp3971->rdev[i]);
+ kfree(lp3971->rdev);
+ lp3971->rdev = NULL;
+ return err;
+}
+
+static int __devinit lp3971_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct lp3971 *lp3971;
+ struct lp3971_platform_data *pdata = i2c->dev.platform_data;
+ int ret;
+ u16 val;
+
+ lp3971 = kzalloc(sizeof(struct lp3971), GFP_KERNEL);
+ if (lp3971 == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ lp3971->i2c = i2c;
+ lp3971->dev = &i2c->dev;
+ i2c_set_clientdata(i2c, lp3971);
+
+ mutex_init(&lp3971->io_lock);
+
+ /* Detect LP3971 */
+ ret = lp3971_i2c_read(i2c, LP3971_SYS_CONTROL1_REG, 1, &val);
+ if (ret == 0 && (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL)
+ ret = -ENODEV;
+ if (ret < 0) {
+ dev_err(&i2c->dev, "failed to detect device\n");
+ goto err_detect;
+ }
+
+ if (pdata) {
+ ret = setup_regulators(lp3971, pdata);
+ if (ret < 0)
+ goto err_detect;
+ } else
+ dev_warn(lp3971->dev, "No platform init data supplied\n");
+
+ return 0;
+
+err_detect:
+ i2c_set_clientdata(i2c, NULL);
+ kfree(lp3971);
+err:
+ return ret;
+}
+
+static int __devexit lp3971_i2c_remove(struct i2c_client *i2c)
+{
+ struct lp3971 *lp3971 = i2c_get_clientdata(i2c);
+ int i;
+ for (i = 0; i < lp3971->num_regulators; i++)
+ if (lp3971->rdev[i])
+ regulator_unregister(lp3971->rdev[i]);
+ kfree(lp3971->rdev);
+ i2c_set_clientdata(i2c, NULL);
+ kfree(lp3971);
+
+ return 0;
+}
+
+static const struct i2c_device_id lp3971_i2c_id[] = {
+ { "lp3971", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lp3971_i2c_id);
+
+static struct i2c_driver lp3971_i2c_driver = {
+ .driver = {
+ .name = "LP3971",
+ .owner = THIS_MODULE,
+ },
+ .probe = lp3971_i2c_probe,
+ .remove = __devexit_p(lp3971_i2c_remove),
+ .id_table = lp3971_i2c_id,
+};
+
+static int __init lp3971_module_init(void)
+{
+ int ret = -ENODEV;
+
+ ret = i2c_add_driver(&lp3971_i2c_driver);
+ if (ret != 0)
+ pr_err("Failed to register I2C driver: %d\n", ret);
+
+ return ret;
+}
+module_init(lp3971_module_init);
+
+static void __exit lp3971_module_exit(void)
+{
+ i2c_del_driver(&lp3971_i2c_driver);
+}
+module_exit(lp3971_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marek Szyprowski <m.szyprowski@samsung.com>");
+MODULE_DESCRIPTION("LP3971 PMIC driver");
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
new file mode 100644
index 000000000000..2c082d3ef484
--- /dev/null
+++ b/drivers/regulator/max1586.c
@@ -0,0 +1,282 @@
+/*
+ * max1586.c -- Voltage and current regulation for the Maxim 1586
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/max1586.h>
+
+#define MAX1586_V3_MAX_VSEL 31
+#define MAX1586_V6_MAX_VSEL 3
+
+#define MAX1586_V3_MIN_UV 700000
+#define MAX1586_V3_MAX_UV 1475000
+
+#define MAX1586_V6_MIN_UV 0
+#define MAX1586_V6_MAX_UV 3000000
+
+#define I2C_V3_SELECT (0 << 5)
+#define I2C_V6_SELECT (1 << 5)
+
+struct max1586_data {
+ struct i2c_client *client;
+
+ /* min/max V3 voltage */
+ unsigned int min_uV;
+ unsigned int max_uV;
+
+ struct regulator_dev *rdev[0];
+};
+
+/*
+ * V3 voltage
+ * On I2C bus, sending a "x" byte to the max1586 means :
+ * set V3 to 0.700V + (x & 0x1f) * 0.025V
+ * This voltage can be increased by external resistors
+ * R24 and R25=100kOhm as described in the data sheet.
+ * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
+ */
+static int max1586_v3_calc_voltage(struct max1586_data *max1586,
+ unsigned selector)
+{
+ unsigned range_uV = max1586->max_uV - max1586->min_uV;
+
+ return max1586->min_uV + (selector * range_uV / MAX1586_V3_MAX_VSEL);
+}
+
+static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV)
+{
+ struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+ struct i2c_client *client = max1586->client;
+ unsigned range_uV = max1586->max_uV - max1586->min_uV;
+ unsigned selector;
+ u8 v3_prog;
+
+ if (min_uV > max1586->max_uV || max_uV < max1586->min_uV)
+ return -EINVAL;
+ if (min_uV < max1586->min_uV)
+ min_uV = max1586->min_uV;
+
+ selector = ((min_uV - max1586->min_uV) * MAX1586_V3_MAX_VSEL +
+ range_uV - 1) / range_uV;
+ if (max1586_v3_calc_voltage(max1586, selector) > max_uV)
+ return -EINVAL;
+
+ dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
+ max1586_v3_calc_voltage(max1586, selector) / 1000);
+
+ v3_prog = I2C_V3_SELECT | (u8) selector;
+ return i2c_smbus_write_byte(client, v3_prog);
+}
+
+static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector)
+{
+ struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+
+ if (selector > MAX1586_V3_MAX_VSEL)
+ return -EINVAL;
+ return max1586_v3_calc_voltage(max1586, selector);
+}
+
+/*
+ * V6 voltage
+ * On I2C bus, sending a "x" byte to the max1586 means :
+ * set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
+ * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
+ */
+static int max1586_v6_calc_voltage(unsigned selector)
+{
+ static int voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
+
+ return voltages_uv[selector];
+}
+
+static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV)
+{
+ struct i2c_client *client = rdev_get_drvdata(rdev);
+ unsigned selector;
+ u8 v6_prog;
+
+ if (min_uV < MAX1586_V6_MIN_UV || min_uV > MAX1586_V6_MAX_UV)
+ return -EINVAL;
+ if (max_uV < MAX1586_V6_MIN_UV || max_uV > MAX1586_V6_MAX_UV)
+ return -EINVAL;
+
+ if (min_uV >= 3000000)
+ selector = 3;
+ if (min_uV < 3000000)
+ selector = 2;
+ if (min_uV < 2500000)
+ selector = 1;
+ if (min_uV < 1800000)
+ selector = 0;
+
+ if (max1586_v6_calc_voltage(selector) > max_uV)
+ return -EINVAL;
+
+ dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
+ max1586_v6_calc_voltage(selector) / 1000);
+
+ v6_prog = I2C_V6_SELECT | (u8) selector;
+ return i2c_smbus_write_byte(client, v6_prog);
+}
+
+static int max1586_v6_list(struct regulator_dev *rdev, unsigned selector)
+{
+ if (selector > MAX1586_V6_MAX_VSEL)
+ return -EINVAL;
+ return max1586_v6_calc_voltage(selector);
+}
+
+/*
+ * The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
+ * the set up value.
+ */
+static struct regulator_ops max1586_v3_ops = {
+ .set_voltage = max1586_v3_set,
+ .list_voltage = max1586_v3_list,
+};
+
+static struct regulator_ops max1586_v6_ops = {
+ .set_voltage = max1586_v6_set,
+ .list_voltage = max1586_v6_list,
+};
+
+static struct regulator_desc max1586_reg[] = {
+ {
+ .name = "Output_V3",
+ .id = MAX1586_V3,
+ .ops = &max1586_v3_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = MAX1586_V3_MAX_VSEL + 1,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "Output_V6",
+ .id = MAX1586_V6,
+ .ops = &max1586_v6_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = MAX1586_V6_MAX_VSEL + 1,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int max1586_pmic_probe(struct i2c_client *client,
+ const struct i2c_device_id *i2c_id)
+{
+ struct regulator_dev **rdev;
+ struct max1586_platform_data *pdata = client->dev.platform_data;
+ struct max1586_data *max1586;
+ int i, id, ret = -ENOMEM;
+
+ max1586 = kzalloc(sizeof(struct max1586_data) +
+ sizeof(struct regulator_dev *) * (MAX1586_V6 + 1),
+ GFP_KERNEL);
+ if (!max1586)
+ goto out;
+
+ max1586->client = client;
+
+ if (!pdata->v3_gain) {
+ ret = -EINVAL;
+ goto out_unmap;
+ }
+ max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000;
+ max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000;
+
+ rdev = max1586->rdev;
+ for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
+ id = pdata->subdevs[i].id;
+ if (!pdata->subdevs[i].platform_data)
+ continue;
+ if (id < MAX1586_V3 || id > MAX1586_V6) {
+ dev_err(&client->dev, "invalid regulator id %d\n", id);
+ goto err;
+ }
+ rdev[i] = regulator_register(&max1586_reg[id], &client->dev,
+ pdata->subdevs[i].platform_data,
+ max1586);
+ if (IS_ERR(rdev[i])) {
+ ret = PTR_ERR(rdev[i]);
+ dev_err(&client->dev, "failed to register %s\n",
+ max1586_reg[id].name);
+ goto err;
+ }
+ }
+
+ i2c_set_clientdata(client, rdev);
+ dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n");
+ return 0;
+
+err:
+ while (--i >= 0)
+ regulator_unregister(rdev[i]);
+out_unmap:
+ kfree(max1586);
+out:
+ return ret;
+}
+
+static int max1586_pmic_remove(struct i2c_client *client)
+{
+ struct regulator_dev **rdev = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i <= MAX1586_V6; i++)
+ if (rdev[i])
+ regulator_unregister(rdev[i]);
+ kfree(rdev);
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+static const struct i2c_device_id max1586_id[] = {
+ { "max1586", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max1586_id);
+
+static struct i2c_driver max1586_pmic_driver = {
+ .probe = max1586_pmic_probe,
+ .remove = max1586_pmic_remove,
+ .driver = {
+ .name = "max1586",
+ },
+ .id_table = max1586_id,
+};
+
+static int __init max1586_pmic_init(void)
+{
+ return i2c_add_driver(&max1586_pmic_driver);
+}
+subsys_initcall(max1586_pmic_init);
+
+static void __exit max1586_pmic_exit(void)
+{
+ i2c_del_driver(&max1586_pmic_driver);
+}
+module_exit(max1586_pmic_exit);
+
+/* Module information */
+MODULE_DESCRIPTION("MAXIM 1586 voltage regulator driver");
+MODULE_AUTHOR("Robert Jarzmik");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
index cd761d85c8fd..8e14900eb686 100644
--- a/drivers/regulator/pcf50633-regulator.c
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -316,7 +316,7 @@ static int __init pcf50633_regulator_init(void)
{
return platform_driver_register(&pcf50633_regulator_driver);
}
-module_init(pcf50633_regulator_init);
+subsys_initcall(pcf50633_regulator_init);
static void __exit pcf50633_regulator_exit(void)
{
diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c
new file mode 100644
index 000000000000..06d2fa96a8b4
--- /dev/null
+++ b/drivers/regulator/userspace-consumer.c
@@ -0,0 +1,200 @@
+/*
+ * userspace-consumer.c
+ *
+ * Copyright 2009 CompuLab, Ltd.
+ *
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based of virtual consumer driver:
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/userspace-consumer.h>
+
+struct userspace_consumer_data {
+ const char *name;
+
+ struct mutex lock;
+ bool enabled;
+
+ int num_supplies;
+ struct regulator_bulk_data *supplies;
+};
+
+static ssize_t reg_show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct userspace_consumer_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", data->name);
+}
+
+static ssize_t reg_show_state(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct userspace_consumer_data *data = dev_get_drvdata(dev);
+
+ if (data->enabled)
+ return sprintf(buf, "enabled\n");
+
+ return sprintf(buf, "disabled\n");
+}
+
+static ssize_t reg_set_state(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct userspace_consumer_data *data = dev_get_drvdata(dev);
+ bool enabled;
+ int ret;
+
+ /*
+ * sysfs_streq() doesn't need the \n's, but we add them so the strings
+ * will be shared with show_state(), above.
+ */
+ if (sysfs_streq(buf, "enabled\n") || sysfs_streq(buf, "1"))
+ enabled = true;
+ else if (sysfs_streq(buf, "disabled\n") || sysfs_streq(buf, "0"))
+ enabled = false;
+ else {
+ dev_err(dev, "Configuring invalid mode\n");
+ return count;
+ }
+
+ mutex_lock(&data->lock);
+ if (enabled != data->enabled) {
+ if (enabled)
+ ret = regulator_bulk_enable(data->num_supplies,
+ data->supplies);
+ else
+ ret = regulator_bulk_disable(data->num_supplies,
+ data->supplies);
+
+ if (ret == 0)
+ data->enabled = enabled;
+ else
+ dev_err(dev, "Failed to configure state: %d\n", ret);
+ }
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static DEVICE_ATTR(name, 0444, reg_show_name, NULL);
+static DEVICE_ATTR(state, 0644, reg_show_state, reg_set_state);
+
+static struct device_attribute *attributes[] = {
+ &dev_attr_name,
+ &dev_attr_state,
+};
+
+static int regulator_userspace_consumer_probe(struct platform_device *pdev)
+{
+ struct regulator_userspace_consumer_data *pdata;
+ struct userspace_consumer_data *drvdata;
+ int ret, i;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -EINVAL;
+
+ drvdata = kzalloc(sizeof(struct userspace_consumer_data), GFP_KERNEL);
+ if (drvdata == NULL)
+ return -ENOMEM;
+
+ drvdata->name = pdata->name;
+ drvdata->num_supplies = pdata->num_supplies;
+ drvdata->supplies = pdata->supplies;
+
+ mutex_init(&drvdata->lock);
+
+ ret = regulator_bulk_get(&pdev->dev, drvdata->num_supplies,
+ drvdata->supplies);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to get supplies: %d\n", ret);
+ goto err_alloc_supplies;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(attributes); i++) {
+ ret = device_create_file(&pdev->dev, attributes[i]);
+ if (ret != 0)
+ goto err_create_attrs;
+ }
+
+ if (pdata->init_on)
+ ret = regulator_bulk_enable(drvdata->num_supplies,
+ drvdata->supplies);
+
+ drvdata->enabled = pdata->init_on;
+
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to set initial state: %d\n", ret);
+ goto err_create_attrs;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+ return 0;
+
+err_create_attrs:
+ for (i = 0; i < ARRAY_SIZE(attributes); i++)
+ device_remove_file(&pdev->dev, attributes[i]);
+
+ regulator_bulk_free(drvdata->num_supplies, drvdata->supplies);
+
+err_alloc_supplies:
+ kfree(drvdata);
+ return ret;
+}
+
+static int regulator_userspace_consumer_remove(struct platform_device *pdev)
+{
+ struct userspace_consumer_data *data = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(attributes); i++)
+ device_remove_file(&pdev->dev, attributes[i]);
+
+ if (data->enabled)
+ regulator_bulk_disable(data->num_supplies, data->supplies);
+
+ regulator_bulk_free(data->num_supplies, data->supplies);
+ kfree(data);
+
+ return 0;
+}
+
+static struct platform_driver regulator_userspace_consumer_driver = {
+ .probe = regulator_userspace_consumer_probe,
+ .remove = regulator_userspace_consumer_remove,
+ .driver = {
+ .name = "reg-userspace-consumer",
+ },
+};
+
+
+static int __init regulator_userspace_consumer_init(void)
+{
+ return platform_driver_register(&regulator_userspace_consumer_driver);
+}
+module_init(regulator_userspace_consumer_init);
+
+static void __exit regulator_userspace_consumer_exit(void)
+{
+ platform_driver_unregister(&regulator_userspace_consumer_driver);
+}
+module_exit(regulator_userspace_consumer_exit);
+
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("Userspace consumer for voltage and current regulators");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
index 71403fa3ffa1..e7db5664722e 100644
--- a/drivers/regulator/virtual.c
+++ b/drivers/regulator/virtual.c
@@ -347,3 +347,4 @@ module_exit(regulator_virtual_consumer_exit);
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("Virtual regulator consumer");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:reg-virt-consumer");
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 771eca1066b5..17a00b0fafd1 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -1570,3 +1570,4 @@ module_exit(wm8350_regulator_exit);
MODULE_AUTHOR("Liam Girdwood");
MODULE_DESCRIPTION("WM8350 voltage and current regulator driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-regulator");
diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c
index 157426029071..d9a2c988c6e7 100644
--- a/drivers/regulator/wm8400-regulator.c
+++ b/drivers/regulator/wm8400-regulator.c
@@ -320,7 +320,7 @@ static int __devinit wm8400_regulator_probe(struct platform_device *pdev)
struct regulator_dev *rdev;
rdev = regulator_register(&regulators[pdev->id], &pdev->dev,
- pdev->dev.platform_data, pdev->dev.driver_data);
+ pdev->dev.platform_data, dev_get_drvdata(&pdev->dev));
if (IS_ERR(rdev))
return PTR_ERR(rdev);
@@ -359,7 +359,7 @@ static struct platform_driver wm8400_regulator_driver = {
int wm8400_register_regulator(struct device *dev, int reg,
struct regulator_init_data *initdata)
{
- struct wm8400 *wm8400 = dev->driver_data;
+ struct wm8400 *wm8400 = dev_get_drvdata(dev);
if (wm8400->regulators[reg].name)
return -EBUSY;
@@ -369,8 +369,8 @@ int wm8400_register_regulator(struct device *dev, int reg,
wm8400->regulators[reg].name = "wm8400-regulator";
wm8400->regulators[reg].id = reg;
wm8400->regulators[reg].dev.parent = dev;
- wm8400->regulators[reg].dev.driver_data = wm8400;
wm8400->regulators[reg].dev.platform_data = initdata;
+ dev_set_drvdata(&wm8400->regulators[reg].dev, wm8400);
return platform_device_register(&wm8400->regulators[reg]);
}
@@ -380,7 +380,7 @@ static int __init wm8400_regulator_init(void)
{
return platform_driver_register(&wm8400_regulator_driver);
}
-module_init(wm8400_regulator_init);
+subsys_initcall(wm8400_regulator_init);
static void __exit wm8400_regulator_exit(void)
{
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 40a3a2afbfe7..7a868bd16e0e 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -1,13 +1,12 @@
/*
- * xilinxfb.c
- *
- * Xilinx TFT LCD frame buffer driver
+ * Xilinx TFT frame buffer driver
*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* 2002-2007 (c) MontaVista Software, Inc.
* 2007 (c) Secret Lab Technologies, Ltd.
+ * 2009 (c) Xilinx Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -24,33 +23,38 @@
#include <linux/device.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/version.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#if defined(CONFIG_OF)
#include <linux/of_device.h>
#include <linux/of_platform.h>
-#endif
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/xilinxfb.h>
+#include <asm/dcr.h>
#define DRIVER_NAME "xilinxfb"
-#define DRIVER_DESCRIPTION "Xilinx TFT LCD frame buffer driver"
+
/*
* Xilinx calls it "PLB TFT LCD Controller" though it can also be used for
- * the VGA port on the Xilinx ML40x board. This is a hardware display controller
- * for a 640x480 resolution TFT or VGA screen.
+ * the VGA port on the Xilinx ML40x board. This is a hardware display
+ * controller for a 640x480 resolution TFT or VGA screen.
*
* The interface to the framebuffer is nice and simple. There are two
* control registers. The first tells the LCD interface where in memory
* the frame buffer is (only the 11 most significant bits are used, so
* don't start thinking about scrolling). The second allows the LCD to
* be turned on or off as well as rotated 180 degrees.
+ *
+ * In case of direct PLB access the second control register will be at
+ * an offset of 4 as compared to the DCR access where the offset is 1
+ * i.e. REG_CTRL. So this is taken care in the function
+ * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of
+ * direct PLB access.
*/
#define NUM_REGS 2
#define REG_FB_ADDR 0
@@ -107,17 +111,28 @@ static struct fb_var_screeninfo xilinx_fb_var = {
.activate = FB_ACTIVATE_NOW
};
+
+#define PLB_ACCESS_FLAG 0x1 /* 1 = PLB, 0 = DCR */
+
struct xilinxfb_drvdata {
struct fb_info info; /* FB driver info record */
- u32 regs_phys; /* phys. address of the control registers */
- u32 __iomem *regs; /* virt. address of the control registers */
+ phys_addr_t regs_phys; /* phys. address of the control
+ registers */
+ void __iomem *regs; /* virt. address of the control
+ registers */
+
+ dcr_host_t dcr_host;
+ unsigned int dcr_start;
+ unsigned int dcr_len;
void *fb_virt; /* virt. address of the frame buffer */
dma_addr_t fb_phys; /* phys. address of the frame buffer */
int fb_alloced; /* Flag, was the fb memory alloced? */
+ u8 flags; /* features of the driver */
+
u32 reg_ctrl_default;
u32 pseudo_palette[PALETTE_ENTRIES_NO];
@@ -128,14 +143,19 @@ struct xilinxfb_drvdata {
container_of(_info, struct xilinxfb_drvdata, info)
/*
- * The LCD controller has DCR interface to its registers, but all
- * the boards and configurations the driver has been tested with
- * use opb2dcr bridge. So the registers are seen as memory mapped.
- * This macro is to make it simple to add the direct DCR access
- * when it's needed.
+ * The XPS TFT Controller can be accessed through PLB or DCR interface.
+ * To perform the read/write on the registers we need to check on
+ * which bus its connected and call the appropriate write API.
*/
-#define xilinx_fb_out_be32(driverdata, offset, val) \
- out_be32(driverdata->regs + offset, val)
+static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset,
+ u32 val)
+{
+ if (drvdata->flags & PLB_ACCESS_FLAG)
+ out_be32(drvdata->regs + (offset << 2), val);
+ else
+ dcr_write(drvdata->dcr_host, offset, val);
+
+}
static int
xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
@@ -203,35 +223,34 @@ static struct fb_ops xilinxfb_ops =
* Bus independent setup/teardown
*/
-static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
+static int xilinxfb_assign(struct device *dev,
+ struct xilinxfb_drvdata *drvdata,
+ unsigned long physaddr,
struct xilinxfb_platform_data *pdata)
{
- struct xilinxfb_drvdata *drvdata;
int rc;
int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL;
- /* Allocate the driver data region */
- drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
- if (!drvdata) {
- dev_err(dev, "Couldn't allocate device private record\n");
- return -ENOMEM;
- }
- dev_set_drvdata(dev, drvdata);
-
- /* Map the control registers in */
- if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
- dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
- physaddr);
- rc = -ENODEV;
- goto err_region;
- }
- drvdata->regs_phys = physaddr;
- drvdata->regs = ioremap(physaddr, 8);
- if (!drvdata->regs) {
- dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
- physaddr);
- rc = -ENODEV;
- goto err_map;
+ if (drvdata->flags & PLB_ACCESS_FLAG) {
+ /*
+ * Map the control registers in if the controller
+ * is on direct PLB interface.
+ */
+ if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
+ dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
+ physaddr);
+ rc = -ENODEV;
+ goto err_region;
+ }
+
+ drvdata->regs_phys = physaddr;
+ drvdata->regs = ioremap(physaddr, 8);
+ if (!drvdata->regs) {
+ dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
+ physaddr);
+ rc = -ENODEV;
+ goto err_map;
+ }
}
/* Allocate the framebuffer memory */
@@ -247,7 +266,10 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
if (!drvdata->fb_virt) {
dev_err(dev, "Could not allocate frame buffer memory\n");
rc = -ENOMEM;
- goto err_fbmem;
+ if (drvdata->flags & PLB_ACCESS_FLAG)
+ goto err_fbmem;
+ else
+ goto err_region;
}
/* Clear (turn to black) the framebuffer */
@@ -260,7 +282,8 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
if (pdata->rotate_screen)
drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
- xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
+ xilinx_fb_out_be32(drvdata, REG_CTRL,
+ drvdata->reg_ctrl_default);
/* Fill struct fb_info */
drvdata->info.device = dev;
@@ -296,11 +319,14 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
goto err_regfb;
}
+ if (drvdata->flags & PLB_ACCESS_FLAG) {
+ /* Put a banner in the log (for DEBUG) */
+ dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr,
+ drvdata->regs);
+ }
/* Put a banner in the log (for DEBUG) */
- dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
- dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
- (unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
- fbsize);
+ dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
+ (void *)drvdata->fb_phys, drvdata->fb_virt, fbsize);
return 0; /* success */
@@ -311,14 +337,19 @@ err_cmap:
if (drvdata->fb_alloced)
dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt,
drvdata->fb_phys);
+ else
+ iounmap(drvdata->fb_virt);
+
/* Turn off the display */
xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
err_fbmem:
- iounmap(drvdata->regs);
+ if (drvdata->flags & PLB_ACCESS_FLAG)
+ iounmap(drvdata->regs);
err_map:
- release_mem_region(physaddr, 8);
+ if (drvdata->flags & PLB_ACCESS_FLAG)
+ release_mem_region(physaddr, 8);
err_region:
kfree(drvdata);
@@ -342,12 +373,18 @@ static int xilinxfb_release(struct device *dev)
if (drvdata->fb_alloced)
dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len),
drvdata->fb_virt, drvdata->fb_phys);
+ else
+ iounmap(drvdata->fb_virt);
/* Turn off the display */
xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
- iounmap(drvdata->regs);
- release_mem_region(drvdata->regs_phys, 8);
+ /* Release the resources, as allocated based on interface */
+ if (drvdata->flags & PLB_ACCESS_FLAG) {
+ iounmap(drvdata->regs);
+ release_mem_region(drvdata->regs_phys, 8);
+ } else
+ dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
kfree(drvdata);
dev_set_drvdata(dev, NULL);
@@ -356,77 +393,57 @@ static int xilinxfb_release(struct device *dev)
}
/* ---------------------------------------------------------------------
- * Platform bus binding
- */
-
-static int
-xilinxfb_platform_probe(struct platform_device *pdev)
-{
- struct xilinxfb_platform_data *pdata;
- struct resource *res;
-
- /* Find the registers address */
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!res) {
- dev_err(&pdev->dev, "Couldn't get registers resource\n");
- return -ENODEV;
- }
-
- /* If a pdata structure is provided, then extract the parameters */
- pdata = &xilinx_fb_default_pdata;
- if (pdev->dev.platform_data) {
- pdata = pdev->dev.platform_data;
- if (!pdata->xres)
- pdata->xres = xilinx_fb_default_pdata.xres;
- if (!pdata->yres)
- pdata->yres = xilinx_fb_default_pdata.yres;
- if (!pdata->xvirt)
- pdata->xvirt = xilinx_fb_default_pdata.xvirt;
- if (!pdata->yvirt)
- pdata->yvirt = xilinx_fb_default_pdata.yvirt;
- }
-
- return xilinxfb_assign(&pdev->dev, res->start, pdata);
-}
-
-static int
-xilinxfb_platform_remove(struct platform_device *pdev)
-{
- return xilinxfb_release(&pdev->dev);
-}
-
-
-static struct platform_driver xilinxfb_platform_driver = {
- .probe = xilinxfb_platform_probe,
- .remove = xilinxfb_platform_remove,
- .driver = {
- .owner = THIS_MODULE,
- .name = DRIVER_NAME,
- },
-};
-
-/* ---------------------------------------------------------------------
* OF bus binding
*/
-#if defined(CONFIG_OF)
static int __devinit
xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
{
- struct resource res;
const u32 *prop;
+ u32 *p;
+ u32 tft_access;
struct xilinxfb_platform_data pdata;
+ struct resource res;
int size, rc;
+ int start = 0, len = 0;
+ dcr_host_t dcr_host;
+ struct xilinxfb_drvdata *drvdata;
/* Copy with the default pdata (not a ptr reference!) */
pdata = xilinx_fb_default_pdata;
dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match);
- rc = of_address_to_resource(op->node, 0, &res);
- if (rc) {
- dev_err(&op->dev, "invalid address\n");
- return rc;
+ /*
+ * To check whether the core is connected directly to DCR or PLB
+ * interface and initialize the tft_access accordingly.
+ */
+ p = (u32 *)of_get_property(op->node, "xlnx,dcr-splb-slave-if", NULL);
+
+ if (p)
+ tft_access = *p;
+ else
+ tft_access = 0; /* For backward compatibility */
+
+ /*
+ * Fill the resource structure if its direct PLB interface
+ * otherwise fill the dcr_host structure.
+ */
+ if (tft_access) {
+ rc = of_address_to_resource(op->node, 0, &res);
+ if (rc) {
+ dev_err(&op->dev, "invalid address\n");
+ return -ENODEV;
+ }
+
+ } else {
+ start = dcr_resource_start(op->node, 0);
+ len = dcr_resource_len(op->node, 0);
+ dcr_host = dcr_map(op->node, start, len);
+ if (!DCR_MAP_OK(dcr_host)) {
+ dev_err(&op->dev, "invalid address\n");
+ return -ENODEV;
+ }
}
prop = of_get_property(op->node, "phys-size", &size);
@@ -450,7 +467,26 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
if (of_find_property(op->node, "rotate-display", NULL))
pdata.rotate_screen = 1;
- return xilinxfb_assign(&op->dev, res.start, &pdata);
+ /* Allocate the driver data region */
+ drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata) {
+ dev_err(&op->dev, "Couldn't allocate device private record\n");
+ return -ENOMEM;
+ }
+ dev_set_drvdata(&op->dev, drvdata);
+
+ if (tft_access)
+ drvdata->flags |= PLB_ACCESS_FLAG;
+
+ /* Arguments are passed based on the interface */
+ if (drvdata->flags & PLB_ACCESS_FLAG) {
+ return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata);
+ } else {
+ drvdata->dcr_start = start;
+ drvdata->dcr_len = len;
+ drvdata->dcr_host = dcr_host;
+ return xilinxfb_assign(&op->dev, drvdata, 0, &pdata);
+ }
}
static int __devexit xilinxfb_of_remove(struct of_device *op)
@@ -460,7 +496,9 @@ static int __devexit xilinxfb_of_remove(struct of_device *op)
/* Match table for of_platform binding */
static struct of_device_id xilinxfb_of_match[] __devinitdata = {
+ { .compatible = "xlnx,xps-tft-1.00.a", },
{ .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
+ { .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", },
{},
};
MODULE_DEVICE_TABLE(of, xilinxfb_of_match);
@@ -476,22 +514,6 @@ static struct of_platform_driver xilinxfb_of_driver = {
},
};
-/* Registration helpers to keep the number of #ifdefs to a minimum */
-static inline int __init xilinxfb_of_register(void)
-{
- pr_debug("xilinxfb: calling of_register_platform_driver()\n");
- return of_register_platform_driver(&xilinxfb_of_driver);
-}
-
-static inline void __exit xilinxfb_of_unregister(void)
-{
- of_unregister_platform_driver(&xilinxfb_of_driver);
-}
-#else /* CONFIG_OF */
-/* CONFIG_OF not enabled; do nothing helpers */
-static inline int __init xilinxfb_of_register(void) { return 0; }
-static inline void __exit xilinxfb_of_unregister(void) { }
-#endif /* CONFIG_OF */
/* ---------------------------------------------------------------------
* Module setup and teardown
@@ -500,28 +522,18 @@ static inline void __exit xilinxfb_of_unregister(void) { }
static int __init
xilinxfb_init(void)
{
- int rc;
- rc = xilinxfb_of_register();
- if (rc)
- return rc;
-
- rc = platform_driver_register(&xilinxfb_platform_driver);
- if (rc)
- xilinxfb_of_unregister();
-
- return rc;
+ return of_register_platform_driver(&xilinxfb_of_driver);
}
static void __exit
xilinxfb_cleanup(void)
{
- platform_driver_unregister(&xilinxfb_platform_driver);
- xilinxfb_of_unregister();
+ of_unregister_platform_driver(&xilinxfb_of_driver);
}
module_init(xilinxfb_init);
module_exit(xilinxfb_cleanup);
MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
-MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
+MODULE_DESCRIPTION("Xilinx TFT frame buffer driver");
MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 00:47:59 +0100